1 /* Remote debugging interface for MIPS remote debugging protocol.
3 Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
4 2003, 2004, 2006, 2007 Free Software Foundation, Inc.
6 Contributed by Cygnus Support. Written by Ian Lance Taylor
9 This file is part of GDB.
11 This program is free software; you can redistribute it and/or modify
12 it under the terms of the GNU General Public License as published by
13 the Free Software Foundation; either version 2 of the License, or
14 (at your option) any later version.
16 This program is distributed in the hope that it will be useful,
17 but WITHOUT ANY WARRANTY; without even the implied warranty of
18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 GNU General Public License for more details.
21 You should have received a copy of the GNU General Public License
22 along with this program; if not, write to the Free Software
23 Foundation, Inc., 51 Franklin Street, Fifth Floor,
24 Boston, MA 02110-1301, USA. */
34 #include "exceptions.h"
35 #include "gdb_string.h"
39 #include "mips-tdep.h"
42 /* Breakpoint types. Values 0, 1, and 2 must agree with the watch
43 types passed by breakpoint.c to target_insert_watchpoint.
44 Value 3 is our own invention, and is used for ordinary instruction
45 breakpoints. Value 4 is used to mark an unused watchpoint in tables. */
55 /* Prototypes for local functions. */
57 static int mips_readchar (int timeout
);
59 static int mips_receive_header (unsigned char *hdr
, int *pgarbage
,
62 static int mips_receive_trailer (unsigned char *trlr
, int *pgarbage
,
63 int *pch
, int timeout
);
65 static int mips_cksum (const unsigned char *hdr
,
66 const unsigned char *data
, int len
);
68 static void mips_send_packet (const char *s
, int get_ack
);
70 static void mips_send_command (const char *cmd
, int prompt
);
72 static int mips_receive_packet (char *buff
, int throw_error
, int timeout
);
74 static ULONGEST
mips_request (int cmd
, ULONGEST addr
, ULONGEST data
,
75 int *perr
, int timeout
, char *buff
);
77 static void mips_initialize (void);
79 static void mips_open (char *name
, int from_tty
);
81 static void pmon_open (char *name
, int from_tty
);
83 static void ddb_open (char *name
, int from_tty
);
85 static void lsi_open (char *name
, int from_tty
);
87 static void mips_close (int quitting
);
89 static void mips_detach (char *args
, int from_tty
);
91 static void mips_resume (ptid_t ptid
, int step
,
92 enum target_signal siggnal
);
94 static ptid_t
mips_wait (ptid_t ptid
,
95 struct target_waitstatus
*status
);
97 static int mips_map_regno (int regno
);
99 static void mips_fetch_registers (struct regcache
*regcache
, int regno
);
101 static void mips_prepare_to_store (struct regcache
*regcache
);
103 static void mips_store_registers (struct regcache
*regcache
, int regno
);
105 static unsigned int mips_fetch_word (CORE_ADDR addr
);
107 static int mips_store_word (CORE_ADDR addr
, unsigned int value
,
110 static int mips_xfer_memory (CORE_ADDR memaddr
, gdb_byte
*myaddr
, int len
,
112 struct mem_attrib
*attrib
,
113 struct target_ops
*target
);
115 static void mips_files_info (struct target_ops
*ignore
);
117 static void mips_mourn_inferior (void);
119 static int pmon_makeb64 (unsigned long v
, char *p
, int n
, int *chksum
);
121 static int pmon_zeroset (int recsize
, char **buff
, int *amount
,
122 unsigned int *chksum
);
124 static int pmon_checkset (int recsize
, char **buff
, int *value
);
126 static void pmon_make_fastrec (char **outbuf
, unsigned char *inbuf
,
127 int *inptr
, int inamount
, int *recsize
,
128 unsigned int *csum
, unsigned int *zerofill
);
130 static int pmon_check_ack (char *mesg
);
132 static void pmon_start_download (void);
134 static void pmon_end_download (int final
, int bintotal
);
136 static void pmon_download (char *buffer
, int length
);
138 static void pmon_load_fast (char *file
);
140 static void mips_load (char *file
, int from_tty
);
142 static int mips_make_srec (char *buffer
, int type
, CORE_ADDR memaddr
,
143 unsigned char *myaddr
, int len
);
145 static int set_breakpoint (CORE_ADDR addr
, int len
, enum break_type type
);
147 static int clear_breakpoint (CORE_ADDR addr
, int len
, enum break_type type
);
149 static int common_breakpoint (int set
, CORE_ADDR addr
, int len
,
150 enum break_type type
);
152 /* Forward declarations. */
153 extern struct target_ops mips_ops
;
154 extern struct target_ops pmon_ops
;
155 extern struct target_ops ddb_ops
;
157 /* The MIPS remote debugging interface is built on top of a simple
158 packet protocol. Each packet is organized as follows:
160 SYN The first character is always a SYN (ASCII 026, or ^V). SYN
161 may not appear anywhere else in the packet. Any time a SYN is
162 seen, a new packet should be assumed to have begun.
165 This byte contains the upper five bits of the logical length
166 of the data section, plus a single bit indicating whether this
167 is a data packet or an acknowledgement. The documentation
168 indicates that this bit is 1 for a data packet, but the actual
169 board uses 1 for an acknowledgement. The value of the byte is
170 0x40 + (ack ? 0x20 : 0) + (len >> 6)
171 (we always have 0 <= len < 1024). Acknowledgement packets do
172 not carry data, and must have a data length of 0.
174 LEN1 This byte contains the lower six bits of the logical length of
175 the data section. The value is
178 SEQ This byte contains the six bit sequence number of the packet.
181 An acknowlegment packet contains the sequence number of the
182 packet being acknowledged plus 1 modulo 64. Data packets are
183 transmitted in sequence. There may only be one outstanding
184 unacknowledged data packet at a time. The sequence numbers
185 are independent in each direction. If an acknowledgement for
186 the previous packet is received (i.e., an acknowledgement with
187 the sequence number of the packet just sent) the packet just
188 sent should be retransmitted. If no acknowledgement is
189 received within a timeout period, the packet should be
190 retransmitted. This has an unfortunate failure condition on a
191 high-latency line, as a delayed acknowledgement may lead to an
192 endless series of duplicate packets.
194 DATA The actual data bytes follow. The following characters are
195 escaped inline with DLE (ASCII 020, or ^P):
201 The additional DLE characters are not counted in the logical
202 length stored in the TYPE_LEN and LEN1 bytes.
207 These bytes contain an 18 bit checksum of the complete
208 contents of the packet excluding the SEQ byte and the
209 CSUM[123] bytes. The checksum is simply the twos complement
210 addition of all the bytes treated as unsigned characters. The
211 values of the checksum bytes are:
212 CSUM1: 0x40 + ((cksum >> 12) & 0x3f)
213 CSUM2: 0x40 + ((cksum >> 6) & 0x3f)
214 CSUM3: 0x40 + (cksum & 0x3f)
216 It happens that the MIPS remote debugging protocol always
217 communicates with ASCII strings. Because of this, this
218 implementation doesn't bother to handle the DLE quoting mechanism,
219 since it will never be required. */
223 /* The SYN character which starts each packet. */
226 /* The 0x40 used to offset each packet (this value ensures that all of
227 the header and trailer bytes, other than SYN, are printable ASCII
229 #define HDR_OFFSET 0x40
231 /* The indices of the bytes in the packet header. */
232 #define HDR_INDX_SYN 0
233 #define HDR_INDX_TYPE_LEN 1
234 #define HDR_INDX_LEN1 2
235 #define HDR_INDX_SEQ 3
238 /* The data/ack bit in the TYPE_LEN header byte. */
239 #define TYPE_LEN_DA_BIT 0x20
240 #define TYPE_LEN_DATA 0
241 #define TYPE_LEN_ACK TYPE_LEN_DA_BIT
243 /* How to compute the header bytes. */
244 #define HDR_SET_SYN(data, len, seq) (SYN)
245 #define HDR_SET_TYPE_LEN(data, len, seq) \
247 + ((data) ? TYPE_LEN_DATA : TYPE_LEN_ACK) \
248 + (((len) >> 6) & 0x1f))
249 #define HDR_SET_LEN1(data, len, seq) (HDR_OFFSET + ((len) & 0x3f))
250 #define HDR_SET_SEQ(data, len, seq) (HDR_OFFSET + (seq))
252 /* Check that a header byte is reasonable. */
253 #define HDR_CHECK(ch) (((ch) & HDR_OFFSET) == HDR_OFFSET)
255 /* Get data from the header. These macros evaluate their argument
257 #define HDR_IS_DATA(hdr) \
258 (((hdr)[HDR_INDX_TYPE_LEN] & TYPE_LEN_DA_BIT) == TYPE_LEN_DATA)
259 #define HDR_GET_LEN(hdr) \
260 ((((hdr)[HDR_INDX_TYPE_LEN] & 0x1f) << 6) + (((hdr)[HDR_INDX_LEN1] & 0x3f)))
261 #define HDR_GET_SEQ(hdr) ((unsigned int)(hdr)[HDR_INDX_SEQ] & 0x3f)
263 /* The maximum data length. */
264 #define DATA_MAXLEN 1023
266 /* The trailer offset. */
267 #define TRLR_OFFSET HDR_OFFSET
269 /* The indices of the bytes in the packet trailer. */
270 #define TRLR_INDX_CSUM1 0
271 #define TRLR_INDX_CSUM2 1
272 #define TRLR_INDX_CSUM3 2
273 #define TRLR_LENGTH 3
275 /* How to compute the trailer bytes. */
276 #define TRLR_SET_CSUM1(cksum) (TRLR_OFFSET + (((cksum) >> 12) & 0x3f))
277 #define TRLR_SET_CSUM2(cksum) (TRLR_OFFSET + (((cksum) >> 6) & 0x3f))
278 #define TRLR_SET_CSUM3(cksum) (TRLR_OFFSET + (((cksum) ) & 0x3f))
280 /* Check that a trailer byte is reasonable. */
281 #define TRLR_CHECK(ch) (((ch) & TRLR_OFFSET) == TRLR_OFFSET)
283 /* Get data from the trailer. This evaluates its argument multiple
285 #define TRLR_GET_CKSUM(trlr) \
286 ((((trlr)[TRLR_INDX_CSUM1] & 0x3f) << 12) \
287 + (((trlr)[TRLR_INDX_CSUM2] & 0x3f) << 6) \
288 + ((trlr)[TRLR_INDX_CSUM3] & 0x3f))
290 /* The sequence number modulos. */
291 #define SEQ_MODULOS (64)
293 /* PMON commands to load from the serial port or UDP socket. */
294 #define LOAD_CMD "load -b -s tty0\r"
295 #define LOAD_CMD_UDP "load -b -s udp\r"
297 /* The target vectors for the four different remote MIPS targets.
298 These are initialized with code in _initialize_remote_mips instead
299 of static initializers, to make it easier to extend the target_ops
301 struct target_ops mips_ops
, pmon_ops
, ddb_ops
, lsi_ops
;
303 enum mips_monitor_type
305 /* IDT/SIM monitor being used: */
307 /* PMON monitor being used: */
308 MON_PMON
, /* 3.0.83 [COGENT,EB,FP,NET] Algorithmics Ltd. Nov 9 1995 17:19:50 */
309 MON_DDB
, /* 2.7.473 [DDBVR4300,EL,FP,NET] Risq Modular Systems, Thu Jun 6 09:28:40 PDT 1996 */
310 MON_LSI
, /* 4.3.12 [EB,FP], LSI LOGIC Corp. Tue Feb 25 13:22:14 1997 */
311 /* Last and unused value, for sizing vectors, etc. */
314 static enum mips_monitor_type mips_monitor
= MON_LAST
;
316 /* The monitor prompt text. If the user sets the PMON prompt
317 to some new value, the GDB `set monitor-prompt' command must also
318 be used to inform GDB about the expected prompt. Otherwise, GDB
319 will not be able to connect to PMON in mips_initialize().
320 If the `set monitor-prompt' command is not used, the expected
321 default prompt will be set according the target:
328 static char *mips_monitor_prompt
;
330 /* Set to 1 if the target is open. */
331 static int mips_is_open
;
333 /* Currently active target description (if mips_is_open == 1) */
334 static struct target_ops
*current_ops
;
336 /* Set to 1 while the connection is being initialized. */
337 static int mips_initializing
;
339 /* Set to 1 while the connection is being brought down. */
340 static int mips_exiting
;
342 /* The next sequence number to send. */
343 static unsigned int mips_send_seq
;
345 /* The next sequence number we expect to receive. */
346 static unsigned int mips_receive_seq
;
348 /* The time to wait before retransmitting a packet, in seconds. */
349 static int mips_retransmit_wait
= 3;
351 /* The number of times to try retransmitting a packet before giving up. */
352 static int mips_send_retries
= 10;
354 /* The number of garbage characters to accept when looking for an
355 SYN for the next packet. */
356 static int mips_syn_garbage
= 10;
358 /* The time to wait for a packet, in seconds. */
359 static int mips_receive_wait
= 5;
361 /* Set if we have sent a packet to the board but have not yet received
363 static int mips_need_reply
= 0;
365 /* Handle used to access serial I/O stream. */
366 static struct serial
*mips_desc
;
368 /* UDP handle used to download files to target. */
369 static struct serial
*udp_desc
;
370 static int udp_in_use
;
372 /* TFTP filename used to download files to DDB board, in the form
374 static char *tftp_name
; /* host:filename */
375 static char *tftp_localname
; /* filename portion of above */
376 static int tftp_in_use
;
377 static FILE *tftp_file
;
379 /* Counts the number of times the user tried to interrupt the target (usually
381 static int interrupt_count
;
383 /* If non-zero, means that the target is running. */
384 static int mips_wait_flag
= 0;
386 /* If non-zero, monitor supports breakpoint commands. */
387 static int monitor_supports_breakpoints
= 0;
389 /* Data cache header. */
391 #if 0 /* not used (yet?) */
392 static DCACHE
*mips_dcache
;
395 /* Non-zero means that we've just hit a read or write watchpoint */
396 static int hit_watchpoint
;
398 /* Table of breakpoints/watchpoints (used only on LSI PMON target).
