1 /* Low level interface to ptrace, for the remote server for GDB.
2 Copyright (C) 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
3 2006, 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
21 #include "linux-low.h"
25 #include <sys/param.h>
26 #include <sys/ptrace.h>
28 #include <sys/ioctl.h>
34 #include <sys/syscall.h>
38 #include <sys/types.h>
44 /* Don't include <linux/elf.h> here. If it got included by gdb_proc_service.h
45 then ELFMAG0 will have been defined. If it didn't get included by
46 gdb_proc_service.h then including it will likely introduce a duplicate
47 definition of elf_fpregset_t. */
52 #define SPUFS_MAGIC 0x23c9b64e
55 #ifndef PTRACE_GETSIGINFO
56 # define PTRACE_GETSIGINFO 0x4202
57 # define PTRACE_SETSIGINFO 0x4203
64 /* If the system headers did not provide the constants, hard-code the normal
66 #ifndef PTRACE_EVENT_FORK
68 #define PTRACE_SETOPTIONS 0x4200
69 #define PTRACE_GETEVENTMSG 0x4201
71 /* options set using PTRACE_SETOPTIONS */
72 #define PTRACE_O_TRACESYSGOOD 0x00000001
73 #define PTRACE_O_TRACEFORK 0x00000002
74 #define PTRACE_O_TRACEVFORK 0x00000004
75 #define PTRACE_O_TRACECLONE 0x00000008
76 #define PTRACE_O_TRACEEXEC 0x00000010
77 #define PTRACE_O_TRACEVFORKDONE 0x00000020
78 #define PTRACE_O_TRACEEXIT 0x00000040
80 /* Wait extended result codes for the above trace options. */
81 #define PTRACE_EVENT_FORK 1
82 #define PTRACE_EVENT_VFORK 2
83 #define PTRACE_EVENT_CLONE 3
84 #define PTRACE_EVENT_EXEC 4
85 #define PTRACE_EVENT_VFORK_DONE 5
86 #define PTRACE_EVENT_EXIT 6
88 #endif /* PTRACE_EVENT_FORK */
90 /* We can't always assume that this flag is available, but all systems
91 with the ptrace event handlers also have __WALL, so it's safe to use
94 #define __WALL 0x40000000 /* Wait for any child. */
98 #define W_STOPCODE(sig) ((sig) << 8 | 0x7f)
102 #if !(defined(__UCLIBC_HAS_MMU__) || defined(__ARCH_HAS_MMU__))
107 /* ``all_threads'' is keyed by the LWP ID, which we use as the GDB protocol
108 representation of the thread ID.
110 ``all_lwps'' is keyed by the process ID - which on Linux is (presently)
111 the same as the LWP ID.
113 ``all_processes'' is keyed by the "overall process ID", which
114 GNU/Linux calls tgid, "thread group ID". */
116 struct inferior_list all_lwps
;
118 /* A list of all unknown processes which receive stop signals. Some other
119 process will presumably claim each of these as forked children
122 struct inferior_list stopped_pids
;
124 /* FIXME this is a bit of a hack, and could be removed. */
125 int stopping_threads
;
127 /* FIXME make into a target method? */
128 int using_threads
= 1;
130 /* True if we're presently stabilizing threads (moving them out of
132 static int stabilizing_threads
;
134 /* This flag is true iff we've just created or attached to our first
135 inferior but it has not stopped yet. As soon as it does, we need
136 to call the low target's arch_setup callback. Doing this only on
137 the first inferior avoids reinializing the architecture on every
138 inferior, and avoids messing with the register caches of the
139 already running inferiors. NOTE: this assumes all inferiors under
140 control of gdbserver have the same architecture. */
141 static int new_inferior
;
143 static void linux_resume_one_lwp (struct lwp_info
*lwp
,
144 int step
, int signal
, siginfo_t
*info
);
145 static void linux_resume (struct thread_resume
*resume_info
, size_t n
);
146 static void stop_all_lwps (int suspend
, struct lwp_info
*except
);
147 static void unstop_all_lwps (int unsuspend
, struct lwp_info
*except
);
148 static int linux_wait_for_event (ptid_t ptid
, int *wstat
, int options
);
149 static void *add_lwp (ptid_t ptid
);
150 static int linux_stopped_by_watchpoint (void);
151 static void mark_lwp_dead (struct lwp_info
*lwp
, int wstat
);
152 static int linux_core_of_thread (ptid_t ptid
);
153 static void proceed_all_lwps (void);
154 static int finish_step_over (struct lwp_info
*lwp
);
155 static CORE_ADDR
get_stop_pc (struct lwp_info
*lwp
);
156 static int kill_lwp (unsigned long lwpid
, int signo
);
157 static void linux_enable_event_reporting (int pid
);
159 /* True if the low target can hardware single-step. Such targets
160 don't need a BREAKPOINT_REINSERT_ADDR callback. */
163 can_hardware_single_step (void)
165 return (the_low_target
.breakpoint_reinsert_addr
== NULL
);
168 /* True if the low target supports memory breakpoints. If so, we'll
169 have a GET_PC implementation. */
172 supports_breakpoints (void)
174 return (the_low_target
.get_pc
!= NULL
);
177 /* Returns true if this target can support fast tracepoints. This
178 does not mean that the in-process agent has been loaded in the
182 supports_fast_tracepoints (void)
184 return the_low_target
.install_fast_tracepoint_jump_pad
!= NULL
;
187 struct pending_signals
191 struct pending_signals
*prev
;
194 #define PTRACE_ARG3_TYPE void *
195 #define PTRACE_ARG4_TYPE void *
196 #define PTRACE_XFER_TYPE long
198 #ifdef HAVE_LINUX_REGSETS
199 static char *disabled_regsets
;
200 static int num_regsets
;
203 /* The read/write ends of the pipe registered as waitable file in the
205 static int linux_event_pipe
[2] = { -1, -1 };
207 /* True if we're currently in async mode. */
208 #define target_is_async_p() (linux_event_pipe[0] != -1)
210 static void send_sigstop (struct lwp_info
*lwp
);
211 static void wait_for_sigstop (struct inferior_list_entry
*entry
);
213 /* Accepts an integer PID; Returns a string representing a file that
214 can be opened to get info for the child process.
215 Space for the result is malloc'd, caller must free. */
218 linux_child_pid_to_exec_file (int pid
)
222 name1
= xmalloc (MAXPATHLEN
);
223 name2
= xmalloc (MAXPATHLEN
);
224 memset (name2
, 0, MAXPATHLEN
);
226 sprintf (name1
, "/proc/%d/exe", pid
);
227 if (readlink (name1
, name2
, MAXPATHLEN
) > 0)
239 /* Return non-zero if HEADER is a 64-bit ELF file. */
242 elf_64_header_p (const Elf64_Ehdr
*header
)
244 return (header
->e_ident
[EI_MAG0
] == ELFMAG0
245 && header
->e_ident
[EI_MAG1
] == ELFMAG1
246 && header
->e_ident
[EI_MAG2
] == ELFMAG2
247 && header
->e_ident
[EI_MAG3
] == ELFMAG3
248 && header
->e_ident
[EI_CLASS
] == ELFCLASS64
);
251 /* Return non-zero if FILE is a 64-bit ELF file,
252 zero if the file is not a 64-bit ELF file,
253 and -1 if the file is not accessible or doesn't exist. */
256 elf_64_file_p (const char *file
)
261 fd
= open (file
, O_RDONLY
);
265 if (read (fd
, &header
, sizeof (header
)) != sizeof (header
))
272 return elf_64_header_p (&header
);
276 delete_lwp (struct lwp_info
*lwp
)
278 remove_thread (get_lwp_thread (lwp
));
279 remove_inferior (&all_lwps
, &lwp
->head
);
280 free (lwp
->arch_private
);
284 /* Add a process to the common process list, and set its private
287 static struct process_info
*
288 linux_add_process (int pid
, int attached
)
290 struct process_info
*proc
;
292 /* Is this the first process? If so, then set the arch. */
293 if (all_processes
.head
== NULL
)
296 proc
= add_process (pid
, attached
);
297 proc
->private = xcalloc (1, sizeof (*proc
->private));
299 if (the_low_target
.new_process
!= NULL
)
300 proc
->private->arch_private
= the_low_target
.new_process ();
305 /* Wrapper function for waitpid which handles EINTR, and emulates
306 __WALL for systems where that is not available. */
309 my_waitpid (int pid
, int *status
, int flags
)
314 fprintf (stderr
, "my_waitpid (%d, 0x%x)\n", pid
, flags
);
318 sigset_t block_mask
, org_mask
, wake_mask
;
321 wnohang
= (flags
& WNOHANG
) != 0;
322 flags
&= ~(__WALL
| __WCLONE
);
325 /* Block all signals while here. This avoids knowing about
326 LinuxThread's signals. */
327 sigfillset (&block_mask
);
328 sigprocmask (SIG_BLOCK
, &block_mask
, &org_mask
);
330 /* ... except during the sigsuspend below. */
331 sigemptyset (&wake_mask
);
335 /* Since all signals are blocked, there's no need to check
337 ret
= waitpid (pid
, status
, flags
);
340 if (ret
== -1 && out_errno
!= ECHILD
)
345 if (flags
& __WCLONE
)
347 /* We've tried both flavors now. If WNOHANG is set,
348 there's nothing else to do, just bail out. */
353 fprintf (stderr
, "blocking\n");
355 /* Block waiting for signals. */
356 sigsuspend (&wake_mask
);
362 sigprocmask (SIG_SETMASK
, &org_mask
, NULL
);
367 ret
= waitpid (pid
, status
, flags
);
368 while (ret
== -1 && errno
== EINTR
);
373 fprintf (stderr
, "my_waitpid (%d, 0x%x): status(%x), %d\n",
374 pid
, flags
, status
? *status
: -1, ret
);
380 /* Handle a GNU/Linux extended wait response. If we see a clone
381 event, we need to add the new LWP to our list (and not report the
382 trap to higher layers). */
385 handle_extended_wait (struct lwp_info
*event_child
, int wstat
)
387 int event
= wstat
>> 16;
388 struct lwp_info
*new_lwp
;
390 if (event
== PTRACE_EVENT_CLONE
)
393 unsigned long new_pid
;
394 int ret
, status
= W_STOPCODE (SIGSTOP
);
396 ptrace (PTRACE_GETEVENTMSG
, lwpid_of (event_child
), 0, &new_pid
);
398 /* If we haven't already seen the new PID stop, wait for it now. */
399 if (! pull_pid_from_list (&stopped_pids
, new_pid
))
401 /* The new child has a pending SIGSTOP. We can't affect it until it
402 hits the SIGSTOP, but we're already attached. */
404 ret
= my_waitpid (new_pid
, &status
, __WALL
);
407 perror_with_name ("waiting for new child");
408 else if (ret
!= new_pid
)
409 warning ("wait returned unexpected PID %d", ret
);
410 else if (!WIFSTOPPED (status
))
411 warning ("wait returned unexpected status 0x%x", status
);
414 linux_enable_event_reporting (new_pid
);
416 ptid
= ptid_build (pid_of (event_child
), new_pid
, 0);
417 new_lwp
= (struct lwp_info
*) add_lwp (ptid
);
418 add_thread (ptid
, new_lwp
);
420 /* Either we're going to immediately resume the new thread
421 or leave it stopped. linux_resume_one_lwp is a nop if it
422 thinks the thread is currently running, so set this first
423 before calling linux_resume_one_lwp. */
424 new_lwp
->stopped
= 1;
426 /* Normally we will get the pending SIGSTOP. But in some cases
427 we might get another signal delivered to the group first.
428 If we do get another signal, be sure not to lose it. */
429 if (WSTOPSIG (status
) == SIGSTOP
)
431 if (stopping_threads
)
432 new_lwp
->stop_pc
= get_stop_pc (new_lwp
);
434 linux_resume_one_lwp (new_lwp
, 0, 0, NULL
);
438 new_lwp
->stop_expected
= 1;
440 if (stopping_threads
)
442 new_lwp
->stop_pc
= get_stop_pc (new_lwp
);
443 new_lwp
->status_pending_p
= 1;
444 new_lwp
->status_pending
= status
;
447 /* Pass the signal on. This is what GDB does - except
448 shouldn't we really report it instead? */
449 linux_resume_one_lwp (new_lwp
, 0, WSTOPSIG (status
), NULL
);
452 /* Always resume the current thread. If we are stopping
453 threads, it will have a pending SIGSTOP; we may as well
455 linux_resume_one_lwp (event_child
, event_child
->stepping
, 0, NULL
);
459 /* Return the PC as read from the regcache of LWP, without any
463 get_pc (struct lwp_info
*lwp
)
465 struct thread_info
*saved_inferior
;
466 struct regcache
*regcache
;
469 if (the_low_target
.get_pc
== NULL
)
472 saved_inferior
= current_inferior
;
473 current_inferior
= get_lwp_thread (lwp
);
475 regcache
= get_thread_regcache (current_inferior
, 1);
476 pc
= (*the_low_target
.get_pc
) (regcache
);
479 fprintf (stderr
, "pc is 0x%lx\n", (long) pc
);
481 current_inferior
= saved_inferior
;
485 /* This function should only be called if LWP got a SIGTRAP.
486 The SIGTRAP could mean several things.
488 On i386, where decr_pc_after_break is non-zero:
489 If we were single-stepping this process using PTRACE_SINGLESTEP,
490 we will get only the one SIGTRAP (even if the instruction we
491 stepped over was a breakpoint). The value of $eip will be the
493 If we continue the process using PTRACE_CONT, we will get a
494 SIGTRAP when we hit a breakpoint. The value of $eip will be
495 the instruction after the breakpoint (i.e. needs to be
496 decremented). If we report the SIGTRAP to GDB, we must also
497 report the undecremented PC. If we cancel the SIGTRAP, we
498 must resume at the decremented PC.
500 (Presumably, not yet tested) On a non-decr_pc_after_break machine
501 with hardware or kernel single-step:
502 If we single-step over a breakpoint instruction, our PC will
503 point at the following instruction. If we continue and hit a
504 breakpoint instruction, our PC will point at the breakpoint
508 get_stop_pc (struct lwp_info
*lwp
)
512 if (the_low_target
.get_pc
== NULL
)
515 stop_pc
= get_pc (lwp
);
517 if (WSTOPSIG (lwp
->last_status
) == SIGTRAP
519 && !lwp
->stopped_by_watchpoint
520 && lwp
->last_status
>> 16 == 0)
521 stop_pc
-= the_low_target
.decr_pc_after_break
;
524 fprintf (stderr
, "stop pc is 0x%lx\n", (long) stop_pc
);
530 add_lwp (ptid_t ptid
)
532 struct lwp_info
*lwp
;
534 lwp
= (struct lwp_info
*) xmalloc (sizeof (*lwp
));
535 memset (lwp
, 0, sizeof (*lwp
));
539 if (the_low_target
.new_thread
!= NULL
)
540 lwp
->arch_private
= the_low_target
.new_thread ();
542 add_inferior_to_list (&all_lwps
, &lwp
->head
);
547 /* Start an inferior process and returns its pid.
548 ALLARGS is a vector of program-name and args. */
551 linux_create_inferior (char *program
, char **allargs
)
553 struct lwp_info
*new_lwp
;
557 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
563 perror_with_name ("fork");
567 ptrace (PTRACE_TRACEME
, 0, 0, 0);
569 #ifdef __SIGRTMIN /* Bionic doesn't use SIGRTMIN the way glibc does. */
570 signal (__SIGRTMIN
+ 1, SIG_DFL
);
575 execv (program
, allargs
);
577 execvp (program
, allargs
);
579 fprintf (stderr
, "Cannot exec %s: %s.\n", program
,
585 linux_add_process (pid
, 0);
587 ptid
= ptid_build (pid
, pid
, 0);
588 new_lwp
= add_lwp (ptid
);
589 add_thread (ptid
, new_lwp
);
590 new_lwp
->must_set_ptrace_flags
= 1;
595 /* Attach to an inferior process. */
598 linux_attach_lwp_1 (unsigned long lwpid
, int initial
)
601 struct lwp_info
*new_lwp
;
603 if (ptrace (PTRACE_ATTACH
, lwpid
, 0, 0) != 0)
607 /* If we fail to attach to an LWP, just warn. */
608 fprintf (stderr
, "Cannot attach to lwp %ld: %s (%d)\n", lwpid
,
609 strerror (errno
), errno
);
614 /* If we fail to attach to a process, report an error. */
615 error ("Cannot attach to lwp %ld: %s (%d)\n", lwpid
,
616 strerror (errno
), errno
);
620 /* NOTE/FIXME: This lwp might have not been the tgid. */
621 ptid
= ptid_build (lwpid
, lwpid
, 0);
624 /* Note that extracting the pid from the current inferior is
625 safe, since we're always called in the context of the same
626 process as this new thread. */
627 int pid
= pid_of (get_thread_lwp (current_inferior
));
628 ptid
= ptid_build (pid
, lwpid
, 0);
631 new_lwp
= (struct lwp_info
*) add_lwp (ptid
);
632 add_thread (ptid
, new_lwp
);
634 /* We need to wait for SIGSTOP before being able to make the next
635 ptrace call on this LWP. */
636 new_lwp
->must_set_ptrace_flags
= 1;
638 /* The next time we wait for this LWP we'll see a SIGSTOP as PTRACE_ATTACH
641 There are several cases to consider here:
643 1) gdbserver has already attached to the process and is being notified
644 of a new thread that is being created.
645 In this case we should ignore that SIGSTOP and resume the
646 process. This is handled below by setting stop_expected = 1,
647 and the fact that add_thread sets last_resume_kind ==
650 2) This is the first thread (the process thread), and we're attaching
651 to it via attach_inferior.
652 In this case we want the process thread to stop.
653 This is handled by having linux_attach set last_resume_kind ==
654 resume_stop after we return.
655 ??? If the process already has several threads we leave the other
658 3) GDB is connecting to gdbserver and is requesting an enumeration of all
660 In this case we want the thread to stop.
661 FIXME: This case is currently not properly handled.
662 We should wait for the SIGSTOP but don't. Things work apparently
663 because enough time passes between when we ptrace (ATTACH) and when
664 gdb makes the next ptrace call on the thread.
