gdb/Makefile.in

   1 ##Copyright (C) 1989-1991 Free Software Foundation, Inc.
   2
   3 # This file is part of GDB.
   4
   5 # This program is free software; you can redistribute it and/or modify
   6 # it under the terms of the GNU General Public License as published by
   7 # the Free Software Foundation; either version 2 of the License, or
   8 # (at your option) any later version.
   9 #
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13 # GNU General Public License for more details.
  14 #
  15 # You should have received a copy of the GNU General Public License
  16 # along with this program; if not, write to the Free Software
  17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18
  19 # Host and target-dependent makefile fragments come in here.
  20 ####
  21 # End of host and target-dependent makefile fragments
  22
  23 # Destination directory of the software tree build
  24 ddestdir = /usr/local
  25
  26 # Place to install binaries in the destination tree.
  27 bindir=$(ddestdir)/bin
  28
  29 # System V: If you compile gdb with a compiler which uses the coff
  30 # encapsulation feature (this is a function of the compiler used, NOT
  31 # of the m-?.h file selected by config.gdb), you must make sure that
  32 # the GNU nm is the one that is used by munch.
  33
  34 # If you are compiling with GCC, make sure that either 1) You use the
  35 # -traditional flag, or 2) You have the fixed include files where GCC
  36 # can reach them.  Otherwise the ioctl calls in inflow.c
  37 # will be incorrectly compiled.  The "fixincludes" script in the gcc
  38 # distribution will fix your include files up.
  39 #CC=cc
  40 #CC=gcc -traditional
  41 GCC=gcc
  42
  43 # Directory containing source files.  Don't clean up the spacing,
  44 # this exact string is matched for by the "configure" script.
  45 srcdir = .
  46
  47 # It is also possible that you will need to add -I/usr/include/sys to the
  48 # CFLAGS section if your system doesn't have fcntl.h in /usr/include (which
  49 # is where it should be according to Posix).
  50
  51 BISON=bison -y
  52 BISONFLAGS=
  53 YACC=$(BISON) $(BISONFLAGS)
  54 # YACC=yacc
  55 SHELL=/bin/sh
  56 MAKE=make
  57
  58 # Documentation (gdb.dvi) needs either GNU m4 or SysV m4;
  59 # Berkeley/Sun don't have quite enough.
  60 #M4=/usr/5bin/m4
  61 M4=gm4
  62
  63 # where to find texinfo; GDB dist should include a recent one
  64 TEXIDIR=${srcdir}/../texinfo/fsf
  65
  66 # where to find makeinfo, preferably one designed for texinfo-2
  67 MAKEINFO=makeinfo
  68
  69 # Set this up with gcc if you have gnu ld and the loader will print out
  70 # line numbers for undefinded refs.
  71 #CC-LD=gcc -static
  72 CC-LD=${CC}
  73
  74 # define this to be "gmalloc.o" if you want to use the gnu malloc routine
  75 # (useful for debugging memory allocation problems in gdb).  To use your
  76 # system malloc, uncomment the following two lines.
  77 #GNU_MALLOC =
  78 #MALLOC_CFLAGS = -DNO_MALLOC_CHECK
  79 GNU_MALLOC = gmalloc.o mcheck.o mtrace.o
  80 MALLOC_CFLAGS =
  81
  82 # Where is the "include" directory?  Traditionally ../include or ./include
  83 INCLUDE_DIR =  ${srcdir}/../include
  84 INCLUDE_DEP = $$(INCLUDE_DIR)
  85
  86 # Where is the source dir for the BFD library?  Traditionally ../bfd or ./bfd
  87 # (When we want the binary library built from it, we use ${BFD_DIR}${subdir}.)
  88 BFD_DIR =  ${srcdir}/../bfd
  89 BFD_DEP = $$(BFD_DIR)
  90 BFD_LIB = $(unsubdir)/../bfd${subdir}/libbfd.a
  91
  92 # Where is the source dir for the READLINE library?  Traditionally in .. or .
  93 # (For the binary library built from it, we use ${READLINE_DIR}${subdir}.)
  94 READLINE_DIR = ${srcdir}/../readline
  95 READLINE_DEP = $$(READLINE_DIR)
  96 RL_LIB = $(unsubdir)/../readline${subdir}/libreadline.a
  97
  98 # All the includes used for CFLAGS and for lint.
  99 # -I. for config files.
 100 # -I${srcdir} possibly for regex.h also.
 101 INCLUDE_CFLAGS = -I. -I${srcdir} -I$(INCLUDE_DIR) -I$(READLINE_DIR) -I${srcdir}/vx-share
 102
 103 # {X,T}M_CFLAGS, if defined, has system-dependent CFLAGS.
