gdb/Makefile.in

   1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
   2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
   3 # Free Software Foundation, Inc.
   4
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 3 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 prefix = @prefix@
  21 exec_prefix = @exec_prefix@
  22
  23 host_alias = @host_alias@
  24 target_alias = @target_alias@
  25 program_transform_name = @program_transform_name@
  26 bindir = @bindir@
  27 libdir = @libdir@
  28 tooldir = $(libdir)/$(target_alias)
  29
  30 datadir = @datadir@
  31 localedir = @localedir@
  32 mandir = @mandir@
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = @infodir@
  43 datarootdir = @datarootdir@
  44 docdir = @docdir@
  45 htmldir = @htmldir@
  46 pdfdir = @pdfdir@
  47 includedir = @includedir@
  48
  49 # This can be referenced by `LIBINTL' as computed by
  50 # ZW_GNU_GETTEXT_SISTER_DIR.
  51 top_builddir = .
  52
  53 SHELL = @SHELL@
  54 EXEEXT = @EXEEXT@
  55
  56 AWK = @AWK@
  57 LN_S = @LN_S@
  58
  59 INSTALL = @INSTALL@
  60 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  61 INSTALL_DATA = @INSTALL_DATA@
  62
  63 DESTDIR =
  64
  65 AR = @AR@
  66 AR_FLAGS = qv
  67 RANLIB = @RANLIB@
  68 DLLTOOL = @DLLTOOL@
  69 WINDRES = @WINDRES@
  70 MIG = @MIG@
  71
  72 XGETTEXT = @XGETTEXT@
  73 GMSGFMT = @GMSGFMT@
  74 MSGMERGE = msgmerge
  75
  76 PACKAGE = @PACKAGE@
  77 CATALOGS = @CATALOGS@
  78
  79 # If you are compiling with GCC, make sure that either 1) You have the
  80 # fixed include files where GCC can reach them, or 2) You use the
  81 # -traditional flag.  Otherwise the ioctl calls in inflow.c
  82 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  83 # distribution will fix your include files up.
  84 CC=@CC@
  85
  86 # Dependency tracking information.
  87 DEPMODE = @CCDEPMODE@
  88 DEPDIR = @DEPDIR@
  89 depcomp = $(SHELL) $(srcdir)/../depcomp
  90
  91 # Note that these are overridden by GNU make-specific code below if
  92 # GNU make is used.  The overrides implement dependency tracking.
  93 COMPILE.pre = $(CC)
  94 COMPILE.post = -c -o $@
  95 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
  96 POSTCOMPILE = @true
  97
  98 # Directory containing source files.
  99 srcdir = @srcdir@
 100 VPATH = @srcdir@
 101
 102 YACC=@YACC@
 103
 104 # This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
 105 # not defined, but ada-lex.c is present, compilation will continue,
 106 # possibly with a warning.
 107 FLEX = flex
 108
 109 YLWRAP = $(srcdir)/../ylwrap
 110
 111 # where to find makeinfo, preferably one designed for texinfo-2
 112 MAKEINFO=makeinfo
 113
 114 MAKEHTML = $(MAKEINFO) --html
 115 MAKEHTMLFLAGS =
 116
 117 # Set this up with gcc if you have gnu ld and the loader will print out
 118 # line numbers for undefined references.
 119 #CC_LD=gcc -static
 120 CC_LD=$(CC)
 121
 122 # Where is our "include" directory?  Typically $(srcdir)/../include.
 123 # This is essentially the header file directory for the library
 124 # routines in libiberty.
 125 INCLUDE_DIR =  $(srcdir)/../include
 126 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
 127
 128 # Where is the "-liberty" library?  Typically in ../libiberty.
 129 LIBIBERTY = ../libiberty/libiberty.a
 130
 131 # Where is the BFD library?  Typically in ../bfd.
 132 BFD_DIR = ../bfd
 133 BFD = $(BFD_DIR)/libbfd.a
 134 BFD_SRC = $(srcdir)/$(BFD_DIR)
 135 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
 136
 137 # Where is the decnumber library?  Typically in ../libdecnumber.
 138 LIBDECNUMBER_DIR = ../libdecnumber
 139 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
 140 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
 141 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
 142
 143 # Where is the READLINE library?  Typically in ../readline.
 144 READLINE_DIR = ../readline
 145 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
 146 READLINE = @READLINE@
 147 READLINE_DEPS = @READLINE_DEPS@
 148 READLINE_CFLAGS = @READLINE_CFLAGS@
 149
 150 # Where is expat?  This will be empty if expat was not available.
 151 LIBEXPAT = @LIBEXPAT@
 152
 153 WARN_CFLAGS = @WARN_CFLAGS@
 154 WERROR_CFLAGS = @WERROR_CFLAGS@
 155 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
 156 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
 157
 158 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
 159
 160 # Where is the INTL library?  Typically in ../intl.
 161 INTL = @LIBINTL@
 162 INTL_DEPS = @LIBINTL_DEP@
 163 INTL_CFLAGS = @INCINTL@
 164
 165 # Did the user give us a --with-sysroot option?
 166 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 167 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 168
 169 # Did the user give us a --with-gdb-datadir option?
 170 GDB_DATADIR = @GDB_DATADIR@
 171
 172 # Helper code from gnulib.
 173 LIBGNU = gnulib/libgnu.a
 174 INCGNU = -I$(srcdir)/gnulib -Ignulib
 175
 176 # Generated headers in the gnulib directory.  These must be listed
 177 # so that they are generated before other files are compiled.
 178 GNULIB_H = gnulib/string.h @GNULIB_STDINT_H@
 179
 180 #
 181 # CLI sub directory definitons
 182 #
 183 SUBDIR_CLI_OBS = \
 184         cli-dump.o \
 185         cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
 186         cli-logging.o \
 187         cli-interp.o
 188 SUBDIR_CLI_SRCS = \
 189         cli/cli-dump.c \
 190         cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
 191         cli/cli-logging.c \
 192         cli/cli-interp.c
 193 SUBDIR_CLI_DEPS =
 194 SUBDIR_CLI_LDFLAGS=
 195 SUBDIR_CLI_CFLAGS=
 196
 197 #
 198 # MI sub directory definitons
 199 #
 200 SUBDIR_MI_OBS = \
 201         mi-out.o mi-console.o \
 202         mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
 203         mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
 204         mi-interp.o \
 205         mi-main.o mi-parse.o mi-getopt.o mi-common.o
 206 SUBDIR_MI_SRCS = \
 207         mi/mi-out.c mi/mi-console.c \
 208         mi/mi-cmds.c mi/mi-cmd-env.c \
 209         mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
 210         mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
 211         mi/mi-cmd-target.c mi/mi-interp.c \
 212         mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c mi/mi-common.c
 213 SUBDIR_MI_DEPS =
 214 SUBDIR_MI_LDFLAGS=
 215 SUBDIR_MI_CFLAGS= \
 216         -DMI_OUT=1
 217
 218 #
 219 # TUI sub directory definitions
 220 #
 221
 222 # Name of the TUI program
 223 TUI=gdbtui
 224
 225 SUBDIR_TUI_OBS = \
 226         tui-command.o \
 227         tui-data.o \
 228         tui-disasm.o \
 229         tui-file.o tui.o \
 230         tui-hooks.o \
 231         tui-interp.o \
 232         tui-io.o \
 233         tui-layout.o \
 234         tui-out.o \
 235         tui-regs.o \
 236         tui-source.o \
 237         tui-stack.o \
 238         tui-win.o \
 239         tui-windata.o \
 240         tui-wingeneral.o \
 241         tui-winsource.o
 242 SUBDIR_TUI_SRCS = \
 243         tui/tui-command.c \
 244         tui/tui-data.c \
 245         tui/tui-disasm.c \
 246         tui/tui-file.c \
 247         tui/tui-hooks.c \
 248         tui/tui-interp.c \
 249         tui/tui-io.c \
 250         tui/tui-layout.c \
 251         tui/tui-out.c \
 252         tui/tui-regs.c \
 253         tui/tui-source.c \
 254         tui/tui-stack.c \
 255         tui/tui-win.c \
 256         tui/tui-windata.c \
 257         tui/tui-wingeneral.c \
 258         tui/tui-winsource.c \
 259         tui/tui.c
 260 SUBDIR_TUI_DEPS =
 261 SUBDIR_TUI_LDFLAGS=
 262 SUBDIR_TUI_CFLAGS= \
 263         -DTUI=1
 264
 265 #
 266 # python sub directory definitons
 267 #
 268 SUBDIR_PYTHON_OBS = \
 269         python.o \
 270         py-block.o \
 271         py-cmd.o \
 272         py-frame.o \
 273         py-function.o \
 274         py-lazy-string.o \
 275         py-objfile.o \
 276         py-prettyprint.o \
 277         py-symbol.o \
 278         py-symtab.o \
 279         py-type.o \
 280         py-utils.o \
 281         py-value.o
 282 SUBDIR_PYTHON_SRCS = \
 283         python/python.c \
 284         python/py-block.c \
 285         python/py-cmd.c \
 286         python/py-frame.c \
 287         python/py-function.c \
 288         python/py-lazy-string.c \
 289         python/py-objfile.c \
 290         python/py-prettyprint.c \
 291         python/py-symbol.c \
 292         python/py-symtab.c \
 293         python/py-type.c \
 294         python/py-utils.c \
 295         python/py-value.c
 296 SUBDIR_PYTHON_DEPS =
 297 SUBDIR_PYTHON_LDFLAGS=
 298 SUBDIR_PYTHON_CFLAGS=
 299
 300
 301 # Opcodes currently live in one of two places.  Either they are in the
 302 # opcode library, typically ../opcodes, or they are in a header file
 303 # in INCLUDE_DIR.