666 On the other hand, if we are currently trying to stop all threads, we
667 should treat the new thread as if we had sent it a SIGSTOP. This works
668 because we are guaranteed that the add_lwp call above added us to the
669 end of the list, and so the new thread has not yet reached
670 wait_for_sigstop (but will). */
671 new_lwp
->stop_expected
= 1;
675 linux_attach_lwp (unsigned long lwpid
)
677 linux_attach_lwp_1 (lwpid
, 0);
681 linux_attach (unsigned long pid
)
683 linux_attach_lwp_1 (pid
, 1);
684 linux_add_process (pid
, 1);
688 struct thread_info
*thread
;
690 /* Don't ignore the initial SIGSTOP if we just attached to this
691 process. It will be collected by wait shortly. */
692 thread
= find_thread_ptid (ptid_build (pid
, pid
, 0));
693 thread
->last_resume_kind
= resume_stop
;
706 second_thread_of_pid_p (struct inferior_list_entry
*entry
, void *args
)
708 struct counter
*counter
= args
;
710 if (ptid_get_pid (entry
->id
) == counter
->pid
)
712 if (++counter
->count
> 1)
720 last_thread_of_process_p (struct thread_info
*thread
)
722 ptid_t ptid
= ((struct inferior_list_entry
*)thread
)->id
;
723 int pid
= ptid_get_pid (ptid
);
724 struct counter counter
= { pid
, 0 };
726 return (find_inferior (&all_threads
,
727 second_thread_of_pid_p
, &counter
) == NULL
);
730 /* Kill the inferior lwp. */
733 linux_kill_one_lwp (struct inferior_list_entry
*entry
, void *args
)
735 struct thread_info
*thread
= (struct thread_info
*) entry
;
736 struct lwp_info
*lwp
= get_thread_lwp (thread
);
738 int pid
= * (int *) args
;
740 if (ptid_get_pid (entry
->id
) != pid
)
743 /* We avoid killing the first thread here, because of a Linux kernel (at
744 least 2.6.0-test7 through 2.6.8-rc4) bug; if we kill the parent before
745 the children get a chance to be reaped, it will remain a zombie
748 if (lwpid_of (lwp
) == pid
)
751 fprintf (stderr
, "lkop: is last of process %s\n",
752 target_pid_to_str (entry
->id
));
758 ptrace (PTRACE_KILL
, lwpid_of (lwp
), 0, 0);
760 /* Make sure it died. The loop is most likely unnecessary. */
761 pid
= linux_wait_for_event (lwp
->head
.id
, &wstat
, __WALL
);
762 } while (pid
> 0 && WIFSTOPPED (wstat
));
770 struct process_info
*process
;
771 struct lwp_info
*lwp
;
772 struct thread_info
*thread
;
776 process
= find_process_pid (pid
);
780 /* If we're killing a running inferior, make sure it is stopped
781 first, as PTRACE_KILL will not work otherwise. */
782 stop_all_lwps (0, NULL
);
784 find_inferior (&all_threads
, linux_kill_one_lwp
, &pid
);
786 /* See the comment in linux_kill_one_lwp. We did not kill the first
787 thread in the list, so do so now. */
788 lwp
= find_lwp_pid (pid_to_ptid (pid
));
789 thread
= get_lwp_thread (lwp
);
792 fprintf (stderr
, "lk_1: killing lwp %ld, for pid: %d\n",
793 lwpid_of (lwp
), pid
);
797 ptrace (PTRACE_KILL
, lwpid_of (lwp
), 0, 0);
799 /* Make sure it died. The loop is most likely unnecessary. */
800 lwpid
= linux_wait_for_event (lwp
->head
.id
, &wstat
, __WALL
);
801 } while (lwpid
> 0 && WIFSTOPPED (wstat
));
803 the_target
->mourn (process
);
805 /* Since we presently can only stop all lwps of all processes, we
806 need to unstop lwps of other processes. */
807 unstop_all_lwps (0, NULL
);
812 linux_detach_one_lwp (struct inferior_list_entry
*entry
, void *args
)
814 struct thread_info
*thread
= (struct thread_info
*) entry
;
815 struct lwp_info
*lwp
= get_thread_lwp (thread
);
816 int pid
= * (int *) args
;
818 if (ptid_get_pid (entry
->id
) != pid
)
821 /* If this process is stopped but is expecting a SIGSTOP, then make
822 sure we take care of that now. This isn't absolutely guaranteed
823 to collect the SIGSTOP, but is fairly likely to. */
824 if (lwp
->stop_expected
)
827 /* Clear stop_expected, so that the SIGSTOP will be reported. */
828 lwp
->stop_expected
= 0;
829 linux_resume_one_lwp (lwp
, 0, 0, NULL
);
830 linux_wait_for_event (lwp
->head
.id
, &wstat
, __WALL
);
833 /* Flush any pending changes to the process's registers. */
834 regcache_invalidate_one ((struct inferior_list_entry
*)
835 get_lwp_thread (lwp
));
837 /* Finally, let it resume. */
838 ptrace (PTRACE_DETACH
, lwpid_of (lwp
), 0, 0);
845 linux_detach (int pid
)
847 struct process_info
*process
;
849 process
= find_process_pid (pid
);
853 /* Stop all threads before detaching. First, ptrace requires that
854 the thread is stopped to sucessfully detach. Second, thread_db
855 may need to uninstall thread event breakpoints from memory, which
856 only works with a stopped process anyway. */
857 stop_all_lwps (0, NULL
);
860 thread_db_detach (process
);
863 /* Stabilize threads (move out of jump pads). */
864 stabilize_threads ();
866 find_inferior (&all_threads
, linux_detach_one_lwp
, &pid
);
868 the_target
->mourn (process
);
870 /* Since we presently can only stop all lwps of all processes, we
871 need to unstop lwps of other processes. */
872 unstop_all_lwps (0, NULL
);
876 /* Remove all LWPs that belong to process PROC from the lwp list. */
879 delete_lwp_callback (struct inferior_list_entry
*entry
, void *proc
)
881 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
882 struct process_info
*process
= proc
;
884 if (pid_of (lwp
) == pid_of (process
))
891 linux_mourn (struct process_info
*process
)
893 struct process_info_private
*priv
;
896 thread_db_mourn (process
);
899 find_inferior (&all_lwps
, delete_lwp_callback
, process
);
901 /* Freeing all private data. */
902 priv
= process
->private;
903 free (priv
->arch_private
);
905 process
->private = NULL
;
907 remove_process (process
);
914 struct process_info
*process
;
916 process
= find_process_pid (pid
);
921 ret
= my_waitpid (pid
, &status
, 0);
922 if (WIFEXITED (status
) || WIFSIGNALED (status
))
924 } while (ret
!= -1 || errno
!= ECHILD
);
927 /* Return nonzero if the given thread is still alive. */
929 linux_thread_alive (ptid_t ptid
)
931 struct lwp_info
*lwp
= find_lwp_pid (ptid
);
933 /* We assume we always know if a thread exits. If a whole process
934 exited but we still haven't been able to report it to GDB, we'll
935 hold on to the last lwp of the dead process. */
942 /* Return 1 if this lwp has an interesting status pending. */
944 status_pending_p_callback (struct inferior_list_entry
*entry
, void *arg
)
946 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
947 ptid_t ptid
= * (ptid_t
*) arg
;
948 struct thread_info
*thread
;
950 /* Check if we're only interested in events from a specific process
952 if (!ptid_equal (minus_one_ptid
, ptid
)
953 && ptid_get_pid (ptid
) != ptid_get_pid (lwp
->head
.id
))
956 thread
= get_lwp_thread (lwp
);
958 /* If we got a `vCont;t', but we haven't reported a stop yet, do
959 report any status pending the LWP may have. */
960 if (thread
->last_resume_kind
== resume_stop
961 && thread
->last_status
.kind
!= TARGET_WAITKIND_IGNORE
)
964 return lwp
->status_pending_p
;
968 same_lwp (struct inferior_list_entry
*entry
, void *data
)
970 ptid_t ptid
= *(ptid_t
*) data
;
973 if (ptid_get_lwp (ptid
) != 0)
974 lwp
= ptid_get_lwp (ptid
);
976 lwp
= ptid_get_pid (ptid
);
978 if (ptid_get_lwp (entry
->id
) == lwp
)
985 find_lwp_pid (ptid_t ptid
)
987 return (struct lwp_info
*) find_inferior (&all_lwps
, same_lwp
, &ptid
);
990 static struct lwp_info
*
991 linux_wait_for_lwp (ptid_t ptid
, int *wstatp
, int options
)
994 int to_wait_for
= -1;
995 struct lwp_info
*child
= NULL
;
998 fprintf (stderr
, "linux_wait_for_lwp: %s\n", target_pid_to_str (ptid
));
1000 if (ptid_equal (ptid
, minus_one_ptid
))
1001 to_wait_for
= -1; /* any child */
1003 to_wait_for
= ptid_get_lwp (ptid
); /* this lwp only */
1009 ret
= my_waitpid (to_wait_for
, wstatp
, options
);
1010 if (ret
== 0 || (ret
== -1 && errno
== ECHILD
&& (options
& WNOHANG
)))
1013 perror_with_name ("waitpid");
1016 && (!WIFSTOPPED (*wstatp
)
1017 || (WSTOPSIG (*wstatp
) != 32
1018 && WSTOPSIG (*wstatp
) != 33)))
1019 fprintf (stderr
, "Got an event from %d (%x)\n", ret
, *wstatp
);
1021 child
= find_lwp_pid (pid_to_ptid (ret
));
1023 /* If we didn't find a process, one of two things presumably happened:
1024 - A process we started and then detached from has exited. Ignore it.
1025 - A process we are controlling has forked and the new child's stop
1026 was reported to us by the kernel. Save its PID. */
1027 if (child
== NULL
&& WIFSTOPPED (*wstatp
))
1029 add_pid_to_list (&stopped_pids
, ret
);
1032 else if (child
== NULL
)
1037 child
->last_status
= *wstatp
;
1039 /* Architecture-specific setup after inferior is running.
1040 This needs to happen after we have attached to the inferior
1041 and it is stopped for the first time, but before we access
1042 any inferior registers. */
1045 the_low_target
.arch_setup ();
1046 #ifdef HAVE_LINUX_REGSETS
1047 memset (disabled_regsets
, 0, num_regsets
);
1052 /* Fetch the possibly triggered data watchpoint info and store it in
1055 On some archs, like x86, that use debug registers to set
1056 watchpoints, it's possible that the way to know which watched
1057 address trapped, is to check the register that is used to select
1058 which address to watch. Problem is, between setting the
1059 watchpoint and reading back which data address trapped, the user
1060 may change the set of watchpoints, and, as a consequence, GDB
1061 changes the debug registers in the inferior. To avoid reading
1062 back a stale stopped-data-address when that happens, we cache in
1063 LP the fact that a watchpoint trapped, and the corresponding data
1064 address, as soon as we see CHILD stop with a SIGTRAP. If GDB
1065 changes the debug registers meanwhile, we have the cached data we
1068 if (WIFSTOPPED (*wstatp
) && WSTOPSIG (*wstatp
) == SIGTRAP
)
1070 if (the_low_target
.stopped_by_watchpoint
== NULL
)
1072 child
->stopped_by_watchpoint
= 0;
1076 struct thread_info
*saved_inferior
;
1078 saved_inferior
= current_inferior
;
1079 current_inferior
= get_lwp_thread (child
);
1081 child
->stopped_by_watchpoint
1082 = the_low_target
.stopped_by_watchpoint ();
1084 if (child
->stopped_by_watchpoint
)
1086 if (the_low_target
.stopped_data_address
!= NULL
)
1087 child
->stopped_data_address
1088 = the_low_target
.stopped_data_address ();
1090 child
->stopped_data_address
= 0;
1093 current_inferior
= saved_inferior
;
1097 /* Store the STOP_PC, with adjustment applied. This depends on the
1098 architecture being defined already (so that CHILD has a valid
1099 regcache), and on LAST_STATUS being set (to check for SIGTRAP or
1101 if (WIFSTOPPED (*wstatp
))
1102 child
->stop_pc
= get_stop_pc (child
);
1105 && WIFSTOPPED (*wstatp
)
1106 && the_low_target
.get_pc
!= NULL
)
1108 struct thread_info
*saved_inferior
= current_inferior
;
1109 struct regcache
*regcache
;
1112 current_inferior
= get_lwp_thread (child
);
1113 regcache
= get_thread_regcache (current_inferior
, 1);
1114 pc
= (*the_low_target
.get_pc
) (regcache
);
1115 fprintf (stderr
, "linux_wait_for_lwp: pc is 0x%lx\n", (long) pc
);
1116 current_inferior
= saved_inferior
;
1122 /* This function should only be called if the LWP got a SIGTRAP.
1124 Handle any tracepoint steps or hits. Return true if a tracepoint
1125 event was handled, 0 otherwise. */
1128 handle_tracepoints (struct lwp_info
*lwp
)
1130 struct thread_info
*tinfo
= get_lwp_thread (lwp
);
1131 int tpoint_related_event
= 0;
1133 /* If this tracepoint hit causes a tracing stop, we'll immediately
1134 uninsert tracepoints. To do this, we temporarily pause all
1135 threads, unpatch away, and then unpause threads. We need to make
1136 sure the unpausing doesn't resume LWP too. */
1139 /* And we need to be sure that any all-threads-stopping doesn't try
1140 to move threads out of the jump pads, as it could deadlock the
1141 inferior (LWP could be in the jump pad, maybe even holding the
1144 /* Do any necessary step collect actions. */
1145 tpoint_related_event
|= tracepoint_finished_step (tinfo
, lwp
->stop_pc
);
1147 tpoint_related_event
|= handle_tracepoint_bkpts (tinfo
, lwp
->stop_pc
);
1149 /* See if we just hit a tracepoint and do its main collect
1151 tpoint_related_event
|= tracepoint_was_hit (tinfo
, lwp
->stop_pc
);
1155 gdb_assert (lwp
->suspended
== 0);
1156 gdb_assert (!stabilizing_threads
|| lwp
->collecting_fast_tracepoint
);
1158 if (tpoint_related_event
)
1161 fprintf (stderr
, "got a tracepoint event\n");
1168 /* Convenience wrapper. Returns true if LWP is presently collecting a
1172 linux_fast_tracepoint_collecting (struct lwp_info
*lwp
,
1173 struct fast_tpoint_collect_status
*status
)
1175 CORE_ADDR thread_area
;
1177 if (the_low_target
.get_thread_area
== NULL
)
1180 /* Get the thread area address. This is used to recognize which
1181 thread is which when tracing with the in-process agent library.
1182 We don't read anything from the address, and treat it as opaque;
1183 it's the address itself that we assume is unique per-thread. */
1184 if ((*the_low_target
.get_thread_area
) (lwpid_of (lwp
), &thread_area
) == -1)
1187 return fast_tracepoint_collecting (thread_area
, lwp
->stop_pc
, status
);
1190 /* The reason we resume in the caller, is because we want to be able
1191 to pass lwp->status_pending as WSTAT, and we need to clear
1192 status_pending_p before resuming, otherwise, linux_resume_one_lwp
1193 refuses to resume. */
1196 maybe_move_out_of_jump_pad (struct lwp_info
*lwp
, int *wstat
)
1198 struct thread_info
*saved_inferior
;
1200 saved_inferior
= current_inferior
;
1201 current_inferior
= get_lwp_thread (lwp
);
1204 || (WIFSTOPPED (*wstat
) && WSTOPSIG (*wstat
) != SIGTRAP
))
1205 && supports_fast_tracepoints ()
1206 && in_process_agent_loaded ())
1208 struct fast_tpoint_collect_status status
;
1213 Checking whether LWP %ld needs to move out of the jump pad.\n",
1216 r
= linux_fast_tracepoint_collecting (lwp
, &status
);
1219 || (WSTOPSIG (*wstat
) != SIGILL
1220 && WSTOPSIG (*wstat
) != SIGFPE
1221 && WSTOPSIG (*wstat
) != SIGSEGV
1222 && WSTOPSIG (*wstat
) != SIGBUS
))
1224 lwp
->collecting_fast_tracepoint
= r
;
1228 if (r
== 1 && lwp
->exit_jump_pad_bkpt
== NULL
)
1230 /* Haven't executed the original instruction yet.
