Remove spurious exceptions.h inclusions
[deliverable/binutils-gdb.git] / gdb / record-full.c
1 /* Process record and replay target for GDB, the GNU debugger.
2
3 Copyright (C) 2013-2014 Free Software Foundation, Inc.
4
5 This file is part of GDB.
6
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
11
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
16
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
19
20 #include "defs.h"
21 #include "gdbcmd.h"
22 #include "regcache.h"
23 #include "gdbthread.h"
24 #include "event-top.h"
25 #include "completer.h"
26 #include "arch-utils.h"
27 #include "gdbcore.h"
28 #include "exec.h"
29 #include "record.h"
30 #include "record-full.h"
31 #include "elf-bfd.h"
32 #include "gcore.h"
33 #include "event-loop.h"
34 #include "inf-loop.h"
35 #include "gdb_bfd.h"
36 #include "observer.h"
37 #include "infrun.h"
38
39 #include <signal.h>
40
41 /* This module implements "target record-full", also known as "process
42 record and replay". This target sits on top of a "normal" target
43 (a target that "has execution"), and provides a record and replay
44 functionality, including reverse debugging.
45
46 Target record has two modes: recording, and replaying.
47
48 In record mode, we intercept the to_resume and to_wait methods.
49 Whenever gdb resumes the target, we run the target in single step
50 mode, and we build up an execution log in which, for each executed
51 instruction, we record all changes in memory and register state.
52 This is invisible to the user, to whom it just looks like an
53 ordinary debugging session (except for performance degredation).
54
55 In replay mode, instead of actually letting the inferior run as a
56 process, we simulate its execution by playing back the recorded
57 execution log. For each instruction in the log, we simulate the
58 instruction's side effects by duplicating the changes that it would
59 have made on memory and registers. */
60
61 #define DEFAULT_RECORD_FULL_INSN_MAX_NUM 200000
62
63 #define RECORD_FULL_IS_REPLAY \
64 (record_full_list->next || execution_direction == EXEC_REVERSE)
65
66 #define RECORD_FULL_FILE_MAGIC netorder32(0x20091016)
67
68 /* These are the core structs of the process record functionality.
69
70 A record_full_entry is a record of the value change of a register
71 ("record_full_reg") or a part of memory ("record_full_mem"). And each
72 instruction must have a struct record_full_entry ("record_full_end")
73 that indicates that this is the last struct record_full_entry of this
74 instruction.
75
76 Each struct record_full_entry is linked to "record_full_list" by "prev"
77 and "next" pointers. */
78
79 struct record_full_mem_entry
80 {
81 CORE_ADDR addr;
82 int len;
83 /* Set this flag if target memory for this entry
84 can no longer be accessed. */
85 int mem_entry_not_accessible;
86 union
87 {
88 gdb_byte *ptr;
89 gdb_byte buf[sizeof (gdb_byte *)];
90 } u;
91 };
92
93 struct record_full_reg_entry
94 {
95 unsigned short num;
96 unsigned short len;
97 union
98 {
99 gdb_byte *ptr;
100 gdb_byte buf[2 * sizeof (gdb_byte *)];
101 } u;
102 };
103
104 struct record_full_end_entry
105 {
106 enum gdb_signal sigval;
107 ULONGEST insn_num;
108 };
109
110 enum record_full_type
111 {
112 record_full_end = 0,
113 record_full_reg,
114 record_full_mem
115 };
116
117 /* This is the data structure that makes up the execution log.
118
119 The execution log consists of a single linked list of entries
120 of type "struct record_full_entry". It is doubly linked so that it
121 can be traversed in either direction.
122
123 The start of the list is anchored by a struct called
124 "record_full_first". The pointer "record_full_list" either points
125 to the last entry that was added to the list (in record mode), or to
126 the next entry in the list that will be executed (in replay mode).
127
128 Each list element (struct record_full_entry), in addition to next
129 and prev pointers, consists of a union of three entry types: mem,
130 reg, and end. A field called "type" determines which entry type is
131 represented by a given list element.
132
133 Each instruction that is added to the execution log is represented
134 by a variable number of list elements ('entries'). The instruction
135 will have one "reg" entry for each register that is changed by
136 executing the instruction (including the PC in every case). It
137 will also have one "mem" entry for each memory change. Finally,
138 each instruction will have an "end" entry that separates it from
139 the changes associated with the next instruction. */
140
141 struct record_full_entry
142 {
143 struct record_full_entry *prev;
144 struct record_full_entry *next;
145 enum record_full_type type;
146 union
147 {
148 /* reg */
149 struct record_full_reg_entry reg;
150 /* mem */
151 struct record_full_mem_entry mem;
152 /* end */
153 struct record_full_end_entry end;
154 } u;
155 };
156
157 /* If true, query if PREC cannot record memory
158 change of next instruction. */
159 int record_full_memory_query = 0;
160
161 struct record_full_core_buf_entry
162 {
163 struct record_full_core_buf_entry *prev;
164 struct target_section *p;
165 bfd_byte *buf;
166 };
167
168 /* Record buf with core target. */
169 static gdb_byte *record_full_core_regbuf = NULL;
170 static struct target_section *record_full_core_start;
171 static struct target_section *record_full_core_end;
172 static struct record_full_core_buf_entry *record_full_core_buf_list = NULL;
173
174 /* The following variables are used for managing the linked list that
175 represents the execution log.
176
177 record_full_first is the anchor that holds down the beginning of
178 the list.
179
180 record_full_list serves two functions:
181 1) In record mode, it anchors the end of the list.
182 2) In replay mode, it traverses the list and points to
183 the next instruction that must be emulated.
184
185 record_full_arch_list_head and record_full_arch_list_tail are used
186 to manage a separate list, which is used to build up the change
187 elements of the currently executing instruction during record mode.
188 When this instruction has been completely annotated in the "arch
189 list", it will be appended to the main execution log. */
190
191 static struct record_full_entry record_full_first;
192 static struct record_full_entry *record_full_list = &record_full_first;
193 static struct record_full_entry *record_full_arch_list_head = NULL;
194 static struct record_full_entry *record_full_arch_list_tail = NULL;
195
196 /* 1 ask user. 0 auto delete the last struct record_full_entry. */
197 static int record_full_stop_at_limit = 1;
198 /* Maximum allowed number of insns in execution log. */
199 static unsigned int record_full_insn_max_num
200 = DEFAULT_RECORD_FULL_INSN_MAX_NUM;
201 /* Actual count of insns presently in execution log. */
202 static unsigned int record_full_insn_num = 0;
203 /* Count of insns logged so far (may be larger
204 than count of insns presently in execution log). */
205 static ULONGEST record_full_insn_count;
206
207 /* The target_ops of process record. */
208 static struct target_ops record_full_ops;
209 static struct target_ops record_full_core_ops;
210
211 /* See record-full.h. */
212
213 int
214 record_full_is_used (void)
215 {
216 struct target_ops *t;
217
218 t = find_record_target ();
219 return (t == &record_full_ops
220 || t == &record_full_core_ops);
221 }
222
223
224 /* Command lists for "set/show record full". */
225 static struct cmd_list_element *set_record_full_cmdlist;
226 static struct cmd_list_element *show_record_full_cmdlist;
227
228 /* Command list for "record full". */
229 static struct cmd_list_element *record_full_cmdlist;
230
231 static void record_full_goto_insn (struct record_full_entry *entry,
232 enum exec_direction_kind dir);
233 static void record_full_save (struct target_ops *self,
234 const char *recfilename);
235
236 /* Alloc and free functions for record_full_reg, record_full_mem, and
237 record_full_end entries. */
238
239 /* Alloc a record_full_reg record entry. */
240
241 static inline struct record_full_entry *
242 record_full_reg_alloc (struct regcache *regcache, int regnum)
243 {
244 struct record_full_entry *rec;
245 struct gdbarch *gdbarch = get_regcache_arch (regcache);
246
247 rec = xcalloc (1, sizeof (struct record_full_entry));
248 rec->type = record_full_reg;
249 rec->u.reg.num = regnum;
250 rec->u.reg.len = register_size (gdbarch, regnum);
251 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
252 rec->u.reg.u.ptr = (gdb_byte *) xmalloc (rec->u.reg.len);
253
254 return rec;
255 }
256
257 /* Free a record_full_reg record entry. */
258
259 static inline void
260 record_full_reg_release (struct record_full_entry *rec)
261 {
262 gdb_assert (rec->type == record_full_reg);
263 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
264 xfree (rec->u.reg.u.ptr);
265 xfree (rec);
266 }
267
268 /* Alloc a record_full_mem record entry. */
269
270 static inline struct record_full_entry *
271 record_full_mem_alloc (CORE_ADDR addr, int len)
272 {
273 struct record_full_entry *rec;
274
275 rec = xcalloc (1, sizeof (struct record_full_entry));
276 rec->type = record_full_mem;
277 rec->u.mem.addr = addr;
278 rec->u.mem.len = len;
279 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
280 rec->u.mem.u.ptr = (gdb_byte *) xmalloc (len);
281
282 return rec;
283 }
284
285 /* Free a record_full_mem record entry. */
286
287 static inline void
288 record_full_mem_release (struct record_full_entry *rec)
289 {
290 gdb_assert (rec->type == record_full_mem);
291 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
292 xfree (rec->u.mem.u.ptr);
293 xfree (rec);
294 }
295
296 /* Alloc a record_full_end record entry. */
297
298 static inline struct record_full_entry *
299 record_full_end_alloc (void)
300 {
301 struct record_full_entry *rec;
302
303 rec = xcalloc (1, sizeof (struct record_full_entry));
304 rec->type = record_full_end;
305
306 return rec;
307 }
308
309 /* Free a record_full_end record entry. */
310
311 static inline void
312 record_full_end_release (struct record_full_entry *rec)
313 {
314 xfree (rec);
315 }
316
317 /* Free one record entry, any type.
318 Return entry->type, in case caller wants to know. */
319
320 static inline enum record_full_type
321 record_full_entry_release (struct record_full_entry *rec)
322 {
323 enum record_full_type type = rec->type;
324
325 switch (type) {
326 case record_full_reg:
327 record_full_reg_release (rec);
328 break;
329 case record_full_mem:
330 record_full_mem_release (rec);
331 break;
332 case record_full_end:
333 record_full_end_release (rec);
334 break;
335 }
336 return type;
337 }
338
339 /* Free all record entries in list pointed to by REC. */
340
341 static void
342 record_full_list_release (struct record_full_entry *rec)
343 {
344 if (!rec)
345 return;
346
347 while (rec->next)
348 rec = rec->next;
349
350 while (rec->prev)
351 {
352 rec = rec->prev;
353 record_full_entry_release (rec->next);
354 }
355
356 if (rec == &record_full_first)
357 {
358 record_full_insn_num = 0;
359 record_full_first.next = NULL;
360 }
361 else
362 record_full_entry_release (rec);
363 }
364
365 /* Free all record entries forward of the given list position. */
366
367 static void
368 record_full_list_release_following (struct record_full_entry *rec)
369 {
370 struct record_full_entry *tmp = rec->next;
371
372 rec->next = NULL;
373 while (tmp)
374 {
375 rec = tmp->next;
376 if (record_full_entry_release (tmp) == record_full_end)
377 {
378 record_full_insn_num--;
379 record_full_insn_count--;
380 }
381 tmp = rec;
382 }
383 }
384
385 /* Delete the first instruction from the beginning of the log, to make
386 room for adding a new instruction at the end of the log.
