frame: add frame_id_build_unavailable_stack_special
[deliverable/binutils-gdb.git] / gdb / record-full.c
1 /* Process record and replay target for GDB, the GNU debugger.
2
3 Copyright (C) 2013-2014 Free Software Foundation, Inc.
4
5 This file is part of GDB.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
19
20 #include "defs.h"
21 #include "gdbcmd.h"
22 #include "regcache.h"
23 #include "gdbthread.h"
24 #include "event-top.h"
25 #include "exceptions.h"
26 #include "completer.h"
27 #include "arch-utils.h"
28 #include "gdbcore.h"
29 #include "exec.h"
30 #include "record.h"
31 #include "record-full.h"
32 #include "elf-bfd.h"
33 #include "gcore.h"
34 #include "event-loop.h"
35 #include "inf-loop.h"
36 #include "gdb_bfd.h"
37 #include "observer.h"
38
39 #include <signal.h>
40
41 /* This module implements "target record-full", also known as "process
42 record and replay". This target sits on top of a "normal" target
43 (a target that "has execution"), and provides a record and replay
44 functionality, including reverse debugging.
45
46 Target record has two modes: recording, and replaying.
47
48 In record mode, we intercept the to_resume and to_wait methods.
49 Whenever gdb resumes the target, we run the target in single step
50 mode, and we build up an execution log in which, for each executed
51 instruction, we record all changes in memory and register state.
52 This is invisible to the user, to whom it just looks like an
53 ordinary debugging session (except for performance degredation).
54
55 In replay mode, instead of actually letting the inferior run as a
56 process, we simulate its execution by playing back the recorded
57 execution log. For each instruction in the log, we simulate the
58 instruction's side effects by duplicating the changes that it would
59 have made on memory and registers. */
60
61 #define DEFAULT_RECORD_FULL_INSN_MAX_NUM 200000
62
63 #define RECORD_FULL_IS_REPLAY \
64 (record_full_list->next || execution_direction == EXEC_REVERSE)
65
66 #define RECORD_FULL_FILE_MAGIC netorder32(0x20091016)
67
68 /* These are the core structs of the process record functionality.
69
70 A record_full_entry is a record of the value change of a register
71 ("record_full_reg") or a part of memory ("record_full_mem"). And each
72 instruction must have a struct record_full_entry ("record_full_end")
73 that indicates that this is the last struct record_full_entry of this
74 instruction.
75
76 Each struct record_full_entry is linked to "record_full_list" by "prev"
77 and "next" pointers. */
78
79 struct record_full_mem_entry
80 {
81 CORE_ADDR addr;
82 int len;
83 /* Set this flag if target memory for this entry
84 can no longer be accessed. */
85 int mem_entry_not_accessible;
86 union
87 {
88 gdb_byte *ptr;
89 gdb_byte buf[sizeof (gdb_byte *)];
90 } u;
91 };
92
93 struct record_full_reg_entry
94 {
95 unsigned short num;
96 unsigned short len;
97 union
98 {
99 gdb_byte *ptr;
100 gdb_byte buf[2 * sizeof (gdb_byte *)];
101 } u;
102 };
103
104 struct record_full_end_entry
105 {
106 enum gdb_signal sigval;
107 ULONGEST insn_num;
108 };
109
110 enum record_full_type
111 {
112 record_full_end = 0,
113 record_full_reg,
114 record_full_mem
115 };
116
117 /* This is the data structure that makes up the execution log.
118
119 The execution log consists of a single linked list of entries
120 of type "struct record_full_entry". It is doubly linked so that it
121 can be traversed in either direction.
122
123 The start of the list is anchored by a struct called
124 "record_full_first". The pointer "record_full_list" either points
125 to the last entry that was added to the list (in record mode), or to
126 the next entry in the list that will be executed (in replay mode).
127
128 Each list element (struct record_full_entry), in addition to next
129 and prev pointers, consists of a union of three entry types: mem,
130 reg, and end. A field called "type" determines which entry type is
131 represented by a given list element.
132
133 Each instruction that is added to the execution log is represented
134 by a variable number of list elements ('entries'). The instruction
135 will have one "reg" entry for each register that is changed by
136 executing the instruction (including the PC in every case). It
137 will also have one "mem" entry for each memory change. Finally,
138 each instruction will have an "end" entry that separates it from
139 the changes associated with the next instruction. */
140
141 struct record_full_entry
142 {
143 struct record_full_entry *prev;
144 struct record_full_entry *next;
145 enum record_full_type type;
146 union
147 {
148 /* reg */
149 struct record_full_reg_entry reg;
150 /* mem */
151 struct record_full_mem_entry mem;
152 /* end */
153 struct record_full_end_entry end;
154 } u;
155 };
156
157 /* If true, query if PREC cannot record memory
158 change of next instruction. */
159 int record_full_memory_query = 0;
160
161 struct record_full_core_buf_entry
162 {
163 struct record_full_core_buf_entry *prev;
164 struct target_section *p;
165 bfd_byte *buf;
166 };
167
168 /* Record buf with core target. */
169 static gdb_byte *record_full_core_regbuf = NULL;
170 static struct target_section *record_full_core_start;
171 static struct target_section *record_full_core_end;
172 static struct record_full_core_buf_entry *record_full_core_buf_list = NULL;
173
174 /* The following variables are used for managing the linked list that
175 represents the execution log.
176
177 record_full_first is the anchor that holds down the beginning of
178 the list.
179
180 record_full_list serves two functions:
181 1) In record mode, it anchors the end of the list.
182 2) In replay mode, it traverses the list and points to
183 the next instruction that must be emulated.
184
185 record_full_arch_list_head and record_full_arch_list_tail are used
186 to manage a separate list, which is used to build up the change
187 elements of the currently executing instruction during record mode.
188 When this instruction has been completely annotated in the "arch
189 list", it will be appended to the main execution log. */
190
191 static struct record_full_entry record_full_first;
192 static struct record_full_entry *record_full_list = &record_full_first;
193 static struct record_full_entry *record_full_arch_list_head = NULL;
194 static struct record_full_entry *record_full_arch_list_tail = NULL;
195
196 /* 1 ask user. 0 auto delete the last struct record_full_entry. */
197 static int record_full_stop_at_limit = 1;
198 /* Maximum allowed number of insns in execution log. */
199 static unsigned int record_full_insn_max_num
200 = DEFAULT_RECORD_FULL_INSN_MAX_NUM;
201 /* Actual count of insns presently in execution log. */
202 static unsigned int record_full_insn_num = 0;
203 /* Count of insns logged so far (may be larger
204 than count of insns presently in execution log). */
205 static ULONGEST record_full_insn_count;
206
207 /* The target_ops of process record. */
208 static struct target_ops record_full_ops;
209 static struct target_ops record_full_core_ops;
210
211 /* See record-full.h. */
212
213 int
214 record_full_is_used (void)
215 {
216 struct target_ops *t;
217
218 t = find_record_target ();
219 return (t == &record_full_ops
220 || t == &record_full_core_ops);
221 }
222
223
224 /* Command lists for "set/show record full". */
225 static struct cmd_list_element *set_record_full_cmdlist;
226 static struct cmd_list_element *show_record_full_cmdlist;
227
228 /* Command list for "record full". */
229 static struct cmd_list_element *record_full_cmdlist;
230
231 /* The beneath function pointers. */
232 static struct target_ops *record_full_beneath_to_resume_ops;
233 static void (*record_full_beneath_to_resume) (struct target_ops *, ptid_t, int,
234 enum gdb_signal);
235 static struct target_ops *record_full_beneath_to_wait_ops;
236 static ptid_t (*record_full_beneath_to_wait) (struct target_ops *, ptid_t,
237 struct target_waitstatus *,
238 int);
239 static struct target_ops *record_full_beneath_to_store_registers_ops;
240 static void (*record_full_beneath_to_store_registers) (struct target_ops *,
241 struct regcache *,
242 int regno);
243 static struct target_ops *record_full_beneath_to_xfer_partial_ops;
244 static target_xfer_partial_ftype *record_full_beneath_to_xfer_partial;
245 static int
246 (*record_full_beneath_to_insert_breakpoint) (struct gdbarch *,
247 struct bp_target_info *);
248 static int
249 (*record_full_beneath_to_remove_breakpoint) (struct gdbarch *,
250 struct bp_target_info *);
251 static int (*record_full_beneath_to_stopped_by_watchpoint) (void);
252 static int (*record_full_beneath_to_stopped_data_address) (struct target_ops *,
253 CORE_ADDR *);
254 static void
255 (*record_full_beneath_to_async) (void (*) (enum inferior_event_type, void *),
256 void *);
257
258 static void record_full_goto_insn (struct record_full_entry *entry,
259 enum exec_direction_kind dir);
260 static void record_full_save (const char *recfilename);
261
262 /* Alloc and free functions for record_full_reg, record_full_mem, and
263 record_full_end entries. */
264
265 /* Alloc a record_full_reg record entry. */
266
267 static inline struct record_full_entry *
268 record_full_reg_alloc (struct regcache *regcache, int regnum)
269 {
270 struct record_full_entry *rec;
271 struct gdbarch *gdbarch = get_regcache_arch (regcache);
272
273 rec = xcalloc (1, sizeof (struct record_full_entry));
274 rec->type = record_full_reg;
275 rec->u.reg.num = regnum;
276 rec->u.reg.len = register_size (gdbarch, regnum);
277 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
278 rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len);
279
280 return rec;
281 }
282
283 /* Free a record_full_reg record entry. */
284
285 static inline void
286 record_full_reg_release (struct record_full_entry *rec)
287 {
288 gdb_assert (rec->type == record_full_reg);
289 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
290 xfree (rec->u.reg.u.ptr);
291 xfree (rec);
292 }
293
294 /* Alloc a record_full_mem record entry. */
295
296 static inline struct record_full_entry *
297 record_full_mem_alloc (CORE_ADDR addr, int len)
298 {
299 struct record_full_entry *rec;
300
301 rec = xcalloc (1, sizeof (struct record_full_entry));
302 rec->type = record_full_mem;
303 rec->u.mem.addr = addr;
304 rec->u.mem.len = len;
305 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
306 rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len);
307
308 return rec;
309 }
310
311 /* Free a record_full_mem record entry. */
312
313 static inline void
314 record_full_mem_release (struct record_full_entry *rec)
315 {
316 gdb_assert (rec->type == record_full_mem);
317 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
318 xfree (rec->u.mem.u.ptr);
319 xfree (rec);
320 }
321
322 /* Alloc a record_full_end record entry. */
323
324 static inline struct record_full_entry *
325 record_full_end_alloc (void)
326 {
327 struct record_full_entry *rec;
328
329 rec = xcalloc (1, sizeof (struct record_full_entry));
330 rec->type = record_full_end;
331
332 return rec;
333 }
334
335 /* Free a record_full_end record entry. */
336
337 static inline void
338 record_full_end_release (struct record_full_entry *rec)
339 {
340 xfree (rec);
341 }
342
343 /* Free one record entry, any type.
344 Return entry->type, in case caller wants to know. */
345
346 static inline enum record_full_type
347 record_full_entry_release (struct record_full_entry *rec)
348 {
349 enum record_full_type type = rec->type;
350
351 switch (type) {
352 case record_full_reg:
353 record_full_reg_release (rec);
354 break;
355 case record_full_mem:
356 record_full_mem_release (rec);
357 break;
358 case record_full_end:
359 record_full_end_release (rec);
360 break;
361 }
362 return type;
363 }
364
365 /* Free all record entries in list pointed to by REC. */
366
367 static void
368 record_full_list_release (struct record_full_entry *rec)
369 {
370 if (!rec)
371 return;
372
373 while (rec->next)
374 rec = rec->next;
375
376 while (rec->prev)
377 {
378 rec = rec->prev;
379 record_full_entry_release (rec->next);
380 }
381
382 if (rec == &record_full_first)
383 {
384 record_full_insn_num = 0;
385 record_full_first.next = NULL;
386 }
387 else
388 record_full_entry_release (rec);
389 }
390
391 /* Free all record entries forward of the given list position. */
392
393 static void
394 record_full_list_release_following (struct record_full_entry *rec)
395 {
396 struct record_full_entry *tmp = rec->next;
397
398 rec->next = NULL;
399 while (tmp)
400 {
401 rec = tmp->next;
402 if (record_full_entry_release (tmp) == record_full_end)
403 {
404 record_full_insn_num--;
405 record_full_insn_count--;
406 }
407 tmp = rec;
408 }
409 }
410
411 /* Delete the first instruction from the beginning of the log, to make
412 room for adding a new instruction at the end of the log.