399 The table is indexed by a breakpoint number, which is an integer
400 from 0 to 255 returned by the LSI PMON when a breakpoint is set.
402 #define MAX_LSI_BREAKPOINTS 256
403 struct lsi_breakpoint_info
405 enum break_type type
; /* type of breakpoint */
406 CORE_ADDR addr
; /* address of breakpoint */
407 int len
; /* length of region being watched */
408 unsigned long value
; /* value to watch */
410 lsi_breakpoints
[MAX_LSI_BREAKPOINTS
];
412 /* Error/warning codes returned by LSI PMON for breakpoint commands.
413 Warning values may be ORed together; error values may not. */
414 #define W_WARN 0x100 /* This bit is set if the error code is a warning */
415 #define W_MSK 0x101 /* warning: Range feature is supported via mask */
416 #define W_VAL 0x102 /* warning: Value check is not supported in hardware */
417 #define W_QAL 0x104 /* warning: Requested qualifiers are not supported in hardware */
419 #define E_ERR 0x200 /* This bit is set if the error code is an error */
420 #define E_BPT 0x200 /* error: No such breakpoint number */
421 #define E_RGE 0x201 /* error: Range is not supported */
422 #define E_QAL 0x202 /* error: The requested qualifiers can not be used */
423 #define E_OUT 0x203 /* error: Out of hardware resources */
424 #define E_NON 0x204 /* error: Hardware breakpoint not supported */
428 int code
; /* error code */
429 char *string
; /* string associated with this code */
432 struct lsi_error lsi_warning_table
[] =
434 {W_MSK
, "Range feature is supported via mask"},
435 {W_VAL
, "Value check is not supported in hardware"},
436 {W_QAL
, "Requested qualifiers are not supported in hardware"},
440 struct lsi_error lsi_error_table
[] =
442 {E_BPT
, "No such breakpoint number"},
443 {E_RGE
, "Range is not supported"},
444 {E_QAL
, "The requested qualifiers can not be used"},
445 {E_OUT
, "Out of hardware resources"},
446 {E_NON
, "Hardware breakpoint not supported"},
450 /* Set to 1 with the 'set monitor-warnings' command to enable printing
451 of warnings returned by PMON when hardware breakpoints are used. */
452 static int monitor_warnings
;
459 serial_close (mips_desc
);
463 serial_close (udp_desc
);
469 /* Handle low-level error that we can't recover from. Note that just
470 error()ing out from target_wait or some such low-level place will cause
471 all hell to break loose--the rest of GDB will tend to get left in an
472 inconsistent state. */
475 mips_error (char *string
,...)
479 va_start (args
, string
);
481 target_terminal_ours ();
482 wrap_here (""); /* Force out any buffered output */
483 gdb_flush (gdb_stdout
);
485 fputs_filtered (error_pre_print
, gdb_stderr
);
486 vfprintf_filtered (gdb_stderr
, string
, args
);
487 fprintf_filtered (gdb_stderr
, "\n");
489 gdb_flush (gdb_stderr
);
491 /* Clean up in such a way that mips_close won't try to talk to the
492 board (it almost surely won't work since we weren't able to talk to
496 printf_unfiltered ("Ending remote MIPS debugging.\n");
497 target_mourn_inferior ();
499 deprecated_throw_reason (RETURN_ERROR
);
502 /* putc_readable - print a character, displaying non-printable chars in
503 ^x notation or in hex. */
506 fputc_readable (int ch
, struct ui_file
*file
)
509 fputc_unfiltered ('\n', file
);
511 fprintf_unfiltered (file
, "\\r");
512 else if (ch
< 0x20) /* ASCII control character */
513 fprintf_unfiltered (file
, "^%c", ch
+ '@');
514 else if (ch
>= 0x7f) /* non-ASCII characters (rubout or greater) */
515 fprintf_unfiltered (file
, "[%02x]", ch
& 0xff);
517 fputc_unfiltered (ch
, file
);
521 /* puts_readable - print a string, displaying non-printable chars in
522 ^x notation or in hex. */
525 fputs_readable (const char *string
, struct ui_file
*file
)
529 while ((c
= *string
++) != '\0')
530 fputc_readable (c
, file
);
534 /* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if
535 timed out. TIMEOUT specifies timeout value in seconds.
539 mips_expect_timeout (const char *string
, int timeout
)
541 const char *p
= string
;
545 fprintf_unfiltered (gdb_stdlog
, "Expected \"");
546 fputs_readable (string
, gdb_stdlog
);
547 fprintf_unfiltered (gdb_stdlog
, "\", got \"");
555 /* Must use serial_readchar() here cuz mips_readchar would get
556 confused if we were waiting for the mips_monitor_prompt... */
558 c
= serial_readchar (mips_desc
, timeout
);
560 if (c
== SERIAL_TIMEOUT
)
563 fprintf_unfiltered (gdb_stdlog
, "\": FAIL\n");
568 fputc_readable (c
, gdb_stdlog
);
576 fprintf_unfiltered (gdb_stdlog
, "\": OK\n");
589 /* Wait until STRING shows up in mips_desc. Returns 1 if successful, else 0 if
590 timed out. The timeout value is hard-coded to 2 seconds. Use
591 mips_expect_timeout if a different timeout value is needed.
595 mips_expect (const char *string
)
597 return mips_expect_timeout (string
, remote_timeout
);
600 /* Read a character from the remote, aborting on error. Returns
601 SERIAL_TIMEOUT on timeout (since that's what serial_readchar()
602 returns). FIXME: If we see the string mips_monitor_prompt from the
603 board, then we are debugging on the main console port, and we have
604 somehow dropped out of remote debugging mode. In this case, we
605 automatically go back in to remote debugging mode. This is a hack,
606 put in because I can't find any way for a program running on the
607 remote board to terminate without also ending remote debugging
608 mode. I assume users won't have any trouble with this; for one
609 thing, the IDT documentation generally assumes that the remote
610 debugging port is not the console port. This is, however, very
611 convenient for DejaGnu when you only have one connected serial
615 mips_readchar (int timeout
)
618 static int state
= 0;
619 int mips_monitor_prompt_len
= strlen (mips_monitor_prompt
);
625 if (i
== -1 && watchdog
> 0)
629 if (state
== mips_monitor_prompt_len
)
631 ch
= serial_readchar (mips_desc
, timeout
);
633 if (ch
== SERIAL_TIMEOUT
&& timeout
== -1) /* Watchdog went off */
635 target_mourn_inferior ();
636 error ("Watchdog has expired. Target detached.\n");
639 if (ch
== SERIAL_EOF
)
640 mips_error ("End of file from remote");
641 if (ch
== SERIAL_ERROR
)
642 mips_error ("Error reading from remote: %s", safe_strerror (errno
));
643 if (remote_debug
> 1)
645 /* Don't use _filtered; we can't deal with a QUIT out of
646 target_wait, and I think this might be called from there. */
647 if (ch
!= SERIAL_TIMEOUT
)
648 fprintf_unfiltered (gdb_stdlog
, "Read '%c' %d 0x%x\n", ch
, ch
, ch
);
650 fprintf_unfiltered (gdb_stdlog
, "Timed out in read\n");
653 /* If we have seen mips_monitor_prompt and we either time out, or
654 we see a @ (which was echoed from a packet we sent), reset the
655 board as described above. The first character in a packet after
656 the SYN (which is not echoed) is always an @ unless the packet is
657 more than 64 characters long, which ours never are. */
658 if ((ch
== SERIAL_TIMEOUT
|| ch
== '@')
659 && state
== mips_monitor_prompt_len
660 && !mips_initializing
663 if (remote_debug
> 0)
664 /* Don't use _filtered; we can't deal with a QUIT out of
665 target_wait, and I think this might be called from there. */
666 fprintf_unfiltered (gdb_stdlog
, "Reinitializing MIPS debugging mode\n");
673 /* At this point, about the only thing we can do is abort the command
674 in progress and get back to command level as quickly as possible. */
676 error ("Remote board reset, debug protocol re-initialized.");
679 if (ch
== mips_monitor_prompt
[state
])
687 /* Get a packet header, putting the data in the supplied buffer.
688 PGARBAGE is a pointer to the number of garbage characters received
689 so far. CH is the last character received. Returns 0 for success,
690 or -1 for timeout. */
693 mips_receive_header (unsigned char *hdr
, int *pgarbage
, int ch
, int timeout
)
699 /* Wait for a SYN. mips_syn_garbage is intended to prevent
700 sitting here indefinitely if the board sends us one garbage
701 character per second. ch may already have a value from the
702 last time through the loop. */
705 ch
= mips_readchar (timeout
);
706 if (ch
== SERIAL_TIMEOUT
)
710 /* Printing the character here lets the user of gdb see
711 what the program is outputting, if the debugging is
712 being done on the console port. Don't use _filtered:
713 we can't deal with a QUIT out of target_wait and
714 buffered target output confuses the user. */
715 if (!mips_initializing
|| remote_debug
> 0)
717 if (isprint (ch
) || isspace (ch
))
719 fputc_unfiltered (ch
, gdb_stdtarg
);
723 fputc_readable (ch
, gdb_stdtarg
);
725 gdb_flush (gdb_stdtarg
);
728 /* Only count unprintable characters. */
729 if (! (isprint (ch
) || isspace (ch
)))
732 if (mips_syn_garbage
> 0
733 && *pgarbage
> mips_syn_garbage
)
734 mips_error ("Debug protocol failure: more than %d characters before a sync.",
739 /* Get the packet header following the SYN. */
740 for (i
= 1; i
< HDR_LENGTH
; i
++)
742 ch
= mips_readchar (timeout
);
743 if (ch
== SERIAL_TIMEOUT
)
745 /* Make sure this is a header byte. */
746 if (ch
== SYN
|| !HDR_CHECK (ch
))
752 /* If we got the complete header, we can return. Otherwise we
753 loop around and keep looking for SYN. */
759 /* Get a packet header, putting the data in the supplied buffer.
760 PGARBAGE is a pointer to the number of garbage characters received
761 so far. The last character read is returned in *PCH. Returns 0
762 for success, -1 for timeout, -2 for error. */
765 mips_receive_trailer (unsigned char *trlr
, int *pgarbage
, int *pch
, int timeout
)
770 for (i
= 0; i
< TRLR_LENGTH
; i
++)
772 ch
= mips_readchar (timeout
);
774 if (ch
== SERIAL_TIMEOUT
)
776 if (!TRLR_CHECK (ch
))
783 /* Get the checksum of a packet. HDR points to the packet header.
