gdb/ser-unix.c

   1 /* Serial interface for local (hardwired) serial ports on Un*x like systems
   2    Copyright 1992, 1993, 1994, 1998 Free Software Foundation, Inc.
   3
   4 This file is part of GDB.
   5
   6 This program is free software; you can redistribute it and/or modify
   7 it under the terms of the GNU General Public License as published by
   8 the Free Software Foundation; either version 2 of the License, or
   9 (at your option) any later version.
  10
  11 This program is distributed in the hope that it will be useful,
  12 but WITHOUT ANY WARRANTY; without even the implied warranty of
  13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14 GNU General Public License for more details.
  15
  16 You should have received a copy of the GNU General Public License
  17 along with this program; if not, write to the Free Software
  18 Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
  19
  20 #include "defs.h"
  21 #include "serial.h"
  22 #include <fcntl.h>
  23 #include <sys/types.h>
  24 #include "terminal.h"
  25 #ifdef HAVE_UNISTD_H
  26 #include <unistd.h>
  27 #endif
  28
  29 #ifdef HAVE_TERMIOS
  30
  31 struct hardwire_ttystate
  32 {
  33   struct termios termios;
  34 };
  35 #endif /* termios */
  36
  37 #ifdef HAVE_TERMIO
  38
  39 /* It is believed that all systems which have added job control to SVR3
  40    (e.g. sco) have also added termios.  Even if not, trying to figure out
  41    all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty
  42    bewildering.  So we don't attempt it.  */
  43
  44 struct hardwire_ttystate
  45 {
  46   struct termio termio;
  47 };
  48 #endif /* termio */
  49
  50 #ifdef HAVE_SGTTY
  51 /* Needed for the code which uses select().  We would include <sys/select.h>
  52    too if it existed on all systems.  */
  53 #include <sys/time.h>
  54
  55 struct hardwire_ttystate
  56 {
  57   struct sgttyb sgttyb;
  58   struct tchars tc;
  59   struct ltchars ltc;
  60   /* Line discipline flags.  */
  61   int lmode;
  62 };
  63 #endif /* sgtty */
  64
  65 static int hardwire_open PARAMS ((serial_t scb, const char *name));
  66 static void hardwire_raw PARAMS ((serial_t scb));
  67 static int wait_for PARAMS ((serial_t scb, int timeout));
  68 static int hardwire_readchar PARAMS ((serial_t scb, int timeout));
  69 static int rate_to_code PARAMS ((int rate));
  70 static int hardwire_setbaudrate PARAMS ((serial_t scb, int rate));
  71 static int hardwire_write PARAMS ((serial_t scb, const char *str, int len));
  72 static void hardwire_close PARAMS ((serial_t scb));
  73 static int get_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
  74 static int set_tty_state PARAMS ((serial_t scb, struct hardwire_ttystate *state));
  75 static serial_ttystate hardwire_get_tty_state PARAMS ((serial_t scb));
  76 static int hardwire_set_tty_state PARAMS ((serial_t scb, serial_ttystate state));
  77 static int hardwire_noflush_set_tty_state PARAMS ((serial_t, serial_ttystate,
  78                                                    serial_ttystate));
  79 static void hardwire_print_tty_state PARAMS ((serial_t, serial_ttystate));
  80 static int hardwire_drain_output PARAMS ((serial_t));
  81 static int hardwire_flush_output PARAMS ((serial_t));
  82 static int hardwire_flush_input PARAMS ((serial_t));
  83 static int hardwire_send_break PARAMS ((serial_t));
  84 static int hardwire_setstopbits PARAMS ((serial_t, int));
  85
  86 #ifdef __CYGWIN32__
  87 extern void (*ui_loop_hook) PARAMS ((int));
  88 #endif
  89
  90 /* Open up a real live device for serial I/O */
  91
  92 static int
  93 hardwire_open(scb, name)
  94      serial_t scb;
  95      const char *name;
  96 {
  97   scb->fd = open (name, O_RDWR);
  98   if (scb->fd < 0)
