gdb/doc/Makefile.in

   1 ##Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1999, 2000, 2002, 2003,
   2 ##2007, 2008, 2009 Free Software Foundation, Inc.
   3
   4 # Makefile for GDB documentation.
   5 # This file is part of GDB.
   6
   7 # This program is free software; you can redistribute it and/or modify
   8 # it under the terms of the GNU General Public License as published by
   9 # the Free Software Foundation; either version 2 of the License, or
  10 # (at your option) any later version.
  11 #
  12 # This program is distributed in the hope that it will be useful,
  13 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  14 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15 # GNU General Public License for more details.
  16 #
  17 # You should have received a copy of the GNU General Public License
  18 # along with this program; if not, write to the Free Software
  19 # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
  20
  21 srcdir = @srcdir@
  22 VPATH = @srcdir@
  23
  24 prefix = @prefix@
  25
  26 infodir = @infodir@
  27 pdfdir = $(prefix)/share/doc/gdb
  28 htmldir = $(prefix)/html
  29
  30 SHELL = @SHELL@
  31
  32 LN_S = @LN_S@
  33
  34 INSTALL = @INSTALL@
  35 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  36 INSTALL_DATA = @INSTALL_DATA@
  37
  38 mkinstalldirs = $(SHELL) $(srcdir)/../../mkinstalldirs
  39
  40 # main GDB source directory
  41 gdbdir = $(srcdir)/..
  42
  43 # where to find texinfo; GDB dist should include a recent one
  44 TEXIDIR=${gdbdir}/../texinfo
  45
  46 # where to find makeinfo, preferably one designed for texinfo-2
  47 MAKEINFO=makeinfo
  48
  49 # Note that texinfo 4.0's makeinfo --html can only generate a
  50 # single file, which would be too large, so continue to use
  51 # texi2html. -sts 2000-03-28
  52 # Contrary to documentation, the current directory is not
  53 # searched by texi2html, so specify it explicitly.
  54 # -macro 2007-07-26
  55 MAKEHTML = texi2html
  56 MAKEHTMLFLAGS = -menu -split_chapter -I .
  57
  58 # where to find texi2roff, ditto
  59 TEXI2ROFF=texi2roff
  60
  61 # where to find texi2dvi, ditto
  62 TEXI2DVI=texi2dvi
  63
  64 # Package version and bug-reporting URL.
  65 PKGVERSION = @PKGVERSION@
  66 BUGURL_TEXI = @REPORT_BUGS_TEXI@
  67
  68 # Where is the source dir for the READLINE library doc?
  69 # Traditionally readline is in .. or .
  70 READLINE_DIR = ${gdbdir}/../readline/doc
  71
  72 # The GDB/MI docs come from a sibling directory ../mi
  73 GDBMI_DIR = ${gdbdir}/mi
  74
  75 SET_TEXINPUTS = \
  76    TEXINPUTS=${TEXIDIR}:.:$(srcdir):$(READLINE_DIR):$(GDBMI_DIR):$$TEXINPUTS
  77
  78 # Files which should be generated via 'info' and installed by 'install-info'
  79 INFO_DEPS = gdb.info gdbint.info stabs.info annotate.info
  80
  81 # Files which should be generated via 'pdf' and installed by 'install-pdf'
  82 PDFFILES = gdb.pdf gdbint.pdf stabs.pdf refcard.pdf annotate.pdf
  83
  84 # There may be alternate predefined collections of switches to configure
  85 # the GDB manual.  Normally this is not done in synch with the software
  86 # config system, since this choice tends to be independent; most people
  87 # want a doc config of `all' for a generic manual, regardless of sw config.
  88 DOC_CONFIG = all
  89
  90 # This list of sed edits will edit the GDB reference card
  91 # for what fonts and what papersize to use.