784 DATA points to the packet data. LEN is the length of DATA. */
787 mips_cksum (const unsigned char *hdr
, const unsigned char *data
, int len
)
789 const unsigned char *p
;
795 /* The initial SYN is not included in the checksum. */
809 /* Send a packet containing the given ASCII string. */
812 mips_send_packet (const char *s
, int get_ack
)
814 /* unsigned */ int len
;
815 unsigned char *packet
;
820 if (len
> DATA_MAXLEN
)
821 mips_error ("MIPS protocol data packet too long: %s", s
);
823 packet
= (unsigned char *) alloca (HDR_LENGTH
+ len
+ TRLR_LENGTH
+ 1);
825 packet
[HDR_INDX_SYN
] = HDR_SET_SYN (1, len
, mips_send_seq
);
826 packet
[HDR_INDX_TYPE_LEN
] = HDR_SET_TYPE_LEN (1, len
, mips_send_seq
);
827 packet
[HDR_INDX_LEN1
] = HDR_SET_LEN1 (1, len
, mips_send_seq
);
828 packet
[HDR_INDX_SEQ
] = HDR_SET_SEQ (1, len
, mips_send_seq
);
830 memcpy (packet
+ HDR_LENGTH
, s
, len
);
832 cksum
= mips_cksum (packet
, packet
+ HDR_LENGTH
, len
);
833 packet
[HDR_LENGTH
+ len
+ TRLR_INDX_CSUM1
] = TRLR_SET_CSUM1 (cksum
);
834 packet
[HDR_LENGTH
+ len
+ TRLR_INDX_CSUM2
] = TRLR_SET_CSUM2 (cksum
);
835 packet
[HDR_LENGTH
+ len
+ TRLR_INDX_CSUM3
] = TRLR_SET_CSUM3 (cksum
);
837 /* Increment the sequence number. This will set mips_send_seq to
838 the sequence number we expect in the acknowledgement. */
839 mips_send_seq
= (mips_send_seq
+ 1) % SEQ_MODULOS
;
841 /* We can only have one outstanding data packet, so we just wait for
842 the acknowledgement here. Keep retransmitting the packet until
843 we get one, or until we've tried too many times. */
844 for (try = 0; try < mips_send_retries
; try++)
849 if (remote_debug
> 0)
851 /* Don't use _filtered; we can't deal with a QUIT out of
852 target_wait, and I think this might be called from there. */
853 packet
[HDR_LENGTH
+ len
+ TRLR_LENGTH
] = '\0';
854 fprintf_unfiltered (gdb_stdlog
, "Writing \"%s\"\n", packet
+ 1);
857 if (serial_write (mips_desc
, packet
,
858 HDR_LENGTH
+ len
+ TRLR_LENGTH
) != 0)
859 mips_error ("write to target failed: %s", safe_strerror (errno
));
868 unsigned char hdr
[HDR_LENGTH
+ 1];
869 unsigned char trlr
[TRLR_LENGTH
+ 1];
873 /* Get the packet header. If we time out, resend the data
875 err
= mips_receive_header (hdr
, &garbage
, ch
, mips_retransmit_wait
);
881 /* If we get a data packet, assume it is a duplicate and
882 ignore it. FIXME: If the acknowledgement is lost, this
883 data packet may be the packet the remote sends after the
885 if (HDR_IS_DATA (hdr
))
889 /* Ignore any errors raised whilst attempting to ignore
892 len
= HDR_GET_LEN (hdr
);
894 for (i
= 0; i
< len
; i
++)
898 rch
= mips_readchar (remote_timeout
);
904 if (rch
== SERIAL_TIMEOUT
)
906 /* ignore the character */
910 (void) mips_receive_trailer (trlr
, &garbage
, &ch
,
913 /* We don't bother checking the checksum, or providing an
914 ACK to the packet. */
918 /* If the length is not 0, this is a garbled packet. */
919 if (HDR_GET_LEN (hdr
) != 0)
922 /* Get the packet trailer. */
923 err
= mips_receive_trailer (trlr
, &garbage
, &ch
,
924 mips_retransmit_wait
);
926 /* If we timed out, resend the data packet. */
930 /* If we got a bad character, reread the header. */
934 /* If the checksum does not match the trailer checksum, this
935 is a bad packet; ignore it. */
936 if (mips_cksum (hdr
, (unsigned char *) NULL
, 0)
937 != TRLR_GET_CKSUM (trlr
))
940 if (remote_debug
> 0)
942 hdr
[HDR_LENGTH
] = '\0';
943 trlr
[TRLR_LENGTH
] = '\0';
944 /* Don't use _filtered; we can't deal with a QUIT out of
945 target_wait, and I think this might be called from there. */
946 fprintf_unfiltered (gdb_stdlog
, "Got ack %d \"%s%s\"\n",
947 HDR_GET_SEQ (hdr
), hdr
+ 1, trlr
);
950 /* If this ack is for the current packet, we're done. */
951 seq
= HDR_GET_SEQ (hdr
);
952 if (seq
== mips_send_seq
)
955 /* If this ack is for the last packet, resend the current
957 if ((seq
+ 1) % SEQ_MODULOS
== mips_send_seq
)
960 /* Otherwise this is a bad ack; ignore it. Increment the
961 garbage count to ensure that we do not stay in this loop
967 mips_error ("Remote did not acknowledge packet");
970 /* Receive and acknowledge a packet, returning the data in BUFF (which
971 should be DATA_MAXLEN + 1 bytes). The protocol documentation
972 implies that only the sender retransmits packets, so this code just
973 waits silently for a packet. It returns the length of the received
974 packet. If THROW_ERROR is nonzero, call error() on errors. If not,
975 don't print an error message and return -1. */
978 mips_receive_packet (char *buff
, int throw_error
, int timeout
)
983 unsigned char ack
[HDR_LENGTH
+ TRLR_LENGTH
+ 1];
990 unsigned char hdr
[HDR_LENGTH
];
991 unsigned char trlr
[TRLR_LENGTH
];
995 if (mips_receive_header (hdr
, &garbage
, ch
, timeout
) != 0)
998 mips_error ("Timed out waiting for remote packet");
1005 /* An acknowledgement is probably a duplicate; ignore it. */
1006 if (!HDR_IS_DATA (hdr
))
1008 len
= HDR_GET_LEN (hdr
);
1009 /* Check if the length is valid for an ACK, we may aswell
1010 try and read the remainder of the packet: */
1013 /* Ignore the error condition, since we are going to
1014 ignore the packet anyway. */
1015 (void) mips_receive_trailer (trlr
, &garbage
, &ch
, timeout
);
1017 /* Don't use _filtered; we can't deal with a QUIT out of
1018 target_wait, and I think this might be called from there. */
1019 if (remote_debug
> 0)
1020 fprintf_unfiltered (gdb_stdlog
, "Ignoring unexpected ACK\n");
1024 len
= HDR_GET_LEN (hdr
);
1025 for (i
= 0; i
< len
; i
++)
1029 rch
= mips_readchar (timeout
);
1035 if (rch
== SERIAL_TIMEOUT
)
1038 mips_error ("Timed out waiting for remote packet");
1047 /* Don't use _filtered; we can't deal with a QUIT out of
1048 target_wait, and I think this might be called from there. */
1049 if (remote_debug
> 0)
1050 fprintf_unfiltered (gdb_stdlog
,
1051 "Got new SYN after %d chars (wanted %d)\n",
1056 err
= mips_receive_trailer (trlr
, &garbage
, &ch
, timeout
);
1060 mips_error ("Timed out waiting for packet");
1066 /* Don't use _filtered; we can't deal with a QUIT out of
1067 target_wait, and I think this might be called from there. */
1068 if (remote_debug
> 0)
1069 fprintf_unfiltered (gdb_stdlog
, "Got SYN when wanted trailer\n");
1073 /* If this is the wrong sequence number, ignore it. */
1074 if (HDR_GET_SEQ (hdr
) != mips_receive_seq
)
1076 /* Don't use _filtered; we can't deal with a QUIT out of
1077 target_wait, and I think this might be called from there. */
1078 if (remote_debug
> 0)
1079 fprintf_unfiltered (gdb_stdlog
,
1080 "Ignoring sequence number %d (want %d)\n",
1081 HDR_GET_SEQ (hdr
), mips_receive_seq
);
1085 if (mips_cksum (hdr
, buff
, len
) == TRLR_GET_CKSUM (trlr
))
1088 if (remote_debug
> 0)
1089 /* Don't use _filtered; we can't deal with a QUIT out of
1090 target_wait, and I think this might be called from there. */
1091 printf_unfiltered ("Bad checksum; data %d, trailer %d\n",
1092 mips_cksum (hdr
, buff
, len
),
1093 TRLR_GET_CKSUM (trlr
));
1095 /* The checksum failed. Send an acknowledgement for the
1096 previous packet to tell the remote to resend the packet. */
1097 ack
[HDR_INDX_SYN
] = HDR_SET_SYN (0, 0, mips_receive_seq
);
1098 ack
[HDR_INDX_TYPE_LEN
] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq
);
1099 ack
[HDR_INDX_LEN1
] = HDR_SET_LEN1 (0, 0, mips_receive_seq
);
1100 ack
[HDR_INDX_SEQ
] = HDR_SET_SEQ (0, 0, mips_receive_seq
);
1102 cksum
= mips_cksum (ack
, (unsigned char *) NULL
, 0);
1104 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM1
] = TRLR_SET_CSUM1 (cksum
);
1105 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM2
] = TRLR_SET_CSUM2 (cksum
);
1106 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM3
] = TRLR_SET_CSUM3 (cksum
);
1108 if (remote_debug
> 0)
1110 ack
[HDR_LENGTH
+ TRLR_LENGTH
] = '\0';
1111 /* Don't use _filtered; we can't deal with a QUIT out of
1112 target_wait, and I think this might be called from there. */
1113 printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq
,
1117 if (serial_write (mips_desc
, ack
, HDR_LENGTH
+ TRLR_LENGTH
) != 0)
1120 mips_error ("write to target failed: %s", safe_strerror (errno
));
1126 if (remote_debug
> 0)
1129 /* Don't use _filtered; we can't deal with a QUIT out of
1130 target_wait, and I think this might be called from there. */
1131 printf_unfiltered ("Got packet \"%s\"\n", buff
);
1134 /* We got the packet. Send an acknowledgement. */
1135 mips_receive_seq
= (mips_receive_seq
+ 1) % SEQ_MODULOS
;
1137 ack
[HDR_INDX_SYN
] = HDR_SET_SYN (0, 0, mips_receive_seq
);
1138 ack
[HDR_INDX_TYPE_LEN
] = HDR_SET_TYPE_LEN (0, 0, mips_receive_seq
);
1139 ack
[HDR_INDX_LEN1
] = HDR_SET_LEN1 (0, 0, mips_receive_seq
);
1140 ack
[HDR_INDX_SEQ
] = HDR_SET_SEQ (0, 0, mips_receive_seq
);
1142 cksum
= mips_cksum (ack
, (unsigned char *) NULL
, 0);
1144 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM1
] = TRLR_SET_CSUM1 (cksum
);
1145 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM2
] = TRLR_SET_CSUM2 (cksum
);
1146 ack
[HDR_LENGTH
+ TRLR_INDX_CSUM3
] = TRLR_SET_CSUM3 (cksum
);
1148 if (remote_debug
> 0)
1150 ack
[HDR_LENGTH
+ TRLR_LENGTH
] = '\0';
1151 /* Don't use _filtered; we can't deal with a QUIT out of
1152 target_wait, and I think this might be called from there. */
1153 printf_unfiltered ("Writing ack %d \"%s\"\n", mips_receive_seq
,
1157 if (serial_write (mips_desc
, ack
, HDR_LENGTH
+ TRLR_LENGTH
) != 0)
1160 mips_error ("write to target failed: %s", safe_strerror (errno
));
1168 /* Optionally send a request to the remote system and optionally wait
1169 for the reply. This implements the remote debugging protocol,
1170 which is built on top of the packet protocol defined above. Each
1171 request has an ADDR argument and a DATA argument. The following
1172 requests are defined:
1174 \0 don't send a request; just wait for a reply
1175 i read word from instruction space at ADDR
1176 d read word from data space at ADDR
1177 I write DATA to instruction space at ADDR
1178 D write DATA to data space at ADDR
1179 r read register number ADDR
1180 R set register number ADDR to value DATA
1181 c continue execution (if ADDR != 1, set pc to ADDR)
1182 s single step (if ADDR != 1, set pc to ADDR)
1184 The read requests return the value requested. The write requests
1185 return the previous value in the changed location. The execution
1186 requests return a UNIX wait value (the approximate signal which
1187 caused execution to stop is in the upper eight bits).
1189 If PERR is not NULL, this function waits for a reply. If an error
1190 occurs, it sets *PERR to 1 and sets errno according to what the
1191 target board reports. */
1194 mips_request (int cmd
,
1201 char myBuff
[DATA_MAXLEN
+ 1];
1206 unsigned long rresponse
;
1208 if (buff
== (char *) NULL
)
1213 if (mips_need_reply
)
1214 internal_error (__FILE__
, __LINE__
,
1215 _("mips_request: Trying to send command before reply"));
1216 sprintf (buff
, "0x0 %c 0x%s 0x%s", cmd
, paddr_nz (addr
), paddr_nz (data
));
1217 mips_send_packet (buff
, 1);
1218 mips_need_reply
= 1;
1221 if (perr
== (int *) NULL
)
1224 if (!mips_need_reply
)
1225 internal_error (__FILE__
, __LINE__
,
1226 _("mips_request: Trying to get reply before command"));
1228 mips_need_reply
= 0;
1230 len
= mips_receive_packet (buff
, 1, timeout
);
1233 if (sscanf (buff
, "0x%x %c 0x%x 0x%lx",
1234 &rpid
, &rcmd
, &rerrflg
, &rresponse
) != 4
1235 || (cmd
!= '\0' && rcmd
!= cmd
))
1236 mips_error ("Bad response from remote board");
1242 /* FIXME: This will returns MIPS errno numbers, which may or may
1243 not be the same as errno values used on other systems. If
1244 they stick to common errno values, they will be the same, but
1245 if they don't, they must be translated. */
1256 mips_initialize_cleanups (void *arg
)
1258 mips_initializing
= 0;
1262 mips_exit_cleanups (void *arg
)
1268 mips_send_command (const char *cmd
, int prompt
)
1270 serial_write (mips_desc
, cmd
, strlen (cmd
));
1274 mips_expect (mips_monitor_prompt
);
1277 /* Enter remote (dbx) debug mode: */
1279 mips_enter_debug (void)
1281 /* Reset the sequence numbers, ready for the new debug sequence: */
1283 mips_receive_seq
= 0;
1285 if (mips_monitor
!= MON_IDT
)
1286 mips_send_command ("debug\r", 0);
1287 else /* assume IDT monitor by default */
1288 mips_send_command ("db tty0\r", 0);
1291 serial_write (mips_desc
, "\r", sizeof "\r" - 1);
1293 /* We don't need to absorb any spurious characters here, since the
1294 mips_receive_header will eat up a reasonable number of characters
1295 whilst looking for the SYN, however this avoids the "garbage"
1296 being displayed to the user. */
1297 if (mips_monitor
!= MON_IDT
)
1301 char buff
[DATA_MAXLEN
+ 1];
1302 if (mips_receive_packet (buff
, 1, 3) < 0)
1303 mips_error ("Failed to initialize (didn't receive packet).");
1307 /* Exit remote (dbx) debug mode, returning to the monitor prompt: */
1309 mips_exit_debug (void)
1312 struct cleanup
*old_cleanups
= make_cleanup (mips_exit_cleanups
, NULL
);
1316 if (mips_monitor
!= MON_IDT
)
1318 /* The DDB (NEC) and MiniRISC (LSI) versions of PMON exit immediately,
1319 so we do not get a reply to this command: */
1320 mips_request ('x', 0, 0, NULL
, mips_receive_wait
, NULL
);
1321 mips_need_reply
= 0;
1322 if (!mips_expect (" break!"))
