1 /* Target-dependent code for GDB, the GNU debugger.
2 Copyright 1986, 1987, 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997,
3 1998, 1999, 2000, 2001, 2002, 2003
4 Free Software Foundation, Inc.
6 This file is part of GDB.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; either version 2 of the License, or
11 (at your option) any later version.
13 This program is distributed in the hope that it will be useful,
14 but WITHOUT ANY WARRANTY; without even the implied warranty of
15 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 GNU General Public License for more details.
18 You should have received a copy of the GNU General Public License
19 along with this program; if not, write to the Free Software
20 Foundation, Inc., 59 Temple Place - Suite 330,
21 Boston, MA 02111-1307, USA. */
32 #include "arch-utils.h"
36 #include "parser-defs.h"
39 #include "libbfd.h" /* for bfd_default_set_arch_mach */
40 #include "coff/internal.h" /* for libcoff.h */
41 #include "libcoff.h" /* for xcoff_data */
42 #include "coff/xcoff.h"
47 #include "solib-svr4.h"
50 #include "gdb_assert.h"
53 /* If the kernel has to deliver a signal, it pushes a sigcontext
54 structure on the stack and then calls the signal handler, passing
55 the address of the sigcontext in an argument register. Usually
56 the signal handler doesn't save this register, so we have to
57 access the sigcontext structure via an offset from the signal handler
59 The following constants were determined by experimentation on AIX 3.2. */
60 #define SIG_FRAME_PC_OFFSET 96
61 #define SIG_FRAME_LR_OFFSET 108
62 #define SIG_FRAME_FP_OFFSET 284
64 /* To be used by skip_prologue. */
66 struct rs6000_framedata
68 int offset
; /* total size of frame --- the distance
69 by which we decrement sp to allocate
71 int saved_gpr
; /* smallest # of saved gpr */
72 int saved_fpr
; /* smallest # of saved fpr */
73 int saved_vr
; /* smallest # of saved vr */
74 int saved_ev
; /* smallest # of saved ev */
75 int alloca_reg
; /* alloca register number (frame ptr) */
76 char frameless
; /* true if frameless functions. */
77 char nosavedpc
; /* true if pc not saved. */
78 int gpr_offset
; /* offset of saved gprs from prev sp */
79 int fpr_offset
; /* offset of saved fprs from prev sp */
80 int vr_offset
; /* offset of saved vrs from prev sp */
81 int ev_offset
; /* offset of saved evs from prev sp */
82 int lr_offset
; /* offset of saved lr */
83 int cr_offset
; /* offset of saved cr */
84 int vrsave_offset
; /* offset of saved vrsave register */
87 /* Description of a single register. */
91 char *name
; /* name of register */
92 unsigned char sz32
; /* size on 32-bit arch, 0 if nonextant */
93 unsigned char sz64
; /* size on 64-bit arch, 0 if nonextant */
94 unsigned char fpr
; /* whether register is floating-point */
95 unsigned char pseudo
; /* whether register is pseudo */
98 /* Breakpoint shadows for the single step instructions will be kept here. */
100 static struct sstep_breaks
102 /* Address, or 0 if this is not in use. */
104 /* Shadow contents. */
109 /* Hook for determining the TOC address when calling functions in the
110 inferior under AIX. The initialization code in rs6000-nat.c sets
111 this hook to point to find_toc_address. */
113 CORE_ADDR (*rs6000_find_toc_address_hook
) (CORE_ADDR
) = NULL
;
115 /* Hook to set the current architecture when starting a child process.
116 rs6000-nat.c sets this. */
118 void (*rs6000_set_host_arch_hook
) (int) = NULL
;
120 /* Static function prototypes */
122 static CORE_ADDR
branch_dest (int opcode
, int instr
, CORE_ADDR pc
,
124 static CORE_ADDR
skip_prologue (CORE_ADDR
, CORE_ADDR
,
125 struct rs6000_framedata
*);
126 static void frame_get_saved_regs (struct frame_info
* fi
,
127 struct rs6000_framedata
* fdatap
);
128 static CORE_ADDR
frame_initial_stack_address (struct frame_info
*);
130 /* Is REGNO an AltiVec register? Return 1 if so, 0 otherwise. */
132 altivec_register_p (int regno
)
134 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
135 if (tdep
->ppc_vr0_regnum
< 0 || tdep
->ppc_vrsave_regnum
< 0)
138 return (regno
>= tdep
->ppc_vr0_regnum
&& regno
<= tdep
->ppc_vrsave_regnum
);
141 /* Use the architectures FP registers? */
143 ppc_floating_point_unit_p (struct gdbarch
*gdbarch
)
145 const struct bfd_arch_info
*info
= gdbarch_bfd_arch_info (gdbarch
);
146 if (info
->arch
== bfd_arch_powerpc
)
147 return (info
->mach
!= bfd_mach_ppc_e500
);
148 if (info
->arch
== bfd_arch_rs6000
)
153 /* Read a LEN-byte address from debugged memory address MEMADDR. */
156 read_memory_addr (CORE_ADDR memaddr
, int len
)
158 return read_memory_unsigned_integer (memaddr
, len
);
162 rs6000_skip_prologue (CORE_ADDR pc
)
164 struct rs6000_framedata frame
;
165 pc
= skip_prologue (pc
, 0, &frame
);
170 /* Fill in fi->saved_regs */
172 struct frame_extra_info
174 /* Functions calling alloca() change the value of the stack
175 pointer. We need to use initial stack pointer (which is saved in
176 r31 by gcc) in such cases. If a compiler emits traceback table,
177 then we should use the alloca register specified in traceback
179 CORE_ADDR initial_sp
; /* initial stack pointer. */
183 rs6000_init_extra_frame_info (int fromleaf
, struct frame_info
*fi
)
185 struct frame_extra_info
*extra_info
=
186 frame_extra_info_zalloc (fi
, sizeof (struct frame_extra_info
));
187 extra_info
->initial_sp
= 0;
188 if (get_next_frame (fi
) != NULL
189 && get_frame_pc (fi
) < TEXT_SEGMENT_BASE
)
190 /* We're in get_prev_frame */
191 /* and this is a special signal frame. */
192 /* (fi->pc will be some low address in the kernel, */
193 /* to which the signal handler returns). */
194 deprecated_set_frame_type (fi
, SIGTRAMP_FRAME
);
197 /* Put here the code to store, into a struct frame_saved_regs,
198 the addresses of the saved registers of frame described by FRAME_INFO.
199 This includes special registers such as pc and fp saved in special
200 ways in the stack frame. sp is even more special:
201 the address we return for it IS the sp for the next frame. */
203 /* In this implementation for RS/6000, we do *not* save sp. I am
204 not sure if it will be needed. The following function takes care of gpr's
208 rs6000_frame_init_saved_regs (struct frame_info
*fi
)
210 frame_get_saved_regs (fi
, NULL
);
214 rs6000_frame_args_address (struct frame_info
*fi
)
216 struct frame_extra_info
*extra_info
= get_frame_extra_info (fi
);
217 if (extra_info
->initial_sp
!= 0)
218 return extra_info
->initial_sp
;
220 return frame_initial_stack_address (fi
);
223 /* Immediately after a function call, return the saved pc.
224 Can't go through the frames for this because on some machines
225 the new frame is not set up until the new function executes
226 some instructions. */
229 rs6000_saved_pc_after_call (struct frame_info
*fi
)
231 return read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
);
234 /* Get the ith function argument for the current function. */
236 rs6000_fetch_pointer_argument (struct frame_info
*frame
, int argi
,
240 frame_read_register (frame
, 3 + argi
, &addr
);
244 /* Calculate the destination of a branch/jump. Return -1 if not a branch. */
247 branch_dest (int opcode
, int instr
, CORE_ADDR pc
, CORE_ADDR safety
)
254 absolute
= (int) ((instr
>> 1) & 1);
259 immediate
= ((instr
& ~3) << 6) >> 6; /* br unconditional */
263 dest
= pc
+ immediate
;
267 immediate
= ((instr
& ~3) << 16) >> 16; /* br conditional */
271 dest
= pc
+ immediate
;
275 ext_op
= (instr
>> 1) & 0x3ff;
277 if (ext_op
== 16) /* br conditional register */
279 dest
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
) & ~3;
281 /* If we are about to return from a signal handler, dest is
282 something like 0x3c90. The current frame is a signal handler
283 caller frame, upon completion of the sigreturn system call
284 execution will return to the saved PC in the frame. */
285 if (dest
< TEXT_SEGMENT_BASE
)
287 struct frame_info
*fi
;
289 fi
= get_current_frame ();
291 dest
= read_memory_addr (get_frame_base (fi
) + SIG_FRAME_PC_OFFSET
,
292 gdbarch_tdep (current_gdbarch
)->wordsize
);
296 else if (ext_op
== 528) /* br cond to count reg */
298 dest
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_ctr_regnum
) & ~3;
300 /* If we are about to execute a system call, dest is something
301 like 0x22fc or 0x3b00. Upon completion the system call
302 will return to the address in the link register. */
303 if (dest
< TEXT_SEGMENT_BASE
)
304 dest
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
) & ~3;
313 return (dest
< TEXT_SEGMENT_BASE
) ? safety
: dest
;
317 /* Sequence of bytes for breakpoint instruction. */
319 const static unsigned char *
320 rs6000_breakpoint_from_pc (CORE_ADDR
*bp_addr
, int *bp_size
)
322 static unsigned char big_breakpoint
[] = { 0x7d, 0x82, 0x10, 0x08 };
323 static unsigned char little_breakpoint
[] = { 0x08, 0x10, 0x82, 0x7d };
325 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
)
326 return big_breakpoint
;
328 return little_breakpoint
;
332 /* AIX does not support PT_STEP. Simulate it. */
335 rs6000_software_single_step (enum target_signal signal
,
336 int insert_breakpoints_p
)
340 const char *breakp
= rs6000_breakpoint_from_pc (&dummy
, &breakp_sz
);
346 if (insert_breakpoints_p
)
351 insn
= read_memory_integer (loc
, 4);
353 breaks
[0] = loc
+ breakp_sz
;
355 breaks
[1] = branch_dest (opcode
, insn
, loc
, breaks
[0]);
357 /* Don't put two breakpoints on the same address. */
358 if (breaks
[1] == breaks
[0])
361 stepBreaks
[1].address
= 0;
363 for (ii
= 0; ii
< 2; ++ii
)
366 /* ignore invalid breakpoint. */
367 if (breaks
[ii
] == -1)
369 target_insert_breakpoint (breaks
[ii
], stepBreaks
[ii
].data
);
370 stepBreaks
[ii
].address
= breaks
[ii
];
377 /* remove step breakpoints. */
378 for (ii
= 0; ii
< 2; ++ii
)
379 if (stepBreaks
[ii
].address
!= 0)
380 target_remove_breakpoint (stepBreaks
[ii
].address
,
381 stepBreaks
[ii
].data
);
383 errno
= 0; /* FIXME, don't ignore errors! */
384 /* What errors? {read,write}_memory call error(). */
388 /* return pc value after skipping a function prologue and also return
389 information about a function frame.
391 in struct rs6000_framedata fdata:
392 - frameless is TRUE, if function does not have a frame.
393 - nosavedpc is TRUE, if function does not save %pc value in its frame.
394 - offset is the initial size of this stack frame --- the amount by
395 which we decrement the sp to allocate the frame.
396 - saved_gpr is the number of the first saved gpr.
397 - saved_fpr is the number of the first saved fpr.
398 - saved_vr is the number of the first saved vr.
399 - saved_ev is the number of the first saved ev.
400 - alloca_reg is the number of the register used for alloca() handling.
402 - gpr_offset is the offset of the first saved gpr from the previous frame.
403 - fpr_offset is the offset of the first saved fpr from the previous frame.
404 - vr_offset is the offset of the first saved vr from the previous frame.
405 - ev_offset is the offset of the first saved ev from the previous frame.
406 - lr_offset is the offset of the saved lr
407 - cr_offset is the offset of the saved cr
408 - vrsave_offset is the offset of the saved vrsave register
411 #define SIGNED_SHORT(x) \
412 ((sizeof (short) == 2) \
413 ? ((int)(short)(x)) \
414 : ((int)((((x) & 0xffff) ^ 0x8000) - 0x8000)))
416 #define GET_SRC_REG(x) (((x) >> 21) & 0x1f)
418 /* Limit the number of skipped non-prologue instructions, as the examining
419 of the prologue is expensive. */
420 static int max_skip_non_prologue_insns
= 10;
422 /* Given PC representing the starting address of a function, and
423 LIM_PC which is the (sloppy) limit to which to scan when looking
424 for a prologue, attempt to further refine this limit by using
425 the line data in the symbol table. If successful, a better guess
426 on where the prologue ends is returned, otherwise the previous
427 value of lim_pc is returned. */
429 refine_prologue_limit (CORE_ADDR pc
, CORE_ADDR lim_pc
)
431 struct symtab_and_line prologue_sal
;
433 prologue_sal
= find_pc_line (pc
, 0);
434 if (prologue_sal
.line
!= 0)
437 CORE_ADDR addr
= prologue_sal
.end
;
439 /* Handle the case in which compiler's optimizer/scheduler
440 has moved instructions into the prologue. We scan ahead
441 in the function looking for address ranges whose corresponding
442 line number is less than or equal to the first one that we
443 found for the function. (It can be less than when the
444 scheduler puts a body instruction before the first prologue
446 for (i
= 2 * max_skip_non_prologue_insns
;
447 i
> 0 && (lim_pc
== 0 || addr
< lim_pc
);
450 struct symtab_and_line sal
;
452 sal
= find_pc_line (addr
, 0);
455 if (sal
.line
<= prologue_sal
.line
456 && sal
.symtab
== prologue_sal
.symtab
)
463 if (lim_pc
== 0 || prologue_sal
.end
< lim_pc
)
464 lim_pc
= prologue_sal
.end
;
471 skip_prologue (CORE_ADDR pc
, CORE_ADDR lim_pc
, struct rs6000_framedata
*fdata
)
473 CORE_ADDR orig_pc
= pc
;
474 CORE_ADDR last_prologue_pc
= pc
;
475 CORE_ADDR li_found_pc
= 0;
479 long vr_saved_offset
= 0;
488 int minimal_toc_loaded
= 0;
489 int prev_insn_was_prologue_insn
= 1;
490 int num_skip_non_prologue_insns
= 0;
491 const struct bfd_arch_info
*arch_info
= gdbarch_bfd_arch_info (current_gdbarch
);
492 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
494 /* Attempt to find the end of the prologue when no limit is specified.
