gdb/ser-unix.c

   1 /* Serial interface for local (hardwired) serial ports on Un*x like systems
   2
   3    Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2003,
   4    2004, 2005, 2007 Free Software Foundation, Inc.
   5
   6    This file is part of GDB.
   7
   8    This program is free software; you can redistribute it and/or modify
   9    it under the terms of the GNU General Public License as published by
  10    the Free Software Foundation; either version 3 of the License, or
  11    (at your option) any later version.
  12
  13    This program is distributed in the hope that it will be useful,
  14    but WITHOUT ANY WARRANTY; without even the implied warranty of
  15    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  16    GNU General Public License for more details.
  17
  18    You should have received a copy of the GNU General Public License
  19    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  20
  21 #include "defs.h"
  22 #include "serial.h"
  23 #include "ser-base.h"
  24 #include "ser-unix.h"
  25
  26 #include <fcntl.h>
  27 #include <sys/types.h>
  28 #include "terminal.h"
  29 #include <sys/socket.h>
  30 #include <sys/time.h>
  31
  32 #include "gdb_select.h"
  33 #include "gdb_string.h"
  34 #include "gdbcmd.h"
  35
  36 #ifdef HAVE_TERMIOS
  37
  38 struct hardwire_ttystate
  39   {
  40     struct termios termios;
  41   };
  42
  43 #ifdef CRTSCTS
  44 /* Boolean to explicitly enable or disable h/w flow control.  */
  45 static int serial_hwflow;
  46 static void
  47 show_serial_hwflow (struct ui_file *file, int from_tty,
  48                     struct cmd_list_element *c, const char *value)
  49 {
  50   fprintf_filtered (file, _("Hardware flow control is %s.\n"), value);
  51 }
  52 #endif
  53
  54 #endif /* termios */
  55
  56 #ifdef HAVE_TERMIO
  57
  58 /* It is believed that all systems which have added job control to SVR3
  59    (e.g. sco) have also added termios.  Even if not, trying to figure out
  60    all the variations (TIOCGPGRP vs. TCGETPGRP, etc.) would be pretty
  61    bewildering.  So we don't attempt it.  */
  62
  63 struct hardwire_ttystate
  64   {
  65     struct termio termio;
  66   };
  67 #endif /* termio */
  68
  69 #ifdef HAVE_SGTTY
  70 struct hardwire_ttystate
  71   {
  72     struct sgttyb sgttyb;
  73     struct tchars tc;
  74     struct ltchars ltc;
  75     /* Line discipline flags.  */
  76     int lmode;
  77   };
  78 #endif /* sgtty */
  79
  80 static int hardwire_open (struct serial *scb, const char *name);
  81 static void hardwire_raw (struct serial *scb);
  82 static int wait_for (struct serial *scb, int timeout);
  83 static int hardwire_readchar (struct serial *scb, int timeout);
  84 static int do_hardwire_readchar (struct serial *scb, int timeout);
  85 static int rate_to_code (int rate);
  86 static int hardwire_setbaudrate (struct serial *scb, int rate);
  87 static void hardwire_close (struct serial *scb);
  88 static int get_tty_state (struct serial *scb,
  89                           struct hardwire_ttystate * state);
  90 static int set_tty_state (struct serial *scb,
  91                           struct hardwire_ttystate * state);
  92 static serial_ttystate hardwire_get_tty_state (struct serial *scb);
  93 static int hardwire_set_tty_state (struct serial *scb, serial_ttystate state);
  94 static int hardwire_noflush_set_tty_state (struct serial *, serial_ttystate,