1326 mips_request ('x', 0, 0, &err
, mips_receive_wait
, NULL
);
1328 if (!mips_expect (mips_monitor_prompt
))
1331 do_cleanups (old_cleanups
);
1336 /* Initialize a new connection to the MIPS board, and make sure we are
1337 really connected. */
1340 mips_initialize (void)
1343 struct cleanup
*old_cleanups
= make_cleanup (mips_initialize_cleanups
, NULL
);
1346 /* What is this code doing here? I don't see any way it can happen, and
1347 it might mean mips_initializing didn't get cleared properly.
1348 So I'll make it a warning. */
1350 if (mips_initializing
)
1352 warning ("internal error: mips_initialize called twice");
1357 mips_initializing
= 1;
1359 /* At this point, the packit protocol isn't responding. We'll try getting
1360 into the monitor, and restarting the protocol. */
1362 /* Force the system into the monitor. After this we *should* be at
1363 the mips_monitor_prompt. */
1364 if (mips_monitor
!= MON_IDT
)
1365 j
= 0; /* start by checking if we are already at the prompt */
1367 j
= 1; /* start by sending a break */
1372 case 0: /* First, try sending a CR */
1373 serial_flush_input (mips_desc
);
1374 serial_write (mips_desc
, "\r", 1);
1376 case 1: /* First, try sending a break */
1377 serial_send_break (mips_desc
);
1379 case 2: /* Then, try a ^C */
1380 serial_write (mips_desc
, "\003", 1);
1382 case 3: /* Then, try escaping from download */
1384 if (mips_monitor
!= MON_IDT
)
1388 /* We shouldn't need to send multiple termination
1389 sequences, since the target performs line (or
1390 block) reads, and then processes those
1391 packets. In-case we were downloading a large packet
1392 we flush the output buffer before inserting a
1393 termination sequence. */
1394 serial_flush_output (mips_desc
);
1395 sprintf (tbuff
, "\r/E/E\r");
1396 serial_write (mips_desc
, tbuff
, 6);
1403 /* We are possibly in binary download mode, having
1404 aborted in the middle of an S-record. ^C won't
1405 work because of binary mode. The only reliable way
1406 out is to send enough termination packets (8 bytes)
1407 to fill up and then overflow the largest size
1408 S-record (255 bytes in this case). This amounts to
1412 mips_make_srec (srec
, '7', 0, NULL
, 0);
1414 for (i
= 1; i
<= 33; i
++)
1416 serial_write (mips_desc
, srec
, 8);
1418 if (serial_readchar (mips_desc
, 0) >= 0)
1419 break; /* Break immediatly if we get something from
1426 mips_error ("Failed to initialize.");
1429 if (mips_expect (mips_monitor_prompt
))
1433 if (mips_monitor
!= MON_IDT
)
1435 /* Sometimes PMON ignores the first few characters in the first
1436 command sent after a load. Sending a blank command gets
1438 mips_send_command ("\r", -1);
1440 /* Ensure the correct target state: */
1441 if (mips_monitor
!= MON_LSI
)
1442 mips_send_command ("set regsize 64\r", -1);
1443 mips_send_command ("set hostport tty0\r", -1);
1444 mips_send_command ("set brkcmd \"\"\r", -1);
1445 /* Delete all the current breakpoints: */
1446 mips_send_command ("db *\r", -1);
1447 /* NOTE: PMON does not have breakpoint support through the
1448 "debug" mode, only at the monitor command-line. */
1451 mips_enter_debug ();
1453 /* Clear all breakpoints: */
1454 if ((mips_monitor
== MON_IDT
1455 && clear_breakpoint (-1, 0, BREAK_UNUSED
) == 0)
1456 || mips_monitor
== MON_LSI
)
1457 monitor_supports_breakpoints
= 1;
1459 monitor_supports_breakpoints
= 0;
1461 do_cleanups (old_cleanups
);
1463 /* If this doesn't call error, we have connected; we don't care if
1464 the request itself succeeds or fails. */
1466 mips_request ('r', 0, 0, &err
, mips_receive_wait
, NULL
);
1469 /* Open a connection to the remote board. */
1471 common_open (struct target_ops
*ops
, char *name
, int from_tty
,
1472 enum mips_monitor_type new_monitor
,
1473 const char *new_monitor_prompt
)
1476 char *serial_port_name
;
1477 char *remote_name
= 0;
1478 char *local_name
= 0;
1483 "To open a MIPS remote debugging connection, you need to specify what serial\n\
1484 device is attached to the target board (e.g., /dev/ttya).\n"
1485 "If you want to use TFTP to download to the board, specify the name of a\n"
1486 "temporary file to be used by GDB for downloads as the second argument.\n"
1487 "This filename must be in the form host:filename, where host is the name\n"
1488 "of the host running the TFTP server, and the file must be readable by the\n"
1489 "world. If the local name of the temporary file differs from the name as\n"
1490 "seen from the board via TFTP, specify that name as the third parameter.\n");
1492 /* Parse the serial port name, the optional TFTP name, and the
1493 optional local TFTP name. */
1494 if ((argv
= buildargv (name
)) == NULL
)
1496 make_cleanup_freeargv (argv
);
1498 serial_port_name
= xstrdup (argv
[0]);
1499 if (argv
[1]) /* remote TFTP name specified? */
1501 remote_name
= argv
[1];
1502 if (argv
[2]) /* local TFTP filename specified? */
1503 local_name
= argv
[2];
1506 target_preopen (from_tty
);
1509 unpush_target (current_ops
);
1511 /* Open and initialize the serial port. */
1512 mips_desc
= serial_open (serial_port_name
);
1513 if (mips_desc
== NULL
)
1514 perror_with_name (serial_port_name
);
1516 if (baud_rate
!= -1)
1518 if (serial_setbaudrate (mips_desc
, baud_rate
))
1520 serial_close (mips_desc
);
1521 perror_with_name (serial_port_name
);
1525 serial_raw (mips_desc
);
1527 /* Open and initialize the optional download port. If it is in the form
1528 hostname#portnumber, it's a UDP socket. If it is in the form
1529 hostname:filename, assume it's the TFTP filename that must be
1530 passed to the DDB board to tell it where to get the load file. */
1533 if (strchr (remote_name
, '#'))
1535 udp_desc
= serial_open (remote_name
);
1537 perror_with_name ("Unable to open UDP port");
1542 /* Save the remote and local names of the TFTP temp file. If
1543 the user didn't specify a local name, assume it's the same
1544 as the part of the remote name after the "host:". */
1548 xfree (tftp_localname
);
1549 if (local_name
== NULL
)
1550 if ((local_name
= strchr (remote_name
, ':')) != NULL
)
1551 local_name
++; /* skip over the colon */
1552 if (local_name
== NULL
)
1553 local_name
= remote_name
; /* local name same as remote name */
1554 tftp_name
= xstrdup (remote_name
);
1555 tftp_localname
= xstrdup (local_name
);
1563 /* Reset the expected monitor prompt if it's never been set before. */
1564 if (mips_monitor_prompt
== NULL
)
1565 mips_monitor_prompt
= xstrdup (new_monitor_prompt
);
1566 mips_monitor
= new_monitor
;
1571 printf_unfiltered ("Remote MIPS debugging using %s\n", serial_port_name
);
1573 /* Switch to using remote target now. */
1576 /* FIXME: Should we call start_remote here? */
1578 /* Try to figure out the processor model if possible. */
1579 deprecated_mips_set_processor_regs_hack ();
1581 /* This is really the job of start_remote however, that makes an
1582 assumption that the target is about to print out a status message
1583 of some sort. That doesn't happen here (in fact, it may not be
1584 possible to get the monitor to send the appropriate packet). */
1586 reinit_frame_cache ();
1587 registers_changed ();
1588 stop_pc
= read_pc ();
1589 print_stack_frame (get_selected_frame (NULL
), 0, SRC_AND_LOC
);
1590 xfree (serial_port_name
);
1594 mips_open (char *name
, int from_tty
)
1596 const char *monitor_prompt
= NULL
;
1597 if (gdbarch_bfd_arch_info (current_gdbarch
) != NULL
1598 && gdbarch_bfd_arch_info (current_gdbarch
)->arch
== bfd_arch_mips
)
1600 switch (gdbarch_bfd_arch_info (current_gdbarch
)->mach
)
1602 case bfd_mach_mips4100
:
1603 case bfd_mach_mips4300
:
1604 case bfd_mach_mips4600
:
1605 case bfd_mach_mips4650
:
1606 case bfd_mach_mips5000
:
1607 monitor_prompt
= "<RISQ> ";
1611 if (monitor_prompt
== NULL
)
1612 monitor_prompt
= "<IDT>";
1613 common_open (&mips_ops
, name
, from_tty
, MON_IDT
, monitor_prompt
);
1617 pmon_open (char *name
, int from_tty
)
1619 common_open (&pmon_ops
, name
, from_tty
, MON_PMON
, "PMON> ");
1623 ddb_open (char *name
, int from_tty
)
1625 common_open (&ddb_ops
, name
, from_tty
, MON_DDB
, "NEC010>");
1629 lsi_open (char *name
, int from_tty
)
1633 /* Clear the LSI breakpoint table. */
1634 for (i
= 0; i
< MAX_LSI_BREAKPOINTS
; i
++)
1635 lsi_breakpoints
[i
].type
= BREAK_UNUSED
;
1637 common_open (&lsi_ops
, name
, from_tty
, MON_LSI
, "PMON> ");
1640 /* Close a connection to the remote board. */
1643 mips_close (int quitting
)
1647 /* Get the board out of remote debugging mode. */
1648 (void) mips_exit_debug ();
1654 /* Detach from the remote board. */
1657 mips_detach (char *args
, int from_tty
)
1660 error ("Argument given to \"detach\" when remotely debugging.");
1667 printf_unfiltered ("Ending remote MIPS debugging.\n");
1670 /* Tell the target board to resume. This does not wait for a reply
1671 from the board, except in the case of single-stepping on LSI boards,
1672 where PMON does return a reply. */
1675 mips_resume (ptid_t ptid
, int step
, enum target_signal siggnal
)
1679 /* LSI PMON requires returns a reply packet "0x1 s 0x0 0x57f" after
1680 a single step, so we wait for that. */
1681 mips_request (step
? 's' : 'c', 1, siggnal
,
1682 mips_monitor
== MON_LSI
&& step
? &err
: (int *) NULL
,
1683 mips_receive_wait
, NULL
);
1686 /* Return the signal corresponding to SIG, where SIG is the number which
1687 the MIPS protocol uses for the signal. */
1688 static enum target_signal
1689 mips_signal_from_protocol (int sig
)
1691 /* We allow a few more signals than the IDT board actually returns, on
1692 the theory that there is at least *some* hope that perhaps the numbering
1693 for these signals is widely agreed upon. */
1696 return TARGET_SIGNAL_UNKNOWN
;
1698 /* Don't want to use target_signal_from_host because we are converting
1699 from MIPS signal numbers, not host ones. Our internal numbers
1700 match the MIPS numbers for the signals the board can return, which
1701 are: SIGINT, SIGSEGV, SIGBUS, SIGILL, SIGFPE, SIGTRAP. */
1702 return (enum target_signal
) sig
;
1705 /* Wait until the remote stops, and return a wait status. */
1708 mips_wait (ptid_t ptid
, struct target_waitstatus
*status
)
1712 char buff
[DATA_MAXLEN
];
1718 interrupt_count
= 0;
1721 /* If we have not sent a single step or continue command, then the
1722 board is waiting for us to do something. Return a status
1723 indicating that it is stopped. */
1724 if (!mips_need_reply
)
1726 status
->kind
= TARGET_WAITKIND_STOPPED
;
1727 status
->value
.sig
= TARGET_SIGNAL_TRAP
;
1728 return inferior_ptid
;
1731 /* No timeout; we sit here as long as the program continues to execute. */
1733 rstatus
= mips_request ('\000', 0, 0, &err
, -1, buff
);
1736 mips_error ("Remote failure: %s", safe_strerror (errno
));
1738 /* On returning from a continue, the PMON monitor seems to start
1739 echoing back the messages we send prior to sending back the
1740 ACK. The code can cope with this, but to try and avoid the
1741 unnecessary serial traffic, and "spurious" characters displayed
1742 to the user, we cheat and reset the debug protocol. The problems
1743 seems to be caused by a check on the number of arguments, and the
1744 command length, within the monitor causing it to echo the command
1746 if (mips_monitor
== MON_PMON
)
1749 mips_enter_debug ();
1752 /* See if we got back extended status. If so, pick out the pc, fp, sp, etc... */
1754 nfields
= sscanf (buff
, "0x%*x %*c 0x%*x 0x%*x 0x%x 0x%x 0x%x 0x%*x %s",
1755 &rpc
, &rfp
, &rsp
, flags
);
1758 struct regcache
*regcache
= get_current_regcache ();
1759 char buf
[MAX_REGISTER_SIZE
];
1761 store_unsigned_integer (buf
,
1763 (current_gdbarch
, gdbarch_pc_regnum
1764 (current_gdbarch
)), rpc
);
1765 regcache_raw_supply (regcache
, gdbarch_pc_regnum (current_gdbarch
), buf
);
1767 store_unsigned_integer
1768 (buf
, register_size (current_gdbarch
,
1769 gdbarch_pc_regnum (current_gdbarch
)), rfp
);
1770 regcache_raw_supply (regcache
, 30, buf
); /* This register they are avoiding and so it is unnamed */
1772 store_unsigned_integer (buf
, register_size (current_gdbarch
,
1773 gdbarch_sp_regnum (current_gdbarch
)), rsp
);
1774 regcache_raw_supply (regcache
, gdbarch_sp_regnum (current_gdbarch
), buf
);
1776 store_unsigned_integer (buf
,
1777 register_size (current_gdbarch
,
1778 gdbarch_deprecated_fp_regnum
1781 regcache_raw_supply (regcache
,
1782 gdbarch_deprecated_fp_regnum (current_gdbarch
), buf
);
1788 for (i
= 0; i
<= 2; i
++)
1789 if (flags
[i
] == 'r' || flags
[i
] == 'w')
1791 else if (flags
[i
] == '\000')
1796 if (strcmp (target_shortname
, "lsi") == 0)
1799 /* If this is an LSI PMON target, see if we just hit a hardrdware watchpoint.