 304 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 305 # disassemblers?
 306 OPCODES_DIR = ../opcodes
 307 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
 308 OPCODES = $(OPCODES_DIR)/libopcodes.a
 309 # Where are the other opcode tables which only have header file
 310 # versions?
 311 OP_INCLUDE = $(INCLUDE_DIR)/opcode
 312 OPCODES_CFLAGS = -I$(OP_INCLUDE)
 313
 314 # The simulator is usually nonexistent; targets that include one
 315 # should set this to list all the .o or .a files to be linked in.
 316 SIM = @SIM@
 317
 318 WIN32LIBS = @WIN32LIBS@
 319
 320 # Tcl et al cflags and libraries
 321 TCL = @TCL_LIBRARY@
 322 TCL_CFLAGS = @TCL_INCLUDE@
 323 GDBTKLIBS = @GDBTKLIBS@
 324 # Extra flags that the GDBTK files need:
 325 GDBTK_CFLAGS = @GDBTK_CFLAGS@
 326
 327 TK = @TK_LIBRARY@
 328 TK_CFLAGS = @TK_INCLUDE@
 329
 330 X11_CFLAGS = @TK_XINCLUDES@
 331 X11_LDFLAGS =
 332 X11_LIBS =
 333
 334 WIN32LDAPP = @WIN32LDAPP@
 335
 336 LIBGUI = @LIBGUI@
 337 GUI_CFLAGS_X = @GUI_CFLAGS_X@
 338 IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
 339
 340 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
 341
 342 # The version of gdbtk we're building. This should be kept
 343 # in sync with GDBTK_VERSION and friends in gdbtk.h.
 344 GDBTK_VERSION = 1.0
 345 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
 346
 347 # Gdbtk requires an absolute path to the source directory or
 348 # the testsuite won't run properly.
 349 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
 350
 351 SUBDIR_GDBTK_OBS = \
 352         gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
 353         gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
 354 SUBDIR_GDBTK_SRCS = \
 355         gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
 356         gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
 357         gdbtk/generic/gdbtk-interp.c \
 358         gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
 359         gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
 360         gdbtk/generic/gdbtk-main.c
 361 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
 362 SUBDIR_GDBTK_LDFLAGS=
 363 SUBDIR_GDBTK_CFLAGS= -DGDBTK
 364
 365 CONFIG_OBS= @CONFIG_OBS@
 366 CONFIG_SRCS= @CONFIG_SRCS@
 367 CONFIG_DEPS= @CONFIG_DEPS@
 368 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
 369 ENABLE_CFLAGS= @ENABLE_CFLAGS@
 370 CONFIG_ALL= @CONFIG_ALL@
 371 CONFIG_CLEAN= @CONFIG_CLEAN@
 372 CONFIG_INSTALL = @CONFIG_INSTALL@
 373 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
 374
 375 # -I. for config files.
 376 # -I$(srcdir) for gdb internal headers.
 377 # -I$(srcdir)/config for more generic config files.
 378
 379 # It is also possible that you will need to add -I/usr/include/sys if
 380 # your system doesn't have fcntl.h in /usr/include (which is where it
 381 # should be according to Posix).
 382 DEFS = @DEFS@
 383 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
 384         -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
 385
 386 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
 387 GLOBAL_CFLAGS = $(MH_CFLAGS)
 388
 389 PROFILE_CFLAGS = @PROFILE_CFLAGS@
 390
 391 # CFLAGS is specifically reserved for setting from the command line
 392 # when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
 393 CFLAGS = @CFLAGS@
 394
 395 # Set by configure, for e.g. expat.
 396 INTERNAL_CPPFLAGS = @CPPFLAGS@
 397
 398 # Need to pass this to testsuite for "make check".  Probably should be
 399 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
 400 # so "make check" has the same result no matter where it is run.
 401 CXXFLAGS = -g -O
 402
 403 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 404 INTERNAL_CFLAGS_BASE = \
 405         $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 406         $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 407         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
 408         $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
 409 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 410 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 411
 412 # LDFLAGS is specifically reserved for setting from the command line
 413 # when running make.
 414 LDFLAGS = @LDFLAGS@
 415
 416 # Profiling options need to go here to work.
 417 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
 418 # and have it work; that's why CFLAGS is here.
 419 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
 420 INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
 421
 422 # If your system is missing alloca(), or, more likely, it's there but
 423 # it doesn't work, then refer to libiberty.
 424
 425 # Libraries and corresponding dependencies for compiling gdb.
 426 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 427 # LIBIBERTY appears twice on purpose.
 428 # If you have the Cygnus libraries installed,
 429 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 430 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
 431         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 432         -lintl -liberty $(LIBGNU)
 433 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 434         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 435         $(LIBEXPAT) \
 436         $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
 437 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
 438         $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 439
 440 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 441 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 442
 443 DIST=gdb
 444
 445 LINT=/usr/5bin/lint
 446 LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 447         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
 448         $(INTL_CFLAGS)
 449
 450 RUNTEST = runtest
 451 RUNTESTFLAGS=
 452
 453 # XML files to build in to GDB.
 454 XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
 455         $(srcdir)/features/library-list.dtd $(srcdir)/features/osdata.dtd \
 456         $(srcdir)/features/threads.dtd
 457
 458 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
 459 # interface to the serial port.  Hopefully if get ported to OS/2, VMS,
 460 # etc., then there will be (as part of the C library or perhaps as
 461 # part of libiberty) a POSIX interface.  But at least for now the
 462 # host-dependent makefile fragment might need to use something else
 463 # besides ser-unix.o
 464 SER_HARDWIRE = @SER_HARDWIRE@
 465
 466 # The `remote' debugging target is supported for most architectures,
 467 # but not all (e.g. 960)
 468 REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
 469
 470 # This is remote-sim.o if a simulator is to be linked in.
 471 SIM_OBS = @SIM_OBS@
 472
 473 # Target-dependent object files.
 474 TARGET_OBS = @TARGET_OBS@
 475
 476 # All target-dependent objects files that require 64-bit CORE_ADDR
 477 # (used with --enable-targets=all --enable-64-bit-bfd).
 478 ALL_64_TARGET_OBS = \
 479         alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
 480         alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
 481         amd64fbsd-tdep.o amd64-darwin-tdep.o amd64-dicos-tdep.o \
 482         amd64-linux-tdep.o amd64nbsd-tdep.o \
 483         amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o amd64-windows-tdep.o \
 484         ia64-linux-tdep.o ia64-tdep.o \
 485         mips64obsd-tdep.o \
 486         sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
 487         sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
 488
 489 # All other target-dependent objects files (used with --enable-targets=all).
 490 ALL_TARGET_OBS = \
 491         armbsd-tdep.o arm-linux-tdep.o arm-symbian-tdep.o \
 492         armnbsd-tdep.o armobsd-tdep.o \
 493         arm-tdep.o arm-wince-tdep.o \
 494         avr-tdep.o \
 495         cris-tdep.o \
 496         dicos-tdep.o \
 497         frv-linux-tdep.o frv-tdep.o \
 498         h8300-tdep.o \
 499         hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
 500         hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
 501         i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
 502         i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
 503         i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
 504         i386-dicos-tdep.o i386-darwin-tdep.o \
 505         iq2000-tdep.o \
 506         linux-tdep.o \
 507         lm32-tdep.o \
 508         m32c-tdep.o \
 509         m32r-linux-tdep.o m32r-tdep.o \
 510         m68hc11-tdep.o \
 511         m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
 512         m88k-tdep.o \
 513         mep-tdep.o \
 514         microblaze-tdep.o microblaze-linux-tdep.o \
 515         mips-irix-tdep.o mips-linux-tdep.o \
 516         mipsnbsd-tdep.o mips-tdep.o \
 517         mn10300-linux-tdep.o mn10300-tdep.o \
 518         moxie-tdep.o \
 519         mt-tdep.o \
 520         nto-tdep.o \
 521         ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
 522         rs6000-aix-tdep.o rs6000-tdep.o \
 523         s390-tdep.o \
 524         score-tdep.o \
 525         sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
 526         sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
 527         sparc-sol2-tdep.o sparc-tdep.o \
 528         spu-tdep.o spu-multiarch.o solib-spu.o \
 529         v850-tdep.o \
 530         vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
 531         xstormy16-tdep.o \
 532         xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
 533         glibc-tdep.o \
 534         bsd-uthread.o \
 535         nbsd-tdep.o obsd-tdep.o \
 536         sol2-tdep.o \
 537         solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
 538         solib-som.o solib-pa64.o solib-darwin.o \
 539         dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
 540         remote-m32r-sdi.o \
 541         xcoffread.o \
 542         symfile-mem.o \
 543         corelow.o \
 544         windows-tdep.o \
 545         linux-record.o
 546
 547 # Host-dependent makefile fragment comes in here.