387
388 Note -- this function does not modify record_full_insn_num. */
389
390 static void
391 record_full_list_release_first (void)
392 {
393 struct record_full_entry *tmp;
394
395 if (!record_full_first.next)
396 return;
397
398 /* Loop until a record_full_end. */
399 while (1)
400 {
401 /* Cut record_full_first.next out of the linked list. */
402 tmp = record_full_first.next;
403 record_full_first.next = tmp->next;
404 tmp->next->prev = &record_full_first;
405
406 /* tmp is now isolated, and can be deleted. */
407 if (record_full_entry_release (tmp) == record_full_end)
408 break; /* End loop at first record_full_end. */
409
410 if (!record_full_first.next)
411 {
412 gdb_assert (record_full_insn_num == 1);
413 break; /* End loop when list is empty. */
414 }
415 }
416 }
417
418 /* Add a struct record_full_entry to record_full_arch_list. */
419
420 static void
421 record_full_arch_list_add (struct record_full_entry *rec)
422 {
423 if (record_debug > 1)
424 fprintf_unfiltered (gdb_stdlog,
425 "Process record: record_full_arch_list_add %s.\n",
426 host_address_to_string (rec));
427
428 if (record_full_arch_list_tail)
429 {
430 record_full_arch_list_tail->next = rec;
431 rec->prev = record_full_arch_list_tail;
432 record_full_arch_list_tail = rec;
433 }
434 else
435 {
436 record_full_arch_list_head = rec;
437 record_full_arch_list_tail = rec;
438 }
439 }
440
441 /* Return the value storage location of a record entry. */
442 static inline gdb_byte *
443 record_full_get_loc (struct record_full_entry *rec)
444 {
445 switch (rec->type) {
446 case record_full_mem:
447 if (rec->u.mem.len > sizeof (rec->u.mem.u.buf))
448 return rec->u.mem.u.ptr;
449 else
450 return rec->u.mem.u.buf;
451 case record_full_reg:
452 if (rec->u.reg.len > sizeof (rec->u.reg.u.buf))
453 return rec->u.reg.u.ptr;
454 else
455 return rec->u.reg.u.buf;
456 case record_full_end:
457 default:
458 gdb_assert_not_reached ("unexpected record_full_entry type");
459 return NULL;
460 }
461 }
462
463 /* Record the value of a register NUM to record_full_arch_list. */
464
465 int
466 record_full_arch_list_add_reg (struct regcache *regcache, int regnum)
467 {
468 struct record_full_entry *rec;
469
470 if (record_debug > 1)
471 fprintf_unfiltered (gdb_stdlog,
472 "Process record: add register num = %d to "
473 "record list.\n",
474 regnum);
475
476 rec = record_full_reg_alloc (regcache, regnum);
477
478 regcache_raw_read (regcache, regnum, record_full_get_loc (rec));
479
480 record_full_arch_list_add (rec);
481
482 return 0;
483 }
484
485 /* Record the value of a region of memory whose address is ADDR and
486 length is LEN to record_full_arch_list. */
487
488 int
489 record_full_arch_list_add_mem (CORE_ADDR addr, int len)
490 {
491 struct record_full_entry *rec;
492
493 if (record_debug > 1)
494 fprintf_unfiltered (gdb_stdlog,
495 "Process record: add mem addr = %s len = %d to "
496 "record list.\n",
497 paddress (target_gdbarch (), addr), len);
498
499 if (!addr) /* FIXME: Why? Some arch must permit it... */
500 return 0;
501
502 rec = record_full_mem_alloc (addr, len);
503
504 if (record_read_memory (target_gdbarch (), addr,
505 record_full_get_loc (rec), len))
506 {
507 record_full_mem_release (rec);
508 return -1;
509 }
510
511 record_full_arch_list_add (rec);
512
513 return 0;
514 }
515
516 /* Add a record_full_end type struct record_full_entry to
517 record_full_arch_list. */
518
519 int
520 record_full_arch_list_add_end (void)
521 {
522 struct record_full_entry *rec;
523
524 if (record_debug > 1)
525 fprintf_unfiltered (gdb_stdlog,
526 "Process record: add end to arch list.\n");
527
528 rec = record_full_end_alloc ();
529 rec->u.end.sigval = GDB_SIGNAL_0;
530 rec->u.end.insn_num = ++record_full_insn_count;
531
532 record_full_arch_list_add (rec);
533
534 return 0;
535 }
536
537 static void
538 record_full_check_insn_num (int set_terminal)
539 {
540 if (record_full_insn_num == record_full_insn_max_num)
541 {
542 /* Ask user what to do. */
543 if (record_full_stop_at_limit)
544 {
545 int q;
546
547 if (set_terminal)
548 target_terminal_ours ();
549 q = yquery (_("Do you want to auto delete previous execution "
550 "log entries when record/replay buffer becomes "
551 "full (record full stop-at-limit)?"));
552 if (set_terminal)
553 target_terminal_inferior ();
554 if (q)
555 record_full_stop_at_limit = 0;
556 else
557 error (_("Process record: stopped by user."));
558 }
559 }
560 }
561
562 static void
563 record_full_arch_list_cleanups (void *ignore)
564 {
565 record_full_list_release (record_full_arch_list_tail);
566 }
567
568 /* Before inferior step (when GDB record the running message, inferior
569 only can step), GDB will call this function to record the values to
570 record_full_list. This function will call gdbarch_process_record to
571 record the running message of inferior and set them to
572 record_full_arch_list, and add it to record_full_list. */
573
574 static int
575 record_full_message (struct regcache *regcache, enum gdb_signal signal)
576 {
577 int ret;
578 struct gdbarch *gdbarch = get_regcache_arch (regcache);
579 struct cleanup *old_cleanups
580 = make_cleanup (record_full_arch_list_cleanups, 0);
581
582 record_full_arch_list_head = NULL;
583 record_full_arch_list_tail = NULL;
584
585 /* Check record_full_insn_num. */
586 record_full_check_insn_num (1);
587
588 /* If gdb sends a signal value to target_resume,
589 save it in the 'end' field of the previous instruction.
590
591 Maybe process record should record what really happened,
592 rather than what gdb pretends has happened.
593
594 So if Linux delivered the signal to the child process during
595 the record mode, we will record it and deliver it again in
596 the replay mode.
597
598 If user says "ignore this signal" during the record mode, then
599 it will be ignored again during the replay mode (no matter if
600 the user says something different, like "deliver this signal"
601 during the replay mode).
602
603 User should understand that nothing he does during the replay
604 mode will change the behavior of the child. If he tries,
605 then that is a user error.
606
607 But we should still deliver the signal to gdb during the replay,
608 if we delivered it during the recording. Therefore we should
609 record the signal during record_full_wait, not
610 record_full_resume. */
611 if (record_full_list != &record_full_first) /* FIXME better way to check */
612 {
613 gdb_assert (record_full_list->type == record_full_end);
614 record_full_list->u.end.sigval = signal;
615 }
616
617 if (signal == GDB_SIGNAL_0
618 || !gdbarch_process_record_signal_p (gdbarch))
619 ret = gdbarch_process_record (gdbarch,
620 regcache,
621 regcache_read_pc (regcache));
622 else
623 ret = gdbarch_process_record_signal (gdbarch,
624 regcache,
625 signal);
626
627 if (ret > 0)
628 error (_("Process record: inferior program stopped."));
629 if (ret < 0)
630 error (_("Process record: failed to record execution log."));
631
632 discard_cleanups (old_cleanups);
633
634 record_full_list->next = record_full_arch_list_head;
635 record_full_arch_list_head->prev = record_full_list;
636 record_full_list = record_full_arch_list_tail;
637
638 if (record_full_insn_num == record_full_insn_max_num)
639 record_full_list_release_first ();
640 else
641 record_full_insn_num++;
642
643 return 1;
644 }
645
646 struct record_full_message_args {
647 struct regcache *regcache;
648 enum gdb_signal signal;
649 };
650
651 static int
652 record_full_message_wrapper (void *args)
653 {
654 struct record_full_message_args *record_full_args = args;
655
656 return record_full_message (record_full_args->regcache,
657 record_full_args->signal);
658 }
659
660 static int
661 record_full_message_wrapper_safe (struct regcache *regcache,
662 enum gdb_signal signal)
663 {
664 struct record_full_message_args args;
665
666 args.regcache = regcache;
667 args.signal = signal;
668
669 return catch_errors (record_full_message_wrapper, &args, NULL,
670 RETURN_MASK_ALL);
671 }
672
673 /* Set to 1 if record_full_store_registers and record_full_xfer_partial
674 doesn't need record. */
675
676 static int record_full_gdb_operation_disable = 0;
677
678 struct cleanup *
679 record_full_gdb_operation_disable_set (void)
680 {
681 struct cleanup *old_cleanups = NULL;
682
683 old_cleanups =
684 make_cleanup_restore_integer (&record_full_gdb_operation_disable);
685 record_full_gdb_operation_disable = 1;
686
687 return old_cleanups;
688 }
689
690 /* Flag set to TRUE for target_stopped_by_watchpoint. */
691 static int record_full_hw_watchpoint = 0;
692
693 /* Execute one instruction from the record log. Each instruction in
694 the log will be represented by an arbitrary sequence of register
695 entries and memory entries, followed by an 'end' entry. */
696
697 static inline void
698 record_full_exec_insn (struct regcache *regcache,
699 struct gdbarch *gdbarch,
700 struct record_full_entry *entry)
701 {
702 switch (entry->type)
703 {
704 case record_full_reg: /* reg */
705 {
706 gdb_byte reg[MAX_REGISTER_SIZE];
707
708 if (record_debug > 1)
709 fprintf_unfiltered (gdb_stdlog,
710 "Process record: record_full_reg %s to "
711 "inferior num = %d.\n",
712 host_address_to_string (entry),
713 entry->u.reg.num);
714
715 regcache_cooked_read (regcache, entry->u.reg.num, reg);
716 regcache_cooked_write (regcache, entry->u.reg.num,
717 record_full_get_loc (entry));
718 memcpy (record_full_get_loc (entry), reg, entry->u.reg.len);
719 }
720 break;
721
722 case record_full_mem: /* mem */
723 {
724 /* Nothing to do if the entry is flagged not_accessible. */
725 if (!entry->u.mem.mem_entry_not_accessible)
726 {
727 gdb_byte *mem = alloca (entry->u.mem.len);
728
729 if (record_debug > 1)
730 fprintf_unfiltered (gdb_stdlog,
731 "Process record: record_full_mem %s to "
732 "inferior addr = %s len = %d.\n",
733 host_address_to_string (entry),
734 paddress (gdbarch, entry->u.mem.addr),
735 entry->u.mem.len);
736
737 if (record_read_memory (gdbarch,
738 entry->u.mem.addr, mem, entry->u.mem.len))
739 entry->u.mem.mem_entry_not_accessible = 1;
740 else
741 {
742 if (target_write_memory (entry->u.mem.addr,
743 record_full_get_loc (entry),
744 entry->u.mem.len))
745 {
746 entry->u.mem.mem_entry_not_accessible = 1;
747 if (record_debug)
748 warning (_("Process record: error writing memory at "
749 "addr = %s len = %d."),
750 paddress (gdbarch, entry->u.mem.addr),
751 entry->u.mem.len);
752 }
753 else
754 {
755 memcpy (record_full_get_loc (entry), mem,
756 entry->u.mem.len);
757
758 /* We've changed memory --- check if a hardware
759 watchpoint should trap. Note that this
760 presently assumes the target beneath supports
761 continuable watchpoints. On non-continuable
762 watchpoints target, we'll want to check this
763 _before_ actually doing the memory change, and
764 not doing the change at all if the watchpoint
765 traps. */
766 if (hardware_watchpoint_inserted_in_range
767 (get_regcache_aspace (regcache),
768 entry->u.mem.addr, entry->u.mem.len))
769 record_full_hw_watchpoint = 1;
770 }
771 }
772 }
773 }
774 break;
775 }
776 }
777
778 static void record_full_restore (void);
779
780 /* Asynchronous signal handle registered as event loop source for when
781 we have pending events ready to be passed to the core. */
782