  92 # By default (NO edits applied), the refcard uses:
  93 #    - Computer Modern (CM) fonts
  94 #    - US letter paper (8.5x11in)
  95 # List some of the following files for alternative fonts and paper:
  96 #  a4rc.sed     use A4 paper (297 x 210 mm)
  97 #  psrc.sed     use PostScript fonts (Karl Berry short TeX names)
  98 # lpsrc.sed     use PostScript fonts (full PostScript names in TeX)
  99 # e.g. for A4, Postscript:  REFEDITS = a4rc.sed psrc.sed
 100 #      for A4, CM fonts:    REFEDITS = a4rc.sed
 101 #      for US, PS fonts:    REFEDITS = psrc.sed
 102 #      for default:
 103 REFEDITS =
 104
 105 # Don Knuth's TeX formatter
 106 TEX = tex
 107 PDFTEX = pdftex
 108
 109 # Program to generate Postscript files from DVI files.
 110 DVIPS = dvips
 111
 112 # Main GDB manual
 113 GDB_DOC_SOURCE_INCLUDES = \
 114         $(srcdir)/fdl.texi \
 115         $(srcdir)/gpl.texi \
 116         $(srcdir)/agentexpr.texi \
 117         $(READLINE_DIR)/rluser.texi \
 118         $(READLINE_DIR)/inc-hist.texinfo
 119 GDB_DOC_BUILD_INCLUDES = \
 120         gdb-cfg.texi \
 121         GDBvn.texi
 122 GDB_DOC_FILES = \
 123         $(srcdir)/gdb.texinfo \
 124         $(GDB_DOC_SOURCE_INCLUDES) \
 125         $(GDB_DOC_BUILD_INCLUDES)
 126
 127 # Internals Manual
 128 GDBINT_DOC_SOURCE_INCLUDES = \
 129         $(srcdir)/fdl.texi \
 130         $(srcdir)/observer.texi
 131 GDBINT_DOC_BUILD_INCLUDES = \
 132         gdb-cfg.texi \
 133         GDBvn.texi
 134 GDBINT_DOC_FILES = \
 135         $(srcdir)/gdbint.texinfo \
 136         $(GDBINT_DOC_SOURCE_INCLUDES) \
 137         $(GDBINT_DOC_BUILD_INCLUDES)
 138
 139 # Stabs manual: All files
 140 STABS_DOC_SOURCE_INCLUDES = \
 141         $(srcdir)/fdl.texi
 142 STABS_DOC_BUILD_INCLUDES =
 143 STABS_DOC_FILES = \
 144         $(srcdir)/stabs.texinfo \
 145         $(STABS_DOC_SOURCE_INCLUDES) \
 146         $(STABS_DOC_BUILD_INCLUDES)
 147
 148 # Annotate migration document
 149 ANNOTATE_DOC_SOURCE_INCLUDES = \
 150         $(srcdir)/fdl.texi
 151 ANNOTATE_DOC_BUILD_INCLUDES = \
 152         gdb-cfg.texi
 153 ANNOTATE_DOC_FILES = \
 154         $(srcdir)/annotate.texinfo \
 155         $(ANNOTATE_DOC_SOURCE_INCLUDES) \
 156         $(ANNOTATE_DOC_BUILD_INCLUDES)
 157
 158 #### Host, target, and site specific Makefile fragments come in here.