 548 @host_makefile_frag@
 549 # End of host-dependent makefile fragment
 550
 551 FLAGS_TO_PASS = \
 552         "prefix=$(prefix)" \
 553         "exec_prefix=$(exec_prefix)" \
 554         "infodir=$(infodir)" \
 555         "datarootdir=$(datarootdir)" \
 556         "docdir=$(docdir)" \
 557         "htmldir=$(htmldir)" \
 558         "pdfdir=$(pdfdir)" \
 559         "libdir=$(libdir)" \
 560         "mandir=$(mandir)" \
 561         "datadir=$(datadir)" \
 562         "includedir=$(includedir)" \
 563         "against=$(against)" \
 564         "DESTDIR=$(DESTDIR)" \
 565         "AR=$(AR)" \
 566         "AR_FLAGS=$(AR_FLAGS)" \
 567         "CC=$(CC)" \
 568         "CFLAGS=$(CFLAGS)" \
 569         "CXX=$(CXX)" \
 570         "CXXFLAGS=$(CXXFLAGS)" \
 571         "DLLTOOL=$(DLLTOOL)" \
 572         "LDFLAGS=$(LDFLAGS)" \
 573         "RANLIB=$(RANLIB)" \
 574         "MAKEINFO=$(MAKEINFO)" \
 575         "MAKEHTML=$(MAKEHTML)" \
 576         "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
 577         "INSTALL=$(INSTALL)" \
 578         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 579         "INSTALL_DATA=$(INSTALL_DATA)" \
 580         "RUNTEST=$(RUNTEST)" \
 581         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 582
 583 # Flags that we pass when building the testsuite.
 584
 585 # empty for native, $(target_alias)/ for cross
 586 target_subdir = @target_subdir@
 587
 588 CC_FOR_TARGET = ` \
 589   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 590     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 591       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 592     else \
 593       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 594     fi; \
 595   else \
 596     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 597       echo $(CC); \
 598     else \
 599       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 600     fi; \
 601   fi`
 602
 603 CXX = gcc
 604 CXX_FOR_TARGET = ` \
 605   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 606     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 607       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 608     else \
 609       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 610     fi; \
 611   else \
 612     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 613       echo $(CXX); \
 614     else \
 615       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 616     fi; \
 617   fi`
 618
 619 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 620 # duplicating the lengthy definition.
 621 TARGET_FLAGS_TO_PASS = \
 622         "prefix=$(prefix)" \
 623         "exec_prefix=$(exec_prefix)" \
 624         "against=$(against)" \
 625         'CC=$$(CC_FOR_TARGET)' \
 626         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 627         "CFLAGS=$(CFLAGS)" \
 628         'CXX=$$(CXX_FOR_TARGET)' \
 629         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 630         "CXXFLAGS=$(CXXFLAGS)" \
 631         "INSTALL=$(INSTALL)" \
 632         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 633         "INSTALL_DATA=$(INSTALL_DATA)" \
 634         "MAKEINFO=$(MAKEINFO)" \
 635         "MAKEHTML=$(MAKEHTML)" \
 636         "RUNTEST=$(RUNTEST)" \
 637         "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
 638         "FORCE_PARALLEL=$(FORCE_PARALLEL)"
 639
 640 # All source files that go into linking GDB.
 641 # Links made at configuration time should not be specified here, since
 642 # SFILES is used in building the distribution archive.
 643
 644 SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
 645         addrmap.c \
 646         auxv.c ax-general.c ax-gdb.c \
 647         bcache.c \
 648         bfd-target.c \
 649         block.c blockframe.c breakpoint.c buildsym.c \
 650         c-exp.y c-lang.c c-typeprint.c c-valprint.c \
 651         charset.c cli-out.c coffread.c coff-pe-read.c \
 652         complaints.c completer.c corefile.c \
 653         cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
 654         cp-name-parser.y \
 655         dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
 656         dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
 657         elfread.c environ.c eval.c event-loop.c event-top.c \
 658         exceptions.c expprint.c \
 659         f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
 660         frame.c frame-base.c frame-unwind.c \
 661         gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
 662         inf-loop.c \
 663         infcall.c \
 664         infcmd.c inflow.c infrun.c \
 665         inline-frame.c \
 666         interps.c \
 667         jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
 668         language.c linespec.c \
 669         m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
 670         macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
 671         mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
 672         objc-exp.y objc-lang.c \
 673         objfiles.c osabi.c observer.c osdata.c \
 674         p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 675         progspace.c \
 676         prologue-value.c \
 677         regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
 678         scm-exp.c scm-lang.c scm-valprint.c \
 679         sentinel-frame.c \
 680         serial.c ser-base.c ser-unix.c \
 681         solib.c solib-null.c source.c \
 682         stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
 683         symtab.c \
 684         target.c target-descriptions.c target-memory.c \
 685         thread.c top.c tracepoint.c \
 686         trad-frame.c \
 687         tramp-frame.c \
 688         typeprint.c \
 689         ui-out.c utils.c ui-file.h ui-file.c \
 690         user-regs.c \
 691         valarith.c valops.c valprint.c value.c varobj.c vec.c \
 692         wrapper.c \
 693         xml-tdesc.c xml-support.c \
 694         inferior.c gdb_usleep.c \
 695         record.c gcore.c \
 696         jit.c \
 697         xml-syscall.c \
 698
 699 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
 700
 701 # Header files that need to have srcdir added.  Note that in the cases
 702 # where we use a macro like $(gdbcmd_h), things are carefully arranged
 703 # so that each .h file is listed exactly once (M-x tags-search works
 704 # wrong if TAGS has files twice).  Because this is tricky to get
 705 # right, it is probably easiest just to list .h files here directly.
 706
 707 HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \
 708 osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
 709 osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
 710 osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
 711 osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \
 712 osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \
 713 osf-share/cma_stack_int.h osf-share/cma_init.h \
 714 osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \
 715 osf-share/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
 716 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h \
 717 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
 718 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
 719 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
 720 c-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
 721 cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \
 722 cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
 723 gnulib/string.in.h gnulib/str-two-way.h gnulib/extra/link-warning.h \
 724 gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
 725 gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \
 726 gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \
 727 gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
 728 gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
 729 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
 730 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
 731 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
 732 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
 733 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
 734 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
 735 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
 736 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
 737 solib-target.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
 738 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
 739 target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
 740 tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
 741 tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
 742 tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
 743 tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
 744 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
 745 call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
 746 mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
 747 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
 748 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
 749 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
 750 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
 751 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
 752 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
 753 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
 754 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
 755 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
 756 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
 757 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
 758 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
 759 regformats/regdef.h config/alpha/nm-osf3.h  config/i386/nm-i386gnu.h \
 760 config/i386/nm-fbsd.h config/i386/nm-i386sol2.h config/i386/nm-linux.h \
 761 config/nm-nto.h config/sparc/nm-sol2.h config/nm-linux.h \
 762 config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
 763 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
 764 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
 765 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
 766 gdb_usleep.h jit.h xml-syscall.h ada-operator.inc microblaze-tdep.h
 767
 768 # Header files that already have srcdir in them, or which are in objdir.
 769
 770 HFILES_WITH_SRCDIR = ../bfd/bfd.h
 771
 772
 773 # GDB "info" files, which should be included in their entirety
 774 INFOFILES = gdb.info*
 775
 776 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
 777
 778 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
 779 # default their values the way we do for SER_HARDWIRE; in the future
 780 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
 781 # variables analogous to SER_HARDWIRE which get defaulted in this
 782 # Makefile.in
 783
 784 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
 785            $(REMOTE_OBS) $(SIM_OBS)
 786
 787 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
 788 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
 789 # and it's more useful to see it in the .y file.
 790 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
 791         $(CONFIG_SRCS)
 792 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
 793
 794 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 795         version.o \
 796         annotate.o \
 797         addrmap.o \
 798         auxv.o \
 799         bfd-target.o \
 800         blockframe.o breakpoint.o findvar.o regcache.o \
 801         charset.o disasm.o dummy-frame.o dfp.o \
 802         source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
 803         block.o symtab.o symfile.o symmisc.o linespec.o dictionary.o \
 804         infcall.o \
 805         infcmd.o infrun.o \
 806         expprint.o environ.o stack.o thread.o \
 807         exceptions.o \
 808         inf-child.o \
 809         interps.o \
 810         main.o \
 811         macrotab.o macrocmd.o macroexp.o macroscope.o \
 812         event-loop.o event-top.o inf-loop.o completer.o \
 813         gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
 814         memattr.o mem-break.o target.o parse.o language.o buildsym.o \
 815         findcmd.o \
 816         std-regs.o \
 817         signals.o \
 818         exec.o reverse.o \
 819         bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
 820         dbxread.o coffread.o coff-pe-read.o \
 821         dwarf2read.o mipsread.o stabsread.o corefile.o \
 822         dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
 823         ada-lang.o c-lang.o f-lang.o objc-lang.o \
 824         ada-tasks.o \
 825         ui-out.o cli-out.o \
 826         varobj.o vec.o wrapper.o \
 827         jv-lang.o jv-valprint.o jv-typeprint.o \
 828         m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
 829         scm-exp.o scm-lang.o scm-valprint.o \
 830         sentinel-frame.o \
 831         complaints.o typeprint.o \
 832         ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
 833         ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
 834         serial.o mdebugread.o top.o utils.o \
 835         ui-file.o \
 836         user-regs.o \
 837         frame.o frame-unwind.o doublest.o \
 838         frame-base.o \
 839         inline-frame.o \
 840         gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
 841         cp-namespace.o \
 842         reggroups.o regset.o \
 843         trad-frame.o \
 844         tramp-frame.o \
 845         solib.o solib-null.o \
 846         prologue-value.o memory-map.o xml-support.o xml-syscall.o \
 847         target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
 848         inferior.o osdata.o gdb_usleep.o record.o gcore.o \
 849         jit.o progspace.o
 850
 851 # Definitions for the syscall's XML files and dir
 852 XML_SYSCALLS_DIR = syscalls/
 853 XML_SYSCALLS_FILES = gdb-syscalls.dtd \
 854                      ppc-linux.xml ppc64-linux.xml \
 855                      i386-linux.xml amd64-linux.xml \
 856                      sparc-linux.xml sparc64-linux.xml
 857
 858 TSOBS = inflow.o
 859
 860 SUBDIRS = @subdirs@
 861 CLEANDIRS = $(SUBDIRS) gnulib
 862
 863 # For now, shortcut the "configure GDB for fewer languages" stuff.