  99     return -1;
 100
 101   return 0;
 102 }
 103
 104 static int
 105 get_tty_state(scb, state)
 106      serial_t scb;
 107      struct hardwire_ttystate *state;
 108 {
 109 #ifdef HAVE_TERMIOS
 110   extern int errno;
 111
 112   if (tcgetattr(scb->fd, &state->termios) < 0)
 113     return -1;
 114
 115   return 0;
 116 #endif
 117
 118 #ifdef HAVE_TERMIO
 119   if (ioctl (scb->fd, TCGETA, &state->termio) < 0)
 120     return -1;
 121   return 0;
 122 #endif
 123
 124 #ifdef HAVE_SGTTY
 125   if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0)
 126     return -1;
 127   if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0)
 128     return -1;
 129   if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0)
 130     return -1;
 131   if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0)
 132     return -1;
 133
 134   return 0;
 135 #endif
 136 }
 137
 138 static int
 139 set_tty_state(scb, state)
 140      serial_t scb;
 141      struct hardwire_ttystate *state;
 142 {
 143 #ifdef HAVE_TERMIOS
 144   if (tcsetattr(scb->fd, TCSANOW, &state->termios) < 0)
 145     return -1;
 146
 147   return 0;
 148 #endif
 149
 150 #ifdef HAVE_TERMIO
 151   if (ioctl (scb->fd, TCSETA, &state->termio) < 0)
 152     return -1;
 153   return 0;
 154 #endif
 155
 156 #ifdef HAVE_SGTTY
 157   if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0)
 158     return -1;
 159   if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0)
 160     return -1;
 161   if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0)
 162     return -1;
 163   if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0)
 164     return -1;
 165
 166   return 0;
 167 #endif
 168 }
 169
 170 static serial_ttystate
 171 hardwire_get_tty_state(scb)
 172      serial_t scb;
 173 {
 174   struct hardwire_ttystate *state;
 175
 176   state = (struct hardwire_ttystate *)xmalloc(sizeof *state);
 177
 178   if (get_tty_state(scb, state))
 179     return NULL;
 180
 181   return (serial_ttystate)state;
 182 }
 183
 184 static int
 185 hardwire_set_tty_state(scb, ttystate)
 186      serial_t scb;
 187      serial_ttystate ttystate;
 188 {
 189   struct hardwire_ttystate *state;
 190
 191   state = (struct hardwire_ttystate *)ttystate;
 192
 193   return set_tty_state(scb, state);
 194 }
 195
 196 static int
 197 hardwire_noflush_set_tty_state (scb, new_ttystate, old_ttystate)
 198      serial_t scb;
 199      serial_ttystate new_ttystate;
 200      serial_ttystate old_ttystate;
 201 {
 202   struct hardwire_ttystate new_state;
 203 #ifdef HAVE_SGTTY
 204   struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate;
 205 #endif
 206
 207   new_state = *(struct hardwire_ttystate *)new_ttystate;
 208
 209   /* Don't change in or out of raw mode; we don't want to flush input.
 210      termio and termios have no such restriction; for them flushing input
 211      is separate from setting the attributes.  */
 212
 213 #ifdef HAVE_SGTTY
 214   if (state->sgttyb.sg_flags & RAW)
 215     new_state.sgttyb.sg_flags |= RAW;
 216   else
 217     new_state.sgttyb.sg_flags &= ~RAW;
 218
 219   /* I'm not sure whether this is necessary; the manpage just mentions
 220      RAW not CBREAK.  */
 221   if (state->sgttyb.sg_flags & CBREAK)
 222     new_state.sgttyb.sg_flags |= CBREAK;
 223   else
 224     new_state.sgttyb.sg_flags &= ~CBREAK;
 225 #endif
 226
 227   return set_tty_state (scb, &new_state);
 228 }
 229
 230 static void
 231 hardwire_print_tty_state (scb, ttystate)
 232      serial_t scb;
 233      serial_ttystate ttystate;
 234 {
 235   struct hardwire_ttystate *state = (struct hardwire_ttystate *) ttystate;
 236   int i;
 237
 238 #ifdef HAVE_TERMIOS
 239   printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n",