413
414 Note -- this function does not modify record_full_insn_num. */
415
416 static void
417 record_full_list_release_first (void)
418 {
419 struct record_full_entry *tmp;
420
421 if (!record_full_first.next)
422 return;
423
424 /* Loop until a record_full_end. */
425 while (1)
426 {
427 /* Cut record_full_first.next out of the linked list. */
428 tmp = record_full_first.next;
429 record_full_first.next = tmp->next;
430 tmp->next->prev = &record_full_first;
431
432 /* tmp is now isolated, and can be deleted. */
433 if (record_full_entry_release (tmp) == record_full_end)
434 break; /* End loop at first record_full_end. */
435
436 if (!record_full_first.next)
437 {
438 gdb_assert (record_full_insn_num == 1);
439 break; /* End loop when list is empty. */
440 }
441 }
442 }
443
444 /* Add a struct record_full_entry to record_full_arch_list. */
445
446 static void
447 record_full_arch_list_add (struct record_full_entry *rec)
448 {
449 if (record_debug > 1)
450 fprintf_unfiltered (gdb_stdlog,
451 "Process record: record_full_arch_list_add %s.\n",
452 host_address_to_string (rec));
453
454 if (record_full_arch_list_tail)
455 {
456 record_full_arch_list_tail->next = rec;
457 rec->prev = record_full_arch_list_tail;
458 record_full_arch_list_tail = rec;
459 }
460 else
461 {
462 record_full_arch_list_head = rec;
463 record_full_arch_list_tail = rec;
464 }
465 }
466
467 /* Return the value storage location of a record entry. */
468 static inline gdb_byte *
469 record_full_get_loc (struct record_full_entry *rec)
470 {
471 switch (rec->type) {
472 case record_full_mem:
473 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
474 return rec->u.mem.u.ptr;
475 else
476 return rec->u.mem.u.buf;
477 case record_full_reg:
478 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
479 return rec->u.reg.u.ptr;
480 else
481 return rec->u.reg.u.buf;
482 case record_full_end:
483 default:
484 gdb_assert_not_reached ("unexpected record_full_entry type");
485 return NULL;
486 }
487 }
488
489 /* Record the value of a register NUM to record_full_arch_list. */
490
491 int
492 record_full_arch_list_add_reg (struct regcache *regcache, int regnum)
493 {
494 struct record_full_entry *rec;
495
496 if (record_debug > 1)
497 fprintf_unfiltered (gdb_stdlog,
498 "Process record: add register num = %d to "
499 "record list.\n",
500 regnum);
501
502 rec = record_full_reg_alloc (regcache, regnum);
503
504 regcache_raw_read (regcache, regnum, record_full_get_loc (rec));
505
506 record_full_arch_list_add (rec);
507
508 return 0;
509 }
510
511 /* Record the value of a region of memory whose address is ADDR and
512 length is LEN to record_full_arch_list. */
513
514 int
515 record_full_arch_list_add_mem (CORE_ADDR addr, int len)
516 {
517 struct record_full_entry *rec;
518
519 if (record_debug > 1)
520 fprintf_unfiltered (gdb_stdlog,
521 "Process record: add mem addr = %s len = %d to "
522 "record list.\n",
523 paddress (target_gdbarch (), addr), len);
524
525 if (!addr) /* FIXME: Why? Some arch must permit it... */
526 return 0;
527
528 rec = record_full_mem_alloc (addr, len);
529
530 if (record_read_memory (target_gdbarch (), addr,
531 record_full_get_loc (rec), len))
532 {
533 record_full_mem_release (rec);
534 return -1;
535 }
536
537 record_full_arch_list_add (rec);
538
539 return 0;
540 }
541
542 /* Add a record_full_end type struct record_full_entry to
543 record_full_arch_list. */
544
545 int
546 record_full_arch_list_add_end (void)
547 {
548 struct record_full_entry *rec;
549
550 if (record_debug > 1)
551 fprintf_unfiltered (gdb_stdlog,
552 "Process record: add end to arch list.\n");
553
554 rec = record_full_end_alloc ();
555 rec->u.end.sigval = GDB_SIGNAL_0;
556 rec->u.end.insn_num = ++record_full_insn_count;
557
558 record_full_arch_list_add (rec);
559
560 return 0;
561 }
562
563 static void
564 record_full_check_insn_num (int set_terminal)
565 {
566 if (record_full_insn_num == record_full_insn_max_num)
567 {
568 /* Ask user what to do. */
569 if (record_full_stop_at_limit)
570 {
571 int q;
572
573 if (set_terminal)
574 target_terminal_ours ();
575 q = yquery (_("Do you want to auto delete previous execution "
576 "log entries when record/replay buffer becomes "
577 "full (record full stop-at-limit)?"));
578 if (set_terminal)
579 target_terminal_inferior ();
580 if (q)
581 record_full_stop_at_limit = 0;
582 else
583 error (_("Process record: stopped by user."));
584 }
585 }
586 }
587
588 static void
589 record_full_arch_list_cleanups (void *ignore)
590 {
591 record_full_list_release (record_full_arch_list_tail);
592 }
593
594 /* Before inferior step (when GDB record the running message, inferior
595 only can step), GDB will call this function to record the values to
596 record_full_list. This function will call gdbarch_process_record to
597 record the running message of inferior and set them to
598 record_full_arch_list, and add it to record_full_list. */
599
600 static int
601 record_full_message (struct regcache *regcache, enum gdb_signal signal)
602 {
603 int ret;
604 struct gdbarch *gdbarch = get_regcache_arch (regcache);
605 struct cleanup *old_cleanups
606 = make_cleanup (record_full_arch_list_cleanups, 0);
607
608 record_full_arch_list_head = NULL;
609 record_full_arch_list_tail = NULL;
610
611 /* Check record_full_insn_num. */
612 record_full_check_insn_num (1);
613
614 /* If gdb sends a signal value to target_resume,
615 save it in the 'end' field of the previous instruction.
616
617 Maybe process record should record what really happened,
618 rather than what gdb pretends has happened.
619
620 So if Linux delivered the signal to the child process during
621 the record mode, we will record it and deliver it again in
622 the replay mode.
623
624 If user says "ignore this signal" during the record mode, then
625 it will be ignored again during the replay mode (no matter if
626 the user says something different, like "deliver this signal"
627 during the replay mode).
628
629 User should understand that nothing he does during the replay
630 mode will change the behavior of the child. If he tries,
631 then that is a user error.
632
633 But we should still deliver the signal to gdb during the replay,
634 if we delivered it during the recording. Therefore we should
635 record the signal during record_full_wait, not
636 record_full_resume. */
637 if (record_full_list != &record_full_first) /* FIXME better way to check */
638 {
639 gdb_assert (record_full_list->type == record_full_end);
640 record_full_list->u.end.sigval = signal;
641 }
642
643 if (signal == GDB_SIGNAL_0
644 || !gdbarch_process_record_signal_p (gdbarch))
645 ret = gdbarch_process_record (gdbarch,
646 regcache,
647 regcache_read_pc (regcache));
648 else
649 ret = gdbarch_process_record_signal (gdbarch,
650 regcache,
651 signal);
652
653 if (ret > 0)
654 error (_("Process record: inferior program stopped."));
655 if (ret < 0)
656 error (_("Process record: failed to record execution log."));
657
658 discard_cleanups (old_cleanups);
659
660 record_full_list->next = record_full_arch_list_head;
661 record_full_arch_list_head->prev = record_full_list;
662 record_full_list = record_full_arch_list_tail;
663
664 if (record_full_insn_num == record_full_insn_max_num)
665 record_full_list_release_first ();
666 else
667 record_full_insn_num++;
668
669 return 1;
670 }
671
672 struct record_full_message_args {
673 struct regcache *regcache;
674 enum gdb_signal signal;
675 };
676
677 static int
678 record_full_message_wrapper (void *args)
679 {
680 struct record_full_message_args *record_full_args = args;
681
682 return record_full_message (record_full_args->regcache,
683 record_full_args->signal);
684 }
685
686 static int
687 record_full_message_wrapper_safe (struct regcache *regcache,
688 enum gdb_signal signal)
689 {
690 struct record_full_message_args args;
691
692 args.regcache = regcache;
693 args.signal = signal;
694
695 return catch_errors (record_full_message_wrapper, &args, NULL,
696 RETURN_MASK_ALL);
697 }
698
699 /* Set to 1 if record_full_store_registers and record_full_xfer_partial
700 doesn't need record. */
701
702 static int record_full_gdb_operation_disable = 0;
703
704 struct cleanup *
705 record_full_gdb_operation_disable_set (void)
706 {
707 struct cleanup *old_cleanups = NULL;
708
709 old_cleanups =
710 make_cleanup_restore_integer (&record_full_gdb_operation_disable);
711 record_full_gdb_operation_disable = 1;
712
713 return old_cleanups;
714 }
715
716 /* Flag set to TRUE for target_stopped_by_watchpoint. */
717 static int record_full_hw_watchpoint = 0;
718
719 /* Execute one instruction from the record log. Each instruction in
720 the log will be represented by an arbitrary sequence of register
721 entries and memory entries, followed by an 'end' entry. */
722
723 static inline void
724 record_full_exec_insn (struct regcache *regcache,
725 struct gdbarch *gdbarch,
726 struct record_full_entry *entry)
727 {
728 switch (entry->type)
729 {
730 case record_full_reg: /* reg */
731 {
732 gdb_byte reg[MAX_REGISTER_SIZE];
733
734 if (record_debug > 1)
735 fprintf_unfiltered (gdb_stdlog,
736 "Process record: record_full_reg %s to "
737 "inferior num = %d.\n",
738 host_address_to_string (entry),
739 entry->u.reg.num);
740
741 regcache_cooked_read (regcache, entry->u.reg.num, reg);
742 regcache_cooked_write (regcache, entry->u.reg.num,
743 record_full_get_loc (entry));
744 memcpy (record_full_get_loc (entry), reg, entry->u.reg.len);
745 }
746 break;
747
748 case record_full_mem: /* mem */
749 {
750 /* Nothing to do if the entry is flagged not_accessible. */
751 if (!entry->u.mem.mem_entry_not_accessible)
752 {
753 gdb_byte *mem = alloca (entry->u.mem.len);
754
755 if (record_debug > 1)
756 fprintf_unfiltered (gdb_stdlog,
757 "Process record: record_full_mem %s to "
758 "inferior addr = %s len = %d.\n",
759 host_address_to_string (entry),
760 paddress (gdbarch, entry->u.mem.addr),
761 entry->u.mem.len);
762
763 if (record_read_memory (gdbarch,
764 entry->u.mem.addr, mem, entry->u.mem.len))
765 entry->u.mem.mem_entry_not_accessible = 1;
766 else
767 {
768 if (target_write_memory (entry->u.mem.addr,
769 record_full_get_loc (entry),
770 entry->u.mem.len))
771 {
772 entry->u.mem.mem_entry_not_accessible = 1;
773 if (record_debug)
774 warning (_("Process record: error writing memory at "
775 "addr = %s len = %d."),
776 paddress (gdbarch, entry->u.mem.addr),
777 entry->u.mem.len);
778 }
779 else
780 {
781 memcpy (record_full_get_loc (entry), mem,
782 entry->u.mem.len);
783
784 /* We've changed memory --- check if a hardware
785 watchpoint should trap. Note that this
786 presently assumes the target beneath supports
787 continuable watchpoints. On non-continuable
788 watchpoints target, we'll want to check this
789 _before_ actually doing the memory change, and
790 not doing the change at all if the watchpoint
791 traps. */
792 if (hardware_watchpoint_inserted_in_range
793 (get_regcache_aspace (regcache),
794 entry->u.mem.addr, entry->u.mem.len))
795 record_full_hw_watchpoint = 1;
796 }
797 }
798 }
799 }
800 break;
801 }
802 }
803
804 static struct target_ops *tmp_to_resume_ops;
805 static void (*tmp_to_resume) (struct target_ops *, ptid_t, int,
806 enum gdb_signal);
807 static struct target_ops *tmp_to_wait_ops;
808 static ptid_t (*tmp_to_wait) (struct target_ops *, ptid_t,
809 struct target_waitstatus *,
810 int);
811 static struct target_ops *tmp_to_store_registers_ops;
812 static void (*tmp_to_store_registers) (struct target_ops *,
813 struct regcache *,
814 int regno);
815 static struct target_ops *tmp_to_xfer_partial_ops;
816 static target_xfer_partial_ftype *tmp_to_xfer_partial;
817 static int (*tmp_to_insert_breakpoint) (struct gdbarch *,
818 struct bp_target_info *);
819 static int (*tmp_to_remove_breakpoint) (struct gdbarch *,
