gdb/Makefile.dist

   1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
   2
   3 # This file is part of GDB.
   4
   5 # GDB is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 1, or (at your option)
   8 # any later version.
   9
  10 # GDB is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14
  15 # You should have received a copy of the GNU General Public License
  16 # along with GDB; see the file COPYING.  If not, write to
  17 # the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  18
  19 # Place to install binaries.
  20 bindir=/usr/local/bin
  21
  22 # System V: If you compile gdb with a compiler which uses the coff
  23 # encapsulation feature (this is a function of the compiler used, NOT
  24 # of the m-?.h file selected by config.gdb), you must make sure that
  25 # the GNU nm is the one that is used by munch.
  26
  27 # If you are compiling with GCC, make sure that either 1) You use the
  28 # -traditional flag, or 2) You have the fixed include files where GCC
  29 # can reach them.  Otherwise the ioctl calls in inflow.c and readline.c
  30 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  31 # distribution will fix your include files up.
  32 #CC=cc
  33 #CC=gcc -traditional
  34 GCC=gcc
  35
  36 VPATH=$(srcdir)
  37
  38 # It is also possible that you will need to add -I/usr/include/sys to the
  39 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
  40 # is where it should be according to Posix).
  41
  42 YACC=bison -y
  43 # YACC=yacc
  44 SHELL=/bin/sh
  45 MAKE=make
  46 # We need either GNU m4 or SysV m4; Berkeley/Sun don't have quite enough.
  47 #M4=gm4
  48 M4=/usr/5bin/m4
  49
  50 # Set this up with gcc if you have gnu ld and the loader will print out
  51 # line numbers for undefinded refs.
  52 #CC-LD=gcc -static
  53 CC-LD=${CC}
  54
  55 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
  56 # (useful for debugging memory allocation problems in gdb).  To use your
  57 # system malloc, uncomment the following two lines.
  58 #GNU_MALLOC =
  59 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
  60 GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
  61 MALLOC_CFLAGS =
  62
  63 # Where is the "include" directory?  Traditionally ../include or ./include
  64 INCLUDE_DIR =  ${srcdir}/../include
  65 INCLUDE_DEP = $$(INCLUDE_DIR)
  66
  67 # Where is the source dir for the BFD library?  Traditionally ../bfd or ./bfd
  68 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
  69 BFD_DIR =  ${srcdir}/../bfd
  70 BFD_DEP = $$(BFD_DIR)
  71
  72 # All the includes used for CFLAGS and for lint.
  73 # -I. for config files.
  74 # -I${srcdir} possibly for regex.h also.
  75 INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I${srcdir}/vx-share
  76
  77 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
  78 # CFLAGS for both GDB and readline.
  79 GLOBAL_CFLAGS = -g ${TM_CFLAGS} ${XM_CFLAGS}
  80 #PROFILE_CFLAGS = -pg
  81
  82 CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
  83 # None of the things in CFLAGS will do any harm, and on some systems
  84 #  (e.g. SunOS4) it is important to use the M_CFLAGS.
  85 LDFLAGS = $(CFLAGS)
  86
  87 # Where is the "-liberty" library, containing getopt and obstack?
  88 LIBIBERTY_DIR = ${srcdir}/../libiberty
  89 LIBIBERTY = ${LIBIBERTY_DIR}${subdir}/libiberty.a
  90
  91 # Flags that describe where you can find the termcap library.
  92 # You may need to make other arrangements for USG.
  93 TERMCAP = -ltermcap
  94
  95 # You must define REGEX and REGEX1 on USG machines.
  96 # If your sysyem is missing alloca(), or, more likely, it's there but
  97 # it doesn't work, define ALLOCA & ALLOCA1
  98
  99 # {X,T}M_CLIBS, if defined, has system-dependent libs
 100 # For example, -lPW for System V to get alloca().
 101 # FIXME STOPGAP FOR BFD LIBRARY: BFD stuff
 102 CLIBS = ${TERMCAP} $(XM_CLIBS) ${TM_CLIBS} ${BFD_DIR}${subdir}/libbfd.a \
 103         ${LIBIBERTY}
 104 CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_DIR}/libbfd.a \
 105         ${LIBIBERTY}
 106
 107 ADD_FILES = ${REGEX} ${ALLOCA} ${GNU_MALLOC}
 108 ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC}
 109
 110 VERSION = 3.95
 111 DIST=gdb-$(VERSION)
 112
 113 LINT=/usr/5bin/lint
 114 LINTFLAGS=
 115
 116 # Source files in the main directory.
