gdb/Makefile.in

   1 # Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
   2 # 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
   3 # Free Software Foundation, Inc.
   4
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 3 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  19
  20 prefix = @prefix@
  21 exec_prefix = @exec_prefix@
  22
  23 host_alias = @host_alias@
  24 target_alias = @target_alias@
  25 program_transform_name = @program_transform_name@
  26 bindir = @bindir@
  27 libdir = @libdir@
  28 tooldir = $(libdir)/$(target_alias)
  29
  30 datadir = @datadir@
  31 localedir = @localedir@
  32 mandir = @mandir@
  33 man1dir = $(mandir)/man1
  34 man2dir = $(mandir)/man2
  35 man3dir = $(mandir)/man3
  36 man4dir = $(mandir)/man4
  37 man5dir = $(mandir)/man5
  38 man6dir = $(mandir)/man6
  39 man7dir = $(mandir)/man7
  40 man8dir = $(mandir)/man8
  41 man9dir = $(mandir)/man9
  42 infodir = @infodir@
  43 datarootdir = @datarootdir@
  44 docdir = @docdir@
  45 htmldir = @htmldir@
  46 pdfdir = @pdfdir@
  47 includedir = @includedir@
  48
  49 # This can be referenced by `LIBINTL' as computed by
  50 # ZW_GNU_GETTEXT_SISTER_DIR.
  51 top_builddir = .
  52
  53 SHELL = @SHELL@
  54 EXEEXT = @EXEEXT@
  55
  56 AWK = @AWK@
  57 LN_S = @LN_S@
  58
  59 INSTALL = @INSTALL@
  60 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  61 INSTALL_DATA = @INSTALL_DATA@
  62
  63 DESTDIR =
  64
  65 AR = @AR@
  66 AR_FLAGS = qv
  67 RANLIB = @RANLIB@
  68 DLLTOOL = @DLLTOOL@
  69 WINDRES = @WINDRES@
  70 MIG = @MIG@
  71
  72 XGETTEXT = @XGETTEXT@
  73 GMSGFMT = @GMSGFMT@
  74 MSGMERGE = msgmerge
  75
  76 PACKAGE = @PACKAGE@
  77 CATALOGS = @CATALOGS@
  78
  79 # If you are compiling with GCC, make sure that either 1) You have the
  80 # fixed include files where GCC can reach them, or 2) You use the
  81 # -traditional flag.  Otherwise the ioctl calls in inflow.c
  82 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  83 # distribution will fix your include files up.
  84 CC=@CC@
  85
  86 # Dependency tracking information.
  87 DEPMODE = @CCDEPMODE@
  88 DEPDIR = @DEPDIR@
  89 depcomp = $(SHELL) $(srcdir)/../depcomp
  90
  91 # Note that these are overridden by GNU make-specific code below if
  92 # GNU make is used.  The overrides implement dependency tracking.
  93 COMPILE.pre = $(CC)
  94 COMPILE.post = -c -o $@
  95 COMPILE = $(COMPILE.pre) $(INTERNAL_CFLAGS) $(COMPILE.post)
  96 POSTCOMPILE = @true
  97
  98 # Directory containing source files.
  99 srcdir = @srcdir@
 100 VPATH = @srcdir@
 101
 102 YACC=@YACC@
 103
 104 # This is used to rebuild ada-lex.c from ada-lex.l.  If the program is
 105 # not defined, but ada-lex.c is present, compilation will continue,
 106 # possibly with a warning.
 107 FLEX = flex
 108
 109 YLWRAP = $(srcdir)/../ylwrap
 110
 111 # where to find makeinfo, preferably one designed for texinfo-2
 112 MAKEINFO=makeinfo
 113
 114 MAKEHTML = $(MAKEINFO) --html
 115 MAKEHTMLFLAGS =
 116
 117 # Set this up with gcc if you have gnu ld and the loader will print out
 118 # line numbers for undefined references.
 119 #CC_LD=gcc -static
 120 CC_LD=$(CC)
 121
 122 # Where is our "include" directory?  Typically $(srcdir)/../include.
 123 # This is essentially the header file directory for the library
 124 # routines in libiberty.
 125 INCLUDE_DIR =  $(srcdir)/../include
 126 INCLUDE_CFLAGS = -I$(INCLUDE_DIR)
 127
 128 # Where is the "-liberty" library?  Typically in ../libiberty.
 129 LIBIBERTY = ../libiberty/libiberty.a
 130
 131 # Where is the BFD library?  Typically in ../bfd.
 132 BFD_DIR = ../bfd
 133 BFD = $(BFD_DIR)/libbfd.a
 134 BFD_SRC = $(srcdir)/$(BFD_DIR)
 135 BFD_CFLAGS = -I$(BFD_DIR) -I$(BFD_SRC)
 136
 137 # Where is the decnumber library?  Typically in ../libdecnumber.
 138 LIBDECNUMBER_DIR = ../libdecnumber
 139 LIBDECNUMBER = $(LIBDECNUMBER_DIR)/libdecnumber.a
 140 LIBDECNUMBER_SRC = $(srcdir)/$(LIBDECNUMBER_DIR)
 141 LIBDECNUMBER_CFLAGS = -I$(LIBDECNUMBER_DIR) -I$(LIBDECNUMBER_SRC)
 142
 143 # Where is the READLINE library?  Typically in ../readline.
 144 READLINE_DIR = ../readline
 145 READLINE_SRC = $(srcdir)/$(READLINE_DIR)
 146 READLINE = @READLINE@
 147 READLINE_DEPS = @READLINE_DEPS@
 148 READLINE_CFLAGS = @READLINE_CFLAGS@
 149
 150 # Where is expat?  This will be empty if expat was not available.
 151 LIBEXPAT = @LIBEXPAT@
 152
 153 WARN_CFLAGS = @WARN_CFLAGS@
 154 WERROR_CFLAGS = @WERROR_CFLAGS@
 155 GDB_WARN_CFLAGS = $(WARN_CFLAGS)
 156 GDB_WERROR_CFLAGS = $(WERROR_CFLAGS)
 157
 158 GDB_WARN_CFLAGS_NO_FORMAT = `echo " $(GDB_WARN_CFLAGS) " | sed "s/ -Wformat-nonliteral / /g"`
 159
 160 # Where is the INTL library?  Typically in ../intl.
 161 INTL = @LIBINTL@
 162 INTL_DEPS = @LIBINTL_DEP@
 163 INTL_CFLAGS = @INCINTL@
 164
 165 # Did the user give us a --with-sysroot option?
 166 TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@
 167 TARGET_SYSTEM_ROOT_DEFINE = @TARGET_SYSTEM_ROOT_DEFINE@
 168
 169 # Helper code from gnulib.
 170 LIBGNU = gnulib/libgnu.a
 171 INCGNU = -I$(srcdir)/gnulib -Ignulib
 172
 173 # Generated headers in the gnulib directory.  These must be listed
 174 # so that they are generated before other files are compiled.
 175 GNULIB_H = gnulib/string.h @GNULIB_STDINT_H@
 176
 177 #
 178 # CLI sub directory definitons
 179 #
 180 SUBDIR_CLI_OBS = \
 181         cli-dump.o \
 182         cli-decode.o cli-script.o cli-cmds.o cli-setshow.o \
 183         cli-logging.o \
 184         cli-interp.o
 185 SUBDIR_CLI_SRCS = \
 186         cli/cli-dump.c \
 187         cli/cli-decode.c cli/cli-script.c cli/cli-cmds.c cli/cli-setshow.c \
 188         cli/cli-logging.c \
 189         cli/cli-interp.c
 190 SUBDIR_CLI_DEPS =
 191 SUBDIR_CLI_LDFLAGS=
 192 SUBDIR_CLI_CFLAGS=
 193
 194 #
 195 # MI sub directory definitons
 196 #
 197 SUBDIR_MI_OBS = \
 198         mi-out.o mi-console.o \
 199         mi-cmds.o mi-cmd-env.o mi-cmd-var.o mi-cmd-break.o mi-cmd-stack.o \
 200         mi-cmd-file.o mi-cmd-disas.o mi-symbol-cmds.o mi-cmd-target.o \
 201         mi-interp.o \
 202         mi-main.o mi-parse.o mi-getopt.o mi-common.o
 203 SUBDIR_MI_SRCS = \
 204         mi/mi-out.c mi/mi-console.c \
 205         mi/mi-cmds.c mi/mi-cmd-env.c \
 206         mi/mi-cmd-var.c mi/mi-cmd-break.c mi/mi-cmd-stack.c \
 207         mi/mi-cmd-file.c mi/mi-cmd-disas.c mi/mi-symbol-cmds.c \
 208         mi/mi-cmd-target.c mi/mi-interp.c \
 209         mi/mi-main.c mi/mi-parse.c mi/mi-getopt.c mi/mi-common.c
 210 SUBDIR_MI_DEPS =
 211 SUBDIR_MI_LDFLAGS=
 212 SUBDIR_MI_CFLAGS= \
 213         -DMI_OUT=1
 214
 215 #
 216 # TUI sub directory definitions
 217 #
 218
 219 # Name of the TUI program
 220 TUI=gdbtui
 221
 222 SUBDIR_TUI_OBS = \
 223         tui-command.o \
 224         tui-data.o \
 225         tui-disasm.o \
 226         tui-file.o tui.o \
 227         tui-hooks.o \
 228         tui-interp.o \
 229         tui-io.o \
 230         tui-layout.o \
 231         tui-out.o \
 232         tui-regs.o \
 233         tui-source.o \
 234         tui-stack.o \
 235         tui-win.o \
 236         tui-windata.o \
 237         tui-wingeneral.o \
 238         tui-winsource.o
 239 SUBDIR_TUI_SRCS = \
 240         tui/tui-command.c \
 241         tui/tui-data.c \
 242         tui/tui-disasm.c \
 243         tui/tui-file.c \
 244         tui/tui-hooks.c \
 245         tui/tui-interp.c \
 246         tui/tui-io.c \
 247         tui/tui-layout.c \
 248         tui/tui-out.c \
 249         tui/tui-regs.c \
 250         tui/tui-source.c \
 251         tui/tui-stack.c \
 252         tui/tui-win.c \
 253         tui/tui-windata.c \
 254         tui/tui-wingeneral.c \
 255         tui/tui-winsource.c \
 256         tui/tui.c
 257 SUBDIR_TUI_DEPS =
 258 SUBDIR_TUI_LDFLAGS=
 259 SUBDIR_TUI_CFLAGS= \
 260         -DTUI=1
 261
 262 #
 263 # python sub directory definitons
 264 #
 265 SUBDIR_PYTHON_OBS = \
 266         python.o \
 267         python-cmd.o \
 268         python-frame.o \
 269         python-function.o \
 270         python-utils.o \
 271         python-value.o
 272 SUBDIR_PYTHON_SRCS = \
 273         python/python.c \
 274         python/python-cmd.c \
 275         python/python-frame.c \
 276         python/python-function.c \
 277         python/python-utils.c \
 278         python/python-value.c
 279 SUBDIR_PYTHON_DEPS =
 280 SUBDIR_PYTHON_LDFLAGS=
 281 SUBDIR_PYTHON_CFLAGS=
 282
 283
 284 # Opcodes currently live in one of two places.  Either they are in the
 285 # opcode library, typically ../opcodes, or they are in a header file
 286 # in INCLUDE_DIR.
 287 # Where is the "-lopcodes" library, with (some of) the opcode tables and
 288 # disassemblers?
 289 OPCODES_DIR = ../opcodes
 290 OPCODES_SRC = $(srcdir)/$(OPCODES_DIR)
 291 OPCODES = $(OPCODES_DIR)/libopcodes.a
 292 # Where are the other opcode tables which only have header file
 293 # versions?
