1 #Copyright (C) 1989, 1990, 1991, 1992 Free Software Foundation, Inc.
3 # This file is part of GDB.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22 exec_prefix = $(prefix)
23 bindir = $(exec_prefix)/bin
24 libdir = $(exec_prefix)/lib
26 datadir = $(prefix)/lib
27 mandir = $(prefix)/man
28 man1dir = $(mandir)/man1
29 man2dir = $(mandir)/man2
30 man3dir = $(mandir)/man3
31 man4dir = $(mandir)/man4
32 man5dir = $(mandir)/man5
33 man6dir = $(mandir)/man6
34 man7dir = $(mandir)/man7
35 man8dir = $(mandir)/man8
36 man9dir = $(mandir)/man9
37 infodir = $(prefix)/info
38 includedir = $(prefix)/include
39 docdir
= $(datadir)/doc
44 INSTALL_PROGRAM
= $(INSTALL
)
45 INSTALL_DATA
= $(INSTALL
)
51 # Flags that describe where you can find the termcap library.
52 # This can be overridden in the host Makefile fragment file.
55 # System V: If you compile gdb with a compiler which uses the coff
56 # encapsulation feature (this is a function of the compiler used, NOT
57 # of the m-?.h file selected by config.gdb), you must make sure that
58 # the GNU nm is the one that is used by munch.
60 # If you are compiling with GCC, make sure that either 1) You use the
61 # -traditional flag, or 2) You have the fixed include files where GCC
62 # can reach them. Otherwise the ioctl calls in inflow.c
63 # will be incorrectly compiled. The "fixincludes" script in the gcc
64 # distribution will fix your include files up.
69 # Directory containing source files. Don't clean up the spacing,
70 # this exact string is matched for by the "configure" script.
73 # It is also possible that you will need to add -I/usr/include/sys to the
74 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
75 # is where it should be according to Posix).
80 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
81 # Berkeley/Sun don't have quite enough.
85 # where to find texinfo; GDB dist should include a recent one
86 TEXIDIR
=${srcdir}/..
/texinfo
/fsf
88 # where to find makeinfo, preferably one designed for texinfo-2
91 # Set this up with gcc if you have gnu ld and the loader will print out
92 # line numbers for undefinded refs.
96 # Where is the "include" directory? Traditionally ../include or ./include
97 INCLUDE_DIR
= ${srcdir}/..
/include
98 INCLUDE_DEP
= $$(INCLUDE_DIR
)
100 # Where is the source dir for the MMALLOC library? Traditionally ../mmalloc
101 # or ./mmalloc (When we want the binary library built from it, we use
102 # ${MMALLOC_DIR}${subdir}.)
103 # Note that mmalloc can still be used on systems without mmap().
104 # To use your system malloc, comment out the following defines.
105 MMALLOC_DIR
= ${srcdir}/..
/mmalloc
106 MMALLOC_DEP
= $$(MMALLOC_DIR
)
107 MMALLOC_LIB
= .
/..
/mmalloc
${subdir}/libmmalloc.a
108 # To use your system malloc, uncomment MMALLOC_DISABLE.
109 #MMALLOC_DISABLE = -DNO_MMALLOC
110 # To use mmalloc but disable corruption checking, uncomment MMALLOC_CHECK
111 #MMALLOC_CHECK = -DNO_MMALLOC_CHECK
112 MMALLOC_CFLAGS
= ${MMALLOC_CHECK} ${MMALLOC_DISABLE}
114 # Where is the source dir for the BFD library? Traditionally ../bfd or ./bfd
115 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
116 BFD_DIR
= ${srcdir}/..
/bfd
117 BFD_DEP
= $$(BFD_DIR
)
118 BFD_LIB
= .
/..
/bfd
${subdir}/libbfd.a
120 # Where is the source dir for the READLINE library? Traditionally in .. or .
121 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
122 READLINE_DIR
= ${srcdir}/..
/readline
123 READLINE_DEP
= $$(READLINE_DIR
)
124 RL_LIB
= .
/..
/readline
${subdir}/libreadline.a
126 # All the includes used for CFLAGS and for lint.
127 # -I. for config files.
128 # -I${srcdir} possibly for regex.h also.
129 INCLUDE_CFLAGS
= -I.