783 static struct async_event_handler *record_full_async_inferior_event_token;
784
785 static void
786 record_full_async_inferior_event_handler (gdb_client_data data)
787 {
788 inferior_event_handler (INF_REG_EVENT, NULL);
789 }
790
791 /* Open the process record target. */
792
793 static void
794 record_full_core_open_1 (const char *name, int from_tty)
795 {
796 struct regcache *regcache = get_current_regcache ();
797 int regnum = gdbarch_num_regs (get_regcache_arch (regcache));
798 int i;
799
800 /* Get record_full_core_regbuf. */
801 target_fetch_registers (regcache, -1);
802 record_full_core_regbuf = xmalloc (MAX_REGISTER_SIZE * regnum);
803 for (i = 0; i < regnum; i ++)
804 regcache_raw_collect (regcache, i,
805 record_full_core_regbuf + MAX_REGISTER_SIZE * i);
806
807 /* Get record_full_core_start and record_full_core_end. */
808 if (build_section_table (core_bfd, &record_full_core_start,
809 &record_full_core_end))
810 {
811 xfree (record_full_core_regbuf);
812 record_full_core_regbuf = NULL;
813 error (_("\"%s\": Can't find sections: %s"),
814 bfd_get_filename (core_bfd), bfd_errmsg (bfd_get_error ()));
815 }
816
817 push_target (&record_full_core_ops);
818 record_full_restore ();
819 }
820
821 /* "to_open" target method for 'live' processes. */
822
823 static void
824 record_full_open_1 (const char *name, int from_tty)
825 {
826 if (record_debug)
827 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
828
829 /* check exec */
830 if (!target_has_execution)
831 error (_("Process record: the program is not being run."));
832 if (non_stop)
833 error (_("Process record target can't debug inferior in non-stop mode "
834 "(non-stop)."));
835
836 if (!gdbarch_process_record_p (target_gdbarch ()))
837 error (_("Process record: the current architecture doesn't support "
838 "record function."));
839
840 push_target (&record_full_ops);
841 }
842
843 static void record_full_init_record_breakpoints (void);
844
845 /* "to_open" target method. Open the process record target. */
846
847 static void
848 record_full_open (const char *name, int from_tty)
849 {
850 struct target_ops *t;
851
852 if (record_debug)
853 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_open\n");
854
855 record_preopen ();
856
857 /* Reset */
858 record_full_insn_num = 0;
859 record_full_insn_count = 0;
860 record_full_list = &record_full_first;
861 record_full_list->next = NULL;
862
863 if (core_bfd)
864 record_full_core_open_1 (name, from_tty);
865 else
866 record_full_open_1 (name, from_tty);
867
868 /* Register extra event sources in the event loop. */
869 record_full_async_inferior_event_token
870 = create_async_event_handler (record_full_async_inferior_event_handler,
871 NULL);
872
873 record_full_init_record_breakpoints ();
874
875 observer_notify_record_changed (current_inferior (), 1);
876 }
877
878 /* "to_close" target method. Close the process record target. */
879
880 static void
881 record_full_close (struct target_ops *self)
882 {
883 struct record_full_core_buf_entry *entry;
884
885 if (record_debug)
886 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_close\n");
887
888 record_full_list_release (record_full_list);
889
890 /* Release record_full_core_regbuf. */
891 if (record_full_core_regbuf)
892 {
893 xfree (record_full_core_regbuf);
894 record_full_core_regbuf = NULL;
895 }
896
897 /* Release record_full_core_buf_list. */
898 if (record_full_core_buf_list)
899 {
900 for (entry = record_full_core_buf_list->prev; entry;
901 entry = entry->prev)
902 {
903 xfree (record_full_core_buf_list);
904 record_full_core_buf_list = entry;
905 }
906 record_full_core_buf_list = NULL;
907 }
908
909 if (record_full_async_inferior_event_token)
910 delete_async_event_handler (&record_full_async_inferior_event_token);
911 }
912
913 static int record_full_resume_step = 0;
914
915 /* True if we've been resumed, and so each record_full_wait call should
916 advance execution. If this is false, record_full_wait will return a
917 TARGET_WAITKIND_IGNORE. */
918 static int record_full_resumed = 0;
919
920 /* The execution direction of the last resume we got. This is
921 necessary for async mode. Vis (order is not strictly accurate):
922
923 1. user has the global execution direction set to forward
924 2. user does a reverse-step command
925 3. record_full_resume is called with global execution direction
926 temporarily switched to reverse
927 4. GDB's execution direction is reverted back to forward
928 5. target record notifies event loop there's an event to handle
929 6. infrun asks the target which direction was it going, and switches
930 the global execution direction accordingly (to reverse)
931 7. infrun polls an event out of the record target, and handles it
932 8. GDB goes back to the event loop, and goto #4.
933 */
934 static enum exec_direction_kind record_full_execution_dir = EXEC_FORWARD;
935
936 /* "to_resume" target method. Resume the process record target. */
937
938 static void
939 record_full_resume (struct target_ops *ops, ptid_t ptid, int step,
940 enum gdb_signal signal)
941 {
942 record_full_resume_step = step;
943 record_full_resumed = 1;
944 record_full_execution_dir = execution_direction;
945
946 if (!RECORD_FULL_IS_REPLAY)
947 {
948 struct gdbarch *gdbarch = target_thread_architecture (ptid);
949
950 record_full_message (get_current_regcache (), signal);
951
952 if (!step)
953 {
954 /* This is not hard single step. */
955 if (!gdbarch_software_single_step_p (gdbarch))
956 {
957 /* This is a normal continue. */
958 step = 1;
959 }
960 else
961 {
962 /* This arch support soft sigle step. */
963 if (single_step_breakpoints_inserted ())
964 {
965 /* This is a soft single step. */
966 record_full_resume_step = 1;
967 }
968 else
969 {
970 /* This is a continue.
971 Try to insert a soft single step breakpoint. */
972 if (!gdbarch_software_single_step (gdbarch,
973 get_current_frame ()))
974 {
975 /* This system don't want use soft single step.
976 Use hard sigle step. */
977 step = 1;
978 }
979 }
980 }
981 }
982
983 /* Make sure the target beneath reports all signals. */
984 target_pass_signals (0, NULL);
985
986 ops->beneath->to_resume (ops->beneath, ptid, step, signal);
987 }
988
989 /* We are about to start executing the inferior (or simulate it),
990 let's register it with the event loop. */
991 if (target_can_async_p ())
992 {
993 target_async (inferior_event_handler, 0);
994 /* Notify the event loop there's an event to wait for. We do
995 most of the work in record_full_wait. */
996 mark_async_event_handler (record_full_async_inferior_event_token);
997 }
998 }
999
1000 static int record_full_get_sig = 0;
1001
1002 /* SIGINT signal handler, registered by "to_wait" method. */
1003
1004 static void
1005 record_full_sig_handler (int signo)
1006 {
1007 if (record_debug)
1008 fprintf_unfiltered (gdb_stdlog, "Process record: get a signal\n");
1009
1010 /* It will break the running inferior in replay mode. */
1011 record_full_resume_step = 1;
1012
1013 /* It will let record_full_wait set inferior status to get the signal
1014 SIGINT. */
1015 record_full_get_sig = 1;
1016 }
1017
1018 static void
1019 record_full_wait_cleanups (void *ignore)
1020 {
1021 if (execution_direction == EXEC_REVERSE)
1022 {
1023 if (record_full_list->next)
1024 record_full_list = record_full_list->next;
1025 }
1026 else
1027 record_full_list = record_full_list->prev;
1028 }
1029
1030 /* "to_wait" target method for process record target.
1031
1032 In record mode, the target is always run in singlestep mode
1033 (even when gdb says to continue). The to_wait method intercepts
1034 the stop events and determines which ones are to be passed on to
1035 gdb. Most stop events are just singlestep events that gdb is not
1036 to know about, so the to_wait method just records them and keeps
1037 singlestepping.
1038
1039 In replay mode, this function emulates the recorded execution log,
1040 one instruction at a time (forward or backward), and determines
1041 where to stop. */
1042
1043 static ptid_t
1044 record_full_wait_1 (struct target_ops *ops,
1045 ptid_t ptid, struct target_waitstatus *status,
1046 int options)
1047 {
1048 struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
1049
1050 if (record_debug)
1051 fprintf_unfiltered (gdb_stdlog,
1052 "Process record: record_full_wait "
1053 "record_full_resume_step = %d, "
1054 "record_full_resumed = %d, direction=%s\n",
1055 record_full_resume_step, record_full_resumed,
1056 record_full_execution_dir == EXEC_FORWARD
1057 ? "forward" : "reverse");
1058
1059 if (!record_full_resumed)
1060 {
1061 gdb_assert ((options & TARGET_WNOHANG) != 0);
1062
1063 /* No interesting event. */
1064 status->kind = TARGET_WAITKIND_IGNORE;
1065 return minus_one_ptid;
1066 }
1067
1068 record_full_get_sig = 0;
1069 signal (SIGINT, record_full_sig_handler);
1070
1071 if (!RECORD_FULL_IS_REPLAY && ops != &record_full_core_ops)
1072 {
1073 if (record_full_resume_step)
1074 {
1075 /* This is a single step. */
1076 return ops->beneath->to_wait (ops->beneath, ptid, status, options);
1077 }
1078 else
1079 {
1080 /* This is not a single step. */
1081 ptid_t ret;
1082 CORE_ADDR tmp_pc;
1083 struct gdbarch *gdbarch = target_thread_architecture (inferior_ptid);
1084
1085 while (1)
1086 {
1087 ret = ops->beneath->to_wait (ops->beneath, ptid, status, options);
1088 if (status->kind == TARGET_WAITKIND_IGNORE)
1089 {
1090 if (record_debug)
1091 fprintf_unfiltered (gdb_stdlog,
1092 "Process record: record_full_wait "
1093 "target beneath not done yet\n");
1094 return ret;
1095 }
1096
1097 if (single_step_breakpoints_inserted ())
1098 remove_single_step_breakpoints ();
1099
1100 if (record_full_resume_step)
1101 return ret;
1102
1103 /* Is this a SIGTRAP? */
1104 if (status->kind == TARGET_WAITKIND_STOPPED
1105 && status->value.sig == GDB_SIGNAL_TRAP)
1106 {
1107 struct regcache *regcache;
1108 struct address_space *aspace;
1109
1110 /* Yes -- this is likely our single-step finishing,
1111 but check if there's any reason the core would be
1112 interested in the event. */
1113
1114 registers_changed ();
1115 regcache = get_current_regcache ();
1116 tmp_pc = regcache_read_pc (regcache);
1117 aspace = get_regcache_aspace (regcache);
1118
1119 if (target_stopped_by_watchpoint ())
1120 {
1121 /* Always interested in watchpoints. */
1122 }
1123 else if (breakpoint_inserted_here_p (aspace, tmp_pc))
1124 {
1125 /* There is a breakpoint here. Let the core
1126 handle it. */
1127 if (software_breakpoint_inserted_here_p (aspace, tmp_pc))
1128 {
1129 struct gdbarch *gdbarch
1130 = get_regcache_arch (regcache);
1131 CORE_ADDR decr_pc_after_break
1132 = target_decr_pc_after_break (gdbarch);
1133 if (decr_pc_after_break)
1134 regcache_write_pc (regcache,
1135 tmp_pc + decr_pc_after_break);
1136 }
1137 }
1138 else
1139 {
1140 /* This is a single-step trap. Record the
1141 insn and issue another step.
1142 FIXME: this part can be a random SIGTRAP too.
1143 But GDB cannot handle it. */
1144 int step = 1;
1145
1146 if (!record_full_message_wrapper_safe (regcache,
1147 GDB_SIGNAL_0))
1148 {
1149 status->kind = TARGET_WAITKIND_STOPPED;
1150 status->value.sig = GDB_SIGNAL_0;
1151 break;
1152 }
1153
1154 if (gdbarch_software_single_step_p (gdbarch))
1155 {
1156 /* Try to insert the software single step breakpoint.