 294 OP_INCLUDE = $(INCLUDE_DIR)/opcode
 295 OPCODES_CFLAGS = -I$(OP_INCLUDE)
 296
 297 # The simulator is usually nonexistent; targets that include one
 298 # should set this to list all the .o or .a files to be linked in.
 299 SIM = @SIM@
 300
 301 WIN32LIBS = @WIN32LIBS@
 302
 303 # Tcl et al cflags and libraries
 304 TCL = @TCL_LIBRARY@
 305 TCL_CFLAGS = @TCL_INCLUDE@
 306 GDBTKLIBS = @GDBTKLIBS@
 307 # Extra flags that the GDBTK files need:
 308 GDBTK_CFLAGS = @GDBTK_CFLAGS@
 309
 310 TK = @TK_LIBRARY@
 311 TK_CFLAGS = @TK_INCLUDE@
 312
 313 X11_CFLAGS = @TK_XINCLUDES@
 314 X11_LDFLAGS =
 315 X11_LIBS =
 316
 317 WIN32LDAPP = @WIN32LDAPP@
 318
 319 LIBGUI = @LIBGUI@
 320 GUI_CFLAGS_X = @GUI_CFLAGS_X@
 321 IDE_CFLAGS=$(GUI_CFLAGS_X) $(IDE_CFLAGS_X)
 322
 323 ALL_TCL_CFLAGS = $(TCL_CFLAGS) $(TK_CFLAGS)
 324
 325 # The version of gdbtk we're building. This should be kept
 326 # in sync with GDBTK_VERSION and friends in gdbtk.h.
 327 GDBTK_VERSION = 1.0
 328 GDBTK_LIBRARY = $(datadir)/insight$(GDBTK_VERSION)
 329
 330 # Gdbtk requires an absolute path to the source directory or
 331 # the testsuite won't run properly.
 332 GDBTK_SRC_DIR = @GDBTK_SRC_DIR@
 333
 334 SUBDIR_GDBTK_OBS = \
 335         gdbtk.o gdbtk-bp.o gdbtk-cmds.o gdbtk-hooks.o gdbtk-interp.o \
 336         gdbtk-register.o gdbtk-stack.o gdbtk-varobj.o gdbtk-wrapper.o
 337 SUBDIR_GDBTK_SRCS = \
 338         gdbtk/generic/gdbtk.c gdbtk/generic/gdbtk-bp.c \
 339         gdbtk/generic/gdbtk-cmds.c gdbtk/generic/gdbtk-hooks.c \
 340         gdbtk/generic/gdbtk-interp.c \
 341         gdbtk/generic/gdbtk-register.c gdbtk/generic/gdbtk-stack.c \
 342         gdbtk/generic/gdbtk-varobj.c gdbtk/generic/gdbtk-wrapper.c \
 343         gdbtk/generic/gdbtk-main.c
 344 SUBDIR_GDBTK_DEPS = $(LIBGUI) $(TCL_DEPS) $(TK_DEPS)
 345 SUBDIR_GDBTK_LDFLAGS=
 346 SUBDIR_GDBTK_CFLAGS= -DGDBTK
 347
 348 CONFIG_OBS= @CONFIG_OBS@
 349 CONFIG_SRCS= @CONFIG_SRCS@
 350 CONFIG_DEPS= @CONFIG_DEPS@
 351 CONFIG_LDFLAGS = @CONFIG_LDFLAGS@
 352 ENABLE_CFLAGS= @ENABLE_CFLAGS@
 353 CONFIG_ALL= @CONFIG_ALL@
 354 CONFIG_CLEAN= @CONFIG_CLEAN@
 355 CONFIG_INSTALL = @CONFIG_INSTALL@
 356 CONFIG_UNINSTALL = @CONFIG_UNINSTALL@
 357
 358 # -I. for config files.
 359 # -I$(srcdir) for gdb internal headers.
 360 # -I$(srcdir)/config for more generic config files.
 361
 362 # It is also possible that you will need to add -I/usr/include/sys if
 363 # your system doesn't have fcntl.h in /usr/include (which is where it
 364 # should be according to Posix).
 365 DEFS = @DEFS@
 366 GDB_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/common -I$(srcdir)/config \
 367         -DLOCALEDIR="\"$(localedir)\"" $(DEFS)
 368
 369 # MH_CFLAGS, if defined, has host-dependent CFLAGS from the config directory.
 370 GLOBAL_CFLAGS = $(MH_CFLAGS)
 371
 372 PROFILE_CFLAGS = @PROFILE_CFLAGS@
 373
 374 # CFLAGS is specifically reserved for setting from the command line
 375 # when running make.  I.E.  "make CFLAGS=-Wmissing-prototypes".
 376 CFLAGS = @CFLAGS@
 377
 378 # Set by configure, for e.g. expat.
 379 INTERNAL_CPPFLAGS = @CPPFLAGS@
 380
 381 # Need to pass this to testsuite for "make check".  Probably should be
 382 # consistent with top-level Makefile.in and gdb/testsuite/Makefile.in
 383 # so "make check" has the same result no matter where it is run.
 384 CXXFLAGS = -g -O
 385
 386 # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros.
 387 INTERNAL_CFLAGS_BASE = \
 388         $(CFLAGS) $(GLOBAL_CFLAGS) $(PROFILE_CFLAGS) \
 389         $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 390         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \
 391         $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS)
 392 INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS)
 393 INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS)
 394
 395 # LDFLAGS is specifically reserved for setting from the command line
 396 # when running make.
 397 LDFLAGS = @LDFLAGS@
 398
 399 # Profiling options need to go here to work.
 400 # I think it's perfectly reasonable for a user to set -pg in CFLAGS
 401 # and have it work; that's why CFLAGS is here.
 402 # PROFILE_CFLAGS is _not_ included, however, because we use monstartup.
 403 INTERNAL_LDFLAGS = $(CFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) $(LDFLAGS) $(CONFIG_LDFLAGS)
 404
 405 # If your system is missing alloca(), or, more likely, it's there but
 406 # it doesn't work, then refer to libiberty.
 407
 408 # Libraries and corresponding dependencies for compiling gdb.
 409 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 410 # LIBIBERTY appears twice on purpose.
 411 # If you have the Cygnus libraries installed,
 412 # you can use 'CLIBS=$(INSTALLED_LIBS)' 'CDEPS='
 413 INSTALLED_LIBS=-lbfd -lreadline -lopcodes -liberty -ldecnumber \
 414         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 415         -lintl -liberty $(LIBGNU)
 416 CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
 417         $(XM_CLIBS) $(NAT_CLIBS) $(GDBTKLIBS) @LIBS@ \
 418         $(LIBEXPAT) \
 419         $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU)
 420 CDEPS = $(XM_CDEPS) $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) \
 421         $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU)
 422
 423 ADD_FILES = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 424 ADD_DEPS = $(XM_ADD_FILES) $(TM_ADD_FILES) $(NAT_ADD_FILES)
 425
 426 DIST=gdb
 427
 428 LINT=/usr/5bin/lint
 429 LINTFLAGS= $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) \
 430         $(BFD_CFLAGS) $(INCLUDE_CFLAGS) \
 431         $(INTL_CFLAGS)
 432
 433 RUNTEST = runtest
 434 RUNTESTFLAGS=
 435
 436 # XML files to build in to GDB.
 437 XMLFILES = $(srcdir)/features/gdb-target.dtd $(srcdir)/features/xinclude.dtd \
 438         $(srcdir)/features/library-list.dtd $(srcdir)/features/osdata.dtd
 439
 440 # This is ser-unix.o for any system which supports a v7/BSD/SYSV/POSIX
 441 # interface to the serial port.  Hopefully if get ported to OS/2, VMS,
 442 # etc., then there will be (as part of the C library or perhaps as
 443 # part of libiberty) a POSIX interface.  But at least for now the
 444 # host-dependent makefile fragment might need to use something else
 445 # besides ser-unix.o
 446 SER_HARDWIRE = @SER_HARDWIRE@
 447
 448 # The `remote' debugging target is supported for most architectures,
 449 # but not all (e.g. 960)
 450 REMOTE_OBS = remote.o dcache.o tracepoint.o ax-general.o ax-gdb.o remote-fileio.o
 451
 452 # This is remote-sim.o if a simulator is to be linked in.
 453 SIM_OBS = @SIM_OBS@
 454
 455 # Target-dependent object files.
 456 TARGET_OBS = @TARGET_OBS@
 457
 458 # All target-dependent objects files that require 64-bit CORE_ADDR
 459 # (used with --enable-targets=all --enable-64-bit-bfd).
 460 ALL_64_TARGET_OBS = \
 461         alphabsd-tdep.o alphafbsd-tdep.o alpha-linux-tdep.o alpha-mdebug-tdep.o \
 462         alphanbsd-tdep.o alphaobsd-tdep.o alpha-osf1-tdep.o alpha-tdep.o \
 463         amd64fbsd-tdep.o amd64-dicos-tdep.o amd64-linux-tdep.o amd64nbsd-tdep.o \
 464         amd64obsd-tdep.o amd64-sol2-tdep.o amd64-tdep.o \
 465         ia64-linux-tdep.o ia64-tdep.o \
 466         mips64obsd-tdep.o \
 467         sparc64fbsd-tdep.o sparc64-linux-tdep.o sparc64nbsd-tdep.o \
 468         sparc64obsd-tdep.o sparc64-sol2-tdep.o sparc64-tdep.o
 469
 470 # All other target-dependent objects files (used with --enable-targets=all).
 471 ALL_TARGET_OBS = \
 472         armbsd-tdep.o arm-linux-tdep.o armnbsd-tdep.o armobsd-tdep.o \
 473         arm-tdep.o arm-wince-tdep.o \
 474         avr-tdep.o \
 475         cris-tdep.o \
 476         dicos-tdep.o \
 477         frv-linux-tdep.o frv-tdep.o \
 478         h8300-tdep.o \
 479         hppabsd-tdep.o hppanbsd-tdep.o hppaobsd-tdep.o \
 480         hppa-hpux-tdep.o hppa-linux-tdep.o hppa-tdep.o \
 481         i386bsd-tdep.o i386-cygwin-tdep.o i386fbsd-tdep.o i386gnu-tdep.o \
 482         i386-linux-tdep.o i386nbsd-tdep.o i386-nto-tdep.o i386obsd-tdep.o \
 483         i386-sol2-tdep.o i386-tdep.o i387-tdep.o \
 484         i386-dicos-tdep.o \
 485         iq2000-tdep.o \
 486         linux-tdep.o \
 487         m32c-tdep.o \
 488         m32r-linux-tdep.o m32r-tdep.o \
 489         m68hc11-tdep.o \
 490         m68kbsd-tdep.o m68klinux-tdep.o m68k-tdep.o \
 491         m88k-tdep.o \
 492         mep-tdep.o \
 493         mips-irix-tdep.o mips-linux-tdep.o \
 494         mipsnbsd-tdep.o mips-tdep.o \
 495         mn10300-linux-tdep.o mn10300-tdep.o \
 496         mt-tdep.o \
 497         nto-tdep.o \
 498         ppc-linux-tdep.o ppcnbsd-tdep.o ppcobsd-tdep.o ppc-sysv-tdep.o \
 499         rs6000-aix-tdep.o rs6000-tdep.o \
 500         s390-tdep.o \
 501         score-tdep.o \
 502         sh64-tdep.o sh-linux-tdep.o shnbsd-tdep.o sh-tdep.o \
 503         sparc-linux-tdep.o sparcnbsd-tdep.o sparcobsd-tdep.o \
 504         sparc-sol2-tdep.o sparc-tdep.o \
 505         spu-tdep.o \
 506         v850-tdep.o \
 507         vaxnbsd-tdep.o vaxobsd-tdep.o vax-tdep.o \
 508         xstormy16-tdep.o \
 509         xtensa-config.o xtensa-tdep.o xtensa-linux-tdep.o \
 510         glibc-tdep.o \
 511         bsd-uthread.o \
 512         nbsd-tdep.o obsd-tdep.o \
 513         sol2-tdep.o \
 514         solib.o solib-frv.o solib-irix.o solib-svr4.o solib-target.o \
 515         solib-som.o solib-pa64.o \
 516         dbug-rom.o dink32-rom.o ppcbug-rom.o m32r-rom.o dsrec.o monitor.o \
 517         remote-m32r-sdi.o \
 518         xcoffread.o \
 519         prologue-value.o \
 520         symfile-mem.o \
 521         corelow.o \
 522         windows-tdep.o
 523
 524 # Host-dependent makefile fragment comes in here.