 240                    state->termios.c_iflag, state->termios.c_oflag);
 241   printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x\n",
 242                    state->termios.c_cflag, state->termios.c_lflag);
 243 #if 0
 244   /* This not in POSIX, and is not really documented by those systems
 245      which have it (at least not Sun).  */
 246   printf_filtered ("c_line = 0x%x.\n", state->termios.c_line);
 247 #endif
 248   printf_filtered ("c_cc: ");
 249   for (i = 0; i < NCCS; i += 1)
 250     printf_filtered ("0x%x ", state->termios.c_cc[i]);
 251   printf_filtered ("\n");
 252 #endif
 253
 254 #ifdef HAVE_TERMIO
 255   printf_filtered ("c_iflag = 0x%x, c_oflag = 0x%x,\n",
 256                    state->termio.c_iflag, state->termio.c_oflag);
 257   printf_filtered ("c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n",
 258                    state->termio.c_cflag, state->termio.c_lflag,
 259                    state->termio.c_line);
 260   printf_filtered ("c_cc: ");
 261   for (i = 0; i < NCC; i += 1)
 262     printf_filtered ("0x%x ", state->termio.c_cc[i]);
 263   printf_filtered ("\n");
 264 #endif
 265
 266 #ifdef HAVE_SGTTY
 267   printf_filtered ("sgttyb.sg_flags = 0x%x.\n", state->sgttyb.sg_flags);
 268
 269   printf_filtered ("tchars: ");
 270   for (i = 0; i < (int)sizeof (struct tchars); i++)
 271     printf_filtered ("0x%x ", ((unsigned char *)&state->tc)[i]);
 272   printf_filtered ("\n");
 273
 274   printf_filtered ("ltchars: ");
 275   for (i = 0; i < (int)sizeof (struct ltchars); i++)
 276     printf_filtered ("0x%x ", ((unsigned char *)&state->ltc)[i]);
 277   printf_filtered ("\n");
 278
 279   printf_filtered ("lmode:  0x%x\n", state->lmode);
 280 #endif
 281 }
 282
 283 /* Wait for the output to drain away, as opposed to flushing (discarding) it */
 284
 285 static int
 286 hardwire_drain_output (scb)
 287      serial_t scb;
 288 {
 289 #ifdef HAVE_TERMIOS
 290   return tcdrain (scb->fd);
 291 #endif
 292
 293 #ifdef HAVE_TERMIO
 294   return ioctl (scb->fd, TCSBRK, 1);
 295 #endif
 296
 297 #ifdef HAVE_SGTTY
 298   /* Get the current state and then restore it using TIOCSETP,
 299      which should cause the output to drain and pending input
 300      to be discarded. */
 301   {
 302     struct hardwire_ttystate state;
 303     if (get_tty_state (scb, &state))
 304       {
 305         return (-1);
 306       }
 307     else
 308       {
 309         return (ioctl (scb->fd, TIOCSETP, &state.sgttyb));
 310       }
 311   }
 312 #endif
 313 }
 314
 315 static int
 316 hardwire_flush_output (scb)
 317      serial_t scb;
 318 {
 319 #ifdef HAVE_TERMIOS
 320   return tcflush (scb->fd, TCOFLUSH);
 321 #endif
 322
 323 #ifdef HAVE_TERMIO
 324   return ioctl (scb->fd, TCFLSH, 1);
 325 #endif
 326
 327 #ifdef HAVE_SGTTY
 328   /* This flushes both input and output, but we can't do better.  */
 329   return ioctl (scb->fd, TIOCFLUSH, 0);
 330 #endif
 331 }
 332
 333 static int
 334 hardwire_flush_input (scb)
 335      serial_t scb;
 336 {
 337   scb->bufcnt = 0;
 338   scb->bufp = scb->buf;
 339
 340 #ifdef HAVE_TERMIOS
 341   return tcflush (scb->fd, TCIFLUSH);
 342 #endif
 343
 344 #ifdef HAVE_TERMIO
 345   return ioctl (scb->fd, TCFLSH, 0);
 346 #endif
 347
 348 #ifdef HAVE_SGTTY
 349   /* This flushes both input and output, but we can't do better.  */
 350   return ioctl (scb->fd, TIOCFLUSH, 0);
 351 #endif
 352 }
 353
 354 static int
 355 hardwire_send_break (scb)
 356      serial_t scb;
 357 {
 358 #ifdef HAVE_TERMIOS
 359   return tcsendbreak (scb->fd, 0);
 360 #endif
 361
 362 #ifdef HAVE_TERMIO
 363   return ioctl (scb->fd, TCSBRK, 0);
 364 #endif
 365
 366 #ifdef HAVE_SGTTY
 367   {
 368     int status;
 369     struct timeval timeout;
 370
 371     status = ioctl (scb->fd, TIOCSBRK, 0);