 104 # CFLAGS for GDB
 105 MINUS_G=-g
 106 GLOBAL_CFLAGS = ${MINUS_G} ${TM_CFLAGS} ${XM_CFLAGS}
 107 #PROFILE_CFLAGS = -pg
 108
 109 CFLAGS = ${GLOBAL_CFLAGS} ${PROFILE_CFLAGS} ${MALLOC_CFLAGS} ${INCLUDE_CFLAGS}
 110 # None of the things in CFLAGS will do any harm, and on some systems
 111 #  (e.g. SunOS4) it is important to use the M_CFLAGS.
 112 LDFLAGS = $(CFLAGS)
 113
 114 # Where is the "-liberty" library, containing getopt and obstack?
 115 LIBIBERTY_DIR = ${srcdir}/../libiberty
 116 LIBIBERTY = $(unsubdir)/../libiberty${subdir}/libiberty.a
 117
 118 # Flags that describe where you can find the termcap library.
 119 # You may need to make other arrangements for USG.
 120 TERMCAP = -ltermcap
 121
 122 # The config/mh-* file must define REGEX and REGEX1 on USG machines.
 123 # If your sysyem is missing alloca(), or, more likely, it's there but
 124 # it doesn't work, define ALLOCA & ALLOCA1 too.
 125 # If your system is missing putenv(), add putenv.c to XM_ADD_FILES.
 126
 127 # Libraries and corresponding dependencies for compiling gdb.
 128 # {X,T}M_CLIBS, defined in *config files, have host- and target-dependent libs.
 129 # TERMCAP comes after readline, since readline depends on it.
 130 CLIBS = ${BFD_LIB}  ${RL_LIB} ${TERMCAP} ${LIBIBERTY} ${XM_CLIBS} ${TM_CLIBS}
 131 CDEPS = ${XM_CDEPS} ${TM_CDEPS} ${BFD_LIB} ${LIBIBERTY} ${RL_LIB}
 132
 133 ADD_FILES = ${REGEX} ${ALLOCA}  ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
 134 ADD_DEPS = ${REGEX1} ${ALLOCA1} ${GNU_MALLOC} ${XM_ADD_FILES} ${TM_ADD_FILES}
 135
 136 VERSION = 4.2.90
 137 DIST=gdb
 138
 139 LINT=/usr/5bin/lint
 140 LINTFLAGS= -I${BFD_DIR}
 141
 142 # Source files in the main directory.
 143 # Files which are included via a config/* Makefile fragment
 144 # should *not* be specified here; they're in "ALLDEPFILES".
 145 SFILES_MAINDIR = \
 146          blockframe.c breakpoint.c command.c core.c \
 147          environ.c eval.c expprint.c findvar.c infcmd.c inflow.c infrun.c \
 148          main.c printcmd.c \
 149          remote.c source.c stack.c symmisc.c symtab.c symfile.c \
 150          utils.c valarith.c valops.c valprint.c values.c c-exp.y m2-exp.y \
 151          signame.c cplus-dem.c mem-break.c target.c inftarg.c \
 152          dbxread.c coffread.c elfread.c dwarfread.c xcoffread.c \
 153          ieee-float.c language.c parse.c buildsym.c
 154
 155 # Source files in subdirectories (which will be handled separately by
 156 #  'make gdb.tar.Z').
 157 # Files which are included via a config/* Makefile fragment
 158 # should *not* be specified here; they're in "ALLDEPFILES".
 159 SFILES_SUBDIR = \
 160          ${srcdir}/vx-share/dbgRpcLib.h \
 161          ${srcdir}/vx-share/ptrace.h \
 162          ${srcdir}/vx-share/reg.h \
 163          ${srcdir}/vx-share/vxTypes.h \
 164          ${srcdir}/vx-share/vxWorks.h \
 165          ${srcdir}/vx-share/wait.h \
 166          ${srcdir}/vx-share/xdr_ld.h \
 167          ${srcdir}/vx-share/xdr_ptrace.h \
 168          ${srcdir}/vx-share/xdr_rdb.h \
 169          ${srcdir}/vx-share/xdr_regs.h \
 170          ${srcdir}/nindy-share/b.out.h \
 171          ${srcdir}/nindy-share/block_io.h \
 172          ${srcdir}/nindy-share/coff.h \
 173          ${srcdir}/nindy-share/demux.h \
 174          ${srcdir}/nindy-share/env.h \
 175          ${srcdir}/nindy-share/stop.h \
 176          ${srcdir}/nindy-share/ttycntl.h
 177
 178 # Non-source files in subdirs, that should go into gdb.tar.Z.
 179 NONSRC_SUBDIR = \
 180          ${srcdir}/nindy-share/Makefile \
 181          ${srcdir}/nindy-share/VERSION
 182
 183 # All source files that go into linking GDB, except config-specified files.