820 struct bp_target_info *);
821 static int (*tmp_to_stopped_by_watchpoint) (void);
822 static int (*tmp_to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
823 static int (*tmp_to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
824 static void (*tmp_to_async) (void (*) (enum inferior_event_type, void *), void *);
825
826 static void record_full_restore (void);
827
828 /* Asynchronous signal handle registered as event loop source for when
829 we have pending events ready to be passed to the core. */
830
831 static struct async_event_handler *record_full_async_inferior_event_token;
832
833 static void
834 record_full_async_inferior_event_handler (gdb_client_data data)
835 {
836 inferior_event_handler (INF_REG_EVENT, NULL);
837 }
838
839 /* Open the process record target. */
840
841 static void
842 record_full_core_open_1 (char *name, int from_tty)
843 {
844 struct regcache *regcache = get_current_regcache ();
845 int regnum = gdbarch_num_regs (get_regcache_arch (regcache));
846 int i;
847
848 /* Get record_full_core_regbuf. */
849 target_fetch_registers (regcache, -1);
850 record_full_core_regbuf = xmalloc (MAX_REGISTER_SIZE * regnum);
851 for (i = 0; i < regnum; i ++)
852 regcache_raw_collect (regcache, i,
853 record_full_core_regbuf + MAX_REGISTER_SIZE * i);
854
855 /* Get record_full_core_start and record_full_core_end. */
856 if (build_section_table (core_bfd, &record_full_core_start,
857 &record_full_core_end))
858 {
859 xfree (record_full_core_regbuf);
860 record_full_core_regbuf = NULL;
861 error (_("\"%s\": Can't find sections: %s"),
862 bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ()));
863 }
864
865 push_target (&record_full_core_ops);
866 record_full_restore ();
867 }
868
869 /* "to_open" target method for 'live' processes. */
870
871 static void
872 record_full_open_1 (char *name, int from_tty)
873 {
874 if (record_debug)
875 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
876
877 /* check exec */
878 if (!target_has_execution)
879 error (_("Process record: the program is not being run."));
880 if (non_stop)
881 error (_("Process record target can't debug inferior in non-stop mode "
882 "(non-stop)."));
883
884 if (!gdbarch_process_record_p (target_gdbarch ()))
885 error (_("Process record: the current architecture doesn't support "
886 "record function."));
887
888 if (!tmp_to_resume)
889 error (_("Could not find 'to_resume' method on the target stack."));
890 if (!tmp_to_wait)
891 error (_("Could not find 'to_wait' method on the target stack."));
892 if (!tmp_to_store_registers)
893 error (_("Could not find 'to_store_registers' "
894 "method on the target stack."));
895 if (!tmp_to_insert_breakpoint)
896 error (_("Could not find 'to_insert_breakpoint' "
897 "method on the target stack."));
898 if (!tmp_to_remove_breakpoint)
899 error (_("Could not find 'to_remove_breakpoint' "
900 "method on the target stack."));
901 if (!tmp_to_stopped_by_watchpoint)
902 error (_("Could not find 'to_stopped_by_watchpoint' "
903 "method on the target stack."));
904 if (!tmp_to_stopped_data_address)
905 error (_("Could not find 'to_stopped_data_address' "
906 "method on the target stack."));
907
908 push_target (&record_full_ops);
909 }
910
911 static void record_full_init_record_breakpoints (void);
912
913 /* "to_open" target method. Open the process record target. */
914
915 static void
916 record_full_open (char *name, int from_tty)
917 {
918 struct target_ops *t;
919
920 if (record_debug)
921 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
922
923 record_preopen ();
924
925 /* Reset the tmp beneath pointers. */
926 tmp_to_resume_ops = NULL;
927 tmp_to_resume = NULL;
928 tmp_to_wait_ops = NULL;
929 tmp_to_wait = NULL;
930 tmp_to_store_registers_ops = NULL;
931 tmp_to_store_registers = NULL;
932 tmp_to_xfer_partial_ops = NULL;
933 tmp_to_xfer_partial = NULL;
934 tmp_to_insert_breakpoint = NULL;
935 tmp_to_remove_breakpoint = NULL;
936 tmp_to_stopped_by_watchpoint = NULL;
937 tmp_to_stopped_data_address = NULL;
938 tmp_to_async = NULL;
939
940 /* Set the beneath function pointers. */
941 for (t = current_target.beneath; t != NULL; t = t->beneath)
942 {
943 if (!tmp_to_resume)
944 {
945 tmp_to_resume = t->to_resume;
946 tmp_to_resume_ops = t;
947 }
948 if (!tmp_to_wait)
949 {
950 tmp_to_wait = t->to_wait;
951 tmp_to_wait_ops = t;
952 }
953 if (!tmp_to_store_registers)
954 {
955 tmp_to_store_registers = t->to_store_registers;
956 tmp_to_store_registers_ops = t;
957 }
958 if (!tmp_to_xfer_partial)
959 {
960 tmp_to_xfer_partial = t->to_xfer_partial;
961 tmp_to_xfer_partial_ops = t;
962 }
963 if (!tmp_to_insert_breakpoint)
964 tmp_to_insert_breakpoint = t->to_insert_breakpoint;
965 if (!tmp_to_remove_breakpoint)
966 tmp_to_remove_breakpoint = t->to_remove_breakpoint;
967 if (!tmp_to_stopped_by_watchpoint)
968 tmp_to_stopped_by_watchpoint = t->to_stopped_by_watchpoint;
969 if (!tmp_to_stopped_data_address)
970 tmp_to_stopped_data_address = t->to_stopped_data_address;
971 if (!tmp_to_async)
972 tmp_to_async = t->to_async;
973 }
974 if (!tmp_to_xfer_partial)
975 error (_("Could not find 'to_xfer_partial' method on the target stack."));
976
977 /* Reset */
978 record_full_insn_num = 0;
979 record_full_insn_count = 0;
980 record_full_list = &record_full_first;
981 record_full_list->next = NULL;
982
983 /* Set the tmp beneath pointers to beneath pointers. */
984 record_full_beneath_to_resume_ops = tmp_to_resume_ops;
985 record_full_beneath_to_resume = tmp_to_resume;
986 record_full_beneath_to_wait_ops = tmp_to_wait_ops;
987 record_full_beneath_to_wait = tmp_to_wait;
988 record_full_beneath_to_store_registers_ops = tmp_to_store_registers_ops;
989 record_full_beneath_to_store_registers = tmp_to_store_registers;
990 record_full_beneath_to_xfer_partial_ops = tmp_to_xfer_partial_ops;
991 record_full_beneath_to_xfer_partial = tmp_to_xfer_partial;
992 record_full_beneath_to_insert_breakpoint = tmp_to_insert_breakpoint;
993 record_full_beneath_to_remove_breakpoint = tmp_to_remove_breakpoint;
994 record_full_beneath_to_stopped_by_watchpoint = tmp_to_stopped_by_watchpoint;
995 record_full_beneath_to_stopped_data_address = tmp_to_stopped_data_address;
996 record_full_beneath_to_async = tmp_to_async;
997
998 if (core_bfd)
999 record_full_core_open_1 (name, from_tty);
1000 else
1001 record_full_open_1 (name, from_tty);
1002
1003 /* Register extra event sources in the event loop. */
1004 record_full_async_inferior_event_token
1005 = create_async_event_handler (record_full_async_inferior_event_handler,
1006 NULL);
1007
1008 record_full_init_record_breakpoints ();
1009
1010 observer_notify_record_changed (current_inferior (), 1);
1011 }
1012
1013 /* "to_close" target method. Close the process record target. */
1014
1015 static void
1016 record_full_close (void)
1017 {
1018 struct record_full_core_buf_entry *entry;
1019
1020 if (record_debug)
1021 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_close\n");
1022
1023 record_full_list_release (record_full_list);
1024
1025 /* Release record_full_core_regbuf. */
1026 if (record_full_core_regbuf)
1027 {
1028 xfree (record_full_core_regbuf);
1029 record_full_core_regbuf = NULL;
1030 }
1031
1032 /* Release record_full_core_buf_list. */
1033 if (record_full_core_buf_list)
1034 {
1035 for (entry = record_full_core_buf_list->prev; entry;
1036 entry = entry->prev)
1037 {
1038 xfree (record_full_core_buf_list);
1039 record_full_core_buf_list = entry;
1040 }
1041 record_full_core_buf_list = NULL;
1042 }
1043
1044 if (record_full_async_inferior_event_token)
1045 delete_async_event_handler (&record_full_async_inferior_event_token);
1046 }
1047
1048 static int record_full_resume_step = 0;
1049
1050 /* True if we've been resumed, and so each record_full_wait call should
1051 advance execution. If this is false, record_full_wait will return a
1052 TARGET_WAITKIND_IGNORE. */
1053 static int record_full_resumed = 0;
1054
1055 /* The execution direction of the last resume we got. This is
1056 necessary for async mode. Vis (order is not strictly accurate):
1057
1058 1. user has the global execution direction set to forward
1059 2. user does a reverse-step command
1060 3. record_full_resume is called with global execution direction
1061 temporarily switched to reverse
1062 4. GDB's execution direction is reverted back to forward
1063 5. target record notifies event loop there's an event to handle
1064 6. infrun asks the target which direction was it going, and switches
1065 the global execution direction accordingly (to reverse)
1066 7. infrun polls an event out of the record target, and handles it
1067 8. GDB goes back to the event loop, and goto #4.
1068 */
1069 static enum exec_direction_kind record_full_execution_dir = EXEC_FORWARD;
1070
1071 /* "to_resume" target method. Resume the process record target. */
1072
1073 static void
1074 record_full_resume (struct target_ops *ops, ptid_t ptid, int step,
1075 enum gdb_signal signal)
1076 {
1077 record_full_resume_step = step;
1078 record_full_resumed = 1;
1079 record_full_execution_dir = execution_direction;
1080
1081 if (!RECORD_FULL_IS_REPLAY)
1082 {
1083 struct gdbarch *gdbarch = target_thread_architecture (ptid);
1084
1085 record_full_message (get_current_regcache (), signal);
1086
1087 if (!step)
1088 {
1089 /* This is not hard single step. */
1090 if (!gdbarch_software_single_step_p (gdbarch))
1091 {
1092 /* This is a normal continue. */
1093 step = 1;
1094 }
1095 else
1096 {
1097 /* This arch support soft sigle step. */
1098 if (single_step_breakpoints_inserted ())
1099 {
1100 /* This is a soft single step. */
1101 record_full_resume_step = 1;
1102 }
1103 else
1104 {
1105 /* This is a continue.
1106 Try to insert a soft single step breakpoint. */
1107 if (!gdbarch_software_single_step (gdbarch,
1108 get_current_frame ()))
1109 {
1110 /* This system don't want use soft single step.
1111 Use hard sigle step. */
1112 step = 1;
1113 }
1114 }
1115 }
1116 }
1117
1118 /* Make sure the target beneath reports all signals. */
1119 target_pass_signals (0, NULL);
1120
1121 record_full_beneath_to_resume (record_full_beneath_to_resume_ops,
1122 ptid, step, signal);
1123 }
1124
1125 /* We are about to start executing the inferior (or simulate it),
1126 let's register it with the event loop. */
1127 if (target_can_async_p ())
1128 {
1129 target_async (inferior_event_handler, 0);
1130 /* Notify the event loop there's an event to wait for. We do
1131 most of the work in record_full_wait. */
1132 mark_async_event_handler (record_full_async_inferior_event_token);
1133 }
1134 }
1135
1136 static int record_full_get_sig = 0;
1137
1138 /* SIGINT signal handler, registered by "to_wait" method. */
1139
1140 static void
1141 record_full_sig_handler (int signo)
1142 {
1143 if (record_debug)
1144 fprintf_unfiltered (gdb_stdlog, "Process record: get a signal\n");
1145
1146 /* It will break the running inferior in replay mode. */
1147 record_full_resume_step = 1;
1148
1149 /* It will let record_full_wait set inferior status to get the signal
1150 SIGINT. */
1151 record_full_get_sig = 1;
1152 }
1153
1154 static void
1155 record_full_wait_cleanups (void *ignore)
1156 {
1157 if (execution_direction == EXEC_REVERSE)
1158 {
1159 if (record_full_list->next)
1160 record_full_list = record_full_list->next;
1161 }
1162 else
1163 record_full_list = record_full_list->prev;
1164 }
1165
1166 /* "to_wait" target method for process record target.
1167
1168 In record mode, the target is always run in singlestep mode
1169 (even when gdb says to continue). The to_wait method intercepts
1170 the stop events and determines which ones are to be passed on to
1171 gdb. Most stop events are just singlestep events that gdb is not
1172 to know about, so the to_wait method just records them and keeps
1173 singlestepping.