 372
 373     /* Can't use usleep; it doesn't exist in BSD 4.2.  */
 374     /* Note that if this select() is interrupted by a signal it will not wait
 375        the full length of time.  I think that is OK.  */
 376     timeout.tv_sec = 0;
 377     timeout.tv_usec = 250000;
 378     select (0, 0, 0, 0, &timeout);
 379     status = ioctl (scb->fd, TIOCCBRK, 0);
 380     return status;
 381   }
 382 #endif
 383 }
 384
 385 static void
 386 hardwire_raw(scb)
 387      serial_t scb;
 388 {
 389   struct hardwire_ttystate state;
 390
 391   if (get_tty_state(scb, &state))
 392     fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
 393
 394 #ifdef HAVE_TERMIOS
 395   state.termios.c_iflag = 0;
 396   state.termios.c_oflag = 0;
 397   state.termios.c_lflag = 0;
 398   state.termios.c_cflag &= ~(CSIZE|PARENB);
 399   state.termios.c_cflag |= CLOCAL | CS8;
 400   state.termios.c_cc[VMIN] = 0;
 401   state.termios.c_cc[VTIME] = 0;
 402 #endif
 403
 404 #ifdef HAVE_TERMIO
 405   state.termio.c_iflag = 0;
 406   state.termio.c_oflag = 0;
 407   state.termio.c_lflag = 0;
 408   state.termio.c_cflag &= ~(CSIZE|PARENB);
 409   state.termio.c_cflag |= CLOCAL | CS8;
 410   state.termio.c_cc[VMIN] = 0;
 411   state.termio.c_cc[VTIME] = 0;
 412 #endif
 413
 414 #ifdef HAVE_SGTTY
 415   state.sgttyb.sg_flags |= RAW | ANYP;
 416   state.sgttyb.sg_flags &= ~(CBREAK | ECHO);
 417 #endif
 418
 419   scb->current_timeout = 0;
 420
 421   if (set_tty_state (scb, &state))
 422     fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
 423 }
 424
 425 /* Wait for input on scb, with timeout seconds.  Returns 0 on success,
 426    otherwise SERIAL_TIMEOUT or SERIAL_ERROR.
 427
 428    For termio{s}, we actually just setup VTIME if necessary, and let the
 429    timeout occur in the read() in hardwire_read().
 430  */
 431
 432 static int
 433 wait_for(scb, timeout)
 434      serial_t scb;
 435      int timeout;
 436 {
 437 #ifndef __CYGWIN32__
 438   scb->timeout_remaining = 0;
 439 #endif
 440
 441 #ifdef HAVE_SGTTY
 442   {
 443     struct timeval tv;
 444     fd_set readfds;
 445
 446     FD_ZERO (&readfds);
 447
 448     tv.tv_sec = timeout;
 449     tv.tv_usec = 0;
 450
 451     FD_SET(scb->fd, &readfds);
 452
 453     while (1)
 454       {
 455         int numfds;
 456
 457         if (timeout >= 0)
 458           numfds = select(scb->fd+1, &readfds, 0, 0, &tv);
 459         else
 460           numfds = select(scb->fd+1, &readfds, 0, 0, 0);
 461
 462         if (numfds <= 0)
 463           if (numfds == 0)
 464             return SERIAL_TIMEOUT;
 465           else if (errno == EINTR)
 466             continue;
 467           else
 468             return SERIAL_ERROR;        /* Got an error from select or poll */
 469
 470         return 0;
 471       }
 472   }
 473 #endif  /* HAVE_SGTTY */
 474
 475 #if defined HAVE_TERMIO || defined HAVE_TERMIOS
 476   if (timeout == scb->current_timeout)
 477     return 0;
 478
 479   scb->current_timeout = timeout;
 480
 481   {
 482     struct hardwire_ttystate state;
 483
 484     if (get_tty_state(scb, &state))
 485       fprintf_unfiltered(gdb_stderr, "get_tty_state failed: %s\n", safe_strerror(errno));
 486
 487 #ifdef HAVE_TERMIOS
 488     if (timeout < 0)
 489       {
 490         /* No timeout.  */
 491         state.termios.c_cc[VTIME] = 0;
 492         state.termios.c_cc[VMIN] = 1;
 493       }
 494     else
 495       {
 496         state.termios.c_cc[VMIN] = 0;
 497         state.termios.c_cc[VTIME] = timeout * 10;
 498         if (state.termios.c_cc[VTIME] != timeout * 10)
 499           {
 500
 501             /* If c_cc is an 8-bit signed character, we can't go
 502                bigger than this.  If it is always unsigned, we could use