 525 @host_makefile_frag@
 526 # End of host-dependent makefile fragment
 527
 528 FLAGS_TO_PASS = \
 529         "prefix=$(prefix)" \
 530         "exec_prefix=$(exec_prefix)" \
 531         "infodir=$(infodir)" \
 532         "datarootdir=$(datarootdir)" \
 533         "docdir=$(docdir)" \
 534         "htmldir=$(htmldir)" \
 535         "pdfdir=$(pdfdir)" \
 536         "libdir=$(libdir)" \
 537         "mandir=$(mandir)" \
 538         "datadir=$(datadir)" \
 539         "includedir=$(includedir)" \
 540         "against=$(against)" \
 541         "DESTDIR=$(DESTDIR)" \
 542         "AR=$(AR)" \
 543         "AR_FLAGS=$(AR_FLAGS)" \
 544         "CC=$(CC)" \
 545         "CFLAGS=$(CFLAGS)" \
 546         "CXX=$(CXX)" \
 547         "CXXFLAGS=$(CXXFLAGS)" \
 548         "DLLTOOL=$(DLLTOOL)" \
 549         "LDFLAGS=$(LDFLAGS)" \
 550         "RANLIB=$(RANLIB)" \
 551         "MAKEINFO=$(MAKEINFO)" \
 552         "MAKEHTML=$(MAKEHTML)" \
 553         "MAKEHTMLFLAGS=$(MAKEHTMLFLAGS)" \
 554         "INSTALL=$(INSTALL)" \
 555         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 556         "INSTALL_DATA=$(INSTALL_DATA)" \
 557         "RUNTEST=$(RUNTEST)" \
 558         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 559
 560 # Flags that we pass when building the testsuite.
 561
 562 # empty for native, $(target_alias)/ for cross
 563 target_subdir = @target_subdir@
 564
 565 CC_FOR_TARGET = ` \
 566   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 567     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 568       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 569     else \
 570       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 571     fi; \
 572   else \
 573     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 574       echo $(CC); \
 575     else \
 576       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 577     fi; \
 578   fi`
 579
 580 CXX = gcc
 581 CXX_FOR_TARGET = ` \
 582   if [ -f $${rootme}/../gcc/xgcc ] ; then \
 583     if [ -f $${rootme}/../$(target_subdir)newlib/Makefile ] ; then \
 584       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/ -idirafter $${rootme}/$(target_subdir)newlib/targ-include -idirafter $${rootsrc}/../$(target_subdir)newlib/libc/include -nostdinc -B$${rootme}/../$(target_subdir)newlib/; \
 585     else \
 586       echo $${rootme}/../gcc/xgcc -B$${rootme}/../gcc/; \
 587     fi; \
 588   else \
 589     if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
 590       echo $(CXX); \
 591     else \
 592       t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
 593     fi; \
 594   fi`
 595
 596 # The use of $$(x_FOR_TARGET) reduces the command line length by not
 597 # duplicating the lengthy definition.
 598 TARGET_FLAGS_TO_PASS = \
 599         "prefix=$(prefix)" \
 600         "exec_prefix=$(exec_prefix)" \
 601         "against=$(against)" \
 602         'CC=$$(CC_FOR_TARGET)' \
 603         "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
 604         "CFLAGS=$(CFLAGS)" \
 605         'CXX=$$(CXX_FOR_TARGET)' \
 606         "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
 607         "CXXFLAGS=$(CXXFLAGS)" \
 608         "INSTALL=$(INSTALL)" \
 609         "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
 610         "INSTALL_DATA=$(INSTALL_DATA)" \
 611         "MAKEINFO=$(MAKEINFO)" \
 612         "MAKEHTML=$(MAKEHTML)" \
 613         "RUNTEST=$(RUNTEST)" \
 614         "RUNTESTFLAGS=$(RUNTESTFLAGS)"
 615
 616 # All source files that go into linking GDB.
 617 # Links made at configuration time should not be specified here, since
 618 # SFILES is used in building the distribution archive.
 619
 620 SFILES = ada-exp.y ada-lang.c ada-typeprint.c ada-valprint.c ada-tasks.c \
 621         addrmap.c \
 622         auxv.c ax-general.c ax-gdb.c \
 623         bcache.c \
 624         bfd-target.c \
 625         block.c blockframe.c breakpoint.c buildsym.c \
 626         c-exp.y c-lang.c c-typeprint.c c-valprint.c \
 627         charset.c cli-out.c coffread.c coff-pe-read.c \
 628         complaints.c completer.c corefile.c \
 629         cp-abi.c cp-support.c cp-namespace.c cp-valprint.c \
 630         cp-name-parser.y \
 631         dbxread.c demangle.c dictionary.c disasm.c doublest.c dummy-frame.c \
 632         dwarf2expr.c dwarf2loc.c dwarf2read.c dwarf2-frame.c \
 633         elfread.c environ.c eval.c event-loop.c event-top.c expprint.c \
 634         f-exp.y f-lang.c f-typeprint.c f-valprint.c findcmd.c findvar.c \
 635         frame.c frame-base.c frame-unwind.c \
 636         gdbarch.c arch-utils.c gdbtypes.c gnu-v2-abi.c gnu-v3-abi.c \
 637         inf-loop.c \
 638         infcall.c \
 639         infcmd.c inflow.c infrun.c \
 640         interps.c \
 641         jv-exp.y jv-lang.c jv-valprint.c jv-typeprint.c \
 642         language.c linespec.c \
 643         m2-exp.y m2-lang.c m2-typeprint.c m2-valprint.c \
 644         macrotab.c macroexp.c macrocmd.c macroscope.c main.c maint.c \
 645         mdebugread.c memattr.c mem-break.c minsyms.c mipsread.c memory-map.c \
 646         objc-exp.y objc-lang.c \
 647         objfiles.c osabi.c observer.c osdata.c \
 648         p-exp.y p-lang.c p-typeprint.c p-valprint.c parse.c printcmd.c \
 649         prologue-value.c \
 650         regcache.c reggroups.c remote.c remote-fileio.c reverse.c \
 651         scm-exp.c scm-lang.c scm-valprint.c \
 652         sentinel-frame.c \
 653         serial.c ser-base.c ser-unix.c \
 654         solib.c solib-null.c source.c \
 655         stabsread.c stack.c std-regs.c symfile.c symfile-mem.c symmisc.c \
 656         symtab.c \
 657         target.c target-descriptions.c target-memory.c \
 658         thread.c top.c tracepoint.c \
 659         trad-frame.c \
 660         tramp-frame.c \
 661         typeprint.c \
 662         ui-out.c utils.c ui-file.h ui-file.c \
 663         user-regs.c \
 664         valarith.c valops.c valprint.c value.c varobj.c vec.c \
 665         wrapper.c \
 666         xml-tdesc.c xml-support.c \
 667         inferior.c gdb_usleep.c
 668
 669 LINTFILES = $(SFILES) $(YYFILES) $(CONFIG_SRCS) init.c
 670
 671 # Header files that need to have srcdir added.  Note that in the cases
 672 # where we use a macro like $(gdbcmd_h), things are carefully arranged
 673 # so that each .h file is listed exactly once (M-x tags-search works
 674 # wrong if TAGS has files twice).  Because this is tricky to get
 675 # right, it is probably easiest just to list .h files here directly.
 676
 677 HFILES_NO_SRCDIR = osf-share/cma_debug_client.h \
 678 osf-share/HP800/cma_thread_io.h osf-share/cma_sequence.h \
 679 osf-share/cma_mutex.h osf-share/cma_semaphore_defs.h \
 680 osf-share/cma_list.h osf-share/cma_handle.h osf-share/cma_stack.h \
 681 osf-share/cma_util.h osf-share/RIOS/cma_thread_io.h \
 682 osf-share/cma_errors.h osf-share/cma_tcb_defs.h osf-share/cma_attr.h \
 683 osf-share/cma_stack_int.h osf-share/cma_init.h \
 684 osf-share/cma_deb_core.h osf-share/AT386/cma_thread_io.h \
 685 osf-share/cma_sched.h proc-utils.h arm-tdep.h ax-gdb.h ppcnbsd-tdep.h \
 686 cli-out.h gdb_expat.h breakpoint.h infcall.h obsd-tdep.h gnu-v2-abi.h \
 687 exec.h m32r-tdep.h osabi.h gdbcore.h solib-som.h \
 688 i386bsd-nat.h xml-support.h xml-tdesc.h alphabsd-tdep.h gdb_obstack.h \
 689 ia64-tdep.h ada-lang.h varobj.h frv-tdep.h nto-tdep.h serial.h \
 690 c-lang.h frame.h event-loop.h block.h cli/cli-setshow.h \
 691 cli/cli-decode.h cli/cli-cmds.h cli/cli-dump.h \
 692 cli/cli-script.h macrotab.h symtab.h version.h gnulib/wchar.in.h \
 693 gnulib/string.in.h gnulib/str-two-way.h gnulib/extra/link-warning.h \
 694 gnulib/stdint.in.h remote.h gdb.h sparc-nat.h gdbserver/win32-low.h \
 695 gdbserver/i387-fp.h gdbserver/server.h gdbserver/terminal.h \
 696 gdbserver/mem-break.h gdbserver/wincecompat.h gdbserver/target.h \
 697 gdbserver/linux-low.h gdbserver/gdb_proc_service.h \
 698 gdbserver/regcache.h gdbthread.h dwarf2-frame.h nbsd-nat.h dcache.h \
 699 amd64-nat.h s390-tdep.h arm-linux-tdep.h exceptions.h macroscope.h \
 700 gdbarch.h bsd-uthread.h gdb_thread_db.h gdb_stat.h memory-map.h \
 701 mdebugread.h m88k-tdep.h stabsread.h hppa-linux-offsets.h linux-fork.h \
 702 ser-unix.h scm-lang.h inf-ptrace.h terminal.h ui-out.h frame-base.h \
 703 f-lang.h dwarf2loc.h value.h sparc-tdep.h defs.h target-descriptions.h \
 704 objfiles.h vec.h disasm.h mips-tdep.h ser-base.h \
 705 gdb_curses.h bfd-target.h memattr.h inferior.h ax.h dummy-frame.h \
 706 inflow.h fbsd-nat.h libunwind-frame.h completer.h inf-ttrace.h \
 707 solib-target.h shnbsd-tdep.h gdb_vfork.h alpha-tdep.h dwarf2expr.h \
 708 m2-lang.h stack.h charset.h addrmap.h command.h solist.h source.h \
 709 target.h prologue-value.h cp-abi.h tui/tui-hooks.h tui/tui.h \
 710 tui/tui-file.h tui/tui-command.h tui/tui-disasm.h tui/tui-wingeneral.h \
 711 tui/tui-windata.h tui/tui-data.h tui/tui-win.h tui/tui-stack.h \
 712 tui/tui-winsource.h tui/tui-regs.h tui/tui-io.h tui/tui-layout.h \
 713 tui/tui-source.h xcoffsolib.h sol2-tdep.h gregset.h sh-tdep.h \
 714 expression.h score-tdep.h gdb_select.h ser-tcp.h buildsym.h valprint.h \
 715 call-cmds.h typeprint.h mi/mi-getopt.h mi/mi-parse.h mi/mi-console.h \
 716 mi/mi-out.h mi/mi-main.h mi/mi-common.h mi/mi-cmds.h linux-nat.h \
 717 complaints.h gdb_proc_service.h gdb_regex.h xtensa-tdep.h inf-loop.h \
 718 gdb_wait.h gdb_assert.h solib.h ppc-tdep.h cp-support.h glibc-tdep.h \
 719 interps.h auxv.h gdbcmd.h tramp-frame.h mipsnbsd-tdep.h \
 720 amd64-linux-tdep.h linespec.h i387-tdep.h mn10300-tdep.h \
 721 sparc64-tdep.h monitor.h ppcobsd-tdep.h srec.h solib-pa64.h \
 722 coff-pe-read.h parser-defs.h gdb_ptrace.h mips-linux-tdep.h \
 723 m68k-tdep.h spu-tdep.h jv-lang.h environ.h solib-irix.h amd64-tdep.h \
 724 doublest.h regset.h hppa-tdep.h ppc-linux-tdep.h rs6000-tdep.h \
 725 gdb_locale.h gdb_dirent.h arch-utils.h trad-frame.h gnu-nat.h \
 726 language.h nbsd-tdep.h wrapper.h solib-svr4.h \
 727 macroexp.h ui-file.h regcache.h gdb_string.h tracepoint.h i386-tdep.h \
 728 inf-child.h p-lang.h event-top.h gdbtypes.h scm-tags.h user-regs.h \
 729 regformats/regdef.h config/alpha/nm-osf3.h config/i386/nm-cygwin.h \
 730 config/i386/nm-linux64.h config/i386/nm-i386gnu.h \
 731 config/i386/nm-fbsd.h config/i386/nm-i386sol2.h config/i386/nm-linux.h \
 732 config/i386/nm-i386.h config/i386/nm-go32.h config/nm-nto.h \
 733 config/sparc/nm-sol2.h config/nm-linux.h config/mips/nm-irix5.h \
 734 config/rs6000/nm-rs6000.h top.h bsd-kvm.h gdb-stabs.h reggroups.h \
 735 annotate.h sim-regno.h dictionary.h dfp.h main.h frame-unwind.h \
 736 remote-fileio.h i386-linux-tdep.h vax-tdep.h objc-lang.h \
 737 sentinel-frame.h bcache.h symfile.h windows-tdep.h linux-tdep.h \
 738 gdb_usleep.h
 739
 740 # Header files that already have srcdir in them, or which are in objdir.