495 Note that refine_prologue_limit() has been written so that it may
496 be used to "refine" the limits of non-zero PC values too, but this
497 is only safe if we 1) trust the line information provided by the
498 compiler and 2) iterate enough to actually find the end of the
501 It may become a good idea at some point (for both performance and
502 accuracy) to unconditionally call refine_prologue_limit(). But,
503 until we can make a clear determination that this is beneficial,
504 we'll play it safe and only use it to obtain a limit when none
505 has been specified. */
507 lim_pc
= refine_prologue_limit (pc
, lim_pc
);
509 memset (fdata
, 0, sizeof (struct rs6000_framedata
));
510 fdata
->saved_gpr
= -1;
511 fdata
->saved_fpr
= -1;
512 fdata
->saved_vr
= -1;
513 fdata
->saved_ev
= -1;
514 fdata
->alloca_reg
= -1;
515 fdata
->frameless
= 1;
516 fdata
->nosavedpc
= 1;
520 /* Sometimes it isn't clear if an instruction is a prologue
521 instruction or not. When we encounter one of these ambiguous
522 cases, we'll set prev_insn_was_prologue_insn to 0 (false).
523 Otherwise, we'll assume that it really is a prologue instruction. */
524 if (prev_insn_was_prologue_insn
)
525 last_prologue_pc
= pc
;
527 /* Stop scanning if we've hit the limit. */
528 if (lim_pc
!= 0 && pc
>= lim_pc
)
531 prev_insn_was_prologue_insn
= 1;
533 /* Fetch the instruction and convert it to an integer. */
534 if (target_read_memory (pc
, buf
, 4))
536 op
= extract_signed_integer (buf
, 4);
538 if ((op
& 0xfc1fffff) == 0x7c0802a6)
540 lr_reg
= (op
& 0x03e00000);
544 else if ((op
& 0xfc1fffff) == 0x7c000026)
546 cr_reg
= (op
& 0x03e00000);
550 else if ((op
& 0xfc1f0000) == 0xd8010000)
551 { /* stfd Rx,NUM(r1) */
552 reg
= GET_SRC_REG (op
);
553 if (fdata
->saved_fpr
== -1 || fdata
->saved_fpr
> reg
)
555 fdata
->saved_fpr
= reg
;
556 fdata
->fpr_offset
= SIGNED_SHORT (op
) + offset
;
561 else if (((op
& 0xfc1f0000) == 0xbc010000) || /* stm Rx, NUM(r1) */
562 (((op
& 0xfc1f0000) == 0x90010000 || /* st rx,NUM(r1) */
563 (op
& 0xfc1f0003) == 0xf8010000) && /* std rx,NUM(r1) */
564 (op
& 0x03e00000) >= 0x01a00000)) /* rx >= r13 */
567 reg
= GET_SRC_REG (op
);
568 if (fdata
->saved_gpr
== -1 || fdata
->saved_gpr
> reg
)
570 fdata
->saved_gpr
= reg
;
571 if ((op
& 0xfc1f0003) == 0xf8010000)
573 fdata
->gpr_offset
= SIGNED_SHORT (op
) + offset
;
578 else if ((op
& 0xffff0000) == 0x60000000)
581 /* Allow nops in the prologue, but do not consider them to
582 be part of the prologue unless followed by other prologue
584 prev_insn_was_prologue_insn
= 0;
588 else if ((op
& 0xffff0000) == 0x3c000000)
589 { /* addis 0,0,NUM, used
591 fdata
->offset
= (op
& 0x0000ffff) << 16;
592 fdata
->frameless
= 0;
596 else if ((op
& 0xffff0000) == 0x60000000)
597 { /* ori 0,0,NUM, 2nd ha
598 lf of >= 32k frames */
599 fdata
->offset
|= (op
& 0x0000ffff);
600 fdata
->frameless
= 0;
604 else if (lr_reg
!= -1 &&
605 /* std Rx, NUM(r1) || stdu Rx, NUM(r1) */
606 (((op
& 0xffff0000) == (lr_reg
| 0xf8010000)) ||
607 /* stw Rx, NUM(r1) */
608 ((op
& 0xffff0000) == (lr_reg
| 0x90010000)) ||
609 /* stwu Rx, NUM(r1) */
610 ((op
& 0xffff0000) == (lr_reg
| 0x94010000))))
611 { /* where Rx == lr */
612 fdata
->lr_offset
= offset
;
613 fdata
->nosavedpc
= 0;
615 if ((op
& 0xfc000003) == 0xf8000000 || /* std */
616 (op
& 0xfc000000) == 0x90000000) /* stw */
618 /* Does not update r1, so add displacement to lr_offset. */
619 fdata
->lr_offset
+= SIGNED_SHORT (op
);
624 else if (cr_reg
!= -1 &&
625 /* std Rx, NUM(r1) || stdu Rx, NUM(r1) */
626 (((op
& 0xffff0000) == (cr_reg
| 0xf8010000)) ||
627 /* stw Rx, NUM(r1) */
628 ((op
& 0xffff0000) == (cr_reg
| 0x90010000)) ||
629 /* stwu Rx, NUM(r1) */
630 ((op
& 0xffff0000) == (cr_reg
| 0x94010000))))
631 { /* where Rx == cr */
632 fdata
->cr_offset
= offset
;
634 if ((op
& 0xfc000003) == 0xf8000000 ||
635 (op
& 0xfc000000) == 0x90000000)
637 /* Does not update r1, so add displacement to cr_offset. */
638 fdata
->cr_offset
+= SIGNED_SHORT (op
);
643 else if (op
== 0x48000005)
649 else if (op
== 0x48000004)
654 else if ((op
& 0xffff0000) == 0x3fc00000 || /* addis 30,0,foo@ha, used
655 in V.4 -mminimal-toc */
656 (op
& 0xffff0000) == 0x3bde0000)
657 { /* addi 30,30,foo@l */
661 else if ((op
& 0xfc000001) == 0x48000001)
665 fdata
->frameless
= 0;
666 /* Don't skip over the subroutine call if it is not within
667 the first three instructions of the prologue. */
668 if ((pc
- orig_pc
) > 8)
671 op
= read_memory_integer (pc
+ 4, 4);
673 /* At this point, make sure this is not a trampoline
674 function (a function that simply calls another functions,
675 and nothing else). If the next is not a nop, this branch
676 was part of the function prologue. */
678 if (op
== 0x4def7b82 || op
== 0) /* crorc 15, 15, 15 */
679 break; /* don't skip over
684 /* update stack pointer */
685 else if ((op
& 0xfc1f0000) == 0x94010000)
686 { /* stu rX,NUM(r1) || stwu rX,NUM(r1) */
687 fdata
->frameless
= 0;
688 fdata
->offset
= SIGNED_SHORT (op
);
689 offset
= fdata
->offset
;
692 else if ((op
& 0xfc1f016a) == 0x7c01016e)
693 { /* stwux rX,r1,rY */
694 /* no way to figure out what r1 is going to be */
695 fdata
->frameless
= 0;
696 offset
= fdata
->offset
;
699 else if ((op
& 0xfc1f0003) == 0xf8010001)
700 { /* stdu rX,NUM(r1) */
701 fdata
->frameless
= 0;
702 fdata
->offset
= SIGNED_SHORT (op
& ~3UL);
703 offset
= fdata
->offset
;
706 else if ((op
& 0xfc1f016a) == 0x7c01016a)
707 { /* stdux rX,r1,rY */
708 /* no way to figure out what r1 is going to be */
709 fdata
->frameless
= 0;
710 offset
= fdata
->offset
;
713 /* Load up minimal toc pointer */
714 else if (((op
>> 22) == 0x20f || /* l r31,... or l r30,... */
715 (op
>> 22) == 0x3af) /* ld r31,... or ld r30,... */
716 && !minimal_toc_loaded
)
718 minimal_toc_loaded
= 1;
721 /* move parameters from argument registers to local variable
724 else if ((op
& 0xfc0007fe) == 0x7c000378 && /* mr(.) Rx,Ry */
725 (((op
>> 21) & 31) >= 3) && /* R3 >= Ry >= R10 */
726 (((op
>> 21) & 31) <= 10) &&
727 ((long) ((op
>> 16) & 31) >= fdata
->saved_gpr
)) /* Rx: local var reg */
731 /* store parameters in stack */
733 else if ((op
& 0xfc1f0003) == 0xf8010000 || /* std rx,NUM(r1) */
734 (op
& 0xfc1f0000) == 0xd8010000 || /* stfd Rx,NUM(r1) */
735 (op
& 0xfc1f0000) == 0xfc010000) /* frsp, fp?,NUM(r1) */
739 /* store parameters in stack via frame pointer */
742 ((op
& 0xfc1f0000) == 0x901f0000 || /* st rx,NUM(r1) */
743 (op
& 0xfc1f0000) == 0xd81f0000 || /* stfd Rx,NUM(r1) */
744 (op
& 0xfc1f0000) == 0xfc1f0000))
745 { /* frsp, fp?,NUM(r1) */
748 /* Set up frame pointer */
750 else if (op
== 0x603f0000 /* oril r31, r1, 0x0 */
753 fdata
->frameless
= 0;
755 fdata
->alloca_reg
= (tdep
->ppc_gp0_regnum
+ 31);
758 /* Another way to set up the frame pointer. */
760 else if ((op
& 0xfc1fffff) == 0x38010000)
761 { /* addi rX, r1, 0x0 */
762 fdata
->frameless
= 0;
764 fdata
->alloca_reg
= (tdep
->ppc_gp0_regnum
765 + ((op
& ~0x38010000) >> 21));
768 /* AltiVec related instructions. */
769 /* Store the vrsave register (spr 256) in another register for
770 later manipulation, or load a register into the vrsave
771 register. 2 instructions are used: mfvrsave and
772 mtvrsave. They are shorthand notation for mfspr Rn, SPR256
773 and mtspr SPR256, Rn. */
774 /* mfspr Rn SPR256 == 011111 nnnnn 0000001000 01010100110
775 mtspr SPR256 Rn == 011111 nnnnn 0000001000 01110100110 */
776 else if ((op
& 0xfc1fffff) == 0x7c0042a6) /* mfvrsave Rn */
778 vrsave_reg
= GET_SRC_REG (op
);
781 else if ((op
& 0xfc1fffff) == 0x7c0043a6) /* mtvrsave Rn */
785 /* Store the register where vrsave was saved to onto the stack:
786 rS is the register where vrsave was stored in a previous
788 /* 100100 sssss 00001 dddddddd dddddddd */
789 else if ((op
& 0xfc1f0000) == 0x90010000) /* stw rS, d(r1) */
791 if (vrsave_reg
== GET_SRC_REG (op
))
793 fdata
->vrsave_offset
= SIGNED_SHORT (op
) + offset
;
798 /* Compute the new value of vrsave, by modifying the register
799 where vrsave was saved to. */
800 else if (((op
& 0xfc000000) == 0x64000000) /* oris Ra, Rs, UIMM */
801 || ((op
& 0xfc000000) == 0x60000000))/* ori Ra, Rs, UIMM */
805 /* li r0, SIMM (short for addi r0, 0, SIMM). This is the first
806 in a pair of insns to save the vector registers on the
808 /* 001110 00000 00000 iiii iiii iiii iiii */
809 /* 001110 01110 00000 iiii iiii iiii iiii */
810 else if ((op
& 0xffff0000) == 0x38000000 /* li r0, SIMM */
811 || (op
& 0xffff0000) == 0x39c00000) /* li r14, SIMM */
814 vr_saved_offset
= SIGNED_SHORT (op
);
816 /* Store vector register S at (r31+r0) aligned to 16 bytes. */
817 /* 011111 sssss 11111 00000 00111001110 */
818 else if ((op
& 0xfc1fffff) == 0x7c1f01ce) /* stvx Vs, R31, R0 */
820 if (pc
== (li_found_pc
+ 4))
822 vr_reg
= GET_SRC_REG (op
);
823 /* If this is the first vector reg to be saved, or if
824 it has a lower number than others previously seen,
825 reupdate the frame info. */
826 if (fdata
->saved_vr
== -1 || fdata
->saved_vr
> vr_reg
)
828 fdata
->saved_vr
= vr_reg
;
829 fdata
->vr_offset
= vr_saved_offset
+ offset
;
831 vr_saved_offset
= -1;
836 /* End AltiVec related instructions. */
838 /* Start BookE related instructions. */
839 /* Store gen register S at (r31+uimm).