 503                25.  */
 504
 505             scb->current_timeout = 12;
 506             state.termios.c_cc[VTIME] = scb->current_timeout * 10;
 507             scb->timeout_remaining = timeout - scb->current_timeout;
 508           }
 509       }
 510 #endif
 511
 512 #ifdef HAVE_TERMIO
 513     if (timeout < 0)
 514       {
 515         /* No timeout.  */
 516         state.termio.c_cc[VTIME] = 0;
 517         state.termio.c_cc[VMIN] = 1;
 518       }
 519     else
 520       {
 521         state.termio.c_cc[VMIN] = 0;
 522         state.termio.c_cc[VTIME] = timeout * 10;
 523         if (state.termio.c_cc[VTIME] != timeout * 10)
 524           {
 525             /* If c_cc is an 8-bit signed character, we can't go
 526                bigger than this.  If it is always unsigned, we could use
 527                25.  */
 528
 529             scb->current_timeout = 12;
 530             state.termio.c_cc[VTIME] = scb->current_timeout * 10;
 531             scb->timeout_remaining = timeout - scb->current_timeout;
 532           }
 533       }
 534 #endif
 535
 536     if (set_tty_state (scb, &state))
 537       fprintf_unfiltered(gdb_stderr, "set_tty_state failed: %s\n", safe_strerror(errno));
 538
 539     return 0;
 540   }
 541 #endif  /* HAVE_TERMIO || HAVE_TERMIOS */
 542 }
 543
 544 /* Read a character with user-specified timeout.  TIMEOUT is number of seconds
 545    to wait, or -1 to wait forever.  Use timeout of 0 to effect a poll.  Returns
 546    char if successful.  Returns SERIAL_TIMEOUT if timeout expired, EOF if line
 547    dropped dead, or SERIAL_ERROR for any other error (see errno in that case).  */
 548 static int
 549 hardwire_readchar(scb, timeout)
 550      serial_t scb;
 551      int timeout;
 552 {
 553   int status, t;
 554
 555   if (scb->bufcnt-- > 0)
 556     return *scb->bufp++;
 557
 558 #ifdef __CYGWIN32__
 559   if (timeout > 0)
 560     timeout++;
 561 #endif
 562
 563   while (1)
 564     {
 565 #ifdef __CYGWIN32__
 566       t = timeout == 0 ? 0 : 1;
 567       scb->timeout_remaining = timeout < 0 ? timeout : timeout - t;
 568       status = wait_for (scb, t);
 569
 570       /* -2 means disable timer */
 571       if (ui_loop_hook)
 572         ui_loop_hook (-2);
 573 #else
 574       status = wait_for (scb, timeout);
 575 #endif
 576       if (status < 0)
 577         return status;
 578
 579       scb->bufcnt = read (scb->fd, scb->buf, BUFSIZ);
 580
 581       if (scb->bufcnt <= 0)
 582         {
 583           if (scb->bufcnt == 0)
 584             {
 585               /* Zero characters means timeout (it could also be EOF, but
 586                  we don't (yet at least) distinguish).  */
 587               if (scb->timeout_remaining > 0)
 588                 {
 589                   timeout = scb->timeout_remaining;
 590                   continue;
 591                 }
 592 #ifdef __CYGWIN32__
 593           else if (scb->timeout_remaining < 0)
 594             continue;
 595 #endif
 596               else
 597                 return SERIAL_TIMEOUT;
 598             }
 599           else if (errno == EINTR)
 600             continue;
 601           else
 602             return SERIAL_ERROR;        /* Got an error from read */
 603         }
 604
 605       scb->bufcnt--;
 606       scb->bufp = scb->buf;
 607       return *scb->bufp++;
 608     }
 609 }
 610
 611 #ifndef B19200
 612 #define B19200 EXTA
 613 #endif
 614
 615 #ifndef B38400
 616 #define B38400 EXTB
 617 #endif
 618
 619 /* Translate baud rates from integers to damn B_codes.  Unix should
 620    have outgrown this crap years ago, but even POSIX wouldn't buck it.  */
 621
 622 static struct
 623 {
 624   int rate;
 625   int code;
 626 }
 627 baudtab[] =
 628 {
 629   {50, B50},
 630   {75, B75},