1231 Set breakpoint there, and wait till it's hit,
1232 then single-step until exiting the jump pad. */
1233 lwp
->exit_jump_pad_bkpt
1234 = set_breakpoint_at (status
.adjusted_insn_addr
, NULL
);
1239 Checking whether LWP %ld needs to move out of the jump pad...it does\n",
1247 /* If we get a synchronous signal while collecting, *and*
1248 while executing the (relocated) original instruction,
1249 reset the PC to point at the tpoint address, before
1250 reporting to GDB. Otherwise, it's an IPA lib bug: just
1251 report the signal to GDB, and pray for the best. */
1253 lwp
->collecting_fast_tracepoint
= 0;
1256 && (status
.adjusted_insn_addr
<= lwp
->stop_pc
1257 && lwp
->stop_pc
< status
.adjusted_insn_addr_end
))
1260 struct regcache
*regcache
;
1262 /* The si_addr on a few signals references the address
1263 of the faulting instruction. Adjust that as
1265 if ((WSTOPSIG (*wstat
) == SIGILL
1266 || WSTOPSIG (*wstat
) == SIGFPE
1267 || WSTOPSIG (*wstat
) == SIGBUS
1268 || WSTOPSIG (*wstat
) == SIGSEGV
)
1269 && ptrace (PTRACE_GETSIGINFO
, lwpid_of (lwp
), 0, &info
) == 0
1270 /* Final check just to make sure we don't clobber
1271 the siginfo of non-kernel-sent signals. */
1272 && (uintptr_t) info
.si_addr
== lwp
->stop_pc
)
1274 info
.si_addr
= (void *) (uintptr_t) status
.tpoint_addr
;
1275 ptrace (PTRACE_SETSIGINFO
, lwpid_of (lwp
), 0, &info
);
1278 regcache
= get_thread_regcache (get_lwp_thread (lwp
), 1);
1279 (*the_low_target
.set_pc
) (regcache
, status
.tpoint_addr
);
1280 lwp
->stop_pc
= status
.tpoint_addr
;
1282 /* Cancel any fast tracepoint lock this thread was
1284 force_unlock_trace_buffer ();
1287 if (lwp
->exit_jump_pad_bkpt
!= NULL
)
1291 "Cancelling fast exit-jump-pad: removing bkpt. "
1292 "stopping all threads momentarily.\n");
1294 stop_all_lwps (1, lwp
);
1295 cancel_breakpoints ();
1297 delete_breakpoint (lwp
->exit_jump_pad_bkpt
);
1298 lwp
->exit_jump_pad_bkpt
= NULL
;
1300 unstop_all_lwps (1, lwp
);
1302 gdb_assert (lwp
->suspended
>= 0);
1309 Checking whether LWP %ld needs to move out of the jump pad...no\n",
1314 /* Enqueue one signal in the "signals to report later when out of the
1318 enqueue_one_deferred_signal (struct lwp_info
*lwp
, int *wstat
)
1320 struct pending_signals
*p_sig
;
1324 Deferring signal %d for LWP %ld.\n", WSTOPSIG (*wstat
), lwpid_of (lwp
));
1328 struct pending_signals
*sig
;
1330 for (sig
= lwp
->pending_signals_to_report
;
1334 " Already queued %d\n",
1337 fprintf (stderr
, " (no more currently queued signals)\n");
1340 p_sig
= xmalloc (sizeof (*p_sig
));
1341 p_sig
->prev
= lwp
->pending_signals_to_report
;
1342 p_sig
->signal
= WSTOPSIG (*wstat
);
1343 memset (&p_sig
->info
, 0, sizeof (siginfo_t
));
1344 ptrace (PTRACE_GETSIGINFO
, lwpid_of (lwp
), 0, &p_sig
->info
);
1346 lwp
->pending_signals_to_report
= p_sig
;
1349 /* Dequeue one signal from the "signals to report later when out of
1350 the jump pad" list. */
1353 dequeue_one_deferred_signal (struct lwp_info
*lwp
, int *wstat
)
1355 if (lwp
->pending_signals_to_report
!= NULL
)
1357 struct pending_signals
**p_sig
;
1359 p_sig
= &lwp
->pending_signals_to_report
;
1360 while ((*p_sig
)->prev
!= NULL
)
1361 p_sig
= &(*p_sig
)->prev
;
1363 *wstat
= W_STOPCODE ((*p_sig
)->signal
);
1364 if ((*p_sig
)->info
.si_signo
!= 0)
1365 ptrace (PTRACE_SETSIGINFO
, lwpid_of (lwp
), 0, &(*p_sig
)->info
);
1370 fprintf (stderr
, "Reporting deferred signal %d for LWP %ld.\n",
1371 WSTOPSIG (*wstat
), lwpid_of (lwp
));
1375 struct pending_signals
*sig
;
1377 for (sig
= lwp
->pending_signals_to_report
;
1381 " Still queued %d\n",
1384 fprintf (stderr
, " (no more queued signals)\n");
1393 /* Arrange for a breakpoint to be hit again later. We don't keep the
1394 SIGTRAP status and don't forward the SIGTRAP signal to the LWP. We
1395 will handle the current event, eventually we will resume this LWP,
1396 and this breakpoint will trap again. */
1399 cancel_breakpoint (struct lwp_info
*lwp
)
1401 struct thread_info
*saved_inferior
;
1403 /* There's nothing to do if we don't support breakpoints. */
1404 if (!supports_breakpoints ())
1407 /* breakpoint_at reads from current inferior. */
1408 saved_inferior
= current_inferior
;
1409 current_inferior
= get_lwp_thread (lwp
);
1411 if ((*the_low_target
.breakpoint_at
) (lwp
->stop_pc
))
1415 "CB: Push back breakpoint for %s\n",
1416 target_pid_to_str (ptid_of (lwp
)));
1418 /* Back up the PC if necessary. */
1419 if (the_low_target
.decr_pc_after_break
)
1421 struct regcache
*regcache
1422 = get_thread_regcache (current_inferior
, 1);
1423 (*the_low_target
.set_pc
) (regcache
, lwp
->stop_pc
);
1426 current_inferior
= saved_inferior
;
1433 "CB: No breakpoint found at %s for [%s]\n",
1434 paddress (lwp
->stop_pc
),
1435 target_pid_to_str (ptid_of (lwp
)));
1438 current_inferior
= saved_inferior
;
1442 /* When the event-loop is doing a step-over, this points at the thread
1444 ptid_t step_over_bkpt
;
1446 /* Wait for an event from child PID. If PID is -1, wait for any
1447 child. Store the stop status through the status pointer WSTAT.
1448 OPTIONS is passed to the waitpid call. Return 0 if no child stop
1449 event was found and OPTIONS contains WNOHANG. Return the PID of
1450 the stopped child otherwise. */
1453 linux_wait_for_event_1 (ptid_t ptid
, int *wstat
, int options
)
1455 struct lwp_info
*event_child
, *requested_child
;
1458 requested_child
= NULL
;
1460 /* Check for a lwp with a pending status. */
1462 if (ptid_equal (ptid
, minus_one_ptid
)
1463 || ptid_equal (pid_to_ptid (ptid_get_pid (ptid
)), ptid
))
1465 event_child
= (struct lwp_info
*)
1466 find_inferior (&all_lwps
, status_pending_p_callback
, &ptid
);
1467 if (debug_threads
&& event_child
)
1468 fprintf (stderr
, "Got a pending child %ld\n", lwpid_of (event_child
));
1472 requested_child
= find_lwp_pid (ptid
);
1474 if (!stopping_threads
1475 && requested_child
->status_pending_p
1476 && requested_child
->collecting_fast_tracepoint
)
1478 enqueue_one_deferred_signal (requested_child
,
1479 &requested_child
->status_pending
);
1480 requested_child
->status_pending_p
= 0;
1481 requested_child
->status_pending
= 0;
1482 linux_resume_one_lwp (requested_child
, 0, 0, NULL
);
1485 if (requested_child
->suspended
1486 && requested_child
->status_pending_p
)
1487 fatal ("requesting an event out of a suspended child?");
1489 if (requested_child
->status_pending_p
)
1490 event_child
= requested_child
;
1493 if (event_child
!= NULL
)
1496 fprintf (stderr
, "Got an event from pending child %ld (%04x)\n",
1497 lwpid_of (event_child
), event_child
->status_pending
);
1498 *wstat
= event_child
->status_pending
;
1499 event_child
->status_pending_p
= 0;
1500 event_child
->status_pending
= 0;
1501 current_inferior
= get_lwp_thread (event_child
);
1502 return lwpid_of (event_child
);
1505 /* We only enter this loop if no process has a pending wait status. Thus
1506 any action taken in response to a wait status inside this loop is
1507 responding as soon as we detect the status, not after any pending
1511 event_child
= linux_wait_for_lwp (ptid
, wstat
, options
);
1513 if ((options
& WNOHANG
) && event_child
== NULL
)
1516 fprintf (stderr
, "WNOHANG set, no event found\n");
1520 if (event_child
== NULL
)
1521 error ("event from unknown child");
1523 current_inferior
= get_lwp_thread (event_child
);
1525 /* Check for thread exit. */
1526 if (! WIFSTOPPED (*wstat
))
1529 fprintf (stderr
, "LWP %ld exiting\n", lwpid_of (event_child
));
1531 /* If the last thread is exiting, just return. */
1532 if (last_thread_of_process_p (current_inferior
))
1535 fprintf (stderr
, "LWP %ld is last lwp of process\n",
1536 lwpid_of (event_child
));
1537 return lwpid_of (event_child
);
1542 current_inferior
= (struct thread_info
*) all_threads
.head
;
1544 fprintf (stderr
, "Current inferior is now %ld\n",
1545 lwpid_of (get_thread_lwp (current_inferior
)));
1549 current_inferior
= NULL
;
1551 fprintf (stderr
, "Current inferior is now <NULL>\n");
1554 /* If we were waiting for this particular child to do something...
1555 well, it did something. */
1556 if (requested_child
!= NULL
)
1558 int lwpid
= lwpid_of (event_child
);
1560 /* Cancel the step-over operation --- the thread that
1561 started it is gone. */
1562 if (finish_step_over (event_child
))
1563 unstop_all_lwps (1, event_child
);
1564 delete_lwp (event_child
);
1568 delete_lwp (event_child
);
1570 /* Wait for a more interesting event. */
1574 if (event_child
->must_set_ptrace_flags
)
1576 linux_enable_event_reporting (lwpid_of (event_child
));
1577 event_child
->must_set_ptrace_flags
= 0;
1580 if (WIFSTOPPED (*wstat
) && WSTOPSIG (*wstat
) == SIGTRAP
1581 && *wstat
>> 16 != 0)
1583 handle_extended_wait (event_child
, *wstat
);
1587 if (WIFSTOPPED (*wstat
)
1588 && WSTOPSIG (*wstat
) == SIGSTOP
1589 && event_child
->stop_expected
)
1594 fprintf (stderr
, "Expected stop.\n");
1595 event_child
->stop_expected
= 0;
1597 should_stop
= (current_inferior
->last_resume_kind
== resume_stop
1598 || stopping_threads
);
1602 linux_resume_one_lwp (event_child
,
1603 event_child
->stepping
, 0, NULL
);
1608 return lwpid_of (event_child
);
1616 linux_wait_for_event (ptid_t ptid
, int *wstat
, int options
)
1620 if (ptid_is_pid (ptid
))
1622 /* A request to wait for a specific tgid. This is not possible
1623 with waitpid, so instead, we wait for any child, and leave
1624 children we're not interested in right now with a pending
1625 status to report later. */
1626 wait_ptid
= minus_one_ptid
;
1635 event_pid
= linux_wait_for_event_1 (wait_ptid
, wstat
, options
);
1638 && ptid_is_pid (ptid
) && ptid_get_pid (ptid
) != event_pid
)
1640 struct lwp_info
*event_child
= find_lwp_pid (pid_to_ptid (event_pid
));
1642 if (! WIFSTOPPED (*wstat
))
1643 mark_lwp_dead (event_child
, *wstat
);
1646 event_child
->status_pending_p
= 1;
1647 event_child
->status_pending
= *wstat
;
1656 /* Count the LWP's that have had events. */
1659 count_events_callback (struct inferior_list_entry
*entry
, void *data
)
1661 struct lwp_info
*lp
= (struct lwp_info
*) entry
;
1662 struct thread_info
*thread
= get_lwp_thread (lp
);
1665 gdb_assert (count
!= NULL
);
1667 /* Count only resumed LWPs that have a SIGTRAP event pending that
1668 should be reported to GDB. */
1669 if (thread
->last_status
.kind
== TARGET_WAITKIND_IGNORE
1670 && thread
->last_resume_kind
!= resume_stop
1671 && lp
->status_pending_p
1672 && WIFSTOPPED (lp
->status_pending
)
1673 && WSTOPSIG (lp
->status_pending
) == SIGTRAP
1674 && !breakpoint_inserted_here (lp
->stop_pc
))
1680 /* Select the LWP (if any) that is currently being single-stepped. */
1683 select_singlestep_lwp_callback (struct inferior_list_entry
*entry
, void *data
)
1685 struct lwp_info
*lp
= (struct lwp_info
*) entry
;
1686 struct thread_info
*thread
= get_lwp_thread (lp
);
1688 if (thread
->last_status
.kind
== TARGET_WAITKIND_IGNORE
1689 && thread
->last_resume_kind
== resume_step
1690 && lp
->status_pending_p
)
1696 /* Select the Nth LWP that has had a SIGTRAP event that should be
1700 select_event_lwp_callback (struct inferior_list_entry
*entry
, void *data
)
1702 struct lwp_info
*lp
= (struct lwp_info
*) entry
;
1703 struct thread_info
*thread
= get_lwp_thread (lp
);
1704 int *selector
= data
;
1706 gdb_assert (selector
!= NULL
);
1708 /* Select only resumed LWPs that have a SIGTRAP event pending. */
1709 if (thread
->last_resume_kind
!= resume_stop
1710 && thread
->last_status
.kind
== TARGET_WAITKIND_IGNORE
1711 && lp
->status_pending_p
1712 && WIFSTOPPED (lp
->status_pending
)
1713 && WSTOPSIG (lp
->status_pending
) == SIGTRAP
1714 && !breakpoint_inserted_here (lp
->stop_pc
))
1715 if ((*selector
)-- == 0)
1722 cancel_breakpoints_callback (struct inferior_list_entry
*entry
, void *data
)
1724 struct lwp_info
*lp
= (struct lwp_info
*) entry
;
1725 struct thread_info
*thread
= get_lwp_thread (lp
);
1726 struct lwp_info
*event_lp
= data
;
1728 /* Leave the LWP that has been elected to receive a SIGTRAP alone. */
1732 /* If a LWP other than the LWP that we're reporting an event for has
1733 hit a GDB breakpoint (as opposed to some random trap signal),
1734 then just arrange for it to hit it again later. We don't keep
1735 the SIGTRAP status and don't forward the SIGTRAP signal to the
1736 LWP. We will handle the current event, eventually we will resume
1737 all LWPs, and this one will get its breakpoint trap again.
1739 If we do not do this, then we run the risk that the user will
1740 delete or disable the breakpoint, but the LWP will have already
1743 if (thread
->last_resume_kind
!= resume_stop
1744 && thread
->last_status
.kind
== TARGET_WAITKIND_IGNORE
1745 && lp
->status_pending_p
1746 && WIFSTOPPED (lp
->status_pending
)
1747 && WSTOPSIG (lp
->status_pending
) == SIGTRAP
1749 && !lp
->stopped_by_watchpoint
1750 && cancel_breakpoint (lp
))
1751 /* Throw away the SIGTRAP. */
1752 lp
->status_pending_p
= 0;
1758 linux_cancel_breakpoints (void)
1760 find_inferior (&all_lwps
, cancel_breakpoints_callback
, NULL
);
1763 /* Select one LWP out of those that have events pending. */
1766 select_event_lwp (struct lwp_info
**orig_lp
)
1769 int random_selector
;
1770 struct lwp_info
*event_lp
;
1772 /* Give preference to any LWP that is being single-stepped. */
1774 = (struct lwp_info
*) find_inferior (&all_lwps
,
1775 select_singlestep_lwp_callback
, NULL
);
1776 if (event_lp
!= NULL
)
1780 "SEL: Select single-step %s\n",
1781 target_pid_to_str (ptid_of (event_lp
)));
1785 /* No single-stepping LWP. Select one at random, out of those
1786 which have had SIGTRAP events. */
1788 /* First see how many SIGTRAP events we have. */
1789 find_inferior (&all_lwps
, count_events_callback
, &num_events
);
1791 /* Now randomly pick a LWP out of those that have had a SIGTRAP. */
1792 random_selector
= (int)
1793 ((num_events
* (double) rand ()) / (RAND_MAX
+ 1.0));
1795 if (debug_threads
&& num_events
> 1)
1797 "SEL: Found %d SIGTRAP events, selecting #%d\n",
1798 num_events
, random_selector
);
1800 event_lp
= (struct lwp_info
*) find_inferior (&all_lwps
,
1801 select_event_lwp_callback
,
1805 if (event_lp
!= NULL
)
1807 /* Switch the event LWP. */
1808 *orig_lp
= event_lp
;
1812 /* Decrement the suspend count of an LWP. */
1815 unsuspend_one_lwp (struct inferior_list_entry
*entry
, void *except
)
1817 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
1819 /* Ignore EXCEPT. */
1825 gdb_assert (lwp
->suspended
>= 0);
1829 /* Decrement the suspend count of all LWPs, except EXCEPT, if non
1833 unsuspend_all_lwps (struct lwp_info
*except
)
1835 find_inferior (&all_lwps
, unsuspend_one_lwp
, except
);
1838 static void move_out_of_jump_pad_callback (struct inferior_list_entry
*entry
);
1839 static int stuck_in_jump_pad_callback (struct inferior_list_entry
*entry
,
1841 static int lwp_running (struct inferior_list_entry
*entry
, void *data
);
1842 static ptid_t
linux_wait_1 (ptid_t ptid
,
1843 struct target_waitstatus
*ourstatus
,
1844 int target_options
);
1846 /* Stabilize threads (move out of jump pads).
1848 If a thread is midway collecting a fast tracepoint, we need to
1849 finish the collection and move it out of the jump pad before
1850 reporting the signal.
1852 This avoids recursion while collecting (when a signal arrives
1853 midway, and the signal handler itself collects), which would trash
1854 the trace buffer. In case the user set a breakpoint in a signal
1855 handler, this avoids the backtrace showing the jump pad, etc..
1856 Most importantly, there are certain things we can't do safely if
1857 threads are stopped in a jump pad (or in its callee's). For
1860 - starting a new trace run. A thread still collecting the
1861 previous run, could trash the trace buffer when resumed. The trace
1862 buffer control structures would have been reset but the thread had
1863 no way to tell. The thread could even midway memcpy'ing to the
1864 buffer, which would mean that when resumed, it would clobber the
1865 trace buffer that had been set for a new run.