 117 # Files which are included via a tconfig/* or xconfig/* file
 118 # should *not* be specified here; they're in "ALLDEPFILES".
 119 SFILES_MAINDIR = \
 120          blockframe.c breakpoint.c command.c core.c \
 121          environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
 122          main.c printcmd.c \
 123          remote.c source.c stack.c symmisc.c symtab.c symfile.c \
 124          utils.c valarith.c valops.c valprint.c values.c expread.y \
 125          signame.c cplus-dem.c mem-break.c target.c inftarg.c \
 126          dbxread.c coffread.c \
 127          ieee-float.c
 128
 129 # Source files in subdirectories (which will be handled separately by
 130 #  'make gdb.tar.Z').
 131 # Files which are included via a tconfig/* or xconfig/* file
 132 # should *not* be specified here; they're in "ALLDEPFILES".
 133 SFILES_SUBDIR = \
 134          ${srcdir}/vx-share/dbgRpcLib.h \
 135          ${srcdir}/vx-share/ptrace.h \
 136          ${srcdir}/vx-share/reg.h \
 137          ${srcdir}/vx-share/vxTypes.h \
 138          ${srcdir}/vx-share/vxWorks.h \
 139          ${srcdir}/vx-share/wait.h \
 140          ${srcdir}/vx-share/xdr_ld.h \
 141          ${srcdir}/vx-share/xdr_ptrace.h \
 142          ${srcdir}/vx-share/xdr_rdb.h \
 143          ${srcdir}/vx-share/xdr_regs.h \
 144          ${srcdir}/nindy-share/Makefile \
 145          ${srcdir}/nindy-share/VERSION \
 146          ${srcdir}/nindy-share/b.out.h \
 147          ${srcdir}/nindy-share/block_io.h \
 148          ${srcdir}/nindy-share/coff.h \
 149          ${srcdir}/nindy-share/demux.h \
 150          ${srcdir}/nindy-share/env.h \
 151          ${srcdir}/nindy-share/stop.h \
 152          ${srcdir}/nindy-share/ttycntl.h
 153
 154 # All source files that go into linking GDB, except config-specified files.
 155 SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
 156
 157 # All source files that lint should look at
 158 LINTFILES = $(SFILES) expread.tab.c init.c
 159
 160 # Any additional files specified on these lines should also be added to
 161 # the OTHERS = definition below, so they go in the tar files.
 162 SFILES_STAND = $(SFILES) standalone.c
 163 SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
 164
 165 # Header files that are not named in tconfig/* or xconfig/* go here.
 166 HFILES= breakpoint.h command.h defs.h environ.h \
 167         expression.h frame.h gdbcmd.h gdbcore.h \
 168         getpagesize.h ieee-float.h inferior.h param-no-tm.h param.h \
 169         signals.h signame.h symfile.h symtab.h \
 170         target.h tdesc.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
 171         value.h
 172
 173 OPCODES = pn-opcode.h np1-opcode.h sparc-opcode.h vax-opcode.h m68k-opcode.h \
 174           ns32k-opcode.h convx-opcode.h pyr-opcode.h mips-opcode.h \
 175           am29k-opcode.h
 176
 177 REMOTE_EXAMPLES = rem-m68k.shar rem-multi.shar
 178
 179 MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
 180             ansidecl.h stdlib.h gmalloc.h stddef.h
 181
 182 POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
 183 POSSLIBS = $(POSSLIBS_MAINDIR)
 184
 185 TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
 186
 187 # tdesc-lib cannot be named simply tdesc, because if if it were GNU make
 188 # would try to make it from tdesc.c.