 184 SFILES = $(SFILES_MAINDIR) $(SFILES_SUBDIR)
 185
 186 # All source files that lint should look at
 187 LINTFILES = $(SFILES) $(YYFILES) init.c
 188
 189 # Any additional files specified on these lines should also be added to
 190 # the OTHERS = definition below, so they go in the tar files.
 191 SFILES_STAND = $(SFILES) standalone.c
 192 SFILES_KGDB  = $(SFILES) stuff.c kdb-start.c
 193
 194 # Header files that are not named in config/* Makefile fragments go here.
 195 HFILES= breakpoint.h command.h defs.h environ.h \
 196         expression.h frame.h gdbcmd.h gdbcore.h \
 197         ieee-float.h inferior.h minimon.h \
 198         signals.h signame.h symfile.h symtab.h \
 199         target.h terminal.h tm-68k.h tm-i960.h tm-sunos.h \
 200         language.h parser-defs.h value.h
 201
 202 # Header files for machine opcode tables.
 203 # when OPCODE_DIR changes to ../include, remove the whole $(OPCODES)
 204 # business, since they will be included in the separate includes tar file
 205 # rather than in the gdb tar file.
 206 OPCODE_DIR =
 207 OPCODES = $(OPCODE_DIR)pn-opcode.h $(OPCODE_DIR)np1-opcode.h \
 208         $(OPCODE_DIR)sparc-opcode.h $(OPCODE_DIR)vax-opcode.h \
 209         $(OPCODE_DIR)m68k-opcode.h $(OPCODE_DIR)ns32k-opcode.h \
 210         $(OPCODE_DIR)convx-opcode.h $(OPCODE_DIR)pyr-opcode.h \
 211         $(OPCODE_DIR)mips-opcode.h $(OPCODE_DIR)am29k-opcode.h \
 212         $(OPCODE_DIR)arm-opcode.h $(OPCODE_DIR)m88k-opcode.h \
 213         $(OPCODE_DIR)tahoe-opcode.h
 214
 215 REMOTE_EXAMPLES = m68k-stub.c i386-stub.c rem-multi.shar
 216
 217 MALLOCSRC = gmalloc.c mcheck.c mtrace.c mtrace.awk \
 218             ansidecl.h gmalloc.h
 219
 220 POSSLIBS_MAINDIR = regex.c regex.h alloca.c $(MALLOCSRC)
 221 POSSLIBS = $(POSSLIBS_MAINDIR)
 222
 223 TESTS = testbpt.c testfun.c testrec.c testreg.c testregs.c
 224
 225 OTHERS = Makefile.in depend alldeps.mak createtags munch configure.in \
 226          ChangeLog ChangeLog-3.x refcard.ps \
 227          README TODO TAGS WHATS.NEW Projects \
 228          .gdbinit COPYING $(YYFILES) \
 229          copying.c Convex.notes copying.awk \
 230          saber.suppress standalone.c stuff.c kdb-start.c \
 231          putenv.c
 232
 233 # Subdirectories of gdb, which should be included in their entirety in
 234 # gdb-xxx.tar.Z:
 235 TARDIRS = doc # tests
 236
 237 # GDB "info" files, which should be included in their entirety
 238 INFOFILES = gdb.info*
 239
 240 DEPFILES= ${TDEPFILES} ${XDEPFILES}
 241
 242 SOURCES=$(SFILES) $(ALLDEPFILES) $(YYFILES)
 243 TAGFILES = $(SOURCES) ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS}
 244 TAGFILES_MAINDIR = $(SFILES_MAINDIR) $(ALLDEPFILES_MAINDIR) \
 245              ${HFILES} ${OPCODES} ${ALLPARAM} ${POSSLIBS_MAINDIR}
 246 TARFILES = ${TAGFILES_MAINDIR} ${OTHERS} ${REMOTE_EXAMPLES}
 247
 248 OBS = main.o blockframe.o breakpoint.o findvar.o stack.o source.o \
 249     values.o eval.o valops.o valarith.o valprint.o printcmd.o \
 250     symtab.o symfile.o symmisc.o infcmd.o infrun.o remote.o \
 251     command.o utils.o expprint.o environ.o version.o \
 252     copying.o $(DEPFILES) signame.o cplus-dem.o mem-break.o target.o \
 253     inftarg.o ieee-float.o putenv.o parse.o language.o $(YYOBJ) \
 254     buildsym.o \
 255     dbxread.o coffread.o elfread.o dwarfread.o xcoffread.o # mipsread.o
 256
 257 RAPP_OBS = rgdb.o rudp.o rserial.o serial.o udp.o $(XDEPFILES)
 258
 259 TSOBS = core.o inflow.o
 260
 261 NTSOBS = standalone.o
 262
 263 TSSTART = /lib/crt0.o
 264
 265 NTSSTART = kdb-start.o
 266
 267 SUBDIRS = doc
 268
 269 # For now, shortcut the "configure GDB for fewer languages" stuff.
