move sparc-sol-thread.c back into sol-thread.c.
[deliverable/binutils-gdb.git] / gdb / record-full.c
1 /* Process record and replay target for GDB, the GNU debugger.
2
3 Copyright (C) 2013 Free Software Foundation, Inc.
4
5 This file is part of GDB.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
19
20 #include "defs.h"
21 #include "gdbcmd.h"
22 #include "regcache.h"
23 #include "gdbthread.h"
24 #include "event-top.h"
25 #include "exceptions.h"
26 #include "completer.h"
27 #include "arch-utils.h"
28 #include "gdbcore.h"
29 #include "exec.h"
30 #include "record.h"
31 #include "record-full.h"
32 #include "elf-bfd.h"
33 #include "gcore.h"
34 #include "event-loop.h"
35 #include "inf-loop.h"
36 #include "gdb_bfd.h"
37 #include "observer.h"
38
39 #include <signal.h>
40
41 /* This module implements "target record-full", also known as "process
42 record and replay". This target sits on top of a "normal" target
43 (a target that "has execution"), and provides a record and replay
44 functionality, including reverse debugging.
45
46 Target record has two modes: recording, and replaying.
47
48 In record mode, we intercept the to_resume and to_wait methods.
49 Whenever gdb resumes the target, we run the target in single step
50 mode, and we build up an execution log in which, for each executed
51 instruction, we record all changes in memory and register state.
52 This is invisible to the user, to whom it just looks like an
53 ordinary debugging session (except for performance degredation).
54
55 In replay mode, instead of actually letting the inferior run as a
56 process, we simulate its execution by playing back the recorded
57 execution log. For each instruction in the log, we simulate the
58 instruction's side effects by duplicating the changes that it would
59 have made on memory and registers. */
60
61 #define DEFAULT_RECORD_FULL_INSN_MAX_NUM 200000
62
63 #define RECORD_FULL_IS_REPLAY \
64 (record_full_list->next || execution_direction == EXEC_REVERSE)
65
66 #define RECORD_FULL_FILE_MAGIC netorder32(0x20091016)
67
68 /* These are the core structs of the process record functionality.
69
70 A record_full_entry is a record of the value change of a register
71 ("record_full_reg") or a part of memory ("record_full_mem"). And each
72 instruction must have a struct record_full_entry ("record_full_end")
73 that indicates that this is the last struct record_full_entry of this
74 instruction.
75
76 Each struct record_full_entry is linked to "record_full_list" by "prev"
77 and "next" pointers. */
78
79 struct record_full_mem_entry
80 {
81 CORE_ADDR addr;
82 int len;
83 /* Set this flag if target memory for this entry
84 can no longer be accessed. */
85 int mem_entry_not_accessible;
86 union
87 {
88 gdb_byte *ptr;
89 gdb_byte buf[sizeof (gdb_byte *)];
90 } u;
91 };
92
93 struct record_full_reg_entry
94 {
95 unsigned short num;
96 unsigned short len;
97 union
98 {
99 gdb_byte *ptr;
100 gdb_byte buf[2 * sizeof (gdb_byte *)];
101 } u;
102 };
103
104 struct record_full_end_entry
105 {
106 enum gdb_signal sigval;
107 ULONGEST insn_num;
108 };
109
110 enum record_full_type
111 {
112 record_full_end = 0,
113 record_full_reg,
114 record_full_mem
115 };
116
117 /* This is the data structure that makes up the execution log.
118
119 The execution log consists of a single linked list of entries
120 of type "struct record_full_entry". It is doubly linked so that it
121 can be traversed in either direction.
122
123 The start of the list is anchored by a struct called
124 "record_full_first". The pointer "record_full_list" either points
125 to the last entry that was added to the list (in record mode), or to
126 the next entry in the list that will be executed (in replay mode).
127
128 Each list element (struct record_full_entry), in addition to next
129 and prev pointers, consists of a union of three entry types: mem,
130 reg, and end. A field called "type" determines which entry type is
131 represented by a given list element.
132
133 Each instruction that is added to the execution log is represented
134 by a variable number of list elements ('entries'). The instruction
135 will have one "reg" entry for each register that is changed by
136 executing the instruction (including the PC in every case). It
137 will also have one "mem" entry for each memory change. Finally,
138 each instruction will have an "end" entry that separates it from
139 the changes associated with the next instruction. */
140
141 struct record_full_entry
142 {
143 struct record_full_entry *prev;
144 struct record_full_entry *next;
145 enum record_full_type type;
146 union
147 {
148 /* reg */
149 struct record_full_reg_entry reg;
150 /* mem */
151 struct record_full_mem_entry mem;
152 /* end */
153 struct record_full_end_entry end;
154 } u;
155 };
156
157 /* If true, query if PREC cannot record memory
158 change of next instruction. */
159 int record_full_memory_query = 0;
160
161 struct record_full_core_buf_entry
162 {
163 struct record_full_core_buf_entry *prev;
164 struct target_section *p;
165 bfd_byte *buf;
166 };
167
168 /* Record buf with core target. */
169 static gdb_byte *record_full_core_regbuf = NULL;
170 static struct target_section *record_full_core_start;
171 static struct target_section *record_full_core_end;
172 static struct record_full_core_buf_entry *record_full_core_buf_list = NULL;
173
174 /* The following variables are used for managing the linked list that
175 represents the execution log.
176
177 record_full_first is the anchor that holds down the beginning of
178 the list.
179
180 record_full_list serves two functions:
181 1) In record mode, it anchors the end of the list.
182 2) In replay mode, it traverses the list and points to
183 the next instruction that must be emulated.
184
185 record_full_arch_list_head and record_full_arch_list_tail are used
186 to manage a separate list, which is used to build up the change
187 elements of the currently executing instruction during record mode.
188 When this instruction has been completely annotated in the "arch
189 list", it will be appended to the main execution log. */
190
191 static struct record_full_entry record_full_first;
192 static struct record_full_entry *record_full_list = &record_full_first;
193 static struct record_full_entry *record_full_arch_list_head = NULL;
194 static struct record_full_entry *record_full_arch_list_tail = NULL;
195
196 /* 1 ask user. 0 auto delete the last struct record_full_entry. */
197 static int record_full_stop_at_limit = 1;
198 /* Maximum allowed number of insns in execution log. */
199 static unsigned int record_full_insn_max_num
200 = DEFAULT_RECORD_FULL_INSN_MAX_NUM;
201 /* Actual count of insns presently in execution log. */
202 static unsigned int record_full_insn_num = 0;
203 /* Count of insns logged so far (may be larger
204 than count of insns presently in execution log). */
205 static ULONGEST record_full_insn_count;
206
207 /* The target_ops of process record. */
208 static struct target_ops record_full_ops;
209 static struct target_ops record_full_core_ops;
210
211 /* Command lists for "set/show record full". */
212 static struct cmd_list_element *set_record_full_cmdlist;
213 static struct cmd_list_element *show_record_full_cmdlist;
214
215 /* Command list for "record full". */
216 static struct cmd_list_element *record_full_cmdlist;
217
218 /* The beneath function pointers. */
219 static struct target_ops *record_full_beneath_to_resume_ops;
220 static void (*record_full_beneath_to_resume) (struct target_ops *, ptid_t, int,
221 enum gdb_signal);
222 static struct target_ops *record_full_beneath_to_wait_ops;
223 static ptid_t (*record_full_beneath_to_wait) (struct target_ops *, ptid_t,
224 struct target_waitstatus *,
225 int);
226 static struct target_ops *record_full_beneath_to_store_registers_ops;
227 static void (*record_full_beneath_to_store_registers) (struct target_ops *,
228 struct regcache *,
229 int regno);
230 static struct target_ops *record_full_beneath_to_xfer_partial_ops;
231 static LONGEST
232 (*record_full_beneath_to_xfer_partial) (struct target_ops *ops,
233 enum target_object object,
234 const char *annex,
235 gdb_byte *readbuf,
236 const gdb_byte *writebuf,
237 ULONGEST offset,
238 LONGEST len);
239 static int
240 (*record_full_beneath_to_insert_breakpoint) (struct gdbarch *,
241 struct bp_target_info *);
242 static int
243 (*record_full_beneath_to_remove_breakpoint) (struct gdbarch *,
244 struct bp_target_info *);
245 static int (*record_full_beneath_to_stopped_by_watchpoint) (void);
246 static int (*record_full_beneath_to_stopped_data_address) (struct target_ops *,
247 CORE_ADDR *);
248 static void
249 (*record_full_beneath_to_async) (void (*) (enum inferior_event_type, void *),
250 void *);
251
252 static void record_full_goto_insn (struct record_full_entry *entry,
253 enum exec_direction_kind dir);
254 static void record_full_save (char *recfilename);
255
256 /* Alloc and free functions for record_full_reg, record_full_mem, and
257 record_full_end entries. */
258
259 /* Alloc a record_full_reg record entry. */
260
261 static inline struct record_full_entry *
262 record_full_reg_alloc (struct regcache *regcache, int regnum)
263 {
264 struct record_full_entry *rec;
265 struct gdbarch *gdbarch = get_regcache_arch (regcache);
266
267 rec = xcalloc (1, sizeof (struct record_full_entry));
268 rec->type = record_full_reg;
269 rec->u.reg.num = regnum;
270 rec->u.reg.len = register_size (gdbarch, regnum);
271 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
272 rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len);
273
274 return rec;
275 }
276
277 /* Free a record_full_reg record entry. */
278
279 static inline void
280 record_full_reg_release (struct record_full_entry *rec)
281 {
282 gdb_assert (rec->type == record_full_reg);
283 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
284 xfree (rec->u.reg.u.ptr);
285 xfree (rec);
286 }
287
288 /* Alloc a record_full_mem record entry. */
289
290 static inline struct record_full_entry *
291 record_full_mem_alloc (CORE_ADDR addr, int len)
292 {
293 struct record_full_entry *rec;
294
295 rec = xcalloc (1, sizeof (struct record_full_entry));
296 rec->type = record_full_mem;
297 rec->u.mem.addr = addr;
298 rec->u.mem.len = len;
299 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
300 rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len);
301
302 return rec;
303 }
304
305 /* Free a record_full_mem record entry. */
306
307 static inline void
308 record_full_mem_release (struct record_full_entry *rec)
309 {
310 gdb_assert (rec->type == record_full_mem);
311 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
312 xfree (rec->u.mem.u.ptr);
313 xfree (rec);
314 }
315
316 /* Alloc a record_full_end record entry. */
317
318 static inline struct record_full_entry *
319 record_full_end_alloc (void)
320 {
321 struct record_full_entry *rec;
322
323 rec = xcalloc (1, sizeof (struct record_full_entry));
324 rec->type = record_full_end;
325
326 return rec;
327 }
328
329 /* Free a record_full_end record entry. */
330
331 static inline void
332 record_full_end_release (struct record_full_entry *rec)
333 {
334 xfree (rec);
335 }
336
337 /* Free one record entry, any type.
338 Return entry->type, in case caller wants to know. */
339
340 static inline enum record_full_type
341 record_full_entry_release (struct record_full_entry *rec)
342 {
343 enum record_full_type type = rec->type;
344
345 switch (type) {
346 case record_full_reg:
347 record_full_reg_release (rec);
348 break;
349 case record_full_mem:
350 record_full_mem_release (rec);
351 break;
352 case record_full_end:
353 record_full_end_release (rec);
354 break;
355 }
356 return type;
357 }
358
359 /* Free all record entries in list pointed to by REC. */
360
361 static void
362 record_full_list_release (struct record_full_entry *rec)
363 {
364 if (!rec)
365 return;
366
367 while (rec->next)
368 rec = rec->next;
369
370 while (rec->prev)
371 {
372 rec = rec->prev;
373 record_full_entry_release (rec->next);
374 }
375
376 if (rec == &record_full_first)
377 {
378 record_full_insn_num = 0;
379 record_full_first.next = NULL;
380 }
381 else
382 record_full_entry_release (rec);
383 }
384
385 /* Free all record entries forward of the given list position. */
386
387 static void
388 record_full_list_release_following (struct record_full_entry *rec)
389 {
390 struct record_full_entry *tmp = rec->next;
391
392 rec->next = NULL;
393 while (tmp)
394 {
395 rec = tmp->next;
396 if (record_full_entry_release (tmp) == record_full_end)
397 {
398 record_full_insn_num--;
399 record_full_insn_count--;
400 }
401 tmp = rec;
402 }
403 }
404
405 /* Delete the first instruction from the beginning of the log, to make
406 room for adding a new instruction at the end of the log.