1174
1175 In replay mode, this function emulates the recorded execution log,
1176 one instruction at a time (forward or backward), and determines
1177 where to stop. */
1178
1179 static ptid_t
1180 record_full_wait_1 (struct target_ops *ops,
1181 ptid_t ptid, struct target_waitstatus *status,
1182 int options)
1183 {
1184 struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
1185
1186 if (record_debug)
1187 fprintf_unfiltered (gdb_stdlog,
1188 "Process record: record_full_wait "
1189 "record_full_resume_step = %d, "
1190 "record_full_resumed = %d, direction=%s\n",
1191 record_full_resume_step, record_full_resumed,
1192 record_full_execution_dir == EXEC_FORWARD
1193 ? "forward" : "reverse");
1194
1195 if (!record_full_resumed)
1196 {
1197 gdb_assert ((options & TARGET_WNOHANG) != 0);
1198
1199 /* No interesting event. */
1200 status->kind = TARGET_WAITKIND_IGNORE;
1201 return minus_one_ptid;
1202 }
1203
1204 record_full_get_sig = 0;
1205 signal (SIGINT, record_full_sig_handler);
1206
1207 if (!RECORD_FULL_IS_REPLAY && ops != &record_full_core_ops)
1208 {
1209 if (record_full_resume_step)
1210 {
1211 /* This is a single step. */
1212 return record_full_beneath_to_wait (record_full_beneath_to_wait_ops,
1213 ptid, status, options);
1214 }
1215 else
1216 {
1217 /* This is not a single step. */
1218 ptid_t ret;
1219 CORE_ADDR tmp_pc;
1220 struct gdbarch *gdbarch = target_thread_architecture (inferior_ptid);
1221
1222 while (1)
1223 {
1224 ret = record_full_beneath_to_wait
1225 (record_full_beneath_to_wait_ops, ptid, status, options);
1226 if (status->kind == TARGET_WAITKIND_IGNORE)
1227 {
1228 if (record_debug)
1229 fprintf_unfiltered (gdb_stdlog,
1230 "Process record: record_full_wait "
1231 "target beneath not done yet\n");
1232 return ret;
1233 }
1234
1235 if (single_step_breakpoints_inserted ())
1236 remove_single_step_breakpoints ();
1237
1238 if (record_full_resume_step)
1239 return ret;
1240
1241 /* Is this a SIGTRAP? */
1242 if (status->kind == TARGET_WAITKIND_STOPPED
1243 && status->value.sig == GDB_SIGNAL_TRAP)
1244 {
1245 struct regcache *regcache;
1246 struct address_space *aspace;
1247
1248 /* Yes -- this is likely our single-step finishing,
1249 but check if there's any reason the core would be
1250 interested in the event. */
1251
1252 registers_changed ();
1253 regcache = get_current_regcache ();
1254 tmp_pc = regcache_read_pc (regcache);
1255 aspace = get_regcache_aspace (regcache);
1256
1257 if (target_stopped_by_watchpoint ())
1258 {
1259 /* Always interested in watchpoints. */
1260 }
1261 else if (breakpoint_inserted_here_p (aspace, tmp_pc))
1262 {
1263 /* There is a breakpoint here. Let the core
1264 handle it. */
1265 if (software_breakpoint_inserted_here_p (aspace, tmp_pc))
1266 {
1267 struct gdbarch *gdbarch
1268 = get_regcache_arch (regcache);
1269 CORE_ADDR decr_pc_after_break
1270 = gdbarch_decr_pc_after_break (gdbarch);
1271 if (decr_pc_after_break)
1272 regcache_write_pc (regcache,
1273 tmp_pc + decr_pc_after_break);
1274 }
1275 }
1276 else
1277 {
1278 /* This is a single-step trap. Record the
1279 insn and issue another step.
1280 FIXME: this part can be a random SIGTRAP too.
1281 But GDB cannot handle it. */
1282 int step = 1;
1283
1284 if (!record_full_message_wrapper_safe (regcache,
1285 GDB_SIGNAL_0))
1286 {
1287 status->kind = TARGET_WAITKIND_STOPPED;
1288 status->value.sig = GDB_SIGNAL_0;
1289 break;
1290 }
1291
1292 if (gdbarch_software_single_step_p (gdbarch))
1293 {
1294 /* Try to insert the software single step breakpoint.
1295 If insert success, set step to 0. */
1296 set_executing (inferior_ptid, 0);
1297 reinit_frame_cache ();
1298 if (gdbarch_software_single_step (gdbarch,
1299 get_current_frame ()))
1300 step = 0;
1301 set_executing (inferior_ptid, 1);
1302 }
1303
1304 if (record_debug)
1305 fprintf_unfiltered (gdb_stdlog,
1306 "Process record: record_full_wait "
1307 "issuing one more step in the "
1308 "target beneath\n");
1309 record_full_beneath_to_resume
1310 (record_full_beneath_to_resume_ops, ptid, step,
1311 GDB_SIGNAL_0);
1312 continue;
1313 }
1314 }
1315
1316 /* The inferior is broken by a breakpoint or a signal. */
1317 break;
1318 }
1319
1320 return ret;
1321 }
1322 }
1323 else
1324 {
1325 struct regcache *regcache = get_current_regcache ();
1326 struct gdbarch *gdbarch = get_regcache_arch (regcache);
1327 struct address_space *aspace = get_regcache_aspace (regcache);
1328 int continue_flag = 1;
1329 int first_record_full_end = 1;
1330 struct cleanup *old_cleanups
1331 = make_cleanup (record_full_wait_cleanups, 0);
1332 CORE_ADDR tmp_pc;
1333
1334 record_full_hw_watchpoint = 0;
1335 status->kind = TARGET_WAITKIND_STOPPED;
1336
1337 /* Check breakpoint when forward execute. */
1338 if (execution_direction == EXEC_FORWARD)
1339 {
1340 tmp_pc = regcache_read_pc (regcache);
1341 if (breakpoint_inserted_here_p (aspace, tmp_pc))
1342 {
1343 int decr_pc_after_break = gdbarch_decr_pc_after_break (gdbarch);
1344
1345 if (record_debug)
1346 fprintf_unfiltered (gdb_stdlog,
1347 "Process record: break at %s.\n",
1348 paddress (gdbarch, tmp_pc));
1349
1350 if (decr_pc_after_break
1351 && !record_full_resume_step
1352 && software_breakpoint_inserted_here_p (aspace, tmp_pc))
1353 regcache_write_pc (regcache,
1354 tmp_pc + decr_pc_after_break);
1355 goto replay_out;
1356 }
1357 }
1358
1359 /* If GDB is in terminal_inferior mode, it will not get the signal.
1360 And in GDB replay mode, GDB doesn't need to be in terminal_inferior
1361 mode, because inferior will not executed.
1362 Then set it to terminal_ours to make GDB get the signal. */
1363 target_terminal_ours ();
1364
1365 /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
1366 instruction. */
1367 if (execution_direction == EXEC_FORWARD && record_full_list->next)
1368 record_full_list = record_full_list->next;
1369
1370 /* Loop over the record_full_list, looking for the next place to
1371 stop. */
1372 do
1373 {
1374 /* Check for beginning and end of log. */
1375 if (execution_direction == EXEC_REVERSE
1376 && record_full_list == &record_full_first)
1377 {
1378 /* Hit beginning of record log in reverse. */
1379 status->kind = TARGET_WAITKIND_NO_HISTORY;
1380 break;
1381 }
1382 if (execution_direction != EXEC_REVERSE && !record_full_list->next)
1383 {
1384 /* Hit end of record log going forward. */
1385 status->kind = TARGET_WAITKIND_NO_HISTORY;
1386 break;
1387 }
1388
1389 record_full_exec_insn (regcache, gdbarch, record_full_list);
1390
1391 if (record_full_list->type == record_full_end)
1392 {
1393 if (record_debug > 1)
1394 fprintf_unfiltered (gdb_stdlog,
1395 "Process record: record_full_end %s to "
1396 "inferior.\n",
1397 host_address_to_string (record_full_list));
1398
1399 if (first_record_full_end && execution_direction == EXEC_REVERSE)
1400 {
1401 /* When reverse excute, the first record_full_end is the
1402 part of current instruction. */
1403 first_record_full_end = 0;
1404 }
1405 else
1406 {
1407 /* In EXEC_REVERSE mode, this is the record_full_end of prev
1408 instruction.
1409 In EXEC_FORWARD mode, this is the record_full_end of
1410 current instruction. */
1411 /* step */
1412 if (record_full_resume_step)
1413 {
1414 if (record_debug > 1)
1415 fprintf_unfiltered (gdb_stdlog,
1416 "Process record: step.\n");
1417 continue_flag = 0;
1418 }
1419
1420 /* check breakpoint */
1421 tmp_pc = regcache_read_pc (regcache);
1422 if (breakpoint_inserted_here_p (aspace, tmp_pc))
1423 {
1424 int decr_pc_after_break
1425 = gdbarch_decr_pc_after_break (gdbarch);
1426
1427 if (record_debug)
1428 fprintf_unfiltered (gdb_stdlog,
1429 "Process record: break "
1430 "at %s.\n",
1431 paddress (gdbarch, tmp_pc));
1432 if (decr_pc_after_break
1433 && execution_direction == EXEC_FORWARD
1434 && !record_full_resume_step
1435 && software_breakpoint_inserted_here_p (aspace,
1436 tmp_pc))
1437 regcache_write_pc (regcache,
1438 tmp_pc + decr_pc_after_break);
1439 continue_flag = 0;
1440 }
1441
1442 if (record_full_hw_watchpoint)
1443 {
1444 if (record_debug)
1445 fprintf_unfiltered (gdb_stdlog,
1446 "Process record: hit hw "
1447 "watchpoint.\n");
1448 continue_flag = 0;
1449 }
1450 /* Check target signal */
1451 if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1452 /* FIXME: better way to check */
1453 continue_flag = 0;
1454 }
1455 }
1456
1457 if (continue_flag)
1458 {
1459 if (execution_direction == EXEC_REVERSE)
1460 {
1461 if (record_full_list->prev)
1462 record_full_list = record_full_list->prev;
1463 }
1464 else
1465 {
1466 if (record_full_list->next)
1467 record_full_list = record_full_list->next;
1468 }
1469 }
1470 }
1471 while (continue_flag);
1472
1473 replay_out:
1474 if (record_full_get_sig)
1475 status->value.sig = GDB_SIGNAL_INT;
1476 else if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1477 /* FIXME: better way to check */
1478 status->value.sig = record_full_list->u.end.sigval;
1479 else
1480 status->value.sig = GDB_SIGNAL_TRAP;
1481
1482 discard_cleanups (old_cleanups);
1483 }
1484
1485 signal (SIGINT, handle_sigint);
1486
1487 do_cleanups (set_cleanups);
1488 return inferior_ptid;
1489 }
1490
1491 static ptid_t
1492 record_full_wait (struct target_ops *ops,
1493 ptid_t ptid, struct target_waitstatus *status,
1494 int options)
1495 {
1496 ptid_t return_ptid;
1497
1498 return_ptid = record_full_wait_1 (ops, ptid, status, options);
1499 if (status->kind != TARGET_WAITKIND_IGNORE)
1500 {
1501 /* We're reporting a stop. Make sure any spurious
1502 target_wait(WNOHANG) doesn't advance the target until the
1503 core wants us resumed again. */
1504 record_full_resumed = 0;
1505 }
1506 return return_ptid;
1507 }
1508
1509 static int
1510 record_full_stopped_by_watchpoint (void)
1511 {
1512 if (RECORD_FULL_IS_REPLAY)
1513 return record_full_hw_watchpoint;
1514 else
1515 return record_full_beneath_to_stopped_by_watchpoint ();
1516 }
1517
1518 static int
1519 record_full_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
1520 {
1521 if (RECORD_FULL_IS_REPLAY)
1522 return 0;
1523 else
1524 return record_full_beneath_to_stopped_data_address (ops, addr_p);
1525 }
1526
1527 /* Record registers change (by user or by GDB) to list as an instruction. */
1528
1529 static void
1530 record_full_registers_change (struct regcache *regcache, int regnum)
1531 {
1532 /* Check record_full_insn_num. */
1533 record_full_check_insn_num (0);
1534
1535 record_full_arch_list_head = NULL;
1536 record_full_arch_list_tail = NULL;
1537
1538 if (regnum < 0)
1539 {
1540 int i;
1541
1542 for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
1543 {
1544 if (record_full_arch_list_add_reg (regcache, i))
1545 {
1546 record_full_list_release (record_full_arch_list_tail);
1547 error (_("Process record: failed to record execution log."));
1548 }
1549 }
1550 }
1551 else
1552 {
1553 if (record_full_arch_list_add_reg (regcache, regnum))
1554 {
1555 record_full_list_release (record_full_arch_list_tail);
1556 error (_("Process record: failed to record execution log."));
1557 }
1558 }
1559 if (record_full_arch_list_add_end ())
1560 {
1561 record_full_list_release (record_full_arch_list_tail);
1562 error (_("Process record: failed to record execution log."));
1563 }
1564 record_full_list->next = record_full_arch_list_head;
1565 record_full_arch_list_head->prev = record_full_list;
1566 record_full_list = record_full_arch_list_tail;
1567
1568 if (record_full_insn_num == record_full_insn_max_num)
1569 record_full_list_release_first ();
1570 else
1571 record_full_insn_num++;
1572 }
1573
1574 /* "to_store_registers" method for process record target. */
1575
1576 static void
1577 record_full_store_registers (struct target_ops *ops,
1578 struct regcache *regcache,
1579 int regno)
1580 {
1581 if (!record_full_gdb_operation_disable)
1582 {
1583 if (RECORD_FULL_IS_REPLAY)
1584 {
1585 int n;
1586
1587 /* Let user choose if he wants to write register or not. */
1588 if (regno < 0)
1589 n =
1590 query (_("Because GDB is in replay mode, changing the "
1591 "value of a register will make the execution "
1592 "log unusable from this point onward. "
1593 "Change all registers?"));
1594 else
1595 n =
1596 query (_("Because GDB is in replay mode, changing the value "
1597 "of a register will make the execution log unusable "
1598 "from this point onward. Change register %s?"),
1599 gdbarch_register_name (get_regcache_arch (regcache),
1600 regno));
1601
1602 if (!n)
1603 {
1604 /* Invalidate the value of regcache that was set in function
1605 "regcache_raw_write". */
1606 if (regno < 0)
1607 {
1608 int i;
1609
1610 for (i = 0;
1611 i < gdbarch_num_regs (get_regcache_arch (regcache));
1612 i++)
1613 regcache_invalidate (regcache, i);
1614 }
1615 else
1616 regcache_invalidate (regcache, regno);
1617
1618 error (_("Process record canceled the operation."));
1619 }
1620
1621 /* Destroy the record from here forward. */
1622 record_full_list_release_following (record_full_list);
1623 }
1624
1625 record_full_registers_change (regcache, regno);
1626 }
1627 record_full_beneath_to_store_registers
1628 (record_full_beneath_to_store_registers_ops, regcache, regno);
