1 /* Parameters for execution on a 68000 series machine.
2 Copyright 1986, 1987, 1989, 1990, 1992 Free Software Foundation, Inc.
4 This file is part of GDB.
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
20 /* Generic 68000 stuff, to be included by other tm-*.h files. */
24 /* Define the bit, byte, and word ordering of the machine. */
25 #define TARGET_BYTE_ORDER BIG_ENDIAN
27 /* Offset from address of function to start of its code.
28 Zero on most machines. */
30 #define FUNCTION_START_OFFSET 0
32 /* Advance PC across any function entry prologue instructions
33 to reach some "real" code. */
35 #if !defined(SKIP_PROLOGUE)
36 #define SKIP_PROLOGUE(ip) (m68k_skip_prologue (ip))
38 extern CORE_ADDR m68k_skip_prologue
PARAMS ((CORE_ADDR ip
));
40 /* Immediately after a function call, return the saved pc.
41 Can't always go through the frames for this because on some machines
42 the new frame is not set up until the new function executes
47 struct frame_saved_regs
;
50 extern CORE_ADDR m68k_saved_pc_after_call
PARAMS ((struct frame_info
*));
51 extern void m68k_find_saved_regs
PARAMS ((struct frame_info
*, struct frame_saved_regs
*));
53 #define SAVED_PC_AFTER_CALL(frame) \
54 m68k_saved_pc_after_call(frame)
56 /* Stack grows downward. */
58 #define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
60 /* Stack must be kept short aligned when doing function calls. */
62 #define STACK_ALIGN(ADDR) (((ADDR) + 1) & ~1)
64 /* Sequence of bytes for breakpoint instruction.
65 This is a TRAP instruction. The last 4 bits (0xf below) is the
66 vector. Systems which don't use 0xf should define BPT_VECTOR
67 themselves before including this file. */
69 #if !defined (BPT_VECTOR)
70 #define BPT_VECTOR 0xf
73 #if !defined (BREAKPOINT)
74 #define BREAKPOINT {0x4e, (0x40 | BPT_VECTOR)}
77 /* We default to vector 1 for the "remote" target, but allow targets
79 #if !defined (REMOTE_BPT_VECTOR)
80 #define REMOTE_BPT_VECTOR 1
83 #if !defined (REMOTE_BREAKPOINT)
84 #define REMOTE_BREAKPOINT {0x4e, (0x40 | REMOTE_BPT_VECTOR)}
87 /* If your kernel resets the pc after the trap happens you may need to
88 define this before including this file. */
90 #if !defined (DECR_PC_AFTER_BREAK)
91 #define DECR_PC_AFTER_BREAK 2
94 /* Say how long (ordinary) registers are. This is a piece of bogosity
95 used in push_word and a few other places; REGISTER_RAW_SIZE is the
96 real way to know how big a register is. */
98 #define REGISTER_SIZE 4
100 #define REGISTER_BYTES_FP (16*4 + 8 + 8*12 + 3*4)
101 #define REGISTER_BYTES_NOFP (16*4 + 8)
107 #define NUM_FREGS (NUM_REGS-24)
109 #ifndef REGISTER_BYTES_OK
110 #define REGISTER_BYTES_OK(b) \
111 ((b) == REGISTER_BYTES_FP \
112 || (b) == REGISTER_BYTES_NOFP)
115 #ifndef REGISTER_BYTES
116 #define REGISTER_BYTES (16*4 + 8 + 8*12 + 3*4)
119 /* Index within `registers' of the first byte of the space for
122 #define REGISTER_BYTE(N) \
123 ((N) >= FPC_REGNUM ? (((N) - FPC_REGNUM) * 4) + 168 \
124 : (N) >= FP0_REGNUM ? (((N) - FP0_REGNUM) * 12) + 72 \
127 /* Number of bytes of storage in the actual machine representation
128 for register N. On the 68000, all regs are 4 bytes
129 except the floating point regs which are 12 bytes. */
130 /* Note that the unsigned cast here forces the result of the
131 subtraction to very high positive values if N < FP0_REGNUM */
133 #define REGISTER_RAW_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 12 : 4)
135 /* Number of bytes of storage in the program's representation
136 for register N. On the 68000, all regs are 4 bytes
137 except the floating point regs which are 8-byte doubles. */
139 #define REGISTER_VIRTUAL_SIZE(N) (((unsigned)(N) - FP0_REGNUM) < 8 ? 8 : 4)
141 /* Largest value REGISTER_RAW_SIZE can have. */
143 #define MAX_REGISTER_RAW_SIZE 12
145 /* Largest value REGISTER_VIRTUAL_SIZE can have. */
147 #define MAX_REGISTER_VIRTUAL_SIZE 8
149 /* Nonzero if register N requires conversion
150 from raw format to virtual format. */
152 #define REGISTER_CONVERTIBLE(N) (((unsigned)(N) - FP0_REGNUM) < 8)
154 #include "floatformat.h"
156 /* Convert data from raw format for register REGNUM in buffer FROM
157 to virtual format with type TYPE in buffer TO. */
159 #define REGISTER_CONVERT_TO_VIRTUAL(REGNUM,TYPE,FROM,TO) \
162 DOUBLEST dbl_tmp_val; \
163 floatformat_to_doublest (&floatformat_m68881_ext, (FROM), &dbl_tmp_val); \
164 store_floating ((TO), TYPE_LENGTH (TYPE), dbl_tmp_val); \
167 /* Convert data from virtual format with type TYPE in buffer FROM
168 to raw format for register REGNUM in buffer TO. */
170 #define REGISTER_CONVERT_TO_RAW(TYPE,REGNUM,FROM,TO) \
173 DOUBLEST dbl_tmp_val; \
174 dbl_tmp_val = extract_floating ((FROM), TYPE_LENGTH (TYPE)); \
175 floatformat_from_doublest (&floatformat_m68881_ext, &dbl_tmp_val, (TO)); \
178 /* Return the GDB type object for the "standard" data type of data
179 in register N. This should be int for D0-D7, double for FP0-FP7,
180 and void pointer for all others (A0-A7, PC, SR, FPCONTROL etc).