840 Any register less than r13 is volatile, so we don't care. */
841 /* 000100 sssss 11111 iiiii 01100100001 */
842 else if (arch_info
->mach
== bfd_mach_ppc_e500
843 && (op
& 0xfc1f07ff) == 0x101f0321) /* evstdd Rs,uimm(R31) */
845 if ((op
& 0x03e00000) >= 0x01a00000) /* Rs >= r13 */
848 ev_reg
= GET_SRC_REG (op
);
849 imm
= (op
>> 11) & 0x1f;
851 /* If this is the first vector reg to be saved, or if
852 it has a lower number than others previously seen,
853 reupdate the frame info. */
854 if (fdata
->saved_ev
== -1 || fdata
->saved_ev
> ev_reg
)
856 fdata
->saved_ev
= ev_reg
;
857 fdata
->ev_offset
= ev_offset
+ offset
;
862 /* Store gen register rS at (r1+rB). */
863 /* 000100 sssss 00001 bbbbb 01100100000 */
864 else if (arch_info
->mach
== bfd_mach_ppc_e500
865 && (op
& 0xffe007ff) == 0x13e00320) /* evstddx RS,R1,Rb */
867 if (pc
== (li_found_pc
+ 4))
869 ev_reg
= GET_SRC_REG (op
);
870 /* If this is the first vector reg to be saved, or if
871 it has a lower number than others previously seen,
872 reupdate the frame info. */
873 /* We know the contents of rB from the previous instruction. */
874 if (fdata
->saved_ev
== -1 || fdata
->saved_ev
> ev_reg
)
876 fdata
->saved_ev
= ev_reg
;
877 fdata
->ev_offset
= vr_saved_offset
+ offset
;
879 vr_saved_offset
= -1;
885 /* Store gen register r31 at (rA+uimm). */
886 /* 000100 11111 aaaaa iiiii 01100100001 */
887 else if (arch_info
->mach
== bfd_mach_ppc_e500
888 && (op
& 0xffe007ff) == 0x13e00321) /* evstdd R31,Ra,UIMM */
890 /* Wwe know that the source register is 31 already, but
891 it can't hurt to compute it. */
892 ev_reg
= GET_SRC_REG (op
);
893 ev_offset
= ((op
>> 11) & 0x1f) * 8;
894 /* If this is the first vector reg to be saved, or if
895 it has a lower number than others previously seen,
896 reupdate the frame info. */
897 if (fdata
->saved_ev
== -1 || fdata
->saved_ev
> ev_reg
)
899 fdata
->saved_ev
= ev_reg
;
900 fdata
->ev_offset
= ev_offset
+ offset
;
905 /* Store gen register S at (r31+r0).
906 Store param on stack when offset from SP bigger than 4 bytes. */
907 /* 000100 sssss 11111 00000 01100100000 */
908 else if (arch_info
->mach
== bfd_mach_ppc_e500
909 && (op
& 0xfc1fffff) == 0x101f0320) /* evstddx Rs,R31,R0 */
911 if (pc
== (li_found_pc
+ 4))
913 if ((op
& 0x03e00000) >= 0x01a00000)
915 ev_reg
= GET_SRC_REG (op
);
916 /* If this is the first vector reg to be saved, or if
917 it has a lower number than others previously seen,
918 reupdate the frame info. */
919 /* We know the contents of r0 from the previous
921 if (fdata
->saved_ev
== -1 || fdata
->saved_ev
> ev_reg
)
923 fdata
->saved_ev
= ev_reg
;
924 fdata
->ev_offset
= vr_saved_offset
+ offset
;
928 vr_saved_offset
= -1;
933 /* End BookE related instructions. */
937 /* Not a recognized prologue instruction.
938 Handle optimizer code motions into the prologue by continuing
939 the search if we have no valid frame yet or if the return
940 address is not yet saved in the frame. */
941 if (fdata
->frameless
== 0
942 && (lr_reg
== -1 || fdata
->nosavedpc
== 0))
945 if (op
== 0x4e800020 /* blr */
946 || op
== 0x4e800420) /* bctr */
947 /* Do not scan past epilogue in frameless functions or
950 if ((op
& 0xf4000000) == 0x40000000) /* bxx */
951 /* Never skip branches. */
954 if (num_skip_non_prologue_insns
++ > max_skip_non_prologue_insns
)
955 /* Do not scan too many insns, scanning insns is expensive with
959 /* Continue scanning. */
960 prev_insn_was_prologue_insn
= 0;
966 /* I have problems with skipping over __main() that I need to address
967 * sometime. Previously, I used to use misc_function_vector which
968 * didn't work as well as I wanted to be. -MGO */
970 /* If the first thing after skipping a prolog is a branch to a function,
971 this might be a call to an initializer in main(), introduced by gcc2.
972 We'd like to skip over it as well. Fortunately, xlc does some extra
973 work before calling a function right after a prologue, thus we can
974 single out such gcc2 behaviour. */
977 if ((op
& 0xfc000001) == 0x48000001)
978 { /* bl foo, an initializer function? */
979 op
= read_memory_integer (pc
+ 4, 4);
981 if (op
== 0x4def7b82)
982 { /* cror 0xf, 0xf, 0xf (nop) */
984 /* Check and see if we are in main. If so, skip over this
985 initializer function as well. */
987 tmp
= find_pc_misc_function (pc
);
988 if (tmp
>= 0 && STREQ (misc_function_vector
[tmp
].name
, main_name ()))
994 fdata
->offset
= -fdata
->offset
;
995 return last_prologue_pc
;
999 /*************************************************************************
1000 Support for creating pushing a dummy frame into the stack, and popping
1002 *************************************************************************/
1005 /* Pop the innermost frame, go back to the caller. */
1008 rs6000_pop_frame (void)
1010 CORE_ADDR pc
, lr
, sp
, prev_sp
, addr
; /* %pc, %lr, %sp */
1011 struct rs6000_framedata fdata
;
1012 struct frame_info
*frame
= get_current_frame ();
1016 sp
= get_frame_base (frame
);
1018 if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (frame
),
1019 get_frame_base (frame
),
1020 get_frame_base (frame
)))
1022 generic_pop_dummy_frame ();
1023 flush_cached_frames ();
1027 /* Make sure that all registers are valid. */
1028 deprecated_read_register_bytes (0, NULL
, DEPRECATED_REGISTER_BYTES
);
1030 /* Figure out previous %pc value. If the function is frameless, it is
1031 still in the link register, otherwise walk the frames and retrieve the
1032 saved %pc value in the previous frame. */
1034 addr
= get_frame_func (frame
);
1035 (void) skip_prologue (addr
, get_frame_pc (frame
), &fdata
);
1037 wordsize
= gdbarch_tdep (current_gdbarch
)->wordsize
;
1038 if (fdata
.frameless
)
1041 prev_sp
= read_memory_addr (sp
, wordsize
);
1042 if (fdata
.lr_offset
== 0)
1043 lr
= read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
);
1045 lr
= read_memory_addr (prev_sp
+ fdata
.lr_offset
, wordsize
);
1047 /* reset %pc value. */
1048 write_register (PC_REGNUM
, lr
);
1050 /* reset register values if any was saved earlier. */
1052 if (fdata
.saved_gpr
!= -1)
1054 addr
= prev_sp
+ fdata
.gpr_offset
;
1055 for (ii
= fdata
.saved_gpr
; ii
<= 31; ++ii
)
1057 read_memory (addr
, &deprecated_registers
[REGISTER_BYTE (ii
)],
1063 if (fdata
.saved_fpr
!= -1)
1065 addr
= prev_sp
+ fdata
.fpr_offset
;
1066 for (ii
= fdata
.saved_fpr
; ii
<= 31; ++ii
)
1068 read_memory (addr
, &deprecated_registers
[REGISTER_BYTE (ii
+ FP0_REGNUM
)], 8);
1073 write_register (SP_REGNUM
, prev_sp
);
1074 target_store_registers (-1);
1075 flush_cached_frames ();
1078 /* All the ABI's require 16 byte alignment. */
1080 rs6000_frame_align (struct gdbarch
*gdbarch
, CORE_ADDR addr
)
1082 return (addr
& -16);
1085 /* Pass the arguments in either registers, or in the stack. In RS/6000,
1086 the first eight words of the argument list (that might be less than
1087 eight parameters if some parameters occupy more than one word) are
1088 passed in r3..r10 registers. float and double parameters are
1089 passed in fpr's, in addition to that. Rest of the parameters if any
1090 are passed in user stack. There might be cases in which half of the
1091 parameter is copied into registers, the other half is pushed into
1094 Stack must be aligned on 64-bit boundaries when synthesizing
1097 If the function is returning a structure, then the return address is passed
1098 in r3, then the first 7 words of the parameters can be passed in registers,
1099 starting from r4. */
1102 rs6000_push_dummy_call (struct gdbarch
*gdbarch
, CORE_ADDR func_addr
,
1103 struct regcache
*regcache
, CORE_ADDR bp_addr
,
1104 int nargs
, struct value
**args
, CORE_ADDR sp
,
1105 int struct_return
, CORE_ADDR struct_addr
)
1107 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1110 int argno
; /* current argument number */
1111 int argbytes
; /* current argument byte */
1112 char tmp_buffer
[50];
1113 int f_argno
= 0; /* current floating point argno */
1114 int wordsize
= gdbarch_tdep (current_gdbarch
)->wordsize
;
1116 struct value
*arg
= 0;
1121 /* The first eight words of ther arguments are passed in registers.
1122 Copy them appropriately. */
1125 /* If the function is returning a `struct', then the first word
1126 (which will be passed in r3) is used for struct return address.
1127 In that case we should advance one word and start from r4
1128 register to copy parameters. */
1131 regcache_raw_write_unsigned (regcache
, tdep
->ppc_gp0_regnum
+ 3,
1137 effectively indirect call... gcc does...
1139 return_val example( float, int);
1142 float in fp0, int in r3
1143 offset of stack on overflow 8/16
1144 for varargs, must go by type.
1146 float in r3&r4, int in r5
1147 offset of stack on overflow different
1149 return in r3 or f0. If no float, must study how gcc emulates floats;
1150 pay attention to arg promotion.
1151 User may have to cast\args to handle promotion correctly
1152 since gdb won't know if prototype supplied or not.
1155 for (argno
= 0, argbytes
= 0; argno
< nargs
&& ii
< 8; ++ii
)
1157 int reg_size
= REGISTER_RAW_SIZE (ii
+ 3);
1160 type
= check_typedef (VALUE_TYPE (arg
));
1161 len
= TYPE_LENGTH (type
);
1163 if (TYPE_CODE (type
) == TYPE_CODE_FLT
)
1166 /* Floating point arguments are passed in fpr's, as well as gpr's.
1167 There are 13 fpr's reserved for passing parameters. At this point
1168 there is no way we would run out of them. */
1172 "Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno
);
1174 memcpy (&deprecated_registers
[REGISTER_BYTE (FP0_REGNUM
+ 1 + f_argno
)],
1175 VALUE_CONTENTS (arg
),
1183 /* Argument takes more than one register. */
1184 while (argbytes
< len
)
1186 memset (&deprecated_registers
[REGISTER_BYTE (ii
+ 3)], 0,
1188 memcpy (&deprecated_registers
[REGISTER_BYTE (ii
+ 3)],
1189 ((char *) VALUE_CONTENTS (arg
)) + argbytes
,
1190 (len
- argbytes
) > reg_size
1191 ? reg_size
: len
- argbytes
);
1192 ++ii
, argbytes
+= reg_size
;
1195 goto ran_out_of_registers_for_arguments
;
1202 /* Argument can fit in one register. No problem. */
1203 int adj
= TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
? reg_size
- len
: 0;
1204 memset (&deprecated_registers
[REGISTER_BYTE (ii
+ 3)], 0, reg_size
);
1205 memcpy ((char *)&deprecated_registers
[REGISTER_BYTE (ii
+ 3)] + adj
,
1206 VALUE_CONTENTS (arg
), len
);
1211 ran_out_of_registers_for_arguments
:
1213 saved_sp
= read_sp ();
1215 /* Location for 8 parameters are always reserved. */
1218 /* Another six words for back chain, TOC register, link register, etc. */
1221 /* Stack pointer must be quadword aligned. */
1224 /* If there are more arguments, allocate space for them in
1225 the stack, then push them starting from the ninth one. */
1227 if ((argno
< nargs
) || argbytes
)
1233 space
+= ((len
- argbytes
+ 3) & -4);
1239 for (; jj
< nargs
; ++jj
)
1241 struct value
*val
= args
[jj
];
1242 space
+= ((TYPE_LENGTH (VALUE_TYPE (val
))) + 3) & -4;
1245 /* Add location required for the rest of the parameters. */
1246 space
= (space
+ 15) & -16;
1249 /* If the last argument copied into the registers didn't fit there
1250 completely, push the rest of it into stack. */
1254 write_memory (sp
+ 24 + (ii
* 4),
1255 ((char *) VALUE_CONTENTS (arg
)) + argbytes
,
1258 ii
+= ((len
- argbytes
+ 3) & -4) / 4;
1261 /* Push the rest of the arguments into stack. */
1262 for (; argno
< nargs
; ++argno
)
1266 type
= check_typedef (VALUE_TYPE (arg
));
1267 len
= TYPE_LENGTH (type
);
1270 /* Float types should be passed in fpr's, as well as in the
1272 if (TYPE_CODE (type
) == TYPE_CODE_FLT
&& f_argno
< 13)
1277 "Fatal Error: a floating point parameter #%d with a size > 8 is found!\n", argno
);
1279 memcpy (&deprecated_registers
[REGISTER_BYTE (FP0_REGNUM
+ 1 + f_argno
)],
1280 VALUE_CONTENTS (arg
),
1285 write_memory (sp
+ 24 + (ii
* 4), (char *) VALUE_CONTENTS (arg
), len
);
1286 ii
+= ((len
+ 3) & -4) / 4;
1290 /* set back chain properly */
1291 store_unsigned_integer (tmp_buffer
, 4, saved_sp
);
1292 write_memory (sp
, tmp_buffer
, 4);
1294 /* Set the stack pointer. According to the ABI, the SP is ment to
1295 be set _before_ the corresponding stack space is used. No need
1296 for that here though - the target has been completly stopped - it
1297 isn't possible for an exception handler to stomp on the stack. */
1298 regcache_raw_write_signed (regcache
, SP_REGNUM
, sp
);
1300 /* Point the inferior function call's return address at the dummy's
1302 regcache_raw_write_signed (regcache
, tdep
->ppc_lr_regnum
, bp_addr
);
1304 /* Set the TOC register, get the value from the objfile reader
1305 which, in turn, gets it from the VMAP table. */
1306 if (rs6000_find_toc_address_hook
!= NULL
)
1308 CORE_ADDR tocvalue
= (*rs6000_find_toc_address_hook
) (func_addr
);
1309 regcache_raw_write_signed (regcache
, tdep
->ppc_toc_regnum
, tocvalue
);
1312 target_store_registers (-1);
1316 /* Extract a function return value of type TYPE from raw register array
1317 REGBUF, and copy that return value into VALBUF in virtual format. */
1319 e500_extract_return_value (struct type
*valtype
, struct regcache
*regbuf
, void *valbuf
)
1322 int vallen
= TYPE_LENGTH (valtype
);
1323 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1325 if (TYPE_CODE (valtype
) == TYPE_CODE_ARRAY
1327 && TYPE_VECTOR (valtype
))
1329 regcache_raw_read (regbuf
, tdep
->ppc_ev0_regnum
+ 3, valbuf
);
1333 /* Return value is copied starting from r3. Note that r3 for us
1334 is a pseudo register. */
1336 int return_regnum
= tdep
->ppc_gp0_regnum
+ 3;
1337 int reg_size
= REGISTER_RAW_SIZE (return_regnum
);
1343 /* Compute where we will start storing the value from. */
1344 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
)
1346 if (vallen
<= reg_size
)
1347 offset
= reg_size
- vallen
;
1349 offset
= reg_size
+ (reg_size
- vallen
);
1352 /* How big does the local buffer need to be? */
1353 if (vallen
<= reg_size
)
1354 val_buffer
= alloca (reg_size
);
1356 val_buffer
= alloca (vallen
);
1358 /* Read all we need into our private buffer. We copy it in
1359 chunks that are as long as one register, never shorter, even
1360 if the value is smaller than the register. */
1361 while (copied
< vallen
)
1363 reg_part_size
= REGISTER_RAW_SIZE (return_regnum
+ i
);
1364 /* It is a pseudo/cooked register. */
1365 regcache_cooked_read (regbuf
, return_regnum
+ i
,
1366 val_buffer
+ copied
);
1367 copied
+= reg_part_size
;
1370 /* Put the stuff in the return buffer. */
1371 memcpy (valbuf
, val_buffer
+ offset
, vallen
);
1376 rs6000_extract_return_value (struct type
*valtype
, char *regbuf
, char *valbuf
)
1379 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1381 if (TYPE_CODE (valtype
) == TYPE_CODE_FLT
)
1386 /* floats and doubles are returned in fpr1. fpr's have a size of 8 bytes.