 741
 742 HFILES_WITH_SRCDIR = ../bfd/bfd.h
 743
 744
 745 # GDB "info" files, which should be included in their entirety
 746 INFOFILES = gdb.info*
 747
 748 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c sparc-stub.c rem-multi.shar
 749
 750 # {X,T,NAT}DEPFILES are something of a pain in that it's hard to
 751 # default their values the way we do for SER_HARDWIRE; in the future
 752 # maybe much of the stuff now in {X,T,NAT}DEPFILES will go into other
 753 # variables analogous to SER_HARDWIRE which get defaulted in this
 754 # Makefile.in
 755
 756 DEPFILES = $(TARGET_OBS) $(SER_HARDWIRE) $(NATDEPFILES) \
 757            $(REMOTE_OBS) $(SIM_OBS)
 758
 759 SOURCES = $(SFILES) $(ALLDEPFILES) $(YYFILES) $(CONFIG_SRCS)
 760 # Don't include YYFILES (*.c) because we already include *.y in SFILES,
 761 # and it's more useful to see it in the .y file.
 762 TAGFILES_NO_SRCDIR = $(SFILES) $(HFILES_NO_SRCDIR) $(ALLDEPFILES) \
 763         $(CONFIG_SRCS)
 764 TAGFILES_WITH_SRCDIR = $(HFILES_WITH_SRCDIR)
 765
 766 COMMON_OBS = $(DEPFILES) $(CONFIG_OBS) $(YYOBJ) \
 767         version.o \
 768         annotate.o \
 769         addrmap.o \
 770         auxv.o \
 771         bfd-target.o \
 772         blockframe.o breakpoint.o findvar.o regcache.o \
 773         charset.o disasm.o dummy-frame.o dfp.o \
 774         source.o value.o eval.o valops.o valarith.o valprint.o printcmd.o \
 775         block.o symtab.o symfile.o symmisc.o linespec.o dictionary.o \
 776         infcall.o \
 777         infcmd.o infrun.o \
 778         expprint.o environ.o stack.o thread.o \
 779         exceptions.o \
 780         inf-child.o \
 781         interps.o \
 782         main.o \
 783         macrotab.o macrocmd.o macroexp.o macroscope.o \
 784         event-loop.o event-top.o inf-loop.o completer.o \
 785         gdbarch.o arch-utils.o gdbtypes.o osabi.o copying.o \
 786         memattr.o mem-break.o target.o parse.o language.o buildsym.o \
 787         findcmd.o \
 788         std-regs.o \
 789         signals.o \
 790         exec.o reverse.o \
 791         bcache.o objfiles.o observer.o minsyms.o maint.o demangle.o \
 792         dbxread.o coffread.o coff-pe-read.o \
 793         dwarf2read.o mipsread.o stabsread.o corefile.o \
 794         dwarf2expr.o dwarf2loc.o dwarf2-frame.o \
 795         ada-lang.o c-lang.o f-lang.o objc-lang.o \
 796         ada-tasks.o \
 797         ui-out.o cli-out.o \
 798         varobj.o vec.o wrapper.o \
 799         jv-lang.o jv-valprint.o jv-typeprint.o \
 800         m2-lang.o p-lang.o p-typeprint.o p-valprint.o \
 801         scm-exp.o scm-lang.o scm-valprint.o \
 802         sentinel-frame.o \
 803         complaints.o typeprint.o \
 804         ada-typeprint.o c-typeprint.o f-typeprint.o m2-typeprint.o \
 805         ada-valprint.o c-valprint.o cp-valprint.o f-valprint.o m2-valprint.o \
 806         serial.o mdebugread.o top.o utils.o \
 807         ui-file.o \
 808         user-regs.o \
 809         frame.o frame-unwind.o doublest.o \
 810         frame-base.o \
 811         gnu-v2-abi.o gnu-v3-abi.o cp-abi.o cp-support.o \
 812         cp-namespace.o \
 813         reggroups.o regset.o \
 814         trad-frame.o \
 815         tramp-frame.o \
 816         solib.o solib-null.o \
 817         prologue-value.o memory-map.o xml-support.o \
 818         target-descriptions.o target-memory.o xml-tdesc.o xml-builtin.o \
 819         inferior.o osdata.o gdb_usleep.o
 820
 821 TSOBS = inflow.o
 822
 823 SUBDIRS = @subdirs@
 824 CLEANDIRS = $(SUBDIRS) gnulib
 825
 826 # For now, shortcut the "configure GDB for fewer languages" stuff.
 827 YYFILES = c-exp.c \
 828         cp-name-parser.c \
 829         objc-exp.c \
 830         ada-lex.c \
 831         ada-exp.c \
 832         jv-exp.c \
 833         f-exp.c m2-exp.c p-exp.c
 834 YYOBJ = c-exp.o \
 835         cp-name-parser.o \
 836         objc-exp.o \
 837         ada-exp.o \
 838         jv-exp.o \
 839         f-exp.o m2-exp.o p-exp.o
 840
 841 # Things which need to be built when making a distribution.
 842
 843 DISTSTUFF = $(YYFILES)
 844
 845
 846 # All generated files which can be included by another file.
 847 generated_files = config.h observer.h observer.inc ada-lex.c \
 848         $(GNULIB_H) $(NAT_GENERATED_FILES)
 849
 850 .c.o:
 851         $(COMPILE) $<
 852         $(POSTCOMPILE)
 853
 854 all: gdb$(EXEEXT) $(CONFIG_ALL)
 855         @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do
 856 .PHONY: all-tui
 857 all-tui: $(TUI)$(EXEEXT)
 858
 859 installcheck:
 860
 861 # The check target can not use subdir_do, because subdir_do does not
 862 # use TARGET_FLAGS_TO_PASS.
 863 check: force
 864         @if [ -f testsuite/Makefile ]; then \
 865           rootme=`pwd`; export rootme; \
 866           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 867           cd testsuite; \
 868           $(MAKE) $(TARGET_FLAGS_TO_PASS) check; \
 869         else true; fi
 870
 871 # The idea is to parallelize testing of multilibs, for example:
 872 #   make -j3 check//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu}
 873 # will run 3 concurrent sessions of check, eventually testing all 10
 874 # combinations.  GNU make is required for the % pattern to work, as is
 875 # a shell that expands alternations within braces.  If GNU make is not
 876 # used, this rule will harmlessly fail to match.
 877 check//%: force
 878         @if [ -f testsuite/config.status ]; then \
 879           rootme=`pwd`; export rootme; \
 880           rootsrc=`cd $(srcdir); pwd`; export rootsrc; \
 881           target=`echo "$@" | sed 's,//.*,,'`; \
 882           variant=`echo "$@" | sed 's,^[^/]*//,,'`; \
 883           vardots=`echo "$$variant" | sed 's,/,.,g'`; \
 884           testdir=testsuite.$$vardots; \
 885           if [ ! -f $$testdir/Makefile ]; then \
 886             (cd testsuite && find . -name config.status) | \
 887             sed s,/config.status$$,, | sort | while read subdir; do \
 888               $(SHELL) $(srcdir)/../mkinstalldirs $$testdir/$$subdir && \
 889               (cd $$testdir/$$subdir && \
 890                $(SHELL) $$rootme/testsuite/$$subdir/config.status \
 891                  --recheck && \
 892                $(SHELL) ./config.status); done; \
 893           else :; fi && cd $$testdir && \
 894           $(MAKE) $(TARGET_FLAGS_TO_PASS) \
 895             RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \
 896             "$$target"; \
 897         else true; fi
 898
 899 info install-info clean-info dvi pdf install-pdf html install-html: force
 900         @$(MAKE) $(FLAGS_TO_PASS) DO=$@ "DODIRS=$(SUBDIRS)" subdir_do
 901
 902 gdb.z:gdb.1
 903         nroff -man $(srcdir)/gdb.1 | col -b > gdb.t
 904         pack gdb.t ; rm -f gdb.t
 905         mv gdb.t.z gdb.z
 906
 907 # Traditionally "install" depends on "all".  But it may be useful
 908 # not to; for example, if the user has made some trivial change to a
 909 # source file and doesn't care about rebuilding or just wants to save the
 910 # time it takes for make to check that all is up to date.
 911 # install-only is intended to address that need.