 189 # tdesc-lib removed from the list due to Motorola copyrights...gnu@cygnus.com
 190 OTHERS = Makefile.dist depend alldeps.mak Makefile.sdir \
 191          createtags munch config.gdb config.status \
 192          ChangeLog ChangeLog-3.x \
 193          README TODO TAGS WHATS.NEW \
 194          doc \
 195         .gdbinit COPYING expread.tab.c stab.def \
 196          copying.c Projects Convex.notes copying.awk \
 197          saber.suppress standalone.c stuff.c kdb-start.c \
 198          hp-include # tests
 199
 200 DEPFILES= ${TDEPFILES} ${XDEPFILES}
 201
 202 SOURCES=$(SFILES) $(ALLDEPFILES)
 203 TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
 204 TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
 205              ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
 206 TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
 207
 208 OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
 209     values.o eval.o valops.o valarith.o valprint.o printcmd.o \
 210     symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
 211     command.o utils.o expread.o expprint.o environ.o version.o \
 212     copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
 213     inftarg.o ieee-float.o putenv.o \
 214     dbxread.o coffread.o # mipsread.o
 215
 216 RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
 217
 218 TSOBS = core.o inflow.o
 219
 220 NTSOBS = standalone.o
 221
 222 TSSTART = /lib/crt0.o
 223
 224 NTSSTART = kdb-start.o
 225
 226 RL_LIB = readline/libreadline.a
 227 RL_LIB_DEP = $(RL_LIB)
 228
 229 # Prevent Sun make from putting in the machine type.  Setting
 230 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
 231 .c.o:
 232         ${CC} -c ${CFLAGS} $<
 233
 234 all: gdb
 235
 236 install: gdb
 237         cp gdb $(bindir)/gdb.new
 238         mv $(bindir)/gdb.new $(bindir)/gdb
 239         $(M_INSTALL)
 240
 241 init.c: $(srcdir)/munch $(MUNCH_DEFINE) $(OBS) $(TSOBS)
 242         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
 243
 244 gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${RL_LIB_DEP} ${CDEPS} init.o
 245         ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
 246         ${RL_LIB} $(CLIBS)
 247
 248 saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
 249         #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
 250         #load ./init.c $(SFILES)
 251         #unload ${srcdir}/expread.y ${srcdir}/vx-share/*.h
 252         #unload ${srcdir}/nindy-share/[A-Z]*
 253         #load ${srcdir}/expread.tab.c readline/libreadline.a
 254         #load copying.c version.c
 255         #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
 256         #load ${LIBIBERTY_DIR}/*.c
 257         #load ${BFD_DIR}/*.c
 258         #load -ltermcap
 259         ##void mcheck(a) void (*a)(); { }
 260         ##void mtrace() { }
 261
 262
 263
 264 # This is useful when debugging GDB, because some Unix's don't let you run GDB
 265 # on itself without copying the executable.  So "make gdb1" will make
 266 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
 267 # Removing gdb1 before the copy is the right thing if gdb1 is open
 268 # in another process.
 269 gdb1: gdb
 270         rm -f gdb1
 271         cp gdb gdb1
 272
 273 # This is a remote stub which runs under unix and starts up an
 274 # inferior process.  This is at least useful for debugging GDB's
 275 # remote support.
 276 rapp: $(RAPP_OBS)
 277         rm -f rapp_init.c
 278         ${srcdir}/munch ${RAPP_OBS} > rapp_init.c
 279         ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
 280
 281 Makefiles= Makefile.sdir $(M_MAKEFILE) \
 282         ${srcdir}/alldeps.mak ${srcdir}/Makefile.dist
 283
 284 MAKE_MAKEFILE= echo "M_MAKEFILE=$(M_MAKEFILE)" | \
 285         cat - ${Makefiles} ${srcdir}/depend >Makefile
 286
 287 Makefile: $(Makefiles)
 288         $(MAKE_MAKEFILE)
 289
 290 alldeps.mak: ${srcdir}/tconfig ${srcdir}/xconfig
 291         rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
 292         for i in `ls -d ${srcdir}/tconfig/*[0-9A-Za-z] \
 293           ${srcdir}/xconfig/*[0-9A-Za-z] | grep -v RCS` ; do \
 294           echo $$i >>allconfig.tmp; \
 295           awk <$$i ' \
 296             $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
 297               for (i = 2; i <= NF; i++) \
 298                 print $$i >> "alldeps.tmp" ; \
 299             } \
 300             $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
 301               print $$2 >> "allparam.tmp" }' ; \
 302         done
 303         sort <alldeps.tmp | uniq | \
 304           sed -e 's/arm-convert.o/arm-convert.s/' \
 305               -e 's!^Onindy.o!nindy-share/Onindy.c!' \
 306               -e 's!^nindy.o!nindy-share/nindy.c!' \
 307               -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
 308               -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
 309               -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
 310               -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
 311               -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
 312               -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
 313               -e 's/\.o/.c/' \
 314             >alldeps2.tmp
 315         echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
 316             >>alldeps.mak;
 317         grep -v / alldeps2.tmp | \
 318           awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
 319             NR == 0 {printf $$0;} \
 320             NR != 0 {printf "\\\n" $$0} \
 321             END {printf "\n\n"}' >>alldeps.mak;
 322         grep / alldeps2.tmp | \
 323           awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
 324             NR == 0 {printf $$0;} \
 325             NR != 0 {printf "\\\n" $$0} \
 326             END {printf "\n\n"}' >>alldeps.mak;
 327         sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
 328             NR == 0 {printf $$0;} \
 329             NR != 0 {printf "\\\n" $$0} \
 330             END {printf "\n\n"}' >>alldeps.mak;
 331         sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
 332             NR == 0 {printf $$0;} \
 333             NR != 0 {printf "\\\n" $$0} \
 334             END {printf "\n\n"}' >>alldeps.mak;
 335         rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
 336
 337 # The sed script makes everything which depends on {x,t}m.h depend on
 338 # config.status as well, in case someone reconfigures gdb out from
 339 # under an already compiled gdb.