1387 We need to truncate the return value into float size (4 byte) if
1390 if (TYPE_LENGTH (valtype
) > 4) /* this is a double */
1392 ®buf
[REGISTER_BYTE (FP0_REGNUM
+ 1)],
1393 TYPE_LENGTH (valtype
));
1396 memcpy (&dd
, ®buf
[REGISTER_BYTE (FP0_REGNUM
+ 1)], 8);
1398 memcpy (valbuf
, &ff
, sizeof (float));
1401 else if (TYPE_CODE (valtype
) == TYPE_CODE_ARRAY
1402 && TYPE_LENGTH (valtype
) == 16
1403 && TYPE_VECTOR (valtype
))
1405 memcpy (valbuf
, regbuf
+ REGISTER_BYTE (tdep
->ppc_vr0_regnum
+ 2),
1406 TYPE_LENGTH (valtype
));
1410 /* return value is copied starting from r3. */
1411 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
1412 && TYPE_LENGTH (valtype
) < REGISTER_RAW_SIZE (3))
1413 offset
= REGISTER_RAW_SIZE (3) - TYPE_LENGTH (valtype
);
1416 regbuf
+ REGISTER_BYTE (3) + offset
,
1417 TYPE_LENGTH (valtype
));
1421 /* Return whether handle_inferior_event() should proceed through code
1422 starting at PC in function NAME when stepping.
1424 The AIX -bbigtoc linker option generates functions @FIX0, @FIX1, etc. to
1425 handle memory references that are too distant to fit in instructions
1426 generated by the compiler. For example, if 'foo' in the following
1431 is greater than 32767, the linker might replace the lwz with a branch to
1432 somewhere in @FIX1 that does the load in 2 instructions and then branches
1433 back to where execution should continue.
1435 GDB should silently step over @FIX code, just like AIX dbx does.
1436 Unfortunately, the linker uses the "b" instruction for the branches,
1437 meaning that the link register doesn't get set. Therefore, GDB's usual
1438 step_over_function() mechanism won't work.
1440 Instead, use the IN_SOLIB_RETURN_TRAMPOLINE and SKIP_TRAMPOLINE_CODE hooks
1441 in handle_inferior_event() to skip past @FIX code. */
1444 rs6000_in_solib_return_trampoline (CORE_ADDR pc
, char *name
)
1446 return name
&& !strncmp (name
, "@FIX", 4);
1449 /* Skip code that the user doesn't want to see when stepping:
1451 1. Indirect function calls use a piece of trampoline code to do context
1452 switching, i.e. to set the new TOC table. Skip such code if we are on
1453 its first instruction (as when we have single-stepped to here).
1455 2. Skip shared library trampoline code (which is different from
1456 indirect function call trampolines).
1458 3. Skip bigtoc fixup code.
1460 Result is desired PC to step until, or NULL if we are not in
1461 code that should be skipped. */
1464 rs6000_skip_trampoline_code (CORE_ADDR pc
)
1466 unsigned int ii
, op
;
1468 CORE_ADDR solib_target_pc
;
1469 struct minimal_symbol
*msymbol
;
1471 static unsigned trampoline_code
[] =
1473 0x800b0000, /* l r0,0x0(r11) */
1474 0x90410014, /* st r2,0x14(r1) */
1475 0x7c0903a6, /* mtctr r0 */
1476 0x804b0004, /* l r2,0x4(r11) */
1477 0x816b0008, /* l r11,0x8(r11) */
1478 0x4e800420, /* bctr */
1479 0x4e800020, /* br */
1483 /* Check for bigtoc fixup code. */
1484 msymbol
= lookup_minimal_symbol_by_pc (pc
);
1485 if (msymbol
&& rs6000_in_solib_return_trampoline (pc
, DEPRECATED_SYMBOL_NAME (msymbol
)))
1487 /* Double-check that the third instruction from PC is relative "b". */
1488 op
= read_memory_integer (pc
+ 8, 4);
1489 if ((op
& 0xfc000003) == 0x48000000)
1491 /* Extract bits 6-29 as a signed 24-bit relative word address and
1492 add it to the containing PC. */
1493 rel
= ((int)(op
<< 6) >> 6);
1494 return pc
+ 8 + rel
;
1498 /* If pc is in a shared library trampoline, return its target. */
1499 solib_target_pc
= find_solib_trampoline_target (pc
);
1500 if (solib_target_pc
)
1501 return solib_target_pc
;
1503 for (ii
= 0; trampoline_code
[ii
]; ++ii
)
1505 op
= read_memory_integer (pc
+ (ii
* 4), 4);
1506 if (op
!= trampoline_code
[ii
])
1509 ii
= read_register (11); /* r11 holds destination addr */
1510 pc
= read_memory_addr (ii
, gdbarch_tdep (current_gdbarch
)->wordsize
); /* (r11) value */
1514 /* Determines whether the function FI has a frame on the stack or not. */
1517 rs6000_frameless_function_invocation (struct frame_info
*fi
)
1519 CORE_ADDR func_start
;
1520 struct rs6000_framedata fdata
;
1522 /* Don't even think about framelessness except on the innermost frame
1523 or if the function was interrupted by a signal. */
1524 if (get_next_frame (fi
) != NULL
1525 && !(get_frame_type (get_next_frame (fi
)) == SIGTRAMP_FRAME
))
1528 func_start
= get_frame_func (fi
);
1530 /* If we failed to find the start of the function, it is a mistake
1531 to inspect the instructions. */
1535 /* A frame with a zero PC is usually created by dereferencing a NULL
1536 function pointer, normally causing an immediate core dump of the
1537 inferior. Mark function as frameless, as the inferior has no chance
1538 of setting up a stack frame. */
1539 if (get_frame_pc (fi
) == 0)
1545 (void) skip_prologue (func_start
, get_frame_pc (fi
), &fdata
);
1546 return fdata
.frameless
;
1549 /* Return the PC saved in a frame. */
1552 rs6000_frame_saved_pc (struct frame_info
*fi
)
1554 CORE_ADDR func_start
;
1555 struct rs6000_framedata fdata
;
1556 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1557 int wordsize
= tdep
->wordsize
;
1559 if ((get_frame_type (fi
) == SIGTRAMP_FRAME
))
1560 return read_memory_addr (get_frame_base (fi
) + SIG_FRAME_PC_OFFSET
,
1563 if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (fi
),
1564 get_frame_base (fi
),
1565 get_frame_base (fi
)))
1566 return deprecated_read_register_dummy (get_frame_pc (fi
),
1567 get_frame_base (fi
), PC_REGNUM
);
1569 func_start
= get_frame_func (fi
);
1571 /* If we failed to find the start of the function, it is a mistake
1572 to inspect the instructions. */
1576 (void) skip_prologue (func_start
, get_frame_pc (fi
), &fdata
);
1578 if (fdata
.lr_offset
== 0 && get_next_frame (fi
) != NULL
)
1580 if ((get_frame_type (get_next_frame (fi
)) == SIGTRAMP_FRAME
))
1581 return read_memory_addr ((get_frame_base (get_next_frame (fi
))
1582 + SIG_FRAME_LR_OFFSET
),
1584 else if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (get_next_frame (fi
)), 0, 0))
1585 /* The link register wasn't saved by this frame and the next
1586 (inner, newer) frame is a dummy. Get the link register
1587 value by unwinding it from that [dummy] frame. */
1590 frame_unwind_unsigned_register (get_next_frame (fi
),
1591 tdep
->ppc_lr_regnum
, &lr
);
1595 return read_memory_addr (DEPRECATED_FRAME_CHAIN (fi
)
1596 + tdep
->lr_frame_offset
,
1600 if (fdata
.lr_offset
== 0)
1601 return read_register (gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
);
1603 return read_memory_addr (DEPRECATED_FRAME_CHAIN (fi
) + fdata
.lr_offset
,
1607 /* If saved registers of frame FI are not known yet, read and cache them.
1608 &FDATAP contains rs6000_framedata; TDATAP can be NULL,
1609 in which case the framedata are read. */
1612 frame_get_saved_regs (struct frame_info
*fi
, struct rs6000_framedata
*fdatap
)
1614 CORE_ADDR frame_addr
;
1615 struct rs6000_framedata work_fdata
;
1616 struct gdbarch_tdep
* tdep
= gdbarch_tdep (current_gdbarch
);
1617 int wordsize
= tdep
->wordsize
;
1619 if (get_frame_saved_regs (fi
))
1624 fdatap
= &work_fdata
;
1625 (void) skip_prologue (get_frame_func (fi
), get_frame_pc (fi
), fdatap
);
1628 frame_saved_regs_zalloc (fi
);
1630 /* If there were any saved registers, figure out parent's stack
1632 /* The following is true only if the frame doesn't have a call to
1635 if (fdatap
->saved_fpr
== 0
1636 && fdatap
->saved_gpr
== 0
1637 && fdatap
->saved_vr
== 0
1638 && fdatap
->saved_ev
== 0
1639 && fdatap
->lr_offset
== 0
1640 && fdatap
->cr_offset
== 0
1641 && fdatap
->vr_offset
== 0
1642 && fdatap
->ev_offset
== 0)
1645 /* NOTE: cagney/2002-04-14: The ->frame points to the inner-most
1646 address of the current frame. Things might be easier if the
1647 ->frame pointed to the outer-most address of the frame. In the
1648 mean time, the address of the prev frame is used as the base
1649 address of this frame. */
1650 frame_addr
= DEPRECATED_FRAME_CHAIN (fi
);
1652 /* if != -1, fdatap->saved_fpr is the smallest number of saved_fpr.
1653 All fpr's from saved_fpr to fp31 are saved. */
1655 if (fdatap
->saved_fpr
>= 0)
1658 CORE_ADDR fpr_addr
= frame_addr
+ fdatap
->fpr_offset
;
1659 for (i
= fdatap
->saved_fpr
; i
< 32; i
++)
1661 get_frame_saved_regs (fi
)[FP0_REGNUM
+ i
] = fpr_addr
;
1666 /* if != -1, fdatap->saved_gpr is the smallest number of saved_gpr.
1667 All gpr's from saved_gpr to gpr31 are saved. */
1669 if (fdatap
->saved_gpr
>= 0)
1672 CORE_ADDR gpr_addr
= frame_addr
+ fdatap
->gpr_offset
;
1673 for (i
= fdatap
->saved_gpr
; i
< 32; i
++)
1675 get_frame_saved_regs (fi
)[tdep
->ppc_gp0_regnum
+ i
] = gpr_addr
;
1676 gpr_addr
+= wordsize
;
1680 /* if != -1, fdatap->saved_vr is the smallest number of saved_vr.