  95                                            serial_ttystate);
  96 static void hardwire_print_tty_state (struct serial *, serial_ttystate,
  97                                       struct ui_file *);
  98 static int hardwire_drain_output (struct serial *);
  99 static int hardwire_flush_output (struct serial *);
 100 static int hardwire_flush_input (struct serial *);
 101 static int hardwire_send_break (struct serial *);
 102 static int hardwire_setstopbits (struct serial *, int);
 103
 104 void _initialize_ser_hardwire (void);
 105
 106 /* Open up a real live device for serial I/O */
 107
 108 static int
 109 hardwire_open (struct serial *scb, const char *name)
 110 {
 111   scb->fd = open (name, O_RDWR);
 112   if (scb->fd < 0)
 113     return -1;
 114
 115   return 0;
 116 }
 117
 118 static int
 119 get_tty_state (struct serial *scb, struct hardwire_ttystate *state)
 120 {
 121 #ifdef HAVE_TERMIOS
 122   if (tcgetattr (scb->fd, &state->termios) < 0)
 123     return -1;
 124
 125   return 0;
 126 #endif
 127
 128 #ifdef HAVE_TERMIO
 129   if (ioctl (scb->fd, TCGETA, &state->termio) < 0)
 130     return -1;
 131   return 0;
 132 #endif
 133
 134 #ifdef HAVE_SGTTY
 135   if (ioctl (scb->fd, TIOCGETP, &state->sgttyb) < 0)
 136     return -1;
 137   if (ioctl (scb->fd, TIOCGETC, &state->tc) < 0)
 138     return -1;
 139   if (ioctl (scb->fd, TIOCGLTC, &state->ltc) < 0)
 140     return -1;
 141   if (ioctl (scb->fd, TIOCLGET, &state->lmode) < 0)
 142     return -1;
 143
 144   return 0;
 145 #endif
 146 }
 147
 148 static int
 149 set_tty_state (struct serial *scb, struct hardwire_ttystate *state)
 150 {
 151 #ifdef HAVE_TERMIOS
 152   if (tcsetattr (scb->fd, TCSANOW, &state->termios) < 0)
 153     return -1;
 154
 155   return 0;
 156 #endif
 157
 158 #ifdef HAVE_TERMIO
 159   if (ioctl (scb->fd, TCSETA, &state->termio) < 0)
 160     return -1;
 161   return 0;
 162 #endif
 163
 164 #ifdef HAVE_SGTTY
 165   if (ioctl (scb->fd, TIOCSETN, &state->sgttyb) < 0)
 166     return -1;
 167   if (ioctl (scb->fd, TIOCSETC, &state->tc) < 0)
 168     return -1;
 169   if (ioctl (scb->fd, TIOCSLTC, &state->ltc) < 0)
 170     return -1;
 171   if (ioctl (scb->fd, TIOCLSET, &state->lmode) < 0)
 172     return -1;
 173
 174   return 0;
 175 #endif
 176 }
 177
 178 static serial_ttystate
 179 hardwire_get_tty_state (struct serial *scb)
 180 {
 181   struct hardwire_ttystate *state;
 182
 183   state = (struct hardwire_ttystate *) xmalloc (sizeof *state);
 184
 185   if (get_tty_state (scb, state))
 186     return NULL;
 187
 188   return (serial_ttystate) state;
 189 }
 190
 191 static int
 192 hardwire_set_tty_state (struct serial *scb, serial_ttystate ttystate)
 193 {
 194   struct hardwire_ttystate *state;
 195
 196   state = (struct hardwire_ttystate *) ttystate;
 197
 198   return set_tty_state (scb, state);
 199 }
 200
 201 static int
 202 hardwire_noflush_set_tty_state (struct serial *scb,
 203                                 serial_ttystate new_ttystate,
 204                                 serial_ttystate old_ttystate)
 205 {
 206   struct hardwire_ttystate new_state;
 207 #ifdef HAVE_SGTTY
 208   struct hardwire_ttystate *state = (struct hardwire_ttystate *) old_ttystate;
 209 #endif
 210
 211   new_state = *(struct hardwire_ttystate *) new_ttystate;
 212
 213   /* Don't change in or out of raw mode; we don't want to flush input.