1867 - we can't rewrite/reuse the jump pads for new tracepoints
1868 safely. Say you do tstart while a thread is stopped midway while
1869 collecting. When the thread is later resumed, it finishes the
1870 collection, and returns to the jump pad, to execute the original
1871 instruction that was under the tracepoint jump at the time the
1872 older run had been started. If the jump pad had been rewritten
1873 since for something else in the new run, the thread would now
1874 execute the wrong / random instructions. */
1877 linux_stabilize_threads (void)
1879 struct thread_info
*save_inferior
;
1880 struct lwp_info
*lwp_stuck
;
1883 = (struct lwp_info
*) find_inferior (&all_lwps
,
1884 stuck_in_jump_pad_callback
, NULL
);
1885 if (lwp_stuck
!= NULL
)
1887 fprintf (stderr
, "can't stabilize, LWP %ld is stuck in jump pad\n",
1888 lwpid_of (lwp_stuck
));
1892 save_inferior
= current_inferior
;
1894 stabilizing_threads
= 1;
1897 for_each_inferior (&all_lwps
, move_out_of_jump_pad_callback
);
1899 /* Loop until all are stopped out of the jump pads. */
1900 while (find_inferior (&all_lwps
, lwp_running
, NULL
) != NULL
)
1902 struct target_waitstatus ourstatus
;
1903 struct lwp_info
*lwp
;
1907 /* Note that we go through the full wait even loop. While
1908 moving threads out of jump pad, we need to be able to step
1909 over internal breakpoints and such. */
1910 ptid
= linux_wait_1 (minus_one_ptid
, &ourstatus
, 0);
1912 if (ourstatus
.kind
== TARGET_WAITKIND_STOPPED
)
1914 lwp
= get_thread_lwp (current_inferior
);
1919 if (ourstatus
.value
.sig
!= TARGET_SIGNAL_0
1920 || current_inferior
->last_resume_kind
== resume_stop
)
1922 wstat
= W_STOPCODE (target_signal_to_host (ourstatus
.value
.sig
));
1923 enqueue_one_deferred_signal (lwp
, &wstat
);
1928 find_inferior (&all_lwps
, unsuspend_one_lwp
, NULL
);
1930 stabilizing_threads
= 0;
1932 current_inferior
= save_inferior
;
1935 = (struct lwp_info
*) find_inferior (&all_lwps
,
1936 stuck_in_jump_pad_callback
, NULL
);
1937 if (lwp_stuck
!= NULL
)
1940 fprintf (stderr
, "couldn't stabilize, LWP %ld got stuck in jump pad\n",
1941 lwpid_of (lwp_stuck
));
1945 /* Wait for process, returns status. */
1948 linux_wait_1 (ptid_t ptid
,
1949 struct target_waitstatus
*ourstatus
, int target_options
)
1952 struct lwp_info
*event_child
;
1955 int step_over_finished
;
1956 int bp_explains_trap
;
1957 int maybe_internal_trap
;
1961 /* Translate generic target options into linux options. */
1963 if (target_options
& TARGET_WNOHANG
)
1967 bp_explains_trap
= 0;
1969 ourstatus
->kind
= TARGET_WAITKIND_IGNORE
;
1971 /* If we were only supposed to resume one thread, only wait for
1972 that thread - if it's still alive. If it died, however - which
1973 can happen if we're coming from the thread death case below -
1974 then we need to make sure we restart the other threads. We could
1975 pick a thread at random or restart all; restarting all is less
1978 && !ptid_equal (cont_thread
, null_ptid
)
1979 && !ptid_equal (cont_thread
, minus_one_ptid
))
1981 struct thread_info
*thread
;
1983 thread
= (struct thread_info
*) find_inferior_id (&all_threads
,
1986 /* No stepping, no signal - unless one is pending already, of course. */
1989 struct thread_resume resume_info
;
1990 resume_info
.thread
= minus_one_ptid
;
1991 resume_info
.kind
= resume_continue
;
1992 resume_info
.sig
= 0;
1993 linux_resume (&resume_info
, 1);
1999 if (ptid_equal (step_over_bkpt
, null_ptid
))
2000 pid
= linux_wait_for_event (ptid
, &w
, options
);
2004 fprintf (stderr
, "step_over_bkpt set [%s], doing a blocking wait\n",
2005 target_pid_to_str (step_over_bkpt
));
2006 pid
= linux_wait_for_event (step_over_bkpt
, &w
, options
& ~WNOHANG
);
2009 if (pid
== 0) /* only if TARGET_WNOHANG */
2012 event_child
= get_thread_lwp (current_inferior
);
2014 /* If we are waiting for a particular child, and it exited,
2015 linux_wait_for_event will return its exit status. Similarly if
2016 the last child exited. If this is not the last child, however,
2017 do not report it as exited until there is a 'thread exited' response
2018 available in the remote protocol. Instead, just wait for another event.
2019 This should be safe, because if the thread crashed we will already
2020 have reported the termination signal to GDB; that should stop any
2021 in-progress stepping operations, etc.
2023 Report the exit status of the last thread to exit. This matches
2024 LinuxThreads' behavior. */
2026 if (last_thread_of_process_p (current_inferior
))
2028 if (WIFEXITED (w
) || WIFSIGNALED (w
))
2032 ourstatus
->kind
= TARGET_WAITKIND_EXITED
;
2033 ourstatus
->value
.integer
= WEXITSTATUS (w
);
2036 fprintf (stderr
, "\nChild exited with retcode = %x \n", WEXITSTATUS (w
));
2040 ourstatus
->kind
= TARGET_WAITKIND_SIGNALLED
;
2041 ourstatus
->value
.sig
= target_signal_from_host (WTERMSIG (w
));
2044 fprintf (stderr
, "\nChild terminated with signal = %x \n", WTERMSIG (w
));
2048 return ptid_of (event_child
);
2053 if (!WIFSTOPPED (w
))
2057 /* If this event was not handled before, and is not a SIGTRAP, we
2058 report it. SIGILL and SIGSEGV are also treated as traps in case
2059 a breakpoint is inserted at the current PC. If this target does
2060 not support internal breakpoints at all, we also report the
2061 SIGTRAP without further processing; it's of no concern to us. */
2063 = (supports_breakpoints ()
2064 && (WSTOPSIG (w
) == SIGTRAP
2065 || ((WSTOPSIG (w
) == SIGILL
2066 || WSTOPSIG (w
) == SIGSEGV
)
2067 && (*the_low_target
.breakpoint_at
) (event_child
->stop_pc
))));
2069 if (maybe_internal_trap
)
2071 /* Handle anything that requires bookkeeping before deciding to
2072 report the event or continue waiting. */
2074 /* First check if we can explain the SIGTRAP with an internal
2075 breakpoint, or if we should possibly report the event to GDB.
2076 Do this before anything that may remove or insert a
2078 bp_explains_trap
= breakpoint_inserted_here (event_child
->stop_pc
);
2080 /* We have a SIGTRAP, possibly a step-over dance has just
2081 finished. If so, tweak the state machine accordingly,
2082 reinsert breakpoints and delete any reinsert (software
2083 single-step) breakpoints. */
2084 step_over_finished
= finish_step_over (event_child
);
2086 /* Now invoke the callbacks of any internal breakpoints there. */
2087 check_breakpoints (event_child
->stop_pc
);
2089 /* Handle tracepoint data collecting. This may overflow the
2090 trace buffer, and cause a tracing stop, removing
2092 trace_event
= handle_tracepoints (event_child
);
2094 if (bp_explains_trap
)
2096 /* If we stepped or ran into an internal breakpoint, we've
2097 already handled it. So next time we resume (from this
2098 PC), we should step over it. */
2100 fprintf (stderr
, "Hit a gdbserver breakpoint.\n");
2102 if (breakpoint_here (event_child
->stop_pc
))
2103 event_child
->need_step_over
= 1;
2108 /* We have some other signal, possibly a step-over dance was in
2109 progress, and it should be cancelled too. */
2110 step_over_finished
= finish_step_over (event_child
);
2113 /* We have all the data we need. Either report the event to GDB, or
2114 resume threads and keep waiting for more. */
2116 /* If we're collecting a fast tracepoint, finish the collection and
2117 move out of the jump pad before delivering a signal. See
2118 linux_stabilize_threads. */
2121 && WSTOPSIG (w
) != SIGTRAP
2122 && supports_fast_tracepoints ()
2123 && in_process_agent_loaded ())
2127 "Got signal %d for LWP %ld. Check if we need "
2128 "to defer or adjust it.\n",
2129 WSTOPSIG (w
), lwpid_of (event_child
));
2131 /* Allow debugging the jump pad itself. */
2132 if (current_inferior
->last_resume_kind
!= resume_step
2133 && maybe_move_out_of_jump_pad (event_child
, &w
))
2135 enqueue_one_deferred_signal (event_child
, &w
);
2139 "Signal %d for LWP %ld deferred (in jump pad)\n",
2140 WSTOPSIG (w
), lwpid_of (event_child
));
2142 linux_resume_one_lwp (event_child
, 0, 0, NULL
);
2147 if (event_child
->collecting_fast_tracepoint
)
2151 LWP %ld was trying to move out of the jump pad (%d). \
2152 Check if we're already there.\n",
2153 lwpid_of (event_child
),
2154 event_child
->collecting_fast_tracepoint
);
2158 event_child
->collecting_fast_tracepoint
2159 = linux_fast_tracepoint_collecting (event_child
, NULL
);
2161 if (event_child
->collecting_fast_tracepoint
!= 1)
2163 /* No longer need this breakpoint. */
2164 if (event_child
->exit_jump_pad_bkpt
!= NULL
)
2168 "No longer need exit-jump-pad bkpt; removing it."
2169 "stopping all threads momentarily.\n");
2171 /* Other running threads could hit this breakpoint.
2172 We don't handle moribund locations like GDB does,
2173 instead we always pause all threads when removing
2174 breakpoints, so that any step-over or
2175 decr_pc_after_break adjustment is always taken
2176 care of while the breakpoint is still
2178 stop_all_lwps (1, event_child
);
2179 cancel_breakpoints ();
2181 delete_breakpoint (event_child
->exit_jump_pad_bkpt
);
2182 event_child
->exit_jump_pad_bkpt
= NULL
;
2184 unstop_all_lwps (1, event_child
);
2186 gdb_assert (event_child
->suspended
>= 0);
2190 if (event_child
->collecting_fast_tracepoint
== 0)
2194 "fast tracepoint finished "
2195 "collecting successfully.\n");
2197 /* We may have a deferred signal to report. */
2198 if (dequeue_one_deferred_signal (event_child
, &w
))
2201 fprintf (stderr
, "dequeued one signal.\n");
2203 else if (debug_threads
)
2205 fprintf (stderr
, "no deferred signals.\n");
2207 if (stabilizing_threads
)
2209 ourstatus
->kind
= TARGET_WAITKIND_STOPPED
;
2210 ourstatus
->value
.sig
= TARGET_SIGNAL_0
;
2211 return ptid_of (event_child
);
2217 /* Check whether GDB would be interested in this event. */
2219 /* If GDB is not interested in this signal, don't stop other
2220 threads, and don't report it to GDB. Just resume the inferior
2221 right away. We do this for threading-related signals as well as
2222 any that GDB specifically requested we ignore. But never ignore
2223 SIGSTOP if we sent it ourselves, and do not ignore signals when
2224 stepping - they may require special handling to skip the signal
2226 /* FIXME drow/2002-06-09: Get signal numbers from the inferior's
2229 && current_inferior
->last_resume_kind
!= resume_step
2231 #if defined (USE_THREAD_DB) && defined (__SIGRTMIN)
2232 (current_process ()->private->thread_db
!= NULL
2233 && (WSTOPSIG (w
) == __SIGRTMIN
2234 || WSTOPSIG (w
) == __SIGRTMIN
+ 1))
2237 (pass_signals
[target_signal_from_host (WSTOPSIG (w
))]
2238 && !(WSTOPSIG (w
) == SIGSTOP
2239 && current_inferior
->last_resume_kind
== resume_stop
))))
2241 siginfo_t info
, *info_p
;
2244 fprintf (stderr
, "Ignored signal %d for LWP %ld.\n",
2245 WSTOPSIG (w
), lwpid_of (event_child
));
2247 if (ptrace (PTRACE_GETSIGINFO
, lwpid_of (event_child
), 0, &info
) == 0)
2251 linux_resume_one_lwp (event_child
, event_child
->stepping
,
2252 WSTOPSIG (w
), info_p
);
2256 /* If GDB wanted this thread to single step, we always want to
2257 report the SIGTRAP, and let GDB handle it. Watchpoints should
2258 always be reported. So should signals we can't explain. A
2259 SIGTRAP we can't explain could be a GDB breakpoint --- we may or
2260 not support Z0 breakpoints. If we do, we're be able to handle
2261 GDB breakpoints on top of internal breakpoints, by handling the
2262 internal breakpoint and still reporting the event to GDB. If we
2263 don't, we're out of luck, GDB won't see the breakpoint hit. */
2264 report_to_gdb
= (!maybe_internal_trap
2265 || current_inferior
->last_resume_kind
== resume_step
2266 || event_child
->stopped_by_watchpoint
2267 || (!step_over_finished
&& !bp_explains_trap
&& !trace_event
)
2268 || gdb_breakpoint_here (event_child
->stop_pc
));
2270 /* We found no reason GDB would want us to stop. We either hit one
2271 of our own breakpoints, or finished an internal step GDB
2272 shouldn't know about. */
2277 if (bp_explains_trap
)
2278 fprintf (stderr
, "Hit a gdbserver breakpoint.\n");
2279 if (step_over_finished
)
2280 fprintf (stderr
, "Step-over finished.\n");
2282 fprintf (stderr
, "Tracepoint event.\n");
2285 /* We're not reporting this breakpoint to GDB, so apply the
2286 decr_pc_after_break adjustment to the inferior's regcache
2289 if (the_low_target
.set_pc
!= NULL
)
2291 struct regcache
*regcache
2292 = get_thread_regcache (get_lwp_thread (event_child
), 1);
2293 (*the_low_target
.set_pc
) (regcache
, event_child
->stop_pc
);
2296 /* We may have finished stepping over a breakpoint. If so,
2297 we've stopped and suspended all LWPs momentarily except the
2298 stepping one. This is where we resume them all again. We're
2299 going to keep waiting, so use proceed, which handles stepping
2300 over the next breakpoint. */
2302 fprintf (stderr
, "proceeding all threads.\n");
2304 if (step_over_finished
)
2305 unsuspend_all_lwps (event_child
);
2307 proceed_all_lwps ();
2313 if (current_inferior
->last_resume_kind
== resume_step
)
2314 fprintf (stderr
, "GDB wanted to single-step, reporting event.\n");
2315 if (event_child
->stopped_by_watchpoint
)
2316 fprintf (stderr
, "Stopped by watchpoint.\n");
2317 if (gdb_breakpoint_here (event_child
->stop_pc
))
2318 fprintf (stderr
, "Stopped by GDB breakpoint.\n");
2320 fprintf (stderr
, "Hit a non-gdbserver trap event.\n");
2323 /* Alright, we're going to report a stop. */
2325 if (!non_stop
&& !stabilizing_threads
)
2327 /* In all-stop, stop all threads. */
2328 stop_all_lwps (0, NULL
);
2330 /* If we're not waiting for a specific LWP, choose an event LWP
2331 from among those that have had events. Giving equal priority
2332 to all LWPs that have had events helps prevent
2334 if (ptid_equal (ptid
, minus_one_ptid
))
2336 event_child
->status_pending_p
= 1;
2337 event_child
->status_pending
= w
;
2339 select_event_lwp (&event_child
);
2341 event_child
->status_pending_p
= 0;
2342 w
= event_child
->status_pending
;
2345 /* Now that we've selected our final event LWP, cancel any
2346 breakpoints in other LWPs that have hit a GDB breakpoint.
