gdb/doc/ChangeLog

   1 2018-10-19  Tom Tromey  <tom@tromey.com>
   2
   3         PR tui/18388:
   4         * gdb.texinfo (TUI Commands): Remove tabset documentation.
   5         (TUI Configuration): Document "set tui tab-width".
   6
   7 2018-10-09  Tom Tromey  <tom@tromey.com>
   8
   9         * python.texi (Inferiors In Python): Link to "Frames In Python",
  10         not "Unwinding Frames in Python".
  11
  12 2018-10-09  Tom Tromey  <tom@tromey.com>
  13
  14         * gdb.texinfo (Configure Options): Update --enable-ubsan
  15         documentation.
  16
  17 2018-10-08  John Baldwin  <jhb@FreeBSD.org>
  18
  19         * gdb.texinfo (Contributors): Add SRI International and University
  20         of Cambridge for FreeBSD/riscv.
  21
  22 2018-10-06  Tom Tromey  <tom@tromey.com>
  23
  24         PR python/19399:
  25         * python.texi (Inferiors In Python): Document
  26         Inferior.Architecture.
  27
  28 2018-10-06  Tom Tromey  <tom@tromey.com>
  29
  30         PR python/21765:
  31         * python.texi (Symbols In Python): Document the module and
  32         common-block domains.  Remove documentation for incorrect
  33         domains.
  34
  35 2018-10-03  Tom Tromey  <tom@tromey.com>
  36
  37         * gdb.texinfo (Configure Options): Document --enable-ubsan.
  38
  39 2018-10-02  John Darrington <john@darrington.wattle.id.au>
  40
  41         * gdb.texinfo (Remote Connection Commands): Describe
  42           the changes to target remote and target extended-remote
  43           relating to Unix domain sockets.
  44
  45 2018-10-01  Tom Tromey  <tom@tromey.com>
  46
  47         * gdb.texinfo (Configure Options): Document configure options.
  48
  49 2018-09-29  Tom Tromey  <tom@tromey.com>
  50
  51         * gdb.texinfo (Requirements): Mention C++, GNU make.
  52         (Requirements): Sort the table.  Add more libraries.
  53         (Running Configure): Remove obsolete text.
  54         (Separate Objdir): Likewise.
  55         (Configure Options): Likewise.
  56
  57 2018-09-28  Andrew Burgess  <andrew.burgess@embecosm.com>
  58
  59         * gdb.texinfo (Frames): Rewrite the description of 'frame number'
  60         to highlight that the number is also the frame's level.
  61         (Selection): Rewrite documentation for 'frame' and 'select-frame'
  62         commands.
  63         (Frame Info): Rewrite documentation for 'info frame' command.
  64
  65 2018-09-23  Tom Tromey  <tom@tromey.com>
  66
  67         PR python/18852:
  68         * python.texi (Parameters In Python): Document exception behavior
  69         of get_set_string.
  70
  71 2018-09-18  John Baldwin  <jhb@FreeBSD.org>
  72
  73         * gdb.texinfo (info proc): Remove "running".
  74         (info proc mappings): Replace "program" with "process".
  75
  76 2018-09-18  John Baldwin  <jhb@FreeBSD.org>
  77
  78         * gdb.texinfo (Process Information): Document "info proc files"
  79         command.
  80
  81 2018-09-17  Tom Tromey  <tom@tromey.com>
  82
  83         * gdb.texinfo (Index Files): Update for cache directory change on
  84         macOS.
  85
  86 2018-09-16  Tom Tromey  <tom@tromey.com>
  87
  88         * python.texi (Basic Python): Update docs for find_pc_line,
  89         solib_name.
  90         (Progspaces In Python): Update docs for current_progspace.
  91         Document block_for_pc, find_pc_line, is_valid, nsolib_name.
  92         Move method documentation before example.
  93
  94 2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>
  95
  96         * python.texi (Objfiles In Python): Update gdb.objfiles() doc.
  97
  98 2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>
  99 2018-09-13  Tom Tromey  <tom@tromey.com>
 100
 101         * python.texi (Program Spaces In Python): Document the
 102         Progspace.objfiles method.
 103         (Objfiles In Python): Mention that gdb.objfiles() is identical
 104         to gdb.selected_inferior().progspace.objfiles().
 105
 106 2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>
 107 2018-09-13  Tom Tromey  <tom@tromey.com>
 108
 109         * python.texi (Inferiors In Python): Document
 110         Inferior.progspace.
 111         (Program Spaces In Python): Document that
 112         gdb.current_progspace() is the same as
 113         gdb.selected_inferior().progspace.
 114
 115 2018-09-13  Simon Marchi  <simon.marchi@ericsson.com>
 116
 117         * python.texi (Basic Python): Mention the string representation
 118         of GDB Python objects.
 119
 120 2018-09-12  Simon Marchi  <simon.marchi@ericsson.com>
 121
 122         * gdb.texinfo (Skipping Over Functions and Files): Document
 123         set/show debug skip.
 124
 125 2018-09-10  Tom Tromey  <tom@tromey.com>
 126
 127         * python.texi (Frames In Python, Blocks In Python)
 128         (Symbols In Python, Symbol Tables In Python)
 129         (Lazy Strings In Python): Remove periods from section titles.
 130
 131 2018-09-10  Tom Tromey  <tom@tromey.com>
 132
 133         * python.texi (Pretty Printing API): Swap sentence order.
 134
 135 2018-09-10  Tom Tromey  <tom@tromey.com>
 136
 137         PR python/16461:
 138         * python.texi (Values From Inferior): Mention use of virtual
 139         table.
 140
 141 2018-09-10  Tom Tromey  <tom@tromey.com>
 142
 143         * python.texi (Basic Python): Parenthesize argument to
 144         decode_line.
 145
 146 2018-09-10  Tom Tromey  <tom@tromey.com>
 147
 148         * python.texi (Python): Mention Python versions.  Don't mention
 149         execfile.
 150
 151 2018-09-10  Tom Tromey  <tom@tromey.com>
 152
 153         PR python/19808:
 154         * python.texi (Unwinding Frames in Python): Rewrite
 155         create_unwind_info documentation.  Update read_register
 156         documentation and add a note about unwinder caution.
 157
 158 2018-09-10  Tom Tromey  <tom@tromey.com>
 159
 160         PR python/18909:
 161         * python.texi (Events In Python): Fix inferior_call
 162         documentation.
 163
 164 2018-09-10  Tom Tromey  <tom@tromey.com>
 165
 166         PR python/17752:
 167         * python.texi (Frame Filter API): Remove period from subsection
 168         title.  Mention 100 as good default priority.
 169         (Frame Decorator API): Remove period from subsection title.
 170         Mention FrameDecorator module.
 171
 172 2018-09-10  Tom Tromey  <tom@tromey.com>
 173
 174         PR python/23108:
 175         * python.texi (Exception Handling): Rearrange gdb.GdbError text
 176         and add a table.
 177
 178 2018-09-10  Tom Tromey  <tom@tromey.com>
 179
 180         * gdb.texinfo (Compilation): Use "gcc", not "gcc.info", in @xref.
 181         (Machine Code): Use "binutils", not "binutils.info", in @pxref.
 182         (Separate Debug Files): Use "ld", not "ld.info", in @ref.
 183         * python.texi (Objfiles In Python): Use "ld", not "ld.info", in @ref.
 184
 185 2018-09-10  Tom Tromey  <tom@tromey.com>
 186
 187         PR python/16484:
 188         * python.texi (Frames In Python): Document that Frame.block can
 189         throw.
 190
 191 2018-09-10  Tom Tromey  <tom@tromey.com>
 192
 193         PR python/23487:
 194         * gdb.texinfo (Pretty-Printer Commands): Fix typo in example.
 195
 196 2018-09-10  Tom Tromey  <tom@tromey.com>
 197
 198         PR python/16033:
 199         * python.texi (Blocks In Python): Document that Block.end is
 200         exclusive.
 201
 202 2018-08-29  Keith Seitz  <keiths@redhat.com>
 203
 204         * gdb.texinfo (Compiling and injecting code in GDB): Document
 205         set/show "compile-oracle" and "compile-cplus-types" commands.
 206
 207 2018-08-22  Jan Vrany  <jan.vrany@fit.cvut.cz>
 208
 209         * gdb.texinfo (The -stack-list-frames Command): Update description
 210         to mention "arch".
 211         Update MI examples throughout the document to contain "arch" in
 212         frame output.
 213
 214 2018-08-21  Alan Hayward  <alan.hayward@arm.com>
 215
 216         * gdb.texinfo (AArch64 SVE): New subsubsection.
 217
 218 2018-08-14  Jan Vrany  <jan.vrany@fit.cvut.cz>
 219
 220         * gdb.texinfo (GDB/MI Data Manipulation): Document
 221         "-data-disassemble -a addr".
 222         (GDB/MI Support Commands): Document "data-disassemble-a-option"
 223         feature.
 224
 225 2018-08-07  Simon Marchi  <simon.marchi@ericsson.com>
 226
 227         * gdb.texinfo (Index Files Speed Up GDB): Add section about
 228         symbol index cache.
 229
 230 2018-07-27  Sergio Durigan Junior  <sergiodj@redhat.com>
 231
 232         * gdb.texinfo (gcore man): Rewrite "Description" and "-o"
 233         option sections to further clarify that gcore can take more
 234         than one PID, and that "-o" is used to specify a prefix, not a
 235         filename.
 236
 237 2018-07-26  Andrew Burgess  <andrew.burgess@embecosm.com>
 238
 239         * gdb.texinfo (Maintenance Commands): Add description of
 240         maintenance command to control dwarf unwinders.
 241
 242 2018-07-12  Philippe Waroquiers  <philippe.waroquiers@skynet.be>
 243
 244         * gdb.texinfo (Debugging Programs with Multiple Threads):
 245         Document changes to 'thread apply'.  Document 'taas'.
 246         Document 'tfaas'.
 247         (Examining the Stack): Document 'frame apply'.  Document 'faas'.
 248
 249 2018-07-11  Sergio Durigan Junior  <sergiodj@redhat.com>
 250             Jan Kratochvil  <jan.kratochvil@redhat.com>
 251             Paul Fertser  <fercerpav@gmail.com>
 252             Tsutomu Seki  <sekiriki@gmail.com>
 253
 254         * gdb.texinfo (Remote Connection Commands): Add explanation
 255         about new IPv6 support.  Add new connection prefixes.
 256
 257 2018-07-09  Andrew Burgess  <andrew.burgess@embecosm.com>
 258
 259         * gdb.texinfo (Remote Configuration): Update descriptions for
 260         set/show of hardware-watchpoint-limit, hardware-breakpoint-limit,
 261         and hardware-watchpoint-length-limit variables.
 262
 263 2018-07-02  Maciej W. Rozycki  <macro@mips.com>
 264
 265         PR tdep/8282
 266         * gdb.texinfo (Source and Machine Code): Document `set
 267         disassembler-options' support for the MIPS target.
 268
 269 2018-06-28  Petr Tesarik  <ptesarik@suse.cz>
 270
 271         * gdb.texinfo (Files): Document "add-symbol-file -o offset".
 272
 273 2018-06-28  Petr Tesarik  <ptesarik@suse.cz>
 274
 275         * gdb.texinfo (Files): The address argument for "add-symbol-file"
 276         is no longer mandatory.
 277
 278 2018-06-28  Petr Tesarik  <ptesarik@suse.cz>
 279
 280         * gdb.texinfo (Files): Document "symbol-file -o offset".
 281
 282 2018-06-14  Tom de Vries  <tdevries@suse.de>
 283
 284         * gdb.texinfo (Background Execution): Add @cindex for '&'.
 285
 286 2018-06-11  Eli Zaretskii  <eliz@gnu.org>
 287
 288         * gdb.texinfo (Maintenance Commands): Add a missing @anchor.
 289
 290 2018-06-08  Gary Benson <gbenson@redhat.com>
 291
 292         * gdb.texinfo (Maintenance Commands): Document "maint check
 293         libthread-db" and "maint set/show check-libthread-db".
 294
 295 2018-06-05  Tom Tromey  <tom@tromey.com>
 296
 297         PR cli/12326:
 298         * gdb.texinfo (Screen Size): Document "c" response to pagination
 299         prompt.
 300
 301 2018-05-31  Maciej W. Rozycki  <macro@mips.com>
 302
 303         * gdb.texinfo (Choosing Target Byte Order): Document endianness
 304         selection details with the `set endian auto' mode.
 305
 306 2018-05-04  Tom Tromey  <tom@tromey.com>
 307
 308         PR python/22731:
 309         * python.texi (Breakpoints In Python): Mention that "commands" is
 310         writable.
 311
 312 2018-05-02  Tom Tromey  <tom@tromey.com>
 313
 314         PR python/20084:
 315         * python.texi (Parameters In Python): Document PARAM_ZUINTEGER and
 316         PARAM_ZUINTEGER_UNLIMITED.
 317
 318 2018-04-30  Tom Tromey  <tom@tromey.com>
 319
 320         * python.texi (Types In Python): Document Type.align.
 321
 322 2018-04-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 323
 324         * gdb.texinfo (Symbols): Mention the fact that "info
 325         variables/functions/types" show source files and line numbers.
 326
 327 2018-04-13  Markus Metzger  <markus.t.metzger@intel.com>
 328
 329         * gdb.texinfo: Document set/show record btrace cpu.
 330
 331 2018-03-27  Joel Brobecker  <brobecker@adacore.com>
 332
 333         * gdb.texinfo (Ada Settings): New subsubsection.
 334
 335 2018-03-26  Tom Tromey  <tom@tromey.com>
 336
 337         PR backtrace/15582:
 338         * gdb.texinfo (Backtrace): Mention "hide" argument.
 339
 340 2018-03-26  Tom Tromey  <tom@tromey.com>
 341
 342         * gdb.texinfo (Backtrace): Describe options individually.
 343
 344 2018-03-19  Tom Tromey  <tom@tromey.com>
 345
 346         * observer.texi: Remove.
 347
 348 2018-03-04  John Baldwin  <jhb@FreeBSD.org>
 349
 350         * gdb.texinfo (Debugging Output): Document "set/show debug
 351         fbsd-nat".
 352
 353 2018-02-19  Andrew Burgess  <andrew.burgess@embecosm.com>
 354
 355         * gdb.texinfo (Machine Code): Additional information about "info
 356         line" command.
 357
 358 2018-01-15  Szabolcs Nagy  <szabolcs.nagy@arm.com>
 359
 360         * gdb.texinfo (gdb-add-index man): Add pindex.
 361
 362 2018-01-15  Szabolcs Nagy  <szabolcs.nagy@arm.com>
 363
 364         * gdb.texinfo (set cwd): Add period.
 365         (gdb-add-index man): Move anchor.
 366
 367 2017-01-12  Tom Tromey  <tom@tromey.com>
 368             Sergio Durigan Junior  <sergiodj@redhat.com>
 369
 370         * gdb.texinfo (Index Files): Mention gdb-add-index.
 371         (gdb-add-index man): New section.
 372         * Makefile.in (gdb-add-index.1): New rule to generate manpage
 373         from gdb.texinfo.
 374
 375 2018-01-11  Szabolcs Nagy  <szabolcs.nagy@arm.com>
 376
 377         * gdb.texinfo (pwd): Fix whitespace.
 378
 379 2018-01-09  John Baldwin  <jhb@FreeBSD.org>
 380
 381         * gdb.texinfo (pwd): Update cross-reference for Process Information
 382         node and remove explicit /proc reference.
 383         (Native): Rename subsection from SVR4 Process Information to
 384         Process Information.
 385         (Process Information): Reword introduction to be less /proc
 386         centric.  Document support for "info proc" on FreeBSD.
 387
 388 2018-01-03  Xavier Roirand  <roirand@adacore.com>
 389
 390         * gdb.texinfo (Set Catchpoints): Add documentation for new
 391         "catch handlers" action.
 392
 393 2017-12-27  Stafford Horne  <shorne@gmail.com>
 394
 395         * gdb.texinfo (Target Description Format): Explain that arbitrary
 396         strings are now allowed for register groups.
 397
 398 2017-12-27  Stafford Horne  <shorne@gmail.com>
 399
 400         * gdb.texinfo (Registers): Document info reg $reggroup feature.
 401
 402 2017-12-15  Sergio Durigan Junior  <sergiodj@redhat.com>
 403
 404         PR cli/16224
 405         * gdb.texinfo (ptype): Add documentation for new flag '/o'.
 406
 407 2017-12-13  Simon Marchi  <simon.marchi@ericsson.com>
 408
 409         * python.texi (Manipulating breakpoints using Python): Document
 410         qualified parameter to gdb.Breakpoint.
 411
 412 2017-12-13  Simon Marchi  <simon.marchi@ericsson.com>
 413
 414         * python.texi (Manipulating breakpoints using Python): Split doc
 415         of Breakpoint.__init__ in two, split text in multiple
 416         paragraphs, don't nest parameter square brackets.
 417
 418 2017-12-12  Stafford Horne  <shorne@gmail.com>
 419             Stefan Wallentowitz  <stefan@wallentowitz.de>
 420             Franck Jullien  <franck.jullien@gmail.com>
 421             Jeremy Bennett  <jeremy.bennett@embecosm.com>
 422
 423         * gdb.texinfo: Add OpenRISC documentation.
 424
 425 2017-12-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
 426
 427         * gdb.texinfo (Index Files): Document .debug_names and -dwarf-5.
 428
 429 2017-12-07  Keith Seitz  <keiths@redhat.com>
 430
 431         * gdb.texinfo (Symbols): Document "set print type nested-type-limit"
 432         and "show print type nested-type-limit".
 433
 434 2017-12-07  Phil Muldoon  <pmuldoon@redhat.com>
 435
 436        * python.texi (Breakpoints In Python): Add text relating
 437         to allowed explicit locations and keywords in gdb.Breakpoints.
 438
 439 2017-12-04  Tom Tromey  <tom@tromey.com>
 440
 441         * gdb.texinfo (Rust): Update trait object status
 442
 443 2017-12-01  Andrew Cagney  <cagney@redhat.com>
 444             Joel Brobecker  <brobecker@adacore.com>
 445             Sergio Durigan Junior  <sergiodj@redhat.com>
 446
 447         * gdb.texinfo (File Options): Document --readnever.
 448         (Commands to Specify Files): Likewise, for 'symbol-file' and
 449         'add-symbol-file'.
 450
 451 2017-11-29  Pedro Alves  <palves@redhat.com>
 452
 453         PR c++/19436
 454         * gdb.texinfo (Debugging C Plus Plus): Document setting
 455         breakpoints in functions with ABI tags.
 456
 457 2017-11-29  Pedro Alves  <palves@redhat.com>
 458
 459         * gdb.texinfo (Linespec Locations): Document how "function" is
 460         interpreted in C++ and Ada.  Document "-qualified".
 461         (Explicit Locations): Document how "-function" is interpreted in
 462         C++ and Ada.  Document "-qualified".
 463
 464 2017-11-26  Dominik Czarnota  <dominik.b.czarnota@gmail.com>
 465
 466         PR gdb/21945
 467         * gdb.texinfo (Search Memory): Update description and example
 468         about how to search a string without NULL terminator.
 469
 470 2017-11-24  Joel Brobecker  <brobecker@adacore.com>
 471
 472         * gdb.texinfo (GDB/MI Ada Exception Information): Document
 473         new "exception-message" field.
 474
 475 2017-11-24  Simon Marchi  <simon.marchi@ericsson.com>
 476
 477         * gdb.texinfo (Memory Map Format): Update gdb-memory-map.dtd.
 478
 479 2017-11-24  Pedro Alves  <palves@redhat.com>
 480
 481         * gdb.texinfo (Completion): Update need-quoting examples.  Remove
 482         false claim that GDB inserts quoting automatically.
 483         (Symbols): Add anchor.
 484
 485 2017-11-22  Ulrich Weigand  <uweigand@de.ibm.com>
 486
 487         * gdb.texinfo (Requirements): Document use of GNU MPFR.
 488
 489 2017-11-16  Phil Muldoon  <pmuldoon@redhat.com>
 490
 491         * python.texi (Basic Python): Add rbreak documentation.
 492
 493 2017-11-07  Xavier Roirand  <roirand@adacore.com>
 494             Pedro Alves  <palves@redhat.com>
 495
 496         * gdb.texinfo (Set Breaks): Document support for breakpoint
 497         location ranges in the enable/disable commands.
 498
 499 2017-10-04  Sergio Durigan Junior  <sergiodj@redhat.com>
 500
 501         * gdb.texinfo (Starting your Program) <The working directory.>:
 502         Mention remote debugging.
 503         (Working Directory) <Your Program's Working Directory>:
 504         Likewise.
 505         (Connecting) <Remote Packet>: Add "set-working-dir"
 506         and "QSetWorkingDir" to the table.
 507         (Remote Protocol) <QSetWorkingDir>: New item, explaining the
 508         packet.
 509
 510 2017-10-04  Sergio Durigan Junior  <sergiodj@redhat.com>
 511
 512         * gdb.texinfo (Starting your Program) <The working directory.>:
 513         Mention new "set cwd" command.
 514         (Working Directory) <Your Program's Working Directory>:
 515         Rephrase to explain that "set cwd" exists and is the default
 516         way to change the inferior's cwd.
 517
 518 2017-09-25  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 519
 520         * gdb.texinfo (S/390 and System z Features): Document the new
 521         features org.gnu.gdb.s390.gs and org.gnu.gdb.s390.gsbc.
 522
 523 2017-09-21  Kevin Buettner  <kevinb@redhat.com>
 524
 525         * gdb.texinfo (qXfer:threads:read): Add documentation for handle
 526         attribute.
 527
 528 2017-09-21  Kevin Buettner  <kevinb@redhat.com>
 529
 530         * python.texi (Inferiors In Python): Add description for method
 531         Inferior.thread_from_thread_handle.
 532
 533 2017-09-19  John Baldwin  <jhb@FreeBSD.org>
 534
 535         * gdb.texinfo (Starting your Program): Add description of
 536         starti command.  Mention starti command as an alternative for
 537         debugging the elaboration phase.
 538
 539 2017-09-16  Simon Marchi  <simon.marchi@ericsson.com>
 540
 541         * gdb.texinfo (Maintenance Commands): Document filter parameter
 542         of "maint selftest".  Document "maint info selftests" command.
 543
 544 2017-09-11  Tom Tromey  <tom@tromey.com>
 545
 546         * python.texi (Events In Python): Document new events.
 547
 548 2017-09-04  Pedro Alves  <palves@redhat.com>
 549
 550         * gdb.texinfo (Variables) <Program Variables>: Document inspecting
 551         no-debug-info variables.
 552         (Symbols) <Examining the Symbol Table>: Document inspecting
 553         no-debug-info types.
 554         (Calling) <Calling functions with no debug info>: New subsection,
 555         documenting calling no-debug-info functions.
 556         (Non-debug DLL Symbols) <Working with Minimal Symbols>: Update.
 557
 558 2017-08-31  Sergio Durigan Junior  <sergiodj@redhat.com>
 559
 560         * gdb.texinfo (set environment): Add @anchor.  Explain that
 561         environment variables set by the user are sent to GDBserver.
 562         (unset environment): Likewise, but for unsetting variables.
 563         (Connecting) <Remote Packet>: Add "environment-hex-encoded",
 564         "QEnvironmentHexEncoded", "environment-unset", "QEnvironmentUnset",
 565         "environment-reset" and "QEnvironmentReset" to the table.
 566         (Remote Protocol) <QEnvironmentHexEncoded, QEnvironmentUnset,
 567         QEnvironmentReset>: New item, explaining the packet.
 568
 569 2017-08-23  Jan Kratochvil  <jan.kratochvil@redhat.com>
 570
 571         * gdb.texinfo (Compiling and Injecting Code): Add to subsection
 572         "Compiler search for the compile command" descriptions of set
 573         compile-gcc and show compile-gcc.
 574
 575 2017-08-07  Weimin Pan  <weimin.pan@oracle.com>
 576
 577         * gdb.texinfo (Architectures): Add new Sparc64 section to document
 578         ADI support.
 579         * NEWS: Add "adi examine" and "adi assign" commands.
 580
 581 2017-08-18  Yao Qi  <yao.qi@linaro.org>
 582
 583         * gdb.texinfo (Server): Document "--selftest".
 584
 585 2017-08-16  Ruslan Kabatsayev  <b7.10110111@gmail.com>
 586
 587         * gdb.texinfo (TUI Single Key Mode): Document the new shortcuts in
 588         Single-Key mode.
 589
 590 2017-08-12  Sergio Durigan Junior  <sergiodj@redhat.com>
 591
 592         PR gdb/21925
 593         * gdb.texinfo (Starting) <startup-with-shell>: Fix typo ("show
 594         set...").
 595
 596 2017-08-09  Simon Marchi  <simon.marchi@ericsson.com>
 597
 598         * gdb.texinfo (Packets): Fix Z0 cmd_list doc referring to
 599         conditional expression.
 600
 601 2017-07-31  Simon Marchi  <simon.marchi@ericsson.com>
 602
 603         * agentexpr.texi (rot): Fix symbolic description, improve
 604         textual description.
 605
 606 2017-07-26  Yao Qi  <yao.qi@linaro.org>
 607
 608         * gdb.texinfo (Maintenance Commands): Document command
 609         "maint check xml-descriptions".
 610
 611 2017-07-26  Yao Qi  <yao.qi@linaro.org>
 612
 613         * gdb.texinfo (Maintenance Commands): Document optional
 614         argument of "maint print c-tdesc".
 615
 616 2017-07-18  Yao Qi  <yao.qi@linaro.org>
 617
 618         * gdb.texinfo (Maintenance Commands): Improve the doc to
 619         command "maint print c-tdesc".
 620
 621 2017-06-20  Sergio Durigan Junior  <sergiodj@redhat.com>
 622
 623         PR gdb/21606
 624         * python.texi (Python representation of Symbols.): Replace
 625         SYMBOL_FUNCTION_DOMAIN by SYMBOL_FUNCTIONS_DOMAIN, fixing typo.
 626         * guile.texi (Guile representation of Symbols.): Likewise.
 627
 628 2017-06-11  Simon Marchi  <simon.marchi@ericsson.com>
 629
 630         * gdb.texinfo (Optional Messages about Internal Happenings):
 631         Document {set,show} debug separate-debug-file commands.
 632
 633 2017-06-07  Sergio Durigan Junior  <sergiodj@redhat.com>
 634
 635         * gdb.texinfo (Starting) <startup-with-shell>: Add @anchor.
 636         (Connecting) <Remote Packet>: Add "startup-with-shell"
 637         and "QStartupWithShell" to the table.
 638         (Remote Protocol) <QStartupWithShell>: New item, explaining the
 639         packet.
 640
 641 2017-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>
 642
 643         * gdb.texinfo (Packets): Document vMustReplyEmpty packet.
 644
 645 2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>
 646
 647         * python.texi (Recording in Python): Factor out the documentation of
 648         gdb.RecordInstruction's super class.
 649
 650 2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>
 651
 652         * python.texi (Recording in Python): Replace gdb.BtraceFunction with
 653         gdb.RecordFunctionSegment.  Rename prev_sibling and next_sibling to
 654         prev and next.
 655
 656 2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>
 657
 658         * python.texi (Recording in Python): Replace gdb.BtraceInstruction with
 659         gdb.RecordInstruction
 660
 661 2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>
 662
 663         * python.texi (Recording in Python): Add documentation for
 664         gdb.RecordGap and remove documentation of special cases for
 665         gdb.BtraceInstruction.
 666
 667 2017-05-01  Tim Wiederhake  <tim.wiederhake@intel.com>
 668
 669         * python.texi (Recording in Python): Remove Record.ptid defvar.
 670
 671 2017-04-21  Simon Marchi  <simon.marchi@ericsson.com>
 672
 673         * gdb.texinfo (GDB/MI Thread Information): Add missing
 674         fields, re-word some things.
 675         (GDB/MI Thread Commands): Describe fields found in the output of
 676         -thread-info, remove description of fields in the
 677         thread output tuple, replace with a cross-reference to "GDB/MI
 678         Thread Information".
 679
 680 2017-04-21  Simon Marchi  <simon.marchi@ericsson.com>
 681
 682         * gdb.texinfo (GDB/MI Thread Commands): Remove "current" field
 683         from -thread-info output.
 684
 685 2017-03-28  Anton Kolesov  <anton.kolesov@synopsys.com>
 686
 687         * gdb.texinfo (Synopsys ARC): Document "set debug arc 2".
 688
 689 2017-03-28  Anton Kolesov  <anton.kolesov@synopsys.com>
 690
 691         * gdb.texinfo (Synopsys ARC): Add "maint print arc arc-instruction".
 692
 693 2017-03-22  Yao Qi  <yao.qi@linaro.org>
 694
 695         * python.texi (Inferiors In Python): Remove @code from Python.
 696
 697 2017-03-21  Tim Wiederhake  <tim.wiederhake@intel.com>
 698
 699         * python.texi (Recordings In Python): Document return type of
 700         gdb.BtraceInstruction.data.
 701
 702 2017-03-20  Marc-Andre Laperle  <marc-andre.laperle@ericsson.com>
 703
 704         * gdb.texinfo (gdb/mi Symbol Query Commands): Document new MI
 705         command file-list-shared-libraries
 706         (GDB/MI Async Records): Update documentation of library-loaded with new
 707         field.
 708
 709 2017-03-16  Doug Evans  <dje@google.com>
 710
 711         * guile.texi (Lazy Strings In Guile): Mention arrays.
 712         * python.texi (Lazy Strings In Python): Ditto.
 713
 714 2017-03-08  Jiong Wang  <jiong.wang@arm.com>
 715
 716         * gdb.texinfo (Memory Protection Extensions): Add missing escape
 717         character "@".
 718
 719 2017-03-07  Walfred Tedeschi <walfred.tedeschi@intel.com>
 720
 721         * Memory Protection Extensions: Add information about inferior
 722         calls.
 723
 724 2017-02-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
 725
 726         * gdb.texinfo (Print Settings, Tail Call Frames): Rename DW_OP_GNU_*,
 727         DW_TAG_GNU_* and DW_AT_GNU_*.
 728
 729 2017-02-14  Tim Wiederhake  <tim.wiederhake@intel.com>
 730
 731         * python.texi (Recordings In Python): New section.
 732
 733 2017-02-14  Tom Tromey  <tom@tromey.com>
 734
 735         PR python/13598:
 736         * python.texi (Events In Python): Document events.before_prompt.
 737
 738 2017-02-13  Luis Machado  <lgustavo@codesourcery.com>
 739
 740         * gdb.texinfo (Target Commands): Document the optional offset
 741         argument for the load command.
 742
 743 2017-02-10  Martin Galvan  <martingalvan@sourceware.org>
 744
 745         PR gdb/21122
 746         * gdb.texinfo (Breakpoints): Reword documentation to speak in terms of
 747         space-separated breakpoint lists.  Also add a missing @table command
 748         and @cindex for breakpoint lists.
 749
 750 2017-02-06  Ivo Raisr  <ivo.raisr@oracle.com>
 751
 752         PR tdep/20936
 753         * gdb.texinfo: (Standard Target Features): Document SPARC features.
 754         (Sparc Features): New node.
 755
 756 2017-01-27  Walfred Tedeschi  <walfred.tedeschi@intel.com>
 757
 758         * gdb.texinfo (i386 Features): Add system segment registers
 759         as feature.
 760
 761 2017-01-24  Simon Marchi  <simon.marchi@ericsson.com>
 762
 763         * python.texi (Events In Python): Fix typo.
 764
 765 2017-01-20  Mike Wrighton  <mike_wrighton@codesourcery.com>
 766             Luis Machado  <lgustavo@codesourcery.com>
 767
 768         * gdb.texinfo (-target-flash-erase): New MI command description.
 769         (flash-erase): New CLI command description.
 770
 771 2017-01-04  John Baldwin  <jhb@FreeBSD.org>
 772
 773         * gdb.texinfo (Contributors): Add SRI International and University
 774         of Cambridge for FreeBSD/mips.
 775
 776 2016-12-22  Doug Evans  <xdje42@gmail.com>
 777
 778         * gdb.texinfo (Symbols): Update docs for symbol printing maintenance
 779         commands.
 780
 781 2016-12-02  Pedro Alves  <palves@redhat.com>
 782
 783         * gdb.texinfo (User-defined Commands): Limit on number of
 784         arguments passed to user-defined commands removed; update.
 785
 786 2016-12-02  Pedro Alves  <palves@redhat.com>
 787
 788         PR cli/20559
 789         * gdb.texinfo (Define): Add example of using "eval" to process a
 790         variable number of arguments.
 791         (Output) <eval>: Add anchor.
 792
 793 2016-11-30  Simon Marchi  <simon.marchi@polymtl.ca>
 794
 795         * Makefile.in: Likewise.
 796
 797 2016-11-18  Andreas Arnez  <arnez@linux.vnet.ibm.com>
 798
 799         * gdb.texinfo (GDB/MI Async Records): Add missing comma after
 800         xref.
 801
 802 2016-10-29  Pedro Alves  <palves@redhat.com>
 803
 804         * gdb.texinfo (Packets) <vCont>: Remove mention of default
 805         actions.
 806
 807 2016-10-26  Pedro Alves  <palves@redhat.com>
 808
 809         * gdb.texinfo (Packets): Clarify vCont packets with multiple
 810         actions that match a thread, and what happens when an action
 811         matches a thread that is already running.
 812
 813 2016-10-14  Simon Marchi  <simon.marchi@ericsson.com>
 814
 815         * gdb.texinfo (Using Trace Files): Fix typo.
 816         (GDB/MI Tracepoint Commands): Likewise.
 817
 818 2016-10-14  Simon Marchi  <simon.marchi@ericsson.com>
 819
 820         * gdb.texinfo (GDB/MI Tracepoint Commands): Document -ctf switch
 821         of -trace-save.
 822
 823 2016-10-06  Tom Tromey  <tom@tromey.com>
 824
 825         * guile.texi (Types In Guile): Remove Java mentions.
 826         * python.texi (Types In Python): Remove Java mentions.
 827         * gdb.texinfo (Address Locations, Supported Languages)
 828         (Index Section Format): Remove Java mentions.
 829
 830 2016-08-15  Doug Evans  <dje@google.com>
 831
 832         * gdb.texinfo (Target Description Format): Update docs on "end"
 833         field spec and field default type.
 834
 835 2016-10-03  Antoine Tremblay  <antoine.tremblay@ericsson.com>
 836 2016-10-03  Simon Marchi  <simon.marchi@ericsson.com>
 837
 838         PR gdb/20487
 839         * gdb.texinfo (Context management): Update mention of frame
 840         change notifications.
 841         (gdb/mi Async Records): Document frame field in
 842         =thread-select event.
 843         * observer.texi (GDB Observers): New user_selected_context_changed
 844         observer.
 845
 846 2016-09-28  Tom Tromey  <tom@tromey.com>
 847
 848         * gdb.texinfo (Packets) <z0>: Use "software breakpoint" rather
 849         than "memory breakpoint".  Further document "kind".  Move
 850         protocol-details link earlier.
 851         <z1>: Document the cmd_list argument.  Fix typo.
 852         <g>: Remove incorrect sentence.
 853         (Stop Reply Packets): Document "OK" response to requests when in
 854         non-stop mode.
 855         <swbreak>: Use "software breakpoint" rather than "memory
 856         breakpoint".
 857         <create>: Document that "R" is ignored.
 858         <W, X, w>: Document formatting of "AA".
 859         (Notification Packets): Use "%Stop", not "%%Stop".
 860
 861 2016-09-21  Anton Kolesov  <anton.kolesov@synopsys.com>
 862
 863         * gdb.texinfo (Embedded Processors): Document ARC.
 864         (Synopsys ARC): New section.
 865         (Standard Target Features): Document ARC features.
 866         (ARC Features): New section.
 867
 868 2016-09-21  Simon Marchi  <simon.marchi@ericsson.com>
 869
 870         * .gitignore: New file.
 871
 872 2016-08-24  Simon Marchi  <simon.marchi@ericsson.com>
 873
 874         * gdb.texinfo (Input/Output): Mention possibility to unset
 875         inferior-tty.
 876
 877 2016-07-25  Tim Wiederhake  <tim.wiederhake@intel.com>
 878
 879         * gdb.texinfo: Resume btrace on reconnect.
 880
 881 2016-07-23  Gabriel Krisman Bertazi  <gabriel@krisman.be>
 882
 883         * gdb.texinfo (Set Catchpoints): Add 'group' argument to catch
 884         syscall.
 885
 886 2016-06-30  Руслан Ижбулатов  <lrn1986@gmail.com>
 887
 888         * gdb.texinfo (Cygwin Native): Document the new 'signal-event'
 889         command.
 890
 891 2016-07-13  Tom Tromey  <tom@tromey.com>
 892
 893         PR python/15620, PR python/18620:
 894         * python.texi (Events In Python): Document new breakpoint events.
 895
 896 2016-07-13  Tom Tromey  <tom@tromey.com>
 897
 898         PR python/17698:
 899         * python.texi (Breakpoints In Python): Document
 900         Breakpoint.pending.
 901
 902 2016-07-13  Tom Tromey  <tom@tromey.com>
 903
 904         * python.texi (Breakpoints In Python): Move table of types and
 905         table of watchpoint types earlier in node.
 906
 907 2016-07-12  Tom Tromey  <tom@tromey.com>
 908
 909         PR python/19293:
 910         * python.texi (Frames In Python): Document
 911         gdb.invalidate_cached_frames.
 912
 913 2016-06-21  Pedro Alves  <palves@redhat.com>
 914
 915         * gdb.texinfo (Interpreters): Update intepreter-exec section,
 916         document new-ui and explain use case.
 917
 918 2016-06-17  Yan-Ting Lin  <currygt52@gmail.com>
 919
 920         * gdb.texinfo (Standard Target Features): Document NDS32 features.
 921         (NDS32 Features): New Section.
 922
 923 2016-06-09  Toshihito Kikuchi  <k.toshihito@yahoo.de>
 924
 925         * gdb.texinfo (Examining Memory): Document negative repeat
 926         count in the 'x' command.
 927
 928 2016-06-06  Simon Marchi  <simon.marchi@ericsson.com>
 929
 930         * gdb.texinfo (GDB/MI Async Records): Document method and
 931         format fields in =record-started.
 932         * observer.texi (record_changed): Add method and format
 933         parameters.
 934
 935 2016-05-27  Eli Zaretskii  <eliz@gnu.org>
 936
 937         * gdb.texinfo (General Query Packets): Move the description of the
 938         response before the long list of the specific 'read' and 'write'
 939         requests.
 940
 941 2016-05-23  Tom Tromey  <tom@tromey.com>
 942
 943         * python.texi (Basic Python): Document gdb.breakpoints return.
 944
 945 2016-05-24  Tom Tromey  <tom@tromey.com>
 946
 947         PR gdb/19194:
 948         * gdb.texinfo (gdb man): Fix typo.
 949
 950 2016-05-17  Tom Tromey  <tom@tromey.com>
 951
 952         * gdb.texinfo (Supported Languages): Mention Rust.  Update menu.
 953         (Rust): New node.
 954
 955 2016-05-17  Tom Tromey  <tom@tromey.com>
 956
 957         * gdb.texinfo (Maintenance Commands): Document "maint selftest".
 958
 959 2016-04-27  Yao Qi  <yao.qi@linaro.org>
 960
 961         * gdb.texinfo (tfind): Complete doc about tfind without
 962         argument.
 963
 964 2016-04-13  Antoine Tremblay  <antoine.tremblay@ericsson.com>
 965
 966         * agentexpr.texi (byte): Fix zero_ext description.
 967
 968 2016-03-31  Pedro Alves  <palves@redhat.com>
 969
 970         * gdb.texinfo (M32R/SDI): Delete node.
 971         (MIPS Embedded): Remove references to the MIPS remote debugging
 972         protocol, PMON and variants, and the associated commands.
 973
 974 2016-03-15  Doug Evans  <dje@google.com>
 975
 976         * gdb.texinfo (Target Descriptions): New menu item "Enum Target Types".
 977         (Target Description Format): Mention enum types.  Update docs on
 978         flags types.
 979         (Predefined Target Types): Add "bool".
 980         (Enum Target Types): New node.
 981
 982 2016-03-15  Pedro Alves  <palves@redhat.com>
 983
 984         * gdb.texinfo (Tracepoint Actions): Fix typo.
 985
 986 2016-03-15  Pedro Alves  <palves@redhat.com>
 987             Andreas Arnez  <arnez@linux.vnet.ibm.com>
 988             Marcin Kościelnicki  <koriakin@0x04.net>
 989
 990         * gdb.texinfo (Tracepoint Actions): Document possible
 991         unreliability of '$_ret'.
 992
 993 2016-03-11  Andrew Burgess  <andrew.burgess@embecosm.com>
 994
 995         * gdb.texinfo (Symbols): Document new 'maint info line-table'
 996         command.
 997
 998 2016-03-10  Simon Marchi  <simon.marchi@polymtl.ca>
 999
1000         * gdb.texinfo (Convenience Functions): Document $_as_string.
1001
1002 2016-02-23  Doug Evans  <dje@google.com>
1003
1004         * gdb.texinfo (Skipping Over Functions and Files): Document new
1005         options to "skip" command.  Update docs of output of "info skip".
1006
1007 2016-02-18  Walfred Tedeschi  <walfred.tedeschi@intel.com>
1008
1009         * gdb.texinfo (Signals): Add bound violation display hints for
1010         a SIGSEGV.
1011
1012 2016-02-18  Marcin Kościelnicki  <koriakin@0x04.net>
1013
1014         * gdb.texinfo (Trace File Format): Add documentation for description
1015         section lines.
1016
1017 2016-02-10  Marcin Kościelnicki  <koriakin@0x04.net>
1018
1019         * gdb.texinfo (Trace File Format): Remove misleading information
1020         about register block ordering.
1021
1022 2016-02-01  Doug Evans  <dje@google.com>
1023
1024         * gdb.texinfo (Value Sizes): Fix typo.
1025
1026 2016-02-01  Doug Evans  <dje@google.com>
1027
1028         * gdb.texinfo (Skipping Over Functions and Files): Fix typo.
1029
1030 2016-02-01  Andrew Burgess  <andrew.burgess@embecosm.com>
1031
1032         * gdb.texinfo (Value Sizes): New section.
1033         (Data): Add the 'Value Sizes' node to the menu.
1034
1035 2016-01-26  John Baldwin  <jhb@FreeBSD.org>
1036
1037         * gdb.texinfo (Debugging Output): Fix subject verb disagreements.
1038
1039 2016-01-19  John Baldwin  <jhb@FreeBSD.org>
1040
1041         * gdb.texinfo (Debugging Output): Document "set/show debug fbsd-lwp".
1042
1043 2016-01-18  Pedro Alves  <palves@redhat.com>
1044
1045         * gdb.texinfo (Threads): Mention that GDB displays the ID and name
1046         of the thread that hit a breakpoint or received a signal.
1047
1048 2016-01-15  Pedro Alves  <palves@redhat.com>
1049
1050         * gdb.texinfo (Threads) <thread ID lists>: Document star ranges.
1051
1052 2016-01-13  Pedro Alves  <palves@redhat.com>
1053
1054         * gdb.texinfo (Threads): Document the $_gthread convenience
1055         variable.
1056         (Convenience Vars): Likewise.
1057
1058 2016-01-13  Pedro Alves  <palves@redhat.com>
1059
1060         * gdb.texinfo (Threads): Document "info threads -gid".
1061
1062 2016-01-13  Pedro Alves  <palves@redhat.com>
1063
1064         * python.texi (Breakpoints In Python) <Breakpoint.thread>: Add
1065         anchor.
1066         (Threads In Python): Document new InferiorThread.global_num
1067         attribute.
1068
1069 2016-01-07  Pedro Alves  <palves@redhat.com>
1070
1071         * gdb.texinfo (Threads): Document per-inferior thread IDs,
1072         qualified thread IDs, global thread IDs and thread ID lists.
1073         (Set Watchpoints, Thread-Specific Breakpoints): Adjust to refer to
1074         thread IDs.
1075         (Convenience Vars): Document the $_thread convenience variable.
1076         (Ada Tasks): Adjust to refer to thread IDs.
1077         (GDB/MI Async Records, GDB/MI Thread Commands, GDB/MI Ada Tasking
1078         Commands, GDB/MI Variable Objects): Update to mention global
1079         thread IDs.
1080         * guile.texi (Breakpoints In Guile)
1081         <breakpoint-thread/set-breakpoint-thread breakpoint>: Mention
1082         global thread IDs instead of thread IDs.
1083         * python.texi (Threads In Python): Adjust documentation of
1084         InferiorThread.num.
1085         (Breakpoint.thread): Mention global thread IDs instead of thread
1086         IDs.
1087
1088 2016-01-13  Pedro Alves  <palves@redhat.com>
1089
1090         * python.texi (Threads In Python): Document
1091         InferiorThread.inferior.
1092
1093 2016-01-13  Pedro Alves  <palves@redhat.com>
1094
1095         * gdb.texinfo (Inferiors and Programs): Document the $_inferior
1096         convenience variable.
1097         (Convenience Vars): Likewise.
1098
1099 2016-01-12  Josh Stone  <jistone@redhat.com>
1100             Philippe Waroquiers  <philippe.waroquiers@skynet.be>
1101
1102         * gdb.texinfo (Remote Configuration): List the QCatchSyscalls packet.
1103         (Stop Reply Packets): List the syscall entry and return stop reasons.
1104         (General Query Packets): Describe QCatchSyscalls, and add it to the
1105         table and the detailed list of stub features.
1106
1107 2016-01-12  Pedro Alves  <palves@redhat.com>
1108
1109         Remove use of the registered trademark symbol throughout.
1110
1111 2016-01-12  Yao Qi  <yao.qi@linaro.org>
1112
1113         * gdb.texinfo (Interrupts): Update the document on handling
1114         interrupt when program is stopped.
1115
1116 2015-12-11  Don Breazeal  <donb@codesourcery.com>
1117
1118         * gdb.texinfo (Forks): Correct Linux kernel version where
1119         fork and exec events are supported, add notes about support
1120         of these events in target remote mode.
1121         (Connecting): Reorganize and clarify distinctions between
1122         target remote, extended-remote, and multiprocess.
1123         Reorganize related text from separate sections into new
1124         sections.
1125         (Server): Note effects of target extended-remote mode.
1126         Delete section on Multi-Process Mode for gdbserver.
1127         Move some text to "Connecting" node.
1128
1129 2015-12-10  Pedro Alves  <palves@redhat.com>
1130
1131         * gdb.texinfo (Threads): Replace warning with explanation
1132         about single-threaded programs.
1133
1134 2015-12-10  Pedro Alves  <palves@redhat.com>
1135
1136         * gdb.texinfo (Threads): Remove mention of SGI.
1137         (Forks): Remove mention of HP-UX.
1138         (Breakpoints): Remove mention of HP-UX.
1139         (Set Watchpoints) <hardware watchpoints>: Don't mention HP-UX.
1140         Reword in terms of architectures.
1141         (Set Catchpoints) <catch exec, catch fork, catch vfork>: Don't
1142         mention supported systems.
1143         (Convenience Vars): Don't mention HP-UX.
1144         (Jumping): Remove mention of HP-UX in comment.
1145         (Files) <shared libraries>: Update supported shared library types
1146         list.  Remove mention of HP-UX.
1147         (Native): Remove HP-UX subsection.
1148         (SVR4 Process Information): Remove mention of HP-UX.
1149
1150 2015-12-10  Pedro Alves  <palves@redhat.com>
1151
1152         * gdb.texinfo (Stack): Reorder menu.
1153
1154 2015-12-09  Luis Machado  <lgustavo@codesourcery.com>
1155
1156         * gdb.texinfo (GDB/MI Variable Objects): Update text to mention
1157         -var-set-format's new zero-hexadecimal format.
1158
1159 2015-12-08  Pierre-Marie de Rodat  <derodat@adacore.com>
1160
1161         * gdb.texinfo (Ada Mode Into): Move overloading support
1162         description to its own node.
1163         (Overloading support for Ada): New node.
1164
1165 2015-11-30  Pedro Alves  <palves@redhat.com>
1166
1167         PR 14618
1168         * gdb.texinfo (Stop Reply Packets): Document the N stop reply.
1169         (Remote Configuration): Add the "set/show remote
1170         no-resumed-stop-reply" to the available settings table.
1171         (General Query Packets): Document the "no-resumed" qSupported
1172         feature.
1173
1174 2015-11-30  Pedro Alves  <palves@redhat.com>
1175
1176         * gdb.texinfo (Remote Configuration): List "set/show remote
1177         thread-events" command in configuration table.
1178         (Stop Reply Packets): Document "T05 create" stop
1179         reason and 'w' stop reply.
1180         (General Query Packets): Document QThreadEvents packet.  Document
1181         QThreadEvents qSupported feature.
1182
1183 2015-11-30  Pedro Alves  <palves@redhat.com>
1184
1185         * gdb.texinfo (Bootstrapping): Add "interrupting remote targets"
1186         anchor.
1187         (Packets): Document vCtrlC.
1188
1189 2015-11-26  Simon Marchi  <simon.marchi@ericsson.com>
1190
1191         * gdb.texinfo (Thread List Format): Mention thread names.
1192
1193 2015-11-24  Pedro Alves  <palves@redhat.com>
1194
1195         PR 17539
1196         * gdb.texinfo (Inferiors and Programs): Adjust "maint info
1197         program-spaces" example to ascending order listing.
1198         (Threads): Adjust "info threads" example to ascending order
1199         listing.
1200         (Forks): Adjust "info inferiors" example to ascending order
1201         listing.
1202
1203 2015-11-04  Markus Metzger  <markus.t.metzger@intel.com>
1204
1205         * gdb.texinfo (Process Record and Replay): Document "record
1206         instruction-history" modifiers.
1207
1208 2015-10-12  Andrew Burgess  <andrew.burgess@embecosm.com>
1209
1210         * gdb.texinfo (Frames): Remove 'frame' and 'select-frame'
1211         description.
1212         (Frame Filter Management): Move to later in the 'Examining the
1213         Stack' chapter.
1214         (Selection): Add entry for 'select-frame'.
1215
1216 2015-09-25  Doug Evans  <dje@google.com>
1217
1218         * gdb.texinfo (Process Record and Replay): Fix syntax of
1219         "record instruction-history begin, end" and
1220         "record function-call-history begin, end".
1221
1222 2015-09-22  Simon Marchi  <simon.marchi@ericsson.com>
1223
1224         * gdb.texinfo (Specifying Source Directories): Fix
1225         substitute-path example.
1226
1227 2015-09-18  Markus Metzger  <markus.t.metzger@intel.com>
1228
1229         * gdb.texinfo (All-Stop Mode): Describe new scheduler-locking mode.
1230
1231 2015-09-15  Pedro Alves  <palves@redhat.com>
1232
1233         PR remote/18965
1234         * gdb.texinfo (Stop Reply Packets): Revert previous change to
1235         the vforkdone description.
1236
1237 2015-09-15  Pedro Alves  <palves@redhat.com>
1238
1239         PR remote/18965
1240         * gdb.texinfo (Stop Reply Packets): Explain that vforkdone's 'r'
1241         part indicates the thread ID of the parent process.
1242
1243 2015-09-15  Yao Qi  <yao.qi@linaro.org>
1244
1245         * gdb.texinfo (General Query Packets): Add vContSupported to
1246         tables of 'gdbfeatures' and 'stub features' supported in the
1247         qSupported packet, as well as to the list containing stub
1248         feature details.
1249
1250 2015-09-11  Don Breazeal  <donb@codesourcery.com>
1251
1252         * gdb.texinfo (Remote Configuration): Add exec event
1253         feature to table of packet settings.
1254         (Stop Reply Packets): Add exec events to the list of stop
1255         reasons.
1256         (General Query Packets): Add exec events to tables of
1257         'gdbfeatures' and 'stub features' supported in the qSupported
1258         packet, as well as to the list containing stub feature
1259         details.
1260
1261 2015-08-24  Pedro Alves  <palves@redhat.com>
1262
1263         * gdb.texinfo (Remote Configuration): Document the "set/show
1264         remote multiprocess-extensions-packet" commands.
1265
1266 2015-08-24  Pedro Alves  <palves@redhat.com>
1267
1268         * gdb.texinfo (Embedded Processors) <ARM>: Remove references to RDI.
1269         <M32R>: Remove references to M32R/D.
1270         <M68K>: Remove references to target dbug.
1271         <MIPS Embedded>: Remove references to target r3900 and target
1272         array.
1273         <PowerPC Embedded>: Remove references to target dink32 and target
1274         ppcbug, target sds
1275         <PA, Sparclet, Sparclite, Z8000>: Delete nodes.
1276
1277 2015-08-18  Andrew Burgess  <andrew.burgess@embecosm.com>
1278
1279         * gdb.texinfo (GDB Files): Add 'File Caching' menu entry.
1280
1281 2015-08-18  Andrew Burgess  <andrew.burgess@embecosm.com>
1282
1283         * gdb.texinfo (File Caching): Document "set/show debug bfd-cache".
1284
1285 2015-08-18  Andrew Burgess  <andrew.burgess@embecosm.com>
1286
1287         * gdb.texinfo (Maintenance Commands): Move documentation of "main
1288         info bfds" to...
1289         (File Caching): A New section.  Outline bfd caching, and add new
1290         description for "main set/show bfd-sharing".
1291
1292 2015-08-14  Doug Evans  <xdje42@gmail.com>
1293
1294         * gdb.texinfo (Machine Code): Update docs for mixed source/assembly
1295         disassembly.
1296         (GDB/MI Data Manipulation): Update docs for new disassembly modes.
1297
1298 2015-08-11  Keith Seitz  <keiths@redhat.com>
1299
1300         * gdb.texinfo (Thread-Specific Breakpoints, Printing Source Lines):
1301         Use "location(s)"instead of "linespec(s)".
1302         (Specifying a Location): Rewrite.
1303         Add subsections describing linespec, address, and explicit locations.
1304         Add node/menu for each subsection.
1305         (Source and Machine Code, C Preprocessor Macros)
1306         (Create and Delete Trace points)
1307         (Extensions for Ada Tasks): Use "location(s)" instead of "linespec(s)".
1308         (Continuing at a Different Address): Remove "linespec" examples.
1309         Add reference to "Specify a Location"
1310         (The -break-insert Command): Rewrite.  Add anchor.
1311         Add reference to appropriate manual section discussing locations.
1312         (The -dprintf-insert Command): Refer to -break-insert for
1313         specification of 'location'.
1314
1315 2015-08-07  Pedro Alves  <palves@redhat.com>
1316
1317         * gdb.texinfo (Maintenance Commands): Document "maint set/show
1318         target-non-stop".
1319
1320 2015-08-07  Markus Metzger  <markus.t.metzger@intel.com>
1321
1322         * gdb.texinfo (Process Record and Replay): Document prefixing of
1323         speculatively executed instructions in the "record instruction-history"
1324         command.
1325
1326 2015-07-20  Doug Evans  <dje@google.com>
1327
1328         * Makefile.in (STABS_DOC_BUILD_INCLUDES): Add gdb-cfg.texi, GDBvn.texi.
1329
1330 2015-07-16  Doug Evans  <dje@google.com>
1331
1332         * stabs.texinfo: @include gdb-cfg.texi.
1333
1334 2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
1335
1336         Revert the previous 2 commits:
1337         gdbserver build-id attribute generator
1338         Validate symbol file using build-id
1339
1340 2015-07-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
1341
1342         * gdb.texinfo (Files): Add 'set validate-build-id'
1343         and 'show validate-build-id'.
1344
1345 2015-07-15  Aleksandar Ristovski  <aristovski@qnx.com
1346             Jan Kratochvil  <jan.kratochvil@redhat.com>
1347
1348         gdbserver build-id attribute generator.
1349         * gdb.texinfo (Library List Format for SVR4 Targets): Add
1350         'build-id' in description, example, new attribute in dtd.
1351
1352 2015-07-08  Andrew Burgess  <andrew.burgess@embecosm.com>
1353
1354         * gdb.texinfo (Selection): Update documentation for 'frame'
1355         command.
1356
1357 2015-07-02  Markus Metzger  <markus.t.metzger@intel.com>
1358
1359         * gdb.texinfo (Maintenance Commands): Document "maint btrace"
1360         commands.
1361
1362 2015-07-02  Markus Metzger  <markus.t.metzger@intel.com>
1363
1364         * gdb.texinfo (Process Record and Replay): Spell out that variables
1365         and registers are not available during btrace replay.
1366         Describe the new "record btrace pt" command.
1367         Describe the new "set|show record btrace pt buffer-size" options.
1368         (General Query Packets): Describe the new Qbtrace:pt and
1369         Qbtrace-conf:pt:size packets.
1370         Expand "bts" to "Branch Trace Store".
1371         Update the branch trace DTD.
1372
1373 2015-06-26  Patrick Palka  <patrick@parcs.ath.cx>
1374
1375         * gdb.texinfo (Command History): Document the new option
1376         "history remove-duplicates".
1377
1378 2015-06-19  Doug Evans  <dje@google.com>
1379
1380         * stabs.texinfo (ELF Linker Relocation): Mention Sun stabs is no
1381         longer supported.
1382
1383 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
1384
1385         * gdb.texinfo (Command History): Mention that setting
1386         GDBHISTSIZE to the empty string disables history truncation.
1387
1388 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
1389
1390         PR gdb/16999
1391         * gdb.texinfo (Command History): Mention new GDBHISTSIZE
1392         behavior.
1393
1394 2015-06-17  Patrick Palka  <patrick@parcs.ath.cx>
1395
1396         * gdb.texinfo (Command History): Replace occurrences of HISTSIZE
1397         with GDBHISTSIZE.
1398
1399 2015-06-15  Simon Marchi  <simon.marchi@ericsson.com>
1400
1401         * gdb.texinfo (GDB/MI Data Manipulation): Clarify usage of
1402         bytes and memory units for -data-{read,write}-memory-bytes.
1403         (Packets): Same for m, M and X packets.
1404         * python.texi (Inferiors In Python): Same for read_memory and
1405         write_memory.
1406
1407 2015-06-10  Jon Turney  <jon.turney@dronecode.org.uk>
1408
1409         * gdb.texinfo (Separate Debug Files): Document that PE is also
1410         supported.
1411
1412 2015-06-13  Andrew Burgess  <andrew.burgess@embecosm.com>
1413
1414         * gdb.texinfo (TUI Commands): Bring all 'tui reg' commands into a
1415         single table entry.
1416
1417 2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>
1418
1419         * gdb.textinfo (i386): Fix "@end table" end and "@table" placement.
1420
1421
1422 2015-06-10  Gary Benson <gbenson@redhat.com>
1423
1424         * gdb.texinfo (Remote Configuration): Document the
1425         "set/show remote hostio-setfs-packet" command.
1426         (Host I/O Packets): Document the vFile:setfs packet.
1427
1428 2015-06-10  Gary Benson <gbenson@redhat.com>
1429
1430         * gdb.texinfo (Debugging Output): Document the "set/show debug
1431         linux-namespaces" command.
1432
1433 2015-06-10  Walfred Tedeschi  <walfred.tedeschi@intel.com>
1434             Mircea Gherzan  <mircea.gherzan@intel.com>
1435
1436         * gdb.texinfo (i386): Add documentation about "show mpx bound"
1437         and "set mpx bound".
1438
1439 2015-05-27  Doug Evans  <dje@google.com>
1440
1441         * gdb.texinfo (Debugging Output): Mention set/show debug dwarf-line.
1442
1443 2015-05-26  Doug Evans  <dje@google.com>
1444
1445         * gdb.texinfo (Debugging Output): Update for DWARF "set debug"
1446         command renamings.
1447         (Maintenance Commands): Update for DWARF "set debug" command renamings.
1448
1449 2015-05-26  Andrew Burgess  <andrew.burgess@embecosm.com>
1450
1451         * gdb.texinfo (TUI Commands): Add 'tui reg prev' details.
1452
1453 2015-05-22  Andrew Burgess  <andrew.burgess@embecosm.com>
1454
1455         * gdb.texinfo (TUI): Include 'tui enable' in the introduction.
1456         (TUI Commands): Add 'tui enable' and 'tui disable' details.
1457
1458 2015-05-16  Doug Evans  <xdje42@gmail.com>
1459
1460         * guile.texi (Memory Ports in Guile): Document support for unbuffered
1461         memory ports.
1462
1463 2015-05-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
1464
1465         * gdb.texinfo (Compiling and Injecting Code): Add compile print.
1466
1467 2015-05-12  Don Breazeal  <donb@codesourcery.com>
1468
1469         * gdb.texinfo (Forks): Note that fork debugging is
1470         supported in extended mode.
1471         (Remote Configuration): Add fork event features to table
1472         of packet settings.
1473         (Stop Reply Packets): Add fork events to list of stop reasons.
1474         (General Query Packets): Add fork events to tables of
1475         'gdbfeatures' and 'stub features' supported in the qSupported
1476         packet, as well as to the list containing stub feature
1477         details.
1478
1479 2015-05-12  Gary Benson <gbenson@redhat.com>
1480
1481         * gdb.texinfo (General Query Packets): Document
1482         qXfer:exec-file:read with empty annex.
1483
1484 2015-05-09  Siva Chandra Reddy  <sivachandra@google.com>
1485
1486         * python.texi (Values From Inferior): Add descriptions of new
1487         methods gdb.Value.reference_value and gdb.Value.const_value.
1488
1489 2015-05-06  Joel Brobecker  <brobecker@adacore.com>
1490
1491         * gdb.texinfo (Files): Add "info dll" documentation.
1492         (Cygwin Native): Remove "info dll" documentation.
1493
1494 2015-04-29  Doug Evans  <dje@google.com>
1495
1496         * python.texi (Xmethod API) <gdb.XMethodWorker.get_result_type>:
1497         Document.
1498         (Writing an Xmethod): Add get_result_type to example.
1499
1500 2015-04-28  Sasha Smundak  <asmundak@google.com>
1501
1502         * python.texi: New method documented.
1503
1504 2015-04-24  Andrew Burgess  <andrew.burgess@embecosm.com>
1505
1506         * gdb.texinfo (Dump/Restore Files): Add detail about verilog dump
1507         format.
1508
1509 2015-04-24  Doug Evans  <dje@google.com>
1510
1511         * python.texi (Xmethods In Python): Fix name of method to call the
1512         xmethod.
1513
1514 2015-04-17  Gary Benson <gbenson@redhat.com>
1515
1516         * gdb.texinfo (Connecting to a Remote Target): Mention that
1517         GDB can access program files from remote targets that support
1518         qXfer:exec-file:read and Host I/O packets.
1519
1520 2015-04-17  Gary Benson <gbenson@redhat.com>
1521
1522         * gdb.texinfo (Remote Configuration): Document the "set/show
1523         remote pid-to-exec-file-packet" command.
1524         (General Query Packets): Document the qXfer:exec-file:read
1525         qSupported features.  Document the qXfer:exec-file:read packet.
1526
1527 2015-04-17  Gary Benson <gbenson@redhat.com>
1528
1529         * gdb.texinfo (set sysroot): Document that "set sysroot" also
1530         applies to executable paths if supplied to GDB as absolute.
1531
1532 2015-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
1533
1534         * gdb.texinfo (Mode Options): Remove -xdb.
1535
1536 2015-04-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
1537             Eli Zaretskii  <eliz@gnu.org>
1538
1539         * gdb.texinfo (Compiling and Injecting Code): Describe set debug
1540         compile, show debug compile.  New subsection Compilation options for
1541         the compile command.  New subsection Compiler search for the compile
1542         command.
1543
1544 2015-04-09  Andy Wingo  <wingo@igalia.com>
1545
1546         * guile.texi (Frames In Guile): Describe frame-read-register.
1547
1548 2015-04-02  Gary Benson <gbenson@redhat.com>
1549
1550         * gdb.texinfo (set sysroot): Document "target:".
1551
1552 2015-04-01  Sasha Smundak  <asmundak@google.com>
1553
1554         * doc/python.texi (Writing a Frame Unwinder in Python): Add
1555         section.
1556
1557 2015-03-31  Sergio Durigan Junior  <sergiodj@redhat.com>
1558
1559         PR corefiles/16092
1560         * gdb.texinfo (gcore): Mention new command 'set
1561         use-coredump-filter'.
1562         (set use-coredump-filter): Document new command.
1563
1564 2015-03-31  Antoine Tremblay  <antoine.tremblay@ericsson.com>
1565
1566         * gdb.texinfo (Operating System Auxiliary Information): Add info os cpus
1567         documentation, reorder the info os entries in alphabetical order.
1568
1569 2015-03-26  Simon Marchi  <simon.marchi@ericsson.com>
1570
1571         * gdb.texinfo (GDB/MI Data Manipulation): Fix copy-paste typo in
1572         -data-write-memory-bytes.
1573
1574 2015-03-24  Pedro Alves  <palves@redhat.com>
1575
1576         * gdb.texinfo (test_step) <set scheduler-locking step>: No longer
1577         mention that threads may sometimes run unlocked.
1578
1579 2015-03-23  Yurij Grechishhev  <yurij.grechishhev@gmail.com>
1580
1581         * gdb.texinfo (Remote configuration): Document "set/show
1582         serial parity" command.
1583
1584 2015-03-18  Gary Benson <gbenson@redhat.com>
1585
1586         * gdb.texinfo (General Query Packets): Remove documentation
1587         for now-removed vFile:fstat qSupported features.
1588
1589 2015-03-11  Gary Benson <gbenson@redhat.com>
1590
1591         * gdb.texinfo (Remote Configuration): Document the
1592         "set/show remote hostio-fstat-packet" command.
1593         (General Query Packets): Document the vFile:fstat
1594         qSupported features.
1595         (Host I/O Packets): Document the vFile:fstat packet.
1596
1597 2015-03-11  Andy Wingo  <wingo@igalia.com>
1598
1599         * guile.texi (Objfiles In Guile): Document objfile-progspace.
1600
1601 2015-03-04  Pedro Alves  <palves@redhat.com>
1602
1603         * gdb.texinfo (Remote Configuration): Document the "set/show
1604         remote swbreak-feature-packet" and "set/show remote
1605         hwbreak-feature-packet" commands.
1606         (Packets) <Z0>: Add cross link to the "swbreak" stop reason's
1607         decription.
1608         (Stop Reply Packets): Document the swbreak and hwbreak stop
1609         reasons.
1610         (General Query Packets): Document the swbreak and hwbreak
1611         qSupported features.
1612         (Remote Non-Stop): Explain that swbreak and hwbreak are required.
1613
1614 2015-03-03  Philippe Proulx  <eeppeliteloop@gmail.com>
1615
1616         * gdb.texinfo (gdb/mi Async Records): Fix duplicate syscall-entry
1617         under *stopped.
1618
1619 2015-03-02  Doug Evans  <xdje42@gmail.com>
1620
1621         * gdb.texinfo (Specify Location): Fix syntax of filename:function.
1622
1623 2015-03-02  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1624
1625         * gdb.texinfo (S/390 and System z Features): Describe new feature
1626         "org.gnu.gdb.s390.vx".
1627
1628 2015-02-23  Sergio Durigan Junior  <sergiodj@redhat.com>
1629
1630         PR gdb/18008
1631         * gdb.texinfo (maint internal-error, maint internal-warning, maint
1632         demangler-warning): Fix typo ("problam").
1633
1634 2015-02-19  David Taylor  <dtaylor@emc.com>
1635
1636         * agentexpr.texi (Bytecode Descriptions): Fix summary line for setv.
1637
1638 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1639
1640         * gdb.texinfo (Static Probe Points): Add cindex `static probe
1641         point, DTrace'.
1642         (Static Probe Points): Modified to cover DTrace probes in addition
1643         to SystemTap probes.  Also modified to cover the `enable probe'
1644         and `disable probe' commands.
1645
1646 2015-02-17  Jose E. Marchesi  <jose.marchesi@oracle.com>
1647
1648         * gdb.texinfo (Static Probe Points): Cover the `enable probe' and
1649         `disable probe' commands.
1650
1651 2015-02-12  David Taylor  <dtaylor@emc.com>
1652
1653         * gdb.texinfo (Tracepoint Packets): Document the builtin and name
1654         fields of the QTDV packet.
1655
1656 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1657
1658         * gdb.texinfo (Branch Trace Configuration Format): Add size.
1659         (Process Record and Replay): Describe new set|show commands.
1660         (General Query Packets): Describe Qbtrace-conf:bts:size packet.
1661
1662 2015-02-09  Markus Metzger  <markus.t.metzger@intel.com>
1663
1664         * gdb.texinfo (Process Record and Replay): Describe the "record
1665         btrace bts" command.
1666         (General Query Packets): Describe qXfer:btrace-conf:read packet.
1667         (Branch Trace Configuration Format): New.
1668
1669 2015-01-31  Gary Benson <gbenson@redhat.com>
1670             Doug Evans  <dje@google.com>
1671
1672         * gdb.texinfo (Command Completion): Document new
1673         "set/show max-completions" option.