1800 Right now, PMON doesn't give us enough information to determine which
1801 breakpoint we hit. So we have to look up the PC in our own table
1802 of breakpoints, and if found, assume it's just a normal instruction
1803 fetch breakpoint, not a data watchpoint. FIXME when PMON
1804 provides some way to tell us what type of breakpoint it is. */
1806 CORE_ADDR pc
= read_pc ();
1809 for (i
= 0; i
< MAX_LSI_BREAKPOINTS
; i
++)
1811 if (lsi_breakpoints
[i
].addr
== pc
1812 && lsi_breakpoints
[i
].type
== BREAK_FETCH
)
1819 /* If a data breakpoint was hit, PMON returns the following packet:
1821 The return packet from an ordinary breakpoint doesn't have the
1822 extra 0x01 field tacked onto the end. */
1823 if (nfields
== 1 && rpc
== 1)
1828 /* NOTE: The following (sig) numbers are defined by PMON:
1829 SPP_SIGTRAP 5 breakpoint
1837 /* Translate a MIPS waitstatus. We use constants here rather than WTERMSIG
1838 and so on, because the constants we want here are determined by the
1839 MIPS protocol and have nothing to do with what host we are running on. */
1840 if ((rstatus
& 0xff) == 0)
1842 status
->kind
= TARGET_WAITKIND_EXITED
;
1843 status
->value
.integer
= (((rstatus
) >> 8) & 0xff);
1845 else if ((rstatus
& 0xff) == 0x7f)
1847 status
->kind
= TARGET_WAITKIND_STOPPED
;
1848 status
->value
.sig
= mips_signal_from_protocol (((rstatus
) >> 8) & 0xff);
1850 /* If the stop PC is in the _exit function, assume
1851 we hit the 'break 0x3ff' instruction in _exit, so this
1852 is not a normal breakpoint. */
1853 if (strcmp (target_shortname
, "lsi") == 0)
1856 CORE_ADDR func_start
;
1857 CORE_ADDR pc
= read_pc ();
1859 find_pc_partial_function (pc
, &func_name
, &func_start
, NULL
);
1860 if (func_name
!= NULL
&& strcmp (func_name
, "_exit") == 0
1861 && func_start
== pc
)
1862 status
->kind
= TARGET_WAITKIND_EXITED
;
1867 status
->kind
= TARGET_WAITKIND_SIGNALLED
;
1868 status
->value
.sig
= mips_signal_from_protocol (rstatus
& 0x7f);
1871 return inferior_ptid
;
1874 /* We have to map between the register numbers used by gdb and the
1875 register numbers used by the debugging protocol. */
1877 #define REGNO_OFFSET 96
1880 mips_map_regno (int regno
)
1884 if (regno
>= mips_regnum (current_gdbarch
)->fp0
1885 && regno
< mips_regnum (current_gdbarch
)->fp0
+ 32)
1886 return regno
- mips_regnum (current_gdbarch
)->fp0
+ 32;
1887 else if (regno
== mips_regnum (current_gdbarch
)->pc
)
1888 return REGNO_OFFSET
+ 0;
1889 else if (regno
== mips_regnum (current_gdbarch
)->cause
)
1890 return REGNO_OFFSET
+ 1;
1891 else if (regno
== mips_regnum (current_gdbarch
)->hi
)
1892 return REGNO_OFFSET
+ 2;
1893 else if (regno
== mips_regnum (current_gdbarch
)->lo
)
1894 return REGNO_OFFSET
+ 3;
1895 else if (regno
== mips_regnum (current_gdbarch
)->fp_control_status
)
1896 return REGNO_OFFSET
+ 4;
1897 else if (regno
== mips_regnum (current_gdbarch
)->fp_implementation_revision
)
1898 return REGNO_OFFSET
+ 5;
1900 /* FIXME: Is there a way to get the status register? */
1904 /* Fetch the remote registers. */
1907 mips_fetch_registers (struct regcache
*regcache
, int regno
)
1909 unsigned LONGEST val
;
1914 for (regno
= 0; regno
< gdbarch_num_regs (current_gdbarch
); regno
++)
1915 mips_fetch_registers (regcache
, regno
);
1919 if (regno
== gdbarch_deprecated_fp_regnum (current_gdbarch
)
1920 || regno
== MIPS_ZERO_REGNUM
)
1921 /* gdbarch_deprecated_fp_regnum on the mips is a hack which is just
1922 supposed to read zero (see also mips-nat.c). */
1926 /* If PMON doesn't support this register, don't waste serial
1927 bandwidth trying to read it. */
1928 int pmon_reg
= mips_map_regno (regno
);
1929 if (regno
!= 0 && pmon_reg
== 0)
1933 /* Unfortunately the PMON version in the Vr4300 board has been
1934 compiled without the 64bit register access commands. This
1935 means we cannot get hold of the full register width. */
1936 if (mips_monitor
== MON_DDB
)
1937 val
= (unsigned) mips_request ('t', pmon_reg
, 0,
1938 &err
, mips_receive_wait
, NULL
);
1940 val
= mips_request ('r', pmon_reg
, 0,
1941 &err
, mips_receive_wait
, NULL
);
1943 mips_error ("Can't read register %d: %s", regno
,
1944 safe_strerror (errno
));
1949 char buf
[MAX_REGISTER_SIZE
];
1951 /* We got the number the register holds, but gdb expects to see a
1952 value in the target byte ordering. */
1953 store_unsigned_integer (buf
, register_size (current_gdbarch
, regno
), val
);
1954 regcache_raw_supply (regcache
, regno
, buf
);
1958 /* Prepare to store registers. The MIPS protocol can store individual
1959 registers, so this function doesn't have to do anything. */
1962 mips_prepare_to_store (struct regcache
*regcache
)
1966 /* Store remote register(s). */
1969 mips_store_registers (struct regcache
*regcache
, int regno
)
1976 for (regno
= 0; regno
< gdbarch_num_regs (current_gdbarch
); regno
++)
1977 mips_store_registers (regcache
, regno
);
1981 regcache_cooked_read_unsigned (regcache
, regno
, &val
);
1982 mips_request ('R', mips_map_regno (regno
), val
,
1983 &err
, mips_receive_wait
, NULL
);
1985 mips_error ("Can't write register %d: %s", regno
, safe_strerror (errno
));
1988 /* Fetch a word from the target board. */
1991 mips_fetch_word (CORE_ADDR addr
)
1996 val
= mips_request ('d', addr
, 0, &err
, mips_receive_wait
, NULL
);
1999 /* Data space failed; try instruction space. */
2000 val
= mips_request ('i', addr
, 0, &err
,
2001 mips_receive_wait
, NULL
);
2003 mips_error ("Can't read address 0x%s: %s",
2004 paddr_nz (addr
), safe_strerror (errno
));
2009 /* Store a word to the target board. Returns errno code or zero for
2010 success. If OLD_CONTENTS is non-NULL, put the old contents of that
2011 memory location there. */
2013 /* FIXME! make sure only 32-bit quantities get stored! */
2015 mips_store_word (CORE_ADDR addr
, unsigned int val
, char *old_contents
)
2018 unsigned int oldcontents
;
2020 oldcontents
= mips_request ('D', addr
, val
, &err
,
2021 mips_receive_wait
, NULL
);
2024 /* Data space failed; try instruction space. */
2025 oldcontents
= mips_request ('I', addr
, val
, &err
,
2026 mips_receive_wait
, NULL
);
2030 if (old_contents
!= NULL
)
2031 store_unsigned_integer (old_contents
, 4, oldcontents
);
2035 /* Read or write LEN bytes from inferior memory at MEMADDR,
2036 transferring to or from debugger address MYADDR. Write to inferior
2037 if SHOULD_WRITE is nonzero. Returns length of data written or
2038 read; 0 for error. Note that protocol gives us the correct value
2039 for a longword, since it transfers values in ASCII. We want the
2040 byte values, so we have to swap the longword values. */
2042 static int mask_address_p
= 1;
2045 mips_xfer_memory (CORE_ADDR memaddr
, gdb_byte
*myaddr
, int len
, int write
,
2046 struct mem_attrib
*attrib
, struct target_ops
*target
)
2054 /* PMON targets do not cope well with 64 bit addresses. Mask the
2055 value down to 32 bits. */
2057 memaddr
&= (CORE_ADDR
) 0xffffffff;
2059 /* Round starting address down to longword boundary. */
2060 addr
= memaddr
& ~3;
2061 /* Round ending address up; get number of longwords that makes. */
2062 count
= (((memaddr
+ len
) - addr
) + 3) / 4;
2063 /* Allocate buffer of that many longwords. */
2064 buffer
= alloca (count
* 4);
2068 /* Fill start and end extra bytes of buffer with existing data. */
2069 if (addr
!= memaddr
|| len
< 4)
2071 /* Need part of initial word -- fetch it. */
2072 store_unsigned_integer (&buffer
[0], 4, mips_fetch_word (addr
));
2077 /* Need part of last word -- fetch it. FIXME: we do this even
2078 if we don't need it. */
2079 store_unsigned_integer (&buffer
[(count
- 1) * 4], 4,
2080 mips_fetch_word (addr
+ (count
- 1) * 4));
2083 /* Copy data to be written over corresponding part of buffer */
2085 memcpy ((char *) buffer
+ (memaddr
& 3), myaddr
, len
);
2087 /* Write the entire buffer. */
2089 for (i
= 0; i
< count
; i
++, addr
+= 4)
2091 status
= mips_store_word (addr
,
2092 extract_unsigned_integer (&buffer
[i
* 4], 4),
2094 /* Report each kilobyte (we download 32-bit words at a time) */
2097 printf_unfiltered ("*");
2098 gdb_flush (gdb_stdout
);
2105 /* FIXME: Do we want a QUIT here? */
2108 printf_unfiltered ("\n");
2112 /* Read all the longwords */
2113 for (i
= 0; i
< count
; i
++, addr
+= 4)
2115 store_unsigned_integer (&buffer
[i
* 4], 4, mips_fetch_word (addr
));
2119 /* Copy appropriate bytes out of the buffer. */
2120 memcpy (myaddr
, buffer
+ (memaddr
& 3), len
);
2125 /* Print info on this target. */
2128 mips_files_info (struct target_ops
*ignore
)
2130 printf_unfiltered ("Debugging a MIPS board over a serial line.\n");
2133 /* Kill the process running on the board. This will actually only
2134 work if we are doing remote debugging over the console input. I
2135 think that if IDT/sim had the remote debug interrupt enabled on the
2136 right port, we could interrupt the process with a break signal. */
2141 if (!mips_wait_flag
)
2146 if (interrupt_count
>= 2)
2148 interrupt_count
= 0;
2150 target_terminal_ours ();
2152 if (query ("Interrupted while waiting for the program.\n\
2153 Give up (and stop debugging it)? "))
2155 /* Clean up in such a way that mips_close won't try to talk to the
2156 board (it almost surely won't work since we weren't able to talk to
2161 printf_unfiltered ("Ending remote MIPS debugging.\n");
2162 target_mourn_inferior ();
2164 deprecated_throw_reason (RETURN_QUIT
);
2167 target_terminal_inferior ();
2170 if (remote_debug
> 0)
2171 printf_unfiltered ("Sending break\n");
2173 serial_send_break (mips_desc
);
2182 serial_write (mips_desc
, &cc
, 1);
2184 target_mourn_inferior ();
2189 /* Start running on the target board. */
2192 mips_create_inferior (char *execfile
, char *args
, char **env
, int from_tty
)
2199 Can't pass arguments to remote MIPS board; arguments ignored.");
2200 /* And don't try to use them on the next "run" command. */
2201 execute_command ("set args", 0);
2204 if (execfile
== 0 || exec_bfd
== 0)
2205 error ("No executable file specified");
2207 entry_pt
= (CORE_ADDR
) bfd_get_start_address (exec_bfd
);
2209 init_wait_for_inferior ();
2211 /* FIXME: Should we set inferior_ptid here? */
2213 write_pc (entry_pt
);
2216 /* Clean up after a process. Actually nothing to do. */
2219 mips_mourn_inferior (void)
2221 if (current_ops
!= NULL
)
2222 unpush_target (current_ops
);
2223 generic_mourn_inferior ();
2226 /* We can write a breakpoint and read the shadow contents in one
2229 /* Insert a breakpoint. On targets that don't have built-in
2230 breakpoint support, we read the contents of the target location and
2231 stash it, then overwrite it with a breakpoint instruction. ADDR is
2232 the target location in the target machine. BPT is the breakpoint
2233 being inserted or removed, which contains memory for saving the
2237 mips_insert_breakpoint (struct bp_target_info
*bp_tgt
)
2239 if (monitor_supports_breakpoints
)
2240 return set_breakpoint (bp_tgt
->placed_address
, MIPS_INSN32_SIZE
,
2243 return memory_insert_breakpoint (bp_tgt
);
2247 mips_remove_breakpoint (struct bp_target_info
*bp_tgt
)
2249 if (monitor_supports_breakpoints
)
2250 return clear_breakpoint (bp_tgt
->placed_address
, MIPS_INSN32_SIZE
,
2253 return memory_remove_breakpoint (bp_tgt
);
2256 /* Tell whether this target can support a hardware breakpoint. CNT
2257 is the number of hardware breakpoints already installed. This
2258 implements the TARGET_CAN_USE_HARDWARE_WATCHPOINT macro. */
2261 mips_can_use_watchpoint (int type
, int cnt
, int othertype
)
2263 return cnt
< MAX_LSI_BREAKPOINTS
&& strcmp (target_shortname
, "lsi") == 0;
2267 /* Compute a don't care mask for the region bounding ADDR and ADDR + LEN - 1.