 270 YYFILES = c-exp.tab.c m2-exp.tab.c
 271 YYOBJ = c-exp.tab.o m2-exp.tab.o
 272
 273 # Prevent Sun make from putting in the machine type.  Setting
 274 # TARGET_ARCH to nothing works for SunOS 3, 4.0, but not for 4.1.
 275 .c.o:
 276         ${CC} -c ${CFLAGS} $<
 277
 278 all: gdb
 279         $(MAKE) subdir_do DO=all "DODIRS=$(SUBDIRS)"
 280 all-info: force
 281         $(MAKE) subdir_do DO=all-info "DODIRS=$(SUBDIRS)"
 282 install-info: force
 283         $(MAKE) subdir_do DO=install-info "DODIRS=$(SUBDIRS)"
 284
 285 gdb.z:gdb.1
 286         nroff -man gdb.1 | col -b > gdb.t
 287         pack gdb.t ; rm -f gdb.t
 288         mv gdb.t.z gdb.z
 289
 290 install: gdb gdb.z
 291         cp gdb $(bindir)/gdb.new
 292         mv $(bindir)/gdb.new $(bindir)/gdb
 293         $(M_INSTALL)
 294         $(MAKE) subdir_do DO=install "DODIRS=$(SUBDIRS)"
 295
 296 init.c: $(srcdir)/munch $(OBS) $(TSOBS)
 297         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(TSOBS) > init.c
 298
 299 gdb: $(OBS) $(TSOBS) ${ADD_DEPS} ${CDEPS} init.o
 300         ${CC-LD} $(LDFLAGS) -o gdb init.o $(OBS) $(TSOBS) $(ADD_FILES) \
 301           $(CLIBS) $(LOADLIBES)
 302
 303 saber_gdb: $(SFILES) $(DEPFILES) copying.c version.c
 304         #setopt load_flags $(CFLAGS) -I$(BFD_DIR) -DHOST_SYS=SUN4_SYS
 305         #load ./init.c $(SFILES)
 306         #unload ${srcdir}/c-exp.y ${srcdir}/m2-exp.y ${srcdir}/vx-share/*.h
 307         #unload ${srcdir}/nindy-share/[A-Z]*
 308         #load c-exp.tab.c m2-exp.tab.c
 309         #load copying.c version.c
 310         #load `echo " "$(DEPFILES) | sed -e 's/\.o/.c/g' -e 's, , ../,g'`
 311         #load ${LIBIBERTY_DIR}/*.c
 312         #load ${BFD_DIR}/*.c
 313         #load ${READLINE_DIR}/*.c
 314         #load -ltermcap
 315         ##void mcheck(a) void (*a)(); { }
 316         ##void mtrace() { }
 317
 318
 319
 320 # This is useful when debugging GDB, because some Unix's don't let you run GDB
 321 # on itself without copying the executable.  So "make gdb1" will make
 322 # gdb and put a copy in gdb1, and you can run it with "gdb gdb1".
 323 # Removing gdb1 before the copy is the right thing if gdb1 is open
 324 # in another process.
 325 gdb1: gdb
 326         rm -f gdb1
 327         cp gdb gdb1
 328
 329 # This is a remote stub which runs under unix and starts up an
 330 # inferior process.  This is at least useful for debugging GDB's
 331 # remote support.
 332 rapp: $(RAPP_OBS)
 333         rm -f rapp_init.c
 334         ${srcdir}/munch ${MUNCH_DEFINE} ${RAPP_OBS} > rapp_init.c
 335         ${CC-LD} $(LDFLAGS) -o $@ rapp_init.c $(RAPP_OBS)
 336
 337 # Support for building Makefile out of configured pieces, automatically
 338 # generated dependencies, etc.  alldeps.mak is a file that contains
 339 # "make" variable definitions for all ALLDEPFILES, ALLDEPFILES_MAINDIR,
 340 # ALLDEPFILES_SUBDIR, ALLPARAM, and ALLCONFIG, all cadged from the current
 341 # contents of the config subdirectory.