1674
1675 2015-01-31  Doug Evans  <xdje42@gmail.com>
1676
1677         * gdb.texinfo (Symbols): Document new commands
1678         "maint print symbol-cache", "maint print symbol-cache-statistics",
1679         "maint flush-symbol-cache".  Document new option
1680         "maint set symbol-cache-size".
1681
1682 2015-01-31  Doug Evans  <xdje42@gmail.com>
1683
1684         * gdb.texinfo (dotdebug_gdb_scripts section): Update docs to
1685         distinguish script files vs inlined scripts.
1686         * python.texi (Python Auto-loading): Ditto.
1687
1688 2015-01-30  Doug Evans  <dje@google.com>
1689
1690         * gdb.texinfo (Symbols) <info source>: Output now contains producer
1691         string if present.
1692
1693 2015-01-27  Doug Evans  <dje@google.com>
1694
1695         * python.texi (Objfiles In Python): Document Objfile.username.
1696
1697 2015-01-27  Doug Evans  <dje@google.com>
1698
1699         * python.texi (Objfiles In Python) <Objfile.filename>: Improve docs.
1700         * guile.texi (Objfiles In Guile) <objfile-filename>: Improve docs.
1701
1702 2015-01-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
1703
1704         * gdb.texinfo (Threads): Describe -ascending for thread apply all.
1705
1706 2015-01-16  Eli Zaretskii  <eliz@gnu.org>
1707
1708         * doc/gdb.texinfo (TUI Commands): Document the possible
1709         values of NAME argument to 'winheight' command.  Explain the
1710         effect of 'tabset' setting better.
1711
1712 2015-01-11  Doug Evans  <xdje42@gmail.com>
1713
1714         PR gdb/15830
1715         * gdb.texinfo (Debugging C Plus Plus): Mention "demangle".
1716         (Symbols): Ditto.
1717         (Maintenance Commands): Delete docs for "maint demangle".
1718
1719 2014-12-31  Joel Brobecker  <brobecker@adacore.com>
1720
1721         * gdb.texinfo (Files): Remove documentation of the
1722         "add-shared-symbol-files" and "assf" commands.
1723         (Cygwin Native): Remove documentation of the "dll-symbols"
1724         command.
1725
1726 2014-12-17  Doug Evans  <xdje42@gmail.com>
1727
1728         * gdb.texinfo (Debugging Output): Document "debug symbol-lookup".
1729
1730 2014-12-12  Phil Muldoon  <pmuldoon@redhat.com>
1731             Jan Kratochvil  <jan.kratochvil@redhat.com>
1732
1733         * gdb.texinfo (Altering): Update.
1734         (Compiling and Injecting Code): New node.
1735
1736 2014-12-12  Doug Evans  <dje@google.com>
1737
1738         * python.texi (Objfiles In Python): Document gdb.lookup_objfile.
1739
1740 2014-12-12  Andreas Arnez  <arnez@linux.vnet.ibm.com>
1741
1742         * gdb.texinfo: Document "maint print user-registers".
1743
1744 2014-12-08  Doug Evans  <dje@google.com>
1745
1746         * python.texi (Objfiles In Python): Document Objfile.owner.
1747
1748 2014-12-04  Doug Evans  <dje@google.com>
1749
1750         * python.texi (Objfiles In Python): Document
1751         Objfile.add_separate_debug_file.
1752
1753 2014-12-04  Doug Evans  <dje@google.com>
1754
1755         * python.texi (Objfiles In Python): Document Objfile.build_id.
1756
1757 2014-12-02  Nick Bull  <nicholaspbull@gmail.com>
1758
1759         * python.texi (Events In Python): Document new events
1760         InferiorCallPreEvent, InferiorCallPostEvent, MemoryChangedEvent
1761         and RegisterChangedEvent.
1762
1763 2014-11-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
1764
1765         Add add-auto-load-scripts-directory.
1766         * gdb.texinfo (Auto-loading): Add add-auto-load-scripts-directory link.
1767         (objfile-gdbdotext file): Add add-auto-load-scripts-directory.
1768
1769 2014-11-30  Jan Kratochvil  <jan.kratochvil@redhat.com>
1770
1771         * gdb.texinfo (Auto-loading safe path): Fix add-auto-load-safe-path
1772         description typo.
1773
1774 2014-10-30  Doug Evans  <dje@google.com>
1775
1776         * python.texi (Progspaces In Python): Document ability to add
1777         random attributes to gdb.Progspace objects.
1778         (Objfiles In Python): Document ability to add random attributes to
1779         gdb.objfile objects.
1780
1781 2014-10-27  Pedro Alves  <palves@redhat.com>
1782
1783         * gdb.texinfo (Continuing and Stepping): Add cross reference to
1784         info on stepping and signal handlers.
1785         (Signals): Explain stepping and signal handlers.  Add context
1786         index entry, and cross references.
1787
1788 2014-10-20  Simon Marchi  <simon.marchi@ericsson.com>
1789
1790         * python.texi (Breakpoints In Python): Add parenthesis after
1791         Breakpoint.delete.  Clarify Breakpoint.enabled description so
1792         that it contains "disable".
1793
1794 2014-10-17  Doug Evans  <dje@google.com>
1795
1796         * python.texi (Events In Python): Document clear_objfiles event.
1797
1798 2014-10-17  Doug Evans  <dje@google.com>
1799
1800         * python.texi (Objfiles In Python): Document new progspace attribute.
1801
1802 2014-10-17  Pedro Alves  <palves@redhat.com>
1803
1804         * gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
1805         (SVR4 Process Information): Delete mention of OSF/1.
1806
1807 2014-10-01  Simon Marchi  <simon.marchi@ericsson.com>
1808
1809         * gdb.texinfo (Miscellaneous gdb/mi Commands): Document new
1810         exit-code field in -list-thread-groups output.
1811
1812 2014-09-22  Jan-Benedict Glaw  <jbglaw@lug-owl.de>
1813
1814         * gdb.texinfo (Set Breaks): Add missing "@end table".
1815
1816 2014-09-22  Pedro Alves  <palves@redhat.com>
1817
1818         * gdb.texinfo (Set Breaks): Document that "set breakpoint
1819         always-inserted off" is the default mode now.  Delete
1820         documentation of "set breakpoint always-inserted auto".
1821
1822 2014-09-18  Doug Evans  <dje@google.com>
1823
1824         * python.texi (Symbol Tables In Python): Document "producer"
1825         attribute of gdb.Symtab objects.
1826
1827 2014-09-16  Pedro Alves  <palves@redhat.com>
1828
1829         * gdb.texinfo (Starting) <run command>: Don't mention VxWorks.
1830         (Embedded OS): Remove VxWorks menu entry.
1831         (VxWorks): Remove node.
1832
1833 2014-09-13  Doug Evans  <xdje42@gmail.com>
1834
1835         * gdb.texinfo (Signaling): Document new queue-signal command.
1836
1837 2014-09-06  Doug Evans  <xdje42@gmail.com>
1838
1839         PR 15276
1840         * gdb.texinfo (Convenience Funs): Document $_caller_is,
1841         $_caller_matches, $_any_caller_is, $_any_caller_matches.
1842
1843 2014-09-03  Justin Lebar <jlebar@google.com>
1844
1845         * python.texi (Types In Python): Type.template_argument(n) returns a
1846         gdb.Value or a gdb.Type and throws an exception if n is out of
1847         range.
1848
1849 2014-09-03  Sasha Smundak  <asmundak@google.com>
1850
1851         * python.texi (Frames in Python): Add read_register description.
1852
1853 2014-08-04  Tom Tromey  <tromey@redhat.com>
1854
1855         * gdb.texinfo (Debugging Output): Update for change to "set debug
1856         target".
1857
1858 2014-08-01  Masaki Muranaka  <monaka@monami-software.com>
1859
1860         Pushed by Joel Brobecker  <brobecker@adacore.com>.
1861         * Makefile.in (transform): New variable.
1862         (install-man1, install-man5): Apply $(transform) to man file names.
1863
1864 2014-07-26  Doug Evans  <xdje42@gmail.com>
1865
1866         PR guile/17177
1867         * guile.texi (Guile Pretty Printing API): Fix typo.
1868         Document set-pretty-printers!, pretty-printers.
1869         (Selecting Guile Pretty-Printers): Update.
1870         Mention program-space based pretty-printers.
1871
1872 2014-07-25  Pedro Alves  <palves@redhat.com>
1873             Eli Zaretskii  <eliz@gnu.org>
1874
1875         * gdb.texinfo (Signaling) <signal command>: Explain what happens
1876         with multi-threaded programs.
1877
1878 2014-06-27  Yao Qi  <yao@codesourcery.com>
1879
1880         * gdb.texinfo (Maintenance Commands): Update the output of
1881         'maint print dummy-frames' command.
1882
1883 2014-06-24  Eli Zaretskii  <eliz@gnu.org>
1884
1885         * gdb.texinfo (Screen Size): Improve indexing.
1886
1887 2014-06-19  Gary Benson  <gbenson@redhat.com>
1888
1889         * gdb.texinfo (Maintenance Commands): Document new
1890         "maint set/show catch-demangler-crashes" option.
1891
1892 2014-06-19  Gary Benson  <gbenson@redhat.com>
1893
1894         * gdb.texinfo (Maintenance Commands): Document new
1895         "maint demangler-warning" command and new
1896         "maint set/show demangler-warning" option.
1897
1898 2014-06-09  Siva Chandra Reddy  <sivachandra@google.com>
1899
1900         * python.texi (Xmethod API): Add space before the opening
1901         parenthesis in function descriptions.
1902
1903 2014-06-06  Doug Evans  <xdje42@gmail.com>
1904
1905         * guile.texi (Guile Configuration): Document guile-data-directory.
1906
1907 2014-06-06  Mingjie Xing  <mingjie.xing@gmail.com>
1908
1909         * gdb.texinfo (Invoking GDB): Add -q and --quiet.
1910
1911 2014-06-04  Doug Evans  <xdje42@gmail.com>
1912
1913         * guile.texi (Breakpoints In Guile): Update.
1914
1915 2014-06-03  Joel Brobecker  <brobecker@adacore.com>
1916
1917         * python.texi (Xmethod API): Fix reference to "Progspaces In
1918         Python".
1919
1920 2014-06-03  Siva Chandra Reddy  <sivachandra@google.com>
1921
1922         *  python.texi (Xmethods In Python, XMethod API)
1923         (Writing an Xmethod): New nodes.
1924         (Python API): New menu entries "Xmethods In Python",
1925         "Xmethod API", "Writing an Xmethod".
1926
1927 2014-06-02  Doug Evans  <xdje42@gmail.com>
1928
1929         * guile.texi (Guile API): Add entry for Parameters In Guile.
1930         (GDB Scheme Data Types): Mention <gdb:parameter> object.
1931         (Parameters In Guile): New node.
1932
1933 2014-06-02  Doug Evans  <xdje42@gmail.com>
1934
1935         * guile.texi (Guile API): Add entry for Commands In Guile.
1936         (Basic Guile) <parse-and-eval>: Add reference.
1937         (Basic Guile) <string->argv>: Move definition to Commands In Guile.
1938         (GDB Scheme Data Types): Mention <gdb:command> object.
1939         (Commands In Guile): New node.
1940
1941 2014-06-02  Doug Evans  <xdje42@gmail.com>
1942
1943         * guile.texi (Guile API): Add entry for Progspaces In Guile.
1944         (GDB Scheme Data Types): Mention <gdb:progspace> object.
1945         (Progspaces In Guile): New node.
1946
1947 2014-05-30  Andrew Burgess  <aburgess@broadcom.com>
1948
1949         * guile.texi (Frames In Guile): Mention FRAME_UNWIND_MEMORY_ERROR.
1950         * python.texi (Frames In Python): Mention
1951         gdb.FRAME_UNWIND_MEMORY_ERROR.
1952
1953 2014-05-29  Pedro Alves  <palves@redhat.com>
1954             Tom Tromey  <tromey@redhat.com>
1955
1956         * gdb.texinfo (Non-Stop Mode): Remove "set target-async 1"
1957         from example.
1958         (Asynchronous and non-stop modes): Document '-gdb-set mi-async'.
1959         Mention that target-async is now deprecated.
1960         (Maintenance Commands): Document maint set/show target-async.
1961
1962 2014-05-29  Pedro Alves  <palves@redhat.com>
1963
1964         * observer.texi (sync_execution_done, command_error): New
1965         subjects.
1966
1967 2014-05-29  Pedro Alves  <palves@redhat.com>
1968
1969         PR gdb/13860
1970         * observer.texi (signal_received, end_stepping_range)
1971         (signal_exited, exited, no_history): New observer subjects.
1972
1973 2014-05-26  Andy Wingo  <wingo@igalia.com>
1974
1975         * guile.texi (GDB Scheme Data Types): Remove documentation for
1976         removed interfaces.  Update spelling of gdb-object-kind.
1977
1978 2014-05-26  Andy Wingo  <wingo@igalia.com>
1979
1980         * guile.texi (Basic Guile): Fix some typos.
1981
1982 2014-05-26  Andy Wingo  <wingo@igalia.com>
1983
1984         * guile.texi (Writing a Guile Pretty-Printer)
1985         (Guile Types Module): Fix excess parentheses in use-modules forms.
1986
1987 2014-05-24  Eli Zaretskii  <eliz@gnu.org>
1988
1989         * guile.texi (Types In Guile, Basic Guile, Frames In Guile)
1990         (Breakpoints In Guile, Guile Printing Module)
1991         (Guile Exception Handling, Values From Inferior In Guile)
1992         (Objfiles In Guile, Breakpoints In Guile, Memory Ports in Guile):
1993         Don't use @var at the beginning of a sentence.
1994
1995         * gdb.texinfo (Frame Filter Management, Trace Files)
1996         (C Operators, Ada Tasks, Calling, Bootstrapping, ARM)
1997         (PowerPC Embedded, Define, Annotations for Running)
1998         (IPA Protocol Commands, Packets, General Query Packets)
1999         (Tracepoint Packets, Notification Packets, Environment)
2000         (Inferiors and Programs, Set Breaks, Set Catchpoints)
2001         (Continuing and Stepping, Signals, Thread-Specific Breakpoints)
2002         (Frames, Backtrace, Selection, Expressions, Registers)
2003         (Trace State Variables, Built-In Func/Proc, Signaling, Files)
2004         (Numbers, GDB/MI Async Records, GDB/MI Data Manipulation)
2005         (Source Annotations, Using JIT Debug Info Readers, Packets)
2006         (Stop Reply Packets, Host I/O Packets)
2007         (Target Description Format): Don't use @var at the beginning of a
2008         sentence.
2009
2010         * python.texi (Basic Python, Types In Python)
2011         (Commands In Python, Frames In Python, Line Tables In Python)
2012         (Breakpoints In Python, gdb.printing, gdb.types)
2013         (Type Printing API): Don't use @var at the beginning of a
2014         sentence.
2015
2016 2014-05-23  Markus Metzger  <markus.t.metzger@intel.com>
2017
2018         * gdb.texinfo (Process Record and Replay): Document "set/show btrace
2019         replay-memory-access".
2020
2021 2014-05-21  Pedro Alves  <palves@redhat.com>
2022
2023         * gdb.texinfo (Starting): Document "set/show
2024         auto-connect-native-target".
2025         (Target Commands): Document "target native".
2026
2027 2014-05-20  Pedro Alves  <palves@redhat.com>
2028
2029         * gdb.texinfo (Memory) <compare-sections>: Generalize comments to
2030         not be remote specific.  Add cross reference to the qCRC packet.
2031         (Separate Debug Files): Update cross reference to the qCRC packet.
2032         (General Query Packets) <qCRC packet>: Add anchor.
2033
2034 2014-05-17  Doug Evans  <xdje42@gmail.com>
2035
2036         Copy over changes from guile.texi.
2037         * python.texi (Basic Python) <gdb.execute>: Add text.
2038         (Basic Python) <gdb.post_event>: Remove "main" from "main GDB thread".
2039         (Values From Inferior) <Python string>: Add text.
2040         (Values From Inferior) <Value.string>: Clarify string length handling.
2041         (Pretty Printing API): Add cindex.
2042         (Types In Python) <TYPE_CODE_*>: Use vtable instead of table.
2043         Remove unnecessary index of gdb.TYPE_CODE_*.  Replace @findex with
2044         @vindex.
2045         (Commands In Python) <COMPLETE_*>: Similarly.
2046         (Symbols In Python) <SYMBOL_*>: Similarly.
2047         (Breakpoints In Python) <WP_*>: Similarly.
2048         (Breakpoints In Python) <BP_*>: Similarly.
2049
2050 2014-05-17  David Taylor <dtaylor@emc.com>
2051
2052         * gdb.texinfo (General Query Packets): Add a note about thread IDs
2053         mentioned in the qfThreadInfo reply.
2054
2055 2014-05-16  Doug Evans  <dje@google.com>
2056
2057         * gdb.texinfo (Mode Options): Add -D.
2058
2059 2014-05-09  Samuel Bronson  <naesten@gmail.com>
2060
2061         * Makefile.in (PACKAGE): Copy from ../Makefile.in in case of
2062         "make -C".
2063
2064 2014-04-29  Tom Tromey  <tromey@redhat.com>
2065
2066         * gdb.texinfo (Debugging Output): Rename to "set debug varobj" and
2067         "show debug varobj".
2068
2069 2014-05-01  David Taylor  <dtaylor@emc.com>
2070
2071         * gdb.texinfo (compare-sections): Document the new -r (read-only)
2072         option.
2073
2074 2014-04-24  Michael Sturm  <michael.sturm@mintel.com>
2075             Walfred Tedeschi  <walfred.tedeschi@intel.com>
2076
2077         * gdb.texinfo (i386 Features): Add description of AVX512
2078         registers.
2079
2080 2014-03-31  Doug Evans  <dje@google.com>
2081
2082         * gdb.texinfo (Symbols): Document set/show print symbol-loading.
2083
2084 2014-03-30  Doug Evans  <dje@google.com>
2085
2086         * gdb.texinfo (Non-Stop Mode): Remove trailing whitespace.
2087         (Background Execution): Ditto.
2088
2089 2014-03-21  Pedro Alves  <palves@redhat.com>
2090             Stan Shebs  <stan@codesourcery.com>
2091             Hui Zhu  <hui@codesourcery.com>
2092
2093         * gdb.texinfo (Packets): Add anchor to "? packet".
2094         Remove fixme and update introduction of "k packet".
2095         Add anchor to "vKill packet".
2096
2097 2014-03-12  Stan Shebs  <stan@codesourcery.com>
2098
2099         * Doxyfile-gdb-api.in (INPUT): Add gdbtypes.h.
2100
2101 2014-02-26  Ludovic Courtès  <ludo@gnu.org>
2102
2103         * guile.texi (Basic Guile): Document 'history-append!'.
2104
2105 2014-02-20  Joel Brobecker  <brobecker@adacore.com>
2106
2107         * gdb.texinfo (Files): Document "add-shared-symbol-files"
2108         and "assf" as being deprecated.
2109         (Cygwin Native): Likewise for "dll-symbols".
2110         (Non-debug DLL Symbols): Remove reference to "dll-symbols"
2111         as a way to force the loading of symbols from a DLL.
2112
2113 2014-02-19  Siva Chandra Reddy  <sivachandra@google.com>
2114
2115         * python.texi (Values From Inferior): Add description about the
2116         new feature.
2117
2118 2014-02-17  Doug Evans  <xdje42@gmail.com>
2119
2120         * Makefile.in (GDB_DOC_FILES): Add python.texi.
2121         * gdb.texinfo (Python): Moved to ...
2122         * python.texi: ... here.  New file.
2123
2124 2014-02-17  Ludovic Courtès  <ludo@gnu.org>
2125
2126         * guile.texi (Writing a Guile Pretty-Printer) <example>:
2127         Remove 'string-begins-with' procedure.  Add 'pretty-printer'
2128         parameter to 'str-lookup-function' procedure.  Look for
2129         the "std::string<" prefix.
2130         (Frames In Guile): Add 'frame' parameter to 'frame-read-var'.
2131         Adjust description.
2132
2133 2014-02-11  Tejas Belagod  <tejas.belagod@arm.com>
2134
2135         * guile.texi (Values From Inferior In Guile): Remove stray
2136         parantheses for deffn.
2137         (Disassembly In Guile): Ditto.
2138
2139 2014-02-10  Stan Shebs  <stan@codesourcery.com>
2140
2141         Add Doxygen support.
2142         * Makefile.in (doxy): New action, generates Doxygen files.
2143         (DOXYGEN): New.
2144         (doxyedit): New.
2145         * Doxyfile-base.in: New file.
2146         * Doxyfile-gdb-api.in: New file.
2147         * Doxyfile-gdb-xref.in: New file.
2148         * Doxyfile-gdbserver.in: New file.
2149         * doxy-index.in: New file.
2150         * filter-for-doxygen: New file.
2151         * filter-params.pl: New file.
2152
2153 2014-02-10  Doug Evans  <xdje42@gmail.com>
2154
2155         * Makefile.in (GDB_DOC_FILES): Add guile.texi.
2156         * gdb.texinfo (Auto-loading): Add set/show auto-load guile-scripts.
2157         (Extending GDB): New menu entries Guile, Multiple Extension Languages.
2158         (Guile docs): Include guile.texi.
2159         (objfile-gdbdotext file): Add objfile-gdb.scm.
2160         (dotdebug_gdb_scripts section): Mention Guile scripts.
2161         (Multiple Extension Languages): New node.
2162         * guile.texi: New file.
2163
2164 2014-01-28  Joel Brobecker  <brobecker@adacore.com>
2165
2166         * gdb.texinfo (Ada Glitches): Document the new "maint ada set/show
2167         ignore-descriptive-types". commands.
2168
2169 2014-01-22  Doug Evans  <dje@google.com>
2170
2171         * gdb.texinfo (Server): Mention --debug-format=all|none|timestamp.
2172         (gdbserver man): Ditto.
2173
2174 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2175
2176         * gdb.texinfo: Document limited reverse/replay support
2177         for target record-btrace.
2178
2179 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2180
2181         * gdb.texinfo (Process Record and Replay): Update documentation.
2182
2183 2014-01-16  Markus Metzger  <markus.t.metzger@intel.com>
2184
2185         * gdb.texinfo (Process Record and Replay): Document new /c
2186         modifier accepted by "record function-call-history".
2187         Add /i modifier to "record function-call-history" example.
2188
2189 2014-01-15  Yuanhui Zhang  <asmwarrior@gmail.com>
2190             Joel Brobecker  <brobecker@adacore.com>
2191
2192         * gdb.texinfo (GDB/MI Output Syntax): Add some missing "nl"
2193         markers.  Remove one that was misplaced.
2194
2195 2014-01-10  Pedro Alves  <palves@redhat.com>
2196
2197         * gdb.texinfo (Your Program's Environment) <set environment>:
2198         Mention the shell, and point at 'set exec-wrapper'.
2199
2200 2014-01-07  Joel Brobecker  <brobecker@adacore.com>
2201
2202         * gdb.texinfo (Types In Python): Document new attribute Types.name.
2203
2204 2013-12-30  Joel Brobecker  <brobecker@adacore.com>
2205
2206         * gdb.texinfo (Types In Python): Clarify the documentation
2207         of attribute gdb.Field.bitpos.
2208
2209 2013-12-28  Joel Brobecker  <brobecker@adacore.com>
2210
2211         * gdb.texinfo (Types In Python): Fix the documentation of
2212         attribute "bitpos" in class gdb.Field for enum types.  Add
2213         documentation for attribute "enumval" in that same class.
2214
2215 2013-12-28  Joel Brobecker  <brobecker@adacore.com>
2216
2217         * gdb.texinfo (GDB/MI Support Commands): Change @table into
2218         @ftable.
2219
2220 2013-12-23  Doug Evans  <xdje42@gmail.com>
2221
2222         * gdb.texinfo (Auto-loading): Move menu up.  Move discussion of
2223         auto-loaded objfile scripts and .debug_gdb_scripts section to their
2224         corresponding section in Extending GDB.
2225         (Extending GDB): Move menu up.  New menu item "Auto-loading
2226         extensions".
2227         (Sequences): New menu item "Auto-loading sequences".
2228         (Auto-loading sequences): New node.
2229         (Python): Rename section from Scripting GDB to Extending GDB.
2230         (Python Auto-loading): Update xref, refer to "Auto-loading extensions".
2231         Move docs on ways to auto-load extensions to ...
2232         (Auto-loading extensions): ... here.  New node.
2233
2234 2013-12-23  Joel Brobecker  <brobecker@adacore.com>
2235
2236         * gdb.texinfo (GDB/MI): Add "GDB/MI Support Commands" entry
2237         in menu.
2238         (GDB/MI Variable Objects): Adjust reference to "-list-features"
2239         command, now in a new node.
2240         (GDB/MI Support Commands): New node, with its contents being
2241         extracted from the "GDB/MI Miscellaneous Commands" node.
2242         A small paragraph introducing the section is also added at
2243         the start.
2244         (GDB/MI Miscellaneous Commands): Delete the description of the
2245         -info-gdb-mi-command, -list-features and -list-target-features
2246         commands, now hosted in the "GDB/MI Support Commands" node.
2247
2248 2013-12-12  Siva Chandra Reddy  <sivachandra@google.com>
2249
2250         PR python/16113
2251         * gdb.texinfo (Values From Inferior): Add a note about using
2252         gdb.Field objects as subscripts on gdb.Value objects.
2253         (Types In Python): Add description about the new attribute
2254         "parent_type" of gdb.Field objects.
2255
2256 2013-12-12  Joel Brobecker  <brobecker@adacore.com>
2257
2258         * gdb.texinfo (GDB/MI Miscellaneous Commands): Add @cindex
2259         entry for section docuumenting the -list-features GDB/MI command.
2260
2261 2013-12-10  Joel Brobecker  <brobecker@adacore.com>
2262
2263         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document the new
2264         "exec-run-start-option" entry in the output of the "-list-features"
2265         command.
2266
2267 2013-12-04  Eli Zaretskii  <eliz@gnu.org>
2268
2269         * gdb.texinfo (i386): Fix yesterday's commit.
2270
2271 2013-12-03  Tom Tromey  <tromey@redhat.com>
2272
2273         * gdb.texinfo (Set Catchpoints): Add @kindex for each command
2274         documented here.
2275
2276 2013-12-03  Tom Tromey  <tromey@redhat.com>
2277
2278         * gdb.texinfo (@direntry): Add menu item for gdbserver.
2279
2280 2013-12-03  Walfred Tedeschi  <walfred.tedeschi@intel.com>
2281
2282         * gdb.texinfo (i386 Features): Add MPX feature registers.
2283         (x86 Specific featuresx86 Architecture-specific Issues): Adds
2284         a subsubsection for MPX and describes the display of the
2285         boundary registers.
2286
2287 2013-12-03  Joel Brobecker  <brobecker@adacore.com>
2288
2289         * gdb.texinfo (GDB/MI Miscellaneous Commands): Remove the
2290         documentation of the "ada-exceptions" entry.
2291
2292 2013-12-03  Joel Brobecker  <brobecker@adacore.com>
2293
2294         * gdb.texinfo (GDB/MI Result Records): Fix the syntax of the
2295         "^error" result record concerning the error message.  Document
2296         the error code that may also be part of that result record.
2297         (GDB/MI Miscellaneous Commands): Document the
2298         "undefined-command-error-code" element in the output of
2299         the "-list-features" GDB/MI command.
2300
2301 2013-12-03  Joel Brobecker  <brobecker@adacore.com>
2302
2303         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document
2304         the new -info-gdb-mi-command GDB/MI command.  Document
2305         the meaning of "-info-gdb-mi-command" in the output of
2306         -list-features.
2307
2308 2013-11-29  Pedro Alves  <palves@redhat.com>
2309
2310         * gdb.texinfo (Frames In Python) <gdb.FRAME_UNWIND_NULL_ID>:
2311         Update comment.
2312
2313 2013-11-24  Yao Qi  <yao@codesourcery.com>
2314
2315         * gdb.texinfo (Caching Remote Data): Document new
2316         "set/show stack-cache" option.
2317
2318 2013-11-24  Yao Qi  <yao@codesourcery.com>
2319
2320         * gdb.texinfo (Caching Target Data): Replace "ON" with "on".
2321         (Maintenance Commands): Replace "ON" and "OFF" with "on" and
2322         "off" respectively.
2323
2324 2013-11-23  Yao Qi  <yao@codesourcery.com>
2325
2326         * gdb.texinfo (GDB/MI Variable Objects): Add the description
2327         of "displayhint" to the table about child results.
2328
2329 2013-11-21  Yao Qi  <yao@codesourcery.com>
2330
2331         * gdb.texinfo (GDB/MI Variable Objects): Add attribute
2332         'dynamic' for the output of command -var-list-children.
2333
2334 2013-11-21  Yao Qi  <yao@codesourcery.com>
2335
2336         * gdb.texinfo (Caching Target Data): Remove "see" before
2337         @pxref.
2338
2339 2013-11-20  Yao Qi  <yao@codesourcery.com>
2340
2341         * gdb.texinfo (Caching Target Data): Update doc for
2342         per-address-space dcache.
2343
2344 2013-11-20  Yao Qi  <yao@codesourcery.com>
2345
2346         * gdb.texinfo (Data): Rename menu item.
2347         (Caching Remote Data): Rename to ...
2348         (Caching Target Data): ... it.  Update.
2349
2350 2013-11-18  Joel Brobecker  <brobecker@adacore.com>
2351
2352         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document the new
2353         "language-option" entry in the output of the "-list-features"
2354         command.
2355
2356 2013-11-15  Tom Tromey  <tromey@redhat.com>
2357
2358         * gdb.texinfo (Variables): Note gdb rules for ambiguous cases.
2359         Add example.
2360
2361 2013-11-14  Tom Tromey  <tromey@redhat.com>
2362
2363         * gdb.texinfo (Breakpoints In Python): Replace "as" with "in".
2364
2365 2013-11-14  Joel Brobecker  <brobecker@adacore.com>
2366
2367         * gdb.texinfo (Show): Add xref anchor for "show language" command.
2368         (Context management): Place current subsection text into its own
2369         subsubsection.  Add new subsubsection describing the "--language"
2370         command option.
2371
2372 2013-11-13  Joel Brobecker  <brobecker@adacore.com>
2373
2374         * gdb.texinfo (GDB/MI Miscellaneous Commands): Delete
2375         the documentation of "info-ada-exceptions" in the output
2376         of the "-list-features" command.  Add the documentation
2377         of the "ada-exception" entry instead.
2378
2379 2013-11-12  Joel Brobecker  <brobecker@adacore.com>
2380
2381
2382         * gdb.texinfo (GDB/MI Miscellaneous Commands): Fix the first
2383         word of a couple of sentences to start with a capital letter.
2384
2385 2013-11-12  Joel Brobecker  <brobecker@adacore.com>
2386
2387         * gdb.texinfo (Ada): Add entry in menu for new "Ada Exceptions" node.
2388         (Ada Exceptions): New node.
2389         (GDB/MI): Add entry in menu for new "GDB/MI Ada Exceptions
2390         Commands" node.
2391         (GDB/MI Ada Exceptions Commands): New node.
2392         (GDB/MI Miscellaneous Commands): Document new "info-ada-exceptions"
2393         field in the output of the "-list-features" command.
2394         * NEWS: Add entry for the new "info exceptions" CLI command,
2395         and for the new "-info-ada-exceptions" GDB/MI command.
2396
2397 2013-11-11  Phil Muldoon  <pmuldoon@redhat.com>
2398
2399         * gdb.texinfo (Symbol Tables In Python): Add linetable method entry.
2400         (Line Tables In Python): New node.
2401
2402 2013-11-08  Doug Evans  <dje@google.com>
2403
2404         * gdb.texinfo (Debugging Output): Update text for
2405         "set debug dwarf2-read".
2406
2407 2013-11-08  Doug Evans  <dje@google.com>
2408
2409         * gdb.texinfo (Debugging Output): Update text for
2410         "set debug symtab-create".
2411
2412 2013-11-07  Phil Muldoon  <pmuldoon@redhat.com>
2413
2414         * gdb.texinfo (Commands In Python): Document COMPLETE_EXPRESSION
2415         constant.
2416
2417 2013-11-07  Phil Muldoon  <pmuldoon@redhat.com>
2418
2419         * gdb.texinfo (Breakpoints In Python): Document temporary
2420         option in breakpoint constructor, and add documentation to the
2421         temporary attribute.
2422
2423 2013-11-07  Yao Qi  <yao@codesourcery.com>
2424
2425         * gdb.texinfo (GDB/MI Variable Objects): Update doc about the
2426         output of "-var-info-expression".
2427
2428 2013-11-06  Pedro Alves  <palves@redhat.com>
2429
2430         * gdb.texinfo (Starting) <set/show startup-with-shell>: Mention
2431         non-interactive mode.
2432         (Environment) <shell startup files warning>: Mention
2433         non-interactive mode.  Mention .zshenv for Z shell, and talk about
2434         BASH_ENV instead of .bashrc for BASH.
2435
2436 2013-10-29  Nicolas Blanc  <nicolas.blanc@intel.com>
2437
2438         * gdb.texinfo (Commands to Specify Files): Add description
2439         of the remove-symbol-file command.
2440         * observer.texi: New free_objfile event
2441
2442 2013-10-24  Pedro Alves  <palves@redhat.com>
2443
2444         * gdb.texinfo (Starting): Document set/show startup-with-shell.
2445
2446 2013-10-11  Joel Brobecker  <brobecker@adacore.com>
2447
2448         * gdb.texinfo (Shared Library GDB/MI Catchpoint Commands):
2449         New subsection inside which the "-catch-load" and "-catch-unload"
2450         commands documentation is now placed.
2451         (Ada Exception GDB/MI Catchpoint Commands): New subsection
2452         documenting the "-catch-assert" and "-catch-exception" new
2453         GDB/MI commands.
2454
2455 2013-10-10  Joel Brobecker  <brobecker@adacore.com>
2456
2457         * gdb.texinfo (Connecting): Remove unnecessary @w{}.
2458
2459 2013-10-10  Joel Brobecker  <brobecker@adacore.com>
2460
2461         * gdb.texinfo (Connecting): Replace "set remotebaud" by "set
2462         serial baud".
2463         (Remote Configuration): Replace "set remotebaud" by "set serial
2464         baud".  Replace "show remotebaud" by "show serial baud".
2465
2466 2013-10-07  Pedro Alves  <palves@redhat.com>
2467
2468         PR breakpoints/11568
2469         * gdb.texinfo (Thread-Specific Breakpoints): Mention what happens
2470         when the thread is removed from the thread list.
2471
2472 2013-10-06  Sergio Durigan Junior  <sergiodj@redhat.com>
2473
2474         * gdb.texinfo (Convenience Variables): Document $_exitsignal.
2475         Update entry for $_exitcode.
2476
2477 2013-10-04  Joel Brobecker  <brobecker@adacore.com>
2478
2479         * gdb.texinfo (GDB/MI Program Execution): Document "-exec-run"'s
2480         new "--start" option.
2481
2482 2013-10-02  Pedro Alves  <palves@redhat.com>
2483
2484         * gdb.texinfo (Registers): Expand description of saved registers
2485         in frames.  Explain <not saved>.
2486
2487 2013-09-25  Doug Evans  <dje@google.com>
2488
2489         * gdb.texinfo (Debugging Output): Document set/show debug symfile.
2490
2491 2013-09-16  Stan Shebs  <stan@codesourcery.com>
2492
2493         Remove the internals manual gdbint.texinfo.
2494         * Makefile.in (INFO_DEPS): Remove gdbint.info.
2495         (PDFFILES): Remove gdbint.pdf.
2496         (HTMLFILES): Remove gdbint/index.html.
2497         (HTMLFILES_INSTALL): Remove gdbint.
2498         (GDBINT_DOC_FILES): Remove.
2499         (dvi): Remove gdbint.dvi.
2500         (ps): Remove gdbint.ps.
2501         * gdbint.texinfo: Remove file.
2502         * gdb.texinfo (Maintenance Commands): Remove reference to gdbint.
2503
2504 2013-09-16  Sergio Durigan Junior  <sergiodj@redhat.com>
2505
2506         * gdb.texinfo (Convenience Functions): Mention new convenience
2507         function $_isvoid.
2508
2509 2013-09-13  Andreas Arnez  <arnez@linux.vnet.ibm.com>
2510
2511         * gdb.texinfo (Decimal Floating Point format): Mention S/390.
2512         (Standard Target Features): Add new node to menu.
2513         (S/390 and System z Features): New node.
2514
2515 2013-09-13  Sanimir Agovic  <sanimir.agovic@intel.com>
2516
2517         * gdb.texinfo (GDB/MI Miscellaneous Commands): Use
2518         -list-target-features in the example.
2519
2520 2013-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
2521
2522         * gdb.texinfo (MiniDebugInfo): Prepare file debug and use it to create
2523         mini_debuginfo.  Strip binary before adding mini_debuginfo to it.
2524
2525 2013-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
2526
2527         Sync documentation with gdb.base/gnu-debugdata.exp.
2528         * gdb.texinfo (MiniDebugInfo): Add comment and "D" in the example.
2529
2530 2013-09-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
2531
2532         * gdb.texinfo (MiniDebugInfo): Fix two trailing dots.
2533
2534 2013-08-27  Pedro Alves  <pedro@codesourcery.com>
2535             Yao Qi  <yao@codesourcery.com>
2536
2537         * gdb.texinfo (GDB/MI Stack Manipulation) <-stack-list-locals>:
2538         Document new --skip-unavailable option.
2539         <-stack-list-variables>: Document new --skip-unavailable option.
2540
2541 2013-08-26  Doug Evans  <dje@google.com>
2542
2543         * gdb.texinfo (Maintenance Commands): "maint print objfiles" now takes
2544         an optional regexp.
2545
2546 2013-08-13  Tom Tromey  <tromey@redhat.com>
2547
2548         * gdbint.texinfo (Testsuite): Use @table, not @itemize.
2549         Document GDB_PARALLEL and GDB_INOTIFY.
2550
2551 2013-08-09  Stan Shebs  <stan@codesourcery.com>
2552
2553         * LRS: Remove file, describes a long-abandoned live-range
2554         splitting extension to stabs.
2555
2556 2013-07-25  Andrew Burgess  <aburgess@broadcom.com>
2557
2558         * gdb.texinfo (Output Formats): Mention the new 'z' formatter.
2559
2560 2013-07-17  Doug Evans  <dje@google.com>
2561
2562         * gdb.texinfo (Print Settings): Document "print raw frame-arguments".
2563
2564 2013-07-02  Tom Tromey  <tromey@redhat.com>
2565
2566         * gdb.texinfo (Target Commands): Don't mention "target nrom".
2567
2568 2013-06-28  Tom Tromey  <tromey@redhat.com>
2569
2570         * Makefile.in (version.subst): Use version.in, not
2571         common/version.in.
2572         * gdbint.texinfo (Versions and Branches, Releasing GDB):
2573         Likewise.
2574
2575 2013-06-27  Pedro Alves  <palves@redhat.com>
2576
2577         * gdbint.texinfo (Algorithms) <Stepping over runtime loader
2578         dynamic symbol resolution code>: New section, based on infrun.c
2579         comment.
2580
2581 2013-06-26  Tom Tromey  <tromey@redhat.com>
2582
2583         * gdbint.texinfo (Versions and Branches): Use common/version.in.
2584         Update.
2585         (Releasing GDB): Likewise.
2586
2587 2013-06-26  Pedro Alves  <pedro@codesourcery.com>
2588             Yao Qi  <yao@codesourcery.com>
2589
2590         * gdb.texinfo (GDB/MI Tracepoint Commands): Document
2591         -trace-frame-collected.
2592
2593 2013-06-26  Pedro Alves  <pedro@codesourcery.com>
2594
2595         * gdb.texinfo (Traceframe Info Format): Document tvar element
2596         and its attributes.
2597
2598 2013-06-25  Yao Qi  <yao@codesourcery.com>
2599
2600         * gdbint.texinfo (Testsuite): Document 'gdb,predefined_tsv'.
2601
2602 2013-06-24  Tom Tromey  <tromey@redhat.com>
2603
2604         * Makefile.in (POD2MAN1, POD2MAN5): Use version.subst.
2605         (GDBvn.texi): Use version.subst.
2606         (version.subst): New target.
2607         (mostlyclean): Remove version.subst.
2608
2609 2013-06-20  Pedro Alves  <pedro@codesourcery.com>
2610
2611         * gdb.texinfo (GDB/MI Data Manipulation)
2612         <-data-list-register-values>: Document the --skip-unavailable
2613         option.
2614
2615 2013-06-07  Yao Qi  <yao@codesourcery.com>
2616
2617         * gdb.texinfo (Symbols): Add kindex and cindex for
2618         'maint print msymbols'.
2619
2620 2013-06-05  Simon Marchi  <simon.marchi@ericsson.com>  (tiny change)
2621
2622         * gdb.texinfo (Miscellaneous gdb/mi Commands): Fix -add-inferior
2623         response field name (thread-group to inferior).
2624
2625 2013-06-04 Gary Benson  <gbenson@redhat.com>
2626
2627         * gdb.texinfo (General Query Packets/qSupported): Added
2628         "qXfer:libraries-svr4:read" and "augmented-libraries-svr4-read".
2629         to the table of currently defined stub features.
2630         Added a more detailed entry for "augmented-libraries-svr4-read".
2631         (General Query Packets/qXfer:libraries-svr4:read): Documented
2632         the augmented form of this packet.
2633
2634 2013-05-23  Joel Brobecker  <brobecker@adacore.com>
2635
2636         * gdb.texinfo (System-wide Configuration Scripts): Renames
2637         "Installed System-wide Configuration Scripts". Add associated
2638         @menu block.
2639
2640 2013-05-23  Yao Qi  <yao@codesourcery.com>
2641             Pedro Alves  <palves@redhat.com>
2642
2643         * gdb.texinfo (Packets): Document 'vCont;r'.
2644         (Continuing and Stepping): Document target-assisted range
2645         stepping, and the 'set range-stepping' and 'show range-stepping'
2646         commands.
2647
2648 2013-05-23  Joel Brobecker  <brobecker@adacore.com>
2649
2650         * gdb.texinfo (Installed System-wide Configuration Scripts):
2651         Add subsection describing the scripts now available under
2652         the data-dir's system-gdbbinit subdirectory.
2653         * NEWS: Add entry announcing the availability of system-wide
2654         configuration scripts for ElinOS and Wind River Linux.
2655
2656 2013-05-21  Hui Zhu  <hui@codesourcery.com>
2657
2658         * gdb.texinfo (GDB/MI Breakpoint Commands): Describe the
2659         "-dprintf-insert" command.
2660
2661 2013-05-17  Doug Evans  <dje@google.com>
2662
2663         * gdb.texinfo (Maintenance Commands): Update doc for
2664         "maint check-psymtabs".  Add doc for "maint check-symtabs",
2665         "maint expand-symtabs".
2666
2667 2013-05-15  Markus Metzger  <markus.t.metzger@intel.com>
2668
2669         * gdb.texinfo (Process Record and Replay): Document the
2670         "record goto" command and its sub-commands.
2671
2672 2013-05-10 Phil Muldoon  <pmuldoon@redhat.com>
2673
2674         * gdb.texinfo (Backtrace): Add "no-filter" argument.
2675         (Python API): Add Frame Filters API, Frame Wrapper API,
2676         Writing a Frame Filter/Wrapper, Managing Management of Frame
2677         Filters chapter entries.
2678         (Frame Filters API): New Node.
2679         (Frame Wrapper API): New Node.
2680         (Writing a Frame Filter): New Node.
2681         (Managing Frame Filters): New Node.
2682         (Progspaces In Python): Add note about frame_filters attribute.
2683         (Objfiles in Python): Ditto.
2684         (GDB/MI Stack Manipulation): Add -enable-frame-filters command,
2685         @anchors and --no-frame-filters option to -stack-list-variables,
2686         -stack-list-frames, -stack-list-locals and -stack-list-arguments
2687         commands.
2688
2689 2013-05-08  Joel Brobecker  <brobecker@adacore.com>
2690
2691         * gdbint.texinfo (Native Debugging): Add "AIX Shared Library
2692         Support" subsection documenting the XML format used to transfer
2693         shared library info on AIX.
2694
2695 2013-05-08  Joel Brobecker  <brobecker@adacore.com>
2696
2697         * gdb.texinfo (Debugging Output): Add documentation of
2698         "set debug aix-solib" and "show debug aix-solib" commands.
2699
2700 2013-05-06  Sandra Loosemore  <sandra@codesourcery.com>
2701
2702         * gdb.texinfo (Nios II): New section.
2703         (Nios II Features): New section.
2704
2705 2013-05-06  Joel Brobecker  <brobecker@adacore.com>
2706
2707         * gdbint.texinfo (Algorithms): Remove entries documenting
2708         DEPRECATED_IBM6000_TARGET, SOLIB_ADD, and
2709         SOLIB_CREATE_INFERIOR_HOOK.
2710
2711 2013-04-29  Tom Tromey  <tromey@redhat.com>
2712
2713         PR python/14204:
2714         * gdb.texinfo (Python API): Fix menu entry.
2715         (Blocks In Python): Fix subsubsection text.  Rewrite intro.
2716         Define global and static block.  Add example.  Clarify
2717         block relationship for inline functions.
2718
2719 2013-04-29  Tom Tromey  <tromey@redhat.com>
2720
2721         * gdb.texinfo (Python API): Mention Python help and keyword
2722         arguments.  Move pagination text to Basic Python.
2723         (Basic Python): Put pagination text here.  Document
2724         close-on-exec, SIGCHLD, and SIGINT.
2725
2726 2013-04-19  Pedro Alves  <palves@redhat.com>
2727
2728         * gdbint.texinfo (Misc Guidelines) <Compiler Warnings>: Write
2729         "signedness" instead of "signness".
2730
2731 2013-04-19  Pedro Alves  <palves@redhat.com>
2732
2733         * gdbint.texinfo (Misc Guidelines) <Compiler Warnings>: Replace
2734         -Wno-pointer-sign text with text on -Wpointer-sign.
2735
2736 2013-04-16  Tom Tromey  <tromey@redhat.com>
2737
2738         * gdb.texinfo (Set Catchpoints): Mention earliest version of
2739         GCC that has the SDT probe points.
2740
2741 2013-04-15  Tom Tromey  <tromey@redhat.com>
2742
2743         * gdb.texinfo (Set Catchpoints): Document regexp syntax for
2744         exception catchpoints.
2745
2746 2013-04-15  Tom Tromey  <tromey@redhat.com>
2747
2748         * gdb.texinfo (Set Catchpoints): Document $_exception.
2749         (Convenience Vars): Mention $_exception.
2750
2751 2013-04-15  Tom Tromey  <tromey@redhat.com>
2752
2753         * gdb.texinfo (Set Catchpoints): Reorganize exception
2754         catchpoints.  Document "catch rethrow".
2755         (Debugging C Plus Plus): Mention "catch rethrow".
2756
2757 2013-04-15  Tom Tromey  <tromey@redhat.com>
2758
2759         * gdb.texinfo (Set Catchpoints): Remove obsolete text.
2760
2761 2013-04-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
2762             Eli Zaretskii  <eliz@gnu.org>
2763
2764         * gdb.texinfo (Auto-loading safe path): Add quick -iex using command
2765         line below the sample output.
2766
2767 2013-04-12  Eli Zaretskii  <eliz@gnu.org>
2768
2769         * gdb.texinfo (Mode Options): Document '-configuration'.
2770         (Help): Document "show configuration".
2771         (Bug Reporting): Add requirements to include the configuration
2772         details in bug reports.
2773
2774 2013-04-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
2775
2776         * Makefile.in (MAN1S): Add gcore.1.
2777         Remove "Host, target, and site specific Makefile fragments" comment.
2778         (@host_makefile_frag@, HAVE_NATIVE_GCORE_TARGET): New.
2779         (install-man1, uninstall-man1): Conditionalize gcore.1.
2780         (gcore.1): New.
2781         * gdb.texinfo (Man Pages): Add gcore man.
2782         (gcore man): New node.
2783
2784 2013-04-10  Pedro Alves  <palves@redhat.com>
2785
2786         * gdb.texinfo (Process Record and Replay): Document that "set
2787         record full insn-number-max", "set record
2788         instruction-history-size" and "set record
2789         function-call-history-size" accept "unlimited".
2790         (Backtrace): Document that "set backtrace limit" accepts
2791         "unlimited".
2792         (List): Document that "set listsize" accepts "unlimited".
2793         (Print Settings)" Document that "set print max-symbolic-offset",
2794         "set print elements" and "set print repeats" accept "unlimited".
2795         (Starting and Stopping Trace Experiments): Document that "set
2796         trace-buffer-size" accepts "unlimited".
2797         (Remote Configuration): Document that "set tcp connect-timeout"
2798         accepts "unlimited".
2799         (Command History): Document that "set history size" accepts
2800         "unlimited".
2801         (Screen Size): Document that "set height" and "set width" accepts
2802         "unlimited".  Adjust "set pagination"'s description to suggest
2803         "set height unlimited" instead of "set height 0".
2804
2805 2013-04-10  Yao Qi  <yao@codesourcery.com>
2806
2807         * gdb.texinfo (Trace Files): Add "target ctf".
2808
2809 2013-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
2810
2811         * Makefile.in (POD2MAN1, POD2MAN5): Replace $(VERSION) by ../version.in.
2812
2813         * Makefile.in (install-man1, install-man5, uninstall-man1)
2814         (uninstall-man5): Replace $(MANS) by $(MAN1S) and $(MAN5S) respectively.
2815
2816         * Makefile.in (gdb.1, gdbserver.1, gdbinit.5): Use $(srcdir).
2817
2818 2013-04-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
2819             Eli Zaretskii  <eliz@gnu.org>
2820
2821         * gdb.texinfo (gdbserver man): Rename tty to comm.  Swap --attach
2822         parameters order.  Remove "On some targets" for --attach.  Document the
2823         --multi parameter and extended-remote command.  Document all the
2824         options.
2825
2826 2013-04-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
2827
2828         * gdb.texinfo (gdb man): Mention option -p.  Include Fortran to
2829         the list of supported languages.
2830
2831 2013-04-05  Jan Kratochvil  <jan.kratochvil@redhat.com>
2832
2833         Convert man pages to texinfo, new gdbinit.5 texinfo page.
2834         * Makefile.in (mandir, man1dir, man5dir, SYSTEM_GDBINIT, MANCONF,
2835         (TEXI2POD, POD2MAN1, POD2MAN5, MAN1S, MAN5S, MANS, man): New.
2836         (diststuff): Add man.
2837         (install-man, install-man1, install-man5, uninstall-man, uninstall-man1)
2838         (uninstall-man5): New.
2839         (STAGESTUFF): Add *.1 and *.5.
2840         (GDBvn.texi): Add SYSTEM_GDBINIT.
2841         (gdb.1, gdbserver.1, gdbinit.5): New.
2842         (maintainer-clean realclean): Add $(MANS).
2843         (install): Add install-man.
2844         (uninstall): Add uninstall-man.
2845         * gdb.texinfo (@include gdb-cfg.texi): Wrap it by @c man begin INCLUDE.
2846         (@copying): Wrap it by @c man begin COPYRIGHT.
2847         (Top): Add Man Pages.
2848         (Man Pages, gdb man, gdbserver man, gdbinit man): New.
2849
2850 2013-04-02  Pedro Alves  <palves@redhat.com>
2851
2852         * gdb.texinfo (Debugging Output): Document "set/show debug
2853         aarch64", "set/show debug coff-pe-read" and "set/show debug
2854         mach-o".
2855
2856 2013-04-02  Pedro Alves  <palves@redhat.com>
2857
2858         * gdb.texinfo (Remote Configuration) <set remote @var{name}-packet
2859         table>: Add entry for "trace-buffer-size".
2860
2861 2013-03-28  Pedro Alves  <palves@redhat.com>
2862
2863         * gdb.texinfo (Remote Configuration) <set remote @var{name}-packet
2864         table>: Add entry for "trace-status".
2865
2866 2013-03-28  Eli Zaretskii  <eliz@gnu.org>
2867
2868         * gdb.texinfo (Maintenance Commands): Use @enumerate, not "@table
2869         @bullet", which is invalid (makeinfo 5.1 barfs).
2870
2871 2013-03-28  Pedro Alves  <palves@redhat.com>
2872
2873         PR gdb/15294
2874
2875         * gdb.texinfo (List) <set listsize>: Adjust to document that
2876         listsize 0 means no limit, and remove mention of -1.
2877
2878 2013-03-22  Yao Qi  <yao@codesourcery.com>
2879
2880         * gdb.texinfo (Embedded Processors): Remove menu item
2881         "OpenRISC 1000".
2882         (OpenRISC 1000): Remove.
2883
2884 2013-03-21  Doug Evans  <dje@google.com>
2885
2886         * gdb.texinfo (Maintenance Commands): Add docs for
2887         "mt set per-command {space,time,symtab} {on,off}".
2888
2889 2013-03-14  Hui Zhu  <hui@codesourcery.com>
2890             Yao Qi  <yao@codesourcery.com>
2891
2892         * gdb.texinfo (Trace Files): Add "tsave -ctf".
2893
2894 2013-03-13  Keith Seitz  <keiths@redhat.com>
2895
2896         * gdb.texinfo (Maintenance Commands): Add missing ')' for
2897         "maint agent" reference to Dynamic printf.
2898
2899 2013-03-11  Eli Zaretskii  <eliz@gnu.org>
2900
2901         * gdb.texinfo (General Query Packets): Don't use colon in index
2902         entries visible to Info format.
2903
2904 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
2905
2906         * gdb.texinfo (Process Record and Replay): Document record
2907         changes.
2908
2909 2013-03-11  Markus Metzger  <markus.t.metzger@intel.com>
2910
2911         * gdb.texinfo (Requirements): List qXfer:btrace:read requiring expat.
2912         (General Query Packets): Describe Qbtrace:bts, Qbtrace:off, and
2913         qXfer:btrace:read.
2914
2915 2013-03-09  Eli Zaretskii  <eliz@gnu.org>
2916
2917         * gdb.texinfo (General Query Packets, Tracepoint Packets): Don't
2918         use colons in @anchor and @cindex entries.
2919
2920 2013-03-09  Hafiz Abid Qadeer  <abidh@codesourcery.com>
2921
2922         * gdb.texinfo (QTBuffer:size): Add cindex and anchor.
2923
2924 2013-03-08  Stan Shebs  <stan@codesourcery.com>
2925             Hafiz Abid Qadeer  <abidh@codesourcery.com>
2926
2927         * gdb.texinfo (Starting and Stopping Trace Experiments): Document
2928         trace-buffer-size set and show commands.
2929         (Tracepoint Packets): Document QTBuffer:size.
2930         (General Query Packets): Document QTBuffer:size.
2931
2932 2013-02-21  Tom Tromey  <tromey@redhat.com>
2933
2934         * gdb.texinfo: Remove bad @syncodeindex.
2935         (Values From Inferior, Types In Python, Inferiors In Python)
2936         (Events In Python, Threads In Python, Frames In Python, Blocks In
2937         Python, Symbols In Python, Symbol Tables In Python): Remove
2938         @tables.
2939         (Packets, General Query Packets, Tracepoint Packets)
2940         (Host I/O Packets): Use @w{} for empty @item.
2941
2942 2013-02-20  Siva Chandra Reddy <sivachandra@google.com>
2943
2944         * gdb.texinfo (Architectures In Python): Add description about
2945         the new method gdb.Architecture.disassemble.
2946
2947 2013-02-15  Pedro Alves  <pedro@codesourcery.com>
2948             Hafiz Abid Qadeer  <abidh@codesourcery.com>
2949
2950         * gdb.texinfo (GDB/MI Tracepoint Commands) <-trace-status>:
2951         Document the "trace-file" field.
2952
2953 2013-02-07  Doug Evans  <dje@google.com>
2954
2955         * gdb.texinfo (Machine Code): Clarify argument to disassemble
2956         command.
2957
2958 2013-02-06  Yao Qi  <yao@codesourcery.com>
2959
2960         * gdb.texinfo (GDB/MI Async Records): Document new MI
2961         notification "=tsv-modified".  Update the document of MI
2962         notification "=tsv-created".
2963         * observer.texi (GDB Observers): New observer tsv_modified.
2964         Update observer tsv_created and tsv_delete.
2965
2966 2013-02-05  Yufeng Zhang  <yufeng.zhang@arm.com>
2967
2968         * gdb.texinfo (AArch64 Features): New section; document
2969         org.gnu.gdb.aarch64.core and org.gnu.gdb.aarch64.fpu.
2970         (Architectures): Add new AArch64 section to document AArch64
2971         architecture specific commands.
2972         (ABI): Add description of the new OS ABI "Newlib" and its influence
2973         on the longjmp handling.
2974
2975 2013-02-03  Eldar Gaynetdinov <hal9000ed2k@gmail.com>
2976             Jan Kratochvil  <jan.kratochvil@redhat.com>
2977
2978         * gdb.texinfo (Backtrace): Added description of 'filename-display'
2979         variable in 'set/show backtrace' section.
2980
2981 2013-01-31  Tom Tromey  <tromey@redhat.com>
2982
2983         * gdb.texinfo (Target Commands): Fix typo.
2984
2985 2013-01-23  Siva Chandra Reddy  <sivachandra@google.com>
2986
2987         * doc/gdb.texinfo (Architectures In Python): New sub-sub-section
2988         describing the gdb.Architecture class.
2989         (Frames In Python): Add description about the new method
2990         gdb.Frame.architecture().
2991
2992 2013-01-23  Doug Evans  <dje@google.com>
2993
2994         * gdb.texinfo (Index Section Format): Document .gdb_index version 8.
2995
2996 2013-01-21  Marc Khouzam  <marc.khouzam@ericsson.com>
2997
2998         * gdb.texinfo (GDB/MI Breakpoint Commands): Document new
2999         'thread-groups' field when printing a breakpoint in MI.
3000
3001 2012-01-17  Sanjoy Das <sanjoy@playingwithpointers.com>
3002         * gdb.texinfo (Using JIT Debug Info Readers): Change documentation
3003         to reflect that jit-reader-load now supports absolute file-names.
3004
3005 2013-01-16  Tom Tromey  <tromey@redhat.com>
3006
3007         * gdb.texinfo (Set Catchpoints): Document "catch signal".
3008         (Signals): Likewise.
3009
3010 2013-01-16  Tom Tromey  <tromey@redhat.com>
3011
3012         * gdb.texinfo (GDB/MI Breakpoint Information): Document
3013         "catch-type" field.
3014         (GDB/MI Catchpoint Commands): Add "catch-type" to examples.
3015
3016 2013-01-07  Tom Tromey  <tromey@redhat.com>
3017
3018         * gdb.texinfo (Mode Options): Don't mention -epoch.
3019         (Data, Emacs): Remove obsolete comments.
3020
3021 2013-01-02  Tom Tromey  <tromey@redhat.com>
3022
3023         * gdb.texinfo (GDB/MI Output Records): Update menu.
3024         (GDB/MI Breakpoint Information): New node.
3025         (GDB/MI Breakpoint Commands) <-break-info>: Link to new node.
3026         <-break-insert>: Likewise.
3027
3028 2012-12-31  Yao Qi  <yao@codesourcery.com>
3029
3030         * gdb.texinfo (Remote Non-Stop): Move paragraphs to ...
3031         (Packets): Move "vStopped" packet to ...
3032         (Notification Packets): ... here.  Describe the components
3033         of notification.  Add a table of supported notifications.
3034         Add an example on the process of he async notification.
3035
3036 2012-12-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
3037
3038         * gdb.texinfo (GDB/MI Data Manipulation) (fullname): Make it always
3039         present.
3040         (GDB/MI File Commands) (-file-list-exec-source-files): Make the
3041         fullname output always present.
3042
3043 2012-12-23  Pierre Muller  <muller@sourceware.org>
3044
3045         * gdbint.texinfo (Function prototypes): Require use of "extern"
3046         modifier for function prototypes in headers.
3047
3048 2012-12-19  Joel Brobecker  <brobecker@adacore.com>
3049
3050         * refcard.tex: Update copyright notice to GPL v3 or later.
3051         Update contact info.
3052
3053 2012-12-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
3054
3055         * gdbint.texinfo (Coding Standards) (C Usage): New rule for 0 vs. NULL.
3056
3057 2012-12-15  Yao Qi  <yao@codesourcery.com>
3058
3059         * gdb.texinfo (Debugging Output): Document 'set debug
3060         notification' and 'show debug notification'.
3061
3062 2012-12-15  Yao Qi  <yao@codesourcery.com>
3063
3064         * gdb.texinfo (Listing Tracepoints): New item and example about
3065         'installed on target' output.
3066         Add more in the example about 'installed on target'.
3067         (GDB/MI Breakpoint Commands): Doc about 'installed field.
3068
3069 2012-12-14  Tom Tromey  <tromey@redhat.com>
3070
3071         * gdb.texinfo (SVR4 Process Information): Mention core files.
3072
3073 2012-12-12 Mircea Gherzan <mircea.gherzan@intel.com>
3074
3075         * gdb.texinfo (GDB/MI Catchpoint Commands): New section.
3076
3077 2012-12-11  Pedro Alves  <palves@redhat.com>
3078
3079         * gdb.texinfo: Remove all mentions of Unixware throughout.
3080
3081 2012-12-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
3082
3083         * gdbint.texinfo (Host Definition): Remove CC_HAS_LONG_LONG.
3084
3085 2012-11-29  Tom Tromey  <tromey@redhat.com>
3086
3087         * gdb.texinfo (SVR4 Process Information): Document missing
3088         "info proc" subcommands.
3089
3090 2012-11-29  Yao Qi  <yao@codesourcery.com>
3091
3092         PR gdb/1477.
3093         * gdb.texinfo (Print Settings): Correct the default 'demangle-style'
3094         to 'auto' instead of 'gnu'.
3095
3096 2012-11-26  Tom Tromey  <tromey@redhat.com>
3097
3098         * gdb.texinfo (MiniDebugInfo): New node.
3099         (GDB Files): Update.
3100
3101 2012-11-16  Doug Evans  <dje@google.com>
3102
3103         * gdb.texinfo (System-wide configuration): If the system-wide init
3104         file lives in the data-directory, and --data-directory is provided,
3105         look for it there.
3106
3107 2012-11-15  Tom Tromey  <tromey@redhat.com>
3108
3109         * gdb.texinfo (Signaling): Fix typo.
3110
3111 2012-11-13  Giuseppe Montalto  <giuseppe.montalto@st.com>
3112
3113         * gdb.texinfo (GDB/MI Data Manipulation): Document new optional
3114         parameter "count" of -data-write-memory-bytes, and add an example.
3115
3116 2012-11-12  Tom Tromey  <tromey@redhat.com>
3117
3118         * gdb.texinfo (Symbols): Document "info type-printers",
3119         "enable type-printer" and "disable type-printer".
3120         (Python API): Add new node to menu.
3121         (Type Printing API): New node.
3122         (Progspaces In Python): Document type_printers field.
3123         (Objfiles In Python): Likewise.
3124         (gdb.types) <get_type_recognizers, apply_type_recognizers,
3125         register_type_printer, TypePrinter>: Document.
3126
3127 2012-11-12  Tom Tromey  <tromey@redhat.com>
3128
3129         * gdb.texinfo (Symbols): Document "set print type methods",
3130         "set print type typedefs", and flags to ptype and whatis.
3131
3132 2012-11-09  Andrew Burgess  <aburgess@broadcom.com>
3133
3134         * gdb.texinfo (GDB/MI Data Manipulation): Add fullname field to
3135         the example -data-disassemble output.  Extend the description of
3136         the -data-disassemble results to document all fields.  Document
3137         the cli disassemble command as being related to -data-disassemble.
3138
3139 2012-11-09  Yao Qi  <yao@codesourcery.com>
3140
3141         PR gdb/14777.
3142         * gdb.texinfo (OS Information): Remove doc on command
3143         'info udot'.
3144
3145 2012-11-08  Joel Brobecker  <brobecker@adacore.com>
3146
3147         * gdb.texinfo (Startup): Minor rewording, and clarify scope of
3148         gdb.ini warning for Windows port.
3149
3150 2012-11-08  Yao Qi  <yao@codesourcery.com>
3151
3152         * gdb.texinfo (Search): Add kindex for 'fo'.
3153
3154 2012-11-05  Tom Tromey  <tromey@redhat.com>
3155
3156         PR python/14802:
3157         * gdb.texinfo (Functions In Python): Add example.
3158
3159 2012-11-03  Yao Qi  <yao@codesourcery.com>
3160
3161         * observer.texi (GDB Observers): Remove observer
3162         'tracepoint_modified', 'tracepoint_created' and
3163         'tracepoint_deleted'.
3164
3165 2012-10-26  Tom Tromey  <tromey@redhat.com>
3166
3167         * gdb.texinfo (General Query Packets): Use @itemx for QAgent.
3168
3169 2012-10-25  Tom Tromey  <tromey@redhat.com>
3170
3171         * gdb.texinfo (General Query Packets): Use @itemx.
3172
3173 2012-10-17  Yao Qi  <yao@codesourcery.com>
3174
3175         * observer.texi (GDB Observers): Update observer
3176         'memory_changed'.
3177         * gdb.texinfo (GDB/MI Async Records): Document for
3178         "memory-changed" notification.
3179
3180 2012-10-15  Doug Evans  <dje@google.com>
3181
3182         * gdb.texinfo (Mode Options): Document -nh.
3183         Elaborate on docs for -nx.
3184
3185 2012-09-26  Siddhesh Poyarekar  <siddhesh@redhat.com>
3186
3187         * observer.texi (memory_changed): Expand parameter LEN to ssize_t.
3188
3189 2012-09-21  Yao Qi  <yao@codesourcery.com>
3190             Pedro Alves  <palves@redhat.com>
3191
3192         * gdb.texinfo (GDB/MI Async Records): Document notification
3193         'record-started' and 'record-stopped'.
3194         * observer.texi (GDB Observers): New observer 'record-changed'.
3195
3196 2012-09-19  Thomas Schwinge  <thomas@codesourcery.com>
3197
3198         * gdb.texinfo: Document the removal of SH's 'regs' command.
3199
3200 2012-09-18  Sergio Durigan Junior  <sergiodj@redhat.com>
3201
3202         * gdb.texinfo (jump): Mention new alias `j' for `jump'.
3203
3204 2012-09-18  Yao Qi  <yao@codesourcery.com>
3205
3206         * gdb.texinfo (GDB/MI Async Records): Document new MI
3207         notifications '=tsv-created' and '=tsv-deleted'.
3208         * observer.texi (GDB Observers): New observer tsv_created and
3209         tsv_deleted.
3210
3211 2012-09-18  Yao Qi  <yao@codesourcery.com>
3212
3213         * observer.texi (GDB Observers): New observer 'traceframe_changed'.
3214         * gdb.texinfo (GDB/MI Async Records): Mention new MI notification
3215         '=traceframe-changed'.
3216
3217 2012-09-17  Yao Qi  <yao@codesourcery.com>
3218
3219         * gdb.texinfo (List): Describe the meaning of 0 and -1 in
3220         'set listsize'.
3221
3222 2012-09-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
3223             Eli Zaretskii  <eliz@gnu.org>
3224
3225         * gdbint.texinfo (Defining Other Architecture Features): Clarify *pcptr
3226         encoding for gdbarch_breakpoint_from_pc, bp_addr for
3227         gdbarch_push_dummy_call and bp_addr for gdbarch_push_dummy_code.
3228
3229 2012-08-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
3230
3231         * gdb.texinfo (objfile-gdb.py file): New paragraph for .exe stripping.
3232
3233 2012-08-23  Khoo Yit Phang <khooyp@cs.umd.edu>
3234
3235         Document how to return from "python-interactive" to GDB.
3236         * gdb.texinfo (Python Commands): Update documentation.
3237
3238 2012-08-22  Khoo Yit Phang <khooyp@cs.umd.edu>
3239
3240         Add a new "python-interactive" command that starts a standard
3241         Python interactive prompt with "pi" as alias, and add "py" as
3242         an alias to "python".
3243         * gdb.texinfo (Python Commands): Document the new commands.
3244
3245 2012-08-22  Tom Tromey  <tromey@redhat.com>
3246
3247         * gdbint.texinfo (Host Definition): Remove documentation for
3248         SIGWINCH_HANDLER and SIGWINCH_HANDLER_BODY.
3249
3250 2012-08-17  Keith Seitz  <keiths@redhat.com>
3251
3252         PR c++/13356
3253         * gdb.texinfo (Type and Range Checking): Remove warning.
3254         Remove spurious commas.
3255         Update text and examples for re-implementation of set/show
3256         check type.
3257         (C and C++ Type and Range Checks): Likewise.
3258
3259 2012-08-16  Yao Qi  <yao@codesourcery.com>
3260
3261         * gdb.texinfo (Types In Python): Mention gdb.TYPE_CODE_BITSTRING
3262         is deprecated.