2268 This is used for memory ref breakpoints. */
2270 static unsigned long
2271 calculate_mask (CORE_ADDR addr
, int len
)
2276 mask
= addr
^ (addr
+ len
- 1);
2278 for (i
= 32; i
>= 0; i
--)
2284 mask
= (unsigned long) 0xffffffff >> i
;
2290 /* Set a data watchpoint. ADDR and LEN should be obvious. TYPE is 0
2291 for a write watchpoint, 1 for a read watchpoint, or 2 for a read/write
2295 mips_insert_watchpoint (CORE_ADDR addr
, int len
, int type
)
2297 if (set_breakpoint (addr
, len
, type
))
2304 mips_remove_watchpoint (CORE_ADDR addr
, int len
, int type
)
2306 if (clear_breakpoint (addr
, len
, type
))
2313 mips_stopped_by_watchpoint (void)
2315 return hit_watchpoint
;
2319 /* Insert a breakpoint. */
2322 set_breakpoint (CORE_ADDR addr
, int len
, enum break_type type
)
2324 return common_breakpoint (1, addr
, len
, type
);
2328 /* Clear a breakpoint. */
2331 clear_breakpoint (CORE_ADDR addr
, int len
, enum break_type type
)
2333 return common_breakpoint (0, addr
, len
, type
);
2337 /* Check the error code from the return packet for an LSI breakpoint
2338 command. If there's no error, just return 0. If it's a warning,
2339 print the warning text and return 0. If it's an error, print
2340 the error text and return 1. <ADDR> is the address of the breakpoint
2341 that was being set. <RERRFLG> is the error code returned by PMON.
2342 This is a helper function for common_breakpoint. */
2345 check_lsi_error (CORE_ADDR addr
, int rerrflg
)
2347 struct lsi_error
*err
;
2348 char *saddr
= paddr_nz (addr
); /* printable address string */
2350 if (rerrflg
== 0) /* no error */
2353 /* Warnings can be ORed together, so check them all. */
2354 if (rerrflg
& W_WARN
)
2356 if (monitor_warnings
)
2359 for (err
= lsi_warning_table
; err
->code
!= 0; err
++)
2361 if ((err
->code
& rerrflg
) == err
->code
)
2364 fprintf_unfiltered (gdb_stderr
,
2365 "common_breakpoint (0x%s): Warning: %s\n",
2371 fprintf_unfiltered (gdb_stderr
,
2372 "common_breakpoint (0x%s): Unknown warning: 0x%x\n",
2379 /* Errors are unique, i.e. can't be ORed together. */
2380 for (err
= lsi_error_table
; err
->code
!= 0; err
++)
2382 if ((err
->code
& rerrflg
) == err
->code
)
2384 fprintf_unfiltered (gdb_stderr
,
2385 "common_breakpoint (0x%s): Error: %s\n",
2391 fprintf_unfiltered (gdb_stderr
,
2392 "common_breakpoint (0x%s): Unknown error: 0x%x\n",
2399 /* This routine sends a breakpoint command to the remote target.
2401 <SET> is 1 if setting a breakpoint, or 0 if clearing a breakpoint.
2402 <ADDR> is the address of the breakpoint.
2403 <LEN> the length of the region to break on.
2404 <TYPE> is the type of breakpoint:
2405 0 = write (BREAK_WRITE)
2406 1 = read (BREAK_READ)
2407 2 = read/write (BREAK_ACCESS)
2408 3 = instruction fetch (BREAK_FETCH)
2410 Return 0 if successful; otherwise 1. */
2413 common_breakpoint (int set
, CORE_ADDR addr
, int len
, enum break_type type
)
2415 char buf
[DATA_MAXLEN
+ 1];
2417 int rpid
, rerrflg
, rresponse
, rlen
;
2420 addr
= gdbarch_addr_bits_remove (current_gdbarch
, addr
);
2422 if (mips_monitor
== MON_LSI
)
2424 if (set
== 0) /* clear breakpoint */
2426 /* The LSI PMON "clear breakpoint" has this form:
2427 <pid> 'b' <bptn> 0x0
2429 <pid> 'b' 0x0 <code>
2431 <bptn> is a breakpoint number returned by an earlier 'B' command.
2432 Possible return codes: OK, E_BPT. */
2436 /* Search for the breakpoint in the table. */
2437 for (i
= 0; i
< MAX_LSI_BREAKPOINTS
; i
++)
2438 if (lsi_breakpoints
[i
].type
== type
2439 && lsi_breakpoints
[i
].addr
== addr
2440 && lsi_breakpoints
[i
].len
== len
)
2443 /* Clear the table entry and tell PMON to clear the breakpoint. */
2444 if (i
== MAX_LSI_BREAKPOINTS
)
2446 warning ("common_breakpoint: Attempt to clear bogus breakpoint at %s\n",
2451 lsi_breakpoints
[i
].type
= BREAK_UNUSED
;
2452 sprintf (buf
, "0x0 b 0x%x 0x0", i
);
2453 mips_send_packet (buf
, 1);
2455 rlen
= mips_receive_packet (buf
, 1, mips_receive_wait
);
2458 nfields
= sscanf (buf
, "0x%x b 0x0 0x%x", &rpid
, &rerrflg
);
2460 mips_error ("common_breakpoint: Bad response from remote board: %s", buf
);
2462 return (check_lsi_error (addr
, rerrflg
));
2465 /* set a breakpoint */
2467 /* The LSI PMON "set breakpoint" command has this form:
2468 <pid> 'B' <addr> 0x0
2470 <pid> 'B' <bptn> <code>
2472 The "set data breakpoint" command has this form:
2474 <pid> 'A' <addr1> <type> [<addr2> [<value>]]
2476 where: type= "0x1" = read
2478 "0x3" = access (read or write)
2480 The reply returns two values:
2481 bptn - a breakpoint number, which is a small integer with
2482 possible values of zero through 255.
2483 code - an error return code, a value of zero indicates a
2484 succesful completion, other values indicate various
2485 errors and warnings.
2487 Possible return codes: OK, W_QAL, E_QAL, E_OUT, E_NON.
2491 if (type
== BREAK_FETCH
) /* instruction breakpoint */
2494 sprintf (buf
, "0x0 B 0x%s 0x0", paddr_nz (addr
));
2500 sprintf (buf
, "0x0 A 0x%s 0x%x 0x%s", paddr_nz (addr
),
2501 type
== BREAK_READ
? 1 : (type
== BREAK_WRITE
? 2 : 3),
2502 paddr_nz (addr
+ len
- 1));
2504 mips_send_packet (buf
, 1);
2506 rlen
= mips_receive_packet (buf
, 1, mips_receive_wait
);
2509 nfields
= sscanf (buf
, "0x%x %c 0x%x 0x%x",
2510 &rpid
, &rcmd
, &rresponse
, &rerrflg
);
2511 if (nfields
!= 4 || rcmd
!= cmd
|| rresponse
> 255)
2512 mips_error ("common_breakpoint: Bad response from remote board: %s", buf
);
2515 if (check_lsi_error (addr
, rerrflg
))
2518 /* rresponse contains PMON's breakpoint number. Record the
2519 information for this breakpoint so we can clear it later. */
2520 lsi_breakpoints
[rresponse
].type
= type
;
2521 lsi_breakpoints
[rresponse
].addr
= addr
;
2522 lsi_breakpoints
[rresponse
].len
= len
;
2529 /* On non-LSI targets, the breakpoint command has this form:
2530 0x0 <CMD> <ADDR> <MASK> <FLAGS>
2531 <MASK> is a don't care mask for addresses.
2532 <FLAGS> is any combination of `r', `w', or `f' for read/write/fetch.
2536 mask
= calculate_mask (addr
, len
);
2539 if (set
) /* set a breakpoint */
2544 case BREAK_WRITE
: /* write */
2547 case BREAK_READ
: /* read */
2550 case BREAK_ACCESS
: /* read/write */
2553 case BREAK_FETCH
: /* fetch */
2557 internal_error (__FILE__
, __LINE__
, _("failed internal consistency check"));
2561 sprintf (buf
, "0x0 B 0x%s 0x%s %s", paddr_nz (addr
),
2562 paddr_nz (mask
), flags
);
2567 sprintf (buf
, "0x0 b 0x%s", paddr_nz (addr
));
2570 mips_send_packet (buf
, 1);
2572 rlen
= mips_receive_packet (buf
, 1, mips_receive_wait
);
2575 nfields
= sscanf (buf
, "0x%x %c 0x%x 0x%x",
2576 &rpid
, &rcmd
, &rerrflg
, &rresponse
);
2578 if (nfields
!= 4 || rcmd
!= cmd
)
2579 mips_error ("common_breakpoint: Bad response from remote board: %s",
2584 /* Ddb returns "0x0 b 0x16 0x0\000", whereas
2585 Cogent returns "0x0 b 0xffffffff 0x16\000": */
2586 if (mips_monitor
== MON_DDB
)
2587 rresponse
= rerrflg
;
2588 if (rresponse
!= 22) /* invalid argument */
2589 fprintf_unfiltered (gdb_stderr
,
2590 "common_breakpoint (0x%s): Got error: 0x%x\n",
2591 paddr_nz (addr
), rresponse
);
2599 send_srec (char *srec
, int len
, CORE_ADDR addr
)
2605 serial_write (mips_desc
, srec
, len
);
2607 ch
= mips_readchar (remote_timeout
);
2611 case SERIAL_TIMEOUT
:
2612 error ("Timeout during download.");
2616 case 0x15: /* NACK */
2617 fprintf_unfiltered (gdb_stderr
, "Download got a NACK at byte %s! Retrying.\n", paddr_u (addr
));
2620 error ("Download got unexpected ack char: 0x%x, retrying.\n", ch
);
2625 /* Download a binary file by converting it to S records. */
2628 mips_load_srec (char *args
)
2632 char *buffer
, srec
[1024];
2634 unsigned int srec_frame
= 200;
2636 static int hashmark
= 1;
2638 buffer
= alloca (srec_frame
* 2 + 256);
2640 abfd
= bfd_openr (args
, 0);
2643 printf_filtered ("Unable to open file %s\n", args
);
2647 if (bfd_check_format (abfd
, bfd_object
) == 0)
2649 printf_filtered ("File is not an object file\n");
2653 /* This actually causes a download in the IDT binary format: */
2654 mips_send_command (LOAD_CMD
, 0);
2656 for (s
= abfd
->sections
; s
; s
= s
->next
)
2658 if (s
->flags
& SEC_LOAD
)
2660 unsigned int numbytes
;
2662 /* FIXME! vma too small????? */
2663 printf_filtered ("%s\t: 0x%4lx .. 0x%4lx ", s
->name
,
2665 (long) (s
->vma
+ bfd_get_section_size (s
)));
2666 gdb_flush (gdb_stdout
);
2668 for (i
= 0; i
< bfd_get_section_size (s
); i
+= numbytes
)
2670 numbytes
= min (srec_frame
, bfd_get_section_size (s
) - i
);
2672 bfd_get_section_contents (abfd
, s
, buffer
, i
, numbytes
);
2674 reclen
= mips_make_srec (srec
, '3', s
->vma
+ i
,
2676 send_srec (srec
, reclen
, s
->vma
+ i
);
2678 if (deprecated_ui_load_progress_hook
)
2679 deprecated_ui_load_progress_hook (s
->name
, i
);
2683 putchar_unfiltered ('#');
2684 gdb_flush (gdb_stdout
);
2687 } /* Per-packet (or S-record) loop */
2689 putchar_unfiltered ('\n');
2690 } /* Loadable sections */
2693 putchar_unfiltered ('\n');
2695 /* Write a type 7 terminator record. no data for a type 7, and there
2696 is no data, so len is 0. */
2698 reclen
= mips_make_srec (srec
, '7', abfd
->start_address
, NULL
, 0);
2700 send_srec (srec
, reclen
, abfd
->start_address
);
2702 serial_flush_input (mips_desc
);
2706 * mips_make_srec -- make an srecord. This writes each line, one at a
2707 * time, each with it's own header and trailer line.