 912 install: all install-only
 913 install-only: $(CONFIG_INSTALL)
 914         transformed_name=`t='$(program_transform_name)'; \
 915                           echo gdb | sed -e "$$t"` ; \
 916                 if test "x$$transformed_name" = x; then \
 917                   transformed_name=gdb ; \
 918                 else \
 919                   true ; \
 920                 fi ; \
 921                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
 922                 $(INSTALL_PROGRAM) gdb$(EXEEXT) \
 923                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
 924                 $(SHELL) $(srcdir)/../mkinstalldirs \
 925                         $(DESTDIR)$(man1dir) ; \
 926                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
 927                         $(DESTDIR)$(man1dir)/$$transformed_name.1
 928         @$(MAKE) DO=install "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
 929 .PHONY: install-tui
 930 install-tui:
 931         transformed_name=`t='$(program_transform_name)'; \
 932                           echo $(TUI) | sed -e "$$t"` ; \
 933                 if test "x$$transformed_name" = x; then \
 934                   transformed_name=$(TUI) ; \
 935                 else \
 936                   true ; \
 937                 fi ; \
 938                 $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir) ; \
 939                 $(INSTALL_PROGRAM) $(TUI)$(EXEEXT) \
 940                         $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
 941                 $(SHELL) $(srcdir)/../mkinstalldirs \
 942                         $(DESTDIR)$(man1dir) ; \
 943                 $(INSTALL_DATA) $(srcdir)/gdb.1 \
 944                         $(DESTDIR)$(man1dir)/$$transformed_name.1
 945
 946
 947 uninstall: force $(CONFIG_UNINSTALL)
 948         transformed_name=`t='$(program_transform_name)'; \
 949                           echo gdb | sed -e $$t` ; \
 950                 if test "x$$transformed_name" = x; then \
 951                   transformed_name=gdb ; \
 952                 else \
 953                   true ; \
 954                 fi ; \
 955                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
 956                       $(DESTDIR)$(man1dir)/$$transformed_name.1
 957         @$(MAKE) DO=uninstall "DODIRS=$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do
 958 .PHONY: uninstall-tui
 959 uninstall-tui:
 960         transformed_name=`t='$(program_transform_name)'; \
 961                           echo $(TUI) | sed -e $$t` ; \
 962                 if test "x$$transformed_name" = x; then \
 963                   transformed_name=$(TUI) ; \
 964                 else \
 965                   true ; \
 966                 fi ; \
 967                 rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) \
 968                       $(DESTDIR)$(man1dir)/$$transformed_name.1
 969
 970 # The C++ name parser can be built standalone for testing.
 971 test-cp-name-parser.o: cp-name-parser.c
 972         $(COMPILE) -DTEST_CPNAMES cp-name-parser.c
 973         $(POSTCOMPILE)
 974
 975 test-cp-name-parser$(EXEEXT): test-cp-name-parser.o $(LIBIBERTY)
 976         $(CC_LD) $(INTERNAL_LDFLAGS) -o test-cp-name-parser$(EXEEXT) \
 977                 test-cp-name-parser.o $(LIBIBERTY)
 978
 979 # We do this by grepping through sources.  If that turns out to be too slow,
 980 # maybe we could just require every .o file to have an initialization routine
 981 # of a given name (top.o -> _initialize_top, etc.).
 982 #
 983 # Formatting conventions:  The name of the _initialize_* routines must start
 984 # in column zero, and must not be inside #if.
 985 #
 986 # Note that the set of files with init functions might change, or the names
 987 # of the functions might change, so this files needs to depend on all the
 988 # object files that will be linked into gdb.
 989
 990 # FIXME: There is a problem with this approach - init.c may force
 991 # unnecessary files to be linked in.
 992
 993 # FIXME: cagney/2002-06-09: gdb/564: gdb/563: Force the order so that
 994 # the first call is to _initialize_gdbtypes (implemented by explicitly
 995 # putting that function's name first in the init.l-tmp file).  This is
 996 # a hack to ensure that all the architecture dependant global
 997 # builtin_type_* variables are initialized before anything else
 998 # (per-architecture code is called in the same order that it is
 999 # registered).  The ``correct fix'' is to have all the builtin types
1000 # made part of the architecture and initialize them on-demand (using
1001 # gdbarch_data) just like everything else.  The catch is that other
1002 # modules still take the address of these builtin types forcing them
1003 # to be variables, sigh!
1004
1005 # NOTE: cagney/2003-03-18: The sed pattern ``s|^\([^ /]...'' is
1006 # anchored on the first column and excludes the ``/'' character so
1007 # that it doesn't add the $(srcdir) prefix to any file that already
1008 # has an absolute path.  It turns out that $(DEC)'s True64 make
1009 # automatically adds the $(srcdir) prefixes when it encounters files
1010 # in sub-directories such as cli/ and mi/.
1011
1012 # NOTE: cagney/2004-02-08: The ``case "$$fs" in'' eliminates
1013 # duplicates.  Files in the gdb/ directory can end up appearing in
1014 # COMMON_OBS (as a .o file) and CONFIG_SRCS (as a .c file).
1015
1016 INIT_FILES = $(COMMON_OBS) $(TSOBS) $(CONFIG_SRCS)
1017 init.c: $(INIT_FILES)
1018         @echo Making init.c
1019         @rm -f init.c-tmp init.l-tmp
1020         @touch init.c-tmp
1021         @echo gdbtypes > init.l-tmp
1022         @-LANG=C ; export LANG ; \
1023         LC_ALL=C ; export LC_ALL ; \
1024         echo $(INIT_FILES) | \
1025         tr ' ' '\012' | \
1026         sed \
1027             -e '/^gdbtypes.[co]$$/d' \
1028             -e '/^init.[co]$$/d' \
1029             -e '/xdr_ld.[co]$$/d' \
1030             -e '/xdr_ptrace.[co]$$/d' \
1031             -e '/xdr_rdb.[co]$$/d' \
1032             -e '/udr.[co]$$/d' \
1033             -e '/udip2soc.[co]$$/d' \
1034             -e '/udi2go32.[co]$$/d' \
1035             -e '/version.[co]$$/d' \
1036             -e '/^[a-z0-9A-Z_]*_[SU].[co]$$/d' \
1037             -e '/[a-z0-9A-Z_]*-exp.tab.[co]$$/d' \
1038             -e 's/\.[co]$$/.c/' \
1039             -e 's,signals\.c,common/signals\.c,' \
1040             -e 's|^\([^  /][^     ]*\)|$(srcdir)/\1|g' | \
1041         while read f; do \
1042             sed -n -e 's/^_initialize_\([a-z_0-9A-Z]*\).*/\1/p' $$f 2>/dev/null; \
1043         done | \
1044         while read f; do \
1045             case " $$fs " in \
1046                 *" $$f "* ) ;; \
1047                 * ) echo $$f ; fs="$$fs $$f";; \
1048             esac; \
1049         done >> init.l-tmp
1050         @echo '/* Do not modify this file.  */' >>init.c-tmp
1051         @echo '/* It is created automatically by the Makefile.  */'>>init.c-tmp
1052         @echo '#include "defs.h"      /* For initialize_file_ftype.  */' >>init.c-tmp
1053         @echo '#include "call-cmds.h" /* For initialize_all_files.  */' >>init.c-tmp
1054         @sed -e 's/\(.*\)/extern initialize_file_ftype _initialize_\1;/' <init.l-tmp >>init.c-tmp
1055         @echo 'void' >>init.c-tmp
1056         @echo 'initialize_all_files (void)' >>init.c-tmp
1057         @echo '{' >>init.c-tmp
1058         @sed -e 's/\(.*\)/  _initialize_\1 ();/' <init.l-tmp >>init.c-tmp
1059         @echo '}' >>init.c-tmp
1060         @rm init.l-tmp
1061         @mv init.c-tmp init.c
1062
1063 .PRECIOUS: init.c
1064
1065 # Removing the old gdb first works better if it is running, at least on SunOS.
1066 gdb$(EXEEXT): gdb.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1067         rm -f gdb$(EXEEXT)
1068         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1069                 -o gdb$(EXEEXT) gdb.o libgdb.a \
1070                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1071
1072 $(TUI)$(EXEEXT): tui-main.o libgdb.a $(ADD_DEPS) $(CDEPS) $(TDEPLIBS)
1073         rm -f $(TUI)$(EXEEXT)
1074         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1075                 -o $(TUI)$(EXEEXT) tui-main.o libgdb.a \
1076                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1077
1078 # Convenience rule to handle recursion.
1079 $(LIBGNU) $(GNULIB_H): all-lib
1080 all-lib: gnulib/Makefile
1081         @$(MAKE) $(FLAGS_TO_PASS) DO=all DODIRS=gnulib subdir_do
1082 .PHONY: all-lib
1083
1084 # Create a library of the gdb object files and build GDB by linking
1085 # against that.
1086 #
1087 # init.o is very important.  It pulls in the rest of GDB.
1088 LIBGDB_OBS= $(COMMON_OBS) $(TSOBS) $(ADD_FILES) init.o
1089 libgdb.a: $(LIBGDB_OBS)
1090         -rm -f libgdb.a
1091         $(AR) q libgdb.a $(LIBGDB_OBS)
1092         $(RANLIB) libgdb.a
1093
1094 # This is useful when debugging GDB, because some Unix's don't let you run GDB
1095 # on itself without copying the executable.  So "make gdb1" will make
1096 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
1097 # Removing gdb1 before the copy is the right thing if gdb1 is open
1098 # in another process.
1099 gdb1$(EXEEXT): gdb$(EXEEXT)
1100         rm -f gdb1$(EXEEXT)
1101         cp gdb$(EXEEXT) gdb1$(EXEEXT)
1102
1103 # Put the proper machine-specific files first, so M-. on a machine
1104 # specific routine gets the one for the correct machine.  (FIXME: those
1105 # files go in twice; we should be removing them from the main list).
1106
1107 # TAGS depends on all the files that go into it so you can rebuild TAGS
1108 # with `make TAGS' and not have to say `rm TAGS' first.
1109
1110 GDB_NM_FILE = @GDB_NM_FILE@
1111 TAGS: $(DEPFILES) $(TAGFILES_NO_SRCDIR) $(TAGFILES_WITH_SRCDIR)
1112         @echo Making TAGS
1113         @etags $(srcdir)/$(GDB_NM_FILE) \
1114         `(for i in $(DEPFILES) $(TAGFILES_NO_SRCDIR); do \
1115                 echo $(srcdir)/$$i ; \
1116         done ; for i in $(TAGFILES_WITH_SRCDIR); do \
1117                 echo $$i ; \
1118         done) | sed -e 's/\.o$$/\.c/'` \
1119         `find $(srcdir)/config -name '*.h' -print`
1120
1121 tags: TAGS
1122
1123 clean mostlyclean: $(CONFIG_CLEAN)
1124         @$(MAKE) $(FLAGS_TO_PASS) DO=clean "DODIRS=$(CLEANDIRS)" subdir_do
1125         rm -f *.o *.a $(ADD_FILES) *~ init.c-tmp init.l-tmp version.c-tmp
1126         rm -f init.c version.c
1127         rm -f gdb$(EXEEXT) core make.log
1128         rm -f gdb[0-9]$(EXEEXT)
1129         rm -f test-cp-name-parser$(EXEEXT)
1130         rm -f xml-builtin.c stamp-xml
1131         rm -f $(DEPDIR)/*
1132
1133 .PHONY: clean-tui
1134 clean-tui:
1135         rm -f $(TUI)$(EXEEXT)
1136
1137 # This used to depend on c-exp.c m2-exp.c TAGS
1138 # I believe this is wrong; the makefile standards for distclean just
1139 # describe removing files; the only sort of "re-create a distribution"
1140 # functionality described is if the distributed files are unmodified.
1141 # NB: While GDBSERVER might be configured on native systems, it isn't
1142 # always included in SUBDIRS.  Remove the gdbserver files explicitly.
1143 distclean: clean
1144         @$(MAKE) $(FLAGS_TO_PASS) DO=distclean "DODIRS=$(CLEANDIRS)" subdir_do
1145         rm -f gdbserver/config.status gdbserver/config.log
1146         rm -f gdbserver/tm.h gdbserver/xm.h gdbserver/nm.h
1147         rm -f gdbserver/Makefile gdbserver/config.cache
1148         rm -f nm.h config.status config.h stamp-h .gdbinit
1149         rm -f y.output yacc.acts yacc.tmp y.tab.h
1150         rm -f config.log config.cache
1151         rm -f Makefile
1152         rm -rf $(DEPDIR)
1153
1154 maintainer-clean: local-maintainer-clean do-maintainer-clean distclean
1155 realclean: maintainer-clean
1156
1157 local-maintainer-clean:
1158         @echo "This command is intended for maintainers to use;"
1159         @echo "it deletes files that may require special tools to rebuild."