 159 ###
 160
 161 all:
 162
 163 info: $(INFO_DEPS)
 164 dvi: gdb.dvi gdbint.dvi stabs.dvi refcard.dvi annotate.dvi
 165 ps: gdb.ps gdbint.ps stabs.ps refcard.ps annotate.ps
 166 html: gdb_toc.html gdbint_toc.html stabs_toc.html annotate_toc.html
 167 pdf: $(PDFFILES)
 168 all-doc: info dvi ps # pdf
 169 diststuff: info
 170
 171 install-info: $(INFO_DEPS)
 172         $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(infodir)
 173         @list='$(INFO_DEPS)'; \
 174         for file in $$list; do \
 175           if test -f $$file; then d=.; else d=$(srcdir); fi; \
 176           for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
 177             if test -f $$d/$$ifile; then \
 178               echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
 179               $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
 180             else : ; fi; \
 181           done; \
 182         done
 183         $(POST_INSTALL)
 184         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 185           list='$(INFO_DEPS)'; \
 186           for file in $$list; do \
 187             echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
 188             install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
 189           done; \
 190         else : ; fi
 191
 192 uninstall-info:
 193         $(PRE_UNINSTALL)
 194         @if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
 195           ii=yes; \
 196         else ii=; fi; \
 197         list='$(INFO_DEPS)'; \
 198         for file in $$list; do \
 199           test -z "$$ii" \
 200             || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
 201         done
 202         $(NORMAL_UNINSTALL)
 203         list='$(INFO_DEPS)'; \
 204         for file in $$list; do \
 205           (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
 206         done
 207
 208 install-html: html
 209         for i in *.html ; do \
 210                 $(INSTALL_DATA) $$i $(DESTDIR)$(htmldir)/$$i ; \
 211         done
 212
 213 pdf__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 214
 215 install-pdf: $(PDFFILES)
 216         @$(NORMAL_INSTALL)
 217         test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)"
 218         @list='$(PDFFILES)'; for p in $$list; do \
 219           if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 220           f=$(pdf__strip_dir) \
 221           echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
 222           $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
 223         done
 224
 225 STAGESTUFF = *.info* gdb-all.texi GDBvn.texi *.ps *.dvi *.pdf
 226
 227 # Copy the object files from a particular stage into a subdirectory.
 228 stage1: force
 229         -mkdir stage1
 230         -mv $(STAGESTUFF) stage1
 231
 232 stage2: force
 233         -mkdir stage2
 234         -mv $(STAGESTUFF) stage2
 235
 236 stage3: force
 237         -mkdir stage3
 238         -mv $(STAGESTUFF) stage3
 239
 240 against=stage2
 241
 242 comparison: force
 243         for i in $(STAGESTUFF) ; do cmp $$i $(against)/$$i ; done
 244
 245 de-stage1: force
 246         -(cd stage1 ; mv -f * ..)
 247         -rmdir stage1
 248
 249 de-stage2: force
 250         -(cd stage2 ; mv -f * ..)
 251         -rmdir stage2
 252
 253 de-stage3: force
 254         -(cd stage3 ; mv -f * ..)
 255         -rmdir stage3
 256
 257 # GDB QUICK REFERENCE (dvi output)
 258 refcard.dvi : refcard.tex $(REFEDITS)
 259         echo > tmp.sed
 260         for f in x $(REFEDITS) ; do \
 261                 test x$$f = xx && continue ; \
 262                 cat $(srcdir)/$$f >>tmp.sed ; \
 263         done
 264         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 265         $(SET_TEXINPUTS) $(TEX) sedref.tex
 266         mv sedref.dvi refcard.dvi
 267         rm -f sedref.log sedref.tex tmp.sed
 268
 269 refcard.ps : refcard.dvi
 270         $(DVIPS) -t landscape -o $@ $?
 271
 272 refcard.pdf : refcard.tex $(REFEDITS)
 273         echo > tmp.sed
 274         for f in x $(REFEDITS) ; do \
 275                 test x$$f = xx && continue ; \
 276                 cat $(srcdir)/$$f >>tmp.sed ; \
 277         done
 278         sed -f tmp.sed $(srcdir)/refcard.tex >sedref.tex
 279         $(SET_TEXINPUTS) $(PDFTEX) sedref.tex
 280         mv sedref.pdf refcard.pdf
 281         rm -f sedref.log sedref.tex tmp.sed
 282
 283 # File to record current GDB version number (copied from main dir version.in)
 284 GDBvn.texi : ${gdbdir}/version.in
 285         echo "@set GDBVN `sed q $(srcdir)/../version.in`" > ./GDBvn.new
 286         if [ -n "$(PKGVERSION)" ]; then \
 287           echo "@set VERSION_PACKAGE $(PKGVERSION)" >> ./GDBvn.new; \
 288         fi
 289         echo "@set BUGURL $(BUGURL_TEXI)" >> ./GDBvn.new
 290         if [ "$(BUGURL_TEXI)" = "@uref{http://www.gnu.org/software/gdb/bugs/}" ]; then \
 291           echo "@set BUGURL_DEFAULT" >> ./GDBvn.new; \
 292         fi
 293         mv GDBvn.new GDBvn.texi
 294
 295 # Updated atomically
 296 .PRECIOUS: GDBvn.texi
 297
 298 # Choose configuration for GDB manual (normally `all'; normally not tied into
 299 # `configure' script because most users prefer generic version of manual,
 300 # not one for their binary config---which may not be specifically
 301 # defined anyways).