2708 * An srecord looks like this:
2710 * byte count-+ address
2711 * start ---+ | | data +- checksum
2713 * S01000006F6B692D746573742E73726563E4
2714 * S315000448600000000000000000FC00005900000000E9
2715 * S31A0004000023C1400037DE00F023604000377B009020825000348D
2716 * S30B0004485A0000000000004E
2719 * S<type><length><address><data><checksum>
2723 * is the number of bytes following upto the checksum. Note that
2724 * this is not the number of chars following, since it takes two
2725 * chars to represent a byte.
2729 * 1) two byte address data record
2730 * 2) three byte address data record
2731 * 3) four byte address data record
2732 * 7) four byte address termination record
2733 * 8) three byte address termination record
2734 * 9) two byte address termination record
2737 * is the start address of the data following, or in the case of
2738 * a termination record, the start address of the image
2742 * is the sum of all the raw byte data in the record, from the length
2743 * upwards, modulo 256 and subtracted from 255.
2745 * This routine returns the length of the S-record.
2750 mips_make_srec (char *buf
, int type
, CORE_ADDR memaddr
, unsigned char *myaddr
,
2753 unsigned char checksum
;
2756 /* Create the header for the srec. addr_size is the number of bytes in the address,
2757 and 1 is the number of bytes in the count. */
2759 /* FIXME!! bigger buf required for 64-bit! */
2762 buf
[2] = len
+ 4 + 1; /* len + 4 byte address + 1 byte checksum */
2763 /* This assumes S3 style downloads (4byte addresses). There should
2764 probably be a check, or the code changed to make it more
2766 buf
[3] = memaddr
>> 24;
2767 buf
[4] = memaddr
>> 16;
2768 buf
[5] = memaddr
>> 8;
2770 memcpy (&buf
[7], myaddr
, len
);
2772 /* Note that the checksum is calculated on the raw data, not the
2773 hexified data. It includes the length, address and the data
2774 portions of the packet. */
2776 buf
+= 2; /* Point at length byte */
2777 for (i
= 0; i
< len
+ 4 + 1; i
++)
2785 /* The following manifest controls whether we enable the simple flow
2786 control support provided by the monitor. If enabled the code will
2787 wait for an affirmative ACK between transmitting packets. */
2788 #define DOETXACK (1)
2790 /* The PMON fast-download uses an encoded packet format constructed of
2791 3byte data packets (encoded as 4 printable ASCII characters), and
2792 escape sequences (preceded by a '/'):
2795 'C' compare checksum (12bit value, not included in checksum calculation)
2796 'S' define symbol name (for addr) terminated with "," and padded to 4char boundary
2797 'Z' zero fill multiple of 3bytes
2798 'B' byte (12bit encoded value, of 8bit data)
2799 'A' address (36bit encoded value)
2800 'E' define entry as original address, and exit load
2802 The packets are processed in 4 character chunks, so the escape
2803 sequences that do not have any data (or variable length data)
2804 should be padded to a 4 character boundary. The decoder will give
2805 an error if the complete message block size is not a multiple of
2806 4bytes (size of record).
2808 The encoding of numbers is done in 6bit fields. The 6bit value is
2809 used to index into this string to get the specific character
2810 encoding for the value: */
2811 static char encoding
[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789,.";
2813 /* Convert the number of bits required into an encoded number, 6bits
2814 at a time (range 0..63). Keep a checksum if required (passed
2815 pointer non-NULL). The function returns the number of encoded
2816 characters written into the buffer. */
2818 pmon_makeb64 (unsigned long v
, char *p
, int n
, int *chksum
)
2820 int count
= (n
/ 6);
2824 fprintf_unfiltered (gdb_stderr
,
2825 "Fast encoding bitcount must be a multiple of 12bits: %dbit%s\n", n
, (n
== 1) ? "" : "s");
2830 fprintf_unfiltered (gdb_stderr
,
2831 "Fast encoding cannot process more than 36bits at the moment: %dbits\n", n
);
2835 /* Deal with the checksum: */
2841 *chksum
+= ((v
>> 24) & 0xFFF);
2843 *chksum
+= ((v
>> 12) & 0xFFF);
2845 *chksum
+= ((v
>> 0) & 0xFFF);
2852 *p
++ = encoding
[(v
>> n
) & 0x3F];
2859 /* Shorthand function (that could be in-lined) to output the zero-fill
2860 escape sequence into the data stream. */
2862 pmon_zeroset (int recsize
, char **buff
, int *amount
, unsigned int *chksum
)
2866 sprintf (*buff
, "/Z");
2867 count
= pmon_makeb64 (*amount
, (*buff
+ 2), 12, chksum
);
2868 *buff
+= (count
+ 2);
2870 return (recsize
+ count
+ 2);
2874 pmon_checkset (int recsize
, char **buff
, int *value
)
2878 /* Add the checksum (without updating the value): */
2879 sprintf (*buff
, "/C");
2880 count
= pmon_makeb64 (*value
, (*buff
+ 2), 12, NULL
);
2881 *buff
+= (count
+ 2);
2882 sprintf (*buff
, "\n");
2883 *buff
+= 2; /* include zero terminator */
2884 /* Forcing a checksum validation clears the sum: */
2886 return (recsize
+ count
+ 3);
2889 /* Amount of padding we leave after at the end of the output buffer,
2890 for the checksum and line termination characters: */
2891 #define CHECKSIZE (4 + 4 + 4 + 2)
2892 /* zero-fill, checksum, transfer end and line termination space. */
2894 /* The amount of binary data loaded from the object file in a single
2896 #define BINCHUNK (1024)
2898 /* Maximum line of data accepted by the monitor: */
2899 #define MAXRECSIZE (550)
2900 /* NOTE: This constant depends on the monitor being used. This value
2901 is for PMON 5.x on the Cogent Vr4300 board. */
2904 pmon_make_fastrec (char **outbuf
, unsigned char *inbuf
, int *inptr
,
2905 int inamount
, int *recsize
, unsigned int *csum
,
2906 unsigned int *zerofill
)
2911 /* This is a simple check to ensure that our data will fit within
2912 the maximum allowable record size. Each record output is 4bytes
2913 in length. We must allow space for a pending zero fill command,
2914 the record, and a checksum record. */
2915 while ((*recsize
< (MAXRECSIZE
- CHECKSIZE
)) && ((inamount
- *inptr
) > 0))
2917 /* Process the binary data: */
2918 if ((inamount
- *inptr
) < 3)
2921 *recsize
= pmon_zeroset (*recsize
, &p
, zerofill
, csum
);
2923 count
= pmon_makeb64 (inbuf
[*inptr
], &p
[2], 12, csum
);
2925 *recsize
+= (2 + count
);
2930 unsigned int value
= ((inbuf
[*inptr
+ 0] << 16) | (inbuf
[*inptr
+ 1] << 8) | inbuf
[*inptr
+ 2]);
2931 /* Simple check for zero data. TODO: A better check would be
2932 to check the last, and then the middle byte for being zero
2933 (if the first byte is not). We could then check for
2934 following runs of zeros, and if above a certain size it is
2935 worth the 4 or 8 character hit of the byte insertions used
2936 to pad to the start of the zeroes. NOTE: This also depends
2937 on the alignment at the end of the zero run. */
2938 if (value
== 0x00000000)
2941 if (*zerofill
== 0xFFF) /* 12bit counter */
2942 *recsize
= pmon_zeroset (*recsize
, &p
, zerofill
, csum
);
2947 *recsize
= pmon_zeroset (*recsize
, &p
, zerofill
, csum
);
2948 count
= pmon_makeb64 (value
, p
, 24, csum
);
2961 pmon_check_ack (char *mesg
)
2963 #if defined(DOETXACK)
2968 c
= serial_readchar (udp_in_use
? udp_desc
: mips_desc
,
2970 if ((c
== SERIAL_TIMEOUT
) || (c
!= 0x06))
2972 fprintf_unfiltered (gdb_stderr
,
2973 "Failed to receive valid ACK for %s\n", mesg
);
2974 return (-1); /* terminate the download */
2977 #endif /* DOETXACK */
2981 /* pmon_download - Send a sequence of characters to the PMON download port,
2982 which is either a serial port or a UDP socket. */
2985 pmon_start_download (void)
2989 /* Create the temporary download file. */
2990 if ((tftp_file
= fopen (tftp_localname
, "w")) == NULL
)
2991 perror_with_name (tftp_localname
);
2995 mips_send_command (udp_in_use
? LOAD_CMD_UDP
: LOAD_CMD
, 0);
2996 mips_expect ("Downloading from ");
2997 mips_expect (udp_in_use
? "udp" : "tty0");
2998 mips_expect (", ^C to abort\r\n");
3003 mips_expect_download (char *string
)
3005 if (!mips_expect (string
))
3007 fprintf_unfiltered (gdb_stderr
, "Load did not complete successfully.\n");
3009 remove (tftp_localname
); /* Remove temporary file */
3017 pmon_check_entry_address (char *entry_address
, int final
)
3019 char hexnumber
[9]; /* includes '\0' space */
3020 mips_expect_timeout (entry_address
, tftp_in_use
? 15 : remote_timeout
);
3021 sprintf (hexnumber
, "%x", final
);
3022 mips_expect (hexnumber
);
3023 mips_expect ("\r\n");
3027 pmon_check_total (int bintotal
)
3029 char hexnumber
[9]; /* includes '\0' space */
3030 mips_expect ("\r\ntotal = 0x");
3031 sprintf (hexnumber
, "%x", bintotal
);
3032 mips_expect (hexnumber
);
3033 return mips_expect_download (" bytes\r\n");
3037 pmon_end_download (int final
, int bintotal
)
3039 char hexnumber
[9]; /* includes '\0' space */
3043 static char *load_cmd_prefix
= "load -b -s ";
3047 /* Close off the temporary file containing the load data. */
3051 /* Make the temporary file readable by the world. */
3052 if (stat (tftp_localname
, &stbuf
) == 0)
3053 chmod (tftp_localname
, stbuf
.st_mode
| S_IROTH
);
3055 /* Must reinitialize the board to prevent PMON from crashing. */
3056 mips_send_command ("initEther\r", -1);
3058 /* Send the load command. */
3059 cmd
= xmalloc (strlen (load_cmd_prefix
) + strlen (tftp_name
) + 2);
3060 strcpy (cmd
, load_cmd_prefix
);
3061 strcat (cmd
, tftp_name
);
3063 mips_send_command (cmd
, 0);
3065 if (!mips_expect_download ("Downloading from "))
3067 if (!mips_expect_download (tftp_name
))
3069 if (!mips_expect_download (", ^C to abort\r\n"))
3073 /* Wait for the stuff that PMON prints after the load has completed.