1629 }
1630
1631 /* "to_xfer_partial" method. Behavior is conditional on
1632 RECORD_FULL_IS_REPLAY.
1633 In replay mode, we cannot write memory unles we are willing to
1634 invalidate the record/replay log from this point forward. */
1635
1636 static LONGEST
1637 record_full_xfer_partial (struct target_ops *ops, enum target_object object,
1638 const char *annex, gdb_byte *readbuf,
1639 const gdb_byte *writebuf, ULONGEST offset,
1640 ULONGEST len)
1641 {
1642 if (!record_full_gdb_operation_disable
1643 && (object == TARGET_OBJECT_MEMORY
1644 || object == TARGET_OBJECT_RAW_MEMORY) && writebuf)
1645 {
1646 if (RECORD_FULL_IS_REPLAY)
1647 {
1648 /* Let user choose if he wants to write memory or not. */
1649 if (!query (_("Because GDB is in replay mode, writing to memory "
1650 "will make the execution log unusable from this "
1651 "point onward. Write memory at address %s?"),
1652 paddress (target_gdbarch (), offset)))
1653 error (_("Process record canceled the operation."));
1654
1655 /* Destroy the record from here forward. */
1656 record_full_list_release_following (record_full_list);
1657 }
1658
1659 /* Check record_full_insn_num */
1660 record_full_check_insn_num (0);
1661
1662 /* Record registers change to list as an instruction. */
1663 record_full_arch_list_head = NULL;
1664 record_full_arch_list_tail = NULL;
1665 if (record_full_arch_list_add_mem (offset, len))
1666 {
1667 record_full_list_release (record_full_arch_list_tail);
1668 if (record_debug)
1669 fprintf_unfiltered (gdb_stdlog,
1670 "Process record: failed to record "
1671 "execution log.");
1672 return -1;
1673 }
1674 if (record_full_arch_list_add_end ())
1675 {
1676 record_full_list_release (record_full_arch_list_tail);
1677 if (record_debug)
1678 fprintf_unfiltered (gdb_stdlog,
1679 "Process record: failed to record "
1680 "execution log.");
1681 return -1;
1682 }
1683 record_full_list->next = record_full_arch_list_head;
1684 record_full_arch_list_head->prev = record_full_list;
1685 record_full_list = record_full_arch_list_tail;
1686
1687 if (record_full_insn_num == record_full_insn_max_num)
1688 record_full_list_release_first ();
1689 else
1690 record_full_insn_num++;
1691 }
1692
1693 return record_full_beneath_to_xfer_partial
1694 (record_full_beneath_to_xfer_partial_ops, object, annex,
1695 readbuf, writebuf, offset, len);
1696 }
1697
1698 /* This structure represents a breakpoint inserted while the record
1699 target is active. We use this to know when to install/remove
1700 breakpoints in/from the target beneath. For example, a breakpoint
1701 may be inserted while recording, but removed when not replaying nor
1702 recording. In that case, the breakpoint had not been inserted on
1703 the target beneath, so we should not try to remove it there. */
1704
1705 struct record_full_breakpoint
1706 {
1707 /* The address and address space the breakpoint was set at. */
1708 struct address_space *address_space;
1709 CORE_ADDR addr;
1710
1711 /* True when the breakpoint has been also installed in the target
1712 beneath. This will be false for breakpoints set during replay or
1713 when recording. */
1714 int in_target_beneath;
1715 };
1716
1717 typedef struct record_full_breakpoint *record_full_breakpoint_p;
1718 DEF_VEC_P(record_full_breakpoint_p);
1719
1720 /* The list of breakpoints inserted while the record target is
1721 active. */
1722 VEC(record_full_breakpoint_p) *record_full_breakpoints = NULL;
1723
1724 static void
1725 record_full_sync_record_breakpoints (struct bp_location *loc, void *data)
1726 {
1727 if (loc->loc_type != bp_loc_software_breakpoint)
1728 return;
1729
1730 if (loc->inserted)
1731 {
1732 struct record_full_breakpoint *bp = XNEW (struct record_full_breakpoint);
1733
1734 bp->addr = loc->target_info.placed_address;
1735 bp->address_space = loc->target_info.placed_address_space;
1736
1737 bp->in_target_beneath = 1;
1738
1739 VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1740 }
1741 }
1742
1743 /* Sync existing breakpoints to record_full_breakpoints. */
1744
1745 static void
1746 record_full_init_record_breakpoints (void)
1747 {
1748 VEC_free (record_full_breakpoint_p, record_full_breakpoints);
1749
1750 iterate_over_bp_locations (record_full_sync_record_breakpoints);
1751 }
1752
1753 /* Behavior is conditional on RECORD_FULL_IS_REPLAY. We will not actually
1754 insert or remove breakpoints in the real target when replaying, nor
1755 when recording. */
1756
1757 static int
1758 record_full_insert_breakpoint (struct gdbarch *gdbarch,
1759 struct bp_target_info *bp_tgt)
1760 {
1761 struct record_full_breakpoint *bp;
1762 int in_target_beneath = 0;
1763
1764 if (!RECORD_FULL_IS_REPLAY)
1765 {
1766 /* When recording, we currently always single-step, so we don't
1767 really need to install regular breakpoints in the inferior.
1768 However, we do have to insert software single-step
1769 breakpoints, in case the target can't hardware step. To keep
1770 things single, we always insert. */
1771 struct cleanup *old_cleanups;
1772 int ret;
1773
1774 old_cleanups = record_full_gdb_operation_disable_set ();
1775 ret = record_full_beneath_to_insert_breakpoint (gdbarch, bp_tgt);
1776 do_cleanups (old_cleanups);
1777
1778 if (ret != 0)
1779 return ret;
1780
1781 in_target_beneath = 1;
1782 }
1783
1784 bp = XNEW (struct record_full_breakpoint);
1785 bp->addr = bp_tgt->placed_address;
1786 bp->address_space = bp_tgt->placed_address_space;
1787 bp->in_target_beneath = in_target_beneath;
1788 VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1789 return 0;
1790 }
1791
1792 /* "to_remove_breakpoint" method for process record target. */
1793
1794 static int
1795 record_full_remove_breakpoint (struct gdbarch *gdbarch,
1796 struct bp_target_info *bp_tgt)
1797 {
1798 struct record_full_breakpoint *bp;
1799 int ix;
1800
1801 for (ix = 0;
1802 VEC_iterate (record_full_breakpoint_p,
1803 record_full_breakpoints, ix, bp);
1804 ++ix)
1805 {
1806 if (bp->addr == bp_tgt->placed_address
1807 && bp->address_space == bp_tgt->placed_address_space)
1808 {
1809 if (bp->in_target_beneath)
1810 {
1811 struct cleanup *old_cleanups;
1812 int ret;
1813
1814 old_cleanups = record_full_gdb_operation_disable_set ();
1815 ret = record_full_beneath_to_remove_breakpoint (gdbarch, bp_tgt);
1816 do_cleanups (old_cleanups);
1817
1818 if (ret != 0)
1819 return ret;
1820 }
1821
1822 VEC_unordered_remove (record_full_breakpoint_p,
1823 record_full_breakpoints, ix);
1824 return 0;
1825 }
1826 }
1827
1828 gdb_assert_not_reached ("removing unknown breakpoint");
1829 }
1830
1831 /* "to_can_execute_reverse" method for process record target. */
1832
1833 static int
1834 record_full_can_execute_reverse (void)
1835 {
1836 return 1;
1837 }
1838
1839 /* "to_get_bookmark" method for process record and prec over core. */
1840
1841 static gdb_byte *
1842 record_full_get_bookmark (char *args, int from_tty)
1843 {
1844 char *ret = NULL;
1845
1846 /* Return stringified form of instruction count. */
1847 if (record_full_list && record_full_list->type == record_full_end)
1848 ret = xstrdup (pulongest (record_full_list->u.end.insn_num));
1849
1850 if (record_debug)
1851 {
1852 if (ret)
1853 fprintf_unfiltered (gdb_stdlog,
1854 "record_full_get_bookmark returns %s\n", ret);
1855 else
1856 fprintf_unfiltered (gdb_stdlog,
1857 "record_full_get_bookmark returns NULL\n");
1858 }
1859 return (gdb_byte *) ret;
1860 }
1861
1862 /* "to_goto_bookmark" method for process record and prec over core. */
1863
1864 static void
1865 record_full_goto_bookmark (gdb_byte *raw_bookmark, int from_tty)
1866 {
1867 char *bookmark = (char *) raw_bookmark;
1868
1869 if (record_debug)
1870 fprintf_unfiltered (gdb_stdlog,
1871 "record_full_goto_bookmark receives %s\n", bookmark);
1872
1873 if (bookmark[0] == '\'' || bookmark[0] == '\"')
1874 {
1875 if (bookmark[strlen (bookmark) - 1] != bookmark[0])
1876 error (_("Unbalanced quotes: %s"), bookmark);
1877
1878 /* Strip trailing quote. */
1879 bookmark[strlen (bookmark) - 1] = '\0';
1880 /* Strip leading quote. */
1881 bookmark++;
1882 /* Pass along to cmd_record_full_goto. */
1883 }
1884
1885 cmd_record_goto (bookmark, from_tty);
1886 return;
1887 }
1888
1889 static void
1890 record_full_async (void (*callback) (enum inferior_event_type event_type,
1891 void *context), void *context)
1892 {
1893 /* If we're on top of a line target (e.g., linux-nat, remote), then
1894 set it to async mode as well. Will be NULL if we're sitting on
1895 top of the core target, for "record restore". */
1896 if (record_full_beneath_to_async != NULL)
1897 record_full_beneath_to_async (callback, context);
1898 }
1899
1900 static int
1901 record_full_can_async_p (void)
1902 {
1903 /* We only enable async when the user specifically asks for it. */
1904 return target_async_permitted;
1905 }
1906
1907 static int
1908 record_full_is_async_p (void)
1909 {
1910 /* We only enable async when the user specifically asks for it. */
1911 return target_async_permitted;
1912 }
1913
1914 static enum exec_direction_kind
1915 record_full_execution_direction (void)
1916 {
1917 return record_full_execution_dir;
1918 }
1919
1920 static void
1921 record_full_info (void)
1922 {
1923 struct record_full_entry *p;
1924
1925 if (RECORD_FULL_IS_REPLAY)
1926 printf_filtered (_("Replay mode:\n"));
1927 else
1928 printf_filtered (_("Record mode:\n"));
1929
1930 /* Find entry for first actual instruction in the log. */
1931 for (p = record_full_first.next;
1932 p != NULL && p->type != record_full_end;
1933 p = p->next)
1934 ;
1935
1936 /* Do we have a log at all? */
1937 if (p != NULL && p->type == record_full_end)
1938 {
1939 /* Display instruction number for first instruction in the log. */
1940 printf_filtered (_("Lowest recorded instruction number is %s.\n"),
1941 pulongest (p->u.end.insn_num));
1942
1943 /* If in replay mode, display where we are in the log. */
1944 if (RECORD_FULL_IS_REPLAY)
1945 printf_filtered (_("Current instruction number is %s.\n"),
1946 pulongest (record_full_list->u.end.insn_num));
1947
1948 /* Display instruction number for last instruction in the log. */
1949 printf_filtered (_("Highest recorded instruction number is %s.\n"),
1950 pulongest (record_full_insn_count));
1951
1952 /* Display log count. */
1953 printf_filtered (_("Log contains %u instructions.\n"),
1954 record_full_insn_num);
1955 }
1956 else
1957 printf_filtered (_("No instructions have been logged.\n"));
1958
1959 /* Display max log size. */
1960 printf_filtered (_("Max logged instructions is %u.\n"),
1961 record_full_insn_max_num);
1962 }
1963
1964 /* The "to_record_delete" target method. */
1965
1966 static void
1967 record_full_delete (void)
1968 {
1969 record_full_list_release_following (record_full_list);
1970 }
1971
1972 /* The "to_record_is_replaying" target method. */
1973
1974 static int
1975 record_full_is_replaying (void)
1976 {
1977 return RECORD_FULL_IS_REPLAY;
1978 }
1979
1980 /* Go to a specific entry. */
1981
1982 static void
1983 record_full_goto_entry (struct record_full_entry *p)
1984 {
1985 if (p == NULL)
1986 error (_("Target insn not found."));
1987 else if (p == record_full_list)
1988 error (_("Already at target insn."));
1989 else if (p->u.end.insn_num > record_full_list->u.end.insn_num)
1990 {
1991 printf_filtered (_("Go forward to insn number %s\n"),
1992 pulongest (p->u.end.insn_num));