 342
 343 alldeps.mak: ${srcdir}/config
 344         rm -f alldeps.mak alldeps.tmp allparam.tmp allconfig.tmp
 345         for i in `ls -d ${srcdir}/config/m[ht]-*` ; do \
 346           echo $$i >>allconfig.tmp; \
 347           awk <$$i ' \
 348             $$1 == "TDEPFILES=" || $$1 == "XDEPFILES=" { \
 349               for (i = 2; i <= NF; i++) \
 350                 print $$i >> "alldeps.tmp" ; \
 351             } \
 352             $$1 == "TM_FILE=" || $$1 == "XM_FILE=" { \
 353               print $$2 >> "allparam.tmp" }' ; \
 354         done
 355         sort <alldeps.tmp | uniq | \
 356           sed -e 's/arm-convert.o/arm-convert.s/' \
 357               -e 's!^Onindy.o!nindy-share/Onindy.c!' \
 358               -e 's!^nindy.o!nindy-share/nindy.c!' \
 359               -e 's!ttybreak.o!nindy-share/ttybreak.c!' \
 360               -e 's!ttyflush.o!nindy-share/ttyflush.c!' \
 361               -e 's!xdr_ld.o!vx-share/xdr_ld.c!' \
 362               -e 's!xdr_ptrace.o!vx-share/xdr_ptrace.c!' \
 363               -e 's!xdr_rdb.o!vx-share/xdr_rdb.c!' \
 364               -e 's!xdr_regs.o!vx-share/xdr_regs.c!' \
 365               -e 's/\.o/.c/' \
 366             >alldeps2.tmp
 367         echo '# Start of "alldeps.mak" definitions' \
 368             >>alldeps.mak;
 369         echo 'ALLDEPFILES = $$(ALLDEPFILES_MAINDIR) $$(ALLDEPFILES_SUBDIR)' \
 370             >>alldeps.mak;
 371         grep -v / alldeps2.tmp | \
 372           awk 'BEGIN {printf "ALLDEPFILES_MAINDIR="} \
 373             NR == 0 {printf $$0;} \
 374             NR != 0 {printf "\\\n" $$0} \
 375             END {printf "\n\n"}' >>alldeps.mak;
 376         grep / alldeps2.tmp | \
 377           awk 'BEGIN {printf "ALLDEPFILES_SUBDIR="} \
 378             NR == 0 {printf $$0;} \
 379             NR != 0 {printf "\\\n" $$0} \
 380             END {printf "\n\n"}' >>alldeps.mak;
 381         sort <allparam.tmp | uniq | awk 'BEGIN {printf "ALLPARAM="} \
 382             NR == 0 {printf $$0;} \
 383             NR != 0 {printf "\\\n" $$0} \
 384             END {printf "\n\n"}' >>alldeps.mak;
 385         sort <allconfig.tmp | uniq | awk 'BEGIN {printf "ALLCONFIG="} \
 386             NR == 0 {printf $$0;} \
 387             NR != 0 {printf "\\\n" $$0} \
 388             END {printf "\n\n"}' >>alldeps.mak;
 389         echo '# End of "alldeps.mak" definitions' \
 390             >>alldeps.mak;
 391         rm -f alldeps.tmp alldeps2.tmp allparam.tmp allconfig.tmp
 392
 393 # The sed script makes everything which depends on {x,t}m.h depend on
 394 # config.status as well, in case someone reconfigures gdb out from
 395 # under an already compiled gdb.
 396 depend: $(SOURCES) Makefile.in
 397         @echo Ignore errors about non-existent system-supplied include files
 398         @echo for systems other than the one you are using.
 399         @echo "If xm.h and tm.h don't exist, the error messages saying so"
 400         @echo can safely be ignored.
 401         @echo Also ignore parse errors in valops.c, and any errors in
 402         @echo arm-convert.s.
 403         -$(GCC) -MM $(CFLAGS) -I$(BFD_DIR) \
 404           `ls $(SOURCES) | grep -v '\.[hy]$$' |sort -u` >depend.tmp
 405 # If running in srcdir, translate "./foo.c" into "$srcdir/foo.c" except
 406 # for xm.h and tm.h.  This allows the same "depend" file to be used
 407 # by the various subdirectories.
 408         if [ "${srcdir}" = "." ] ; then \
 409           <depend.tmp sed \
 410             -e 's; ./xm.h; xm.h;g'  \
 411             -e 's; ./tm.h; tm.h;g'  \
 412             -e 's; \./; $${srcdir}/;g'  \
 413             -e 's; vx-share/; $${srcdir}/vx-share/;g'  \
 414             -e 's; nindy-share/; $${srcdir}/nindy-share/;g'  \
 415             >depend.tm2; \
 416           rm depend.tmp; \
 417           mv depend.tm2 depend.tmp; \
 418         fi
 419         <depend.tmp sed \
 420           -e 's; [xt]m.h;& config.status;g'  \
 421           -e 's; $(INCLUDE_DIR)/; $(INCLUDE_DEP)/;g'  \
 422           -e 's; $(READLINE_DIR)/; $(READLINE_DEP)/;g'  \
 423           -e 's; [a-z0-9./]*bfd/; $(BFD_DEP)/;g'  \
 424           -e 's; ./xm.h; xm.h config.status;g'  \
 425           -e 's; ./tm.h; tm.h config.status;g'  \
 426           >depend
 427         rm depend.tmp
 428
 429 config.status:
 430         @echo "You must configure gdb.  Look at the README file for details."