3263
3264 2012-08-13  Doug Evans  <dje@google.com>
3265
3266         * gdb.texinfo (Convenience Vars): Update text for "show convenience"
3267         to include functions.
3268
3269 2012-08-10  Doug Evans  <dje@google.com>
3270
3271         * gdb.texinfo (Convenience Funs): New node.
3272         (Types In Python): Document Type.vector.
3273
3274 2012-08-09  Yao Qi  <yao@codesourcery.com>
3275
3276         * observer.texi: New observer command_param_changed.
3277         * gdb.texinfo (GDB/MI Async Records): Doc for '=cmd-param-changed'.
3278
3279 2012-08-07  Jan Kratochvil  <jan.kratochvil@redhat.com>
3280
3281         * gdbint.texinfo (Debugging GDB): In section
3282         'Debugging @value{GDBN} with itself' change .gdbinit for gdb-gdb.gdb.
3283         Mention also gdb-gdb.py.
3284
3285 2012-08-07  Yao Qi  <yao@codesourcery.com>
3286
3287         Revert the folloing patch:
3288         2012-08-06  Yao Qi  <yao@codesourcery.com>
3289         * gdb.texinfo (Remote Configuration): Add kindex for 'set
3290         remote hardware-watchpoint-limit' and 'set
3291         remote hardware-breakpoint-limit'.
3292
3293 2012-08-06  Nathaniel Flath  <flat0103@gmail.com>
3294
3295         * gdb.texinfo (Working Directory): Added information about new
3296         default argument for 'cd' command.
3297
3298 2012-08-06  Yao Qi  <yao@codesourcery.com>
3299
3300         * gdb.texinfo (Remote Configuration): Add kindex for 'set
3301         remote hardware-watchpoint-limit' and 'set
3302         remote hardware-breakpoint-limit'.
3303
3304 2012-08-06  Yao Qi  <yao@codesourcery.com>
3305
3306         Fix PR14371.
3307
3308         * gdb.texinfo (GDB/MI Async Records): Fix the doc for
3309         '=breakpoint-deleted'.
3310
3311 2012-08-02  Yao Qi  <yao@codesourcery.com>
3312
3313         * gdb.texinfo (Native): Remove node Neutrino.
3314
3315 2012-07-27  Yao Qi  <yao@codesourcery.com>
3316
3317         * gdb.texinfo (IPA Protocol Commands): Document new command
3318         'close'.
3319
3320 2012-07-25  Tom Tromey  <tromey@redhat.com>
3321
3322         * gdb.texinfo (Maintenance Commands): Document maint info bfds.
3323
3324 2012-07-20  Doug Evans  <dje@google.com>
3325
3326         * gdb.texinfo (Mode Options): Delete --use-deprecated-index-sections.
3327         (Index Files): Document how to control the use of deprecated index
3328         sections.
3329         (Index Section Format): Replace --use-deprecated-index-sections with
3330         "set use-deprecated-index-sections on".
3331
3332 2012-07-12  Eli Zaretskii  <eliz@gnu.org>
3333
3334         * gdbint.texinfo: Remove @syncodeindex directives that put all the
3335         indices into a single node "Index".  Instead, join function and
3336         variable indices into a single index, separate from the concept
3337         index.  Requested in
3338         http://sourceware.org/ml/gdb-patches/2012-07/msg00146.html.
3339         (Top): Update the top-level menu: instead of one "Index" there are
3340         now separate entries "Concept Index" and "Function and Variable
3341         Index".
3342         (Concept Index, Function and Variable Index): New nodes.
3343         (Index): Node deleted.
3344
3345 2012-07-05  Hui Zhu  <hui_zhu@mentor.com>
3346
3347         * gdb.texinfo (Maintenance Commands): Change help for "maint agent"
3348         and "maint agent-eval".
3349
3350 2012-07-03  Eli Zaretskii  <eliz@gnu.org>
3351
3352         * gdb.texinfo: Separate the index into 2 indices, cp and fn, to
3353         avoid file-name clashes between Index.html and index.html on
3354         case-insensitive filesystems.  See the discussion starting in
3355         http://sourceware.org/ml/gdb-patches/2012-06/msg00457.html for the
3356         details of the problem.
3357         (Top): Update the master menu for the above.
3358         (Concept Index, Command and Variable Index): New nodes, instead of
3359         the old "Index" node that was deleted.  All cross-references
3360         updated.
3361
3362 2012-07-02  Stan Shebs  <stan@codesourcery.com>
3363
3364         * gdb.texinfo (Dynamic Printf): Mention agent style and
3365         disconnected dprintf.
3366         (Maintenance Commands): Describe maint agent-printf.
3367         (General Query Packets): Mention BreakpointCommands feature.
3368         (Packets): Document commands extension to Z0 packet.
3369         * agentexpr.texi (Bytecode Descriptions): Document printf
3370         bytecode.
3371
3372 2012-07-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
3373
3374         * gdb.texinfo (File Options): Change -ix and -iex commands that apply
3375         only after gdbinit files.
3376         (Startup): Move -iex and -iex commands down after gdbinit files.
3377
3378 2012-07-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
3379
3380         * gdb.texinfo (Auto-loading safe path): Note the shell wildcard
3381         possibility.
3382
3383 2012-06-29  Tom Tromey  <tromey@redhat.com>
3384
3385         * gdb.texinfo (Index Section Format): Update for version 7.
3386
3387 2012-06-28  Stan Shebs  <stan@codesourcery.com>
3388
3389         * gdb.texinfo (Miscellaneous GDB/MI Commands): Update -info-os
3390         example, add note about title column.
3391
3392 2012-06-26  Siva Chandra Reddy  <sivachandra@google.com>
3393
3394         * gdb.texinfo (Symbol Tables In Python): Add description about
3395         the new 'last' attribute of gdb.Symtab_and line.
3396
3397 2012-06-26  Siva Chandra Reddy  <sivachandra@google.com>
3398
3399         * gdb.texinfo (Symbol Tables In Python): Correct the description
3400         of the 'pc' attribute of gdb.Symtab_and_line.
3401
3402 2012-06-26  Doug Evans  <dje@google.com>
3403
3404         * gdb.texinfo (Debugging Output): Document debug options dwarf2-read
3405         and symtab-create.
3406
3407 2012-06-25  Keith Seitz  <keiths@redhat.com>
3408
3409         * gdb.texinfo (GDB/MI Breakpoint Commands): Remove "-r" option
3410         from example.  Remove "rbreak" from list of corresponding
3411         gdb commands.
3412
3413 2012-06-23  Doug Evans  <dje@google.com>
3414
3415         * gdb.texinfo (Index Section Format): Document version 7 format.
3416
3417 2012-06-22  Yao Qi  <yao@codesourcery.com>
3418
3419         * gdb.texinfo: Add missing cindex for some packets.
3420
3421 2012-06-20  Keith Seitz  <keiths@redhat.com>
3422
3423         * gdb.texinfo (GDB/MI Breakpoint Commands): Re-order options
3424         for -break-insert and document -p.
3425
3426 2012-06-20  Yao Qi  <yao@codesourcery.com>
3427
3428         * gdb.texinfo (Inferiors In Python): Replace "gdb.read_memory"
3429         and "gdb.write_memory" with "Inferior.read_memory" and
3430         "Inferior.write_memory".
3431
3432 2012-06-15  Patrice Dumas  <pertusus@free.fr>  (tiny change)
3433
3434         * gdb.texinfo (Summary): Add a link to "Free Documentation".
3435         (Free Documentation): Add @node line.
3436         (Continuing and Stepping) <advance location>: Use @item instead of
3437         @itemx.
3438         (Reverse Execution) <set exec-direction reverse>: Use @item instead of
3439         @itemx.
3440         (Embedded Processors): Put the link to "PA" to its correct place,
3441         according to document structure.
3442         (Python API): Put the link to "Lazy Strings In Python" to its
3443         correct place.
3444         (Index): Use @@ in @tex block to get a literal @.
3445
3446         * gdbint.texinfo: Fix the @subtitle line.
3447
3448         * stabs.texinfo (Top): Put the link to "Symbol Types Index" to its
3449         correct place.
3450
3451 2012-06-08  Yao Qi  <yao@codesourcery.com>
3452
3453         * gdb.texinfo (In-Process Agent): Add 'In-Process Agent
3454         Protocol'.
3455         (In-Process Agent Protocol, IPA Protocol Objects)
3456         (IPA Protocol Commands): New nodes.
3457         (Tracepoint Packets): Add anchors.
3458
3459 2012-06-06  Thomas Schwinge  <thomas@codesourcery.com>
3460
3461         * gdb.texinfo: Document the deprecation of SH's 'regs' command.
3462
3463 2012-06-06  Yao Qi  <yao@codesourcery.com>
3464
3465         * gdb.texinfo: Update copyright year.
3466
3467 2012-05-23  Stan Shebs  <stan@codesourcery.com>
3468             Kwok Cheung Yeung  <kcy@codesourcery.com>
3469
3470         * gdb.texinfo (Miscellaneous GDB/MI Commands): Document -info-os.
3471
3472 2012-05-20  Jan Kratochvil  <jan.kratochvil@redhat.com>
3473
3474         * gdb.texinfo (Separate Debug Files): New anchor debug-file-directory.
3475         Mention also --with-separate-debug-dir.
3476         (Auto-loading): Prepend $debugdir in the sample output.
3477         (Auto-loading safe path): Likewise.  Mention also $debugdir for the
3478         auto-load safe-path variable.
3479         (objfile-gdb.py file): Remove the extra debug-file-directory paragraph.
3480         Mention also $debugdir for 'set auto-load scripts-directory'.
3481
3482 2012-05-19  Eli Zaretskii  <eliz@gnu.org>
3483
3484         * gdb.texinfo (Continuing and Stepping, Selection, Byte Order)
3485         (MIPS Embedded, MIPS, MIPS Register packet Format)
3486         (Target Descriptions, MIPS Features): Use @acronym{MIPS} where
3487         appropriate.
3488
3489 2012-05-18  Sandra Loosemore  <sandra@codesourcery.com>
3490             Maciej W. Rozycki  <macro@codesourcery.com>
3491
3492         * gdb.texinfo (MIPS): Document "set mips compression" and "show
3493         mips compression".
3494         (MIPS Breakpoint Kinds): New subsubsection.
3495
3496 2012-05-18  Eli Zaretskii  <eliz@gnu.org>
3497
3498         * gdb.texinfo (Architecture-Specific Protocol Details): Define
3499         nodes for subsections.  Add @acronym mark-ups and adjust
3500         formatting.
3501
3502 2012-05-18  Jan Kratochvil  <jan.kratochvil@redhat.com>
3503
3504         Rename $ddir to $datadir.
3505         * gdb.texinfo (Auto-loading, Auto-loading safe path)
3506         (objfile-gdb.py file): Rename $ddir to $datadir.
3507
3508 2012-05-18  Tom Tromey  <tromey@redhat.com>
3509
3510         * gdb.texinfo (Print Settings): Document 'set print symbol'.
3511
3512 2012-05-14  Stan Shebs  <stan@codesourcery.com>
3513
3514         * gdb.texinfo (Dynamic Printf): New subsection.
3515
3516 2012-05-13  Siva Chandra Reddy  <sivachandra@google.com>
3517
3518         * gdb.texinfo (Basic Python): Add description about the function
3519         gdb.find_pc_line
3520
3521 2012-05-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
3522             Eli Zaretskii  <eliz@gnu.org>
3523
3524         * gdb.texinfo (Separate Debug Files): Use plural form for global
3525         debugging information directory.
3526
3527 2012-05-11  Stan Shebs  <stan@codesourcery.com>
3528             Kwok Cheung Yeung  <kcy@codesourcery.com>
3529
3530         * gdb.texinfo (Operating System Auxiliary Information): Document new
3531         'info os' subcommands.
3532
3533 2012-05-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3534
3535         * gdb.texinfo (Auto-loading, Init File in the Current Directory)
3536         (libthread_db.so.1 file, objfile-gdb.gdb file, objfile-gdb.py file)
3537         (dotdebug_gdb_scripts section): Add reference
3538         to 'Auto-loading safe path'.
3539
3540 2012-05-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3541
3542         Implement multi-component --with-auto-load-dir.
3543         * gdb.texinfo (Auto-loading): New references
3544         for 'set auto-load scripts-directory'
3545         and 'show auto-load scripts-directory'.
3546         (Auto-loading safe path): Describe the new default.  Move $ddir
3547         substituation reference to 'objfile-gdb.py file'.
3548         (objfile-gdb.py file): Describe script-name alias.  Change real-name to
3549         script-name.  Describe new 'set auto-load scripts-directory'
3550         and 'show auto-load scripts-directory'.
3551
3552 2012-05-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
3553
3554         Provide $ddir substitution for --with-auto-load-safe-path.
3555         * gdb.texinfo (Auto-loading): Replace /usr/local by $ddir/auto-load.
3556         (Auto-loading safe path): Likewise.  Mention the default value,
3557         $ddir substitution, --with-auto-load-safe-path and
3558         --without-auto-load-safe-path.
3559         * observer.texi (gdb_datadir_changed): New.
3560
3561 2012-05-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
3562
3563         * gdb.texinfo (Auto-loading): Wrap too long lines in @smallexample.
3564         Twice.
3565
3566         * gdb.texinfo (Separate Debug Files, Auto-loading safe path): Replace
3567         directory separator by path separator.
3568
3569 2012-05-06  Jan Kratochvil  <jan.kratochvil@redhat.com>
3570
3571         * gdb.texinfo (Auto-loading safe path): Make 'directories'
3572         for 'set auto-load safe-path' optional.  Mention if it is omitted.
3573         Change disabling security protection condition to "/", twice.
3574
3575 2012-05-03  Siva Chandra Reddy  <sivachandra@google.com>
3576
3577         * gdb.texinfo (Symbol Tables In Python): Add documentation about
3578         the new methods global_block and static_block on gdb.Symtab
3579         objects.
3580
3581 2012-05-02  Siva Chandra Reddy  <sivachandra@google.com>
3582
3583         * gdb.texinfo (Blocks In Python): Add a note saying that future
3584         improvements to GDB and its infrastructure can move symbols
3585         across blocks within a symbol table.
3586
3587 2012-04-29  Yao Qi  <yao@codesourcery.com>
3588
3589         * gdb.texinfo (Architectures): Remove menu entry `A29K'.
3590         (A29K): Remove.
3591
3592 2012-04-27  Sergio Durigan Junior  <sergiodj@redhat.com>
3593             Tom Tromey  <tromey@redhat.com>
3594
3595         * gdb.texinfo (Static Probe Points): New entry, explaining SystemTap
3596         and generic static probe support on GDB.
3597
3598 2012-04-25  Doug Evans  <dje@google.com>
3599
3600         * gdb.texinfo (Go): Fix thinko.
3601
3602         * gdb.texinfo (Supported Languages): Add Go.
3603         (Go): New node.
3604
3605 2012-04-25  Yao Qi  <yao@codesourcery.com>
3606
3607         * gdbint.texinfo (Testsuite): New section `Board settings'.
3608
3609 2012-04-23  Jan Kratochvil  <jan.kratochvil@redhat.com>
3610
3611         * gdb.texinfo (Auto-loading safe path): Remove trailing [@dots{}].
3612         Three times.
3613
3614         * gdb.texinfo (Auto-loading safe path): Add trailing @dots{}.
3615         Three times.
3616
3617 2012-04-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
3618
3619         * gdb.texinfo (Auto-loading safe path): Replace @itemize @bullet
3620         by @table @asis.  Fix formatting of one item.
3621
3622 2012-04-18  Jan Kratochvil  <jan.kratochvil@redhat.com>
3623
3624         * gdb.texinfo (Auto-loading verbose mode): Fix smallexample typo.
3625
3626 2012-04-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
3627
3628         New option "set debug auto-load".
3629         * gdb.texinfo (Auto-loading): New menu item for auto-load verbose mode.
3630         (auto-load verbose mode): New node.
3631
3632 2012-04-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
3633
3634         New option "set auto-load safe-path".
3635         * gdb.texinfo (Auto-loading): Extend the "show auto-load"
3636         and "info auto-load" examples for safe-path.  Put there also references
3637         for "set auto-load safe-path" and "show auto-load safe-path".
3638         New menu item for Auto-loading safe path.
3639         (Auto-loading safe path): New node.
3640         (Python Auto-loading): Update the expected output from "Missing"
3641         to "No".
3642
3643 2012-04-17  Jan Kratochvil  <jan.kratochvil@redhat.com>
3644
3645         auto-load: Implementation.
3646         * gdb.texinfo (Mode Options): New anchor for -nx.
3647         (Startup): New anchors for Option -init-eval-command,
3648         Home Directory Init File
3649         and Init File in the Current Directory during Startup.
3650         Mention set auto-load local-gdbinit with a reference.
3651         Change the sample code to "set auto-load python-scripts".
3652         (Threads): New anchor set libthread-db-search-path.
3653         Provide references to libthread_db.so.1 file.
3654         (Controlling GDB): New menu item for Auto-loading.
3655         (Auto-loading, Init File in the Current Directory)
3656         (libthread_db.so.1 file, objfile-gdb.gdb file): New nodes.
3657         (Python): Rename the menu item Auto-loading to Python Auto-loading.
3658         (Writing a Pretty-Printer, Objfiles In Python): Update the renamed
3659         reference.
3660         (Auto-loading): Rename to ...
3661         (Python Auto-loading): ... here.  Change "set auto-load-scripts" to
3662         "set auto-load python-scripts", new anchor for it.  Change
3663         "show auto-load-scripts" to "show auto-load python-scripts", new anchor
3664         for it.  Change "info auto-load-scripts"
3665         to "info auto-load python-scripts", new anchor for it.  Change "scripts"
3666         to "Python scripts".
3667
3668 2012-04-14  Anton Gorenkov <xgsa@yandex.ru>
3669
3670         PR mi/13393
3671         * gdb.texinfo (Print Settings): Extend the description for "set print
3672         object".
3673         (GDB/MI Variable Objects): Extend the description for -var-create and
3674         -var-list-children.
3675
3676 2012-04-11  Siva Chandra Reddy  <sivachandra@google.com>
3677
3678         * gdb.texinfo (Examining Data): Document the 'explore' command.
3679
3680 2012-03-28  Joel Brobecker  <brobecker@adacore.com>
3681
3682         * gdb.texinfo (GDB/MI Variable Objects): Document what happens
3683         to the children of a varobj and its update range when -var-update
3684         returns that the varobj's type changed.
3685
3686 2012-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
3687
3688         * gdb.texinfo (Auto-loading): Move @menu to the end of @node.
3689         Create two new links fir 'objfile-gdb.py file'
3690         and 'dotdebug_gdb_scripts section'.
3691
3692 2012-03-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
3693
3694         * gdb.texinfo (Auto-loading): Rename node reference
3695         '.debug_gdb_scripts section' to 'dotdebug_gdb_scripts section'.
3696         Twice.
3697         (.debug_gdb_scripts section): Rename the node ...
3698         (dotdebug_gdb_scripts section): ... here.
3699         (Maintenance Commands): Also rename this node reference.
3700
3701 2012-03-22  Siva Chandra Reddy  <sivachandra@google.com>
3702
3703         * gdb.texinfo (Python API/Values From Inferior): Add description
3704         about the new method Value.referenced_value.  Add description on
3705         how Value.dereference is different (and similar) to
3706         Value.referenced_value.
3707
3708 2012-03-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
3709
3710         * gdb.texinfo (File Options): Describe --init-command=FILE, -ix and
3711         --init-eval-command=COMMAND, -iex.
3712         (Startup): Describe -iex and -ix.  Simplify the example
3713         for "set auto-load-scripts off".
3714
3715 2012-03-16  Gary Benson  <gbenson@redhat.com>
3716
3717         PR breakpoints/10738
3718         * gdb.texinfo (Inline Functions): Remove the now-unnecessary @item
3719         stating that GDB cannot set breakpoints on inlined functions.
3720         (Mode Options): Document --use-deprecated-index-sections.
3721         (Index Section Format): Document new index section version format.
3722
3723 2012-03-15  Tom Tromey  <tromey@redhat.com>
3724
3725         * gdb.texinfo (Debugging C Plus Plus): Document "info vtbl".
3726
3727 2012-03-13  Doug Evans  <dje@google.com>
3728
3729         * gdb.texinfo (Help): Change apropos example to use "alias" instead
3730         of "reload".
3731         (Symbols): Delete docs for set/show symbol-reloading.
3732         * gdbint.texinfo (Defining Other Architecture Features): Delete
3733         SYMBOL_RELOADING_DEFAULT.
3734         * refcard.tex: Delete reference to symbol-reloading.
3735
3736 2012-03-07  Pedro Alves  <palves@redhat.com>
3737
3738         * gdb.texinfo (General Query Packets): Document new
3739         QProgramSignals packet.
3740         * gdb.texinfo (Remote configuration): Mention
3741         "program-signals-packet".
3742
3743 2012-03-05  Tristan Gingold  <gingold@adacore.com>
3744
3745         * gdb.texinfo (General Query Packets): Document xfer:uib:read.
3746
3747 2012-03-03  Yao Qi  <yao@codesourcery.com>
3748
3749         * gdb.texinfo (In-Process Agent): New node.
3750         Document new commands.
3751         (General Query Packets): Add packet `QAgent'.
3752
3753 2012-03-01  Maciej W. Rozycki  <macro@codesourcery.com>
3754
3755         * gdb.texinfo (MIPS Features): Add org.gnu.gdb.mips.dsp.
3756
3757 2012-03-01  Scott J. Goldman <scottjg@vmware.com>
3758
3759         * gdb.texinfo (Commands In Python): Put example python macro in
3760         COMMAND_USER category rather than COMMAND_OBSCURE.
3761         Document gdb.COMMAND_USER.
3762         (User-defined Commands): Update documentation to clarify
3763         "set/show max-user-call-depth" and "show user" don't apply to python
3764         commands.  Update documentation to clarify "help user-defined" may
3765         also include python commands defined as COMMAND_USER.
3766
3767 2012-02-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
3768
3769         * gdb.texinfo (Startup): Add option -ex description to the option -x
3770         description.
3771
3772 2012-02-24  Luis Machado  <lgustavo@codesourcery.com>
3773
3774         * gdb.texinfo (Setting Breakpoints): Mention and explain the
3775         condition-evaluation breakpoint parameter.
3776         Mention condition-evaluation mode being shown in "info break".
3777         (Break Conditions): Add description for target-side
3778         conditional breakpoints.
3779         (Remote Configuration): Mention conditional-breakpoints-packet.
3780         (Packets): Add cond-expr parameter to Z0/Z1 packets and explain
3781         cond-expr.
3782         (General Query Packets): Mention new ConditionalBreakpoint feature.
3783
3784 2012-02-22  Tom Tromey  <tromey@redhat.com>
3785
3786         * gdb.texinfo (Blocks In Python): Clarify block iteration.
3787
3788 2012-02-17  Tom Tromey  <tromey@redhat.com>
3789
3790         PR python/10753:
3791         * gdb.texinfo (objfile-gdb.py file): Fix location of auto-load
3792         directory.
3793
3794 2012-02-14  Stan Shebs  <stan@codesourcery.com>
3795
3796         * gdb.texinfo (Disabling Breakpoints): Document enable count.
3797
3798 2012-02-13  Pedro Alves  <palves@redhat.com>
3799
3800         * gdb.texinfo (MIPS boards): Refer to mips-elf instead of
3801         mips-idt-ecoff.
3802
3803 2012-02-09  Yao Qi  <yao@codesourcery.com>
3804
3805         * gdb.texinfo (Symbols In Python): Add missing `@end defvar'.
3806
3807 2012-02-07  Tom Tromey  <tromey@redhat.com>
3808
3809         * gdb.texinfo (Symbols In Python): Document Symbol.needs_frame and
3810         Symbol.value.
3811
3812 2012-02-07  Tom Tromey  <tromey@redhat.com>
3813
3814         * gdb.texinfo (Symbols In Python): Document Symbol.line.
3815
3816 2012-01-27  Thomas Schwinge  <thomas@codesourcery.com>
3817
3818         * gdb.textinfo (Packets): Move vCont paragraph to the correct place.
3819
3820 2012-01-24  Tom Tromey  <tromey@redhat.com>
3821
3822         * gdb.texinfo (Set Catchpoints): Document "catch load" and "catch
3823         unload".
3824         (Files): Mention new catch commands.
3825         (GDB/MI Async Records): Likewise.
3826
3827 2012-01-24  Gary Benson  <gbenson@redhat.com>
3828
3829         Delete #if 0'd out code.
3830         * gdb.texinfo (Frame Info): Remove "info catch".
3831
3832 2012-01-20  Ulrich Weigand  <ulrich.weigand@linaro.org>
3833
3834         * gdb.texinfo (Remote Configuration): Document
3835         "set remote hostio-readlink-packet" command.
3836         (General Query Packets): Document vFile:readlink packet.
3837
3838 2012-01-16  Tom Tromey  <tromey@redhat.com>
3839
3840         * gdb.texinfo (Specify Location): Document relative file name
3841         handling.
3842
3843 2012-01-16  Tom Tromey  <tromey@redhat.com>
3844
3845         * gdb.texinfo (gdb.printing): Document FlagEnumerationPrinter.
3846
3847 2012-01-13  Jan Kratochvil  <jan.kratochvil@redhat.com>
3848             Eli Zaretskii  <eliz@gnu.org>
3849
3850         * gdbint.texinfo (Coding Standards): Require braces for two lines of
3851         code.
3852
3853 2012-01-11  Paul Hilfinger  <hilfingr@adacore.com>
3854
3855         * gdb.texinfo (Variables): Document use of :: for non-static
3856         variables.
3857
3858 2012-01-05  Joel Brobecker  <brobecker@adacore.com>
3859
3860         * gdbint.texinfo (Start of New Year Procedure): Update
3861         to replace use of copyright.sh by use of copyright.py.
3862
3863 2012-01-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
3864
3865         Remove the gdbtui binary.
3866         * all-cfg.texi (GDBTUI): Remove.
3867         * gdb.texinfo (Mode Options): Remove the GDBTUI reference.
3868         (TUI): Remove GDBTUI pindex.  Remove the GDBTUI reference.
3869         * gdbint.texinfo (Testsuite): Replace `gdbtui' by `gdb -tui'.
3870
3871 2011-12-23  Kevin Pouget  <kevin.pouget@st.com>
3872
3873         Introduce gdb.FinishBreakpoint in Python.
3874         * gdb.texinfo (Finish Breakpoints in Python): New subsection.
3875         (Python API): Add menu entry for Finish Breakpoints.
3876
3877 2011-12-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
3878
3879         * gdbint.texinfo (Testsuite): Describe KFAIL and XFAIL in Writing
3880         tests.
3881
3882 2011-12-16  Doug Evans  <dje@google.com>
3883
3884         * gdb.texinfo (Server): Document -/stdio argument to gdbserver.
3885
3886 2011-12-16  Phil Muldoon  <pmuldoon@redhat.com>
3887
3888         * gdb.texinfo (Python Commands): Remove "maint set/show print
3889         stack".  Add documentation for "set/show python print-stack".
3890
3891 2011-12-14  Pedro Alves  <pedro@codesourcery.com>
3892
3893         * gdb.texinfo (Implementing a Remote Stub): Explain that you
3894         should transfer control to the stub in the startup code instead of
3895         in main.  Mention the need to get past the initial breakpoint.
3896
3897 2011-12-06  Tom Tromey  <tromey@redhat.com>
3898
3899         * gdb.texinfo (Set Breaks): Update for new behavior.
3900
3901 2011-12-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
3902
3903         * gdb.texinfo (Requirements, Remote Protocol): Reference also `Library
3904         List Format for SVR4 Targets'.
3905         (General Query Packets): New item qXfer:libraries-svr4:read.
3906         (Library List Format for SVR4 Targets): New node.
3907
3908 2011-12-01  Tom Tromey  <tromey@redhat.com>
3909
3910         * gdb.texinfo (Writing a Pretty-Printer): Use append method, not
3911         add.
3912
3913 2011-11-22  Tom Tromey  <tromey@redhat.com>
3914
3915         * gdb.texinfo (GDB/MI Async Records): Document new *stopped
3916         reasons.
3917
3918 2011-11-20  Stan Shebs  <stan@codesourcery.com>
3919
3920         * gdb.texinfo (Starting and Stopping Trace Experiments): Document
3921         note-related options and variables.
3922         (Tracepoint Packets): Document packet changes.
3923
3924 2011-11-20  Sanjoy Das  <sdas@igalia.com>
3925
3926         * gdb.texinfo (JIT Interface): Add documentation on writing and
3927         usind JIT debug info readers.
3928         (Custom Debug Info, Using JIT Debug Info Readers, Writing JIT
3929         Debug Info Readers): New nodes.
3930
3931 2011-11-18  Yao Qi  <yao@codesourcery.com>
3932
3933         * gdb.texinfo (Create and Delete Tracepoints): Mention pending
3934         tracepoint.
3935
3936 2011-11-15  Doug Evans  <dje@google.com>
3937
3938         * gdb.texinfo (Files): Document basenames-may-differ.
3939
3940 2011-11-14  Doug Evans  <dje@google.com>
3941
3942         * gdb.texinfo (Shell Commands): Document "!".
3943
3944 2011-11-14  Stan Shebs  <stan@codesourcery.com>
3945             Kwok Cheung Yeung  <kcy@codesourcery.com>
3946
3947         * gdb.texinfo (Create and Delete Tracepoints): Describe what is
3948         needed to get shorter fast tracepoints.
3949         (Tracepoint Packets): Document new qTMinFTPILen packet.
3950
3951 2011-11-14  Yao Qi  <yao@codesourcery.com>
3952
3953         * gdb.texinfo (Create and Delete Tracepoints): Describe changed
3954         behavior of tracepoint.
3955         (General Query Packets): New feature InstallInTrace.
3956         (Remote Configuration): Document "set remote
3957         install-in-trace-packet".
3958
3959 2011-11-12  Matt Rice  <ratmice@gmail.com>
3960
3961         * gdb.texinfo (C Preprocessor Macros): Remove info definitions.
3962         Add arguments to info macro.
3963
3964 2011-11-10  Tom Tromey  <tromey@redhat.com>
3965
3966         * gdb.texinfo (Compilation): Don't mention -gdwarf-2.  Link to GCC
3967         manual.
3968         (Variables): Don't mention -gdwarf-2.  Link to Compilation node.
3969         (Macros): Add a footnote.
3970         (C): Remove paragraph about compiler options.
3971         (C Constants): Mention wide character and string constants.
3972         (C Plus Plus Expressions): Update compiler option advice.  Mention
3973         using declarations.  Mention ADL.  Remove old HP compiler
3974         information.
3975
3976 2011-11-10  Tom Tromey  <tromey@redhat.com>
3977
3978         PR c++/9257:
3979         * gdb.texinfo (Print Settings): Add an extra note about the need
3980         for a vtable.
3981
3982 2011-11-08  Maciej W. Rozycki  <macro@codesourcery.com>
3983
3984         * gdb.texinfo (MIPS): Remove duplicate "auto" reference from
3985         "set mips abi" documentation.
3986
3987 2011-11-04  Doug Evans  <dje@google.com>
3988
3989         * gdb.texinfo (Maintenance Commands): Update docs of "maint time".
3990
3991 2011-11-03  Tom Tromey  <tromey@redhat.com>
3992
3993         * gdb.texinfo (Stopping): Add menu entry.
3994         (Continuing and Stepping): Restore @node.  Use @section, not
3995         @subsection.
3996
3997 2011-11-03  Maciej W. Rozycki  <macro@codesourcery.com>
3998
3999         * gdb.texinfo (Skipping Over Functions and Files): Remove node
4000         designation.  Fix "Specify Location" cross-reference.
4001
4002 2011-11-02  Stan Shebs  <stan@codesourcery.com>
4003
4004         * gdb.texinfo (Tracepoint Action Lists): Document collect/s.
4005         (General Query Packets): Describe tracenz feature.
4006         * agentexpr.texi (Bytecode Descriptions): Describe tracenz.
4007
4008 2011-10-28  Paul Koning  <paul_koning@dell.com>
4009
4010         * gdb.texinfo (gdb.types): Rename deepitems to deep_items.
4011
4012 2011-10-27  Kevin Pouget  <kevin.pouget@st.com>
4013
4014         * gdb.texinfo ((Frames In Python): Document
4015         gdb.FRAME_UNWIND_FIRST_ERROR contant.
4016
4017 2011-10-26  Paul Koning  <paul_koning@dell.com>
4018
4019         * gdb.texinfo (gdb.types): Document new deepitems function.
4020
4021 2011-10-25  Paul Koning  <paul_koning@dell.com>
4022
4023         PR python/13327
4024
4025         * gdb.texinfo (Values From Inferior): Add is_lazy attribute,
4026         fetch_lazy method.
4027
4028 2011-10-20  Phil Muldoon  <pmuldoon@redhat.com>
4029
4030         PR python/12656
4031
4032         * gdb.texinfo (Blocks In Python): Document is_static, is_global,
4033         global_block, static_block function.
4034
4035 2011-10-19  Tom Tromey  <tromey@redhat.com>
4036
4037         * gdb.texinfo (Commands In Python): Add missing "@"s.
4038
4039 2011-10-13  Kevin Pouget  <kevin.pouget@st.com>
4040
4041         PR python/13285 Document named constants for frame unwind stop reasons
4042         * gdb.texinfo (Frames In Python): Document gdb.FRAME_UNWIND_*
4043         constants.
4044
4045 2011-10-12  Jan Kratochvil  <jan.kratochvil@redhat.com>
4046
4047         Fix compatibility with texinfo versions older than 4.12.
4048         * Makefile.in (MAKEINFO): Set to @MAKEINFO@.
4049         (MAKEINFOFLAGS, MAKEINFO_EXTRA_FLAGS, MAKEINFO_CMD): New.
4050         (MAKEHTMLFLAGS): Use MAKEINFO_CMD.
4051         (gdb.info, gdbint.info, stabs.info, annotate.info): Use MAKEINFO_CMD.
4052         * gdb.texinfo (Tail Call Frames): Convert @arrow{} to @click, when possible.
4053         Make the conversion conditional on HAVE_MAKEINFO_CLICK, using variables
4054         CALLSEQ1A, CALLSEQ1B, CALLSEQ2A and CALLSEQ2B.
4055
4056 2011-10-09  Doug Evans  <dje@google.com>
4057
4058         * gdb.texinfo (Extending GDB): Document alias command.
4059
4060 2011-10-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
4061
4062         Support @entry in input expressions.
4063         * gdb.texinfo (Variables): Describe @entry names suffix.
4064         (Print Settings): Add anchor for `set print entry-values'.
4065
4066 2011-10-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
4067             Eli Zaretskii  <eliz@gnu.org>
4068
4069         Display @entry parameter values (without references).
4070         * gdb.texinfo (Tail Call Frames): Add anchor.  Add self tail call
4071         example.
4072         (Print Settings): New description of set print entry-values and show
4073         print entry-values.
4074
4075 2011-10-09  Jan Kratochvil  <jan.kratochvil@redhat.com>
4076             Eli Zaretskii  <eliz@gnu.org>
4077
4078         Recognize virtual tail call frames.
4079         * gdb.texinfo (Optimized Code): Add reference to Tail Call Frames.
4080         (Tail Call Frames): New node.
4081         (Frames In Python): Add gdb.TAILCALL_FRAME.
4082
4083 2011-10-07  Doug Evans  <dje@google.com>
4084
4085         * gdb.texinfo (gdb.printing): Document new `replace' arg to
4086         register_pretty_printer.
4087
4088 2011-10-07  Phil Muldoon  <pmuldoon@redhat.com>
4089
4090         PR python/12930
4091         PR python/12802
4092
4093         * gdb.texinfo (Breakpoints In Python): Clarify behavior in the
4094         stop method.
4095
4096 2011-10-07  Ulrich Weigand  <ulrich.weigand@linaro.org>
4097
4098         * gdb.texinfo (Starting your Program): "set disable-randomization"
4099         is no longer Linux-specific.
4100         (Remote Configuration): Document "set remote
4101         disable-randomization-packet".
4102         (General Query Packets): Document "QDisableRandomization" packet
4103         and add it to "qSupported" list.
4104
4105 2011-10-07  Kevin Pouget  <kevin.pouget@st.com>
4106
4107         Allow Python notification of new object-file loadings.
4108         * gdb.texinfo (Events In Python): Document `gdb.NewObjFileEvent'
4109         event type.
4110
4111 2011-10-04  Kevin Pouget  <kevin.pouget@st.com>
4112
4113         PR python/12691: Add the inferior to Python exited event
4114         * gdb.texinfo (Events In Python): Describe exited inferior attribute.
4115
4116 2011-10-03  Joel Brobecker  <brobecker@adacore.com>
4117
4118         * gdb.texinfo (GDB/MI Miscellaneous Commands): Minor
4119         rephasing.
4120
4121 2011-10-03  Joel Brobecker  <brobecker@adacore.com>
4122
4123         * gdb.texinfo (GDB/MI Ada Tasking Commands): New node.
4124         (GDB/MI Miscellaneous Commands): Add `ada-task-info'
4125         as possible feature returned by the `-list-features'
4126         command.
4127
4128 2011-09-28  Paul Koning  <paul_koning@dell.com>
4129
4130         * gdb.texinfo (gdb.Type): Document field access by dictionary
4131         key syntax.
4132
4133 2011-09-28  Yao Qi  <yao@codesourcery.com>
4134
4135         * gdb.texinfo (Files): Update options for `add-symbol-file'.
4136         Add one space after option `-s'.  Remove @r{} markup.
4137
4138 2011-09-27  Stan Shebs  <stan@codesourcery.com>
4139
4140         * gdb.texinfo (Tracepoint Action Lists): Document $_ret.
4141
4142 2011-09-16  Hui Zhu  <teawater@gmail.com>
4143
4144         * gdb.texinfo (Tracepoint Restrictions): Change *$esp@300
4145         to *(unsigned char *)$esp@300.
4146
4147 2011-09-15  Paul Koning  <paul_koning@dell.com>
4148
4149         * gdb.texinfo: Make style of Python functions and methods match
4150         the syntax of Python.  Also put class and module names explicitly
4151         on function, member, and variable names, matching Python
4152         documentation conventions.
4153
4154 2011-09-15  Kevin Pouget  <kevin.pouget@st.com>
4155
4156         PR Python/12692 Add gdb.selected_inferior() to Python interface.
4157         * gdb.texinfo (Inferiors In Python): Describe new
4158         gdb.selected_inferior() function.
4159
4160 2011-09-15  Kevin Pouget  <kevin.pouget@st.com>
4161
4162         Handle multiple breakpoint hits in Python interface:
4163         * gdb.texinfo (Events In Python): New function documentation:
4164         gdb.BreakpointEvent.breakpoints. Indicate that
4165         gdb.BreakpointEvent.breakpoint is now deprecated.
4166
4167 2011-09-04  Joel Brobecker  <brobecker@adacore.com>
4168
4169         * gdb.texinfo: Set EDITION to "Tenth" and change ISBN.
4170
4171 2011-08-25  Andrew Oakley  <andrew@ado.is-a-geek.net>
4172
4173         * gdb.texinfo (Types In Python): Document 'bitpos' for enums.
4174
4175 2011-08-17  Phil Muldoon  <pmuldoon@redhat.com>
4176
4177         * gdb.texinfo (Prompt): Add set/show extended-prompt
4178         documentation
4179         (Basic Python): Add prompt_hook anchor.
4180         (Python modules): Reword module text to reflect multiple modules.
4181         (gdb.prompt): Document gdb.prompt module.
4182
4183 2011-08-14  Yao Qi  <yao@codesourcery.com>
4184
4185         * gdb.texinfo (General Query Packets): Document qXfer:fdpic:read packet.
4186
4187 2011-08-14  Yao Qi  <yao@codesourcery.com>
4188
4189         * gdb.texinfo (Standard Target Features): Document C6x features.
4190         (TIC6x Features): New node.
4191
4192 2011-08-12  Doug Evans  <dje@google.com>
4193
4194         * gdb.texinfo (Symbols In Python): Document symbol.type.
4195
4196 2011-08-09  Phil Muldoon  <pmuldoon@redhat.com>
4197
4198         * gdb.texinfo (Python): Document command and function
4199         auto-loading.
4200
4201 2011-07-26  Jan Kratochvil  <jan.kratochvil@redhat.com>
4202             Eli Zaretskii  <eliz@gnu.org>
4203
4204         * gdb.texinfo (whatis, ptype): Highlight their differences.  Describe
4205         typedefs unrolling.  Extend the sample code by an inner typedef and
4206         outer typedefs unrolling.
4207
4208 2011-07-26  Paul Pluzhnikov  <ppluzhnikov@google.com>
4209
4210         * gdb.texinfo (Caching Remote Data): Document {set,show} dcache
4211         size and line-size.
4212
4213 2011-07-21  Matt Rice  <ratmice@gmail.com>
4214
4215         PR macros/12999
4216         * gdb.texinfo (Macros): Add info definitions and info macros commands.
4217         Update text and cindex entries for info macro command.
4218
4219 2011-07-21  Phil Muldoon  <pmuldoon@redhat.com>
4220
4221         * observer.texi (GDB Observers): Add before_prompt observer.
4222         * gdb.texinfo (Basic Python): Add documentation for prompt
4223         substitution.
4224
4225 2011-07-11  Phil Muldoon  <pmuldoon@redhat.com>
4226
4227         PR python/12438
4228         * gdb.texinfo (Python Commands): Add deprecate note to maint
4229           set/show python print-stack.  Document set/show python
4230           print-backtrace.
4231
4232 2011-07-05  Thiago Jung Bauermann  <bauerman.ibm.com>
4233
4234         * gdb.texinfo: Fix typos.
4235
4236 2011-07-01  Tom Tromey  <tromey@redhat.com>
4237
4238         * gdb.texinfo (Debugging Output): Document set debug
4239         check-physname.
4240
4241 2011-06-29  Tom Tromey  <tromey@redhat.com>
4242
4243         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document
4244         breakpoint-notifications feature.
4245
4246 2011-06-29  Ulrich Weigand  <ulrich.weigand@linaro.org>
4247
4248         * gdb.texinfo (Target Description): Remove warning about
4249         possibly unstable format.
4250
4251 2011-06-03  Tom Tromey  <tromey@redhat.com>
4252
4253         * gdb.texinfo (GDB/MI Async Records): Document 'exit-code' field.
4254         (Events In Python): Note that exit_code is optional.
4255
4256 2011-05-17  Pedro Alves  <pedro@codesourcery.com>
4257
4258         * gdb.texinfo (Remote Protocol) <Overview>: Mention vCont is
4259         required for multi-threading support.
4260         (Remote Protocol) <Packets>: Mention that 'c', 's', 'C', 'S' and
4261         Hc are deprecated for multi-threading debugging.  Point readers at
4262         the vCont packet.
4263
4264 2011-05-15  Doug Evans  <dje@google.com>
4265
4266         * gdb.texinfo (Auto-loading): Document printing of missing scripts.
4267
4268 2011-05-13  Doug Evans  <dje@google.com>
4269
4270         * gdb.texinfo (Threads): Document $sdir,$pdir.
4271         (Server): Document $pdir exception.
4272
4273         * gdb.texinfo (Auto-loading): Document "info auto-load-scripts".
4274
4275         * gdb.texinfo (Threads): Clarify default value for
4276         libthread-db-search-path.
4277
4278         * gdb.texinfo (Completion): Update example.
4279         (Debugging Output): Delete `set/show debug lin-lwp-async'.
4280
4281 2011-05-12  Kwok Cheung Yeung  <kcy@codesourcery.com>
4282
4283         * gdb.texinfo: Document change in the behaviour of the enable and
4284         disable GDB commands when applied to tracepoints.
4285         Document the EnableDisableTracepoints remote stub feature.
4286         Document QTEnable and QTDisable in the list of tracepoint packets.
4287
4288 2011-05-11  Jan Kratochvil  <jan.kratochvil@redhat.com>
4289
4290         * Makefile.in (GDB_DOC_SOURCE_INCLUDES): Rename inc-hist.texinfo to
4291         hsuser.texi.
4292         * gdb.texinfo <!SYSTEM_READLINE>: Rename inc-hist.texinfo inclusion and
4293         comment to hsuser.texi.  Change rluser.texi name in the comment.
4294
4295 2011-05-10  Doug Evans  <dje@google.com>
4296
4297         * gdb.texinfo (Threads): If an empty path is provided for
4298         libthread-db-search-path it is reset to its default value.
4299         (Server): Ditto.
4300
4301 2011-05-09  Doug Evans  <dje@google.com>
4302
4303         * gdb.texinfo (Requirements): Fix typo.  Mention --with-iconv-bin.
4304
4305 2011-05-06  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
4306             Thiago Jung Bauermann  <bauerman@br.ibm.com>
4307
4308         Implement support for PowerPC BookE masked watchpoints.
4309         * gdb.texinfo (Set Watchpoints): Document mask parameter.
4310         (PowerPC Embedded): Mention support of masked watchpoints.
4311
4312 2011-05-03  Joel Brobecker  <brobecker@adacore.com>
4313
4314         * gdb.texinfo (In Memoriam): Replace litteral uses of `GDB' with
4315         `@value{GDBN}'.
4316
4317 2011-05-03  Joel Brobecker  <brobecker@adacore.com>
4318
4319         * gdb.texinfo (titlepage): Remove dedication.
4320         (In Memoriam): New appendix.
4321
4322 2011-04-27  Jan Kratochvil  <jan.kratochvil@redhat.com>
4323             Eli Zaretskii  <eliz@gnu.org>
4324
4325         * gdb.texinfo (Index Section Format): Change the version to 5.
4326         Describe the different formula.
4327
4328 2011-04-24  Jan Kratochvil  <jan.kratochvil@redhat.com>
4329             Eli Zaretskii  <eliz@gnu.org>
4330
4331         * gdb.texinfo (Starting and Stopping Trace Experiments): New anchor
4332         for disconnected tracing.
4333         (Multi-Process Mode for @code{gdbserver}): Mention --multi and
4334         extended-remote relationship.  Mention --once.
4335         (TCP port allocation lifecycle of @code{gdbserver}): New.
4336
4337 2011-04-23  Eli Zaretskii  <eliz@gnu.org>
4338
4339         * gdb.texinfo (Server): Improve indexing.  Index all optional
4340         switches to gdbserver.
4341
4342 2011-04-20  Tom Tromey  <tromey@redhat.com>
4343
4344         * gdb.texinfo (Index Section Format): New node.
4345         (Top): Add new node to menu.
4346
4347 2011-04-20  Pedro Alves  <pedro@codesourcery.com>
4348
4349         * gdb.texinfo (Maintenance Commands): Document `maint print
4350         remote-registers'.
4351
4352 2011-04-20  Tom Tromey  <tromey@redhat.com>
4353
4354         * gdb.texinfo (Trace File Format): Move node later.
4355
4356 2011-04-19  Tom Tromey  <tromey@redhat.com>
4357
4358         * gdbint.texinfo (Register Information Functions): Remove
4359         duplicate "the".
4360         * gdb.texinfo (Emacs): Remove duplicate "to".
4361         (GDB/MI Variable Objects): Remove duplicate "the".
4362         (General Query Packets): Likewise.
4363
4364 2011-04-02  Joel Brobecker  <brobecker@adacore.com>
4365
4366         * gdb.texinfo (GDB/MI Output Records): Fix menu entry for
4367         "GDB/MI Ada Exception Information" node.
4368
4369 2011-04-01  Joel Brobecker  <brobecker@adacore.com>
4370
4371         * gdb.texinfo (GDB/MI Ada Exception Information): Document
4372         the "exception-name" field in the *stopped async record.
4373
4374 2011-03-31  Thiago Jung Bauermann  <bauerman@br.ibm.com>
4375             Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
4376
4377         Implement support for PowerPC BookE ranged breakpoints.
4378         * gdb.texinfo (PowerPC Embedded): Document ranged breakpoints.
4379
4380 2011-03-28  Tom Tromey  <tromey@redhat.com>
4381
4382         * gdb.texinfo (Set Tracepoints): Fix typo.
4383
4384 2011-03-24  Tom Tromey  <tromey@redhat.com>
4385
4386         * gdb.texinfo (Specify Location): Document `function:label'
4387         linespec.
4388
4389 2011-03-18  Phil Muldoon  <pmuldoon@redhat.com>
4390
4391         PR python/12149
4392
4393         * gdb.texinfo (Basic Python): Update gdb.write and flush text.
4394
4395 2011-03-17  Phil Muldoon  <pmuldoon@redhat.com>
4396
4397         * gdb.texinfo (Blocks In Python): Add is_valid method description.
4398         (Inferiors In Python): Likewise.
4399         (Threads In Python): Likewise.
4400         (Symbols In Python): Likewise.
4401         (Objfiles In Python): Likewise.
4402         (Symbol Tables In Python): Likewise.
4403
4404 2011-03-15  Pedro Alves  <pedro@codesourcery.com>
4405
4406         * gdb.texinfo (Auto Display) <undisplay, enable display, disable
4407         display>: Explain that the commands accept number ranges.
4408
4409 2011-03-14  Phil Muldoon  <pmuldoon@redhat.com>
4410
4411         * gdb.texinfo (Breakpoints In Python): Add description and example
4412         of Python stop function operation.
4413
4414 2011-03-10  Phil Muldoon  <pmuldoon@redhat.com>
4415
4416         * gdb.texinfo (Parameters In Python): Document get_set_string and
4417         get_show_string methods.
4418
4419 2011-02-28  Jan Kratochvil  <jan.kratochvil@redhat.com>
4420
4421         * gdb.texinfo (Tracepoint Conditions): Fix missing parenthesis.
4422
4423         * gdb.texinfo (Starting and Stopping Trace Experiments): Fix
4424         circular-trace-buffer name.
4425
4426 2011-02-28  Joel Brobecker  <brobecker@adacore.com>
4427
4428         * gdb.texinfo (Inferiors and Programs): Fix small error introduced
4429         in the previous change.
4430
4431 2011-02-27  Michael Snyder  <msnyder@vmware.com>
4432
4433         * gdb.texinfo (Inferiors and Programs): Update commands to show
4434         that they can accept multiple arguments.
4435
4436 2011-02-24  Joel Brobecker  <brobecker@adacore.com>
4437
4438         Revert the following patch (code patch was not approved):
4439         2011-02-21  Hui Zhu  <teawater@gmail.com>
4440         * agentexpr.texi (bytecode descriptions): add printf.
4441         * gdb.texinfo (tracepoint action lists): add printf.
4442
4443 2011-02-23  Doug Evans  <dje@google.com>
4444
4445         * gdb.texinfo (Symbols In Python): Fix mention of C++, use C@t{++}.
4446
4447 2011-02-23  Michael Snyder  <msnyder@vmware.com>
4448
4449         * gdb.texinfo (Set Breaks): Add @dots{} to arguments of info break.
4450         (Set Watchpoints): Add @dots{} to argument of info watchpoints.
4451         (Listing Tracepoints): Add @dots{} to argument of info tracepoints.
4452
4453 2011-02-22  Doug Evans  <dje@google.com>
4454
4455         * gdb.texinfo (Symbols In Python): Document lookup_global_symbol.
4456         Clarify behaviour of lookup_symbol when `block' argument is omitted,
4457         add description of result, fix @defun formatting.
4458
4459 2011-02-21  Hui Zhu  <teawater@gmail.com>
4460
4461         * agentexpr.texi (Bytecode Descriptions): Add printf.
4462         * gdb.texinfo (Tracepoint Action Lists): Add printf.
4463
4464 2011-02-18  Tom Tromey  <tromey@redhat.com>
4465
4466         * agentexpr.texi (Bytecode Descriptions): Document pick and rot.
4467
4468 2011-02-14  Michael Snyder  <msnyder@vmware.com>
4469
4470         * gdb.texinfo (threads): Document argument for "info threads" cmd.
4471         Document new command "thread find".
4472
4473 2011-02-14  Michael Snyder  <msnyder@vmware.com>
4474
4475         * gdb.texinfo (Threads): Update example of new thread message.
4476
4477 2011-02-14  Pedro Alves  <pedro@codesourcery.com>
4478
4479         * gdb.texinfo (Remote Configuration): Mention set/show remote
4480         traceframe-info.
4481         (Tools/Packages Optional for Building GDB): Mention that expat is
4482         used for traceframe info.
4483         (Remote Protocol) <Menu>: Add "Traceframe Info Format".
4484         (General Query Packets) <qSupported>: Describe the
4485         qXfer:traceframe-info:read feature.
4486         (qXfer::read): Describe qXfer:traceframe-info:read.
4487         (Traceframe Info Format): New section.
4488
4489 2011-02-04  Pedro Alves  <pedro@codesourcery.com>
4490
4491         * gdbint.texinfo (Formatting): Mention some formatting guidelines
4492         for casts and unary operators.
4493
4494 2011-02-04  Tom Tromey  <tromey@redhat.com>
4495
4496         * gdb.texinfo (GDB/MI Async Records): Document that symbols-loaded
4497         is not useful.
4498
4499 2011-01-25  Pedro Alves  <pedro@codesourcery.com>
4500
4501         * gdb.texinfo: s/value optimized out/optimized out/g
4502
4503 2011-01-21  Joel Brobecker  <brobecker@adacore.com>
4504
4505         * gdb.texinfo (Other Misc Settings): Rework part of the
4506         documentation of the "set interactive mode" command.
4507
4508 2011-01-19  Tom Tromey  <tromey@redhat.com>
4509
4510         * gdb.texinfo (Threads): Document thread name output and `thread
4511         name' command.
4512         (Threads In Python): Document Thread.name attribute.
4513         (GDB/MI Thread Commands): Document thread attributes.
4514
4515 2011-01-12  Andrew Burgess  <aburgess@broadcom.com>
4516
4517         * gdb.texinfo (GDB/MI Data Manipulation): Update to reflect
4518         changes in mi/mi-cmd-disas.c
4519
4520 2011-01-12  Tom Tromey  <tromey@redhat.com>
4521
4522         * gdb.texinfo (Threads): Remove duplicate text.  Update examples.
4523         Fix "thread apply" text.
4524
4525 2011-01-11  Sergio Durigan Junior  <sergiodj@linux.vnet.ibm.com>
4526             Thiago Jung Bauermann  <bauerman@br.ibm.com>
4527
4528         Implement support for PowerPC BookE ranged watchpoints.
4529         * gdb.texinfo (PowerPC Embedded): Document ranged watchpoints and
4530         the "set powerpc exact-watchpoints" flag.
4531
4532 2011-01-07  Tom Tromey  <tromey@redhat.com>
4533
4534         * gdb.texinfo (Python API): Add descriptions to @menu items.
4535
4536 2011-01-06  Tom Tromey  <tromey@redhat.com>
4537
4538         * gdb.texinfo (Frames In Python): Document gdb.newest_thread.
4539
4540 2010-01-06  Paul Pluzhnikov  <ppluzhnikov@google.com>
4541
4542         * gdb.texinfo (Debugging Output): Document "set debug jit".
4543
4544 2011-01-06  Tom Tromey  <tromey@redhat.com>
4545
4546         PR python/12133:
4547         * gdb.texinfo (Frames In Python): Document various frame
4548         constants.
4549
4550 2011-01-05  Joel Brobecker  <brobecker@adacore.com>
4551
4552         * doc/agentexpr.texi, doc/all-cfg.texi, doc/annotate.texinfo,
4553         doc/gdb.texinfo, doc/gdbint.texinfo, doc/observer.texi,
4554         doc/refcard.tex, doc/stabs.texinfo: Copyright year update.
4555
4556 2011-01-03  Jan Kratochvil  <jan.kratochvil@redhat.com>
4557
4558         * Makefile.in (diststuff): Remove gdb-cfg.texi and GDBvn.texi.
4559         (clean): Add GDBvn.texi.
4560
4561 2010-12-29  Joel Brobecker  <brobecker@adacore.com>
4562
4563         * gdb.texinfo (Ada Glitches): Remove paragraph describing the
4564         occasional case where the debugger prints an array address
4565         instead of the array itself.
4566
4567 2010-12-23  Pedro Alves  <pedro@codesourcery.com>
4568
4569         * gdb.texinfo (Packets) <read registers packet>: Document support
4570         for registers that were not collected.
4571
4572 2010-12-15  Doug Evans  <dje@google.com>
4573
4574         * gdb.texinfo (Startup): Document auto-loading of scripts during
4575         startup.
4576         (Auto-loading): Delete "maint set python auto-load on|off".
4577         Add "set auto-load-scripts on|off".
4578
4579 2010-12-07  Doug Evans  <dje@google.com>
4580
4581         * gdb.texinfo (Mode Options): Document -data-directory.
4582         (Data Files): Add reference to -data-directory.
4583
4584 2010-11-29  Doug Evans  <dje@google.com>
4585
4586         * gdb.texinfo (Pretty-Printer Introduction): Change
4587         printer-name:subprinter-name to printer-name;subprinter-name.
4588
4589 2010-11-29  Phil Muldoon  <pmuldoon@redhat.com>
4590
4591         PR python/12199
4592
4593         * gdb.texinfo (Breakpoints In Python): Document "delete" method.
4594
4595 2010-11-23  Tom Tromey  <tromey@redhat.com>
4596
4597         * gdb.texinfo (Top): Check SYSTEM_READLINE.
4598         (Editing): Likewise.
4599         (Command History): Likewise.
4600         (TUI Keys): Likewise.
4601         (Bug Reporting): Conditionally include rluser.texi and
4602         inc-history.texinfo.
4603         * Makefile.in (READLINE_TEXI_INCFLAG): New variable.
4604         (GDB_DOC_SOURCE_INCLUDES): Add comment.
4605         (GDBvn.texi): Set SYSTEM_READLINE when appropriate.
4606         (gdb.dvi): Use READLINE_TEXI_INCFLAG.
4607         (gdb.pdf): Likewise.
4608         (gdb.info): Likewise.
4609         (gdb/index.html): Likewise.
4610
4611 2010-11-23  Tom Tromey  <tromey@redhat.com>
4612
4613         * Makefile.in (Makefile): Run ../config.status.
4614         (distclean): Update.
4615         * configure: Remove.
4616         * configure.ac: Remove.
4617
4618 2010-11-12  Tom Tromey  <tromey@redhat.com>
4619
4620         * gdb.texinfo (Basic Python): Update.  Add xref.
4621         (Exception Handling): Document new exception classes.
4622         (Types In Python): Update.
4623         (Frames In Python): Update.
4624
4625 2010-11-11  Phil Muldoon  <pmuldoon@redhat.com>
4626
4627         * gdb.texinfo (Breakpoints In Python): Document "internal"
4628         parameter, and visible attribute.
4629
4630 2010-11-05  Doug Evans  <dje@google.com>
4631
4632         * gdb.texinfo (Source Path): Document "set directories".
4633
4634 2010-11-05  Ken Werner  <ken.werner@de.ibm.com>
4635
4636         * gdb.texinfo: (Summary) Add mention about OpenCL C language support.
4637         (OpenCL C): New node.
4638
4639 2010-11-02  Doug Evans  <dje@google.com>
4640
4641         * gdb.texinfo (Pretty Printing): Expand into three sections,
4642         introduction, example, and commands.
4643         (Python API): Delete section Disabling Pretty-Printers, merge into
4644         Selecting Pretty-Printers.
4645         (Writing a Pretty-Printer): New section.  Move the pretty-printer
4646         example here, and reformat to match python coding style.  Add a second
4647         example using the gdb.printing module.
4648         (Python modules): Add gdb.printing.
4649
4650 2010-10-29  Doug Evans  <dje@google.com>
4651
4652         * gdb.texinfo (Python): Fix long line.
4653
4654 2010-10-20  Doug Evans  <dje@google.com>
4655
4656         * gdbint.texinfo (Misc Guidelines): Renamed from Coding.
4657         All references updated.  Correct sections marked as subsections.
4658         (Coding Standards): New chapter.  Move the coding standard related
4659         subsections here.  Add section on Python coding standards.
4660
4661 2010-10-13  Doug Evans  <dje@google.com>
4662
4663         * gdb.texinfo (Python): Add "Python modules".
4664         (Types in Python): Add reference to gdb.types section.
4665         (Python modules): New node.
4666
4667 2010-10-11  Doug Evans  <dje@google.com>
4668
4669         * gdb.texinfo (Values From Inferior): Add reference to "Types in
4670         Python" from gdb.Value.type description.
4671
4672 2010-09-28  Joel Brobecker  <brobecker@adacore.com>
4673
4674         * gdb.texinfo (Ravenscar Profile): New node.
4675
4676 2010-09-22  Tom Tromey  <tromey@redhat.com>
4677
4678         * gdb.texinfo (Values From Inferior): Mention Value.__init__.
4679
4680 2010-09-22  Eli Zaretskii  <eliz@gnu.org>
4681
4682         * gdb.texinfo (Values From Inferior): Clarify that
4683         value.dynamic_type works only in C++ programs with RTTI.
4684
4685 2010-09-15  Paul Bolle  <pebolle@tiscali.nl>
4686
4687         * gdb.texinfo (Character Sets): Correctly reference host-charset
4688         in example.
4689
4690 2010-09-13  Tom Tromey  <tromey@redhat.com>
4691
4692         * gdb.texinfo (GDB/MI Stack Manipulation) <-stack-list-frames>:
4693         Document "fullname" and "from".
4694
4695 2010-09-01  Marc Khouzam  <marc.khouzam@ericsson.com>
4696
4697         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document new
4698         feature `reverse' output by -list-target-features.
4699
4700 2010-08-31  H.J. Lu  <hongjiu.lu@intel.com>
4701
4702         * gdb.texinfo (i386 Features): Remove an extra "@item".
4703
4704 2010-08-30  Tom Tromey  <tromey@redhat.com>
4705
4706         PR python/11792:
4707         * gdb.texinfo (Values From Inferior): Document dynamic_type.
4708
4709 2010-08-24  Daniel Jacobowitz  <dan@codesourcery.com>
4710
4711         * gdb.texinfo (ARM Features): Document
4712         org.gnu.gdb.arm.m-profile.
4713
4714 2010-08-23  Tom Tromey  <tromey@redhat.com>
4715
4716         PR python/11145:
4717         * gdb.texinfo (Values From Inferior): Document dynamic_cast and
4718         reinterpret_cast methods.
4719
4720 2010-08-23  Tom Tromey  <tromey@redhat.com>
4721
4722         PR python/11915:
4723         * gdb.texinfo (Types In Python): Document array method.
4724
4725 2010-08-18  Thiago Jung Bauermann  <bauerman@br.ibm.com>
4726
4727         * gdb.texinfo (PowerPC Embedded): Mention support for the DVC register.
4728
4729 2010-08-16   Tom Tromey  <tromey@redhat.com>
4730
4731         * gdb.texinfo (Set Watchpoints): Document -location option.
4732
4733 2010-08-13  Doug Evans  <dje@google.com>
4734
4735         * gdb.texinfo (.debug_gdb_scripts section): Fix typo.
4736
4737 2010-08-13  Vladimir Prus  <vladimir@codesourcery.com>
4738
4739         * gdb.texinfo (GDB/MI Data Manipulation): Document
4740         -data-read-memory-raw and -data-write-memory-raw.
4741
4742 2010-08-11  Tom Tromey  <tromey@redhat.com>
4743             Phil Muldoon <pmuldoon@redhat.com>
4744
4745         * gdb.texinfo (Basic Python): Describe post_event API.
4746
4747 2010-08-11  Phil Muldoon  <pmuldoon@redhat.com>
4748
4749         * gdb.texinfo (Basic Python): Describe solib_address and
4750         decode_line Python APIs
4751
4752 2010-08-10  Tom Tromey  <tromey@redhat.com>
4753
4754         * gdb.texinfo (Pretty Printing API): Document
4755         gdb.default_visualizer.
4756
4757 2010-08-10  Tom Tromey  <tromey@redhat.com>
4758
4759         Revert gdb-add-index addition:
4760         * gdb.texinfo (Index Files): Don't document gdb-add-index.
4761
4762 2010-08-07  Jan Kratochvil  <jan.kratochvil@redhat.com>
4763             Eli Zaretskii <eliz@gnu.org>
4764
4765         * gdb.texinfo (Mode Options) <-batch>
4766         (Basic Python) <gdb.execute>: Describe setting width and height.
4767
4768 2010-07-31  Paul Pluzhnikov  <ppluzhnikov@google.com>
4769
4770         * gdb.texinfo (Threads): Document 'debug libthread-db'.
4771
4772 2010-07-30  Tom Tromey  <tromey@redhat.com>
4773
4774         * gdb.texinfo (Index Files): Mention gdb-add-index.
4775
4776 2010-07-30  Hui Zhu  <teawater@gmail.com>
4777
4778         * gdb.texinfo (Inferiors and Programs): Update the introduce of
4779         "detach inferior" and "kill inferior".
4780
4781 2010-07-28  CHENG Renquan  <rqcheng@smu.edu.sg>
4782
4783         * gdb.texinfo (Machine Code): Update description of two forms of
4784         arguments, and add new example to demonstrate the new form.
4785
4786 2010-07-27  Phil Muldoon  <pmuldoon@redhat.com>
4787
4788         * gdb.texinfo (Values From Inferior): Add value inferior function
4789         call description.
4790
4791 2010-07-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
4792
4793         * gdb.texinfo (Active Targets): Fix wrong comma placement.
4794
4795 2010-07-19  Jan Kratochvil  <jan.kratochvil@redhat.com>
4796             Eli Zaretskii  <eliz@gnu.org>
4797
4798         Make core files the process_stratum.
4799         * gdb.texinfo (Active Targets): Remove core_stratum.  Include
4800         record_stratum example.
4801
4802 2010-07-13  Tom Tromey  <tromey@redhat.com>
4803
4804         * gdb.texinfo (Index Files): New node.
4805
4806 2010-07-13  Tom Tromey  <tromey@redhat.com>
4807
4808         * gdb.texinfo (GDB/MI Variable Objects): Remove extra 'for'.
4809
4810 2010-07-13  Tom Tromey  <tromey@redhat.com>
4811
4812         * gdb.texinfo (Specify Location): Document labels.
4813
4814 2010-07-01  Pedro Alves  <pedro@codesourcery.com>
4815
4816         * gdb.texinfo (Create and Delete Tracepoints): Add more index
4817         entries for fast tracepoints and static tracepoints.
4818
4819 2010-07-01  Pedro Alves  <pedro@codesourcery.com>
4820
4821         * gdb.texinfo (General Query Packets) <qfThreadInfo,
4822         qsThreadInfo>: Spell out `l' as ell.
4823
4824 2010-07-01  Pedro Alves  <pedro@codesourcery.com>
4825
4826         * gdb.texinfo (Convenience Variables): Document $_sdata.
4827         (Commands to Set Tracepoints): Describe static tracepoints.  Add
4828         `Listing Static Tracepoint Markers' menu entry.  Document
4829         "strace".
4830         (Tracepoint Action Lists): Document collecting $_sdata.
4831         (Listing Static Tracepoint Markers): New subsection.
4832         (Tracepoints support in gdbserver): Mention static tracepoints.
4833         (remote packets, enabling and disabling): Mention
4834         read-sdata-object.
4835         (General Query Packets) <qSupported>: Document qXfer:sdata:read
4836         and StaticTracepoint.
4837         Mention qTfSTM, qTsSTM and qTSTMat as tracepoint packets.
4838         Document qXfer:sdata:read.
4839         (Tracepoint packets): Document qTfSTM, qTsSTM and qTSTMat.
4840
4841 2010-06-29  Joel Brobecker  <brobecker@adacore.com>
4842
4843         * gdb.texinfo (Threads In Python): Fix unmatched @end table.
4844
4845 2010-06-28  Phil Muldoon  <pmuldoon@redhat.com>
4846             Tom Tromey  <tromey@redhat.com>
4847             Thiago Jung Bauermann  <bauerman@br.ibm.com>
4848
4849         * gdb.texinfo (Inferiors In Python): New node.
4850         * gdb.texinfo (Threads In Python): New node.
4851
4852 2010-06-28  Joel Brobecker  <brobecker@adacore.com>
4853
4854         * gdb.texinfo (Python): Document what the python directory is
4855         and what its location is.
4856         (Basic Python): Document the gdb.PYTHONDIR constant.
4857
4858 2010-06-25  Tom Tromey  <tromey@redhat.com>
4859
4860         PR python/10808:
4861         * gdb.texinfo (Basic Python): Document new gdb.execute argument.
4862
4863 2010-06-24  Hui Zhu  <teawater@gmail.com>
4864
4865         * gdb.texinfo: (Commands for Controlled Output): Add
4866         documentation for command "eval".
4867
4868 2010-06-21  Stan Shebs  <stan@codesourcery.com>
4869
4870         * gdb.texinfo: Add explicit @node and @appendix for GFDL.
4871         * annotate.texinfo: Ditto.
4872         * gdbint.texinfo: Ditto.