1993 record_full_goto_insn (p, EXEC_FORWARD);
1994 }
1995 else
1996 {
1997 printf_filtered (_("Go backward to insn number %s\n"),
1998 pulongest (p->u.end.insn_num));
1999 record_full_goto_insn (p, EXEC_REVERSE);
2000 }
2001
2002 registers_changed ();
2003 reinit_frame_cache ();
2004 print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
2005 }
2006
2007 /* The "to_goto_record_begin" target method. */
2008
2009 static void
2010 record_full_goto_begin (void)
2011 {
2012 struct record_full_entry *p = NULL;
2013
2014 for (p = &record_full_first; p != NULL; p = p->next)
2015 if (p->type == record_full_end)
2016 break;
2017
2018 record_full_goto_entry (p);
2019 }
2020
2021 /* The "to_goto_record_end" target method. */
2022
2023 static void
2024 record_full_goto_end (void)
2025 {
2026 struct record_full_entry *p = NULL;
2027
2028 for (p = record_full_list; p->next != NULL; p = p->next)
2029 ;
2030 for (; p!= NULL; p = p->prev)
2031 if (p->type == record_full_end)
2032 break;
2033
2034 record_full_goto_entry (p);
2035 }
2036
2037 /* The "to_goto_record" target method. */
2038
2039 static void
2040 record_full_goto (ULONGEST target_insn)
2041 {
2042 struct record_full_entry *p = NULL;
2043
2044 for (p = &record_full_first; p != NULL; p = p->next)
2045 if (p->type == record_full_end && p->u.end.insn_num == target_insn)
2046 break;
2047
2048 record_full_goto_entry (p);
2049 }
2050
2051 static void
2052 init_record_full_ops (void)
2053 {
2054 record_full_ops.to_shortname = "record-full";
2055 record_full_ops.to_longname = "Process record and replay target";
2056 record_full_ops.to_doc =
2057 "Log program while executing and replay execution from log.";
2058 record_full_ops.to_open = record_full_open;
2059 record_full_ops.to_close = record_full_close;
2060 record_full_ops.to_resume = record_full_resume;
2061 record_full_ops.to_wait = record_full_wait;
2062 record_full_ops.to_disconnect = record_disconnect;
2063 record_full_ops.to_detach = record_detach;
2064 record_full_ops.to_mourn_inferior = record_mourn_inferior;
2065 record_full_ops.to_kill = record_kill;
2066 record_full_ops.to_create_inferior = find_default_create_inferior;
2067 record_full_ops.to_store_registers = record_full_store_registers;
2068 record_full_ops.to_xfer_partial = record_full_xfer_partial;
2069 record_full_ops.to_insert_breakpoint = record_full_insert_breakpoint;
2070 record_full_ops.to_remove_breakpoint = record_full_remove_breakpoint;
2071 record_full_ops.to_stopped_by_watchpoint = record_full_stopped_by_watchpoint;
2072 record_full_ops.to_stopped_data_address = record_full_stopped_data_address;
2073 record_full_ops.to_can_execute_reverse = record_full_can_execute_reverse;
2074 record_full_ops.to_stratum = record_stratum;
2075 /* Add bookmark target methods. */
2076 record_full_ops.to_get_bookmark = record_full_get_bookmark;
2077 record_full_ops.to_goto_bookmark = record_full_goto_bookmark;
2078 record_full_ops.to_async = record_full_async;
2079 record_full_ops.to_can_async_p = record_full_can_async_p;
2080 record_full_ops.to_is_async_p = record_full_is_async_p;
2081 record_full_ops.to_execution_direction = record_full_execution_direction;
2082 record_full_ops.to_info_record = record_full_info;
2083 record_full_ops.to_save_record = record_full_save;
2084 record_full_ops.to_delete_record = record_full_delete;
2085 record_full_ops.to_record_is_replaying = record_full_is_replaying;
2086 record_full_ops.to_goto_record_begin = record_full_goto_begin;
2087 record_full_ops.to_goto_record_end = record_full_goto_end;
2088 record_full_ops.to_goto_record = record_full_goto;
2089 record_full_ops.to_magic = OPS_MAGIC;
2090 }
2091
2092 /* "to_resume" method for prec over corefile. */
2093
2094 static void
2095 record_full_core_resume (struct target_ops *ops, ptid_t ptid, int step,
2096 enum gdb_signal signal)
2097 {
2098 record_full_resume_step = step;
2099 record_full_resumed = 1;
2100 record_full_execution_dir = execution_direction;
2101
2102 /* We are about to start executing the inferior (or simulate it),
2103 let's register it with the event loop. */
2104 if (target_can_async_p ())
2105 {
2106 target_async (inferior_event_handler, 0);
2107
2108 /* Notify the event loop there's an event to wait for. */
2109 mark_async_event_handler (record_full_async_inferior_event_token);
2110 }
2111 }
2112
2113 /* "to_kill" method for prec over corefile. */
2114
2115 static void
2116 record_full_core_kill (struct target_ops *ops)
2117 {
2118 if (record_debug)
2119 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_core_kill\n");
2120
2121 unpush_target (&record_full_core_ops);
2122 }
2123
2124 /* "to_fetch_registers" method for prec over corefile. */
2125
2126 static void
2127 record_full_core_fetch_registers (struct target_ops *ops,
2128 struct regcache *regcache,
2129 int regno)
2130 {
2131 if (regno < 0)
2132 {
2133 int num = gdbarch_num_regs (get_regcache_arch (regcache));
2134 int i;
2135
2136 for (i = 0; i < num; i ++)
2137 regcache_raw_supply (regcache, i,
2138 record_full_core_regbuf + MAX_REGISTER_SIZE * i);
2139 }
2140 else
2141 regcache_raw_supply (regcache, regno,
2142 record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2143 }
2144
2145 /* "to_prepare_to_store" method for prec over corefile. */
2146
2147 static void
2148 record_full_core_prepare_to_store (struct regcache *regcache)
2149 {
2150 }
2151
2152 /* "to_store_registers" method for prec over corefile. */
2153
2154 static void
2155 record_full_core_store_registers (struct target_ops *ops,
2156 struct regcache *regcache,
2157 int regno)
2158 {
2159 if (record_full_gdb_operation_disable)
2160 regcache_raw_collect (regcache, regno,
2161 record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2162 else
2163 error (_("You can't do that without a process to debug."));
2164 }
2165
2166 /* "to_xfer_partial" method for prec over corefile. */
2167
2168 static LONGEST
2169 record_full_core_xfer_partial (struct target_ops *ops,
2170 enum target_object object,
2171 const char *annex, gdb_byte *readbuf,
2172 const gdb_byte *writebuf, ULONGEST offset,
2173 ULONGEST len)
2174 {
2175 if (object == TARGET_OBJECT_MEMORY)
2176 {
2177 if (record_full_gdb_operation_disable || !writebuf)
2178 {
2179 struct target_section *p;
2180
2181 for (p = record_full_core_start; p < record_full_core_end; p++)
2182 {
2183 if (offset >= p->addr)
2184 {
2185 struct record_full_core_buf_entry *entry;
2186 ULONGEST sec_offset;
2187
2188 if (offset >= p->endaddr)
2189 continue;
2190
2191 if (offset + len > p->endaddr)
2192 len = p->endaddr - offset;
2193
2194 sec_offset = offset - p->addr;
2195
2196 /* Read readbuf or write writebuf p, offset, len. */
2197 /* Check flags. */
2198 if (p->the_bfd_section->flags & SEC_CONSTRUCTOR
2199 || (p->the_bfd_section->flags & SEC_HAS_CONTENTS) == 0)
2200 {
2201 if (readbuf)
2202 memset (readbuf, 0, len);
2203 return len;
2204 }
2205 /* Get record_full_core_buf_entry. */
2206 for (entry = record_full_core_buf_list; entry;
2207 entry = entry->prev)
2208 if (entry->p == p)
2209 break;
2210 if (writebuf)
2211 {
2212 if (!entry)
2213 {
2214 /* Add a new entry. */
2215 entry = (struct record_full_core_buf_entry *)
2216 xmalloc
2217 (sizeof (struct record_full_core_buf_entry));
2218 entry->p = p;
2219 if (!bfd_malloc_and_get_section
2220 (p->the_bfd_section->owner,
2221 p->the_bfd_section,
2222 &entry->buf))
2223 {
2224 xfree (entry);
2225 return 0;
2226 }
2227 entry->prev = record_full_core_buf_list;
2228 record_full_core_buf_list = entry;
2229 }
2230
2231 memcpy (entry->buf + sec_offset, writebuf,
2232 (size_t) len);
2233 }
2234 else
2235 {
2236 if (!entry)
2237 return record_full_beneath_to_xfer_partial
2238 (record_full_beneath_to_xfer_partial_ops,
2239 object, annex, readbuf, writebuf,
2240 offset, len);
2241
2242 memcpy (readbuf, entry->buf + sec_offset,
2243 (size_t) len);
2244 }
2245
2246 return len;
2247 }
2248 }
2249
2250 return -1;
2251 }
2252 else
2253 error (_("You can't do that without a process to debug."));
2254 }
2255
2256 return record_full_beneath_to_xfer_partial
2257 (record_full_beneath_to_xfer_partial_ops, object, annex,
2258 readbuf, writebuf, offset, len);
2259 }
2260
2261 /* "to_insert_breakpoint" method for prec over corefile. */
2262
2263 static int
2264 record_full_core_insert_breakpoint (struct gdbarch *gdbarch,
2265 struct bp_target_info *bp_tgt)
2266 {
2267 return 0;
2268 }
2269
2270 /* "to_remove_breakpoint" method for prec over corefile. */
2271
2272 static int
2273 record_full_core_remove_breakpoint (struct gdbarch *gdbarch,
2274 struct bp_target_info *bp_tgt)
2275 {
2276 return 0;
2277 }
2278
2279 /* "to_has_execution" method for prec over corefile. */
2280
2281 static int
2282 record_full_core_has_execution (struct target_ops *ops, ptid_t the_ptid)
2283 {
2284 return 1;
2285 }
2286
2287 static void
2288 init_record_full_core_ops (void)
2289 {
2290 record_full_core_ops.to_shortname = "record-core";
2291 record_full_core_ops.to_longname = "Process record and replay target";
2292 record_full_core_ops.to_doc =
2293 "Log program while executing and replay execution from log.";
2294 record_full_core_ops.to_open = record_full_open;
2295 record_full_core_ops.to_close = record_full_close;
2296 record_full_core_ops.to_resume = record_full_core_resume;
2297 record_full_core_ops.to_wait = record_full_wait;
2298 record_full_core_ops.to_kill = record_full_core_kill;
2299 record_full_core_ops.to_fetch_registers = record_full_core_fetch_registers;
2300 record_full_core_ops.to_prepare_to_store = record_full_core_prepare_to_store;
2301 record_full_core_ops.to_store_registers = record_full_core_store_registers;
2302 record_full_core_ops.to_xfer_partial = record_full_core_xfer_partial;
2303 record_full_core_ops.to_insert_breakpoint
2304 = record_full_core_insert_breakpoint;
2305 record_full_core_ops.to_remove_breakpoint
2306 = record_full_core_remove_breakpoint;
2307 record_full_core_ops.to_stopped_by_watchpoint
2308 = record_full_stopped_by_watchpoint;
2309 record_full_core_ops.to_stopped_data_address
2310 = record_full_stopped_data_address;
2311 record_full_core_ops.to_can_execute_reverse
2312 = record_full_can_execute_reverse;
2313 record_full_core_ops.to_has_execution = record_full_core_has_execution;
2314 record_full_core_ops.to_stratum = record_stratum;
2315 /* Add bookmark target methods. */
2316 record_full_core_ops.to_get_bookmark = record_full_get_bookmark;
2317 record_full_core_ops.to_goto_bookmark = record_full_goto_bookmark;
2318 record_full_core_ops.to_async = record_full_async;
2319 record_full_core_ops.to_can_async_p = record_full_can_async_p;
2320 record_full_core_ops.to_is_async_p = record_full_is_async_p;
2321 record_full_core_ops.to_execution_direction
2322 = record_full_execution_direction;
2323 record_full_core_ops.to_info_record = record_full_info;
2324 record_full_core_ops.to_delete_record = record_full_delete;
2325 record_full_core_ops.to_record_is_replaying = record_full_is_replaying;
2326 record_full_core_ops.to_goto_record_begin = record_full_goto_begin;
2327 record_full_core_ops.to_goto_record_end = record_full_goto_end;
2328 record_full_core_ops.to_goto_record = record_full_goto;
2329 record_full_core_ops.to_magic = OPS_MAGIC;
2330 }
2331
2332 /* Record log save-file format
2333 Version 1 (never released)
2334
2335 Header:
2336 4 bytes: magic number htonl(0x20090829).