-I
${srcdir} -I
$(INCLUDE_DIR
)
131 # M{H,T}_CFLAGS, if defined, has host- and target-dependent CFLAGS
132 # from the config/ directory.
133 GLOBAL_CFLAGS
= ${MT_CFLAGS} ${MH_CFLAGS}
134 #PROFILE_CFLAGS = -pg
136 # CFLAGS is specifically reserved for setting from the command line
137 # when running make. I.E. "make USER_CFLAGS=-Wmissing-prototypes".
139 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
140 INTERNAL_CFLAGS
= ${CFLAGS} ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MMALLOC_CFLAGS} ${INCLUDE_CFLAGS} ${USER_CFLAGS}
141 # None of the things in CFLAGS will do any harm, and on some systems
142 # (e.g. SunOS4) it is important to use the M_CFLAGS.
145 # Where is the "-liberty" library, containing getopt and obstack?
146 LIBIBERTY_DIR
= ${srcdir}/..
/libiberty
147 LIBIBERTY
= .
/..
/libiberty
${subdir}/libiberty.a
149 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
150 # If your sysyem is missing alloca(), or, more likely, it's there but
151 # it doesn't work, define ALLOCA & ALLOCA1 too.
152 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
154 # Libraries and corresponding dependencies for compiling gdb.
155 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
156 # TERMCAP comes after readline, since readline depends on it.
157 CLIBS
= ${BFD_LIB} ${RL_LIB} ${TERMCAP} ${MMALLOC_LIB} ${LIBIBERTY} \
158 ${XM_CLIBS} ${TM_CLIBS}
159 CDEPS
= ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${MMALLOC_LIB} ${LIBIBERTY} \
160 ${RL_LIB} ${MMALLOC_LIB}
162 ADD_FILES
= ${REGEX} ${ALLOCA} ${XM_ADD_FILES} ${TM_ADD_FILES}
163 ADD_DEPS
= ${REGEX1} ${ALLOCA1} ${XM_ADD_FILES} ${TM_ADD_FILES}
169 LINTFLAGS
= -I
${BFD_DIR}
171 # Select demangler to use. Currently gdb only supports inclusion of a
172 # single demangler. The default demangler (cplus-dem.c) can demangle
173 # several different styles that differ in only minor details. See
174 # demangle.c information about selecting styles.
175 DEMANGLER
= cplus-dem
177 # Host and target-dependent makefile fragments come in here.
179 # End of host and target-dependent makefile fragments
181 # Source files in the main directory.
182 # Files which are included via a config/* Makefile fragment
183 # should *not* be specified here; they're in "ALLDEPFILES".
185 blockframe.c breakpoint.c command.c core.c demangle.c \
186 environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
187 main.c printcmd.c gdbtypes.c \
188 remote.c source.c stack.c symmisc.c symtab.c symfile.c \
189 utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
190 ${DEMANGLER}.c mem-break.c target.c inftarg.c \
191 dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c stabsread.c \
192 ieee-float.c language.c parse.c buildsym.c objfiles.c \
193 minsyms.c mipsread.c maint.c
195 # Source files in subdirectories (which will be handled separately by
197 # Files which are included via a config/* Makefile fragment
198 # should *not* be specified here; they're in "ALLDEPFILES".
200 ${srcdir}/vx-share
/dbgRpcLib.h \
201 ${srcdir}/vx-share
/ptrace.h \
202 ${srcdir}/vx-share
/reg.h \
203 ${srcdir}/vx-share
/vxTypes.h \
204 ${srcdir}/vx-share
/vxWorks.h \
205 ${srcdir}/vx-share
/wait.h \
206 ${srcdir}/vx-share
/xdr_ld.h \
207 ${srcdir}/vx-share
/xdr_ptrace.h \
208 ${srcdir}/vx-share
/xdr_rdb.h \
209 ${srcdir}/vx-share
/xdr_regs.h \
210 ${srcdir}/nindy-share
/b.out.h \
211 ${srcdir}/nindy-share
/block_io.h \
212 ${srcdir}/nindy-share
/coff.h \
213 ${srcdir}/nindy-share
/demux.h \
214 ${srcdir}/nindy-share
/env.h \
215 ${srcdir}/nindy-share
/stop.h \
216 ${srcdir}/nindy-share
/ttycntl.h
218 # Non-source files in subdirs, that should go into gdb.tar.Z.