 302 gdb-cfg.texi: ${srcdir}/${DOC_CONFIG}-cfg.texi
 303         (test "$(LN_S)" = "ln -s" && \
 304           ln -s ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi) || \
 305         ln ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi || \
 306         cp ${srcdir}/${DOC_CONFIG}-cfg.texi gdb-cfg.texi
 307
 308 # GDB MANUAL: texinfo source, using @set/@clear/@value/@ifset/@ifclear
 309 # If your texinfo or makeinfo don't support these, get a new texinfo release
 310 #
 311 # The nonsense with GDBvn.texi gets this to run with both Sun and GNU make.
 312 #   Note that we can *generate* GDBvn.texi, but since we distribute one in the
 313 #   source directory for the benefit of people who *don't* use this makefile,
 314 #   VPATH will often tell make not to bother building it, because the one
 315 #   in the srcdir is up to date.  (if not, then make should build one here).
 316
 317 # Clean these up before each run.  Avoids a catch 22 with not being
 318 # able to re-generate these files (to fix a corruption) because these
 319 # files contain a corruption.
 320 GDB_TEX_TMPS = gdb.aux gdb.cp* gdb.fn* gdb.ky* gdb.log gdb.pg* gdb.toc \
 321         gdb.tp* gdb.vr*
 322
 323 # GDB MANUAL: TeX dvi file
 324 gdb.dvi: ${GDB_DOC_FILES}
 325         if [ ! -f ./GDBvn.texi ]; then \
 326                 (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 327                 ln $(srcdir)/GDBvn.texi . || \
 328                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 329         rm -f $(GDB_TEX_TMPS)
 330         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdb.texinfo
 331
 332 gdb.ps: gdb.dvi
 333         $(DVIPS) -o $@ $?
 334
 335 gdb.pdf: ${GDB_DOC_FILES}
 336         if [ ! -f ./GDBvn.texi ]; then \
 337                 (test "$(LN_S)" = "ln -s" && ln -s $(srcdir)/GDBvn.texi .) || \
 338                 ln $(srcdir)/GDBvn.texi . || \
 339                 cp $(srcdir)/GDBvn.texi . ; else true; fi
 340         rm -f $(GDB_TEX_TMPS)
 341         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdb.texinfo
 342
 343 # GDB MANUAL: info file
 344 gdb.info: ${GDB_DOC_FILES}
 345         $(MAKEINFO) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) \
 346                 -o gdb.info $(srcdir)/gdb.texinfo
 347
 348 # GDB MANUAL: roff translations
 349 # Try to use a recent texi2roff.  v2 was put on prep in jan91.
 350 # If you want an index, see texi2roff doc for postprocessing
 351 # and add -i to texi2roff invocations below.
 352 # Workarounds for texi2roff-2 (probably fixed in later texi2roff's, delete
 353 #    corresponding -e lines when later texi2roff's are current)
 354 # + @ifinfo's deleted explicitly due to texi2roff-2 bug w nested constructs.
 355 # + @c's deleted explicitly because texi2roff sees texinfo commands in them
 356 # + @   (that's at-BLANK) not recognized by texi2roff, turned into blank
 357 # + @alphaenumerate is ridiculously new, turned into @enumerate
 358
 359 # texi2roff doesn't have a notion of include dirs, so we have to fake
 360 # it out for gdb manual's include files---but only if not configured
 361 # in main sourcedir.