 864 YYFILES = c-exp.c \
 865         cp-name-parser.c \
 866         objc-exp.c \
 867         ada-lex.c \
 868         ada-exp.c \
 869         jv-exp.c \
 870         f-exp.c m2-exp.c p-exp.c
 871 YYOBJ = c-exp.o \
 872         cp-name-parser.o \
 873         objc-exp.o \
 874         ada-exp.o \
 875         jv-exp.o \
 876         f-exp.o m2-exp.o p-exp.o
 877
 878 # Things which need to be built when making a distribution.
 879
 880 DISTSTUFF = $(YYFILES)
 881
 882
 883 # All generated files which can be included by another file.
 884 generated_files = config.h observer.h observer.inc ada-lex.c \
 885         $(GNULIB_H) $(NAT_GENERATED_FILES)
 886
 887 .c.o:
 888         $(COMPILE) $<
 889         $(POSTCOMPILE)
 890
 891 all: gdb$(EXEEXT) $(CONFIG_ALL) xml-syscall-copy
 892         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 893 .PHONY: all-tui
 894 all-tui: $(TUI)$(EXEEXT)
 895
 896 # This is needed for running GDB from the build directory
 897 .PHONY: xml-syscall-copy
 898 xml-syscall-copy:
 899         if [ "`cd $(srcdir) && pwd`" != "`pwd`" ] ; then \
 900           mkdir -p ./$(XML_SYSCALLS_DIR) ; \
 901           list='$(XML_SYSCALLS_FILES)' ; \
 902           for file in $$list ; do \
 903             f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
 904             if test -f $$f ; then \
 905               $(INSTALL_DATA) $$f \
 906                   ./$(XML_SYSCALLS_DIR) ; \
 907             fi ; \
 908           done ; \
 909         fi ;
 910
 911 # This target is responsible for properly installing the syscalls'
 912 # XML files in the system.
 913 .PHONY: xml-syscall-install
 914 xml-syscall-install:
 915         $(SHELL) $(srcdir)/../mkinstalldirs \
 916                 $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \
 917         list='$(XML_SYSCALLS_FILES)' ; \
 918         for file in $$list ; do \
 919           f=$(srcdir)/$(XML_SYSCALLS_DIR)/$$file ; \
 920           if test -f $$f ; then \
 921             $(INSTALL_DATA) $$f \
 922                 $(DESTDIR)$(GDB_DATADIR)/$(XML_SYSCALLS_DIR) ; \
 923           fi ; \
 924         done ;
 925
 926 installcheck:
 927
 928 # The check target can not use subdir_do, because subdir_do does not
 929 # use TARGET_FLAGS_TO_PASS.
 930 check: force
 931         @if [ -f testsuite/Makefile ]; then \
 932           rootme=`pwd`; export rootme; \
 933           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 934           cd testsuite; \
 935           $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
 936         else true; fi
 937
 938 # The idea is to parallelize testing of multilibs, for example:
 939 #   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
 940 # will run 3 concurrent sessions of check, eventually testing all 10
 941 # combinations.  GNU make is required for the % pattern to work, as is
 942 # a shell that expands alternations within braces.  If GNU make is not
 943 # used, this rule will harmlessly fail to match.  Used FORCE_PARALLEL to
 944 # prevent serialized checking due to the passed RUNTESTFLAGS.
 945 # FIXME: use config.status --config not --version, when available.
 946 check//%: force
 947         @if [ -f testsuite/config.status ]; then \
 948           rootme=`pwd`; export rootme; \
 949           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 950           target=`echo "$@" | sed 's,//.*,,'`; \
 951           variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
 952           vardots=`echo "$$variant" | sed 's,/,.,g'`; \
 953           testdir=testsuite.$$vardots; \
 954           if [ ! -f $$testdir/Makefile ] && [ -f testsuite/config.status ]; then \
 955             configargs=`cd testsuite && ./config.status --version | \
 956               sed -n -e 's,"$$,,' -e 's,^ *with options ",,p'`; \
 957             $(SHELL) $(srcdir)/../mkinstalldirs $$testdir && \
 958             (cd $$testdir && \
 959              eval $(SHELL) "\"\$$rootsrc/testsuite/configure\" $$configargs" \
 960                            "\"--srcdir=\$$rootsrc/testsuite\"" \
 961              ); \
 962           else :; fi && cd $$testdir && \
 963           $(MAKE) $(TARGET_FLAGS_TO_PASS) \
 964             RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
 965             FORCE_PARALLEL=$(if $(FORCE_PARALLEL),1,$(if $(RUNTESTFLAGS),,1)) \
 966             "$$target"; \
 967         else true; fi
 968
 969 info install-info clean-info dvi pdf install-pdf html install-html: force
 970         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
 971
 972 gdb.z:gdb.1
 973         nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
 974         pack gdb.t ; rm -f gdb.t
 975         mv gdb.t.z gdb.z
 976
 977 # Traditionally "install" depends on "all".  But it may be useful
 978 # not to; for example, if the user has made some trivial change to a
 979 # source file and doesn't care about rebuilding or just wants to save the
 980 # time it takes for make to check that all is up to date.
 981 # install-only is intended to address that need.
 982 install: all install-only
 983
 984 # The "install-only" target also installs the syscalls' XML files in
 985 # the system.
 986 install-only: $(CONFIG_INSTALL) xml-syscall-install
 987         transformed_name=`t='$(program_transform_name)'; \
 988                           echo gdb | sed -e "$$t"` ; \
 989                 if test "x$$transformed_name" = x; then \
 990                   transformed_name=gdb ; \
 991                 else \
 992                   true ; \
 993                 fi ; \
 994                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
 995                 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
 996                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
 997                 $(SHELL) $(srcdir)/../mkinstalldirs \
 998                         $(DESTDIR)$(man1dir) ; \
 999                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
1000                         $(DESTDIR)$(man1dir)/$$transformed_name.1
1001         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1002 .PHONY: install-tui
1003 install-tui:
1004         transformed_name=`t='$(program_transform_name)'; \
1005                           echo $(TUI) | sed -e "$$t"` ; \
1006                 if test "x$$transformed_name" = x; then \
1007                   transformed_name=$(TUI) ; \
1008                 else \
1009                   true ; \
1010                 fi ; \
1011                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
1012                 $(INSTALL_PROGRAM) $(TUI)$(EXEEXT) \
1013                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1014                 $(SHELL) $(srcdir)/../mkinstalldirs \
1015                         $(DESTDIR)$(man1dir) ; \
1016                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
1017                         $(DESTDIR)$(man1dir)/$$transformed_name.1
1018
1019
1020 uninstall: force $(CONFIG_UNINSTALL)
1021         transformed_name=`t='$(program_transform_name)'; \
1022                           echo gdb | sed -e $$t` ; \
1023                 if test "x$$transformed_name" = x; then \
1024                   transformed_name=gdb ; \
1025                 else \
1026                   true ; \
1027                 fi ; \
1028                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1029                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1030         @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
1031 .PHONY: uninstall-tui
1032 uninstall-tui:
1033         transformed_name=`t='$(program_transform_name)'; \
1034                           echo $(TUI) | sed -e $$t` ; \
1035                 if test "x$$transformed_name" = x; then \
1036                   transformed_name=$(TUI) ; \
1037                 else \
1038                   true ; \
1039                 fi ; \
1040                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
1041                       $(DESTDIR)$(man1dir)/$$transformed_name.1
1042
1043 # The C++ name parser can be built standalone for testing.
1044 test-cp-name-parser.o: cp-name-parser.c
1045         $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
1046         $(POSTCOMPILE)
1047
1048 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
1049         $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
1050                 test-cp-name-parser.o $(LIBIBERTY)
1051
1052 # We do this by grepping through sources.  If that turns out to be too slow,
1053 # maybe we could just require every .o file to have an initialization routine
1054 # of a given name (top.o -> _initialize_top, etc.).
1055 #
1056 # Formatting conventions:  The name of the _initialize_* routines must start
1057 # in column zero, and must not be inside #if.
1058 #
1059 # Note that the set of files with init functions might change, or the names
1060 # of the functions might change, so this files needs to depend on all the
1061 # object files that will be linked into gdb.
1062
1063 # FIXME: There is a problem with this approach - init.c may force
1064 # unnecessary files to be linked in.
1065
1066 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
1067 # the first call is to _initialize_gdbtypes (implemented by explicitly
1068 # putting that function's name first in the init.l-tmp file).  This is
1069 # a hack to ensure that all the architecture dependant global
1070 # builtin_type_* variables are initialized before anything else
1071 # (per-architecture code is called in the same order that it is
1072 # registered).  The ``correct fix'' is to have all the builtin types
1073 # made part of the architecture and initialize them on-demand (using
1074 # gdbarch_data) just like everything else.  The catch is that other
1075 # modules still take the address of these builtin types forcing them
1076 # to be variables, sigh!