 631   {110, B110},
 632   {134, B134},
 633   {150, B150},
 634   {200, B200},
 635   {300, B300},
 636   {600, B600},
 637   {1200, B1200},
 638   {1800, B1800},
 639   {2400, B2400},
 640   {4800, B4800},
 641   {9600, B9600},
 642   {19200, B19200},
 643   {38400, B38400},
 644 #ifdef B57600
 645   {57600, B57600},
 646 #endif
 647 #ifdef B115200
 648   {115200, B115200},
 649 #endif
 650 #ifdef B230400
 651   {230400, B230400},
 652 #endif
 653 #ifdef B460800
 654   {460800, B460800},
 655 #endif
 656   {-1, -1},
 657 };
 658
 659 static int
 660 rate_to_code(rate)
 661      int rate;
 662 {
 663   int i;
 664
 665   for (i = 0; baudtab[i].rate != -1; i++)
 666     if (rate == baudtab[i].rate)
 667       return baudtab[i].code;
 668
 669   return -1;
 670 }
 671
 672 static int
 673 hardwire_setbaudrate(scb, rate)
 674      serial_t scb;
 675      int rate;
 676 {
 677   struct hardwire_ttystate state;
 678
 679   if (get_tty_state(scb, &state))
 680     return -1;
 681
 682 #ifdef HAVE_TERMIOS
 683   cfsetospeed (&state.termios, rate_to_code (rate));
 684   cfsetispeed (&state.termios, rate_to_code (rate));
 685 #endif
 686
 687 #ifdef HAVE_TERMIO
 688 #ifndef CIBAUD
 689 #define CIBAUD CBAUD
 690 #endif
 691
 692   state.termio.c_cflag &= ~(CBAUD | CIBAUD);
 693   state.termio.c_cflag |= rate_to_code (rate);
 694 #endif
 695
 696 #ifdef HAVE_SGTTY
 697   state.sgttyb.sg_ispeed = rate_to_code (rate);
 698   state.sgttyb.sg_ospeed = rate_to_code (rate);
 699 #endif
 700
 701   return set_tty_state (scb, &state);
 702 }
 703
 704 static int
 705 hardwire_setstopbits(scb, num)
 706      serial_t scb;
 707      int num;
 708 {
 709   struct hardwire_ttystate state;
 710   int newbit;
 711
 712   if (get_tty_state(scb, &state))
 713     return -1;
 714
 715   switch (num)
 716     {
 717     case SERIAL_1_STOPBITS:
 718       newbit = 0;
 719       break;
 720     case SERIAL_1_AND_A_HALF_STOPBITS:
 721     case SERIAL_2_STOPBITS:
 722       newbit = 1;
 723       break;
 724     default:
 725       return 1;
 726     }
 727
 728 #ifdef HAVE_TERMIOS
 729   if (!newbit)
 730     state.termios.c_cflag &= ~CSTOPB;
 731   else
 732     state.termios.c_cflag |= CSTOPB; /* two bits */
 733 #endif
 734
 735 #ifdef HAVE_TERMIO
 736   if (!newbit)
 737     state.termio.c_cflag &= ~CSTOPB;
 738   else
 739     state.termio.c_cflag |= CSTOPB; /* two bits */
 740 #endif
 741
 742 #ifdef HAVE_SGTTY
 743   return 0;                     /* sgtty doesn't support this */
 744 #endif
 745
 746   return set_tty_state (scb, &state);
 747 }
 748
 749 static int
 750 hardwire_write(scb, str, len)
 751      serial_t scb;
 752      const char *str;
 753      int len;
 754 {
 755   int cc;
 756
 757   while (len > 0)
 758     {
 759       cc = write(scb->fd, str, len);
 760
 761       if (cc < 0)
 762         return 1;
 763       len -= cc;
 764       str += cc;
 765     }
 766   return 0;
 767 }
 768
 769 static void
 770 hardwire_close(scb)
 771      serial_t scb;
 772 {
 773   if (scb->fd < 0)
 774     return;
 775
 776   close(scb->fd);
 777   scb->fd = -1;
 778 }
 779
 780 static struct serial_ops hardwire_ops =
 781 {
 782   "hardwire",
 783   0,
 784   hardwire_open,
 785   hardwire_close,
 786   hardwire_readchar,
 787   hardwire_write,
 788   hardwire_flush_output,
 789   hardwire_flush_input,
 790   hardwire_send_break,
 791   hardwire_raw,
 792   hardwire_get_tty_state,
 793   hardwire_set_tty_state,
 794   hardwire_print_tty_state,
 795   hardwire_noflush_set_tty_state,
 796   hardwire_setbaudrate,
 797   hardwire_setstopbits,
 798   hardwire_drain_output,        /* wait for output to drain */
 799 };
 800
 801 void
 802 _initialize_ser_hardwire ()
 803 {
 804   serial_add_interface (&hardwire_ops);
 805 }