2347 See the comment in cancel_breakpoints_callback to find out
2349 find_inferior (&all_lwps
, cancel_breakpoints_callback
, event_child
);
2351 /* Stabilize threads (move out of jump pads). */
2352 stabilize_threads ();
2356 /* If we just finished a step-over, then all threads had been
2357 momentarily paused. In all-stop, that's fine, we want
2358 threads stopped by now anyway. In non-stop, we need to
2359 re-resume threads that GDB wanted to be running. */
2360 if (step_over_finished
)
2361 unstop_all_lwps (1, event_child
);
2364 ourstatus
->kind
= TARGET_WAITKIND_STOPPED
;
2366 if (current_inferior
->last_resume_kind
== resume_stop
2367 && WSTOPSIG (w
) == SIGSTOP
)
2369 /* A thread that has been requested to stop by GDB with vCont;t,
2370 and it stopped cleanly, so report as SIG0. The use of
2371 SIGSTOP is an implementation detail. */
2372 ourstatus
->value
.sig
= TARGET_SIGNAL_0
;
2374 else if (current_inferior
->last_resume_kind
== resume_stop
2375 && WSTOPSIG (w
) != SIGSTOP
)
2377 /* A thread that has been requested to stop by GDB with vCont;t,
2378 but, it stopped for other reasons. */
2379 ourstatus
->value
.sig
= target_signal_from_host (WSTOPSIG (w
));
2383 ourstatus
->value
.sig
= target_signal_from_host (WSTOPSIG (w
));
2386 gdb_assert (ptid_equal (step_over_bkpt
, null_ptid
));
2389 fprintf (stderr
, "linux_wait ret = %s, %d, %d\n",
2390 target_pid_to_str (ptid_of (event_child
)),
2392 ourstatus
->value
.sig
);
2394 if (!stabilizing_threads
)
2395 current_inferior
->last_status
= *ourstatus
;
2397 return ptid_of (event_child
);
2400 /* Get rid of any pending event in the pipe. */
2402 async_file_flush (void)
2408 ret
= read (linux_event_pipe
[0], &buf
, 1);
2409 while (ret
>= 0 || (ret
== -1 && errno
== EINTR
));
2412 /* Put something in the pipe, so the event loop wakes up. */
2414 async_file_mark (void)
2418 async_file_flush ();
2421 ret
= write (linux_event_pipe
[1], "+", 1);
2422 while (ret
== 0 || (ret
== -1 && errno
== EINTR
));
2424 /* Ignore EAGAIN. If the pipe is full, the event loop will already
2425 be awakened anyway. */
2429 linux_wait (ptid_t ptid
,
2430 struct target_waitstatus
*ourstatus
, int target_options
)
2435 fprintf (stderr
, "linux_wait: [%s]\n", target_pid_to_str (ptid
));
2437 /* Flush the async file first. */
2438 if (target_is_async_p ())
2439 async_file_flush ();
2441 event_ptid
= linux_wait_1 (ptid
, ourstatus
, target_options
);
2443 /* If at least one stop was reported, there may be more. A single
2444 SIGCHLD can signal more than one child stop. */
2445 if (target_is_async_p ()
2446 && (target_options
& TARGET_WNOHANG
) != 0
2447 && !ptid_equal (event_ptid
, null_ptid
))
2453 /* Send a signal to an LWP. */
2456 kill_lwp (unsigned long lwpid
, int signo
)
2458 /* Use tkill, if possible, in case we are using nptl threads. If tkill
2459 fails, then we are not using nptl threads and we should be using kill. */
2463 static int tkill_failed
;
2470 ret
= syscall (__NR_tkill
, lwpid
, signo
);
2471 if (errno
!= ENOSYS
)
2478 return kill (lwpid
, signo
);
2482 linux_stop_lwp (struct lwp_info
*lwp
)
2488 send_sigstop (struct lwp_info
*lwp
)
2492 pid
= lwpid_of (lwp
);
2494 /* If we already have a pending stop signal for this process, don't
2496 if (lwp
->stop_expected
)
2499 fprintf (stderr
, "Have pending sigstop for lwp %d\n", pid
);
2505 fprintf (stderr
, "Sending sigstop to lwp %d\n", pid
);
2507 lwp
->stop_expected
= 1;
2508 kill_lwp (pid
, SIGSTOP
);
2512 send_sigstop_callback (struct inferior_list_entry
*entry
, void *except
)
2514 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2516 /* Ignore EXCEPT. */
2527 /* Increment the suspend count of an LWP, and stop it, if not stopped
2530 suspend_and_send_sigstop_callback (struct inferior_list_entry
*entry
,
2533 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2535 /* Ignore EXCEPT. */
2541 return send_sigstop_callback (entry
, except
);
2545 mark_lwp_dead (struct lwp_info
*lwp
, int wstat
)
2547 /* It's dead, really. */
2550 /* Store the exit status for later. */
2551 lwp
->status_pending_p
= 1;
2552 lwp
->status_pending
= wstat
;
2554 /* Prevent trying to stop it. */
2557 /* No further stops are expected from a dead lwp. */
2558 lwp
->stop_expected
= 0;
2562 wait_for_sigstop (struct inferior_list_entry
*entry
)
2564 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2565 struct thread_info
*saved_inferior
;
2574 fprintf (stderr
, "wait_for_sigstop: LWP %ld already stopped\n",
2579 saved_inferior
= current_inferior
;
2580 if (saved_inferior
!= NULL
)
2581 saved_tid
= ((struct inferior_list_entry
*) saved_inferior
)->id
;
2583 saved_tid
= null_ptid
; /* avoid bogus unused warning */
2585 ptid
= lwp
->head
.id
;
2588 fprintf (stderr
, "wait_for_sigstop: pulling one event\n");
2590 pid
= linux_wait_for_event (ptid
, &wstat
, __WALL
);
2592 /* If we stopped with a non-SIGSTOP signal, save it for later
2593 and record the pending SIGSTOP. If the process exited, just
2595 if (WIFSTOPPED (wstat
))
2598 fprintf (stderr
, "LWP %ld stopped with signal %d\n",
2599 lwpid_of (lwp
), WSTOPSIG (wstat
));
2601 if (WSTOPSIG (wstat
) != SIGSTOP
)
2604 fprintf (stderr
, "LWP %ld stopped with non-sigstop status %06x\n",
2605 lwpid_of (lwp
), wstat
);
2607 lwp
->status_pending_p
= 1;
2608 lwp
->status_pending
= wstat
;
2614 fprintf (stderr
, "Process %d exited while stopping LWPs\n", pid
);
2616 lwp
= find_lwp_pid (pid_to_ptid (pid
));
2619 /* Leave this status pending for the next time we're able to
2620 report it. In the mean time, we'll report this lwp as
2621 dead to GDB, so GDB doesn't try to read registers and
2622 memory from it. This can only happen if this was the
2623 last thread of the process; otherwise, PID is removed
2624 from the thread tables before linux_wait_for_event
2626 mark_lwp_dead (lwp
, wstat
);
2630 if (saved_inferior
== NULL
|| linux_thread_alive (saved_tid
))
2631 current_inferior
= saved_inferior
;
2635 fprintf (stderr
, "Previously current thread died.\n");
2639 /* We can't change the current inferior behind GDB's back,
2640 otherwise, a subsequent command may apply to the wrong
2642 current_inferior
= NULL
;
2646 /* Set a valid thread as current. */
2647 set_desired_inferior (0);
2652 /* Returns true if LWP ENTRY is stopped in a jump pad, and we can't
2653 move it out, because we need to report the stop event to GDB. For
2654 example, if the user puts a breakpoint in the jump pad, it's
2655 because she wants to debug it. */
2658 stuck_in_jump_pad_callback (struct inferior_list_entry
*entry
, void *data
)
2660 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2661 struct thread_info
*thread
= get_lwp_thread (lwp
);
2663 gdb_assert (lwp
->suspended
== 0);
2664 gdb_assert (lwp
->stopped
);
2666 /* Allow debugging the jump pad, gdb_collect, etc.. */
2667 return (supports_fast_tracepoints ()
2668 && in_process_agent_loaded ()
2669 && (gdb_breakpoint_here (lwp
->stop_pc
)
2670 || lwp
->stopped_by_watchpoint
2671 || thread
->last_resume_kind
== resume_step
)
2672 && linux_fast_tracepoint_collecting (lwp
, NULL
));
2676 move_out_of_jump_pad_callback (struct inferior_list_entry
*entry
)
2678 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2679 struct thread_info
*thread
= get_lwp_thread (lwp
);
2682 gdb_assert (lwp
->suspended
== 0);
2683 gdb_assert (lwp
->stopped
);
2685 wstat
= lwp
->status_pending_p
? &lwp
->status_pending
: NULL
;
2687 /* Allow debugging the jump pad, gdb_collect, etc. */
2688 if (!gdb_breakpoint_here (lwp
->stop_pc
)
2689 && !lwp
->stopped_by_watchpoint
2690 && thread
->last_resume_kind
!= resume_step
2691 && maybe_move_out_of_jump_pad (lwp
, wstat
))
2695 "LWP %ld needs stabilizing (in jump pad)\n",
2700 lwp
->status_pending_p
= 0;
2701 enqueue_one_deferred_signal (lwp
, wstat
);
2705 "Signal %d for LWP %ld deferred "
2707 WSTOPSIG (*wstat
), lwpid_of (lwp
));
2710 linux_resume_one_lwp (lwp
, 0, 0, NULL
);
2717 lwp_running (struct inferior_list_entry
*entry
, void *data
)
2719 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
2728 /* Stop all lwps that aren't stopped yet, except EXCEPT, if not NULL.
2729 If SUSPEND, then also increase the suspend count of every LWP,
2733 stop_all_lwps (int suspend
, struct lwp_info
*except
)
2735 stopping_threads
= 1;
2738 find_inferior (&all_lwps
, suspend_and_send_sigstop_callback
, except
);
2740 find_inferior (&all_lwps
, send_sigstop_callback
, except
);
2741 for_each_inferior (&all_lwps
, wait_for_sigstop
);
2742 stopping_threads
= 0;
2745 /* Resume execution of the inferior process.
2746 If STEP is nonzero, single-step it.
2747 If SIGNAL is nonzero, give it that signal. */
2750 linux_resume_one_lwp (struct lwp_info
*lwp
,
2751 int step
, int signal
, siginfo_t
*info
)
2753 struct thread_info
*saved_inferior
;
2754 int fast_tp_collecting
;
2756 if (lwp
->stopped
== 0)
2759 fast_tp_collecting
= lwp
->collecting_fast_tracepoint
;
2761 gdb_assert (!stabilizing_threads
|| fast_tp_collecting
);
2763 /* Cancel actions that rely on GDB not changing the PC (e.g., the
2764 user used the "jump" command, or "set $pc = foo"). */
2765 if (lwp
->stop_pc
!= get_pc (lwp
))
2767 /* Collecting 'while-stepping' actions doesn't make sense
2769 release_while_stepping_state_list (get_lwp_thread (lwp
));
2772 /* If we have pending signals or status, and a new signal, enqueue the
2773 signal. Also enqueue the signal if we are waiting to reinsert a
2774 breakpoint; it will be picked up again below. */
2776 && (lwp
->status_pending_p
2777 || lwp
->pending_signals
!= NULL
2778 || lwp
->bp_reinsert
!= 0
2779 || fast_tp_collecting
))
2781 struct pending_signals
*p_sig
;
2782 p_sig
= xmalloc (sizeof (*p_sig
));
2783 p_sig
->prev
= lwp
->pending_signals
;
2784 p_sig
->signal
= signal
;
2786 memset (&p_sig
->info
, 0, sizeof (siginfo_t
));
2788 memcpy (&p_sig
->info
, info
, sizeof (siginfo_t
));
2789 lwp
->pending_signals
= p_sig
;
2792 if (lwp
->status_pending_p
)
2795 fprintf (stderr
, "Not resuming lwp %ld (%s, signal %d, stop %s);"
2796 " has pending status\n",
2797 lwpid_of (lwp
), step
? "step" : "continue", signal
,
2798 lwp
->stop_expected
? "expected" : "not expected");
2802 saved_inferior
= current_inferior
;
2803 current_inferior
= get_lwp_thread (lwp
);
2806 fprintf (stderr
, "Resuming lwp %ld (%s, signal %d, stop %s)\n",
2807 lwpid_of (lwp
), step
? "step" : "continue", signal
,
2808 lwp
->stop_expected
? "expected" : "not expected");
2810 /* This bit needs some thinking about. If we get a signal that
2811 we must report while a single-step reinsert is still pending,
2812 we often end up resuming the thread. It might be better to
2813 (ew) allow a stack of pending events; then we could be sure that
2814 the reinsert happened right away and not lose any signals.
2816 Making this stack would also shrink the window in which breakpoints are
2817 uninserted (see comment in linux_wait_for_lwp) but not enough for
2818 complete correctness, so it won't solve that problem. It may be
2819 worthwhile just to solve this one, however. */
2820 if (lwp
->bp_reinsert
!= 0)
2823 fprintf (stderr
, " pending reinsert at 0x%s\n",
2824 paddress (lwp
->bp_reinsert
));
2826 if (lwp
->bp_reinsert
!= 0 && can_hardware_single_step ())
2828 if (fast_tp_collecting
== 0)
2831 fprintf (stderr
, "BAD - reinserting but not stepping.\n");
2833 fprintf (stderr
, "BAD - reinserting and suspended(%d).\n",
2840 /* Postpone any pending signal. It was enqueued above. */
2844 if (fast_tp_collecting
== 1)
2848 lwp %ld wants to get out of fast tracepoint jump pad (exit-jump-pad-bkpt)\n",
2851 /* Postpone any pending signal. It was enqueued above. */
2854 else if (fast_tp_collecting
== 2)
2858 lwp %ld wants to get out of fast tracepoint jump pad single-stepping\n",
2861 if (can_hardware_single_step ())
2864 fatal ("moving out of jump pad single-stepping"
2865 " not implemented on this target");
2867 /* Postpone any pending signal. It was enqueued above. */
2871 /* If we have while-stepping actions in this thread set it stepping.
2872 If we have a signal to deliver, it may or may not be set to
2873 SIG_IGN, we don't know. Assume so, and allow collecting
2874 while-stepping into a signal handler. A possible smart thing to
2875 do would be to set an internal breakpoint at the signal return
2876 address, continue, and carry on catching this while-stepping
2877 action only when that breakpoint is hit. A future
2879 if (get_lwp_thread (lwp
)->while_stepping
!= NULL
2880 && can_hardware_single_step ())
2884 "lwp %ld has a while-stepping action -> forcing step.\n",
2889 if (debug_threads
&& the_low_target
.get_pc
!= NULL
)
2891 struct regcache
*regcache
= get_thread_regcache (current_inferior
, 1);
2892 CORE_ADDR pc
= (*the_low_target
.get_pc
) (regcache
);
2893 fprintf (stderr
, " resuming from pc 0x%lx\n", (long) pc
);
2896 /* If we have pending signals, consume one unless we are trying to
2897 reinsert a breakpoint or we're trying to finish a fast tracepoint
2899 if (lwp
->pending_signals
!= NULL
2900 && lwp
->bp_reinsert
== 0
2901 && fast_tp_collecting
== 0)
2903 struct pending_signals
**p_sig
;
2905 p_sig
= &lwp
->pending_signals
;
2906 while ((*p_sig
)->prev
!= NULL
)
2907 p_sig
= &(*p_sig
)->prev
;
2909 signal
= (*p_sig
)->signal
;
2910 if ((*p_sig
)->info
.si_signo
!= 0)
2911 ptrace (PTRACE_SETSIGINFO
, lwpid_of (lwp
), 0, &(*p_sig
)->info
);
2917 if (the_low_target
.prepare_to_resume
!= NULL
)
2918 the_low_target
.prepare_to_resume (lwp
);
2920 regcache_invalidate_one ((struct inferior_list_entry
*)
2921 get_lwp_thread (lwp
));
2924 lwp
->stopped_by_watchpoint
= 0;
2925 lwp
->stepping
= step
;
2926 ptrace (step
? PTRACE_SINGLESTEP
: PTRACE_CONT
, lwpid_of (lwp
), 0,
2927 /* Coerce to a uintptr_t first to avoid potential gcc warning
2928 of coercing an 8 byte integer to a 4 byte pointer. */
2929 (PTRACE_ARG4_TYPE
) (uintptr_t) signal
);
2931 current_inferior
= saved_inferior
;
2934 /* ESRCH from ptrace either means that the thread was already
2935 running (an error) or that it is gone (a race condition). If
2936 it's gone, we will get a notification the next time we wait,
2937 so we can ignore the error. We could differentiate these
2938 two, but it's tricky without waiting; the thread still exists
2939 as a zombie, so sending it signal 0 would succeed. So just
2944 perror_with_name ("ptrace");
2948 struct thread_resume_array
2950 struct thread_resume
*resume
;
2954 /* This function is called once per thread. We look up the thread
2955 in RESUME_PTR, and mark the thread with a pointer to the appropriate
2958 This algorithm is O(threads * resume elements), but resume elements
2959 is small (and will remain small at least until GDB supports thread
2962 linux_set_resume_request (struct inferior_list_entry
*entry
, void *arg
)
2964 struct lwp_info
*lwp
;
2965 struct thread_info
*thread
;
2967 struct thread_resume_array
*r
;
2969 thread
= (struct thread_info
*) entry
;
2970 lwp
= get_thread_lwp (thread
);
2973 for (ndx
= 0; ndx
< r
->n
; ndx
++)
2975 ptid_t ptid
= r
->resume
[ndx
].thread
;
2976 if (ptid_equal (ptid
, minus_one_ptid
)
2977 || ptid_equal (ptid
, entry
->id
)
2978 || (ptid_is_pid (ptid
)
2979 && (ptid_get_pid (ptid
) == pid_of (lwp
)))
2980 || (ptid_get_lwp (ptid
) == -1
2981 && (ptid_get_pid (ptid
) == pid_of (lwp
))))
2983 if (r
->resume
[ndx
].kind
== resume_stop
2984 && thread
->last_resume_kind
== resume_stop
)
2987 fprintf (stderr
, "already %s LWP %ld at GDB's request\n",
2988 thread
->last_status
.kind
== TARGET_WAITKIND_STOPPED
2996 lwp
->resume
= &r
->resume
[ndx
];
2997 thread
->last_resume_kind
= lwp
->resume
->kind
;
2999 /* If we had a deferred signal to report, dequeue one now.