 340 depend: $(SOURCES) Makefile.dist
 341         @echo Ignore errors about non-existent system-supplied include files
 342         @echo for systems other than the one you are using.
 343         @echo "If xm.h and tm.h don't exist, the error messages saying so"
 344         @echo can safely be ignored.
 345         @echo Also ignore parse errors in valops.c, and any errors in
 346         @echo arm-convert.s.
 347         -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
 348             `ls $(SOURCES) | sort -u` >depend.tmp
 349         <depend.tmp sed -e 's/ [xt]m.h/& config.status/g'  \
 350           -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
 351           -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
 352           -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
 353           -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
 354           -e 's; \./; $${srcdir}/;g'  \
 355           >depend
 356         $(MAKE_MAKEFILE)
 357         rm depend.tmp
 358
 359 config.status:
 360         @echo "You must configure gdb.  Look at the README file for details."
 361         @false
 362
 363 # These are not generated by "make depend" because they only are there
 364 # for some machines.
 365 # But these rules don't do what we want; we want to hack the foo.o: tm.h
 366 # dependency to do the right thing.
 367 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h : tm-68k.h
 368 tm-hp300hpux.h tm-sun2.h tm-3b1.h : tm-68k.h
 369 xm-news1000.h : xm-news.h
 370 xm-i386-sv32.h : xm-i386.h
 371 tm-i386gas.h: tm-i386.h
 372 xm-sun4os4.h : xm-sparc.h
 373 tm-sun4os4.h : tm-sparc.h
 374
 375 kdb : $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${RL_LIB_DEP}
 376         rm -f init.c
 377         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
 378         $(CC) $(LDFLAGS) -c init.c $(CLIBS)
 379         ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
 380         ${RL_LIB} -lc $(CLIBS)
 381
 382 # Put the proper machine-specific files first.
 383 # createtags will edit the .o in DEPFILES into .c
 384 TAGS: ${TAGFILES}
 385         $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
 386 tags: TAGS
 387
 388 # FIXME: Get alldeps.mak up to date, config.gdb none, THEN make gdb.tar.Z!
 389 gdb.tar.Z: ${TARFILES}
 390         rm -f gdb.tar; rm -rf $(DIST)
 391         cd readline ; make readline.tar
 392         mkdir $(DIST)
 393         cd $(DIST) ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
 394         mkdir $(DIST)/readline
 395         cd $(DIST)/readline ; tar xf ../../readline/readline.tar
 396         mkdir $(DIST)/xconfig ${DIST}/tconfig
 397         cd $(DIST)/tconfig ; \
 398           for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
 399         mkdir $(DIST)/vx-share $(DIST)/nindy-share
 400         cd $(DIST)/tconfig ; \
 401           for i in $(SFILES_SUBDIR) $(ALLDEPFILES_SUBDIR); \
 402             do ln -s ../../$$i ../$$i ; done
 403         tar chf - $(DIST) | compress >gdb.tar.Z
 404         rm -rf $(DIST)
 405
 406 clean:
 407         rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
 408         rm -f init.c init.o version.c
 409         rm -f gdb core gdb.tar gdb.tar.Z make.log
 410         rm -f gdb[0-9]
 411         rm -f gdb.dvi gdb-all*
 412         cd readline ; make clean
 413
 414 distclean: clean expread.tab.c TAGS
 415         rm -f tm.h xm.h config.status
 416         rm -f y.output yacc.acts yacc.tmp
 417         rm -f ${TESTS} Makefile
 418
 419 realclean: clean
 420         rm -f expread.tab.c TAGS
 421         rm -f tm.h xm.h config.status
 422         rm -f Makefile
 423
 424 gdb-all.texinfo: ${srcdir}/doc/gdb.texinfo
 425         ${M4} $(srcdir)/doc/pretex.m4 $(srcdir)/doc/none.m4 $(srcdir)/doc/all.m4 $(srcdir)/doc/gdb.texinfo >gdb-all.texinfo
 426
 427 gdb.dvi : gdb-all.texinfo
 428         tex gdb-all.texinfo
 429         texindex gdb-all.??
