1 /* Definitions to make GDB run on an encore under umax 4.2
2 Copyright 1987, 1989, 1991, 1993 Free Software Foundation, Inc.
4 This file is part of GDB.
6 This program is free software; you can redistribute it and/or modify
7 it under the terms of the GNU General Public License as published by
8 the Free Software Foundation; either version 2 of the License, or
9 (at your option) any later version.
11 This program is distributed in the hope that it will be useful,
12 but WITHOUT ANY WARRANTY; without even the implied warranty of
13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 GNU General Public License for more details.
16 You should have received a copy of the GNU General Public License
17 along with this program; if not, write to the Free Software
18 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
20 /* This is also included by tm-ns32km3.h, as well as being used by umax. */
22 #define TARGET_BYTE_ORDER LITTLE_ENDIAN
24 /* Need to get function ends by adding this to epilogue address from .bf
25 record, not using x_fsize field. */
26 #define FUNCTION_EPILOGUE_SIZE 4
28 /* Offset from address of function to start of its code.
29 Zero on most machines. */
31 #define FUNCTION_START_OFFSET 0
33 /* Advance PC across any function entry prologue instructions
34 to reach some "real" code. */
36 #define SKIP_PROLOGUE(pc) \
37 { register unsigned char op = read_memory_integer (pc, 1); \
38 if (op == 0x82) { op = read_memory_integer (pc+2,1); \
39 if ((op & 0x80) == 0) pc += 3; \
40 else if ((op & 0xc0) == 0x80) pc += 4; \
45 /* Immediately after a function call, return the saved pc.
46 Can't always go through the frames for this because on some machines
47 the new frame is not set up until the new function executes
50 #define SAVED_PC_AFTER_CALL(frame) \
51 read_memory_integer (read_register (SP_REGNUM), 4)
53 /* Address of end of stack space. */
55 #ifndef STACK_END_ADDR
56 #define STACK_END_ADDR (0xfffff000)
59 /* Stack grows downward. */
61 #define INNER_THAN(lhs,rhs) ((lhs) < (rhs))
63 /* Sequence of bytes for breakpoint instruction. */
65 #define BREAKPOINT {0xf2}
67 /* Amount PC must be decremented by after a breakpoint.
68 This is often the number of bytes in BREAKPOINT
71 #define DECR_PC_AFTER_BREAK 0
73 #if 0 /* Disable until fixed *correctly*. */
79 /* Return 1 if P points to an invalid floating point value. */
80 /* Surely wrong for cross-debugging. */
81 #define INVALID_FLOAT(p, s) \
82 ((s == sizeof (float))? \
83 NaF (*(float *) p) : \
85 #endif /* INVALID_FLOAT */
88 /* Say how long (ordinary) registers are. This is a piece of bogosity
89 used in push_word and a few other places; REGISTER_RAW_SIZE is the
90 real way to know how big a register is. */
92 #define REGISTER_SIZE 4
94 /* Number of machine registers */
98 #define NUM_GENERAL_REGS 8
100 /* Initializer for an array of names of registers.
101 There should be NUM_REGS strings in this initializer. */
103 #define REGISTER_NAMES {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \
104 "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7", \
105 "sp", "fp", "pc", "ps", \
107 "l0", "l1", "l2", "l3", "xx", \
110 /* Register numbers of various important registers.
111 Note that some of these values are "real" register numbers,
112 and correspond to the general registers of the machine,
113 and some are "phony" register numbers which are too large
114 to be actual register numbers as far as the user is concerned
115 but do serve to get the desired values when passed to read_register. */
117 #define R0_REGNUM 0 /* General register 0 */
118 #define FP0_REGNUM 8 /* Floating point register 0 */
119 #define SP_REGNUM 16 /* Contains address of top of stack */
120 #define AP_REGNUM FP_REGNUM
121 #define FP_REGNUM 17 /* Contains address of executing stack frame */
122 #define PC_REGNUM 18 /* Contains program counter */
123 #define PS_REGNUM 19 /* Contains processor status */
124 #define FPS_REGNUM 20 /* Floating point status register */
125 #define LP0_REGNUM 21 /* Double register 0 (same as FP0) */
127 /* Total amount of space needed to store our copies of the machine's
128 register state, the array `registers'. */
129 #define REGISTER_BYTES \
130 ((NUM_REGS - 4) * REGISTER_RAW_SIZE(R0_REGNUM) \
131 + 4 * REGISTER_RAW_SIZE(LP0_REGNUM))
133 /* Index within `registers' of the first byte of the space for
136 #define REGISTER_BYTE(N) ((N) >= LP0_REGNUM ? \
137 LP0_REGNUM * 4 + ((N) - LP0_REGNUM) * 8 : (N) * 4)
139 /* Number of bytes of storage in the actual machine representation
140 for register N. On the 32000, all regs are 4 bytes
141 except for the doubled floating registers. */
143 #define REGISTER_RAW_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4)
145 /* Number of bytes of storage in the program's representation
146 for register N. On the 32000, all regs are 4 bytes
147 except for the doubled floating registers. */
149 #define REGISTER_VIRTUAL_SIZE(N) ((N) >= LP0_REGNUM ? 8 : 4)
151 /* Largest value REGISTER_RAW_SIZE can have. */
153 #define MAX_REGISTER_RAW_SIZE 8
155 /* Largest value REGISTER_VIRTUAL_SIZE can have. */
157 #define MAX_REGISTER_VIRTUAL_SIZE 8
159 /* Return the GDB type object for the "standard" data type
160 of data in register N. */
162 #define REGISTER_VIRTUAL_TYPE(N) \
163 (((N) < FP0_REGNUM) ? \
165 ((N) < FP0_REGNUM + 8) ? \
166 builtin_type_float : \
167 ((N) < LP0_REGNUM) ? \
171 /* Store the address of the place in which to copy the structure the
172 subroutine will return. This is called from call_function.