220 ${srcdir}/nindy-share
/Makefile \
221 ${srcdir}/nindy-share
/VERSION
223 # All source files that go into linking GDB, except config-specified files.
224 SFILES
= $(SFILES_MAINDIR
) $(SFILES_SUBDIR
)
226 # All source files that lint should look at
227 LINTFILES
= $(SFILES
) $(YYFILES
) init.c
229 # Any additional files specified on these lines should also be added to
230 # the OTHERS = definition below, so they go in the tar files.
231 SFILES_STAND
= $(SFILES
) standalone.c
232 SFILES_KGDB
= $(SFILES
) stuff.c kdb-start.c
234 # Header files that are not named in config/* Makefile fragments go here.
235 HFILES
= breakpoint.h buildsym.h call-cmds.h command.h defs.h demangle.h \
236 environ.h expression.h frame.h gdbcmd.h gdbcore.h gdbtypes.h \
238 ieee-float.h inferior.h minimon.h objfiles.h partial-stab.h \
239 serial.h signals.h symfile.h symtab.h solib.h xcoffsolib.h \
240 target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h tm-sysv4.h \
241 xm-m68k.h xm-sysv4.h language.h parser-defs.h value.h xm-vax.h
243 REMOTE_EXAMPLES
= m68k-stub.c i386-stub.c rem-multi.
shar
245 POSSLIBS_MAINDIR
= regex.c regex.h alloca.c
246 POSSLIBS
= $(POSSLIBS_MAINDIR
)
248 TESTS
= testbpt.c testfun.c testrec.c testreg.c testregs.c
250 OTHERS
= Makefile.in depend alldeps.mak createtags munch configure.in \
251 ChangeLog ChangeLog-9091 ChangeLog-3.x gdb
.1 refcard.ps \
252 README TODO TAGS WHATS.NEW Projects \
253 .gdbinit COPYING
$(YYFILES
) \
254 copying.c Convex.notes copying.awk \
255 saber.suppress standalone.c stuff.c kdb-start.c \
258 # Subdirectories of gdb, which should be included in their entirety in
260 TARDIRS
= doc
# tests
262 # GDB "info" files, which should be included in their entirety
263 INFOFILES
= gdb.
info*
265 DEPFILES
= ${TDEPFILES} ${XDEPFILES}
267 SOURCES
=$(SFILES
) $(ALLDEPFILES
) $(YYFILES
)
268 TAGFILES
= $(SOURCES
) ${HFILES} ${ALLPARAM} ${POSSLIBS}
269 TAGFILES_MAINDIR
= $(SFILES_MAINDIR
) $(ALLDEPFILES_MAINDIR
) \
270 ${HFILES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
271 TARFILES
= ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
273 OBS
= main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
274 values.o eval.o valops.o valarith.o valprint.o printcmd.o \
275 symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
276 command.o utils.o expprint.o environ.o version.o gdbtypes.o \
277 copying.o
$(DEPFILES
) ${DEMANGLER}.o mem-break.o target.o \
278 inftarg.o ieee-float.o putenv.o parse.o language.o
$(YYOBJ
) \
279 buildsym.o objfiles.o minsyms.o maint.o demangle.o \
280 dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o mipsread.o \
283 RAPP_OBS
= rgdb.o rudp.o rserial.o serial.o udp.o
$(XDEPFILES
)
285 TSOBS
= core.o inflow.o
287 NTSOBS
= standalone.o
289 TSSTART
= /lib
/crt0.o
291 NTSSTART
= kdb-start.o
295 # For now, shortcut the "configure GDB for fewer languages" stuff.