1157 If insert success, set step to 0. */
1158 set_executing (inferior_ptid, 0);
1159 reinit_frame_cache ();
1160 if (gdbarch_software_single_step (gdbarch,
1161 get_current_frame ()))
1162 step = 0;
1163 set_executing (inferior_ptid, 1);
1164 }
1165
1166 if (record_debug)
1167 fprintf_unfiltered (gdb_stdlog,
1168 "Process record: record_full_wait "
1169 "issuing one more step in the "
1170 "target beneath\n");
1171 ops->beneath->to_resume (ops->beneath, ptid, step,
1172 GDB_SIGNAL_0);
1173 continue;
1174 }
1175 }
1176
1177 /* The inferior is broken by a breakpoint or a signal. */
1178 break;
1179 }
1180
1181 return ret;
1182 }
1183 }
1184 else
1185 {
1186 struct regcache *regcache = get_current_regcache ();
1187 struct gdbarch *gdbarch = get_regcache_arch (regcache);
1188 struct address_space *aspace = get_regcache_aspace (regcache);
1189 int continue_flag = 1;
1190 int first_record_full_end = 1;
1191 struct cleanup *old_cleanups
1192 = make_cleanup (record_full_wait_cleanups, 0);
1193 CORE_ADDR tmp_pc;
1194
1195 record_full_hw_watchpoint = 0;
1196 status->kind = TARGET_WAITKIND_STOPPED;
1197
1198 /* Check breakpoint when forward execute. */
1199 if (execution_direction == EXEC_FORWARD)
1200 {
1201 tmp_pc = regcache_read_pc (regcache);
1202 if (breakpoint_inserted_here_p (aspace, tmp_pc))
1203 {
1204 int decr_pc_after_break = target_decr_pc_after_break (gdbarch);
1205
1206 if (record_debug)
1207 fprintf_unfiltered (gdb_stdlog,
1208 "Process record: break at %s.\n",
1209 paddress (gdbarch, tmp_pc));
1210
1211 if (decr_pc_after_break
1212 && !record_full_resume_step
1213 && software_breakpoint_inserted_here_p (aspace, tmp_pc))
1214 regcache_write_pc (regcache,
1215 tmp_pc + decr_pc_after_break);
1216 goto replay_out;
1217 }
1218 }
1219
1220 /* If GDB is in terminal_inferior mode, it will not get the signal.
1221 And in GDB replay mode, GDB doesn't need to be in terminal_inferior
1222 mode, because inferior will not executed.
1223 Then set it to terminal_ours to make GDB get the signal. */
1224 target_terminal_ours ();
1225
1226 /* In EXEC_FORWARD mode, record_full_list points to the tail of prev
1227 instruction. */
1228 if (execution_direction == EXEC_FORWARD && record_full_list->next)
1229 record_full_list = record_full_list->next;
1230
1231 /* Loop over the record_full_list, looking for the next place to
1232 stop. */
1233 do
1234 {
1235 /* Check for beginning and end of log. */
1236 if (execution_direction == EXEC_REVERSE
1237 && record_full_list == &record_full_first)
1238 {
1239 /* Hit beginning of record log in reverse. */
1240 status->kind = TARGET_WAITKIND_NO_HISTORY;
1241 break;
1242 }
1243 if (execution_direction != EXEC_REVERSE && !record_full_list->next)
1244 {
1245 /* Hit end of record log going forward. */
1246 status->kind = TARGET_WAITKIND_NO_HISTORY;
1247 break;
1248 }
1249
1250 record_full_exec_insn (regcache, gdbarch, record_full_list);
1251
1252 if (record_full_list->type == record_full_end)
1253 {
1254 if (record_debug > 1)
1255 fprintf_unfiltered (gdb_stdlog,
1256 "Process record: record_full_end %s to "
1257 "inferior.\n",
1258 host_address_to_string (record_full_list));
1259
1260 if (first_record_full_end && execution_direction == EXEC_REVERSE)
1261 {
1262 /* When reverse excute, the first record_full_end is the
1263 part of current instruction. */
1264 first_record_full_end = 0;
1265 }
1266 else
1267 {
1268 /* In EXEC_REVERSE mode, this is the record_full_end of prev
1269 instruction.
1270 In EXEC_FORWARD mode, this is the record_full_end of
1271 current instruction. */
1272 /* step */
1273 if (record_full_resume_step)
1274 {
1275 if (record_debug > 1)
1276 fprintf_unfiltered (gdb_stdlog,
1277 "Process record: step.\n");
1278 continue_flag = 0;
1279 }
1280
1281 /* check breakpoint */
1282 tmp_pc = regcache_read_pc (regcache);
1283 if (breakpoint_inserted_here_p (aspace, tmp_pc))
1284 {
1285 int decr_pc_after_break
1286 = target_decr_pc_after_break (gdbarch);
1287
1288 if (record_debug)
1289 fprintf_unfiltered (gdb_stdlog,
1290 "Process record: break "
1291 "at %s.\n",
1292 paddress (gdbarch, tmp_pc));
1293 if (decr_pc_after_break
1294 && execution_direction == EXEC_FORWARD
1295 && !record_full_resume_step
1296 && software_breakpoint_inserted_here_p (aspace,
1297 tmp_pc))
1298 regcache_write_pc (regcache,
1299 tmp_pc + decr_pc_after_break);
1300 continue_flag = 0;
1301 }
1302
1303 if (record_full_hw_watchpoint)
1304 {
1305 if (record_debug)
1306 fprintf_unfiltered (gdb_stdlog,
1307 "Process record: hit hw "
1308 "watchpoint.\n");
1309 continue_flag = 0;
1310 }
1311 /* Check target signal */
1312 if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1313 /* FIXME: better way to check */
1314 continue_flag = 0;
1315 }
1316 }
1317
1318 if (continue_flag)
1319 {
1320 if (execution_direction == EXEC_REVERSE)
1321 {
1322 if (record_full_list->prev)
1323 record_full_list = record_full_list->prev;
1324 }
1325 else
1326 {
1327 if (record_full_list->next)
1328 record_full_list = record_full_list->next;
1329 }
1330 }
1331 }
1332 while (continue_flag);
1333
1334 replay_out:
1335 if (record_full_get_sig)
1336 status->value.sig = GDB_SIGNAL_INT;
1337 else if (record_full_list->u.end.sigval != GDB_SIGNAL_0)
1338 /* FIXME: better way to check */
1339 status->value.sig = record_full_list->u.end.sigval;
1340 else
1341 status->value.sig = GDB_SIGNAL_TRAP;
1342
1343 discard_cleanups (old_cleanups);
1344 }
1345
1346 signal (SIGINT, handle_sigint);
1347
1348 do_cleanups (set_cleanups);
1349 return inferior_ptid;
1350 }
1351
1352 static ptid_t
1353 record_full_wait (struct target_ops *ops,
1354 ptid_t ptid, struct target_waitstatus *status,
1355 int options)
1356 {
1357 ptid_t return_ptid;
1358
1359 return_ptid = record_full_wait_1 (ops, ptid, status, options);
1360 if (status->kind != TARGET_WAITKIND_IGNORE)
1361 {
1362 /* We're reporting a stop. Make sure any spurious
1363 target_wait(WNOHANG) doesn't advance the target until the
1364 core wants us resumed again. */
1365 record_full_resumed = 0;
1366 }
1367 return return_ptid;
1368 }
1369
1370 static int
1371 record_full_stopped_by_watchpoint (struct target_ops *ops)
1372 {
1373 if (RECORD_FULL_IS_REPLAY)
1374 return record_full_hw_watchpoint;
1375 else
1376 return ops->beneath->to_stopped_by_watchpoint (ops->beneath);
1377 }
1378
1379 static int
1380 record_full_stopped_data_address (struct target_ops *ops, CORE_ADDR *addr_p)
1381 {
1382 if (RECORD_FULL_IS_REPLAY)
1383 return 0;
1384 else
1385 return ops->beneath->to_stopped_data_address (ops->beneath, addr_p);
1386 }
1387
1388 /* Record registers change (by user or by GDB) to list as an instruction. */
1389
1390 static void
1391 record_full_registers_change (struct regcache *regcache, int regnum)
1392 {
1393 /* Check record_full_insn_num. */
1394 record_full_check_insn_num (0);
1395
1396 record_full_arch_list_head = NULL;
1397 record_full_arch_list_tail = NULL;
1398
1399 if (regnum < 0)
1400 {
1401 int i;
1402
1403 for (i = 0; i < gdbarch_num_regs (get_regcache_arch (regcache)); i++)
1404 {
1405 if (record_full_arch_list_add_reg (regcache, i))
1406 {
1407 record_full_list_release (record_full_arch_list_tail);
1408 error (_("Process record: failed to record execution log."));
1409 }
1410 }
1411 }
1412 else
1413 {
1414 if (record_full_arch_list_add_reg (regcache, regnum))
1415 {
1416 record_full_list_release (record_full_arch_list_tail);
1417 error (_("Process record: failed to record execution log."));
1418 }
1419 }
1420 if (record_full_arch_list_add_end ())
1421 {
1422 record_full_list_release (record_full_arch_list_tail);
1423 error (_("Process record: failed to record execution log."));
1424 }
1425 record_full_list->next = record_full_arch_list_head;
1426 record_full_arch_list_head->prev = record_full_list;
1427 record_full_list = record_full_arch_list_tail;
1428
1429 if (record_full_insn_num == record_full_insn_max_num)
1430 record_full_list_release_first ();
1431 else
1432 record_full_insn_num++;
1433 }
1434
1435 /* "to_store_registers" method for process record target. */
1436
1437 static void
1438 record_full_store_registers (struct target_ops *ops,
1439 struct regcache *regcache,
1440 int regno)
1441 {
1442 if (!record_full_gdb_operation_disable)
1443 {
1444 if (RECORD_FULL_IS_REPLAY)
1445 {
1446 int n;
1447
1448 /* Let user choose if he wants to write register or not. */
1449 if (regno < 0)
1450 n =
1451 query (_("Because GDB is in replay mode, changing the "
1452 "value of a register will make the execution "
1453 "log unusable from this point onward. "
1454 "Change all registers?"));
1455 else
1456 n =
1457 query (_("Because GDB is in replay mode, changing the value "
1458 "of a register will make the execution log unusable "
1459 "from this point onward. Change register %s?"),
1460 gdbarch_register_name (get_regcache_arch (regcache),
1461 regno));
1462
1463 if (!n)
1464 {
1465 /* Invalidate the value of regcache that was set in function
1466 "regcache_raw_write". */
1467 if (regno < 0)
1468 {
1469 int i;
1470
1471 for (i = 0;
1472 i < gdbarch_num_regs (get_regcache_arch (regcache));
1473 i++)
1474 regcache_invalidate (regcache, i);
1475 }
1476 else
1477 regcache_invalidate (regcache, regno);
1478
1479 error (_("Process record canceled the operation."));
1480 }
1481
1482 /* Destroy the record from here forward. */
1483 record_full_list_release_following (record_full_list);
1484 }
1485
1486 record_full_registers_change (regcache, regno);
1487 }
1488 ops->beneath->to_store_registers (ops->beneath, regcache, regno);