3000 This can happen if LWP gets more than one signal while
3001 trying to get out of a jump pad. */
3003 && !lwp
->status_pending_p
3004 && dequeue_one_deferred_signal (lwp
, &lwp
->status_pending
))
3006 lwp
->status_pending_p
= 1;
3010 "Dequeueing deferred signal %d for LWP %ld, "
3011 "leaving status pending.\n",
3012 WSTOPSIG (lwp
->status_pending
), lwpid_of (lwp
));
3019 /* No resume action for this thread. */
3026 /* Set *FLAG_P if this lwp has an interesting status pending. */
3028 resume_status_pending_p (struct inferior_list_entry
*entry
, void *flag_p
)
3030 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
3032 /* LWPs which will not be resumed are not interesting, because
3033 we might not wait for them next time through linux_wait. */
3034 if (lwp
->resume
== NULL
)
3037 if (lwp
->status_pending_p
)
3038 * (int *) flag_p
= 1;
3043 /* Return 1 if this lwp that GDB wants running is stopped at an
3044 internal breakpoint that we need to step over. It assumes that any
3045 required STOP_PC adjustment has already been propagated to the
3046 inferior's regcache. */
3049 need_step_over_p (struct inferior_list_entry
*entry
, void *dummy
)
3051 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
3052 struct thread_info
*thread
;
3053 struct thread_info
*saved_inferior
;
3056 /* LWPs which will not be resumed are not interesting, because we
3057 might not wait for them next time through linux_wait. */
3063 "Need step over [LWP %ld]? Ignoring, not stopped\n",
3068 thread
= get_lwp_thread (lwp
);
3070 if (thread
->last_resume_kind
== resume_stop
)
3074 "Need step over [LWP %ld]? Ignoring, should remain stopped\n",
3079 gdb_assert (lwp
->suspended
>= 0);
3085 "Need step over [LWP %ld]? Ignoring, suspended\n",
3090 if (!lwp
->need_step_over
)
3094 "Need step over [LWP %ld]? No\n", lwpid_of (lwp
));
3097 if (lwp
->status_pending_p
)
3101 "Need step over [LWP %ld]? Ignoring, has pending status.\n",
3106 /* Note: PC, not STOP_PC. Either GDB has adjusted the PC already,
3110 /* If the PC has changed since we stopped, then don't do anything,
3111 and let the breakpoint/tracepoint be hit. This happens if, for
3112 instance, GDB handled the decr_pc_after_break subtraction itself,
3113 GDB is OOL stepping this thread, or the user has issued a "jump"
3114 command, or poked thread's registers herself. */
3115 if (pc
!= lwp
->stop_pc
)
3119 "Need step over [LWP %ld]? Cancelling, PC was changed. "
3120 "Old stop_pc was 0x%s, PC is now 0x%s\n",
3121 lwpid_of (lwp
), paddress (lwp
->stop_pc
), paddress (pc
));
3123 lwp
->need_step_over
= 0;
3127 saved_inferior
= current_inferior
;
3128 current_inferior
= thread
;
3130 /* We can only step over breakpoints we know about. */
3131 if (breakpoint_here (pc
) || fast_tracepoint_jump_here (pc
))
3133 /* Don't step over a breakpoint that GDB expects to hit
3135 if (gdb_breakpoint_here (pc
))
3139 "Need step over [LWP %ld]? yes, but found"
3140 " GDB breakpoint at 0x%s; skipping step over\n",
3141 lwpid_of (lwp
), paddress (pc
));
3143 current_inferior
= saved_inferior
;
3150 "Need step over [LWP %ld]? yes, found breakpoint at 0x%s\n",
3151 lwpid_of (lwp
), paddress (pc
));
3153 /* We've found an lwp that needs stepping over --- return 1 so
3154 that find_inferior stops looking. */
3155 current_inferior
= saved_inferior
;
3157 /* If the step over is cancelled, this is set again. */
3158 lwp
->need_step_over
= 0;
3163 current_inferior
= saved_inferior
;
3167 "Need step over [LWP %ld]? No, no breakpoint found at 0x%s\n",
3168 lwpid_of (lwp
), paddress (pc
));
3173 /* Start a step-over operation on LWP. When LWP stopped at a
3174 breakpoint, to make progress, we need to remove the breakpoint out
3175 of the way. If we let other threads run while we do that, they may
3176 pass by the breakpoint location and miss hitting it. To avoid
3177 that, a step-over momentarily stops all threads while LWP is
3178 single-stepped while the breakpoint is temporarily uninserted from
3179 the inferior. When the single-step finishes, we reinsert the
3180 breakpoint, and let all threads that are supposed to be running,
3183 On targets that don't support hardware single-step, we don't
3184 currently support full software single-stepping. Instead, we only
3185 support stepping over the thread event breakpoint, by asking the
3186 low target where to place a reinsert breakpoint. Since this
3187 routine assumes the breakpoint being stepped over is a thread event
3188 breakpoint, it usually assumes the return address of the current
3189 function is a good enough place to set the reinsert breakpoint. */
3192 start_step_over (struct lwp_info
*lwp
)
3194 struct thread_info
*saved_inferior
;
3200 "Starting step-over on LWP %ld. Stopping all threads\n",
3203 stop_all_lwps (1, lwp
);
3204 gdb_assert (lwp
->suspended
== 0);
3207 fprintf (stderr
, "Done stopping all threads for step-over.\n");
3209 /* Note, we should always reach here with an already adjusted PC,
3210 either by GDB (if we're resuming due to GDB's request), or by our
3211 caller, if we just finished handling an internal breakpoint GDB
3212 shouldn't care about. */
3215 saved_inferior
= current_inferior
;
3216 current_inferior
= get_lwp_thread (lwp
);
3218 lwp
->bp_reinsert
= pc
;
3219 uninsert_breakpoints_at (pc
);
3220 uninsert_fast_tracepoint_jumps_at (pc
);
3222 if (can_hardware_single_step ())
3228 CORE_ADDR raddr
= (*the_low_target
.breakpoint_reinsert_addr
) ();
3229 set_reinsert_breakpoint (raddr
);
3233 current_inferior
= saved_inferior
;
3235 linux_resume_one_lwp (lwp
, step
, 0, NULL
);
3237 /* Require next event from this LWP. */
3238 step_over_bkpt
= lwp
->head
.id
;
3242 /* Finish a step-over. Reinsert the breakpoint we had uninserted in
3243 start_step_over, if still there, and delete any reinsert
3244 breakpoints we've set, on non hardware single-step targets. */
3247 finish_step_over (struct lwp_info
*lwp
)
3249 if (lwp
->bp_reinsert
!= 0)
3252 fprintf (stderr
, "Finished step over.\n");
3254 /* Reinsert any breakpoint at LWP->BP_REINSERT. Note that there
3255 may be no breakpoint to reinsert there by now. */
3256 reinsert_breakpoints_at (lwp
->bp_reinsert
);
3257 reinsert_fast_tracepoint_jumps_at (lwp
->bp_reinsert
);
3259 lwp
->bp_reinsert
= 0;
3261 /* Delete any software-single-step reinsert breakpoints. No
3262 longer needed. We don't have to worry about other threads
3263 hitting this trap, and later not being able to explain it,
3264 because we were stepping over a breakpoint, and we hold all
3265 threads but LWP stopped while doing that. */
3266 if (!can_hardware_single_step ())
3267 delete_reinsert_breakpoints ();
3269 step_over_bkpt
= null_ptid
;
3276 /* This function is called once per thread. We check the thread's resume
3277 request, which will tell us whether to resume, step, or leave the thread
3278 stopped; and what signal, if any, it should be sent.
3280 For threads which we aren't explicitly told otherwise, we preserve
3281 the stepping flag; this is used for stepping over gdbserver-placed
3284 If pending_flags was set in any thread, we queue any needed
3285 signals, since we won't actually resume. We already have a pending
3286 event to report, so we don't need to preserve any step requests;
3287 they should be re-issued if necessary. */
3290 linux_resume_one_thread (struct inferior_list_entry
*entry
, void *arg
)
3292 struct lwp_info
*lwp
;
3293 struct thread_info
*thread
;
3295 int leave_all_stopped
= * (int *) arg
;
3298 thread
= (struct thread_info
*) entry
;
3299 lwp
= get_thread_lwp (thread
);
3301 if (lwp
->resume
== NULL
)
3304 if (lwp
->resume
->kind
== resume_stop
)
3307 fprintf (stderr
, "resume_stop request for LWP %ld\n", lwpid_of (lwp
));
3312 fprintf (stderr
, "stopping LWP %ld\n", lwpid_of (lwp
));
3314 /* Stop the thread, and wait for the event asynchronously,
3315 through the event loop. */
3321 fprintf (stderr
, "already stopped LWP %ld\n",
3324 /* The LWP may have been stopped in an internal event that
3325 was not meant to be notified back to GDB (e.g., gdbserver
3326 breakpoint), so we should be reporting a stop event in
3329 /* If the thread already has a pending SIGSTOP, this is a
3330 no-op. Otherwise, something later will presumably resume
3331 the thread and this will cause it to cancel any pending
3332 operation, due to last_resume_kind == resume_stop. If
3333 the thread already has a pending status to report, we
3334 will still report it the next time we wait - see
3335 status_pending_p_callback. */
3339 /* For stop requests, we're done. */
3341 thread
->last_status
.kind
= TARGET_WAITKIND_IGNORE
;
3345 /* If this thread which is about to be resumed has a pending status,
3346 then don't resume any threads - we can just report the pending
3347 status. Make sure to queue any signals that would otherwise be
3348 sent. In all-stop mode, we do this decision based on if *any*
3349 thread has a pending status. If there's a thread that needs the
3350 step-over-breakpoint dance, then don't resume any other thread
3351 but that particular one. */
3352 leave_pending
= (lwp
->status_pending_p
|| leave_all_stopped
);
3357 fprintf (stderr
, "resuming LWP %ld\n", lwpid_of (lwp
));
3359 step
= (lwp
->resume
->kind
== resume_step
);
3360 linux_resume_one_lwp (lwp
, step
, lwp
->resume
->sig
, NULL
);
3365 fprintf (stderr
, "leaving LWP %ld stopped\n", lwpid_of (lwp
));
3367 /* If we have a new signal, enqueue the signal. */
3368 if (lwp
->resume
->sig
!= 0)
3370 struct pending_signals
*p_sig
;
3371 p_sig
= xmalloc (sizeof (*p_sig
));
3372 p_sig
->prev
= lwp
->pending_signals
;
3373 p_sig
->signal
= lwp
->resume
->sig
;
3374 memset (&p_sig
->info
, 0, sizeof (siginfo_t
));
3376 /* If this is the same signal we were previously stopped by,
3377 make sure to queue its siginfo. We can ignore the return
3378 value of ptrace; if it fails, we'll skip
3379 PTRACE_SETSIGINFO. */
3380 if (WIFSTOPPED (lwp
->last_status
)
3381 && WSTOPSIG (lwp
->last_status
) == lwp
->resume
->sig
)
3382 ptrace (PTRACE_GETSIGINFO
, lwpid_of (lwp
), 0, &p_sig
->info
);
3384 lwp
->pending_signals
= p_sig
;
3388 thread
->last_status
.kind
= TARGET_WAITKIND_IGNORE
;
3394 linux_resume (struct thread_resume
*resume_info
, size_t n
)
3396 struct thread_resume_array array
= { resume_info
, n
};
3397 struct lwp_info
*need_step_over
= NULL
;
3399 int leave_all_stopped
;
3401 find_inferior (&all_threads
, linux_set_resume_request
, &array
);
3403 /* If there is a thread which would otherwise be resumed, which has
3404 a pending status, then don't resume any threads - we can just
3405 report the pending status. Make sure to queue any signals that
3406 would otherwise be sent. In non-stop mode, we'll apply this
3407 logic to each thread individually. We consume all pending events
3408 before considering to start a step-over (in all-stop). */
3411 find_inferior (&all_lwps
, resume_status_pending_p
, &any_pending
);
3413 /* If there is a thread which would otherwise be resumed, which is
3414 stopped at a breakpoint that needs stepping over, then don't
3415 resume any threads - have it step over the breakpoint with all
3416 other threads stopped, then resume all threads again. Make sure
3417 to queue any signals that would otherwise be delivered or
3419 if (!any_pending
&& supports_breakpoints ())
3421 = (struct lwp_info
*) find_inferior (&all_lwps
,
3422 need_step_over_p
, NULL
);
3424 leave_all_stopped
= (need_step_over
!= NULL
|| any_pending
);
3428 if (need_step_over
!= NULL
)
3429 fprintf (stderr
, "Not resuming all, need step over\n");
3430 else if (any_pending
)
3432 "Not resuming, all-stop and found "
3433 "an LWP with pending status\n");
3435 fprintf (stderr
, "Resuming, no pending status or step over needed\n");
3438 /* Even if we're leaving threads stopped, queue all signals we'd
3439 otherwise deliver. */
3440 find_inferior (&all_threads
, linux_resume_one_thread
, &leave_all_stopped
);
3443 start_step_over (need_step_over
);
3446 /* This function is called once per thread. We check the thread's
3447 last resume request, which will tell us whether to resume, step, or
3448 leave the thread stopped. Any signal the client requested to be
3449 delivered has already been enqueued at this point.
3451 If any thread that GDB wants running is stopped at an internal
3452 breakpoint that needs stepping over, we start a step-over operation
3453 on that particular thread, and leave all others stopped. */
3456 proceed_one_lwp (struct inferior_list_entry
*entry
, void *except
)
3458 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
3459 struct thread_info
*thread
;
3467 "proceed_one_lwp: lwp %ld\n", lwpid_of (lwp
));
3472 fprintf (stderr
, " LWP %ld already running\n", lwpid_of (lwp
));
3476 thread
= get_lwp_thread (lwp
);
3478 if (thread
->last_resume_kind
== resume_stop
3479 && thread
->last_status
.kind
!= TARGET_WAITKIND_IGNORE
)
3482 fprintf (stderr
, " client wants LWP to remain %ld stopped\n",
3487 if (lwp
->status_pending_p
)
3490 fprintf (stderr
, " LWP %ld has pending status, leaving stopped\n",
3495 gdb_assert (lwp
->suspended
>= 0);
3500 fprintf (stderr
, " LWP %ld is suspended\n", lwpid_of (lwp
));
3504 if (thread
->last_resume_kind
== resume_stop
)
3506 /* We haven't reported this LWP as stopped yet (otherwise, the
3507 last_status.kind check above would catch it, and we wouldn't
3508 reach here. This LWP may have been momentarily paused by a
3509 stop_all_lwps call while handling for example, another LWP's
3510 step-over. In that case, the pending expected SIGSTOP signal
3511 that was queued at vCont;t handling time will have already
3512 been consumed by wait_for_sigstop, and so we need to requeue
3513 another one here. Note that if the LWP already has a SIGSTOP
3514 pending, this is a no-op. */
3518 "Client wants LWP %ld to stop. "
3519 "Making sure it has a SIGSTOP pending\n",
3525 step
= thread
->last_resume_kind
== resume_step
;
3526 linux_resume_one_lwp (lwp
, step
, 0, NULL
);
3531 unsuspend_and_proceed_one_lwp (struct inferior_list_entry
*entry
, void *except
)
3533 struct lwp_info
*lwp
= (struct lwp_info
*) entry
;
3539 gdb_assert (lwp
->suspended
>= 0);
3541 return proceed_one_lwp (entry
, except
);
3544 /* When we finish a step-over, set threads running again. If there's
3545 another thread that may need a step-over, now's the time to start
3546 it. Eventually, we'll move all threads past their breakpoints. */
3549 proceed_all_lwps (void)
3551 struct lwp_info
*need_step_over
;
3553 /* If there is a thread which would otherwise be resumed, which is
3554 stopped at a breakpoint that needs stepping over, then don't
3555 resume any threads - have it step over the breakpoint with all
3556 other threads stopped, then resume all threads again. */
3558 if (supports_breakpoints ())
3561 = (struct lwp_info
*) find_inferior (&all_lwps
,
3562 need_step_over_p
, NULL
);
3564 if (need_step_over
!= NULL
)
3567 fprintf (stderr
, "proceed_all_lwps: found "
3568 "thread %ld needing a step-over\n",
3569 lwpid_of (need_step_over
));
3571 start_step_over (need_step_over
);
3577 fprintf (stderr
, "Proceeding, no step-over needed\n");
3579 find_inferior (&all_lwps
, proceed_one_lwp
, NULL
);
3582 /* Stopped LWPs that the client wanted to be running, that don't have
3583 pending statuses, are set to run again, except for EXCEPT, if not
3584 NULL. This undoes a stop_all_lwps call. */
3587 unstop_all_lwps (int unsuspend
, struct lwp_info
*except
)
3593 "unstopping all lwps, except=(LWP %ld)\n", lwpid_of (except
));
3596 "unstopping all lwps\n");
3600 find_inferior (&all_lwps
, unsuspend_and_proceed_one_lwp
, except
);
3602 find_inferior (&all_lwps
, proceed_one_lwp
, except
);
3605 #ifdef HAVE_LINUX_USRREGS
3608 register_addr (int regnum
)
3612 if (regnum
< 0 || regnum
>= the_low_target
.num_regs
)
3613 error ("Invalid register number %d.", regnum
);
3615 addr
= the_low_target
.regmap
[regnum
];
3620 /* Fetch one register. */
3622 fetch_register (struct regcache
*regcache
, int regno
)
3629 if (regno
>= the_low_target
.num_regs
)
3631 if ((*the_low_target
.cannot_fetch_register
) (regno
))
3634 regaddr
= register_addr (regno
);
3638 pid
= lwpid_of (get_thread_lwp (current_inferior
));
3639 size
= ((register_size (regno
) + sizeof (PTRACE_XFER_TYPE
) - 1)
3640 & - sizeof (PTRACE_XFER_TYPE
));
3641 buf
= alloca (size
);
3642 for (i
= 0; i
< size
; i
+= sizeof (PTRACE_XFER_TYPE
))
3645 *(PTRACE_XFER_TYPE
*) (buf
+ i
) =
3646 ptrace (PTRACE_PEEKUSER
, pid
,
3647 /* Coerce to a uintptr_t first to avoid potential gcc warning
3648 of coercing an 8 byte integer to a 4 byte pointer. */
3649 (PTRACE_ARG3_TYPE
) (uintptr_t) regaddr
, 0);
3650 regaddr
+= sizeof (PTRACE_XFER_TYPE
);
3652 error ("reading register %d: %s", regno
, strerror (errno
));
3655 if (the_low_target
.supply_ptrace_register
)
3656 the_low_target
.supply_ptrace_register (regcache
, regno
, buf
);
3658 supply_register (regcache
, regno
, buf
);
3661 /* Fetch all registers, or just one, from the child process. */
3663 usr_fetch_inferior_registers (struct regcache
*regcache
, int regno
)
3666 for (regno
= 0; regno
< the_low_target
.num_regs
; regno
++)
3667 fetch_register (regcache
, regno
);
3669 fetch_register (regcache
, regno
);
3672 /* Store our register values back into the inferior.