1681 All vr's from saved_vr to vr31 are saved. */
1682 if (tdep
->ppc_vr0_regnum
!= -1 && tdep
->ppc_vrsave_regnum
!= -1)
1684 if (fdatap
->saved_vr
>= 0)
1687 CORE_ADDR vr_addr
= frame_addr
+ fdatap
->vr_offset
;
1688 for (i
= fdatap
->saved_vr
; i
< 32; i
++)
1690 get_frame_saved_regs (fi
)[tdep
->ppc_vr0_regnum
+ i
] = vr_addr
;
1691 vr_addr
+= REGISTER_RAW_SIZE (tdep
->ppc_vr0_regnum
);
1696 /* if != -1, fdatap->saved_ev is the smallest number of saved_ev.
1697 All vr's from saved_ev to ev31 are saved. ????? */
1698 if (tdep
->ppc_ev0_regnum
!= -1 && tdep
->ppc_ev31_regnum
!= -1)
1700 if (fdatap
->saved_ev
>= 0)
1703 CORE_ADDR ev_addr
= frame_addr
+ fdatap
->ev_offset
;
1704 for (i
= fdatap
->saved_ev
; i
< 32; i
++)
1706 get_frame_saved_regs (fi
)[tdep
->ppc_ev0_regnum
+ i
] = ev_addr
;
1707 get_frame_saved_regs (fi
)[tdep
->ppc_gp0_regnum
+ i
] = ev_addr
+ 4;
1708 ev_addr
+= REGISTER_RAW_SIZE (tdep
->ppc_ev0_regnum
);
1713 /* If != 0, fdatap->cr_offset is the offset from the frame that holds
1715 if (fdatap
->cr_offset
!= 0)
1716 get_frame_saved_regs (fi
)[tdep
->ppc_cr_regnum
] = frame_addr
+ fdatap
->cr_offset
;
1718 /* If != 0, fdatap->lr_offset is the offset from the frame that holds
1720 if (fdatap
->lr_offset
!= 0)
1721 get_frame_saved_regs (fi
)[tdep
->ppc_lr_regnum
] = frame_addr
+ fdatap
->lr_offset
;
1723 /* If != 0, fdatap->vrsave_offset is the offset from the frame that holds
1725 if (fdatap
->vrsave_offset
!= 0)
1726 get_frame_saved_regs (fi
)[tdep
->ppc_vrsave_regnum
] = frame_addr
+ fdatap
->vrsave_offset
;
1729 /* Return the address of a frame. This is the inital %sp value when the frame
1730 was first allocated. For functions calling alloca(), it might be saved in
1731 an alloca register. */
1734 frame_initial_stack_address (struct frame_info
*fi
)
1737 struct rs6000_framedata fdata
;
1738 struct frame_info
*callee_fi
;
1740 /* If the initial stack pointer (frame address) of this frame is known,
1743 if (get_frame_extra_info (fi
)->initial_sp
)
1744 return get_frame_extra_info (fi
)->initial_sp
;
1746 /* Find out if this function is using an alloca register. */
1748 (void) skip_prologue (get_frame_func (fi
), get_frame_pc (fi
), &fdata
);
1750 /* If saved registers of this frame are not known yet, read and
1753 if (!get_frame_saved_regs (fi
))
1754 frame_get_saved_regs (fi
, &fdata
);
1756 /* If no alloca register used, then fi->frame is the value of the %sp for
1757 this frame, and it is good enough. */
1759 if (fdata
.alloca_reg
< 0)
1761 get_frame_extra_info (fi
)->initial_sp
= get_frame_base (fi
);
1762 return get_frame_extra_info (fi
)->initial_sp
;
1765 /* There is an alloca register, use its value, in the current frame,
1766 as the initial stack pointer. */
1768 char tmpbuf
[MAX_REGISTER_SIZE
];
1769 if (frame_register_read (fi
, fdata
.alloca_reg
, tmpbuf
))
1771 get_frame_extra_info (fi
)->initial_sp
1772 = extract_unsigned_integer (tmpbuf
,
1773 REGISTER_RAW_SIZE (fdata
.alloca_reg
));
1776 /* NOTE: cagney/2002-04-17: At present the only time
1777 frame_register_read will fail is when the register isn't
1778 available. If that does happen, use the frame. */
1779 get_frame_extra_info (fi
)->initial_sp
= get_frame_base (fi
);
1781 return get_frame_extra_info (fi
)->initial_sp
;
1784 /* Describe the pointer in each stack frame to the previous stack frame
1787 /* DEPRECATED_FRAME_CHAIN takes a frame's nominal address and produces
1788 the frame's chain-pointer. */
1790 /* In the case of the RS/6000, the frame's nominal address
1791 is the address of a 4-byte word containing the calling frame's address. */
1794 rs6000_frame_chain (struct frame_info
*thisframe
)
1796 CORE_ADDR fp
, fpp
, lr
;
1797 int wordsize
= gdbarch_tdep (current_gdbarch
)->wordsize
;
1799 if (DEPRECATED_PC_IN_CALL_DUMMY (get_frame_pc (thisframe
),
1800 get_frame_base (thisframe
),
1801 get_frame_base (thisframe
)))
1802 /* A dummy frame always correctly chains back to the previous
1804 return read_memory_addr (get_frame_base (thisframe
), wordsize
);
1806 if (deprecated_inside_entry_file (get_frame_pc (thisframe
))
1807 || get_frame_pc (thisframe
) == entry_point_address ())
1810 if ((get_frame_type (thisframe
) == SIGTRAMP_FRAME
))
1811 fp
= read_memory_addr (get_frame_base (thisframe
) + SIG_FRAME_FP_OFFSET
,
1813 else if (get_next_frame (thisframe
) != NULL
1814 && (get_frame_type (get_next_frame (thisframe
)) == SIGTRAMP_FRAME
)
1815 && FRAMELESS_FUNCTION_INVOCATION (thisframe
))
1816 /* A frameless function interrupted by a signal did not change the
1818 fp
= get_frame_base (thisframe
);
1820 fp
= read_memory_addr (get_frame_base (thisframe
), wordsize
);
1824 /* Return the size of register REG when words are WORDSIZE bytes long. If REG
1825 isn't available with that word size, return 0. */
1828 regsize (const struct reg
*reg
, int wordsize
)
1830 return wordsize
== 8 ? reg
->sz64
: reg
->sz32
;
1833 /* Return the name of register number N, or null if no such register exists
1834 in the current architecture. */
1837 rs6000_register_name (int n
)
1839 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1840 const struct reg
*reg
= tdep
->regs
+ n
;
1842 if (!regsize (reg
, tdep
->wordsize
))
1847 /* Index within `registers' of the first byte of the space for
1851 rs6000_register_byte (int n
)
1853 return gdbarch_tdep (current_gdbarch
)->regoff
[n
];
1856 /* Return the number of bytes of storage in the actual machine representation
1857 for register N if that register is available, else return 0. */
1860 rs6000_register_raw_size (int n
)
1862 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1863 const struct reg
*reg
= tdep
->regs
+ n
;
1864 return regsize (reg
, tdep
->wordsize
);
1867 /* Return the GDB type object for the "standard" data type
1868 of data in register N. */
1870 static struct type
*
1871 rs6000_register_virtual_type (int n
)
1873 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
1874 const struct reg
*reg
= tdep
->regs
+ n
;
1877 return builtin_type_double
;
1880 int size
= regsize (reg
, tdep
->wordsize
);
1884 return builtin_type_int0
;
1886 return builtin_type_int32
;
1888 if (tdep
->ppc_ev0_regnum
<= n
&& n
<= tdep
->ppc_ev31_regnum
)
1889 return builtin_type_vec64
;
1891 return builtin_type_int64
;
1894 return builtin_type_vec128
;
1897 internal_error (__FILE__
, __LINE__
, "Register %d size %d unknown",
1903 /* Return whether register N requires conversion when moving from raw format
1906 The register format for RS/6000 floating point registers is always
1907 double, we need a conversion if the memory format is float. */
1910 rs6000_register_convertible (int n
)
1912 const struct reg
*reg
= gdbarch_tdep (current_gdbarch
)->regs
+ n
;
1916 /* Convert data from raw format for register N in buffer FROM
1917 to virtual format with type TYPE in buffer TO. */
1920 rs6000_register_convert_to_virtual (int n
, struct type
*type
,
1921 char *from
, char *to
)
1923 if (TYPE_LENGTH (type
) != REGISTER_RAW_SIZE (n
))
1925 double val
= deprecated_extract_floating (from
, REGISTER_RAW_SIZE (n
));
1926 deprecated_store_floating (to
, TYPE_LENGTH (type
), val
);
1929 memcpy (to
, from
, REGISTER_RAW_SIZE (n
));
1932 /* Convert data from virtual format with type TYPE in buffer FROM
1933 to raw format for register N in buffer TO. */
1936 rs6000_register_convert_to_raw (struct type
*type
, int n
,
1937 const char *from
, char *to
)
1939 if (TYPE_LENGTH (type
) != REGISTER_RAW_SIZE (n
))
1941 double val
= deprecated_extract_floating (from
, TYPE_LENGTH (type
));
1942 deprecated_store_floating (to
, REGISTER_RAW_SIZE (n
), val
);
1945 memcpy (to
, from
, REGISTER_RAW_SIZE (n
));
1949 e500_pseudo_register_read (struct gdbarch
*gdbarch
, struct regcache
*regcache
,
1950 int reg_nr
, void *buffer
)
1954 char temp_buffer
[MAX_REGISTER_SIZE
];
1955 struct gdbarch_tdep
*tdep
= gdbarch_tdep (gdbarch
);
1957 if (reg_nr
>= tdep
->ppc_gp0_regnum
1958 && reg_nr
<= tdep
->ppc_gplast_regnum
)
1960 base_regnum
= reg_nr
- tdep
->ppc_gp0_regnum
+ tdep
->ppc_ev0_regnum
;
1962 /* Build the value in the provided buffer. */
1963 /* Read the raw register of which this one is the lower portion. */
1964 regcache_raw_read (regcache
, base_regnum
, temp_buffer
);
1965 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
)
1967 memcpy ((char *) buffer
, temp_buffer
+ offset
, 4);
1972 e500_pseudo_register_write (struct gdbarch
*gdbarch
, struct regcache
*regcache
,
1973 int reg_nr
, const void *buffer
)
1977 char temp_buffer
[MAX_REGISTER_SIZE
];
1978 struct gdbarch_tdep
*tdep
= gdbarch_tdep (gdbarch
);
1980 if (reg_nr
>= tdep
->ppc_gp0_regnum
1981 && reg_nr
<= tdep
->ppc_gplast_regnum
)
1983 base_regnum
= reg_nr
- tdep
->ppc_gp0_regnum
+ tdep
->ppc_ev0_regnum
;
1984 /* reg_nr is 32 bit here, and base_regnum is 64 bits. */
1985 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
)
1988 /* Let's read the value of the base register into a temporary
1989 buffer, so that overwriting the last four bytes with the new
1990 value of the pseudo will leave the upper 4 bytes unchanged. */
1991 regcache_raw_read (regcache
, base_regnum
, temp_buffer
);
1993 /* Write as an 8 byte quantity. */
1994 memcpy (temp_buffer
+ offset
, (char *) buffer
, 4);
1995 regcache_raw_write (regcache
, base_regnum
, temp_buffer
);
1999 /* Convert a dwarf2 register number to a gdb REGNUM. */
2001 e500_dwarf2_reg_to_regnum (int num
)
2004 if (0 <= num
&& num
<= 31)
2005 return num
+ gdbarch_tdep (current_gdbarch
)->ppc_gp0_regnum
;
2010 /* Convert a dbx stab register number (from `r' declaration) to a gdb
2013 rs6000_stab_reg_to_regnum (int num
)
2019 regnum
= gdbarch_tdep (current_gdbarch
)->ppc_mq_regnum
;
2022 regnum
= gdbarch_tdep (current_gdbarch
)->ppc_lr_regnum
;
2025 regnum
= gdbarch_tdep (current_gdbarch
)->ppc_ctr_regnum
;
2028 regnum
= gdbarch_tdep (current_gdbarch
)->ppc_xer_regnum
;
2037 /* Write into appropriate registers a function return value
2038 of type TYPE, given in virtual format. */
2040 e500_store_return_value (struct type
*type
, char *valbuf
)
2042 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
2044 /* Everything is returned in GPR3 and up. */
2047 int len
= TYPE_LENGTH (type
);
2048 while (copied
< len
)
2050 int regnum
= gdbarch_tdep (current_gdbarch
)->ppc_gp0_regnum
+ 3 + i
;
2051 int reg_size
= REGISTER_RAW_SIZE (regnum
);
2052 char *reg_val_buf
= alloca (reg_size
);
2054 memcpy (reg_val_buf
, valbuf
+ copied
, reg_size
);
2056 deprecated_write_register_gen (regnum
, reg_val_buf
);
2062 rs6000_store_return_value (struct type
*type
, char *valbuf
)
2064 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
2066 if (TYPE_CODE (type
) == TYPE_CODE_FLT
)
2068 /* Floating point values are returned starting from FPR1 and up.