296 YYFILES
= c-exp.tab.c m2-exp.tab.c
297 YYOBJ
= c-exp.tab.o m2-exp.tab.o
299 # Prevent Sun make from putting in the machine type. Setting
300 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
302 ${CC} -c
${INTERNAL_CFLAGS} $<
305 $(MAKE
) subdir_do DO
=all "DODIRS=$(SUBDIRS)"
308 $(MAKE
) subdir_do DO
=info "DODIRS=$(SUBDIRS)" "MAKEINFO=$(MAKEINFO)"
310 $(MAKE
) subdir_do DO
=install-info
"DODIRS=$(SUBDIRS)"
312 $(MAKE
) subdir_do DO
=clean-info
"DODIRS=$(SUBDIRS)"
315 nroff
-man
$(srcdir)/gdb
.1 | col
-b
> gdb.t
316 pack gdb.t
; rm -f gdb.t
320 $(INSTALL_PROGRAM
) gdb
$(bindir)/$(program_prefix
)gdb
321 $(INSTALL_DATA
) $(srcdir)/gdb
.1 $(man1dir)/$(program_prefix
)gdb
.1
323 $(MAKE
) subdir_do DO
=install "DODIRS=$(SUBDIRS)"
325 init.c
: $(srcdir)/munch
$(OBS
) $(TSOBS
)
326 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(TSOBS
) > init.c
328 gdb
: $(OBS
) $(TSOBS
) ${ADD_DEPS} ${CDEPS} init.o
329 ${CC-LD
} $(GLOBAL_CFLAGS
) $(LDFLAGS
) -o gdb \
330 init.o
$(OBS
) $(TSOBS
) $(ADD_FILES
) $(CLIBS
) $(LOADLIBES
)
332 saber_gdb
: $(SFILES
) $(DEPFILES
) copying.c version.c
333 #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
334 #load ./init.c $(SFILES)
335 #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
336 #unload ${srcdir}/nindy-share/[A-Z]*
337 #load c-exp.tab.c m2-exp.tab.c
338 #load copying.c version.c
339 #load ../libiberty/libiberty.a
340 #load ../bfd/libbfd.a
341 #load ../readline/libreadline.a
342 #load ../mmalloc/libmmalloc.a
344 #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
345 echo
"Load .c corresponding to:" $(DEPFILES
)
348 # This is useful when debugging GDB, because some Unix's don't let you run GDB
349 # on itself without copying the executable. So "make gdb1" will make
350 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
351 # Removing gdb1 before the copy is the right thing if gdb1 is open
352 # in another process.
357 # This is a remote stub which runs under unix and starts up an
358 # inferior process. This is at least useful for debugging GDB's
362 ${srcdir}/munch
${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
363 ${CC-LD
} $(LDFLAGS
) -o
$@ rapp_init.c
$(RAPP_OBS
)
365 # Support for building Makefile out of configured pieces, automatically
366 # generated dependencies, etc. alldeps.mak is a file that contains
367 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
368 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
369 # contents of the config subdirectory.
371 alldeps.mak
: ${srcdir}/config
372 rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
373 for i in
`ls -d ${srcdir}/config/*.m[ht]` ; do \
374 echo
$$i >>allconfig.tmp
; \
376 $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
377 for (i = 2; i <= NF; i++) \
378 print $$i >> "alldeps.tmp" ; \
380 $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
381 print $$2 >> "allparam.tmp" }' ; \
383 sort <alldeps.tmp | uniq | \
384 sed
-e
's/arm-convert.o/arm-convert.s/' \
385 -e
's!^Onindy.o!nindy-share/Onindy.c!' \
386 -e
's!^nindy.o!nindy-share/nindy.c!' \
387 -e
's!ttybreak.o!nindy-share/ttybreak.c!' \
388 -e
's!ttyflush.o!nindy-share/ttyflush.c!' \
389 -e
's!xdr_ld.o!vx-share/xdr_ld.c!' \
390 -e
's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
391 -e
's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
392 -e
's!xdr_regs.o!vx-share/xdr_regs.c!' \
395 echo
'# Start of "alldeps.mak" definitions' \
397 echo
'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
399 grep
-v
/ alldeps2.tmp | \
400 awk
'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
401 NR == 0 {printf $$0;} \
402 NR != 0 {printf "\\\n" $$0} \
403 END {printf "\n\n"}' >>alldeps.mak
;
404 grep
/ alldeps2.tmp | \
405 awk
'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
406 NR == 0 {printf $$0;} \
407 NR != 0 {printf "\\\n" $$0} \
408 END {printf "\n\n"}' >>alldeps.mak
;
409 sort <allparam.tmp | uniq | awk
'BEGIN {printf "ALLPARAM="} \
410 NR == 0 {printf $$0;} \
411 NR != 0 {printf "\\\n" $$0} \
412 END {printf "\n\n"}' >>alldeps.mak
;
413 sort <allconfig.tmp | uniq | awk
'BEGIN {printf "ALLCONFIG="} \
414 NR == 0 {printf $$0;} \
415 NR != 0 {printf "\\\n" $$0} \
416 END {printf "\n\n"}' >>alldeps.mak
;
417 echo
'# End of "alldeps.mak" definitions' \
419 rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
421 # The sed script makes everything which depends on {x,t}m.h depend on
422 # config.status as well, in case someone reconfigures gdb out from
423 # under an already compiled gdb.