174 On this machine this is a no-op, because gcc isn't used on it
175 yet. So this calling convention is not used. */
177 #define STORE_STRUCT_RETURN(ADDR, SP)
179 /* Extract from an array REGBUF containing the (raw) register state
180 a function return value of type TYPE, and copy that, in virtual format,
183 #define EXTRACT_RETURN_VALUE(TYPE,REGBUF,VALBUF) \
184 memcpy (VALBUF, REGBUF+REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 0), TYPE_LENGTH (TYPE))
186 /* Write into appropriate registers a function return value
187 of type TYPE, given in virtual format. */
189 #define STORE_RETURN_VALUE(TYPE,VALBUF) \
190 write_register_bytes (REGISTER_BYTE (TYPE_CODE (TYPE) == TYPE_CODE_FLT ? FP0_REGNUM : 0), VALBUF, TYPE_LENGTH (TYPE))
192 /* Extract from an array REGBUF containing the (raw) register state
193 the address in which a function should return its structure value,
194 as a CORE_ADDR (or an expression that can be used as one). */
196 #define EXTRACT_STRUCT_VALUE_ADDRESS(REGBUF) (*(int *)(REGBUF))
198 /* Describe the pointer in each stack frame to the previous stack frame
201 /* FRAME_CHAIN takes a frame's nominal address
202 and produces the frame's chain-pointer. */
204 /* In the case of the ns32000 series, the frame's nominal address is the FP
205 value, and at that address is saved previous FP value as a 4-byte word. */
207 #define FRAME_CHAIN(thisframe) \
208 (!inside_entry_file ((thisframe)->pc) ? \
209 read_memory_integer ((thisframe)->frame, 4) :\
212 /* Define other aspects of the stack frame. */
214 #define FRAME_SAVED_PC(FRAME) (read_memory_integer ((FRAME)->frame + 4, 4))
216 /* Compute base of arguments. */
218 #define FRAME_ARGS_ADDRESS(fi) \
219 ((ns32k_get_enter_addr ((fi)->pc) > 1) ? \
220 ((fi)->frame) : (read_register (SP_REGNUM) - 4))
222 #define FRAME_LOCALS_ADDRESS(fi) ((fi)->frame)
224 /* Get the address of the enter opcode for this function, if it is active.
225 Returns positive address > 1 if pc is between enter/exit,
226 1 if pc before enter or after exit, 0 otherwise. */
228 extern CORE_ADDR
ns32k_get_enter_addr ();
230 /* Return number of args passed to a frame.
231 Can return -1, meaning no way to tell.
232 Encore's C compiler often reuses same area on stack for args,
233 so this will often not work properly. If the arg names
234 are known, it's likely most of them will be printed. */
236 #define FRAME_NUM_ARGS(numargs, fi) \
238 CORE_ADDR enter_addr; \
240 unsigned int addr_mode; \
244 enter_addr = ns32k_get_enter_addr ((fi)->pc); \
245 if (enter_addr > 0) \
247 pc = (enter_addr == 1) ? \
248 SAVED_PC_AFTER_CALL (fi) : \
249 FRAME_SAVED_PC (fi); \
250 insn = read_memory_integer (pc,2); \
251 addr_mode = (insn >> 11) & 0x1f; \
252 insn = insn & 0x7ff; \
253 if ((insn & 0x7fc) == 0x57c && \
254 addr_mode == 0x14) /* immediate */ \
256 if (insn == 0x57c) /* adjspb */ \
258 else if (insn == 0x57d) /* adjspw */ \
260 else if (insn == 0x57f) /* adjspd */ \
262 numargs = read_memory_integer (pc+2,width); \
264 flip_bytes (&numargs, width); \
265 numargs = - sign_extend (numargs, width*8) / 4;\
270 /* Return number of bytes at start of arglist that are not really args. */
272 #define FRAME_ARGS_SKIP 8
274 /* Put here the code to store, into a struct frame_saved_regs,
275 the addresses of the saved registers of frame described by FRAME_INFO.