1077
1078 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1079 # anchored on the first column and excludes the ``/'' character so
1080 # that it doesn't add the $(srcdir) prefix to any file that already
1081 # has an absolute path.  It turns out that $(DEC)'s True64 make
1082 # automatically adds the $(srcdir) prefixes when it encounters files
1083 # in sub-directories such as cli/ and mi/.
1084
1085 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1086 # duplicates.  Files in the gdb/ directory can end up appearing in
1087 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1088
1089 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
1090 init.c: $(INIT_FILES)
1091         @echo Making init.c
1092         @rm -f init.c-tmp init.l-tmp
1093         @touch init.c-tmp
1094         @echo gdbtypes > init.l-tmp
1095         @-LANG=C ; export LANG ; \
1096         LC_ALL=C ; export LC_ALL ; \
1097         echo $(INIT_FILES) | \
1098         tr ' ' '\012' | \
1099         sed \
1100             -e '/^gdbtypes.[co]$$/d' \
1101             -e '/^init.[co]$$/d' \
1102             -e '/xdr_ld.[co]$$/d' \
1103             -e '/xdr_ptrace.[co]$$/d' \
1104             -e '/xdr_rdb.[co]$$/d' \
1105             -e '/udr.[co]$$/d' \
1106             -e '/udip2soc.[co]$$/d' \
1107             -e '/udi2go32.[co]$$/d' \
1108             -e '/version.[co]$$/d' \
1109             -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1110             -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1111             -e 's/\.[co]$$/.c/' \
1112             -e 's,signals\.c,common/signals\.c,' \
1113             -e 's|^\([^  /][^     ]*\)|$(srcdir)/\1|g' | \
1114         while read f; do \
1115             sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1116         done | \
1117         while read f; do \
1118             case " $$fs " in \
1119                 *" $$f "* ) ;; \
1120                 * ) echo $$f ; fs="$$fs $$f";; \
1121             esac; \
1122         done >> init.l-tmp
1123         @echo '/* Do not modify this file.  */' >>init.c-tmp
1124         @echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
1125         @echo '#include "defs.h"      /* For initialize_file_ftype.  */' >>init.c-tmp
1126         @echo '#include "call-cmds.h" /* For initialize_all_files.  */' >>init.c-tmp
1127         @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1128         @echo 'void' >>init.c-tmp
1129         @echo 'initialize_all_files (void)' >>init.c-tmp
1130         @echo '{' >>init.c-tmp
1131         @sed -e 's/\(.*\)/  _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1132         @echo '}' >>init.c-tmp
1133         @rm init.l-tmp
1134         @mv init.c-tmp init.c
1135
1136 .PRECIOUS: init.c
1137
1138 # Removing the old gdb first works better if it is running, at least on SunOS.
1139 gdb$(EXEEXT): gdb.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1140         rm -f gdb$(EXEEXT)
1141         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1142                 -o gdb$(EXEEXT) gdb.o libgdb.a \
1143                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1144
1145 $(TUI)$(EXEEXT): tui-main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1146         rm -f $(TUI)$(EXEEXT)
1147         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1148                 -o $(TUI)$(EXEEXT) tui-main.o libgdb.a \
1149                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1150
1151 # Convenience rule to handle recursion.
1152 $(LIBGNU) $(GNULIB_H): all-lib
1153 all-lib: gnulib/Makefile
1154         @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
1155 .PHONY: all-lib
1156
1157 # Create a library of the gdb object files and build GDB by linking
1158 # against that.
1159 #
1160 # init.o is very important.  It pulls in the rest of GDB.
1161 LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1162 libgdb.a: $(LIBGDB_OBS)
1163         -rm -f libgdb.a
1164         $(AR) q libgdb.a $(LIBGDB_OBS)
1165         $(RANLIB) libgdb.a
1166
1167 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1168 # on itself without copying the executable.  So "make gdb1" will make
1169 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1170 # Removing gdb1 before the copy is the right thing if gdb1 is open
1171 # in another process.
1172 gdb1$(EXEEXT): gdb$(EXEEXT)
1173         rm -f gdb1$(EXEEXT)
1174         cp gdb$(EXEEXT) gdb1$(EXEEXT)
1175
1176 # Put the proper machine-specific files first, so M-. on a machine
1177 # specific routine gets the one for the correct machine.  (FIXME: those
1178 # files go in twice; we should be removing them from the main list).
1179
1180 # TAGS depends on all the files that go into it so you can rebuild TAGS
1181 # with `make TAGS' and not have to say `rm TAGS' first.
1182
1183 GDB_NM_FILE = @GDB_NM_FILE@
1184 TAGS: $(DEPFILES) $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1185         @echo Making TAGS
1186         @etags $(srcdir)/$(GDB_NM_FILE) \
1187         `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1188                 echo $(srcdir)/$$i ; \
1189         done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1190                 echo $$i ; \
1191         done) | sed -e 's/\.o$$/\.c/'` \
1192         `find $(srcdir)/config -name '*.h' -print`
1193
1194 tags: TAGS
1195
1196 clean mostlyclean: $(CONFIG_CLEAN)
1197         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1198         rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1199         rm -f init.c version.c
1200         rm -f gdb$(EXEEXT) core make.log
1201         rm -f gdb[0-9]$(EXEEXT)
1202         rm -f test-cp-name-parser$(EXEEXT)
1203         rm -f xml-builtin.c stamp-xml
1204         rm -f $(DEPDIR)/*
1205
1206 .PHONY: clean-tui
1207 clean-tui:
1208         rm -f $(TUI)$(EXEEXT)
1209
1210 # This used to depend on c-exp.c m2-exp.c TAGS
1211 # I believe this is wrong; the makefile standards for distclean just
1212 # describe removing files; the only sort of "re-create a distribution"
1213 # functionality described is if the distributed files are unmodified.
1214 # NB: While GDBSERVER might be configured on native systems, it isn't
1215 # always included in SUBDIRS.  Remove the gdbserver files explicitly.
1216 distclean: clean
1217         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1218         rm -f gdbserver/config.status gdbserver/config.log
1219         rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1220         rm -f gdbserver/Makefile gdbserver/config.cache
1221         rm -f nm.h config.status config.h stamp-h .gdbinit
1222         rm -f y.output yacc.acts yacc.tmp y.tab.h
1223         rm -f config.log config.cache
1224         rm -f Makefile
1225         rm -rf $(DEPDIR)
1226
1227 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1228 realclean: maintainer-clean
1229
1230 local-maintainer-clean:
1231         @echo "This command is intended for maintainers to use;"
1232         @echo "it deletes files that may require special tools to rebuild."
1233         rm -f c-exp.c \
1234                 cp-name-parser.c \
1235                 ada-lex.c ada-exp.c \
1236                 objc-exp.c \
1237                 jv-exp.tab \
1238                 f-exp.c m2-exp.c p-exp.c
1239         rm -f TAGS $(INFOFILES)
1240         rm -f $(YYFILES)
1241         rm -f nm.h config.status
1242
1243 do-maintainer-clean:
1244         @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1245                 subdir_do
1246
1247 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1248         cd doc; $(MAKE) $(MFLAGS) diststuff
1249
1250 subdir_do: force
1251         @for i in $(DODIRS); do \
1252                 if [ -f ./$$i/Makefile ] ; then \
1253                         if (cd ./$$i; \
1254                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
1255                         else exit 1 ; fi ; \
1256                 else true ; fi ; \
1257         done
1258
1259 Makefile: Makefile.in config.status @frags@
1260         # Regenerate the Makefile and the tm.h / nm.h links.
1261         CONFIG_FILES="Makefile" \
1262           CONFIG_COMMANDS= \
1263           CONFIG_HEADERS= \
1264           $(SHELL) config.status
1265
1266 gnulib/Makefile: gnulib/Makefile.in gnulib/Makefile.in config.status @frags@
1267         CONFIG_FILES="gnulib/Makefile" \
1268           CONFIG_COMMANDS="depfiles" \
1269           CONFIG_HEADERS= \
1270           CONFIG_LINKS= \
1271           $(SHELL) config.status
1272
1273 config.h: stamp-h ; @true
1274 stamp-h: $(srcdir)/config.in config.status
1275         CONFIG_HEADERS=config.h:config.in \
1276           CONFIG_COMMANDS="default depdir" \
1277           CONFIG_FILES= \
1278           CONFIG_LINKS= \
1279           $(SHELL) config.status
1280
1281 config.status: $(srcdir)/configure configure.tgt configure.host
1282         $(SHELL) config.status --recheck
1283
1284 ACLOCAL = aclocal
1285 ACLOCAL_AMFLAGS = -I gnulib/m4
1286 aclocal_m4_deps = \
1287         configure.ac \
1288         gnulib/m4/extensions.m4 \
1289         gnulib/m4/gnulib-common.m4 \
1290         gnulib/m4/gnulib-comp.m4 \
1291         gnulib/m4/include_next.m4 \
1292         gnulib/m4/longlong.m4 \
1293         gnulib/m4/memchr.m4 \
1294         gnulib/m4/memcmp.m4 \
1295         gnulib/m4/memmem.m4 \
1296         gnulib/m4/onceonly_2_57.m4 \
1297         gnulib/m4/stdint.m4 \
1298         gnulib/m4/string_h.m4 \
1299         gnulib/m4/wchar.m4 \
1300         ../config/extensions.m4 \
1301         ../config/lead-dot.m4 \
1302         ../config/proginstall.m4 \
1303         ../bfd/bfd.m4 \
1304         ../config/acinclude.m4 \
1305         ../config/override.m4 \
1306         ../config/gettext-sister.m4 \
1307         ../config/lib-ld.m4 \
1308         ../config/lib-prefix.m4 \
1309         ../config/lib-link.m4 \
1310         ../config/acx.m4 \
1311         ../config/tcl.m4 \
1312         ../config/depstand.m4 \
1313         ../config/lcmessage.m4 \
1314         ../config/codeset.m4
1315
1316 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps)
1317         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
1318
1319 AUTOCONF = autoconf
1320 configure_deps = $(srcdir)/configure.ac $(srcdir)/aclocal.m4
1321 $(srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(configure_deps)
1322         cd $(srcdir) && $(AUTOCONF)
1323
1324 AUTOHEADER = autoheader
1325 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(configure_deps)
1326         cd $(srcdir) && $(AUTOHEADER)
1327         rm -f stamp-h
1328         touch $@
1329
1330 # automatic rebuilding in automake-generated Makefiles requires
1331 # this rule in the toplevel Makefile, which, with GNU make, causes
1332 # the desired updates through the implicit regeneration of the Makefile
1333 # and all of its prerequisites.