407
408 Note -- this function does not modify record_full_insn_num. */
409
410 static void
411 record_full_list_release_first (void)
412 {
413 struct record_full_entry *tmp;
414
415 if (!record_full_first.next)
416 return;
417
418 /* Loop until a record_full_end. */
419 while (1)
420 {
421 /* Cut record_full_first.next out of the linked list. */
422 tmp = record_full_first.next;
423 record_full_first.next = tmp->next;
424 tmp->next->prev = &record_full_first;
425
426 /* tmp is now isolated, and can be deleted. */
427 if (record_full_entry_release (tmp) == record_full_end)
428 break; /* End loop at first record_full_end. */
429
430 if (!record_full_first.next)
431 {
432 gdb_assert (record_full_insn_num == 1);
433 break; /* End loop when list is empty. */
434 }
435 }
436 }
437
438 /* Add a struct record_full_entry to record_full_arch_list. */
439
440 static void
441 record_full_arch_list_add (struct record_full_entry *rec)
442 {
443 if (record_debug > 1)
444 fprintf_unfiltered (gdb_stdlog,
445 "Process record: record_full_arch_list_add %s.\n",
446 host_address_to_string (rec));
447
448 if (record_full_arch_list_tail)
449 {
450 record_full_arch_list_tail->next = rec;
451 rec->prev = record_full_arch_list_tail;
452 record_full_arch_list_tail = rec;
453 }
454 else
455 {
456 record_full_arch_list_head = rec;
457 record_full_arch_list_tail = rec;
458 }
459 }
460
461 /* Return the value storage location of a record entry. */
462 static inline gdb_byte *
463 record_full_get_loc (struct record_full_entry *rec)
464 {
465 switch (rec->type) {
466 case record_full_mem:
467 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
468 return rec->u.mem.u.ptr;
469 else
470 return rec->u.mem.u.buf;
471 case record_full_reg:
472 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
473 return rec->u.reg.u.ptr;
474 else
475 return rec->u.reg.u.buf;
476 case record_full_end:
477 default:
478 gdb_assert_not_reached ("unexpected record_full_entry type");
479 return NULL;
480 }
481 }
482
483 /* Record the value of a register NUM to record_full_arch_list. */
484
485 int
486 record_full_arch_list_add_reg (struct regcache *regcache, int regnum)
487 {
488 struct record_full_entry *rec;
489
490 if (record_debug > 1)
491 fprintf_unfiltered (gdb_stdlog,
492 "Process record: add register num = %d to "
493 "record list.\n",
494 regnum);
495
496 rec = record_full_reg_alloc (regcache, regnum);
497
498 regcache_raw_read (regcache, regnum, record_full_get_loc (rec));
499
500 record_full_arch_list_add (rec);
501
502 return 0;
503 }
504
505 /* Record the value of a region of memory whose address is ADDR and
506 length is LEN to record_full_arch_list. */
507
508 int
509 record_full_arch_list_add_mem (CORE_ADDR addr, int len)
510 {
511 struct record_full_entry *rec;
512
513 if (record_debug > 1)
514 fprintf_unfiltered (gdb_stdlog,
515 "Process record: add mem addr = %s len = %d to "
516 "record list.\n",
517 paddress (target_gdbarch (), addr), len);
518
519 if (!addr) /* FIXME: Why? Some arch must permit it... */
520 return 0;
521
522 rec = record_full_mem_alloc (addr, len);
523
524 if (record_read_memory (target_gdbarch (), addr,
525 record_full_get_loc (rec), len))
526 {
527 record_full_mem_release (rec);
528 return -1;
529 }
530
531 record_full_arch_list_add (rec);
532
533 return 0;
534 }
535
536 /* Add a record_full_end type struct record_full_entry to
537 record_full_arch_list. */
538
539 int
540 record_full_arch_list_add_end (void)
541 {
542 struct record_full_entry *rec;
543
544 if (record_debug > 1)
545 fprintf_unfiltered (gdb_stdlog,
546 "Process record: add end to arch list.\n");
547
548 rec = record_full_end_alloc ();
549 rec->u.end.sigval = GDB_SIGNAL_0;
550 rec->u.end.insn_num = ++record_full_insn_count;
551
552 record_full_arch_list_add (rec);
553
554 return 0;
555 }
556
557 static void
558 record_full_check_insn_num (int set_terminal)
559 {
560 if (record_full_insn_num == record_full_insn_max_num)
561 {
562 /* Ask user what to do. */
563 if (record_full_stop_at_limit)
564 {
565 int q;
566
567 if (set_terminal)
568 target_terminal_ours ();
569 q = yquery (_("Do you want to auto delete previous execution "
570 "log entries when record/replay buffer becomes "
571 "full (record full stop-at-limit)?"));
572 if (set_terminal)
573 target_terminal_inferior ();
574 if (q)
575 record_full_stop_at_limit = 0;
576 else
577 error (_("Process record: stopped by user."));
578 }
579 }
580 }
581
582 static void
583 record_full_arch_list_cleanups (void *ignore)
584 {
585 record_full_list_release (record_full_arch_list_tail);
586 }
587
588 /* Before inferior step (when GDB record the running message, inferior
589 only can step), GDB will call this function to record the values to
590 record_full_list. This function will call gdbarch_process_record to
591 record the running message of inferior and set them to
592 record_full_arch_list, and add it to record_full_list. */
593
594 static int
595 record_full_message (struct regcache *regcache, enum gdb_signal signal)
596 {
597 int ret;
598 struct gdbarch *gdbarch = get_regcache_arch (regcache);
599 struct cleanup *old_cleanups
600 = make_cleanup (record_full_arch_list_cleanups, 0);
601
602 record_full_arch_list_head = NULL;
603 record_full_arch_list_tail = NULL;
604
605 /* Check record_full_insn_num. */
606 record_full_check_insn_num (1);
607
608 /* If gdb sends a signal value to target_resume,
609 save it in the 'end' field of the previous instruction.
610
611 Maybe process record should record what really happened,
612 rather than what gdb pretends has happened.
613
614 So if Linux delivered the signal to the child process during
615 the record mode, we will record it and deliver it again in
616 the replay mode.
617
618 If user says "ignore this signal" during the record mode, then
619 it will be ignored again during the replay mode (no matter if
620 the user says something different, like "deliver this signal"
621 during the replay mode).
622
623 User should understand that nothing he does during the replay
624 mode will change the behavior of the child. If he tries,
625 then that is a user error.
626
627 But we should still deliver the signal to gdb during the replay,
628 if we delivered it during the recording. Therefore we should
629 record the signal during record_full_wait, not
630 record_full_resume. */
631 if (record_full_list != &record_full_first) /* FIXME better way to check */
632 {
633 gdb_assert (record_full_list->type == record_full_end);
634 record_full_list->u.end.sigval = signal;
635 }
636
637 if (signal == GDB_SIGNAL_0
638 || !gdbarch_process_record_signal_p (gdbarch))
639 ret = gdbarch_process_record (gdbarch,
640 regcache,
641 regcache_read_pc (regcache));
642 else
643 ret = gdbarch_process_record_signal (gdbarch,
644 regcache,
645 signal);
646
647 if (ret > 0)
648 error (_("Process record: inferior program stopped."));
649 if (ret < 0)
650 error (_("Process record: failed to record execution log."));
651
652 discard_cleanups (old_cleanups);
653
654 record_full_list->next = record_full_arch_list_head;
655 record_full_arch_list_head->prev = record_full_list;
656 record_full_list = record_full_arch_list_tail;
657
658 if (record_full_insn_num == record_full_insn_max_num)
659 record_full_list_release_first ();
660 else
661 record_full_insn_num++;
662
663 return 1;
664 }
665
666 struct record_full_message_args {
667 struct regcache *regcache;
668 enum gdb_signal signal;
669 };
670
671 static int
672 record_full_message_wrapper (void *args)
673 {
674 struct record_full_message_args *record_full_args = args;
675
676 return record_full_message (record_full_args->regcache,
677 record_full_args->signal);
678 }
679
680 static int
681 record_full_message_wrapper_safe (struct regcache *regcache,
682 enum gdb_signal signal)
683 {
684 struct record_full_message_args args;
685
686 args.regcache = regcache;
687 args.signal = signal;
688
689 return catch_errors (record_full_message_wrapper, &args, NULL,
690 RETURN_MASK_ALL);
691 }
692
693 /* Set to 1 if record_full_store_registers and record_full_xfer_partial
694 doesn't need record. */
695
696 static int record_full_gdb_operation_disable = 0;
697
698 struct cleanup *
699 record_full_gdb_operation_disable_set (void)
700 {
701 struct cleanup *old_cleanups = NULL;
702
703 old_cleanups =
704 make_cleanup_restore_integer (&record_full_gdb_operation_disable);
705 record_full_gdb_operation_disable = 1;
706
707 return old_cleanups;
708 }
709
710 /* Flag set to TRUE for target_stopped_by_watchpoint. */
711 static int record_full_hw_watchpoint = 0;
712
713 /* Execute one instruction from the record log. Each instruction in
714 the log will be represented by an arbitrary sequence of register
715 entries and memory entries, followed by an 'end' entry. */
716
717 static inline void
718 record_full_exec_insn (struct regcache *regcache,
719 struct gdbarch *gdbarch,
720 struct record_full_entry *entry)
721 {
722 switch (entry->type)
723 {
724 case record_full_reg: /* reg */
725 {
726 gdb_byte reg[MAX_REGISTER_SIZE];
727
728 if (record_debug > 1)
729 fprintf_unfiltered (gdb_stdlog,
730 "Process record: record_full_reg %s to "
731 "inferior num = %d.\n",
732 host_address_to_string (entry),
733 entry->u.reg.num);
734
735 regcache_cooked_read (regcache, entry->u.reg.num, reg);
736 regcache_cooked_write (regcache, entry->u.reg.num,
737 record_full_get_loc (entry));
738 memcpy (record_full_get_loc (entry), reg, entry->u.reg.len);
739 }
740 break;
741
742 case record_full_mem: /* mem */
743 {
744 /* Nothing to do if the entry is flagged not_accessible. */
745 if (!entry->u.mem.mem_entry_not_accessible)
746 {
747 gdb_byte *mem = alloca (entry->u.mem.len);
748
749 if (record_debug > 1)
750 fprintf_unfiltered (gdb_stdlog,
751 "Process record: record_full_mem %s to "
752 "inferior addr = %s len = %d.\n",
753 host_address_to_string (entry),
754 paddress (gdbarch, entry->u.mem.addr),
755 entry->u.mem.len);
756
757 if (record_read_memory (gdbarch,
758 entry->u.mem.addr, mem, entry->u.mem.len))
759 entry->u.mem.mem_entry_not_accessible = 1;
760 else
761 {
762 if (target_write_memory (entry->u.mem.addr,
763 record_full_get_loc (entry),
764 entry->u.mem.len))
765 {
766 entry->u.mem.mem_entry_not_accessible = 1;
767 if (record_debug)
768 warning (_("Process record: error writing memory at "
769 "addr = %s len = %d."),
770 paddress (gdbarch, entry->u.mem.addr),
771 entry->u.mem.len);
772 }
773 else
774 {
775 memcpy (record_full_get_loc (entry), mem,
776 entry->u.mem.len);
777
778 /* We've changed memory --- check if a hardware
779 watchpoint should trap. Note that this
780 presently assumes the target beneath supports
781 continuable watchpoints. On non-continuable
782 watchpoints target, we'll want to check this
783 _before_ actually doing the memory change, and
784 not doing the change at all if the watchpoint
785 traps. */
786 if (hardware_watchpoint_inserted_in_range
787 (get_regcache_aspace (regcache),
788 entry->u.mem.addr, entry->u.mem.len))
789 record_full_hw_watchpoint = 1;
790 }
791 }
792 }
793 }
794 break;
795 }
796 }
797
798 static struct target_ops *tmp_to_resume_ops;
799 static void (*tmp_to_resume) (struct target_ops *, ptid_t, int,
800 enum gdb_signal);
801 static struct target_ops *tmp_to_wait_ops;
802 static ptid_t (*tmp_to_wait) (struct target_ops *, ptid_t,
803 struct target_waitstatus *,
804 int);
805 static struct target_ops *tmp_to_store_registers_ops;
806 static void (*tmp_to_store_registers) (struct target_ops *,
807 struct regcache *,
808 int regno);
809 static struct target_ops *tmp_to_xfer_partial_ops;
810 static LONGEST (*tmp_to_xfer_partial) (struct target_ops *ops,
811 enum target_object object,
812 const char *annex,
813 gdb_byte *readbuf,
814 const gdb_byte *writebuf,
815 ULONGEST offset,
816 LONGEST len);
817 static int (*tmp_to_insert_breakpoint) (struct gdbarch *,
818 struct bp_target_info *);
819 static int (*tmp_to_remove_breakpoint) (struct gdbarch *,
820 struct bp_target_info *);