2337 NOTE: be sure to change whenever this file format changes!
2338
2339 Records:
2340 record_full_end:
2341 1 byte: record type (record_full_end, see enum record_full_type).
2342 record_full_reg:
2343 1 byte: record type (record_full_reg, see enum record_full_type).
2344 8 bytes: register id (network byte order).
2345 MAX_REGISTER_SIZE bytes: register value.
2346 record_full_mem:
2347 1 byte: record type (record_full_mem, see enum record_full_type).
2348 8 bytes: memory length (network byte order).
2349 8 bytes: memory address (network byte order).
2350 n bytes: memory value (n == memory length).
2351
2352 Version 2
2353 4 bytes: magic number netorder32(0x20091016).
2354 NOTE: be sure to change whenever this file format changes!
2355
2356 Records:
2357 record_full_end:
2358 1 byte: record type (record_full_end, see enum record_full_type).
2359 4 bytes: signal
2360 4 bytes: instruction count
2361 record_full_reg:
2362 1 byte: record type (record_full_reg, see enum record_full_type).
2363 4 bytes: register id (network byte order).
2364 n bytes: register value (n == actual register size).
2365 (eg. 4 bytes for x86 general registers).
2366 record_full_mem:
2367 1 byte: record type (record_full_mem, see enum record_full_type).
2368 4 bytes: memory length (network byte order).
2369 8 bytes: memory address (network byte order).
2370 n bytes: memory value (n == memory length).
2371
2372 */
2373
2374 /* bfdcore_read -- read bytes from a core file section. */
2375
2376 static inline void
2377 bfdcore_read (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2378 {
2379 int ret = bfd_get_section_contents (obfd, osec, buf, *offset, len);
2380
2381 if (ret)
2382 *offset += len;
2383 else
2384 error (_("Failed to read %d bytes from core file %s ('%s')."),
2385 len, bfd_get_filename (obfd),
2386 bfd_errmsg (bfd_get_error ()));
2387 }
2388
2389 static inline uint64_t
2390 netorder64 (uint64_t input)
2391 {
2392 uint64_t ret;
2393
2394 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2395 BFD_ENDIAN_BIG, input);
2396 return ret;
2397 }
2398
2399 static inline uint32_t
2400 netorder32 (uint32_t input)
2401 {
2402 uint32_t ret;
2403
2404 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2405 BFD_ENDIAN_BIG, input);
2406 return ret;
2407 }
2408
2409 static inline uint16_t
2410 netorder16 (uint16_t input)
2411 {
2412 uint16_t ret;
2413
2414 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2415 BFD_ENDIAN_BIG, input);
2416 return ret;
2417 }
2418
2419 /* Restore the execution log from a core_bfd file. */
2420 static void
2421 record_full_restore (void)
2422 {
2423 uint32_t magic;
2424 struct cleanup *old_cleanups;
2425 struct record_full_entry *rec;
2426 asection *osec;
2427 uint32_t osec_size;
2428 int bfd_offset = 0;
2429 struct regcache *regcache;
2430
2431 /* We restore the execution log from the open core bfd,
2432 if there is one. */
2433 if (core_bfd == NULL)
2434 return;
2435
2436 /* "record_full_restore" can only be called when record list is empty. */
2437 gdb_assert (record_full_first.next == NULL);
2438
2439 if (record_debug)
2440 fprintf_unfiltered (gdb_stdlog, "Restoring recording from core file.\n");
2441
2442 /* Now need to find our special note section. */
2443 osec = bfd_get_section_by_name (core_bfd, "null0");
2444 if (record_debug)
2445 fprintf_unfiltered (gdb_stdlog, "Find precord section %s.\n",
2446 osec ? "succeeded" : "failed");
2447 if (osec == NULL)
2448 return;
2449 osec_size = bfd_section_size (core_bfd, osec);
2450 if (record_debug)
2451 fprintf_unfiltered (gdb_stdlog, "%s", bfd_section_name (core_bfd, osec));
2452
2453 /* Check the magic code. */
2454 bfdcore_read (core_bfd, osec, &magic, sizeof (magic), &bfd_offset);
2455 if (magic != RECORD_FULL_FILE_MAGIC)
2456 error (_("Version mis-match or file format error in core file %s."),
2457 bfd_get_filename (core_bfd));
2458 if (record_debug)
2459 fprintf_unfiltered (gdb_stdlog,
2460 " Reading 4-byte magic cookie "
2461 "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2462 phex_nz (netorder32 (magic), 4));
2463
2464 /* Restore the entries in recfd into record_full_arch_list_head and
2465 record_full_arch_list_tail. */
2466 record_full_arch_list_head = NULL;
2467 record_full_arch_list_tail = NULL;
2468 record_full_insn_num = 0;
2469 old_cleanups = make_cleanup (record_full_arch_list_cleanups, 0);
2470 regcache = get_current_regcache ();
2471
2472 while (1)
2473 {
2474 uint8_t rectype;
2475 uint32_t regnum, len, signal, count;
2476 uint64_t addr;
2477
2478 /* We are finished when offset reaches osec_size. */
2479 if (bfd_offset >= osec_size)
2480 break;
2481 bfdcore_read (core_bfd, osec, &rectype, sizeof (rectype), &bfd_offset);
2482
2483 switch (rectype)
2484 {
2485 case record_full_reg: /* reg */
2486 /* Get register number to regnum. */
2487 bfdcore_read (core_bfd, osec, &regnum,
2488 sizeof (regnum), &bfd_offset);
2489 regnum = netorder32 (regnum);
2490
2491 rec = record_full_reg_alloc (regcache, regnum);
2492
2493 /* Get val. */
2494 bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2495 rec->u.reg.len, &bfd_offset);
2496
2497 if (record_debug)
2498 fprintf_unfiltered (gdb_stdlog,
2499 " Reading register %d (1 "
2500 "plus %lu plus %d bytes)\n",
2501 rec->u.reg.num,
2502 (unsigned long) sizeof (regnum),
2503 rec->u.reg.len);
2504 break;
2505
2506 case record_full_mem: /* mem */
2507 /* Get len. */
2508 bfdcore_read (core_bfd, osec, &len,
2509 sizeof (len), &bfd_offset);
2510 len = netorder32 (len);
2511
2512 /* Get addr. */
2513 bfdcore_read (core_bfd, osec, &addr,
2514 sizeof (addr), &bfd_offset);
2515 addr = netorder64 (addr);
2516
2517 rec = record_full_mem_alloc (addr, len);
2518
2519 /* Get val. */
2520 bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2521 rec->u.mem.len, &bfd_offset);
2522
2523 if (record_debug)
2524 fprintf_unfiltered (gdb_stdlog,
2525 " Reading memory %s (1 plus "
2526 "%lu plus %lu plus %d bytes)\n",
2527 paddress (get_current_arch (),
2528 rec->u.mem.addr),
2529 (unsigned long) sizeof (addr),
2530 (unsigned long) sizeof (len),
2531 rec->u.mem.len);
2532 break;
2533
2534 case record_full_end: /* end */
2535 rec = record_full_end_alloc ();
2536 record_full_insn_num ++;
2537
2538 /* Get signal value. */
2539 bfdcore_read (core_bfd, osec, &signal,
2540 sizeof (signal), &bfd_offset);
2541 signal = netorder32 (signal);
2542 rec->u.end.sigval = signal;
2543
2544 /* Get insn count. */
2545 bfdcore_read (core_bfd, osec, &count,
2546 sizeof (count), &bfd_offset);
2547 count = netorder32 (count);
2548 rec->u.end.insn_num = count;
2549 record_full_insn_count = count + 1;
2550 if (record_debug)
2551 fprintf_unfiltered (gdb_stdlog,
2552 " Reading record_full_end (1 + "
2553 "%lu + %lu bytes), offset == %s\n",
2554 (unsigned long) sizeof (signal),
2555 (unsigned long) sizeof (count),
2556 paddress (get_current_arch (),
2557 bfd_offset));
2558 break;
2559
2560 default:
2561 error (_("Bad entry type in core file %s."),
2562 bfd_get_filename (core_bfd));
2563 break;
2564 }
2565
2566 /* Add rec to record arch list. */
2567 record_full_arch_list_add (rec);
2568 }
2569
2570 discard_cleanups (old_cleanups);
2571
2572 /* Add record_full_arch_list_head to the end of record list. */
2573 record_full_first.next = record_full_arch_list_head;
2574 record_full_arch_list_head->prev = &record_full_first;
2575 record_full_arch_list_tail->next = NULL;
2576 record_full_list = &record_full_first;
2577
2578 /* Update record_full_insn_max_num. */
2579 if (record_full_insn_num > record_full_insn_max_num)
2580 {
2581 record_full_insn_max_num = record_full_insn_num;
2582 warning (_("Auto increase record/replay buffer limit to %u."),
2583 record_full_insn_max_num);
2584 }
2585
2586 /* Succeeded. */
2587 printf_filtered (_("Restored records from core file %s.\n"),
2588 bfd_get_filename (core_bfd));
2589
2590 print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
2591 }
2592
2593 /* bfdcore_write -- write bytes into a core file section. */
2594
2595 static inline void
2596 bfdcore_write (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2597 {
2598 int ret = bfd_set_section_contents (obfd, osec, buf, *offset, len);
2599
2600 if (ret)
2601 *offset += len;
2602 else
2603 error (_("Failed to write %d bytes to core file %s ('%s')."),
2604 len, bfd_get_filename (obfd),
2605 bfd_errmsg (bfd_get_error ()));
2606 }
2607
2608 /* Restore the execution log from a file. We use a modified elf
2609 corefile format, with an extra section for our data. */
2610
2611 static void
2612 cmd_record_full_restore (char *args, int from_tty)
2613 {
2614 core_file_command (args, from_tty);
2615 record_full_open (args, from_tty);
2616 }
2617
2618 static void
2619 record_full_save_cleanups (void *data)
2620 {
2621 bfd *obfd = data;
2622 char *pathname = xstrdup (bfd_get_filename (obfd));
2623
2624 gdb_bfd_unref (obfd);
2625 unlink (pathname);
2626 xfree (pathname);
2627 }
2628
2629 /* Save the execution log to a file. We use a modified elf corefile
2630 format, with an extra section for our data. */
2631
2632 static void
2633 record_full_save (const char *recfilename)
2634 {
2635 struct record_full_entry *cur_record_full_list;
2636 uint32_t magic;
2637 struct regcache *regcache;
2638 struct gdbarch *gdbarch;
2639 struct cleanup *old_cleanups;
2640 struct cleanup *set_cleanups;
2641 bfd *obfd;
2642 int save_size = 0;
2643 asection *osec = NULL;
2644 int bfd_offset = 0;
2645
2646 /* Open the save file. */
2647 if (record_debug)
2648 fprintf_unfiltered (gdb_stdlog, "Saving execution log to core file '%s'\n",
2649 recfilename);
2650
2651 /* Open the output file. */
2652 obfd = create_gcore_bfd (recfilename);
2653 old_cleanups = make_cleanup (record_full_save_cleanups, obfd);
2654
2655 /* Save the current record entry to "cur_record_full_list". */
2656 cur_record_full_list = record_full_list;
2657
2658 /* Get the values of regcache and gdbarch. */
2659 regcache = get_current_regcache ();
2660 gdbarch = get_regcache_arch (regcache);
2661
2662 /* Disable the GDB operation record. */
2663 set_cleanups = record_full_gdb_operation_disable_set ();
2664
2665 /* Reverse execute to the begin of record list. */
2666 while (1)
2667 {
2668 /* Check for beginning and end of log. */
2669 if (record_full_list == &record_full_first)
2670 break;
2671
2672 record_full_exec_insn (regcache, gdbarch, record_full_list);
2673
2674 if (record_full_list->prev)
2675 record_full_list = record_full_list->prev;
2676 }
2677
2678 /* Compute the size needed for the extra bfd section. */
2679 save_size = 4; /* magic cookie */
2680 for (record_full_list = record_full_first.next; record_full_list;
2681 record_full_list = record_full_list->next)
2682 switch (record_full_list->type)
2683 {
2684 case record_full_end:
2685 save_size += 1 + 4 + 4;