1489 }
1490
1491 /* "to_xfer_partial" method. Behavior is conditional on
1492 RECORD_FULL_IS_REPLAY.
1493 In replay mode, we cannot write memory unles we are willing to
1494 invalidate the record/replay log from this point forward. */
1495
1496 static enum target_xfer_status
1497 record_full_xfer_partial (struct target_ops *ops, enum target_object object,
1498 const char *annex, gdb_byte *readbuf,
1499 const gdb_byte *writebuf, ULONGEST offset,
1500 ULONGEST len, ULONGEST *xfered_len)
1501 {
1502 if (!record_full_gdb_operation_disable
1503 && (object == TARGET_OBJECT_MEMORY
1504 || object == TARGET_OBJECT_RAW_MEMORY) && writebuf)
1505 {
1506 if (RECORD_FULL_IS_REPLAY)
1507 {
1508 /* Let user choose if he wants to write memory or not. */
1509 if (!query (_("Because GDB is in replay mode, writing to memory "
1510 "will make the execution log unusable from this "
1511 "point onward. Write memory at address %s?"),
1512 paddress (target_gdbarch (), offset)))
1513 error (_("Process record canceled the operation."));
1514
1515 /* Destroy the record from here forward. */
1516 record_full_list_release_following (record_full_list);
1517 }
1518
1519 /* Check record_full_insn_num */
1520 record_full_check_insn_num (0);
1521
1522 /* Record registers change to list as an instruction. */
1523 record_full_arch_list_head = NULL;
1524 record_full_arch_list_tail = NULL;
1525 if (record_full_arch_list_add_mem (offset, len))
1526 {
1527 record_full_list_release (record_full_arch_list_tail);
1528 if (record_debug)
1529 fprintf_unfiltered (gdb_stdlog,
1530 "Process record: failed to record "
1531 "execution log.");
1532 return TARGET_XFER_E_IO;
1533 }
1534 if (record_full_arch_list_add_end ())
1535 {
1536 record_full_list_release (record_full_arch_list_tail);
1537 if (record_debug)
1538 fprintf_unfiltered (gdb_stdlog,
1539 "Process record: failed to record "
1540 "execution log.");
1541 return TARGET_XFER_E_IO;
1542 }
1543 record_full_list->next = record_full_arch_list_head;
1544 record_full_arch_list_head->prev = record_full_list;
1545 record_full_list = record_full_arch_list_tail;
1546
1547 if (record_full_insn_num == record_full_insn_max_num)
1548 record_full_list_release_first ();
1549 else
1550 record_full_insn_num++;
1551 }
1552
1553 return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
1554 readbuf, writebuf, offset,
1555 len, xfered_len);
1556 }
1557
1558 /* This structure represents a breakpoint inserted while the record
1559 target is active. We use this to know when to install/remove
1560 breakpoints in/from the target beneath. For example, a breakpoint
1561 may be inserted while recording, but removed when not replaying nor
1562 recording. In that case, the breakpoint had not been inserted on
1563 the target beneath, so we should not try to remove it there. */
1564
1565 struct record_full_breakpoint
1566 {
1567 /* The address and address space the breakpoint was set at. */
1568 struct address_space *address_space;
1569 CORE_ADDR addr;
1570
1571 /* True when the breakpoint has been also installed in the target
1572 beneath. This will be false for breakpoints set during replay or
1573 when recording. */
1574 int in_target_beneath;
1575 };
1576
1577 typedef struct record_full_breakpoint *record_full_breakpoint_p;
1578 DEF_VEC_P(record_full_breakpoint_p);
1579
1580 /* The list of breakpoints inserted while the record target is
1581 active. */
1582 VEC(record_full_breakpoint_p) *record_full_breakpoints = NULL;
1583
1584 static void
1585 record_full_sync_record_breakpoints (struct bp_location *loc, void *data)
1586 {
1587 if (loc->loc_type != bp_loc_software_breakpoint)
1588 return;
1589
1590 if (loc->inserted)
1591 {
1592 struct record_full_breakpoint *bp = XNEW (struct record_full_breakpoint);
1593
1594 bp->addr = loc->target_info.placed_address;
1595 bp->address_space = loc->target_info.placed_address_space;
1596
1597 bp->in_target_beneath = 1;
1598
1599 VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1600 }
1601 }
1602
1603 /* Sync existing breakpoints to record_full_breakpoints. */
1604
1605 static void
1606 record_full_init_record_breakpoints (void)
1607 {
1608 VEC_free (record_full_breakpoint_p, record_full_breakpoints);
1609
1610 iterate_over_bp_locations (record_full_sync_record_breakpoints);
1611 }
1612
1613 /* Behavior is conditional on RECORD_FULL_IS_REPLAY. We will not actually
1614 insert or remove breakpoints in the real target when replaying, nor
1615 when recording. */
1616
1617 static int
1618 record_full_insert_breakpoint (struct target_ops *ops,
1619 struct gdbarch *gdbarch,
1620 struct bp_target_info *bp_tgt)
1621 {
1622 struct record_full_breakpoint *bp;
1623 int in_target_beneath = 0;
1624
1625 if (!RECORD_FULL_IS_REPLAY)
1626 {
1627 /* When recording, we currently always single-step, so we don't
1628 really need to install regular breakpoints in the inferior.
1629 However, we do have to insert software single-step
1630 breakpoints, in case the target can't hardware step. To keep
1631 things single, we always insert. */
1632 struct cleanup *old_cleanups;
1633 int ret;
1634
1635 old_cleanups = record_full_gdb_operation_disable_set ();
1636 ret = ops->beneath->to_insert_breakpoint (ops->beneath, gdbarch, bp_tgt);
1637 do_cleanups (old_cleanups);
1638
1639 if (ret != 0)
1640 return ret;
1641
1642 in_target_beneath = 1;
1643 }
1644
1645 bp = XNEW (struct record_full_breakpoint);
1646 bp->addr = bp_tgt->placed_address;
1647 bp->address_space = bp_tgt->placed_address_space;
1648 bp->in_target_beneath = in_target_beneath;
1649 VEC_safe_push (record_full_breakpoint_p, record_full_breakpoints, bp);
1650 return 0;
1651 }
1652
1653 /* "to_remove_breakpoint" method for process record target. */
1654
1655 static int
1656 record_full_remove_breakpoint (struct target_ops *ops,
1657 struct gdbarch *gdbarch,
1658 struct bp_target_info *bp_tgt)
1659 {
1660 struct record_full_breakpoint *bp;
1661 int ix;
1662
1663 for (ix = 0;
1664 VEC_iterate (record_full_breakpoint_p,
1665 record_full_breakpoints, ix, bp);
1666 ++ix)
1667 {
1668 if (bp->addr == bp_tgt->placed_address
1669 && bp->address_space == bp_tgt->placed_address_space)
1670 {
1671 if (bp->in_target_beneath)
1672 {
1673 struct cleanup *old_cleanups;
1674 int ret;
1675
1676 old_cleanups = record_full_gdb_operation_disable_set ();
1677 ret = ops->beneath->to_remove_breakpoint (ops->beneath, gdbarch,
1678 bp_tgt);
1679 do_cleanups (old_cleanups);
1680
1681 if (ret != 0)
1682 return ret;
1683 }
1684
1685 VEC_unordered_remove (record_full_breakpoint_p,
1686 record_full_breakpoints, ix);
1687 return 0;
1688 }
1689 }
1690
1691 gdb_assert_not_reached ("removing unknown breakpoint");
1692 }
1693
1694 /* "to_can_execute_reverse" method for process record target. */
1695
1696 static int
1697 record_full_can_execute_reverse (struct target_ops *self)
1698 {
1699 return 1;
1700 }
1701
1702 /* "to_get_bookmark" method for process record and prec over core. */
1703
1704 static gdb_byte *
1705 record_full_get_bookmark (struct target_ops *self, const char *args,
1706 int from_tty)
1707 {
1708 char *ret = NULL;
1709
1710 /* Return stringified form of instruction count. */
1711 if (record_full_list && record_full_list->type == record_full_end)
1712 ret = xstrdup (pulongest (record_full_list->u.end.insn_num));
1713
1714 if (record_debug)
1715 {
1716 if (ret)
1717 fprintf_unfiltered (gdb_stdlog,
1718 "record_full_get_bookmark returns %s\n", ret);
1719 else
1720 fprintf_unfiltered (gdb_stdlog,
1721 "record_full_get_bookmark returns NULL\n");
1722 }
1723 return (gdb_byte *) ret;
1724 }
1725
1726 /* "to_goto_bookmark" method for process record and prec over core. */
1727
1728 static void
1729 record_full_goto_bookmark (struct target_ops *self,
1730 const gdb_byte *raw_bookmark, int from_tty)
1731 {
1732 const char *bookmark = (const char *) raw_bookmark;
1733 struct cleanup *cleanup = make_cleanup (null_cleanup, NULL);
1734
1735 if (record_debug)
1736 fprintf_unfiltered (gdb_stdlog,
1737 "record_full_goto_bookmark receives %s\n", bookmark);
1738
1739 if (bookmark[0] == '\'' || bookmark[0] == '\"')
1740 {
1741 char *copy;
1742
1743 if (bookmark[strlen (bookmark) - 1] != bookmark[0])
1744 error (_("Unbalanced quotes: %s"), bookmark);
1745
1746
1747 copy = savestring (bookmark + 1, strlen (bookmark) - 2);
1748 make_cleanup (xfree, copy);
1749 bookmark = copy;
1750 }
1751
1752 record_goto (bookmark);
1753
1754 do_cleanups (cleanup);
1755 }
1756
1757 static enum exec_direction_kind
1758 record_full_execution_direction (struct target_ops *self)
1759 {
1760 return record_full_execution_dir;
1761 }
1762
1763 static void
1764 record_full_info (struct target_ops *self)
1765 {
1766 struct record_full_entry *p;
1767
1768 if (RECORD_FULL_IS_REPLAY)
1769 printf_filtered (_("Replay mode:\n"));
1770 else
1771 printf_filtered (_("Record mode:\n"));
1772
1773 /* Find entry for first actual instruction in the log. */
1774 for (p = record_full_first.next;
1775 p != NULL && p->type != record_full_end;
1776 p = p->next)
1777 ;
1778
1779 /* Do we have a log at all? */
1780 if (p != NULL && p->type == record_full_end)
1781 {
1782 /* Display instruction number for first instruction in the log. */
1783 printf_filtered (_("Lowest recorded instruction number is %s.\n"),
1784 pulongest (p->u.end.insn_num));
1785
1786 /* If in replay mode, display where we are in the log. */
1787 if (RECORD_FULL_IS_REPLAY)
1788 printf_filtered (_("Current instruction number is %s.\n"),
1789 pulongest (record_full_list->u.end.insn_num));
1790
1791 /* Display instruction number for last instruction in the log. */
1792 printf_filtered (_("Highest recorded instruction number is %s.\n"),
1793 pulongest (record_full_insn_count));
1794
1795 /* Display log count. */
1796 printf_filtered (_("Log contains %u instructions.\n"),
1797 record_full_insn_num);
1798 }
1799 else
1800 printf_filtered (_("No instructions have been logged.\n"));
1801
1802 /* Display max log size. */
1803 printf_filtered (_("Max logged instructions is %u.\n"),
1804 record_full_insn_max_num);
1805 }
1806
1807 /* The "to_record_delete" target method. */
1808
1809 static void
1810 record_full_delete (struct target_ops *self)
1811 {
1812 record_full_list_release_following (record_full_list);
1813 }
1814
1815 /* The "to_record_is_replaying" target method. */
1816
1817 static int
1818 record_full_is_replaying (struct target_ops *self)
1819 {
1820 return RECORD_FULL_IS_REPLAY;
1821 }
1822
1823 /* Go to a specific entry. */
1824
1825 static void
1826 record_full_goto_entry (struct record_full_entry *p)
1827 {
1828 if (p == NULL)
1829 error (_("Target insn not found."));
1830 else if (p == record_full_list)
1831 error (_("Already at target insn."));
1832 else if (p->u.end.insn_num > record_full_list->u.end.insn_num)
1833 {
1834 printf_filtered (_("Go forward to insn number %s\n"),
1835 pulongest (p->u.end.insn_num));
1836 record_full_goto_insn (p, EXEC_FORWARD);
1837 }
1838 else
1839 {
1840 printf_filtered (_("Go backward to insn number %s\n"),
1841 pulongest (p->u.end.insn_num));
1842 record_full_goto_insn (p, EXEC_REVERSE);
1843 }
1844
1845 registers_changed ();
1846 reinit_frame_cache ();
1847 print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
1848 }
1849
1850 /* The "to_goto_record_begin" target method. */
1851
1852 static void
1853 record_full_goto_begin (struct target_ops *self)
1854 {