2069 Say a double_double_double type could be returned in
2070 FPR1/FPR2/FPR3 triple. */
2072 deprecated_write_register_bytes (REGISTER_BYTE (FP0_REGNUM
+ 1), valbuf
,
2073 TYPE_LENGTH (type
));
2074 else if (TYPE_CODE (type
) == TYPE_CODE_ARRAY
)
2076 if (TYPE_LENGTH (type
) == 16
2077 && TYPE_VECTOR (type
))
2078 deprecated_write_register_bytes (REGISTER_BYTE (tdep
->ppc_vr0_regnum
+ 2),
2079 valbuf
, TYPE_LENGTH (type
));
2082 /* Everything else is returned in GPR3 and up. */
2083 deprecated_write_register_bytes (REGISTER_BYTE (gdbarch_tdep (current_gdbarch
)->ppc_gp0_regnum
+ 3),
2084 valbuf
, TYPE_LENGTH (type
));
2087 /* Extract from an array REGBUF containing the (raw) register state
2088 the address in which a function should return its structure value,
2089 as a CORE_ADDR (or an expression that can be used as one). */
2092 rs6000_extract_struct_value_address (struct regcache
*regcache
)
2094 /* FIXME: cagney/2002-09-26: PR gdb/724: When making an inferior
2095 function call GDB knows the address of the struct return value
2096 and hence, should not need to call this function. Unfortunately,
2097 the current call_function_by_hand() code only saves the most
2098 recent struct address leading to occasional calls. The code
2099 should instead maintain a stack of such addresses (in the dummy
2101 /* NOTE: cagney/2002-09-26: Return 0 which indicates that we've
2102 really got no idea where the return value is being stored. While
2103 r3, on function entry, contained the address it will have since
2104 been reused (scratch) and hence wouldn't be valid */
2108 /* Return whether PC is in a dummy function call.
2110 FIXME: This just checks for the end of the stack, which is broken
2111 for things like stepping through gcc nested function stubs. */
2114 rs6000_pc_in_call_dummy (CORE_ADDR pc
, CORE_ADDR sp
, CORE_ADDR fp
)
2116 return sp
< pc
&& pc
< fp
;
2119 /* Hook called when a new child process is started. */
2122 rs6000_create_inferior (int pid
)
2124 if (rs6000_set_host_arch_hook
)
2125 rs6000_set_host_arch_hook (pid
);
2128 /* Support for CONVERT_FROM_FUNC_PTR_ADDR(ADDR).
2130 Usually a function pointer's representation is simply the address
2131 of the function. On the RS/6000 however, a function pointer is
2132 represented by a pointer to a TOC entry. This TOC entry contains
2133 three words, the first word is the address of the function, the
2134 second word is the TOC pointer (r2), and the third word is the
2135 static chain value. Throughout GDB it is currently assumed that a
2136 function pointer contains the address of the function, which is not
2137 easy to fix. In addition, the conversion of a function address to
2138 a function pointer would require allocation of a TOC entry in the
2139 inferior's memory space, with all its drawbacks. To be able to
2140 call C++ virtual methods in the inferior (which are called via
2141 function pointers), find_function_addr uses this function to get the
2142 function address from a function pointer. */
2144 /* Return real function address if ADDR (a function pointer) is in the data
2145 space and is therefore a special function pointer. */
2148 rs6000_convert_from_func_ptr_addr (CORE_ADDR addr
)
2150 struct obj_section
*s
;
2152 s
= find_pc_section (addr
);
2153 if (s
&& s
->the_bfd_section
->flags
& SEC_CODE
)
2156 /* ADDR is in the data space, so it's a special function pointer. */
2157 return read_memory_addr (addr
, gdbarch_tdep (current_gdbarch
)->wordsize
);
2161 /* Handling the various POWER/PowerPC variants. */
2164 /* The arrays here called registers_MUMBLE hold information about available
2167 For each family of PPC variants, I've tried to isolate out the
2168 common registers and put them up front, so that as long as you get
2169 the general family right, GDB will correctly identify the registers
2170 common to that family. The common register sets are:
2172 For the 60x family: hid0 hid1 iabr dabr pir
2174 For the 505 and 860 family: eie eid nri
2176 For the 403 and 403GC: icdbdr esr dear evpr cdbcr tsr tcr pit tbhi
2177 tblo srr2 srr3 dbsr dbcr iac1 iac2 dac1 dac2 dccr iccr pbl1
2180 Most of these register groups aren't anything formal. I arrived at
2181 them by looking at the registers that occurred in more than one
2184 Note: kevinb/2002-04-30: Support for the fpscr register was added
2185 during April, 2002. Slot 70 is being used for PowerPC and slot 71
2186 for Power. For PowerPC, slot 70 was unused and was already in the
2187 PPC_UISA_SPRS which is ideally where fpscr should go. For Power,
2188 slot 70 was being used for "mq", so the next available slot (71)
2189 was chosen. It would have been nice to be able to make the
2190 register numbers the same across processor cores, but this wasn't
2191 possible without either 1) renumbering some registers for some
2192 processors or 2) assigning fpscr to a really high slot that's
2193 larger than any current register number. Doing (1) is bad because
2194 existing stubs would break. Doing (2) is undesirable because it
2195 would introduce a really large gap between fpscr and the rest of
2196 the registers for most processors. */
2198 /* Convenience macros for populating register arrays. */
2200 /* Within another macro, convert S to a string. */
2204 /* Return a struct reg defining register NAME that's 32 bits on 32-bit systems
2205 and 64 bits on 64-bit systems. */
2206 #define R(name) { STR(name), 4, 8, 0, 0 }
2208 /* Return a struct reg defining register NAME that's 32 bits on all
2210 #define R4(name) { STR(name), 4, 4, 0, 0 }
2212 /* Return a struct reg defining register NAME that's 64 bits on all
2214 #define R8(name) { STR(name), 8, 8, 0, 0 }
2216 /* Return a struct reg defining register NAME that's 128 bits on all
2218 #define R16(name) { STR(name), 16, 16, 0, 0 }
2220 /* Return a struct reg defining floating-point register NAME. */
2221 #define F(name) { STR(name), 8, 8, 1, 0 }
2223 /* Return a struct reg defining a pseudo register NAME. */
2224 #define P(name) { STR(name), 4, 8, 0, 1}
2226 /* Return a struct reg defining register NAME that's 32 bits on 32-bit
2227 systems and that doesn't exist on 64-bit systems. */
2228 #define R32(name) { STR(name), 4, 0, 0, 0 }
2230 /* Return a struct reg defining register NAME that's 64 bits on 64-bit
2231 systems and that doesn't exist on 32-bit systems. */
2232 #define R64(name) { STR(name), 0, 8, 0, 0 }
2234 /* Return a struct reg placeholder for a register that doesn't exist. */
2235 #define R0 { 0, 0, 0, 0, 0 }
2237 /* UISA registers common across all architectures, including POWER. */
2239 #define COMMON_UISA_REGS \
2240 /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \
2241 /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \
2242 /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \
2243 /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \
2244 /* 32 */ F(f0), F(f1), F(f2), F(f3), F(f4), F(f5), F(f6), F(f7), \
2245 /* 40 */ F(f8), F(f9), F(f10),F(f11),F(f12),F(f13),F(f14),F(f15), \
2246 /* 48 */ F(f16),F(f17),F(f18),F(f19),F(f20),F(f21),F(f22),F(f23), \
2247 /* 56 */ F(f24),F(f25),F(f26),F(f27),F(f28),F(f29),F(f30),F(f31), \
2248 /* 64 */ R(pc), R(ps)
2250 #define COMMON_UISA_NOFP_REGS \
2251 /* 0 */ R(r0), R(r1), R(r2), R(r3), R(r4), R(r5), R(r6), R(r7), \
2252 /* 8 */ R(r8), R(r9), R(r10),R(r11),R(r12),R(r13),R(r14),R(r15), \
2253 /* 16 */ R(r16),R(r17),R(r18),R(r19),R(r20),R(r21),R(r22),R(r23), \
2254 /* 24 */ R(r24),R(r25),R(r26),R(r27),R(r28),R(r29),R(r30),R(r31), \
2255 /* 32 */ R0, R0, R0, R0, R0, R0, R0, R0, \
2256 /* 40 */ R0, R0, R0, R0, R0, R0, R0, R0, \
2257 /* 48 */ R0, R0, R0, R0, R0, R0, R0, R0, \
2258 /* 56 */ R0, R0, R0, R0, R0, R0, R0, R0, \
2259 /* 64 */ R(pc), R(ps)
2261 /* UISA-level SPRs for PowerPC. */
2262 #define PPC_UISA_SPRS \
2263 /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R4(fpscr)
2265 /* UISA-level SPRs for PowerPC without floating point support. */
2266 #define PPC_UISA_NOFP_SPRS \
2267 /* 66 */ R4(cr), R(lr), R(ctr), R4(xer), R0
2269 /* Segment registers, for PowerPC. */
2270 #define PPC_SEGMENT_REGS \
2271 /* 71 */ R32(sr0), R32(sr1), R32(sr2), R32(sr3), \
2272 /* 75 */ R32(sr4), R32(sr5), R32(sr6), R32(sr7), \
2273 /* 79 */ R32(sr8), R32(sr9), R32(sr10), R32(sr11), \
2274 /* 83 */ R32(sr12), R32(sr13), R32(sr14), R32(sr15)
2276 /* OEA SPRs for PowerPC. */
2277 #define PPC_OEA_SPRS \
2279 /* 88 */ R(ibat0u), R(ibat0l), R(ibat1u), R(ibat1l), \
2280 /* 92 */ R(ibat2u), R(ibat2l), R(ibat3u), R(ibat3l), \
2281 /* 96 */ R(dbat0u), R(dbat0l), R(dbat1u), R(dbat1l), \
2282 /* 100 */ R(dbat2u), R(dbat2l), R(dbat3u), R(dbat3l), \
2283 /* 104 */ R(sdr1), R64(asr), R(dar), R4(dsisr), \
2284 /* 108 */ R(sprg0), R(sprg1), R(sprg2), R(sprg3), \
2285 /* 112 */ R(srr0), R(srr1), R(tbl), R(tbu), \
2286 /* 116 */ R4(dec), R(dabr), R4(ear)
2288 /* AltiVec registers. */
2289 #define PPC_ALTIVEC_REGS \
2290 /*119*/R16(vr0), R16(vr1), R16(vr2), R16(vr3), R16(vr4), R16(vr5), R16(vr6), R16(vr7), \
2291 /*127*/R16(vr8), R16(vr9), R16(vr10),R16(vr11),R16(vr12),R16(vr13),R16(vr14),R16(vr15), \
2292 /*135*/R16(vr16),R16(vr17),R16(vr18),R16(vr19),R16(vr20),R16(vr21),R16(vr22),R16(vr23), \
2293 /*143*/R16(vr24),R16(vr25),R16(vr26),R16(vr27),R16(vr28),R16(vr29),R16(vr30),R16(vr31), \
2294 /*151*/R4(vscr), R4(vrsave)
2296 /* Vectors of hi-lo general purpose registers. */
2297 #define PPC_EV_REGS \
2298 /* 0*/R8(ev0), R8(ev1), R8(ev2), R8(ev3), R8(ev4), R8(ev5), R8(ev6), R8(ev7), \
2299 /* 8*/R8(ev8), R8(ev9), R8(ev10),R8(ev11),R8(ev12),R8(ev13),R8(ev14),R8(ev15), \
2300 /*16*/R8(ev16),R8(ev17),R8(ev18),R8(ev19),R8(ev20),R8(ev21),R8(ev22),R8(ev23), \
2301 /*24*/R8(ev24),R8(ev25),R8(ev26),R8(ev27),R8(ev28),R8(ev29),R8(ev30),R8(ev31)
2303 /* Lower half of the EV registers. */
2304 #define PPC_GPRS_PSEUDO_REGS \
2305 /* 0 */ P(r0), P(r1), P(r2), P(r3), P(r4), P(r5), P(r6), P(r7), \
2306 /* 8 */ P(r8), P(r9), P(r10),P(r11),P(r12),P(r13),P(r14),P(r15), \