 362 links2roff: $(GDB_DOC_SOURCE_INCLUDES)
 363         if [ ! -f gdb.texinfo ]; then \
 364                 (test "$(LN_S)" = "ln -s" && ln -s $(GDB_DOC_SOURCE_INCLUDES) .) || \
 365                 ln $(GDB_DOC_SOURCE_INCLUDES)    . || \
 366                 cp $(GDB_DOC_SOURCE_INCLUDES)    . ; \
 367         fi
 368         touch links2roff
 369
 370 # gdb manual suitable for [gtn]roff -me
 371 gdb.me: $(GDB_DOC_FILES) links2roff
 372         sed -e '/\\input texinfo/d' \
 373                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 374                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 375                 -e '/^@c /d' \
 376                 -e 's/{.*,,/{/' \
 377                 -e 's/@ / /g' \
 378                 -e 's/^@alphaenumerate/@enumerate/g' \
 379                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 380                 $(srcdir)/gdb.texinfo | \
 381         $(TEXI2ROFF) -me | \
 382         sed -e 's/---/\\(em/g' \
 383         >gdb.me
 384
 385 # gdb manual suitable for [gtn]roff -ms
 386 gdb.ms: $(GDB_DOC_FILES) links2roff
 387         sed -e '/\\input texinfo/d' \
 388                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 389                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 390                 -e '/^@c /d' \
 391                 -e 's/{.*,,/{/' \
 392                 -e 's/@ / /g' \
 393                 -e 's/^@alphaenumerate/@enumerate/g' \
 394                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 395                 $(srcdir)/gdb.texinfo | \
 396         $(TEXI2ROFF) -ms | \
 397         sed -e 's/---/\\(em/g' \
 398         >gdb.ms
 399
 400 # gdb manual suitable for [tn]roff -mm
 401 # '@noindent's removed due to texi2roff-2 mm bug; if yours is newer,
 402 #   try leaving them in
 403 gdb.mm: $(GDB_DOC_FILES) links2roff
 404         sed -e '/\\input texinfo/d' \
 405                 -e '/@c TEXI2ROFF-KILL/,/@c END TEXI2ROFF-KILL/d' \
 406                 -e '/^@ifinfo/,/^@end ifinfo/d' \
 407                 -e '/^@c /d' \
 408                 -e 's/{.*,,/{/' \
 409                 -e '/@noindent/d' \
 410                 -e 's/@ / /g' \
 411                 -e 's/^@alphaenumerate/@enumerate/g' \
 412                 -e 's/^@end alphaenumerate/@end enumerate/g' \
 413                 $(srcdir)/gdb.texinfo | \
 414         $(TEXI2ROFF) -mm | \
 415         sed -e 's/---/\\(em/g' \
 416         >gdb.mm
 417
 418 # GDB MANUAL: HTML file
 419
 420 gdb_toc.html: ${GDB_DOC_FILES}
 421         $(MAKEHTML) $(MAKEHTMLFLAGS) -I ${READLINE_DIR} -I ${GDBMI_DIR} -I $(srcdir) $(srcdir)/gdb.texinfo
 422
 423 # Clean these up before each run.  Avoids a catch 22 with not being
 424 # able to re-generate these files (to fix a corruption) because these
 425 # files contain a corruption.
 426 GDBINT_TEX_TMPS = gdbint.aux gdbint.cp* gdbint.fn* gdbint.ky* \
 427         gdbint.log gdbint.pg* gdbint.toc gdbint.tp* gdbint.vr*
 428
 429 # GDB INTERNALS MANUAL: TeX dvi file
 430 gdbint.dvi: $(GDBINT_DOC_FILES)
 431         rm -f $(GDBINT_TEX_TMPS)
 432         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/gdbint.texinfo
 433
 434 gdbint.ps : gdbint.dvi
 435         $(DVIPS) -o $@ $?