1334 am--refresh:
1335         @:
1336
1337 force:
1338
1339 # Documentation!
1340 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1341 doc/refcard.dvi:
1342         cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
1343
1344 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1345 doc/refcard.ps:
1346         cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
1347
1348 # GDB MANUAL: TeX dvi file
1349 doc/gdb.dvi:
1350         cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
1351
1352 # GDB MANUAL: info file
1353 doc/gdb.info:
1354         cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
1355
1356 # Make copying.c from COPYING
1357 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
1358         awk -f $(srcdir)/copying.awk \
1359                 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
1360         mv $(srcdir)/copying.tmp $(srcdir)/copying.c
1361
1362 version.c: Makefile version.in
1363         rm -f version.c-tmp version.c
1364         echo '#include "version.h"' >> version.c-tmp
1365         echo 'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1366         echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1367         echo 'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1368         mv version.c-tmp version.c
1369
1370 observer.h: observer.sh doc/observer.texi
1371         ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
1372
1373 observer.inc: observer.sh doc/observer.texi
1374         ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
1375
1376 lint: $(LINTFILES)
1377         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
1378            `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1379
1380 gdb.cxref: $(SFILES)
1381         cxref -I. $(SFILES) >gdb.cxref
1382
1383 force_update:
1384
1385 # GNU Make has an annoying habit of putting *all* the Makefile variables
1386 # into the environment, unless you include this target as a circumvention.
1387 # Rumor is that this will be fixed (and this target can be removed)
1388 # in GNU Make 4.0.
1389 .NOEXPORT:
1390
1391 # GNU Make 3.63 has a different problem: it keeps tacking command line
1392 # overrides onto the definition of $(MAKE).  This variable setting
1393 # will remove them.
1394 MAKEOVERRIDES=
1395
1396 ALLDEPFILES = \
1397         aix-thread.c \
1398         alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1399         alpha-tdep.c alpha-mdebug-tdep.c \
1400         alpha-linux-tdep.c alpha-osf1-tdep.c \
1401         alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1402         amd64-nat.c amd64-tdep.c \
1403         amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1404         amd64nbsd-nat.c amd64nbsd-tdep.c \
1405         amd64obsd-nat.c amd64obsd-tdep.c \
1406         amd64-darwin-tdep.c \
1407         amd64-dicos-tdep.c \
1408         amd64-linux-nat.c amd64-linux-tdep.c \
1409         amd64-sol2-tdep.c \
1410         arm-linux-nat.c arm-linux-tdep.c arm-symbian-tdep.c arm-tdep.c \
1411         armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1412         avr-tdep.c \
1413         bsd-uthread.c bsd-kvm.c \
1414         core-regset.c corelow.c \
1415         dcache.c dicos-tdep.c darwin-nat.c \
1416         exec.c \
1417         fbsd-nat.c \
1418         fork-child.c \
1419         glibc-tdep.c \
1420         go32-nat.c h8300-tdep.c \
1421         hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1422         hppa-linux-tdep.c hppa-linux-nat.c \
1423         hppabsd-nat.c hppabsd-tdep.c \
1424         hppaobsd-tdep.c \
1425         hppanbsd-nat.c hppanbsd-tdep.c \
1426         i386-tdep.c i386-linux-nat.c \
1427         i386v4-nat.c i386-cygwin-tdep.c \
1428         i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1429         i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1430         i387-tdep.c \
1431         i386-darwin-tdep.c i386-darwin-nat.c \
1432         i386-dicos-tdep.c \
1433         i386-linux-tdep.c i386-nat.c \
1434         i386-sol2-nat.c i386-sol2-tdep.c \
1435         i386gnu-nat.c i386gnu-tdep.c \
1436         ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1437         inf-ptrace.c inf-ttrace.c \
1438         irix5-nat.c \
1439         libunwind-frame.c \
1440         linux-fork.c \
1441         linux-tdep.c \
1442         linux-record.c \
1443         lm32-tdep.c \
1444         m68hc11-tdep.c \
1445         m32r-tdep.c \
1446         m32r-linux-nat.c m32r-linux-tdep.c \
1447         m68k-tdep.c \
1448         m68kbsd-nat.c m68kbsd-tdep.c \
1449         m68klinux-nat.c m68klinux-tdep.c \
1450         m88k-tdep.c m88kbsd-nat.c \
1451         microblaze-tdep.c microblaze-linux-tdep.c \
1452         mingw-hdep.c \
1453         mips-linux-nat.c mips-linux-tdep.c \
1454         mips-irix-tdep.c \
1455         mips-tdep.c \
1456         mipsnbsd-nat.c mipsnbsd-tdep.c \
1457         mips64obsd-nat.c mips64obsd-tdep.c \
1458         nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1459         solib-osf.c \
1460         solib-target.c \
1461         somread.c solib-som.c \
1462         posix-hdep.c \
1463         ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1464         ppcnbsd-nat.c ppcnbsd-tdep.c \
1465         ppcobsd-nat.c ppcobsd-tdep.c \
1466         procfs.c \
1467         remote-m32r-sdi.c remote-mips.c \
1468         remote-sim.c \
1469         dcache.c \
1470         rs6000-nat.c rs6000-tdep.c \
1471         s390-tdep.c s390-nat.c \
1472         score-tdep.c \
1473         ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1474         sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1475         sol2-tdep.c \
1476         solib-irix.c solib-svr4.c solib-sunos.c \
1477         sparc-linux-nat.c sparc-linux-tdep.c \
1478         sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-sol2-tdep.c \
1479         sparc-nat.c sparc-tdep.c sparc64-linux-nat.c sparc64-linux-tdep.c \
1480         sparc64-nat.c sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1481         sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1482         sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1483         spu-linux-nat.c spu-tdep.c spu-multiarch.c solib-spu.c \
1484         v850-tdep.c \
1485         vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1486         windows-nat.c windows-tdep.c \
1487         xcoffread.c xcoffsolib.c \
1488         xstormy16-tdep.c \
1489         xtensa-tdep.c xtensa-config.c \
1490         xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1491
1492 # Some files need explicit build rules (due to -Werror problems) or due
1493 # to sub-directory fun 'n' games.
1494
1495 hpux-thread.o: $(srcdir)/hpux-thread.c
1496         $(COMPILE) -I$(srcdir)/osf-share -I$(srcdir)/osf-share/HP800 \
1497                 -I/usr/include/dce $(srcdir)/hpux-thread.c
1498         $(POSTCOMPILE)
1499
1500 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1501 main.o: $(srcdir)/main.c
1502         $(COMPILE) $(TARGET_SYSTEM_ROOT_DEFINE) -DBINDIR=\"$(bindir)\" $(srcdir)/main.c
1503         $(POSTCOMPILE)
1504
1505 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1506 # errors.  It turns out that that is the least of monitor.c's
1507 # problems.  The function print_vsprintf appears to be using
1508 # va_arg(long) to extract CORE_ADDR parameters - something that
1509 # definitly will not work.  "monitor.c" needs to be rewritten so that
1510 # it doesn't use format strings and instead uses callbacks.
1511 monitor.o: $(srcdir)/monitor.c
1512         $(COMPILE.pre) $(INTERNAL_WARN_CFLAGS) $(COMPILE.post) $(srcdir)/monitor.c
1513         $(POSTCOMPILE)
1514
1515 # Do not try to build "printcmd.c" with -Wformat-nonliteral.  It manually
1516 # checks format strings.
1517 printcmd.o: $(srcdir)/printcmd.c
1518         $(COMPILE.pre) $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS_NO_FORMAT) \
1519                 $(GDB_WERROR_CFLAGS) $(COMPILE.post) $(srcdir)/printcmd.c
1520         $(POSTCOMPILE)
1521
1522 # Message files.  Based on code in gcc/Makefile.in.
1523
1524 # Rules for generating translated message descriptions.  Disabled by
1525 # autoconf if the tools are not available.
1526
1527 .SUFFIXES: .po .gmo .pox .pot
1528 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
1529
1530 all-po: $(CATALOGS)
1531
1532 # This notation should be acceptable to all Make implementations used
1533 # by people who are interested in updating .po files.
1534 update-po: $(CATALOGS:.gmo=.pox)
1535
1536 # N.B. We do not attempt to copy these into $(srcdir).  The snapshot
1537 # script does that.
1538 .po.gmo:
1539         -test -d po || mkdir po
1540         $(GMSGFMT) --statistics -o $@ $<
1541
1542 # The new .po has to be gone over by hand, so we deposit it into
1543 # build/po with a different extension.  If build/po/$(PACKAGE).pot
1544 # exists, use it (it was just created), else use the one in srcdir.