2307 /* 16 */ P(r16),P(r17),P(r18),P(r19),P(r20),P(r21),P(r22),P(r23), \
2308 /* 24 */ P(r24),P(r25),P(r26),P(r27),P(r28),P(r29),P(r30),P(r31)
2310 /* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover
2311 user-level SPR's. */
2312 static const struct reg registers_power
[] =
2315 /* 66 */ R4(cnd
), R(lr
), R(cnt
), R4(xer
), R4(mq
),
2319 /* PowerPC UISA - a PPC processor as viewed by user-level code. A UISA-only
2320 view of the PowerPC. */
2321 static const struct reg registers_powerpc
[] =
2328 /* PowerPC UISA - a PPC processor as viewed by user-level
2329 code, but without floating point registers. */
2330 static const struct reg registers_powerpc_nofp
[] =
2332 COMMON_UISA_NOFP_REGS
,
2336 /* IBM PowerPC 403. */
2337 static const struct reg registers_403
[] =
2343 /* 119 */ R(icdbdr
), R(esr
), R(dear
), R(evpr
),
2344 /* 123 */ R(cdbcr
), R(tsr
), R(tcr
), R(pit
),
2345 /* 127 */ R(tbhi
), R(tblo
), R(srr2
), R(srr3
),
2346 /* 131 */ R(dbsr
), R(dbcr
), R(iac1
), R(iac2
),
2347 /* 135 */ R(dac1
), R(dac2
), R(dccr
), R(iccr
),
2348 /* 139 */ R(pbl1
), R(pbu1
), R(pbl2
), R(pbu2
)
2351 /* IBM PowerPC 403GC. */
2352 static const struct reg registers_403GC
[] =
2358 /* 119 */ R(icdbdr
), R(esr
), R(dear
), R(evpr
),
2359 /* 123 */ R(cdbcr
), R(tsr
), R(tcr
), R(pit
),
2360 /* 127 */ R(tbhi
), R(tblo
), R(srr2
), R(srr3
),
2361 /* 131 */ R(dbsr
), R(dbcr
), R(iac1
), R(iac2
),
2362 /* 135 */ R(dac1
), R(dac2
), R(dccr
), R(iccr
),
2363 /* 139 */ R(pbl1
), R(pbu1
), R(pbl2
), R(pbu2
),
2364 /* 143 */ R(zpr
), R(pid
), R(sgr
), R(dcwr
),
2365 /* 147 */ R(tbhu
), R(tblu
)
2368 /* Motorola PowerPC 505. */
2369 static const struct reg registers_505
[] =
2375 /* 119 */ R(eie
), R(eid
), R(nri
)
2378 /* Motorola PowerPC 860 or 850. */
2379 static const struct reg registers_860
[] =
2385 /* 119 */ R(eie
), R(eid
), R(nri
), R(cmpa
),
2386 /* 123 */ R(cmpb
), R(cmpc
), R(cmpd
), R(icr
),
2387 /* 127 */ R(der
), R(counta
), R(countb
), R(cmpe
),
2388 /* 131 */ R(cmpf
), R(cmpg
), R(cmph
), R(lctrl1
),
2389 /* 135 */ R(lctrl2
), R(ictrl
), R(bar
), R(ic_cst
),
2390 /* 139 */ R(ic_adr
), R(ic_dat
), R(dc_cst
), R(dc_adr
),
2391 /* 143 */ R(dc_dat
), R(dpdr
), R(dpir
), R(immr
),
2392 /* 147 */ R(mi_ctr
), R(mi_ap
), R(mi_epn
), R(mi_twc
),
2393 /* 151 */ R(mi_rpn
), R(md_ctr
), R(m_casid
), R(md_ap
),
2394 /* 155 */ R(md_epn
), R(md_twb
), R(md_twc
), R(md_rpn
),
2395 /* 159 */ R(m_tw
), R(mi_dbcam
), R(mi_dbram0
), R(mi_dbram1
),
2396 /* 163 */ R(md_dbcam
), R(md_dbram0
), R(md_dbram1
)
2399 /* Motorola PowerPC 601. Note that the 601 has different register numbers
2400 for reading and writing RTCU and RTCL. However, how one reads and writes a
2401 register is the stub's problem. */
2402 static const struct reg registers_601
[] =
2408 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R(dabr
),
2409 /* 123 */ R(pir
), R(mq
), R(rtcu
), R(rtcl
)
2412 /* Motorola PowerPC 602. */
2413 static const struct reg registers_602
[] =
2419 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R0
,
2420 /* 123 */ R0
, R(tcr
), R(ibr
), R(esassr
),
2421 /* 127 */ R(sebr
), R(ser
), R(sp
), R(lt
)
2424 /* Motorola/IBM PowerPC 603 or 603e. */
2425 static const struct reg registers_603
[] =
2431 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R0
,
2432 /* 123 */ R0
, R(dmiss
), R(dcmp
), R(hash1
),
2433 /* 127 */ R(hash2
), R(imiss
), R(icmp
), R(rpa
)
2436 /* Motorola PowerPC 604 or 604e. */
2437 static const struct reg registers_604
[] =
2443 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R(dabr
),
2444 /* 123 */ R(pir
), R(mmcr0
), R(pmc1
), R(pmc2
),
2445 /* 127 */ R(sia
), R(sda
)
2448 /* Motorola/IBM PowerPC 750 or 740. */
2449 static const struct reg registers_750
[] =
2455 /* 119 */ R(hid0
), R(hid1
), R(iabr
), R(dabr
),
2456 /* 123 */ R0
, R(ummcr0
), R(upmc1
), R(upmc2
),
2457 /* 127 */ R(usia
), R(ummcr1
), R(upmc3
), R(upmc4
),
2458 /* 131 */ R(mmcr0
), R(pmc1
), R(pmc2
), R(sia
),
2459 /* 135 */ R(mmcr1
), R(pmc3
), R(pmc4
), R(l2cr
),
2460 /* 139 */ R(ictc
), R(thrm1
), R(thrm2
), R(thrm3
)
2464 /* Motorola PowerPC 7400. */
2465 static const struct reg registers_7400
[] =
2467 /* gpr0-gpr31, fpr0-fpr31 */
2469 /* ctr, xre, lr, cr */
2474 /* vr0-vr31, vrsave, vscr */
2476 /* FIXME? Add more registers? */
2479 /* Motorola e500. */
2480 static const struct reg registers_e500
[] =
2483 /* cr, lr, ctr, xer, "" */
2487 R8(acc
), R(spefscr
),
2488 /* NOTE: Add new registers here the end of the raw register
2489 list and just before the first pseudo register. */
2491 PPC_GPRS_PSEUDO_REGS
2494 /* Information about a particular processor variant. */
2498 /* Name of this variant. */
2501 /* English description of the variant. */
2504 /* bfd_arch_info.arch corresponding to variant. */
2505 enum bfd_architecture arch
;
2507 /* bfd_arch_info.mach corresponding to variant. */
2510 /* Number of real registers. */
2513 /* Number of pseudo registers. */
2516 /* Number of total registers (the sum of nregs and npregs). */
2519 /* Table of register names; registers[R] is the name of the register
2521 const struct reg
*regs
;
2524 #define tot_num_registers(list) (sizeof (list) / sizeof((list)[0]))
2527 num_registers (const struct reg
*reg_list
, int num_tot_regs
)
2532 for (i
= 0; i
< num_tot_regs
; i
++)
2533 if (!reg_list
[i
].pseudo
)
2540 num_pseudo_registers (const struct reg
*reg_list
, int num_tot_regs
)
2545 for (i
= 0; i
< num_tot_regs
; i
++)
2546 if (reg_list
[i
].pseudo
)
2552 /* Information in this table comes from the following web sites:
2553 IBM: http://www.chips.ibm.com:80/products/embedded/
2554 Motorola: http://www.mot.com/SPS/PowerPC/
2556 I'm sure I've got some of the variant descriptions not quite right.
2557 Please report any inaccuracies you find to GDB's maintainer.
2559 If you add entries to this table, please be sure to allow the new
2560 value as an argument to the --with-cpu flag, in configure.in. */
2562 static struct variant variants
[] =
2565 {"powerpc", "PowerPC user-level", bfd_arch_powerpc
,
2566 bfd_mach_ppc
, -1, -1, tot_num_registers (registers_powerpc
),
2568 {"power", "POWER user-level", bfd_arch_rs6000
,
2569 bfd_mach_rs6k
, -1, -1, tot_num_registers (registers_power
),
2571 {"403", "IBM PowerPC 403", bfd_arch_powerpc
,
2572 bfd_mach_ppc_403
, -1, -1, tot_num_registers (registers_403
),
2574 {"601", "Motorola PowerPC 601", bfd_arch_powerpc
,
2575 bfd_mach_ppc_601
, -1, -1, tot_num_registers (registers_601
),
2577 {"602", "Motorola PowerPC 602", bfd_arch_powerpc
,
2578 bfd_mach_ppc_602
, -1, -1, tot_num_registers (registers_602
),
2580 {"603", "Motorola/IBM PowerPC 603 or 603e", bfd_arch_powerpc
,
2581 bfd_mach_ppc_603
, -1, -1, tot_num_registers (registers_603
),
2583 {"604", "Motorola PowerPC 604 or 604e", bfd_arch_powerpc
,
2584 604, -1, -1, tot_num_registers (registers_604
),
2586 {"403GC", "IBM PowerPC 403GC", bfd_arch_powerpc
,
2587 bfd_mach_ppc_403gc
, -1, -1, tot_num_registers (registers_403GC
),
2589 {"505", "Motorola PowerPC 505", bfd_arch_powerpc
,
2590 bfd_mach_ppc_505
, -1, -1, tot_num_registers (registers_505
),
2592 {"860", "Motorola PowerPC 860 or 850", bfd_arch_powerpc
,
2593 bfd_mach_ppc_860
, -1, -1, tot_num_registers (registers_860
),
2595 {"750", "Motorola/IBM PowerPC 750 or 740", bfd_arch_powerpc
,
2596 bfd_mach_ppc_750
, -1, -1, tot_num_registers (registers_750
),
2598 {"7400", "Motorola/IBM PowerPC 7400 (G4)", bfd_arch_powerpc
,
2599 bfd_mach_ppc_7400
, -1, -1, tot_num_registers (registers_7400
),
2601 {"e500", "Motorola PowerPC e500", bfd_arch_powerpc
,
2602 bfd_mach_ppc_e500
, -1, -1, tot_num_registers (registers_e500
),
2606 {"powerpc64", "PowerPC 64-bit user-level", bfd_arch_powerpc
,
2607 bfd_mach_ppc64
, -1, -1, tot_num_registers (registers_powerpc
),
2609 {"620", "Motorola PowerPC 620", bfd_arch_powerpc
,
2610 bfd_mach_ppc_620
, -1, -1, tot_num_registers (registers_powerpc
),
2612 {"630", "Motorola PowerPC 630", bfd_arch_powerpc
,
2613 bfd_mach_ppc_630
, -1, -1, tot_num_registers (registers_powerpc
),
2615 {"a35", "PowerPC A35", bfd_arch_powerpc
,
2616 bfd_mach_ppc_a35
, -1, -1, tot_num_registers (registers_powerpc
),
2618 {"rs64ii", "PowerPC rs64ii", bfd_arch_powerpc
,
2619 bfd_mach_ppc_rs64ii
, -1, -1, tot_num_registers (registers_powerpc
),
2621 {"rs64iii", "PowerPC rs64iii", bfd_arch_powerpc
,
2622 bfd_mach_ppc_rs64iii
, -1, -1, tot_num_registers (registers_powerpc
),
2625 /* FIXME: I haven't checked the register sets of the following. */
2626 {"rs1", "IBM POWER RS1", bfd_arch_rs6000
,
2627 bfd_mach_rs6k_rs1
, -1, -1, tot_num_registers (registers_power
),
2629 {"rsc", "IBM POWER RSC", bfd_arch_rs6000
,
2630 bfd_mach_rs6k_rsc
, -1, -1, tot_num_registers (registers_power
),
2632 {"rs2", "IBM POWER RS2", bfd_arch_rs6000
,
2633 bfd_mach_rs6k_rs2
, -1, -1, tot_num_registers (registers_power
),
2636 {0, 0, 0, 0, 0, 0, 0, 0}
2639 /* Initialize the number of registers and pseudo registers in each variant. */
2642 init_variants (void)
2646 for (v
= variants
; v
->name
; v
++)
2649 v
->nregs
= num_registers (v
->regs
, v
->num_tot_regs
);
2650 if (v
->npregs
== -1)
2651 v
->npregs
= num_pseudo_registers (v
->regs
, v
->num_tot_regs
);
2655 /* Return the variant corresponding to architecture ARCH and machine number
2656 MACH. If no such variant exists, return null. */
2658 static const struct variant
*
2659 find_variant_by_arch (enum bfd_architecture arch
, unsigned long mach
)
2661 const struct variant
*v
;
2663 for (v
= variants
; v
->name
; v
++)
2664 if (arch
== v
->arch
&& mach
== v
->mach
)
2671 gdb_print_insn_powerpc (bfd_vma memaddr
, disassemble_info
*info
)
2673 if (TARGET_BYTE_ORDER
== BFD_ENDIAN_BIG
)
2674 return print_insn_big_powerpc (memaddr
, info
);
2676 return print_insn_little_powerpc (memaddr
, info
);
2679 /* Initialize the current architecture based on INFO. If possible, re-use an
2680 architecture from ARCHES, which is a list of architectures already created
2681 during this debugging session.