4873         * stabs.texinfo: Ditto.
4874
4875 2010-06-22  Hui Zhu  <teawater@gmail.com>
4876
4877         * gdb.texinfo: (Process Record and Replay): Add documentation
4878         for command "set record memory-query".
4879
4880 2010-06-21  Stan Shebs  <stan@codesourcery.com>
4881
4882         * gdb.texinfo: Relicense under GFDL version 1.3.
4883         * annotate.texinfo: Relicense under GFDL version 1.3.
4884         * gdbint.texinfo: Relicense under GFDL version 1.3.
4885         * stabs.texinfo: Relicense under GFDL version 1.3.
4886         * fdl.texi: Update to version 1.3.
4887
4888 2010-06-18  Stan Shebs  <stan@codesourcery.com>
4889
4890         * gdb.texinfo (Operating System Auxiliary Information): Describe
4891         "info os" when no arguments given.
4892
4893         * gdb.texinfo (Debugging Programs with Multiple Threads): Describe
4894         $_thread.
4895
4896 2010-06-18  Hui Zhu  <teawater@gmail.com>
4897
4898         * gdb.texinfo: (Process Record and Replay): Add documentation
4899         for commands "record save" and "record restore".
4900
4901 2010-06-16  Jan Kratochvil  <jan.kratochvil@redhat.com>
4902
4903         * gdb.texinfo: Include information about the correct use
4904         of addresses in the `watch' command.
4905
4906 2010-06-11  Stan Shebs  <stan@codesourcery.com>
4907
4908         * gdb.texinfo (Observer Mode): New section.
4909         (General Query Packets): Document QAllow.
4910
4911 2010-06-04  Doug Evans  <dje@google.com>
4912
4913         * gdb.texinfo (Python API): New node `Disabling Pretty-Printers'.
4914
4915 2010-06-03  Doug Evans  <dje@google.com>
4916
4917         * gdbint.texinfo (Coding): Add subsection on command names.
4918
4919 2010-06-02  Tom Tromey  <tromey@redhat.com>
4920
4921         * gdb.texinfo (Maintenance Commands): Document maint set dwarf2
4922         always-disassemble.
4923
4924 2010-06-01  Pedro Alves  <pedro@codesourcery.com>
4925
4926         * gdb.texinfo (Set Tracepoints): Mention tracepoints support in
4927         gdbserver, and add cross reference.
4928         (Tracepoints support in gdbserver): New subsection.
4929
4930 2010-05-26  Pedro Alves  <pedro@codesourcery.com>
4931
4932         * gdb.texinfo (General Query Packets) <qSupported>: Describe the
4933         `qRelocInsn' feature.
4934         (Relocate instruction reply packet): New subsection
4935         of `Tracepoint Packets'.
4936         (Tracepoint Packets): Mention that packets QTDP and QTStart
4937         support the qRelocInsn request, and add cross reference to new
4938         subsection.
4939
4940 2010-05-25  Doug Evans  <dje@google.com>
4941
4942         * gdb.texinfo (Exception Handling): Document gdb.GdbError.
4943         (Commands In Python): Document gdb.string_to_argv.
4944
4945 2010-05-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
4946
4947         * gdbint.texinfo (Host Definition): Remove items NORETURN and
4948         ATTR_NORETURN.
4949
4950 2010-04-29  Phil Muldoon  <pmuldoon@redhat.com>
4951             Tom Tromey  <tromey@redhat.com>
4952             Thiago Jung Bauermann  <bauerman@br.ibm.com>
4953
4954         * gdb.texinfo (Parameters In Python): New Node.
4955
4956 2010-04-29  Mihail Zenkov  <mihail.zenkov@gmail.com>
4957
4958         * gdb.texinfo: (Summary) Add mention about D language support.
4959         (Filenames): Add D suffixes.
4960         (D): New node.
4961
4962 2010-04-26  Pierre Muller  <muller@ics.u-strasbg.fr>
4963
4964         * gdbint.texinfo (CANNOT_STEP_HW_WATCHPOINTS): Remove explanation
4965         of macro deleted from GDB code.
4966
4967 2010-04-24  Pedro Alves  <pedro@codesourcery.com>
4968
4969         * gdb.texinfo (Commands to specify files): Describe what how GDB
4970         looks up DOS-based filesystem paths on the system root.  Document
4971         the new `set/show target-file-system-kind' commands.
4972
4973 2010-04-23  Doug Evans  <dje@google.com>
4974
4975         * gdb.texinfo (Python): Move Auto-loading section here ...
4976         (Python API): from here.
4977         (Auto-loading): Add docs for .debug_gdb_scripts auto-loaded scripts.
4978         (Maintenance Commands): Add docs for "maint print section-scripts".
4979
4980 2010-04-20  Chris Moller  <cmoller@redhat.com>
4981
4982         * gdb.texinfo (Setting Breakpoints): Added description of
4983         filename-qualified rbreak.
4984         * refcard.tex (Breakpoints and Watchpoints): Added brief
4985         description of filename-qualified rbreak.
4986
4987 2010-04-22  Jan Kratochvil  <jan.kratochvil@redhat.com>
4988
4989         * gdb.texinfo (Data): New @menu reference to Pretty Printing.
4990         (Python API): Change the reference to Pretty Printing API.
4991         (Pretty Printing): Move the user part under the Data node.  Reformat
4992         the sample output to 72 columns.  Create a new reference to Pretty
4993         Printing API.  Rename the API part ...
4994         (Pretty Printing API): To a new node name.
4995         (Selecting Pretty-Printers, Progspaces In Python, Objfiles In Python)
4996         (GDB/MI Variable Objects): Change references to Pretty Printing API.
4997
4998 2010-04-21  Stan Shebs  <stan@codesourcery.com>
4999
5000         * gdb.texinfo (Tracepoint Actions): Mention synonymy of actions
5001         and commands.
5002         (Listing Tracepoints): Update to reflect current behavior.
5003
5004 2010-04-22  Pierre Muller  <muller@ics.u-strasbg.fr>
5005
5006         * gdb.texinfo (Examining memory): Update for change in string
5007         display with explicit size.
5008
5009 2010-04-19  Pedro Alves  <pedro@codesourcery.com>
5010
5011         PR breakpoints/8554.
5012
5013         * gdb.texinfo (Save Breakpoints): New node.
5014         (save-tracepoints): Rename to ...
5015         (save tracepoints): ... this.  Mention that `save-tracepoints' is
5016         a deprecated alias to `save tracepoints'.
5017
5018 2010-04-16  Pierre Muller  <muller@ics.u-strasbg.fr>
5019
5020         * gdb.texinfo ($_tlb): Document new automatic convinience variable.
5021         (info w32 thread-information-block): Document new command.
5022         (qGetTIBAddress): Document new gdbserver query.
5023         (maint set/show show-all-tib): Document new command.
5024
5025 2010-04-15  Doug Evans  <dje@google.com>
5026
5027         * gdb.texinfo (Python API): Add progspaces section.
5028         (Selecting Pretty-Printers): Progspace pretty-printers are
5029         searched too.
5030         (Progspaces In Python): New section.
5031
5032         * gdb.texinfo (Command Files): Add docs for new "source -s" option.
5033
5034 2010-04-14  Phil Muldoon  <pmuldoon@redhat.com>
5035
5036         * gdb.texinfo (Pretty Printing): Document behaviour when to_string
5037         returns None.
5038
5039 2010-04-09  Stan Shebs  <stan@codesourcery.com>
5040
5041         * gdb.texinfo (gdb/mi Tracepoint Commands) <-trace-status>:
5042         Describe the `frames-created' field, tweak grammar.
5043
5044 2010-04-09  Pedro Alves  <pedro@codesourcery.com>
5045
5046         * gdb.texinfo (gdb/mi Tracepoint Commands) <-trace-status>:
5047         Describe the `circular' and `disconnected' fields.
5048
5049 2010-04-09  H.J. Lu  <hongjiu.lu@intel.com>
5050
5051         * gdb.texinfo (maint print registers): Mention unavailable and
5052         invisible registers.
5053
5054 2010-04-09  Phil Muldoon  <pmuldoon@redhat.com>
5055             Thiago Jung Bauermann  <bauerman@br.ibm.com>
5056             Tom Tromey  <tromey@redhat.com>
5057
5058         * gdb.texinfo (Breakpoints In Python): New Node.
5059
5060 2010-04-08  Stan Shebs  <stan@codesourcery.com>
5061
5062         * gdb.texinfo (Tracepoint Packets): Describe disconn and circular
5063         trace status fields.
5064
5065 2010-04-08  H.J. Lu  <hongjiu.lu@intel.com>
5066
5067         * gdb.texinfo (i386 Features): Make org.gnu.gdb.i386.avx
5068         optional.  Make org.gnu.gdb.i386.avx requires
5069         org.gnu.gdb.i386.avx.
5070
5071 2010-04-08  Doug Evans  <dje@google.com>
5072
5073         * gdb.texinfo (Command Files): Document that gdb skips $cdir in
5074         search path, and document that gdb only scans the search path if
5075         the script's path doesn't specify a directory.
5076
5077 2010-04-05  Doug Evans  <dje@google.com>
5078
5079         * gdb.texinfo (maint show python auto-load): Fix typo.
5080
5081 2010-04-04  Stan Shebs  <stan@codesourcery.com>
5082
5083         * gdb.texinfo (Setting Breakpoints): "info watch" no longer a synonym.
5084         (Setting Watchpoints): Update description of "info watch".
5085         (Disabling Breakpoints): Only "info break" lists all.
5086
5087         * gdb.texinfo (Tracepoint Restrictions): Document PC inference.
5088         (tdump): Explain how tdump works.
5089
5090 2010-04-01  Pedro Alves  <pedro@codesourcery.com>
5091
5092         * gdb.texinfo (Break Commands): Clarify `commands' changes, and
5093         add cross reference.
5094
5095 2010-03-31  Pedro Alves  <pedro@codesourcery.com>
5096
5097         * gdb.texinfo (TUI Commands): Mention that in some cases, these
5098         commands error out.
5099
5100 2010-03-30  H.J. Lu  <hongjiu.lu@intel.com>
5101
5102         * gdb.texinfo (i386 Features): Add org.gnu.gdb.i386.avx.
5103
5104 2010-03-30  H.J. Lu  <hongjiu.lu@intel.com>
5105
5106         * gdb.texinfo (General Query Packets): Add xmlRegisters.
5107
5108 2010-03-29  Stan Shebs  <stan@codesourcery.com>
5109             Nathan Sidwell  <nathan@codesourcery.com>
5110
5111         * gdb.texinfo (GDB/MI Tracepoint Commands): Add notes about the
5112         GDBN equivalent.
5113         (Set Tracepoints): Remove mention that conditional tracepoints
5114         don't exist.
5115         (Tracepoint Actions): Clarify when while-stepping collection
5116         happens, note that while-stepping does not automatically collect
5117         $pc.
5118
5119 2010-03-29  Stan Shebs  <stan@codesourcery.com>
5120
5121         * gdb.texinfo (Tracepoint Packets): Describe QTDPsrc.
5122         (General Query Packets): Describe TracepointSource.
5123
5124 2010-03-27  Matt Rice  <ratmice@gmail.com>
5125
5126         * gdb.texinfo (ARM): Document arguments to "target sim".
5127         (Set Catchpoints): Use @dots{} instead of @r{...}.
5128
5129 2010-03-26  Pedro Alves  <pedro@codesourcery.com>
5130
5131         * gdb.texinfo (Tracepoint Packets): Remove mention that
5132         terror:string may be plain text, and drop mention of X prefix.
5133
5134 2010-03-26  Vladimir Prus  <vladimir@codesourcery.com>
5135
5136         * gdb.texinfo (GDB/MI Tracepoint Commands): Add comma after @xref.
5137
5138 2010-03-24  Stan Shebs  <stan@codesourcery.com>
5139
5140         * gdb.texinfo (Tracepoint Packets): Document trace error status.
5141
5142 2010-03-24  Tom Tromey  <tromey@redhat.com>
5143
5144         PR breakpoints/9352:
5145         * gdb.texinfo (Break Commands): Update.
5146
5147 2010-03-24  Vladimir Prus  <vladimir@codesourcery.com>
5148
5149         * gdb.texinfo (GDB/MI Tracepoint Commands): Document MI tracepoint
5150         commands.
5151
5152 2010-03-16  Stan Shebs  <stan@codesourcery.com>
5153
5154         * gdb.texinfo (Starting and Stopping Trace Experiments): Describe
5155         circular-trace-buffer.
5156         (Tracepoint Packets): Describe QTBuffer, and details of the
5157         qTStatus reply.
5158
5159 2010-03-12  Stan Shebs  <stan@codesourcery.com>
5160             Nathan Sidwell  <nathan@codesourcery.com>
5161
5162         * gdb.texinfo (Tracepoint Actions): Clarify that while-stepping is
5163         doing instruction stepping.
5164         (Tracepoint Restrictions): New node.
5165
5166 2010-03-10  Tom Tromey  <tromey@redhat.com>
5167
5168         * gdbint.texinfo (Symbol Handling): Update.
5169
5170 2010-03-08  Tom Tromey  <tromey@redhat.com>
5171
5172         PR cli/9591:
5173         * gdb.texinfo (Mode Options): Mention lack of pagination and
5174         confirmation with --batch.
5175         (Screen Size): Mention --batch.
5176         (Messages/Warnings): Likewise.
5177
5178 2010-03-05  Tom Tromey  <tromey@redhat.com>
5179
5180         * gdb.texinfo (Basic Python): Document target_charset and
5181         target_wide_charset.
5182
5183 2010-03-05  Tom Tromey  <tromey@redhat.com>
5184
5185         * gdb.texinfo (Data): Link to pretty-printing.
5186         (Output Formats): Likewise.  Correct text.
5187
5188 2010-03-01  Daniel Jacobowitz  <dan@codesourcery.com>
5189
5190         * gdb.texinfo (Types): Describe <struct> and <flags>.
5191
5192 2010-02-28  Phil Muldoon  <pmuldoon@redhat.com>
5193
5194         * gdb.texinfo (Frames In Python): Add block parameter and
5195         description to read_var text.
5196
5197 2010-02-26  Phil Muldoon  <pmuldoon@redhat.com>
5198             Tom Tromey  <tromey@redhat.com>
5199
5200         * gdb.texinfo (Types In Python): Describe block argument in
5201         template_argument and gdb.lookup_type.
5202
5203 2010-02-24  Tom Tromey  <tromey@redhat.com>
5204
5205         * gdb.texinfo (Cygwin Native): Fix typo.
5206
5207 2010-02-24  Phil Muldoon  <pmuldoon@redhat.com>
5208
5209         * gdb.texinfo (Frames In Python): Add block, find_sal, function
5210         and select method descriptions.
5211         (Python API): Add Blocks In Python, Symbols in Python and Symbol
5212         Tables in Python to menu.
5213         (Blocks In Python): New node.
5214         (Symbols In Python): New node.
5215         (Symbol Tables in Python): New node.
5216
5217 2010-02-24  Vladimir Prus  <vladimir@codesourcery.com>
5218
5219         Multiexec MI
5220
5221         gdb/
5222         * breakpoint.c (clear_syscall_counts): Take struct inferior*.
5223
5224         gdb/doc/
5225         * gdb.texinfo (GDB/MI Command Syntax): Document notification
5226         changes.
5227         (GDB/MI Program Execution): Document current behaviour of
5228         --all and --thread-group.
5229         (GDB/MI Miscellaneous Commands): Document -add-inferior and
5230         -remove-inferior.
5231         * observer.texi (inferior_added, inferior_removed): New
5232         observers.
5233
5234 2010-02-19  Tom Tromey  <tromey@redhat.com>
5235
5236         * gdbint.texinfo (Getting Started): Fix @node.
5237         (Debugging GDB): Likewise.
5238
5239 2010-02-13  Joel Brobecker  <brobecker@adacore.com>
5240
5241         * gdbint.texinfo (Testsuite): New section "Testsuite Configuration",
5242         documenting the gdb_test_timeout variable.
5243
5244 2010-02-12  Jakob Engblom  <jakob@virtutech.com>
5245
5246         * gdb.texinfo (MI commands): Added documentation of --reverse
5247         option to a set of MI commands. Restructured documentation of MI
5248         commands --exec-continue to reflect the complexity of reverse
5249         execution.
5250
5251 2010-02-12  Pedro Alves  <pedro@codesourcery.com>
5252
5253         * gdb.texinfo (Using the Collected Data): Specify that the address
5254         range of `tfind outsize' is exclusive, and that the address range
5255         of `tfind range' is inclusive.
5256         (Tracepoint Packets): Specify that the address range of
5257         `QTFrame:range' is inclusive, and that the address range of
5258         `QTFrame:outside' is exclusive
5259
5260 2010-02-12  Vladimir Prus  <vladimir@codesourcery.com>
5261
5262         * gdb.texinfo (GDB/MI Result Records): Clarify ^running.
5263
5264 2010-02-10  Tom Tromey  <tromey@redhat.com>
5265
5266         * gdb.texinfo (Debugging Output): Document set debug parser and
5267         show debug parser.
5268
5269 2010-02-09  H.J. Lu  <hongjiu.lu@intel.com>
5270
5271         * gdb.texinfo (Predefined Target Types): Add i387_ext,
5272         i386_eflags and i386_mxcsr.
5273
5274 2010-02-08  H.J. Lu  <hongjiu.lu@intel.com>
5275
5276         * gdb.texinfo: Document i386 target features.
5277
5278 2010-02-05  Doug Evans  <dje@google.com>
5279
5280         * gdbint.texinfo (Testsuite): Add a new section to document the
5281         various DejaGnu variables that may be overridden.
5282         Document INTERNAL_GDBFLAGS.
5283
5284 2010-02-04  Tom Tromey  <tromey@redhat.com>
5285
5286         PR cli/8830:
5287         * gdb.texinfo (Files): -readnow comes before the filename for file
5288         and symbol-file.
5289
5290 2010-02-01  Daniel Jacobowitz  <dan@codesourcery.com>
5291
5292         * gdb.texinfo (Architecture-Specific Protocol Details): New section.
5293         Document ARM breakpoint types.
5294         (Register Packet Format): Move into the new section.
5295         (Packets): Describe the KIND argument for Z0, z0, Z1, and z1 packets.
5296
5297 2010-01-21  Joel Brobecker  <brobecker@adacore.com>
5298
5299         * gdb.texinfo (File Options): Adjust the documentation of this
5300         switch to refer to the "source" command rather than partially
5301         duplicating some of the relevant information.
5302         (Extending GDB): Introduce and document the set/show script-extension
5303         setting.
5304         (Command Files): Add note explaining that the "source" command
5305         is also used to evalute scripts written in other languages.
5306         Remove the short slightly incorrect reference to sourcing Python
5307         scripts.
5308         (Python Commands): Document how to execute a Python script from GDB.
5309
5310 2010-01-19  Joel Brobecker  <brobecker@adacore.com>
5311
5312         * gdb.texinfo (Command Files): Fix typo.
5313
5314 2010-01-18  Tom Tromey  <tromey@redhat.com>
5315
5316         * gdb.texinfo (File Options): Document -x on .py files.
5317         (Command Files): Document handling of Python scripts.
5318
5319 2010-01-18  Jie Zhang  <jie.zhang@analog.com>
5320
5321         * Makefile.in (ANNOTATE_DOC_BUILD_INCLUDES): Add GDBvn.texi.
5322
5323 2010-01-15  Stan Shebs  <stan@codesourcery.com>
5324
5325         * gdb.texinfo (Trace Files): New section.
5326         (Tracepoint Packets): Document QTSave and qTBuffer.
5327         (Trace File Format): New appendix.
5328
5329 2010-01-13  Phil Muldoon  <pmuldoon@redhat.com>
5330
5331         * gdb.texinfo (Values From Inferior): Document lazy_string value
5332         method.
5333         (Python API): Add Lazy strings menu item.
5334         (Lazy Strings In Python): New node.
5335
5336 2010-01-13  Vladimir Prus  <vladimir@codesourcery.com>
5337
5338         * gdb.texinfo (GDB/MI Thread Information): New.
5339         (GDB/MI Async Records): Document the core field in *stopped.
5340         (GDB/MI Miscellaneous Commands): Expand -list-thread-groups
5341         documentation
5342         (Process list): Document that osdata document may contain
5343         threads.
5344         (Remote Serial Protocol): Document qXfer:threads.
5345
5346 2010-01-06  Stan Shebs  <stan@codesourcery.com>
5347
5348         * gdb.texinfo (Starting and Stopping Trace Experiments): Document
5349         disconnected tracing.
5350         (Tracepoint Packets): Document new protocol.
5351
5352 2010-01-05  Stan Shebs  <stan@codesourcery.com>
5353
5354         * gdb.texinfo (Create and Delete Tracepoints): Describe fast
5355         tracepoints.
5356         (Tracepoint Packets): Describe remote protocol for fast
5357         tracepoints.
5358
5359 2010-01-01  Joel Brobecker  <brobecker@adacore.com>
5360
5361         Update the "Start of New Year Procedure".
5362         * gdbint.texinfo: Add the list of files that need to be updated
5363         manually.  Minor reformatting.
5364
5365 2010-01-01  Joel Brobecker  <brobecker@adacore.com>
5366
5367         * refcard.tex: Update copyright year in header and text.
5368
5369 2010-01-01  Joel Brobecker  <brobecker@adacore.com>
5370
5371         * agentexpr.texi: Add 2010 to the list of copyright years.
5372         * annotate.texinfo: Likewise.
5373         * gdb.texinfo: Likewise.
5374         * gdbint.texinfo: Likewise.
5375         * observer.texi: Likewise.
5376         * stabs.texinfo: Likewise.
5377
5378 2009-12-31  Stan Shebs  <stan@codesourcery.com>
5379
5380         * gdb.texinfo (Tracepoint Actions): Describe teval.
5381
5382 2009-12-29  Stan Shebs  <stan@codesourcery.com>
5383
5384         * gdb.texinfo (Tracepoint Actions): Describe default-collect.
5385
5386 2009-12-28  Stan Shebs  <stan@codesourcery.com>
5387
5388         * gdb.texinfo (Trace State Variables): New section.
5389         (Tracepoint Packets): Describe trace state variable packets.
5390         * agentexpr.texi (Bytecode Descriptions): Describe trace state
5391         variable bytecodes.
5392
5393 2009-12-28  Daniel Jacobowitz  <dan@codesourcery.com>
5394
5395         * gdb.texinfo (Symbols): "info variables" prints definitions, not
5396         declarations.
5397
5398 2009-12-21  Vladimir Prus  <vladimir@codesourcery.com>
5399
5400         * gdb.texinfo (GDB/MI Miscellaneous Commands): Clarify that
5401         -gdb-exit behaviour.
5402
5403 2009-12-20  Joel Brobecker  <brobecker@adacore.com>
5404
5405         * gpl.texi: Update to version 3 of the GPL.
5406
5407 2009-12-20  Joel Brobecker  <brobecker@adacore.com>
5408
5409         * Makefile.in: Update copyright header.
5410         * observer.texi: Fix the copyright header of the generated files.
5411
5412 2009-12-08  Phil Muldoon  <pmuldoon@redhat.com>
5413
5414         * gdb.texinfo (Types In Python): Describe range function.
5415
5416 2009-12-03  Richard Ward  <richard.j.ward1@googlemail.com>
5417
5418         * gdb.texinfo (Types In Python): Describe "is_base_class".
5419
5420 2009-12-03  Tom Tromey  <tromey@redhat.com>
5421
5422         * gdb.texinfo (Basic Python): Document gdb.parse_and_eval.
5423
5424 2009-12-02  Paul Pluzhnikov  <ppluzhnikov@google.com>
5425
5426         * observer.texi: New memory_changed observer.
5427
5428 2009-12-01  Tom Tromey  <tromey@redhat.com>
5429
5430         * gdb.texinfo (Reverse Execution): Fix typo.
5431
5432 2009-11-24  Daniel Jacobowitz  <dan@codesourcery.com>
5433
5434         PR gdb/8704
5435
5436         * gdb.texinfo (Thread-Specific Breakpoints): Thread specifiers
5437         are allowed after the breakpoint condition.
5438
5439 2009-11-23  Tom Tromey  <tromey@redhat.com>
5440
5441         PR python/10782:
5442         * gdb.texinfo (Types In Python): Document Type.pointer.
5443
5444 2009-11-23  Paul Pluzhnikov  <ppluzhnikov@google.com>
5445
5446         * gdb.texinfo (Machine Code): Adjust.
5447
5448 2009-11-11  Pedro Alves  <pedro@codesourcery.com>
5449
5450         * agentexpr.texi (Tracing On Symmetrix): Delete section.
5451         (Using Agent Expressions): Delete cross reference.
5452
5453 2009-11-07  Joel Brobecker  <brobecker@adacore.com>
5454
5455         * gdbint.texinfo, stabs.texinfo: Move the @setchapternewpage
5456         and @settitle directives up to help makeinfo find them.
5457
5458 2009-11-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
5459
5460         * gdb.texinfo (set debug-file-directory, show debug-file-directory)
5461         (Auto-loading): Use plural and note one can use multiple components now.
5462
5463 2009-11-01  Vladimir Prus  <vladimir@codesourcery.com>
5464
5465         * gdb.texinfo (GDB/MI Stack Manipulation): Make
5466         -stack-list-arguments have the same documentation for parameter
5467         as -stack-list-locals. Add comas.
5468
5469 2009-10-27  Tom Tromey <tromey@redhat.com>
5470             Eli Zaretskii <eliz@gnu.org>
5471
5472         PR python/10781
5473
5474         * gdb.texinfo (Values From Inferior): Document cast method.
5475
5476 2009-10-22  Paul Pluzhnikov  <ppluzhnikov@google.com>
5477
5478         * gdb.texinfo (Machine Code): Mention function name in disasssembly
5479         and adjust example.
5480
5481 2009-10-22  Michael Snyder  <msnyder@vmware.com>
5482
5483         * gdb.texinfo (Process Record and Replay): Document new form of
5484         info record command.  Also document the new save and restore
5485         commands.
5486
5487 2009-10-21  Paul Pluzhnikov  <ppluzhnikov@google.com>
5488
5489         * gdb.texinfo (Machine Code): Mention current pc marker.
5490         (Memory): Likewise.
5491
5492 2009-10-19  Pedro Alves  <pedro@codesourcery.com>
5493             Stan Shebs  <stan@codesourcery.com>
5494
5495         * observer.texi (new_inferior): Rename to...
5496         (inferior_appeared): ... this.
5497
5498         * gdb.texinfo (Inferiors): Rename node to ...
5499         (Inferiors and Programs): ... this.  Mention running multiple
5500         programs in the same debug session.
5501         <info inferiors>: Mention the new 'Executable' column if "info
5502         inferiors".  Update examples.  Document the "add-inferior",
5503         "clone-inferior", "remove-inferior" and "maint info
5504         program-spaces" commands.
5505         (Process): Rename node to...
5506         (Forks): ... this.  Document "set|show follow-exec-mode".
5507
5508 2009-10-11  Michael Snyder  <msnyder@vmware.com>
5509
5510         * gdb.texinfo (ReverseStep): Show default as "unsupported".
5511         (ReverseContinue): Ditto.
5512
5513 2009-10-08  Paul Pluzhnikov  <ppluzhnikov@google.com>
5514
5515         * gdb.texinfo (Server): Document libthread-db-search-path.
5516
5517 2009-10-08  Jan Kratochvil  <jan.kratochvil@redhat.com>
5518
5519         * gdbint.texinfo (i386_stopped_by_hwbp): Remove.
5520
5521 2009-10-06  Michael Eager  <eager@eagercon.com>
5522
5523         * gdb.texinfo (Contributors): Add self for Xilinx MicroBlaze.
5524         (Embedded Processors): Add MicroBlaze.
5525         (MicroBlaze): New.  Describe Xilinx MicroBlaze
5526
5527 2009-10-04  Pedro Alves  <pedro@codesourcery.com>
5528
5529         * gdb.texinfo (Remote Protocol): Don't mention vCont;T.
5530
5531 2009-09-26  Pierre Muller  <muller@ics.u-strasbg.fr>
5532
5533         * gdb.texinfo (Cygwin Native): Mention support for Ctrl-BREAK.
5534
5535 2009-09-23  Joel Brobecker  <brobecker@adacore.com>
5536
5537         * observer.texi (solib_unloaded): Document explicitly the fact that
5538         this observer is called before the associated symbols are unloaded.
5539
5540 2009-09-19  Vladimir Prus  <vladimir@codesourcery.com>
5541
5542         * gdb.texinfo (GDB/MI Stack Manipulation): Document
5543         -stack-list-variables.
5544
5545 2009-09-18  Tom Tromey  <tromey@redhat.com>
5546
5547         * gdb.texinfo (GDB/MI Variable Objects): -enable-pretty-printing
5548         is experimental.
5549
5550 2009-09-17  Paul Pluzhnikov  <ppluzhnikov@google.com>
5551
5552         * gdb.texinfo (convenince variables): Mention
5553         $_siginfo could be empty.
5554
5555 2009-09-15  Tom Tromey  <tromey@redhat.com>
5556
5557         * gdb.texinfo (GDB/MI Variable Objects): Document
5558         -enable-pretty-printing, -var-set-update-range, dynamic varobjs.
5559         Expand -var-update documentation.
5560
5561 2009-09-14  Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com>
5562
5563         * gdb.texinfo (Set Catchpoints): Documentation about the catch syscall
5564         feature.
5565
5566 2009-09-13  Daniel Jacobowitz  <dan@codesourcery.com>
5567
5568         * gdbint.texinfo (Unwinding the Frame ID): Reference outer_frame_id.
5569
5570 2009-09-10  Michael Snyder  <msnyder@vmware.com>
5571
5572         * gdb.texinfo (qSupported): Mention new ReverseContinue and
5573         ReverseStep replies to the qSupported query.
5574
5575 2009-09-10  Joel Brobecker  <brobecker@adacore.com>
5576
5577         Add documentation for set/show interactive-mode.
5578         * gdb.texinfo (Other Misc Settings): New node.
5579
5580 2009-09-01  Doug Evans  <dje@google.com>
5581
5582         * gdb.texinfo (Caching Data of Remote Targets): Add note on
5583         non-stop mode's affect on remote caching.
5584
5585 2009-08-31  Jacob Potter  <jdpotter@google.com>
5586             Doug Evans  <dje@google.com>
5587
5588         * gdb.texinfo (Caching Data of Remote Targets): Update text.
5589         Mark `set/show remotecache' options as obsolete.
5590         Document new `set/show stack-cache' option.
5591         Update text for `info dcache'.
5592
5593 2009-08-27  Doug Evans  <dje@google.com>
5594
5595         * gdb.texinfo (Symbols): Delete `set print symbol-loading'.
5596         (Files): Add note on new optional regex arg to `info sharedlibrary'.
5597
5598 2009-08-26  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
5599
5600         * gdbint.texinfo (Releasing GDB): Fix confusing sentence
5601         about autoconf.
5602
5603 2009-08-25  Pedro Alves  <pedro@codesourcery.com>
5604
5605         * gdb.texinfo (Debugging Multiple Inferiors): Add "info inferiors"
5606         small example, and describe its columns.  Replace "inferior-id" by
5607         "infno" throughout.
5608
5609 2009-08-22  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>
5610
5611         * gdbint.texinfo (Releasing GDB): Point to
5612         README-maintainer-mode file for required autoconf version.
5613         * configure.ac: Do not substitute datarootdir, htmldir,
5614         pdfdir, docdir.  Do not process --with-datarootdir,
5615         --with-htmldir, --with-pdfdir, --with-docdir.
5616         * configure: Regenerate.
5617
5618         * configure: Regenerate.
5619
5620 2009-08-20  Reid Kleckner  <reid@kleckner.net>
5621
5622         * gdb.texinfo: Add chapter on JIT interface.
5623
5624 2009-08-07  Nick Roberts  <nickrob@snap.net.nz>
5625
5626         * gdb.texinfo (Server Prefix): Explain that server prefix suppresses
5627         confirmation request.
5628
5629 2009-08-05  Jeremy Bennett  <jeremy.bennett@embecosm.com>
5630
5631         * gdb.texinfo (Separate Debug Files, Remote Protocol): Clarified
5632         CRC definitions.
5633
5634 2009-08-03  Vladimir Prus  <vladimir@codesourcery.com>
5635
5636         * gdb.texinfo (GDB/MI Breakpoint Commands): Document
5637         -break-commands.
5638
5639 2009-07-31  Ulrich Weigand  <uweigand@de.ibm.com>
5640
5641         * gdb.texinfo (Cell Broadband Engine SPU architecture): Document the
5642         "set spu auto-flush-cache" and "show spu auto-flush-cache" commands.
5643
5644 2009-07-31  Ulrich Weigand  <uweigand@de.ibm.com>
5645
5646         * gdb.texinfo (Cell Broadband Engine SPU architecture): Document the
5647         "set spu stop-on-load" and "show spu stop-on-load" commands.
5648
5649 2009-07-31  Ulrich Weigand  <uweigand@de.ibm.com>
5650
5651         * gdb.texinfo (Target Descriptions): Document <compatible> element.
5652
5653 2009-07-28  Daniel Jacobowitz  <dan@codesourcery.com>
5654
5655         * gdb.texinfo (ARM Features): Document org.gnu.gdb.arm.vfp and
5656         org.gnu.gdb.arm.neon.
5657
5658 2009-07-20  Pedro Alves  <pedro@codesourcery.com>
5659
5660         * gdb.texinfo (Target Description Format): Mention the new <osabi>
5661         optional element.
5662         (subsection OS ABI): New subsection.
5663
5664 2009-07-14  Stan Shebs  <stan@codesourcery.com>
5665
5666         * gdb.texinfo (Tracepoint Conditions): New section.
5667         (General Query Packets): Describe ConditionalTracepoints.
5668         (Tracepoint Packets): Describe condition field.
5669         (Maintenance Commands): Describe maint agent-eval.
5670         * agentexpr.texi (Using Agent Expressions): Mention eval usage.
5671
5672 2009-07-11  Hui Zhu  <teawater@gmail.com>
5673
5674         * gdb.texinfo (disassemble): Add a new modifier /r
5675         to "disassemble" command to make it print the raw instructions
5676         in hex as well as in symbolic form.
5677
5678 2009-07-09  Tom Tromey  <tromey@redhat.com>
5679
5680         * gdbint.texinfo (Testsuite): Document parallel make check.
5681
5682 2009-07-09  Tom Tromey  <tromey@redhat.com>
5683
5684         * gdbint.texinfo (Testsuite): Document test transcripts.
5685
5686 2009-07-10  Phil Muldoon  <pmuldoon@redhat.com>
5687
5688         * gdb.texinfo (Values From Inferior): Add length parameter
5689         description.
5690
5691 2009-07-04  Chris Genly  <chris@genly.us>
5692
5693         * gdb.texinfo (GDB/MI Variable Objects): Document child definition
5694         in -var-list-children.  Fix example according to what the code
5695         does.
5696
5697 2009-07-02  Pedro Alves  <pedro@codesourcery.com>
5698
5699         * gdb.texinfo (Debugging multiple inferiors): Document the
5700         "inferior", "detach inferior" and "kill inferior" commands.
5701         (Debugging Programs with Multiple Processes): Adjust to mention
5702         generic "inferior" commands.  Delete mention of "detach fork" and
5703         "delete fork".  Cross reference to "Debugging multiple inferiors"
5704         section.
5705
5706 2009-07-02  Ulrich Weigand  <uweigand@de.ibm.com>
5707
5708         * gdbint.texinfo (Item Output Functions): Update signature
5709         for ui_out_field_core_addr.
5710
5711 2009-07-02  Ulrich Weigand  <uweigand@de.ibm.com>
5712
5713         * gdbint.texinfo (Examples of Use of @code{ui_out} functions):
5714         Update example code extrated from breakpoint.c.
5715
5716 2009-06-28  Paul Pluzhnikov  <ppluzhnikov@google.com>
5717
5718         * gdb.texinfo (GDB/MI Program Context): @ignore unimplemented
5719         MI commands.
5720         (GDB/MI Symbol Query): Likewise.
5721         (GDB/MI File Commands): Likewise.
5722         (GDB/MI File Transfer Commands): Likewise.
5723         (GDB/MI Target Manipulation): Likewise.
5724         (GDB/MI Miscellaneous Commands): Likewise.
5725
5726 2009-06-27  Daniel Jacobowitz  <dan@codesourcery.com>
5727
5728         * gdb.texinfo (Debugging Optimized Code): New chapter.
5729         (Compiling for Debugging): Reference it.  Move some
5730         text to the new section.
5731
5732 2009-06-15  Phil Muldoon  <pmuldoon@redhat.com>
5733
5734         * doc/gdb.texinfo (Calling): Document
5735         set-unwind-on-terminating-exception usage.
5736
5737 2009-06-11  Pedro Alves  <pedro@codesourcery.com>
5738
5739         * gdb.texinfo (All-Stop): Document new 'set schedule-multiple'
5740         command.
5741
5742 2009-06-07  Pedro Alves  <pedro@codesourcery.com>
5743
5744         * gdbint.texinfo (TARGET_HAS_HARDWARE_WATCHPOINTS): Delete all
5745         references.
5746
5747 2009-06-04  Ulrich Weigand  <uweigand@de.ibm.com>
5748
5749         * gdbint.texinfo: Rename formal parameters to gdbarch function
5750         protoypes from "current_gdbarch" to "gdbarch".
5751
5752 2009-05-28  Tom Tromey  <tromey@redhat.com>
5753
5754         * gdb.texinfo (Basic Python): Change get_parameter to parameter.
5755
5756 2009-05-27  Tom Tromey  <tromey@redhat.com>
5757
5758         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document "python"
5759         feature.
5760         (GDB/MI Variable Objects): Document -var-set-visualizer.
5761
5762 2009-04-02  Tom Tromey  <tromey@redhat.com>
5763
5764         * gdb.texinfo (GDB/MI Miscellaneous Commands): Document "python"
5765         feature.
5766         (GDB/MI Variable Objects): Document -var-set-visualizer.
5767
5768 2009-05-27  Tom Tromey  <tromey@redhat.com>
5769             Thiago Jung Bauermann  <bauerman@br.ibm.com>
5770             Phil Muldoon  <pmuldoon@redhat.com>
5771
5772         * gdb.texinfo (Objfiles In Python): Reference pretty printing.
5773         (Pretty Printing): New node.
5774         (Selecting Pretty-Printers): Likewise.
5775         (Python API): Update.
5776         (Output Formats): Document /r format.
5777
5778 2009-05-27  Thiago Jung Bauermann  <bauerman@br.ibm.com>
5779             Tom Tromey  <tromey@redhat.com>
5780
5781         * gdb.texinfo (Types In Python): New node.
5782         (Values From Inferior): "type" is now an attribute.
5783         (Python API): Update.
5784
5785 2009-05-27  Tom Tromey  <tromey@redhat.com>
5786             Thiago Jung Bauermann  <bauerman@br.ibm.com>
5787             Phil Muldoon  <pmuldoon@redhat.com>
5788
5789         * gdb.texinfo: Add @syncodeindex for `tp'.
5790         (Python API): Update.
5791         (Auto-loading): New node.
5792         (Objfiles In Python): New node.
5793
5794 2009-05-15  Paul Pluzhnikov  <ppluzhnikov@google.com>
5795
5796         * gdb.texinfo (Threads): Document libthread-db-search-path.
5797
5798 2009-05-15  Nick Roberts  <nickrob@snap.net.nz>
5799
5800         * gdb.texinfo (GDB/MI General Design): Break up into four nodes.
5801
5802 2009-05-12  Pedro Alves  <pedro@codesourcery.com>
5803
5804         * gdb.texinfo: Document 'set/show debug gnu-nat'.  Replace 'maint
5805         show-debug-regs' docs by 'maint set show-debug-regs' and 'maint
5806         show show-debug-regs' docs.
5807
5808 2009-05-08  Eli Zaretskii  <eliz@gnu.org>
5809
5810         * gdb.texinfo (Process Record and Replay): Add description of
5811         reverse execution.
5812
5813 2009-05-07  Joel Brobecker  <brobecker@adacore.com>
5814
5815         * gdbint.texinfo (Adding support for debugging core files): New node.
5816         (Native Debugging): Remove the ``Native core file Support'' section.
5817
5818 2009-05-01  Eli Zaretskii  <eliz@gnu.org>
5819
5820         * gdb.texinfo (Process Record and Replay): Improve and clarify.
5821         Add index entries.
5822
5823 2009-04-30  Hui Zhu  <teawater@gmail.com>
5824             Michael Snyder  <msnyder@vmware.com>
5825
5826         * gdb.texinfo: (Process Record and Replay): Add documentation for
5827         process record and replay.
5828
5829 2009-04-29  Jan Kratochvil  <jan.kratochvil@redhat.com>
5830
5831         * gdb.texinfo (Macros): Note command-line for `info macro'.  Append
5832         a new part on command-line defined macros.
5833
5834 2009-04-25  Eli Zaretskii  <eliz@gnu.org>
5835
5836         * gdb.texinfo (Machine Code) <disassemble-next-line>: Improve and
5837         clarify the wording.
5838
5839 2009-04-23  Tom Tromey  <tromey@redhat.com>
5840
5841         * gdb.texinfo (Data Files): New node.
5842         (GDB Files): Update menu.
5843
5844 2009-04-23  Joel Brobecker  <brobecker@adacore.com>
5845
5846         * gdbint.texinfo (Defining Other Architecture Features): Remove
5847         entry for PROCESS_LINENUMBER_HOOK.
5848
5849 2009-04-22  Vladimir Prus  <vladimir@codesourcery.com>
5850
5851         * gdb.texinfo (GDB/MI Program Execution): Document -exec-jump.
5852
5853 2009-04-22  Hui Zhu  <teawater@gmail.com>
5854
5855         * gdb.texinfo (disassemble-next-line): Set the default of
5856         disassemble-next-line to off.
5857
5858 2009-04-21  Joseph Myers  <joseph@codesourcery.com>
5859
5860         * configure.ac (--with-datarootdir, --with-docdir, --with-pdfdir,
5861         --with-htmldir): New.
5862         * configure: Regenerate.
5863         * Makefile.in (datarootdir, docdir): Define.
5864         (gdb.dvi, gdb.pdf): Use same -I options as for building gdb.info
5865         instead of $(SET_TEXINPUTS).
5866         (gdbint.dvi, gdbint.pdf): Use same -I options as for building
5867         gdbint.info instead of $(SET_TEXINPUTS).
5868         (gdbint/index.html): Use same -I options as for building
5869         gdbint.info.
5870         (stabs.dvi, stabs.pdf): Use same -I options as for building
5871         stabs.info instead of $(SET_TEXINPUTS).
5872         (stabs/index.html): Use same -I options as for building
5873         stabs.info.
5874         (annotate.dvi, annotate.pdf): Use same -I options as for building
5875         annotate.info instead of $(SET_TEXINPUTS).
5876         (annotate/index.html): Use same -I options as for building
5877         annotate.info.
5878
5879 2009-04-21  David Daney  <ddaney@caviumnetworks.com>
5880
5881         * gdb.texinfo (maint show-debug-regs): Remove mention of x86.
5882
5883 2009-04-21  Joseph Myers  <joseph@codesourcery.com>
5884
5885         * gdb.texinfo (Source Path): Document --with-relocated-sources.
5886
5887 2009-04-18  Carlos O'Donell  <carlos@codesourcery.com>
5888             Joseph Myers  <joseph@codesourcery.com>
5889
5890         * Makefile.in (MAKEHTML): Set to makeinfo --html.
5891         (MAKEHTMLFLAGS): Set to empty.
5892         (html__strip_dir): Define.
5893         (HTMLFILES): Define.
5894         (HTMLFILES_INSTALL): Define.
5895         (install-html): Copy new automake rule.
5896         (html): Depend on $(HTMLFILES).
5897         (gdb_toc.html): Rename to gdb/index.html.
5898         (gdbint_toc.html): Rename to gdbint/index.html.
5899         (stabs_toc.html): Rename to stabs/index.html.
5900         (annotate_toc.html): Rename to annotate/index.html.
5901
5902 2009-04-17  Carlos O'Donell  <carlos@codesourcery.com>
5903
5904         * Makefile.in: Set pdfdir and htmldir from configure
5905         substitutions.
5906         * configure.ac: AC_SUBST datarootdir, docdir, htmldir, pdfdir.
5907         * configure: Regenerate.
5908
5909 2009-04-16  Joel Brobecker  <brobecker@adacore.com>
5910
5911         * gdbint.texinfo (Native Debugging): Remove entry for PROC_NAME_FMT.
5912         This macro is no longer used.
5913
5914 2009-04-15  Tom Tromey  <tromey@redhat.com>
5915
5916         * gdb.texinfo (Character Sets): Document default character set.
5917
5918 2009-04-14  Pierre Muller  <muller@ics.u-strasbg.fr>
5919
5920         * gdbint.texinfo: Change server name from sources.redhat.com to
5921         sourceware.org throughout.
5922
5923 2009-04-09  Joel Brobecker  <brobecker@adacore.com>
5924
5925         * gdb.texinfo (Set Breaks): Rewrite a paragraph to avoid a warning
5926         about a missing dot or coma after @xref.
5927
5928 2009-04-02  Joel Brobecker  <brobecker@adacore.com>
5929
5930         * gdb.texinfo (Backtrace): Add a parameter in frame 1 of the first
5931         example, and add a small explanation about it.
5932         (Print Settings): Change the documentation of the "set print
5933         frame-arguments" to reflect the fact that the default is now "scalars".
5934
5935 2009-04-02  Joel Brobecker  <brobecker@adacore.com>
5936
5937         * gdb.texinfo (Print Settings): Add kindex for command "set
5938         print frame-arguments".
5939
5940 2009-03-31  Joel Brobecker  <brobecker@adacore.com>
5941
5942         * gdb.texinfo (Ada Tasks): Add documentation about task-specific
5943         breakpoints.
5944         (Set Breaks): Add reference to thread-specific and task-specific
5945         breakpoints.
5946
5947 2009-03-31  Joel Brobecker  <brobecker@adacore.com>
5948
5949         * gdb.texinfo (Ada Tasks): Remove the documentation about
5950         the "Running" state, as this state has been eliminated.
5951         Now all runnable tasks are shown as "Runnable".
5952
5953 2009-03-30  Stan Shebs  <stan@codesourcery.com>
5954
5955         * gdb.texinfo (Tracepoints): Describe tracepoints as a
5956         special case of breakpoints.
5957         (Enable and Disable Tracepoints): Mention deprecation.
5958         (Listing Tracepoints): Update description and example.
5959
5960 2009-03-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>
5961
5962         * gdb.texinfo (Frames in Python): New node.
5963         (Python API): Update.
5964
5965 2009-03-29  Thiago Jung Bauermann  <bauerman@br.ibm.com>
5966
5967         * gdb.texinfo (Values From Inferior): Change gdb.Value.address
5968         from a method to an attribute.
5969
5970 2009-03-26  Thiago Jung Bauermann  <bauerman@br.ibm.com>
5971
5972         * gdb.texinfo (Values From Inferior): Document is_optimized_out
5973         attribute.
5974
5975 2009-03-25  Pedro Alves  <pedro@codesourcery.com>
5976
5977         * observer.texi (thread_exit): Add "silent" parameter.
5978
5979 2009-03-22  Pedro Alves  <pedro@codesourcery.com>
5980
5981         * observer.texi (about_to_proceed): New.
5982
5983 2009-03-21  Jeremy Bennett  <jeremy.bennett@embecosm.com>
5984
5985         * gdbint.texinfo (everywhere): Use braces {} in @deftypeXX type
5986         field throughout to handle types with spaces in them.  Fix typos
5987         found by aspell.
5988         (Summary, Requirements, Contributors): New first chapter,
5989         "Summary" added, old Requirements section moved there, and new
5990         section, "Contributors" added.
5991         (Initializing a New Architecture, Register Representation)
5992         (Frame Interpretation, Inferior Call Setup, Adding a New Target)
5993         (Porting gdb): These sections extended and updated.
5994         (Compiler Characteristics): This section (empty) deleted.
5995         (Defining Other Architecture Features): This section renamed and
5996         duplicate material removed from (formerly "Target Conditionals").
5997         Use braces {} in @deftypeXX type field throughout to handle types
5998         with spaces in them. Typos found by aspell fixed.
5999
6000         * stack_frame.svg: New file, source of image for gdbint.texinfo.
6001         * stack_frame.pdf: Version of image for PDF output.
6002         * stack_frame.png: Version of image for HTML output and for Emacs.
6003         * stack_frame.txt: Version of image for Info output.
6004         * stack_frame.eps: Version of image for TeX DVI output.
6005
6006 2009-03-21  Eli Zaretskii  <eliz@gnu.org>
6007
6008         * gdb.texinfo (Character Sets): Fix last change.
6009
6010 2009-03-21  Thiago Jung Bauermann  <bauerman@br.ibm.com>
6011
6012         * gdb.texinfo (Values From Inferior): Fix optional arguments
6013         markup.
6014         (Commands In Python): Adjust argument names of gdb.Command.__init__
6015         to what the function accepts as keywords.
6016
6017 2008-03-20  Tom Tromey  <tromey@redhat.com>
6018
6019         * gdb.texinfo (Convenience Vars): Document convenience functions.
6020         (Functions In Python): New node.
6021         (Python API): Update.
6022
6023 2009-03-20  Tom Tromey  <tromey@redhat.com>
6024
6025         * gdb.texinfo (Character Sets): Remove obsolete text.  Document
6026         set target-wide-charset.
6027         (Requirements): Mention iconv.
6028
6029 2009-03-17  Hui Zhu  <teawater@gmail.com>
6030
6031         * gdb.texinfo: Change the introduce of "disassemble-next-line".
6032
6033 2009-03-17  Hui Zhu  <teawater@gmail.com>
6034
6035         * gdb.texinfo: Add documentation for disassemble-next-line.
6036
6037 2009-03-16  Thiago Jung Bauermann  <bauerman@br.ibm.com>
6038
6039         * gdb.texinfo (Commands In Python): Remove tindex entries.
6040
6041 2009-03-15  Jan Kratochvil  <jan.kratochvil@redhat.com>
6042
6043         * gdb.texinfo (Returning): New description for missing debug info.
6044
6045 2009-03-14  Pedro Alves  <pedro@codesourcery.com>
6046
6047         * gdb.texinfo (Remote Configuration): Document query-attached.
6048         (General Query Packets): Document qAttached.
6049
6050 2009-03-05  Pedro Alves  <pedro@codesourcery.com>
6051
6052         * gdb.texinfo (Background Execution): Better describe the set
6053         target-async command.
6054         (Maintenance Commands): Delete description of the `maint set/show
6055         linux-async' and `maint set/show remote-async' commands.
6056
6057 2009-02-18  Vladimir Prus  <vladimir@codesourcery.com>
6058
6059         * gdb.texinfo (GDB/MI Async Records): Add double-spaces
6060         between sentences.
6061
6062 2009-02-18  Vladimir Prus  <vladimir@codesourcery.com>
6063
6064         * gdb.texinfo (GDB/MI Async Records): Document the
6065         =library-loaded and =library-unloaded notifications.
6066
6067 2009-02-17  Vladimir Prus  <vladimir@codesourcery.com>
6068
6069         * observer.texi (test_notification): New observer.
6070
6071 2009-02-14  Vladimir Prus  <vladimir@codesourcery.com>
6072
6073         * observer.texi: Add parameter 'print_frame' to normal_stop
6074         observer.
6075
6076 2009-02-07  Eli Zaretskii  <eliz@gnu.org>
6077
6078         * gdb.texinfo (Basic Python): Fix change from 2009-02-04.
6079         (Commands In Python): Fix COMMAND_* constants in last change.  Use
6080         @kbd for interactive input.  Add cross-references and index
6081         entries.
6082
6083 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
6084
6085         * gdb.texinfo (Signals): Document $_siginfo.
6086         (Convenience Variables): Mention $_siginfo.
6087         (Remote Configuration): Document qXfer:siginfo:read,
6088         qXfer:siginfo:write packets, and the read-siginfo-object,
6089         write-siginfo-object commands.
6090
6091 2009-02-06  Pedro Alves  <pedro@codesourcery.com>
6092
6093         * gdbint.texinfo (Values): New chapter.
6094
6095 2009-02-06  Tom Tromey  <tromey@redhat.com>
6096
6097         * gdb.texinfo (Python API): Add entry for Commands In Python.
6098         (Commands In Python): New node.
6099
6100 2009-02-05  Tom Tromey  <tromey@redhat.com>
6101
6102         * gdb.texinfo (Values From Inferior): Document Value.string.
6103
6104 2009-02-05  Tom Tromey  <tromey@redhat.com>
6105
6106         * gdb.texinfo (Basic Python): Document execute's from_tty
6107         argument.
6108
6109 2009-02-04  Tom Tromey  <tromey@redhat.com>
6110
6111         * gdb.texinfo (Basic Python): Document gdb.history.
6112
6113 2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>
6114
6115         * gdb.texinfo (GDB/MI Thread Commands): Document the
6116         'current-thread-id' field.  Remove the example with zero threads,
6117         since current GDB won't ever report that if there's inferior.
6118
6119 2009-01-30  Vladimir Prus  <vladimir@codesourcery.com>
6120
6121         * gdb.texinfo (GDB/MI Breakpoint Commands): Document the -d
6122         option to -break-insert.
6123
6124 2009-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
6125             Jerome Guitton  <guitton@adacore.com>
6126
6127         * gdb.texinfo (Startup): Document --with-system-gdbinit.
6128         (System-wide configuration): New section.
6129
6130 2009-01-26  Pedro Alves  <pedro@codesourcery.com>
6131
6132         PR gdb/7580:
6133         * gdb.texinfo (Maintenance Commands): Document "maint set|show
6134         internal-error|internal-warning quit|corefile ask|yes|no".
6135
6136 2009-01-26  Pedro Alves  <pedro@codesourcery.com>
6137
6138         * gdb.texinfo (Using the `gdbserver' Program): Document
6139         --remote-debug.
6140
6141 2009-01-23  Doug Evans  <dje@google.com>
6142
6143         * gdb.texinfo: Add nexti to list of commands that support
6144         background execution.
6145
6146 2009-01-14  Daniel Jacobowitz  <dan@codesourcery.com>
6147
6148         * gdb.texinfo (Define, Hooks): Document prefix command support.
6149
6150 2009-01-14  Joseph Myers  <joseph@codesourcery.com>
6151             Carlos O'Donell  <carlos@codesourcery.com>
6152
6153         Fixes for makeinfo --html.
6154
6155         * annotate.texinfo: Use @copying and @insertcopying.  Use
6156         @ifnottex in place of @ifinfo.
6157         * gdb.texinfo: Use @copying and @insertcopying.  Use @ifnottex in
6158         place of @ifinfo.  Use @ifnotinfo for one index entry.
6159         * gdbint.texinfo: Use @copying and @insertcopying.  Use @ifnottex
6160         in place of @ifinfo.
6161         * stabs.texinfo: Use @copying and @insertcopying.  Use @ifnottex
6162         in place of @ifinfo.  Include contents at start unconditionally.
6163
6164 2009-01-13  Pedro Alves  <pedro@codesourcery.com>
6165
6166         * gdb.texinfo (General Query Packets): Remove @var{} around the
6167         "spu" literal string.
6168
6169 2009-01-07  Pedro Alves  <pedro@codesourcery.com>
6170
6171         * gdb.texinfo (Error in Breakpoints): Delete mention of "The same
6172         program may be running in another process" errors.
6173         * gdbint.texinfo (Native Conditionals): Delete
6174         ONE_PROCESS_WRITETEXT description.
6175
6176 2009-01-07  Joel Brobecker  <brobecker@adacore.com>
6177
6178         * gdbint.texinfo (Start of New Year Procedure): Add the "coding"
6179         emacs local variable to be placed at the end of the ChangeLog.
6180         Add server.c and gdbreplay.c to the list of files where the
6181         copyright year needs to be updated.
6182
6183 2009-01-06  Sandra Loosemore  <sandra@codesourcery.com>
6184
6185         * gdb.texinfo (Remote Configuration): Document new
6186         "set/show tcp auto-retry" and "set/show tcp connect-timeout"
6187         commands.
6188
6189 2008-12-28  Pedro Alves  <pedro@codesourcery.com>
6190
6191         * gdbint.texinfo (gdbarch_cannot_fetch_register): Don't mention
6192         FETCH_INFERIOR_REGISTERS.
6193         (Native Conditionals): Remove obsolete CHILD_PREPARE_TO_STORE,
6194         FETCH_INFERIOR_REGISTERS descriptions.  Remove
6195         gdbarch_get_longjmp_target descrition, since already described in
6196         Target Conditionals.  Move gdbarch_fp0_regnum description to ...
6197         (Target Conditionals): ... here.
6198
6199 2008-12-16  Joel Brobecker  <brobecker@adacore.com>
6200
6201         * gdb.texinfo (Omissions from Ada): Add missing GDB prompt in
6202         examples.
6203         (Additions to Ada): Likewise.  Add the missing opening and closing
6204         parenthesis of the GDB prompt in one of the examples.
6205
6206 2008-12-14  Joel Brobecker  <brobecker@adacore.com>
6207
6208         * gdb.texinfo (Omissions from Ada): Remove incorrect documentation
6209         about the result of 'Address not being of type System.Address.
6210         This problem has been fixed a while ago.
6211
6212 2008-12-02  Vladimir Prus  <vladimir@codesourcery.com>
6213
6214         MI non-stop and multiprocess docs.
6215
6216         * gdb.texinfo (GDB/MI): New section 'GDB/MI General Design'
6217         (GDB/MI Output Records): New section 'GDB/MI Frame Information'
6218         Adjust documentation for *stopped, document =thread-created,
6219         =thread-exited, =thread-group-created and =thread-group-exited.
6220         (GDB/MI Thread Commands): Document the 'state' field in
6221         -thread-info output.
6222         (GDB/MI Program Execution): Mention --all and --thread-group
6223         options.
6224         (GDB/MI Variable Objects): Describe floating and fixed variable
6225         objects.
6226         (GDB/MI Miscellaneous Commands): Document -list-thread-groups.
6227
6228 2008-12-02  Vladimir Prus  <vladimir@codesourcery.com>
6229
6230         * gdb.texinfo (Operating System Information): New appendix.
6231         (Operating System Auxiliary Information): Document 'info os processes'
6232         (Remote Configuration): Document 'osdata'
6233         (General Query Packets): Document qXfer:osdata:read.
6234
6235 2008-11-27  Tristan Gingold  <gingold@adacore.com>
6236
6237         * gdb.texinfo (Darwin): Document Darwin specific features.
6238
6239 2008-11-25  Jan Kratochvil  <jan.kratochvil@redhat.com>
6240
6241         * gdbint.texinfo (Target Conditionals): Extend the
6242         gdbarch_breakpoint_from_pc description.
6243
6244 2008-11-22  Vladimir Prus  <vladimir@codesourcery.com>
6245
6246         * gdb.texinfo (M68K Features): Fix typo.
6247
6248 2008-11-18  Paul Pluzhnikov  <ppluzhnikov@google.com>
6249
6250         * gdb.texinfo (Symbols): Mention printing containing
6251         image name in "info symbol".
6252         (Maint translate-address): Likewise.
6253
6254 2008-11-18  Joel Brobecker  <brobecker@adacore.com>
6255
6256         * gdb.texinfo (Set Catchpoints): Remove the documentation of
6257         commands "catch load" and "catch unload".
6258
6259 2008-11-17  Vladimir Prus  <vladimir@codesourcery.com>
6260
6261         * gdb.texinfo (GDB/MI Async Records): Document
6262         =thread-selected.
6263
6264 2008-11-17  Vladimir Prus  <vladimir@codesourcery.com>
6265
6266         * observer.texi (new_inferior, inferior_exit): New observers.
6267
6268 2008-10-27  Pedro Alves  <pedro@codesourcery.com>
6269
6270         * gdbint.texinfo (Adding a New Target): Don't mention TDEPFILES,
6271         .mt files, TM_CLIBS or TM_CDEPS.
6272         (x86 Watchpoints): Don't mention TDEPFILES.
6273
6274 2008-10-24  Sandra Loosemore  <sandra@codesourcery.com>
6275
6276         * gdb.texinfo (Remote Protocol): Add new nodes to menu.
6277         (Overview): Mention notifications and non-stop mode behavior.
6278         (Packets): Update documentation of ?, vAttach, vCont, and vRun
6279         with non-stop mode behavior.  Add vStopped description.
6280         (Stop Reply Packets):  Update list of packets that return
6281         stop replies.  Mention non-stop behavior.
6282         (General Query Packets): Document QNonStop packet and associated
6283         qSupported query response.
6284         (Interrupts): Clarify multi-threaded behavior.  Mention non-stop
6285         behavior.
6286         (Notification Packets): New section.
6287         (Remote Non-Stop): New section.
6288         (File-I/O Overview): Mention non-stop behavior.
6289
6290 2008-10-24  Hui Zhu  <teawater@gmail.com>
6291             Pedro Alves  <pedro@codesourcery.com>
6292
6293         * gdb.texinfo (displaced-stepping): Describe the auto mode
6294         setting, and say it's the default.  This is now a mainstream
6295         setting instead of a maintenance setting.
6296
6297 2008-10-23  Pedro Alves  <pedro@codesourcery.com>
6298
6299         * observer.texi (thread_stop_requested): New.
6300
6301 2008-10-22  Joel Brobecker  <brobecker@adacore.com>
6302
6303         * gdb.texinfo (Ada Tasks, Ada Tasks and Core Files): New nodes.
6304         (Patching): Replace incorrect usage of @samp by @kbd.
6305
6306 2008-10-17  Michael Snyder  <msnyder@vmware.com>
6307
6308         * gdb.texinfo: Add documentation for reverse execution.
6309
6310 2008-10-16  Thiago Jung Bauermann  <bauerman@br.ibm.com>
6311             Eli Zaretskii  <eliz@gnu.org>
6312
6313         * gdb.texinfo. (Values From Inferior): New subsubsection.
6314
6315 2008-10-06  Doug Evans  <dje@google.com>
6316
6317         * gdb.texinfo (set debug dwarf2-die): Document it.
6318
6319 2008-10-01  Joel Brobecker  <brobecker@adacore.com>
6320
6321         * gdb.texinfo (catch) [exception]: Document how to insert
6322         a breakpoint on user-defined exceptions when the exception
6323         name is identical to one of the language-defined ones.
6324
6325 2008-09-27  Tom Tromey  <tromey@redhat.com>
6326
6327         * gdb.texinfo (Macros): Remove text about stringification,
6328         varargs, and splicing.
6329
6330 2008-09-27  Tom Tromey  <tromey@redhat.com>
6331
6332         * gdbint.texinfo (Language Support): Remove text about omitting
6333         support for a language.
6334
6335 2008-09-23  Doug Evans  <dje@google.com>
6336
6337         * gdb.texinfo (info dcache): Update.
6338
6339 2008-09-22  Sandra Loosemore  <sandra@codesourcery.com>
6340
6341         * gdb.texinfo (Packets): Add info on thread-id syntax and
6342         multiprocess extensions.
6343         <D>: Document multiprocess form of packet.
6344         <H>: Use thread-id syntax.
6345         <T>: Likewise.
6346         <vCont>: Likewise.  Note this is required for multiprocess.
6347         <vKill>: New packet.
6348         (Stop Reply Packets) <T>: Use thread-id syntax.
6349         <W>: Document multiprocess form of reply.
6350         <X>: Likewise.
6351         (General Query Packets) <qC>: Use thread-id syntax.
6352         <qfThreadInfo>: Likewise.
6353         <qGetTLSAddr>: Likewise.
6354         <qP>: Likewise.
6355         <qSupported>: Add "multiprocess" feature.
6356         <qThreadExtraInfo>: Use thread-id syntax.
6357
6358 2008-09-22  Stan Shebs  <stan@codesourcery.com>
6359
6360         * gdb.texinfo (Inferiors): New section.
6361
6362 2008-09-12  Pedro Alves  <pedro@codesourcery.com>
6363
6364         * gdbint.texinfo (Native Debugging): Mention NAT_GENERATED_FILES.
6365
6366 2008-09-11  Ulrich Weigand  <uweigand@de.ibm.com>
6367
6368         * gdbint.texinfo (Target Conditionals): Remove documentation
6369         for gdbarch_name_of_malloc.
6370
6371 2008-09-03  Angela Marie Thomas <angela@releasedominatrix.com>
6372
6373         * gdb.texinfo (Interrupts): Mention TCP interface for
6374         sending BREAK.
6375
6376 2008-08-26  Ulrich Weigand  <uweigand@de.ibm.com>
6377
6378         * gdb.texinfo (Commands to Specify Files): Document "remote:"
6379         argument prefix to "set sysroot".
6380
6381 2008-08-21  Paul N. Hilfinger  <hilfinger@adacore.com>
6382
6383         * gdb.texinfo (Omissions from Ada): Describe new treatment of True
6384         and False.
6385
6386 2008-08-20  Vladimir Prus  <vladimir@codesourcery.com>
6387
6388         * gdb.textinfo (GDB/MI Miscellaneous Commands): Use @table
6389         for possible features of -list-features.
6390
6391 2008-08-19  Vladimir Prus  <vladimir@codesourcery.com>
6392
6393         * gdb.texinfo (Background execution): Adjust example
6394         (GDB/MI Miscellaneous Commands): Document -list-target-features.
6395
6396 2008-08-19  Vladimir Prus  <vladimir@codesourcery.com>
6397
6398         * doc/gdb.texinfo (PowerPC): Fix typo.
6399         (PowerPC features): Fix typo.
6400
6401 2008-08-18  Pedro Alves  <pedro@codesourcery.com>
6402
6403         * observer.texi (thread_ptid_changed): New.
6404
6405 2008-08-18  Luis Machado  <luisgpm@br.ibm.com>
6406
6407         * doc/gdb.texinfo (PowerPC): Mention Extended FPR's for POWER7.
6408         (PowerPC features): Mention feature set for VSX registers.
6409
6410 2008-08-13  Joel Brobecker  <brobecker@adacore.com>
6411
6412         * gdb.texinfo (Ada Mode Intro): Improve the documentation regarding
6413         the direct visibility of all names in user-written packages.
6414
6415 2008-08-13  Pedro Alves  <pedro@codesourcery.com>
6416
6417         * gdb.texinfo (breakpoint always-inserted) Describe the auto mode
6418         setting, and make it the default.
6419         (Non-Stop Mode): Remove "set breakpoints always-inserted 1" from
6420         non-stop script example.
6421
6422 2008-08-12  Thiago Jung Bauermann  <bauerman@br.ibm.com>
6423
6424         * gdbint.texinfo (Raw and Virtual Register Representations): Fix
6425         reference to the "Using Different Register and Memory Data
6426         Representation" section.
6427
6428 2008-08-12  Sandra Loosemore  <sandra@codesourcery.com>
6429
6430         * gdb.texinfo (Remote Configuration): Document set remote noack-packet.
6431         (Remote Protocol): Add Packet Acknowledgment to menu.
6432         (Overview): Mention +/- can be disabled, and point to new section
6433         where this is discussed in detail.
6434         (General Query Packets): Document QStartNoAckMode packet, and
6435         corresponding qSupported reply.
6436         (Packet Acknowledgment): New section.
6437
6438 2008-08-11  Sandra Loosemore  <sandra@codesourcery.com>
6439             Pedro Alves  <pedro@codesourcery.com>
6440
6441         * gdb.texinfo (Threads): Move paragraph about automatic thread
6442         selection to All-Stop Mode subsection.
6443         (Thread Stops): Reorganize existing material into subsections.
6444         Add introductory blurb and menu.
6445         (Non-Stop Mode): New subsection.
6446         (Background Execution): New subsection.
6447         (Maintenance Commands): Add cross-references from async mode
6448         commands to the new Background Execution section.
6449
6450 2008-08-06  Tom Tromey  <tromey@redhat.com>
6451
6452         * gdb.texinfo (Extending GDB): New chapter.
6453         (Sequences): Demoted chapter, now a section under the new
6454         Extending GDB chapter.
6455         (Python): New section.
6456
6457 2008-07-31  Stan Shebs  <stan@codesourcery.com>
6458
6459         * gdbint.texinfo: Remove FUNCTION_EPILOGUE_SIZE.
6460
6461 2008-07-29  Stan Shebs  <stan@codesourcery.com>
6462
6463         * gdbint.texinfo: General round of cleanup and minor
6464         clarifications.
6465         (Breakpoint Handling): Remove mention of BREAKPOINT macro.
6466         (Longjmp Support): Update description to reflect how it is done
6467         for targets without using native header.
6468         (Symbol Handling): Add a little more general explanation.
6469         (COFF, ELF): Mention stabs encapsulation.
6470         (DWARF 3): New section.
6471         (Adding a New Host): Scrub out some obsolete bits.
6472         (Generic Host Support Files): Mention ser-pipe.c, ser-mingw.c.