 214      termio and termios have no such restriction; for them flushing input
 215      is separate from setting the attributes.  */
 216
 217 #ifdef HAVE_SGTTY
 218   if (state->sgttyb.sg_flags & RAW)
 219     new_state.sgttyb.sg_flags |= RAW;
 220   else
 221     new_state.sgttyb.sg_flags &= ~RAW;
 222
 223   /* I'm not sure whether this is necessary; the manpage just mentions
 224      RAW not CBREAK.  */
 225   if (state->sgttyb.sg_flags & CBREAK)
 226     new_state.sgttyb.sg_flags |= CBREAK;
 227   else
 228     new_state.sgttyb.sg_flags &= ~CBREAK;
 229 #endif
 230
 231   return set_tty_state (scb, &new_state);
 232 }
 233
 234 static void
 235 hardwire_print_tty_state (struct serial *scb,
 236                           serial_ttystate ttystate,
 237                           struct ui_file *stream)
 238 {
 239   struct hardwire_ttystate *state = (struct hardwire_ttystate *) ttystate;
 240   int i;
 241
 242 #ifdef HAVE_TERMIOS
 243   fprintf_filtered (stream, "c_iflag = 0x%x, c_oflag = 0x%x,\n",
 244                     (int) state->termios.c_iflag,
 245                     (int) state->termios.c_oflag);
 246   fprintf_filtered (stream, "c_cflag = 0x%x, c_lflag = 0x%x\n",
 247                     (int) state->termios.c_cflag,
 248                     (int) state->termios.c_lflag);
 249 #if 0
 250   /* This not in POSIX, and is not really documented by those systems
 251      which have it (at least not Sun).  */
 252   fprintf_filtered (stream, "c_line = 0x%x.\n", state->termios.c_line);
 253 #endif
 254   fprintf_filtered (stream, "c_cc: ");
 255   for (i = 0; i < NCCS; i += 1)
 256     fprintf_filtered (stream, "0x%x ", state->termios.c_cc[i]);
 257   fprintf_filtered (stream, "\n");
 258 #endif
 259
 260 #ifdef HAVE_TERMIO
 261   fprintf_filtered (stream, "c_iflag = 0x%x, c_oflag = 0x%x,\n",
 262                     state->termio.c_iflag, state->termio.c_oflag);
 263   fprintf_filtered (stream, "c_cflag = 0x%x, c_lflag = 0x%x, c_line = 0x%x.\n",
 264                     state->termio.c_cflag, state->termio.c_lflag,
 265                     state->termio.c_line);
 266   fprintf_filtered (stream, "c_cc: ");
 267   for (i = 0; i < NCC; i += 1)
 268     fprintf_filtered (stream, "0x%x ", state->termio.c_cc[i]);
 269   fprintf_filtered (stream, "\n");
 270 #endif
 271
 272 #ifdef HAVE_SGTTY
 273   fprintf_filtered (stream, "sgttyb.sg_flags = 0x%x.\n",
 274                     state->sgttyb.sg_flags);
 275
 276   fprintf_filtered (stream, "tchars: ");
 277   for (i = 0; i < (int) sizeof (struct tchars); i++)
 278     fprintf_filtered (stream, "0x%x ", ((unsigned char *) &state->tc)[i]);
 279   fprintf_filtered (stream, "\n");
 280
 281   fprintf_filtered (stream, "ltchars: ");
 282   for (i = 0; i < (int) sizeof (struct ltchars); i++)
 283     fprintf_filtered (stream, "0x%x ", ((unsigned char *) &state->ltc)[i]);
 284   fprintf_filtered (stream, "\n");
 285
 286   fprintf_filtered (stream, "lmode:  0x%x\n", state->lmode);
 287 #endif
 288 }
 289
 290 /* Wait for the output to drain away, as opposed to flushing (discarding) it */
 291
 292 static int
 293 hardwire_drain_output (struct serial *scb)
 294 {
 295 #ifdef HAVE_TERMIOS
 296   return tcdrain (scb->fd);
 297 #endif
 298
 299 #ifdef HAVE_TERMIO
 300   return ioctl (scb->fd, TCSBRK, 1);
 301 #endif
 302
 303 #ifdef HAVE_SGTTY
 304   /* Get the current state and then restore it using TIOCSETP,
 305      which should cause the output to drain and pending input
 306      to be discarded. */
 307   {