2686 break;
2687 case record_full_reg:
2688 save_size += 1 + 4 + record_full_list->u.reg.len;
2689 break;
2690 case record_full_mem:
2691 save_size += 1 + 4 + 8 + record_full_list->u.mem.len;
2692 break;
2693 }
2694
2695 /* Make the new bfd section. */
2696 osec = bfd_make_section_anyway_with_flags (obfd, "precord",
2697 SEC_HAS_CONTENTS
2698 | SEC_READONLY);
2699 if (osec == NULL)
2700 error (_("Failed to create 'precord' section for corefile %s: %s"),
2701 recfilename,
2702 bfd_errmsg (bfd_get_error ()));
2703 bfd_set_section_size (obfd, osec, save_size);
2704 bfd_set_section_vma (obfd, osec, 0);
2705 bfd_set_section_alignment (obfd, osec, 0);
2706 bfd_section_lma (obfd, osec) = 0;
2707
2708 /* Save corefile state. */
2709 write_gcore_file (obfd);
2710
2711 /* Write out the record log. */
2712 /* Write the magic code. */
2713 magic = RECORD_FULL_FILE_MAGIC;
2714 if (record_debug)
2715 fprintf_unfiltered (gdb_stdlog,
2716 " Writing 4-byte magic cookie "
2717 "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2718 phex_nz (magic, 4));
2719 bfdcore_write (obfd, osec, &magic, sizeof (magic), &bfd_offset);
2720
2721 /* Save the entries to recfd and forward execute to the end of
2722 record list. */
2723 record_full_list = &record_full_first;
2724 while (1)
2725 {
2726 /* Save entry. */
2727 if (record_full_list != &record_full_first)
2728 {
2729 uint8_t type;
2730 uint32_t regnum, len, signal, count;
2731 uint64_t addr;
2732
2733 type = record_full_list->type;
2734 bfdcore_write (obfd, osec, &type, sizeof (type), &bfd_offset);
2735
2736 switch (record_full_list->type)
2737 {
2738 case record_full_reg: /* reg */
2739 if (record_debug)
2740 fprintf_unfiltered (gdb_stdlog,
2741 " Writing register %d (1 "
2742 "plus %lu plus %d bytes)\n",
2743 record_full_list->u.reg.num,
2744 (unsigned long) sizeof (regnum),
2745 record_full_list->u.reg.len);
2746
2747 /* Write regnum. */
2748 regnum = netorder32 (record_full_list->u.reg.num);
2749 bfdcore_write (obfd, osec, &regnum,
2750 sizeof (regnum), &bfd_offset);
2751
2752 /* Write regval. */
2753 bfdcore_write (obfd, osec,
2754 record_full_get_loc (record_full_list),
2755 record_full_list->u.reg.len, &bfd_offset);
2756 break;
2757
2758 case record_full_mem: /* mem */
2759 if (record_debug)
2760 fprintf_unfiltered (gdb_stdlog,
2761 " Writing memory %s (1 plus "
2762 "%lu plus %lu plus %d bytes)\n",
2763 paddress (gdbarch,
2764 record_full_list->u.mem.addr),
2765 (unsigned long) sizeof (addr),
2766 (unsigned long) sizeof (len),
2767 record_full_list->u.mem.len);
2768
2769 /* Write memlen. */
2770 len = netorder32 (record_full_list->u.mem.len);
2771 bfdcore_write (obfd, osec, &len, sizeof (len), &bfd_offset);
2772
2773 /* Write memaddr. */
2774 addr = netorder64 (record_full_list->u.mem.addr);
2775 bfdcore_write (obfd, osec, &addr,
2776 sizeof (addr), &bfd_offset);
2777
2778 /* Write memval. */
2779 bfdcore_write (obfd, osec,
2780 record_full_get_loc (record_full_list),
2781 record_full_list->u.mem.len, &bfd_offset);
2782 break;
2783
2784 case record_full_end:
2785 if (record_debug)
2786 fprintf_unfiltered (gdb_stdlog,
2787 " Writing record_full_end (1 + "
2788 "%lu + %lu bytes)\n",
2789 (unsigned long) sizeof (signal),
2790 (unsigned long) sizeof (count));
2791 /* Write signal value. */
2792 signal = netorder32 (record_full_list->u.end.sigval);
2793 bfdcore_write (obfd, osec, &signal,
2794 sizeof (signal), &bfd_offset);
2795
2796 /* Write insn count. */
2797 count = netorder32 (record_full_list->u.end.insn_num);
2798 bfdcore_write (obfd, osec, &count,
2799 sizeof (count), &bfd_offset);
2800 break;
2801 }
2802 }
2803
2804 /* Execute entry. */
2805 record_full_exec_insn (regcache, gdbarch, record_full_list);
2806
2807 if (record_full_list->next)
2808 record_full_list = record_full_list->next;
2809 else
2810 break;
2811 }
2812
2813 /* Reverse execute to cur_record_full_list. */
2814 while (1)
2815 {
2816 /* Check for beginning and end of log. */
2817 if (record_full_list == cur_record_full_list)
2818 break;
2819
2820 record_full_exec_insn (regcache, gdbarch, record_full_list);
2821
2822 if (record_full_list->prev)
2823 record_full_list = record_full_list->prev;
2824 }
2825
2826 do_cleanups (set_cleanups);
2827 gdb_bfd_unref (obfd);
2828 discard_cleanups (old_cleanups);
2829
2830 /* Succeeded. */
2831 printf_filtered (_("Saved core file %s with execution log.\n"),
2832 recfilename);
2833 }
2834
2835 /* record_full_goto_insn -- rewind the record log (forward or backward,
2836 depending on DIR) to the given entry, changing the program state
2837 correspondingly. */
2838
2839 static void
2840 record_full_goto_insn (struct record_full_entry *entry,
2841 enum exec_direction_kind dir)
2842 {
2843 struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
2844 struct regcache *regcache = get_current_regcache ();
2845 struct gdbarch *gdbarch = get_regcache_arch (regcache);
2846
2847 /* Assume everything is valid: we will hit the entry,
2848 and we will not hit the end of the recording. */
2849
2850 if (dir == EXEC_FORWARD)
2851 record_full_list = record_full_list->next;
2852
2853 do
2854 {
2855 record_full_exec_insn (regcache, gdbarch, record_full_list);
2856 if (dir == EXEC_REVERSE)
2857 record_full_list = record_full_list->prev;
2858 else
2859 record_full_list = record_full_list->next;
2860 } while (record_full_list != entry);
2861 do_cleanups (set_cleanups);
2862 }
2863
2864 /* Alias for "target record-full". */
2865
2866 static void
2867 cmd_record_full_start (char *args, int from_tty)
2868 {
2869 execute_command ("target record-full", from_tty);
2870 }
2871
2872 static void
2873 set_record_full_insn_max_num (char *args, int from_tty,
2874 struct cmd_list_element *c)
2875 {
2876 if (record_full_insn_num > record_full_insn_max_num)
2877 {
2878 /* Count down record_full_insn_num while releasing records from list. */
2879 while (record_full_insn_num > record_full_insn_max_num)
2880 {
2881 record_full_list_release_first ();
2882 record_full_insn_num--;
2883 }
2884 }
2885 }
2886
2887 /* The "set record full" command. */
2888
2889 static void
2890 set_record_full_command (char *args, int from_tty)
2891 {
2892 printf_unfiltered (_("\"set record full\" must be followed "
2893 "by an apporpriate subcommand.\n"));
2894 help_list (set_record_full_cmdlist, "set record full ", all_commands,
2895 gdb_stdout);
2896 }
2897
2898 /* The "show record full" command. */
2899
2900 static void
2901 show_record_full_command (char *args, int from_tty)
2902 {
2903 cmd_show_list (show_record_full_cmdlist, from_tty, "");
2904 }
2905
2906 /* Provide a prototype to silence -Wmissing-prototypes. */
2907 extern initialize_file_ftype _initialize_record_full;
2908
2909 void
2910 _initialize_record_full (void)
2911 {
2912 struct cmd_list_element *c;
2913
2914 /* Init record_full_first. */
2915 record_full_first.prev = NULL;
2916 record_full_first.next = NULL;
2917 record_full_first.type = record_full_end;
2918
2919 init_record_full_ops ();
2920 add_target (&record_full_ops);
2921 add_deprecated_target_alias (&record_full_ops, "record");
2922 init_record_full_core_ops ();
2923 add_target (&record_full_core_ops);
2924
2925 add_prefix_cmd ("full", class_obscure, cmd_record_full_start,
2926 _("Start full execution recording."), &record_full_cmdlist,
2927 "record full ", 0, &record_cmdlist);
2928
2929 c = add_cmd ("restore", class_obscure, cmd_record_full_restore,
2930 _("Restore the execution log from a file.\n\
2931 Argument is filename. File must be created with 'record save'."),
2932 &record_full_cmdlist);
2933 set_cmd_completer (c, filename_completer);
2934
2935 /* Deprecate the old version without "full" prefix. */
2936 c = add_alias_cmd ("restore", "full restore", class_obscure, 1,
2937 &record_cmdlist);
2938 set_cmd_completer (c, filename_completer);
2939 deprecate_cmd (c, "record full restore");
2940
2941 add_prefix_cmd ("full", class_support, set_record_full_command,
2942 _("Set record options"), &set_record_full_cmdlist,
2943 "set record full ", 0, &set_record_cmdlist);
2944
2945 add_prefix_cmd ("full", class_support, show_record_full_command,
2946 _("Show record options"), &show_record_full_cmdlist,
2947 "show record full ", 0, &show_record_cmdlist);
2948
2949 /* Record instructions number limit command. */
2950 add_setshow_boolean_cmd ("stop-at-limit", no_class,
2951 &record_full_stop_at_limit, _("\
2952 Set whether record/replay stops when record/replay buffer becomes full."), _("\
2953 Show whether record/replay stops when record/replay buffer becomes full."),
2954 _("Default is ON.\n\
2955 When ON, if the record/replay buffer becomes full, ask user what to do.\n\
2956 When OFF, if the record/replay buffer becomes full,\n\
2957 delete the oldest recorded instruction to make room for each new one."),
2958 NULL, NULL,
2959 &set_record_full_cmdlist, &show_record_full_cmdlist);
2960
2961 c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2962 &set_record_cmdlist);
2963 deprecate_cmd (c, "set record full stop-at-limit");
2964
2965 c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2966 &show_record_cmdlist);
2967 deprecate_cmd (c, "show record full stop-at-limit");
2968
2969 add_setshow_uinteger_cmd ("insn-number-max", no_class,
2970 &record_full_insn_max_num,
2971 _("Set record/replay buffer limit."),
2972 _("Show record/replay buffer limit."), _("\
2973 Set the maximum number of instructions to be stored in the\n\
2974 record/replay buffer. A value of either \"unlimited\" or zero means no\n\
2975 limit. Default is 200000."),
2976 set_record_full_insn_max_num,
2977 NULL, &set_record_full_cmdlist,
2978 &show_record_full_cmdlist);
2979
2980 c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2981 &set_record_cmdlist);
2982 deprecate_cmd (c, "set record full insn-number-max");
2983
2984 c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2985 &show_record_cmdlist);
2986 deprecate_cmd (c, "show record full insn-number-max");
2987
2988 add_setshow_boolean_cmd ("memory-query", no_class,
2989 &record_full_memory_query, _("\
2990 Set whether query if PREC cannot record memory change of next instruction."),
2991 _("\
2992 Show whether query if PREC cannot record memory change of next instruction."),
2993 _("\
2994 Default is OFF.\n\
2995 When ON, query if PREC cannot record memory change of next instruction."),
2996 NULL, NULL,
2997 &set_record_full_cmdlist,
2998 &show_record_full_cmdlist);
2999
3000 c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
3001 &set_record_cmdlist);
3002 deprecate_cmd (c, "set record full memory-query");
3003
3004 c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
3005 &show_record_cmdlist);
3006 deprecate_cmd (c, "show record full memory-query");
3007 }
This page took 0.090803 seconds and 4 git commands to generate.