3074 The timeout value for use in the tftp case (15 seconds) was picked
3075 arbitrarily but might be too small for really large downloads. FIXME. */
3076 switch (mips_monitor
)
3079 pmon_check_ack ("termination");
3080 pmon_check_entry_address ("Entry address is ", final
);
3081 if (!pmon_check_total (bintotal
))
3085 pmon_check_entry_address ("Entry Address = ", final
);
3086 pmon_check_ack ("termination");
3087 if (!pmon_check_total (bintotal
))
3093 remove (tftp_localname
); /* Remove temporary file */
3097 pmon_download (char *buffer
, int length
)
3100 fwrite (buffer
, 1, length
, tftp_file
);
3102 serial_write (udp_in_use
? udp_desc
: mips_desc
, buffer
, length
);
3106 pmon_load_fast (char *file
)
3110 unsigned char *binbuf
;
3113 unsigned int csum
= 0;
3114 int hashmark
= !tftp_in_use
;
3119 buffer
= (char *) xmalloc (MAXRECSIZE
+ 1);
3120 binbuf
= (unsigned char *) xmalloc (BINCHUNK
);
3122 abfd
= bfd_openr (file
, 0);
3125 printf_filtered ("Unable to open file %s\n", file
);
3129 if (bfd_check_format (abfd
, bfd_object
) == 0)
3131 printf_filtered ("File is not an object file\n");
3135 /* Setup the required download state: */
3136 mips_send_command ("set dlproto etxack\r", -1);
3137 mips_send_command ("set dlecho off\r", -1);
3138 /* NOTE: We get a "cannot set variable" message if the variable is
3139 already defined to have the argument we give. The code doesn't
3140 care, since it just scans to the next prompt anyway. */
3141 /* Start the download: */
3142 pmon_start_download ();
3144 /* Zero the checksum */
3145 sprintf (buffer
, "/Kxx\n");
3146 reclen
= strlen (buffer
);
3147 pmon_download (buffer
, reclen
);
3148 finished
= pmon_check_ack ("/Kxx");
3150 for (s
= abfd
->sections
; s
&& !finished
; s
= s
->next
)
3151 if (s
->flags
& SEC_LOAD
) /* only deal with loadable sections */
3153 bintotal
+= bfd_get_section_size (s
);
3154 final
= (s
->vma
+ bfd_get_section_size (s
));
3156 printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s
->name
, (unsigned int) s
->vma
,
3157 (unsigned int) (s
->vma
+ bfd_get_section_size (s
)));
3158 gdb_flush (gdb_stdout
);
3160 /* Output the starting address */
3161 sprintf (buffer
, "/A");
3162 reclen
= pmon_makeb64 (s
->vma
, &buffer
[2], 36, &csum
);
3163 buffer
[2 + reclen
] = '\n';
3164 buffer
[3 + reclen
] = '\0';
3165 reclen
+= 3; /* for the initial escape code and carriage return */
3166 pmon_download (buffer
, reclen
);
3167 finished
= pmon_check_ack ("/A");
3171 unsigned int binamount
;
3172 unsigned int zerofill
= 0;
3179 i
< bfd_get_section_size (s
) && !finished
;
3184 binamount
= min (BINCHUNK
, bfd_get_section_size (s
) - i
);
3186 bfd_get_section_contents (abfd
, s
, binbuf
, i
, binamount
);
3188 /* This keeps a rolling checksum, until we decide to output
3190 for (; ((binamount
- binptr
) > 0);)
3192 pmon_make_fastrec (&bp
, binbuf
, &binptr
, binamount
,
3193 &reclen
, &csum
, &zerofill
);
3194 if (reclen
>= (MAXRECSIZE
- CHECKSIZE
))
3196 reclen
= pmon_checkset (reclen
, &bp
, &csum
);
3197 pmon_download (buffer
, reclen
);
3198 finished
= pmon_check_ack ("data record");
3201 zerofill
= 0; /* do not transmit pending zerofills */
3205 if (deprecated_ui_load_progress_hook
)
3206 deprecated_ui_load_progress_hook (s
->name
, i
);
3210 putchar_unfiltered ('#');
3211 gdb_flush (gdb_stdout
);
3215 reclen
= 0; /* buffer processed */
3220 /* Ensure no out-standing zerofill requests: */
3222 reclen
= pmon_zeroset (reclen
, &bp
, &zerofill
, &csum
);
3224 /* and then flush the line: */
3227 reclen
= pmon_checkset (reclen
, &bp
, &csum
);
3228 /* Currently pmon_checkset outputs the line terminator by
3229 default, so we write out the buffer so far: */
3230 pmon_download (buffer
, reclen
);
3231 finished
= pmon_check_ack ("record remnant");
3235 putchar_unfiltered ('\n');
3238 /* Terminate the transfer. We know that we have an empty output
3239 buffer at this point. */
3240 sprintf (buffer
, "/E/E\n"); /* include dummy padding characters */
3241 reclen
= strlen (buffer
);
3242 pmon_download (buffer
, reclen
);
3245 { /* Ignore the termination message: */
3246 serial_flush_input (udp_in_use
? udp_desc
: mips_desc
);
3249 { /* Deal with termination message: */
3250 pmon_end_download (final
, bintotal
);
3256 /* mips_load -- download a file. */
3259 mips_load (char *file
, int from_tty
)
3261 /* Get the board out of remote debugging mode. */
3262 if (mips_exit_debug ())
3263 error ("mips_load: Couldn't get into monitor mode.");
3265 if (mips_monitor
!= MON_IDT
)
3266 pmon_load_fast (file
);
3268 mips_load_srec (file
);
3272 /* Finally, make the PC point at the start address */
3273 if (mips_monitor
!= MON_IDT
)
3275 /* Work around problem where PMON monitor updates the PC after a load
3276 to a different value than GDB thinks it has. The following ensures
3277 that the write_pc() WILL update the PC value: */
3278 deprecated_register_valid
[gdbarch_pc_regnum (current_gdbarch
)] = 0;
3281 write_pc (bfd_get_start_address (exec_bfd
));
3283 inferior_ptid
= null_ptid
; /* No process now */
3285 /* This is necessary because many things were based on the PC at the time that
3286 we attached to the monitor, which is no longer valid now that we have loaded
3287 new code (and just changed the PC). Another way to do this might be to call
3288 normal_stop, except that the stack may not be valid, and things would get
3289 horribly confused... */
3291 clear_symtab_users ();
3295 /* Pass the command argument as a packet to PMON verbatim. */
3298 pmon_command (char *args
, int from_tty
)
3300 char buf
[DATA_MAXLEN
+ 1];
3303 sprintf (buf
, "0x0 %s", args
);
3304 mips_send_packet (buf
, 1);
3305 printf_filtered ("Send packet: %s\n", buf
);
3307 rlen
= mips_receive_packet (buf
, 1, mips_receive_wait
);
3309 printf_filtered ("Received packet: %s\n", buf
);
3312 extern initialize_file_ftype _initialize_remote_mips
; /* -Wmissing-prototypes */
3315 _initialize_remote_mips (void)
3317 /* Initialize the fields in mips_ops that are common to all four targets. */
3318 mips_ops
.to_longname
= "Remote MIPS debugging over serial line";
3319 mips_ops
.to_close
= mips_close
;
3320 mips_ops
.to_detach
= mips_detach
;
3321 mips_ops
.to_resume
= mips_resume
;
3322 mips_ops
.to_fetch_registers
= mips_fetch_registers
;
3323 mips_ops
.to_store_registers
= mips_store_registers
;
3324 mips_ops
.to_prepare_to_store
= mips_prepare_to_store
;
3325 mips_ops
.deprecated_xfer_memory
= mips_xfer_memory
;
3326 mips_ops
.to_files_info
= mips_files_info
;
3327 mips_ops
.to_insert_breakpoint
= mips_insert_breakpoint
;
3328 mips_ops
.to_remove_breakpoint
= mips_remove_breakpoint
;
3329 mips_ops
.to_insert_watchpoint
= mips_insert_watchpoint
;
3330 mips_ops
.to_remove_watchpoint
= mips_remove_watchpoint
;
3331 mips_ops
.to_stopped_by_watchpoint
= mips_stopped_by_watchpoint
;
3332 mips_ops
.to_can_use_hw_breakpoint
= mips_can_use_watchpoint
;
3333 mips_ops
.to_kill
= mips_kill
;
3334 mips_ops
.to_load
= mips_load
;
3335 mips_ops
.to_create_inferior
= mips_create_inferior
;
3336 mips_ops
.to_mourn_inferior
= mips_mourn_inferior
;
3337 mips_ops
.to_stratum
= process_stratum
;
3338 mips_ops
.to_has_all_memory
= 1;
3339 mips_ops
.to_has_memory
= 1;
3340 mips_ops
.to_has_stack
= 1;
3341 mips_ops
.to_has_registers
= 1;
3342 mips_ops
.to_has_execution
= 1;
3343 mips_ops
.to_magic
= OPS_MAGIC
;
3345 /* Copy the common fields to all four target vectors. */
3346 pmon_ops
= ddb_ops
= lsi_ops
= mips_ops
;
3348 /* Initialize target-specific fields in the target vectors. */
3349 mips_ops
.to_shortname
= "mips";
3350 mips_ops
.to_doc
= "\
3351 Debug a board using the MIPS remote debugging protocol over a serial line.\n\
3352 The argument is the device it is connected to or, if it contains a colon,\n\
3353 HOST:PORT to access a board over a network";
3354 mips_ops
.to_open
= mips_open
;
3355 mips_ops
.to_wait
= mips_wait
;
3357 pmon_ops
.to_shortname
= "pmon";
3358 pmon_ops
.to_doc
= "\
3359 Debug a board using the PMON MIPS remote debugging protocol over a serial\n\
3360 line. The argument is the device it is connected to or, if it contains a\n\
3361 colon, HOST:PORT to access a board over a network";
3362 pmon_ops
.to_open
= pmon_open
;
3363 pmon_ops
.to_wait
= mips_wait
;
3365 ddb_ops
.to_shortname
= "ddb";
3367 Debug a board using the PMON MIPS remote debugging protocol over a serial\n\
3368 line. The first argument is the device it is connected to or, if it contains\n\
3369 a colon, HOST:PORT to access a board over a network. The optional second\n\
3370 parameter is the temporary file in the form HOST:FILENAME to be used for\n\
3371 TFTP downloads to the board. The optional third parameter is the local name\n\
3372 of the TFTP temporary file, if it differs from the filename seen by the board.";
3373 ddb_ops
.to_open
= ddb_open
;
3374 ddb_ops
.to_wait
= mips_wait
;
3376 lsi_ops
.to_shortname
= "lsi";
3377 lsi_ops
.to_doc
= pmon_ops
.to_doc
;
3378 lsi_ops
.to_open
= lsi_open
;
3379 lsi_ops
.to_wait
= mips_wait
;
3381 /* Add the targets. */
3382 add_target (&mips_ops
);
3383 add_target (&pmon_ops
);
3384 add_target (&ddb_ops
);
3385 add_target (&lsi_ops
);
3387 add_setshow_zinteger_cmd ("timeout", no_class
, &mips_receive_wait
, _("\
3388 Set timeout in seconds for remote MIPS serial I/O."), _("\
3389 Show timeout in seconds for remote MIPS serial I/O."), NULL
,
3391 NULL
, /* FIXME: i18n: */
3392 &setlist
, &showlist
);
3394 add_setshow_zinteger_cmd ("retransmit-timeout", no_class
,
3395 &mips_retransmit_wait
, _("\
3396 Set retransmit timeout in seconds for remote MIPS serial I/O."), _("\
3397 Show retransmit timeout in seconds for remote MIPS serial I/O."), _("\
3398 This is the number of seconds to wait for an acknowledgement to a packet\n\
3399 before resending the packet."),
3401 NULL
, /* FIXME: i18n: */
3402 &setlist
, &showlist
);
3404 add_setshow_zinteger_cmd ("syn-garbage-limit", no_class
,
3405 &mips_syn_garbage
, _("\
3406 Set the maximum number of characters to ignore when scanning for a SYN."), _("\
3407 Show the maximum number of characters to ignore when scanning for a SYN."), _("\
3408 This is the maximum number of characters GDB will ignore when trying to\n\
3409 synchronize with the remote system. A value of -1 means that there is no\n\
3410 limit. (Note that these characters are printed out even though they are\n\
3413 NULL
, /* FIXME: i18n: */
3414 &setlist
, &showlist
);
3416 add_setshow_string_cmd ("monitor-prompt", class_obscure
,
3417 &mips_monitor_prompt
, _("\
3418 Set the prompt that GDB expects from the monitor."), _("\
3419 Show the prompt that GDB expects from the monitor."), NULL
,
3421 NULL
, /* FIXME: i18n: */
3422 &setlist
, &showlist
);
3424 add_setshow_zinteger_cmd ("monitor-warnings", class_obscure
,
3425 &monitor_warnings
, _("\
3426 Set printing of monitor warnings."), _("\
3427 Show printing of monitor warnings."), _("\
3428 When enabled, monitor warnings about hardware breakpoints will be displayed."),
3430 NULL
, /* FIXME: i18n: */
3431 &setlist
, &showlist
);
3433 add_com ("pmon", class_obscure
, pmon_command
,
3434 _("Send a packet to PMON (must be in debug mode)."));
3436 add_setshow_boolean_cmd ("mask-address", no_class
, &mask_address_p
, _("\
3437 Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
3438 Show zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
3439 Use \"on\" to enable the masking and \"off\" to disable it."),
3441 NULL
, /* FIXME: i18n: */
3442 &setlist
, &showlist
);