 308     struct hardwire_ttystate state;
 309     if (get_tty_state (scb, &state))
 310       {
 311         return (-1);
 312       }
 313     else
 314       {
 315         return (ioctl (scb->fd, TIOCSETP, &state.sgttyb));
 316       }
 317   }
 318 #endif
 319 }
 320
 321 static int
 322 hardwire_flush_output (struct serial *scb)
 323 {
 324 #ifdef HAVE_TERMIOS
 325   return tcflush (scb->fd, TCOFLUSH);
 326 #endif
 327
 328 #ifdef HAVE_TERMIO
 329   return ioctl (scb->fd, TCFLSH, 1);
 330 #endif
 331
 332 #ifdef HAVE_SGTTY
 333   /* This flushes both input and output, but we can't do better.  */
 334   return ioctl (scb->fd, TIOCFLUSH, 0);
 335 #endif
 336 }
 337
 338 static int
 339 hardwire_flush_input (struct serial *scb)
 340 {
 341   ser_base_flush_input (scb);
 342
 343 #ifdef HAVE_TERMIOS
 344   return tcflush (scb->fd, TCIFLUSH);
 345 #endif
 346
 347 #ifdef HAVE_TERMIO
 348   return ioctl (scb->fd, TCFLSH, 0);
 349 #endif
 350
 351 #ifdef HAVE_SGTTY
 352   /* This flushes both input and output, but we can't do better.  */
 353   return ioctl (scb->fd, TIOCFLUSH, 0);
 354 #endif
 355 }
 356
 357 static int
 358 hardwire_send_break (struct serial *scb)
 359 {
 360 #ifdef HAVE_TERMIOS
 361   return tcsendbreak (scb->fd, 0);
 362 #endif
 363
 364 #ifdef HAVE_TERMIO
 365   return ioctl (scb->fd, TCSBRK, 0);
 366 #endif
 367
 368 #ifdef HAVE_SGTTY
 369   {
 370     int status;
 371     struct timeval timeout;
 372
 373     status = ioctl (scb->fd, TIOCSBRK, 0);
 374
 375     /* Can't use usleep; it doesn't exist in BSD 4.2.  */
 376     /* Note that if this select() is interrupted by a signal it will not wait
 377        the full length of time.  I think that is OK.  */
 378     timeout.tv_sec = 0;
 379     timeout.tv_usec = 250000;
 380     gdb_select (0, 0, 0, 0, &timeout);
 381     status = ioctl (scb->fd, TIOCCBRK, 0);
 382     return status;
 383   }
 384 #endif
 385 }
 386
 387 static void
 388 hardwire_raw (struct serial *scb)
 389 {
 390   struct hardwire_ttystate state;
 391
 392   if (get_tty_state (scb, &state))
 393     fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno));
 394
 395 #ifdef HAVE_TERMIOS
 396   state.termios.c_iflag = 0;
 397   state.termios.c_oflag = 0;
 398   state.termios.c_lflag = 0;
 399   state.termios.c_cflag &= ~(CSIZE | PARENB);
 400   state.termios.c_cflag |= CLOCAL | CS8;
 401 #ifdef CRTSCTS
 402   /* h/w flow control.  */
 403   if (serial_hwflow)
 404     state.termios.c_cflag |= CRTSCTS;
 405   else
 406     state.termios.c_cflag &= ~CRTSCTS;
 407 #ifdef CRTS_IFLOW
 408   if (serial_hwflow)
 409     state.termios.c_cflag |= CRTS_IFLOW;
 410   else
 411     state.termios.c_cflag &= ~CRTS_IFLOW;
 412 #endif
 413 #endif
 414   state.termios.c_cc[VMIN] = 0;
 415   state.termios.c_cc[VTIME] = 0;
 416 #endif
 417
 418 #ifdef HAVE_TERMIO
 419   state.termio.c_iflag = 0;
 420   state.termio.c_oflag = 0;
 421   state.termio.c_lflag = 0;
 422   state.termio.c_cflag &= ~(CSIZE | PARENB);
 423   state.termio.c_cflag |= CLOCAL | CS8;
 424   state.termio.c_cc[VMIN] = 0;
 425   state.termio.c_cc[VTIME] = 0;
 426 #endif
 427
 428 #ifdef HAVE_SGTTY
 429   state.sgttyb.sg_flags |= RAW | ANYP;
 430   state.sgttyb.sg_flags &= ~(CBREAK | ECHO);
 431 #endif
 432
 433   scb->current_timeout = 0;
 434
 435   if (set_tty_state (scb, &state))
 436     fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", safe_strerror (errno));
 437 }
 438
 439 /* Wait for input on scb, with timeout seconds.  Returns 0 on success,
 440    otherwise SERIAL_TIMEOUT or SERIAL_ERROR.