276 This includes special registers such as pc and fp saved in special
277 ways in the stack frame. sp is even more special:
278 the address we return for it IS the sp for the next frame. */
280 #define FRAME_FIND_SAVED_REGS(frame_info, frame_saved_regs) \
282 register int regmask, regnum; \
284 register CORE_ADDR enter_addr; \
285 register CORE_ADDR next_addr; \
287 memset (&(frame_saved_regs), '\0', sizeof (frame_saved_regs)); \
288 enter_addr = ns32k_get_enter_addr ((frame_info)->pc); \
289 if (enter_addr > 1) \
291 regmask = read_memory_integer (enter_addr+1, 1) & 0xff; \
292 localcount = ns32k_localcount (enter_addr); \
293 next_addr = (frame_info)->frame + localcount; \
294 for (regnum = 0; regnum < 8; regnum++, regmask >>= 1) \
295 (frame_saved_regs).regs[regnum] = (regmask & 1) ? \
296 (next_addr -= 4) : 0; \
297 (frame_saved_regs).regs[SP_REGNUM] = (frame_info)->frame + 4;\
298 (frame_saved_regs).regs[PC_REGNUM] = (frame_info)->frame + 4;\
299 (frame_saved_regs).regs[FP_REGNUM] = \
300 (read_memory_integer ((frame_info)->frame, 4));\
302 else if (enter_addr == 1) \
304 CORE_ADDR sp = read_register (SP_REGNUM); \
305 (frame_saved_regs).regs[PC_REGNUM] = sp; \
306 (frame_saved_regs).regs[SP_REGNUM] = sp + 4; \
310 /* Things needed for making the inferior call functions. */
312 /* Push an empty stack frame, to record the current PC, etc. */
314 #define PUSH_DUMMY_FRAME \
315 { register CORE_ADDR sp = read_register (SP_REGNUM);\
316 register int regnum; \
317 sp = push_word (sp, read_register (PC_REGNUM)); \
318 sp = push_word (sp, read_register (FP_REGNUM)); \
319 write_register (FP_REGNUM, sp); \
320 for (regnum = 0; regnum < 8; regnum++) \
321 sp = push_word (sp, read_register (regnum)); \
322 write_register (SP_REGNUM, sp); \
325 /* Discard from the stack the innermost frame, restoring all registers. */
328 { register struct frame_info *frame = get_current_frame (); \
329 register CORE_ADDR fp; \
330 register int regnum; \
331 struct frame_saved_regs fsr; \
332 struct frame_info *fi; \
334 get_frame_saved_regs (frame, &fsr); \
335 for (regnum = 0; regnum < 8; regnum++) \
336 if (fsr.regs[regnum]) \
337 write_register (regnum, read_memory_integer (fsr.regs[regnum], 4)); \
338 write_register (FP_REGNUM, read_memory_integer (fp, 4)); \
339 write_register (PC_REGNUM, read_memory_integer (fp + 4, 4)); \
340 write_register (SP_REGNUM, fp + 8); \
341 flush_cached_frames (); \
344 /* This sequence of words is the instructions
345 enter 0xff,0 82 ff 00
346 jsr @0x00010203 7f ae c0 01 02 03
347 adjspd 0x69696969 7f a5 01 02 03 04
349 Note this is 16 bytes. */
351 #define CALL_DUMMY { 0x7f00ff82, 0x0201c0ae, 0x01a57f03, 0xf2040302 }
353 #define CALL_DUMMY_START_OFFSET 3
354 #define CALL_DUMMY_LENGTH 16
355 #define CALL_DUMMY_ADDR 5
356 #define CALL_DUMMY_NARGS 11
358 /* Insert the specified number of args and function address
359 into a call sequence of the above form stored at DUMMYNAME. */
361 #define FIX_CALL_DUMMY(dummyname, pc, fun, nargs, args, type, gcc_p) \
364 flipped = fun | 0xc0000000; \
365 flip_bytes (&flipped, 4); \
366 *((int *) (((char *) dummyname)+CALL_DUMMY_ADDR)) = flipped; \
367 flipped = - nargs * 4; \
368 flip_bytes (&flipped, 4); \
369 *((int *) (((char *) dummyname)+CALL_DUMMY_NARGS)) = flipped; \
This page took 0.035965 seconds and 4 git commands to generate.