424 depend
: $(SOURCES
) Makefile.in
425 @echo Ignore errors about non-existent system-supplied
include files
426 @echo for systems other than the one you are using.
427 @echo Also ignore parse errors in valops.c
, and any errors in
430 -$(GCC
) -MM
-nostdinc
-I
/usr
/include $(CFLAGS
) -I
$(BFD_DIR
) \
431 $(INCLUDE_CFLAGS
) `ls $(SOURCES) | grep -v '\.[hy]$$' | \
433 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
434 # for xm.h and tm.h. This allows the same "depend" file to be used
435 # by the various subdirectories.
436 if
[ "${srcdir}" = "." ] ; then \
438 -e
's; ./xm.h; xm.h;g' \
439 -e
's; ./tm.h; tm.h;g' \
440 -e
's; \./; $${srcdir}/;g' \
441 -e
's; vx-share/; $${srcdir}/vx-share/;g' \
442 -e
's; nindy-share/; $${srcdir}/nindy-share/;g' \
445 mv depend.tm2 depend.tmp
; \
448 -e
's; [xt]m.h;& config.status;g' \
449 -e
's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g' \
450 -e
's; $(READLINE_DIR)/; $(READLINE_DEP)/;g' \
451 -e
's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g' \
452 -e
's; ./xm.h; xm.h config.status;g' \
453 -e
's; ./tm.h; tm.h config.status;g' \
458 @echo
"You must configure gdb. Look at the README file for details."
461 # These are not generated by "make depend" because they only are there
463 # But these rules don't do what we want; we want to hack the foo.o: tm.h
464 # dependency to do the right thing.
465 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h
: tm-68k.h
466 tm-hp300hpux.h tm-sun2.h tm-3b1.h
: tm-68k.h
467 xm-news1000.h
: xm-news.h
468 xm-i386-sv32.h
: xm-i386.h
469 tm-i386gas.h
: tm-i386.h
470 xm-sun4os4.h
: xm-sparc.h
471 tm-sun4os4.h
: tm-sparc.h
472 xm-vaxult.h
: xm-vax.h
473 xm-vaxbsd.h
: xm-vax.h
475 kdb
: $(NTSSTART
) $(OBS
) $(NTSOBS
) ${ADD_DEPS} ${CDEPS}
477 $(srcdir)/munch
${MUNCH_DEFINE} $(OBS
) $(NTSOBS
) > init.c
478 $(CC
) $(LDFLAGS
) -c init.c
$(CLIBS
)
479 ld -o kdb
$(NTSSTART
) $(OBS
) $(NTSOBS
) init.o
$(ADD_FILES
) \
482 # Put the proper machine-specific files first.
483 # createtags will edit the .o in DEPFILES into .c
485 $(srcdir)/createtags
$(TM_FILE
) ${XM_FILE} $(DEPFILES
) ${TAGFILES}
488 # Making distributions of GDB and friends.
490 # Make a directory `proto-gdb.dir' that contains an image of the GDB
491 # directory of the distribution, built up with symlinks.
492 make-proto-gdb.
dir: force_update
493 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
494 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
496 # Make a tar file containing the GDB directory of the distribution.
497 gdb.
tar.Z
: force_update
498 $(MAKE
) $(MFLAGS
) -f Makefile.in setup-to-dist
499 $(MAKE
) $(MFLAGS
) -f Makefile.in gdb-
$(VERSION
).
tar.Z
501 # Set up the GDB directory for distribution, by building all files that
502 # are products of other files.
503 setup-to-dist
: force_update
506 $(MAKE
) $(MFLAGS
) alldeps.mak
509 $(MAKE
) $(MFLAGS
) depend
511 (cd doc
; $(MAKE
) $(MFLAGS
) gdbVN.m4
)
512 $(MAKE
) $(MFLAGS
) gdb.
info
513 $(MAKE
) $(MFLAGS
) refcard.ps
515 # Build a tar file from a proto-gdb.dir.