1855 struct record_full_entry *p = NULL;
1856
1857 for (p = &record_full_first; p != NULL; p = p->next)
1858 if (p->type == record_full_end)
1859 break;
1860
1861 record_full_goto_entry (p);
1862 }
1863
1864 /* The "to_goto_record_end" target method. */
1865
1866 static void
1867 record_full_goto_end (struct target_ops *self)
1868 {
1869 struct record_full_entry *p = NULL;
1870
1871 for (p = record_full_list; p->next != NULL; p = p->next)
1872 ;
1873 for (; p!= NULL; p = p->prev)
1874 if (p->type == record_full_end)
1875 break;
1876
1877 record_full_goto_entry (p);
1878 }
1879
1880 /* The "to_goto_record" target method. */
1881
1882 static void
1883 record_full_goto (struct target_ops *self, ULONGEST target_insn)
1884 {
1885 struct record_full_entry *p = NULL;
1886
1887 for (p = &record_full_first; p != NULL; p = p->next)
1888 if (p->type == record_full_end && p->u.end.insn_num == target_insn)
1889 break;
1890
1891 record_full_goto_entry (p);
1892 }
1893
1894 static void
1895 init_record_full_ops (void)
1896 {
1897 record_full_ops.to_shortname = "record-full";
1898 record_full_ops.to_longname = "Process record and replay target";
1899 record_full_ops.to_doc =
1900 "Log program while executing and replay execution from log.";
1901 record_full_ops.to_open = record_full_open;
1902 record_full_ops.to_close = record_full_close;
1903 record_full_ops.to_resume = record_full_resume;
1904 record_full_ops.to_wait = record_full_wait;
1905 record_full_ops.to_disconnect = record_disconnect;
1906 record_full_ops.to_detach = record_detach;
1907 record_full_ops.to_mourn_inferior = record_mourn_inferior;
1908 record_full_ops.to_kill = record_kill;
1909 record_full_ops.to_store_registers = record_full_store_registers;
1910 record_full_ops.to_xfer_partial = record_full_xfer_partial;
1911 record_full_ops.to_insert_breakpoint = record_full_insert_breakpoint;
1912 record_full_ops.to_remove_breakpoint = record_full_remove_breakpoint;
1913 record_full_ops.to_stopped_by_watchpoint = record_full_stopped_by_watchpoint;
1914 record_full_ops.to_stopped_data_address = record_full_stopped_data_address;
1915 record_full_ops.to_can_execute_reverse = record_full_can_execute_reverse;
1916 record_full_ops.to_stratum = record_stratum;
1917 /* Add bookmark target methods. */
1918 record_full_ops.to_get_bookmark = record_full_get_bookmark;
1919 record_full_ops.to_goto_bookmark = record_full_goto_bookmark;
1920 record_full_ops.to_execution_direction = record_full_execution_direction;
1921 record_full_ops.to_info_record = record_full_info;
1922 record_full_ops.to_save_record = record_full_save;
1923 record_full_ops.to_delete_record = record_full_delete;
1924 record_full_ops.to_record_is_replaying = record_full_is_replaying;
1925 record_full_ops.to_goto_record_begin = record_full_goto_begin;
1926 record_full_ops.to_goto_record_end = record_full_goto_end;
1927 record_full_ops.to_goto_record = record_full_goto;
1928 record_full_ops.to_magic = OPS_MAGIC;
1929 }
1930
1931 /* "to_resume" method for prec over corefile. */
1932
1933 static void
1934 record_full_core_resume (struct target_ops *ops, ptid_t ptid, int step,
1935 enum gdb_signal signal)
1936 {
1937 record_full_resume_step = step;
1938 record_full_resumed = 1;
1939 record_full_execution_dir = execution_direction;
1940
1941 /* We are about to start executing the inferior (or simulate it),
1942 let's register it with the event loop. */
1943 if (target_can_async_p ())
1944 {
1945 target_async (inferior_event_handler, 0);
1946
1947 /* Notify the event loop there's an event to wait for. */
1948 mark_async_event_handler (record_full_async_inferior_event_token);
1949 }
1950 }
1951
1952 /* "to_kill" method for prec over corefile. */
1953
1954 static void
1955 record_full_core_kill (struct target_ops *ops)
1956 {
1957 if (record_debug)
1958 fprintf_unfiltered (gdb_stdlog, "Process record: record_full_core_kill\n");
1959
1960 unpush_target (&record_full_core_ops);
1961 }
1962
1963 /* "to_fetch_registers" method for prec over corefile. */
1964
1965 static void
1966 record_full_core_fetch_registers (struct target_ops *ops,
1967 struct regcache *regcache,
1968 int regno)
1969 {
1970 if (regno < 0)
1971 {
1972 int num = gdbarch_num_regs (get_regcache_arch (regcache));
1973 int i;
1974
1975 for (i = 0; i < num; i ++)
1976 regcache_raw_supply (regcache, i,
1977 record_full_core_regbuf + MAX_REGISTER_SIZE * i);
1978 }
1979 else
1980 regcache_raw_supply (regcache, regno,
1981 record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
1982 }
1983
1984 /* "to_prepare_to_store" method for prec over corefile. */
1985
1986 static void
1987 record_full_core_prepare_to_store (struct target_ops *self,
1988 struct regcache *regcache)
1989 {
1990 }
1991
1992 /* "to_store_registers" method for prec over corefile. */
1993
1994 static void
1995 record_full_core_store_registers (struct target_ops *ops,
1996 struct regcache *regcache,
1997 int regno)
1998 {
1999 if (record_full_gdb_operation_disable)
2000 regcache_raw_collect (regcache, regno,
2001 record_full_core_regbuf + MAX_REGISTER_SIZE * regno);
2002 else
2003 error (_("You can't do that without a process to debug."));
2004 }
2005
2006 /* "to_xfer_partial" method for prec over corefile. */
2007
2008 static enum target_xfer_status
2009 record_full_core_xfer_partial (struct target_ops *ops,
2010 enum target_object object,
2011 const char *annex, gdb_byte *readbuf,
2012 const gdb_byte *writebuf, ULONGEST offset,
2013 ULONGEST len, ULONGEST *xfered_len)
2014 {
2015 if (object == TARGET_OBJECT_MEMORY)
2016 {
2017 if (record_full_gdb_operation_disable || !writebuf)
2018 {
2019 struct target_section *p;
2020
2021 for (p = record_full_core_start; p < record_full_core_end; p++)
2022 {
2023 if (offset >= p->addr)
2024 {
2025 struct record_full_core_buf_entry *entry;
2026 ULONGEST sec_offset;
2027
2028 if (offset >= p->endaddr)
2029 continue;
2030
2031 if (offset + len > p->endaddr)
2032 len = p->endaddr - offset;
2033
2034 sec_offset = offset - p->addr;
2035
2036 /* Read readbuf or write writebuf p, offset, len. */
2037 /* Check flags. */
2038 if (p->the_bfd_section->flags & SEC_CONSTRUCTOR
2039 || (p->the_bfd_section->flags & SEC_HAS_CONTENTS) == 0)
2040 {
2041 if (readbuf)
2042 memset (readbuf, 0, len);
2043
2044 *xfered_len = len;
2045 return TARGET_XFER_OK;
2046 }
2047 /* Get record_full_core_buf_entry. */
2048 for (entry = record_full_core_buf_list; entry;
2049 entry = entry->prev)
2050 if (entry->p == p)
2051 break;
2052 if (writebuf)
2053 {
2054 if (!entry)
2055 {
2056 /* Add a new entry. */
2057 entry = (struct record_full_core_buf_entry *)
2058 xmalloc
2059 (sizeof (struct record_full_core_buf_entry));
2060 entry->p = p;
2061 if (!bfd_malloc_and_get_section
2062 (p->the_bfd_section->owner,
2063 p->the_bfd_section,
2064 &entry->buf))
2065 {
2066 xfree (entry);
2067 return TARGET_XFER_EOF;
2068 }
2069 entry->prev = record_full_core_buf_list;
2070 record_full_core_buf_list = entry;
2071 }
2072
2073 memcpy (entry->buf + sec_offset, writebuf,
2074 (size_t) len);
2075 }
2076 else
2077 {
2078 if (!entry)
2079 return ops->beneath->to_xfer_partial (ops->beneath,
2080 object, annex,
2081 readbuf, writebuf,
2082 offset, len,
2083 xfered_len);
2084
2085 memcpy (readbuf, entry->buf + sec_offset,
2086 (size_t) len);
2087 }
2088
2089 *xfered_len = len;
2090 return TARGET_XFER_OK;
2091 }
2092 }
2093
2094 return TARGET_XFER_E_IO;
2095 }
2096 else
2097 error (_("You can't do that without a process to debug."));
2098 }
2099
2100 return ops->beneath->to_xfer_partial (ops->beneath, object, annex,
2101 readbuf, writebuf, offset, len,
2102 xfered_len);
2103 }
2104
2105 /* "to_insert_breakpoint" method for prec over corefile. */
2106
2107 static int
2108 record_full_core_insert_breakpoint (struct target_ops *ops,
2109 struct gdbarch *gdbarch,
2110 struct bp_target_info *bp_tgt)
2111 {
2112 return 0;
2113 }
2114
2115 /* "to_remove_breakpoint" method for prec over corefile. */
2116
2117 static int
2118 record_full_core_remove_breakpoint (struct target_ops *ops,
2119 struct gdbarch *gdbarch,
2120 struct bp_target_info *bp_tgt)
2121 {
2122 return 0;
2123 }
2124
2125 /* "to_has_execution" method for prec over corefile. */
2126
2127 static int
2128 record_full_core_has_execution (struct target_ops *ops, ptid_t the_ptid)
2129 {
2130 return 1;
2131 }
2132
2133 static void
2134 init_record_full_core_ops (void)
2135 {
2136 record_full_core_ops.to_shortname = "record-core";
2137 record_full_core_ops.to_longname = "Process record and replay target";
2138 record_full_core_ops.to_doc =
2139 "Log program while executing and replay execution from log.";
2140 record_full_core_ops.to_open = record_full_open;
2141 record_full_core_ops.to_close = record_full_close;
2142 record_full_core_ops.to_resume = record_full_core_resume;
2143 record_full_core_ops.to_wait = record_full_wait;
2144 record_full_core_ops.to_kill = record_full_core_kill;
2145 record_full_core_ops.to_fetch_registers = record_full_core_fetch_registers;
2146 record_full_core_ops.to_prepare_to_store = record_full_core_prepare_to_store;
2147 record_full_core_ops.to_store_registers = record_full_core_store_registers;
2148 record_full_core_ops.to_xfer_partial = record_full_core_xfer_partial;
2149 record_full_core_ops.to_insert_breakpoint
2150 = record_full_core_insert_breakpoint;
2151 record_full_core_ops.to_remove_breakpoint
2152 = record_full_core_remove_breakpoint;
2153 record_full_core_ops.to_stopped_by_watchpoint
2154 = record_full_stopped_by_watchpoint;
2155 record_full_core_ops.to_stopped_data_address
2156 = record_full_stopped_data_address;
2157 record_full_core_ops.to_can_execute_reverse
2158 = record_full_can_execute_reverse;
2159 record_full_core_ops.to_has_execution = record_full_core_has_execution;
2160 record_full_core_ops.to_stratum = record_stratum;
2161 /* Add bookmark target methods. */
2162 record_full_core_ops.to_get_bookmark = record_full_get_bookmark;
2163 record_full_core_ops.to_goto_bookmark = record_full_goto_bookmark;
2164 record_full_core_ops.to_execution_direction
2165 = record_full_execution_direction;
2166 record_full_core_ops.to_info_record = record_full_info;
2167 record_full_core_ops.to_delete_record = record_full_delete;
2168 record_full_core_ops.to_record_is_replaying = record_full_is_replaying;
2169 record_full_core_ops.to_goto_record_begin = record_full_goto_begin;
2170 record_full_core_ops.to_goto_record_end = record_full_goto_end;
2171 record_full_core_ops.to_goto_record = record_full_goto;
2172 record_full_core_ops.to_magic = OPS_MAGIC;
2173 }
2174
2175 /* Record log save-file format
2176 Version 1 (never released)
2177
2178 Header:
2179 4 bytes: magic number htonl(0x20090829).
2180 NOTE: be sure to change whenever this file format changes!
2181
2182 Records:
2183 record_full_end:
2184 1 byte: record type (record_full_end, see enum record_full_type).
2185 record_full_reg:
2186 1 byte: record type (record_full_reg, see enum record_full_type).
2187 8 bytes: register id (network byte order).
2188 MAX_REGISTER_SIZE bytes: register value.
2189 record_full_mem:
2190 1 byte: record type (record_full_mem, see enum record_full_type).
2191 8 bytes: memory length (network byte order).
2192 8 bytes: memory address (network byte order).
2193 n bytes: memory value (n == memory length).
2194
2195 Version 2
2196 4 bytes: magic number netorder32(0x20091016).