 441
 442    For termio{s}, we actually just setup VTIME if necessary, and let the
 443    timeout occur in the read() in hardwire_read().
 444  */
 445
 446 /* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
 447    ser_base*() until the old TERMIOS/SGTTY/... timer code has been
 448    flushed. . */
 449
 450 /* NOTE: cagney/1999-09-30: Much of the code below is dead.  The only
 451    possible values of the TIMEOUT parameter are ONE and ZERO.
 452    Consequently all the code that tries to handle the possability of
 453    an overflowed timer is unnecessary. */
 454
 455 static int
 456 wait_for (struct serial *scb, int timeout)
 457 {
 458 #ifdef HAVE_SGTTY
 459   while (1)
 460     {
 461       struct timeval tv;
 462       fd_set readfds;
 463       int numfds;
 464
 465       /* NOTE: Some OS's can scramble the READFDS when the select()
 466          call fails (ex the kernel with Red Hat 5.2).  Initialize all
 467          arguments before each call. */
 468
 469       tv.tv_sec = timeout;
 470       tv.tv_usec = 0;
 471
 472       FD_ZERO (&readfds);
 473       FD_SET (scb->fd, &readfds);
 474
 475       if (timeout >= 0)
 476         numfds = gdb_select (scb->fd + 1, &readfds, 0, 0, &tv);
 477       else
 478         numfds = gdb_select (scb->fd + 1, &readfds, 0, 0, 0);
 479
 480       if (numfds <= 0)
 481         if (numfds == 0)
 482           return SERIAL_TIMEOUT;
 483         else if (errno == EINTR)
 484           continue;
 485         else
 486           return SERIAL_ERROR;  /* Got an error from select or poll */
 487
 488       return 0;
 489     }
 490 #endif /* HAVE_SGTTY */
 491
 492 #if defined HAVE_TERMIO || defined HAVE_TERMIOS
 493   if (timeout == scb->current_timeout)
 494     return 0;
 495
 496   scb->current_timeout = timeout;
 497
 498   {
 499     struct hardwire_ttystate state;
 500
 501     if (get_tty_state (scb, &state))
 502       fprintf_unfiltered (gdb_stderr, "get_tty_state failed: %s\n", safe_strerror (errno));
 503
 504 #ifdef HAVE_TERMIOS
 505     if (timeout < 0)
 506       {
 507         /* No timeout.  */
 508         state.termios.c_cc[VTIME] = 0;
 509         state.termios.c_cc[VMIN] = 1;
 510       }
 511     else
 512       {
 513         state.termios.c_cc[VMIN] = 0;
 514         state.termios.c_cc[VTIME] = timeout * 10;
 515         if (state.termios.c_cc[VTIME] != timeout * 10)
 516           {
 517
 518             /* If c_cc is an 8-bit signed character, we can't go
 519                bigger than this.  If it is always unsigned, we could use
 520                25.  */
 521
 522             scb->current_timeout = 12;
 523             state.termios.c_cc[VTIME] = scb->current_timeout * 10;
 524             scb->timeout_remaining = timeout - scb->current_timeout;
 525           }
 526       }
 527 #endif
 528
 529 #ifdef HAVE_TERMIO
 530     if (timeout < 0)
 531       {
 532         /* No timeout.  */
 533         state.termio.c_cc[VTIME] = 0;
 534         state.termio.c_cc[VMIN] = 1;
 535       }
 536     else
 537       {
 538         state.termio.c_cc[VMIN] = 0;
 539         state.termio.c_cc[VTIME] = timeout * 10;
 540         if (state.termio.c_cc[VTIME] != timeout * 10)
 541           {
 542             /* If c_cc is an 8-bit signed character, we can't go
 543                bigger than this.  If it is always unsigned, we could use