1545 .po.pox:
1546         -test -d po || mkdir po
1547         $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
1548                         then echo po/$(PACKAGE).pot; \
1549                         else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
1550
1551 # This rule has to look for .gmo modules in both srcdir and the cwd,
1552 # and has to check that we actually have a catalog for each language,
1553 # in case they weren't built or included with the distribution.
1554 install-po:
1555         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
1556         cats="$(CATALOGS)"; for cat in $$cats; do \
1557           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1558           if [ -f $$cat ]; then :; \
1559           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1560           else continue; \
1561           fi; \
1562           dir=$(localedir)/$$lang/LC_MESSAGES; \
1563           echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
1564           $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
1565           echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1566           $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1567         done
1568 uninstall-po:
1569         cats="$(CATALOGS)"; for cat in $$cats; do \
1570           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1571           if [ -f $$cat ]; then :; \
1572           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1573           else continue; \
1574           fi; \
1575           dir=$(localedir)/$$lang/LC_MESSAGES; \
1576           rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
1577         done
1578 # Delete po/*.gmo only if we are not building in the source directory.
1579 clean-po:
1580         -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
1581
1582 # Rule for regenerating the message template (gdb.pot).  Instead of
1583 # forcing everyone to edit POTFILES.in, which proved impractical, this
1584 # rule has no dependencies and always regenerates gdb.pot.  This is
1585 # relatively harmless since the .po files do not directly depend on
1586 # it.  The .pot file is left in the build directory.  Since GDB's
1587 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1588 # files) force this rule.
1589 $(PACKAGE).pot: po/$(PACKAGE).pot
1590 po/$(PACKAGE).pot: force
1591         -test -d po || mkdir po
1592         sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
1593
1594
1595 #
1596 # YACC/LEX dependencies
1597 #
1598 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1599 # exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
1600 # said LANG-exp.c rather than ./c-exp.c some makes would
1601 # sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
1602 # decls for malloc/realloc/free which conflict with everything else.
1603 # Strictly speaking c-exp.c should therefore depend on
1604 # Makefile.in, but that was a pretty big annoyance.
1605
1606 .SUFFIXES: .y .l
1607 .y.c:
1608         $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- $(YACC) $(YFLAGS)
1609         -sed -e '/extern.*malloc/d' \
1610              -e '/extern.*realloc/d' \
1611              -e '/extern.*free/d' \
1612              -e '/include.*malloc.h/d' \
1613              -e 's/\([^x]\)malloc/\1xmalloc/g' \
1614              -e 's/\([^x]\)realloc/\1xrealloc/g' \
1615              -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1616              -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1617              -e '/^#line.*y.tab.c/d' \
1618           < $@.tmp > $@.new
1619         -rm $@.tmp
1620         mv $@.new ./$*.c
1621 .l.c:
1622         if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
1623             $(FLEX) -o$@ $< && \
1624             rm -f $@.new && \
1625             sed -e '/extern.*malloc/d' \
1626                 -e '/extern.*realloc/d' \
1627                 -e '/extern.*free/d' \
1628                 -e '/include.*malloc.h/d' \
1629                 -e 's/\([^x]\)malloc/\1xmalloc/g' \
1630                 -e 's/\([^x]\)realloc/\1xrealloc/g' \
1631                 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1632                 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1633                 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
1634               < $@ > $@.new && \
1635             rm -f $@ && \
1636             mv $@.new $@; \
1637         elif [ -f $@ ]; then \
1638             echo "Warning: $*.c older than $*.l and flex not available."; \
1639         else \
1640             echo "$@ missing and flex not available."; \
1641             false; \
1642         fi
1643
1644 .PRECIOUS: ada-exp.c ada-lex.c
1645 .PRECIOUS: c-exp.c
1646 .PRECIOUS: f-exp.c
1647 .PRECIOUS: jv-exp.c
1648 .PRECIOUS: m2-exp.c
1649 .PRECIOUS: objc-exp.c
1650 .PRECIOUS: p-exp.c
1651
1652 # XML rules
1653
1654 xml-builtin.c: stamp-xml; @true
1655 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
1656         rm -f xml-builtin.tmp
1657         AWK="$(AWK)" \
1658           $(SHELL) $(srcdir)/features/feature_to_c.sh \
1659           xml-builtin.tmp $(XMLFILES)
1660         $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
1661         echo stamp > stamp-xml
1662
1663 .PRECIOUS: xml-builtin.c
1664
1665 #
1666 # gdb/cli/ dependencies
1667 #
1668 # Need to explicitly specify the compile rule as make will do nothing
1669 # or try to compile the object file into the sub-directory.
1670
1671 cli-cmds.o: $(srcdir)/cli/cli-cmds.c
1672         $(COMPILE) $(srcdir)/cli/cli-cmds.c
1673         $(POSTCOMPILE)
1674
1675 cli-decode.o: $(srcdir)/cli/cli-decode.c
1676         $(COMPILE) $(srcdir)/cli/cli-decode.c
1677         $(POSTCOMPILE)
1678
1679 cli-dump.o: $(srcdir)/cli/cli-dump.c
1680         $(COMPILE) $(srcdir)/cli/cli-dump.c
1681         $(POSTCOMPILE)
1682
1683 cli-interp.o: $(srcdir)/cli/cli-interp.c
1684         $(COMPILE) $(srcdir)/cli/cli-interp.c
1685         $(POSTCOMPILE)
1686
1687 cli-logging.o: $(srcdir)/cli/cli-logging.c
1688         $(COMPILE) $(srcdir)/cli/cli-logging.c
1689         $(POSTCOMPILE)
1690
1691 cli-script.o: $(srcdir)/cli/cli-script.c
1692         $(COMPILE) $(srcdir)/cli/cli-script.c
1693         $(POSTCOMPILE)
1694
1695 cli-setshow.o: $(srcdir)/cli/cli-setshow.c
1696         $(COMPILE) $(srcdir)/cli/cli-setshow.c
1697         $(POSTCOMPILE)
1698
1699
1700 #
1701 # GDBTK sub-directory
1702 #
1703 # Need to explicitly specify the compile rule as make will do nothing
1704 # or try to compile the object file into the mi directory.
1705
1706 all-gdbtk: insight$(EXEEXT)
1707
1708 install-gdbtk:
1709         transformed_name=`t='$(program_transform_name)'; \
1710                   echo insight | sed -e $$t` ; \
1711         if test "x$$transformed_name" = x; then \
1712           transformed_name=insight ; \
1713         else \
1714           true ; \
1715         fi ; \
1716         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
1717         $(INSTALL_PROGRAM) insight$(EXEEXT) \
1718                 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1719         $(SHELL) $(srcdir)/../mkinstalldirs \
1720                 $(DESTDIR)$(GDBTK_LIBRARY) ; \
1721         $(SHELL) $(srcdir)/../mkinstalldirs \
1722                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
1723         $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
1724                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
1725         $(SHELL) $(srcdir)/../mkinstalldirs \
1726                 $(DESTDIR)$(GDBTK_LIBRARY)/images \
1727                 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
1728         $(SHELL) $(srcdir)/../mkinstalldirs \
1729                 $(DESTDIR)$(GDBTK_LIBRARY)/help \
1730                 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
1731                 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
1732         cd $(srcdir)/gdbtk/library ; \
1733         for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
1734           do \
1735                 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
1736           done ;
1737
1738 uninstall-gdbtk:
1739         transformed_name=`t='$(program_transform_name)'; \
1740                   echo insight | sed -e $$t` ; \
1741         if test "x$$transformed_name" = x; then \
1742                 transformed_name=insight ; \
1743         else \
1744                 true ; \
1745         fi ; \
1746         rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1747         rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
1748
1749 clean-gdbtk:
1750         rm -f insight$(EXEEXT)
1751
1752 # Removing the old gdb first works better if it is running, at least on SunOS.
1753 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
1754                 $(CDEPS) $(TDEPLIBS)
1755         rm -f insight$(EXEEXT)
1756         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1757                 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
1758                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1759
1760 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
1761         $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
1762
1763 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
1764                 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
1765                 $(GDBTK_CFLAGS) \
1766                 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
1767                 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
1768
1769 gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
1770         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
1771         $(POSTCOMPILE)
1772
1773 gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
1774         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
1775         $(POSTCOMPILE)
1776
1777 gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1778         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1779         $(POSTCOMPILE)
1780
1781 gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1782         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1783         $(POSTCOMPILE)
1784
1785 gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
1786         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
1787         $(POSTCOMPILE)
1788
1789 gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
1790         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
1791         $(POSTCOMPILE)
1792
1793 gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
1794         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
1795         $(POSTCOMPILE)
1796
1797 gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
1798         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
1799         $(POSTCOMPILE)
1800
1801 gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1802         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1803         $(POSTCOMPILE)
1804
1805 gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1806         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1807         $(POSTCOMPILE)
1808
1809
1810 #
1811 # gdb/mi/ dependencies
1812 #
1813 # Need to explicitly specify the compile rule as make will do nothing
1814 # or try to compile the object file into the sub-directory.