2197 NOTE: be sure to change whenever this file format changes!
2198
2199 Records:
2200 record_full_end:
2201 1 byte: record type (record_full_end, see enum record_full_type).
2202 4 bytes: signal
2203 4 bytes: instruction count
2204 record_full_reg:
2205 1 byte: record type (record_full_reg, see enum record_full_type).
2206 4 bytes: register id (network byte order).
2207 n bytes: register value (n == actual register size).
2208 (eg. 4 bytes for x86 general registers).
2209 record_full_mem:
2210 1 byte: record type (record_full_mem, see enum record_full_type).
2211 4 bytes: memory length (network byte order).
2212 8 bytes: memory address (network byte order).
2213 n bytes: memory value (n == memory length).
2214
2215 */
2216
2217 /* bfdcore_read -- read bytes from a core file section. */
2218
2219 static inline void
2220 bfdcore_read (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2221 {
2222 int ret = bfd_get_section_contents (obfd, osec, buf, *offset, len);
2223
2224 if (ret)
2225 *offset += len;
2226 else
2227 error (_("Failed to read %d bytes from core file %s ('%s')."),
2228 len, bfd_get_filename (obfd),
2229 bfd_errmsg (bfd_get_error ()));
2230 }
2231
2232 static inline uint64_t
2233 netorder64 (uint64_t input)
2234 {
2235 uint64_t ret;
2236
2237 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2238 BFD_ENDIAN_BIG, input);
2239 return ret;
2240 }
2241
2242 static inline uint32_t
2243 netorder32 (uint32_t input)
2244 {
2245 uint32_t ret;
2246
2247 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2248 BFD_ENDIAN_BIG, input);
2249 return ret;
2250 }
2251
2252 static inline uint16_t
2253 netorder16 (uint16_t input)
2254 {
2255 uint16_t ret;
2256
2257 store_unsigned_integer ((gdb_byte *) &ret, sizeof (ret),
2258 BFD_ENDIAN_BIG, input);
2259 return ret;
2260 }
2261
2262 /* Restore the execution log from a core_bfd file. */
2263 static void
2264 record_full_restore (void)
2265 {
2266 uint32_t magic;
2267 struct cleanup *old_cleanups;
2268 struct record_full_entry *rec;
2269 asection *osec;
2270 uint32_t osec_size;
2271 int bfd_offset = 0;
2272 struct regcache *regcache;
2273
2274 /* We restore the execution log from the open core bfd,
2275 if there is one. */
2276 if (core_bfd == NULL)
2277 return;
2278
2279 /* "record_full_restore" can only be called when record list is empty. */
2280 gdb_assert (record_full_first.next == NULL);
2281
2282 if (record_debug)
2283 fprintf_unfiltered (gdb_stdlog, "Restoring recording from core file.\n");
2284
2285 /* Now need to find our special note section. */
2286 osec = bfd_get_section_by_name (core_bfd, "null0");
2287 if (record_debug)
2288 fprintf_unfiltered (gdb_stdlog, "Find precord section %s.\n",
2289 osec ? "succeeded" : "failed");
2290 if (osec == NULL)
2291 return;
2292 osec_size = bfd_section_size (core_bfd, osec);
2293 if (record_debug)
2294 fprintf_unfiltered (gdb_stdlog, "%s", bfd_section_name (core_bfd, osec));
2295
2296 /* Check the magic code. */
2297 bfdcore_read (core_bfd, osec, &magic, sizeof (magic), &bfd_offset);
2298 if (magic != RECORD_FULL_FILE_MAGIC)
2299 error (_("Version mis-match or file format error in core file %s."),
2300 bfd_get_filename (core_bfd));
2301 if (record_debug)
2302 fprintf_unfiltered (gdb_stdlog,
2303 " Reading 4-byte magic cookie "
2304 "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2305 phex_nz (netorder32 (magic), 4));
2306
2307 /* Restore the entries in recfd into record_full_arch_list_head and
2308 record_full_arch_list_tail. */
2309 record_full_arch_list_head = NULL;
2310 record_full_arch_list_tail = NULL;
2311 record_full_insn_num = 0;
2312 old_cleanups = make_cleanup (record_full_arch_list_cleanups, 0);
2313 regcache = get_current_regcache ();
2314
2315 while (1)
2316 {
2317 uint8_t rectype;
2318 uint32_t regnum, len, signal, count;
2319 uint64_t addr;
2320
2321 /* We are finished when offset reaches osec_size. */
2322 if (bfd_offset >= osec_size)
2323 break;
2324 bfdcore_read (core_bfd, osec, &rectype, sizeof (rectype), &bfd_offset);
2325
2326 switch (rectype)
2327 {
2328 case record_full_reg: /* reg */
2329 /* Get register number to regnum. */
2330 bfdcore_read (core_bfd, osec, &regnum,
2331 sizeof (regnum), &bfd_offset);
2332 regnum = netorder32 (regnum);
2333
2334 rec = record_full_reg_alloc (regcache, regnum);
2335
2336 /* Get val. */
2337 bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2338 rec->u.reg.len, &bfd_offset);
2339
2340 if (record_debug)
2341 fprintf_unfiltered (gdb_stdlog,
2342 " Reading register %d (1 "
2343 "plus %lu plus %d bytes)\n",
2344 rec->u.reg.num,
2345 (unsigned long) sizeof (regnum),
2346 rec->u.reg.len);
2347 break;
2348
2349 case record_full_mem: /* mem */
2350 /* Get len. */
2351 bfdcore_read (core_bfd, osec, &len,
2352 sizeof (len), &bfd_offset);
2353 len = netorder32 (len);
2354
2355 /* Get addr. */
2356 bfdcore_read (core_bfd, osec, &addr,
2357 sizeof (addr), &bfd_offset);
2358 addr = netorder64 (addr);
2359
2360 rec = record_full_mem_alloc (addr, len);
2361
2362 /* Get val. */
2363 bfdcore_read (core_bfd, osec, record_full_get_loc (rec),
2364 rec->u.mem.len, &bfd_offset);
2365
2366 if (record_debug)
2367 fprintf_unfiltered (gdb_stdlog,
2368 " Reading memory %s (1 plus "
2369 "%lu plus %lu plus %d bytes)\n",
2370 paddress (get_current_arch (),
2371 rec->u.mem.addr),
2372 (unsigned long) sizeof (addr),
2373 (unsigned long) sizeof (len),
2374 rec->u.mem.len);
2375 break;
2376
2377 case record_full_end: /* end */
2378 rec = record_full_end_alloc ();
2379 record_full_insn_num ++;
2380
2381 /* Get signal value. */
2382 bfdcore_read (core_bfd, osec, &signal,
2383 sizeof (signal), &bfd_offset);
2384 signal = netorder32 (signal);
2385 rec->u.end.sigval = signal;
2386
2387 /* Get insn count. */
2388 bfdcore_read (core_bfd, osec, &count,
2389 sizeof (count), &bfd_offset);
2390 count = netorder32 (count);
2391 rec->u.end.insn_num = count;
2392 record_full_insn_count = count + 1;
2393 if (record_debug)
2394 fprintf_unfiltered (gdb_stdlog,
2395 " Reading record_full_end (1 + "
2396 "%lu + %lu bytes), offset == %s\n",
2397 (unsigned long) sizeof (signal),
2398 (unsigned long) sizeof (count),
2399 paddress (get_current_arch (),
2400 bfd_offset));
2401 break;
2402
2403 default:
2404 error (_("Bad entry type in core file %s."),
2405 bfd_get_filename (core_bfd));
2406 break;
2407 }
2408
2409 /* Add rec to record arch list. */
2410 record_full_arch_list_add (rec);
2411 }
2412
2413 discard_cleanups (old_cleanups);
2414
2415 /* Add record_full_arch_list_head to the end of record list. */
2416 record_full_first.next = record_full_arch_list_head;
2417 record_full_arch_list_head->prev = &record_full_first;
2418 record_full_arch_list_tail->next = NULL;
2419 record_full_list = &record_full_first;
2420
2421 /* Update record_full_insn_max_num. */
2422 if (record_full_insn_num > record_full_insn_max_num)
2423 {
2424 record_full_insn_max_num = record_full_insn_num;
2425 warning (_("Auto increase record/replay buffer limit to %u."),
2426 record_full_insn_max_num);
2427 }
2428
2429 /* Succeeded. */
2430 printf_filtered (_("Restored records from core file %s.\n"),
2431 bfd_get_filename (core_bfd));
2432
2433 print_stack_frame (get_selected_frame (NULL), 1, SRC_AND_LOC, 1);
2434 }
2435
2436 /* bfdcore_write -- write bytes into a core file section. */
2437
2438 static inline void
2439 bfdcore_write (bfd *obfd, asection *osec, void *buf, int len, int *offset)
2440 {
2441 int ret = bfd_set_section_contents (obfd, osec, buf, *offset, len);
2442
2443 if (ret)
2444 *offset += len;
2445 else
2446 error (_("Failed to write %d bytes to core file %s ('%s')."),
2447 len, bfd_get_filename (obfd),
2448 bfd_errmsg (bfd_get_error ()));
2449 }
2450
2451 /* Restore the execution log from a file. We use a modified elf
2452 corefile format, with an extra section for our data. */
2453
2454 static void
2455 cmd_record_full_restore (char *args, int from_tty)
2456 {
2457 core_file_command (args, from_tty);
2458 record_full_open (args, from_tty);
2459 }
2460
2461 static void
2462 record_full_save_cleanups (void *data)
2463 {
2464 bfd *obfd = data;
2465 char *pathname = xstrdup (bfd_get_filename (obfd));
2466
2467 gdb_bfd_unref (obfd);
2468 unlink (pathname);
2469 xfree (pathname);
2470 }
2471
2472 /* Save the execution log to a file. We use a modified elf corefile
2473 format, with an extra section for our data. */
2474
2475 static void
2476 record_full_save (struct target_ops *self, const char *recfilename)
2477 {
2478 struct record_full_entry *cur_record_full_list;
2479 uint32_t magic;
2480 struct regcache *regcache;
2481 struct gdbarch *gdbarch;
2482 struct cleanup *old_cleanups;
2483 struct cleanup *set_cleanups;
2484 bfd *obfd;
2485 int save_size = 0;
2486 asection *osec = NULL;
2487 int bfd_offset = 0;
2488
2489 /* Open the save file. */
2490 if (record_debug)
2491 fprintf_unfiltered (gdb_stdlog, "Saving execution log to core file '%s'\n",
2492 recfilename);
2493
2494 /* Open the output file. */
2495 obfd = create_gcore_bfd (recfilename);
2496 old_cleanups = make_cleanup (record_full_save_cleanups, obfd);
2497
2498 /* Save the current record entry to "cur_record_full_list". */
2499 cur_record_full_list = record_full_list;
2500
2501 /* Get the values of regcache and gdbarch. */
2502 regcache = get_current_regcache ();
2503 gdbarch = get_regcache_arch (regcache);
2504
2505 /* Disable the GDB operation record. */
2506 set_cleanups = record_full_gdb_operation_disable_set ();
2507
2508 /* Reverse execute to the begin of record list. */
2509 while (1)
2510 {
2511 /* Check for beginning and end of log. */
2512 if (record_full_list == &record_full_first)
2513 break;
2514
2515 record_full_exec_insn (regcache, gdbarch, record_full_list);
2516
2517 if (record_full_list->prev)
2518 record_full_list = record_full_list->prev;
2519 }
2520
2521 /* Compute the size needed for the extra bfd section. */
2522 save_size = 4; /* magic cookie */
2523 for (record_full_list = record_full_first.next; record_full_list;
2524 record_full_list = record_full_list->next)
2525 switch (record_full_list->type)
2526 {
2527 case record_full_end:
2528 save_size += 1 + 4 + 4;
2529 break;
2530 case record_full_reg:
2531 save_size += 1 + 4 + record_full_list->u.reg.len;
2532 break;
2533 case record_full_mem:
2534 save_size += 1 + 4 + 8 + record_full_list->u.mem.len;
2535 break;
2536 }
2537
2538 /* Make the new bfd section. */
2539 osec = bfd_make_section_anyway_with_flags (obfd, "precord",
2540 SEC_HAS_CONTENTS