 544                25.  */
 545
 546             scb->current_timeout = 12;
 547             state.termio.c_cc[VTIME] = scb->current_timeout * 10;
 548             scb->timeout_remaining = timeout - scb->current_timeout;
 549           }
 550       }
 551 #endif
 552
 553     if (set_tty_state (scb, &state))
 554       fprintf_unfiltered (gdb_stderr, "set_tty_state failed: %s\n", safe_strerror (errno));
 555
 556     return 0;
 557   }
 558 #endif /* HAVE_TERMIO || HAVE_TERMIOS */
 559 }
 560
 561 /* Read a character with user-specified timeout.  TIMEOUT is number of seconds
 562    to wait, or -1 to wait forever.  Use timeout of 0 to effect a poll.  Returns
 563    char if successful.  Returns SERIAL_TIMEOUT if timeout expired, EOF if line
 564    dropped dead, or SERIAL_ERROR for any other error (see errno in that case).  */
 565
 566 /* FIXME: cagney/1999-09-16: Don't replace this with the equivalent
 567    ser_base*() until the old TERMIOS/SGTTY/... timer code has been
 568    flushed. */
 569
 570 /* NOTE: cagney/1999-09-16: This function is not identical to
 571    ser_base_readchar() as part of replacing it with ser_base*()
 572    merging will be required - this code handles the case where read()
 573    times out due to no data while ser_base_readchar() doesn't expect
 574    that. */
 575
 576 static int
 577 do_hardwire_readchar (struct serial *scb, int timeout)
 578 {
 579   int status, delta;
 580   int detach = 0;
 581
 582   if (timeout > 0)
 583     timeout++;
 584
 585   /* We have to be able to keep the GUI alive here, so we break the
 586      original timeout into steps of 1 second, running the "keep the
 587      GUI alive" hook each time through the loop.
 588
 589      Also, timeout = 0 means to poll, so we just set the delta to 0,
 590      so we will only go through the loop once.  */
 591
 592   delta = (timeout == 0 ? 0 : 1);
 593   while (1)
 594     {
 595
 596       /* N.B. The UI may destroy our world (for instance by calling
 597          remote_stop,) in which case we want to get out of here as
 598          quickly as possible.  It is not safe to touch scb, since
 599          someone else might have freed it.  The
 600          deprecated_ui_loop_hook signals that we should exit by
 601          returning 1.  */
 602
 603       if (deprecated_ui_loop_hook)
 604         detach = deprecated_ui_loop_hook (0);
 605
 606       if (detach)
 607         return SERIAL_TIMEOUT;
 608
 609       scb->timeout_remaining = (timeout < 0 ? timeout : timeout - delta);
 610       status = wait_for (scb, delta);
 611
 612       if (status < 0)
 613         return status;
 614
 615       status = read (scb->fd, scb->buf, BUFSIZ);
 616
 617       if (status <= 0)
 618         {
 619           if (status == 0)
 620             {
 621               /* Zero characters means timeout (it could also be EOF, but
 622                  we don't (yet at least) distinguish).  */
 623               if (scb->timeout_remaining > 0)
 624                 {
 625                   timeout = scb->timeout_remaining;
 626                   continue;
 627                 }
 628               else if (scb->timeout_remaining < 0)
 629                 continue;
 630               else
 631                 return SERIAL_TIMEOUT;
 632             }