516 gdb-
$(VERSION
).
tar.Z
: force_update
517 rm -f gdb.
tar gdb-
$(VERSION
).
tar.Z
518 $(MAKE
) $(MFLAGS
) -f Makefile make-proto-gdb-1
519 ln
-s proto-gdb.
dir $(DIST
)
520 tar chf
- $(DIST
) | compress
>gdb-
$(VERSION
).
tar.Z
521 rm -rf
$(DIST
) proto-gdb.
dir
523 # Build a proto-gdb.dir after GDB has been set up for distribution.
524 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
525 # built in the setup-to-dist process, since it defines things like ALLCONFIG
526 # and ALLDEPFILES, that we need.
527 make-proto-gdb-1
: ${TARFILES} ${TARDIRS} gdb.
info
530 cd proto-gdb.
dir ; for i in
${TARFILES} ; do ln
-s ..
/$$i .
; done
531 cd proto-gdb.
dir ; ln
-s ..
/${INFOFILES} .
532 cd proto-gdb.
dir ; for i in
${TARDIRS}; do \
534 ln
-s ..
/..
/$$i/* .
; \
535 rm -rf SCCS CVS.adm RCS config.status
; \
536 if
test -f Makefile.in
; then
rm Makefile
; else true
; fi
; done
537 mkdir proto-gdb.
dir/config
538 cd proto-gdb.
dir/config
; \
539 for i in
$(ALLCONFIG
) ; do ln
-s ..
/..
/$$i ..
/$$i ; done
540 mkdir proto-gdb.
dir/vx-share proto-gdb.
dir/nindy-share
541 cd proto-gdb.
dir/config
; \
542 for i in
$(SFILES_SUBDIR
) $(NONSRC_SUBDIR
) $(ALLDEPFILES_SUBDIR
); \
543 do ln
-s ..
/..
/$$i ..
/$$i ; done
544 chmod og
=u
`find . -print`
547 rm -f
*.o
${ADD_FILES} *~
548 rm -f init.c version.c
549 rm -f gdb core gdb.
tar gdb.
tar.Z make.log
551 @
$(MAKE
) subdir_do DO
=clean "DODIRS=$(SUBDIRS)"
553 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
554 rm -f tm.h xm.h config.status
555 rm -f y.output
yacc.acts
yacc.tmp
556 rm -f
${TESTS} Makefile depend
557 @
$(MAKE
) subdir_do DO
=distclean "DODIRS=$(SUBDIRS)"
560 rm -f c-exp.tab.c m2-exp.tab.c TAGS
561 rm -f tm.h xm.h config.status
562 rm -f Makefile depend
563 @
$(MAKE
) subdir_do DO
=realclean "DODIRS=$(SUBDIRS)"
565 STAGESTUFF
=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
568 @for i in
$(DODIRS
); do \
569 if
[ -d .
/$$i ] ; then \
572 "against=$(against)" \
574 "AR_FLAGS=$(AR_FLAGS)" \
578 "MAKEINFO=$(MAKEINFO)" \
579 "INSTALL=$(INSTALL)" \
580 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
581 "INSTALL_DATA=$(INSTALL_DATA)" \
582 "BISON=$(BISON)" $(DO
)) ; then true
; \
587 Makefile
: $(srcdir)/Makefile.in
$(host_makefile_frag
) $(target_makefile_frag
)
588 $(SHELL
) .
/config.status
593 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
594 refcard.
dvi: $(srcdir)/doc
/refcard.
tex
595 ( cd .
/doc
; $(MAKE
) refcard.
dvi )
596 mv .
/doc
/refcard.
dvi .
598 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
599 refcard.ps
: $(srcdir)/doc
/refcard.
tex
600 ( cd .
/doc
; $(MAKE
) refcard.ps
)
601 mv .
/doc
/refcard.ps .
603 # GDB MANUAL: TeX dvi file
604 gdb.
dvi: .
/doc
/gdb-all.texi
605 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
dvi )
608 # GDB MANUAL: info file
609 gdb.
info: .
/doc
/gdb-all.texi
610 ( cd .
/doc
; $(MAKE
) M4
=$(M4
) gdb.
info )
614 (cd
$(srcdir)/doc
; $(MAKE
) M4
=$(M4
) gdb-all.texi
)
616 # Make copying.c from COPYING
617 copying.c
: ${srcdir}/COPYING
${srcdir}/copying.awk
618 awk
-f
${srcdir}/copying.awk
< ${srcdir}/COPYING
> copying.c
621 echo
'char *version = "$(VERSION)";' >version.c
623 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
624 # in srcdir, then compiled in target dir to c-exp.tab.o.