821 static int (*tmp_to_stopped_by_watchpoint) (void);
822 static int (*tmp_to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
823 static int (*tmp_to_stopped_data_address) (struct target_ops *, CORE_ADDR *);
824 static void (*tmp_to_async) (void (*) (enum inferior_event_type, void *), void *);
825
826 static void record_full_restore (void);
827
828 /* Asynchronous signal handle registered as event loop source for when
829 we have pending events ready to be passed to the core. */
830
831 static struct async_event_handler *record_full_async_inferior_event_token;
832
833 static void
834 record_full_async_inferior_event_handler (gdb_client_data data)
835 {
836 inferior_event_handler (INF_REG_EVENT, NULL);
837 }
838
839 /* Open the process record target. */
840
841 static void
842 record_full_core_open_1 (char *name, int from_tty)
843 {
844 struct regcache *regcache = get_current_regcache ();
845 int regnum = gdbarch_num_regs (get_regcache_arch (regcache));
846 int i;
847
848 /* Get record_full_core_regbuf. */
849 target_fetch_registers (regcache, -1);
850 record_full_core_regbuf = xmalloc (MAX_REGISTER_SIZE * regnum);
851 for (i = 0; i < regnum; i ++)
852 regcache_raw_collect (regcache, i,
853 record_full_core_regbuf + MAX_REGISTER_SIZE * i);
854
855 /* Get record_full_core_start and record_full_core_end. */
856 if (build_section_table (core_bfd, &record_full_core_start,
857 &record_full_core_end))
858 {
859 xfree (record_full_core_regbuf);
860 record_full_core_regbuf = NULL;
861 error (_("\"%s\": Can't find sections: %s"),
862 bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ()));
863 }
864
865 push_target (&record_full_core_ops);
866 record_full_restore ();
867 }
868
869 /* "to_open" target method for 'live' processes. */
870
871 static void
872 record_full_open_1 (char *name, int from_tty)
873 {
874 if (record_debug)
875 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
876
877 /* check exec */
878 if (!target_has_execution)
879 error (_("Process record: the program is not being run."));
880 if (non_stop)
881 error (_("Process record target can't debug inferior in non-stop mode "
882 "(non-stop)."));
883
884 if (!gdbarch_process_record_p (target_gdbarch ()))
885 error (_("Process record: the current architecture doesn't support "
886 "record function."));
887
888 if (!tmp_to_resume)
889 error (_("Could not find 'to_resume' method on the target stack."));
890 if (!tmp_to_wait)
891 error (_("Could not find 'to_wait' method on the target stack."));
892 if (!tmp_to_store_registers)
893 error (_("Could not find 'to_store_registers' "
894 "method on the target stack."));
895 if (!tmp_to_insert_breakpoint)
896 error (_("Could not find 'to_insert_breakpoint' "
897 "method on the target stack."));
898 if (!tmp_to_remove_breakpoint)
899 error (_("Could not find 'to_remove_breakpoint' "
900 "method on the target stack."));
901 if (!tmp_to_stopped_by_watchpoint)
902 error (_("Could not find 'to_stopped_by_watchpoint' "
903 "method on the target stack."));
904 if (!tmp_to_stopped_data_address)
905 error (_("Could not find 'to_stopped_data_address' "
906 "method on the target stack."));
907
908 push_target (&record_full_ops);
909 }
910
911 static void record_full_init_record_breakpoints (void);
912
913 /* "to_open" target method. Open the process record target. */
914
915 static void
916 record_full_open (char *name, int from_tty)
917 {
918 struct target_ops *t;
919
920 if (record_debug)
921 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
922
923 /* Check if record target is already running. */
924 if (current_target.to_stratum == record_stratum)
925 error (_("Process record target already running. Use \"record stop\" to "
926 "stop record target first."));
927
928 /* Reset the tmp beneath pointers. */
929 tmp_to_resume_ops = NULL;
930 tmp_to_resume = NULL;
931 tmp_to_wait_ops = NULL;
932 tmp_to_wait = NULL;
933 tmp_to_store_registers_ops = NULL;
934 tmp_to_store_registers = NULL;
935 tmp_to_xfer_partial_ops = NULL;
936 tmp_to_xfer_partial = NULL;
937 tmp_to_insert_breakpoint = NULL;
938 tmp_to_remove_breakpoint = NULL;
939 tmp_to_stopped_by_watchpoint = NULL;
940 tmp_to_stopped_data_address = NULL;
941 tmp_to_async = NULL;
942
943 /* Set the beneath function pointers. */
944 for (t = current_target.beneath; t != NULL; t = t->beneath)
945 {
946 if (!tmp_to_resume)
947 {
948 tmp_to_resume = t->to_resume;
949 tmp_to_resume_ops = t;
950 }
951 if (!tmp_to_wait)
952 {
953 tmp_to_wait = t->to_wait;
954 tmp_to_wait_ops = t;
955 }
956 if (!tmp_to_store_registers)
957 {
958 tmp_to_store_registers = t->to_store_registers;
959 tmp_to_store_registers_ops = t;
960 }
961 if (!tmp_to_xfer_partial)
962 {
963 tmp_to_xfer_partial = t->to_xfer_partial;
964 tmp_to_xfer_partial_ops = t;
965 }
966 if (!tmp_to_insert_breakpoint)
967 tmp_to_insert_breakpoint = t->to_insert_breakpoint;
968 if (!tmp_to_remove_breakpoint)
969 tmp_to_remove_breakpoint = t->to_remove_breakpoint;
970 if (!tmp_to_stopped_by_watchpoint)
971 tmp_to_stopped_by_watchpoint = t->to_stopped_by_watchpoint;
972 if (!tmp_to_stopped_data_address)
973 tmp_to_stopped_data_address = t->to_stopped_data_address;
974 if (!tmp_to_async)
975 tmp_to_async = t->to_async;
976 }
977 if (!tmp_to_xfer_partial)
978 error (_("Could not find 'to_xfer_partial' method on the target stack."));
979
980 /* Reset */
981 record_full_insn_num = 0;
982 record_full_insn_count = 0;
983 record_full_list = &record_full_first;
984 record_full_list->next = NULL;
985
986 /* Set the tmp beneath pointers to beneath pointers. */
987 record_full_beneath_to_resume_ops = tmp_to_resume_ops;
988 record_full_beneath_to_resume = tmp_to_resume;
989 record_full_beneath_to_wait_ops = tmp_to_wait_ops;
990 record_full_beneath_to_wait = tmp_to_wait;
991 record_full_beneath_to_store_registers_ops = tmp_to_store_registers_ops;
992 record_full_beneath_to_store_registers = tmp_to_store_registers;
993 record_full_beneath_to_xfer_partial_ops = tmp_to_xfer_partial_ops;
994 record_full_beneath_to_xfer_partial = tmp_to_xfer_partial;
995 record_full_beneath_to_insert_breakpoint = tmp_to_insert_breakpoint;
996 record_full_beneath_to_remove_breakpoint = tmp_to_remove_breakpoint;
997 record_full_beneath_to_stopped_by_watchpoint = tmp_to_stopped_by_watchpoint;
998 record_full_beneath_to_stopped_data_address = tmp_to_stopped_data_address;
999 record_full_beneath_to_async = tmp_to_async;
1000
1001 if (core_bfd)
1002 record_full_core_open_1 (name, from_tty);
1003 else
1004 record_full_open_1 (name, from_tty);
1005
1006 /* Register extra event sources in the event loop. */
1007 record_full_async_inferior_event_token
1008 = create_async_event_handler (record_full_async_inferior_event_handler,
1009 NULL);
1010
1011 record_full_init_record_breakpoints ();
1012
1013 observer_notify_record_changed (current_inferior (), 1);
1014 }
1015
1016 /* "to_close" target method. Close the process record target. */
1017
1018 static void
1019 record_full_close (void)
1020 {
1021 struct record_full_core_buf_entry *entry;
1022
1023 if (record_debug)
1024 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_close\n");
1025
1026 record_full_list_release (record_full_list);
1027
1028 /* Release record_full_core_regbuf. */
1029 if (record_full_core_regbuf)
1030 {
1031 xfree (record_full_core_regbuf);
1032 record_full_core_regbuf = NULL;
1033 }
1034
1035 /* Release record_full_core_buf_list. */
1036 if (record_full_core_buf_list)
1037 {
1038 for (entry = record_full_core_buf_list->prev; entry;
1039 entry = entry->prev)
1040 {
1041 xfree (record_full_core_buf_list);
1042 record_full_core_buf_list = entry;
1043 }
1044 record_full_core_buf_list = NULL;
1045 }
1046
1047 if (record_full_async_inferior_event_token)
1048 delete_async_event_handler (&record_full_async_inferior_event_token);
1049 }
1050
1051 static int record_full_resume_step = 0;
1052
1053 /* True if we've been resumed, and so each record_full_wait call should
1054 advance execution. If this is false, record_full_wait will return a
1055 TARGET_WAITKIND_IGNORE. */
1056 static int record_full_resumed = 0;
1057
1058 /* The execution direction of the last resume we got. This is
1059 necessary for async mode. Vis (order is not strictly accurate):
1060
1061 1. user has the global execution direction set to forward
1062 2. user does a reverse-step command
1063 3. record_full_resume is called with global execution direction
1064 temporarily switched to reverse
1065 4. GDB's execution direction is reverted back to forward
1066 5. target record notifies event loop there's an event to handle
1067 6. infrun asks the target which direction was it going, and switches
1068 the global execution direction accordingly (to reverse)
1069 7. infrun polls an event out of the record target, and handles it
1070 8. GDB goes back to the event loop, and goto #4.
1071 */
1072 static enum exec_direction_kind record_full_execution_dir = EXEC_FORWARD;
1073
1074 /* "to_resume" target method. Resume the process record target. */
1075
1076 static void
1077 record_full_resume (struct target_ops *ops, ptid_t ptid, int step,
1078 enum gdb_signal signal)
1079 {
1080 record_full_resume_step = step;
1081 record_full_resumed = 1;
1082 record_full_execution_dir = execution_direction;
1083
1084 if (!RECORD_FULL_IS_REPLAY)
1085 {
1086 struct gdbarch *gdbarch = target_thread_architecture (ptid);
1087
1088 record_full_message (get_current_regcache (), signal);
1089
1090 if (!step)
1091 {
1092 /* This is not hard single step. */
1093 if (!gdbarch_software_single_step_p (gdbarch))
1094 {
1095 /* This is a normal continue. */
1096 step = 1;
1097 }
1098 else
1099 {
1100 /* This arch support soft sigle step. */
1101 if (single_step_breakpoints_inserted ())
1102 {
1103 /* This is a soft single step. */
1104 record_full_resume_step = 1;
1105 }
1106 else
1107 {
1108 /* This is a continue.
1109 Try to insert a soft single step breakpoint. */
1110 if (!gdbarch_software_single_step (gdbarch,
1111 get_current_frame ()))
1112 {
1113 /* This system don't want use soft single step.
1114 Use hard sigle step. */
1115 step = 1;
1116 }
1117 }
1118 }
1119 }
1120
1121 /* Make sure the target beneath reports all signals. */
1122 target_pass_signals (0, NULL);
1123
1124 record_full_beneath_to_resume (record_full_beneath_to_resume_ops,
1125 ptid, step, signal);
1126 }
1127
1128 /* We are about to start executing the inferior (or simulate it),
1129 let's register it with the event loop. */
1130 if (target_can_async_p ())
1131 {
1132 target_async (inferior_event_handler, 0);
1133 /* Notify the event loop there's an event to wait for. We do
1134 most of the work in record_full_wait. */
1135 mark_async_event_handler (record_full_async_inferior_event_token);
1136 }
1137 }
1138
1139 static int record_full_get_sig = 0;
1140
1141 /* SIGINT signal handler, registered by "to_wait" method. */
1142
1143 static void
1144 record_full_sig_handler (int signo)
1145 {
1146 if (record_debug)
1147 fprintf_unfiltered (gdb_stdlog, "Process record: get a signal\n");
1148
1149 /* It will break the running inferior in replay mode. */
1150 record_full_resume_step = 1;
1151
1152 /* It will let record_full_wait set inferior status to get the signal
1153 SIGINT. */
1154 record_full_get_sig = 1;
1155 }
1156
1157 static void
1158 record_full_wait_cleanups (void *ignore)
1159 {
1160 if (execution_direction == EXEC_REVERSE)
1161 {
1162 if (record_full_list->next)
1163 record_full_list = record_full_list->next;
1164 }
1165 else
1166 record_full_list = record_full_list->prev;
1167 }
1168
1169 /* "to_wait" target method for process record target.
1170
1171 In record mode, the target is always run in singlestep mode
1172 (even when gdb says to continue). The to_wait method intercepts
1173 the stop events and determines which ones are to be passed on to
1174 gdb. Most stop events are just singlestep events that gdb is not
1175 to know about, so the to_wait method just records them and keeps
1176 singlestepping.