 431         @false
 432
 433 # These are not generated by "make depend" because they only are there
 434 # for some machines.
 435 # But these rules don't do what we want; we want to hack the foo.o: tm.h
 436 # dependency to do the right thing.
 437 tm-isi.h tm-sun3.h tm-news.h tm-hp300bsd.h tm-altos.h: tm-68k.h
 438 tm-hp300hpux.h tm-sun2.h tm-3b1.h: tm-68k.h
 439 xm-news1000.h: xm-news.h
 440 xm-i386-sv32.h: xm-i386.h
 441 tm-i386gas.h: tm-i386.h
 442 xm-sun4os4.h: xm-sparc.h
 443 tm-sun4os4.h: tm-sparc.h
 444
 445 kdb: $(NTSSTART) $(OBS) $(NTSOBS) ${ADD_DEPS} ${CDEPS}
 446         rm -f init.c
 447         $(srcdir)/munch ${MUNCH_DEFINE} $(OBS) $(NTSOBS) > init.c
 448         $(CC) $(LDFLAGS) -c init.c $(CLIBS)
 449         ld -o kdb $(NTSSTART) $(OBS) $(NTSOBS) init.o $(ADD_FILES) \
 450           -lc $(CLIBS)
 451
 452 # Put the proper machine-specific files first.
 453 # createtags will edit the .o in DEPFILES into .c
 454 TAGS: ${TAGFILES}
 455         $(srcdir)/createtags $(TM_FILE) ${XM_FILE} $(DEPFILES) ${TAGFILES}
 456 tags: TAGS
 457
 458 # Making distributions of GDB and friends.
 459
 460 # Make a directory `proto-gdb.dir' that contains an image of the GDB
 461 # directory of the distribution, built up with symlinks.
 462 make-proto-gdb.dir: force_update
 463         $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
 464         $(MAKE) $(MFLAGS) -f Makefile    make-proto-gdb-1
 465
 466 # Make a tar file containing the GDB directory of the distribution.
 467 gdb.tar.Z: force_update
 468         $(MAKE) $(MFLAGS) -f Makefile.in setup-to-dist
 469         $(MAKE) $(MFLAGS) -f Makefile.in gdb-$(VERSION).tar.Z
 470
 471 # Set up the GDB directory for distribution, by building all files that
 472 # are products of other files.
 473 setup-to-dist: force_update
 474         ../configure none
 475         rm -f alldeps.mak
 476         $(MAKE) $(MFLAGS) alldeps.mak
 477         ../configure none
 478         rm -f depend
 479         $(MAKE) $(MFLAGS) depend
 480         ../configure none
 481         (cd doc; $(MAKE) $(MFLAGS) rdl-apps.texi gdbVN.m4)
 482         $(MAKE) $(MFLAGS) gdb.info
 483         $(MAKE) $(MFLAGS) refcard.ps
 484
 485 # Build a tar file from a proto-gdb.dir.
 486 gdb-$(VERSION).tar.Z: force_update
 487         rm -f gdb.tar gdb-$(VERSION).tar.Z
 488         $(MAKE) $(MFLAGS) -f Makefile    make-proto-gdb-1
 489         ln -s proto-gdb.dir $(DIST)
 490         tar chf - $(DIST) | compress >gdb-$(VERSION).tar.Z
 491         rm -rf $(DIST) proto-gdb.dir
 492
 493 # Build a proto-gdb.dir after GDB has been set up for distribution.
 494 # This stuff must be run in `Makefile', not `Makefile.in`; we use the makefile
 495 # built in the setup-to-dist process, since it defines things like ALLCONFIG
 496 # and ALLDEPFILES, that we need.
 497 make-proto-gdb-1: ${TARFILES} ${TARDIRS} gdb.info
 498         rm -rf proto-gdb.dir
 499         mkdir proto-gdb.dir
 500         cd proto-gdb.dir ; for i in ${TARFILES} ; do ln -s ../$$i . ; done
 501         cd proto-gdb.dir ; ln -s ../${INFOFILES} .