625 # Remove bogus decls for malloc/realloc/free which conflict with everything
627 c-exp.tab.o
: c-exp.tab.c
628 c-exp.tab.c
: $(srcdir)/c-exp.y
629 @echo
'Expect 4 shift/reduce conflicts.'
630 ${YACC} $(srcdir)/c-exp.y
631 -sed
-e
'/extern.*malloc/d' \
632 -e
'/extern.*realloc/d' \
633 -e
'/extern.*free/d' \
634 < y.tab.c
> c-exp.tab.c
637 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
638 # in srcdir, then compiled in target dir to m2-exp.tab.o.
639 m2-exp.tab.o
: m2-exp.tab.c
640 m2-exp.tab.c
: $(srcdir)/m2-exp.y
641 ${YACC} $(srcdir)/m2-exp.y
642 -sed
-e
'/extern.*malloc/d' \
643 -e
'/extern.*realloc/d' \
644 -e
'/extern.*free/d' \
645 < y.tab.c
> m2-exp.tab.c
649 main.o
: ${srcdir}/main.c
650 ${CC} -c
${INTERNAL_CFLAGS} -I
${READLINE_DIR} $<
652 # The symbol-file readers have dependencies on BFD header files.
653 dbxread.o
: ${srcdir}/dbxread.c
654 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dbxread.c
656 coffread.o
: ${srcdir}/coffread.c
657 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/coffread.c
659 mipsread.o
: ${srcdir}/mipsread.c
660 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/mipsread.c
662 elfread.o
: ${srcdir}/elfread.c
663 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/elfread.c
665 dwarfread.o
: ${srcdir}/dwarfread.c
666 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/dwarfread.c
668 stabsread.o
: ${srcdir}/stabsread.c
669 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/stabsread.c
671 xcoffread.o
: ${srcdir}/xcoffread.c
672 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffread.c
674 xcoffexec.o
: ${srcdir}/xcoffexec.c
675 ${CC} -c
${INTERNAL_CFLAGS} -I
$(BFD_DIR
) ${srcdir}/xcoffexec.c
677 # Drag in the files that are in another directory.
679 xdr_ld.o
: ${srcdir}/vx-share
/xdr_ld.c
680 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ld.c
682 xdr_ptrace.o
: ${srcdir}/vx-share
/xdr_ptrace.c
683 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_ptrace.c
685 xdr_rdb.o
: ${srcdir}/vx-share
/xdr_rdb.c
686 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_rdb.c
688 xdr_regs.o
: ${srcdir}/vx-share
/xdr_regs.c
689 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/vx-share
/xdr_regs.c
691 nindy.o
: ${srcdir}/nindy-share
/nindy.c
692 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/nindy.c
694 Onindy.o
: ${srcdir}/nindy-share
/Onindy.c
695 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/Onindy.c
697 ttybreak.o
: ${srcdir}/nindy-share
/ttybreak.c
698 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttybreak.c
700 ttyflush.o
: ${srcdir}/nindy-share
/ttyflush.c
701 ${CC} -c
${INTERNAL_CFLAGS} ${srcdir}/nindy-share
/ttyflush.c
704 $(LINT
) $(INCLUDE_CFLAGS
) $(LINTFLAGS
) $(LINTFILES
) \
705 `echo ${DEPFILES} | sed 's/\.o /\.c /g'
708 cxref -I. $(SFILES) >gdb.cxref
712 # Create a standalone demangler if so desired ("make demangle").
714 demangle: ${srcdir}/${DEMANGLER}.c
715 ${CC} -o $@ -DMAIN ${INTERNAL_CFLAGS} \
716 `echo
${srcdir}/${DEMANGLER}.c | sed
's,^\./,,'`
718 # GNU Make has an annoying habit of putting *all* the Makefile variables
719 # into the environment, unless you include this target as a circumvention.
720 # Rumor is that this will be fixed (and this target can be removed)
724 # This is the end of "Makefile.in". When built into "Makefile"
725 # by the configure script, two things are added below this point:
726 # alldeps.mak -- defintions of all files that are used in
727 # host- or target-dependent configurations
728 # depend -- what .o files depend on what .c and .h files,
729 # for all configurations.