6473         (Host Conditionals): Remove descriptions of NO_STD_REGS,
6474         HAVE_MMAP, HAVE_TERMIO, INT_MAX etc, LONGEST, HAVE_LONG_DOUBLE,
6475         PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, L_SET, SEEK_CUR,
6476         SEEK_SET, STOP_SIGNAL, USG.
6477         (Raw and Virtual Register Representations): Ditto for
6478         DEPRECATED_REGISTER_RAW_SIZE, DEPRECATED_REGISTER_VIRTUAL_SIZE,
6479         DEPRECATED_REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_TYPE.
6480         (Target Conditionals): Ditto for DEPRECATED_FP_REGNUM,
6481         DEPRECATED_FRAMELESS_FUNCTION_INVOCATION, DEPRECATED_FRAME_CHAIN,
6482         DEPRECATED_FRAME_CHAIN_VALID, DEPRECATED_FRAME_INIT_SAVED_REGS,
6483         DEPRECATED_FRAME_SAVED_PC, DEPRECATED_FUNCTION_START_OFFSET,
6484         DEPRECATED_REGISTER_VIRTUAL_SIZE,
6485         DEPRECATED_REGISTER_VIRTUAL_TYPE,
6486         DEPRECATED_USE_STRUCT_CONVENTION.
6487         Describe gdbarch_deprecated_fp_regnum.
6488         Update description of gdbarch_print_insn.
6489         (Adding a New Target): Scrub out obsolete bits.
6490         (Obsolete Conditionals): Remove entire section.
6491
6492 2008-07-25  Tom Tromey  <tromey@redhat.com>
6493
6494         * observer.texi (GDB Observers): Document new observers:
6495         breakpoint_created, breakpoint_deleted, breakpoint_modified,
6496         tracepoint_created, tracepoint_deleted, tracepoint_modified,
6497         architecture_changed.
6498
6499 2008-07-21  Stan Shebs  <stan@codesourcery.com>
6500
6501         * gdbint.texinfo: Refer to target_so_ops.in_dynsym_resolve_code
6502         instead of IN_SOLIB_DYNSYM_RESOLVE_CODE.
6503
6504 2008-07-21  Tom Tromey  <tromey@redhat.com>
6505
6506         * observer.texi (GDB Observers): Remove obsolete comment.
6507         <executable_changed>: Remove argument.
6508
6509 2008-07-18  Tom Tromey  <tromey@redhat.com>
6510
6511         * gdb.texinfo (Macros): Update.  Use @code rather than @command.
6512
6513 2008-07-10  Doug Evans  <dje@google.com>
6514
6515         * doc/gdb.texinfo: Document "set print symbol-loading on|off".
6516
6517 2008-07-10  Jan Kratochvil  <jan.kratochvil@redhat.com>
6518
6519         * gdb.texinfo (Starting): Document "set disable-randomization".
6520
6521 2008-07-07  Andreas Schwab  <schwab@suse.de>
6522
6523         * gdb.texinfo (GDB/MI Target Manipulation): Fix last change.
6524
6525 2008-07-06  Vladimir Prus  <vladimir@codesourcery.com>
6526
6527         * gdb.texinfo (GDB/MI Target Manipulation): Add
6528         example of -target-attach.
6529
6530 2008-06-10  Vladimir Prus  <vladimir@codesourcery.com>
6531
6532         * observer.texi (target_resumed): New observer.
6533         * gdb.texinfo (GDB/MI Output Records): Document *running.
6534
6535 2008-06-06  Tom Tromey  <tromey@redhat.com>
6536
6537         * gdb.texinfo (Completion): Add field name example.
6538
6539 2008-06-06  Marc Khouzam  <marc.khouzam@ericsson.com>
6540
6541         * gdb.texinfo (GDB/MI Program Context): Added example
6542         to -exec-arguments
6543
6544 2008-06-05  Nick Roberts  <nickrob@snap.net.nz>
6545
6546         * annotate.texinfo (Multi-threaded Apps): Add entry for thread-changed
6547         annotation.
6548
6549 2008-06-05  Vladimir Prus  <vladimir@codesourcery.com>
6550             Nathan Sidwell  <nathan@codesourcery.com>
6551             Joseph Myers  <joseph@codesourcery.com>
6552
6553         * configure.ac: Include ../../config/acx.m4.  Use ACX_PKGVERSION
6554         and ACX_BUGURL.
6555         * configure: Regenerate.
6556         * Makefile.in (PKGVERSION, BUGURL_TEXI): Define.
6557         (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT.
6558         * gdb.texinfo: Use VERSION_PACKAGE and BUGURL.  Remove
6559         mailing-list-specific text about bug reporting unless
6560         BUGURL_DEFAULT.
6561
6562 2008-06-05  Pedro Alves  <pedro@codesourcery.com>
6563
6564         * gdb.texinfo (-target-select): Remove reference to target async.
6565         (Maintenance Commands): Document "maint set/show remote-async".
6566
6567 2008-06-04  Marc Khouzam  <marc.khouzam@ericsson.com>
6568
6569         * gdb.texinfo (GDB/MI File Transfer Commands): Typo
6570         in -target-file-get section.
6571
6572 2008-05-22  Pedro Alves  <pedro@codesourcery.com>
6573
6574         * gdb.texinfo (vAttach, vRun): Re-remove requirement of the stub
6575         killing the inferior when it is already debugging a process.
6576
6577 2008-05-21  Joel Brobecker  <brobecker@adacore.com>
6578
6579         * gdb.texinfo (Continuing and Stepping): Document the new "fin"
6580         abbreviation for "finish".
6581
6582 2008-05-21  Nick Roberts  <nickrob@snap.net.nz>
6583
6584         * annotate.texinfo (Multi-threaded Apps): New node for new annotation.
6585
6586 2008-05-15  Daniel Jacobowitz  <dan@codesourcery.com>
6587
6588         * gdbint.texinfo (Target Conditionals): Delete entry for
6589         gdbarch_dwarf_reg_to_regnum.
6590
6591 2008-05-09  Doug Evans  <dje@google.com>
6592
6593         * gdb.texinfo: Document "find" command, qSearch:memory packet.
6594
6595 2008-05-05  Doug Evans  <dje@google.com>
6596
6597         * gdb.texinfo (disassemble): Document /m modifier.
6598
6599 2008-05-05  Vladimir Prus  <vladimir@codesourcery.com>
6600
6601         * gdb.texinfo (Maintenance Commands): Clarify that "maint time"
6602         will not report the time of commands that run the target.
6603
6604 2008-05-03  Vladimir Prus  <vladimir@codesourcery.com>
6605
6606         * gdb.texinfo (GDB/MI Output Records): Add
6607         missing semicolon.
6608
6609 2008-05-03  Vladimir Prus  <vladimir@codesourcery.com>
6610
6611         * gdb.texinfo (GDB/MI Output Records):
6612         Document =thread-create and =thread-exited.
6613
6614 2008-05-03  Vladimir Prus  <vladimir@codesourcery.com>
6615
6616         * gdb.texinfo (GDB/MI Development and Front Ends):
6617         Remove mention of dmi-discuss.
6618
6619 2008-05-03  Pedro Alves  <pedro@codesourcery.com>
6620
6621         * observer.texi (thread_exit): New.
6622
6623 2008-05-02  Pedro Alves  <pedro@codesourcery.com>
6624
6625         * gdb.texinfo (Debugging Output): Document "set/show debug
6626         displaced".
6627         (Maintenance Commands): Document "maint set/show
6628         can-use-displaced-stepping".
6629
6630 2008-05-02  Daniel Jacobowitz  <dan@codesourcery.com>
6631
6632         * gdb.texinfo (ARM): Document set/show arm fallback-mode
6633         and set/show arm force-mode.
6634
6635 2008-05-02  Andreas Schwab  <schwab@suse.de>
6636
6637         * gdbint.texinfo (Algorithms): Describe
6638         target_watchpoint_addr_within_range.
6639
6640 2008-04-30  Daniel Jacobowitz  <dan@codesourcery.com>
6641
6642         * gdbint.texinfo (Stack Frames): New chapter.
6643         (Algorithms): Move Frames text to the new chapter.
6644         (Target Conditionals): Delete SAVE_DUMMY_FRAME_TOS.  Document
6645         gdbarch_dummy_id instead of gdbarch_unwind_dummy_id.
6646
6647 2008-04-24  Vladimir Prus  <vladimir@codesourcery.com>
6648
6649         * gdb.texinfo (GDB/MI Output Syntax): Clarify that async
6650         output does not necessary include any tokens.
6651
6652 2008-04-22  Corinna Vinschen  <vinschen@redhat.com>
6653
6654         * gdb.texinfo (Set SH Calling convention): New @item.
6655         (Show SH Calling convention): Ditto.
6656
6657 2008-04-22  Markus Deuling  <deuling@de.ibm.com>
6658
6659         * gdb.texinfo (Fortran Operators): Describe '%' operator.
6660
6661 2008-04-20  Eli Zaretskii  <eliz@gnu.org>
6662
6663         * gdb.texinfo (Set Breaks): Mention that multiple location
6664         breakpoints need line number info.  Add index entries.
6665
6666 2008-04-19  Craig Silverstein  <csilvers@google.com>
6667
6668         * gdb.texinfo (Requirements): Add an optional requirement on
6669         zlib.
6670         * gdbint.texinfo (Debugging File Formats): Add new subsection for
6671         Compressed DWARF 2.
6672
6673 2008-04-16  Aleksandar Ristovski  <aristovski@qnx.com>
6674
6675         * gdb.texinfo (GDB/MI Simple Examples): Added 'disp' field to the
6676         sample output for 'stopped,reason="breakpoint-hit"' message.
6677         (GDB/MI Program Execution): Likewise.
6678
6679 2008-04-09  Marc Khouzam  <marc.khouzam@ericsson.com>
6680
6681         * gdb.texinfo (GDB/MI Variable Objects): Add anchor to
6682         -var-set-format.  Add -f option to -var-evaluate-expression.
6683
6684 2008-04-03  Joel Brobecker  <brobecker@adacore.com>
6685
6686         * gdb.texinfo (Breakpoint Menus): Delete. Contents moved inside
6687         new node "Ambiguous Expressions".  Replace references to this
6688         node by references to "Ambiguous Expressions" throughout.
6689         (Ambiguous Expressions): New node.
6690
6691 2008-03-26  Daniel Jacobowitz  <dan@codesourcery.com>
6692
6693         * gdb.texinfo (MIPS Features, PowerPC Features): Add @node.
6694
6695 2008-03-21  Pedro Alves  <pedro@codesourcery.com>
6696
6697         * gdb.texinfo (Debugging Output): Document
6698         "set/show debug lin-lwp-async".
6699         (Maintenance Commands): Document "maint set/show linux-async".
6700
6701 2008-03-21  Daniel Jacobowitz  <dan@codesourcery.com>
6702
6703         * gdb.texinfo (Expressions): Update description of malloced arrays.
6704
6705 2008-03-15  Vladimir Prus  <vladimir@codesourcery.com>
6706
6707         * gdb.texinfo (Thread Commands): Document
6708         -thread-info.  Remove -thread-list-all-threads.
6709
6710 2008-03-14  Pedro Alves  <pedro@codesourcery.com>
6711             Sandra Loosemore  <sandra@codesourcery.com>
6712
6713         * gdb.texinfo (Library List Format): Update to mention the
6714         possibility to pass section addresses instead of segment
6715         addresses.
6716
6717 2008-03-10  Daniel Jacobowitz  <dan@codesourcery.com>
6718
6719         * gdb.texinfo (Starting): Document "set exec-wrapper".
6720         (Server): Document gdbserver --wrapper.
6721
6722 2008-03-03  Daniel Jacobowitz  <dan@codesourcery.com>
6723
6724         * gdb.texinfo (Set Watchpoints): Mention watchpoints on
6725         unreadable memory.  Delete obsolete SPARClite reference.
6726
6727 2008-02-28  Daniel Jacobowitz  <dan@codesourcery.com>
6728
6729         * gdb.texinfo (Starting): Mention always-running targets.
6730         (Target Commands): Add an anchor for load.
6731         (Connecting): Explain continue instead of run.
6732
6733 2008-02-27  Daniel Jacobowitz  <dan@codesourcery.com>
6734
6735         * gdb.texinfo (Debugging Output): Document "set debug timestamp".
6736
6737 2008-02-26  Nick Roberts  <nickrob@snap.net.nz>
6738
6739         * gdb.texinfo (Set Breaks): Revert description of Enb column of
6740         breakpoint table.
6741
6742 2008-02-19  Pedro Alves  <pedro@codesourcery.com>
6743
6744         * gdb.texinfo (vAttach, vRun): Remove requirement of the stub
6745         killing the inferior when it is already debugging a process.
6746
6747 2008-02-13  Markus Deuling  <deuling@de.ibm.com>
6748
6749         * gdbint.texinfo (Build Script): New section. Mention new build script
6750         gdb_buildall.sh.
6751
6752 2008-02-01  Jim Blandy  <jimb@red-bean.com>
6753
6754         * gdb.texinfo (Help): Summarize 'info args' correctly.
6755
6756 2008-01-30  Thiago Jung Bauermann  <bauerman@br.ibm.com>
6757
6758         * gdb.texinfo: (Decimal Floating Point): Mention pseudo-registers
6759         available in PowerPC architecture.
6760         (Embedded Processors): Change node name of PowerPC item in menu.
6761         (PowerPC): Rename to...
6762         (PowerPC Embedded): this.
6763         (Architectures): Add new PowerPC item in menu.
6764         (PowerPC): New node.
6765
6766 2008-01-30  Daniel Jacobowitz  <dan@codesourcery.com>
6767
6768         * gdb.texinfo (Multi-Process Mode for gdbserver): Use @kbd for
6769         commands.
6770
6771 2008-01-30  Daniel Jacobowitz  <dan@codesourcery.com>
6772
6773         * gdb.texinfo (Setting Catchpoints): Mention features
6774         supported on GNU/Linux.
6775
6776 2008-01-30  Nick Roberts  <nickrob@snap.net.nz>
6777
6778         * gdb.texinfo (GDB/MI File Commands): Describe new output
6779         field for MI command -file-list-exec-source-file.
6780
6781 2008-01-29  Daniel Jacobowitz  <dan@codesourcery.com>
6782
6783         * gdb.texinfo (Using the `gdbserver' Program): Add security
6784         warning.  Rearrange into subsections and subsubsections.  Document
6785         --multi and --debug.  Correct --with-sysroot typo.  Update --attach
6786         usage.  Make load reference clearer.  Document monitor exit.
6787         (Remote Configuration): Document set remote exec-file, attach-packet,
6788         and run-packet.
6789         (Packets): Document vAttach and vRun.
6790
6791 2008-01-29  Nick Roberts  <nickrob@snap.net.nz>
6792
6793         * gdb.texinfo (Processes): Mention process command.
6794         detach-on-follow -> detach-on-fork.
6795
6796 2008-01-28  Daniel Jacobowitz  <dan@codesourcery.com>
6797
6798         * gdbint.texinfo (Native Conditionals): Remove
6799         SHELL_COMMAND_CONCAT and SHELL_FILE.
6800
6801 2008-01-26  Eli Zaretskii  <eliz@gnu.org>
6802
6803         * gdb.texinfo (Specify Location): Improve wording.
6804
6805 2008-01-23  Chris Demetriou  <cgd@google.com>
6806
6807         * gdb.texinfo (Threads): Document new "set print thread-events"
6808         and "show print thread-events" commands.
6809
6810 2008-01-19  Eli Zaretskii  <eliz@gnu.org>
6811
6812         * gdb.texinfo (Specify Location): New section.
6813         (Delete Breaks, Edit, Set Breaks): Remove description of
6814         locations.  Instead, add a reference to "Specify Location".
6815         (Machine Code, Jumping, Thread Stops, Continuing and Stepping)
6816         (Symbols): Refer to "Specify Location" for the valid forms of
6817         linespecs and locations.
6818
6819 2008-01-18  Markus Deuling  <deuling@de.ibm.com>
6820
6821         * gdbint.texinfo (Target Conditionals): Replace the description of
6822         BITS_BIG_ENDIAN with a description of gdbarch_bits_big_endian.
6823
6824 2008-01-12  Paul Hilfinger  <hilfinger@adacore.com>
6825
6826         * gdb.texinfo (C Operators): Remove incorrect parenthetical comment
6827         about &&var, which is rejected by the expression parser.
6828
6829 2008-01-09  Luis Machado  <luisgpm@br.ibm.com>
6830
6831         * gdb.texinfo (Output): Update documentation on using printf with DFP
6832         types.
6833
6834 2008-01-07  Thiago Jung Bauermann  <bauerman@br.ibm.com>
6835
6836         * gdb.texinfo (C and C++): Add Decimal Floating Point format
6837         subsubsection.
6838         (Decimal Floating Point format): New subsubsection.
6839
6840 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
6841
6842         * gdb.texinfo (File Options): Remove mention of the attempt to
6843         open a core file with the -p option.  Don't list -c as a valid
6844         option to attach to a process.
6845
6846 2008-01-05  Pedro Alves  <pedro@codesourcery.com>
6847
6848         * gdbint.texinfo (Host Conditionals): Remove mention of
6849         ALIGN_STACK_ON_ENTRY.
6850
6851 2008-01-05  Joel Brobecker  <brobecker@adacore.com>
6852
6853         * gdbint.texinfo (Start of New Year Procedure): Add item
6854         describing how to update the source and documentation copyright
6855         notices.
6856
6857 2007-12-18  Jim Blandy  <jimb@codesourcery.com>
6858
6859         * gdb.texinfo (Set Watchpoints): Integrate per-thread
6860         watchpoint explanation into the main description of the watchpoint
6861         command; update synopses of 'watch', 'rwatch', and 'awatch'
6862         commands.
6863
6864 2007-12-18  Vladimir Prus  <vladimir@codesourcery.com>
6865
6866         * gdb.texinfo (Miscellaneous gdb/mi Commands):
6867         Document 'pending-breakpoints' feature of
6868         -list-features.
6869
6870 2007-12-17  Luis Machado  <luisgpm@br.ibm.com>
6871
6872         * gdb.texinfo: Add new parameter's description.
6873
6874 2007-12-16  Daniel Jacobowitz  <dan@codesourcery.com>
6875
6876         * gdb.texinfo (Overview): Clarify run-length encoding
6877         example.  Remove the restriction on "+" and "-" characters.
6878
6879 2007-12-15  Eli Zaretskii  <eliz@gnu.org>
6880
6881         * gdb.texinfo (Host I/O Packets): Fix xref syntax.
6882
6883 2007-12-14  Vladimir Prus  <vladimir@codesourcery.com>
6884
6885         * gdb.texinfo (GDB/MI Breakpoint Commands): Document
6886         the -f option for -break-insert, remove -r option,
6887         and clarify specification of location.
6888
6889 2007-11-30  Daniel Jacobowitz  <dan@codesourcery.com>
6890
6891         * gdb.texinfo (Debugging Programs with Multiple Processes): Correct
6892         formatting.
6893         (Remote Debugging): Add File Transfer section.
6894         (Remote Configuration): Document Host I/O packets.
6895         (GDB/MI): Add GDB/MI File Transfer Commands section.
6896         (Host I/O Packets): New section in "Remote Protocol".
6897         (Packets): Add vFile.
6898
6899 2007-11-17  Eli Zaretskii  <eliz@gnu.org>
6900
6901         * gdb.texinfo (Set Breaks, Disabling): Clarify behavior of
6902         breakpoints with multiple locations.
6903         (Breakpoint Menus): Improve wording.
6904         (Output): Fix last change.
6905
6906 2007-11-17  Ulrich Weigand  <uweigand@de.ibm.com>
6907
6908         * Makefile.in (Makefile): Do not depend on target_makefile_frag.
6909
6910 2007-11-15  Doug Evans  <dje@google.com>
6911
6912         * gdb.texinfo (Symbols): Update output of "maint info symtabs".
6913
6914 2007-11-15  Vladimir Prus  <vladimir@codesourcery.com>
6915
6916         * gdbint.texinfo (Native Conditionals): Remove
6917         mention of CLEAR_SOLIB.
6918
6919 2007-11-11  Joel Brobecker  <brobecker@adacore.com>
6920
6921         * gdb.texinfo (Print Settings): Add documentation for "set/show
6922         print frame-arguments".
6923
6924 2007-11-05  Luis Machado  <luisgpm@br.ibm.com>
6925
6926         * gdb.texinfo (Output): Update printf command's description.
6927
6928 2007-10-30  Daniel Jacobowitz  <dan@codesourcery.com>
6929
6930         * gdb.texinfo (PowerPC): Document "set powerpc vector-abi" and "set
6931         powerpc soft-float".
6932
6933 2007-10-24  Daniel Jacobowitz  <dan@codesourcery.com>
6934
6935         * gdb.texinfo (Files): Correct formatting.  Mention Expat
6936         requirement.
6937         (Requirements for Building GDB): Expand the list of Expat
6938         uses.
6939         (Library List Format, Memory Map Format): Mention Expat.
6940         (Target Descriptions): Update Expat wording.
6941
6942 2007-10-24  Daniel Jacobowitz  <dan@codesourcery.com>
6943
6944         * gdbint.texinfo (Register and Memory Data, Target Conditionals):
6945         Document that gdbarch_convert_register_p should return zero for no-op
6946         conversions.
6947
6948 2007-10-22  Ulrich Weigand  <uweigand@de.ibm.com>
6949
6950         * gdbint.texi (Compiler Characteristics): Move documentation
6951         of set_gdbarch_sofun_address_maybe_missing back to ...
6952         (Target Conditionals): ... here to fix build break.
6953
6954 2007-10-19  Ulrich Weigand  <uweigand@de.ibm.com>
6955
6956         * gdbint.texi (Target Conditionals): Remove documentation of
6957         SOFUN_ADDRESS_MAYBE_MISSING, replaced by ...
6958         (Compiler Characteristics): ... documentation of
6959         set_gdbarch_sofun_address_maybe_missing.
6960
6961 2007-10-17  Daniel Jacobowitz  <dan@codesourcery.com>
6962
6963         * gdbint.texinfo (Target Conditionals): Use
6964         frame_unwind_register_unsigned in examples instead of
6965         frame_unwind_unsigned_register.
6966
6967 2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>
6968
6969         * gdb.texinfo (Predefined Target Types): Add int128
6970         and uint128.
6971         (Standard Target Features): Add PowerPC features.
6972
6973 2007-10-15  Daniel Jacobowitz  <dan@codesourcery.com>
6974
6975         * gdb.texinfo (Maintenance Commands): Document "maint print c-tdesc".
6976
6977 2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>
6978
6979         * gdbint.texi (Target Conditionals): Remove documentation
6980         of and references to DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS,
6981         gdbarch_extract_return_value, and gdbarch_store_return_value.
6982
6983 2007-10-12  Ulrich Weigand  <uweigand@de.ibm.com>
6984
6985         * gdbint.texi (Target Conditionals): Remove documentation of
6986         and references to DEPRECATED_REG_STRUCT_HAS_ADDR.
6987
6988 2007-10-11  Kazu Hirata  <kazu@codesourcery.com>
6989
6990         * gdb.texinfo: Mention that inaccessible-by-default is on by
6991         default.
6992
6993 2007-10-11  Daniel Jacobowitz  <dan@codesourcery.com>
6994
6995         * gdbint.texinfo (Target Conditionals): Remove VARIABLES_INSIDE_BLOCK.
6996
6997 2007-09-30  Daniel Jacobowitz  <dan@codesourcery.com>
6998
6999         * gdb.texinfo (Setting Watchpoints): Adjust warning text about
7000         multi-threaded watchpoints.
7001         * gdbint.texinfo (Watchpoints): Describe how watchpoints are
7002         checked.  Describe sticky notification.  Expand description
7003         of steppable and continuable watchpoints.
7004         (Watchpoints and Threads): New subsection.
7005
7006 2007-09-28  Vladimir Prus  <vladimir@codesourcery.com>
7007
7008         * gdb.texinfo (Setting Breakpoints): Revise
7009         documentation for pending breakpoints.  Document
7010         breakpoints with multiple locations.
7011
7012 2007-09-19  Vladimir Prus  <vladimir@codesourcery.com>
7013
7014         * gdb.texinfo (Miscellaneous gdb/mi Commands):
7015         Document -list-features.
7016
7017 2007-09-15  Eli Zaretskii  <eliz@gnu.org>
7018
7019         * gdb.texinfo (Output): Spell out which features of C's printf are
7020         not supported by GDB's printf.
7021         (Separate Debug Files): More accurate wording regarding build ID
7022         and a reference to the ld manual rather than the Fedora wiki.
7023
7024 2007-09-04  Daniel Jacobowitz  <dan@codesourcery.com>
7025             Jim Blandy  <jimb@codesourcery.com>
7026
7027         * gdb.texinfo (Output Formats): Update 'c' description.  Describe 's'.
7028         (Examining Memory): Update mentions of the 's' format.
7029         (Automatic Display): Likewise.
7030
7031 2007-09-02  Daniel Jacobowitz  <dan@codesourcery.com>
7032
7033         * gdb.texinfo: Update the FSF's Back-Cover Text.
7034
7035 2007-09-02  Jan Kratochvil  <jan.kratochvil@redhat.com>
7036             Eli Zaretskii  <eliz@gnu.org>
7037
7038         * gdb.texinfo (Separate Debug Files): Cosmetic quoting removal.
7039         Fixed the ``build ID'' name.  New binaries build instructions for the
7040         build ID inclusion.  Explain how the commands are specific to the build
7041         ID vs. debug link.
7042
7043 2007-09-01  Eli Zaretskii  <eliz@gnu.org>
7044
7045         * gdb.texinfo (Separate Debug Files): Fix last change.  Add
7046         indexing for ``build ID'' support.
7047
7048 2007-09-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
7049
7050         * gdb.texinfo (Separate Debug Files): Included a BUILD ID description.
7051         Enlisted BUILD ID to the debug file searching example.
7052         Included a BUILD ID `.note.gnu.build-id' section description.
7053         Updated/added the debug files splitting instructions for OBJCOPY.
7054
7055 2007-08-31  Vladimir Prus  <vladimir@codesourcery.com>
7056
7057         * gdb.texinfo (Variable Objects): Adjust docs
7058         for -var-info-expression and document
7059         -var-info-path-expression.
7060
7061 2007-08-20  Jim Blandy  <jimb@codesourcery.com>
7062
7063         * gdb.texinfo (Top): Dedicate manual to the memory of Fred Fish.
7064         (title page): Include the dedication in the printed manual, as a
7065         separate page after the copyright notice.
7066
7067         * gdb.texinfo (The F Reply Packet): Avoid confusing texi2html:
7068         don't break a @var across a line.
7069
7070 2007-07-25  Maciej W. Rozycki  <macro@mips.com>
7071
7072         * Makefile.in (MAKEHTMLFLAGS): Also search the current directory
7073         for include files.
7074
7075 2007-07-12  Nick Roberts  <nickrob@snap.net.nz>
7076
7077         * gdb.texinfo (Server Prefix): New node.  Adapt from existing node
7078         in annotate.texinfo.
7079         (Command History): Link to new node.
7080
7081 2007-07-05  Markus Deuling  <deuling@de.ibm.com>
7082
7083         * gdbint.texinfo (PC_LOAD_SEGMENT): Remove description.
7084
7085 2007-07-05  Eli Zaretskii  <eliz@gnu.org>
7086
7087         * gdbint.texinfo (Target Conditionals): Fix last change.
7088
7089 2007-07-03  Markus Deuling  <deuling@de.ibm.com>
7090
7091         * gdb.texinfo: Replace following macros by their appropriate gdbarch
7092         routines:
7093         (TARGET_CHAR_SIGNED, CALL_DUMMY_LOCATION, CANNOT_FETCH_REGISTER)
7094         (CANNOT_STORE_REGISTER, GET_LONGJMP_TARGET, POINTER_TO_ADDRESS)
7095         (ADDRESS_TO_POINTER, INNER_THAN, FRAME_NUM_ARGS)
7096         (HAVE_NONSTEPPABLE_WATCHPOINT, TARGET_SHORT_BIT, TARGET_INT_BIT)
7097         (TARGET_LONG_BIT, TARGET_LONG_LONG_BIT, TARGET_FLOAT_BIT)
7098         (TARGET_DOUBLE_BIT, TARGET_LONG_DOUBLE_BIT, TARGET_PTR_BIT
7099         (TARGET_ADDR_BIT, SP_REGNUM, PC_REGNUM, PS_REGNUM, FP0_REGNUM)
7100         (STAB_REG_TO_REGNUM, ECOFF_REG_TO_REGNUM, DWARF_REG_TO_REGNUM)
7101         (SDB_REG_TO_REGNUM, DWARF2_REG_TO_REGNUM, BELIEVE_PCC_PROMOTION)
7102         (CONVERT_REGISTER_P, REGISTER_TO_VALUE, VALUE_TO_REGISTER)
7103         (POINTER_TO_ADDRESS, ADDRESS_TO_POINTER, EXTRACT_RETURN_VALUE)
7104         (STORE_RETURN_VALUE, SKIP_PROLOGUE, MEMORY_INSERT_BREAKPOINT)
7105         (BREAKPOINT_FROM_PC, MEMORY_REMOVE_BREAKPOINT, DECR_PC_AFTER_BREAK)
7106         (ADDR_BITS_REMOVE, TARGET_PRINT_INSN, SKIP_TRAMPOLINE_CODE)
7107         (IN_SOLIB_RETURN_TRAMPOLINE, NAME_OF_MALLOC, ADDRESS_CLASS_TYPE_FLAGS)
7108         (ADDRESS_CLASS_TYPE_FLAGS_TO_NAME, ADDRESS_CLASS_TYPE_FLAGS_P).
7109         (ADDRESS_CLASS_NAME_to_TYPE_FLAGS, ADJUST_BREAKPOINT_ADDRESS)
7110         (PRINT_FLOAT_INFO, PRINT_VECTOR_INFO, INTEGER_TO_ADDRESS)
7111         (SKIP_PERMANENT_BREAKPOINT, TARGET_VIRTUAL_FRAME_POINTER)
7112         (SOFTWARE_SINGLE_STEP_P)
7113
7114         (push_dummy_call, stabs_argument_has_addr, unwind_sp, unwind_pc)
7115         (print_registers_info, push_dummy_code, unwind_dummy_id): Rework
7116
7117         (REGISTER_CONVERT_TO_TYPE, END_OF_TEXT_DEFAULT, GDB_MULTI_ARCH)
7118         (GDB_TARGET_IS_HPPA, DEPRECATED_GET_SAVED_REGISTER)
7119         (SYMBOLS_CAN_START_WITH_DOLLAR, DEPRECATED_INIT_EXTRA_FRAME_INFO)
7120         (DEPRECATED_INIT_FRAME_PC, DEPRECATED_SIGTRAMP_START)
7121         (IN_SOLIB_CALL_TRAMPOLINE, NO_HIF_SUPPORT, REGISTER_CONVERTIBLE)
7122         (DEPRECATED_REGISTER_RAW_SIZE, PARM_BOUNDARY, DEPRECATED_STACK_ALIGN)
7123         (PROLOGUE_FIRSTLINE_OVERLAP, DEPRECATED_POP_FRAME, STEP_SKIPS_DELAY)
7124         (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT)
7125         (OS9K_VARIABLES_INSIDE_BLOCK, KERNEL_U_ADDR, KERNEL_U_ADDR_HPUX)
7126         (REGISTER_U_ADDR, U_REGS_OFFSET, DEBUG_PTRACE): Remove description.
7127
7128         (Converting an existing Target Architecture to Multi-arch): Remove
7129          section.
7130
7131         (gdbarch_unwind_pc, gdbarch_unwind_sp): Renew code example.
7132         (gdbarch_addr_bits_remove): Add code example.
7133
7134         * gdb.texinfo: Replace REGISTER_NAME by gdbarch_register_name.
7135
7136 2007-07-02  Daniel Jacobowitz  <dan@codesourcery.com>
7137
7138         * gdb.texinfo (Remote Configuration): Document library-info-packet.
7139         Add other missing entries.  Adjust the table size to fit.
7140         (Stop Reply Packets): Use @itemize instead of @enumerate.  Document
7141         stop reasons including the new "library" event.
7142         (General Query Packets): Adjust table widths for qSupported.  Mention
7143         qXfer:libraries:read reply to qSupported and document the new packet.
7144         (Library List Format): New section.
7145
7146 2007-07-01  Jan Kratochvil  <jan.kratochvil@redhat.com>
7147
7148         * gdb.texinfo (Attach): Fixed GDB exit inferior detachment.
7149
7150 2007-06-28  Michael Snyder  <msnyder@svkmacdonelllnx>
7151
7152         * gdbint.texinfo (Table, Tuple and List Functions) Fix typo.
7153
7154 2007-06-25  Nick Roberts  <nickrob@snap.net.nz>
7155
7156         * gdbint.texinfo (Register and Memory Data): Break sections
7157         into nodes and add a menu.
7158
7159 2007-06-21  Maciej W. Rozycki  <macro@mips.com>
7160
7161         * gdb.texinfo (Examining Memory): Document the new behaviour.
7162
7163 2007-06-21  Vladimir Prus  <vladimir@codesourcery.com>
7164
7165         * gdb.texinfo (Standard Target Features): Document
7166         m68k features.
7167
7168 2007-06-18  Daniel Jacobowitz  <dan@codesourcery.com>
7169
7170         * gdb.texinfo (General Query Packets): Document qOffsets changes.
7171
7172 2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>
7173
7174         * gdb.texinfo (Target Description Format): Add version attribute
7175         for <target>.
7176
7177 2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>
7178
7179         * gdb.texinfo (MIPS Features): Document org.gnu.gdb.mips.linux.
7180
7181 2007-06-13  Daniel Jacobowitz  <dan@codesourcery.com>
7182
7183         * gdb.texinfo (MIPS Features): New subsection.
7184
7185 2007-06-12  Ulrich Weigand  <uweigand@de.ibm.com>
7186             Markus Deuling  <deuling@de.ibm.com>
7187
7188         * gdb.texinfo (General Query Packets): Document qXfer:spu:read
7189         and qXfer:spu:write packets and mention them under qSupported.
7190
7191 2007-06-12  Ulrich Weigand  <uweigand@de.ibm.com>
7192             Markus Deuling  <deuling@de.ibm.com>
7193
7194         * gdb.texinfo (Architectures): Add new SPU section to document
7195         Cell Broadband Engine SPU architecture specific commands.
7196
7197 2007-06-09  Vladimir Prus  <vladimir@codesourcery.com>
7198
7199         * gdb.texinfo (GDB/MI Variable Objects): Editorial
7200         comments.
7201
7202 2007-06-07  Nick Roberts  <nickrob@snap.net.nz>
7203
7204         * gdb.texinfo (Emacs): Describe GDB under Emacs 22.1.
7205
7206 2007-05-29  Jim Blandy  <jimb@codesourcery.com>
7207
7208         * gdb.texinfo (Overview): Doc fix.
7209
7210 2007-05-22  Maciej W. Rozycki  <macro@mips.com>
7211
7212         * gdb.texinfo (Remote Configuration): Document "set/show
7213         remoteflow".
7214
7215 2007-05-16  Daniel Jacobowitz  <dan@codesourcery.com>
7216
7217         * gdb.texinfo (MIPS): Remove documentation for set mips
7218         saved-gpreg-size, show mips saved-gpreg-size, and set mips
7219         stack-arg-size.
7220
7221 2007-05-14  Bob Wilson  <bob.wilson@acm.org>
7222
7223         * all-cfg.texi (GDBTUI): New.
7224         * gdb.texinfo (Mode Options): Use GDBTUI variable.
7225         (TUI, TUI Overview, TUI Keys, TUI Single Key Mode, TUI Commands)
7226         (TUI Configuration): Edit to improve clarity and fix problems of
7227         both style and content.
7228
7229 2007-05-11  Ulrich Weigand  <uweigand@de.ibm.com>
7230
7231         * observer.texi (GDB Observers): New observer "new_objfile".
7232
7233 2007-05-08  Ulrich Weigand  <uweigand@de.ibm.com>
7234
7235         * gdbint.texinfo (Native Conditionals): Remove USE_PROC_FS.
7236
7237 2007-04-14  Vladimir Prus  <vladimir@codesourcery.com>
7238
7239         * gdb.texinfo (GDB/MI Variable Objects): Document
7240         frozen variables objects.
7241
7242 2007-04-13  Daniel Jacobowitz  <dan@codesourcery.com>
7243
7244         * gdb.texinfo (Memory): Reference Remote Debugging chapter.
7245         (Character Sets, Caching Data of Remote Targets): Likewise.
7246         (Targets): Delete Remote node.  Move its text...
7247         (Debugging Remote Programs): ...to here.  Delete description
7248         of the "remote" command.
7249         (Remote configuration): Delete description of "set remotedevice"
7250         and "show remotedevice".
7251         (Embedded Processors): Delete H8/300, H8/500, and SH nodes.
7252
7253 2007-04-11  Bob Wilson  <bob.wilson@acm.org>
7254
7255         * gdb.texinfo (Contributors, Continuing and Stepping)
7256         (Fortran Defaults, HPPA, TUI, TUI Commands, Configure Options)
7257         (General Query Packets, File-I/O Remote Protocol Extension)
7258         (Protocol Basics, The F Reply Packet, Write)
7259         (Protocol-specific Representation of Datatypes, Memory Transfer):
7260         Fix hyphenation, punctuation and grammar problems.
7261         (Cygwin Native): Likewise.  Also fix misuse of @pxref and use
7262         'section' instead of 'subsection' in the text.
7263         (Non-debug DLL Symbols): Avoid 'subsubsection' in the text.
7264         (i386): Remove period from section name.
7265         (Installing GDB, Requirements, Running Configure,  Separate Objdir)
7266         (Config Names, Configure Options): Use @file{configure}.
7267
7268 2007-04-11  Daniel Jacobowitz  <dan@codesourcery.com>
7269
7270         * gdbint.texinfo (Writing Tests): Mention gdb_test_multiple
7271         and tab expansion.
7272
7273 2007-04-10  Daniel Jacobowitz  <dan@codesourcery.com>
7274
7275         * gdbint.texinfo (SOM): Correct location of the SOM reader.
7276
7277 2007-04-02  Bob Wilson  <bob.wilson@acm.org>
7278
7279         * gdb.texinfo: Consistently capitalize all significant words in
7280         node names, chapter titles, section titles, and headings.  Update
7281         cross references to match.
7282         (Starting and Stopping Trace Experiment): Make node name plural.
7283         (Breakpoint related warnings): Hyphenate "Breakpoint-related".
7284
7285 2007-03-30  Pedro Alves  <pedro_alves@portugalmail.pt>
7286
7287         * gdb.texinfo (WinCE): Delete obsolete subsection.
7288
7289 2007-03-30  Daniel Jacobowitz  <dan@codesourcery.com>
7290
7291         * gdb.texinfo (M68K): Remove obsolete ROM monitors.
7292         * gdbint.texinfo (DWARF 1): Delete section and other dwarfread.c
7293         references.
7294
7295 2007-03-30  Daniel Jacobowitz  <dan@codesourcery.com>
7296
7297         * gdb.texinfo (Startup): Delete references to some alternate
7298         names for .gdbinit.
7299         (Thread): Remove LynxOS reference.
7300         (Tandem ST2000): Delete target-specific documentation.
7301         * gdbint.texinfo (Symbol Handling): Remove mention of NLM.
7302         (Target Architecture Definition): Remove mention of GDB_OSABI_NETWARE
7303         and GDB_OSABI_LYNXOS.
7304
7305 2007-03-29  Ulrich Weigand  <uweigand@de.ibm.com>
7306
7307         * gdbint.texi (Native Conditionals): Remove PTRACE_ARG3_TYPE.
7308
7309 2007-03-27  Ulrich Weigand  <uweigand@de.ibm.com>
7310
7311         * gdbint.texinfo (Target Conditionals): Remove mention of
7312         DEPRECATED_REMOTE_BREAKPOINT, DEPRECATED_BIG_REMOTE_BREAKPOINT,
7313         and DEPRECATED_LITTLE_REMOTE_BREAKPOINT.
7314
7315 2007-03-27  Brooks Moses  <brooks.moses@codesourcery.com>
7316
7317         * Makefile.in: Add "pdfdir" installation
7318         directory, PDFTEX macro, support for "install-pdf" target,
7319         and rules for making a pdf version of refcard.texi.
7320         * refcard.tex: Specify paper size for PDF output.
7321
7322 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
7323
7324         * gdb.texinfo (Omissions from Ada, Additions to Ada): Wrap long lines.
7325
7326 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
7327
7328         * gdb.texinfo (Invoking GDB): Use @value{GDBP}.
7329         (Source Path, Character Sets, Macros, Define)
7330         (GDB/MI Result Records, GDB/MI Simple Examples)
7331         (GDB/MI Program Execution, GDB/MI File Commands)
7332         (Maintenance Commands, Packets, File-I/O Overview): Use @value{GDBN}.
7333         (Bug Reporting): Use @value{GCC}.
7334
7335 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
7336
7337         * gdb.texinfo (Help): Fix formatting of examples.
7338         (Variables): Use @ifnotinfo instead of @iftex.
7339         (Non-debug DLL symbols): Use @ref instead of @pxref.
7340         (Sparclet File): Use @samp instead of quotes.
7341
7342 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
7343
7344         * gdb.texinfo (Variables, C): Update cross reference to GCC docs.
7345
7346 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
7347
7348         * gdb.texinfo (Top): Move TUI and Annotations menu entries to match
7349         the order of the nodes.
7350         (C Operators, C Constants, Debugging C): Remove extra menus.
7351         (Method Names in Commands): Do not specify next/prev/up nodes.
7352
7353 2007-03-26  Bob Wilson  <bob.wilson@acm.org>
7354
7355         * gdb.texinfo (File Options): Add missing parenthesis.
7356         (Breakpoints, Special Fortran commands, PowerPC): Fix typos.
7357
7358 2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>
7359
7360         * gdb.texinfo (Monitor commands for gdbserver): New subsection.
7361
7362 2007-02-26  Daniel Jacobowitz  <dan@codesourcery.com>
7363
7364         * gdb.texinfo (Standard Target Features): Mention
7365         case insensitivity.
7366         (ARM Features): Describe org.gnu.gdb.xscale.iwmmxt.
7367
7368 2007-02-18  Nick Roberts  <nickrob@snap.net.nz>
7369
7370         * gdb.texinfo (Top): Put Appendix A after numbered sections.
7371         (Files): Add section name to argument list for pxref.
7372         (Non-debug DLL symbols): Don't use `see' for pxref.
7373         (Embedded Processors): Fix typo.
7374         (GDB/MI Breakpoint Commands): Execution commands generate
7375         *stopped not ^done.
7376
7377 2007-02-13  Nick Roberts  <nickrob@snap.net.nz>
7378
7379         * gdb.texinfo (GDB/MI Variable Objects): Describe meanings of
7380         values for in_scope.  Mention that only root variables can be
7381         updated.
7382         (GDB/MI Development and Front Ends): Explain new values may be
7383         added to existing fields.
7384
7385 2007-02-08  Daniel Jacobowitz  <dan@codesourcery.com>
7386
7387         * gdb.texinfo (-target-disconnect): Use @smallexample.
7388         (Requirements): Add anchor for Expat.  Update description.
7389         (Target Descriptions): Mention Expat.
7390         (Target Description Format): Document new elements.  Use
7391         @smallexample.
7392         (Predefined Target Types, Standard Target Features): New sections.
7393         * gdbint.texinfo (Target Descriptions): New section.
7394
7395 2007-02-07  Daniel Jacobowitz  <dan@codesourcery.com>
7396
7397         * gdb.texinfo (Target Description Format): Add section on XInclude.
7398
7399 2006-02-03  Nick Roberts  <nickrob@snap.net.nz>
7400
7401         * gdb.texinfo (GDB/MI Miscellaneous Commands): Describe the new
7402         command -enable-timings.
7403
7404 2007-02-02  Markus Deuling  <deuling@de.ibm.com>  (tiny change)
7405
7406         * gdbint.texinfo (Operation System ABI Variant Handling): Update
7407         descriptions for new/deleted elements in gdb_osabi.  Add missing
7408         description for function generic_elf_osabi_sniff_abi_tag_sections.
7409
7410 2007-01-29  Joel Brobecker  <brobecker@adacore.com>
7411
7412         * gdb.texinfo (Maintenance Commands): Add documentation for
7413         the new "maint print target-stack" command.
7414
7415 2007-01-26  Jan Kratochvil <jan.kratochvil@redhat.com>
7416             Eli Zaretskii  <eliz@gnu.org>
7417
7418         * gdb.texinfo: Describe CHAR array vs. string identification rules.
7419
7420 2007-01-26  Eli Zaretskii  <eliz@gnu.org>
7421
7422         * gdb.texinfo (Compilation, Files, Bootstrapping, Bug Reporting):
7423         Use @value{NGCC} instead of @value{GCC}.
7424
7425 2007-01-20  Ralf Wildenhues  <Ralf.Wildenhues@gmx.de>  (tiny change)
7426
7427         * agentexpr.texi: Fix typos.
7428         * annotate.texinfo: Likewise.
7429         * gdb.texinfo: Likewise.
7430         * gdbint.texinfo: Likewise.
7431         * observer.texi: Likewise.
7432         * stabs.texinfo: Likewise.
7433
7434 2007-01-20  Markus Deuling  <deuling@de.ibm.com>  (tiny change)
7435
7436         * gdbint.texinfo (Support Libraries): Remove mmalloc
7437         entry.  Describe readline library.
7438
7439 2007-01-09  Daniel Jacobowitz  <dan@codesourcery.com>
7440
7441         * gdb.texinfo (Target Descriptions): New section.
7442         (General Query Packets): Add QPassSignals anchor.  Mention
7443         qXfer:features:read under qSupported.  Expand mentions of
7444         qXfer:memory-map:read and QPassSignals.  Document
7445         qXfer:features:read.
7446
7447 2007-01-08  Daniel Jacobowitz  <dan@codesourcery.com>
7448
7449         * gdb.texinfo (Commands to specify files): Describe
7450         "set sysroot" and "show sysroot".
7451         (Using the `gdbserver' program): Lowercase argument
7452         to @var.  Expand description of setting up GDB on the
7453         host.
7454
7455 2007-01-05  Joel Brobecker  <brobecker@adacore.com>
7456
7457         * gdb.texinfo (Set Catchpoints): Add documentation for the new
7458         catch exception, catch exception unhandled, and catch assert
7459         commands.
7460
7461 2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>
7462
7463         * gdb.texinfo (Debugging Output): Document "set debug xml"
7464         and "show debug xml".
7465
7466 2007-01-04  Daniel Jacobowitz  <dan@codesourcery.com>
7467
7468         * gdbint.texinfo (Compiler Warnings): Update for -Wall use.
7469
7470 2007-01-01  Joel Brobecker  <brobecker@adacore.com>
7471
7472         * gdbint.texinfo (Start of New Year Procedure): Add missing item.
7473
7474 2006-12-08  Vladimir Prus  <vladimir@codesourcery.com>
7475
7476         * gdb.texinfo (GDB/MI Variable Objects): Wrap historical
7477         note in @ignore, to be removed later if nobody complains.
7478
7479 2006-12-04  Nick Roberts  <nickrob@snap.net.nz>
7480
7481         * gdb.texinfo (GDB/MI Variable Objects): Describe -c option
7482         of -var-delete.
7483
7484 2006-11-22  Vladimir Prus  <vladimir@codesourcery.com>
7485
7486         * gdb.texinfo (Setting breakpoints): Document
7487         automatic software/hardware breakpoint usage and
7488         the "set breakpoint auto-hw" command.
7489
7490 2006-11-21  Vladimir Prus  <vladimir@codesourcery.com>
7491
7492         * gdb.texinfo (Memory Access Checking): New.
7493
7494 2006-11-16  Daniel Jacobowitz  <dan@codesourcery.com>
7495
7496         * gdb.texinfo (Remote configuration): Mention
7497         "pass-signals-packet".
7498         (General Query Packets): Document QPassSignals.  Fix
7499         a typo.
7500
7501 2006-11-14  Maxim Grigoriev  <maxim@tensilica.com>
7502
7503         * gdb.texinfo (Contributors): Add contributors of Xtensa port.
7504
7505 2006-11-14  Daniel Jacobowitz  <dan@codesourcery.com>
7506
7507         * gdb.texinfo (Remote configuration): Rewrite documentation for
7508         packet configuration commands.
7509         (OS Information): Adjust reference to qXfer:auxv:read.
7510         (General Query Packets): Remove references to read-aux-vector-packet
7511         and set remote get-thread-local-storage-address.
7512
7513 2006-11-10  Daniel Jacobowitz  <dan@codesourcery.com>
7514
7515         * gdbint.texinfo (Target Architecture Definition): Add new
7516         Initializing a New Architecture section.
7517
7518 2006-10-31  David Taylor  <dtaylor@emc.com>
7519
7520         * stabs.texinfo (Macro define and undefine): New node describing
7521         stabs for #define and #undef.
7522
7523 2006-10-27  Andreas Schwab  <schwab@suse.de>
7524
7525         * gdb.texinfo (Processes): Rename "detach-fork" to "detach fork".
7526
7527 2006-10-21  Eli Zaretskii  <eliz@gnu.org>
7528
7529         * gdb.texinfo (Breakpoints, Set Watchpoints): Elaborate and
7530         clarify on the possible meanings of ``expression'' watched by
7531         watchpoints.  Add indexing.
7532         (Prompting, Errors, Invalidation, Annotations for Running)
7533         (Source Annotations): Fix index entries by adding "annotation" to
7534         them, to discriminate from index entries that point to the more
7535         general topic descriptions.
7536
7537 2006-10-17  Daniel Jacobowitz  <dan@codesourcery.com>
7538
7539         * gdbint.texinfo (Target Vector Definition): Move most
7540         content into Existing Targets.  Add a menu.
7541         (Existing Targets): New section, moved from Target Vector
7542         Definition.  Use @subsection.
7543         (Managing Execution State): New section.
7544
7545 2006-10-16  Bob Wilson  <bob.wilson@acm.org>
7546
7547         * gdb.texinfo (ST2000): Use Ctrl- instead of C-.
7548
7549 2006-10-15  Eli Zaretskii  <eliz@gnu.org>
7550
7551         * gdb.texinfo (Sample Session, Invocation, Quitting GDB)
7552         (Command Syntax, Signals, Backtrace, Connecting)
7553         (Remote configuration, Renesas Boards, Console I/O): Fix last
7554         change: use Ctrl- instead of C-, except wrt Emacs.
7555         (File-I/O Examples): Put Ctrl-c in @kbd.
7556         (Cygwin Native, File-I/O Overview, The Ctrl-C message)
7557         (Console I/O): Use @samp with Ctrl-.
7558         (Signals, Set Breaks, Set Watchpoints): Document optional
7559         arguments to `info signals'  `handle', `info breakpoints', and
7560         `info watchpoints'.
7561
7562 2006-10-14  Eli Zaretskii  <eliz@gnu.org>
7563
7564         * gdb.texinfo (Backtrace): Fix last change.
7565
7566 2006-10-14  Nick Roberts  <nickrob@snap.net.nz>
7567
7568         * gdb.texinfo (Backtrace): Order correctly and add other cases.
7569
7570 2006-10-10  Bob Wilson  <bob.wilson@acm.org>
7571
7572         * gdb.texinfo (Command Syntax, Connecting, Remote configuration)
7573         (Renesas Boards, ST2000, TUI Keys, TUI Single Key Mode)
7574         (TUI Commands, Emacs, Console I/O): Fix @key and @kbd usage.
7575
7576 2006-09-21  Vladimir Prus  <vladimir@codesourcery.com>
7577             Daniel Jacobowitz  <dan@codesourcery.com>
7578
7579         * gdb.texinfo (Packets): Document vFlashErase,
7580         vFlashWrite and vFlashDone packets.
7581         (General Query Packets): Document qXfer:memory-map:read.
7582         Add a new feature for qXfer:memory-map:read.
7583         (Memory map format): New section.
7584         (Target Commands): Mention that gdb can write flash.
7585
7586 2006-09-21  Vladimir Prus  <vladimir@codesourcery.com>
7587             Daniel Jacobowitz  <dan@codesourcery.com>
7588
7589         * gdb.texinfo (Memory Region Attributes): Mention target-supplied
7590         memory regions and "mem auto".
7591
7592 2006-09-21  Nathan Sidwell  <nathan@codesourcery.com>
7593
7594         * gdbint.texinfo (Array Containers): New section.
7595
7596 2006-09-17  Vladimir Prus  <vladimir@codesourcery.com>
7597
7598         * gdb.texinfo (GDB/MI Stack Manipulation): Mention that
7599         -stack-list-arguments HIGH_FRAME argument can be larger then the
7600         actual number of frames.
7601
7602 2006-09-07  Vladimir Prus  <vladimir@codesourcery.com>
7603
7604         * gdb.texinfo (GDB/MI Stack Manipulation): Mention that
7605         -stack-list-locals HIGH_FRAME argument can be larger then the
7606         actual number of frames.
7607
7608 2006-09-02  Bob Wilson  <bob.wilson@acm.org>
7609
7610         * gdb.texinfo (Packets, Stop Reply Packets, General Query Packets,
7611         Register Packet Format, Tracepoint Packets): Fix spelling errors.
7612
7613 2006-09-02  Eli Zaretskii  <eliz@gnu.org>
7614
7615         * gdbint.texinfo (Overall Structure): New section "Source Tree
7616         Structure".
7617
7618 2006-08-17  Jim Blandy  <jimb@codesourcery.com>
7619
7620         * gdb.texinfo (Stop Reply Packets): Note similarity of 'S' and 'T'
7621         responses.
7622
7623 2006-08-08  Joel Brobecker  <brobecker@adacore.com>
7624
7625         * gdb.texinfo (Source Path): Add documentation for new
7626         substitute-path commands.
7627
7628 2006-08-08  Daniel Jacobowitz  <dan@codesourcery.com>
7629
7630         * gdb.texinfo (Installing GDB): Update menu.  Move text to...
7631         (Running Configure): ...here.
7632         (Requirements): New node.  Mention expat.
7633
7634 2006-08-08  Vladimir Prus  <vladimir@codesourcery.com>
7635
7636         * gdb.texinfo (Target Commands): Remove
7637         'set download-write-size' and 'show download-write-size'.
7638
7639 2006-08-01  Daniel Jacobowitz  <dan@codesourcery.com>
7640
7641         * stabs.texinfo (Member Type Descriptor): Correct example for
7642         pointer to member types.
7643
7644 2006-07-21  Andrew Stubbs  <andrew.stubbs@st.com>
7645
7646         * gdb.texinfo (Optional warnings and messages): Add
7647         'set/show trace-commands'.
7648         (Command files): Add '-v' to source command.
7649
7650 2006-07-12  Daniel Jacobowitz  <dan@codesourcery.com>
7651
7652         * gdb.texinfo (OS Information): Update qPart reference to
7653         qXfer.
7654         (Remote configuration): Likewise.
7655         (Overview): Move @cindex to the start of a paragraph.  Talk
7656         about binary data encoding.
7657         (Packets): Refer to the overview for the details of the X
7658         packet encoding.
7659         (General Query Packets): Remove qPart description.  Add qXfer
7660         description.  Add an anchor to qSupported.  Correct feature
7661         table title.  Add a new feature for qXfer:auxv:read.
7662         (Interrupts): Add a missing parenthesis.
7663
7664 2006-07-05  Daniel Jacobowitz  <dan@codesourcery.com>
7665
7666         * gdb.texinfo (KOD): Remove node.
7667         (GDB/MI Kod Commands): Remove commented out node.
7668
7669 2006-07-01  Eli Zaretskii  <eliz@gnu.org>
7670
7671         * gdb.texinfo (GDB/MI Output Syntax, GDB/MI Simple Examples)
7672         (GDB/MI Breakpoint Commands, GDB/MI Program Context)
7673         (GDB/MI Thread Commands, GDB/MI Program Execution)
7674         (GDB/MI Stack Manipulation, GDB/MI Variable Objects)
7675         (GDB/MI Data Manipulation, GDB/MI Symbol Query)
7676         (GDB/MI File Commands, GDB/MI Target Manipulation)
7677         (GDB/MI Miscellaneous Commands): Change (@value{GDBP})->(gdb),
7678         since the MI prompt is hard-wired into the code.
7679
7680 2006-07-01  Nick Roberts  <nickrob@snap.net.nz>
7681
7682         * gdb.texinfo (GDB/MI Compatibility with CLI): Qualify more carefully.
7683         (GDB/MI Simple Examples): Use @subheading for "A Bad Command".
7684         (GDB/MI Data Manipulation): Remove description of unimplemented
7685         display related commands as variable objects perform this function
7686         and are superior: -display-delete, -display-disable,
7687         -display-enable, -display-insert and -display-list.  Move
7688         -environment-cd, -environment-directory, -environment-path
7689         and -environment-pwd to "Program Context".
7690         (GDB/MI Program Control): Rename to "Program Execution".  Move
7691         -exec-arguments -exec-abort to...
7692         (GDB/MI Program Context): ...here.  New node split from "Data
7693          Manipulation".
7694
7695 2006-06-21  Daniel Jacobowitz  <dan@codesourcery.com>
7696
7697         * gdb.texinfo (Remote configuration): Document set / show
7698         remote supported-packets.
7699         (General Query Packets): Document qSupported packet.
7700
7701 2006-06-10  Sandra Loosemore <sandra@codesourcery.com>
7702
7703         * gdb.texinfo (File-I/O overview): Copy edit for grammar, spelling,
7704         and font markup.
7705         (Protocol basics): Likewise.
7706         (The F request packet): Likewise.
7707         (The F reply packet): Likewise.
7708         (Memory transfer): Move this node to be a subsubsection of
7709         "Protocol specific representation of datatypes".
7710         (The Ctrl-C message): More copy editing.
7711         (Console I/O): Likewise.
7712         (The isatty call): Delete this node, and merge its content into
7713         the "isatty" node.  Fixed references elsewhere.
7714         (The system call): Delete this node, and merge its content into
7715         the "system" node.  Fixed references elsewhere.
7716         (open): Reformat to use @table, and add appropriate font markup.
7717         (close): Likewise.
7718         (read): Likewise.
7719         (write): Likewise.
7720         (lseek): Likewise.
7721         (rename): Likewise.
7722         (unlink): Likewise.
7723         (stat/fstat): Likewise.
7724         (gettimeofday): Likewise.
7725         (isatty): Likewise.
7726         (system): Likewise, plus minor changes to fix confusing wording.
7727         (Integral datatypes): Fix font markup.
7728         (Pointer values): Likewise.
7729         (struct stat): Fix markup to use @table, plus minor copy editing.
7730         (struct timeval): Fix font markup, plus minor copy editing.
7731         (Constants): Minor copy editing.
7732         (Errno values): Add font markup.
7733         (File-I/O Examples): Likewise.
7734
7735 2006-06-10  Nick Roberts  <nickrob@snap.net.nz>
7736
7737         * gdb.texinfo (GDB/MI): Remove duplicate acknowledgements.
7738         (GDB/MI Simple Examples): Move node up one level.  Use real
7739         examples.
7740         (GDB/MI Compatibility with CLI): Update.
7741         (GDB/MI Result Records): Add "connected" and "exit" result
7742         classes.
7743         (GDB/MI Stream Records): Clarify target output.
7744         (GDB/MI Command Description Format): Modify example description.
7745         (GDB/MI Breakpoint Table Commands): Rename to...
7746         (GDB/MI Breakpoint Commands): ...this
7747         (GDB/MI Breakpoint Commands): Add optional thread field.
7748         (GDB/MI Program Control): Add an introduction.  Move "Program
7749         termination" examples into exec-run description.
7750         (GDB/MI File Commands): Mention similar CLI commands.
7751         (GDB/MI Miscellaneous Commands): Move to end.  Mention "show version"
7752         is similar to "-gdb-version".
7753
7754 2006-06-09  Eli Zaretskii  <eliz@gnu.org>
7755
7756         * gdb.texinfo (Symbols): Fix "(gdb)"=>"(@value{GDBP})".
7757
7758 2006-06-02  Nick Roberts  <nickrob@snap.net.nz>
7759
7760         * gdb.texinfo (GDB/MI Development and Front Ends): Use
7761         sourceware.org for mailing lists.
7762         (GDB/MI File Commands): New node split from Program Control.
7763
7764 2006-06-01  Nick Roberts  <nickrob@snap.net.nz>
7765
7766         * gdb.texinfo (GDB/MI Development and Front Ends): New node.
7767
7768 2006-05-22  Eli Zaretskii  <eliz@gnu.org>
7769
7770         * gdb.texinfo (Cygwin Native): Fix last change.
7771
7772 2006-05-22  Christopher Faylor  <cgf@timesys.com>
7773
7774         * gdb.texinfo (Cygwin Native): Document set/show cygwin-exceptions.
7775
7776 2006-05-15  Nick Roberts  <nickrob@snap.net.nz>
7777
7778         * gdbint.texinfo (Algorithms): Correct spelling and punctuation.
7779         (Releasing GDB, Testsuite): Remove details for including DejaGnu.
7780
7781 2006-05-14  Daniel Jacobowitz  <dan@codesourcery.com>
7782
7783         * gdb.texinfo (General Query Packets): Recommend not starting
7784         new packets with qC and clarify.
7785
7786 2006-05-13  Gaius Mulley  <gaius@glam.ac.uk>
7787
7788         * gdb.texinfo (M2 Types): New section.
7789
7790 2006-05-10  Daniel Jacobowitz  <dan@codesourcery.com>
7791
7792         * agentexpr.texi: Add a copyright and license notice.
7793         * observer.texi: Likewise, with GPL clause for function prototypes.
7794         Remove trailing whitespace.
7795
7796 2006-05-05  Jim Blandy  <jimb@codesourcery.com>
7797
7798         * gdb.texinfo (General Query Packets): Document conventions for
7799         terminating packet names, and their violations.
7800
7801 2006-05-05  Daniel Jacobowitz  <dan@codesourcery.com>
7802
7803         * Makefile.in (GDB_DOC_SOURCE_INCLUDES): Update for readline 5.1.
7804         * gdb.texinfo: Likewise.
7805
7806 2006-05-05  Daniel Jacobowitz  <dan@codesourcery.com>
7807
7808         * gdb.texinfo (Remote Configuration): Remove "set remotedebug"
7809         and "show remotedebug".
7810         (Debugging Output): Add additional index entries.
7811
7812 2006-04-27  Michael Snyder  <msnyder@redhat.com>
7813
7814         * gdb.texinfo (delete-fork): Command renamed to "delete fork".
7815
7816 2006-04-22  Andrew Cagney  <cagney@redhat.com>
7817
7818         * gdb.texinfo (Contributors): Credit frame unwinder contributors.
7819         * gdbint.texinfo (Algorithms): Fix errors in frame documentation.
7820
7821 2006-04-18  Daniel Jacobowitz  <dan@codesourcery.com>
7822
7823         * gdbint.texinfo (x86 Watchpoints, Target Conditionals): Update insert
7824         and remove breakpoint prototypes.
7825         (Watchpoints): Move description of target_insert_hw_breakpoint and
7826         target_remove_hw_breakpoint ...
7827         (Breakpoints): ... to here.  Document target_insert_breakpoint and
7828         target_remove_breakpoint.
7829
7830 2006-04-17  Jim Blandy  <jimb@codesourcery.com>
7831
7832         * gdb.texinfo (Packets): Note that 'addr' arguments to s, S, c,
7833         and C packets are optional.
7834
7835 2006-04-14  Frederic Riss  <frederic.riss@st.com>
7836
7837         * gdb.texinfo (Specifying source directories): Update the description
7838         of the source file search to reflect the fact that the source path
7839         always contains at least $cdir and $cwd.
7840
7841 2006-03-31  Michael Snyder  <msnyder@redhat.com>
7842
7843         * gdb.texinfo: Update copyright dates.
7844
7845 2006-03-31  Eli Zaretskii  <eliz@gnu.org>
7846
7847         * gdb.texinfo (Overview): Add an index entry to "empty response".
7848
7849 2006-03-28  Jim Blandy  <jimb@codesourcery.com>
7850
7851         * gdbint.texinfo (Prologue Analysis): New section.
7852
7853 2006-03-07  Jim Blandy  <jimb@red-bean.com>
7854
7855         * gdb.texinfo (Connecting): Document 'target remote pipe'.
7856
7857         * gdb.texinfo (Target Commands): Update text describing how to
7858         specify a target.  Refer to the detailed section on remote
7859         debugging, not the brief mention.
7860
7861         * gdb.texinfo (Connecting): Organize the different 'target remote'
7862         connection methods into a table.  Add a 'target remote' index
7863         entry. (!!!)
7864
7865 2006-02-17  Fred Fish  <fnf@specifix.com>
7866
7867         * gdb.texinfo (Symbols): Update descriptions of 'whatis' and
7868         'ptype' commands to reflect the fact that the only significant
7869         difference between them is that ptype prints the complete type
7870         description instead of just the name.
7871
7872 2006-02-13  Wu Zhou  <woodzltc@cn.ibm.com>
7873
7874         * gdbint.texinfo (Watchpoints): Delete
7875         TARGET_REGION_SIZE_OK_FOR_HW_WATCHPOINT.
7876
7877 2006-02-10  Nick Roberts  <nickrob@snap.net.nz>
7878
7879         * gdb.texinfo (GDB/MI Breakpoint Table Commands): Add fullname and
7880         times fields where needed.  Fix typos.  Update general form given
7881         for output of -break-insert.
7882         (GDB/MI): Abbreviate some unnecessarily long fullnames.
7883
7884 2006-02-06  Daniel Jacobowitz  <dan@codesourcery.com>
7885
7886         * gdbint.texinfo (Symbol Handling): Add a section
7887         on memory management.
7888
7889 2006-02-06  Vladimir Prus  <ghost@cs.msu.su>
7890
7891         * gdb.texinfo (Breakpoint table commands): Document the fullname
7892         field in -break-list output.
7893
7894 2006-02-03  Eli Zaretskii  <eliz@gnu.org>
7895
7896         * gdb.texinfo (Cygwin Native): Fix typos.  Clarify the types of
7897         debugging information produced by the various "set debug..."
7898         options.
7899
7900 2006-02-01  Daniel Jacobowitz  <dan@codesourcery.com>
7901
7902         * gdb.texinfo (Files): Remove obsolete bits from the description
7903         of "symbol-file".
7904
7905 2006-01-25  Jim Blandy  <jimb@redhat.com>
7906
7907         * gdbint.texinfo (Testsuite): Explain how to run selected tests.
7908
7909 2006-01-24  Jim Blandy  <jimb@redhat.com>
7910
7911         * gdbint.texinfo (Frames): Document the basics of GDB's register
7912         unwinding model, and explain the existence of the "sentinel" frame.
7913
7914 2006-01-23  Andrew Stubbs  <andrew.stubbs@st.com>
7915
7916         * gdb.texinfo (Choosing files): Mention that -directory is used
7917         for script files.
7918         (Specifying source directories): Likewise.
7919         (Command files): Explain how script files are found.
7920
7921 2006-01-21  Eli Zaretskii  <eliz@gnu.org>
7922
7923         * gdb.texinfo (Backtrace): Describe how to get backtrace of all
7924         the threads in a multi-threaded program.
7925         (Threads): The threadno argument of "thread apply" can be a range
7926         of numbers.
7927
7928 2006-01-18  Jim Blandy  <jimb@redhat.com>
7929
7930         * gdbint.texinfo (Coding): Add entry for -Wno-pointer-sign to list
7931         of warning flags.
7932
7933 2006-01-13  Eli Zaretskii  <eliz@gnu.org>
7934
7935         * gdb.texinfo (Sequences): Improve menu annotations.
7936         (Define): Add index entries for arguments of user-defined
7937         commands.  Move the description of flow-control commands...
7938         (Command Files): ...to here.  Document loop_break and
7939         loop_continue.
7940         (Define, Command Files): Document `end' and add index entries for
7941         it.
7942
7943 2006-01-04  Michael Snyder  <msnyder@redhat.com>
7944
7945         * gdb.texinfo: Add documentation for linux-fork.
7946         * gdbint.texinfo: Add internal documentation for checkpoints.
7947
7948 2006-01-02  Paul N. Hilfinger  <hilfinger@gnat.com>
7949
7950         * gdb.texinfo (Omissions from Ada): Document that there is now
7951         limited aggregate support.
7952
7953 2005-12-28  Eli Zaretskii  <eliz@gnu.org>
7954
7955         * gdb.texinfo (Registers): Describe how to refer to SSE and MMX
7956         registers and the likes.
7957
7958 2005-12-24  Eli Zaretskii  <eliz@gnu.org>
7959
7960         * gdb.texinfo (Target Commands, Bug Reporting, File Options)
7961         (Symbols): Fix usage of "e.g.".
7962         (Memory Region Attributes): Fix usage of "etc."