1160         rm -f c-exp.c \
1161                 cp-name-parser.c \
1162                 ada-lex.c ada-exp.c \
1163                 objc-exp.c \
1164                 jv-exp.tab \
1165                 f-exp.c m2-exp.c p-exp.c
1166         rm -f TAGS $(INFOFILES)
1167         rm -f $(YYFILES)
1168         rm -f nm.h config.status
1169
1170 do-maintainer-clean:
1171         @$(MAKE) $(FLAGS_TO_PASS) DO=maintainer-clean "DODIRS=$(CLEANDIRS)" \
1172                 subdir_do
1173
1174 diststuff: $(DISTSTUFF) $(PACKAGE).pot $(CATALOGS)
1175         cd doc; $(MAKE) $(MFLAGS) diststuff
1176
1177 subdir_do: force
1178         @for i in $(DODIRS); do \
1179                 if [ -f ./$$i/Makefile ] ; then \
1180                         if (cd ./$$i; \
1181                                 $(MAKE) $(FLAGS_TO_PASS) $(DO)) ; then true ; \
1182                         else exit 1 ; fi ; \
1183                 else true ; fi ; \
1184         done
1185
1186 Makefile: Makefile.in config.status @frags@
1187         # Regenerate the Makefile and the tm.h / nm.h links.
1188         CONFIG_FILES="Makefile" \
1189           CONFIG_COMMANDS= \
1190           CONFIG_HEADERS= \
1191           $(SHELL) config.status
1192
1193 gnulib/Makefile: gnulib/Makefile.in gnulib/Makefile.in config.status @frags@
1194         CONFIG_FILES="gnulib/Makefile" \
1195           CONFIG_COMMANDS="depfiles" \
1196           CONFIG_HEADERS= \
1197           CONFIG_LINKS= \
1198           $(SHELL) config.status
1199
1200 config.h: stamp-h ; @true
1201 stamp-h: config.in config.status
1202         CONFIG_HEADERS=config.h:config.in \
1203           CONFIG_COMMANDS="default depdir" \
1204           CONFIG_FILES= \
1205           CONFIG_LINKS= \
1206           $(SHELL) config.status
1207
1208 config.status: configure configure.tgt configure.host
1209         $(SHELL) config.status --recheck
1210
1211 force:
1212
1213 # Documentation!
1214 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
1215 doc/refcard.dvi:
1216         cd doc; $(MAKE) refcard.dvi $(FLAGS_TO_PASS)
1217
1218 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
1219 doc/refcard.ps:
1220         cd doc; $(MAKE) refcard.ps $(FLAGS_TO_PASS)
1221
1222 # GDB MANUAL: TeX dvi file
1223 doc/gdb.dvi:
1224         cd doc; $(MAKE) gdb.dvi $(FLAGS_TO_PASS)
1225
1226 # GDB MANUAL: info file
1227 doc/gdb.info:
1228         cd doc; $(MAKE) gdb.info $(FLAGS_TO_PASS)
1229
1230 # Make copying.c from COPYING
1231 $(srcdir)/copying.c: @MAINTAINER_MODE_TRUE@ $(srcdir)/../COPYING3 $(srcdir)/copying.awk
1232         awk -f $(srcdir)/copying.awk \
1233                 < $(srcdir)/../COPYING3 > $(srcdir)/copying.tmp
1234         mv $(srcdir)/copying.tmp $(srcdir)/copying.c
1235
1236 version.c: Makefile version.in
1237         rm -f version.c-tmp version.c
1238         echo '#include "version.h"' >> version.c-tmp
1239         echo 'const char version[] = "'"`sed q ${srcdir}/version.in`"'";' >> version.c-tmp
1240         echo 'const char host_name[] = "$(host_alias)";' >> version.c-tmp
1241         echo 'const char target_name[] = "$(target_alias)";' >> version.c-tmp
1242         mv version.c-tmp version.c
1243
1244 observer.h: observer.sh doc/observer.texi
1245         ${srcdir}/observer.sh h ${srcdir}/doc/observer.texi observer.h
1246
1247 observer.inc: observer.sh doc/observer.texi
1248         ${srcdir}/observer.sh inc ${srcdir}/doc/observer.texi observer.inc
1249
1250 lint: $(LINTFILES)
1251         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
1252            `echo $(DEPFILES) $(CONFIG_OBS) | sed 's/\.o /\.c /g'`
1253
1254 gdb.cxref: $(SFILES)
1255         cxref -I. $(SFILES) >gdb.cxref
1256
1257 force_update:
1258
1259 # GNU Make has an annoying habit of putting *all* the Makefile variables
1260 # into the environment, unless you include this target as a circumvention.
1261 # Rumor is that this will be fixed (and this target can be removed)
1262 # in GNU Make 4.0.
1263 .NOEXPORT:
1264
1265 # GNU Make 3.63 has a different problem: it keeps tacking command line
1266 # overrides onto the definition of $(MAKE).  This variable setting
1267 # will remove them.
1268 MAKEOVERRIDES=
1269
1270 ALLDEPFILES = \
1271         aix-thread.c \
1272         alpha-nat.c alphabsd-nat.c alpha-linux-nat.c \
1273         alpha-tdep.c alpha-mdebug-tdep.c \
1274         alpha-linux-tdep.c alpha-osf1-tdep.c \
1275         alphabsd-tdep.c alphafbsd-tdep.c alphanbsd-tdep.c alphaobsd-tdep.c \
1276         amd64-nat.c amd64-tdep.c \
1277         amd64bsd-nat.c amd64fbsd-nat.c amd64fbsd-tdep.c \
1278         amd64nbsd-nat.c amd64nbsd-tdep.c \
1279         amd64obsd-nat.c amd64obsd-tdep.c \
1280         amd64-dicos-tdep.c \
1281         amd64-linux-nat.c amd64-linux-tdep.c \
1282         amd64-sol2-tdep.c \
1283         arm-linux-nat.c arm-linux-tdep.c arm-tdep.c \
1284         armnbsd-nat.c armbsd-tdep.c armnbsd-tdep.c armobsd-tdep.c \
1285         avr-tdep.c \
1286         bsd-uthread.c bsd-kvm.c \
1287         core-regset.c corelow.c \
1288         dcache.c dicos-tdep.c \
1289         exec.c \
1290         fbsd-nat.c \
1291         fork-child.c \
1292         glibc-tdep.c \
1293         go32-nat.c h8300-tdep.c \
1294         hppa-tdep.c hppa-hpux-tdep.c hppa-hpux-nat.c \
1295         hppa-linux-tdep.c hppa-linux-nat.c \
1296         hppabsd-nat.c hppabsd-tdep.c \
1297         hppaobsd-tdep.c \
1298         hppanbsd-nat.c hppanbsd-tdep.c \
1299         i386-tdep.c i386-linux-nat.c \
1300         i386v4-nat.c i386-cygwin-tdep.c \
1301         i386bsd-nat.c i386bsd-tdep.c i386fbsd-nat.c i386fbsd-tdep.c \
1302         i386nbsd-nat.c i386nbsd-tdep.c i386obsd-nat.c i386obsd-tdep.c \
1303         i387-tdep.c \
1304         i386-dicos-tdep.c \
1305         i386-linux-tdep.c i386-nat.c \
1306         i386-sol2-nat.c i386-sol2-tdep.c \
1307         i386gnu-nat.c i386gnu-tdep.c \
1308         ia64-linux-nat.c ia64-linux-tdep.c ia64-tdep.c \
1309         inf-ptrace.c inf-ttrace.c \
1310         irix5-nat.c \
1311         libunwind-frame.c \
1312         linux-fork.c \
1313         linux-tdep.c \
1314         m68hc11-tdep.c \
1315         m32r-tdep.c \
1316         m32r-linux-nat.c m32r-linux-tdep.c \
1317         m68k-tdep.c \
1318         m68kbsd-nat.c m68kbsd-tdep.c \
1319         m68klinux-nat.c m68klinux-tdep.c \
1320         m88k-tdep.c m88kbsd-nat.c \
1321         mingw-hdep.c \
1322         mips-linux-nat.c mips-linux-tdep.c \
1323         mips-irix-tdep.c \
1324         mips-tdep.c \
1325         mipsnbsd-nat.c mipsnbsd-tdep.c \
1326         mips64obsd-nat.c mips64obsd-tdep.c \
1327         nbsd-nat.c nbsd-tdep.c obsd-tdep.c \
1328         solib-osf.c \
1329         solib-target.c \
1330         somread.c solib-som.c \
1331         posix-hdep.c \
1332         ppc-sysv-tdep.c ppc-linux-nat.c ppc-linux-tdep.c \
1333         ppcnbsd-nat.c ppcnbsd-tdep.c \
1334         ppcobsd-nat.c ppcobsd-tdep.c \
1335         procfs.c \
1336         remote-m32r-sdi.c remote-mips.c \
1337         remote-sim.c \
1338         dcache.c \
1339         rs6000-nat.c rs6000-tdep.c \
1340         s390-tdep.c s390-nat.c \
1341         score-tdep.c \
1342         ser-go32.c ser-pipe.c ser-tcp.c ser-mingw.c \
1343         sh-tdep.c sh64-tdep.c shnbsd-tdep.c shnbsd-nat.c \
1344         sol2-tdep.c \
1345         solib-irix.c solib-svr4.c solib-sunos.c \
1346         sparc-linux-nat.c \
1347         sparc-linux-tdep.c sparc-nat.c sparc-sol2-nat.c sparc-sol2-tdep.c \
1348         sparc-tdep.c sparc-sol2-nat.c sparc-sol2-tdep.c sparc64-linux-nat.c \
1349         sparc64-linux-tdep.c sparc64-nat.c sparc64-sol2-tdep.c \
1350         sparc64-tdep.c sparc64fbsd-nat.c sparc64fbsd-tdep.c \
1351         sparc64nbsd-nat.c sparc64nbsd-tdep.c sparc64obsd-tdep.c \
1352         sparcnbsd-nat.c sparcnbsd-tdep.c sparcobsd-tdep.c \
1353         spu-linux-nat.c spu-tdep.c \
1354         v850-tdep.c \
1355         vax-nat.c vax-tdep.c vaxbsd-nat.c vaxnbsd-tdep.c \
1356         windows-nat.c windows-tdep.c \
1357         xcoffread.c xcoffsolib.c \
1358         xstormy16-tdep.c \
1359         xtensa-tdep.c xtensa-config.c \
1360         xtensa-linux-tdep.c xtensa-linux-nat.c xtensa-xtregs.c
1361
1362 # Some files need explicit build rules (due to -Werror problems) or due
1363 # to sub-directory fun 'n' games.
1364
1365 hpux-thread.o: $(srcdir)/hpux-thread.c
1366         $(COMPILE) -I$(srcdir)/osf-share -I$(srcdir)/osf-share/HP800 \
1367                 -I/usr/include/dce $(srcdir)/hpux-thread.c
1368         $(POSTCOMPILE)
1369
1370 # main.o needs an explicit build rule to get TARGET_SYSTEM_ROOT and BINDIR.
1371 main.o: $(srcdir)/main.c
1372         $(COMPILE) $(TARGET_SYSTEM_ROOT_DEFINE) -DBINDIR=\"$(bindir)\" $(srcdir)/main.c
1373         $(POSTCOMPILE)
1374
1375 # FIXME: cagney/2003-08-10: "monitor.c" gets -Wformat-nonliteral
1376 # errors.  It turns out that that is the least of monitor.c's
1377 # problems.  The function print_vsprintf appears to be using
1378 # va_arg(long) to extract CORE_ADDR parameters - something that
1379 # definitly will not work.  "monitor.c" needs to be rewritten so that
1380 # it doesn't use format strings and instead uses callbacks.