 633           else if (errno == EINTR)
 634             continue;
 635           else
 636             return SERIAL_ERROR;        /* Got an error from read */
 637         }
 638
 639       scb->bufcnt = status;
 640       scb->bufcnt--;
 641       scb->bufp = scb->buf;
 642       return *scb->bufp++;
 643     }
 644 }
 645
 646 static int
 647 hardwire_readchar (struct serial *scb, int timeout)
 648 {
 649   return generic_readchar (scb, timeout, do_hardwire_readchar);
 650 }
 651
 652
 653 #ifndef B19200
 654 #define B19200 EXTA
 655 #endif
 656
 657 #ifndef B38400
 658 #define B38400 EXTB
 659 #endif
 660
 661 /* Translate baud rates from integers to damn B_codes.  Unix should
 662    have outgrown this crap years ago, but even POSIX wouldn't buck it.  */
 663
 664 static struct
 665 {
 666   int rate;
 667   int code;
 668 }
 669 baudtab[] =
 670 {
 671   {
 672     50, B50
 673   }
 674   ,
 675   {
 676     75, B75
 677   }
 678   ,
 679   {
 680     110, B110
 681   }
 682   ,
 683   {
 684     134, B134
 685   }
 686   ,
 687   {
 688     150, B150
 689   }
 690   ,
 691   {
 692     200, B200
 693   }
 694   ,
 695   {
 696     300, B300
 697   }
 698   ,
 699   {
 700     600, B600
 701   }
 702   ,
 703   {
 704     1200, B1200
 705   }
 706   ,
 707   {
 708     1800, B1800
 709   }
 710   ,
 711   {
 712     2400, B2400
 713   }
 714   ,
 715   {
 716     4800, B4800
 717   }
 718   ,
 719   {
 720     9600, B9600
 721   }
 722   ,
 723   {
 724     19200, B19200
 725   }
 726   ,
 727   {
 728     38400, B38400
 729   }
 730   ,
 731 #ifdef B57600
 732   {
 733     57600, B57600
 734   }
 735   ,
 736 #endif
 737 #ifdef B115200
 738   {
 739     115200, B115200
 740   }
 741   ,
 742 #endif
 743 #ifdef B230400
 744   {
 745     230400, B230400
 746   }
 747   ,
 748 #endif
 749 #ifdef B460800
 750   {
 751     460800, B460800
 752   }
 753   ,
 754 #endif
 755   {
 756     -1, -1
 757   }
 758   ,
 759 };
 760
 761 static int
 762 rate_to_code (int rate)
 763 {
 764   int i;
 765
 766   for (i = 0; baudtab[i].rate != -1; i++)
 767     {
 768       /* test for perfect macth. */
 769       if (rate == baudtab[i].rate)
 770         return baudtab[i].code;
 771       else
 772         {
 773           /* check if it is in between valid values. */
 774           if (rate < baudtab[i].rate)
 775             {
 776               if (i)
 777                 {
 778                   warning (_("Invalid baud rate %d.  Closest values are %d and %d."),
 779                             rate, baudtab[i - 1].rate, baudtab[i].rate);
 780                 }
 781               else
 782                 {
 783                   warning (_("Invalid baud rate %d.  Minimum value is %d."),
 784                             rate, baudtab[0].rate);
 785                 }
 786               return -1;
 787             }
 788         }
 789     }
 790
 791   /* The requested speed was too large. */
 792   warning (_("Invalid baud rate %d.  Maximum value is %d."),
 793             rate, baudtab[i - 1].rate);
 794   return -1;
 795 }
 796
 797 static int
 798 hardwire_setbaudrate (struct serial *scb, int rate)
 799 {
 800   struct hardwire_ttystate state;
 801   int baud_code = rate_to_code (rate);
 802
 803   if (baud_code < 0)
 804     {
 805       /* The baud rate was not valid.