3673 If REGNO is -1, do this for all registers.
3674 Otherwise, REGNO specifies which register (so we can save time). */
3676 usr_store_inferior_registers (struct regcache
*regcache
, int regno
)
3685 if (regno
>= the_low_target
.num_regs
)
3688 if ((*the_low_target
.cannot_store_register
) (regno
) == 1)
3691 regaddr
= register_addr (regno
);
3695 size
= (register_size (regno
) + sizeof (PTRACE_XFER_TYPE
) - 1)
3696 & - sizeof (PTRACE_XFER_TYPE
);
3697 buf
= alloca (size
);
3698 memset (buf
, 0, size
);
3700 if (the_low_target
.collect_ptrace_register
)
3701 the_low_target
.collect_ptrace_register (regcache
, regno
, buf
);
3703 collect_register (regcache
, regno
, buf
);
3705 pid
= lwpid_of (get_thread_lwp (current_inferior
));
3706 for (i
= 0; i
< size
; i
+= sizeof (PTRACE_XFER_TYPE
))
3709 ptrace (PTRACE_POKEUSER
, pid
,
3710 /* Coerce to a uintptr_t first to avoid potential gcc warning
3711 about coercing an 8 byte integer to a 4 byte pointer. */
3712 (PTRACE_ARG3_TYPE
) (uintptr_t) regaddr
,
3713 (PTRACE_ARG4_TYPE
) *(PTRACE_XFER_TYPE
*) (buf
+ i
));
3716 /* At this point, ESRCH should mean the process is
3717 already gone, in which case we simply ignore attempts
3718 to change its registers. See also the related
3719 comment in linux_resume_one_lwp. */
3723 if ((*the_low_target
.cannot_store_register
) (regno
) == 0)
3724 error ("writing register %d: %s", regno
, strerror (errno
));
3726 regaddr
+= sizeof (PTRACE_XFER_TYPE
);
3730 for (regno
= 0; regno
< the_low_target
.num_regs
; regno
++)
3731 usr_store_inferior_registers (regcache
, regno
);
3733 #endif /* HAVE_LINUX_USRREGS */
3737 #ifdef HAVE_LINUX_REGSETS
3740 regsets_fetch_inferior_registers (struct regcache
*regcache
)
3742 struct regset_info
*regset
;
3743 int saw_general_regs
= 0;
3747 regset
= target_regsets
;
3749 pid
= lwpid_of (get_thread_lwp (current_inferior
));
3750 while (regset
->size
>= 0)
3755 if (regset
->size
== 0 || disabled_regsets
[regset
- target_regsets
])
3761 buf
= xmalloc (regset
->size
);
3763 nt_type
= regset
->nt_type
;
3767 iov
.iov_len
= regset
->size
;
3768 data
= (void *) &iov
;
3774 res
= ptrace (regset
->get_request
, pid
, nt_type
, data
);
3776 res
= ptrace (regset
->get_request
, pid
, data
, nt_type
);
3782 /* If we get EIO on a regset, do not try it again for
3784 disabled_regsets
[regset
- target_regsets
] = 1;
3791 sprintf (s
, "ptrace(regsets_fetch_inferior_registers) PID=%d",
3796 else if (regset
->type
== GENERAL_REGS
)
3797 saw_general_regs
= 1;
3798 regset
->store_function (regcache
, buf
);
3802 if (saw_general_regs
)
3809 regsets_store_inferior_registers (struct regcache
*regcache
)
3811 struct regset_info
*regset
;
3812 int saw_general_regs
= 0;
3816 regset
= target_regsets
;
3818 pid
= lwpid_of (get_thread_lwp (current_inferior
));
3819 while (regset
->size
>= 0)
3824 if (regset
->size
== 0 || disabled_regsets
[regset
- target_regsets
])
3830 buf
= xmalloc (regset
->size
);
3832 /* First fill the buffer with the current register set contents,
3833 in case there are any items in the kernel's regset that are
3834 not in gdbserver's regcache. */
3836 nt_type
= regset
->nt_type
;
3840 iov
.iov_len
= regset
->size
;
3841 data
= (void *) &iov
;
3847 res
= ptrace (regset
->get_request
, pid
, nt_type
, data
);
3849 res
= ptrace (regset
->get_request
, pid
, &iov
, data
);
3854 /* Then overlay our cached registers on that. */
3855 regset
->fill_function (regcache
, buf
);
3857 /* Only now do we write the register set. */
3859 res
= ptrace (regset
->set_request
, pid
, nt_type
, data
);
3861 res
= ptrace (regset
->set_request
, pid
, data
, nt_type
);
3869 /* If we get EIO on a regset, do not try it again for
3871 disabled_regsets
[regset
- target_regsets
] = 1;
3875 else if (errno
== ESRCH
)
3877 /* At this point, ESRCH should mean the process is
3878 already gone, in which case we simply ignore attempts
3879 to change its registers. See also the related
3880 comment in linux_resume_one_lwp. */
3886 perror ("Warning: ptrace(regsets_store_inferior_registers)");
3889 else if (regset
->type
== GENERAL_REGS
)
3890 saw_general_regs
= 1;
3894 if (saw_general_regs
)
3901 #endif /* HAVE_LINUX_REGSETS */
3905 linux_fetch_registers (struct regcache
*regcache
, int regno
)
3907 #ifdef HAVE_LINUX_REGSETS
3908 if (regsets_fetch_inferior_registers (regcache
) == 0)
3911 #ifdef HAVE_LINUX_USRREGS
3912 usr_fetch_inferior_registers (regcache
, regno
);
3917 linux_store_registers (struct regcache
*regcache
, int regno
)
3919 #ifdef HAVE_LINUX_REGSETS
3920 if (regsets_store_inferior_registers (regcache
) == 0)
3923 #ifdef HAVE_LINUX_USRREGS
3924 usr_store_inferior_registers (regcache
, regno
);
3929 /* Copy LEN bytes from inferior's memory starting at MEMADDR
3930 to debugger memory starting at MYADDR. */
3933 linux_read_memory (CORE_ADDR memaddr
, unsigned char *myaddr
, int len
)
3936 /* Round starting address down to longword boundary. */
3937 register CORE_ADDR addr
= memaddr
& -(CORE_ADDR
) sizeof (PTRACE_XFER_TYPE
);
3938 /* Round ending address up; get number of longwords that makes. */
3940 = (((memaddr
+ len
) - addr
) + sizeof (PTRACE_XFER_TYPE
) - 1)
3941 / sizeof (PTRACE_XFER_TYPE
);
3942 /* Allocate buffer of that many longwords. */
3943 register PTRACE_XFER_TYPE
*buffer
3944 = (PTRACE_XFER_TYPE
*) alloca (count
* sizeof (PTRACE_XFER_TYPE
));
3947 int pid
= lwpid_of (get_thread_lwp (current_inferior
));
3949 /* Try using /proc. Don't bother for one word. */
3950 if (len
>= 3 * sizeof (long))
3952 /* We could keep this file open and cache it - possibly one per
3953 thread. That requires some juggling, but is even faster. */
3954 sprintf (filename
, "/proc/%d/mem", pid
);
3955 fd
= open (filename
, O_RDONLY
| O_LARGEFILE
);
3959 /* If pread64 is available, use it. It's faster if the kernel
3960 supports it (only one syscall), and it's 64-bit safe even on
3961 32-bit platforms (for instance, SPARC debugging a SPARC64
3964 if (pread64 (fd
, myaddr
, len
, memaddr
) != len
)
3966 if (lseek (fd
, memaddr
, SEEK_SET
) == -1 || read (fd
, myaddr
, len
) != len
)
3978 /* Read all the longwords */
3979 for (i
= 0; i
< count
; i
++, addr
+= sizeof (PTRACE_XFER_TYPE
))
3982 /* Coerce the 3rd arg to a uintptr_t first to avoid potential gcc warning
3983 about coercing an 8 byte integer to a 4 byte pointer. */
3984 buffer
[i
] = ptrace (PTRACE_PEEKTEXT
, pid
,
3985 (PTRACE_ARG3_TYPE
) (uintptr_t) addr
, 0);
3990 /* Copy appropriate bytes out of the buffer. */
3992 (char *) buffer
+ (memaddr
& (sizeof (PTRACE_XFER_TYPE
) - 1)),
3998 /* Copy LEN bytes of data from debugger memory at MYADDR to inferior's
3999 memory at MEMADDR. On failure (cannot write to the inferior)
4000 returns the value of errno. */
4003 linux_write_memory (CORE_ADDR memaddr
, const unsigned char *myaddr
, int len
)
4006 /* Round starting address down to longword boundary. */
4007 register CORE_ADDR addr
= memaddr
& -(CORE_ADDR
) sizeof (PTRACE_XFER_TYPE
);
4008 /* Round ending address up; get number of longwords that makes. */
4010 = (((memaddr
+ len
) - addr
) + sizeof (PTRACE_XFER_TYPE
) - 1) / sizeof (PTRACE_XFER_TYPE
);
4011 /* Allocate buffer of that many longwords. */
4012 register PTRACE_XFER_TYPE
*buffer
= (PTRACE_XFER_TYPE
*) alloca (count
* sizeof (PTRACE_XFER_TYPE
));
4013 int pid
= lwpid_of (get_thread_lwp (current_inferior
));
4017 /* Dump up to four bytes. */
4018 unsigned int val
= * (unsigned int *) myaddr
;
4024 val
= val
& 0xffffff;
4025 fprintf (stderr
, "Writing %0*x to 0x%08lx\n", 2 * ((len
< 4) ? len
: 4),
4026 val
, (long)memaddr
);
4029 /* Fill start and end extra bytes of buffer with existing memory data. */
4032 /* Coerce the 3rd arg to a uintptr_t first to avoid potential gcc warning
4033 about coercing an 8 byte integer to a 4 byte pointer. */
4034 buffer
[0] = ptrace (PTRACE_PEEKTEXT
, pid
,
4035 (PTRACE_ARG3_TYPE
) (uintptr_t) addr
, 0);
4043 = ptrace (PTRACE_PEEKTEXT
, pid
,
4044 /* Coerce to a uintptr_t first to avoid potential gcc warning
4045 about coercing an 8 byte integer to a 4 byte pointer. */
4046 (PTRACE_ARG3_TYPE
) (uintptr_t) (addr
+ (count
- 1)
4047 * sizeof (PTRACE_XFER_TYPE
)),
4053 /* Copy data to be written over corresponding part of buffer. */
4055 memcpy ((char *) buffer
+ (memaddr
& (sizeof (PTRACE_XFER_TYPE
) - 1)), myaddr
, len
);
4057 /* Write the entire buffer. */
4059 for (i
= 0; i
< count
; i
++, addr
+= sizeof (PTRACE_XFER_TYPE
))
4062 ptrace (PTRACE_POKETEXT
, pid
,
4063 /* Coerce to a uintptr_t first to avoid potential gcc warning
4064 about coercing an 8 byte integer to a 4 byte pointer. */
4065 (PTRACE_ARG3_TYPE
) (uintptr_t) addr
,
4066 (PTRACE_ARG4_TYPE
) buffer
[i
]);
4074 /* Non-zero if the kernel supports PTRACE_O_TRACEFORK. */
4075 static int linux_supports_tracefork_flag
;
4078 linux_enable_event_reporting (int pid
)
4080 if (!linux_supports_tracefork_flag
)
4083 ptrace (PTRACE_SETOPTIONS
, pid
, 0, (PTRACE_ARG4_TYPE
) PTRACE_O_TRACECLONE
);
4086 /* Helper functions for linux_test_for_tracefork, called via clone (). */
4089 linux_tracefork_grandchild (void *arg
)
4094 #define STACK_SIZE 4096
4097 linux_tracefork_child (void *arg
)
4099 ptrace (PTRACE_TRACEME
, 0, 0, 0);
4100 kill (getpid (), SIGSTOP
);
4102 #if !(defined(__UCLIBC__) && defined(HAS_NOMMU))
4105 linux_tracefork_grandchild (NULL
);
4107 #else /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4110 __clone2 (linux_tracefork_grandchild
, arg
, STACK_SIZE
,
4111 CLONE_VM
| SIGCHLD
, NULL
);
4113 clone (linux_tracefork_grandchild
, arg
+ STACK_SIZE
,
4114 CLONE_VM
| SIGCHLD
, NULL
);
4117 #endif /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4122 /* Determine if PTRACE_O_TRACEFORK can be used to follow fork events. Make
4123 sure that we can enable the option, and that it had the desired
4127 linux_test_for_tracefork (void)
4129 int child_pid
, ret
, status
;
4131 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
4132 char *stack
= xmalloc (STACK_SIZE
* 4);
4133 #endif /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4135 linux_supports_tracefork_flag
= 0;
4137 #if !(defined(__UCLIBC__) && defined(HAS_NOMMU))
4139 child_pid
= fork ();
4141 linux_tracefork_child (NULL
);
4143 #else /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4145 /* Use CLONE_VM instead of fork, to support uClinux (no MMU). */
4147 child_pid
= __clone2 (linux_tracefork_child
, stack
, STACK_SIZE
,
4148 CLONE_VM
| SIGCHLD
, stack
+ STACK_SIZE
* 2);
4149 #else /* !__ia64__ */
4150 child_pid
= clone (linux_tracefork_child
, stack
+ STACK_SIZE
,
4151 CLONE_VM
| SIGCHLD
, stack
+ STACK_SIZE
* 2);
4152 #endif /* !__ia64__ */
4154 #endif /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4156 if (child_pid
== -1)
4157 perror_with_name ("clone");
4159 ret
= my_waitpid (child_pid
, &status
, 0);
4161 perror_with_name ("waitpid");
4162 else if (ret
!= child_pid
)
4163 error ("linux_test_for_tracefork: waitpid: unexpected result %d.", ret
);
4164 if (! WIFSTOPPED (status
))
4165 error ("linux_test_for_tracefork: waitpid: unexpected status %d.", status
);
4167 ret
= ptrace (PTRACE_SETOPTIONS
, child_pid
, 0,
4168 (PTRACE_ARG4_TYPE
) PTRACE_O_TRACEFORK
);
4171 ret
= ptrace (PTRACE_KILL
, child_pid
, 0, 0);
4174 warning ("linux_test_for_tracefork: failed to kill child");
4178 ret
= my_waitpid (child_pid
, &status
, 0);
4179 if (ret
!= child_pid
)
4180 warning ("linux_test_for_tracefork: failed to wait for killed child");
4181 else if (!WIFSIGNALED (status
))
4182 warning ("linux_test_for_tracefork: unexpected wait status 0x%x from "
4183 "killed child", status
);
4188 ret
= ptrace (PTRACE_CONT
, child_pid
, 0, 0);
4190 warning ("linux_test_for_tracefork: failed to resume child");
4192 ret
= my_waitpid (child_pid
, &status
, 0);
4194 if (ret
== child_pid
&& WIFSTOPPED (status
)
4195 && status
>> 16 == PTRACE_EVENT_FORK
)
4198 ret
= ptrace (PTRACE_GETEVENTMSG
, child_pid
, 0, &second_pid
);
4199 if (ret
== 0 && second_pid
!= 0)
4203 linux_supports_tracefork_flag
= 1;
4204 my_waitpid (second_pid
, &second_status
, 0);
4205 ret
= ptrace (PTRACE_KILL
, second_pid
, 0, 0);
4207 warning ("linux_test_for_tracefork: failed to kill second child");
4208 my_waitpid (second_pid
, &status
, 0);
4212 warning ("linux_test_for_tracefork: unexpected result from waitpid "
4213 "(%d, status 0x%x)", ret
, status
);
4217 ret
= ptrace (PTRACE_KILL
, child_pid
, 0, 0);
4219 warning ("linux_test_for_tracefork: failed to kill child");
4220 my_waitpid (child_pid
, &status
, 0);
4222 while (WIFSTOPPED (status
));
4224 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
4226 #endif /* defined(__UCLIBC__) && defined(HAS_NOMMU) */
4231 linux_look_up_symbols (void)
4233 #ifdef USE_THREAD_DB
4234 struct process_info
*proc
= current_process ();
4236 if (proc
->private->thread_db
!= NULL
)
4239 /* If the kernel supports tracing forks then it also supports tracing
4240 clones, and then we don't need to use the magic thread event breakpoint
4241 to learn about threads. */
4242 thread_db_init (!linux_supports_tracefork_flag
);
4247 linux_request_interrupt (void)
4249 extern unsigned long signal_pid
;
4251 if (!ptid_equal (cont_thread
, null_ptid
)
4252 && !ptid_equal (cont_thread
, minus_one_ptid
))
4254 struct lwp_info
*lwp
;
4257 lwp
= get_thread_lwp (current_inferior
);
4258 lwpid
= lwpid_of (lwp
);
4259 kill_lwp (lwpid
, SIGINT
);
4262 kill_lwp (signal_pid
, SIGINT
);
4265 /* Copy LEN bytes from inferior's auxiliary vector starting at OFFSET
4266 to debugger memory starting at MYADDR. */
4269 linux_read_auxv (CORE_ADDR offset
, unsigned char *myaddr
, unsigned int len
)
4271 char filename
[PATH_MAX
];
4273 int pid
= lwpid_of (get_thread_lwp (current_inferior
));
4275 snprintf (filename
, sizeof filename
, "/proc/%d/auxv", pid
);
4277 fd
= open (filename
, O_RDONLY
);
4281 if (offset
!= (CORE_ADDR
) 0
4282 && lseek (fd
, (off_t
) offset
, SEEK_SET
) != (off_t
) offset
)
4285 n
= read (fd
, myaddr
, len
);
4292 /* These breakpoint and watchpoint related wrapper functions simply
4293 pass on the function call if the target has registered a
4294 corresponding function. */
4297 linux_insert_point (char type
, CORE_ADDR addr
, int len
)
4299 if (the_low_target
.insert_point
!= NULL
)
4300 return the_low_target
.insert_point (type
, addr
, len
);
4302 /* Unsupported (see target.h). */
4307 linux_remove_point (char type
, CORE_ADDR addr
, int len
)
4309 if (the_low_target
.remove_point
!= NULL
)
4310 return the_low_target
.remove_point (type
, addr
, len
);
4312 /* Unsupported (see target.h). */
4317 linux_stopped_by_watchpoint (void)
4319 struct lwp_info
*lwp
= get_thread_lwp (current_inferior
);
4321 return lwp
->stopped_by_watchpoint
;
4325 linux_stopped_data_address (void)
4327 struct lwp_info
*lwp
= get_thread_lwp (current_inferior
);
4329 return lwp
->stopped_data_address
;
4332 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
4333 #if defined(__mcoldfire__)
4334 /* These should really be defined in the kernel's ptrace.h header. */
4335 #define PT_TEXT_ADDR 49*4
4336 #define PT_DATA_ADDR 50*4
4337 #define PT_TEXT_END_ADDR 51*4
4340 /* Under uClinux, programs are loaded at non-zero offsets, which we need
4341 to tell gdb about. */
4344 linux_read_offsets (CORE_ADDR
*text_p
, CORE_ADDR
*data_p
)
4346 #if defined(PT_TEXT_ADDR) && defined(PT_DATA_ADDR) && defined(PT_TEXT_END_ADDR)
4347 unsigned long text
, text_end
, data
;
4348 int pid
= lwpid_of (get_thread_lwp (current_inferior
));
4352 text
= ptrace (PTRACE_PEEKUSER
, pid
, (long)PT_TEXT_ADDR
, 0);
4353 text_end
= ptrace (PTRACE_PEEKUSER
, pid
, (long)PT_TEXT_END_ADDR
, 0);
4354 data
= ptrace (PTRACE_PEEKUSER
, pid
, (long)PT_DATA_ADDR
, 0);
4358 /* Both text and data offsets produced at compile-time (and so
4359 used by gdb) are relative to the beginning of the program,
4360 with the data segment immediately following the text segment.