1381 monitor.o: $(srcdir)/monitor.c
1382         $(COMPILE.pre) $(INTERNAL_WARN_CFLAGS) $(COMPILE.post) $(srcdir)/monitor.c
1383         $(POSTCOMPILE)
1384
1385 # Do not try to build "printcmd.c" with -Wformat-nonliteral.  It manually
1386 # checks format strings.
1387 printcmd.o: $(srcdir)/printcmd.c
1388         $(COMPILE.pre) $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS_NO_FORMAT) \
1389                 $(GDB_WERROR_CFLAGS) $(COMPILE.post) $(srcdir)/printcmd.c
1390         $(POSTCOMPILE)
1391
1392 # Message files.  Based on code in gcc/Makefile.in.
1393
1394 # Rules for generating translated message descriptions.  Disabled by
1395 # autoconf if the tools are not available.
1396
1397 .SUFFIXES: .po .gmo .pox .pot
1398 .PHONY: all-po install-po uninstall-po clean-po update-po $(PACKAGE).pot
1399
1400 all-po: $(CATALOGS)
1401
1402 # This notation should be acceptable to all Make implementations used
1403 # by people who are interested in updating .po files.
1404 update-po: $(CATALOGS:.gmo=.pox)
1405
1406 # N.B. We do not attempt to copy these into $(srcdir).  The snapshot
1407 # script does that.
1408 .po.gmo:
1409         -test -d po || mkdir po
1410         $(GMSGFMT) --statistics -o $@ $<
1411
1412 # The new .po has to be gone over by hand, so we deposit it into
1413 # build/po with a different extension.  If build/po/$(PACKAGE).pot
1414 # exists, use it (it was just created), else use the one in srcdir.
1415 .po.pox:
1416         -test -d po || mkdir po
1417         $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \
1418                         then echo po/$(PACKAGE).pot; \
1419                         else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@
1420
1421 # This rule has to look for .gmo modules in both srcdir and the cwd,
1422 # and has to check that we actually have a catalog for each language,
1423 # in case they weren't built or included with the distribution.
1424 install-po:
1425         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(datadir)
1426         cats="$(CATALOGS)"; for cat in $$cats; do \
1427           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1428           if [ -f $$cat ]; then :; \
1429           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1430           else continue; \
1431           fi; \
1432           dir=$(localedir)/$$lang/LC_MESSAGES; \
1433           echo $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir; \
1434           $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$$dir || exit 1; \
1435           echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1436           $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \
1437         done
1438 uninstall-po:
1439         cats="$(CATALOGS)"; for cat in $$cats; do \
1440           lang=`basename $$cat | sed 's/\.gmo$$//'`; \
1441           if [ -f $$cat ]; then :; \
1442           elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \
1443           else continue; \
1444           fi; \
1445           dir=$(localedir)/$$lang/LC_MESSAGES; \
1446           rm -f $(DESTDIR)$$dir/$(PACKAGE).mo; \
1447         done
1448 # Delete po/*.gmo only if we are not building in the source directory.
1449 clean-po:
1450         -if [ ! -f Makefile.in ]; then rm -f po/*.gmo; fi
1451
1452 # Rule for regenerating the message template (gdb.pot).  Instead of
1453 # forcing everyone to edit POTFILES.in, which proved impractical, this
1454 # rule has no dependencies and always regenerates gdb.pot.  This is
1455 # relatively harmless since the .po files do not directly depend on
1456 # it.  The .pot file is left in the build directory.  Since GDB's
1457 # Makefile lacks a cannonical list of sources (missing xm, tm and nm
1458 # files) force this rule.
1459 $(PACKAGE).pot: po/$(PACKAGE).pot
1460 po/$(PACKAGE).pot: force
1461         -test -d po || mkdir po
1462         sh -e $(srcdir)/po/gdbtext $(XGETTEXT) $(PACKAGE) . $(srcdir)
1463
1464
1465 #
1466 # YACC/LEX dependencies
1467 #
1468 # LANG-exp.c is generated in objdir from LANG-exp.y if it doesn't
1469 # exist in srcdir, then compiled in objdir to LANG-exp.o.  If we
1470 # said LANG-exp.c rather than ./c-exp.c some makes would
1471 # sometimes re-write it into $(srcdir)/c-exp.c.  Remove bogus
1472 # decls for malloc/realloc/free which conflict with everything else.
1473 # Strictly speaking c-exp.c should therefore depend on
1474 # Makefile.in, but that was a pretty big annoyance.
1475
1476 .SUFFIXES: .y .l
1477 .y.c:
1478         $(SHELL) $(YLWRAP) $< y.tab.c $@.tmp -- $(YACC) $(YFLAGS)
1479         -sed -e '/extern.*malloc/d' \
1480              -e '/extern.*realloc/d' \
1481              -e '/extern.*free/d' \
1482              -e '/include.*malloc.h/d' \
1483              -e 's/\([^x]\)malloc/\1xmalloc/g' \
1484              -e 's/\([^x]\)realloc/\1xrealloc/g' \
1485              -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1486              -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1487              -e '/^#line.*y.tab.c/d' \
1488           < $@.tmp > $@.new
1489         -rm $@.tmp
1490         mv $@.new ./$*.c
1491 .l.c:
1492         if [ "$(FLEX)" ] && $(FLEX) --version >/dev/null 2>&1; then \
1493             $(FLEX) -o$@ $< && \
1494             rm -f $@.new && \
1495             sed -e '/extern.*malloc/d' \
1496                 -e '/extern.*realloc/d' \
1497                 -e '/extern.*free/d' \
1498                 -e '/include.*malloc.h/d' \
1499                 -e 's/\([^x]\)malloc/\1xmalloc/g' \
1500                 -e 's/\([^x]\)realloc/\1xrealloc/g' \
1501                 -e 's/\([ \t;,(]\)free\([ \t]*[&(),]\)/\1xfree\2/g' \
1502                 -e 's/\([ \t;,(]\)free$$/\1xfree/g' \
1503                 -e 's/yy_flex_xrealloc/yyxrealloc/g' \
1504               < $@ > $@.new && \
1505             rm -f $@ && \
1506             mv $@.new $@; \
1507         elif [ -f $@ ]; then \
1508             echo "Warning: $*.c older than $*.l and flex not available."; \
1509         else \
1510             echo "$@ missing and flex not available."; \
1511             false; \
1512         fi
1513
1514 .PRECIOUS: ada-exp.c ada-lex.c
1515 .PRECIOUS: c-exp.c
1516 .PRECIOUS: f-exp.c
1517 .PRECIOUS: jv-exp.c
1518 .PRECIOUS: m2-exp.c
1519 .PRECIOUS: objc-exp.c
1520 .PRECIOUS: p-exp.c
1521
1522 # XML rules
1523
1524 xml-builtin.c: stamp-xml; @true
1525 stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES)
1526         rm -f xml-builtin.tmp
1527         AWK="$(AWK)" \
1528           $(SHELL) $(srcdir)/features/feature_to_c.sh \
1529           xml-builtin.tmp $(XMLFILES)
1530         $(SHELL) $(srcdir)/../move-if-change xml-builtin.tmp xml-builtin.c
1531         echo stamp > stamp-xml
1532
1533 .PRECIOUS: xml-builtin.c
1534
1535 #
1536 # gdb/cli/ dependencies
1537 #
1538 # Need to explicitly specify the compile rule as make will do nothing
1539 # or try to compile the object file into the sub-directory.
1540
1541 cli-cmds.o: $(srcdir)/cli/cli-cmds.c
1542         $(COMPILE) $(srcdir)/cli/cli-cmds.c
1543         $(POSTCOMPILE)
1544
1545 cli-decode.o: $(srcdir)/cli/cli-decode.c
1546         $(COMPILE) $(srcdir)/cli/cli-decode.c
1547         $(POSTCOMPILE)
1548
1549 cli-dump.o: $(srcdir)/cli/cli-dump.c
1550         $(COMPILE) $(srcdir)/cli/cli-dump.c
1551         $(POSTCOMPILE)
1552
1553 cli-interp.o: $(srcdir)/cli/cli-interp.c
1554         $(COMPILE) $(srcdir)/cli/cli-interp.c
1555         $(POSTCOMPILE)
1556
1557 cli-logging.o: $(srcdir)/cli/cli-logging.c
1558         $(COMPILE) $(srcdir)/cli/cli-logging.c
1559         $(POSTCOMPILE)
1560
1561 cli-script.o: $(srcdir)/cli/cli-script.c
1562         $(COMPILE) $(srcdir)/cli/cli-script.c
1563         $(POSTCOMPILE)
1564
1565 cli-setshow.o: $(srcdir)/cli/cli-setshow.c
1566         $(COMPILE) $(srcdir)/cli/cli-setshow.c
1567         $(POSTCOMPILE)
1568
1569
1570 #
1571 # GDBTK sub-directory
1572 #
1573 # Need to explicitly specify the compile rule as make will do nothing
1574 # or try to compile the object file into the mi directory.
1575
1576 all-gdbtk: insight$(EXEEXT)
1577
1578 install-gdbtk:
1579         transformed_name=`t='$(program_transform_name)'; \
1580                   echo insight | sed -e $$t` ; \
1581         if test "x$$transformed_name" = x; then \
1582           transformed_name=insight ; \
1583         else \
1584           true ; \
1585         fi ; \
1586         $(SHELL) $(srcdir)/../mkinstalldirs $(DESTDIR)$(bindir); \
1587         $(INSTALL_PROGRAM) insight$(EXEEXT) \
1588                 $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1589         $(SHELL) $(srcdir)/../mkinstalldirs \
1590                 $(DESTDIR)$(GDBTK_LIBRARY) ; \
1591         $(SHELL) $(srcdir)/../mkinstalldirs \
1592                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION) ; \
1593         $(INSTALL_DATA) $(srcdir)/gdbtk/plugins/plugins.tcl \
1594                 $(DESTDIR)$(libdir)/insight$(GDBTK_VERSION)/plugins.tcl ; \
1595         $(SHELL) $(srcdir)/../mkinstalldirs \
1596                 $(DESTDIR)$(GDBTK_LIBRARY)/images \
1597                 $(DESTDIR)$(GDBTK_LIBRARY)/images2 ; \
1598         $(SHELL) $(srcdir)/../mkinstalldirs \
1599                 $(DESTDIR)$(GDBTK_LIBRARY)/help \
1600                 $(DESTDIR)$(GDBTK_LIBRARY)/help/images \
1601                 $(DESTDIR)$(GDBTK_LIBRARY)/help/trace ; \
1602         cd $(srcdir)/gdbtk/library ; \
1603         for i in *.tcl *.itcl *.ith *.itb images/*.gif images2/*.gif images/icons.txt images2/icons.txt tclIndex help/*.html  help/trace/*.html help/trace/index.toc help/images/*.gif help/images/*.png; \
1604           do \
1605                 $(INSTALL_DATA) $$i $(DESTDIR)$(GDBTK_LIBRARY)/$$i ; \
1606           done ;
1607
1608 uninstall-gdbtk:
1609         transformed_name=`t='$(program_transform_name)'; \
1610                   echo insight | sed -e $$t` ; \
1611         if test "x$$transformed_name" = x; then \
1612                 transformed_name=insight ; \
1613         else \
1614                 true ; \
1615         fi ; \
1616         rm -f $(DESTDIR)$(bindir)/$$transformed_name$(EXEEXT) ; \
1617         rm -rf $(DESTDIR)$(GDBTK_LIBRARY)
1618
1619 clean-gdbtk:
1620         rm -f insight$(EXEEXT)
1621
1622 # Removing the old gdb first works better if it is running, at least on SunOS.