 502         cd proto-gdb.dir ; for i in ${TARDIRS}; do \
 503           (mkdir $$i; cd $$i; \
 504           ln -s ../../$$i/* .; \
 505           rm -rf SCCS CVS.adm RCS); done
 506         mkdir proto-gdb.dir/config
 507         cd proto-gdb.dir/config ; \
 508           for i in $(ALLCONFIG) ; do ln -s ../../$$i ../$$i ; done
 509         mkdir proto-gdb.dir/vx-share proto-gdb.dir/nindy-share
 510         cd proto-gdb.dir/config ; \
 511           for i in $(SFILES_SUBDIR) $(NONSRC_SUBDIR) $(ALLDEPFILES_SUBDIR); \
 512             do ln -s ../../$$i ../$$i ; done
 513         chmod og=u `find . -print`
 514
 515 clean:
 516         rm -f ${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES}
 517         rm -f init.c init.o version.c
 518         rm -f gdb core gdb.tar gdb.tar.Z make.log
 519         rm -f gdb[0-9]
 520         $(MAKE) subdir_do DO=clean "DODIRS=$(SUBDIRS)"
 521
 522 distclean: clean c-exp.tab.c m2-exp.tab.c TAGS
 523         rm -f tm.h xm.h config.status
 524         rm -f y.output yacc.acts yacc.tmp
 525         rm -f ${TESTS} Makefile depend
 526         $(MAKE) subdir_do DO=distclean "DODIRS=$(SUBDIRS)"
 527
 528 realclean: clean
 529         rm -f c-exp.tab.c m2-exp.tab.c TAGS
 530         rm -f tm.h xm.h config.status
 531         rm -f Makefile depend
 532         $(MAKE) subdir_do DO=realclean "DODIRS=$(SUBDIRS)"
 533
 534 STAGESTUFF=${OBS} ${TSOBS} ${NTSOBS} ${ADD_FILES} init.c init.o version.c gdb
 535
 536 subdir_do: force
 537         for i in $(DODIRS); do \
 538                 if [ -d $(unsubdir)/$$i ] ; then \
 539                         if (cd $(unsubdir)/$$i$(subdir); \
 540                                 $(MAKE) \
 541                                         "against=$(against)" \
 542                                         "AR=$(AR)" \
 543                                         "CC=$(CC)" \
 544                                         "AR_FLAGS=$(AR_FLAGS)" \
 545                                         "RANLIB=$(RANLIB)" \
 546                                         "BISON=$(BISON)" $(DO)) ; then true ; \
 547                         else exit 1 ; fi ; \
 548                 else true ; fi ; \
 549         done
 550
 551 # Copy the object files from a particular stage into a subdirectory.
 552 stage1: force
 553         -mkdir stage1
 554         -mv -f $(STAGESTUFF) stage1
 555         $(MAKE) subdir_do DO=stage1 "DODIRS=$(SUBDIRS)"
 556
 557 stage2: force
 558         -mkdir stage2
 559         -mv -f $(STAGESTUFF) stage2
 560         $(MAKE) subdir_do DO=stage2 "DODIRS=$(SUBDIRS)"
 561
 562 stage3: force
 563         -mkdir stage3
 564         -mv -f $(STAGESTUFF) stage3
 565         $(MAKE) subdir_do DO=stage3 "DODIRS=$(SUBDIRS)"
 566
 567 against=stage2
 568
 569 comparison: force
 570         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 571         $(MAKE) subdir_do DO=comparison "DODIRS=$(SUBDIRS)"
 572
 573 de-stage1: force
 574         - (cd stage1 ; mv -f * ..)
 575         - rmdir stage1
 576         $(MAKE) subdir_do DO=de-stage1 "DODIRS=$(SUBDIRS)"
 577
 578 de-stage2: force
 579         - (cd stage2 ; mv -f * ..)
 580         - rmdir stage2
 581         $(MAKE) subdir_do DO=de-stage2 "DODIRS=$(SUBDIRS)"
 582
 583 de-stage3: force
 584         - (cd stage3 ; mv -f * ..)
 585         - rmdir stage3
 586         $(MAKE) subdir_do DO=de-stage3 "DODIRS=$(SUBDIRS)"
 587
 588 Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
 589         $(SHELL) ./config.status
 590
 591 force:
 592
 593 # Documentation!
 594 # GDB QUICK REFERENCE (TeX dvi file, CM fonts)
 595 refcard.dvi: $(srcdir)/doc/refcard.tex
 596         ( cd $(srcdir)/doc; $(MAKE) refcard.dvi )
 597         mv $(srcdir)/doc/refcard.dvi .
 598
 599 # GDB QUICK REFERENCE (PostScript output, common PS fonts)
 600 refcard.ps: $(srcdir)/doc/refcard.tex
 601         ( cd $(srcdir)/doc; $(MAKE) refcard.ps )
 602         mv $(srcdir)/doc/refcard.ps .
 603
 604 # GDB MANUAL: TeX dvi file
 605 gdb.dvi: $(srcdir)/doc/gdb-all.texi $(srcdir)/doc/rdl-apps.texi
 606         ( cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb.dvi )
 607         mv $(srcdir)/doc/gdb.dvi .
 608
 609 # GDB MANUAL: info file
 610 gdb.info: $(srcdir)/doc/gdb-all.texi
 611         ( cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb.info )
 612         mv $(srcdir)/doc/gdb.info* .