2541 | SEC_READONLY);
2542 if (osec == NULL)
2543 error (_("Failed to create 'precord' section for corefile %s: %s"),
2544 recfilename,
2545 bfd_errmsg (bfd_get_error ()));
2546 bfd_set_section_size (obfd, osec, save_size);
2547 bfd_set_section_vma (obfd, osec, 0);
2548 bfd_set_section_alignment (obfd, osec, 0);
2549 bfd_section_lma (obfd, osec) = 0;
2550
2551 /* Save corefile state. */
2552 write_gcore_file (obfd);
2553
2554 /* Write out the record log. */
2555 /* Write the magic code. */
2556 magic = RECORD_FULL_FILE_MAGIC;
2557 if (record_debug)
2558 fprintf_unfiltered (gdb_stdlog,
2559 " Writing 4-byte magic cookie "
2560 "RECORD_FULL_FILE_MAGIC (0x%s)\n",
2561 phex_nz (magic, 4));
2562 bfdcore_write (obfd, osec, &magic, sizeof (magic), &bfd_offset);
2563
2564 /* Save the entries to recfd and forward execute to the end of
2565 record list. */
2566 record_full_list = &record_full_first;
2567 while (1)
2568 {
2569 /* Save entry. */
2570 if (record_full_list != &record_full_first)
2571 {
2572 uint8_t type;
2573 uint32_t regnum, len, signal, count;
2574 uint64_t addr;
2575
2576 type = record_full_list->type;
2577 bfdcore_write (obfd, osec, &type, sizeof (type), &bfd_offset);
2578
2579 switch (record_full_list->type)
2580 {
2581 case record_full_reg: /* reg */
2582 if (record_debug)
2583 fprintf_unfiltered (gdb_stdlog,
2584 " Writing register %d (1 "
2585 "plus %lu plus %d bytes)\n",
2586 record_full_list->u.reg.num,
2587 (unsigned long) sizeof (regnum),
2588 record_full_list->u.reg.len);
2589
2590 /* Write regnum. */
2591 regnum = netorder32 (record_full_list->u.reg.num);
2592 bfdcore_write (obfd, osec, &regnum,
2593 sizeof (regnum), &bfd_offset);
2594
2595 /* Write regval. */
2596 bfdcore_write (obfd, osec,
2597 record_full_get_loc (record_full_list),
2598 record_full_list->u.reg.len, &bfd_offset);
2599 break;
2600
2601 case record_full_mem: /* mem */
2602 if (record_debug)
2603 fprintf_unfiltered (gdb_stdlog,
2604 " Writing memory %s (1 plus "
2605 "%lu plus %lu plus %d bytes)\n",
2606 paddress (gdbarch,
2607 record_full_list->u.mem.addr),
2608 (unsigned long) sizeof (addr),
2609 (unsigned long) sizeof (len),
2610 record_full_list->u.mem.len);
2611
2612 /* Write memlen. */
2613 len = netorder32 (record_full_list->u.mem.len);
2614 bfdcore_write (obfd, osec, &len, sizeof (len), &bfd_offset);
2615
2616 /* Write memaddr. */
2617 addr = netorder64 (record_full_list->u.mem.addr);
2618 bfdcore_write (obfd, osec, &addr,
2619 sizeof (addr), &bfd_offset);
2620
2621 /* Write memval. */
2622 bfdcore_write (obfd, osec,
2623 record_full_get_loc (record_full_list),
2624 record_full_list->u.mem.len, &bfd_offset);
2625 break;
2626
2627 case record_full_end:
2628 if (record_debug)
2629 fprintf_unfiltered (gdb_stdlog,
2630 " Writing record_full_end (1 + "
2631 "%lu + %lu bytes)\n",
2632 (unsigned long) sizeof (signal),
2633 (unsigned long) sizeof (count));
2634 /* Write signal value. */
2635 signal = netorder32 (record_full_list->u.end.sigval);
2636 bfdcore_write (obfd, osec, &signal,
2637 sizeof (signal), &bfd_offset);
2638
2639 /* Write insn count. */
2640 count = netorder32 (record_full_list->u.end.insn_num);
2641 bfdcore_write (obfd, osec, &count,
2642 sizeof (count), &bfd_offset);
2643 break;
2644 }
2645 }
2646
2647 /* Execute entry. */
2648 record_full_exec_insn (regcache, gdbarch, record_full_list);
2649
2650 if (record_full_list->next)
2651 record_full_list = record_full_list->next;
2652 else
2653 break;
2654 }
2655
2656 /* Reverse execute to cur_record_full_list. */
2657 while (1)
2658 {
2659 /* Check for beginning and end of log. */
2660 if (record_full_list == cur_record_full_list)
2661 break;
2662
2663 record_full_exec_insn (regcache, gdbarch, record_full_list);
2664
2665 if (record_full_list->prev)
2666 record_full_list = record_full_list->prev;
2667 }
2668
2669 do_cleanups (set_cleanups);
2670 gdb_bfd_unref (obfd);
2671 discard_cleanups (old_cleanups);
2672
2673 /* Succeeded. */
2674 printf_filtered (_("Saved core file %s with execution log.\n"),
2675 recfilename);
2676 }
2677
2678 /* record_full_goto_insn -- rewind the record log (forward or backward,
2679 depending on DIR) to the given entry, changing the program state
2680 correspondingly. */
2681
2682 static void
2683 record_full_goto_insn (struct record_full_entry *entry,
2684 enum exec_direction_kind dir)
2685 {
2686 struct cleanup *set_cleanups = record_full_gdb_operation_disable_set ();
2687 struct regcache *regcache = get_current_regcache ();
2688 struct gdbarch *gdbarch = get_regcache_arch (regcache);
2689
2690 /* Assume everything is valid: we will hit the entry,
2691 and we will not hit the end of the recording. */
2692
2693 if (dir == EXEC_FORWARD)
2694 record_full_list = record_full_list->next;
2695
2696 do
2697 {
2698 record_full_exec_insn (regcache, gdbarch, record_full_list);
2699 if (dir == EXEC_REVERSE)
2700 record_full_list = record_full_list->prev;
2701 else
2702 record_full_list = record_full_list->next;
2703 } while (record_full_list != entry);
2704 do_cleanups (set_cleanups);
2705 }
2706
2707 /* Alias for "target record-full". */
2708
2709 static void
2710 cmd_record_full_start (char *args, int from_tty)
2711 {
2712 execute_command ("target record-full", from_tty);
2713 }
2714
2715 static void
2716 set_record_full_insn_max_num (char *args, int from_tty,
2717 struct cmd_list_element *c)
2718 {
2719 if (record_full_insn_num > record_full_insn_max_num)
2720 {
2721 /* Count down record_full_insn_num while releasing records from list. */
2722 while (record_full_insn_num > record_full_insn_max_num)
2723 {
2724 record_full_list_release_first ();
2725 record_full_insn_num--;
2726 }
2727 }
2728 }
2729
2730 /* The "set record full" command. */
2731
2732 static void
2733 set_record_full_command (char *args, int from_tty)
2734 {
2735 printf_unfiltered (_("\"set record full\" must be followed "
2736 "by an apporpriate subcommand.\n"));
2737 help_list (set_record_full_cmdlist, "set record full ", all_commands,
2738 gdb_stdout);
2739 }
2740
2741 /* The "show record full" command. */
2742
2743 static void
2744 show_record_full_command (char *args, int from_tty)
2745 {
2746 cmd_show_list (show_record_full_cmdlist, from_tty, "");
2747 }
2748
2749 /* Provide a prototype to silence -Wmissing-prototypes. */
2750 extern initialize_file_ftype _initialize_record_full;
2751
2752 void
2753 _initialize_record_full (void)
2754 {
2755 struct cmd_list_element *c;
2756
2757 /* Init record_full_first. */
2758 record_full_first.prev = NULL;
2759 record_full_first.next = NULL;
2760 record_full_first.type = record_full_end;
2761
2762 init_record_full_ops ();
2763 add_target (&record_full_ops);
2764 add_deprecated_target_alias (&record_full_ops, "record");
2765 init_record_full_core_ops ();
2766 add_target (&record_full_core_ops);
2767
2768 add_prefix_cmd ("full", class_obscure, cmd_record_full_start,
2769 _("Start full execution recording."), &record_full_cmdlist,
2770 "record full ", 0, &record_cmdlist);
2771
2772 c = add_cmd ("restore", class_obscure, cmd_record_full_restore,
2773 _("Restore the execution log from a file.\n\
2774 Argument is filename. File must be created with 'record save'."),
2775 &record_full_cmdlist);
2776 set_cmd_completer (c, filename_completer);
2777
2778 /* Deprecate the old version without "full" prefix. */
2779 c = add_alias_cmd ("restore", "full restore", class_obscure, 1,
2780 &record_cmdlist);
2781 set_cmd_completer (c, filename_completer);
2782 deprecate_cmd (c, "record full restore");
2783
2784 add_prefix_cmd ("full", class_support, set_record_full_command,
2785 _("Set record options"), &set_record_full_cmdlist,
2786 "set record full ", 0, &set_record_cmdlist);
2787
2788 add_prefix_cmd ("full", class_support, show_record_full_command,
2789 _("Show record options"), &show_record_full_cmdlist,
2790 "show record full ", 0, &show_record_cmdlist);
2791
2792 /* Record instructions number limit command. */
2793 add_setshow_boolean_cmd ("stop-at-limit", no_class,
2794 &record_full_stop_at_limit, _("\
2795 Set whether record/replay stops when record/replay buffer becomes full."), _("\
2796 Show whether record/replay stops when record/replay buffer becomes full."),
2797 _("Default is ON.\n\
2798 When ON, if the record/replay buffer becomes full, ask user what to do.\n\
2799 When OFF, if the record/replay buffer becomes full,\n\
2800 delete the oldest recorded instruction to make room for each new one."),
2801 NULL, NULL,
2802 &set_record_full_cmdlist, &show_record_full_cmdlist);
2803
2804 c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2805 &set_record_cmdlist);
2806 deprecate_cmd (c, "set record full stop-at-limit");
2807
2808 c = add_alias_cmd ("stop-at-limit", "full stop-at-limit", no_class, 1,
2809 &show_record_cmdlist);
2810 deprecate_cmd (c, "show record full stop-at-limit");
2811
2812 add_setshow_uinteger_cmd ("insn-number-max", no_class,
2813 &record_full_insn_max_num,
2814 _("Set record/replay buffer limit."),
2815 _("Show record/replay buffer limit."), _("\
2816 Set the maximum number of instructions to be stored in the\n\
2817 record/replay buffer. A value of either \"unlimited\" or zero means no\n\
2818 limit. Default is 200000."),
2819 set_record_full_insn_max_num,
2820 NULL, &set_record_full_cmdlist,
2821 &show_record_full_cmdlist);
2822
2823 c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2824 &set_record_cmdlist);
2825 deprecate_cmd (c, "set record full insn-number-max");
2826
2827 c = add_alias_cmd ("insn-number-max", "full insn-number-max", no_class, 1,
2828 &show_record_cmdlist);
2829 deprecate_cmd (c, "show record full insn-number-max");
2830
2831 add_setshow_boolean_cmd ("memory-query", no_class,
2832 &record_full_memory_query, _("\
2833 Set whether query if PREC cannot record memory change of next instruction."),
2834 _("\
2835 Show whether query if PREC cannot record memory change of next instruction."),
2836 _("\
2837 Default is OFF.\n\
2838 When ON, query if PREC cannot record memory change of next instruction."),
2839 NULL, NULL,
2840 &set_record_full_cmdlist,
2841 &show_record_full_cmdlist);
2842
2843 c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
2844 &set_record_cmdlist);
2845 deprecate_cmd (c, "set record full memory-query");
2846
2847 c = add_alias_cmd ("memory-query", "full memory-query", no_class, 1,
2848 &show_record_cmdlist);
2849 deprecate_cmd (c, "show record full memory-query");
2850 }
This page took 0.105142 seconds and 5 git commands to generate.