2683 Called e.g. at program startup, when reading a core file, and when reading
2686 static struct gdbarch
*
2687 rs6000_gdbarch_init (struct gdbarch_info info
, struct gdbarch_list
*arches
)
2689 struct gdbarch
*gdbarch
;
2690 struct gdbarch_tdep
*tdep
;
2691 int wordsize
, from_xcoff_exec
, from_elf_exec
, power
, i
, off
;
2693 const struct variant
*v
;
2694 enum bfd_architecture arch
;
2700 from_xcoff_exec
= info
.abfd
&& info
.abfd
->format
== bfd_object
&&
2701 bfd_get_flavour (info
.abfd
) == bfd_target_xcoff_flavour
;
2703 from_elf_exec
= info
.abfd
&& info
.abfd
->format
== bfd_object
&&
2704 bfd_get_flavour (info
.abfd
) == bfd_target_elf_flavour
;
2706 sysv_abi
= info
.abfd
&& bfd_get_flavour (info
.abfd
) == bfd_target_elf_flavour
;
2708 /* Check word size. If INFO is from a binary file, infer it from
2709 that, else choose a likely default. */
2710 if (from_xcoff_exec
)
2712 if (bfd_xcoff_is_xcoff64 (info
.abfd
))
2717 else if (from_elf_exec
)
2719 if (elf_elfheader (info
.abfd
)->e_ident
[EI_CLASS
] == ELFCLASS64
)
2726 if (info
.bfd_arch_info
!= NULL
&& info
.bfd_arch_info
->bits_per_word
!= 0)
2727 wordsize
= info
.bfd_arch_info
->bits_per_word
/
2728 info
.bfd_arch_info
->bits_per_byte
;
2733 /* Find a candidate among extant architectures. */
2734 for (arches
= gdbarch_list_lookup_by_info (arches
, &info
);
2736 arches
= gdbarch_list_lookup_by_info (arches
->next
, &info
))
2738 /* Word size in the various PowerPC bfd_arch_info structs isn't
2739 meaningful, because 64-bit CPUs can run in 32-bit mode. So, perform
2740 separate word size check. */
2741 tdep
= gdbarch_tdep (arches
->gdbarch
);
2742 if (tdep
&& tdep
->wordsize
== wordsize
)
2743 return arches
->gdbarch
;
2746 /* None found, create a new architecture from INFO, whose bfd_arch_info
2747 validity depends on the source:
2748 - executable useless
2749 - rs6000_host_arch() good
2751 - "set arch" trust blindly
2752 - GDB startup useless but harmless */
2754 if (!from_xcoff_exec
)
2756 arch
= info
.bfd_arch_info
->arch
;
2757 mach
= info
.bfd_arch_info
->mach
;
2761 arch
= bfd_arch_powerpc
;
2762 bfd_default_set_arch_mach (&abfd
, arch
, 0);
2763 info
.bfd_arch_info
= bfd_get_arch_info (&abfd
);
2764 mach
= info
.bfd_arch_info
->mach
;
2766 tdep
= xmalloc (sizeof (struct gdbarch_tdep
));
2767 tdep
->wordsize
= wordsize
;
2769 /* For e500 executables, the apuinfo section is of help here. Such
2770 section contains the identifier and revision number of each
2771 Application-specific Processing Unit that is present on the
2772 chip. The content of the section is determined by the assembler
2773 which looks at each instruction and determines which unit (and
2774 which version of it) can execute it. In our case we just look for
2775 the existance of the section. */
2779 sect
= bfd_get_section_by_name (info
.abfd
, ".PPC.EMB.apuinfo");
2782 arch
= info
.bfd_arch_info
->arch
;
2783 mach
= bfd_mach_ppc_e500
;
2784 bfd_default_set_arch_mach (&abfd
, arch
, mach
);
2785 info
.bfd_arch_info
= bfd_get_arch_info (&abfd
);
2789 gdbarch
= gdbarch_alloc (&info
, tdep
);
2790 power
= arch
== bfd_arch_rs6000
;
2792 /* Initialize the number of real and pseudo registers in each variant. */
2795 /* Choose variant. */
2796 v
= find_variant_by_arch (arch
, mach
);
2800 tdep
->regs
= v
->regs
;
2802 tdep
->ppc_gp0_regnum
= 0;
2803 tdep
->ppc_gplast_regnum
= 31;
2804 tdep
->ppc_toc_regnum
= 2;
2805 tdep
->ppc_ps_regnum
= 65;
2806 tdep
->ppc_cr_regnum
= 66;
2807 tdep
->ppc_lr_regnum
= 67;
2808 tdep
->ppc_ctr_regnum
= 68;
2809 tdep
->ppc_xer_regnum
= 69;
2810 if (v
->mach
== bfd_mach_ppc_601
)
2811 tdep
->ppc_mq_regnum
= 124;
2813 tdep
->ppc_mq_regnum
= 70;
2815 tdep
->ppc_mq_regnum
= -1;
2816 tdep
->ppc_fpscr_regnum
= power
? 71 : 70;
2818 set_gdbarch_pc_regnum (gdbarch
, 64);
2819 set_gdbarch_sp_regnum (gdbarch
, 1);
2820 set_gdbarch_deprecated_fp_regnum (gdbarch
, 1);
2821 set_gdbarch_deprecated_extract_return_value (gdbarch
,
2822 rs6000_extract_return_value
);
2823 set_gdbarch_deprecated_store_return_value (gdbarch
, rs6000_store_return_value
);
2825 if (v
->arch
== bfd_arch_powerpc
)
2829 tdep
->ppc_vr0_regnum
= 71;
2830 tdep
->ppc_vrsave_regnum
= 104;
2831 tdep
->ppc_ev0_regnum
= -1;
2832 tdep
->ppc_ev31_regnum
= -1;
2834 case bfd_mach_ppc_7400
:
2835 tdep
->ppc_vr0_regnum
= 119;
2836 tdep
->ppc_vrsave_regnum
= 152;
2837 tdep
->ppc_ev0_regnum
= -1;
2838 tdep
->ppc_ev31_regnum
= -1;
2840 case bfd_mach_ppc_e500
:
2841 tdep
->ppc_gp0_regnum
= 41;
2842 tdep
->ppc_gplast_regnum
= tdep
->ppc_gp0_regnum
+ 32 - 1;
2843 tdep
->ppc_toc_regnum
= -1;
2844 tdep
->ppc_ps_regnum
= 1;
2845 tdep
->ppc_cr_regnum
= 2;
2846 tdep
->ppc_lr_regnum
= 3;
2847 tdep
->ppc_ctr_regnum
= 4;
2848 tdep
->ppc_xer_regnum
= 5;
2849 tdep
->ppc_ev0_regnum
= 7;
2850 tdep
->ppc_ev31_regnum
= 38;
2851 set_gdbarch_pc_regnum (gdbarch
, 0);
2852 set_gdbarch_sp_regnum (gdbarch
, tdep
->ppc_gp0_regnum
+ 1);
2853 set_gdbarch_deprecated_fp_regnum (gdbarch
, tdep
->ppc_gp0_regnum
+ 1);
2854 set_gdbarch_dwarf2_reg_to_regnum (gdbarch
, e500_dwarf2_reg_to_regnum
);
2855 set_gdbarch_pseudo_register_read (gdbarch
, e500_pseudo_register_read
);
2856 set_gdbarch_pseudo_register_write (gdbarch
, e500_pseudo_register_write
);
2857 set_gdbarch_extract_return_value (gdbarch
, e500_extract_return_value
);
2858 set_gdbarch_deprecated_store_return_value (gdbarch
, e500_store_return_value
);
2861 tdep
->ppc_vr0_regnum
= -1;
2862 tdep
->ppc_vrsave_regnum
= -1;
2863 tdep
->ppc_ev0_regnum
= -1;
2864 tdep
->ppc_ev31_regnum
= -1;
2868 /* Sanity check on registers. */
2869 gdb_assert (strcmp (tdep
->regs
[tdep
->ppc_gp0_regnum
].name
, "r0") == 0);
2871 /* Set lr_frame_offset. */
2873 tdep
->lr_frame_offset
= 16;
2875 tdep
->lr_frame_offset
= 4;
2877 tdep
->lr_frame_offset
= 8;
2879 /* Calculate byte offsets in raw register array. */
2880 tdep
->regoff
= xmalloc (v
->num_tot_regs
* sizeof (int));
2881 for (i
= off
= 0; i
< v
->num_tot_regs
; i
++)
2883 tdep
->regoff
[i
] = off
;
2884 off
+= regsize (v
->regs
+ i
, wordsize
);
2887 /* Select instruction printer. */
2889 set_gdbarch_print_insn (gdbarch
, print_insn_rs6000
);
2891 set_gdbarch_print_insn (gdbarch
, gdb_print_insn_powerpc
);
2893 set_gdbarch_write_pc (gdbarch
, generic_target_write_pc
);
2895 set_gdbarch_num_regs (gdbarch
, v
->nregs
);
2896 set_gdbarch_num_pseudo_regs (gdbarch
, v
->npregs
);
2897 set_gdbarch_register_name (gdbarch
, rs6000_register_name
);
2898 set_gdbarch_deprecated_register_size (gdbarch
, wordsize
);
2899 set_gdbarch_deprecated_register_bytes (gdbarch
, off
);
2900 set_gdbarch_deprecated_register_byte (gdbarch
, rs6000_register_byte
);
2901 set_gdbarch_deprecated_register_raw_size (gdbarch
, rs6000_register_raw_size
);
2902 set_gdbarch_deprecated_register_virtual_type (gdbarch
, rs6000_register_virtual_type
);
2904 set_gdbarch_ptr_bit (gdbarch
, wordsize
* TARGET_CHAR_BIT
);
2905 set_gdbarch_short_bit (gdbarch
, 2 * TARGET_CHAR_BIT
);
2906 set_gdbarch_int_bit (gdbarch
, 4 * TARGET_CHAR_BIT
);
2907 set_gdbarch_long_bit (gdbarch
, wordsize
* TARGET_CHAR_BIT
);
2908 set_gdbarch_long_long_bit (gdbarch
, 8 * TARGET_CHAR_BIT
);
2909 set_gdbarch_float_bit (gdbarch
, 4 * TARGET_CHAR_BIT
);
2910 set_gdbarch_double_bit (gdbarch
, 8 * TARGET_CHAR_BIT
);
2912 set_gdbarch_long_double_bit (gdbarch
, 16 * TARGET_CHAR_BIT
);
2914 set_gdbarch_long_double_bit (gdbarch
, 8 * TARGET_CHAR_BIT
);
2915 set_gdbarch_char_signed (gdbarch
, 0);
2917 set_gdbarch_frame_align (gdbarch
, rs6000_frame_align
);
2918 if (sysv_abi
&& wordsize
== 8)
2920 set_gdbarch_frame_red_zone_size (gdbarch
, 288);
2921 else if (!sysv_abi
&& wordsize
== 4)
2922 /* PowerOpen / AIX 32 bit. */
2923 set_gdbarch_frame_red_zone_size (gdbarch
, 220);
2924 set_gdbarch_deprecated_save_dummy_frame_tos (gdbarch
, generic_save_dummy_frame_tos
);
2925 set_gdbarch_believe_pcc_promotion (gdbarch
, 1);
2927 set_gdbarch_deprecated_register_convertible (gdbarch
, rs6000_register_convertible
);
2928 set_gdbarch_deprecated_register_convert_to_virtual (gdbarch
, rs6000_register_convert_to_virtual
);
2929 set_gdbarch_deprecated_register_convert_to_raw (gdbarch
, rs6000_register_convert_to_raw
);
2930 set_gdbarch_stab_reg_to_regnum (gdbarch
, rs6000_stab_reg_to_regnum
);
2931 /* Note: kevinb/2002-04-12: I'm not convinced that rs6000_push_arguments()
2932 is correct for the SysV ABI when the wordsize is 8, but I'm also
2933 fairly certain that ppc_sysv_abi_push_arguments() will give even
2934 worse results since it only works for 32-bit code. So, for the moment,
2935 we're better off calling rs6000_push_arguments() since it works for
2936 64-bit code. At some point in the future, this matter needs to be
2938 if (sysv_abi
&& wordsize
== 4)
2939 set_gdbarch_push_dummy_call (gdbarch
, ppc_sysv_abi_push_dummy_call
);
2941 set_gdbarch_push_dummy_call (gdbarch
, rs6000_push_dummy_call
);
2943 set_gdbarch_extract_struct_value_address (gdbarch
, rs6000_extract_struct_value_address
);
2944 set_gdbarch_deprecated_pop_frame (gdbarch
, rs6000_pop_frame
);
2946 set_gdbarch_skip_prologue (gdbarch
, rs6000_skip_prologue
);
2947 set_gdbarch_inner_than (gdbarch
, core_addr_lessthan
);
2948 set_gdbarch_decr_pc_after_break (gdbarch
, 0);
2949 set_gdbarch_function_start_offset (gdbarch
, 0);
2950 set_gdbarch_breakpoint_from_pc (gdbarch
, rs6000_breakpoint_from_pc
);
2952 /* Not sure on this. FIXMEmgo */
2953 set_gdbarch_frame_args_skip (gdbarch
, 8);
2956 set_gdbarch_use_struct_convention (gdbarch
,
2957 ppc_sysv_abi_use_struct_convention
);
2959 set_gdbarch_use_struct_convention (gdbarch
,
2960 generic_use_struct_convention
);
2962 set_gdbarch_frameless_function_invocation (gdbarch
,
2963 rs6000_frameless_function_invocation
);
2964 set_gdbarch_deprecated_frame_chain (gdbarch
, rs6000_frame_chain
);
2965 set_gdbarch_deprecated_frame_saved_pc (gdbarch
, rs6000_frame_saved_pc
);
2967 set_gdbarch_deprecated_frame_init_saved_regs (gdbarch
, rs6000_frame_init_saved_regs
);
2968 set_gdbarch_deprecated_init_extra_frame_info (gdbarch
, rs6000_init_extra_frame_info
);
2972 /* Handle RS/6000 function pointers (which are really function
2974 set_gdbarch_convert_from_func_ptr_addr (gdbarch
,
2975 rs6000_convert_from_func_ptr_addr
);
2977 set_gdbarch_deprecated_frame_args_address (gdbarch
, rs6000_frame_args_address
);
2978 set_gdbarch_deprecated_frame_locals_address (gdbarch
, rs6000_frame_args_address
);
2979 set_gdbarch_deprecated_saved_pc_after_call (gdbarch
, rs6000_saved_pc_after_call
);
2981 /* Helpers for function argument information. */
2982 set_gdbarch_fetch_pointer_argument (gdbarch
, rs6000_fetch_pointer_argument
);
2984 /* Hook in ABI-specific overrides, if they have been registered. */
2985 gdbarch_init_osabi (info
, gdbarch
);
2991 rs6000_dump_tdep (struct gdbarch
*current_gdbarch
, struct ui_file
*file
)
2993 struct gdbarch_tdep
*tdep
= gdbarch_tdep (current_gdbarch
);
2998 /* FIXME: Dump gdbarch_tdep. */
3001 static struct cmd_list_element
*info_powerpc_cmdlist
= NULL
;
3004 rs6000_info_powerpc_command (char *args
, int from_tty
)
3006 help_list (info_powerpc_cmdlist
, "info powerpc ", class_info
, gdb_stdout
);
3009 /* Initialization code. */
3011 extern initialize_file_ftype _initialize_rs6000_tdep
; /* -Wmissing-prototypes */
3014 _initialize_rs6000_tdep (void)
3016 gdbarch_register (bfd_arch_rs6000
, rs6000_gdbarch_init
, rs6000_dump_tdep
);
3017 gdbarch_register (bfd_arch_powerpc
, rs6000_gdbarch_init
, rs6000_dump_tdep
);
3019 /* Add root prefix command for "info powerpc" commands */
3020 add_prefix_cmd ("powerpc", class_info
, rs6000_info_powerpc_command
,
3021 "Various POWERPC info specific commands.",
3022 &info_powerpc_cmdlist
, "info powerpc ", 0, &infolist
);