1177
1178 In replay mode, this function emulates the recorded execution log,
1179 one instruction at a time (forward or backward), and determines
1180 where to stop. */
1181
1182 static ptid_t
1183 record_full_wait_1 (struct target_ops *ops,
1184 ptid_t ptid, struct target_waitstatus *status,
1185 int options)
1186 {
1187 struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
1188
1189 if (record_debug)
1190 fprintf_unfiltered (gdb_stdlog,
1191 "Process record: record_full_wait "
1192 "record_full_resume_step = %d, "
1193 "record_full_resumed = %d, direction=%s\n",
1194 record_full_resume_step, record_full_resumed,
1195 record_full_execution_dir == EXEC_FORWARD
1196 ? "forward" : "reverse");
1197
1198 if (!record_full_resumed)
1199 {
1200 gdb_assert ((options & TARGET_WNOHANG) != 0);
1201
1202 /* No interesting event. */
1203 status->kind = TARGET_WAITKIND_IGNORE;
1204 return minus_one_ptid;
1205 }
1206
1207 record_full_get_sig = 0;
1208 signal (SIGINT, record_full_sig_handler);
1209
1210 if (!RECORD_FULL_IS_REPLAY && ops != &record_full_core_ops)
1211 {
1212 if (record_full_resume_step)
1213 {
1214 /* This is a single step. */
1215 return record_full_beneath_to_wait (record_full_beneath_to_wait_ops,
1216 ptid, status, options);
1217 }
1218 else
1219 {
1220 /* This is not a single step. */
1221 ptid_t ret;
1222 CORE_ADDR tmp_pc;
1223 struct gdbarch *gdbarch = target_thread_architecture (inferior_ptid);
1224
1225 while (1)
1226 {
1227 ret = record_full_beneath_to_wait
1228 (record_full_beneath_to_wait_ops, ptid, status, options);
1229 if (status->kind == TARGET_WAITKIND_IGNORE)
1230 {
1231 if (record_debug)
1232 fprintf_unfiltered (gdb_stdlog,
1233 "Process record: record_full_wait "
1234 "target beneath not done yet\n");
1235 return ret;
1236 }
1237
1238 if (single_step_breakpoints_inserted ())
1239 remove_single_step_breakpoints ();
1240
1241 if (record_full_resume_step)
1242 return ret;
1243
1244 /* Is this a SIGTRAP? */
1245 if (status->kind == TARGET_WAITKIND_STOPPED
1246 && status->value.sig == GDB_SIGNAL_TRAP)
1247 {
1248 struct regcache *regcache;
1249 struct address_space *aspace;
1250
1251 /* Yes -- this is likely our single-step finishing,
1252 but check if there's any reason the core would be
1253 interested in the event. */
1254
1255 registers_changed ();
1256 regcache = get_current_regcache ();
1257 tmp_pc = regcache_read_pc (regcache);
1258 aspace = get_regcache_aspace (regcache);
1259
1260 if (target_stopped_by_watchpoint ())
1261 {
1262 /* Always interested in watchpoints. */
1263 }
1264 else if (breakpoint_inserted_here_p (aspace, tmp_pc))
1265 {
1266 /* There is a breakpoint here. Let the core
1267 handle it. */
1268 if (software_breakpoint_inserted_here_p (aspace, tmp_pc))
1269 {
1270 struct gdbarch *gdbarch
1271 = get_regcache_arch (regcache);
1272 CORE_ADDR decr_pc_after_break
1273 = gdbarch_decr_pc_after_break (gdbarch);
1274 if (decr_pc_after_break)
1275 regcache_write_pc (regcache,
1276 tmp_pc + decr_pc_after_break);
1277 }
1278 }
1279 else
1280 {
1281 /* This is a single-step trap. Record the
1282 insn and issue another step.
1283 FIXME: this part can be a random SIGTRAP too.
1284 But GDB cannot handle it. */
1285 int step = 1;
1286
1287 if (!record_full_message_wrapper_safe (regcache,
1288 GDB_SIGNAL_0))
1289 {
1290 status->kind = TARGET_WAITKIND_STOPPED;
1291 status->value.sig = GDB_SIGNAL_0;
1292 break;
1293 }
1294
1295 if (gdbarch_software_single_step_p (gdbarch))
1296 {
1297 /* Try to insert the software single step breakpoint.
1298 If insert success, set step to 0. */
1299 set_executing (inferior_ptid, 0);
1300 reinit_frame_cache ();
1301 if (gdbarch_software_single_step (gdbarch,
1302 get_current_frame ()))
1303 step = 0;
1304 set_executing (inferior_ptid, 1);
1305 }
1306
1307 if (record_debug)
1308 fprintf_unfiltered (gdb_stdlog,
1309 "Process record: record_full_wait "
1310 "issuing one more step in the "
1311 "target beneath\n");
1312 record_full_beneath_to_resume
1313 (record_full_beneath_to_resume_ops, ptid, step,
1314 GDB_SIGNAL_0);
1315 continue;
1316 }
1317 }
1318
1319 /* The inferior is broken by a breakpoint or a signal. */
1320 break;
1321 }
1322
1323 return ret;
1324 }
1325 }
1326 else
1327 {
1328 struct regcache *regcache = get_current_regcache ();
1329 struct gdbarch *gdbarch = get_regcache_arch (regcache);
1330 struct address_space *aspace = get_regcache_aspace (regcache);
1331 int continue_flag = 1;
1332 int first_record_full_end = 1;
1333 struct cleanup *old_cleanups
1334 = make_cleanup (record_full_wait_cleanups, 0);
1335 CORE_ADDR tmp_pc;
1336
1337 record_full_hw_watchpoint = 0;
1338 status->kind = TARGET_WAITKIND_STOPPED;
1339
1340 /* Check breakpoint when forward execute. */
1341 if (execution_direction == EXEC_FORWARD)
1342 {
1343 tmp_pc = regcache_read_pc (regcache);
1344 if (breakpoint_inserted_here_p (aspace, tmp_pc))
1345 {
1346 int decr_pc_after_break = gdbarch_decr_pc_after_break (gdbarch);
1347
1348 if (record_debug)
1349 fprintf_unfiltered (gdb_stdlog,
1350 "Process record: break at %s.\n",
1351 paddress (gdbarch, tmp_pc));
1352
1353 if (decr_pc_after_break
1354 && !record_full_resume_step
1355 && software_breakpoint_inserted_here_p (aspace, tmp_pc))
1356 regcache_write_pc (regcache,
1357 tmp_pc + decr_pc_after_break);
1358 goto replay_out;
1359 }
1360 }
1361
1362 /* If GDB is in terminal_inferior mode, it will not get the signal.
1363 And in GDB replay mode, GDB doesn't need to be in terminal_inferior
1364 mode, because inferior will not executed.
1365 Then set it to terminal_ours to make GDB get the signal. */
1366 target_terminal_ours ();
1367
1368 /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
1369 instruction. */
1370 if (execution_direction == EXEC_FORWARD && record_full_list->next)
1371 record_full_list = record_full_list->next;
1372
1373 /* Loop over the record_full_list, looking for the next place to
1374 stop. */
1375 do
1376 {
1377 /* Check for beginning and end of log. */
1378 if (execution_direction == EXEC_REVERSE
1379 && record_full_list == &record_full_first)
1380 {
1381 /* Hit beginning of record log in reverse. */
1382 status->kind = TARGET_WAITKIND_NO_HISTORY;
1383 break;
1384 }
1385 if (execution_direction != EXEC_REVERSE && !record_full_list->next)
1386 {
1387 /* Hit end of record log going forward. */
1388 status->kind = TARGET_WAITKIND_NO_HISTORY;
1389 break;
1390 }
1391
1392 record_full_exec_insn (regcache, gdbarch, record_full_list);
1393
1394 if (record_full_list->type == record_full_end)
1395 {
1396 if (record_debug > 1)
1397 fprintf_unfiltered (gdb_stdlog,
1398 "Process record: record_full_end %s to "
1399 "inferior.\n",
1400 host_address_to_string (record_full_list));
1401
1402 if (first_record_full_end && execution_direction == EXEC_REVERSE)
1403 {
1404 /* When reverse excute, the first record_full_end is the
1405 part of current instruction. */
1406 first_record_full_end = 0;
1407 }
1408 else
1409 {
1410 /* In EXEC_REVERSE mode, this is the record_full_end of prev
1411 instruction.
1412 In EXEC_FORWARD mode, this is the record_full_end of
1413 current instruction. */
1414 /* step */
1415 if (record_full_resume_step)
1416 {
1417 if (record_debug > 1)
1418 fprintf_unfiltered (gdb_stdlog,
1419 "Process record: step.\n");
1420 continue_flag = 0;
1421 }
1422
1423 /* check breakpoint */
1424 tmp_pc = regcache_read_pc (regcache);
1425 if (breakpoint_inserted_here_p (aspace, tmp_pc))
1426 {
1427 int decr_pc_after_break
1428 = gdbarch_decr_pc_after_break (gdbarch);
1429
1430 if (record_debug)
1431 fprintf_unfiltered (gdb_stdlog,
1432 "Process record: break "
1433 "at %s.\n",
1434 paddress (gdbarch, tmp_pc));
1435 if (decr_pc_after_break
1436 && execution_direction == EXEC_FORWARD
1437 && !record_full_resume_step
1438 && software_breakpoint_inserted_here_p (aspace,
1439 tmp_pc))
1440 regcache_write_pc (regcache,
1441 tmp_pc + decr_pc_after_break);
1442 continue_flag = 0;
1443 }
1444
1445 if (record_full_hw_watchpoint)
1446 {
1447 if (record_debug)
1448 fprintf_unfiltered (gdb_stdlog,
1449 "Process record: hit hw "
1450 "watchpoint.\n");
1451 continue_flag = 0;
1452 }
1453 /* Check target signal */
1454 if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1455 /* FIXME: better way to check */
1456 continue_flag = 0;
1457 }
1458 }
1459
1460 if (continue_flag)
1461 {
1462 if (execution_direction == EXEC_REVERSE)
1463 {
1464 if (record_full_list->prev)
1465 record_full_list = record_full_list->prev;
1466 }
1467 else
1468 {
1469 if (record_full_list->next)
1470 record_full_list = record_full_list->next;
1471 }
1472 }
1473 }
1474 while (continue_flag);
1475
1476 replay_out:
1477 if (record_full_get_sig)
1478 status->value.sig = GDB_SIGNAL_INT;
1479 else if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1480 /* FIXME: better way to check */
1481 status->value.sig = record_full_list->u.end.sigval;
1482 else
1483 status->value.sig = GDB_SIGNAL_TRAP;
1484
1485 discard_cleanups (old_cleanups);
1486 }
1487
1488 signal (SIGINT, handle_sigint);
1489
1490 do_cleanups (set_cleanups);
1491 return inferior_ptid;
1492 }
1493
1494 static ptid_t
1495 record_full_wait (struct target_ops *ops,
1496 ptid_t ptid, struct target_waitstatus *status,
1497 int options)
1498 {
1499 ptid_t return_ptid;
1500
1501 return_ptid = record_full_wait_1 (ops, ptid, status, options);
1502 if (status->kind != TARGET_WAITKIND_IGNORE)
1503 {
1504 /* We're reporting a stop. Make sure any spurious
1505 target_wait(WNOHANG) doesn't advance the target until the
1506 core wants us resumed again. */
1507 record_full_resumed = 0;
1508 }
1509 return return_ptid;
1510 }
1511
1512 static int
1513 record_full_stopped_by_watchpoint (void)
1514 {
1515 if (RECORD_FULL_IS_REPLAY)
1516 return record_full_hw_watchpoint;
1517 else
1518 return record_full_beneath_to_stopped_by_watchpoint ();
1519 }
1520
1521 static int
1522 record_full_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
1523 {
1524 if (RECORD_FULL_IS_REPLAY)
1525 return 0;
1526 else
1527 return record_full_beneath_to_stopped_data_address (ops, addr_p);
1528 }
1529
1530 /* Record registers change (by user or by GDB) to list as an instruction. */
1531
1532 static void
1533 record_full_registers_change (struct regcache *regcache, int regnum)
1534 {
1535 /* Check record_full_insn_num. */
1536 record_full_check_insn_num (0);
1537
1538 record_full_arch_list_head = NULL;
1539 record_full_arch_list_tail = NULL;
1540
1541 if (regnum < 0)
1542 {
1543 int i;
1544
1545 for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
1546 {
1547 if (record_full_arch_list_add_reg (regcache, i))
1548 {
1549 record_full_list_release (record_full_arch_list_tail);
1550 error (_("Process record: failed to record execution log."));
1551 }
1552 }
1553 }
1554 else
1555 {
1556 if (record_full_arch_list_add_reg (regcache, regnum))
1557 {
1558 record_full_list_release (record_full_arch_list_tail);
1559 error (_("Process record: failed to record execution log."));
1560 }
1561 }
1562 if (record_full_arch_list_add_end ())
1563 {
1564 record_full_list_release (record_full_arch_list_tail);
1565 error (_("Process record: failed to record execution log."));
1566 }
1567 record_full_list->next = record_full_arch_list_head;
1568 record_full_arch_list_head->prev = record_full_list;
1569 record_full_list = record_full_arch_list_tail;
1570
1571 if (record_full_insn_num == record_full_insn_max_num)
1572 record_full_list_release_first ();
1573 else
1574 record_full_insn_num++;
1575 }
1576
1577 /* "to_store_registers" method for process record target. */
1578
1579 static void
1580 record_full_store_registers (struct target_ops *ops,
1581 struct regcache *regcache,
1582 int regno)
1583 {
1584 if (!record_full_gdb_operation_disable)
1585 {
1586 if (RECORD_FULL_IS_REPLAY)
1587 {
1588 int n;
1589
1590 /* Let user choose if he wants to write register or not. */
1591 if (regno < 0)
1592 n =
1593 query (_("Because GDB is in replay mode, changing the "
1594 "value of a register will make the execution "
1595 "log unusable from this point onward. "
1596 "Change all registers?"));
1597 else
1598 n =
1599 query (_("Because GDB is in replay mode, changing the value "
1600 "of a register will make the execution log unusable "
1601 "from this point onward. Change register %s?"),
1602 gdbarch_register_name (get_regcache_arch (regcache),
1603 regno));
1604
1605 if (!n)
1606 {
1607 /* Invalidate the value of regcache that was set in function
1608 "regcache_raw_write". */
1609 if (regno < 0)
1610 {
1611 int i;
1612
1613 for (i = 0;
1614 i < gdbarch_num_regs (get_regcache_arch (regcache));
1615 i++)
1616 regcache_invalidate (regcache, i);
1617 }
1618 else
1619 regcache_invalidate (regcache, regno);
1620
1621 error (_("Process record canceled the operation."));
1622 }
1623
1624 /* Destroy the record from here forward. */
1625 record_full_list_release_following (record_full_list);
1626 }
1627
1628 record_full_registers_change (regcache, regno);
1629 }
1630 record_full_beneath_to_store_registers
1631 (record_full_beneath_to_store_registers_ops, regcache, regno);