7963
7964         * gdbint.texinfo (libgdb, Symbol Handling, Native Debugging)
7965         (Coding): Fix usage of "e.g.".
7966
7967 2005-12-23  Eli Zaretskii  <eliz@gnu.org>
7968
7969         * stabs.texinfo:
7970         * refcard.tex:
7971         * gpl.texi:
7972         * gdbint.texinfo:
7973         * gdb.texinfo:
7974         * gdb-cfg.texi:
7975         * fdl.texi:
7976         * annotate.texinfo:
7977         * all-cfg.texi:
7978         * Makefile.in: Add (C) after Copyright.  Update the FSF
7979         address.
7980
7981 2005-12-03  Eli Zaretskii  <eliz@gnu.org>
7982
7983         * gdb.texinfo (Connecting): Explain that `monitor' is a way to
7984         extend GDB with commands for external monitor.
7985
7986 2005-12-02  Andrew Stubbs  <andrew.stubbs@st.com>
7987
7988         * gdb.texinfo (Convenience variables): Add init-if-undefined command.
7989
7990 2005-11-25  Joel Brobecker  <brobecker@adacore.com>
7991
7992         * gdbint.texinfo (Start of New Year Procedure): New chapter.
7993
7994 2005-11-21  Jim Blandy  <jimb@redhat.com>
7995
7996         * gdb.texinfo (Tracepoint Packets): Document restrictions on
7997         placement of 'R' actions in tracepoint action packets; document
7998         dependence of 'X' and 'M' actions on a preceding 'R' action for
7999         their registers.
8000
8001 2005-11-19  Jim Blandy  <jimb@redhat.com>
8002
8003         * gdb.texinfo (Tracepoint Packets): New node.
8004         (General Query Packets): Add entries for the tracepoint packets,
8005         referring to the "Tracepoint Packets" node.
8006         (Tracepoints): Add reference to "Tracepoint Packets".
8007
8008 2005-11-18  Kevin Buettner  <kevinb@redhat.com>
8009
8010         * gdb.texinfo (set remotebreak): Add anchor.
8011         (X packet): Likewise.
8012         (Remote Protocol): Add new section `Interrupts' and new index
8013         entry `interrupts (remote protocol)'.
8014
8015 2005-11-18  Jim Blandy  <jimb@redhat.com>
8016
8017         * gdb.texinfo (Packets): Move information out of 'q' and 'Q'
8018         entries into the General Query Packets section.  Add a
8019         cross-reference to that section.  Drop description of replies, as
8020         these are covered in the descriptions of each packet.
8021         (General Query Packets): Add introductory text.  Explain naming
8022         conventions, and how the end of a name is recognized.
8023
8024 2005-11-17  Kevin Buettner  <kevinb@redhat.com>
8025
8026         * gdb.texinfo (Remote configuration): Fix typo in description of
8027         "set remotebreak" command.
8028
8029 2005-11-16  Jim Blandy  <jimb@redhat.com>
8030
8031         * gdb.texinfo (Packets, Stop Reply Packets)
8032         (General Query Packets): Various formatting cleanups.
8033         - Use @samp for packet contents.
8034         - Drop summaries from packet @item lines; the same information appears
8035           immediately below in the description.
8036         - Delete paragraph breaks after packet @item commands, so that the
8037           description appears directly to the right of the packet prototype
8038           in the printed manual, if it fits.
8039         - Place spaces in packet prototypes between @vars and non-@var
8040           letters, and explain that they're just for formatting.
8041         - Use @dots{} instead of '...'.
8042         - Fix uses of @code where @var was needed.
8043         - Replace "deprecated" markers with English text spelling out the
8044           packet's status and the preferred alternatives.
8045         - Remove "(reserved)" markers on 'A' and 'I' packets; it's unclear
8046           what this ever meant.
8047         - Remove "(draft)" markers on 'i' packets; nobody has commented on
8048           this for a long time.
8049         - Remove "(draft)" markers on 'z' and 'Z' packets; these have been
8050           implemented several times, and have been in use for years.
8051
8052 2005-11-15  Jim Blandy  <jimb@redhat.com>
8053
8054         * gdb.texinfo (Packets): Add index entries for 'm' packet
8055         disclaimers.
8056
8057         * gdb.texinfo (Packets): Clarify lack of restrictions on behavior
8058         of stub when processing an 'm' packet.
8059
8060         * gdb.texinfo (Packets): Mention that packets beginning with
8061         letters are reserved once, at the top, instead of actually listing
8062         them all and saying "reserved".
8063
8064 2005-11-15  Andrew Stubbs  <andrew.stubbs@st.com>
8065
8066         * gdb.texinfo (User-defined commands): Add $argc. Add missing 'end'.
8067         Change @var{$arg0 to @code{$arg0.
8068
8069 2005-11-14  Wu Zhou  <woodzltc@cn.ibm.com>
8070
8071         * gdb.texinfo (Fortran): Add some words about Fortran debugging.
8072
8073 2005-11-12  Jim Blandy  <jimb@redhat.com>
8074
8075         * gdb.texinfo (General Query Packets): Put packets in alphabetical
8076         order.  Remove extraneous 'z'.
8077
8078 2005-11-07  Andrew Stubbs  <andrew.stubbs@st.com>
8079
8080         * gdb.texinfo (Choosing files): Add --eval-command.
8081
8082 2005-11-04  Andrew Stubbs  <andrew.stubbs@st.com>
8083
8084         * gdb.texinfo (Choosing modes): Add --return-child-result.
8085
8086
8087 2005-11-01  Andrew Stubbs  <andrew.stubbs@st.com>
8088
8089         * gdb.texinfo (Choosing modes): Add --batch-silent.
8090
8091 2005-10-28  Eli Zaretskii  <eliz@gnu.org>
8092
8093         * gdb.texinfo (GDB/MI Variable Objects): Fix @pxref usage under
8094         "The -var-update Command".
8095
8096 2005-10-03  Joel Brobecker  <brobecker@adacore.com>
8097
8098         * gdb.texinfo (Print Settings): Add documentation for set/show
8099         print array-indexes.
8100
8101 2005-09-17  Daniel Jacobowitz  <dan@codesourcery.com>
8102
8103         * gdb.texinfo (Contributors): Thank Andrew Cagney for releases
8104         6.2 and 6.3.
8105
8106 2005-08-27  Eli Zaretskii  <eliz@gnu.org>
8107
8108         * gdb.texinfo (File Options): Don't document --mapped, it's gone
8109         since 19-Jan-2004.
8110         (Files): Likewise.
8111         (Variables, Symbols): Document the "<incomplete type>" message and
8112         its reasons.
8113
8114 2005-08-01  Fred Fish  <fnf@specifix.com>
8115
8116         * gdb.texinfo (SETUP_ARBITRARY_FRAME): Remove obsolete reference.
8117
8118 2005-07-15  Nick Roberts  <nickrob@snap.net.nz>
8119
8120         * gdb.texinfo (GDB/MI Variable Objects): Describe print-values
8121         option for -var-list-children and -var-update.
8122         (GDB/MI Stack Manipulation): Simplify description of
8123         print-values option for -stack-list-locals.
8124         (GDB/MI Command Description Format): Clarify.
8125         (Mode Options): Spelling of superseded.
8126
8127 2005-07-12  Bob Rossi  <bob@brasko.net>
8128
8129         * gdb.texinfo (GDB/MI Miscellaneous Commands): Fix -inferior-tty-show
8130         corresponding GDB command comment.
8131
8132 2005-07-06  Bob Rossi  <bob@brasko.net>
8133
8134         * gdb.texinfo (GDB/MI Miscellaneous Commands): Add -inferior-tty-set
8135         and -inferior-tty-show.
8136         (Input/Output): Document "set/show inferior-tty" and tty alias.
8137
8138 2005-07-02  Nathan J. Williams  <nathanw@wasabisystems.com>
8139
8140         * gdb.texinfo (Packets): Change description of 'D' packet to note
8141         that GDB does wait for a response.
8142
8143 2005-06-22  Nick Roberts  <nickrob@snap.net.nz>
8144
8145         * gdb.texinfo (History) Rename "Command History".
8146         (Command History): Move node "Server Prefix" from section on
8147         Annotations here.
8148
8149 2005-06-19  Nick Roberts  <nickrob@snap.net.nz>
8150
8151         * gdb.texinfo (GDB/MI Stack Manipulation):
8152         Re-instate -stack-info-frame with example.  Say that it gets
8153         info on selected frame, not current frame.
8154
8155 2005-06-18  Eli Zaretskii  <eliz@gnu.org>
8156
8157         * gdb.texinfo (Server): Clarify that `file' should be used before
8158         connecting to the server.
8159         (Files): Add an xref to the above description.
8160         (Output Formats): More detailed description of the `c' format.
8161         (Memory): List explicitly all the formats supported by `x'.
8162         (Threads): Add an @cindex entry for "thread apply".
8163         (Files): Document the possibility of loading unlinked object
8164         files.  Add more indexing for solib-absolute-prefix and
8165         --with-sysroot.
8166         (Machine Code): Document possible problems with locations in
8167         shared libraries.
8168         (Backtrace): Document that free-standing environments do not need
8169         to have a `main' function.
8170
8171 2005-06-18  Nick Roberts  <nickrob@snap.net.nz>
8172
8173         * gdb.texinfo (GDB/MI Stack Manipulation): Remove reference to
8174         -stack-info-frame.
8175
8176 2005-06-07  Andrew Cagney  <cagney@gnu.org>
8177
8178         * gdb.texinfo (Contributors): Note the original multi-arch
8179         contributors.
8180
8181 2005-06-03  Eli Zaretskii  <eliz@gnu.org>
8182
8183         * gdb.texinfo (Registers): Add index entries for the standard
8184         registers.
8185         (Frames): Add cross-reference from frame pointer description to
8186         the Registers node.
8187         (Annotations Overview): Fix the reference to GDB name.
8188
8189 2005-06-01  Eli Zaretskii  <eliz@gnu.org>
8190
8191         * gdb.texinfo (Set Watchpoints): Remove @vindex entry for
8192         can-use-hw-watchpoints.
8193
8194 2005-05-28  Bob Rossi  <bob@brasko.net>
8195
8196         * gdb.texinfo (GDB/MI Out-of-band Records): Add bullet enumerating
8197         the possible reasons why an exec async record would be returned to FE.
8198
8199 2005-05-26  Andrew Cagney  <cagney@gnu.org>
8200
8201         * gdb.texinfo: Note that Elena Zannoni, Fernando Nasser, and
8202         Andrew Cagney implemented the original GDB/MI.
8203
8204 2005-05-23  Orjan Friberg  <orjanf@axis.com>
8205
8206         * gdb.texinfo (CRIS): Update the cris-version and cris-dwarf2-cfi
8207         documentation.  Add documentation for cris-mode.
8208
8209 2005-05-20  Eli Zaretskii  <eliz@gnu.org>
8210
8211         * gdb.texinfo (Numbers): Explain the example and make the wording
8212         more acurate.
8213
8214 2005-05-17  Daniel Jacobowitz  <dan@codesourcery.com>
8215             Dennis Brueni  <dennis@slickedit.com>
8216
8217         * gdb.texinfo (GDB/MI Breakpoint Table Commands)
8218         (GDB/MI Data Manipulation, GDB/MI Program Control)
8219         (GDB/MI Stack Manipulation): Update examples to include the fullname
8220         attribute in stack frames.
8221
8222 2005-05-12  Eli Zaretskii  <eliz@gnu.org>
8223
8224         * gdb.texinfo (Startup): Fix last change.  Treat gdb.ini like we
8225         do with other non-standard names of init files.
8226
8227 2005-05-11  Eli Zaretskii  <eliz@gnu.org>
8228
8229         * gdb.texinfo (Command Files): Move the description of the startup
8230         from here...
8231         (Startup): ...to this new subsection of the Invocation chapter.
8232         Rearrange the description of init files more logically and add a
8233         cross-reference to "Command Files".  Document the special gdbinit
8234         name for CISCO 68k.  Expand the description of what GDB does
8235         during startup.
8236         (History): Add index entry for HISTSIZE.
8237
8238 2005-05-02  Mark Kettenis  <kettenis@gnu.org>
8239
8240         * gdb.texinfo (Files): Remove documentation for auto-solib-limit.
8241
8242 2005-05-02  Eli Zaretskii  <eliz@gnu.org>
8243
8244         * gdb.texinfo (SVR4 Process Information, The isatty call)
8245         (The system call): Don't use foo(N) notation for man pages and
8246         functions.
8247         (Compilation, DJGPP Native): Improve wording.
8248
8249 2005-04-27  Eli Zaretskii  <eliz@gnu.org>
8250
8251         * gdb.texinfo (Backtrace): Describe backtraces with arguments that
8252         were optimized away.
8253
8254 2005-04-22  Eli Zaretskii  <eliz@gnu.org>
8255
8256         * gdb.texinfo (Remote configuration): Document "set/show
8257         get-thread-local-storage-address".  Add cross-reference to the
8258         description of the qGetTLSAddr packet.
8259         (General Query Packets): Mention "set remote
8260         get-thread-local-storage-address" and add a reference to its
8261         description.
8262
8263 2005-04-19  Nick Roberts  <nickrob@snap.net.nz>
8264
8265         * gdb.texinfo (Backtrace): Describe 'bt full'.
8266
8267 2005-04-17  Nick Roberts  <nickrob@snap.net.nz>
8268
8269         * gdb.texinfo (Mode Options): Fix typo.
8270         (GDB/MI): Describe how to invoke GDB/MI.
8271
8272 2005-04-16  Eli Zaretskii  <eliz@gnu.org>
8273
8274         * gdb.texinfo (OS Information): Renamed from Auxiliary Vector; all
8275         references changed.  Add description of "info udot".
8276         (Files): Document "set/show stop-on-solib-events".
8277         (M32R/D): Document "set/show download-path", "set/show
8278         board-address", "set/show server-address", "upload", "tload".
8279         Document "sdireset", "sdistatus", "debug_chaos", "use_debug_dma",
8280         "use_mon_code", "use_ib_break", "use_dbt_break".
8281         (Maintenance Commands): Improve indexing.
8282         (Target Commands): Document "set/show hash", "set/show debug
8283         monitor".
8284         (SVR4 Process Information): Document "info pidlist" and "info
8285         meminfo".  Document "set/show procfs-tarce" and "set/show
8286         procfs-file".  Document "proc-trace-*" and "proc-untrace-*".
8287         (Symbols, The Print Command with Objective-C): Improve indexing.
8288         (Objective-C): Add references to "info classes" and "info
8289         selectors".
8290         (Debugging Output): Improve wording.  Document "set/show debug
8291         solib-frv".  Fix "set/show debugvarobj".
8292         (Set Breaks): Add index entry for "hardware breakpoints".
8293         (Renesas ICE): Document "e7000", "ftplogin", "ftpload", "drain",
8294         and "set/show usehardbreakpoints".
8295         (MIPS Embedded): Document "se/show syn-garbage-limit", "set/show
8296         monitor-prompt", "set/show monitor-warnings", "pmon".
8297         (ARM): Document "rdilogfile", "rdilogenable", "set/show
8298         rdiromatzero", "set/show rdiheartbeat".
8299         (PowerPC): Document SDS-specific commands "set/show sdstimeout",
8300         "sds".
8301         (Embedded Processors): Document the "sim" command.
8302         (Remote): Document the "remote" command.
8303         (DJGPP Native): Document the "info serial" command.
8304         (Threads): Document "maint info sol-threads".
8305         (Files): Document "nosharedlibrary", "add-symbol-file-from-memory".
8306         (Set Breaks): Improve indexing.
8307         (Command Syntax): Add a reference to dont-repeat.
8308         (Define): Document "dont-repeat".
8309         (TUI Commands): Document "tabset".
8310         (WinCE): New subsection.  Document "set/show remotedirectory",
8311         "set/show remoteupload", "set/show remoteaddhost".
8312
8313 2005-04-15  Eli Zaretskii  <eliz@gnu.org>
8314
8315         * gdb.texinfo (Hurd Native): New subsection, documents
8316         Hurd-specific commands.
8317         (Maintenance Commands): Add cross-reference to "Debugging Output".
8318         (Debugging Output): Document "set/show debug lin-lwp".
8319         (MIPS): Improve documentation of heuristic-fence-post.  Document
8320         "set/show mips abi", "set/show mips saved-gpreg-size", "set/show
8321         mips stack-arg-size", "set/show mips mask-address", "set/show mips
8322         remote-mips64-transfers-32bit-regs", "set/show debug mips".
8323         (ARM): Document ARM-specific commands.
8324         (AVR): New section.  Document "info io_registers".
8325         (CRIS): New section.  Document "set/show cris-version" and
8326         "set/show cris-dwarf2-cfi".
8327         (HPPA): New section.  Document "set/show debug hppa" and "maint
8328         print unwind".
8329         (Neutrino): New subsection.  Document "set/show debug nto-debug".
8330         (Super-H): New section.  Document the "regs" command.
8331         (Debugging Output): Document "set/show debug aix-thread".
8332
8333 2005-04-09  Eli Zaretskii  <eliz@gnu.org>
8334
8335         * gdb.texinfo (Print Settings): Document "set/show print
8336         pascal_static-members", "set print repeats", "show print
8337         null-stop".  Improve indexing.  Fix documentation of "set print
8338         union".
8339         (Pascal): New section.
8340         (Supported languages): Rename from "Support"; all references
8341         updated.  Add a menu item for Pascal.
8342         (Numbers): Document "set radix.
8343         (Screen Size): Document "set/show pagination".
8344         (MIPS Embedded): Remove "set processor" documentation.
8345         (Remote configuration): Document "set/show X/P/Z-packet",
8346         "set/show read-aux-vector-packet", "set/show remote
8347         symbol-lookup-packet", "set/show remote verbose-resume-packet",
8348         "set/show remoteaddresssize", "set/show remotebaud", "set/show
8349         remotedebug", "set/show remotebreak", "set/show remotedevice",
8350         "set/show remotelogfile".
8351         (Auxiliary Vector): Add reference to the description of the
8352         read-aux-vector-packet setting.
8353         (Set Watchpoints): Add a cross-reference to "set remote
8354         hardware-breakpoint-limit".
8355         (General Query Packets): Add indexing of requests and
8356         cross-references to related commands in "Remote configuration".
8357         (File-I/O Overview, The system call): Fix wording and typos.
8358         (Thread Stops): Add index entries.
8359         (Continuing and Stepping): Document "show step-mode".
8360         (i386): New node.  Document "set/show struct-convention".
8361         (Files): Document "show trust-readonly-sections".
8362         (Calling): Document "set/show unwindonsignal".
8363         (Messages/Warnings): Add index entries.
8364         (Maintenance Commands): Document "set/show watchdog".
8365         (Annotations Overview): Document "show annotate".
8366         (Set Watchpoints): Add index entries.
8367         (Symbols): Fix doc of case-sensitive.
8368         (ABI): Document "show coerce-float-to-double".
8369         (Convenience Vars, Help): Improve indexing.
8370         (Machine Code): Document "show disassembly-flavor".
8371         (Debugging C plus plus): Document "show overload-resolution".
8372         (Value History, Signaling): Add index entries.
8373
8374 2005-04-08  Eli Zaretskii  <eliz@gnu.org>
8375
8376         * gdb.texinfo (Show): Move @kindex entries to their proper places.
8377         (Processes): Fix wording.
8378         (History, List, Logging output, Define, Symbols, Print Settings):
8379         Improve indexing.
8380
8381 2005-04-03  Eli Zaretskii  <eliz@gnu.org>
8382
8383         * gdb.texinfo (Targets): Document "set/show architecture".  Remove
8384         redundant index entry for "target" command.
8385         (Backtrace): Add index entries.
8386         (Symbols, Fortran): Document the "set case-sensitive" command.
8387         (DJGPP Native): Document "set com1base", "set com1irq", etc.
8388         (Print Settings): Add index entry for "set demangle-style".
8389         (Target Commands): Document "set download-write-size".
8390         (Debugging Output): Document "set exec-done-display".
8391
8392 2005-04-02  Eli Zaretskii  <eliz@gnu.org>
8393
8394         * gdb.texinfo (Files): Fix the name and documentation of
8395         add-shared-symbol-files.  Document its alias assf.  Update the
8396         list of OSs where GDB supports shared libraries.  Fix markup.
8397         (Continuing and Stepping): Add reference to @var{location} in the
8398         text.
8399         (Dump/Restore Files): Fix reference to @{filename}.
8400         (Help): Fix wording.
8401         (Attach): Ditto.
8402         (Set Watchpoints): Ditto.
8403         (Backtrace): Remove redundant index entries.  Improve index
8404         entries.
8405         (Delete Breaks): Fix wording.
8406         (Memory): Document the compare-sections command.
8407         (Memory Region Attributes): Improve wording.
8408         (Disabling): Improve wording.
8409         (Fortran): New subsection.  Document the "info common" command.
8410         (Help): Document aliases "info copying" and "info warranty".
8411         (Caching Remote Data): New section.  Document the "set/show
8412         remotecache" and "info dcache" commands.
8413         (Show): Fix wording of the documentation of the "set
8414         extension-language" command.
8415         (Signals): Add index entry for "info handle".
8416         (Memory Region Attributes): Fix punctuation.
8417         (Symbols): Change the arg name to "location" and refer to it in
8418         the text.  Fix wording of "info types" doc.
8419         (Threads): Fix usage of @enumerate @item's.
8420         (Listing Tracepoints): Add index entry for "info tp".
8421         (Set Watchpoints): Add xref to "info break" description.
8422         (Macros): Add an index entry for "macro exp1".  Document the
8423         "macro list" command.
8424         (Maintenance Commands): Document "flushregs", "maint agent",
8425         "maint check-symtabs", "maint cplus", "maint demangle", "maint
8426         deprecate", "maint undeprecate", "maint dump-me", "maint packet",
8427         "maint print architecture", "maint print objfiles", "maint print
8428         statistics", "maint print type", "maint show-debug-regs", "maint
8429         space", "maint time", and "maint translate-address".
8430         (Connecting): Document the "monitor" command.
8431         (Annotations Overview): Describe the "set annotate" command.
8432
8433 2005-04-01  Eli Zaretskii  <eliz@gnu.org>
8434
8435         * gdb.texinfo (Set Watchpoints): Document can-use-hw-watchpoints.
8436         Rearrange index entries and improve wording about support for
8437         hardware watchpoints.
8438
8439 2005-03-10  Bob Rossi  <bob@brasko.net>
8440
8441         * gdb.texinfo: Update copyright
8442
8443 2005-02-09  Theodore A. Roth  <troth@openavr.org>
8444
8445         * gdb.texinfo (General Query Packets): Fix texinfo compile warning and
8446         error.
8447
8448 2005-02-03  Kevin Buettner  <kevinb@redhat.com>
8449
8450         * gdb.texinfo (General Query Packets): Document qGetTLSAddr packet.
8451
8452 2005-01-17  Michael Snyder  <msnyder@redhat.com>
8453
8454         * gdb.texinfo: Fix spelling, infinte  ->  infinite.
8455
8456 2005-01-08  Mark Kettenis  <kettenis@gnu.org>
8457
8458         * observer.texi (GDB Observers): Document "solib_loaded".
8459
8460 2005-01-07  Andrew Cagney  <cagney@gnu.org>
8461
8462         * configure.ac: Rename configure.in, require autoconf 2.59.
8463         * configure: Re-generate.
8464
8465         * configure.in: Replace configdirs with multiple references to
8466         AC_CONFIG_SUBDIRS.
8467         * configure: Re-generate.
8468
8469 2005-01-04  Andrew Cagney  <cagney@gnu.org>
8470
8471         * gdbint.texinfo (Versions and Branches): Make the date (YYYYMMDD)
8472         part of the version number.
8473
8474 2004-12-24  Mark Kettenis  <kettenis@gnu.org>
8475
8476         * gdbint.texinfo (Algorithms): Remove description of
8477         TARGET_DISABLE_HW_WATCHPOINTS and TARGET_ENABLE_HW_WATCHPOINTS.
8478
8479 2004-12-07  Jim Blandy  <jimb@redhat.com>
8480
8481         * gdb.texinfo (General Query Packets): Specify that thread ID's in
8482         the 'qC' and 'qThreadInfo' packets are unsigned hexidecimal
8483         numbers.
8484
8485 2004-12-07  Andreas Schwab  <schwab@suse.de>
8486
8487         * gdb.texinfo (Mode Options): Document -l option.
8488
8489 2004-12-04  Eli Zaretskii  <eliz@gnu.org>
8490
8491         * gdbint.texinfo (Algorithms): More accurate description of
8492         STOPPED_BY_WATCHPOINT.  Point out that target_stopped_data_address
8493         is not needed unless data-read and data-access watchpoints are
8494         supported.  Add a description of how GDB checks whether the
8495         inferior stopped because a watchpoint was hit.
8496
8497 2004-11-23  Eli Zaretskii  <eliz@gnu.org>
8498
8499         * gdb.texinfo (Files): Add cross-reference to description of
8500         -readnow command-line switch.
8501
8502 2004-11-10  Randolph Chung  <tausq@debian.org>
8503
8504         * gdb.texinfo: Document set/show backtrace past-entry commands.
8505         Rearrange index entries for set/show backtrace past-main.
8506
8507 2004-11-10  Jon Beniston <jon@beniston.com>
8508
8509         Committed by Andrew Cagney  <cagney@gnu.org>.
8510         * gdb.texinfo (Remote Serial Protocol): Further describe
8511         binary transfer escaping mechanism .
8512
8513 2004-11-08  Randolph Chung  <tausq@debian.org>
8514
8515         * gdb.texinfo (inferior_debugging info): Document "set debug infrun"
8516         and "show debug infrun".  Add index entries.
8517
8518 2004-10-23  Eli Zaretskii  <eliz@gnu.org>
8519
8520         * gdb.texinfo (SVR4 Process Information): Document subcommands of
8521         "info proc" that are already implemented.  Add index entries.
8522         (Working Directory): Add a cross-reference to "info proc" command.
8523         (Files): Add a tip for decreasing memory used for symtabs from
8524         shared libraries.
8525         (Starting): Fix whitespace; make "elaboration" stand out where it
8526         is first used, and add an index entry for the term.
8527         (Calling): Expand and elaborate text.  Add "print".  Add the
8528         description of problems with weak aliases.
8529         (Core File Generation): New section.
8530
8531 2004-10-12  Andrew Cagney  <cagney@gnu.org>
8532
8533         * gdbint.texinfo (Versions and Branches): New chapter.
8534         (Releasing GDB): Delete "Versions and Branches" section.
8535         (Top): Add "Versions and Branches".
8536
8537 2004-10-08  Eli Zaretskii  <eliz@gnu.org>
8538
8539         * gdb.texinfo (Editing, History): Add cross-references to the
8540         included Readline and History user documentation.  Remove
8541         references to the symbol have-readline-appendices which is unused
8542         and undefined.
8543         (History): Fix indexing.
8544
8545 2004-10-08  Jeff Johnston  <jjohnstn@redhat.com>
8546
8547         * gdbint.texinfo (target_stopped_data_address): Update to
8548         new prototype.
8549         (i386_stopped_data_address): Update prototype and description.
8550         (i386_stopped_by_watchpoint): New function and description.
8551
8552 2004-10-03  Paul N. Hilfinger  <hilfinger@gnat.com>
8553
8554         * gdb.texinfo (Filenames): Add Ada suffixes.
8555         (Ada) New section.
8556
8557 2004-09-27  Andrew Cagney  <cagney@gnu.org>
8558             Robert Picco  <Robert.Picco@hp.com>
8559
8560         * gdb.texinfo (Packets): Document the "p" packet.
8561
8562 2004-09-21  Jason Molenda  (jmolenda@apple.com)
8563
8564         * gdb.texinfo (Paths and Names of the Source Files): Document the
8565         meaning of values in the 'desc' field of a SO stab.
8566
8567 2004-09-20  Daniel Jacobowitz  <dan@debian.org>
8568
8569         * gdb.texinfo (Maintenance Commands): Document "maint set dwarf2
8570         max-cache-age" and "maint show dwarf2 max-cache-age".
8571
8572 2004-09-16  Eli Zaretskii  <eliz@gnu.org>
8573
8574         * gdb.texinfo (Set Breaks): Add index entry for setting
8575         breakpoints on overloaded C++ functions that are not members of
8576         any classes.  Add an example and an index entry for setting
8577         breakpoints on all program functions.
8578         (Character Sets, Macros, Overlay Commands)
8579         (Non-debug DLL symbols, GDB/MI Output Syntax)
8580         (Annotations Overview, Maintenance Commands, File-I/O Overview):
8581         Use "(@value{GDBP})" instead of a literal "(gdb)".
8582
8583 2004-09-12  Andrew Cagney  <cagney@gnu.org>
8584
8585         * gdbint.texinfo (Native Debugging): Delete description of
8586         FILES_INFO_HOOK.
8587
8588 2004-09-11  Paul Hilfinger  <hilfinger@gnat.com>
8589
8590         * gdbint.texinfo (User Interface): Change local_hex_string_custom
8591         to hex_string_custom (not historically correct, but more
8592         understandable, given the current code).
8593
8594 2004-09-03  Andrew Cagney  <cagney@gnu.org>
8595
8596         * gdbint.texinfo (Native Debugging): Delete SVR4_SHARED_LIBS.
8597
8598 2004-09-01  Jeff Johnston  <jjohnstn@redhat.com>
8599
8600         * observer.texi (solib_unloaded): New observer.
8601
8602 2004-08-24  Andrew Cagney  <cagney@gnu.org>
8603
8604         * gdbint.texinfo (Target Architecture Definition): Add missing
8605         comma.
8606
8607 2004-08-20  Michael Chastain  <mec.gnu@mindspring.com>
8608
8609         * (Using the Testsuite): build != host is supported,
8610         but some test scripts do not support build != host.
8611
8612 2004-08-14  Mark Kettenis  <kettenis@gnu.org>
8613
8614         * gdbint.texinfo (Host Definition): Delete description of
8615         FCLOSE_PROVIDED and GETENV_PROVIDED.
8616
8617 2004-08-05  Mark Kettenis  <kettenis@chello.nl>
8618
8619         * gdbint.texinfo (Host Definition): Delete description of
8620         NO_SYS_FILE.
8621         (Native Debugging): Delete description of KERNEL_U_ADDR_BSD and
8622         PTRACE_FP_BUG.
8623
8624 2004-08-05  Andrew Cagney  <cagney@gnu.org>
8625
8626         * gdbint.texinfo (Target Architecture Definition): Delete
8627         reference to deprecated_read_fp.
8628
8629 2004-08-02  Andrew Cagney  <cagney@gnu.org>
8630
8631         * gdbint.texinfo (Target Architecture Definition): Delete
8632         description of DEPRECATED_REGISTER_BYTES.
8633
8634 2004-07-30  Baurjan Ismagulov  <ibr@ata.cs.hun.edu.tr>
8635
8636         * gdb.texinfo (Source Path): Document the new behavior of
8637         searching for the source files.
8638
8639 2004-07-17  Eli Zaretskii  <eliz@gnu.org>
8640
8641         * gdb.texinfo (Edit): Fix markup of EDITOR and improve wording.
8642         (Search, Expressions, Arrays, Variables, Data, Machine Code)
8643         (Auto Display): Improve indexing.
8644
8645 2004-07-16  Andrew Cagney  <cagney@gnu.org>
8646
8647         * gdb.texinfo (Mode Options): Delete documentation on "-async" and
8648         "-noasync".
8649
8650 2004-07-09  Eli Zaretskii  <eliz@gnu.org>
8651
8652         * gdb.texinfo: Fix @kindex entries so that multiple commands that
8653         have the same prefix have only their prefix in the index.
8654
8655 2004-07-03  Mark Kettenis  <kettenis@gnu.org>
8656
8657         * gdb.texinfo (BSD libkvm Interface): New node (section)
8658         (Native): Add it to the menu.
8659
8660 2004-07-01  Mark Kettenis  <kettenis@gnu.org>
8661
8662         * gdbint.texinfo (Target Architecture Definition): Remove
8663         PCC_SOL_BROKEN.
8664
8665 2004-06-24  Mark Kettenis  <kettenis@gnu.org>
8666
8667         * gdbint.texinfo (Target Architecture Definition): Remove
8668         SUN_FIXED_LBRAC_BUG.
8669
8670 2004-06-26  Andrew Cagney  <cagney@gnu.org>
8671
8672         * gdbint.texinfo (Coding): Replace xasprintf with xstrprintf.
8673
8674 2004-06-20  Andrew Cagney  <cagney@gnu.org>
8675
8676         * gdbint.texinfo (Target Architecture Definition): Deprecate
8677         USE_STRUCT_CONVENTION.
8678
8679 2004-06-19  Michael Chastain  <mec.gnu@mindspring.com>
8680
8681         gdb.texinfo (Bug Reporting): Mention session recording,
8682         with the script command or Emacs.
8683
8684 2004-06-18  Andrew Cagney  <cagney@gnu.org>
8685
8686         * gdbint.texinfo (Target Architecture Definition): Deprecate
8687         FUNCTION_START_OFFSET.
8688
8689 2004-06-14  Andrew Cagney  <cagney@gnu.org>
8690
8691         Based on changes from Karl Berry.
8692         * gdb.texinfo: Do not use @sc in a direntry.
8693         * stabs.texinfo: Change @dircateogry to "Software development".
8694         * gdbint.texinfo, gdb.texinfo, annotate.texinfo: Ditto.
8695
8696 2004-06-13  Andrew Cagney  <cagney@gnu.org>
8697
8698         * gdbint.texinfo (Target Architecture Definition): Delete
8699         description of RETURN_VALUE_ON_STACK.
8700
8701 2004-06-09  Andrew Cagney  <cagney@gnu.org>
8702
8703         * gdbint.texinfo (Native Debugging): Restore "@table @code"
8704         deleted by previous patch.
8705
8706 2004-06-08  Andrew Cagney  <cagney@gnu.org>
8707
8708         * gdbint.texinfo (Native Debugging): Delete documentation on
8709         ATTACH_DETACH.
8710
8711 2004-06-06  Randolph Chung  <tausq@debian.org>
8712
8713         * gdb.texinfo (push_dummy_call): Use @code{struct value}.
8714
8715 2004-06-06  Randolph Chung  <tausq@debian.org>
8716
8717         * gdb.texinfo (push_dummy_call): Update argument list to match
8718         the new push_dummy_call method signature.  Describe the function
8719         argument.
8720
8721 2004-05-24  Joel Brobecker  <brobecker@gnat.com>
8722
8723         * gdb.texinfo (Starting): Document new start command.
8724
8725 2004-05-21  Andrew Cagney  <cagney@redhat.com>
8726
8727         * observer.texi (GDB Observers): Document "inferior_created".
8728
8729 2004-05-08  Andrew Cagney  <cagney@redhat.com>
8730
8731         * gdbint.texinfo (Target Architecture Definition): Delete
8732         description of DO_DEFERRED_STORES.
8733
8734         * gdbint.texinfo (Target Architecture Definition): Delete
8735         references to DEPRECATED_FIX_CALL_DUMMY.
8736
8737         * gdbint.texinfo (Target Architecture Definition): Delete
8738         description of DEPRECATED_CALL_DUMMY_WORDS,
8739         DEPRECATED_SIZEOF_CALL_DUMMY_WORDS, and CALL_DUMMY.
8740
8741         * gdbint.texinfo (Target Architecture Definition): Delete
8742         description of DEPRECATED_PUSH_DUMMY_FRAME.
8743
8744         * gdbint.texinfo (Target Architecture Definition): Delete
8745         reference to DEPRECATED_CALL_DUMMY_BREAKPOINT_OFFSET.
8746
8747 2004-05-07  Andrew Cagney  <cagney@redhat.com>
8748
8749         * observer.texi (GDB Observers): Add "Debugging" section.  Include
8750         cross reference to "set/show debug observer".
8751         * gdb.texinfo (Debugging Output): Document "set/show debug
8752         observer".
8753
8754 2004-05-01  Andrew Cagney  <cagney@redhat.com>
8755
8756         * gdbint.texinfo (Target Architecture Definition): Delete
8757         description of DEPRECATED_PC_IN_SIGTRAMP.
8758
8759 2004-04-30  Andrew Cagney  <cagney@redhat.com>
8760
8761         * gdbint.texinfo (Target Architecture Definition): Delete
8762         documentation for BELIEVE_PCC_PROMOTION_TYPE, no longer defined.
8763
8764 2004-04-30  Orjan Friberg  <orjanf@axis.com>
8765
8766         * observer.texi (GDB Observers): Correct spelling.
8767
8768 2004-04-26  Orjan Friberg  <orjanf@axis.com>
8769
8770         * observer.texi (GDB Observers): Add target_changed event.
8771
8772 2004-04-08  Andrew Cagney  <cagney@redhat.com>
8773
8774         * observer.texi (GDB Observers): Rework, provide generic observer
8775         definitions and then a list of observable events.
8776
8777 2004-04-04  Andrew Cagney  <cagney@redhat.com>
8778
8779         * gdbint.texinfo (Host Definition): Delete reference to
8780         NO_SIGINTERRUPT.
8781
8782 2004-04-02  Andrew Cagney  <cagney@redhat.com>
8783
8784         * gdbint.texinfo (Target Architecture Definition): Delete
8785         reference to DEPRECATED_CALL_DUMMY_LENGTH.
8786
8787 2004-03-28  Stephane Carrez  <stcarrez@nerim.fr>
8788
8789         * gdb.texinfo (TUI Commands): Document tui reg commands.
8790
8791 2004-03-26  Andrew Cagney  <cagney@redhat.com>
8792
8793         * gdb.texinfo (TUI): Delete reference to --enable-tui.  Mention
8794         "gdbtui".
8795         (Mode Options): Mention "gdbtui".  Use "Text" not "Terminal".
8796         (Contributors): Mention both Text and Terminal User Interface.
8797
8798 2004-03-23  Andrew Cagney  <cagney@redhat.com>
8799
8800         * gdbint.texinfo (Target Architecture Definition): Deprecate
8801         references to SIGTRAMP_START and SIGTRAMP_END.
8802
8803 2004-03-23  Andrew Cagney  <cagney@redhat.com>
8804
8805         * gdbint.texinfo (Target Architecture Definition): Deprecate
8806         references to PC_IN_SIGTRAMP.
8807
8808 2004-03-19  Andrew Cagney  <cagney@redhat.com>
8809
8810         * gdbint.texinfo (Target Architecture Definition): Delete
8811         reference to GDB_TARGET_IS_HPPA.
8812
8813 2004-03-18  Andrew Cagney  <cagney@redhat.com>
8814
8815         * gdbint.texinfo (Coding): Update section on gdbarch_data,
8816         describe pre_init and post_init.
8817
8818 2004-03-09  Daniel Jacobowitz  <drow@mvista.com>
8819
8820         * gdb.texinfo (Debugging Output): Document values for "set debug
8821         target".
8822
8823 2004-02-28  Andrew Cagney  <cagney@redhat.com>
8824
8825         * gdb.texinfo (Contributors): Mention GDB 6.1 release engineer.
8826
8827 2004-02-26  Jeff Johnston  <jjohnstn@redhat.com>
8828
8829         * gdb.texinfo (breakpoints): Add information about the
8830         new "set breakpoint pending" and "show breakpoint pending"
8831         commands.
8832
8833 2004-02-26  Andrew Cagney  <cagney@redhat.com>
8834
8835         * gdbint.texinfo (Coding): Document use of gdbarch_obstack_zalloc
8836         in Per-architecture module data section.
8837
8838 2004-02-25  Roland McGrath  <roland@redhat.com>
8839
8840         * gdb.texinfo (General Query Packets): Document qPart:... packets.
8841
8842 2004-02-24  Andrew Cagney  <cagney@redhat.com>
8843
8844         * annotate.texinfo: Wrap fdl.texi include in raise/lower sections.
8845         * gdb.texinfo, gdbint.texinfo, stabs.texinfo: Ditto.
8846         * fdl.texi: Import Version 1.2, November 2002.
8847
8848 2004-02-17  Andrew Cagney  <cagney@redhat.com>
8849
8850         * gdb.texinfo (Mode Options): Note that "mi1" is deprecated.
8851
8852 2004-02-16  Andrew Cagney  <cagney@redhat.com>
8853
8854         * gdbint.texinfo (Target Architecture Definition): Deprecate
8855         FRAMELESS_FUNCTION_INVOCATION.
8856
8857 2004-02-16  Andrew Cagney  <cagney@redhat.com>
8858
8859         * gdbint.texinfo (Coding): Mention -Wunused-function.
8860
8861 2004-02-14  Andrew Cagney  <cagney@redhat.com>
8862
8863         * gdbint.texinfo (Target Architecture Definition): Delete
8864         description of DEPRECATED_CALL_DUMMY_STACK_ADJUST.
8865
8866 2004-02-12  Elena Zannoni  <ezannoni@redhat.com>
8867
8868         * gdb.texinfo: Properly quote the name "C++".
8869         * gdbint.texinfo: Ditto.
8870         * stabs.texinfo: Ditto.
8871
8872 2004-02-11  Elena Zannoni  <ezannoni@redhat.com>
8873
8874         * gdbint.texinfo (Support Libraries): Add doco about obstacks and
8875         minimal information about libiberty.
8876
8877 2004-02-06  Michael Chastain  <mec.gnu@mindspring.com>
8878
8879         * gdb.texinfo (Auxiliary Vector): Fix thinko with @value{GDBN}.
8880
8881 2004-02-04  Roland McGrath  <roland@redhat.com>
8882
8883         * gdb.texinfo (Auxiliary Vector): New node (section).
8884         (Data): Add it to the menu.
8885
8886 2004-02-02  Jeff Johnston  <jjohnstn@redhat.com>
8887
8888         * gdb.texinfo (Breakpoints): Add information about pending
8889         breakpoint support.
8890
8891 2004-01-26  Andrew Cagney  <cagney@redhat.com>
8892
8893         * gdb.texinfo (Overview): Delete references to the cisco protocol
8894         including the "N" response.
8895
8896 2004-01-26  Andrew Cagney  <cagney@redhat.com>
8897
8898         * gdbint.texinfo (Target Architecture Definition): Rename
8899         EXTRACT_STRUCT_VALUE_ADDRESS to
8900         DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS.
8901
8902 2004-01-24  Eli Zaretskii  <eliz@gnu.org>
8903
8904         * gdb.texinfo (KOD): Document "show os".  Add index entries for
8905         "set/show os" and "info cisco" commands.
8906
8907 2004-01-21  Eli Zaretskii  <eliz@gnu.org>
8908
8909         * Makefile.in (install-info): Prepend $(DESTDIR) to $(infodir).
8910
8911 2004-01-19  Michael Chastain  <mec.gnu@mindspring.com>
8912
8913         * gdbint.texinfo: Delete USE_MMALLOC, NO_MMCHECK, MMCHECK_FORCE,
8914         MMAP_BASE_ADDRESS, MMAP_INCREMENT.
8915
8916 2004-01-19  Nick Roberts  <nick@nick.uklinux.net>
8917
8918         * gdb.texinfo (GDB/MI Stack Manipulation): Describe extension to
8919         -stack-list-locals.
8920         (GDB/MI Variable Objects): Describe extension to
8921         -var-list-children.
8922
8923 2004-01-17  Daniel Jacobowitz  <drow@mvista.com>
8924
8925         * gdbint.texinfo (DECR_PC_AFTER_HW_BREAK): Don't document.
8926
8927 2004-01-17  Andrew Cagney  <cagney@redhat.com>
8928
8929         * gdbint.texinfo (Target Architecture Definition): Delete
8930         documentation on DEPRECATED_NPC_REGNUM.
8931
8932 2004-01-13  Daniel Jacobowitz  <drow@mvista.com>
8933
8934         * gdb.texinfo: Update copyright year.  Mention that set
8935         follow-fork-mode is supported on GNU/Linux.  Remove documentation of
8936         "set follow-fork-mode ask".
8937
8938 2004-01-13  Andrew Cagney  <cagney@redhat.com>
8939
8940         * gdbint.texinfo: Update copyright year.
8941         (Coding): Add -Wunused-label to list of -Werror warnings.
8942
8943 2004-01-08  Jason Molenda  <jmolenda@apple.com>
8944             Eli Zaretskii  <eliz@gnu.org>
8945
8946         * gdb.texinfo: Update copyright.
8947         (Objective-C): "methodName" typeo fixed.  Add @code/@var markup
8948         around names, as appropriate.  Minor syntax cleanup of
8949         _NSPrintForDebugger explanation.  Two spaces after periods.
8950         GDBN used instead of lit. "gdb".  Index entries added for
8951         print-object and _NSPrintForDebugger.  @noindent added in one spot.
8952
8953 2003-11-11  Elena Zannoni  <ezannoni@redhat.com>
8954
8955         * stabs.texinfo: Add dircategory and direntry commands.
8956         * annotate.texinfo: Ditto.
8957
8958 2003-11-10  Andrew Cagney  <cagney@redhat.com>
8959
8960         * gdbint.texinfo (Target Architecture Definition): Replace the
8961         return_value method's "inval" and "outval" parameters with
8962         "readbuf" and "writebuf".
8963
8964 2003-10-28  Jim Blandy  <jimb@redhat.com>
8965
8966         * gdb.texinfo (The F request packet, The F reply packet): Renamed
8967         from "The `F' request packet" and "The `F' reply packet", to make
8968         texi2dvi happy.
8969         (File-I/O remote protocol extension): Update menu entries, too.
8970
8971 2003-10-26  Michael Chastain  <mec@shout.net>
8972
8973         * gdb.texinfo (Thread Stops): Document the issue with
8974         premature return from system calls in multi-threaded programs.
8975
8976 2003-10-24  Andrew Cagney  <cagney@redhat.com>
8977
8978         * annotate.texinfo: Fix "fortunatly"[sic].
8979
8980 2003-10-23  Kei Sakamoto  <sakamoto.kei@renesas.com>
8981
8982         * gdb.texinfo (Contributors to GDB): Replace "Renesas"
8983         with "Hitachi" and "Mitsubishi".
8984
8985 2003-10-20  Andrew Cagney  <cagney@redhat.com>
8986
8987         * gdbint.texinfo (Target Architecture Definition): Document
8988         gdbarch_return_value.  Add cross references from
8989         USE_STRUCT_CONVENTION, EXTRACT_RETURN_VALUE, and
8990         STORE_RETURN_VALUE, and from/to EXTRACT_STRUCT_VALUE_ADDRESS.
8991
8992 2003-10-18  Mark Kettenis  <kettenis@gnu.org>
8993
8994         * gdbint.texinfo (Target Architecture Definition): Document
8995         regset_from_core_section.
8996
8997 2003-10-16  Kei Sakamot Sakamoto  <sakamoto.kei@renesas.com>
8998
8999         * gdb.texinfo (M32R/D): Mention m32rsdi target.
9000
9001 2003-10-15  Kevin Buettner  <kevinb@redhat.com>
9002
9003         From Anthony Green  <green@redhat.com>:
9004         * gdb.texinfo (Breakpoints related warnings): Insert into menu.
9005
9006 2003-10-14  Kevin Buettner  <kevinb@redhat.com>
9007
9008         * gdb.texinfo (Breakpoint related warnings): New node.
9009         * gdbint.texinfo (ADJUST_BREAKPOINT_ADDRESS): Document.
9010
9011 2003-10-13  Daniel Jacobowitz  <drow@mvista.com>
9012
9013         * gdb.texinfo (Remote Protocol): Document v and vCont.
9014
9015 2003-10-10  Kei Sakamoto  <sakamoto.kei@renesas.com>
9016
9017         * gdb.texinfo: Replace "Hitachi" and "Mitsubishi" with "Renesas".
9018         * gdbint.texinfo: Ditto.
9019
9020 2003-10-09  Andrew Cagney  <cagney@redhat.com>
9021
9022         From 2003-09-18 David Anderson <davea@sgi.com>:
9023         * gdb.texinfo (GDB/MI Symbol Query): Replace "comamnd" with
9024         "command".
9025
9026 2003-10-03  Andrew Cagney  <cagney@redhat.com>
9027
9028         * gdbint.texinfo (Target Architecture Definition): Deprecate
9029         IBM6000_TARGET.  Mention that it implies an RS/6000 system and not
9030         just target.
9031
9032 2003-10-02  Andrew Cagney  <cagney@redhat.com>
9033
9034         * gdbint.texinfo (Target Architecture Definition): Rename
9035         REGISTER_RAW_SIZE to DEPRECATED_REGISTER_RAW_SIZE.
9036         * gdb.texinfo (Packets, Stop Reply Packets): Ditto.
9037         * gdbint.texinfo (Target Architecture Definition): Rename
9038
9039 2003-09-30  Andrew Cagney  <cagney@redhat.com>
9040
9041         REGISTER_VIRTUAL_SIZE to DEPRECATED_REGISTER_VIRTUAL_SIZE.
9042         (Target Architecture Definition):
9043
9044         * gdbint.texinfo (Target Architecture Definition): Rename
9045         REGISTER_VIRTUAL_TYPE to DEPRECATED_REGISTER_VIRTUAL_TYPE.
9046
9047 2003-09-29  Andrew Cagney  <cagney@redhat.com>
9048
9049         * gdbint.texinfo (Target Architecture Definition): Delete
9050         documentation for NEED_TEXT_START_END.
9051
9052         * gdbint.texinfo (Target Architecture Definition): Rename
9053         NPC_REGNUM to DEPRECATED_NPC_REGNUM.  Add cross reference to
9054         TARGET_WRITE_PC.
9055
9056 2003-09-22  Michael Chastain  <mec@shout.net>
9057
9058         * gdbint.texinfo (Testsuite Organization): Change gdb.c++ to gdb.cp.
9059
9060 2003-09-21  Anthony Green  <green@redhat.com>
9061
9062         * gdbint.texinfo (Target Architecture Definition): Fix typos.
9063
9064 2003-09-21  Mark Kettenis  <kettenis@gnu.org>
9065
9066         * gdbint.texinfo (Target Architecture Definition): Document
9067         stabs_argument_has_addr.
9068
9069 2003-09-18  Andrew Cagney  <cagney@redhat.com>
9070
9071         * gdbint.texinfo (Target Architecture Definition): Delete
9072         documentation on REGISTER_NAMES.
9073
9074 2003-09-13  Mark Kettenis  <kettenis@gnu.org>
9075
9076         * gdbint.texinfo (Target Architecture Definition): Replace
9077         REG_STRUCT_HAS_ADDR with DEPRECATED_REG_STRUCT_HAS_ADDR.
9078
9079 2003-09-11  Andrew Cagney  <cagney@redhat.com>
9080
9081         * gdbint.texinfo (Target Architecture Definition): Replace
9082         STACK_ALIGN with DEPRECATED_STACK_ALIGN.
9083
9084 2003-08-18  Andrew Cagney  <cagney@redhat.com>
9085
9086         * gdbint.texinfo (Target Architecture Definition): Document
9087         "frame_red_zone_size".
9088
9089 2003-08-09  Andrew Cagney  <cagney@redhat.com>
9090
9091         * gdb.texinfo (Backtrace): Replace "set/show backtrace-below-main"
9092         with "set/show backtrace past-main" and "set/show backtrace
9093         limit".
9094
9095 2003-08-08  H.J. Lu  <hongjiu.lu@intel.com>
9096
9097         * Makefile.in (install-info): Support DESTDIR.
9098         (install-html): Likewise.
9099
9100 2003-08-07  Andrew Cagney  <cagney@redhat.com>
9101
9102         Patch from Nick Roberts.
9103         * gdb.texinfo (Using GDB under GNU Emacs): Fix/update key
9104         bindings.  Remove description of send-gdb-command.
9105
9106 2003-08-07  Andrew Cagney  <cagney@redhat.com>
9107
9108         * gdb.texinfo (Mode Options): Mention that "mi2" was included in
9109         GDB 6.0.
9110
9111 2003-08-06  Andrew Cagney  <cagney@redhat.com>
9112
9113         * gdb.texinfo (Mode Options): Mention that level three is the
9114         highest available and that level 2 is deprecated.
9115         (Annotations Overview): Mention annotation levels. Cross reference
9116         to "Limitations of the Annotation Interface" in annotate.texi.
9117         (TODO, Value Annotations, Frame Annotations): Delete section.
9118         (Displays, Breakpoint Info): Delete.
9119
9120 2003-08-04  Andrew Cagney  <cagney@redhat.com>
9121
9122         * agentexpr.texi: Delete @bye.
9123         * Makefile.in (STABS_DOC_SOURCE_INCLUDES): Add "fdl.texi"
9124         (stabs.info): Add $(srcdir) to include search path.
9125         (html): Depend on "annotate_toc.html", and not "annotate.html".
9126         * stabs.texinfo: Ditto.  Include "fdl.texi".
9127         * gdbint.texinfo: Update copyright statement's list of invariant
9128         sections.
9129
9130 2003-07-28  Andrew Cagney  <cagney@redhat.com>
9131
9132         * Makefile.in (INFO_DEPS): Add annotate.info.
9133         (dvi, ps, html, pdf): Add annotate.
9134         (ANNOTATE_DOC_SOURCE_INCLUDES): New macro.
9135         (ANNOTATE_DOC_BUILD_INCLUDES): New macro.
9136         (ANNOTATE_DOC_FILES): New macro.
9137         (ANNOTATE_TEX_TMPS): New macro.
9138         (annotate.info, annotate_toc.html): Specify dependencies.
9139         (annotate.ps, annotate.pdf, annotate.dvi): Ditto.
9140         * annotate.texinfo: Rename annotate.texi.  Get building.  Add
9141         "Migrating to GDB/MI" and "Limitations of the Annotation
9142         Interface" chapters.  Mention why it is not part of the user
9143         guide.  Update copyright notice.  Include "fdl.texi".
9144
9145 2003-07-26  Stephane Carrez  <stcarrez@nerim.fr>
9146
9147         * gdb.texinfo (TUI Keys): Document C-x o key to switch active window.
9148
9149 2003-07-24  Daniel Jacobowitz  <drow@mvista.com>
9150
9151         * gdbint.texinfo (libgdb components): Correct a GDB to GDBN.
9152
9153 2003-07-24  Daniel Jacobowitz  <drow@mvista.com>
9154
9155         * gdb.texinfo (Server): Mention pidof.
9156
9157 2003-07-22  Andrew Cagney  <cagney@redhat.com>
9158
9159         * gdbint.texinfo (Coding): Add -Wformat-nonliteral to -Werror
9160         list.
9161
9162 2003-06-28  Daniel Jacobowitz  <drow@mvista.com>
9163
9164         * gdb.texinfo (Logging output): New chapter.
9165
9166 2003-06-24  Joel Brobecker  <brobecker@gnat.com>
9167
9168         * gdb.texinfo (Unsupported languages): New section.
9169         (Languages): Add link to new section.
9170
9171 2003-06-22  Andrew Cagney  <cagney@redhat.com>
9172
9173         * gdb.texinfo (Contributors): Mention 6.0 release engineer.
9174
9175 2003-06-22  Daniel Jacobowitz  <drow@mvista.com>
9176
9177         * gdbint.texinfo (Coding): Clarify use of gdb_XXX.h headers.
9178
9179 2003-06-22  Daniel Jacobowitz  <drow@mvista.com>
9180
9181         * Makefile.in (SFILES_INCLUDED): Add agentexpr.texi.
9182         * agentexpr.texi: Retitle section, and change it to an appendix.
9183         Comment out texinfo initialization.  Factor a @var{} into two
9184         pieces to prevent makeinfo warnings.
9185         * gdb.texinfo: Add Agent Expressions appendix.
9186
9187 2003-06-19  Daniel Jacobowitz  <drow@mvista.com>
9188
9189         * gdbint.texinfo (Native Conditionals): Remove PREPARE_TO_PROCEED.
9190
9191 2003-06-18  Daniel Jacobowitz  <drow@mvista.com>
9192
9193         * gdb.texinfo (Remote Debugging): New section "Connecting to a
9194         remote target".  Document the "detach" and "disconnect" commands.
9195         (Server, Netware, Debug Session): Reference "Connecting to a
9196         remote target".
9197         (GDB/MI Target Manipulation): Document "-target-disconnect".
9198
9199 2003-06-13  Andrew Cagney  <cagney@redhat.com>
9200
9201         * gdbint.texinfo (Target Architecture Definition): Deprecate
9202         REMOTE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT, and
9203         BIG_REMOTE_BREAKPOINT.  Cross reference BREAKPOINT_FROM_PC.
9204
9205 2003-06-09  Jim Blandy  <jimb@redhat.com>
9206
9207         * gdb.texinfo (Separate Debug Files): Remove extra semicolon.
9208
9209 2003-06-08  Andrew Cagney  <cagney@redhat.com>
9210
9211         * gdbint.texinfo (Target Architecture Definition): Delete
9212         documentation on FRAME_ARGS_ADDRESS_CORRECT.
9213
9214 2003-06-08  Andrew Cagney  <cagney@redhat.com>
9215
9216         * gdbint.texinfo (Target Architecture Definition): Document
9217         "unwind_sp".  Cross reference "unwind_sp" and TARGET_READ_SP.
9218
9219 2003-06-07  Adam Fedor  <fedor@gnu.org>
9220
9221         * gdb.texinfo: Add Objective-C documentation.
9222
9223 2003-06-01  Andrew Cagney  <cagney@redhat.com>
9224
9225         * gdbint.texinfo (Target Architecture Definition): Add "func_addr"
9226         parameter to "push_dummy_call".  Rename "dummy_addr" to "bp_addr".
9227
9228 2003-05-21  Andrew Cagney  <cagney@redhat.com>
9229
9230         * gdbint.texinfo (Target Architecture Definition): Delete
9231         references to "extract_address" and "store_address".
9232
9233 2003-05-16  Andrew Cagney  <cagney@redhat.com>
9234
9235         * gdbint.texinfo (Target Architecture Definition): Replace
9236         REGISTER_BYTES with DEPRECATED_REGISTER_BYTES.  Fix typo,
9237         DEPRECATED_REGISTER_SIZE instead of REGISTER_BYTE.
9238
9239 2003-05-14  Theodore A. Roth  <troth@openavr.org>
9240
9241         * gdbint.texinfo (Breakpoint Handling): Correct a double negative.
9242
9243 2003-05-10  H.J. Lu <hongjiu.lu@intel.com>
9244
9245         * Makefile.in (gdb-cfg.texi): Replace $$LN_S with $(LN_S).
9246         (gdb.dvi): Likewise.
9247         (gdb.pdf): Likewise.
9248         (links2roff): Likewise.
9249
9250 2003-05-08  Jim Blandy  <jimb@redhat.com>
9251
9252         * gdb.texinfo (Dump/Restore Files): Update documentation for
9253         'dump', 'append', and 'restore': note that format argument is
9254         optional; simplify presentation of the command variants; and be
9255         more precise about the formats.
9256
9257 2003-05-07  Jim Blandy  <jimb@redhat.com>
9258
9259         * gdb.texinfo (Symbols): Update documentation: 'maint list
9260         symtabs' and 'maint list psymtabs' have been renamed 'maint info
9261         symtabs' and 'maint info psymtabs'.
9262
9263 2003-05-05  Andrew Cagney  <cagney@redhat.com>
9264
9265         * gdbint.texinfo (Target Architecture Definition): Make
9266         CALL_DUMMY_WORDS, SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY_LENGTH,
9267         FIX_CALL_DUMMY, CALL_DUMMY_BREAKPOINT_OFFSET and
9268         CALL_DUMMY_BREAKPOINT_OFFSET deprecated.
9269
9270 2003-05-04  Andrew Cagney  <cagney@redhat.com>
9271
9272         * gdb.texinfo (Maintenance Commands): Document "maint print
9273         dummy-frames".
9274
9275 2003-05-04  Andrew Cagney  <cagney@redhat.com>
9276
9277         * gdb.texinfo (GDB/MI Symbol Query): Use @{ and @}.
9278
9279 2003-05-03  J. Brobecker  <brobecker@gnat.com>
9280
9281         Thierry Schneider  <tpschneider1@yahoo.com>
9282         * gdb.texinfo (section GDB/MI Symbol Query): Add documentation
9283         for new MI command.
9284
9285 2003-05-03  Andrew Cagney  <cagney@redhat.com>
9286
9287         * gdbint.texinfo (Target Architecture Definition): Document
9288         push_dummy_code.  Add cross references.
9289
9290 2003-05-02  Elena Zannoni  <ezannoni@redhat.com>
9291
9292         * gdb.texinfo (Character Sets): Update to reflect new behavior of
9293         set/show charsets commands.
9294
9295 2003-04-28  Andrew Cagney  <cagney@redhat.com>
9296
9297         * gdbint.texinfo (Target Architecture Definition): Replace
9298         read_fp, TARGET_READ_FP and FP_REGNUM, with deprecated_read_fp,
9299         DEPRECATED_TARGET_READ_FP and DEPRECATED_REGNUM.
9300
9301 2003-04-28  Andrew Cagney  <cagney@redhat.com>
9302
9303         * gdbint.texinfo (Target Architecture Definition): Rename
9304         "tm_print_insn" to "deprecated_tm_print_insn".
9305
9306 2003-04-09  Jim Blandy  <jimb@redhat.com>
9307
9308         * gdb.texinfo (Symbols): Document 'maint list symtabs' and 'maint
9309         list psymtabs'.
9310
9311 2003-04-08  Andrew Cagney  <cagney@redhat.com>
9312
9313         * gdbint.texinfo (Target Architecture Definition): Delete
9314         references to EXTRA_FRAME_INFO.
9315
9316 2003-04-08  Andrew Cagney  <cagney@redhat.com>
9317
9318         * gdbint.texinfo (Target Architecture Definition): Delete
9319         PRINT_TYPELESS_INTEGER.
9320
9321 2003-04-02  J. Brobecker  <brobecker@gnat.com>
9322
9323         * observer.texi (GDB Observers): Adjust the documentation for the
9324         normal_stop notification to better describe reality. Fix a couple
9325         of minor typos.
9326
9327 2003-04-02  Bob Rossi  <bob_rossi@cox.net>
9328
9329         * gdb.texinfo (GDB/MI Program Control): Add
9330         '-file-list-exec-source-file'
9331
9332 2003-03-31  Andrew Cagney  <cagney@redhat.com>
9333
9334         * gdbint.texinfo (Target Architecture Definition): Delete
9335         references to CALL_DUMMY_P.
9336
9337 2003-03-30  Andrew Cagney  <cagney@redhat.com>
9338
9339         * gdbint.texinfo (Target Architecture Definition): Remove
9340         reference to TARGET_WRITE_SP.
9341
9342 2003-03-27  Andrew Cagney  <cagney@redhat.com>
9343
9344         * gdbint.texinfo (Target Architecture Definition): Remove
9345         references to write_sp.
9346
9347 2003-03-27  Andrew Cagney  <cagney@redhat.com>
9348
9349         * gdb.texinfo (GDB/MI Variable Objects): Replace @include with
9350         chapter body.  Use @smallexample instead of @example.
9351         (Annotations): Ditto.
9352         * Makefile.in (GDB_DOC_SOURCE_INCLUDES): Remove gdbmi.texinfo and
9353         annotate.texi.
9354
9355 2003-03-26  Andrew Cagney  <cagney@redhat.com>
9356
9357         * gdbint.texinfo (Target Architecture Definition): Replace
9358         PUSH_ARGUMENTS with push_dummy_call, add gdbarch, regcache and
9359         dummy_addr parameters.
9360
9361 2003-03-25  Andrew Cagney  <cagney@redhat.com>
9362
9363         * gdbint.texinfo (Target Architecture Definition): Delete
9364         reference to CALL_DUMMY_STACK_ADJUST_P.  Rename
9365         CALL_DUMMY_STACK_ADJUST to DEPRECATED_CALL_DUMMY_STACK_ADJUST.
9366         Add reference to PUSH_ARGUMENTS.
9367
9368 2003-03-23  Andrew Cagney  <cagney@redhat.com>
9369
9370         * gdbint.texinfo (Algorithms, Target Architecture Definition):
9371         Deprecate FRAME_CHAIN and FRAME_CHAIN_VALID.
9372
9373 2003-03-18  J. Brobecker  <brobecker@gnat.com>
9374
9375         * gdbint.texinfo (Algorithms): Add new section describing the
9376         Observer paradigm.
9377         (Top): Add menu entry to new observer appendix.
9378         * observer.texi: New file.
9379         * Makefile.in (GDBINT_DOC_SOURCE_INCLUDES): Add dependency on
9380         new observer.texi file.
9381
9382 2003-03-17  Andrew Cagney  <cagney@redhat.com>
9383
9384         * gdb.texinfo (DATE): Delete.  Remove date from titles.  Mention
9385         that GNU Press update the manual version number.
9386
9387 2003-03-12  Andrew Cagney  <cagney@redhat.com>
9388
9389         * gdbint.texinfo (Target Architecture Definition): Delete
9390         references to get_saved_register.  Rename GET_SAVED_REGISTER to
9391         DEPRECATED_GET_SAVED_REGISTER.
9392
9393 2003-03-13  Andrew Cagney  <cagney@redhat.com>
9394
9395         * gdbint.texinfo (Target Architecture Definition): Replace
9396         POP_FRAME with DEPRECATED_POP_FRAME.  Update description.
9397
9398 2003-03-12  Andrew Cagney  <cagney@redhat.com>
9399
9400         * gdbint.texinfo (Target Architecture Definition): Rename
9401         FRAME_SAVED_PC to DEPRECATED_FRAME_SAVED_PC.
9402
9403 2003-03-10  Corinna Vinschen  <vinschen@redhat.com>
9404
9405         * gdb.texinfo: Add File-I/O documentation.
9406
9407 2003-03-10  Andrew Cagney  <cagney@redhat.com>
9408
9409         * gdbint.texinfo (Target Architecture Definition): Cross reference
9410         FRAME_SAVED_PC to unwind_pc.  Document unwind_pc.
9411
9412 2003-03-07  Andrew Cagney  <cagney@redhat.com>
9413
9414         * gdb.texinfo (Debugging Output): Mention the "set/show debug
9415         frame" command.
9416
9417 2003-03-05  Andrew Cagney  <cagney@redhat.com>
9418
9419         * gdbint.texinfo (Target Architecture Definition): Document
9420         unwind_dummy_id.  Cross reference unwind_dummy_id and
9421         SAVE_DUMMY_FRAME_TOS.
9422
9423 2003-03-05  James Ingham <jingham@apple.com>
9424             Daniel Jacobowitz  <drow@mvista.com>
9425
9426         * gdb.texinfo (Configuring the current ABI): Document "set cp-abi"
9427         and "show cp-abi".
9428
9429 2003-03-03  Andrew Cagney  <cagney@redhat.com>
9430
9431         * gdbint.texinfo (Target Architecture Definition): Document
9432         register_type.
9433
9434 2003-03-03  Andrew Cagney  <cagney@redhat.com>
9435
9436         * stabs.texinfo (Structures): Use @samp and separate @var's
9437         instead of a single @var containing a comma separated list.
9438         (Unions): Ditto.
9439
9440 2003-03-02  Daniel Jacobowitz  <drow@mvista.com>
9441
9442         * Makefile.in (distclean): Remove config.log.
9443
9444 2003-03-01  Andrew Cagney  <cagney@redhat.com>
9445
9446         * gdbint.texinfo (Target Architecture Definition): Rename
9447         FRAME_INIT_SAVED_REGS to DEPRECATED_FRAME_INIT_SAVED_REGS.
9448
9449 2003-03-01  Andrew Cagney  <cagney@redhat.com>
9450
9451         * gdbint.texinfo: Rename INIT_EXTRA_FRAME_INFO to
9452         DEPRECATED_INIT_EXTRA_FRAME_INFO.
9453
9454 2003-02-23  Raoul Gough  <RaoulGough@yahoo.co.uk>
9455
9456         * gdb.texinfo (Cygwin Native): Links to Non-debug DLL symbols.
9457         (Non-debug DLL symbols): New node, describing the minimal symbols
9458         loaded from DLLs without real debugging symbols.
9459
9460 2003-02-20  Andrew Cagney  <ac131313@redhat.com>
9461
9462         * gdb.texinfo (Set Breaks): Add cross reference to "set remote
9463         hardware-breakpoint-limit".
9464         (Set Watchpoints): Add cross reference to "set remote
9465         hardware-watchpoint-limit".
9466         (Remote configuration options): New section.
9467
9468 2003-02-04  Andrew Cagney  <ac131313@redhat.com>
9469
9470         * gdbint.texinfo (Target Architecture Definition): Delete
9471         descrption of IS_TRAPPED_INTERNALVAR.
9472
9473         From Keith Seitz <keiths@redhat.com>:
9474         * gdb.texinfo (Interpreters): New chapter.  Refer the command-line
9475         option "-i"/"--interpreter" to this chapter.  Include index
9476         entries.
9477
9478 2003-02-04  David Carlton  <carlton@math.stanford.edu>
9479
9480         * gdb.texinfo (C@t{++}): Recommend DWARF 2, then stabs+.