 613
 614 $(srcdir)/doc/gdb-all.texi:
 615         (cd $(srcdir)/doc; $(MAKE) M4=$(M4) gdb-all.texi)
 616 $(srcdir)/doc/rdl-apps.texi:
 617         (cd $(srcdir)/doc; $(MAKE) rdl-apps.texi)
 618
 619 # Make copying.c from COPYING
 620 copying.c: ${srcdir}/COPYING ${srcdir}/copying.awk
 621         awk -f ${srcdir}/copying.awk < ${srcdir}/COPYING > copying.c
 622
 623 version.c: Makefile.in
 624         echo 'char *version = "$(VERSION)";' >version.c
 625
 626 # c-exp.tab.c is generated in target dir from c-exp.y if it doesn't exist
 627 # in srcdir, then compiled in target dir to c-exp.tab.o.
 628 c-exp.tab.o: c-exp.tab.c
 629 c-exp.tab.c: $(srcdir)/c-exp.y
 630         @echo 'Expect 4 shift/reduce conflicts.'
 631         ${YACC} $(srcdir)/c-exp.y
 632         - mv y.tab.c c-exp.tab.c
 633
 634 # m2-exp.tab.c is generated in target dir from m2-exp.y if it doesn't exist
 635 # in srcdir, then compiled in target dir to m2-exp.tab.o.
 636 m2-exp.tab.o: m2-exp.tab.c
 637 m2-exp.tab.c: $(srcdir)/m2-exp.y
 638         ${YACC} $(srcdir)/m2-exp.y
 639         - mv y.tab.c m2-exp.tab.c
 640
 641 # The symbol-file readers have dependencies on BFD header files.
 642 dbxread.o: ${srcdir}/dbxread.c
 643         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/dbxread.c
 644
 645 coffread.o: ${srcdir}/coffread.c
 646         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/coffread.c
 647
 648 mipsread.o: ${srcdir}/mipsread.c
 649         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/mipsread.c
 650
 651 elfread.o: ${srcdir}/elfread.c
 652         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/elfread.c
 653
 654 xcoffread.o: ${srcdir}/xcoffread.c
 655         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffread.c
 656
 657 xcoffexec.o: ${srcdir}/xcoffexec.c
 658         ${CC} -c ${CFLAGS} -I$(BFD_DIR) ${srcdir}/xcoffexec.c
 659
 660 # Drag in the files that are in another directory.
 661
 662 xdr_ld.o: ${srcdir}/vx-share/xdr_ld.c
 663         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ld.c
 664
 665 xdr_ptrace.o: ${srcdir}/vx-share/xdr_ptrace.c
 666         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_ptrace.c
 667
 668 xdr_rdb.o: ${srcdir}/vx-share/xdr_rdb.c
 669         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_rdb.c
 670
 671 xdr_regs.o: ${srcdir}/vx-share/xdr_regs.c
 672         ${CC} -c ${CFLAGS} ${srcdir}/vx-share/xdr_regs.c
 673
 674 nindy.o: ${srcdir}/nindy-share/nindy.c
 675         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/nindy.c
 676
 677 Onindy.o: ${srcdir}/nindy-share/Onindy.c
 678         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/Onindy.c
 679
 680 ttybreak.o: ${srcdir}/nindy-share/ttybreak.c
 681         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttybreak.c
 682
 683 ttyflush.o: ${srcdir}/nindy-share/ttyflush.c
 684         ${CC} -c ${CFLAGS} ${srcdir}/nindy-share/ttyflush.c
 685
 686 lint: $(LINTFILES)
 687         $(LINT) $(INCLUDE_CFLAGS) $(LINTFLAGS) $(LINTFILES) \
 688            `echo ${DEPFILES} | sed 's/\.o /\.c /g'
 689
 690 gdb.cxref: $(SFILES)
 691         cxref -I. $(SFILES) >gdb.cxref
 692
 693 force_update:
 694
 695 # When used with GDB, the demangler should never look for leading
 696 # underscores because GDB strips them off during symbol read-in.  Thus
 697 # -Dnounderscore.
 698
 699 cplus-dem.o: cplus-dem.c
 700         ${CC} -c ${CFLAGS} -Dnounderscore \
 701           `echo ${srcdir}/cplus-dem.c | sed 's,^\./,,'`
 702
 703 # GNU Make has an annoying habit of putting *all* the Makefile variables
 704 # into the environment, unless you include this target as a circumvention.
 705 # Rumor is that this will be fixed (and this target can be removed)
 706 # in GNU Make 4.0.
 707 .NOEXPORT:
 708
 709 # This is the end of "Makefile.in".  When built into "Makefile"
 710 # by the configure script, two things are added below this point:
 711 #       alldeps.mak -- defintions of all files that are used in
 712 #                       host- or target-dependent configurations
 713 #       depend -- what .o files depend on what .c and .h files,
 714 #                       for all configurations.
 715
 716