1632 }
1633
1634 /* "to_xfer_partial" method. Behavior is conditional on
1635 RECORD_FULL_IS_REPLAY.
1636 In replay mode, we cannot write memory unles we are willing to
1637 invalidate the record/replay log from this point forward. */
1638
1639 static LONGEST
1640 record_full_xfer_partial (struct target_ops *ops, enum target_object object,
1641 const char *annex, gdb_byte *readbuf,
1642 const gdb_byte *writebuf, ULONGEST offset,
1643 LONGEST len)
1644 {
1645 if (!record_full_gdb_operation_disable
1646 && (object == TARGET_OBJECT_MEMORY
1647 || object == TARGET_OBJECT_RAW_MEMORY) && writebuf)
1648 {
1649 if (RECORD_FULL_IS_REPLAY)
1650 {
1651 /* Let user choose if he wants to write memory or not. */
1652 if (!query (_("Because GDB is in replay mode, writing to memory "
1653 "will make the execution log unusable from this "
1654 "point onward. Write memory at address %s?"),
1655 paddress (target_gdbarch (), offset)))
1656 error (_("Process record canceled the operation."));
1657
1658 /* Destroy the record from here forward. */
1659 record_full_list_release_following (record_full_list);
1660 }
1661
1662 /* Check record_full_insn_num */
1663 record_full_check_insn_num (0);
1664
1665 /* Record registers change to list as an instruction. */
1666 record_full_arch_list_head = NULL;
1667 record_full_arch_list_tail = NULL;
1668 if (record_full_arch_list_add_mem (offset, len))
1669 {
1670 record_full_list_release (record_full_arch_list_tail);
1671 if (record_debug)
1672 fprintf_unfiltered (gdb_stdlog,
1673 "Process record: failed to record "
1674 "execution log.");
1675 return -1;
1676 }
1677 if (record_full_arch_list_add_end ())
1678 {
1679 record_full_list_release (record_full_arch_list_tail);
1680 if (record_debug)
1681 fprintf_unfiltered (gdb_stdlog,
1682 "Process record: failed to record "
1683 "execution log.");
1684 return -1;
1685 }
1686 record_full_list->next = record_full_arch_list_head;
1687 record_full_arch_list_head->prev = record_full_list;
1688 record_full_list = record_full_arch_list_tail;
1689
1690 if (record_full_insn_num == record_full_insn_max_num)
1691 record_full_list_release_first ();
1692 else
1693 record_full_insn_num++;
1694 }
1695
1696 return record_full_beneath_to_xfer_partial
1697 (record_full_beneath_to_xfer_partial_ops, object, annex,
1698 readbuf, writebuf, offset, len);
1699 }
1700
1701 /* This structure represents a breakpoint inserted while the record
1702 target is active. We use this to know when to install/remove
1703 breakpoints in/from the target beneath. For example, a breakpoint
1704 may be inserted while recording, but removed when not replaying nor
1705 recording. In that case, the breakpoint had not been inserted on
1706 the target beneath, so we should not try to remove it there. */
1707
1708 struct record_full_breakpoint
1709 {
1710 /* The address and address space the breakpoint was set at. */
1711 struct address_space *address_space;
1712 CORE_ADDR addr;
1713
1714 /* True when the breakpoint has been also installed in the target
1715 beneath. This will be false for breakpoints set during replay or
1716 when recording. */
1717 int in_target_beneath;
1718 };
1719
1720 typedef struct record_full_breakpoint *record_full_breakpoint_p;
1721 DEF_VEC_P(record_full_breakpoint_p);
1722
1723 /* The list of breakpoints inserted while the record target is
1724 active. */
1725 VEC(record_full_breakpoint_p) *record_full_breakpoints = NULL;
1726
1727 static void
1728 record_full_sync_record_breakpoints (struct bp_location *loc, void *data)
1729 {
1730 if (loc->loc_type != bp_loc_software_breakpoint)
1731 return;
1732
1733 if (loc->inserted)
1734 {
1735 struct record_full_breakpoint *bp = XNEW (struct record_full_breakpoint);
1736
1737 bp->addr = loc->target_info.placed_address;
1738 bp->address_space = loc->target_info.placed_address_space;
1739
1740 bp->in_target_beneath = 1;
1741
1742 VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1743 }
1744 }
1745
1746 /* Sync existing breakpoints to record_full_breakpoints. */
1747
1748 static void
1749 record_full_init_record_breakpoints (void)
1750 {
1751 VEC_free (record_full_breakpoint_p, record_full_breakpoints);
1752
1753 iterate_over_bp_locations (record_full_sync_record_breakpoints);
1754 }
1755
1756 /* Behavior is conditional on RECORD_FULL_IS_REPLAY. We will not actually
1757 insert or remove breakpoints in the real target when replaying, nor
1758 when recording. */
1759
1760 static int
1761 record_full_insert_breakpoint (struct gdbarch *gdbarch,
1762 struct bp_target_info *bp_tgt)
1763 {
1764 struct record_full_breakpoint *bp;
1765 int in_target_beneath = 0;
1766
1767 if (!RECORD_FULL_IS_REPLAY)
1768 {
1769 /* When recording, we currently always single-step, so we don't
1770 really need to install regular breakpoints in the inferior.
1771 However, we do have to insert software single-step
1772 breakpoints, in case the target can't hardware step. To keep
1773 things single, we always insert. */
1774 struct cleanup *old_cleanups;
1775 int ret;
1776
1777 old_cleanups = record_full_gdb_operation_disable_set ();
1778 ret = record_full_beneath_to_insert_breakpoint (gdbarch, bp_tgt);
1779 do_cleanups (old_cleanups);
1780
1781 if (ret != 0)
1782 return ret;
1783
1784 in_target_beneath = 1;
1785 }
1786
1787 bp = XNEW (struct record_full_breakpoint);
1788 bp->addr = bp_tgt->placed_address;
1789 bp->address_space = bp_tgt->placed_address_space;
1790 bp->in_target_beneath = in_target_beneath;
1791 VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1792 return 0;
1793 }
1794
1795 /* "to_remove_breakpoint" method for process record target. */
1796
1797 static int
1798 record_full_remove_breakpoint (struct gdbarch *gdbarch,
1799 struct bp_target_info *bp_tgt)
1800 {
1801 struct record_full_breakpoint *bp;
1802 int ix;
1803
1804 for (ix = 0;
1805 VEC_iterate (record_full_breakpoint_p,
1806 record_full_breakpoints, ix, bp);
1807 ++ix)
1808 {
1809 if (bp->addr == bp_tgt->placed_address
1810 && bp->address_space == bp_tgt->placed_address_space)
1811 {
1812 if (bp->in_target_beneath)
1813 {
1814 struct cleanup *old_cleanups;
1815 int ret;
1816
1817 old_cleanups = record_full_gdb_operation_disable_set ();
1818 ret = record_full_beneath_to_remove_breakpoint (gdbarch, bp_tgt);
1819 do_cleanups (old_cleanups);
1820
1821 if (ret != 0)
1822 return ret;
1823 }
1824
1825 VEC_unordered_remove (record_full_breakpoint_p,
1826 record_full_breakpoints, ix);
1827 return 0;
1828 }
1829 }
1830
1831 gdb_assert_not_reached ("removing unknown breakpoint");
1832 }
1833
1834 /* "to_can_execute_reverse" method for process record target. */
1835
1836 static int
1837 record_full_can_execute_reverse (void)
1838 {
1839 return 1;
1840 }
1841
1842 /* "to_get_bookmark" method for process record and prec over core. */
1843
1844 static gdb_byte *
1845 record_full_get_bookmark (char *args, int from_tty)
1846 {
1847 char *ret = NULL;
1848
1849 /* Return stringified form of instruction count. */
1850 if (record_full_list && record_full_list->type == record_full_end)
1851 ret = xstrdup (pulongest (record_full_list->u.end.insn_num));
1852
1853 if (record_debug)
1854 {
1855 if (ret)
1856 fprintf_unfiltered (gdb_stdlog,
1857 "record_full_get_bookmark returns %s\n", ret);
1858 else
1859 fprintf_unfiltered (gdb_stdlog,
1860 "record_full_get_bookmark returns NULL\n");
1861 }
1862 return (gdb_byte *) ret;
1863 }
1864
1865 /* "to_goto_bookmark" method for process record and prec over core. */
1866
1867 static void
1868 record_full_goto_bookmark (gdb_byte *raw_bookmark, int from_tty)
1869 {
1870 char *bookmark = (char *) raw_bookmark;
1871
1872 if (record_debug)
1873 fprintf_unfiltered (gdb_stdlog,
1874 "record_full_goto_bookmark receives %s\n", bookmark);
1875
1876 if (bookmark[0] == '\'' || bookmark[0] == '\"')
1877 {
1878 if (bookmark[strlen (bookmark) - 1] != bookmark[0])
1879 error (_("Unbalanced quotes: %s"), bookmark);
1880
1881 /* Strip trailing quote. */
1882 bookmark[strlen (bookmark) - 1] = '\0';
1883 /* Strip leading quote. */
1884 bookmark++;
1885 /* Pass along to cmd_record_full_goto. */
1886 }
1887
1888 cmd_record_goto (bookmark, from_tty);
1889 return;
1890 }
1891
1892 static void
1893 record_full_async (void (*callback) (enum inferior_event_type event_type,
1894 void *context), void *context)
1895 {
1896 /* If we're on top of a line target (e.g., linux-nat, remote), then
1897 set it to async mode as well. Will be NULL if we're sitting on
1898 top of the core target, for "record restore". */
1899 if (record_full_beneath_to_async != NULL)
1900 record_full_beneath_to_async (callback, context);
1901 }
1902
1903 static int
1904 record_full_can_async_p (void)
1905 {
1906 /* We only enable async when the user specifically asks for it. */
1907 return target_async_permitted;
1908 }
1909
1910 static int
1911 record_full_is_async_p (void)
1912 {
1913 /* We only enable async when the user specifically asks for it. */
1914 return target_async_permitted;
1915 }
1916
1917 static enum exec_direction_kind
1918 record_full_execution_direction (void)
1919 {
1920 return record_full_execution_dir;
1921 }
1922
1923 static void
1924 record_full_info (void)
1925 {
1926 struct record_full_entry *p;
1927
1928 if (RECORD_FULL_IS_REPLAY)
1929 printf_filtered (_("Replay mode:\n"));
1930 else
1931 printf_filtered (_("Record mode:\n"));
1932
1933 /* Find entry for first actual instruction in the log. */
1934 for (p = record_full_first.next;
1935 p != NULL && p->type != record_full_end;
1936 p = p->next)
1937 ;
1938
1939 /* Do we have a log at all? */
1940 if (p != NULL && p->type == record_full_end)
1941 {
1942 /* Display instruction number for first instruction in the log. */
1943 printf_filtered (_("Lowest recorded instruction number is %s.\n"),
1944 pulongest (p->u.end.insn_num));
1945
1946 /* If in replay mode, display where we are in the log. */
1947 if (RECORD_FULL_IS_REPLAY)
1948 printf_filtered (_("Current instruction number is %s.\n"),
1949 pulongest (record_full_list->u.end.insn_num));
1950
1951 /* Display instruction number for last instruction in the log. */
1952 printf_filtered (_("Highest recorded instruction number is %s.\n"),
1953 pulongest (record_full_insn_count));
1954
1955 /* Display log count. */
1956 printf_filtered (_("Log contains %u instructions.\n"),
1957 record_full_insn_num);
1958 }
1959 else
1960 printf_filtered (_("No instructions have been logged.\n"));
1961
1962 /* Display max log size. */
1963 printf_filtered (_("Max logged instructions is %u.\n"),
1964 record_full_insn_max_num);
1965 }
1966
1967 /* The "to_record_delete" target method. */
1968
1969 static void
1970 record_full_delete (void)
1971 {
1972 record_full_list_release_following (record_full_list);
1973 }
1974
1975 /* The "to_record_is_replaying" target method. */
1976
1977 static int
1978 record_full_is_replaying (void)
1979 {
1980 return RECORD_FULL_IS_REPLAY;
1981 }
1982
1983 /* Go to a specific entry. */
1984
1985 static void
1986 record_full_goto_entry (struct record_full_entry *p)
1987 {
1988 if (p == NULL)
1989 error (_("Target insn not found."));
1990 else if (p == record_full_list)
1991 error (_("Already at target insn."));
1992 else if (p->u.end.insn_num > record_full_list->u.end.insn_num)
1993 {
1994 printf_filtered (_("Go forward to insn number %s\n"),
1995 pulongest (p->u.end.insn_num));