181 Note, for registers which contain addresses return pointer to void,
182 not pointer to char, because we don't want to attempt to print
183 the string after printing the address. */
185 #define REGISTER_VIRTUAL_TYPE(N) \
186 ((unsigned) (N) >= FPC_REGNUM ? lookup_pointer_type (builtin_type_void) : \
187 (unsigned) (N) >= FP0_REGNUM ? builtin_type_double : \
188 (unsigned) (N) >= A0_REGNUM ? lookup_pointer_type (builtin_type_void) : \
191 /* Initializer for an array of names of registers.
192 Entries beyond the first NUM_REGS are ignored. */
194 #define REGISTER_NAMES \
195 {"d0", "d1", "d2", "d3", "d4", "d5", "d6", "d7", \
196 "a0", "a1", "a2", "a3", "a4", "a5", "fp", "sp", \
198 "fp0", "fp1", "fp2", "fp3", "fp4", "fp5", "fp6", "fp7", \
199 "fpcontrol", "fpstatus", "fpiaddr", "fpcode", "fpflags" }
201 /* Register numbers of various important registers.
202 Note that some of these values are "real" register numbers,
203 and correspond to the general registers of the machine,
204 and some are "phony" register numbers which are too large
205 to be actual register numbers as far as the user is concerned
206 but do serve to get the desired values when passed to read_register. */
211 #define FP_REGNUM 14 /* Contains address of executing stack frame */
212 #define SP_REGNUM 15 /* Contains address of top of stack */
213 #define PS_REGNUM 16 /* Contains processor status */
214 #define PC_REGNUM 17 /* Contains program counter */
215 #define FP0_REGNUM 18 /* Floating point register 0 */
216 #define FPC_REGNUM 26 /* 68881 control register */
217 #define FPS_REGNUM 27 /* 68881 status register */
218 #define FPI_REGNUM 28 /* 68881 iaddr register */
220 /* Store the address of the place in which to copy the structure the
221 subroutine will return. This is called from call_function. */
223 #define STORE_STRUCT_RETURN(ADDR, SP) \
224 { write_register (A1_REGNUM, (ADDR)); }
226 /* Extract from an array REGBUF containing the (raw) register state
227 a function return value of type TYPE, and copy that, in virtual format,
228 into VALBUF. This is assuming that floating point values are returned
229 as doubles in d0/d1. */
231 #if !defined (EXTRACT_RETURN_VALUE)
232 #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
235 (TYPE_LENGTH(TYPE) >= 4 ? 0 : 4 - TYPE_LENGTH(TYPE)), \
239 /* Write into appropriate registers a function return value
240 of type TYPE, given in virtual format. Assumes floats are passed
243 #if !defined (STORE_RETURN_VALUE)
244 #define STORE_RETURN_VALUE(TYPE,VALBUF) \
245 write_register_bytes (0, VALBUF, TYPE_LENGTH (TYPE))
248 /* Extract from an array REGBUF containing the (raw) register state
249 the address in which a function should return its structure value,
250 as a CORE_ADDR (or an expression that can be used as one). */
252 #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(CORE_ADDR *)(REGBUF))
254 /* Describe the pointer in each stack frame to the previous stack frame
257 /* FRAME_CHAIN takes a frame's nominal address and produces the frame's
259 In the case of the 68000, the frame's nominal address
260 is the address of a 4-byte word containing the calling frame's address. */
262 /* If we are chaining from sigtramp, then manufacture a sigtramp frame
263 (which isn't really on the stack. I'm not sure this is right for anything
264 but BSD4.3 on an hp300. */
265 #define FRAME_CHAIN(thisframe) \
266 (thisframe->signal_handler_caller \
268 : (!inside_entry_file ((thisframe)->pc) \
269 ? read_memory_integer ((thisframe)->frame, 4) \
272 /* Define other aspects of the stack frame. */
274 /* A macro that tells us whether the function invocation represented
275 by FI does not have a frame on the stack associated with it. If it
276 does not, FRAMELESS is set to 1, else 0. */
277 #define FRAMELESS_FUNCTION_INVOCATION(FI) \
278 (((FI)->signal_handler_caller) ? 0 : frameless_look_for_prologue(FI))
280 /* This was determined by experimentation on hp300 BSD 4.3. Perhaps
281 it corresponds to some offset in /usr/include/sys/user.h or
282 something like that. Using some system include file would
283 have the advantage of probably being more robust in the face
284 of OS upgrades, but the disadvantage of being wrong for
287 #define SIG_PC_FP_OFFSET 530
289 #define FRAME_SAVED_PC(FRAME) \
290 (((FRAME)->signal_handler_caller \
292 ? read_memory_integer ((FRAME)->next->frame + SIG_PC_FP_OFFSET, 4) \
293 : read_memory_integer (read_register (SP_REGNUM) \
294 + SIG_PC_FP_OFFSET - 8, 4) \
296 : read_memory_integer ((FRAME)->frame + 4, 4)) \
299 #define FRAME_ARGS_ADDRESS(fi) ((fi)->frame)
301 #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
303 /* Set VAL to the number of args passed to frame described by FI.