 806          A warning has already been issued. */
 807       errno = EINVAL;
 808       return -1;
 809     }
 810
 811   if (get_tty_state (scb, &state))
 812     return -1;
 813
 814 #ifdef HAVE_TERMIOS
 815   cfsetospeed (&state.termios, baud_code);
 816   cfsetispeed (&state.termios, baud_code);
 817 #endif
 818
 819 #ifdef HAVE_TERMIO
 820 #ifndef CIBAUD
 821 #define CIBAUD CBAUD
 822 #endif
 823
 824   state.termio.c_cflag &= ~(CBAUD | CIBAUD);
 825   state.termio.c_cflag |= baud_code;
 826 #endif
 827
 828 #ifdef HAVE_SGTTY
 829   state.sgttyb.sg_ispeed = baud_code;
 830   state.sgttyb.sg_ospeed = baud_code;
 831 #endif
 832
 833   return set_tty_state (scb, &state);
 834 }
 835
 836 static int
 837 hardwire_setstopbits (struct serial *scb, int num)
 838 {
 839   struct hardwire_ttystate state;
 840   int newbit;
 841
 842   if (get_tty_state (scb, &state))
 843     return -1;
 844
 845   switch (num)
 846     {
 847     case SERIAL_1_STOPBITS:
 848       newbit = 0;
 849       break;
 850     case SERIAL_1_AND_A_HALF_STOPBITS:
 851     case SERIAL_2_STOPBITS:
 852       newbit = 1;
 853       break;
 854     default:
 855       return 1;
 856     }
 857
 858 #ifdef HAVE_TERMIOS
 859   if (!newbit)
 860     state.termios.c_cflag &= ~CSTOPB;
 861   else
 862     state.termios.c_cflag |= CSTOPB;    /* two bits */
 863 #endif
 864
 865 #ifdef HAVE_TERMIO
 866   if (!newbit)
 867     state.termio.c_cflag &= ~CSTOPB;
 868   else
 869     state.termio.c_cflag |= CSTOPB;     /* two bits */
 870 #endif
 871
 872 #ifdef HAVE_SGTTY
 873   return 0;                     /* sgtty doesn't support this */
 874 #endif
 875
 876   return set_tty_state (scb, &state);
 877 }
 878
 879 static void
 880 hardwire_close (struct serial *scb)
 881 {
 882   if (scb->fd < 0)
 883     return;
 884
 885   close (scb->fd);
 886   scb->fd = -1;
 887 }
 888 \f
 889 \f
 890 void
 891 _initialize_ser_hardwire (void)
 892 {
 893   struct serial_ops *ops = XMALLOC (struct serial_ops);
 894   memset (ops, 0, sizeof (struct serial_ops));
 895   ops->name = "hardwire";
 896   ops->next = 0;
 897   ops->open = hardwire_open;
 898   ops->close = hardwire_close;
 899   /* FIXME: Don't replace this with the equivalent ser_base*() until
 900      the old TERMIOS/SGTTY/... timer code has been flushed. cagney
 901      1999-09-16. */
 902   ops->readchar = hardwire_readchar;
 903   ops->write = ser_base_write;
 904   ops->flush_output = hardwire_flush_output;
 905   ops->flush_input = hardwire_flush_input;
 906   ops->send_break = hardwire_send_break;
 907   ops->go_raw = hardwire_raw;
 908   ops->get_tty_state = hardwire_get_tty_state;
 909   ops->set_tty_state = hardwire_set_tty_state;
 910   ops->print_tty_state = hardwire_print_tty_state;
 911   ops->noflush_set_tty_state = hardwire_noflush_set_tty_state;
 912   ops->setbaudrate = hardwire_setbaudrate;
 913   ops->setstopbits = hardwire_setstopbits;
 914   ops->drain_output = hardwire_drain_output;
 915   ops->async = ser_base_async;
 916   ops->read_prim = ser_unix_read_prim;
 917   ops->write_prim = ser_unix_write_prim;
 918   serial_add_interface (ops);
 919
 920 #ifdef HAVE_TERMIOS
 921 #ifdef CRTSCTS
 922   add_setshow_boolean_cmd ("remoteflow", no_class,
 923                            &serial_hwflow, _("\
 924 Set use of hardware flow control for remote serial I/O."), _("\
 925 Show use of hardware flow control for remote serial I/O."), _("\
 926 Enable or disable hardware flow control (RTS/CTS) on the serial port\n\
 927 when debugging using remote targets."),
 928                            NULL,
 929                            show_serial_hwflow,
 930                            &setlist, &showlist);
 931 #endif
 932 #endif
 933 }
 934
 935 int
 936 ser_unix_read_prim (struct serial *scb, size_t count)
 937 {
 938   int status;
 939
 940   while (1)
 941     {
 942       status = read (scb->fd, scb->buf, count);
 943       if (status != -1 || errno != EINTR)
 944         break;
 945     }
 946   return status;
 947 }
 948
 949 int
 950 ser_unix_write_prim (struct serial *scb, const void *buf, size_t len)
 951 {
 952   /* ??? Historically, GDB has not retried calls to "write" that
 953      result in EINTR.  */
 954   return write (scb->fd, buf, len);
 955 }