1996 record_full_goto_insn (p, EXEC_FORWARD);
1997 }
1998 else
1999 {
2000 printf_filtered (_("Go backward to insn number %s\n"),
2001 pulongest (p->u.end.insn_num));
2002 record_full_goto_insn (p, EXEC_REVERSE);
2003 }
2004
2005 registers_changed ();
2006 reinit_frame_cache ();
2007 print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC);
2008 }
2009
2010 /* The "to_goto_record_begin" target method. */
2011
2012 static void
2013 record_full_goto_begin (void)
2014 {
2015 struct record_full_entry *p = NULL;
2016
2017 for (p = &record_full_first; p != NULL; p = p->next)
2018 if (p->type == record_full_end)
2019 break;
2020
2021 record_full_goto_entry (p);
2022 }
2023
2024 /* The "to_goto_record_end" target method. */
2025
2026 static void
2027 record_full_goto_end (void)
2028 {
2029 struct record_full_entry *p = NULL;
2030
2031 for (p = record_full_list; p->next != NULL; p = p->next)
2032 ;
2033 for (; p!= NULL; p = p->prev)
2034 if (p->type == record_full_end)
2035 break;
2036
2037 record_full_goto_entry (p);
2038 }
2039
2040 /* The "to_goto_record" target method. */
2041
2042 static void
2043 record_full_goto (ULONGEST target_insn)
2044 {
2045 struct record_full_entry *p = NULL;
2046
2047 for (p = &record_full_first; p != NULL; p = p->next)
2048 if (p->type == record_full_end && p->u.end.insn_num == target_insn)
2049 break;
2050
2051 record_full_goto_entry (p);
2052 }
2053
2054 static void
2055 init_record_full_ops (void)
2056 {
2057 record_full_ops.to_shortname = "record-full";
2058 record_full_ops.to_longname = "Process record and replay target";
2059 record_full_ops.to_doc =
2060 "Log program while executing and replay execution from log.";
2061 record_full_ops.to_open = record_full_open;
2062 record_full_ops.to_close = record_full_close;
2063 record_full_ops.to_resume = record_full_resume;
2064 record_full_ops.to_wait = record_full_wait;
2065 record_full_ops.to_disconnect = record_disconnect;
2066 record_full_ops.to_detach = record_detach;
2067 record_full_ops.to_mourn_inferior = record_mourn_inferior;
2068 record_full_ops.to_kill = record_kill;
2069 record_full_ops.to_create_inferior = find_default_create_inferior;
2070 record_full_ops.to_store_registers = record_full_store_registers;
2071 record_full_ops.to_xfer_partial = record_full_xfer_partial;
2072 record_full_ops.to_insert_breakpoint = record_full_insert_breakpoint;
2073 record_full_ops.to_remove_breakpoint = record_full_remove_breakpoint;
2074 record_full_ops.to_stopped_by_watchpoint = record_full_stopped_by_watchpoint;
2075 record_full_ops.to_stopped_data_address = record_full_stopped_data_address;
2076 record_full_ops.to_can_execute_reverse = record_full_can_execute_reverse;
2077 record_full_ops.to_stratum = record_stratum;
2078 /* Add bookmark target methods. */
2079 record_full_ops.to_get_bookmark = record_full_get_bookmark;
2080 record_full_ops.to_goto_bookmark = record_full_goto_bookmark;
2081 record_full_ops.to_async = record_full_async;
2082 record_full_ops.to_can_async_p = record_full_can_async_p;
2083 record_full_ops.to_is_async_p = record_full_is_async_p;
2084 record_full_ops.to_execution_direction = record_full_execution_direction;
2085 record_full_ops.to_info_record = record_full_info;
2086 record_full_ops.to_save_record = record_full_save;
2087 record_full_ops.to_delete_record = record_full_delete;
2088 record_full_ops.to_record_is_replaying = record_full_is_replaying;
2089 record_full_ops.to_goto_record_begin = record_full_goto_begin;
2090 record_full_ops.to_goto_record_end = record_full_goto_end;
2091 record_full_ops.to_goto_record = record_full_goto;
2092 record_full_ops.to_magic = OPS_MAGIC;
2093 }
2094
2095 /* "to_resume" method for prec over corefile. */
2096
2097 static void
2098 record_full_core_resume (struct target_ops *ops, ptid_t ptid, int step,
2099 enum gdb_signal signal)
2100 {
2101 record_full_resume_step = step;
2102 record_full_resumed = 1;
2103 record_full_execution_dir = execution_direction;
2104
2105 /* We are about to start executing the inferior (or simulate it),
2106 let's register it with the event loop. */
2107 if (target_can_async_p ())
2108 {
2109 target_async (inferior_event_handler, 0);
2110
2111 /* Notify the event loop there's an event to wait for. */
2112 mark_async_event_handler (record_full_async_inferior_event_token);
2113 }
2114 }
2115
2116 /* "to_kill" method for prec over corefile. */
2117
2118 static void
2119 record_full_core_kill (struct target_ops *ops)
2120 {
2121 if (record_debug)
2122 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_core_kill\n");
2123
2124 unpush_target (&record_full_core_ops);
2125 }
2126
2127 /* "to_fetch_registers" method for prec over corefile. */
2128
2129 static void
2130 record_full_core_fetch_registers (struct target_ops *ops,
2131 struct regcache *regcache,
2132 int regno)
2133 {
2134 if (regno < 0)
2135 {
2136 int num = gdbarch_num_regs (get_regcache_arch (regcache));
2137 int i;
2138
2139 for (i = 0; i < num; i ++)
2140 regcache_raw_supply (regcache, i,
2141 record_full_core_regbuf + MAX_REGISTER_SIZE * i);
2142 }
2143 else
2144 regcache_raw_supply (regcache, regno,
2145 record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2146 }
2147
2148 /* "to_prepare_to_store" method for prec over corefile. */
2149
2150 static void
2151 record_full_core_prepare_to_store (struct regcache *regcache)
2152 {
2153 }
2154
2155 /* "to_store_registers" method for prec over corefile. */
2156
2157 static void
2158 record_full_core_store_registers (struct target_ops *ops,
2159 struct regcache *regcache,
2160 int regno)
2161 {
2162 if (record_full_gdb_operation_disable)
2163 regcache_raw_collect (regcache, regno,
2164 record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2165 else
2166 error (_("You can't do that without a process to debug."));
2167 }
2168
2169 /* "to_xfer_partial" method for prec over corefile. */
2170
2171 static LONGEST
2172 record_full_core_xfer_partial (struct target_ops *ops,
2173 enum target_object object,
2174 const char *annex, gdb_byte *readbuf,
2175 const gdb_byte *writebuf, ULONGEST offset,
2176 LONGEST len)
2177 {
2178 if (object == TARGET_OBJECT_MEMORY)
2179 {
2180 if (record_full_gdb_operation_disable || !writebuf)
2181 {
2182 struct target_section *p;
2183
2184 for (p = record_full_core_start; p < record_full_core_end; p++)
2185 {
2186 if (offset >= p->addr)
2187 {
2188 struct record_full_core_buf_entry *entry;
2189 ULONGEST sec_offset;
2190
2191 if (offset >= p->endaddr)
2192 continue;
2193
2194 if (offset + len > p->endaddr)
2195 len = p->endaddr - offset;
2196
2197 sec_offset = offset - p->addr;
2198
2199 /* Read readbuf or write writebuf p, offset, len. */
2200 /* Check flags. */
2201 if (p->the_bfd_section->flags & SEC_CONSTRUCTOR
2202 || (p->the_bfd_section->flags & SEC_HAS_CONTENTS) == 0)
2203 {
2204 if (readbuf)
2205 memset (readbuf, 0, len);
2206 return len;
2207 }
2208 /* Get record_full_core_buf_entry. */
2209 for (entry = record_full_core_buf_list; entry;
2210 entry = entry->prev)
2211 if (entry->p == p)
2212 break;
2213 if (writebuf)
2214 {
2215 if (!entry)
2216 {
2217 /* Add a new entry. */
2218 entry = (struct record_full_core_buf_entry *)
2219 xmalloc
2220 (sizeof (struct record_full_core_buf_entry));
2221 entry->p = p;
2222 if (!bfd_malloc_and_get_section (p->bfd,
2223 p->the_bfd_section,
2224 &entry->buf))
2225 {
2226 xfree (entry);
2227 return 0;
2228 }
2229 entry->prev = record_full_core_buf_list;
2230 record_full_core_buf_list = entry;
2231 }
2232
2233 memcpy (entry->buf + sec_offset, writebuf,
2234 (size_t) len);
2235 }
2236 else
2237 {
2238 if (!entry)
2239 return record_full_beneath_to_xfer_partial
2240 (record_full_beneath_to_xfer_partial_ops,
2241 object, annex, readbuf, writebuf,
2242 offset, len);
2243
2244 memcpy (readbuf, entry->buf + sec_offset,
2245 (size_t) len);
2246 }
2247
2248 return len;
2249 }
2250 }
2251
2252 return -1;
2253 }
2254 else
2255 error (_("You can't do that without a process to debug."));
2256 }
2257
2258 return record_full_beneath_to_xfer_partial
2259 (record_full_beneath_to_xfer_partial_ops, object, annex,
2260 readbuf, writebuf, offset, len);
2261 }
2262
2263 /* "to_insert_breakpoint" method for prec over corefile. */
2264
2265 static int
2266 record_full_core_insert_breakpoint (struct gdbarch *gdbarch,
2267 struct bp_target_info *bp_tgt)
2268 {
2269 return 0;
2270 }
2271
2272 /* "to_remove_breakpoint" method for prec over corefile. */
2273
2274 static int
2275 record_full_core_remove_breakpoint (struct gdbarch *gdbarch,
2276 struct bp_target_info *bp_tgt)
2277 {
2278 return 0;
2279 }
2280
2281 /* "to_has_execution" method for prec over corefile. */
2282
2283 static int
2284 record_full_core_has_execution (struct target_ops *ops, ptid_t the_ptid)
2285 {
2286 return 1;
2287 }
2288
2289 static void
2290 init_record_full_core_ops (void)
2291 {
2292 record_full_core_ops.to_shortname = "record-core";
2293 record_full_core_ops.to_longname = "Process record and replay target";
2294 record_full_core_ops.to_doc =
2295 "Log program while executing and replay execution from log.";
2296 record_full_core_ops.to_open = record_full_open;
2297 record_full_core_ops.to_close = record_full_close;
2298 record_full_core_ops.to_resume = record_full_core_resume;
2299 record_full_core_ops.to_wait = record_full_wait;
2300 record_full_core_ops.to_kill = record_full_core_kill;
2301 record_full_core_ops.to_fetch_registers = record_full_core_fetch_registers;
2302 record_full_core_ops.to_prepare_to_store = record_full_core_prepare_to_store;
2303 record_full_core_ops.to_store_registers = record_full_core_store_registers;
2304 record_full_core_ops.to_xfer_partial = record_full_core_xfer_partial;
2305 record_full_core_ops.to_insert_breakpoint
2306 = record_full_core_insert_breakpoint;
2307 record_full_core_ops.to_remove_breakpoint
2308 = record_full_core_remove_breakpoint;
2309 record_full_core_ops.to_stopped_by_watchpoint
2310 = record_full_stopped_by_watchpoint;
2311 record_full_core_ops.to_stopped_data_address
2312 = record_full_stopped_data_address;
2313 record_full_core_ops.to_can_execute_reverse
2314 = record_full_can_execute_reverse;
2315 record_full_core_ops.to_has_execution = record_full_core_has_execution;
2316 record_full_core_ops.to_stratum = record_stratum;
2317 /* Add bookmark target methods. */
2318 record_full_core_ops.to_get_bookmark = record_full_get_bookmark;
2319 record_full_core_ops.to_goto_bookmark = record_full_goto_bookmark;
2320 record_full_core_ops.to_async = record_full_async;
2321 record_full_core_ops.to_can_async_p = record_full_can_async_p;
2322 record_full_core_ops.to_is_async_p = record_full_is_async_p;
2323 record_full_core_ops.to_execution_direction
2324 = record_full_execution_direction;
2325 record_full_core_ops.to_info_record = record_full_info;
2326 record_full_core_ops.to_delete_record = record_full_delete;
2327 record_full_core_ops.to_record_is_replaying = record_full_is_replaying;
2328 record_full_core_ops.to_goto_record_begin = record_full_goto_begin;
2329 record_full_core_ops.to_goto_record_end = record_full_goto_end;
2330 record_full_core_ops.to_goto_record = record_full_goto;
2331 record_full_core_ops.to_magic = OPS_MAGIC;
2332 }
2333
2334 /* Record log save-file format
2335 Version 1 (never released)
2336
2337 Header:
2338 4 bytes: magic number htonl(0x20090829).