304 Can set VAL to -1, meaning no way to tell. */
306 /* We can't tell how many args there are
307 now that the C compiler delays popping them. */
308 #if !defined (FRAME_NUM_ARGS)
309 #define FRAME_NUM_ARGS(fi) (-1)
312 /* Return number of bytes at start of arglist that are not really args. */
314 #define FRAME_ARGS_SKIP 8
316 /* Put here the code to store, into a struct frame_saved_regs,
317 the addresses of the saved registers of frame described by FRAME_INFO.
318 This includes special registers such as pc and fp saved in special
319 ways in the stack frame. sp is even more special:
320 the address we return for it IS the sp for the next frame. */
322 #if !defined (FRAME_FIND_SAVED_REGS)
323 #define FRAME_FIND_SAVED_REGS(fi,fsr) m68k_find_saved_regs ((fi), &(fsr))
324 #endif /* no FIND_FRAME_SAVED_REGS. */
327 /* Things needed for making the inferior call functions. */
329 /* The CALL_DUMMY macro is the sequence of instructions, as disassembled
332 These instructions exist only so that m68k_find_saved_regs can parse
333 them as a "prologue"; they are never executed.
335 fmovemx fp0-fp7,sp@- 0xf227 0xe0ff
336 moveml d0-a5,sp@- 0x48e7 0xfffc
338 movew ccr,sp@- 0x42e7
340 The arguments are pushed at this point by GDB; no code is needed in
341 the dummy for this. The CALL_DUMMY_START_OFFSET gives the position
342 of the following jsr instruction. That is where we start
345 jsr @#0x32323232 0x4eb9 0x3232 0x3232
346 addal #0x69696969,sp 0xdffc 0x6969 0x6969
347 trap #<your BPT_VECTOR number here> 0x4e4?
350 Note this is CALL_DUMMY_LENGTH bytes (28 for the above example).
352 The dummy frame always saves the floating-point registers, whether they
353 actually exist on this target or not. */
355 /* FIXME: Wrong to hardwire this as BPT_VECTOR when sometimes it
356 should be REMOTE_BPT_VECTOR. Best way to fix it would be to define
357 CALL_DUMMY_BREAKPOINT_OFFSET. */
359 #define CALL_DUMMY {0xf227e0ff, 0x48e7fffc, 0x426742e7, 0x4eb93232, 0x3232dffc, 0x69696969, (0x4e404e71 | (BPT_VECTOR << 16))}
360 #define CALL_DUMMY_LENGTH 28 /* Size of CALL_DUMMY */
361 #define CALL_DUMMY_START_OFFSET 12 /* Offset to jsr instruction*/
362 #define CALL_DUMMY_BREAKPOINT_OFFSET (CALL_DUMMY_START_OFFSET + 12)
364 /* Insert the specified number of args and function address
365 into a call sequence of the above form stored at DUMMYNAME.
366 We use the BFD routines to store a big-endian value of known size. */
368 #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
369 { bfd_putb32 (fun, (unsigned char *) dummyname + CALL_DUMMY_START_OFFSET + 2); \
370 bfd_putb32 (nargs*4, (unsigned char *) dummyname + CALL_DUMMY_START_OFFSET + 8); }
372 /* Push an empty stack frame, to record the current PC, etc. */
374 #define PUSH_DUMMY_FRAME { m68k_push_dummy_frame (); }
376 extern void m68k_push_dummy_frame
PARAMS ((void));
378 extern void m68k_pop_frame
PARAMS ((void));
380 /* Discard from the stack the innermost frame, restoring all registers. */
382 #define POP_FRAME { m68k_pop_frame (); }
384 /* Offset from SP to first arg on stack at first instruction of a function */
386 #define SP_ARG0 (1 * 4)