1815
1816 mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
1817         $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
1818         $(POSTCOMPILE)
1819
1820 mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
1821         $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
1822         $(POSTCOMPILE)
1823
1824 mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
1825         $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
1826         $(POSTCOMPILE)
1827
1828 mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
1829         $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
1830         $(POSTCOMPILE)
1831
1832 mi-cmds.o: $(srcdir)/mi/mi-cmds.c
1833         $(COMPILE) $(srcdir)/mi/mi-cmds.c
1834         $(POSTCOMPILE)
1835
1836 mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
1837         $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
1838         $(POSTCOMPILE)
1839
1840 mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
1841         $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
1842         $(POSTCOMPILE)
1843
1844 mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
1845         $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
1846         $(POSTCOMPILE)
1847
1848 mi-console.o: $(srcdir)/mi/mi-console.c
1849         $(COMPILE) $(srcdir)/mi/mi-console.c
1850         $(POSTCOMPILE)
1851
1852 mi-getopt.o: $(srcdir)/mi/mi-getopt.c
1853         $(COMPILE) $(srcdir)/mi/mi-getopt.c
1854         $(POSTCOMPILE)
1855
1856 mi-interp.o: $(srcdir)/mi/mi-interp.c
1857         $(COMPILE) $(srcdir)/mi/mi-interp.c
1858         $(POSTCOMPILE)
1859
1860 mi-main.o: $(srcdir)/mi/mi-main.c
1861         $(COMPILE) $(srcdir)/mi/mi-main.c
1862         $(POSTCOMPILE)
1863
1864 mi-out.o: $(srcdir)/mi/mi-out.c
1865         $(COMPILE) $(srcdir)/mi/mi-out.c
1866         $(POSTCOMPILE)
1867
1868 mi-parse.o: $(srcdir)/mi/mi-parse.c
1869         $(COMPILE) $(srcdir)/mi/mi-parse.c
1870         $(POSTCOMPILE)
1871
1872 mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
1873         $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
1874         $(POSTCOMPILE)
1875
1876 mi-common.o: $(srcdir)/mi/mi-common.c
1877         $(COMPILE) $(srcdir)/mi/mi-common.c
1878         $(POSTCOMPILE)
1879
1880 #
1881 # gdb/common/ dependencies
1882 #
1883 # Need to explicitly specify the compile rule as make will do nothing
1884 # or try to compile the object file into the sub-directory.
1885
1886 signals.o: $(srcdir)/common/signals.c
1887         $(COMPILE) $(srcdir)/common/signals.c
1888         $(POSTCOMPILE)
1889
1890 #
1891 # gdb/tui/ dependencies
1892 #
1893 # Need to explicitly specify the compile rule as make will do nothing
1894 # or try to compile the object file into the sub-directory.
1895
1896 tui.o: $(srcdir)/tui/tui.c
1897         $(COMPILE) $(srcdir)/tui/tui.c
1898         $(POSTCOMPILE)
1899
1900 tui-command.o: $(srcdir)/tui/tui-command.c
1901         $(COMPILE) $(srcdir)/tui/tui-command.c
1902         $(POSTCOMPILE)
1903
1904 tui-data.o: $(srcdir)/tui/tui-data.c
1905         $(COMPILE) $(srcdir)/tui/tui-data.c
1906         $(POSTCOMPILE)
1907
1908 tui-disasm.o: $(srcdir)/tui/tui-disasm.c
1909         $(COMPILE) $(srcdir)/tui/tui-disasm.c
1910         $(POSTCOMPILE)
1911
1912 tui-file.o: $(srcdir)/tui/tui-file.c
1913         $(COMPILE) $(srcdir)/tui/tui-file.c
1914         $(POSTCOMPILE)
1915
1916 tui-hooks.o: $(srcdir)/tui/tui-hooks.c
1917         $(COMPILE) $(srcdir)/tui/tui-hooks.c
1918         $(POSTCOMPILE)
1919
1920 tui-interp.o: $(srcdir)/tui/tui-interp.c
1921         $(COMPILE) $(srcdir)/tui/tui-interp.c
1922         $(POSTCOMPILE)
1923
1924 tui-io.o: $(srcdir)/tui/tui-io.c
1925         $(COMPILE) $(srcdir)/tui/tui-io.c
1926         $(POSTCOMPILE)
1927
1928 tui-layout.o: $(srcdir)/tui/tui-layout.c
1929         $(COMPILE) $(srcdir)/tui/tui-layout.c
1930         $(POSTCOMPILE)
1931
1932 tui-main.o: $(srcdir)/tui/tui-main.c
1933         $(COMPILE) $(srcdir)/tui/tui-main.c
1934         $(POSTCOMPILE)
1935
1936 tui-out.o: $(srcdir)/tui/tui-out.c
1937         $(COMPILE) $(srcdir)/tui/tui-out.c
1938         $(POSTCOMPILE)
1939
1940 tui-regs.o: $(srcdir)/tui/tui-regs.c
1941         $(COMPILE) $(srcdir)/tui/tui-regs.c
1942         $(POSTCOMPILE)
1943
1944 tui-source.o: $(srcdir)/tui/tui-source.c
1945         $(COMPILE) $(srcdir)/tui/tui-source.c
1946         $(POSTCOMPILE)
1947
1948 tui-stack.o: $(srcdir)/tui/tui-stack.c
1949         $(COMPILE) $(srcdir)/tui/tui-stack.c
1950         $(POSTCOMPILE)
1951
1952 tui-win.o: $(srcdir)/tui/tui-win.c
1953         $(COMPILE) $(srcdir)/tui/tui-win.c
1954         $(POSTCOMPILE)
1955
1956 tui-windata.o: $(srcdir)/tui/tui-windata.c
1957         $(COMPILE) $(srcdir)/tui/tui-windata.c
1958         $(POSTCOMPILE)
1959
1960 tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
1961         $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
1962         $(POSTCOMPILE)
1963
1964 tui-winsource.o: $(srcdir)/tui/tui-winsource.c
1965         $(COMPILE) $(srcdir)/tui/tui-winsource.c
1966         $(POSTCOMPILE)
1967
1968 #
1969 # gdb/python/ dependencies
1970 #
1971 # Need to explicitly specify the compile rule as make will do nothing
1972 # or try to compile the object file into the sub-directory.
1973
1974 # Flags needed to compile Python code
1975 PYTHON_CFLAGS=@PYTHON_CFLAGS@
1976
1977 python.o: $(srcdir)/python/python.c
1978         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
1979         $(POSTCOMPILE)
1980
1981 py-block.o: $(srcdir)/python/py-block.c
1982         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c
1983         $(POSTCOMPILE)
1984
1985 py-cmd.o: $(srcdir)/python/py-cmd.c
1986         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c
1987         $(POSTCOMPILE)
1988
1989 py-frame.o: $(srcdir)/python/py-frame.c
1990         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c
1991         $(POSTCOMPILE)
1992
1993 py-function.o: $(srcdir)/python/py-function.c
1994         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c
1995         $(POSTCOMPILE)
1996
1997 py-lazy-string.o: $(srcdir)/python/py-lazy-string.c
1998         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c
1999         $(POSTCOMPILE)
2000
2001 py-objfile.o: $(srcdir)/python/py-objfile.c
2002         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c
2003         $(POSTCOMPILE)
2004
2005 py-prettyprint.o: $(srcdir)/python/py-prettyprint.c
2006         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c
2007         $(POSTCOMPILE)
2008
2009 py-symbol.o: $(srcdir)/python/py-symbol.c
2010         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c
2011         $(POSTCOMPILE)
2012
2013 py-symtab.o: $(srcdir)/python/py-symtab.c
2014         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c
2015         $(POSTCOMPILE)
2016
2017 py-type.o: $(srcdir)/python/py-type.c
2018         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c
2019         $(POSTCOMPILE)
2020
2021 py-utils.o: $(srcdir)/python/py-utils.c
2022         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c
2023         $(POSTCOMPILE)
2024
2025 py-value.o: $(srcdir)/python/py-value.c
2026         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c
2027         $(POSTCOMPILE)
2028
2029 #
2030 # Dependency tracking.  Most of this is conditional on GNU Make being
2031 # found by configure; if GNU Make is not found, we fall back to a
2032 # simpler scheme.
2033 #
2034
2035 @GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
2036 # Note that we put the dependencies into a .Tpo file, then move them
2037 # into place if the compile succeeds.  We need this because gcc does
2038 # not atomically write the dependency output file.
2039 @GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
2040 @GMAKE_TRUE@    -MF $(DEPDIR)/$(basename $(@F)).Tpo
2041 @GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
2042 @GMAKE_TRUE@    $(DEPDIR)/$(basename $(@F)).Po
2043 @GMAKE_TRUE@else
2044 @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
2045 @GMAKE_TRUE@    DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
2046 # depcomp handles atomicity for us, so we don't need a postcompile
2047 # step.
2048 @GMAKE_TRUE@override POSTCOMPILE =
2049 @GMAKE_TRUE@endif
2050
2051 # A list of all the objects we might care about in this build, for
2052 # dependency tracking.
2053 all_object_files = gdb.o tui-main.o $(LIBGDB_OBS) gdbtk-main.o \
2054         test-cp-name-parser.o
2055
2056 # Ensure that generated files are created early.  Use order-only
2057 # dependencies if available.  They require GNU make 3.80 or newer,
2058 # and the .VARIABLES variable was introduced at the same time.
2059 @GMAKE_TRUE@ifdef .VARIABLES
2060 @GMAKE_TRUE@$(all_object_files): | $(generated_files)
2061 @GMAKE_TRUE@else
2062 $(all_object_files) : $(generated_files)
2063 @GMAKE_TRUE@endif
2064
2065 # Dependencies.
2066 @GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
2067
2068 ### end of the gdb Makefile.in.