2339 NOTE: be sure to change whenever this file format changes!
2340
2341 Records:
2342 record_full_end:
2343 1 byte: record type (record_full_end, see enum record_full_type).
2344 record_full_reg:
2345 1 byte: record type (record_full_reg, see enum record_full_type).
2346 8 bytes: register id (network byte order).
2347 MAX_REGISTER_SIZE bytes: register value.
2348 record_full_mem:
2349 1 byte: record type (record_full_mem, see enum record_full_type).
2350 8 bytes: memory length (network byte order).
2351 8 bytes: memory address (network byte order).
2352 n bytes: memory value (n == memory length).
2353
2354 Version 2
2355 4 bytes: magic number netorder32(0x20091016).
2356 NOTE: be sure to change whenever this file format changes!
2357
2358 Records:
2359 record_full_end:
2360 1 byte: record type (record_full_end, see enum record_full_type).
2361 4 bytes: signal
2362 4 bytes: instruction count
2363 record_full_reg:
2364 1 byte: record type (record_full_reg, see enum record_full_type).
2365 4 bytes: register id (network byte order).
2366 n bytes: register value (n == actual register size).
2367 (eg. 4 bytes for x86 general registers).
2368 record_full_mem:
2369 1 byte: record type (record_full_mem, see enum record_full_type).
2370 4 bytes: memory length (network byte order).
2371 8 bytes: memory address (network byte order).
2372 n bytes: memory value (n == memory length).
2373
2374 */
2375
2376 /* bfdcore_read -- read bytes from a core file section. */
2377
2378 static inline void
2379 bfdcore_read (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2380 {
2381 int ret = bfd_get_section_contents (obfd, osec, buf, *offset, len);
2382
2383 if (ret)
2384 *offset += len;
2385 else
2386 error (_("Failed to read %d bytes from core file %s ('%s')."),
2387 len, bfd_get_filename (obfd),
2388 bfd_errmsg (bfd_get_error ()));
2389 }
2390
2391 static inline uint64_t
2392 netorder64 (uint64_t input)
2393 {
2394 uint64_t ret;
2395
2396 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2397 BFD_ENDIAN_BIG, input);
2398 return ret;
2399 }
2400
2401 static inline uint32_t
2402 netorder32 (uint32_t input)
2403 {
2404 uint32_t ret;
2405
2406 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2407 BFD_ENDIAN_BIG, input);
2408 return ret;
2409 }
2410
2411 static inline uint16_t
2412 netorder16 (uint16_t input)
2413 {
2414 uint16_t ret;
2415
2416 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2417 BFD_ENDIAN_BIG, input);
2418 return ret;
2419 }
2420
2421 /* Restore the execution log from a core_bfd file. */
2422 static void
2423 record_full_restore (void)
2424 {
2425 uint32_t magic;
2426 struct cleanup *old_cleanups;
2427 struct record_full_entry *rec;
2428 asection *osec;
2429 uint32_t osec_size;
2430 int bfd_offset = 0;
2431 struct regcache *regcache;
2432
2433 /* We restore the execution log from the open core bfd,
2434 if there is one. */
2435 if (core_bfd == NULL)
2436 return;
2437
2438 /* "record_full_restore" can only be called when record list is empty. */
2439 gdb_assert (record_full_first.next == NULL);
2440
2441 if (record_debug)
2442 fprintf_unfiltered (gdb_stdlog, "Restoring recording from core file.\n");
2443
2444 /* Now need to find our special note section. */
2445 osec = bfd_get_section_by_name (core_bfd, "null0");
2446 if (record_debug)
2447 fprintf_unfiltered (gdb_stdlog, "Find precord section %s.\n",
2448 osec ? "succeeded" : "failed");
2449 if (osec == NULL)
2450 return;
2451 osec_size = bfd_section_size (core_bfd, osec);
2452 if (record_debug)
2453 fprintf_unfiltered (gdb_stdlog, "%s", bfd_section_name (core_bfd, osec));
2454
2455 /* Check the magic code. */
2456 bfdcore_read (core_bfd, osec, &magic, sizeof (magic), &bfd_offset);
2457 if (magic != RECORD_FULL_FILE_MAGIC)
2458 error (_("Version mis-match or file format error in core file %s."),
2459 bfd_get_filename (core_bfd));
2460 if (record_debug)
2461 fprintf_unfiltered (gdb_stdlog,
2462 " Reading 4-byte magic cookie "
2463 "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2464 phex_nz (netorder32 (magic), 4));
2465
2466 /* Restore the entries in recfd into record_full_arch_list_head and
2467 record_full_arch_list_tail. */
2468 record_full_arch_list_head = NULL;
2469 record_full_arch_list_tail = NULL;
2470 record_full_insn_num = 0;
2471 old_cleanups = make_cleanup (record_full_arch_list_cleanups, 0);
2472 regcache = get_current_regcache ();
2473
2474 while (1)
2475 {
2476 uint8_t rectype;
2477 uint32_t regnum, len, signal, count;
2478 uint64_t addr;
2479
2480 /* We are finished when offset reaches osec_size. */
2481 if (bfd_offset >= osec_size)
2482 break;
2483 bfdcore_read (core_bfd, osec, &rectype, sizeof (rectype), &bfd_offset);
2484
2485 switch (rectype)
2486 {
2487 case record_full_reg: /* reg */
2488 /* Get register number to regnum. */
2489 bfdcore_read (core_bfd, osec, &regnum,
2490 sizeof (regnum), &bfd_offset);
2491 regnum = netorder32 (regnum);
2492
2493 rec = record_full_reg_alloc (regcache, regnum);
2494
2495 /* Get val. */
2496 bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2497 rec->u.reg.len, &bfd_offset);
2498
2499 if (record_debug)
2500 fprintf_unfiltered (gdb_stdlog,
2501 " Reading register %d (1 "
2502 "plus %lu plus %d bytes)\n",
2503 rec->u.reg.num,
2504 (unsigned long) sizeof (regnum),
2505 rec->u.reg.len);
2506 break;
2507
2508 case record_full_mem: /* mem */
2509 /* Get len. */
2510 bfdcore_read (core_bfd, osec, &len,
2511 sizeof (len), &bfd_offset);
2512 len = netorder32 (len);
2513
2514 /* Get addr. */
2515 bfdcore_read (core_bfd, osec, &addr,
2516 sizeof (addr), &bfd_offset);
2517 addr = netorder64 (addr);
2518
2519 rec = record_full_mem_alloc (addr, len);
2520
2521 /* Get val. */
2522 bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2523 rec->u.mem.len, &bfd_offset);
2524
2525 if (record_debug)
2526 fprintf_unfiltered (gdb_stdlog,
2527 " Reading memory %s (1 plus "
2528 "%lu plus %lu plus %d bytes)\n",
2529 paddress (get_current_arch (),
2530 rec->u.mem.addr),
2531 (unsigned long) sizeof (addr),
2532 (unsigned long) sizeof (len),
2533 rec->u.mem.len);
2534 break;
2535
2536 case record_full_end: /* end */
2537 rec = record_full_end_alloc ();
2538 record_full_insn_num ++;
2539
2540 /* Get signal value. */
2541 bfdcore_read (core_bfd, osec, &signal,
2542 sizeof (signal), &bfd_offset);
2543 signal = netorder32 (signal);
2544 rec->u.end.sigval = signal;
2545
2546 /* Get insn count. */
2547 bfdcore_read (core_bfd, osec, &count,
2548 sizeof (count), &bfd_offset);
2549 count = netorder32 (count);
2550 rec->u.end.insn_num = count;
2551 record_full_insn_count = count + 1;
2552 if (record_debug)
2553 fprintf_unfiltered (gdb_stdlog,
2554 " Reading record_full_end (1 + "
2555 "%lu + %lu bytes), offset == %s\n",
2556 (unsigned long) sizeof (signal),
2557 (unsigned long) sizeof (count),
2558 paddress (get_current_arch (),
2559 bfd_offset));
2560 break;
2561
2562 default:
2563 error (_("Bad entry type in core file %s."),
2564 bfd_get_filename (core_bfd));
2565 break;
2566 }
2567
2568 /* Add rec to record arch list. */
2569 record_full_arch_list_add (rec);
2570 }
2571
2572 discard_cleanups (old_cleanups);
2573
2574 /* Add record_full_arch_list_head to the end of record list. */
2575 record_full_first.next = record_full_arch_list_head;
2576 record_full_arch_list_head->prev = &record_full_first;
2577 record_full_arch_list_tail->next = NULL;
2578 record_full_list = &record_full_first;
2579
2580 /* Update record_full_insn_max_num. */
2581 if (record_full_insn_num > record_full_insn_max_num)
2582 {
2583 record_full_insn_max_num = record_full_insn_num;
2584 warning (_("Auto increase record/replay buffer limit to %u."),
2585 record_full_insn_max_num);
2586 }
2587
2588 /* Succeeded. */
2589 printf_filtered (_("Restored records from core file %s.\n"),
2590 bfd_get_filename (core_bfd));
2591
2592 print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC);
2593 }
2594
2595 /* bfdcore_write -- write bytes into a core file section. */
2596
2597 static inline void
2598 bfdcore_write (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2599 {
2600 int ret = bfd_set_section_contents (obfd, osec, buf, *offset, len);
2601
2602 if (ret)
2603 *offset += len;
2604 else
2605 error (_("Failed to write %d bytes to core file %s ('%s')."),
2606 len, bfd_get_filename (obfd),
2607 bfd_errmsg (bfd_get_error ()));
2608 }
2609
2610 /* Restore the execution log from a file. We use a modified elf
2611 corefile format, with an extra section for our data. */
2612
2613 static void
2614 cmd_record_full_restore (char *args, int from_tty)
2615 {
2616 core_file_command (args, from_tty);
2617 record_full_open (args, from_tty);
2618 }
2619
2620 static void
2621 record_full_save_cleanups (void *data)
2622 {
2623 bfd *obfd = data;
2624 char *pathname = xstrdup (bfd_get_filename (obfd));
2625
2626 gdb_bfd_unref (obfd);
2627 unlink (pathname);
2628 xfree (pathname);
2629 }
2630
2631 /* Save the execution log to a file. We use a modified elf corefile
2632 format, with an extra section for our data. */
2633
2634 static void
2635 record_full_save (char *recfilename)
2636 {
2637 struct record_full_entry *cur_record_full_list;
2638 uint32_t magic;
2639 struct regcache *regcache;
2640 struct gdbarch *gdbarch;
2641 struct cleanup *old_cleanups;
2642 struct cleanup *set_cleanups;
2643 bfd *obfd;
2644 int save_size = 0;
2645 asection *osec = NULL;
2646 int bfd_offset = 0;
2647
2648 /* Open the save file. */
2649 if (record_debug)
2650 fprintf_unfiltered (gdb_stdlog, "Saving execution log to core file '%s'\n",
2651 recfilename);
2652
2653 /* Open the output file. */
2654 obfd = create_gcore_bfd (recfilename);
2655 old_cleanups = make_cleanup (record_full_save_cleanups, obfd);
2656
2657 /* Save the current record entry to "cur_record_full_list". */
2658 cur_record_full_list = record_full_list;
2659
2660 /* Get the values of regcache and gdbarch. */
2661 regcache = get_current_regcache ();
2662 gdbarch = get_regcache_arch (regcache);
2663
2664 /* Disable the GDB operation record. */
2665 set_cleanups = record_full_gdb_operation_disable_set ();
2666
2667 /* Reverse execute to the begin of record list. */
2668 while (1)
2669 {
2670 /* Check for beginning and end of log. */
2671 if (record_full_list == &record_full_first)
2672 break;
2673
2674 record_full_exec_insn (regcache, gdbarch, record_full_list);
2675
2676 if (record_full_list->prev)
2677 record_full_list = record_full_list->prev;
2678 }
2679
2680 /* Compute the size needed for the extra bfd section. */
2681 save_size = 4; /* magic cookie */
2682 for (record_full_list = record_full_first.next; record_full_list;
2683 record_full_list = record_full_list->next)
2684 switch (record_full_list->type)
2685 {
2686 case record_full_end:
2687 save_size += 1 + 4 + 4;