4361 However, the actual runtime layout in memory may put the data
4362 somewhere else, so when we send gdb a data base-address, we
4363 use the real data base address and subtract the compile-time
4364 data base-address from it (which is just the length of the
4365 text segment). BSS immediately follows data in both
4368 *data_p
= data
- (text_end
- text
);
4378 compare_ints (const void *xa
, const void *xb
)
4380 int a
= *(const int *)xa
;
4381 int b
= *(const int *)xb
;
4387 unique (int *b
, int *e
)
4396 /* Given PID, iterates over all threads in that process.
4398 Information about each thread, in a format suitable for qXfer:osdata:thread
4399 is printed to BUFFER, if it's not NULL. BUFFER is assumed to be already
4400 initialized, and the caller is responsible for finishing and appending '\0'
4403 The list of cores that threads are running on is assigned to *CORES, if it
4404 is not NULL. If no cores are found, *CORES will be set to NULL. Caller
4405 should free *CORES. */
4408 list_threads (int pid
, struct buffer
*buffer
, char **cores
)
4412 int *core_numbers
= xmalloc (sizeof (int) * allocated
);
4416 struct stat statbuf
;
4418 sprintf (pathname
, "/proc/%d/task", pid
);
4419 if (stat (pathname
, &statbuf
) == 0 && S_ISDIR (statbuf
.st_mode
))
4421 dir
= opendir (pathname
);
4424 free (core_numbers
);
4428 while ((dp
= readdir (dir
)) != NULL
)
4430 unsigned long lwp
= strtoul (dp
->d_name
, NULL
, 10);
4434 unsigned core
= linux_core_of_thread (ptid_build (pid
, lwp
, 0));
4438 char s
[sizeof ("4294967295")];
4439 sprintf (s
, "%u", core
);
4441 if (count
== allocated
)
4444 core_numbers
= realloc (core_numbers
,
4445 sizeof (int) * allocated
);
4447 core_numbers
[count
++] = core
;
4449 buffer_xml_printf (buffer
,
4451 "<column name=\"pid\">%d</column>"
4452 "<column name=\"tid\">%s</column>"
4453 "<column name=\"core\">%s</column>"
4454 "</item>", pid
, dp
->d_name
, s
);
4459 buffer_xml_printf (buffer
,
4461 "<column name=\"pid\">%d</column>"
4462 "<column name=\"tid\">%s</column>"
4463 "</item>", pid
, dp
->d_name
);
4474 struct buffer buffer2
;
4477 qsort (core_numbers
, count
, sizeof (int), compare_ints
);
4479 /* Remove duplicates. */
4481 e
= unique (b
, core_numbers
+ count
);
4483 buffer_init (&buffer2
);
4485 for (b
= core_numbers
; b
!= e
; ++b
)
4487 char number
[sizeof ("4294967295")];
4488 sprintf (number
, "%u", *b
);
4489 buffer_xml_printf (&buffer2
, "%s%s",
4490 (b
== core_numbers
) ? "" : ",", number
);
4492 buffer_grow_str0 (&buffer2
, "");
4494 *cores
= buffer_finish (&buffer2
);
4497 free (core_numbers
);
4501 show_process (int pid
, const char *username
, struct buffer
*buffer
)
4505 char cmd
[MAXPATHLEN
+ 1];
4507 sprintf (pathname
, "/proc/%d/cmdline", pid
);
4509 if ((f
= fopen (pathname
, "r")) != NULL
)
4511 size_t len
= fread (cmd
, 1, sizeof (cmd
) - 1, f
);
4516 for (i
= 0; i
< len
; i
++)
4521 buffer_xml_printf (buffer
,
4523 "<column name=\"pid\">%d</column>"
4524 "<column name=\"user\">%s</column>"
4525 "<column name=\"command\">%s</column>",
4530 /* This only collects core numbers, and does not print threads. */
4531 list_threads (pid
, NULL
, &cores
);
4535 buffer_xml_printf (buffer
,
4536 "<column name=\"cores\">%s</column>", cores
);
4540 buffer_xml_printf (buffer
, "</item>");
4547 linux_qxfer_osdata (const char *annex
,
4548 unsigned char *readbuf
, unsigned const char *writebuf
,
4549 CORE_ADDR offset
, int len
)
4551 /* We make the process list snapshot when the object starts to be
4553 static const char *buf
;
4554 static long len_avail
= -1;
4555 static struct buffer buffer
;
4561 if (strcmp (annex
, "processes") == 0)
4563 else if (strcmp (annex
, "threads") == 0)
4568 if (!readbuf
|| writebuf
)
4573 if (len_avail
!= -1 && len_avail
!= 0)
4574 buffer_free (&buffer
);
4577 buffer_init (&buffer
);
4579 buffer_grow_str (&buffer
, "<osdata type=\"processes\">");
4581 buffer_grow_str (&buffer
, "<osdata type=\"threads\">");
4583 dirp
= opendir ("/proc");
4587 while ((dp
= readdir (dirp
)) != NULL
)
4589 struct stat statbuf
;
4590 char procentry
[sizeof ("/proc/4294967295")];
4592 if (!isdigit (dp
->d_name
[0])
4593 || strlen (dp
->d_name
) > sizeof ("4294967295") - 1)
4596 sprintf (procentry
, "/proc/%s", dp
->d_name
);
4597 if (stat (procentry
, &statbuf
) == 0
4598 && S_ISDIR (statbuf
.st_mode
))
4600 int pid
= (int) strtoul (dp
->d_name
, NULL
, 10);
4604 struct passwd
*entry
= getpwuid (statbuf
.st_uid
);
4605 show_process (pid
, entry
? entry
->pw_name
: "?", &buffer
);
4609 list_threads (pid
, &buffer
, NULL
);
4616 buffer_grow_str0 (&buffer
, "</osdata>\n");
4617 buf
= buffer_finish (&buffer
);
4618 len_avail
= strlen (buf
);
4621 if (offset
>= len_avail
)
4623 /* Done. Get rid of the data. */
4624 buffer_free (&buffer
);
4630 if (len
> len_avail
- offset
)
4631 len
= len_avail
- offset
;
4632 memcpy (readbuf
, buf
+ offset
, len
);
4637 /* Convert a native/host siginfo object, into/from the siginfo in the
4638 layout of the inferiors' architecture. */
4641 siginfo_fixup (struct siginfo
*siginfo
, void *inf_siginfo
, int direction
)
4645 if (the_low_target
.siginfo_fixup
!= NULL
)
4646 done
= the_low_target
.siginfo_fixup (siginfo
, inf_siginfo
, direction
);
4648 /* If there was no callback, or the callback didn't do anything,
4649 then just do a straight memcpy. */
4653 memcpy (siginfo
, inf_siginfo
, sizeof (struct siginfo
));
4655 memcpy (inf_siginfo
, siginfo
, sizeof (struct siginfo
));
4660 linux_xfer_siginfo (const char *annex
, unsigned char *readbuf
,
4661 unsigned const char *writebuf
, CORE_ADDR offset
, int len
)
4664 struct siginfo siginfo
;
4665 char inf_siginfo
[sizeof (struct siginfo
)];
4667 if (current_inferior
== NULL
)
4670 pid
= lwpid_of (get_thread_lwp (current_inferior
));
4673 fprintf (stderr
, "%s siginfo for lwp %d.\n",
4674 readbuf
!= NULL
? "Reading" : "Writing",
4677 if (offset
> sizeof (siginfo
))
4680 if (ptrace (PTRACE_GETSIGINFO
, pid
, 0, &siginfo
) != 0)
4683 /* When GDBSERVER is built as a 64-bit application, ptrace writes into
4684 SIGINFO an object with 64-bit layout. Since debugging a 32-bit
4685 inferior with a 64-bit GDBSERVER should look the same as debugging it
4686 with a 32-bit GDBSERVER, we need to convert it. */
4687 siginfo_fixup (&siginfo
, inf_siginfo
, 0);
4689 if (offset
+ len
> sizeof (siginfo
))
4690 len
= sizeof (siginfo
) - offset
;
4692 if (readbuf
!= NULL
)
4693 memcpy (readbuf
, inf_siginfo
+ offset
, len
);
4696 memcpy (inf_siginfo
+ offset
, writebuf
, len
);
4698 /* Convert back to ptrace layout before flushing it out. */
4699 siginfo_fixup (&siginfo
, inf_siginfo
, 1);
4701 if (ptrace (PTRACE_SETSIGINFO
, pid
, 0, &siginfo
) != 0)
4708 /* SIGCHLD handler that serves two purposes: In non-stop/async mode,
4709 so we notice when children change state; as the handler for the
4710 sigsuspend in my_waitpid. */
4713 sigchld_handler (int signo
)
4715 int old_errno
= errno
;
4718 /* fprintf is not async-signal-safe, so call write directly. */
4719 write (2, "sigchld_handler\n", sizeof ("sigchld_handler\n") - 1);
4721 if (target_is_async_p ())
4722 async_file_mark (); /* trigger a linux_wait */
4728 linux_supports_non_stop (void)
4734 linux_async (int enable
)
4736 int previous
= (linux_event_pipe
[0] != -1);
4739 fprintf (stderr
, "linux_async (%d), previous=%d\n",
4742 if (previous
!= enable
)
4745 sigemptyset (&mask
);
4746 sigaddset (&mask
, SIGCHLD
);
4748 sigprocmask (SIG_BLOCK
, &mask
, NULL
);
4752 if (pipe (linux_event_pipe
) == -1)
4753 fatal ("creating event pipe failed.");
4755 fcntl (linux_event_pipe
[0], F_SETFL
, O_NONBLOCK
);
4756 fcntl (linux_event_pipe
[1], F_SETFL
, O_NONBLOCK
);
4758 /* Register the event loop handler. */
4759 add_file_handler (linux_event_pipe
[0],
4760 handle_target_event
, NULL
);
4762 /* Always trigger a linux_wait. */
4767 delete_file_handler (linux_event_pipe
[0]);
4769 close (linux_event_pipe
[0]);
4770 close (linux_event_pipe
[1]);
4771 linux_event_pipe
[0] = -1;
4772 linux_event_pipe
[1] = -1;
4775 sigprocmask (SIG_UNBLOCK
, &mask
, NULL
);
4782 linux_start_non_stop (int nonstop
)
4784 /* Register or unregister from event-loop accordingly. */
4785 linux_async (nonstop
);
4790 linux_supports_multi_process (void)
4796 /* Enumerate spufs IDs for process PID. */
4798 spu_enumerate_spu_ids (long pid
, unsigned char *buf
, CORE_ADDR offset
, int len
)
4804 struct dirent
*entry
;
4806 sprintf (path
, "/proc/%ld/fd", pid
);
4807 dir
= opendir (path
);
4812 while ((entry
= readdir (dir
)) != NULL
)
4818 fd
= atoi (entry
->d_name
);
4822 sprintf (path
, "/proc/%ld/fd/%d", pid
, fd
);
4823 if (stat (path
, &st
) != 0)
4825 if (!S_ISDIR (st
.st_mode
))
4828 if (statfs (path
, &stfs
) != 0)
4830 if (stfs
.f_type
!= SPUFS_MAGIC
)
4833 if (pos
>= offset
&& pos
+ 4 <= offset
+ len
)
4835 *(unsigned int *)(buf
+ pos
- offset
) = fd
;
4845 /* Implements the to_xfer_partial interface for the TARGET_OBJECT_SPU
4846 object type, using the /proc file system. */
4848 linux_qxfer_spu (const char *annex
, unsigned char *readbuf
,
4849 unsigned const char *writebuf
,
4850 CORE_ADDR offset
, int len
)
4852 long pid
= lwpid_of (get_thread_lwp (current_inferior
));
4857 if (!writebuf
&& !readbuf
)
4865 return spu_enumerate_spu_ids (pid
, readbuf
, offset
, len
);
4868 sprintf (buf
, "/proc/%ld/fd/%s", pid
, annex
);
4869 fd
= open (buf
, writebuf
? O_WRONLY
: O_RDONLY
);
4874 && lseek (fd
, (off_t
) offset
, SEEK_SET
) != (off_t
) offset
)
4881 ret
= write (fd
, writebuf
, (size_t) len
);
4883 ret
= read (fd
, readbuf
, (size_t) len
);
4890 linux_core_of_thread (ptid_t ptid
)
4892 char filename
[sizeof ("/proc//task//stat")
4893 + 2 * 20 /* decimal digits for 2 numbers, max 2^64 bit each */
4896 char *content
= NULL
;
4899 int content_read
= 0;
4903 sprintf (filename
, "/proc/%d/task/%ld/stat",
4904 ptid_get_pid (ptid
), ptid_get_lwp (ptid
));
4905 f
= fopen (filename
, "r");
4912 content
= realloc (content
, content_read
+ 1024);
4913 n
= fread (content
+ content_read
, 1, 1024, f
);
4917 content
[content_read
] = '\0';
4922 p
= strchr (content
, '(');
4926 p
= strchr (p
, ')');
4930 /* If the first field after program name has index 0, then core number is
4931 the field with index 36. There's no constant for that anywhere. */
4933 p
= strtok_r (p
, " ", &ts
);
4934 for (i
= 0; p
!= NULL
&& i
!= 36; ++i
)
4935 p
= strtok_r (NULL
, " ", &ts
);
4937 if (p
== NULL
|| sscanf (p
, "%d", &core
) == 0)
4947 linux_process_qsupported (const char *query
)
4949 if (the_low_target
.process_qsupported
!= NULL
)
4950 the_low_target
.process_qsupported (query
);
4954 linux_supports_tracepoints (void)
4956 if (*the_low_target
.supports_tracepoints
== NULL
)
4959 return (*the_low_target
.supports_tracepoints
) ();
4963 linux_read_pc (struct regcache
*regcache
)
4965 if (the_low_target
.get_pc
== NULL
)
4968 return (*the_low_target
.get_pc
) (regcache
);
4972 linux_write_pc (struct regcache
*regcache
, CORE_ADDR pc
)
4974 gdb_assert (the_low_target
.set_pc
!= NULL
);
4976 (*the_low_target
.set_pc
) (regcache
, pc
);
4980 linux_thread_stopped (struct thread_info
*thread
)
4982 return get_thread_lwp (thread
)->stopped
;
4985 /* This exposes stop-all-threads functionality to other modules. */
4988 linux_pause_all (int freeze
)
4990 stop_all_lwps (freeze
, NULL
);
4993 /* This exposes unstop-all-threads functionality to other gdbserver
4997 linux_unpause_all (int unfreeze
)
4999 unstop_all_lwps (unfreeze
, NULL
);
5003 linux_install_fast_tracepoint_jump_pad (CORE_ADDR tpoint
, CORE_ADDR tpaddr
,
5004 CORE_ADDR collector
,
5007 CORE_ADDR
*jump_entry
,
5008 unsigned char *jjump_pad_insn
,
5009 ULONGEST
*jjump_pad_insn_size
,
5010 CORE_ADDR
*adjusted_insn_addr
,
5011 CORE_ADDR
*adjusted_insn_addr_end
)
5013 return (*the_low_target
.install_fast_tracepoint_jump_pad
)
5014 (tpoint
, tpaddr
, collector
, lockaddr
, orig_size
,
5015 jump_entry
, jjump_pad_insn
, jjump_pad_insn_size
,
5016 adjusted_insn_addr
, adjusted_insn_addr_end
);
5019 static struct emit_ops
*
5020 linux_emit_ops (void)
5022 if (the_low_target
.emit_ops
!= NULL
)
5023 return (*the_low_target
.emit_ops
) ();
5028 static struct target_ops linux_target_ops
= {
5029 linux_create_inferior
,
5038 linux_fetch_registers
,
5039 linux_store_registers
,
5042 linux_look_up_symbols
,
5043 linux_request_interrupt
,
5047 linux_stopped_by_watchpoint
,
5048 linux_stopped_data_address
,
5049 #if defined(__UCLIBC__) && defined(HAS_NOMMU)
5054 #ifdef USE_THREAD_DB
5055 thread_db_get_tls_address
,
5060 hostio_last_error_from_errno
,
5063 linux_supports_non_stop
,
5065 linux_start_non_stop
,
5066 linux_supports_multi_process
,
5067 #ifdef USE_THREAD_DB
5068 thread_db_handle_monitor_command
,
5072 linux_core_of_thread
,
5073 linux_process_qsupported
,
5074 linux_supports_tracepoints
,
5077 linux_thread_stopped
,
5081 linux_cancel_breakpoints
,
5082 linux_stabilize_threads
,
5083 linux_install_fast_tracepoint_jump_pad
,
5088 linux_init_signals ()
5090 /* FIXME drow/2002-06-09: As above, we should check with LinuxThreads
5091 to find what the cancel signal actually is. */
5092 #ifdef __SIGRTMIN /* Bionic doesn't use SIGRTMIN the way glibc does. */
5093 signal (__SIGRTMIN
+1, SIG_IGN
);
5098 initialize_low (void)
5100 struct sigaction sigchld_action
;
5101 memset (&sigchld_action
, 0, sizeof (sigchld_action
));
5102 set_target_ops (&linux_target_ops
);
5103 set_breakpoint_data (the_low_target
.breakpoint
,
5104 the_low_target
.breakpoint_len
);
5105 linux_init_signals ();
5106 linux_test_for_tracefork ();
5107 #ifdef HAVE_LINUX_REGSETS
5108 for (num_regsets
= 0; target_regsets
[num_regsets
].size
>= 0; num_regsets
++)
5110 disabled_regsets
= xmalloc (num_regsets
);
5113 sigchld_action
.sa_handler
= sigchld_handler
;
5114 sigemptyset (&sigchld_action
.sa_mask
);
5115 sigchld_action
.sa_flags
= SA_RESTART
;
5116 sigaction (SIGCHLD
, &sigchld_action
, NULL
);