 436
 437 gdbint.pdf: $(GDBINT_DOC_FILES)
 438         rm -f $(GDBINT_TEX_TMPS)
 439         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/gdbint.texinfo
 440
 441 # GDB INTERNALS MANUAL: info file
 442
 443 gdbint.info: $(GDBINT_DOC_FILES)
 444         $(MAKEINFO) -I $(srcdir) -o gdbint.info $(srcdir)/gdbint.texinfo
 445
 446 # GDB INTERNALS MANUAL: HTML file
 447
 448 gdbint_toc.html: $(GDBINT_DOC_FILES)
 449         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/gdbint.texinfo
 450
 451 stabs.info: $(STABS_DOC_FILES)
 452         $(MAKEINFO) -I $(srcdir) -o stabs.info $(srcdir)/stabs.texinfo
 453
 454 # STABS DOCUMENTATION: HTML file
 455
 456 stabs_toc.html: $(STABS_DOC_FILES)
 457         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/stabs.texinfo
 458
 459 # Clean these up before each run.  Avoids a catch 22 with not being
 460 # able to re-generate these files (to fix a corruption) because these
 461 # files contain a corruption.
 462 STABS_TEX_TMPS = stabs.aux stabs.cp* stabs.fn* stabs.ky* \
 463         stabs.log stabs.pg* stabs.toc stabs.tp* stabs.vr*
 464
 465 # STABS DOCUMENTATION: TeX dvi file
 466 stabs.dvi : $(STABS_DOC_FILES)
 467         rm -f $(STABS_TEX_TMPS)
 468         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/stabs.texinfo
 469
 470 stabs.ps: stabs.dvi
 471         $(DVIPS) -o $@ $?
 472
 473 stabs.pdf: $(STABS_DOC_FILES)
 474         rm -f $(STABS_TEX_TMPS)
 475         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/stabs.texinfo
 476
 477 # Clean these up before each run.  Avoids a catch 22 with not being
 478 # able to re-generate these files (to fix a corruption) because these
 479 # files contain a corruption.
 480 ANNOTATE_TEX_TMPS = annotate.aux annotate.cp* annotate.fn* annotate.ky* \
 481         annotate.log annotate.pg* annotate.toc annotate.tp* annotate.vr*
 482
 483 # ANNOTATE DOCUMENTATION: TeX dvi file
 484 annotate.dvi : $(ANNOTATE_DOC_FILES)
 485         rm -f $(ANNOTATE_TEX_TMPS)
 486         $(SET_TEXINPUTS) $(TEXI2DVI) $(srcdir)/annotate.texinfo
 487
 488 annotate.ps: annotate.dvi
 489         $(DVIPS) -o $@ $?
 490
 491 annotate.pdf: $(ANNOTATE_DOC_FILES)
 492         rm -f $(ANNOTATE_TEX_TMPS)
 493         $(SET_TEXINPUTS) $(TEXI2DVI) --pdf $(srcdir)/annotate.texinfo
 494
 495 annotate.info: $(ANNOTATE_DOC_FILES)
 496         $(MAKEINFO)  -I $(srcdir) -o annotate.info $(srcdir)/annotate.texinfo
 497
 498 annotate_toc.html: $(ANNOTATE_DOC_FILES)
 499         $(MAKEHTML) $(MAKEHTMLFLAGS) $(srcdir)/annotate.texinfo
 500
 501 force:
 502
 503 Makefile: Makefile.in $(host_makefile_frag) config.status
 504         $(SHELL) ./config.status
 505
 506
 507 # The "least clean" level of cleaning.  Get rid of files which are
 508 # automatically generated files that are just intermediate files,
 509
 510 mostlyclean:
 511         rm -f gdb.mm gdb.ms gdb.me links2roff
 512         rm -f $(GDB_TEX_TMPS)
 513         rm -f $(GDBINT_TEX_TMPS)
 514         rm -f $(STABS_TEX_TMPS)
 515         rm -f $(ANNOTATE_TEX_TMPS)
 516         rm -f sedref.dvi sedref.tex tmp.sed
 517
 518 clean: mostlyclean
 519         rm -f gdb-cfg.texi
 520
 521 distclean: clean
 522         rm -f Makefile config.status config.log
 523
 524 # GDBvn.texi, the dvi files, the info files, and the postscript files,
 525 # are all part of the distribution, so it should not be removed by
 526 # "clean" or "distclean".  Use maintainer-clean to remove them.
 527
 528 maintainer-clean realclean: distclean
 529         rm -f GDBvn.texi *.info* *.dvi *.ps *.html *.pdf
 530
 531 install: install-info
 532
 533 uninstall: uninstall-info