2688 break;
2689 case record_full_reg:
2690 save_size += 1 + 4 + record_full_list->u.reg.len;
2691 break;
2692 case record_full_mem:
2693 save_size += 1 + 4 + 8 + record_full_list->u.mem.len;
2694 break;
2695 }
2696
2697 /* Make the new bfd section. */
2698 osec = bfd_make_section_anyway_with_flags (obfd, "precord",
2699 SEC_HAS_CONTENTS
2700 | SEC_READONLY);
2701 if (osec == NULL)
2702 error (_("Failed to create 'precord' section for corefile %s: %s"),
2703 recfilename,
2704 bfd_errmsg (bfd_get_error ()));
2705 bfd_set_section_size (obfd, osec, save_size);
2706 bfd_set_section_vma (obfd, osec, 0);
2707 bfd_set_section_alignment (obfd, osec, 0);
2708 bfd_section_lma (obfd, osec) = 0;
2709
2710 /* Save corefile state. */
2711 write_gcore_file (obfd);
2712
2713 /* Write out the record log. */
2714 /* Write the magic code. */
2715 magic = RECORD_FULL_FILE_MAGIC;
2716 if (record_debug)
2717 fprintf_unfiltered (gdb_stdlog,
2718 " Writing 4-byte magic cookie "
2719 "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2720 phex_nz (magic, 4));
2721 bfdcore_write (obfd, osec, &magic, sizeof (magic), &bfd_offset);
2722
2723 /* Save the entries to recfd and forward execute to the end of
2724 record list. */
2725 record_full_list = &record_full_first;
2726 while (1)
2727 {
2728 /* Save entry. */
2729 if (record_full_list != &record_full_first)
2730 {
2731 uint8_t type;
2732 uint32_t regnum, len, signal, count;
2733 uint64_t addr;
2734
2735 type = record_full_list->type;
2736 bfdcore_write (obfd, osec, &type, sizeof (type), &bfd_offset);
2737
2738 switch (record_full_list->type)
2739 {
2740 case record_full_reg: /* reg */
2741 if (record_debug)
2742 fprintf_unfiltered (gdb_stdlog,
2743 " Writing register %d (1 "
2744 "plus %lu plus %d bytes)\n",
2745 record_full_list->u.reg.num,
2746 (unsigned long) sizeof (regnum),
2747 record_full_list->u.reg.len);
2748
2749 /* Write regnum. */
2750 regnum = netorder32 (record_full_list->u.reg.num);
2751 bfdcore_write (obfd, osec, &regnum,
2752 sizeof (regnum), &bfd_offset);
2753
2754 /* Write regval. */
2755 bfdcore_write (obfd, osec,
2756 record_full_get_loc (record_full_list),
2757 record_full_list->u.reg.len, &bfd_offset);
2758 break;
2759
2760 case record_full_mem: /* mem */
2761 if (record_debug)
2762 fprintf_unfiltered (gdb_stdlog,
2763 " Writing memory %s (1 plus "
2764 "%lu plus %lu plus %d bytes)\n",
2765 paddress (gdbarch,
2766 record_full_list->u.mem.addr),
2767 (unsigned long) sizeof (addr),
2768 (unsigned long) sizeof (len),
2769 record_full_list->u.mem.len);
2770
2771 /* Write memlen. */
2772 len = netorder32 (record_full_list->u.mem.len);
2773 bfdcore_write (obfd, osec, &len, sizeof (len), &bfd_offset);
2774
2775 /* Write memaddr. */
2776 addr = netorder64 (record_full_list->u.mem.addr);
2777 bfdcore_write (obfd, osec, &addr,
2778 sizeof (addr), &bfd_offset);
2779
2780 /* Write memval. */
2781 bfdcore_write (obfd, osec,
2782 record_full_get_loc (record_full_list),
2783 record_full_list->u.mem.len, &bfd_offset);
2784 break;
2785
2786 case record_full_end:
2787 if (record_debug)
2788 fprintf_unfiltered (gdb_stdlog,
2789 " Writing record_full_end (1 + "
2790 "%lu + %lu bytes)\n",
2791 (unsigned long) sizeof (signal),
2792 (unsigned long) sizeof (count));
2793 /* Write signal value. */
2794 signal = netorder32 (record_full_list->u.end.sigval);
2795 bfdcore_write (obfd, osec, &signal,
2796 sizeof (signal), &bfd_offset);
2797
2798 /* Write insn count. */
2799 count = netorder32 (record_full_list->u.end.insn_num);
2800 bfdcore_write (obfd, osec, &count,
2801 sizeof (count), &bfd_offset);
2802 break;
2803 }
2804 }
2805
2806 /* Execute entry. */
2807 record_full_exec_insn (regcache, gdbarch, record_full_list);
2808
2809 if (record_full_list->next)
2810 record_full_list = record_full_list->next;
2811 else
2812 break;
2813 }
2814
2815 /* Reverse execute to cur_record_full_list. */
2816 while (1)
2817 {
2818 /* Check for beginning and end of log. */
2819 if (record_full_list == cur_record_full_list)
2820 break;
2821
2822 record_full_exec_insn (regcache, gdbarch, record_full_list);
2823
2824 if (record_full_list->prev)
2825 record_full_list = record_full_list->prev;
2826 }
2827
2828 do_cleanups (set_cleanups);
2829 gdb_bfd_unref (obfd);
2830 discard_cleanups (old_cleanups);
2831
2832 /* Succeeded. */
2833 printf_filtered (_("Saved core file %s with execution log.\n"),
2834 recfilename);
2835 }
2836
2837 /* record_full_goto_insn -- rewind the record log (forward or backward,
2838 depending on DIR) to the given entry, changing the program state
2839 correspondingly. */
2840
2841 static void
2842 record_full_goto_insn (struct record_full_entry *entry,
2843 enum exec_direction_kind dir)
2844 {
2845 struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
2846 struct regcache *regcache = get_current_regcache ();
2847 struct gdbarch *gdbarch = get_regcache_arch (regcache);
2848
2849 /* Assume everything is valid: we will hit the entry,
2850 and we will not hit the end of the recording. */
2851
2852 if (dir == EXEC_FORWARD)
2853 record_full_list = record_full_list->next;
2854
2855 do
2856 {
2857 record_full_exec_insn (regcache, gdbarch, record_full_list);
2858 if (dir == EXEC_REVERSE)
2859 record_full_list = record_full_list->prev;
2860 else
2861 record_full_list = record_full_list->next;
2862 } while (record_full_list != entry);
2863 do_cleanups (set_cleanups);
2864 }
2865
2866 /* Alias for "target record-full". */
2867
2868 static void
2869 cmd_record_full_start (char *args, int from_tty)
2870 {
2871 execute_command ("target record-full", from_tty);
2872 }
2873
2874 static void
2875 set_record_full_insn_max_num (char *args, int from_tty,
2876 struct cmd_list_element *c)
2877 {
2878 if (record_full_insn_num > record_full_insn_max_num)
2879 {
2880 /* Count down record_full_insn_num while releasing records from list. */
2881 while (record_full_insn_num > record_full_insn_max_num)
2882 {
2883 record_full_list_release_first ();
2884 record_full_insn_num--;
2885 }
2886 }
2887 }
2888
2889 /* The "set record full" command. */
2890
2891 static void
2892 set_record_full_command (char *args, int from_tty)
2893 {
2894 printf_unfiltered (_("\"set record full\" must be followed "
2895 "by an apporpriate subcommand.\n"));
2896 help_list (set_record_full_cmdlist, "set record full ", all_commands,
2897 gdb_stdout);
2898 }
2899
2900 /* The "show record full" command. */
2901
2902 static void
2903 show_record_full_command (char *args, int from_tty)
2904 {
2905 cmd_show_list (show_record_full_cmdlist, from_tty, "");
2906 }
2907
2908 /* Provide a prototype to silence -Wmissing-prototypes. */
2909 extern initialize_file_ftype _initialize_record_full;
2910
2911 void
2912 _initialize_record_full (void)
2913 {
2914 struct cmd_list_element *c;
2915
2916 /* Init record_full_first. */
2917 record_full_first.prev = NULL;
2918 record_full_first.next = NULL;
2919 record_full_first.type = record_full_end;
2920
2921 init_record_full_ops ();
2922 add_target (&record_full_ops);
2923 add_deprecated_target_alias (&record_full_ops, "record");
2924 init_record_full_core_ops ();
2925 add_target (&record_full_core_ops);
2926
2927 add_prefix_cmd ("full", class_obscure, cmd_record_full_start,
2928 _("Start full execution recording."), &record_full_cmdlist,
2929 "record full ", 0, &record_cmdlist);
2930
2931 c = add_cmd ("restore", class_obscure, cmd_record_full_restore,
2932 _("Restore the execution log from a file.\n\
2933 Argument is filename. File must be created with 'record save'."),
2934 &record_full_cmdlist);
2935 set_cmd_completer (c, filename_completer);
2936
2937 /* Deprecate the old version without "full" prefix. */
2938 c = add_alias_cmd ("restore", "full restore", class_obscure, 1,
2939 &record_cmdlist);
2940 set_cmd_completer (c, filename_completer);
2941 deprecate_cmd (c, "record full restore");
2942
2943 add_prefix_cmd ("full", class_support, set_record_full_command,
2944 _("Set record options"), &set_record_full_cmdlist,
2945 "set record full ", 0, &set_record_cmdlist);
2946
2947 add_prefix_cmd ("full", class_support, show_record_full_command,
2948 _("Show record options"), &show_record_full_cmdlist,
2949 "show record full ", 0, &show_record_cmdlist);
2950
2951 /* Record instructions number limit command. */
2952 add_setshow_boolean_cmd ("stop-at-limit", no_class,
2953 &record_full_stop_at_limit, _("\
2954 Set whether record/replay stops when record/replay buffer becomes full."), _("\
2955 Show whether record/replay stops when record/replay buffer becomes full."),
2956 _("Default is ON.\n\
2957 When ON, if the record/replay buffer becomes full, ask user what to do.\n\
2958 When OFF, if the record/replay buffer becomes full,\n\
2959 delete the oldest recorded instruction to make room for each new one."),
2960 NULL, NULL,
2961 &set_record_full_cmdlist, &show_record_full_cmdlist);
2962
2963 c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2964 &set_record_cmdlist);
2965 deprecate_cmd (c, "set record full stop-at-limit");
2966
2967 c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2968 &show_record_cmdlist);
2969 deprecate_cmd (c, "show record full stop-at-limit");
2970
2971 add_setshow_uinteger_cmd ("insn-number-max", no_class,
2972 &record_full_insn_max_num,
2973 _("Set record/replay buffer limit."),
2974 _("Show record/replay buffer limit."), _("\
2975 Set the maximum number of instructions to be stored in the\n\
2976 record/replay buffer. A value of either \"unlimited\" or zero means no\n\
2977 limit. Default is 200000."),
2978 set_record_full_insn_max_num,
2979 NULL, &set_record_full_cmdlist,
2980 &show_record_full_cmdlist);
2981
2982 c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2983 &set_record_cmdlist);
2984 deprecate_cmd (c, "set record full insn-number-max");
2985
2986 c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2987 &show_record_cmdlist);
2988 deprecate_cmd (c, "show record full insn-number-max");
2989
2990 add_setshow_boolean_cmd ("memory-query", no_class,
2991 &record_full_memory_query, _("\
2992 Set whether query if PREC cannot record memory change of next instruction."),
2993 _("\
2994 Show whether query if PREC cannot record memory change of next instruction."),
2995 _("\
2996 Default is OFF.\n\
2997 When ON, query if PREC cannot record memory change of next instruction."),
2998 NULL, NULL,
2999 &set_record_full_cmdlist,
3000 &show_record_full_cmdlist);
3001
3002 c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
3003 &set_record_cmdlist);
3004 deprecate_cmd (c, "set record full memory-query");
3005
3006 c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
3007 &show_record_cmdlist);
3008 deprecate_cmd (c, "show record full memory-query");
3009 }
This page took 0.09542 seconds and 4 git commands to generate.