1623 insight$(EXEEXT): gdbtk-main.o libgdb.a $(ADD_DEPS) \
1624                 $(CDEPS) $(TDEPLIBS)
1625         rm -f insight$(EXEEXT)
1626         $(CC_LD) $(INTERNAL_LDFLAGS) $(WIN32LDAPP) \
1627                 -o insight$(EXEEXT) gdbtk-main.o libgdb.a \
1628                 $(TDEPLIBS) $(TUI_LIBRARY) $(CLIBS) $(LOADLIBES)
1629
1630 gdbres.o: $(srcdir)/gdbtk/gdb.rc $(srcdir)/gdbtk/gdbtool.ico
1631         $(WINDRES) --include $(srcdir)/gdbtk $(srcdir)/gdbtk/gdb.rc gdbres.o
1632
1633 all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \
1634                 $(ITK_CFLAGS) $(TCL_CFLAGS) $(TK_CFLAGS) $(X11_CFLAGS) \
1635                 $(GDBTK_CFLAGS) \
1636                 -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \
1637                 -DSRC_DIR=\"$(GDBTK_SRC_DIR)\"
1638
1639 gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c
1640         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c
1641         $(POSTCOMPILE)
1642
1643 gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c
1644         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c
1645         $(POSTCOMPILE)
1646
1647 gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1648         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c
1649         $(POSTCOMPILE)
1650
1651 gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1652         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c
1653         $(POSTCOMPILE)
1654
1655 gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c
1656         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c
1657         $(POSTCOMPILE)
1658
1659 gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c
1660         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c
1661         $(POSTCOMPILE)
1662
1663 gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c
1664         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c
1665         $(POSTCOMPILE)
1666
1667 gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c
1668         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c
1669         $(POSTCOMPILE)
1670
1671 gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1672         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c
1673         $(POSTCOMPILE)
1674
1675 gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1676         $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c
1677         $(POSTCOMPILE)
1678
1679
1680 #
1681 # gdb/mi/ dependencies
1682 #
1683 # Need to explicitly specify the compile rule as make will do nothing
1684 # or try to compile the object file into the sub-directory.
1685
1686 mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c
1687         $(COMPILE) $(srcdir)/mi/mi-cmd-break.c
1688         $(POSTCOMPILE)
1689
1690 mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c
1691         $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c
1692         $(POSTCOMPILE)
1693
1694 mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c
1695         $(COMPILE) $(srcdir)/mi/mi-cmd-env.c
1696         $(POSTCOMPILE)
1697
1698 mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c
1699         $(COMPILE) $(srcdir)/mi/mi-cmd-file.c
1700         $(POSTCOMPILE)
1701
1702 mi-cmds.o: $(srcdir)/mi/mi-cmds.c
1703         $(COMPILE) $(srcdir)/mi/mi-cmds.c
1704         $(POSTCOMPILE)
1705
1706 mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c
1707         $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c
1708         $(POSTCOMPILE)
1709
1710 mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c
1711         $(COMPILE) $(srcdir)/mi/mi-cmd-target.c
1712         $(POSTCOMPILE)
1713
1714 mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c
1715         $(COMPILE) $(srcdir)/mi/mi-cmd-var.c
1716         $(POSTCOMPILE)
1717
1718 mi-console.o: $(srcdir)/mi/mi-console.c
1719         $(COMPILE) $(srcdir)/mi/mi-console.c
1720         $(POSTCOMPILE)
1721
1722 mi-getopt.o: $(srcdir)/mi/mi-getopt.c
1723         $(COMPILE) $(srcdir)/mi/mi-getopt.c
1724         $(POSTCOMPILE)
1725
1726 mi-interp.o: $(srcdir)/mi/mi-interp.c
1727         $(COMPILE) $(srcdir)/mi/mi-interp.c
1728         $(POSTCOMPILE)
1729
1730 mi-main.o: $(srcdir)/mi/mi-main.c
1731         $(COMPILE) $(srcdir)/mi/mi-main.c
1732         $(POSTCOMPILE)
1733
1734 mi-out.o: $(srcdir)/mi/mi-out.c
1735         $(COMPILE) $(srcdir)/mi/mi-out.c
1736         $(POSTCOMPILE)
1737
1738 mi-parse.o: $(srcdir)/mi/mi-parse.c
1739         $(COMPILE) $(srcdir)/mi/mi-parse.c
1740         $(POSTCOMPILE)
1741
1742 mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c
1743         $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c
1744         $(POSTCOMPILE)
1745
1746 mi-common.o: $(srcdir)/mi/mi-common.c
1747         $(COMPILE) $(srcdir)/mi/mi-common.c
1748         $(POSTCOMPILE)
1749
1750 #
1751 # gdb/common/ dependencies
1752 #
1753 # Need to explicitly specify the compile rule as make will do nothing
1754 # or try to compile the object file into the sub-directory.
1755
1756 signals.o: $(srcdir)/common/signals.c
1757         $(COMPILE) $(srcdir)/common/signals.c
1758         $(POSTCOMPILE)
1759
1760 #
1761 # gdb/tui/ dependencies
1762 #
1763 # Need to explicitly specify the compile rule as make will do nothing
1764 # or try to compile the object file into the sub-directory.
1765
1766 tui.o: $(srcdir)/tui/tui.c
1767         $(COMPILE) $(srcdir)/tui/tui.c
1768         $(POSTCOMPILE)
1769
1770 tui-command.o: $(srcdir)/tui/tui-command.c
1771         $(COMPILE) $(srcdir)/tui/tui-command.c
1772         $(POSTCOMPILE)
1773
1774 tui-data.o: $(srcdir)/tui/tui-data.c
1775         $(COMPILE) $(srcdir)/tui/tui-data.c
1776         $(POSTCOMPILE)
1777
1778 tui-disasm.o: $(srcdir)/tui/tui-disasm.c
1779         $(COMPILE) $(srcdir)/tui/tui-disasm.c
1780         $(POSTCOMPILE)
1781
1782 tui-file.o: $(srcdir)/tui/tui-file.c
1783         $(COMPILE) $(srcdir)/tui/tui-file.c
1784         $(POSTCOMPILE)
1785
1786 tui-hooks.o: $(srcdir)/tui/tui-hooks.c
1787         $(COMPILE) $(srcdir)/tui/tui-hooks.c
1788         $(POSTCOMPILE)
1789
1790 tui-interp.o: $(srcdir)/tui/tui-interp.c
1791         $(COMPILE) $(srcdir)/tui/tui-interp.c
1792         $(POSTCOMPILE)
1793
1794 tui-io.o: $(srcdir)/tui/tui-io.c
1795         $(COMPILE) $(srcdir)/tui/tui-io.c
1796         $(POSTCOMPILE)
1797
1798 tui-layout.o: $(srcdir)/tui/tui-layout.c
1799         $(COMPILE) $(srcdir)/tui/tui-layout.c
1800         $(POSTCOMPILE)
1801
1802 tui-main.o: $(srcdir)/tui/tui-main.c
1803         $(COMPILE) $(srcdir)/tui/tui-main.c
1804         $(POSTCOMPILE)
1805
1806 tui-out.o: $(srcdir)/tui/tui-out.c
1807         $(COMPILE) $(srcdir)/tui/tui-out.c
1808         $(POSTCOMPILE)
1809
1810 tui-regs.o: $(srcdir)/tui/tui-regs.c
1811         $(COMPILE) $(srcdir)/tui/tui-regs.c
1812         $(POSTCOMPILE)
1813
1814 tui-source.o: $(srcdir)/tui/tui-source.c
1815         $(COMPILE) $(srcdir)/tui/tui-source.c
1816         $(POSTCOMPILE)
1817
1818 tui-stack.o: $(srcdir)/tui/tui-stack.c
1819         $(COMPILE) $(srcdir)/tui/tui-stack.c
1820         $(POSTCOMPILE)
1821
1822 tui-win.o: $(srcdir)/tui/tui-win.c
1823         $(COMPILE) $(srcdir)/tui/tui-win.c
1824         $(POSTCOMPILE)
1825
1826 tui-windata.o: $(srcdir)/tui/tui-windata.c
1827         $(COMPILE) $(srcdir)/tui/tui-windata.c
1828         $(POSTCOMPILE)
1829
1830 tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c
1831         $(COMPILE) $(srcdir)/tui/tui-wingeneral.c
1832         $(POSTCOMPILE)
1833
1834 tui-winsource.o: $(srcdir)/tui/tui-winsource.c
1835         $(COMPILE) $(srcdir)/tui/tui-winsource.c
1836         $(POSTCOMPILE)
1837
1838 #
1839 # gdb/python/ dependencies
1840 #
1841 # Need to explicitly specify the compile rule as make will do nothing
1842 # or try to compile the object file into the sub-directory.
1843
1844 # Flags needed to compile Python code
1845 PYTHON_CFLAGS=@PYTHON_CFLAGS@
1846
1847 python.o: $(srcdir)/python/python.c
1848         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c
1849         $(POSTCOMPILE)
1850
1851 python-cmd.o: $(srcdir)/python/python-cmd.c
1852         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-cmd.c
1853         $(POSTCOMPILE)
1854
1855 python-frame.o: $(srcdir)/python/python-frame.c
1856         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-frame.c
1857         $(POSTCOMPILE)
1858
1859 python-function.o: $(srcdir)/python/python-function.c
1860         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-function.c
1861         $(POSTCOMPILE)
1862
1863 python-utils.o: $(srcdir)/python/python-utils.c
1864         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-utils.c
1865         $(POSTCOMPILE)
1866
1867 python-value.o: $(srcdir)/python/python-value.c
1868         $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python-value.c
1869         $(POSTCOMPILE)
1870
1871 #
1872 # Dependency tracking.  Most of this is conditional on GNU Make being
1873 # found by configure; if GNU Make is not found, we fall back to a
1874 # simpler scheme.
1875 #
1876
1877 @GMAKE_TRUE@ifeq ($(DEPMODE),depmode=gcc3)
1878 # Note that we put the dependencies into a .Tpo file, then move them
1879 # into place if the compile succeeds.  We need this because gcc does
1880 # not atomically write the dependency output file.
1881 @GMAKE_TRUE@override COMPILE.post = -c -o $@ -MT $@ -MMD -MP \
1882 @GMAKE_TRUE@    -MF $(DEPDIR)/$(basename $(@F)).Tpo
1883 @GMAKE_TRUE@override POSTCOMPILE = @mv $(DEPDIR)/$(basename $(@F)).Tpo \
1884 @GMAKE_TRUE@    $(DEPDIR)/$(basename $(@F)).Po
1885 @GMAKE_TRUE@else
1886 @GMAKE_TRUE@override COMPILE.pre = source='$<' object='$@' libtool=no \
1887 @GMAKE_TRUE@    DEPDIR=$(DEPDIR) $(DEPMODE) $(depcomp) $(CC)
1888 # depcomp handles atomicity for us, so we don't need a postcompile
1889 # step.
1890 @GMAKE_TRUE@override POSTCOMPILE =
1891 @GMAKE_TRUE@endif
1892
1893 # A list of all the objects we might care about in this build, for
1894 # dependency tracking.
1895 all_object_files = gdb.o tui-main.o $(LIBGDB_OBS) gdbtk-main.o \
1896         test-cp-name-parser.o
1897
1898 # Ensure that generated files are created early.  Use order-only
1899 # dependencies if available.  They require GNU make 3.80 or newer,
1900 # and the .VARIABLES variable was introduced at the same time.
1901 @GMAKE_TRUE@ifdef .VARIABLES
1902 @GMAKE_TRUE@$(all_object_files): | $(generated_files)
1903 @GMAKE_TRUE@else
1904 $(all_object_files) : $(generated_files)
1905 @GMAKE_TRUE@endif
1906
1907 # Dependencies.
1908 @GMAKE_TRUE@-include $(patsubst %.o, $(DEPDIR)/%.Po, $(all_object_files))
1909
1910 ### end of the gdb Makefile.in.