9481         (Variables): Recommend stabs+ and DWARF 2.
9482         (C plus plus expressions): Correct info about
9483         compiler versions, debug formats.
9484         (Contributors): Change 'DWARF2' to 'DWARF 2'.
9485         PR symtab/874.
9486
9487 2003-02-01  Andrew Cagney  <ac131313@redhat.com>
9488
9489         * gdbint.texinfo (Target Architecture Definition): Delete
9490         description of ADDITIONAL_OPTIONS, ADDITIONAL_OPTION_CASES,
9491         ADDITIONAL_OPTION_HANDLER, and ADDITIONAL_OPTION_HELP, and
9492         BEFORE_MAIN_LOOP_HOOK, and DBX_PARM_SYMBOL_CLASS along with
9493         references to nindy and i960.
9494         * gdb.texinfo (i960): Delete all references to i960 and nindy.
9495
9496 2003-02-01  Andrew Cagney  <ac131313@redhat.com>
9497
9498         * gdbint.texinfo (Target Architecture Definition): Delete
9499         FLOAT_INFO.
9500
9501 2003-01-30  Andrew Cagney  <ac131313@redhat.com>
9502
9503         * stabs.texinfo (Member Type Descriptor): Clarify description of
9504         `@'.  Suggested by Ben Hutchings.
9505
9506 2003-01-29  Andrew Cagney  <ac131313@redhat.com>
9507
9508         * gdb.texinfo (M68K): Delete reference to es1800.
9509
9510 2003-01-29  Andrew Cagney  <ac131313@redhat.com>
9511
9512         * gdb.texinfo (Maintenance Commands): Document `maint print
9513         reggroups' and `maint print register-groups'.
9514         * gdbint.texinfo (Target Architecture Definition): Document
9515         register_reggroup_p.
9516
9517 2003-01-23  Jim Blandy  <jimb@redhat.com>
9518
9519         * gdb.texinfo (Separate Debug Files): New section.
9520
9521 2003-01-22  Daniel Jacobowitz  <drow@mvista.com>
9522
9523         * gdb.texinfo (Maintenance Commands): Add "maint set profile"
9524         and "maint show profile".
9525
9526 2003-01-16  Michael Chastain  <mec@shout.net>
9527
9528         * gdb.texinfo (Installing GDB): Warn against
9529         ".../gdb-VERSION/gdb/configure".
9530         (Separate Objdir): Likewise.
9531
9532 2003-01-15  Andrew Cagney  <ac131313@redhat.com>
9533
9534         * gdbint.texinfo (Target Architecture Definition): Delete
9535         definition of PRINT_REGISTER_HOOK.
9536
9537 2003-01-15  Elena Zannoni  <ezannoni@redhat.com>
9538
9539         (OpenRISC 1000): Fix formatting of command names.
9540
9541 2003-01-15  Elena Zannoni  <ezannoni@redhat.com>
9542
9543         * gdb.texinfo (Continuing and Stepping): Add new command
9544         'advance'. Clarify behavior of 'until'.
9545
9546 2003-01-13  Daniel Jacobowitz  <drow@mvista.com>
9547
9548         * gdb.texinfo (Files): Document solib-absolute-prefix and
9549         solib-search-path.
9550
9551 2003-01-09  Michael Chastain  <mec@shout.net>
9552
9553         * gdbint.texinfo (Configuring @value{GDBN} for Release): Delete.
9554         (Create a Release): Add new instructions for new @file{src-release}.
9555         Document existing instructions for @file{Makefile.in} as
9556         being for @value{GDBN} 5.3.1 or earlier.
9557
9558 2003-01-09  Andrew Cagney  <ac131313@redhat.com>
9559
9560         * gdbint.texinfo (Target Architecture Definition): Mention
9561         frame_saved_regs_zalloc and frame_extra_info_zalloc as the way to
9562         allocate memory.
9563
9564 2003-01-04  Daniel Jacobowitz  <drow@mvista.com>
9565
9566         * gdb.texinfo (Controlling GDB): Add @kindex for
9567         "show osabi".
9568         (Backtraces): Add @kindex's for backtrace-below-main.
9569
9570 2003-01-04  Daniel Jacobowitz  <drow@mvista.com>
9571
9572         * gdb.texinfo (Controlling GDB): Document "set osabi".
9573
9574 2003-01-04  Daniel Jacobowitz  <drow@mvista.com>
9575
9576         * gdb.texinfo (Backtraces): Document "set backtrace-below-main".
9577         * gdbint.texinfo (FRAME_CHAIN_VALID): Update documentation.
9578
9579 2003-01-04  Daniel Jacobowitz  <drow@mvista.com>
9580
9581         * gdb.texinfo (Controlling GDB): Add ABI section.  Document
9582         "set coerce-float-to-double".
9583         * gdbint.texinfo (COERCE_FLOAT_TO_DOUBLE): Remove documentation.
9584
9585 2003-01-02  Andrew Cagney  <ac131313@redhat.com>
9586
9587         * stabs.texinfo: Remove obsolete text.
9588         * gdbint.texinfo: Ditto.
9589         * gdb.texinfo: Ditto.
9590
9591 2002-12-22  Mark Kettenis  <kettenis@gnu.org>
9592
9593         * gdbint.texinfo (Target Architecture Definition): Update
9594         description of gdbarch_register_osabi.
9595
9596 2002-12-20  Kazu Hirata  <kazu@cs.umass.edu>
9597
9598         * agentexpr.texi: Fix typos.
9599         * annotate.texi: Likewise.
9600         * fdl.texi: Likewise.
9601
9602 2002-12-10  Andrew Cagney  <cagney@redhat.com>
9603
9604         * gdbint.texinfo (Algorithms): Replace INIT_FRAME_PC with
9605         DEPRECATED_INIT_FRAME_PC.
9606
9607 2002-12-01  Andrew Cagney  <ac131313@redhat.com>
9608
9609         * gdbint.texinfo (Target Architecture Definition): Delete
9610         PC_IN_CALL_DUMMY.
9611
9612 2002-11-28  Andrew Cagney  <ac131313@redhat.com>
9613
9614         * gdbint.texinfo (Host Definition): Delete documentation on
9615         USE_GENERIC_DUMMY_FRAMES.
9616
9617 2002-11-26  Elena Zannoni  <ezannoni@redhat.com>
9618
9619         Fix PR gdb/723 and PR gdb/245.
9620         * Makefile.in (install-info): Run the install-info command as part
9621         of the post install steps only.
9622         (uninstall-info): New target.
9623         (uninstall): New target.
9624
9625 2002-11-22  Elena Zannoni  <ezannoni@redhat.com>
9626
9627         * Makefile.in (install): Make install do some real work.
9628
9629 2002-11-19  Andrew Cagney  <ac131313@redhat.com>
9630
9631         Fix POSIX problem reported by Paul Eggert.
9632         * Makefile.in (GDBvn.texi): Use `sed q' instead of `head -1'.
9633         Fix PR gdb/527.
9634
9635 2002-10-26  Andrew Cagney  <cagney@redhat.com>
9636
9637         * gdbint.texinfo (Target Architecture Definition): Delete
9638         definition of DO_REGISTERS_INFO.
9639
9640 2002-10-18  Kevin Buettner  <kevinb@redhat.com>
9641
9642         * gdbint.texinfo (Address Classes): Fix problems with insertion
9643         of ``{'' and ``}'' in example.
9644
9645 2002-10-17  Kevin Buettner  <kevinb@redhat.com>
9646
9647         * gdbint.texinfo (Address Classes): New section.
9648         (Target Conditionals): Document ADDRESS_CLASS_NAME_TO_TYPE_FLAGS,
9649         ADDRESS_CLASS_NAME_TO_TYPE_FLAGS_P, ADDRESS_CLASS_TYPE_FLAGS,
9650         ADDRESS_CLASS_TYPE_FLAGS_P, ADDRESS_CLASS_TYPE_FLAGS_TO_NAME, and
9651         ADDRESS_CLASS_TYPE_FLAGS_TO_NAME_P.
9652
9653 2002-10-11  Klee Dienes  <kdienes@apple.com>
9654
9655         * gdb.texinfo (Registers): Mention vector registers as well as
9656         floating registers in the documentation for 'info registers' and
9657         'info all-registers'.
9658
9659 2002-10-11  Daniel Jacobowitz  <drow@mvista.com>
9660
9661         * gdbint.texinfo (CPLUS_MARKER): Remove item.
9662
9663 2002-10-03  Jeff Johnston  <jjohnstn@redhat.com>
9664
9665         * gdbint.texinfo (Item Output Functions): Add new ui_out_field_fmt_int
9666         interface definition.
9667
9668 2002-10-03  Marko Mlinar   <markom@opencores.org>
9669
9670         * gdb.texinfo (Target Commands): Add or1k target specific
9671         commands.
9672         * gdb.texinfo (Contributors): Add myself to the contributors list.
9673
9674 2002-10-01  Andrew Cagney  <ac131313@redhat.com>
9675
9676         * gdb.texinfo (Mode Options): Update --interpreter option.  "mi2"
9677         and "mi1" instead of "mi1" and "mi0".
9678
9679 2002-09-29  Hans-Peter Nilsson  <hp@bitrange.com>
9680
9681         * gdb.texinfo (Packets): Fix typos "alligned".
9682         Correct z3/Z3 description.  Correct z4/Z4 title.
9683
9684 2002-09-27  Andrew Cagney  <ac131313@redhat.com>
9685
9686         * all-cfg.texi: Use @sc for GDB and GCC.  Update copyright.
9687
9688 2002-09-25  Kevin Buettner  <kevinb@redhat.com>
9689
9690         * gdb.texinfo: Use GNU/Linux instead of Linux.
9691
9692 2002-09-25  Andrew Cagney  <ac131313@redhat.com>
9693
9694         * gdb.texinfo (Packets): Replace @samp{} with ``an empty string''.
9695
9696 2002-09-24  Andrew Cagney  <ac131313@redhat.com>
9697
9698         * gdb.texinfo: Replace @example with @smallexample.
9699
9700 2002-09-20  Kevin Buettner  <kevinb@redhat.com>
9701
9702         From Eli Zaretskii  <eliz@gnu.org>:
9703         * gdb.texinfo (Character Sets): Use @smallexample instead of
9704         @example.  Use GNU/Linux instead of Linux.
9705
9706 2002-09-20  Jim Blandy  <jimb@redhat.com>
9707
9708         * gdb.texinfo: Add character set documentation.
9709
9710 2002-09-19  Andrew Cagney  <ac131313@redhat.com>
9711
9712         * gdb.texinfo (Packets): Revise `z' and `Z' packet documentation.
9713         (Packets): Add cross reference from `b' packet to `z' packets.
9714
9715 2002-09-19  Andrew Cagney  <ac131313@redhat.com>
9716
9717         * gdb.texinfo (Maintenance Commands): Document ``maint
9718         internal-error'' and ``maint internal-warning''.
9719
9720         * gdbint.texinfo (Target Architecture Definition): Revise
9721         description of STACK_ALIGN.  Add description of FRAME_ALIGN.
9722
9723 2002-09-19  Joel Brobecker  <brobecker@gnat.com>
9724
9725         * gdbint.texinfo (Target Conditionals): Document the new
9726         NAME_OF_MALLOC macro.
9727
9728 2002-09-05  Andrew Cagney  <ac131313@redhat.com>
9729
9730         * gdb.texinfo (Contributors): Mention 5.2 and 5.3 release
9731         engineer.
9732
9733 2002-09-02  Stephane Carrez  <stcarrez@nerim.fr>
9734
9735         * gdb.texinfo (TUI Overview): Document status line fields.
9736
9737 2002-09-02  Stephane Carrez  <stcarrez@nerim.fr>
9738
9739         * gdb.texinfo (TUI Commands): Document info win command.
9740
9741 2002-09-01  Stephane Carrez  <stcarrez@nerim.fr>
9742
9743         * gdb.texinfo (TUI Overview): Document breakpoint markers.
9744
9745 2002-09-01  Stephane Carrez  <stcarrez@nerim.fr>
9746
9747         * gdb.texinfo (TUI Single Key Mode): Document new SingleKey mode.
9748         (TUI Keys): Likewise.
9749
9750 2002-08-25  Andrew Cagney  <ac131313@redhat.com>
9751
9752         * gdb.texinfo (Examples): Use ``->'' for a packet send and ``<-''
9753         for a packet receive.
9754
9755 2002-08-25  Andrew Cagney  <ac131313@redhat.com>
9756
9757         * Makefile.in (clean): Move to end of file.
9758         (distclean, maintainer-clean, realclean): Ditto.
9759         (mostlyclean): Move rule to end of file.  Use GDB_TEX_TMPS,
9760         GDBINT_TEX_TMPS, STABS_TEX_TMPS.
9761         (gdb.dvi, gdb.pdf): Do not cleanup TeX temp files after texi2dvi.
9762         (gdbint.dvi, gdbint.pdf, stabs.dvi, stabs.pdf): Ditto.
9763
9764 2002-08-24  Andrew Cagney  <ac131313@redhat.com>
9765
9766         * Makefile.in (GDBINT_TEX_TMPS): Define.
9767         (gdbint.dvi, gdbint.pdf): Use
9768         (GDB_TEX_TMPS): Define.
9769         (gdb.dvi, gdb.pdf): Use.
9770         (STABS_TEX_TMPS): Define.
9771         (stabs.dvi, stabs.pdf): Use.
9772         (GDB_DOC_SOURCE_INCLUDES): New macros.
9773         (GDB_DOC_BUILD_INCLUDES, GDB_DOC_FILES): New macros.
9774         (GDBINT_DOC_FILES_INCLUDES): New macros.
9775         (GDBINT_DOC_BUILD_INCLUDES): New macros.
9776         (GDBINT_DOC_FILES, STABS_DOC_SOURCE_INCLUDES): New macros.
9777         (STABS_DOC_BUILD_INCLUDES, STABS_DOC_FILES): New macros.
9778         (SFILES_DOC, SFILES_INCLUDED, SFILES_LOCAL): Delete macros.
9779         (links2roff): Replace SFILES_INCLUDED with
9780         GDB_DOC_SOURCE_INCLUDES.
9781         (gdb.dvi, gdb_toc.html, gdb.pdf, gdb.info): Update dependencies.
9782         (gdb.me, gdb.mm, gdb.ms): Update dependencies.
9783         (gdbint.dvi, gdbint_toc.html, gdbint.pdf, gdbint.info): Update
9784         dependencies.
9785         (stabs.info, stabs_toc.html, stabs.pdf, stabs.dvi): Update
9786         dependencies.
9787         (gdbmi.texinfo): Delete rule.
9788         (inc-hist.texinfo): Delete rule.
9789         (rluser.texinfo): Delete rule.
9790
9791 2002-08-23  Andrew Cagney  <cagney@redhat.com>
9792
9793         * gdbint.texinfo (Target Architecture Definition): Update
9794         STORE_RETURN_VALUE, mention regcache.
9795
9796 2002-08-21  Andrew Cagney  <ac131313@redhat.com>
9797
9798         * gdbint.texinfo (Target Architecture Definition): Document
9799         print_registers_info.  Note that DO_REGISTERS_INFO is deprecated.
9800
9801 2002-08-19  Andrew Cagney  <ac131313@redhat.com>
9802
9803         * gdb.texinfo (Remote Protocol): Reformat.  Use cross references.
9804         Fix minor typos.  Add index entries.
9805
9806 2002-08-18  Andrew Cagney  <ac131313@redhat.com>
9807
9808         * gdb.texinfo (Data): Add ``Vector Unit'' to menu.
9809
9810 2002-08-15  Andrew Cagney  <ac131313@redhat.com>
9811
9812         * gdbint.texinfo (Target Architecture Definition): Document
9813         PRINT_VECTOR_INFO.
9814         * gdb.texinfo (Vector Unit): Document "info vectors" command.
9815
9816 2002-08-13  Andrew Cagney  <ac131313@redhat.com>
9817
9818         * gdb.texinfo (Maintenance Commands): Document "maint print
9819         registers", "maint print raw-registers" and "maint print
9820         cooked-registers".
9821
9822 2002-08-08  Grace Sainsbury  <graces@redhat.com>
9823
9824         From Mark Salter:
9825         * gdb.texinfo (Protocol): Document T packet extension to
9826         allow watchpoint address reporting.
9827
9828 2002-08-03  Andrew Cagney  <ac131313@redhat.com>
9829
9830         * gdb.texinfo (Dump/Restore Files): Move `[]' to outside of @var.
9831
9832 2002-08-01  Andrew Cagney  <cagney@redhat.com>
9833
9834         * stabs.texinfo, gdb.texinfo, gdbint.texinfo: Obsolete references
9835         to CHILL.
9836
9837 2002-08-01  Andrew Cagney  <ac131313@redhat.com>
9838
9839         * gdbint.texinfo (Coding): Revise section "Include Files".
9840
9841 2002-07-24  Andrew Cagney  <cagney@redhat.com>
9842
9843         * gdbint.texinfo: Obsolete references to m88k.
9844         * gdb.texinfo: Ditto.
9845
9846 2002-07-10  Joel Brobecker  <brobecker@gnat.com>
9847
9848         * gdbint.texinfo (Create a release candiate): Add the location
9849         where the proper version of autoconf can be retrieved.
9850
9851 2002-07-09  Don Howard  <dhoward@redhat.com>
9852
9853         * gdb.texinfo (Command Files): Further describe the behavior of
9854         sourced command files.
9855
9856 2002-06-27  Andrew Cagney  <ac131313@redhat.com>
9857
9858         * gdbint.texinfo (User Interface): ISO C rather than ISO-C.
9859         (Coding): Clarify ISO C version that GDB assumes.
9860
9861 2002-06-26  Tom Tromey  <tromey@redhat.com>
9862
9863         * gdbint.texinfo (User Interface): Mention add_setshow_cmd and
9864         add_setshow_cmd_full.
9865
9866 2002-06-25  Don Howard  <dhoward@redhat.com>
9867
9868         * gdb.texinfo (Memory Region Attributes): Document new behavior
9869         for 'mem' command.
9870
9871 2002-06-11  Jim Blandy  <jimb@redhat.com>
9872
9873         * gdb.texinfo (Symbols): Update documentation for `info source'
9874         command.
9875
9876         * gdb.texinfo (Macros): Call the command `info macro', not
9877         `show macro'.
9878
9879 2002-06-09  Andrew Cagney  <ac131313@redhat.com>
9880
9881         * gdbint.texinfo (Coding): Add section ``Per-architecture module
9882         data''.
9883
9884 2002-06-09  Mark Kettenis  <kettenis@gnu.org>
9885
9886         * gdbint.texinfo (Target Architecture Definition): Document
9887         GDB_OSABI_GO32 and GDB_OSABI_NETWARE.
9888
9889 2002-06-08  Andrew Cagney  <ac131313@redhat.com>
9890
9891         * gdbint.texinfo (Releasing GDB): Fix typos in @itemize @bullet
9892         lists.
9893
9894 2002-06-08  Andrew Cagney  <ac131313@redhat.com>
9895
9896         * gdbint.texinfo (Releasing GDB): Revise the section ``Cut the
9897         Branch''.
9898
9899 2002-06-01  Andrew Cagney  <ac131313@redhat.com>
9900
9901         * gdbint.texinfo (Target Architecture Definition): Add section
9902         ``Converting an existing Target Architecture to Multi-arch''.
9903
9904 2002-05-30  Andrew Cagney  <ac131313@redhat.com>
9905
9906         * gdbint.texinfo (Releasing GDB): Rename ``Obsoleting any code''
9907         to ``Obsoleting code''.  Revise.
9908
9909 2002-05-17  Jim Blandy  <jimb@redhat.com>
9910
9911         * gdb.texinfo (C Preprocessor Macros): New chapter.
9912         Include it in the main menu.
9913         (Contributors): Credit Jim Blandy with macro support.
9914         (Compilation): Explain how to get macro information into the
9915         executable.
9916         (Expressions): Note that preprocessor macros are expanded.
9917
9918 2002-05-14  Daniel Jacobowitz  <drow@mvista.com>
9919
9920         * gdb.texinfo (Debug Session): Document new `udp:' and `tcp:'
9921         options for `target remote'.
9922
9923 2002-05-13  Andrew Cagney  <ac131313@redhat.com>
9924
9925         * gdbint.texinfo (Target Architecture Definition): Delete
9926         documentation on NNPC_REGNUM.
9927
9928 2002-05-11  Andrew Cagney  <ac131313@redhat.com>
9929
9930         * gdbint.texinfo (Target Architecture Definition): Document
9931         REGISTER_TO_VALUE and VALUE_TO_REGISTER and CONVERT_REGISTER_P.
9932         (Target Architecture Definition): Revise section `Using Different
9933         Register and Memory Data Representations'.  Add section `Raw and
9934         Virtual Register Representations'.
9935
9936 2002-05-11  Andrew Cagney  <ac131313@redhat.com>
9937
9938         * gdbint.texinfo (Target Architecture Definition): Mention
9939         defaults for REGISTER_VIRTUAL_SIZE and REGISTER_RAW_SIZE.
9940         (Target Architecture Definition): Mention same.  Add references to
9941         web pages.
9942
9943 2002-05-08  Michael Snyder  <msnyder@redhat.com>
9944
9945         * stabs.texinfo (Attributes): Document new "vector" attribute.
9946
9947 2002-05-04  Andrew Cagney  <ac131313@redhat.com>
9948
9949         * gdbint.texinfo (Releasing GDB): Revise `Create a Release'.
9950
9951 2002-05-04  Andrew Cagney  <ac131313@redhat.com>
9952
9953         * gdb.texinfo: Delete obsolete references to a29k.
9954
9955 2002-04-24  Andrew Cagney  <ac131313@redhat.com>
9956
9957         * gdbint.texinfo (Target Architecture Definition): Replace
9958         IN_SIGTRAMP with PC_IN_SIGTRAMP.
9959
9960 2002-04-24  David S. Miller  <davem@redhat.com>
9961
9962         * gdbint.texinfo (REGISTER_IN_WINDOW): Delete definition.
9963
9964 2002-04-21  David S. Miller  <davem@redhat.com>
9965
9966         * gdbint.texinfo (SKIP_PROLOGUE_FRAMELESS_P): Delete definition.
9967
9968 2002-04-21  Andrew Cagney  <ac131313@redhat.com>
9969
9970         * gdbint.texinfo (Target Architecture Definition): Delete
9971         definition of HAVE_REGISTER_WINDOWS.
9972
9973 2002-04-19  Eli Zaretskii  <eliz@gnu.org>
9974
9975         * gdbint.texinfo (Releasing GDB, Coding): Fix typos.  Reported by
9976         "Theodore A. Roth" <troth@verinet.com>.
9977
9978 2002-04-15  Don Howard  <dhoward@redhat.com>
9979
9980         From Eli Zaretskii <eliz@gnu.org>
9981         * gdb.texinfo (show max-user-call-depth): Correct formatting.
9982         Provide a better explaination of this feature.
9983
9984 2002-04-14  Andrew Cagney  <ac131313@redhat.com>
9985
9986         * gdbint.texinfo (Target Architecture Definition): Remove
9987         FRAME_CHAIN_COMBINE.
9988
9989 2002-04-12  Michael Chastain  <mec@shout.net>
9990
9991         * gdbint.texinfo (Obsolete Conditionals): Remove reference to
9992         REG_STACK_SEGMENT.
9993
9994 2002-04-09  Michael Chastain  <mec@shout.net>
9995
9996         * gdbint.texinfo (Obsolete Conditionals): Remove references to
9997         PYRAMID_* macros.
9998
9999 2002-04-07  Andrew Cagney  <ac131313@redhat.com>
10000
10001         * gdb.texinfo (Bug Reporting): Document that the web is the
10002         prefered way of submitting bug reports.
10003         (Bug Reporting): Delete the s-mail address as the last resort.
10004
10005 2002-04-05  Andrew Cagney  <ac131313@redhat.com>
10006
10007         * gdbint.texinfo (Target Architecture Definition): Delete
10008         references to TARGET_WRITE_FP and write_fp.
10009
10010 2002-03-27  Michael Snyder  <msnyder@redhat.com>
10011
10012         * gdb.texinfo: Document new commands dump, append, and restore.
10013
10014 2002-03-27  Andrew Cagney  <ac131313@redhat.com>
10015
10016         * gdbint.texinfo (Releasing GDB): Revise the section `Before the
10017         Branch'.
10018
10019 2002-03-18  Andrew Cagney  <ac131313@redhat.com>
10020
10021         * gdb.texinfo: Change all examples to @smallexample.
10022         * gdbint.texinfo: Ditto.
10023
10024 2002-03-18  Andrew Cagney  <ac131313@redhat.com>
10025
10026         * gdbint.texinfo (Releasing GDB): Add section ``Versions and
10027         Branches''.
10028
10029 2002-03-18  Andrew Cagney  <ac131313@redhat.com>
10030
10031         * gdbint.texinfo (Releasing GDB): Add the section``Branch Commit
10032         Policy''.
10033
10034 2002-03-04  Fred Fish  <fnf@redhat.com>
10035
10036         * gdbint.texinfo: Fix a bunch of typos (alsways, mirrorred,
10037         expresson, suports, dependant, trhe, perhaphs, situtations,
10038         explictily, taged, oportunity, unfortunatly).
10039
10040 2002-02-24  Andrew Cagney  <ac131313@redhat.com>
10041
10042         * Makefile.in (gdb.info): Add explicit path to gdb.texinfo.
10043         Remove reference to 3.12.
10044
10045 2002-02-23  Andrew Cagney  <ac131313@redhat.com>
10046
10047         * gdbint.texinfo: Include fdl.texi.
10048         (Top): Add GNU Free Documentation License.
10049         * Makefile.in (SFILES_INCLUDED): Add gpl.texi.
10050         (gdbint.dvi, gdbint.pdf, gdbint.info): Add dependency on fdl.texi.
10051         (gdbint_toc.html): Add dependency on gdb-cfg.texi and fdl.texi.
10052         (gdbint.info): Add srcdir to include path.
10053         * gdb.texinfo: Include gpl.texi.
10054         (Top): Add Copying.
10055         * gpl.texi: New file.
10056
10057 2002-02-23  Andrew Cagney  <ac131313@redhat.com>
10058
10059         * gdbint.texinfo (Debugging GDB): Remove references to cygnus.com.
10060
10061 2002-02-19  Pierre Muller  <muller@ics.u-strasbg.fr>
10062
10063         * gdb.texinfo: Document Cygwin native specific commands.
10064
10065 2002-02-15  Daniel Jacobowitz  <drow@mvista.com>
10066
10067         * gdb.texinfo: Document gdbserver ``--attach'' command.
10068
10069 2002-02-07  Michael Snyder  <msnyder@redhat.com>
10070
10071         * gdb.texinfo (overlays): Change @var(_ovly_debug_event)
10072         to @code(_ovly_debug_event).
10073
10074 2002-02-07  Andrew Cagney  <ac131313@redhat.com>
10075
10076         * gdb.texinfo (How Overlays Work): Shrink the overlay diagram.
10077
10078 2002-02-06  Michael Snyder  <msnyder@redhat.com>
10079
10080         * gdb.texinfo (overlays): Mention new magic symbol
10081         '_ovly_debug_event', which allows GDB to keep better track
10082         of overlays.
10083
10084 2002-02-03  Eli Zaretskii  <eliz@gnu.org>
10085
10086         * gdb.texinfo (Memory Region Attributes): Fix the wording.
10087         Suggested by Dmitry Sivachenko.
10088
10089         * (<many nodes>): Fix the spelling and punctuation of "i.e.".
10090
10091 2002-02-01  Michael Snyder  <msnyder@redhat.com>
10092
10093         * gdb.texinfo (set trust-readonly): Change value{gdbn} to value{GDBN}.
10094
10095 2002-01-30  Michael Snyder  <msnyder@redhat.com>
10096
10097         * gdb.texinfo: (remote protocol): Gramatical fix-up.
10098         (set trust-readonly-sections): Document.
10099
10100 2002-01-29  Andrew Cagney  <ac131313@redhat.com>
10101
10102         * gdbint.texinfo (Releasing GDB): Revise and update.
10103
10104 2002-01-28  Andrew Cagney  <ac131313@redhat.com>
10105
10106         * gdbint.texinfo (Target Architecture Definition): Delete
10107         description of TARGET_BYTE_ORDER_DEFAULT.
10108
10109 2002-01-27  Eli Zaretskii  <eliz@gnu.org>
10110
10111         * gdb.texinfo: Fix typos and markup.  From Dmitry Sivachenko
10112         <mitya@cavia.pp.ru>.
10113
10114 2002-01-23  Andrew Cagney  <ac131313@redhat.com>
10115
10116         * libgdb.texinfo: Delete file.
10117
10118 2002-01-22  Andrew Cagney  <ac131313@redhat.com>
10119
10120         * gdb.texinfo: Remove makeinfo 3.12 hacks.
10121         * gdbint.texinfo: Ditto.
10122
10123 Tue Jan 22 11:57:38 2002  Andrew Cagney  <cagney@redhat.com>
10124
10125         * gdb.texinfo: Fix typo ``Remove' -> ``Remote''.
10126
10127 2002-01-22  Andrew Cagney  <ac131313@redhat.com>
10128
10129         * Makefile.in: Update copyright.
10130         (TEXI2DVI): Define.
10131         (gdb.dvi, gdb.pdf, stabs.dvi, stabs.pdf): Use TEXI2DVI.
10132         (gdbint.dvi, gdbint.pdf): Use TEXI2DVI.  Add dependency on
10133         gdb-cfg.texi.
10134         (TEXINDEX, PDFTEX): Delete makefile variables.
10135
10136 2002-01-22  Andrew Cagney  <ac131313@redhat.com>
10137
10138         * gdb.texinfo (Protocol): Move section to appendix.
10139
10140 2002-01-21  Andrew Cagney  <ac131313@redhat.com>
10141
10142         * gdb.texinfo (Remote Debugging): Create a menu.
10143         (Top): Add ``Remote Debugging'' to menu.
10144
10145 2002-01-21  Andrew Cagney  <ac131313@redhat.com>
10146
10147         * gdb.texinfo (Remote): Move the sub-section ``The GDB remote
10148         serial protocol'' from here.
10149         (Remote Debugging): To here.  New chapter.
10150
10151 2002-01-20  Andrew Cagney  <ac131313@redhat.com>
10152
10153         * gdbint.texinfo (Target Architecture Definition): Delete
10154         description of TARGET_BYTE_ORDER_SELECTABLE_P.
10155
10156 2002-01-20  Andrew Cagney  <ac131313@redhat.com>
10157
10158         * gdbint.texinfo (Host Definition): Revise.  xm-xyz.h and xyz.mh
10159         are no longer needed.
10160         (Porting GDB): Add maintainer note about configure.host.
10161
10162 2002-01-20  Andrew Cagney  <ac131313@redhat.com>
10163
10164         * gdbint.texinfo (Target Architecture Definition): Remove
10165         definition of IEEE_FLOAT.
10166
10167 2002-01-20  Eli Zaretskii  <eliz@gnu.org>
10168
10169         * gdb.texinfo: Beautify copyright years; fix a typo.
10170         (DJGPP Native): Fix overfull hboxes in examples.  From Brian Youmans
10171         <3diff@gnu.org>
10172
10173 2002-01-19  Andrew Cagney  <ac131313@redhat.com>
10174
10175         * gdbint.texinfo (Host Definition): Remove references to
10176         MALLOC_INCOMPATIBLE.
10177
10178 2002-01-17  Andrew Cagney  <ac131313@redhat.com>
10179
10180         * gdbint.texinfo (Host Definition): Remove references to XDEPFILES
10181         and xyz-xdep.o.
10182
10183 2002-01-17  Andrew Cagney  <ac131313@redhat.com>
10184
10185         * gdb.texinfo (Maintenance Commands): Add appendix.
10186         (Set Breaks): Copy ``maint info breakpoint'' doco to
10187         ``Maintenance Commands'' appendix.  Add reference.
10188
10189 2002-01-17  Andrew Cagney  <ac131313@redhat.com>
10190
10191         * fdl.texi: Remove next/prev from @node.
10192
10193 2002-01-17  Eli Zaretskii  <eliz@gnu.org>
10194
10195         * gdb.texinfo: @include fdl.texi.  Fixes for overfull hboxes and
10196         for monstrous @multitable (from Brian Youmans).
10197
10198         * fdl.texi: New file.
10199
10200         * Makefile.in (SFILES_INCLUDED): Add fdl.texi.
10201
10202 2002-01-15  Andrew Cagney  <ac131313@redhat.com>
10203
10204         * gdbint.texinfo (Releasing GDB): New chapter.
10205
10206 2002-01-14  Andrew Cagney  <ac131313@redhat.com>
10207
10208         * gdb.texinfo (Embedded Processors, Calling program functions):
10209         Obsolete references to a29k.
10210
10211 2002-01-13  Andrew Cagney  <ac131313@redhat.com>
10212
10213         * gdbint.texinfo (Coding): Review Cleanups section.  Examples
10214         examples.  Document that a code-block should do or discard its
10215         cleanups before exit.
10216
10217 2002-01-11  Michael Snyder  <msnyder@redhat.com>
10218
10219         * gdb.texinfo (Choosing files): Change @samp to @file.
10220
10221 2002-01-05  Michael Snyder  <msnyder@redhat.com>
10222
10223         * gdb.texinfo (--pid): Document new command line option (attach).
10224
10225 2002-01-07  Eli Zaretskii  <eliz@gnu.org>
10226
10227         * gdb.texinfo (Tracepoints): Clarify that tracepoints need support
10228         in the stub.
10229
10230 2002-01-04  Andrew Cagney  <ac131313@redhat.com>
10231
10232         * gdbint.texinfo (Target Architecture Definition): Replace
10233         BIG_ENDIAN with BFD_ENDIAN_BIG.
10234
10235 2002-01-03  Andrew Cagney  <ac131313@redhat.com>
10236
10237         * gdbint.texinfo (Target Architecture Definition): Replace
10238         value_ptr with struct value pointer.
10239
10240 2002-01-02  Eli Zaretskii  <eliz@gnu.org>
10241
10242         * gdb.texinfo (Free Software): Fix wording.
10243
10244 2001-12-31  Eli Zaretskii  <eliz@gnu.org>
10245
10246         * gdb.texinfo (Free Software): New section ``Free Software Needs
10247         Free Documentation''.
10248
10249 2001-12-30  Eli Zaretskii  <eliz@gnu.org>
10250
10251         * stabs.texinfo:
10252         * gdb.texinfo:
10253         * gdbint.texinfo:
10254         * libgdb.texinfo:
10255         * annotate.texi: Fix the application of GFDL in the Copyright notice.
10256
10257 2001-12-29  Michael Snyder  <msnyder@redhat.com>
10258
10259         * gdb.texinfo (maint info sections): Fix typo.
10260
10261 2001-12-26  Michael Snyder  <msnyder@redhat.com>
10262
10263         * gdb.texinfo (maint info sections): Document.
10264
10265         * gdb.texinfo (info proc): Comment out documentation for
10266         'info proc' sub-options that are currently not implemented.
10267
10268 2001-12-20  Jim Blandy  <jimb@redhat.com>
10269
10270         * gdbint.texinfo (TARGET_CHAR_SIGNED): Document.
10271
10272 2001-12-15  Andrew Cagney  <ac131313@redhat.com>
10273
10274         * gdbint.texinfo (Target Architecture Definition): Replace
10275         LITTLE_ENDIAN with BFD_ENDIAN_LITTLE.
10276
10277 2001-12-01  Andrew Cagney  <ac131313@redhat.com>
10278
10279         * gdbint.texinfo (Host Definition): Delete documentation on
10280         HOST_BYTE_ORDER.
10281
10282 2001-11-30  Jim Blandy  <jimb@redhat.com>
10283
10284         * gdb.texinfo (Overlays): New chapter, documenting GDB's
10285         overlay support.  Add to top-level menu.
10286
10287 2001-11-26  Tom Tromey  <tromey@redhat.com>
10288
10289         * gdb.texinfo (Command Syntax): Document C-o binding.
10290
10291 2001-07-26  Christopher Faylor  <cgf@redhat.com>
10292
10293         * gdb.texinfo (Options): Eliminate attempt to explain .gdbinit/gdb.ini
10294         use since it is described in the referenced section.
10295
10296         From Eli Zaretskii <eliz@gnu.org>
10297         * gdb.texinfo (Command Files): Reword to make gdb.ini requirement
10298         clearer when using DJGPP.
10299
10300 2001-11-24  Christopher Faylor  <cgf@redhat.com>
10301
10302         * gdb.texinfo (File Options): Change description of -nx and gdb.ini to
10303         specifically refer to MS-DOS.
10304         (command files): Mention gdb.ini is only used on MS-DOS.
10305
10306 2001-11-21  Tom Tromey  <tromey@redhat.com>
10307
10308         * gdb.texinfo (Invoking GDB): Document --args.
10309         (Mode Options): Likewise.
10310
10311 2001-11-21  Jim Blandy  <jimb@redhat.com>
10312
10313         * gdbint.texinfo (TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT):
10314         Delete documentation; this macro has been removed from the
10315         sources.
10316
10317 2001-11-13  Jim Blandy  <jimb@redhat.com>
10318
10319         * gdbint.texinfo (COERCE_FLOAT_TO_DOUBLE): Clarify.
10320
10321 2001-11-06  Corinna Vinschen  <vinschen@redhat.com>
10322
10323         * gdb.texinfo (gdbarch_in_function_epilogue_p): Add documentation.
10324
10325 2001-11-05  Michael Snyder  <msnyder@redhat.com>
10326
10327         * gdb.texinfo (info functions): Document use of backslash to
10328         quote regexp chars in function names such as "operator*()".
10329
10330 2001-11-01  Fred Fish  <fnf@redhat.com>
10331
10332         * gdbint.texinfo (SOLIB_ADD): Document additional new
10333         "readsyms" arg.
10334
10335 2001-10-30  Don Howard  <dhoward@redhat.com>
10336
10337         * gdb.texinfo: (Command Files) Added documentation for the
10338         behavior of gdb with input redirected from a file.
10339
10340 2001-10-28  Fred Fish  <fnf@redhat.com>
10341
10342         * gdb.texinfo (auto-solib-add): Change docs to match
10343         implementation change.
10344         (auto-solib-limit): Add docs for new variable.
10345
10346 2001-10-15  Andrew Cagney  <ac131313@redhat.com>
10347
10348         * gdbint.texinfo (Target Architecture Definition): Function
10349         value_as_pointer renamed to value_as_address.
10350
10351 2001-10-15  Andrew Cagney  <ac131313@redhat.com>
10352
10353         * gdbint.texinfo (Target Architecture Definition): Default
10354         POINTER_TO_ADDRESS functions assume unsigned addresses.
10355         (INTEGER_TO_ADDRESS): Document.  Derive pragmatics section from a
10356         posting by Jim Blandy.
10357
10358 2001-10-12  Jim Blandy  <jimb@redhat.com>
10359
10360         * Makefile.in (MAKEHTMLFLAGS): Remove -glossary; the most recent
10361         version of texi2html (1.64) doesn't support this flag any more.
10362
10363 2001-09-08  Mark Kettenis  <kettenis@gnu.org>
10364
10365         * gdbint.texinfo (Host Definition): Remove description of
10366         MEM_FNS_DECLARED.
10367
10368         * gdbint.texinfo (Host Definition): Remove description of R_OK.
10369
10370         * gdbint.texinfo (Host Definition): Remove description of
10371         HAVE_SIGSETMASK.
10372
10373 2001-09-04  Elena Zannoni  <ezannoni@redhat.com>
10374
10375         * gdbint.texinfo (Target Architecture Definition): Add
10376         explanation of TARGET_PRINT_INSN macro.
10377
10378 2001-08-30  Jim Blandy  <jimb@redhat.com>
10379
10380         * gdb.texinfo (`add-symbol-file'): Correct synopsis.
10381         Explain what it means to load relocatable files.
10382
10383 2001-08-28  Jim Blandy  <jimb@redhat.com>
10384
10385         * gdbint.texinfo: Bring the HTML `top' menu into sync with the
10386         info `top' menu.
10387
10388 Wed Aug 15 10:47:28 2001  Christopher Faylor <cgf@cygnus.com>
10389
10390         * gdbint.texinfo: Add a cautionary note about macro use.
10391
10392 2001-08-02  Corinna Vinschen  <vinschen@redhat.com>
10393
10394         * gdb.texinfo: Explain omitting the hostname in the
10395         `target remote' command.
10396
10397 2001-07-30  Daniel Jacobowitz  <drow@mvista.com>
10398
10399         * gdbint.texinfo: Remove extraneous START-INFO-DIR-ENTRY
10400         and END-INFO-DIR-ENTRY.
10401
10402 2001-07-28  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
10403
10404         * gdb.texinfo (TUI Configuration): Rename tui configuration variables.
10405
10406 2001-07-25  Andrew Cagney  <ac131313@redhat.com>
10407
10408         * gdbint.texinfo (libgdb): Rewrite.
10409
10410 2001-07-26  Eli Zaretskii  <eliz@gnu.org>
10411
10412         * Makefile.in (gdbgui.dvi, gdb-gui, gdbgui.info): Targets deleted.
10413
10414 2001-07-24  Stephane Carrez  <Stephane.Carrez@worldnet.fr>
10415
10416         * gdb.texinfo (TUI): New chapter, document the TUI.
10417         (Mode Options): Document the -tui option.
10418
10419 2001-07-23  Mark Kettenis  <kettenis@gnu.org>
10420
10421         * gdbint.texinfo (Host Definition): Remove description of
10422         NEED_POSIX_SETPGID.
10423
10424 2001-07-23  Eli Zaretskii  <eliz@gnu.org>
10425
10426         * gdb.tex (DJGPP Native): New node, with descriptions of
10427         DJGPP-specific commands.
10428
10429 2001-07-19  John R. Moore  <jmoore@redhat.com>
10430
10431         * gdbint.texinfo: Three misspellings.
10432
10433 2001-07-06  Andrew Cagney  <ac131313@redhat.com>
10434
10435         * Makefile.in (refcard.dvi): Rewrite to avoid problems with empty
10436         `test` expressions on bash.  Problem reported by Colin Walters.
10437
10438 2001-07-04  Andrew Cagney  <ac131313@redhat.com>
10439
10440         * gdbint.texinfo (User Interface): Update ui-out documentation to
10441         refelect recent UI/MI updates.
10442
10443 2001-07-04  Andrew Cagney  <ac131313@redhat.com>
10444
10445         * gdb.texinfo (Mode Options): Mention the mi0 and mi1
10446         interpreters.
10447
10448 2001-06-15  Andrew Cagney  <ac131313@redhat.com>
10449
10450         * gdbint.texinfo (Target Architecture Definition): GDBARCH is a C
10451         structure and not macros.
10452         (Host Definition): Document that much of this chapter is obsolete.
10453         (Target Architecture Definition): Update list of files that make
10454         up a target architecture.
10455         (Coding): Update.
10456
10457 2001-06-28  Andrew Cagney  <ac131313@redhat.com>
10458
10459         * gdbint.texinfo (Target Architecture Definition): Update
10460         EXTRACT_STRUCT_VALUE_ADDRESS and EXTRACT_STRUCT_VALUE_ADDRESS_P.
10461         The latter has been changed to a true predicate.
10462
10463 2001-06-17  Eli Zaretskii  <eliz@gnu.org>
10464
10465         * annotate.texi: Add @noindent where needed.  From Dmitry
10466         Sivachenko <dima@Chg.RU>.
10467         * gdb.texinfo: Indexing fix.  From Dmitry Sivachenko.
10468
10469 2001-06-16  Andrew Cagney  <ac131313@redhat.com>
10470
10471         * gdb.texinfo (Protocol): Fix typo.  Extra parenthesis.
10472
10473 2001-06-14  Andrew Cagney  <ac131313@redhat.com>
10474
10475         * gdb.texinfo (Remote Protocol): Document that the ``!'' packet
10476         returns ``OK''.  Document that the ``R'' packet does not reply.
10477
10478 2001-06-13  Michael Snyder  <msnyder@redhat.com>
10479
10480         * gdb.texinfo (Protocol): Add doc for new packet "qSymbol:".
10481
10482 2001-06-13  Eli Zaretskii  <eliz@gnu.org>
10483
10484         * gdb.texinfo (Signals): Clarify the default setting of signal
10485         handling.
10486
10487 2001-05-14  Andrew Cagney  <ac131313@redhat.com>
10488
10489         * gdbint.texinfo (CLEAR_DEFERRED_STORES): Delete stray @item
10490         (FRAME_ARGS_ADDRESS_CORRECT): Ditto.
10491
10492 2001-05-12  Andrew Cagney  <ac131313@redhat.com>
10493
10494         * Makefile.in (GDBvn.texi): Set GDBVN from ../version.in.
10495
10496 2001-05-10  Eli Zaretskii  <eliz@gnu.org>
10497
10498         * gdbint.texinfo (Clean Design and Portable Implementation):
10499         Renamed from "Clean Design".
10500         (Clean Design and Portable Implementation): Document portable
10501         methods of handling file names, and the associated macros.
10502
10503 2001-04-02  Eli Zaretskii  <eliz@gnu.org>
10504
10505         * gdb.texinfo (Tracepoint Actions): Mention the "info scope"
10506         command and provide a cross-reference to its description.
10507         (Symbols): Note that "info scope" is useful for trace experiments.
10508
10509 2001-04-01  Eli Zaretskii  <eliz@gnu.org>
10510
10511         * gdb.texinfo (Symbols): Document "info scope".
10512         (Tracepoints): New chapter.
10513         (Contributors): Update for v5.1.
10514         <All nodes>: Change "C++" to "C@t{++}".
10515
10516         * gdbint.texinfo (User Interface): A new section about ui_out
10517         functions, based on text written by Fernando Nasser.
10518
10519         * stabs.texinfo: Change Permissions to GFDL.  Update Copyright.
10520
10521 2001-03-26  Eli Zaretskii  <eliz@gnu.org>
10522
10523         * gdb.texinfo: Change Permissions to GFDL.  Update Copyright.
10524
10525         * gdbint.texinfo: Change Permissions to GFDL.  Update Copyright.
10526
10527         * gdbgui.texinfo: Change Permissions to GFDL.  Update Copyright.
10528         Replace "GDB" with "@value{GDBN}".  Fix markup.
10529
10530         * annotate.texi: Change Permissions to GFDL.  Update Copyright.
10531
10532         * gdb.texinfo (Output Formats): Mention "info symbol" and provide
10533         a cross-reference to its description.
10534         (Symbols): Document "info symbol".
10535
10536 2001-03-21  Eli Zaretskii  <eliz@gnu.org>
10537
10538         * gdbint.texinfo (Algorithms): New section "Watchpoints" and new
10539         subsection "x86 Watchpoints".
10540         (Target Architecture Definition): Document the macros
10541         I386_USE_GENERIC_WATCHPOINTS and TARGET_HAS_HARDWARE_WATCHPOINTS.
10542         (Native Debugging): Document I386_USE_GENERIC_WATCHPOINTS.
10543
10544 2001-03-20  Andrew Cagney  <ac131313@redhat.com>
10545
10546         * gdbint.texinfo (Target Architecture Definition): Update
10547         definition of SOFTWARE_SINGLE_STEP_P to include empty parameter
10548         list.
10549
10550 2001-03-06  Kevin Buettner  <kevinb@redhat.com>
10551
10552         * Makefile.in, all-cfg.texi, annotate.texi, gdb.texinfo,
10553         gdbint.texinfo, refcard.tex: Update/correct copyright notices.
10554
10555 2001-02-21  Eli Zaretskii  <eliz@gnu.org>
10556
10557         * gdb.texinfo (Signals): Document "ignore", "noignore", and "all".
10558
10559 2001-02-11  Eli Zaretskii  <eliz@gnu.org>
10560
10561         * gdb.texinfo (Environment): Document that `path' does not change
10562         the value of PATH in GDB's own environment (it did in the past,
10563         but that was changed on March 15, 1994).  Reported by Doug Evans
10564         <dje@transmeta.com>.
10565
10566         * gdbint.texinfo: Fix up @itemize lists so that @item is alone on
10567         its line.  Fix markup of commands and macros.  Add an Index node
10568         and index entries.
10569
10570 2001-01-23  J.T. Conklin  <jtc@redback.com>
10571
10572         * gdb.texinfo (Memory region attributes): New manual section.
10573
10574 2001-01-04  Nicholas Duffek  <nsd@redhat.com>
10575
10576         * gdbint.texinfo (POP_FRAME): Document use by return_command.
10577
10578 2000-12-25  Eli Zaretskii  <eliz@gnu.org>
10579
10580         * refcard.tex: Version and copyright fixed.  From Phil Edwards
10581         <pedwards@disaster.jaj.com>.
10582
10583 Thu Nov 30 16:57:19 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10584
10585         * gdbint.texinfo (ECOFF_REG_TO_REGNUM, DWARF_REG_TO_REGNUM,
10586         DWARF2_REG_TO_REGNUM): Document.
10587
10588 Mon Nov 20 21:29:35 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10589
10590         * gdbint.texinfo (Coding): Update current value of
10591         --enable-build-warnings.  Mention --enable-gdb-build-warnings.
10592
10593 2000-11-19  Eli Zaretskii  <eliz@gnu.org>
10594
10595         * gdb.texinfo (Continuing and Stepping):  Fixed markup and typos,
10596         as suggested by Dmitry Sivachenko <dima@Chg.RU>.
10597
10598 2000-11-10  Christopher Faylor <cgf@cygnus.com>
10599
10600         * gdb.texinfo: Document new 'set step-mode' command.
10601
10602 2000-10-16  Eli Zaretskii  <eliz@gnu.org>
10603
10604         * gdb.texinfo (Contributors, MIPS Embedded): Minor spelling
10605         changes from Dmitry Sivachenko <dima@Chg.RU>.
10606
10607 2000-09-26  Eli Zaretskii  <eliz@gnu.org>
10608
10609         * gdb.texinfo (Hooks): Document the new post-hook functionality.
10610         From Steven Johnson <sbjohnson@ozemail.com.au>.
10611
10612 2000-08-10  Mark Kettenis  <kettenis@gnu.org>
10613
10614         * gdbint.texinfo (Overall Structure): Spelling fix.
10615
10616 2000-08-10  Eli Zaretskii  <eliz@gnu.org>
10617
10618         * gdbint.texinfo (Target Architecture Definition): Document that
10619         REGISTER_CONVERT_TO_VIRTUAL should only be called on a register
10620         for which REGISTER_CONVERTIBLE returns a zero value.
10621
10622 2000-07-08  Christopher Faylor <cgf@cygnus.com>
10623
10624         * Makefile.in (install-info): Find files to install in either the
10625         build or source directories (adapted from Makefile.am).
10626
10627 2000-07-07  Nicholas Duffek  <nsd@redhat.com>
10628
10629         * stabs.texinfo: Fix spelling errors.
10630         (String Field): FILE-NUMBER starts from 0, not 1.
10631
10632 2000-07-05  Eli Zaretskii <eliz@gnu.org>
10633
10634         * refcard.tex: Remove \centerline from the blurb.  Patch from
10635         Brian Youmans.
10636
10637 2000-06-25  Eli Zaretskii <eliz@gnu.org>
10638
10639         * Makefile.in (install-info): Support installation from outside of
10640         the source directory.  Reported by Mark Harig
10641         <markh@frazier.landmark.com>.
10642
10643 2000-06-20  J.T. Conklin  <jtc@redback.com>
10644
10645         * gdb.texinfo: Fix typo, $bpnum is set to last breakpoint number.
10646
10647 Fri May 26 15:55:33 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10648
10649         * Makefile.in (pdf, gdbint.pdf, gdb.pdf, stabs.pdf): New targets.
10650         Generate using pdftex.
10651         (PDFTEX): Define.
10652         (STAGESTUFF, maintainer-clean realclean): Add *.pdf.
10653         (gdb.texinfo, gdbint.texinfo, stabs.texinfo): When TeX insert the
10654         @contents at the start.
10655
10656 2000-05-24  Eli Zaretskii  <eliz@gnu.org>
10657
10658         * gdb.texinfo: Remove duplicate @syncodeindex.  From Brian
10659         Youmans.
10660
10661 Wed May 24 21:27:58 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10662
10663         From Brian Youmans:
10664         * gdb.texinfo: Fix ``et al.''.
10665
10666 Tue May 23 22:57:41 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10667
10668         * Makefile.in (refcard.dvi): Remove quotes around REFEDITS in for
10669         loop.
10670
10671 2000-05-19  Jimmy Guo  <guo@cup.hp.com>
10672
10673         * configure: Regenerate.
10674
10675 2000-05-17  Eli Zaretskii  <eliz@gnu.org>
10676
10677         * Makefile.in (install-info): Run install-info on installed Info
10678         files.
10679
10680 Fri May 12 20:18:04 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10681
10682         * gdb.texinfo: Add Stan Shebs, et.al. as authors.  Mention
10683         Andrew Cagney.
10684
10685 2000-05-09  Eli Zaretskii  <eliz@gnu.org>
10686
10687         * gdb.texinfo: Proofreading changes from Brian Youmans.
10688
10689 2000-05-01  Nick Duffek  <nsd@cygnus.com>
10690
10691         * gdb.texinfo (Command Files): Mention -x, use @enumerate for
10692         startup sequence, minor edits.
10693
10694 2000-05-01  Eli Zaretskii  <eliz@gnu.org>
10695
10696         * annotate.texi: Remove "@syncodeindex fn cp", it causes grief in
10697         TeX.
10698
10699         * gdb.texinfo: Add "@syncodeindex fn cp".  Convert all entries
10700         "@kindex f" into "@kindex f (foo)", otherwise we get index entries
10701         like `n' and `s' which look weird.  Convert some of the @kindex to
10702         @vindex, when they refer to variables, not commands.
10703
10704 Sat Apr 29 17:01:04 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10705
10706         * gdbint.texinfo (Hints): Do not use @value{GDBN in @nodes.
10707
10708 2000-04-23  Eli Zaretskii  <eliz@gnu.org>
10709
10710         * Makefile.in (GDBMI_DIR): New variable.
10711         (SET_TEXINPUTS): Add $(GDBMI_DIR).
10712         (SFILES_DOC): Add $(GDBMI_DIR)/gdbmi.texinfo.
10713         (gdbmi.texinfo): New target, for texi2roff.
10714         (gdb.me, gdb.ms, gdb.mm): Depend on gdbmi.texinfo.
10715         (gdb.info, gdb_toc.html): Add "-I ${GDBMI_DIR}".
10716
10717         * gdb.texinfo (Top): Add GDB/MI to the main menu and @include
10718         gdbmi.texinfo.
10719         (Mode Options): Add xref to GDB/MI docs and remove a FIXME
10720         comment.
10721
10722 2000-04-17  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
10723
10724         * gdb.texinfo (Files): Update description of add-symbol-file
10725         command.
10726
10727 2000-04-17  Eli Zaretskii  <eliz@gnu.org>
10728
10729         * gdb.texinfo (Porting GDB): Don't use @value in the node name, it
10730         prevents the build (and is generally a Bad Idea).
10731
10732 2000-04-17  Eli Zaretskii  <eliz@gnu.org>
10733
10734         * gdb.texinfo (Protocol): Prevent makeinfo from complaining about
10735         a comma inside @var.
10736         (Command Files): Index markup changes from Dmitry Sivachenko
10737         <dima@Chg.RU>.
10738
10739 2000-04-16  Eli Zaretskii  <eliz@gnu.org>
10740
10741         * Makefile.in (LN_S): Define.
10742         (gdb-cfg.texi, gdb.dvi, links2roff, inc-hist.texinfo): Don't
10743         invoke "ln -s" unless it is known to work.
10744
10745         * configure.in (AC_PROG_LN_S): Add.
10746
10747 2000-04-14  Jim Blandy  <jimb@redhat.com>
10748
10749         * gdbint.texinfo (Pointers Are Not Always Addresses): New manual
10750         section.
10751         (Target Conditionals): Document ADDRESS_TO_POINTER,
10752         POINTER_TO_ADDRESS.
10753
10754 2000-04-11  Daniel Berlin  <dan@cgsoftware.com>
10755
10756         * gdbint.texinfo: Replaced GDB with @value{GDBN}, @include
10757         gdb-cfg.texi to get the value.
10758
10759 2000-04-10  Jim Blandy  <jimb@redhat.com>
10760
10761         * gdbint.texinfo (Target Architecture Definition): Fix
10762         cross-references.
10763
10764 2000-04-08  Jim Blandy  <jimb@redhat.com>
10765
10766         * gdbint.texinfo (Using Different Register and Memory Data
10767         Representations): New section.
10768         (REGISTER_CONVERTIBLE, REGISTER_RAW_SIZE, REGISTER_VIRTUAL_SIZE,
10769         REGISTER_VIRTUAL_TYPE, REGISTER_CONVERT_TO_VIRTUAL,
10770         REGISTER_CONVERT_TO_RAW): Document.
10771
10772 Mon Apr  3 19:16:32 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10773
10774         * gdb.texinfo (Protocol): Deprecate the sequence-id.  Add cindex
10775         for acknowledgments.
10776
10777 Tue Mar 28 18:28:45 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10778
10779         * gdb.texinfo (Protocol): Replace ``qfThreadExtraInfo'' with
10780         qThreadExtraInfo.
10781
10782 2000-03-28  J.T. Conklin  <jtc@redback.com>
10783
10784         * gdb.texinfo: Clarify which remote debug protocol commands are
10785         required and which are optional.
10786
10787 Tue Mar 28 16:06:22 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10788
10789         * gdb.texinfo: Revert remainder of Fri Mar 24 18:06:34 2000 Andrew
10790         Cagney <cagney@b1.cygnus.com>.  Move @chapter and @node entries
10791         back to annotate.texi, rluser.texinfo and inc-hist.texinfo.
10792         * annotate.texi: Update.
10793
10794 2000-03-28  Stan Shebs  <shebs@apple.com>
10795
10796         * gdb.texinfo: Update dates, bump to Eighth Edition (note
10797         expectation of additional changes before release), update
10798         ISBN, add copy of top-level menu for @ifhtml, remove explicit
10799         node links, rephrase and/or shorten lines to fix formatting
10800         problem in both regular and @smallbook formats.
10801         * annotate.texi: Shorten lines in example, use smallexample
10802         consistently everywhere.
10803         * Makefile.in: Add comment about texinfo 4.0 html generation.
10804         (SFILES_INCLUDED): Add annotate.texi.
10805
10806 2000-03-27  Daniel Berlin  <dan@cgsoftware.com>
10807
10808         * gdb.texinfo (Debugging Output): Added new section, documenting
10809         the "set/show debug" commands.
10810
10811 Fri Mar 24 18:06:34 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10812
10813         * annotate.texi (Annotations): When GDBN omit @chapter and @node
10814         entry.
10815
10816         * gdb.texinfo: Check for @ifinfo instead of @ifnottex.
10817         (rluser.texinfo, inc-hist.texinfo, annotate.texi): Add local
10818         @chapter and @node entries.
10819
10820         * gdb.texinfo: Link all top-level nodes.
10821
10822 Fri Mar 24 17:56:48 2000  Andrew Cagney  <cagney@b1.cygnus.com>
10823
10824         * Makefile.in (install-info): Create $(infodir) before installing
10825         files.
10826
10827 2000-03-23  Fernando Nasser  <fnasser@totem.to.cygnus.com>
10828
10829         From David Whedon <dwhedon@gordian.com>
10830         * gdbint.texinfo : Added paragraphs about command deprecation.
10831
10832 2000-03-22  Daniel Berlin  <dan@cgsoftware.com>
10833
10834       * gdb.texinfo: Add documentation for the apropos command.
10835
10836 2000-03-20  Michael Snyder  <msnyder@cleaver.cygnus.com>
10837
10838         * gdb.texinfo: Add new queries ThreadInfo and ThreadExtraInfo.
10839
10840 2000-03-20  Michael Snyder  <msnyder@cleaver.cygnus.com>
10841
10842         * gdb.texinfo: Add white space to prevent overprinting in
10843         two places.
10844
10845 2000-03-17  Stan Shebs  <shebs@apple.com>
10846
10847         * gdb.texinfo: Many minor changes from Dmitry Sivachenko
10848         <dima@Chg.RU>, also clarification of allowed content for
10849         string constants.
10850
10851 2000-03-16  Eli Zaretskii <eliz@gnu.org>
10852
10853         * gdb.texinfo (main menu): Add Annotations.
10854         (File Options): Add @cindex entries for each command-line option.
10855         Document --epoch, --annotate, --async, --interpreter, --write,
10856         --statistics, and --version.
10857
10858         * annotate.texi: Convert to a chapter.  Use @value{GDBN} instead
10859         of GDB.
10860
10861 2000-02-23  Jim Blandy  <jimb@redhat.com>
10862
10863         * gdbint.texinfo (FUNCTION_START_OFFSET): Document.
10864
10865 2000-02-22  Jim Blandy  <jimb@redhat.com>
10866
10867         * gdbint.texinfo: Document COERCE_FLOAT_TO_DOUBLE --- the new form.
10868
10869 2000-02-15  Jason Molenda  (jsm@bugshack.cygnus.com)
10870
10871         * Makefile.in (diststuff): New target.
10872
10873 2000-02-15  Kevin Buettner  <kevinb@redhat.com>
10874
10875         * agentexpr.texi: Fix wording regarding Intel's IA-64
10876         architecture.  [From Jim Wilson.]
10877
10878 2000-01-16  Tom Tromey  <tromey@cygnus.com>
10879
10880         * gdb.texinfo (Breakpoints): Mention breakpoint ranges.
10881         (Delete Breaks): Mention range arguments.
10882         (Disabling): Likewise.
10883
10884 2000-01-05  Dmitry Sivachenko <dima@Chg.RU>
10885
10886         * gdb.texinfo:  Wrap "ASCII" in @sc{}; clarify a few sentences.
10887
10888 Wed Dec  8 19:53:08 1999  Andrew Cagney  <cagney@b1.cygnus.com>
10889
10890         * gdbint.texinfo (FRAME_CHAIN_VALID): Add the generic frame-chain
10891         valid functions.
10892
10893 1999-11-05  Stan Shebs  <shebs@andros.cygnus.com>
10894
10895         * gdb.texinfo: Clarify regular expressions used in rbreak.
10896
10897 1999-10-15  Kevin Buettner  <kevinb@cygnus.com>
10898
10899         * gdbint.texinfo (MEMORY_INSERT_BREAKPOINT,
10900         MEMORY_REMOVE_BREAKPOINT):  Document.
10901
10902 Thu Oct 14 21:17:17 1999  Andrew Cagney  <cagney@b1.cygnus.com>
10903
10904         * gdb.texinfo (remote): Document how GDB ignores the qOffsets BSS
10905         offset re-using the DATA offset instead.
10906
10907 1999-10-11  Jim Kingdon  <kingdon@redhat.com>
10908
10909         * gdbint.texinfo (Target Architecture Definition): Add PARM_BOUNDARY.
10910
10911 1999-10-05  Stan Shebs  <shebs@andros.cygnus.com>
10912
10913         From Dmitry Sivachenko <demon@gpad.ac.ru>:
10914         * gdb.texinfo: Use GDBP and GDBN everywhere, fix a couple other
10915         typos.
10916
10917         * gdb.texinfo: Various minor wording and formatting improvements,
10918         mentions of additional command-line options.
10919
10920 1999-09-30  Fred Fish  <fnf@cygnus.com>
10921
10922         * gdb.texinfo:  Document additional forms of specifying section
10923         names and addresses for the add-symbol-file command.
10924
10925 1999-09-14  Michael Snyder  <msnyder@cleaver.cygnus.com>
10926
10927         * gdbint.texinfo: Fix typo, add the word "have".
10928
10929 1999-09-14  Jim Blandy  <jimb@cris.red-bean.com>
10930
10931         * gdbint.texinfo (Target Architecture Definition): Document the
10932         SKIP_PERMANENT_BREAKPOINT macro.
10933
10934 1999-09-07  Stan Shebs  <shebs@andros.cygnus.com>
10935
10936         * gdb.texinfo: Fiks speling errers.
10937
10938         * gdb.texinfo: Fix uses of @multitable.
10939
10940         From Eli Zaretskii  <eliz@gnu.org>:
10941         * gdb.texinfo: Include details specific to DOS host, clarify
10942         some confusing language, fix @ref/@xref/@pxref usages, add
10943         comments about using with optimization, add more indexing,
10944         fix info about disassembly-flavor.
10945
10946 Tue Sep  7 09:11:24 1999  Kevin Buettner  <kevinb@cygnus.com>
10947
10948         * gdbint.texinfo (IN_SOLIB_DYNSYM_RESOLVE_CODE,
10949         SKIP_SOLIB_RESOLVER): Define.
10950
10951 Fri Sep  3 18:05:14 1999  Andrew Cagney  <cagney@b1.cygnus.com>
10952
10953         * gdb.texinfo (Protocol): Review.  Add tables describing ``q'' and
10954         ``g'' packets.
10955
10956 1999-08-30  Stan Shebs  <shebs@andros.cygnus.com>
10957
10958         * gdb.texinfo: Create a new "Configurations" chapter with
10959         platform-specific info, inline remote.texi and move sections of it
10960         into the new chapter, move bits about info proc, heuristic search,
10961         and register stack into the new chapter.
10962         * remote.texi: Remove, now part of gdb.texinfo.
10963         * Makefile.in (SFILES_INCLUDED): Remove ref to remote.texi.
10964
10965 1999-08-27  Jason Molenda  (jsm@bugshack.cygnus.com)
10966
10967         * gdbint.texinfo (GDB_TARGET_IS_SUN3, GDB_TARGET_IS_SUN386,
10968         GDB_TARGET_IS_MACH386): These kludges have gone away.
10969
10970 Wed Aug 25 10:47:03 1999  Andrew Cagney  <cagney@b1.cygnus.com>
10971
10972         * gdbint.texinfo (Target Architecture Definition): Mention
10973         TDEPLIBS.
10974
10975 1999-08-20  Stan Shebs  <shebs@andros.cygnus.com>
10976
10977         * gdb.texinfo: Remove remaining "HPPA" conditionals, rewrite
10978         surrounding text to fit HP-UX bits into general info.
10979         (HPPA-cfg.texi): Remove, no longer useful.
10980
10981         * gdb.texinfo: Remove explicit links from @node lines, remove
10982         HP-added "Detailed Node Listing" from main menu which confuses
10983         things.
10984
10985         From Dmitry Sivachenko <dima@Chg.RU>:
10986         * gdb.texinfo: Use @value{GDBN} instead of plain GDB, fix grouping
10987         in description of `set environment'.
10988
10989 1999-08-17  Stan Shebs  <shebs@andros.cygnus.com>
10990
10991         * gdbint.texinfo: Update coding standard to allow pure ANSI/ISO C.
10992
10993 1999-08-12  Ben Elliston  <bje@cygnus.com>
10994
10995         * gdbint.texinfo (Breakpoint Handling): Add missing words.
10996
10997 1999-08-10  Eli Zaretskii  <eliz@gnu.org>
10998
10999         * gdb.texinfo (Set Watchpoints): Explain some subtleties about
11000         watch, awatch, and rwatch.  Explain why the latter two cannot be
11001         set as software watchpoints.  Document that watchpoints for local
11002         variables are deleted when the debuggee terminates.
11003
11004 Wed Aug 11 13:18:14 1999  Andrew Cagney  <cagney@amy.cygnus.com>
11005
11006         * remote.texi (Protocol): Further clarification of the "qRcmd"
11007         packet.  Allow E.. response packet.  "qRcmd" packet is no longer
11008         reserved.
11009
11010 1999-08-10  Elena Zannoni  <ezannoni@kwikemart.cygnus.com>
11011
11012         * Makefile.in: Rename inc-hist.texi to inc-hist.texinfo.
11013         * gdb.texinfo: Ditto.
11014
11015 1999-08-06  Tom Tromey  <tromey@cygnus.com>
11016
11017         * gdb.texinfo (KOD): New node.
11018
11019 Fri Aug  6 17:05:48 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11020
11021         * remote.texi (Rcmd): Fix minor formatting typos.
11022
11023 Thu Aug  5 17:57:41 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11024
11025         * remote.texi (protocol qRcmd): Allow ``OK'' and ``O...'' response
11026         packets.
11027
11028 1999-07-14  Jim Blandy  <jimb@zwingli.cygnus.com>
11029
11030         * gdbint.texinfo (PREPARE_TO_PROCEED, ADDR_BITS_REMOVE): Doc
11031         fixes.
11032
11033 Tue Jun 29 11:43:55 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11034
11035         * gdbint.texinfo (SAVE_DUMMY_FRAME_TOS): Define.
11036
11037 Fri Jun 25 11:47:06 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11038
11039         * remote.texi (Communication Protocol): ``v'' is in use. Fix
11040         numerous formatting errors.  Clarify ``i''.  Mark ``i'', ``Z'',
11041         ``z'' and ``qRcmd'' as draft instead of reserved.  Identify
11042         packets that are not supported on all hosts. Expand examples.