 430         tex gdb-all.texinfo
 431         mv gdb-all.dvi gdb.dvi
 432         rm -f gdb-all.?? gdb-all.???
 433
 434 # This should work eventually, but we're using texinfo2, and many makeinfo's
 435 # can't cope with all the markup.  In the meantime, we distribute the info
 436 # files as formatted by the elisp texinfo2 code.
 437 #gdb.info: gdb-all.texinfo
 438 #       makeinfo gdb-all.texinfo
 439
 440 # Make copying.c from COPYING
 441 copying.c : COPYING copying.awk
 442         awk -f copying.awk < COPYING > copying.c
 443
 444 version.c : Makefile.dist
 445         echo 'char *version = "$(VERSION)";' >version.c
 446
 447 ${srcdir}/expread.tab.c : $(srcdir)/expread.y
 448         @echo 'Expect 4 shift/reduce conflict.'
 449         ${YACC} $(srcdir)/expread.y
 450         mv y.tab.c ${srcdir}/expread.tab.c
 451
 452 expread.o : ${srcdir}/expread.tab.c defs.h param.h symtab.h \
 453             frame.h expression.h
 454         $(CC) -c ${CFLAGS} `echo ${srcdir}/expread.tab.c | sed 's,^\./,,'`
 455         mv expread.tab.o expread.o
 456
 457 # dbxread, coffread, mipsread have dependencies on BFD header files.
 458 dbxread.o: ${srcdir}/dbxread.c
 459         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
 460
 461 coffread.o: ${srcdir}/coffread.c
 462         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
 463
 464 mipsread.o: ${srcdir}/mipsread.c
 465         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
 466
 467 # Drag in the files that are in another directory.
 468
 469 xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
 470         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
 471
 472 xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
 473         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
 474
 475 xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
 476         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
 477
 478 xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
 479         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
 480
 481 nindy.o: ${srcdir}/nindy-share/nindy.c
 482         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
 483
 484 Onindy.o: ${srcdir}/nindy-share/Onindy.c
 485         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
 486
 487 ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
 488         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
 489
 490 ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
 491         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
 492
 493 tdesc-lib/libdc.o : force_update
 494         cd tdesc-lib ; ${MAKE} "SYSV_DEFINE=${SYSV_DEFINE}"
 495
 496 # In LOCAL_INCLUDES, -I${srcdir} is right if srcdir is an absolute path,
 497 # and -I../${srcdir} is right if it is relative (e.g. ".."), so search both.
 498 readline/libreadline.a : force_update
 499         cd readline ; ${MAKE} "SYSV=${SYSV_DEFINE}"\
 500                 "VPATH=${srcdir}/readline:../${srcdir}/readline"\
 501                 "LOCAL_INCLUDES=-I../ -I${srcdir}/ -I../${srcdir}/"\
 502                 "DEBUG_FLAGS=${GLOBAL_CFLAGS}" "CC=${CC}" libreadline.a
 503
 504 lint: $(LINTFILES)
 505         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES)
 506
 507 gdb.cxref: $(SFILES)
 508         cxref -I. $(SFILES) >gdb.cxref
 509
 510 force_update :
 511
 512 # When used with GDB, the demangler should never look for leading
 513 # underscores because GDB strips them off during symbol read-in.  Thus
 514 # -Dnounderscore.
 515
 516 cplus-dem.o : cplus-dem.c
 517         ${CC} -c ${CFLAGS} -Dnounderscore \
 518           `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`