11043         Spell check.
11044
11045 1999-06-24  Jason Molenda  (jsm@bugshack.cygnus.com)
11046
11047         * Makefile.in: Recognize html, install-html.  Add targets
11048         to build HTML versions of documentation via texi2html.
11049
11050 Thu Jun 24 15:59:03 1999  Stan Shebs  <shebs@andros.cygnus.com>
11051
11052         * gdbint.texinfo (Testsuite): New chapter, information about the
11053         testsuite.
11054
11055 Fri Jun 25 02:40:34 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11056
11057         * remote.texi (Communication Protocol): Rewrite.
11058
11059 Thu Jun 24 16:59:54 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11060
11061         * stabs.texinfo: Fix uses of xref.
11062
11063 Thu Jun 17 17:23:25 1999  Stan Shebs  <shebs@andros.cygnus.com>
11064
11065         * gdbint.texinfo: Add an anti-printf exhortation, and update the
11066         info about patch submission.
11067
11068 Mon Jun  7 15:49:40 1999  Stan Shebs  <shebs@andros.cygnus.com>
11069
11070         From Per Bothner  <bothner@cygnus.com>:
11071         * gdb.texinfo: Document Chill support.
11072
11073 Fri Jun  4 16:58:22 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11074
11075         * gdbint.texinfo (SP_REGNUM, FP_REGNUM, PC_REGNUM): Add reference
11076         to corresponding TARGET_READ_reg TARGET_WRITE_reg macros.
11077         Document that the value should be greater-than or equal-to zero.
11078         (NO_STD_REGS): Document. Deprecate.
11079
11080 Tue Jun  1 15:04:15 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11081
11082         * gdbint.texinfo (TARGET_COMPLEX_BIT, TARGET_DOUBLE_COMPLEX_BIT):
11083         Document that these are not used.
11084
11085 Thu May 27 09:28:15 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11086
11087         * gdbint.texinfo (EXTRACT_STRUCT_VALUE_ADDRESS_P): Document.
11088
11089 Mon May 24 10:07:39 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11090
11091         * gdbint.texinfo (FRAME_NUM_ARGS): Update definition.  Parameter
11092         numargs was dropped.
11093
11094 Thu May 20 12:26:59 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11095
11096         * gdbint.texinfo (FRAMELESS_FUNCTION_INVOCATION): Update.
11097
11098 Tue Apr 27 19:14:20 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11099
11100         * gdbint.texinfo (SKIP_PROLOGUE, SKIP_PROLOGUE_FRAMELESS_P):
11101         Update.
11102
11103 Thu Apr 22 13:07:37 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11104
11105         * gdbint.texinfo (USE_GENERIC_DUMMY_FRAMES): Document.
11106         (GET_SAVED_REGISTER): Update, not just the a29k uses this.
11107
11108 Wed Apr 21 13:59:01 1999  Dave Brolley  <brolley@cygnus.com>
11109
11110         * gdbint.texinfo: Fix typos: $ -> @.
11111
11112 Tue Apr 20 11:59:38 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11113
11114         * gdbint.texinfo (REGISTER_NAMES, BREAKPOINT, BIG_BREAKPOINT,
11115         LITTLE_BREAKPOINT, LITTLE_REMOTE_BREAKPOINT,
11116         BIG_REMOTE_BREAKPOINT): Deprecate in favor of REGISTER_NAME and
11117         BREAKPOINT_FROM_PC.
11118
11119 Mon Apr 12 16:00:44 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11120
11121         * gdbint.texinfo (CALL_DUMMY_STACK_ADJUST_P,
11122         CALL_DUMMY_STACK_ADJUST): Document.
11123
11124 Thu Apr  8 17:23:15 1999  Andrew Cagney  <cagney@b1.cygnus.com>
11125
11126         * gdbint.texinfo (CALL_DUMMY_P, CALL_DUMMY_WORDS,
11127         SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY): Define.
11128
11129 1999-04-02  Stan Shebs  <shebs@andros.cygnus.com>
11130
11131         * gdbint.texinfo (MAINTENANCE_CMDS): Remove ref, since it no
11132         longer exists.
11133
11134 Tue Mar  9 19:25:11 1999  Stan Shebs  <shebs@andros.cygnus.com>
11135
11136         * gdb.texinfo, remote.texi, all-cfg.texi, HPPA-cfg.texi: Remove
11137         nearly all @ifset/@ifclear conditionals; nobody uses them, and
11138         they make the manual source incomprehensible.
11139         * h8-cfg.texi: Remove, hasn't been used in years.
11140
11141 Thu Feb 11 18:00:59 1999  Stan Shebs  <shebs@andros.cygnus.com>
11142
11143         * gdb.texinfo: Update the credits.
11144
11145 Mon Feb  8 17:33:57 1999  Stan Shebs  <shebs@andros.cygnus.com>
11146
11147         * gdb.texinfo: Fix mistakes noticed in printout of last
11148         draft, add Alpha to discussion of heuristic fence post.
11149
11150 Fri Feb  5 17:20:00 1999  Stan Shebs  <shebs@andros.cygnus.com>
11151
11152         * gdb.texinfo, remote.texi: Many changes; update to Seventh
11153         Edition, merge some HP changes into mainline, describe some
11154         previously undocumented features, describe more of the target
11155         commands available, eliminate obsolete section on renamed
11156         commands.
11157         * all-cfg.texi, HPPA-cfg.texi: Remove some obsolete conditionals.
11158
11159 Wed Jan 20 17:47:45 1999  Stan Shebs  <shebs@andros.cygnus.com>
11160
11161         * gdb.texinfo: Make many HPPA conditionals unconditional,
11162         including catchpoint description, since now on for all configs.
11163         * all-cfg.texi: @clear HPPA, since is mainly for very HP-specific
11164         specializations.
11165
11166 Thu Jan 14 17:10:12 1999  Stan Shebs  <shebs@andros.cygnus.com>
11167
11168         * Makefile.in (GDBvn.texi): Fix match expression to work with
11169         current format of VERSION in gdb/Makefile.in.
11170         * gdb.texinfo: Fix node ref to match new readline.
11171
11172 Wed Jan 13 10:38:40 1999  Edith Epstein  <eepstein@sophia.cygnus.com>
11173
11174         * gdb.texinfo: Changes made as part of a project to merge in
11175           changes made by HP. Documentation makes extensive use of
11176           @ifclear HPPA and @ifset HPPA. The HP manual omits doumentation
11177           on remote debugging. There are differences in documentation
11178           (HP vs.  non-HP) on C++ support (aCC vs. gnu gcc++). Also,
11179           the HP manual discusses catchpoints, hardware watchpoints, and
11180           some HPUX specific limitations for shared library support.
11181
11182           There are also a number of @node changes.
11183
11184 1999-01-12  Jason Molenda  (jsm@bugshack.cygnus.com)
11185
11186         * gdbint.texinfo (Formatting): Disambiguate a sentence.
11187         (C Usage): Same.
11188
11189 Wed Jan  6 11:55:34 1999  David Taylor  <taylor@texas.cygnus.com>
11190
11191         The following changes were made by Edith Epstein
11192         <eepstein@cygnus.com> as part of a project to merge in changes
11193         made by HP.
11194
11195         * HPPA-cfg.texi: new file.
11196
11197         * all-cfg.texi: set HPPA for HP PA-RISC targets.
11198
11199         * refcard.tex: change documentation about catch.
11200           removed info catch.
11201
11202 Mon Jan  4 18:29:18 1999  Stan Shebs  <shebs@andros.cygnus.com>
11203
11204         * gdbint.texinfo: Expand on GDB's coding standards,
11205         specify the use of arg names with prototypes.
11206
11207 1998-12-14  J.T. Conklin  <jtc@redbacknetworks.com>
11208
11209         * gdb.texinfo: Fix tipo.
11210
11211 Sun Dec 13 10:27:59 1998  Andrew Cagney  <cagney@b1.cygnus.com>
11212
11213         * gdbint.texinfo: Document TARGET_BYTE_ORDER_DEFAULT and
11214         TARGET_BYTE_ORDER_SELECTABLE_P.
11215
11216 Thu Dec 10 16:07:09 1998  Andrew Cagney  <cagney@b1.cygnus.com>
11217
11218         * gdbint.texinfo (FRAME_FIND_SAVED_REGS): Document.
11219
11220 1998-12-09  Jim Blandy  <jimb@zwingli.cygnus.com>
11221
11222         * agentexpr.texi: New file.
11223
11224 Wed Dec  9 21:13:57 1998  Andrew Cagney  <cagney@chook>
11225
11226         * gdbint.texinfo (REGISTER_NAME): Replace REGISTER_NAMES.
11227
11228 1998-12-03  J.T. Conklin  <jtc@redbacknetworks.com>
11229
11230         * remote.texi: Changed wording that implied that the GDB remote
11231         protocol caches register values instead of GDB itself.
11232
11233 Tue Dec  1 17:45:43 1998  Stan Shebs  <shebs@andros.cygnus.com>
11234
11235         * gdbint.texinfo: Add some info about symbol readers.
11236         (CHILL_PRODUCER, etc): Comment out descriptions, not useful.
11237         (IN_SOLIB_CALL_TRAMPOLINE): Rename info from IN_SOLIB_TRAMPOLINE.
11238         (IN_SOLIB_RETURN_TRAMPOLINE): Describe.
11239         (KERNEL_DEBUGGING, MIPSEL): No info about these, remove.
11240
11241 Mon Nov 30 11:32:21 1998  Andrew Cagney  <cagney@chook>
11242
11243         * gdbint.texinfo (FRAME_CHAIN_VALID_ALTERNATE):
11244
11245 Sat Nov 28 13:45:53 1998  Andrew Cagney  <cagney@b1.cygnus.com>
11246
11247         * gdbint.texinfo (INNER_THAN): Update, now takes parameters.
11248
11249 Fri Nov 27 12:39:45 1998  Andrew Cagney  <cagney@chook>
11250
11251         * gdbint.texinfo (NO_SINGLE_STEP): Replace with
11252         SOFTWARE_SINGLE_STEP_P and SOFTWARE_SINGLE_STEP.
11253
11254 Wed Oct 14 10:02:40 1998  Andrew Cagney  <cagney@b1.cygnus.com>
11255
11256         * gdbint.texinfo: Fix minor typos.
11257
11258 Wed Sep 30 18:03:19 1998  Stan Shebs  <shebs@andros.cygnus.com>
11259
11260         * gdbint.texinfo: Complete overhaul.  Group descriptions more
11261         logically, add more info on generic algorithms, remove much
11262         obsolete and/or wrong material.
11263
11264 Fri Jul 24 17:51:38 1998  Ian Lance Taylor  <ian@cygnus.com>
11265
11266         * stabs.texinfo (Method Type Descriptor): Expand and correct.
11267
11268 Mon May  4 10:37:12 1998  Brian Youmans (3diff@gnu.org)
11269
11270         * refcard.tex:  Copyright, address updates.
11271
11272 Tue Apr 21 18:09:56 1998  Stan Shebs  <shebs@andros.cygnus.com>
11273
11274         * gdb.texinfo (EDITION, DATE): Update and change to use ordinals
11275         for the edition instead of confusing GDB-version-like numbers.
11276
11277 Mon Apr 13 14:05:00 1998  Fred Fish  <fnf@cygnus.com>
11278
11279         * gdb.texinfo (hbreak, watch): Fix typo, "date" -> "data".
11280
11281 Thu Apr  2 16:52:44 1998  Jason Molenda  (crash@bugshack.cygnus.com)
11282
11283         * LRS: Reformat a bit to keep text under 80 columns.
11284
11285 Thu Apr  2 16:10:36 1998  Stan Shebs  <shebs@andros.cygnus.com>
11286
11287         * gdb.texinfo: Add some credits, mention bug monitor.
11288         * remote.texi: Mention mips monitor targets.
11289         * gdbint.texinfo: Describe SP_REGNUM, STEP_SKIPS_DELAY.
11290
11291 Mon Feb  2 17:13:03 1998  Stan Shebs  <shebs@andros.cygnus.com>
11292
11293         * gdbint.texinfo: Remove obsolete mentions of pinsn.c and opcode.h
11294         files, finish sorting of host vs target vs native macros, describe
11295         some more of them.
11296
11297 Tue Jan 13 16:44:50 1998  Fred Fish  <fnf@cygnus.com>
11298
11299         * gdbint.texinfo (Host Conditionals): Document change from
11300         using NO_MMALLOC to it's inverse, USE_MMALLOC.
11301
11302 Mon Nov 24 13:55:21 1997  Andrew Cagney  <cagney@b1.cygnus.com>
11303
11304         * gdbint.texinfo (Host Conditionals): Document
11305         PRINTF_HAS_LONG_DOUBLE, SCANF_HAS_LONG_DOUBLE, HAVE_LONG_DOUBLE.
11306
11307 Fri Jul  4 14:52:31 1997  Ian Lance Taylor  <ian@cygnus.com>
11308
11309         * gdbint.texinfo (Host Conditionals): Add CRLF_SOURCE_LINES.
11310         Document LSEEK_NOT_LINEAR.
11311
11312 Tue Mar 25 14:44:09 1997  Ian Lance Taylor  <ian@cygnus.com>
11313
11314         * stabs.texinfo (Stab Section Basics): Make it clear that only
11315         some versions of the GNU linker remove the leading N_UNDF symbol.
11316
11317 Thu Feb 27 17:45:19 1997  Ian Lance Taylor  <ian@cygnus.com>
11318
11319         * stabs.texinfo (String Field): Document type number pairs here,
11320         instead of in the Sun specific section.
11321         (Include Files): The GNU linker supports the N_BINCL
11322         optimization.  Clarify the N_BINCL value, and what it is used
11323         for.
11324         (Procedures): Document N_FUN with an empty string to mark the end
11325         of a function.
11326         (Typedefs): Mention that Sun compilers may use N_GSYM for a type.
11327         (Sun Differences): Remove this node, as the information is now
11328         elsewhere in the main document.
11329         (Stab Section Basics): Mention that the GNU linker may optimize
11330         stabs and remove the leading N_UNDF symbol.
11331
11332 Mon Dec  9 12:23:32 1996  Roland Pesch  <roland@wrs.com>
11333
11334         * gdb.texinfo, refcard.tex: Restore author credit
11335
11336 Wed Oct  2 22:01:36 1996  Fred Fish  <fnf@fishfood.ninemoons.com>
11337
11338         * gdbint.texinfo (SIGTRAMP_START, SIGTRAMP_END): Update
11339         documentation to account for START and END macros taking
11340         one arg.
11341
11342 Thu Aug 22 17:59:03 1996  Fred Fish  <fnf@cygnus.com>
11343
11344         From: Eberhard Mattes <mattes@azu.informatik.uni-stuttgart.de>
11345         * gdb.texinfo (Frames): Fix typo.
11346
11347 Tue Jul 23 10:06:20 1996  Fred Fish  <fnf@cygnus.com>
11348
11349         * gdbint.texinfo (NO_SINGLE_STEP): Document that single_step takes
11350         a target_signal as arg type, not a pid.
11351
11352 Fri Jul 12 11:10:05 1996  Stu Grossman  (grossman@critters.cygnus.com)
11353
11354         * gdb.texinfo:  Document `set assembly-language'.
11355
11356 Thu Jul 11 13:50:28 1996  Stan Shebs  <shebs@andros.cygnus.com>
11357
11358         * remote.texi: Update list of stubs in the GDB distribution.
11359
11360 Fri Jul  5 15:38:54 1996  Fred Fish  <fnf@cygnus.com>
11361
11362         * gdbint.texinfo (NO_MMCHECK): Renamed from NO_MMALLOC_CHECK.
11363         Also document that some systems can use mmalloc but must define
11364         this if their C runtime allocates memory that is later freed.
11365         (MMCHECK_FORCE): Document new macro.
11366
11367 Fri Jun 28 22:17:10 1996  Dawn Perchik  <dawn@cygnus.com>
11368
11369         * remote.texi: Add documentation for target Sparclet.
11370
11371 Mon Jun 24 18:12:22 1996  Jason Molenda  (crash@godzilla.cygnus.co.jp)
11372
11373         * Makefile.in (srcdir, VPATH, prefix, infodir, INSTALL,
11374         INSTALL_PROGRAM, INSTALL_DATA): Use autoconf set values.
11375         * configure.in: Rewritten for autoconf.
11376         * configure: New.
11377
11378 Mon Jun 17 10:43:41 1996  Fred Fish  <fnf@cygnus.com>
11379
11380         * Makefile.in (DVIPS): New define, set to dvips.
11381         (dvi): Add stabs.dvi.
11382         (ps): New target.
11383         (all-doc): Depend on info, dvi, and ps targets.
11384         (STAGESTUFF): Add *.ps and *.dvi files.
11385         (clean-info, clean-dvi): Remove.
11386         (mostlyclean): Does not depend upon clean-info or clean-dvi,
11387         rules completely rewritten.
11388         (maintainer-clean): Remove clean-info and clean-dvi
11389         dependencies and put their actions in the rules.
11390         (gdb.ps): New target
11391         (gdb.dvi, gdbgui.dvi, gdbint.dvi, stabs.dvi): Remove
11392         intermediate TeX files, whether they have 2 or 3 character
11393         extensions.
11394         (gdbint.ps): Add target and rules.
11395         (gdb-internals): Delete unused target.
11396         (Makefile): Depends upon config.status also.
11397
11398 Sat Mar 30 15:46:58 1996  Fred Fish  <fnf@cygnus.com>
11399
11400         * gdbint.texinfo (CC_HAS_LONG_LONG): Clarify when/how this is
11401         set.
11402
11403 Sat Mar 16 15:10:20 1996  Fred Fish  <fnf@cygnus.com>
11404
11405         From Peter Schauer <Peter.Schauer@Regent.E-Technik.TU-Muenchen.DE>
11406         * gdb.texinfo (Expressions): Fix erroneous array constant example.
11407
11408 Sat Mar 16 13:28:45 1996  Fred Fish  <fnf@cygnus.com>
11409
11410         * gdb.texinfo: Add missing "@bullet" to some "@itemize" commands.
11411
11412 Sat Feb 10 03:28:36 1996  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
11413
11414         * gdb.texinfo (Print settings):  Document
11415         `set/show print static-members' commands.
11416
11417 Wed Jan 10 14:16:37 1996  Fred Fish  <fnf@cygnus.com>
11418
11419         * gdbint.texinfo (Native): Document name change, coredep.c to
11420         core-aout.c.
11421
11422 Wed Dec 13 12:35:28 1995  Ian Lance Taylor  <ian@cygnus.com>
11423
11424         * stabs.texinfo (Include Files): Document the values the SunOS4
11425         linker creates for N_BINCL/N_EINCL/N_EXCL stabs.
11426
11427 Fri Dec  8 21:08:44 1995  Fred Fish  <fnf@cygnus.com>
11428
11429         * gdbint.texinfo (Releases): Change gdb.tar.Z to gdb.tar.gz.
11430         Fix typo.
11431
11432 Fri Dec  1 11:07:50 1995  Fred Fish  <fnf@cygnus.com>
11433
11434         * gdbint.texinfo (Releases): Make "gdb.tar.gz" rather than
11435         "gdb.tar.Z".
11436
11437 Wed Sep 20 13:14:10 1995  Ian Lance Taylor  <ian@cygnus.com>
11438
11439         * Makefile.in (maintainer-clean): New target, synonym for
11440         realclean.
11441
11442 Thu Aug  3 10:45:37 1995  Fred Fish  <fnf@cygnus.com>
11443
11444         * Update all FSF addresses except those in COPYING* files.
11445
11446 Wed Jul 19 18:43:03 1995  Stan Shebs  <shebs@andros.cygnus.com>
11447
11448         From Richard Earnshaw (rearnsha@armltd.co.uk):
11449         * gdb.texinfo (convenience variables): Document $_exitcode.
11450         (quit): Document optional expression to use as exit code.
11451
11452 Thu Jun 22 21:27:33 1995  Victoria Mixon  <victoria@cygnus.com>
11453
11454         * gdb.texinfo, remote.texi: Brought up to date with various
11455         GDB changes.
11456
11457 Tue Jun 20 14:35:38 1995  Stan Shebs  <shebs@andros.cygnus.com>
11458
11459         * gdb.texinfo: Update dates and versions, fix comments about
11460         hardware watchpoints in future releases and about the
11461         sharedlibrary command.
11462
11463 Mon May  8 09:30:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
11464
11465         * stabs.texinfo: Remove node `XCOFF differences'.  Describe value of
11466         C_FUN stab.  Other cleanups.
11467
11468 Wed Apr 19 07:02:19 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
11469
11470         * remote.texi (Bootstrapping): Clarify that flush_i_cache is only
11471         for the sparc stub.
11472
11473 Tue Apr 11 11:41:49 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
11474
11475         * annotate.texi: Clarify which addresses have differing formats
11476         depending on the language and which do not.
11477
11478 Tue Mar 28 16:56:22 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
11479
11480         * remote.texi (NetWare): Changed example to use BOARD= instead of
11481           NODE= argument to reflect correspoding change to gdbserve.nlm.
11482
11483 Fri Mar 17 06:47:02 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
11484
11485         * stabs.texinfo (Negative Type Numbers): Mention the fact that
11486         GDB, as well as AIX dbx, supports the size type attribute.
11487
11488 Thu Mar 16 12:11:32 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
11489
11490         * stabs.texinfo (Negative Type Numbers): Document types -31 to -34.
11491
11492 Mon Mar 13 16:49:13 1995  Per Bothner  <bothner@kalessin.cygnus.com>
11493
11494         * gdb.texinfo (Define):  Document $arg0... arguments to commands,
11495         and new 'if' and 'while' commands.
11496
11497 Fri Feb 17 15:24:35 1995  Per Bothner  <bothner@kalessin.cygnus.com>
11498
11499         * gdb.texinfo (Artificial arrays):  Note use of coerce-to-array-type.
11500
11501 Wed Feb 15 11:59:18 1995  J.T. Conklin  <jtc@rtl.cygnus.com>
11502
11503         * all-cfg.texi: New flag, GDBSERVE, for NetWare's gdbserve.nlm.
11504         * remote.texi (NetWare): New node, how to use gdbserve.nlm on
11505           NetWare targets.  Mostly stolen from the Server node.
11506
11507 Fri Feb 10 20:20:08 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
11508
11509         * gdb.texinfo (Setting): Talk about the language of a source file
11510         versus the working language.  The old documentation did not match
11511         what GDB did.
11512
11513 Wed Feb  1 20:26:36 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
11514
11515         * stabs.texinfo (Source Files): Document N_SO used to mark the end
11516         of a source file.
11517
11518 Mon Jan 23 14:23:37 1995  Jim Kingdon  (kingdon@lioth.cygnus.com)
11519
11520         * gdb.texinfo (Processes): New node.
11521
11522 Tue Jan 17 14:09:03 1995  Ian Lance Taylor  <ian@sanguine.cygnus.com>
11523
11524         * remote.texi: Update documentation of set/show mipsfpu.
11525
11526 Fri Jan  6 17:17:28 1995  Stan Shebs  <shebs@andros.cygnus.com>
11527
11528         * gdbgui.texinfo: New file, manual for GUI (gdbtk) users.
11529         * Makefile.in (gdbgui.dvi, gdbgui.info): New actions.
11530
11531 Sun Sep  4 16:47:21 1994  Stan Shebs  (shebs@andros.cygnus.com)
11532
11533         * gdbint.texinfo: Removed mentions of some incorrectly placed and
11534         obsolete conditionals, described some others.
11535
11536 Mon Aug  1 15:42:39 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11537
11538         * gdbint.texinfo: Remove references to BROKEN_LARGE_ALLOCA and
11539         SET_STACK_LIMIT_HUGE; they were removed from GDB 14 May 1994.
11540
11541 Mon Aug  1 15:12:02 1994  Stan Shebs  (shebs@andros.cygnus.com)
11542
11543         * gdbint.texinfo: Put regex conditionals in their own table.
11544
11545 Tue Jul 26 18:32:52 1994  Stan Shebs  (shebs@andros.cygnus.com)
11546
11547         * gdbint.texinfo: Removed mentions of many obsolete conditionals,
11548         described or fixed the descriptions of many others.
11549
11550 Sun Jul 17 14:14:03 1994  Stan Shebs  (shebs@andros.cygnus.com)
11551
11552         * gdb.texinfo: Add some more credits.
11553         * gdbint.texinfo: Capitalize GDB consistently, describe some
11554         macros and remove some.
11555
11556 Thu Jul 14 18:43:17 1994  Stan Shebs  (shebs@andros.cygnus.com)
11557
11558         * gdbint.texinfo: Removed mentions of many incorrectly placed and
11559         obsolete conditionals, described some others.
11560
11561 Tue Jul 12 12:23:15 1994  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
11562
11563         * gdb.texinfo (help targets):  Changed to `help target', which
11564         is the correct gdb command.
11565
11566 Wed Jun 22 18:00:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11567
11568         * annotate.texi (TODO): New node, for keeping track of annotations
11569         suggested but not yet implemented.
11570
11571 Wed Jun  1 16:10:45 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11572
11573         * stabs.texinfo (Statics): Value of xcoff C_BSTAT points to
11574         another symbol, it is not the address itself.
11575
11576 Thu May  5 20:23:36 1994  Stan Shebs  (shebs@andros.cygnus.com)
11577
11578         * stabs.texinfo (Stab Section Basics): Add comment about alignment
11579         of stabs-in-coff sections.
11580
11581 Wed May  4 06:26:11 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11582
11583         * annotate.texi: Change edition to 0.5 and date to May 1994.
11584         Add index.
11585         (Frames): New node, for frame annotation.
11586         (Displays): New node, for display annotation.
11587
11588         * remote.texi (MIPS Remote): Say that set timeout doesn't apply
11589         when waiting for your program to stop.
11590
11591 Fri Apr 29 18:24:46 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11592
11593         * annotate.texi (Breakpoint Info): Document annotation of header
11594         fields and record annotation.
11595
11596 Thu Apr 28 07:44:28 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11597
11598         * annotate.texi: New file, to document annotations.
11599
11600 Thu Apr 21 14:20:51 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11601
11602         * Makefile.in (clean): Don't remove GDBvn.texi (apparently on Jan
11603         16 I meant to make this change but did not).  Do remove gdb-cfg.texi.
11604
11605 Wed Apr 20 11:22:48 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11606
11607         * stabs.texinfo (Stab Section Basics): Say what is in .stab
11608         section, and say n_strx field is compilation unit relative.
11609         * stabs.texinfo: Don't use @code for a.out when it is the name of
11610         an object file format.
11611
11612 Wed Apr 13 20:29:54 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
11613
11614         * gdb.texinfo: Refer to file names, not path names, per rms
11615         convention.
11616         (Arguments): Fix typo.
11617
11618 Thu Mar 24 08:09:12 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11619
11620         * stabs.texinfo (Global Variables): Talk about stabs in files
11621         where variables are referenced, but not defined.
11622
11623 Wed Mar 23 07:16:36 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11624
11625         * stabs.texinfo: Move stuff on @ and # type descriptors from node
11626         Cplusplus to new nodes Member Type Descriptor and Method Type
11627         Descriptor.  Re-write stuff for #.
11628
11629 Wed Mar 16 08:20:19 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11630
11631         * gdb.texinfo (Print Settings): Don't document "set print
11632         fast-symbolic-addr off".  The bug which it worked around was fixed
11633         on 25 Feb 94 in coffread.c, so I'm nuking the command.
11634
11635         * stabs.texinfo (Alternate Entry Points): New node, rewritten from
11636         N_ENTRY node.
11637
11638         * stabs.texinfo (Type Descriptors): Add 'Y' type descriptor.
11639
11640 Tue Mar 15 08:43:02 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11641
11642         * gdbint.texinfo (Host Conditionals, Target Conditionals): Remove
11643         references to ieee-float.c.
11644
11645 Fri Mar 11 08:09:40 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11646
11647         * gdb.texinfo (Set Breaks): Update documentation for tbreak to
11648         match what the code actually does.
11649
11650 Wed Mar  9 19:43:05 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11651
11652         * stabs.texinfo (Symbol Descriptors): Add OS9000 symbol descriptor s.
11653
11654 Tue Mar  1 17:04:43 1994  Jim Kingdon  (kingdon@deneb.cygnus.com)
11655
11656         * stabs.texinfo (Type Descriptors): Add OS9000 type descriptors c,
11657         i, and b.
11658
11659 Wed Feb 23 10:44:18 1994  Jim Kingdon  (kingdon@rtl.cygnus.com)
11660
11661         * stabs.texinfo: Document N_RBRAC as function relative for COFF as
11662         well as for ELF and SOM.  Unify the descriptions of ELF and SOM
11663         as "stabs in sections" rather than just saying "ELF and SOM".
11664         Also make that stuff apply to COFF.
11665
11666 Fri Feb 18 08:25:58 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11667
11668         * gdb.texinfo (Formatting Documentation): Change GhostScript to
11669         Ghostscript.
11670
11671 Fri Feb  4 06:31:31 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11672
11673         * gdb.texinfo (Continuing and Stepping): When talking about "step"
11674         versus functions without line numbers, also mention stepping into
11675         them as well as "step" when you are in them.  Tell the user how to
11676         deal with the situation.  Add comment about "debugging information".
11677
11678 Thu Feb  3 11:39:59 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11679
11680         * stabs.texinfo (Enumerations): Document restriction on where
11681         enumeration types can appear and still win with GDB.
11682
11683 Wed Feb  2 11:29:17 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11684
11685         * stabs.texinfo (Negative Type Numbers): Document format for type
11686         -16.
11687
11688 Thu Jan 27 16:53:56 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11689
11690         * gdb.texinfo (Selection, Frame Info): Update information about
11691         arbitrary frame specficiations.
11692
11693 Wed Jan 26 15:31:57 1994  Roland H. Pesch  (pesch@fowanton.cygnus.com)
11694
11695         * gdb.texinfo, remote.texi: general editing pass prior to Net release
11696
11697 Tue Jan 25 12:12:04 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11698
11699         * stabs.texinfo (String Field): Discuss continuing stabs with ?.
11700
11701 Wed Jan 19 06:39:24 1994  David J. Mackenzie  (djm@thepub.cygnus.com)
11702
11703         * stabs.texinfo (Non-Stab Symbol Types): Mention N_SET* | N_EXT.
11704
11705 Sun Jan 16 12:43:32 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11706
11707         * stabs.texinfo: Re-do stuff about C_BSTAT and move from XCOFF
11708         Differences node to Statics node.
11709         (Statics): Discuss XCOFF use of V symbol descriptor.
11710
11711         * Makefile.in: Remove refcard.dvi and GDBvn.texi in realclean,
11712         not clean.
11713
11714 Wed Jan 12 21:29:54 1994  John Gilmore  (gnu@cygnus.com)
11715
11716         * gdb.texinfo (Print Settings): Document `set print
11717         fast-symbolic-addr' and improve the doc for some other
11718         `set print's.
11719
11720 Mon Jan  3 17:23:07 1994  Jim Kingdon  (kingdon@lioth.cygnus.com)
11721
11722         * stabs.texinfo (String Field): Talk about defining several type
11723         numbers at once.
11724         Fix lint regarding changing node ELF Transformations to
11725         ELF and SOM Transformations.
11726
11727 Fri Dec 31 00:42:43 1993  John Gilmore  (gnu@cygnus.com)
11728
11729         * stabs.texinfo:  Insert Peter Kessler's name as inventor (I think).
11730
11731 Tue Dec 28 09:30:40 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11732
11733         * stabs.texinfo (Cross-References): `::' is for nested types only
11734         within <>.
11735         (Structures): Document static members.
11736
11737 Mon Dec 27 13:55:04 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11738
11739         * stabs.texinfo: Document S type attribute.
11740
11741 Sun Dec 26 20:46:36 1993  Jeffrey A. Law  (law@snake.cs.utah.edu)
11742
11743         * stabs.texinfo: Add notes about stabs-in-som where appropriate.
11744
11745 Fri Dec  3 19:13:19 1993  John Gilmore  (gnu@cygnus.com)
11746
11747         * gdbint.texinfo:  Fix a few typos.
11748
11749 Sun Nov 28 18:06:25 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
11750
11751         * gdb.texinfo, remote.texi: formatting improvements
11752
11753         * gdb.texinfo (New Features): mention threads.
11754         (Summary, C): fix xrefs in newly contributed text.
11755         (Threads): index entries, clarifications, example
11756         (passim): minor typos fixed, phrasing improvements
11757
11758         * remote.texi (Bootstrapping): rephrase text on ^C and add index
11759         entries; (Server): explain use of gdbserver w/real-time systems,
11760         add example of conflicting TCP port; (MIPS Remote) break up
11761         running text into table, highlighting commands, and add example.
11762
11763 Wed Nov 24 14:15:56 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
11764
11765         * refcard.tex: avoid bad linebreaks even when REFEDITS=psrc.sed
11766
11767 Fri Nov 12 16:10:58 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11768
11769         * stabs.texinfo (Nested Symbols): New node.
11770         (String Field, Symbol Descriptors, Cross-References): Refer to it.
11771
11772 Thu Nov 11 13:26:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11773
11774         * stabs.texinfo (Stabs in ELF): Clarify how Bbss.bss work with respect
11775         to picking which Bbss.bss symbol to use, and (because there seems to
11776         be no good way of doing it) re-write some of the text to make it
11777         sound like Bbss.bss isn't such a great idea after all (as currently
11778         designed).
11779
11780         * gdb.texinfo (C): In addition to saying people have to use g++ for
11781         good results, say they have to use stabs.  Specifically say cfront
11782         doesn't work well.
11783         (Summary): Merge in information on Modula-2, Pascal, and Chill from
11784         the gdb README.  Add xrefs to places where the support for the various
11785         languages is described in detail.
11786
11787 Mon Nov  8 11:47:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11788
11789         * stabs.texinfo: Clean up stuff about visibility and virtual
11790         characters.
11791
11792         * stabs.texinfo (N_M2C): Cite Sun doc.
11793
11794 Fri Nov  5 16:27:27 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
11795
11796         * gdb.texinfo: updates re threads.
11797         * remote.texinfo: avoid index entries starting with digits.
11798
11799 Tue Nov  2 09:08:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11800
11801         * stabs.texinfo (Enumerations): Talk about large, negative and
11802         octal values.  Clean up cross reference to type attributes.
11803         (String Field): Say that GDB 4.11 supports size attribute.
11804
11805 Sun Oct 31 13:31:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11806
11807         * remote.texi (VxWorks Remote): Clarify that rebuilding VxWorks kernel
11808         is a mandatory step.  Make the stuff about that more concise.
11809
11810 Wed Oct 27 00:25:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11811
11812         * stabs.texinfo (Class Names): New node.
11813
11814         * gdb.texinfo (Command Files): Explain order of init file reading.
11815
11816         * remote.texi (Bootstrapping): Talk about getting the serial driver
11817         to deal with ^C sent by gdb to stop the remote system.
11818
11819 Mon Oct 25 03:25:41 1993  Tom Lord  (lord@cygnus.com)
11820
11821         * libgdb.texinfo (I/O): incorporated better phrasing from rich.
11822
11823         * libgdb.texinfo (Defining Commands): made the DOC arg
11824         to gdb_define_app_command a char * instead of char **
11825         per a suggestion from kingdon.
11826
11827         * libgdb.texinfo: total rewrite from a different starting
11828         premise.
11829
11830 Wed Oct 20 18:07:44 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11831
11832         * stabs.texinfo (Local Variable Parameters): Re-write paragraph on
11833         floats passed as doubles (to improve clarity).
11834
11835 Tue Oct 19 14:21:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
11836
11837         * gdb.texinfo (Source Path): index entries for $cwd, $pdir
11838
11839         * a4rc.sed: update to work with Andreas Vogel papersize params
11840
11841         * refcard.tex: use Andreas Vogel simplifications of papersize
11842         params; remove useless version info; update copyright date.
11843
11844 Tue Oct 19 10:46:22 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11845
11846         * gdb.texinfo (Symbols): Add class NAME to doc for ptype.
11847
11848 Tue Oct 12 09:11:45 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11849
11850         * gdb.texinfo (Files): Say what address the load command loads it at.
11851
11852         * stabs.texinfo (Common Blocks): Minor cleanups.
11853
11854         * stabs.texinfo: Update ld stabs in elf relocation to reflect the fact
11855         that Sun has backed away from the linker kludge and thus the relevant
11856         issue is changes to the SunPRO tools, not the Solaris linker.
11857
11858         * stabs.texinfo (Traditional Integer Types): Clean up description
11859         of octal bounds a little bit.  Document extra leading zeroes.
11860
11861 Thu Oct  7 16:15:37 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11862
11863         * gdb.texinfo (Signaling): Update for symbolic symbol names
11864         and add a section explaining the difference between the GDB
11865         signal command and the shell kill utility.
11866
11867 Wed Oct  6 13:23:01 1993  Tom Lord  (lord@rtl.cygnus.com)
11868
11869         * libgdb.texinfo: added `@' to braces that were unescaped.
11870
11871 Mon Oct  4 10:42:18 1993  Tom Lord  (lord@rtl.cygnus.com)
11872
11873         * libgdb.texinfo: new file.  Spec for the gdb library.
11874
11875 Sun Oct  3 15:26:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11876
11877         * stabs.texinfo (Include Files): Fix typo (start -> end).
11878
11879 Thu Sep 30 18:24:56 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
11880
11881         * gdb.texinfo, remote.texi: assorted small improvements, mostly
11882         from Melissa at FSF's editing pass.
11883
11884 Thu Sep 30 11:54:38 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11885
11886         * gdb.texinfo: Remove stuff about ar and 14 character filenames.
11887         I believe this was fixed by the 13 Sep 89 change to print_frame_info.
11888         Also, modern versions of ar like BSD 4.4 or SVR4 don't have this bug.
11889
11890 Wed Sep 22 21:22:11 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11891
11892         * remote.texi (Bootstrapping): Discuss 386 call gates.
11893
11894 Sat Sep 18 17:10:44 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
11895
11896         * stabs.texinfo (Based Variables): New node.
11897
11898 Thu Sep 16 17:48:55 1993  Jim Kingdon  (kingdon@cirdan.cygnus.com)
11899
11900         * stabs.texinfo (Negative Type Numbers): Re-write discussions of
11901         names, sizes, and formats to suggest how not to lose.
11902
11903 Sat Sep 11 09:35:11 1993  Jim Kingdon  (kingdon@poseidon.cygnus.com)
11904
11905         * stabs.texinfo (Methods): Fix typo.
11906
11907 Fri Sep 10 06:34:20 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
11908
11909         * gdb.texinfo: Fix a few typos.
11910
11911 Wed Sep  8 09:11:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11912
11913         * gdb.texinfo: Clarify how well it works with Fortran.
11914
11915         * stabs.texinfo (Stabs In ELF, Statics, ELF Transformations):
11916         More on relocating stabs in ELF files.
11917
11918 Tue Sep  7 13:45:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11919
11920         * stabs.texinfo (Stabs In ELF): Talk about N_FUN value.
11921
11922 Mon Sep  6 19:23:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11923
11924         * stabs.texinfo (Local Variable Parameters): Talk about nameless
11925         parameters on VAX.
11926
11927 Fri Sep  3 17:06:08 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
11928
11929         * gdb.texinfo: @up/@down -> @raisesections/@lowersections
11930
11931 Fri Sep  3 12:04:15 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11932
11933         * stabs.texinfo: Make info author notice match the TeX author notice.
11934
11935 Tue Aug 31 13:21:06 1993  David J. Mackenzie  (djm@thepub.cygnus.com)
11936
11937         * stabs.texinfo: Initial-caps all words in node names and
11938         non-trivial words in section names.
11939
11940 Mon Aug 30 11:13:16 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11941
11942         * stabs.texinfo: Many minor cleanups.
11943
11944         * stabs.texinfo: Remove @deffn except from Expanded Reference node.
11945
11946 Sat Aug 28 12:08:09 1993  David J. MacKenzie  (djm@edison.eng.umd.edu)
11947
11948         * stabs.texinfo: Remove full description of big example.
11949         It's not really helpful; just use pieces of it where appropriate.
11950         Add more Texinfo formatting directives (@samp, etc.).
11951         Use @deffn to define stab types.
11952         Eliminate some wordiness.  Break up some nodes.
11953         Add an (alphabetized) index of symbol types.
11954         Use consistent capitalization style in node and section names.
11955
11956 Thu Aug 26 06:36:31 1993  Fred Fish  (fnf@deneb.cygnus.com)
11957
11958         * gdb.texinfo:  Change typo "Two two" to "The two".
11959
11960 Sun Aug 22 12:15:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11961
11962         * stabs.texinfo (XCOFF-differences): Remove references to
11963         non-existent types N_DECL and N_RPSYM.
11964
11965         * stabs.texinfo (String Field): Say that type attributes bug is
11966         fixed in GDB 4.10, since it is.
11967
11968         * stabs.texinfo: Clean up djm cleanups, and more cleanups of my own.
11969
11970 Sat Aug 21 04:32:28 1993  David MacKenzie  (djm@cygnus.com)
11971
11972         * stabs.texinfo: Formatting cleanups.
11973
11974 Fri Aug 20 20:49:53 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11975
11976         * stabs.texinfo: When explaining the n_type of a stab, standardize
11977         how we do it ('#' as a comment indicator, "36 is N_FUN" as text,
11978         no tabs, use @r).
11979         (Global Variables): Clean up.
11980
11981 Tue Aug 17 15:57:27 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11982
11983         * stabs.texinfo (Stack Variables): Re-write.
11984
11985 Mon Aug 16 21:20:08 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11986
11987         * stabs.texinfo (Stabs-in-elf): Talk about getting the start
11988         addresses of a source file.  Also revise formatting.
11989         Change "object module" or "object file" to "source file".
11990         Various: Miscellaneous cleanups.
11991
11992 Thu Aug 12 15:11:51 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
11993
11994         * stabs.texinfo: Point to mangling info in gcc's gpcompare.texi.
11995
11996 Tue Aug 10 16:57:49 1993  Stan Shebs  (shebs@rtl.cygnus.com)
11997
11998         * gdbint.texinfo: Removed many nonsensical machine-collected
11999         host and target conditionals, described some of the remainder.
12000
12001 Tue Aug 10 13:28:30 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12002
12003         * gdbint.texinfo (Getting Started): Use @itemize, not @table.
12004
12005         * gdbint.texinfo (Top): Add name to @top line, and re-write the
12006         paragraph which follows.
12007
12008         * gdbint.texinfo (Host): Use @code not @samp for Makefile
12009         variables.  Looks better and avoids overful hbox.
12010
12011 Fri Jul 30 18:26:21 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12012
12013         * stabs.texinfo (Procedures): Improve stuff on nested functions.
12014
12015 Thu Jul 29 15:10:58 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12016
12017         * remote.texi: (MIPS Remote) clearer doc for set/show timeout,
12018         retransmit-timeout
12019
12020 Thu Jul 29 13:16:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12021
12022         * gdbint.texinfo: Update statement about `some ancient Unix
12023         systems, like Ultrix 4.0' to Ultrix 4.2.
12024
12025 Wed Jul 28 15:26:53 1993  Roland H. Pesch  (pesch@el_bosque.cygnus.com)
12026
12027         * h8-cfg.texi, all-cfg.texi: new flag GDBSERVER
12028
12029         * Makefile.in: depend on remote.texi rather than gdbinv-s.texi
12030
12031         * remote.texi: (Server) New node on gdbserver.  (Remote Serial,
12032         ST2000 Remote, MIPS Remote): mention `host:port' syntax for TCP.
12033
12034         * remote.texi: new name for former gdbinv-s.texi
12035
12036         * gdb.texinfo: use remote.texi rather than gdbinv-s.texi
12037
12038 Wed Jul 28 08:26:24 1993  Ian Lance Taylor  (ian@cygnus.com)
12039
12040         * gdbinv-s.texi: Documented timeout and retransmit-timeout
12041         variables for MIPS remote debugging protocol.
12042
12043 Mon Jul 26 13:00:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12044
12045         * stabs.texinfo (Negative Type Numbers): FORTRAN LOGICAL fix.
12046
12047 Tue Jul 20 16:30:41 1993  Jim Kingdon  (kingdon@deneb.cygnus.com)
12048
12049         * Makefile.in (refcard.dvi): Use srcdir where necessary.
12050
12051 Mon Jul 19 12:02:50 1993  Roland H. Pesch  (pesch@cygnus.com)
12052
12053         * gdb.texinfo: repair conditional bugs in text markup
12054
12055 Fri Jul 16 18:57:50 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12056
12057         * gdb.texinfo, all-cfg.texi, h8-cfg.texi: introduce MOD2 switch
12058         to select Modula-2 material.
12059
12060 Thu Jul 15 13:15:01 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12061
12062         * stabs.texinfo: Cleanups regarding statics.
12063
12064         * gdbinv-s.texi (Bootstrapping): Document exceptionHandler.
12065         (Debug Session): Mention exceptionHandler.  Add xref to Bootstrapping.
12066
12067 Mon Jul 12 13:37:02 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12068
12069         * stabs.texinfo: N_MAIN is sometimes used for C.
12070
12071 Fri Jul  9 09:47:02 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
12072
12073         * gdbint.texinfo (Host, Target Conditionals): Remove TM_FILE_OVERRIDE.
12074
12075 Tue Jul  6 12:41:28 1993  John Gilmore  (gnu@cygnus.com)
12076
12077         * gdbint.texinfo (Target Conditionals): Remove NO_TYPEDEFS,
12078         removed from the code by Kingdon.
12079
12080 Tue Jul  6 12:24:34 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12081
12082         * gdb.texinfo (Break Commands): Remove stuff about flushing terminal
12083         input when evaluating breakpoint conditions; the bug has been fixed.
12084
12085         * gdb.texinfo (Continuing and Stepping): Argument to "continue"
12086         sets the ignore count to N-1, not to N.
12087
12088 Thu Jul  1 14:57:42 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12089
12090         * refcard.tex (\hoffset): correct longstanding error to match
12091           intended offset; avoids cutting off edge on some printers
12092
12093 Wed Jun 30 18:23:06 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12094
12095         * stabs.texinfo (Parameters): Say that order of stabs is significant.
12096
12097 Fri Jun 25 21:34:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12098
12099         * stabs.texinfo (Common Blocks): Say what Sun FORTRAN does.
12100
12101 Fri Jun 25 16:15:10 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12102
12103         * Makefile.in: (REFEDITS) new var to control whether PS or CM
12104         fonts and whether US or A4 paper for GDB refcard; (refcard.dvi)
12105         collect sed edits if any, apply to refcard before formatting;
12106         (refcard.ps) stop implying PS fonts if PS output requested;
12107         (lrefcard.ps) delete extra target for variant PS fonts
12108
12109         * refcard.tex: parametrize papersize dependent info, collect
12110           in easily replaced spot
12111
12112         * a4rc.sed: new file, edits to refcard for A4 paper
12113
12114 Fri Jun 25 14:21:46 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12115
12116         * stabs.texinfo (Negative Type Numbers): Type -16 is 4 bytes.
12117
12118 Wed Jun 23 15:02:50 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12119
12120         * stabs.texinfo (Negative Type Numbers): Minor character cleanups.
12121
12122 Tue Jun 22 16:31:52 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12123
12124         * stabs.texinfo: Express disapproval of 'D' symbol descriptor
12125         politely rather than rudely.
12126
12127 Fri Jun 18 19:42:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12128
12129         * stabs.texinfo: Document common blocks.
12130
12131 Fri Jun 18 12:12:57 1993  Fred Fish  (fnf@cygnus.com)
12132
12133         * stabs.texinfo:  Add some basic info about stabs-in-elf.
12134
12135 Fri Jun 18 13:57:09 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12136
12137         * stabs.texinfo (Top): Minor cleanup.
12138
12139 Mon Jun 14 16:16:51 1993  david d `zoo' zuhn  (zoo at rtl.cygnus.com)
12140
12141         * Makefile.in (install-info): remove parentdir support
12142
12143 Tue Jun 15 18:11:39 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12144
12145         * gdb.texinfo (Copying): delete this node and references to it;
12146         RMS says this manual need not carry GPL. (passim): Improvements
12147         from last round at FSF, largely due to Ian Taylor review, and
12148         minor formatting improvements.
12149
12150         * gdbinv-s.texi (passim): Improvements from last round at FSF,
12151         largely due to Ian Taylor review. (Debug Session): minor edits to
12152         new text.
12153
12154 Sun Jun 13 12:52:39 1993  Jim Kingdon  (kingdon@cygnus.com)
12155
12156         * Makefile.in (realclean): Remove info and dvi files too.
12157
12158 Sat Jun 12 16:09:22 1993  Jim Kingdon  (kingdon@cygnus.com)
12159
12160         * {all,h8}-config.texi: Rename to *-cfg.texi for 14 char filenames.
12161         * Makefile.in: Change accordingly.  gdb-config.texi -> gdb-cfg.texi.
12162         * gdb.texinfo: Change accordingly.
12163
12164         * stabs.texinfo: Clean up N_{L,R}BRAC.  Discuss what addresses of
12165         N_{L,R}BRAC,N_SLINE are relative to.
12166
12167 Fri Jun 11 15:15:55 1993  Jim Kingdon  (kingdon@cygnus.com)
12168
12169         * Makefile.in (GDBvn.texi): Update atomically.
12170
12171 Wed Jun  9 10:58:16 1993  Jim Kingdon  (kingdon@cygnus.com)
12172
12173         * gdbinv-s.texi (Debug Session): Document exceptionHook.
12174
12175 Tue Jun  8 13:42:04 1993  Jim Kingdon  (kingdon@cygnus.com)
12176
12177         * gdb.texinfo (Print Settings): Move all stuff relating to symbolic
12178         addresses together.  Also motivate the set print symbol-filename
12179         command and suggest other solutions.
12180
12181 Tue Jun  1 22:46:43 1993  Fred Fish  (fnf@cygnus.com)
12182
12183         * gdb.texinfo (set print elements):  Note that the number of
12184         elements is set to unlimited by "set print elements 0".
12185
12186 Mon May 31 08:06:55 1993  Jim Kingdon  (kingdon@cygnus.com)
12187
12188         * stabs.texinfo (Builtin Type Descriptors): Try to clarify what
12189         NF_LDOUBLE means.
12190         (Stab Types): Include Solaris stab types.
12191         (Procedures): Document Solaris extensions.
12192
12193 Thu May 27 06:20:42 1993  Peter Schauer  (pes@regent.e-technik.tu-muenchen.de)
12194
12195         * gdb.texinfo:  Add `set print symbol-filename' doc.
12196
12197 Wed May 26 00:26:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12198
12199         * stabs.texinfo (Arrays): Talk about type definition vs. type
12200         information.
12201
12202         * stabs.texinfo (Builtin Type Descriptors): Talk about omitting
12203         the trailing semicolon.
12204
12205 Tue May 25 14:49:42 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12206
12207         * stabs.texinfo (Line Numbers, Source Files): Re-write these two nodes
12208         and merge in other parts of the document addressing these subjects.
12209         gdbint.texinfo (XCOFF): Remove info which is now in stabs.texinfo.
12210
12211         * stabs.texinfo (Subranges, Arrays): Try to explain about the semicolon
12212         at the end of a range type.
12213
12214         * stabs.texinfo (Subranges): "A offset" and "T offset" are not
12215         AIX extensions.
12216
12217 Mon May 24 09:00:33 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12218
12219         * stabs.texinfo (Stabs Format):  Misc fixes.
12220
12221 Sat May 22 10:40:56 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12222
12223         * stabs.texinfo (Constants):  Allow an `e' constant to be non-enum.
12224         (Traditional builtin types): Document convex convention for long long.
12225         (Negative builtin types): Discuss type names, and misc fixes.
12226
12227 Fri May 21 11:20:31 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12228
12229         * stabs.texinfo (Builtin Type Descriptors): Document the floating
12230         point types used with @samp{R} type descriptor.
12231         (Symbol Descriptors): Describe how to handle conflict between
12232         different meanings of @samp{P} symbol descriptor.
12233
12234 Thu May 20 13:35:10 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12235
12236         * stabs.texinfo: Remove node Quick Reference and put its children
12237         directly under the main menu.
12238
12239         * stabs.texinfo: Many more changes to bring it into line with
12240         AIX documentation and reality.  I think it now has all the
12241         information from the AIX documentation, except that I burned
12242         out when I got to variant records (Pascal and Modula-2) and
12243         all the COBOL types.  Oh well, we can add them later when we're
12244         worrying more about those languages.
12245
12246         * stabs.texinfo (Automatic variables): Talk about what it means
12247         to omit the symbol descriptor.
12248
12249 Tue May 18 17:59:18 1993  Jim Kingdon  (kingdon@lioth.cygnus.com)
12250
12251         * stabs.texinfo (Parameters): Add "(sometimes)" when describing
12252         gcc2 behavior with promoted args.
12253
12254 Fri May 14 21:35:29 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12255
12256         * gdb.texinfo: include readline appendices in info version of manual
12257
12258 Fri May  7 11:56:18 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12259
12260         * gdbinv-s.texi (Remote Serial): describe new ^C behavior in
12261         target remote.
12262
12263         * gdb.texinfo (Machine Code): more index entries for disassemble
12264
12265 Fri May  7 10:12:30 1993  Fred Fish  (fnf@cygnus.com)
12266
12267         * Clarify the intended use of the gdb-testers and gdb-patches
12268         mailing lists, and shrink gzip comment.
12269
12270 Thu May  6 16:39:50 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12271
12272         * gdb.texinfo (Shell Commands): do not mention SHELL env var in
12273         DOSHOST configuration of manual.
12274
12275         * gdb.texinfo (MIPS Stack): new node.
12276
12277         * all-config.texi (MIPS) new switch.
12278
12279         * gdbinv-s.texi (Nindy Options) Remove two instances of future
12280         tense; (MIPS Remote) new node.
12281
12282         * gdb.texinfo (passim) rephrases to work around makeinfo @value
12283         bug; (Environment) less passive, other small cleanups in text about
12284         .cshrc/.bashrc; (Invoking GDB) new MIPS Remote menu entry;
12285         (Remote) new MIPS Remote menu entry.
12286
12287 Thu Apr 29 09:36:25 1993  Jim Kingdon  (kingdon@cygnus.com)
12288
12289         * stabs.texinfo: Many changes to include information from the
12290         AIX documentation.
12291
12292         * gdb.texinfo (Environment): Mention pitfall with .cshrc.
12293
12294 Tue Apr 27 14:02:57 1993  Jim Kingdon  (kingdon@cygnus.com)
12295
12296         * gdbint.texinfo (new node Debugging GDB, elsewhere):
12297         Move a bunch of information from ../README.
12298         (Getting Started): New node.
12299
12300 Fri Apr 23 17:21:13 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12301
12302         * gdbinv-s.texi, gdb.texinfo: include Hitachi SH target
12303
12304         * gdb.texinfo: advance manual revision dates to present
12305
12306         * gdbinv-s.texi, gdb.texinfo, all-config.texi, h8-config.texi:
12307         stop using silly Roman numerals in @set variable names
12308
12309 Fri Apr 23 07:30:01 1993  Jim Kingdon  (kingdon@cygnus.com)
12310
12311         * stabs.texinfo (Parameters): Keep trying to get this right.
12312
12313 Wed Apr 21 15:18:47 1993  Jim Kingdon  (kingdon@cygnus.com)
12314
12315         * stabs.texinfo (Parameters): More on "local parameters".
12316
12317 Mon Apr 19 08:00:51 1993  Jim Kingdon  (kingdon@cygnus.com)
12318
12319         * stabs.texinfo (Parameters): Re-do "local parameters" section.
12320
12321 Sun Apr 18 09:47:45 1993  Jim Kingdon  (kingdon@cygnus.com)
12322
12323         * stabs.texinfo (Symbol descriptors): Re-do using @table and @xref.
12324         (Parameters): Rewrite.
12325         (xcoff-differences, Sun-differences): Minor changes.
12326
12327 Thu Apr 15 02:35:24 1993  John Gilmore  (gnu@cacophony.cygnus.com)
12328
12329         * stabs.texinfo:  Minor cleanup.
12330
12331 Wed Apr 14 17:31:00 1993  Jim Kingdon  (kingdon@cygnus.com)
12332
12333         * gdbint.texinfo: Minor xcoff stuff.
12334
12335 Wed Apr  7 14:11:07 1993  Fred Fish  (fnf@cygnus.com)
12336
12337         * gdbint.texinfo:  Update for new config directory structure.
12338         Add info about internal type data structures.
12339
12340 Mon Apr  5 09:06:30 1993  Ian Lance Taylor  (ian@cygnus.com)
12341
12342         * Makefile.in (SFILES_INCLUDED): gdb-config.texi is no longer in
12343         $(srcdir).
12344         (gdb-config.texi): Depend on file in $(srcdir).
12345
12346 Fri Apr  2 16:55:13 1993  Jim Kingdon  (kingdon@cygnus.com)
12347
12348         * stabs.texinfo: Fixes about N_SO.
12349
12350 Fri Mar 26 18:00:35 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12351
12352         * gdb.texinfo: include list of nonstandard init file names
12353
12354         * *-config.texi: new switch GENERIC for text that applies *only*
12355         to (usual) multiple-target version of manual
12356
12357         * gdb.texinfo, gdbinv-s.texi: Update conditional markup to correct
12358         h8 config
12359
12360         * gdb.texinfo: depend on latest fixed makeinfo, use conditionals
12361         in menus (rather than conditionally selected multiple alternative
12362         menus).
12363
12364         * Makefile.in: define and use DOC_CONFIG var to select
12365         configuration for GDB user manual.
12366
12367         * gdb-config.texi: delete from repository, generate from Makefile.
12368
12369         * all-config.texi: normal `generic' configuration file, formerly
12370         stored as gdb-config.texi
12371
12372 Wed Mar 24 14:03:19 1993  david d `zoo' zuhn  (zoo at poseidon.cygnus.com)
12373
12374         * Makefile.in: add dvi target to build all .dvi files
12375
12376 Tue Mar 23 16:03:24 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12377
12378         * gdb.texinfo, gdvinv-s.texinfo: formatting improvements.
12379
12380 Fri Mar 19 21:46:50 1993  John Gilmore  (gnu@cygnus.com)
12381
12382         * gdbint.texinfo:  Doc NO_MMALLOC and NO_MMALLOC_CHECK as
12383         host conditionals.
12384         * stabs.texinfo:  More array fixes inspired by Jim's.
12385
12386 Fri Mar 19 10:23:34 1993  Jim Kingdon  (kingdon@cygnus.com)
12387
12388         * stabs.texinfo: Fixes re arrays and continuations.
12389
12390         * gdbint.texinfo: Add XCOFF node.
12391
12392 Mon Mar  8 15:52:18 1993  John Gilmore  (gnu@cygnus.com)
12393
12394         * gdb.texinfo:  Add `set print max-symbolic-offset' doc.
12395
12396 Sun Feb 21 17:09:38 1993  Per Bothner  (bothner@rtl.cygnus.com)
12397
12398         * stabs.texinfo:  Fix for array types to mention lower bounds.
12399
12400 Thu Feb 18 01:19:49 1993  John Gilmore  (gnu@cygnus.com)
12401
12402         * gdbint.texinfo:  Update PTRACE_ARG3_TYPE doc, pull PT_*.
12403
12404 Wed Feb 17 08:15:24 1993  John Gilmore  (gnu@cygnus.com)
12405
12406         * gdbint.texinfo:  Remove SET_STACK_LIMIT_HUGE from target defines.
12407
12408 Thu Feb 11 10:38:40 1993  John Gilmore  (gnu@cygnus.com)
12409
12410         * gdbint.texinfo:  Fix thinko (NM_FILE => NAT_FILE).  Found
12411         by Michael Ben-Gershon <mybg@CS.HUJI.AC.IL>.
12412
12413 Wed Feb 10 23:59:19 1993  John Gilmore  (gnu@cygnus.com)
12414
12415         * gdbint.texinfo:  Eliminate IBM6000_HOST, document IBM6000_TARGET.
12416
12417 Tue Feb  9 18:26:21 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12418
12419         * gdb.texinfo, gdbinv-s.texi: misc updates
12420
12421 Sat Feb  6 10:25:47 1993  John Gilmore  (gnu@cygnus.com)
12422
12423         * gdbint.texinfo:  Brief documentation for longjmp support,
12424         from an email msg by Stu.
12425
12426 Fri Feb  5 14:10:15 1993  John Gilmore  (gnu@cygnus.com)
12427
12428         * stabs.texinfo:  Fix description of floating point "range"
12429         types (which really define basic types).  Reported by Jim Meehan,
12430         <meehan@src.dec.com>.
12431
12432         * gdbint.texinfo:  Remove COFF_NO_LONG_FILE_NAMES define, now gone.
12433
12434 Thu Feb  4 13:56:46 1993  Ian Lance Taylor  (ian@cygnus.com)
12435
12436         * gdbint.texinfo: Slightly expand section on supporting a new
12437         object file format.
12438
12439 Thu Feb  4 01:49:04 1993  John Gilmore  (gnu@cygnus.com)
12440
12441         * Makefile.in (refcard.ps, lrefcard.ps):  Remove psref.tex
12442         intermediate file.
12443
12444 Tue Feb  2 12:18:06 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12445
12446         * gdb.texinfo, gdbinv-s.texi: miscellaneous stylistic cleanups
12447
12448 Mon Feb  1 15:35:47 1993  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12449
12450         * gdbinv-s.texi: z8000 simulator target name is just "sim"
12451
12452         * gdbinv-s.texi:  Mention that Z8000 simulator can simulate Z8001
12453         as well as Z8002.
12454
12455 Sat Nov 28 06:51:35 1992  John Gilmore  (gnu@cygnus.com)
12456
12457         * gdbint.texinfo:  Add sections on clean design and on how to send
12458         in changes.
12459
12460 Mon Nov  9 23:57:02 1992  John Gilmore  (gnu@cygnus.com)
12461
12462         * gdbint.texinfo:  Add how to declare the result of make_cleanup.
12463
12464 Mon Oct 26 11:09:47 1992  John Gilmore  (gnu@cygnus.com)
12465
12466         * gdb.texinfo:  Fix typo, reported by Karl Berry.
12467
12468 Fri Oct 23 00:41:21 1992  John Gilmore  (gnu@cygnus.com)
12469
12470         * gdb.texinfo:  Add opcodes dir to GDB distribution description.
12471
12472 Sat Oct 10 18:04:58 1992  david d `zoo' zuhn  (zoo at cirdan.cygnus.com)
12473
12474         * gdbint.texinfo: fixed a stray email address (needs @@),
12475         added @table @code to node "Native Conditionals"
12476
12477 Tue Sep 22 00:34:15 1992  John Gilmore  (gnu@cygnus.com)
12478
12479         * gdbint.texinfo:  Describe coding style of GDB.
12480
12481 Mon Sep 21 19:32:16 1992  John Gilmore  (gnu@cygnus.com)
12482
12483         * stabs.texinfo:  Minor wording changes.
12484
12485 Tue Sep 15 02:57:09 1992  John Gilmore  (gnu@cygnus.com)
12486
12487         * gdbint.texinfo:  Improve release doc slightly.
12488
12489 Fri Sep 11 01:34:25 1992  John Gilmore  (gnu@sphagnum.cygnus.com)
12490
12491         * gdbint.texinfo:  Improve doc of GDB config macros.
12492
12493 Wed Sep  9 16:52:06 1992  John Gilmore  (gnu@cygnus.com)
12494
12495         * stabs.texinfo:  Remove Bothner's changes for C++ nested types.
12496         These will be reinserted when examined.
12497
12498 Mon Aug 24 01:17:55 1992  John Gilmore  (gnu@cygnus.com)
12499
12500         * gdbint.texinfo:  Make a start at documenting all the #if macros
12501         in GDB.  At least list them all, and start separating them into
12502         host-specific and target-specific.
12503
12504 Tue Aug 18 15:59:13 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12505
12506         * gdbinv-s.m4.in: refrain from using @cartouche for just a few
12507         examples (not consistent w others).
12508         gdb.texinfo: issue disclaimer paragraph on cmdline options only
12509         for generic vn of doc
12510
12511 Tue Aug 18 14:53:27 1992  Ian Lance Taylor  (ian@cygnus.com)
12512
12513         * Makefile.in: always create installation directories.
12514
12515 Tue Aug 18 14:11:50 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12516
12517         * gdb.texinfo: in h8 config, do not describe searching commands.
12518
12519 Mon Aug 17 18:07:59 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12520
12521         * gdb.texinfo, none.m4, h8.m4, gdbinv-s.m4.in: improve H8/300
12522           conditionals; introduce a few generic switches that may be
12523           useful for other cross-dev or dos-hosted configs.
12524
12525         * gdb.texinfo: fix typo in "info reg" description
12526
12527 Sun Aug 16 01:16:18 1992  John Gilmore  (gnu@cygnus.com)
12528
12529         * stabs.texinfo:  Minor updates from running TeX over it.
12530         * Makefile.in (stabs.dvi, stabs.ps):  Add.
12531
12532 Sat Aug 15 20:52:24 1992  Per Bothner  (bothner@rtl.cygnus.com)
12533
12534         * stabs.texinfo:  Stabs documentation, written by Julia Menapace.
12535         First pass at converting it to texinfo.
12536
12537 Sat Aug 15 03:14:59 1992  John Gilmore  (gnu@cygnus.com)
12538
12539         * gdb.texinfo, refcard.tex:  Document mult args on `info reg'.
12540         * Makefile.in (refcard.ps, lrefcard.ps):  Add missing $(srdir).
12541
12542 Fri Aug 14 21:08:47 1992  John Gilmore  (gnu@cygnus.com)
12543
12544         * gdbint.texinfo:  Add section on partial symbol tables.
12545
12546 Sat Jun 20 16:31:10 1992  John Gilmore  (gnu at cygnus.com)
12547
12548         * gdb.texinfo:  document `set remotedebug' and `set
12549         rstack_high_address'.
12550
12551 Thu May 14 17:09:48 1992  Roland H. Pesch  (pesch@fowanton.cygnus.com)
12552
12553         * gdb.texinfo: slight expansion of new text on reading info files
12554         * gdbinv-s.m4.in: correct and expand info on cross-debugging
12555         H8/300 from DOS.
12556
12557 Tue May 12 12:22:47 1992  John Gilmore  (gnu at cygnus.com)
12558
12559         * gdb.texinfo:  `info user' => `show user'.  Noticed by David Taylor.
12560
12561 Mon May 11 19:06:27 1992  John Gilmore  (gnu at cygnus.com)
12562
12563         * gdb.texinfo:  Say how to read the `info' files.
12564
12565 Tue May  5 12:11:38 1992  K. Richard Pixley  (rich@cygnus.com)
12566
12567         * Makefile.in: gm4 -> m4.
12568
12569 Fri Apr 10 17:50:43 1992  John Gilmore  (gnu at rtl.cygnus.com)
12570
12571         * gdb.texinfo:  Update for GDB-4.5.  Move `Formatting
12572         Documentation' ahead of `Installing GDB' to match README.
12573         Update shared library doc, -readnow and -mapped, and directory
12574         structure (add glob and mmalloc).  Update configure doc.
12575
12576 Tue Mar 24 23:28:38 1992  K. Richard Pixley  (rich@cygnus.com)
12577
12578         * Makefile.in: remove $(srcdir) from gdb.info rule.
12579
12580 Sat Mar  7 18:44:50 1992  K. Richard Pixley  (rich@rtl.cygnus.com)
12581
12582         * Makefile.in: commented out gdb-all.texinfo rule.  This is
12583           temporary.
12584
12585 Wed Feb 26 18:04:40 1992  K. Richard Pixley  (rich@cygnus.com)
12586
12587         * Makefile.in, configure.in: removed traces of namesubdir,
12588           -subdirs, $(subdir), $(unsubdir), some rcs triggers.  Forced
12589           copyrights to '92, '13, changed some from Cygnus to FSF.
12590
12591 Fri Dec 13 09:47:31 1991  John Gilmore  (gnu at cygnus.com)
12592
12593         * gdb.texinfo:  Improve how we ask for bug reports.
12594
12595 Tue Dec 10 04:07:21 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
12596
12597         * Makefile.in: infodir belongs in datadir.
12598
12599 Fri Dec  6 23:57:34 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
12600
12601         * Makefile.in: remove spaces following hyphens, bsd make can't
12602           cope.  install using INSTALL_DATA.  added clean-info.  added
12603           standards.text support.
12604
12605 Thu Dec  5 22:46:12 1991  K. Richard Pixley  (rich at rtl.cygnus.com)
12606
12607         * Makefile.in: idestdir and ddestdir go away.  Added copyrights
12608           and shift gpl to v2.  Added ChangeLog if it didn't exist. docdir
12609           and mandir now keyed off datadir by default.
12610
12611 \f
12612 Local Variables:
12613 mode: change-log
12614 left-margin: 8
12615 fill-column: 74
12616 version-control: never
12617 coding: utf-8
12618 End: