1 /* Generic symbol file reading for the GNU debugger, GDB.
3 Copyright (C) 1990-2020 Free Software Foundation, Inc.
5 Contributed by Cygnus Support, using pieces from other GDB modules.
7 This file is part of GDB.
9 This program is free software; you can redistribute it and/or modify
10 it under the terms of the GNU General Public License as published by
11 the Free Software Foundation; either version 3 of the License, or
12 (at your option) any later version.
14 This program is distributed in the hope that it will be useful,
15 but WITHOUT ANY WARRANTY; without even the implied warranty of
16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 GNU General Public License for more details.
19 You should have received a copy of the GNU General Public License
20 along with this program. If not, see <http://www.gnu.org/licenses/>. */
23 #include "arch-utils.h"
35 #include "breakpoint.h"
37 #include "complaints.h"
41 #include "filenames.h" /* for DOSish file names */
42 #include "gdb-stabs.h"
43 #include "gdb_obstack.h"
44 #include "completer.h"
47 #include "readline/tilde.h"
49 #include "observable.h"
51 #include "parser-defs.h"
58 #include "cli/cli-utils.h"
59 #include "gdbsupport/byte-vector.h"
60 #include "gdbsupport/pathstuff.h"
61 #include "gdbsupport/selftest.h"
62 #include "cli/cli-style.h"
63 #include "gdbsupport/forward-scope-exit.h"
65 #include <sys/types.h>
74 int (*deprecated_ui_load_progress_hook
) (const char *section
,
76 void (*deprecated_show_load_progress
) (const char *section
,
77 unsigned long section_sent
,
78 unsigned long section_size
,
79 unsigned long total_sent
,
80 unsigned long total_size
);
81 void (*deprecated_pre_add_symbol_hook
) (const char *);
82 void (*deprecated_post_add_symbol_hook
) (void);
84 using clear_symtab_users_cleanup
85 = FORWARD_SCOPE_EXIT (clear_symtab_users
);
87 /* Global variables owned by this file. */
88 int readnow_symbol_files
; /* Read full symbols immediately. */
89 int readnever_symbol_files
; /* Never read full symbols. */
91 /* Functions this file defines. */
93 static void symbol_file_add_main_1 (const char *args
, symfile_add_flags add_flags
,
94 objfile_flags flags
, CORE_ADDR reloff
);
96 static const struct sym_fns
*find_sym_fns (bfd
*);
98 static void overlay_invalidate_all (void);
100 static void simple_free_overlay_table (void);
102 static void read_target_long_array (CORE_ADDR
, unsigned int *, int, int,
105 static int simple_read_overlay_table (void);
107 static int simple_overlay_update_1 (struct obj_section
*);
109 static void symfile_find_segment_sections (struct objfile
*objfile
);
111 /* List of all available sym_fns. On gdb startup, each object file reader
112 calls add_symtab_fns() to register information on each format it is
115 struct registered_sym_fns
117 registered_sym_fns (bfd_flavour sym_flavour_
, const struct sym_fns
*sym_fns_
)
118 : sym_flavour (sym_flavour_
), sym_fns (sym_fns_
)
121 /* BFD flavour that we handle. */
122 enum bfd_flavour sym_flavour
;
124 /* The "vtable" of symbol functions. */
125 const struct sym_fns
*sym_fns
;
128 static std::vector
<registered_sym_fns
> symtab_fns
;
130 /* Values for "set print symbol-loading". */
132 const char print_symbol_loading_off
[] = "off";
133 const char print_symbol_loading_brief
[] = "brief";
134 const char print_symbol_loading_full
[] = "full";
135 static const char *print_symbol_loading_enums
[] =
137 print_symbol_loading_off
,
138 print_symbol_loading_brief
,
139 print_symbol_loading_full
,
142 static const char *print_symbol_loading
= print_symbol_loading_full
;
146 bool auto_solib_add
= true;
149 /* Return non-zero if symbol-loading messages should be printed.
150 FROM_TTY is the standard from_tty argument to gdb commands.
151 If EXEC is non-zero the messages are for the executable.
152 Otherwise, messages are for shared libraries.
153 If FULL is non-zero then the caller is printing a detailed message.
154 E.g., the message includes the shared library name.
155 Otherwise, the caller is printing a brief "summary" message. */
158 print_symbol_loading_p (int from_tty
, int exec
, int full
)
160 if (!from_tty
&& !info_verbose
)
165 /* We don't check FULL for executables, there are few such
166 messages, therefore brief == full. */
167 return print_symbol_loading
!= print_symbol_loading_off
;
170 return print_symbol_loading
== print_symbol_loading_full
;
171 return print_symbol_loading
== print_symbol_loading_brief
;
174 /* True if we are reading a symbol table. */
176 int currently_reading_symtab
= 0;
178 /* Increment currently_reading_symtab and return a cleanup that can be
179 used to decrement it. */
181 scoped_restore_tmpl
<int>
182 increment_reading_symtab (void)
184 gdb_assert (currently_reading_symtab
>= 0);
185 return make_scoped_restore (¤tly_reading_symtab
,
186 currently_reading_symtab
+ 1);
189 /* Remember the lowest-addressed loadable section we've seen.
190 This function is called via bfd_map_over_sections.
192 In case of equal vmas, the section with the largest size becomes the
193 lowest-addressed loadable section.
195 If the vmas and sizes are equal, the last section is considered the
196 lowest-addressed loadable section. */
199 find_lowest_section (bfd
*abfd
, asection
*sect
, void *obj
)
201 asection
**lowest
= (asection
**) obj
;
203 if (0 == (bfd_section_flags (sect
) & (SEC_ALLOC
| SEC_LOAD
)))
206 *lowest
= sect
; /* First loadable section */
207 else if (bfd_section_vma (*lowest
) > bfd_section_vma (sect
))
208 *lowest
= sect
; /* A lower loadable section */
209 else if (bfd_section_vma (*lowest
) == bfd_section_vma (sect
)
210 && (bfd_section_size (*lowest
) <= bfd_section_size (sect
)))
214 /* Build (allocate and populate) a section_addr_info struct from
215 an existing section table. */
218 build_section_addr_info_from_section_table (const struct target_section
*start
,
219 const struct target_section
*end
)
221 const struct target_section
*stp
;
223 section_addr_info sap
;
225 for (stp
= start
; stp
!= end
; stp
++)
227 struct bfd_section
*asect
= stp
->the_bfd_section
;
228 bfd
*abfd
= asect
->owner
;
230 if (bfd_section_flags (asect
) & (SEC_ALLOC
| SEC_LOAD
)
231 && sap
.size () < end
- start
)
232 sap
.emplace_back (stp
->addr
,
233 bfd_section_name (asect
),
234 gdb_bfd_section_index (abfd
, asect
));
240 /* Create a section_addr_info from section offsets in ABFD. */
242 static section_addr_info
243 build_section_addr_info_from_bfd (bfd
*abfd
)
245 struct bfd_section
*sec
;
247 section_addr_info sap
;
248 for (sec
= abfd
->sections
; sec
!= NULL
; sec
= sec
->next
)
249 if (bfd_section_flags (sec
) & (SEC_ALLOC
| SEC_LOAD
))
250 sap
.emplace_back (bfd_section_vma (sec
),
251 bfd_section_name (sec
),
252 gdb_bfd_section_index (abfd
, sec
));
257 /* Create a section_addr_info from section offsets in OBJFILE. */
260 build_section_addr_info_from_objfile (const struct objfile
*objfile
)
264 /* Before reread_symbols gets rewritten it is not safe to call:
265 gdb_assert (objfile->num_sections == bfd_count_sections (objfile->obfd));
267 section_addr_info sap
= build_section_addr_info_from_bfd (objfile
->obfd
);
268 for (i
= 0; i
< sap
.size (); i
++)
270 int sectindex
= sap
[i
].sectindex
;
272 sap
[i
].addr
+= objfile
->section_offsets
[sectindex
];
277 /* Initialize OBJFILE's sect_index_* members. */
280 init_objfile_sect_indices (struct objfile
*objfile
)
285 sect
= bfd_get_section_by_name (objfile
->obfd
, ".text");
287 objfile
->sect_index_text
= sect
->index
;
289 sect
= bfd_get_section_by_name (objfile
->obfd
, ".data");
291 objfile
->sect_index_data
= sect
->index
;
293 sect
= bfd_get_section_by_name (objfile
->obfd
, ".bss");
295 objfile
->sect_index_bss
= sect
->index
;
297 sect
= bfd_get_section_by_name (objfile
->obfd
, ".rodata");
299 objfile
->sect_index_rodata
= sect
->index
;
301 /* This is where things get really weird... We MUST have valid
302 indices for the various sect_index_* members or gdb will abort.
303 So if for example, there is no ".text" section, we have to
304 accomodate that. First, check for a file with the standard
305 one or two segments. */
307 symfile_find_segment_sections (objfile
);
309 /* Except when explicitly adding symbol files at some address,
310 section_offsets contains nothing but zeros, so it doesn't matter
311 which slot in section_offsets the individual sect_index_* members
312 index into. So if they are all zero, it is safe to just point
313 all the currently uninitialized indices to the first slot. But
314 beware: if this is the main executable, it may be relocated
315 later, e.g. by the remote qOffsets packet, and then this will
316 be wrong! That's why we try segments first. */
318 for (i
= 0; i
< objfile
->section_offsets
.size (); i
++)
320 if (objfile
->section_offsets
[i
] != 0)
325 if (i
== objfile
->section_offsets
.size ())
327 if (objfile
->sect_index_text
== -1)
328 objfile
->sect_index_text
= 0;
329 if (objfile
->sect_index_data
== -1)
330 objfile
->sect_index_data
= 0;
331 if (objfile
->sect_index_bss
== -1)
332 objfile
->sect_index_bss
= 0;
333 if (objfile
->sect_index_rodata
== -1)
334 objfile
->sect_index_rodata
= 0;
338 /* The arguments to place_section. */
340 struct place_section_arg
342 section_offsets
*offsets
;
346 /* Find a unique offset to use for loadable section SECT if
347 the user did not provide an offset. */
350 place_section (bfd
*abfd
, asection
*sect
, void *obj
)
352 struct place_section_arg
*arg
= (struct place_section_arg
*) obj
;
353 section_offsets
&offsets
= *arg
->offsets
;
354 CORE_ADDR start_addr
;
356 ULONGEST align
= ((ULONGEST
) 1) << bfd_section_alignment (sect
);
358 /* We are only interested in allocated sections. */
359 if ((bfd_section_flags (sect
) & SEC_ALLOC
) == 0)
362 /* If the user specified an offset, honor it. */
363 if (offsets
[gdb_bfd_section_index (abfd
, sect
)] != 0)
366 /* Otherwise, let's try to find a place for the section. */
367 start_addr
= (arg
->lowest
+ align
- 1) & -align
;
374 for (cur_sec
= abfd
->sections
; cur_sec
!= NULL
; cur_sec
= cur_sec
->next
)
376 int indx
= cur_sec
->index
;
378 /* We don't need to compare against ourself. */
382 /* We can only conflict with allocated sections. */
383 if ((bfd_section_flags (cur_sec
) & SEC_ALLOC
) == 0)
386 /* If the section offset is 0, either the section has not been placed
387 yet, or it was the lowest section placed (in which case LOWEST
388 will be past its end). */
389 if (offsets
[indx
] == 0)
392 /* If this section would overlap us, then we must move up. */
393 if (start_addr
+ bfd_section_size (sect
) > offsets
[indx
]
394 && start_addr
< offsets
[indx
] + bfd_section_size (cur_sec
))
396 start_addr
= offsets
[indx
] + bfd_section_size (cur_sec
);
397 start_addr
= (start_addr
+ align
- 1) & -align
;
402 /* Otherwise, we appear to be OK. So far. */
407 offsets
[gdb_bfd_section_index (abfd
, sect
)] = start_addr
;
408 arg
->lowest
= start_addr
+ bfd_section_size (sect
);
411 /* Store section_addr_info as prepared (made relative and with SECTINDEX
412 filled-in) by addr_info_make_relative into SECTION_OFFSETS. */
415 relative_addr_info_to_section_offsets (section_offsets
§ion_offsets
,
416 const section_addr_info
&addrs
)
420 section_offsets
.assign (section_offsets
.size (), 0);
422 /* Now calculate offsets for section that were specified by the caller. */
423 for (i
= 0; i
< addrs
.size (); i
++)
425 const struct other_sections
*osp
;
428 if (osp
->sectindex
== -1)
431 /* Record all sections in offsets. */
432 /* The section_offsets in the objfile are here filled in using
434 section_offsets
[osp
->sectindex
] = osp
->addr
;
438 /* Transform section name S for a name comparison. prelink can split section
439 `.bss' into two sections `.dynbss' and `.bss' (in this order). Similarly
440 prelink can split `.sbss' into `.sdynbss' and `.sbss'. Use virtual address
441 of the new `.dynbss' (`.sdynbss') section as the adjacent new `.bss'
442 (`.sbss') section has invalid (increased) virtual address. */
445 addr_section_name (const char *s
)
447 if (strcmp (s
, ".dynbss") == 0)
449 if (strcmp (s
, ".sdynbss") == 0)
455 /* std::sort comparator for addrs_section_sort. Sort entries in
456 ascending order by their (name, sectindex) pair. sectindex makes
457 the sort by name stable. */
460 addrs_section_compar (const struct other_sections
*a
,
461 const struct other_sections
*b
)
465 retval
= strcmp (addr_section_name (a
->name
.c_str ()),
466 addr_section_name (b
->name
.c_str ()));
470 return a
->sectindex
< b
->sectindex
;
473 /* Provide sorted array of pointers to sections of ADDRS. */
475 static std::vector
<const struct other_sections
*>
476 addrs_section_sort (const section_addr_info
&addrs
)
480 std::vector
<const struct other_sections
*> array (addrs
.size ());
481 for (i
= 0; i
< addrs
.size (); i
++)
482 array
[i
] = &addrs
[i
];
484 std::sort (array
.begin (), array
.end (), addrs_section_compar
);
489 /* Relativize absolute addresses in ADDRS into offsets based on ABFD. Fill-in
490 also SECTINDEXes specific to ABFD there. This function can be used to
491 rebase ADDRS to start referencing different BFD than before. */
494 addr_info_make_relative (section_addr_info
*addrs
, bfd
*abfd
)
496 asection
*lower_sect
;
497 CORE_ADDR lower_offset
;
500 /* Find lowest loadable section to be used as starting point for
501 contiguous sections. */
503 bfd_map_over_sections (abfd
, find_lowest_section
, &lower_sect
);
504 if (lower_sect
== NULL
)
506 warning (_("no loadable sections found in added symbol-file %s"),
507 bfd_get_filename (abfd
));
511 lower_offset
= bfd_section_vma (lower_sect
);
513 /* Create ADDRS_TO_ABFD_ADDRS array to map the sections in ADDRS to sections
514 in ABFD. Section names are not unique - there can be multiple sections of
515 the same name. Also the sections of the same name do not have to be
516 adjacent to each other. Some sections may be present only in one of the
517 files. Even sections present in both files do not have to be in the same
520 Use stable sort by name for the sections in both files. Then linearly
521 scan both lists matching as most of the entries as possible. */
523 std::vector
<const struct other_sections
*> addrs_sorted
524 = addrs_section_sort (*addrs
);
526 section_addr_info abfd_addrs
= build_section_addr_info_from_bfd (abfd
);
527 std::vector
<const struct other_sections
*> abfd_addrs_sorted
528 = addrs_section_sort (abfd_addrs
);
530 /* Now create ADDRS_TO_ABFD_ADDRS from ADDRS_SORTED and
531 ABFD_ADDRS_SORTED. */
533 std::vector
<const struct other_sections
*>
534 addrs_to_abfd_addrs (addrs
->size (), nullptr);
536 std::vector
<const struct other_sections
*>::iterator abfd_sorted_iter
537 = abfd_addrs_sorted
.begin ();
538 for (const other_sections
*sect
: addrs_sorted
)
540 const char *sect_name
= addr_section_name (sect
->name
.c_str ());
542 while (abfd_sorted_iter
!= abfd_addrs_sorted
.end ()
543 && strcmp (addr_section_name ((*abfd_sorted_iter
)->name
.c_str ()),
547 if (abfd_sorted_iter
!= abfd_addrs_sorted
.end ()
548 && strcmp (addr_section_name ((*abfd_sorted_iter
)->name
.c_str ()),
553 /* Make the found item directly addressable from ADDRS. */
554 index_in_addrs
= sect
- addrs
->data ();
555 gdb_assert (addrs_to_abfd_addrs
[index_in_addrs
] == NULL
);
556 addrs_to_abfd_addrs
[index_in_addrs
] = *abfd_sorted_iter
;
558 /* Never use the same ABFD entry twice. */
563 /* Calculate offsets for the loadable sections.
564 FIXME! Sections must be in order of increasing loadable section
565 so that contiguous sections can use the lower-offset!!!
567 Adjust offsets if the segments are not contiguous.
568 If the section is contiguous, its offset should be set to
569 the offset of the highest loadable section lower than it
570 (the loadable section directly below it in memory).
571 this_offset = lower_offset = lower_addr - lower_orig_addr */
573 for (i
= 0; i
< addrs
->size (); i
++)
575 const struct other_sections
*sect
= addrs_to_abfd_addrs
[i
];
579 /* This is the index used by BFD. */
580 (*addrs
)[i
].sectindex
= sect
->sectindex
;
582 if ((*addrs
)[i
].addr
!= 0)
584 (*addrs
)[i
].addr
-= sect
->addr
;
585 lower_offset
= (*addrs
)[i
].addr
;
588 (*addrs
)[i
].addr
= lower_offset
;
592 /* addr_section_name transformation is not used for SECT_NAME. */
593 const std::string
§_name
= (*addrs
)[i
].name
;
595 /* This section does not exist in ABFD, which is normally
596 unexpected and we want to issue a warning.
598 However, the ELF prelinker does create a few sections which are
599 marked in the main executable as loadable (they are loaded in
600 memory from the DYNAMIC segment) and yet are not present in
601 separate debug info files. This is fine, and should not cause
602 a warning. Shared libraries contain just the section
603 ".gnu.liblist" but it is not marked as loadable there. There is
604 no other way to identify them than by their name as the sections
605 created by prelink have no special flags.
607 For the sections `.bss' and `.sbss' see addr_section_name. */
609 if (!(sect_name
== ".gnu.liblist"
610 || sect_name
== ".gnu.conflict"
611 || (sect_name
== ".bss"
613 && (*addrs
)[i
- 1].name
== ".dynbss"
614 && addrs_to_abfd_addrs
[i
- 1] != NULL
)
615 || (sect_name
== ".sbss"
617 && (*addrs
)[i
- 1].name
== ".sdynbss"
618 && addrs_to_abfd_addrs
[i
- 1] != NULL
)))
619 warning (_("section %s not found in %s"), sect_name
.c_str (),
620 bfd_get_filename (abfd
));
622 (*addrs
)[i
].addr
= 0;
623 (*addrs
)[i
].sectindex
= -1;
628 /* Parse the user's idea of an offset for dynamic linking, into our idea
629 of how to represent it for fast symbol reading. This is the default
630 version of the sym_fns.sym_offsets function for symbol readers that
631 don't need to do anything special. It allocates a section_offsets table
632 for the objectfile OBJFILE and stuffs ADDR into all of the offsets. */
635 default_symfile_offsets (struct objfile
*objfile
,
636 const section_addr_info
&addrs
)
638 objfile
->section_offsets
.resize (gdb_bfd_count_sections (objfile
->obfd
));
639 relative_addr_info_to_section_offsets (objfile
->section_offsets
, addrs
);
641 /* For relocatable files, all loadable sections will start at zero.
642 The zero is meaningless, so try to pick arbitrary addresses such
643 that no loadable sections overlap. This algorithm is quadratic,
644 but the number of sections in a single object file is generally
646 if ((bfd_get_file_flags (objfile
->obfd
) & (EXEC_P
| DYNAMIC
)) == 0)
648 struct place_section_arg arg
;
649 bfd
*abfd
= objfile
->obfd
;
652 for (cur_sec
= abfd
->sections
; cur_sec
!= NULL
; cur_sec
= cur_sec
->next
)
653 /* We do not expect this to happen; just skip this step if the
654 relocatable file has a section with an assigned VMA. */
655 if (bfd_section_vma (cur_sec
) != 0)
660 section_offsets
&offsets
= objfile
->section_offsets
;
662 /* Pick non-overlapping offsets for sections the user did not
664 arg
.offsets
= &objfile
->section_offsets
;
666 bfd_map_over_sections (objfile
->obfd
, place_section
, &arg
);
668 /* Correctly filling in the section offsets is not quite
669 enough. Relocatable files have two properties that
670 (most) shared objects do not:
672 - Their debug information will contain relocations. Some
673 shared libraries do also, but many do not, so this can not
676 - If there are multiple code sections they will be loaded
677 at different relative addresses in memory than they are
678 in the objfile, since all sections in the file will start
681 Because GDB has very limited ability to map from an
682 address in debug info to the correct code section,
683 it relies on adding SECT_OFF_TEXT to things which might be
684 code. If we clear all the section offsets, and set the
685 section VMAs instead, then symfile_relocate_debug_section
686 will return meaningful debug information pointing at the
689 GDB has too many different data structures for section
690 addresses - a bfd, objfile, and so_list all have section
691 tables, as does exec_ops. Some of these could probably
694 for (cur_sec
= abfd
->sections
; cur_sec
!= NULL
;
695 cur_sec
= cur_sec
->next
)
697 if ((bfd_section_flags (cur_sec
) & SEC_ALLOC
) == 0)
700 bfd_set_section_vma (cur_sec
, offsets
[cur_sec
->index
]);
701 exec_set_section_address (bfd_get_filename (abfd
),
703 offsets
[cur_sec
->index
]);
704 offsets
[cur_sec
->index
] = 0;
709 /* Remember the bfd indexes for the .text, .data, .bss and
711 init_objfile_sect_indices (objfile
);
714 /* Divide the file into segments, which are individual relocatable units.
715 This is the default version of the sym_fns.sym_segments function for
716 symbol readers that do not have an explicit representation of segments.
717 It assumes that object files do not have segments, and fully linked
718 files have a single segment. */
720 symfile_segment_data_up
721 default_symfile_segments (bfd
*abfd
)
727 /* Relocatable files contain enough information to position each
728 loadable section independently; they should not be relocated
730 if ((bfd_get_file_flags (abfd
) & (EXEC_P
| DYNAMIC
)) == 0)
733 /* Make sure there is at least one loadable section in the file. */
734 for (sect
= abfd
->sections
; sect
!= NULL
; sect
= sect
->next
)
736 if ((bfd_section_flags (sect
) & SEC_ALLOC
) == 0)
744 low
= bfd_section_vma (sect
);
745 high
= low
+ bfd_section_size (sect
);
747 symfile_segment_data_up
data (new symfile_segment_data
);
748 data
->num_segments
= 1;
749 data
->segment_bases
= XCNEW (CORE_ADDR
);
750 data
->segment_sizes
= XCNEW (CORE_ADDR
);
752 num_sections
= bfd_count_sections (abfd
);
753 data
->segment_info
= XCNEWVEC (int, num_sections
);
755 for (i
= 0, sect
= abfd
->sections
; sect
!= NULL
; i
++, sect
= sect
->next
)
759 if ((bfd_section_flags (sect
) & SEC_ALLOC
) == 0)
762 vma
= bfd_section_vma (sect
);
765 if (vma
+ bfd_section_size (sect
) > high
)
766 high
= vma
+ bfd_section_size (sect
);
768 data
->segment_info
[i
] = 1;
771 data
->segment_bases
[0] = low
;
772 data
->segment_sizes
[0] = high
- low
;
777 /* This is a convenience function to call sym_read for OBJFILE and
778 possibly force the partial symbols to be read. */
781 read_symbols (struct objfile
*objfile
, symfile_add_flags add_flags
)
783 (*objfile
->sf
->sym_read
) (objfile
, add_flags
);
784 objfile
->per_bfd
->minsyms_read
= true;
786 /* find_separate_debug_file_in_section should be called only if there is
787 single binary with no existing separate debug info file. */
788 if (!objfile_has_partial_symbols (objfile
)
789 && objfile
->separate_debug_objfile
== NULL
790 && objfile
->separate_debug_objfile_backlink
== NULL
)
792 gdb_bfd_ref_ptr
abfd (find_separate_debug_file_in_section (objfile
));
796 /* find_separate_debug_file_in_section uses the same filename for the
797 virtual section-as-bfd like the bfd filename containing the
798 section. Therefore use also non-canonical name form for the same
799 file containing the section. */
800 symbol_file_add_separate (abfd
.get (),
801 bfd_get_filename (abfd
.get ()),
802 add_flags
| SYMFILE_NOT_FILENAME
, objfile
);
805 if ((add_flags
& SYMFILE_NO_READ
) == 0)
806 require_partial_symbols (objfile
, false);
809 /* Initialize entry point information for this objfile. */
812 init_entry_point_info (struct objfile
*objfile
)
814 struct entry_info
*ei
= &objfile
->per_bfd
->ei
;
820 /* Save startup file's range of PC addresses to help blockframe.c
821 decide where the bottom of the stack is. */
823 if (bfd_get_file_flags (objfile
->obfd
) & EXEC_P
)
825 /* Executable file -- record its entry point so we'll recognize
826 the startup file because it contains the entry point. */
827 ei
->entry_point
= bfd_get_start_address (objfile
->obfd
);
828 ei
->entry_point_p
= 1;
830 else if (bfd_get_file_flags (objfile
->obfd
) & DYNAMIC
831 && bfd_get_start_address (objfile
->obfd
) != 0)
833 /* Some shared libraries may have entry points set and be
834 runnable. There's no clear way to indicate this, so just check
835 for values other than zero. */
836 ei
->entry_point
= bfd_get_start_address (objfile
->obfd
);
837 ei
->entry_point_p
= 1;
841 /* Examination of non-executable.o files. Short-circuit this stuff. */
842 ei
->entry_point_p
= 0;
845 if (ei
->entry_point_p
)
847 struct obj_section
*osect
;
848 CORE_ADDR entry_point
= ei
->entry_point
;
851 /* Make certain that the address points at real code, and not a
852 function descriptor. */
854 = gdbarch_convert_from_func_ptr_addr (objfile
->arch (),
856 current_top_target ());
858 /* Remove any ISA markers, so that this matches entries in the
861 = gdbarch_addr_bits_remove (objfile
->arch (), entry_point
);
864 ALL_OBJFILE_OSECTIONS (objfile
, osect
)
866 struct bfd_section
*sect
= osect
->the_bfd_section
;
868 if (entry_point
>= bfd_section_vma (sect
)
869 && entry_point
< (bfd_section_vma (sect
)
870 + bfd_section_size (sect
)))
872 ei
->the_bfd_section_index
873 = gdb_bfd_section_index (objfile
->obfd
, sect
);
880 ei
->the_bfd_section_index
= SECT_OFF_TEXT (objfile
);
884 /* Process a symbol file, as either the main file or as a dynamically
887 This function does not set the OBJFILE's entry-point info.
889 OBJFILE is where the symbols are to be read from.
891 ADDRS is the list of section load addresses. If the user has given
892 an 'add-symbol-file' command, then this is the list of offsets and
893 addresses he or she provided as arguments to the command; or, if
894 we're handling a shared library, these are the actual addresses the
895 sections are loaded at, according to the inferior's dynamic linker
896 (as gleaned by GDB's shared library code). We convert each address
897 into an offset from the section VMA's as it appears in the object
898 file, and then call the file's sym_offsets function to convert this
899 into a format-specific offset table --- a `section_offsets'.
900 The sectindex field is used to control the ordering of sections
901 with the same name. Upon return, it is updated to contain the
902 corresponding BFD section index, or -1 if the section was not found.
904 ADD_FLAGS encodes verbosity level, whether this is main symbol or
905 an extra symbol file such as dynamically loaded code, and whether
906 breakpoint reset should be deferred. */
909 syms_from_objfile_1 (struct objfile
*objfile
,
910 section_addr_info
*addrs
,
911 symfile_add_flags add_flags
)
913 section_addr_info local_addr
;
914 const int mainline
= add_flags
& SYMFILE_MAINLINE
;
916 objfile_set_sym_fns (objfile
, find_sym_fns (objfile
->obfd
));
918 if (objfile
->sf
== NULL
)
920 /* No symbols to load, but we still need to make sure
921 that the section_offsets table is allocated. */
922 int num_sections
= gdb_bfd_count_sections (objfile
->obfd
);
924 objfile
->section_offsets
.assign (num_sections
, 0);
928 /* Make sure that partially constructed symbol tables will be cleaned up
929 if an error occurs during symbol reading. */
930 gdb::optional
<clear_symtab_users_cleanup
> defer_clear_users
;
932 objfile_up
objfile_holder (objfile
);
934 /* If ADDRS is NULL, put together a dummy address list.
935 We now establish the convention that an addr of zero means
936 no load address was specified. */
942 /* We will modify the main symbol table, make sure that all its users
943 will be cleaned up if an error occurs during symbol reading. */
944 defer_clear_users
.emplace ((symfile_add_flag
) 0);
946 /* Since no error yet, throw away the old symbol table. */
948 if (symfile_objfile
!= NULL
)
950 symfile_objfile
->unlink ();
951 gdb_assert (symfile_objfile
== NULL
);
954 /* Currently we keep symbols from the add-symbol-file command.
955 If the user wants to get rid of them, they should do "symbol-file"
956 without arguments first. Not sure this is the best behavior
959 (*objfile
->sf
->sym_new_init
) (objfile
);
962 /* Convert addr into an offset rather than an absolute address.
963 We find the lowest address of a loaded segment in the objfile,
964 and assume that <addr> is where that got loaded.
966 We no longer warn if the lowest section is not a text segment (as
967 happens for the PA64 port. */
968 if (addrs
->size () > 0)
969 addr_info_make_relative (addrs
, objfile
->obfd
);
971 /* Initialize symbol reading routines for this objfile, allow complaints to
972 appear for this new file, and record how verbose to be, then do the
973 initial symbol reading for this file. */
975 (*objfile
->sf
->sym_init
) (objfile
);
978 (*objfile
->sf
->sym_offsets
) (objfile
, *addrs
);
980 read_symbols (objfile
, add_flags
);
982 /* Discard cleanups as symbol reading was successful. */
984 objfile_holder
.release ();
985 if (defer_clear_users
)
986 defer_clear_users
->release ();
989 /* Same as syms_from_objfile_1, but also initializes the objfile
993 syms_from_objfile (struct objfile
*objfile
,
994 section_addr_info
*addrs
,
995 symfile_add_flags add_flags
)
997 syms_from_objfile_1 (objfile
, addrs
, add_flags
);
998 init_entry_point_info (objfile
);
1001 /* Perform required actions after either reading in the initial
1002 symbols for a new objfile, or mapping in the symbols from a reusable
1003 objfile. ADD_FLAGS is a bitmask of enum symfile_add_flags. */
1006 finish_new_objfile (struct objfile
*objfile
, symfile_add_flags add_flags
)
1008 /* If this is the main symbol file we have to clean up all users of the
1009 old main symbol file. Otherwise it is sufficient to fixup all the
1010 breakpoints that may have been redefined by this symbol file. */
1011 if (add_flags
& SYMFILE_MAINLINE
)
1013 /* OK, make it the "real" symbol file. */
1014 symfile_objfile
= objfile
;
1016 clear_symtab_users (add_flags
);
1018 else if ((add_flags
& SYMFILE_DEFER_BP_RESET
) == 0)
1020 breakpoint_re_set ();
1023 /* We're done reading the symbol file; finish off complaints. */
1024 clear_complaints ();
1027 /* Process a symbol file, as either the main file or as a dynamically
1030 ABFD is a BFD already open on the file, as from symfile_bfd_open.
1031 A new reference is acquired by this function.
1033 For NAME description see the objfile constructor.
1035 ADD_FLAGS encodes verbosity, whether this is main symbol file or
1036 extra, such as dynamically loaded code, and what to do with breakpoints.
1038 ADDRS is as described for syms_from_objfile_1, above.
1039 ADDRS is ignored when SYMFILE_MAINLINE bit is set in ADD_FLAGS.
1041 PARENT is the original objfile if ABFD is a separate debug info file.
1042 Otherwise PARENT is NULL.
1044 Upon success, returns a pointer to the objfile that was added.
1045 Upon failure, jumps back to command level (never returns). */
1047 static struct objfile
*
1048 symbol_file_add_with_addrs (bfd
*abfd
, const char *name
,
1049 symfile_add_flags add_flags
,
1050 section_addr_info
*addrs
,
1051 objfile_flags flags
, struct objfile
*parent
)
1053 struct objfile
*objfile
;
1054 const int from_tty
= add_flags
& SYMFILE_VERBOSE
;
1055 const int mainline
= add_flags
& SYMFILE_MAINLINE
;
1056 const int should_print
= (print_symbol_loading_p (from_tty
, mainline
, 1)
1057 && (readnow_symbol_files
1058 || (add_flags
& SYMFILE_NO_READ
) == 0));
1060 if (readnow_symbol_files
)
1062 flags
|= OBJF_READNOW
;
1063 add_flags
&= ~SYMFILE_NO_READ
;
1065 else if (readnever_symbol_files
1066 || (parent
!= NULL
&& (parent
->flags
& OBJF_READNEVER
)))
1068 flags
|= OBJF_READNEVER
;
1069 add_flags
|= SYMFILE_NO_READ
;
1071 if ((add_flags
& SYMFILE_NOT_FILENAME
) != 0)
1072 flags
|= OBJF_NOT_FILENAME
;
1074 /* Give user a chance to burp if we'd be
1075 interactively wiping out any existing symbols. */
1077 if ((have_full_symbols () || have_partial_symbols ())
1080 && !query (_("Load new symbol table from \"%s\"? "), name
))
1081 error (_("Not confirmed."));
1084 flags
|= OBJF_MAINLINE
;
1085 objfile
= objfile::make (abfd
, name
, flags
, parent
);
1087 /* We either created a new mapped symbol table, mapped an existing
1088 symbol table file which has not had initial symbol reading
1089 performed, or need to read an unmapped symbol table. */
1092 if (deprecated_pre_add_symbol_hook
)
1093 deprecated_pre_add_symbol_hook (name
);
1095 printf_filtered (_("Reading symbols from %ps...\n"),
1096 styled_string (file_name_style
.style (), name
));
1098 syms_from_objfile (objfile
, addrs
, add_flags
);
1100 /* We now have at least a partial symbol table. Check to see if the
1101 user requested that all symbols be read on initial access via either
1102 the gdb startup command line or on a per symbol file basis. Expand
1103 all partial symbol tables for this objfile if so. */
1105 if ((flags
& OBJF_READNOW
))
1108 printf_filtered (_("Expanding full symbols from %ps...\n"),
1109 styled_string (file_name_style
.style (), name
));
1112 objfile
->sf
->qf
->expand_all_symtabs (objfile
);
1115 /* Note that we only print a message if we have no symbols and have
1116 no separate debug file. If there is a separate debug file which
1117 does not have symbols, we'll have emitted this message for that
1118 file, and so printing it twice is just redundant. */
1119 if (should_print
&& !objfile_has_symbols (objfile
)
1120 && objfile
->separate_debug_objfile
== nullptr)
1121 printf_filtered (_("(No debugging symbols found in %ps)\n"),
1122 styled_string (file_name_style
.style (), name
));
1126 if (deprecated_post_add_symbol_hook
)
1127 deprecated_post_add_symbol_hook ();
1130 /* We print some messages regardless of whether 'from_tty ||
1131 info_verbose' is true, so make sure they go out at the right
1133 gdb_flush (gdb_stdout
);
1135 if (objfile
->sf
== NULL
)
1137 gdb::observers::new_objfile
.notify (objfile
);
1138 return objfile
; /* No symbols. */
1141 finish_new_objfile (objfile
, add_flags
);
1143 gdb::observers::new_objfile
.notify (objfile
);
1145 bfd_cache_close_all ();
1149 /* Add BFD as a separate debug file for OBJFILE. For NAME description
1150 see the objfile constructor. */
1153 symbol_file_add_separate (bfd
*bfd
, const char *name
,
1154 symfile_add_flags symfile_flags
,
1155 struct objfile
*objfile
)
1157 /* Create section_addr_info. We can't directly use offsets from OBJFILE
1158 because sections of BFD may not match sections of OBJFILE and because
1159 vma may have been modified by tools such as prelink. */
1160 section_addr_info sap
= build_section_addr_info_from_objfile (objfile
);
1162 symbol_file_add_with_addrs
1163 (bfd
, name
, symfile_flags
, &sap
,
1164 objfile
->flags
& (OBJF_REORDERED
| OBJF_SHARED
| OBJF_READNOW
1165 | OBJF_USERLOADED
| OBJF_MAINLINE
),
1169 /* Process the symbol file ABFD, as either the main file or as a
1170 dynamically loaded file.
1171 See symbol_file_add_with_addrs's comments for details. */
1174 symbol_file_add_from_bfd (bfd
*abfd
, const char *name
,
1175 symfile_add_flags add_flags
,
1176 section_addr_info
*addrs
,
1177 objfile_flags flags
, struct objfile
*parent
)
1179 return symbol_file_add_with_addrs (abfd
, name
, add_flags
, addrs
, flags
,
1183 /* Process a symbol file, as either the main file or as a dynamically
1184 loaded file. See symbol_file_add_with_addrs's comments for details. */
1187 symbol_file_add (const char *name
, symfile_add_flags add_flags
,
1188 section_addr_info
*addrs
, objfile_flags flags
)
1190 gdb_bfd_ref_ptr
bfd (symfile_bfd_open (name
));
1192 return symbol_file_add_from_bfd (bfd
.get (), name
, add_flags
, addrs
,
1196 /* Call symbol_file_add() with default values and update whatever is
1197 affected by the loading of a new main().
1198 Used when the file is supplied in the gdb command line
1199 and by some targets with special loading requirements.
1200 The auxiliary function, symbol_file_add_main_1(), has the flags
1201 argument for the switches that can only be specified in the symbol_file
1205 symbol_file_add_main (const char *args
, symfile_add_flags add_flags
)
1207 symbol_file_add_main_1 (args
, add_flags
, 0, 0);
1211 symbol_file_add_main_1 (const char *args
, symfile_add_flags add_flags
,
1212 objfile_flags flags
, CORE_ADDR reloff
)
1214 add_flags
|= current_inferior ()->symfile_flags
| SYMFILE_MAINLINE
;
1216 struct objfile
*objfile
= symbol_file_add (args
, add_flags
, NULL
, flags
);
1218 objfile_rebase (objfile
, reloff
);
1220 /* Getting new symbols may change our opinion about
1221 what is frameless. */
1222 reinit_frame_cache ();
1224 if ((add_flags
& SYMFILE_NO_READ
) == 0)
1225 set_initial_language ();
1229 symbol_file_clear (int from_tty
)
1231 if ((have_full_symbols () || have_partial_symbols ())
1234 ? !query (_("Discard symbol table from `%s'? "),
1235 objfile_name (symfile_objfile
))
1236 : !query (_("Discard symbol table? "))))
1237 error (_("Not confirmed."));
1239 /* solib descriptors may have handles to objfiles. Wipe them before their
1240 objfiles get stale by free_all_objfiles. */
1241 no_shared_libraries (NULL
, from_tty
);
1243 current_program_space
->free_all_objfiles ();
1245 clear_symtab_users (0);
1247 gdb_assert (symfile_objfile
== NULL
);
1249 printf_filtered (_("No symbol file now.\n"));
1252 /* See symfile.h. */
1254 bool separate_debug_file_debug
= false;
1257 separate_debug_file_exists (const std::string
&name
, unsigned long crc
,
1258 struct objfile
*parent_objfile
)
1260 unsigned long file_crc
;
1262 struct stat parent_stat
, abfd_stat
;
1263 int verified_as_different
;
1265 /* Find a separate debug info file as if symbols would be present in
1266 PARENT_OBJFILE itself this function would not be called. .gnu_debuglink
1267 section can contain just the basename of PARENT_OBJFILE without any
1268 ".debug" suffix as "/usr/lib/debug/path/to/file" is a separate tree where
1269 the separate debug infos with the same basename can exist. */
1271 if (filename_cmp (name
.c_str (), objfile_name (parent_objfile
)) == 0)
1274 if (separate_debug_file_debug
)
1276 printf_filtered (_(" Trying %s..."), name
.c_str ());
1277 gdb_flush (gdb_stdout
);
1280 gdb_bfd_ref_ptr
abfd (gdb_bfd_open (name
.c_str (), gnutarget
, -1));
1284 if (separate_debug_file_debug
)
1285 printf_filtered (_(" no, unable to open.\n"));
1290 /* Verify symlinks were not the cause of filename_cmp name difference above.
1292 Some operating systems, e.g. Windows, do not provide a meaningful
1293 st_ino; they always set it to zero. (Windows does provide a
1294 meaningful st_dev.) Files accessed from gdbservers that do not
1295 support the vFile:fstat packet will also have st_ino set to zero.
1296 Do not indicate a duplicate library in either case. While there
1297 is no guarantee that a system that provides meaningful inode
1298 numbers will never set st_ino to zero, this is merely an
1299 optimization, so we do not need to worry about false negatives. */
1301 if (bfd_stat (abfd
.get (), &abfd_stat
) == 0
1302 && abfd_stat
.st_ino
!= 0
1303 && bfd_stat (parent_objfile
->obfd
, &parent_stat
) == 0)
1305 if (abfd_stat
.st_dev
== parent_stat
.st_dev
1306 && abfd_stat
.st_ino
== parent_stat
.st_ino
)
1308 if (separate_debug_file_debug
)
1309 printf_filtered (_(" no, same file as the objfile.\n"));
1313 verified_as_different
= 1;
1316 verified_as_different
= 0;
1318 file_crc_p
= gdb_bfd_crc (abfd
.get (), &file_crc
);
1322 if (separate_debug_file_debug
)
1323 printf_filtered (_(" no, error computing CRC.\n"));
1328 if (crc
!= file_crc
)
1330 unsigned long parent_crc
;
1332 /* If the files could not be verified as different with
1333 bfd_stat then we need to calculate the parent's CRC
1334 to verify whether the files are different or not. */
1336 if (!verified_as_different
)
1338 if (!gdb_bfd_crc (parent_objfile
->obfd
, &parent_crc
))
1340 if (separate_debug_file_debug
)
1341 printf_filtered (_(" no, error computing CRC.\n"));
1347 if (verified_as_different
|| parent_crc
!= file_crc
)
1348 warning (_("the debug information found in \"%s\""
1349 " does not match \"%s\" (CRC mismatch).\n"),
1350 name
.c_str (), objfile_name (parent_objfile
));
1352 if (separate_debug_file_debug
)
1353 printf_filtered (_(" no, CRC doesn't match.\n"));
1358 if (separate_debug_file_debug
)
1359 printf_filtered (_(" yes!\n"));
1364 char *debug_file_directory
= NULL
;
1366 show_debug_file_directory (struct ui_file
*file
, int from_tty
,
1367 struct cmd_list_element
*c
, const char *value
)
1369 fprintf_filtered (file
,
1370 _("The directory where separate debug "
1371 "symbols are searched for is \"%s\".\n"),
1375 #if ! defined (DEBUG_SUBDIRECTORY)
1376 #define DEBUG_SUBDIRECTORY ".debug"
1379 /* Find a separate debuginfo file for OBJFILE, using DIR as the directory
1380 where the original file resides (may not be the same as
1381 dirname(objfile->name) due to symlinks), and DEBUGLINK as the file we are
1382 looking for. CANON_DIR is the "realpath" form of DIR.
1383 DIR must contain a trailing '/'.
1384 Returns the path of the file with separate debug info, or an empty
1388 find_separate_debug_file (const char *dir
,
1389 const char *canon_dir
,
1390 const char *debuglink
,
1391 unsigned long crc32
, struct objfile
*objfile
)
1393 if (separate_debug_file_debug
)
1394 printf_filtered (_("\nLooking for separate debug info (debug link) for "
1395 "%s\n"), objfile_name (objfile
));
1397 /* First try in the same directory as the original file. */
1398 std::string debugfile
= dir
;
1399 debugfile
+= debuglink
;
1401 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1404 /* Then try in the subdirectory named DEBUG_SUBDIRECTORY. */
1406 debugfile
+= DEBUG_SUBDIRECTORY
;
1408 debugfile
+= debuglink
;
1410 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1413 /* Then try in the global debugfile directories.
1415 Keep backward compatibility so that DEBUG_FILE_DIRECTORY being "" will
1416 cause "/..." lookups. */
1418 bool target_prefix
= startswith (dir
, "target:");
1419 const char *dir_notarget
= target_prefix
? dir
+ strlen ("target:") : dir
;
1420 std::vector
<gdb::unique_xmalloc_ptr
<char>> debugdir_vec
1421 = dirnames_to_char_ptr_vec (debug_file_directory
);
1422 gdb::unique_xmalloc_ptr
<char> canon_sysroot
= gdb_realpath (gdb_sysroot
);
1424 /* MS-Windows/MS-DOS don't allow colons in file names; we must
1425 convert the drive letter into a one-letter directory, so that the
1426 file name resulting from splicing below will be valid.
1428 FIXME: The below only works when GDB runs on MS-Windows/MS-DOS.
1429 There are various remote-debugging scenarios where such a
1430 transformation of the drive letter might be required when GDB runs
1431 on a Posix host, see
1433 https://sourceware.org/ml/gdb-patches/2019-04/msg00605.html
1435 If some of those scenarios need to be supported, we will need to
1436 use a different condition for HAS_DRIVE_SPEC and a different macro
1437 instead of STRIP_DRIVE_SPEC, which work on Posix systems as well. */
1439 if (HAS_DRIVE_SPEC (dir_notarget
))
1441 drive
= dir_notarget
[0];
1442 dir_notarget
= STRIP_DRIVE_SPEC (dir_notarget
);
1445 for (const gdb::unique_xmalloc_ptr
<char> &debugdir
: debugdir_vec
)
1447 debugfile
= target_prefix
? "target:" : "";
1448 debugfile
+= debugdir
.get ();
1451 debugfile
+= dir_notarget
;
1452 debugfile
+= debuglink
;
1454 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1457 const char *base_path
= NULL
;
1458 if (canon_dir
!= NULL
)
1460 if (canon_sysroot
.get () != NULL
)
1461 base_path
= child_path (canon_sysroot
.get (), canon_dir
);
1463 base_path
= child_path (gdb_sysroot
, canon_dir
);
1465 if (base_path
!= NULL
)
1467 /* If the file is in the sysroot, try using its base path in
1468 the global debugfile directory. */
1469 debugfile
= target_prefix
? "target:" : "";
1470 debugfile
+= debugdir
.get ();
1472 debugfile
+= base_path
;
1474 debugfile
+= debuglink
;
1476 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1479 /* If the file is in the sysroot, try using its base path in
1480 the sysroot's global debugfile directory. */
1481 debugfile
= target_prefix
? "target:" : "";
1482 debugfile
+= gdb_sysroot
;
1483 debugfile
+= debugdir
.get ();
1485 debugfile
+= base_path
;
1487 debugfile
+= debuglink
;
1489 if (separate_debug_file_exists (debugfile
, crc32
, objfile
))
1495 return std::string ();
1498 /* Modify PATH to contain only "[/]directory/" part of PATH.
1499 If there were no directory separators in PATH, PATH will be empty
1500 string on return. */
1503 terminate_after_last_dir_separator (char *path
)
1507 /* Strip off the final filename part, leaving the directory name,
1508 followed by a slash. The directory can be relative or absolute. */
1509 for (i
= strlen(path
) - 1; i
>= 0; i
--)
1510 if (IS_DIR_SEPARATOR (path
[i
]))
1513 /* If I is -1 then no directory is present there and DIR will be "". */
1517 /* Find separate debuginfo for OBJFILE (using .gnu_debuglink section).
1518 Returns pathname, or an empty string. */
1521 find_separate_debug_file_by_debuglink (struct objfile
*objfile
)
1523 unsigned long crc32
;
1525 gdb::unique_xmalloc_ptr
<char> debuglink
1526 (bfd_get_debug_link_info (objfile
->obfd
, &crc32
));
1528 if (debuglink
== NULL
)
1530 /* There's no separate debug info, hence there's no way we could
1531 load it => no warning. */
1532 return std::string ();
1535 std::string dir
= objfile_name (objfile
);
1536 terminate_after_last_dir_separator (&dir
[0]);
1537 gdb::unique_xmalloc_ptr
<char> canon_dir (lrealpath (dir
.c_str ()));
1539 std::string debugfile
1540 = find_separate_debug_file (dir
.c_str (), canon_dir
.get (),
1541 debuglink
.get (), crc32
, objfile
);
1543 if (debugfile
.empty ())
1545 /* For PR gdb/9538, try again with realpath (if different from the
1550 if (lstat (objfile_name (objfile
), &st_buf
) == 0
1551 && S_ISLNK (st_buf
.st_mode
))
1553 gdb::unique_xmalloc_ptr
<char> symlink_dir
1554 (lrealpath (objfile_name (objfile
)));
1555 if (symlink_dir
!= NULL
)
1557 terminate_after_last_dir_separator (symlink_dir
.get ());
1558 if (dir
!= symlink_dir
.get ())
1560 /* Different directory, so try using it. */
1561 debugfile
= find_separate_debug_file (symlink_dir
.get (),
1574 /* Make sure that OBJF_{READNOW,READNEVER} are not set
1578 validate_readnow_readnever (objfile_flags flags
)
1580 if ((flags
& OBJF_READNOW
) && (flags
& OBJF_READNEVER
))
1581 error (_("-readnow and -readnever cannot be used simultaneously"));
1584 /* This is the symbol-file command. Read the file, analyze its
1585 symbols, and add a struct symtab to a symtab list. The syntax of
1586 the command is rather bizarre:
1588 1. The function buildargv implements various quoting conventions
1589 which are undocumented and have little or nothing in common with
1590 the way things are quoted (or not quoted) elsewhere in GDB.
1592 2. Options are used, which are not generally used in GDB (perhaps
1593 "set mapped on", "set readnow on" would be better)
1595 3. The order of options matters, which is contrary to GNU
1596 conventions (because it is confusing and inconvenient). */
1599 symbol_file_command (const char *args
, int from_tty
)
1605 symbol_file_clear (from_tty
);
1609 objfile_flags flags
= OBJF_USERLOADED
;
1610 symfile_add_flags add_flags
= 0;
1612 bool stop_processing_options
= false;
1613 CORE_ADDR offset
= 0;
1618 add_flags
|= SYMFILE_VERBOSE
;
1620 gdb_argv
built_argv (args
);
1621 for (arg
= built_argv
[0], idx
= 0; arg
!= NULL
; arg
= built_argv
[++idx
])
1623 if (stop_processing_options
|| *arg
!= '-')
1628 error (_("Unrecognized argument \"%s\""), arg
);
1630 else if (strcmp (arg
, "-readnow") == 0)
1631 flags
|= OBJF_READNOW
;
1632 else if (strcmp (arg
, "-readnever") == 0)
1633 flags
|= OBJF_READNEVER
;
1634 else if (strcmp (arg
, "-o") == 0)
1636 arg
= built_argv
[++idx
];
1638 error (_("Missing argument to -o"));
1640 offset
= parse_and_eval_address (arg
);
1642 else if (strcmp (arg
, "--") == 0)
1643 stop_processing_options
= true;
1645 error (_("Unrecognized argument \"%s\""), arg
);
1649 error (_("no symbol file name was specified"));
1651 validate_readnow_readnever (flags
);
1653 /* Set SYMFILE_DEFER_BP_RESET because the proper displacement for a PIE
1654 (Position Independent Executable) main symbol file will only be
1655 computed by the solib_create_inferior_hook below. Without it,
1656 breakpoint_re_set would fail to insert the breakpoints with the zero
1658 add_flags
|= SYMFILE_DEFER_BP_RESET
;
1660 symbol_file_add_main_1 (name
, add_flags
, flags
, offset
);
1662 solib_create_inferior_hook (from_tty
);
1664 /* Now it's safe to re-add the breakpoints. */
1665 breakpoint_re_set ();
1669 /* Set the initial language. */
1672 set_initial_language (void)
1674 if (language_mode
== language_mode_manual
)
1676 enum language lang
= main_language ();
1677 /* Make C the default language. */
1678 enum language default_lang
= language_c
;
1680 if (lang
== language_unknown
)
1682 const char *name
= main_name ();
1684 = lookup_symbol_in_language (name
, NULL
, VAR_DOMAIN
, default_lang
,
1688 lang
= sym
->language ();
1691 if (lang
== language_unknown
)
1693 lang
= default_lang
;
1696 set_language (lang
);
1697 expected_language
= current_language
; /* Don't warn the user. */
1700 /* Open the file specified by NAME and hand it off to BFD for
1701 preliminary analysis. Return a newly initialized bfd *, which
1702 includes a newly malloc'd` copy of NAME (tilde-expanded and made
1703 absolute). In case of trouble, error() is called. */
1706 symfile_bfd_open (const char *name
)
1710 gdb::unique_xmalloc_ptr
<char> absolute_name
;
1711 if (!is_target_filename (name
))
1713 gdb::unique_xmalloc_ptr
<char> expanded_name (tilde_expand (name
));
1715 /* Look down path for it, allocate 2nd new malloc'd copy. */
1716 desc
= openp (getenv ("PATH"),
1717 OPF_TRY_CWD_FIRST
| OPF_RETURN_REALPATH
,
1718 expanded_name
.get (), O_RDONLY
| O_BINARY
, &absolute_name
);
1719 #if defined(__GO32__) || defined(_WIN32) || defined (__CYGWIN__)
1722 char *exename
= (char *) alloca (strlen (expanded_name
.get ()) + 5);
1724 strcat (strcpy (exename
, expanded_name
.get ()), ".exe");
1725 desc
= openp (getenv ("PATH"),
1726 OPF_TRY_CWD_FIRST
| OPF_RETURN_REALPATH
,
1727 exename
, O_RDONLY
| O_BINARY
, &absolute_name
);
1731 perror_with_name (expanded_name
.get ());
1733 name
= absolute_name
.get ();
1736 gdb_bfd_ref_ptr
sym_bfd (gdb_bfd_open (name
, gnutarget
, desc
));
1737 if (sym_bfd
== NULL
)
1738 error (_("`%s': can't open to read symbols: %s."), name
,
1739 bfd_errmsg (bfd_get_error ()));
1741 if (!gdb_bfd_has_target_filename (sym_bfd
.get ()))
1742 bfd_set_cacheable (sym_bfd
.get (), 1);
1744 if (!bfd_check_format (sym_bfd
.get (), bfd_object
))
1745 error (_("`%s': can't read symbols: %s."), name
,
1746 bfd_errmsg (bfd_get_error ()));
1751 /* Return the section index for SECTION_NAME on OBJFILE. Return -1 if
1752 the section was not found. */
1755 get_section_index (struct objfile
*objfile
, const char *section_name
)
1757 asection
*sect
= bfd_get_section_by_name (objfile
->obfd
, section_name
);
1765 /* Link SF into the global symtab_fns list.
1766 FLAVOUR is the file format that SF handles.
1767 Called on startup by the _initialize routine in each object file format
1768 reader, to register information about each format the reader is prepared
1772 add_symtab_fns (enum bfd_flavour flavour
, const struct sym_fns
*sf
)
1774 symtab_fns
.emplace_back (flavour
, sf
);
1777 /* Initialize OBJFILE to read symbols from its associated BFD. It
1778 either returns or calls error(). The result is an initialized
1779 struct sym_fns in the objfile structure, that contains cached
1780 information about the symbol file. */
1782 static const struct sym_fns
*
1783 find_sym_fns (bfd
*abfd
)
1785 enum bfd_flavour our_flavour
= bfd_get_flavour (abfd
);
1787 if (our_flavour
== bfd_target_srec_flavour
1788 || our_flavour
== bfd_target_ihex_flavour
1789 || our_flavour
== bfd_target_tekhex_flavour
)
1790 return NULL
; /* No symbols. */
1792 for (const registered_sym_fns
&rsf
: symtab_fns
)
1793 if (our_flavour
== rsf
.sym_flavour
)
1796 error (_("I'm sorry, Dave, I can't do that. Symbol format `%s' unknown."),
1797 bfd_get_target (abfd
));
1801 /* This function runs the load command of our current target. */
1804 load_command (const char *arg
, int from_tty
)
1808 /* The user might be reloading because the binary has changed. Take
1809 this opportunity to check. */
1810 reopen_exec_file ();
1816 const char *parg
, *prev
;
1818 arg
= get_exec_file (1);
1820 /* We may need to quote this string so buildargv can pull it
1823 while ((parg
= strpbrk (parg
, "\\\"'\t ")))
1825 temp
.append (prev
, parg
- prev
);
1827 temp
.push_back ('\\');
1829 /* If we have not copied anything yet, then we didn't see a
1830 character to quote, and we can just leave ARG unchanged. */
1834 arg
= temp
.c_str ();
1838 target_load (arg
, from_tty
);
1840 /* After re-loading the executable, we don't really know which
1841 overlays are mapped any more. */
1842 overlay_cache_invalid
= 1;
1845 /* This version of "load" should be usable for any target. Currently
1846 it is just used for remote targets, not inftarg.c or core files,
1847 on the theory that only in that case is it useful.
1849 Avoiding xmodem and the like seems like a win (a) because we don't have
1850 to worry about finding it, and (b) On VMS, fork() is very slow and so
1851 we don't want to run a subprocess. On the other hand, I'm not sure how
1852 performance compares. */
1854 static int validate_download
= 0;
1856 /* Callback service function for generic_load (bfd_map_over_sections). */
1859 add_section_size_callback (bfd
*abfd
, asection
*asec
, void *data
)
1861 bfd_size_type
*sum
= (bfd_size_type
*) data
;
1863 *sum
+= bfd_section_size (asec
);
1866 /* Opaque data for load_progress. */
1867 struct load_progress_data
1869 /* Cumulative data. */
1870 unsigned long write_count
= 0;
1871 unsigned long data_count
= 0;
1872 bfd_size_type total_size
= 0;
1875 /* Opaque data for load_progress for a single section. */
1876 struct load_progress_section_data
1878 load_progress_section_data (load_progress_data
*cumulative_
,
1879 const char *section_name_
, ULONGEST section_size_
,
1880 CORE_ADDR lma_
, gdb_byte
*buffer_
)
1881 : cumulative (cumulative_
), section_name (section_name_
),
1882 section_size (section_size_
), lma (lma_
), buffer (buffer_
)
1885 struct load_progress_data
*cumulative
;
1887 /* Per-section data. */
1888 const char *section_name
;
1889 ULONGEST section_sent
= 0;
1890 ULONGEST section_size
;
1895 /* Opaque data for load_section_callback. */
1896 struct load_section_data
1898 load_section_data (load_progress_data
*progress_data_
)
1899 : progress_data (progress_data_
)
1902 ~load_section_data ()
1904 for (auto &&request
: requests
)
1906 xfree (request
.data
);
1907 delete ((load_progress_section_data
*) request
.baton
);
1911 CORE_ADDR load_offset
= 0;
1912 struct load_progress_data
*progress_data
;
1913 std::vector
<struct memory_write_request
> requests
;
1916 /* Target write callback routine for progress reporting. */
1919 load_progress (ULONGEST bytes
, void *untyped_arg
)
1921 struct load_progress_section_data
*args
1922 = (struct load_progress_section_data
*) untyped_arg
;
1923 struct load_progress_data
*totals
;
1926 /* Writing padding data. No easy way to get at the cumulative
1927 stats, so just ignore this. */
1930 totals
= args
->cumulative
;
1932 if (bytes
== 0 && args
->section_sent
== 0)
1934 /* The write is just starting. Let the user know we've started
1936 current_uiout
->message ("Loading section %s, size %s lma %s\n",
1938 hex_string (args
->section_size
),
1939 paddress (target_gdbarch (), args
->lma
));
1943 if (validate_download
)
1945 /* Broken memories and broken monitors manifest themselves here
1946 when bring new computers to life. This doubles already slow
1948 /* NOTE: cagney/1999-10-18: A more efficient implementation
1949 might add a verify_memory() method to the target vector and
1950 then use that. remote.c could implement that method using
1951 the ``qCRC'' packet. */
1952 gdb::byte_vector
check (bytes
);
1954 if (target_read_memory (args
->lma
, check
.data (), bytes
) != 0)
1955 error (_("Download verify read failed at %s"),
1956 paddress (target_gdbarch (), args
->lma
));
1957 if (memcmp (args
->buffer
, check
.data (), bytes
) != 0)
1958 error (_("Download verify compare failed at %s"),
1959 paddress (target_gdbarch (), args
->lma
));
1961 totals
->data_count
+= bytes
;
1963 args
->buffer
+= bytes
;
1964 totals
->write_count
+= 1;
1965 args
->section_sent
+= bytes
;
1966 if (check_quit_flag ()
1967 || (deprecated_ui_load_progress_hook
!= NULL
1968 && deprecated_ui_load_progress_hook (args
->section_name
,
1969 args
->section_sent
)))
1970 error (_("Canceled the download"));
1972 if (deprecated_show_load_progress
!= NULL
)
1973 deprecated_show_load_progress (args
->section_name
,
1977 totals
->total_size
);
1980 /* Callback service function for generic_load (bfd_map_over_sections). */
1983 load_section_callback (bfd
*abfd
, asection
*asec
, void *data
)
1985 struct load_section_data
*args
= (struct load_section_data
*) data
;
1986 bfd_size_type size
= bfd_section_size (asec
);
1987 const char *sect_name
= bfd_section_name (asec
);
1989 if ((bfd_section_flags (asec
) & SEC_LOAD
) == 0)
1995 ULONGEST begin
= bfd_section_lma (asec
) + args
->load_offset
;
1996 ULONGEST end
= begin
+ size
;
1997 gdb_byte
*buffer
= (gdb_byte
*) xmalloc (size
);
1998 bfd_get_section_contents (abfd
, asec
, buffer
, 0, size
);
2000 load_progress_section_data
*section_data
2001 = new load_progress_section_data (args
->progress_data
, sect_name
, size
,
2004 args
->requests
.emplace_back (begin
, end
, buffer
, section_data
);
2007 static void print_transfer_performance (struct ui_file
*stream
,
2008 unsigned long data_count
,
2009 unsigned long write_count
,
2010 std::chrono::steady_clock::duration d
);
2012 /* See symfile.h. */
2015 generic_load (const char *args
, int from_tty
)
2017 struct load_progress_data total_progress
;
2018 struct load_section_data
cbdata (&total_progress
);
2019 struct ui_out
*uiout
= current_uiout
;
2022 error_no_arg (_("file to load"));
2024 gdb_argv
argv (args
);
2026 gdb::unique_xmalloc_ptr
<char> filename (tilde_expand (argv
[0]));
2028 if (argv
[1] != NULL
)
2032 cbdata
.load_offset
= strtoulst (argv
[1], &endptr
, 0);
2034 /* If the last word was not a valid number then
2035 treat it as a file name with spaces in. */
2036 if (argv
[1] == endptr
)
2037 error (_("Invalid download offset:%s."), argv
[1]);
2039 if (argv
[2] != NULL
)
2040 error (_("Too many parameters."));
2043 /* Open the file for loading. */
2044 gdb_bfd_ref_ptr
loadfile_bfd (gdb_bfd_open (filename
.get (), gnutarget
, -1));
2045 if (loadfile_bfd
== NULL
)
2046 perror_with_name (filename
.get ());
2048 if (!bfd_check_format (loadfile_bfd
.get (), bfd_object
))
2050 error (_("\"%s\" is not an object file: %s"), filename
.get (),
2051 bfd_errmsg (bfd_get_error ()));
2054 bfd_map_over_sections (loadfile_bfd
.get (), add_section_size_callback
,
2055 (void *) &total_progress
.total_size
);
2057 bfd_map_over_sections (loadfile_bfd
.get (), load_section_callback
, &cbdata
);
2059 using namespace std::chrono
;
2061 steady_clock::time_point start_time
= steady_clock::now ();
2063 if (target_write_memory_blocks (cbdata
.requests
, flash_discard
,
2064 load_progress
) != 0)
2065 error (_("Load failed"));
2067 steady_clock::time_point end_time
= steady_clock::now ();
2069 CORE_ADDR entry
= bfd_get_start_address (loadfile_bfd
.get ());
2070 entry
= gdbarch_addr_bits_remove (target_gdbarch (), entry
);
2071 uiout
->text ("Start address ");
2072 uiout
->field_core_addr ("address", target_gdbarch (), entry
);
2073 uiout
->text (", load size ");
2074 uiout
->field_unsigned ("load-size", total_progress
.data_count
);
2076 regcache_write_pc (get_current_regcache (), entry
);
2078 /* Reset breakpoints, now that we have changed the load image. For
2079 instance, breakpoints may have been set (or reset, by
2080 post_create_inferior) while connected to the target but before we
2081 loaded the program. In that case, the prologue analyzer could
2082 have read instructions from the target to find the right
2083 breakpoint locations. Loading has changed the contents of that
2086 breakpoint_re_set ();
2088 print_transfer_performance (gdb_stdout
, total_progress
.data_count
,
2089 total_progress
.write_count
,
2090 end_time
- start_time
);
2093 /* Report on STREAM the performance of a memory transfer operation,
2094 such as 'load'. DATA_COUNT is the number of bytes transferred.
2095 WRITE_COUNT is the number of separate write operations, or 0, if
2096 that information is not available. TIME is how long the operation
2100 print_transfer_performance (struct ui_file
*stream
,
2101 unsigned long data_count
,
2102 unsigned long write_count
,
2103 std::chrono::steady_clock::duration time
)
2105 using namespace std::chrono
;
2106 struct ui_out
*uiout
= current_uiout
;
2108 milliseconds ms
= duration_cast
<milliseconds
> (time
);
2110 uiout
->text ("Transfer rate: ");
2111 if (ms
.count () > 0)
2113 unsigned long rate
= ((ULONGEST
) data_count
* 1000) / ms
.count ();
2115 if (uiout
->is_mi_like_p ())
2117 uiout
->field_unsigned ("transfer-rate", rate
* 8);
2118 uiout
->text (" bits/sec");
2120 else if (rate
< 1024)
2122 uiout
->field_unsigned ("transfer-rate", rate
);
2123 uiout
->text (" bytes/sec");
2127 uiout
->field_unsigned ("transfer-rate", rate
/ 1024);
2128 uiout
->text (" KB/sec");
2133 uiout
->field_unsigned ("transferred-bits", (data_count
* 8));
2134 uiout
->text (" bits in <1 sec");
2136 if (write_count
> 0)
2139 uiout
->field_unsigned ("write-rate", data_count
/ write_count
);
2140 uiout
->text (" bytes/write");
2142 uiout
->text (".\n");
2145 /* Add an OFFSET to the start address of each section in OBJF, except
2146 sections that were specified in ADDRS. */
2149 set_objfile_default_section_offset (struct objfile
*objf
,
2150 const section_addr_info
&addrs
,
2153 /* Add OFFSET to all sections by default. */
2154 section_offsets
offsets (objf
->section_offsets
.size (), offset
);
2156 /* Create sorted lists of all sections in ADDRS as well as all
2157 sections in OBJF. */
2159 std::vector
<const struct other_sections
*> addrs_sorted
2160 = addrs_section_sort (addrs
);
2162 section_addr_info objf_addrs
2163 = build_section_addr_info_from_objfile (objf
);
2164 std::vector
<const struct other_sections
*> objf_addrs_sorted
2165 = addrs_section_sort (objf_addrs
);
2167 /* Walk the BFD section list, and if a matching section is found in
2168 ADDRS_SORTED_LIST, set its offset to zero to keep its address
2171 Note that both lists may contain multiple sections with the same
2172 name, and then the sections from ADDRS are matched in BFD order
2173 (thanks to sectindex). */
2175 std::vector
<const struct other_sections
*>::iterator addrs_sorted_iter
2176 = addrs_sorted
.begin ();
2177 for (const other_sections
*objf_sect
: objf_addrs_sorted
)
2179 const char *objf_name
= addr_section_name (objf_sect
->name
.c_str ());
2182 while (cmp
< 0 && addrs_sorted_iter
!= addrs_sorted
.end ())
2184 const struct other_sections
*sect
= *addrs_sorted_iter
;
2185 const char *sect_name
= addr_section_name (sect
->name
.c_str ());
2186 cmp
= strcmp (sect_name
, objf_name
);
2188 ++addrs_sorted_iter
;
2192 offsets
[objf_sect
->sectindex
] = 0;
2195 /* Apply the new section offsets. */
2196 objfile_relocate (objf
, offsets
);
2199 /* This function allows the addition of incrementally linked object files.
2200 It does not modify any state in the target, only in the debugger. */
2203 add_symbol_file_command (const char *args
, int from_tty
)
2205 struct gdbarch
*gdbarch
= get_current_arch ();
2206 gdb::unique_xmalloc_ptr
<char> filename
;
2209 struct objfile
*objf
;
2210 objfile_flags flags
= OBJF_USERLOADED
| OBJF_SHARED
;
2211 symfile_add_flags add_flags
= 0;
2214 add_flags
|= SYMFILE_VERBOSE
;
2222 std::vector
<sect_opt
> sect_opts
= { { ".text", NULL
} };
2223 bool stop_processing_options
= false;
2224 CORE_ADDR offset
= 0;
2229 error (_("add-symbol-file takes a file name and an address"));
2231 bool seen_addr
= false;
2232 bool seen_offset
= false;
2233 gdb_argv
argv (args
);
2235 for (arg
= argv
[0], argcnt
= 0; arg
!= NULL
; arg
= argv
[++argcnt
])
2237 if (stop_processing_options
|| *arg
!= '-')
2239 if (filename
== NULL
)
2241 /* First non-option argument is always the filename. */
2242 filename
.reset (tilde_expand (arg
));
2244 else if (!seen_addr
)
2246 /* The second non-option argument is always the text
2247 address at which to load the program. */
2248 sect_opts
[0].value
= arg
;
2252 error (_("Unrecognized argument \"%s\""), arg
);
2254 else if (strcmp (arg
, "-readnow") == 0)
2255 flags
|= OBJF_READNOW
;
2256 else if (strcmp (arg
, "-readnever") == 0)
2257 flags
|= OBJF_READNEVER
;
2258 else if (strcmp (arg
, "-s") == 0)
2260 if (argv
[argcnt
+ 1] == NULL
)
2261 error (_("Missing section name after \"-s\""));
2262 else if (argv
[argcnt
+ 2] == NULL
)
2263 error (_("Missing section address after \"-s\""));
2265 sect_opt sect
= { argv
[argcnt
+ 1], argv
[argcnt
+ 2] };
2267 sect_opts
.push_back (sect
);
2270 else if (strcmp (arg
, "-o") == 0)
2272 arg
= argv
[++argcnt
];
2274 error (_("Missing argument to -o"));
2276 offset
= parse_and_eval_address (arg
);
2279 else if (strcmp (arg
, "--") == 0)
2280 stop_processing_options
= true;
2282 error (_("Unrecognized argument \"%s\""), arg
);
2285 if (filename
== NULL
)
2286 error (_("You must provide a filename to be loaded."));
2288 validate_readnow_readnever (flags
);
2290 /* Print the prompt for the query below. And save the arguments into
2291 a sect_addr_info structure to be passed around to other
2292 functions. We have to split this up into separate print
2293 statements because hex_string returns a local static
2296 printf_unfiltered (_("add symbol table from file \"%s\""),
2298 section_addr_info section_addrs
;
2299 std::vector
<sect_opt
>::const_iterator it
= sect_opts
.begin ();
2302 for (; it
!= sect_opts
.end (); ++it
)
2305 const char *val
= it
->value
;
2306 const char *sec
= it
->name
;
2308 if (section_addrs
.empty ())
2309 printf_unfiltered (_(" at\n"));
2310 addr
= parse_and_eval_address (val
);
2312 /* Here we store the section offsets in the order they were
2313 entered on the command line. Every array element is
2314 assigned an ascending section index to preserve the above
2315 order over an unstable sorting algorithm. This dummy
2316 index is not used for any other purpose.
2318 section_addrs
.emplace_back (addr
, sec
, section_addrs
.size ());
2319 printf_filtered ("\t%s_addr = %s\n", sec
,
2320 paddress (gdbarch
, addr
));
2322 /* The object's sections are initialized when a
2323 call is made to build_objfile_section_table (objfile).
2324 This happens in reread_symbols.
2325 At this point, we don't know what file type this is,
2326 so we can't determine what section names are valid. */
2329 printf_unfiltered (_("%s offset by %s\n"),
2330 (section_addrs
.empty ()
2331 ? _(" with all sections")
2332 : _("with other sections")),
2333 paddress (gdbarch
, offset
));
2334 else if (section_addrs
.empty ())
2335 printf_unfiltered ("\n");
2337 if (from_tty
&& (!query ("%s", "")))
2338 error (_("Not confirmed."));
2340 objf
= symbol_file_add (filename
.get (), add_flags
, §ion_addrs
,
2342 if (!objfile_has_symbols (objf
) && objf
->per_bfd
->minimal_symbol_count
<= 0)
2343 warning (_("newly-added symbol file \"%s\" does not provide any symbols"),
2347 set_objfile_default_section_offset (objf
, section_addrs
, offset
);
2349 add_target_sections_of_objfile (objf
);
2351 /* Getting new symbols may change our opinion about what is
2353 reinit_frame_cache ();
2357 /* This function removes a symbol file that was added via add-symbol-file. */
2360 remove_symbol_file_command (const char *args
, int from_tty
)
2362 struct objfile
*objf
= NULL
;
2363 struct program_space
*pspace
= current_program_space
;
2368 error (_("remove-symbol-file: no symbol file provided"));
2370 gdb_argv
argv (args
);
2372 if (strcmp (argv
[0], "-a") == 0)
2374 /* Interpret the next argument as an address. */
2377 if (argv
[1] == NULL
)
2378 error (_("Missing address argument"));
2380 if (argv
[2] != NULL
)
2381 error (_("Junk after %s"), argv
[1]);
2383 addr
= parse_and_eval_address (argv
[1]);
2385 for (objfile
*objfile
: current_program_space
->objfiles ())
2387 if ((objfile
->flags
& OBJF_USERLOADED
) != 0
2388 && (objfile
->flags
& OBJF_SHARED
) != 0
2389 && objfile
->pspace
== pspace
2390 && is_addr_in_objfile (addr
, objfile
))
2397 else if (argv
[0] != NULL
)
2399 /* Interpret the current argument as a file name. */
2401 if (argv
[1] != NULL
)
2402 error (_("Junk after %s"), argv
[0]);
2404 gdb::unique_xmalloc_ptr
<char> filename (tilde_expand (argv
[0]));
2406 for (objfile
*objfile
: current_program_space
->objfiles ())
2408 if ((objfile
->flags
& OBJF_USERLOADED
) != 0
2409 && (objfile
->flags
& OBJF_SHARED
) != 0
2410 && objfile
->pspace
== pspace
2411 && filename_cmp (filename
.get (), objfile_name (objfile
)) == 0)
2420 error (_("No symbol file found"));
2423 && !query (_("Remove symbol table from file \"%s\"? "),
2424 objfile_name (objf
)))
2425 error (_("Not confirmed."));
2428 clear_symtab_users (0);
2431 /* Re-read symbols if a symbol-file has changed. */
2434 reread_symbols (void)
2437 struct stat new_statbuf
;
2439 std::vector
<struct objfile
*> new_objfiles
;
2441 for (objfile
*objfile
: current_program_space
->objfiles ())
2443 if (objfile
->obfd
== NULL
)
2446 /* Separate debug objfiles are handled in the main objfile. */
2447 if (objfile
->separate_debug_objfile_backlink
)
2450 /* If this object is from an archive (what you usually create with
2451 `ar', often called a `static library' on most systems, though
2452 a `shared library' on AIX is also an archive), then you should
2453 stat on the archive name, not member name. */
2454 if (objfile
->obfd
->my_archive
)
2455 res
= stat (objfile
->obfd
->my_archive
->filename
, &new_statbuf
);
2457 res
= stat (objfile_name (objfile
), &new_statbuf
);
2460 /* FIXME, should use print_sys_errmsg but it's not filtered. */
2461 printf_filtered (_("`%s' has disappeared; keeping its symbols.\n"),
2462 objfile_name (objfile
));
2465 new_modtime
= new_statbuf
.st_mtime
;
2466 if (new_modtime
!= objfile
->mtime
)
2468 printf_filtered (_("`%s' has changed; re-reading symbols.\n"),
2469 objfile_name (objfile
));
2471 /* There are various functions like symbol_file_add,
2472 symfile_bfd_open, syms_from_objfile, etc., which might
2473 appear to do what we want. But they have various other
2474 effects which we *don't* want. So we just do stuff
2475 ourselves. We don't worry about mapped files (for one thing,
2476 any mapped file will be out of date). */
2478 /* If we get an error, blow away this objfile (not sure if
2479 that is the correct response for things like shared
2481 objfile_up
objfile_holder (objfile
);
2483 /* We need to do this whenever any symbols go away. */
2484 clear_symtab_users_cleanup
defer_clear_users (0);
2486 if (exec_bfd
!= NULL
2487 && filename_cmp (bfd_get_filename (objfile
->obfd
),
2488 bfd_get_filename (exec_bfd
)) == 0)
2490 /* Reload EXEC_BFD without asking anything. */
2492 exec_file_attach (bfd_get_filename (objfile
->obfd
), 0);
2495 /* Keep the calls order approx. the same as in free_objfile. */
2497 /* Free the separate debug objfiles. It will be
2498 automatically recreated by sym_read. */
2499 free_objfile_separate_debug (objfile
);
2501 /* Clear the stale source cache. */
2502 forget_cached_source_info ();
2504 /* Remove any references to this objfile in the global
2506 preserve_values (objfile
);
2508 /* Nuke all the state that we will re-read. Much of the following
2509 code which sets things to NULL really is necessary to tell
2510 other parts of GDB that there is nothing currently there.
2512 Try to keep the freeing order compatible with free_objfile. */
2514 if (objfile
->sf
!= NULL
)
2516 (*objfile
->sf
->sym_finish
) (objfile
);
2519 clear_objfile_data (objfile
);
2521 /* Clean up any state BFD has sitting around. */
2523 gdb_bfd_ref_ptr
obfd (objfile
->obfd
);
2524 const char *obfd_filename
;
2526 obfd_filename
= bfd_get_filename (objfile
->obfd
);
2527 /* Open the new BFD before freeing the old one, so that
2528 the filename remains live. */
2529 gdb_bfd_ref_ptr
temp (gdb_bfd_open (obfd_filename
, gnutarget
, -1));
2530 objfile
->obfd
= temp
.release ();
2531 if (objfile
->obfd
== NULL
)
2532 error (_("Can't open %s to read symbols."), obfd_filename
);
2535 std::string original_name
= objfile
->original_name
;
2537 /* bfd_openr sets cacheable to true, which is what we want. */
2538 if (!bfd_check_format (objfile
->obfd
, bfd_object
))
2539 error (_("Can't read symbols from %s: %s."), objfile_name (objfile
),
2540 bfd_errmsg (bfd_get_error ()));
2542 objfile
->reset_psymtabs ();
2544 /* NB: after this call to obstack_free, objfiles_changed
2545 will need to be called (see discussion below). */
2546 obstack_free (&objfile
->objfile_obstack
, 0);
2547 objfile
->sections
= NULL
;
2548 objfile
->compunit_symtabs
= NULL
;
2549 objfile
->template_symbols
= NULL
;
2550 objfile
->static_links
.reset (nullptr);
2552 /* obstack_init also initializes the obstack so it is
2553 empty. We could use obstack_specify_allocation but
2554 gdb_obstack.h specifies the alloc/dealloc functions. */
2555 obstack_init (&objfile
->objfile_obstack
);
2557 /* set_objfile_per_bfd potentially allocates the per-bfd
2558 data on the objfile's obstack (if sharing data across
2559 multiple users is not possible), so it's important to
2560 do it *after* the obstack has been initialized. */
2561 set_objfile_per_bfd (objfile
);
2563 objfile
->original_name
2564 = obstack_strdup (&objfile
->objfile_obstack
, original_name
);
2566 /* Reset the sym_fns pointer. The ELF reader can change it
2567 based on whether .gdb_index is present, and we need it to
2568 start over. PR symtab/15885 */
2569 objfile_set_sym_fns (objfile
, find_sym_fns (objfile
->obfd
));
2571 build_objfile_section_table (objfile
);
2573 /* What the hell is sym_new_init for, anyway? The concept of
2574 distinguishing between the main file and additional files
2575 in this way seems rather dubious. */
2576 if (objfile
== symfile_objfile
)
2578 (*objfile
->sf
->sym_new_init
) (objfile
);
2581 (*objfile
->sf
->sym_init
) (objfile
);
2582 clear_complaints ();
2584 objfile
->flags
&= ~OBJF_PSYMTABS_READ
;
2586 /* We are about to read new symbols and potentially also
2587 DWARF information. Some targets may want to pass addresses
2588 read from DWARF DIE's through an adjustment function before
2589 saving them, like MIPS, which may call into
2590 "find_pc_section". When called, that function will make
2591 use of per-objfile program space data.
2593 Since we discarded our section information above, we have
2594 dangling pointers in the per-objfile program space data
2595 structure. Force GDB to update the section mapping
2596 information by letting it know the objfile has changed,
2597 making the dangling pointers point to correct data
2600 objfiles_changed ();
2602 read_symbols (objfile
, 0);
2604 if (!objfile_has_symbols (objfile
))
2607 printf_filtered (_("(no debugging symbols found)\n"));
2611 /* We're done reading the symbol file; finish off complaints. */
2612 clear_complaints ();
2614 /* Getting new symbols may change our opinion about what is
2617 reinit_frame_cache ();
2619 /* Discard cleanups as symbol reading was successful. */
2620 objfile_holder
.release ();
2621 defer_clear_users
.release ();
2623 /* If the mtime has changed between the time we set new_modtime
2624 and now, we *want* this to be out of date, so don't call stat
2626 objfile
->mtime
= new_modtime
;
2627 init_entry_point_info (objfile
);
2629 new_objfiles
.push_back (objfile
);
2633 if (!new_objfiles
.empty ())
2635 clear_symtab_users (0);
2637 /* clear_objfile_data for each objfile was called before freeing it and
2638 gdb::observers::new_objfile.notify (NULL) has been called by
2639 clear_symtab_users above. Notify the new files now. */
2640 for (auto iter
: new_objfiles
)
2641 gdb::observers::new_objfile
.notify (iter
);
2643 /* At least one objfile has changed, so we can consider that
2644 the executable we're debugging has changed too. */
2645 gdb::observers::executable_changed
.notify ();
2650 struct filename_language
2652 filename_language (const std::string
&ext_
, enum language lang_
)
2653 : ext (ext_
), lang (lang_
)
2660 static std::vector
<filename_language
> filename_language_table
;
2662 /* See symfile.h. */
2665 add_filename_language (const char *ext
, enum language lang
)
2667 filename_language_table
.emplace_back (ext
, lang
);
2670 static char *ext_args
;
2672 show_ext_args (struct ui_file
*file
, int from_tty
,
2673 struct cmd_list_element
*c
, const char *value
)
2675 fprintf_filtered (file
,
2676 _("Mapping between filename extension "
2677 "and source language is \"%s\".\n"),
2682 set_ext_lang_command (const char *args
,
2683 int from_tty
, struct cmd_list_element
*e
)
2685 char *cp
= ext_args
;
2688 /* First arg is filename extension, starting with '.' */
2690 error (_("'%s': Filename extension must begin with '.'"), ext_args
);
2692 /* Find end of first arg. */
2693 while (*cp
&& !isspace (*cp
))
2697 error (_("'%s': two arguments required -- "
2698 "filename extension and language"),
2701 /* Null-terminate first arg. */
2704 /* Find beginning of second arg, which should be a source language. */
2705 cp
= skip_spaces (cp
);
2708 error (_("'%s': two arguments required -- "
2709 "filename extension and language"),
2712 /* Lookup the language from among those we know. */
2713 lang
= language_enum (cp
);
2715 auto it
= filename_language_table
.begin ();
2716 /* Now lookup the filename extension: do we already know it? */
2717 for (; it
!= filename_language_table
.end (); it
++)
2719 if (it
->ext
== ext_args
)
2723 if (it
== filename_language_table
.end ())
2725 /* New file extension. */
2726 add_filename_language (ext_args
, lang
);
2730 /* Redefining a previously known filename extension. */
2733 /* query ("Really make files of type %s '%s'?", */
2734 /* ext_args, language_str (lang)); */
2741 info_ext_lang_command (const char *args
, int from_tty
)
2743 printf_filtered (_("Filename extensions and the languages they represent:"));
2744 printf_filtered ("\n\n");
2745 for (const filename_language
&entry
: filename_language_table
)
2746 printf_filtered ("\t%s\t- %s\n", entry
.ext
.c_str (),
2747 language_str (entry
.lang
));
2751 deduce_language_from_filename (const char *filename
)
2755 if (filename
!= NULL
)
2756 if ((cp
= strrchr (filename
, '.')) != NULL
)
2758 for (const filename_language
&entry
: filename_language_table
)
2759 if (entry
.ext
== cp
)
2763 return language_unknown
;
2766 /* Allocate and initialize a new symbol table.
2767 CUST is from the result of allocate_compunit_symtab. */
2770 allocate_symtab (struct compunit_symtab
*cust
, const char *filename
)
2772 struct objfile
*objfile
= cust
->objfile
;
2773 struct symtab
*symtab
2774 = OBSTACK_ZALLOC (&objfile
->objfile_obstack
, struct symtab
);
2776 symtab
->filename
= objfile
->intern (filename
);
2777 symtab
->fullname
= NULL
;
2778 symtab
->language
= deduce_language_from_filename (filename
);
2780 /* This can be very verbose with lots of headers.
2781 Only print at higher debug levels. */
2782 if (symtab_create_debug
>= 2)
2784 /* Be a bit clever with debugging messages, and don't print objfile
2785 every time, only when it changes. */
2786 static char *last_objfile_name
= NULL
;
2788 if (last_objfile_name
== NULL
2789 || strcmp (last_objfile_name
, objfile_name (objfile
)) != 0)
2791 xfree (last_objfile_name
);
2792 last_objfile_name
= xstrdup (objfile_name (objfile
));
2793 fprintf_filtered (gdb_stdlog
,
2794 "Creating one or more symtabs for objfile %s ...\n",
2797 fprintf_filtered (gdb_stdlog
,
2798 "Created symtab %s for module %s.\n",
2799 host_address_to_string (symtab
), filename
);
2802 /* Add it to CUST's list of symtabs. */
2803 if (cust
->filetabs
== NULL
)
2805 cust
->filetabs
= symtab
;
2806 cust
->last_filetab
= symtab
;
2810 cust
->last_filetab
->next
= symtab
;
2811 cust
->last_filetab
= symtab
;
2814 /* Backlink to the containing compunit symtab. */
2815 symtab
->compunit_symtab
= cust
;
2820 /* Allocate and initialize a new compunit.
2821 NAME is the name of the main source file, if there is one, or some
2822 descriptive text if there are no source files. */
2824 struct compunit_symtab
*
2825 allocate_compunit_symtab (struct objfile
*objfile
, const char *name
)
2827 struct compunit_symtab
*cu
= OBSTACK_ZALLOC (&objfile
->objfile_obstack
,
2828 struct compunit_symtab
);
2829 const char *saved_name
;
2831 cu
->objfile
= objfile
;
2833 /* The name we record here is only for display/debugging purposes.
2834 Just save the basename to avoid path issues (too long for display,
2835 relative vs absolute, etc.). */
2836 saved_name
= lbasename (name
);
2837 cu
->name
= obstack_strdup (&objfile
->objfile_obstack
, saved_name
);
2839 COMPUNIT_DEBUGFORMAT (cu
) = "unknown";
2841 if (symtab_create_debug
)
2843 fprintf_filtered (gdb_stdlog
,
2844 "Created compunit symtab %s for %s.\n",
2845 host_address_to_string (cu
),
2852 /* Hook CU to the objfile it comes from. */
2855 add_compunit_symtab_to_objfile (struct compunit_symtab
*cu
)
2857 cu
->next
= cu
->objfile
->compunit_symtabs
;
2858 cu
->objfile
->compunit_symtabs
= cu
;
2862 /* Reset all data structures in gdb which may contain references to
2863 symbol table data. */
2866 clear_symtab_users (symfile_add_flags add_flags
)
2868 /* Someday, we should do better than this, by only blowing away
2869 the things that really need to be blown. */
2871 /* Clear the "current" symtab first, because it is no longer valid.
2872 breakpoint_re_set may try to access the current symtab. */
2873 clear_current_source_symtab_and_line ();
2876 clear_last_displayed_sal ();
2877 clear_pc_function_cache ();
2878 gdb::observers::new_objfile
.notify (NULL
);
2880 /* Varobj may refer to old symbols, perform a cleanup. */
2881 varobj_invalidate ();
2883 /* Now that the various caches have been cleared, we can re_set
2884 our breakpoints without risking it using stale data. */
2885 if ((add_flags
& SYMFILE_DEFER_BP_RESET
) == 0)
2886 breakpoint_re_set ();
2890 The following code implements an abstraction for debugging overlay sections.
2892 The target model is as follows:
2893 1) The gnu linker will permit multiple sections to be mapped into the
2894 same VMA, each with its own unique LMA (or load address).
2895 2) It is assumed that some runtime mechanism exists for mapping the
2896 sections, one by one, from the load address into the VMA address.
2897 3) This code provides a mechanism for gdb to keep track of which
2898 sections should be considered to be mapped from the VMA to the LMA.
2899 This information is used for symbol lookup, and memory read/write.
2900 For instance, if a section has been mapped then its contents
2901 should be read from the VMA, otherwise from the LMA.
2903 Two levels of debugger support for overlays are available. One is
2904 "manual", in which the debugger relies on the user to tell it which
2905 overlays are currently mapped. This level of support is
2906 implemented entirely in the core debugger, and the information about
2907 whether a section is mapped is kept in the objfile->obj_section table.
2909 The second level of support is "automatic", and is only available if
2910 the target-specific code provides functionality to read the target's
2911 overlay mapping table, and translate its contents for the debugger
2912 (by updating the mapped state information in the obj_section tables).
2914 The interface is as follows:
2916 overlay map <name> -- tell gdb to consider this section mapped
2917 overlay unmap <name> -- tell gdb to consider this section unmapped
2918 overlay list -- list the sections that GDB thinks are mapped
2919 overlay read-target -- get the target's state of what's mapped
2920 overlay off/manual/auto -- set overlay debugging state
2921 Functional interface:
2922 find_pc_mapped_section(pc): if the pc is in the range of a mapped
2923 section, return that section.
2924 find_pc_overlay(pc): find any overlay section that contains
2925 the pc, either in its VMA or its LMA
2926 section_is_mapped(sect): true if overlay is marked as mapped
2927 section_is_overlay(sect): true if section's VMA != LMA
2928 pc_in_mapped_range(pc,sec): true if pc belongs to section's VMA
2929 pc_in_unmapped_range(...): true if pc belongs to section's LMA
2930 sections_overlap(sec1, sec2): true if mapped sec1 and sec2 ranges overlap
2931 overlay_mapped_address(...): map an address from section's LMA to VMA
2932 overlay_unmapped_address(...): map an address from section's VMA to LMA
2933 symbol_overlayed_address(...): Return a "current" address for symbol:
2934 either in VMA or LMA depending on whether
2935 the symbol's section is currently mapped. */
2937 /* Overlay debugging state: */
2939 enum overlay_debugging_state overlay_debugging
= ovly_off
;
2940 int overlay_cache_invalid
= 0; /* True if need to refresh mapped state. */
2942 /* Function: section_is_overlay (SECTION)
2943 Returns true if SECTION has VMA not equal to LMA, ie.
2944 SECTION is loaded at an address different from where it will "run". */
2947 section_is_overlay (struct obj_section
*section
)
2949 if (overlay_debugging
&& section
)
2951 asection
*bfd_section
= section
->the_bfd_section
;
2953 if (bfd_section_lma (bfd_section
) != 0
2954 && bfd_section_lma (bfd_section
) != bfd_section_vma (bfd_section
))
2961 /* Function: overlay_invalidate_all (void)
2962 Invalidate the mapped state of all overlay sections (mark it as stale). */
2965 overlay_invalidate_all (void)
2967 struct obj_section
*sect
;
2969 for (objfile
*objfile
: current_program_space
->objfiles ())
2970 ALL_OBJFILE_OSECTIONS (objfile
, sect
)
2971 if (section_is_overlay (sect
))
2972 sect
->ovly_mapped
= -1;
2975 /* Function: section_is_mapped (SECTION)
2976 Returns true if section is an overlay, and is currently mapped.
2978 Access to the ovly_mapped flag is restricted to this function, so
2979 that we can do automatic update. If the global flag
2980 OVERLAY_CACHE_INVALID is set (by wait_for_inferior), then call
2981 overlay_invalidate_all. If the mapped state of the particular
2982 section is stale, then call TARGET_OVERLAY_UPDATE to refresh it. */
2985 section_is_mapped (struct obj_section
*osect
)
2987 struct gdbarch
*gdbarch
;
2989 if (osect
== 0 || !section_is_overlay (osect
))
2992 switch (overlay_debugging
)
2996 return 0; /* overlay debugging off */
2997 case ovly_auto
: /* overlay debugging automatic */
2998 /* Unles there is a gdbarch_overlay_update function,
2999 there's really nothing useful to do here (can't really go auto). */
3000 gdbarch
= osect
->objfile
->arch ();
3001 if (gdbarch_overlay_update_p (gdbarch
))
3003 if (overlay_cache_invalid
)
3005 overlay_invalidate_all ();
3006 overlay_cache_invalid
= 0;
3008 if (osect
->ovly_mapped
== -1)
3009 gdbarch_overlay_update (gdbarch
, osect
);
3012 case ovly_on
: /* overlay debugging manual */
3013 return osect
->ovly_mapped
== 1;
3017 /* Function: pc_in_unmapped_range
3018 If PC falls into the lma range of SECTION, return true, else false. */
3021 pc_in_unmapped_range (CORE_ADDR pc
, struct obj_section
*section
)
3023 if (section_is_overlay (section
))
3025 asection
*bfd_section
= section
->the_bfd_section
;
3027 /* We assume the LMA is relocated by the same offset as the VMA. */
3028 bfd_vma size
= bfd_section_size (bfd_section
);
3029 CORE_ADDR offset
= obj_section_offset (section
);
3031 if (bfd_section_lma (bfd_section
) + offset
<= pc
3032 && pc
< bfd_section_lma (bfd_section
) + offset
+ size
)
3039 /* Function: pc_in_mapped_range
3040 If PC falls into the vma range of SECTION, return true, else false. */
3043 pc_in_mapped_range (CORE_ADDR pc
, struct obj_section
*section
)
3045 if (section_is_overlay (section
))
3047 if (obj_section_addr (section
) <= pc
3048 && pc
< obj_section_endaddr (section
))
3055 /* Return true if the mapped ranges of sections A and B overlap, false
3059 sections_overlap (struct obj_section
*a
, struct obj_section
*b
)
3061 CORE_ADDR a_start
= obj_section_addr (a
);
3062 CORE_ADDR a_end
= obj_section_endaddr (a
);
3063 CORE_ADDR b_start
= obj_section_addr (b
);
3064 CORE_ADDR b_end
= obj_section_endaddr (b
);
3066 return (a_start
< b_end
&& b_start
< a_end
);
3069 /* Function: overlay_unmapped_address (PC, SECTION)
3070 Returns the address corresponding to PC in the unmapped (load) range.
3071 May be the same as PC. */
3074 overlay_unmapped_address (CORE_ADDR pc
, struct obj_section
*section
)
3076 if (section_is_overlay (section
) && pc_in_mapped_range (pc
, section
))
3078 asection
*bfd_section
= section
->the_bfd_section
;
3080 return (pc
+ bfd_section_lma (bfd_section
)
3081 - bfd_section_vma (bfd_section
));
3087 /* Function: overlay_mapped_address (PC, SECTION)
3088 Returns the address corresponding to PC in the mapped (runtime) range.
3089 May be the same as PC. */
3092 overlay_mapped_address (CORE_ADDR pc
, struct obj_section
*section
)
3094 if (section_is_overlay (section
) && pc_in_unmapped_range (pc
, section
))
3096 asection
*bfd_section
= section
->the_bfd_section
;
3098 return (pc
+ bfd_section_vma (bfd_section
)
3099 - bfd_section_lma (bfd_section
));
3105 /* Function: symbol_overlayed_address
3106 Return one of two addresses (relative to the VMA or to the LMA),
3107 depending on whether the section is mapped or not. */
3110 symbol_overlayed_address (CORE_ADDR address
, struct obj_section
*section
)
3112 if (overlay_debugging
)
3114 /* If the symbol has no section, just return its regular address. */
3117 /* If the symbol's section is not an overlay, just return its
3119 if (!section_is_overlay (section
))
3121 /* If the symbol's section is mapped, just return its address. */
3122 if (section_is_mapped (section
))
3125 * HOWEVER: if the symbol is in an overlay section which is NOT mapped,
3126 * then return its LOADED address rather than its vma address!!
3128 return overlay_unmapped_address (address
, section
);
3133 /* Function: find_pc_overlay (PC)
3134 Return the best-match overlay section for PC:
3135 If PC matches a mapped overlay section's VMA, return that section.
3136 Else if PC matches an unmapped section's VMA, return that section.
3137 Else if PC matches an unmapped section's LMA, return that section. */
3139 struct obj_section
*
3140 find_pc_overlay (CORE_ADDR pc
)
3142 struct obj_section
*osect
, *best_match
= NULL
;
3144 if (overlay_debugging
)
3146 for (objfile
*objfile
: current_program_space
->objfiles ())
3147 ALL_OBJFILE_OSECTIONS (objfile
, osect
)
3148 if (section_is_overlay (osect
))
3150 if (pc_in_mapped_range (pc
, osect
))
3152 if (section_is_mapped (osect
))
3157 else if (pc_in_unmapped_range (pc
, osect
))
3164 /* Function: find_pc_mapped_section (PC)
3165 If PC falls into the VMA address range of an overlay section that is
3166 currently marked as MAPPED, return that section. Else return NULL. */
3168 struct obj_section
*
3169 find_pc_mapped_section (CORE_ADDR pc
)
3171 struct obj_section
*osect
;
3173 if (overlay_debugging
)
3175 for (objfile
*objfile
: current_program_space
->objfiles ())
3176 ALL_OBJFILE_OSECTIONS (objfile
, osect
)
3177 if (pc_in_mapped_range (pc
, osect
) && section_is_mapped (osect
))
3184 /* Function: list_overlays_command
3185 Print a list of mapped sections and their PC ranges. */
3188 list_overlays_command (const char *args
, int from_tty
)
3191 struct obj_section
*osect
;
3193 if (overlay_debugging
)
3195 for (objfile
*objfile
: current_program_space
->objfiles ())
3196 ALL_OBJFILE_OSECTIONS (objfile
, osect
)
3197 if (section_is_mapped (osect
))
3199 struct gdbarch
*gdbarch
= objfile
->arch ();
3204 vma
= bfd_section_vma (osect
->the_bfd_section
);
3205 lma
= bfd_section_lma (osect
->the_bfd_section
);
3206 size
= bfd_section_size (osect
->the_bfd_section
);
3207 name
= bfd_section_name (osect
->the_bfd_section
);
3209 printf_filtered ("Section %s, loaded at ", name
);
3210 fputs_filtered (paddress (gdbarch
, lma
), gdb_stdout
);
3211 puts_filtered (" - ");
3212 fputs_filtered (paddress (gdbarch
, lma
+ size
), gdb_stdout
);
3213 printf_filtered (", mapped at ");
3214 fputs_filtered (paddress (gdbarch
, vma
), gdb_stdout
);
3215 puts_filtered (" - ");
3216 fputs_filtered (paddress (gdbarch
, vma
+ size
), gdb_stdout
);
3217 puts_filtered ("\n");
3223 printf_filtered (_("No sections are mapped.\n"));
3226 /* Function: map_overlay_command
3227 Mark the named section as mapped (ie. residing at its VMA address). */
3230 map_overlay_command (const char *args
, int from_tty
)
3232 struct obj_section
*sec
, *sec2
;
3234 if (!overlay_debugging
)
3235 error (_("Overlay debugging not enabled. Use "
3236 "either the 'overlay auto' or\n"
3237 "the 'overlay manual' command."));
3239 if (args
== 0 || *args
== 0)
3240 error (_("Argument required: name of an overlay section"));
3242 /* First, find a section matching the user supplied argument. */
3243 for (objfile
*obj_file
: current_program_space
->objfiles ())
3244 ALL_OBJFILE_OSECTIONS (obj_file
, sec
)
3245 if (!strcmp (bfd_section_name (sec
->the_bfd_section
), args
))
3247 /* Now, check to see if the section is an overlay. */
3248 if (!section_is_overlay (sec
))
3249 continue; /* not an overlay section */
3251 /* Mark the overlay as "mapped". */
3252 sec
->ovly_mapped
= 1;
3254 /* Next, make a pass and unmap any sections that are
3255 overlapped by this new section: */
3256 for (objfile
*objfile2
: current_program_space
->objfiles ())
3257 ALL_OBJFILE_OSECTIONS (objfile2
, sec2
)
3258 if (sec2
->ovly_mapped
&& sec
!= sec2
&& sections_overlap (sec
,
3262 printf_unfiltered (_("Note: section %s unmapped by overlap\n"),
3263 bfd_section_name (sec2
->the_bfd_section
));
3264 sec2
->ovly_mapped
= 0; /* sec2 overlaps sec: unmap sec2. */
3268 error (_("No overlay section called %s"), args
);
3271 /* Function: unmap_overlay_command
3272 Mark the overlay section as unmapped
3273 (ie. resident in its LMA address range, rather than the VMA range). */
3276 unmap_overlay_command (const char *args
, int from_tty
)
3278 struct obj_section
*sec
= NULL
;
3280 if (!overlay_debugging
)
3281 error (_("Overlay debugging not enabled. "
3282 "Use either the 'overlay auto' or\n"
3283 "the 'overlay manual' command."));
3285 if (args
== 0 || *args
== 0)
3286 error (_("Argument required: name of an overlay section"));
3288 /* First, find a section matching the user supplied argument. */
3289 for (objfile
*objfile
: current_program_space
->objfiles ())
3290 ALL_OBJFILE_OSECTIONS (objfile
, sec
)
3291 if (!strcmp (bfd_section_name (sec
->the_bfd_section
), args
))
3293 if (!sec
->ovly_mapped
)
3294 error (_("Section %s is not mapped"), args
);
3295 sec
->ovly_mapped
= 0;
3298 error (_("No overlay section called %s"), args
);
3301 /* Function: overlay_auto_command
3302 A utility command to turn on overlay debugging.
3303 Possibly this should be done via a set/show command. */
3306 overlay_auto_command (const char *args
, int from_tty
)
3308 overlay_debugging
= ovly_auto
;
3309 enable_overlay_breakpoints ();
3311 printf_unfiltered (_("Automatic overlay debugging enabled."));
3314 /* Function: overlay_manual_command
3315 A utility command to turn on overlay debugging.
3316 Possibly this should be done via a set/show command. */
3319 overlay_manual_command (const char *args
, int from_tty
)
3321 overlay_debugging
= ovly_on
;
3322 disable_overlay_breakpoints ();
3324 printf_unfiltered (_("Overlay debugging enabled."));
3327 /* Function: overlay_off_command
3328 A utility command to turn on overlay debugging.
3329 Possibly this should be done via a set/show command. */
3332 overlay_off_command (const char *args
, int from_tty
)
3334 overlay_debugging
= ovly_off
;
3335 disable_overlay_breakpoints ();
3337 printf_unfiltered (_("Overlay debugging disabled."));
3341 overlay_load_command (const char *args
, int from_tty
)
3343 struct gdbarch
*gdbarch
= get_current_arch ();
3345 if (gdbarch_overlay_update_p (gdbarch
))
3346 gdbarch_overlay_update (gdbarch
, NULL
);
3348 error (_("This target does not know how to read its overlay state."));
3351 /* Command list chain containing all defined "overlay" subcommands. */
3352 static struct cmd_list_element
*overlaylist
;
3354 /* Target Overlays for the "Simplest" overlay manager:
3356 This is GDB's default target overlay layer. It works with the
3357 minimal overlay manager supplied as an example by Cygnus. The
3358 entry point is via a function pointer "gdbarch_overlay_update",
3359 so targets that use a different runtime overlay manager can
3360 substitute their own overlay_update function and take over the
3363 The overlay_update function pokes around in the target's data structures
3364 to see what overlays are mapped, and updates GDB's overlay mapping with
3367 In this simple implementation, the target data structures are as follows:
3368 unsigned _novlys; /# number of overlay sections #/
3369 unsigned _ovly_table[_novlys][4] = {
3370 {VMA, OSIZE, LMA, MAPPED}, /# one entry per overlay section #/
3371 {..., ..., ..., ...},
3373 unsigned _novly_regions; /# number of overlay regions #/
3374 unsigned _ovly_region_table[_novly_regions][3] = {
3375 {VMA, OSIZE, MAPPED_TO_LMA}, /# one entry per overlay region #/
3378 These functions will attempt to update GDB's mappedness state in the
3379 symbol section table, based on the target's mappedness state.
3381 To do this, we keep a cached copy of the target's _ovly_table, and
3382 attempt to detect when the cached copy is invalidated. The main
3383 entry point is "simple_overlay_update(SECT), which looks up SECT in
3384 the cached table and re-reads only the entry for that section from
3385 the target (whenever possible). */
3387 /* Cached, dynamically allocated copies of the target data structures: */
3388 static unsigned (*cache_ovly_table
)[4] = 0;
3389 static unsigned cache_novlys
= 0;
3390 static CORE_ADDR cache_ovly_table_base
= 0;
3393 VMA
, OSIZE
, LMA
, MAPPED
3396 /* Throw away the cached copy of _ovly_table. */
3399 simple_free_overlay_table (void)
3401 if (cache_ovly_table
)
3402 xfree (cache_ovly_table
);
3404 cache_ovly_table
= NULL
;
3405 cache_ovly_table_base
= 0;
3408 /* Read an array of ints of size SIZE from the target into a local buffer.
3409 Convert to host order. int LEN is number of ints. */
3412 read_target_long_array (CORE_ADDR memaddr
, unsigned int *myaddr
,
3413 int len
, int size
, enum bfd_endian byte_order
)
3415 /* FIXME (alloca): Not safe if array is very large. */
3416 gdb_byte
*buf
= (gdb_byte
*) alloca (len
* size
);
3419 read_memory (memaddr
, buf
, len
* size
);
3420 for (i
= 0; i
< len
; i
++)
3421 myaddr
[i
] = extract_unsigned_integer (size
* i
+ buf
, size
, byte_order
);
3424 /* Find and grab a copy of the target _ovly_table
3425 (and _novlys, which is needed for the table's size). */
3428 simple_read_overlay_table (void)
3430 struct bound_minimal_symbol novlys_msym
;
3431 struct bound_minimal_symbol ovly_table_msym
;
3432 struct gdbarch
*gdbarch
;
3434 enum bfd_endian byte_order
;
3436 simple_free_overlay_table ();
3437 novlys_msym
= lookup_minimal_symbol ("_novlys", NULL
, NULL
);
3438 if (! novlys_msym
.minsym
)
3440 error (_("Error reading inferior's overlay table: "
3441 "couldn't find `_novlys' variable\n"
3442 "in inferior. Use `overlay manual' mode."));
3446 ovly_table_msym
= lookup_bound_minimal_symbol ("_ovly_table");
3447 if (! ovly_table_msym
.minsym
)
3449 error (_("Error reading inferior's overlay table: couldn't find "
3450 "`_ovly_table' array\n"
3451 "in inferior. Use `overlay manual' mode."));
3455 gdbarch
= ovly_table_msym
.objfile
->arch ();
3456 word_size
= gdbarch_long_bit (gdbarch
) / TARGET_CHAR_BIT
;
3457 byte_order
= gdbarch_byte_order (gdbarch
);
3459 cache_novlys
= read_memory_integer (BMSYMBOL_VALUE_ADDRESS (novlys_msym
),
3462 = (unsigned int (*)[4]) xmalloc (cache_novlys
* sizeof (*cache_ovly_table
));
3463 cache_ovly_table_base
= BMSYMBOL_VALUE_ADDRESS (ovly_table_msym
);
3464 read_target_long_array (cache_ovly_table_base
,
3465 (unsigned int *) cache_ovly_table
,
3466 cache_novlys
* 4, word_size
, byte_order
);
3468 return 1; /* SUCCESS */
3471 /* Function: simple_overlay_update_1
3472 A helper function for simple_overlay_update. Assuming a cached copy
3473 of _ovly_table exists, look through it to find an entry whose vma,
3474 lma and size match those of OSECT. Re-read the entry and make sure
3475 it still matches OSECT (else the table may no longer be valid).
3476 Set OSECT's mapped state to match the entry. Return: 1 for
3477 success, 0 for failure. */
3480 simple_overlay_update_1 (struct obj_section
*osect
)
3483 asection
*bsect
= osect
->the_bfd_section
;
3484 struct gdbarch
*gdbarch
= osect
->objfile
->arch ();
3485 int word_size
= gdbarch_long_bit (gdbarch
) / TARGET_CHAR_BIT
;
3486 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
3488 for (i
= 0; i
< cache_novlys
; i
++)
3489 if (cache_ovly_table
[i
][VMA
] == bfd_section_vma (bsect
)
3490 && cache_ovly_table
[i
][LMA
] == bfd_section_lma (bsect
))
3492 read_target_long_array (cache_ovly_table_base
+ i
* word_size
,
3493 (unsigned int *) cache_ovly_table
[i
],
3494 4, word_size
, byte_order
);
3495 if (cache_ovly_table
[i
][VMA
] == bfd_section_vma (bsect
)
3496 && cache_ovly_table
[i
][LMA
] == bfd_section_lma (bsect
))
3498 osect
->ovly_mapped
= cache_ovly_table
[i
][MAPPED
];
3501 else /* Warning! Warning! Target's ovly table has changed! */
3507 /* Function: simple_overlay_update
3508 If OSECT is NULL, then update all sections' mapped state
3509 (after re-reading the entire target _ovly_table).
3510 If OSECT is non-NULL, then try to find a matching entry in the
3511 cached ovly_table and update only OSECT's mapped state.
3512 If a cached entry can't be found or the cache isn't valid, then
3513 re-read the entire cache, and go ahead and update all sections. */
3516 simple_overlay_update (struct obj_section
*osect
)
3518 /* Were we given an osect to look up? NULL means do all of them. */
3520 /* Have we got a cached copy of the target's overlay table? */
3521 if (cache_ovly_table
!= NULL
)
3523 /* Does its cached location match what's currently in the
3525 struct bound_minimal_symbol minsym
3526 = lookup_minimal_symbol ("_ovly_table", NULL
, NULL
);
3528 if (minsym
.minsym
== NULL
)
3529 error (_("Error reading inferior's overlay table: couldn't "
3530 "find `_ovly_table' array\n"
3531 "in inferior. Use `overlay manual' mode."));
3533 if (cache_ovly_table_base
== BMSYMBOL_VALUE_ADDRESS (minsym
))
3534 /* Then go ahead and try to look up this single section in
3536 if (simple_overlay_update_1 (osect
))
3537 /* Found it! We're done. */
3541 /* Cached table no good: need to read the entire table anew.
3542 Or else we want all the sections, in which case it's actually
3543 more efficient to read the whole table in one block anyway. */
3545 if (! simple_read_overlay_table ())
3548 /* Now may as well update all sections, even if only one was requested. */
3549 for (objfile
*objfile
: current_program_space
->objfiles ())
3550 ALL_OBJFILE_OSECTIONS (objfile
, osect
)
3551 if (section_is_overlay (osect
))
3554 asection
*bsect
= osect
->the_bfd_section
;
3556 for (i
= 0; i
< cache_novlys
; i
++)
3557 if (cache_ovly_table
[i
][VMA
] == bfd_section_vma (bsect
)
3558 && cache_ovly_table
[i
][LMA
] == bfd_section_lma (bsect
))
3559 { /* obj_section matches i'th entry in ovly_table. */
3560 osect
->ovly_mapped
= cache_ovly_table
[i
][MAPPED
];
3561 break; /* finished with inner for loop: break out. */
3566 /* Set the output sections and output offsets for section SECTP in
3567 ABFD. The relocation code in BFD will read these offsets, so we
3568 need to be sure they're initialized. We map each section to itself,
3569 with no offset; this means that SECTP->vma will be honored. */
3572 symfile_dummy_outputs (bfd
*abfd
, asection
*sectp
, void *dummy
)
3574 sectp
->output_section
= sectp
;
3575 sectp
->output_offset
= 0;
3578 /* Default implementation for sym_relocate. */
3581 default_symfile_relocate (struct objfile
*objfile
, asection
*sectp
,
3584 /* Use sectp->owner instead of objfile->obfd. sectp may point to a
3586 bfd
*abfd
= sectp
->owner
;
3588 /* We're only interested in sections with relocation
3590 if ((sectp
->flags
& SEC_RELOC
) == 0)
3593 /* We will handle section offsets properly elsewhere, so relocate as if
3594 all sections begin at 0. */
3595 bfd_map_over_sections (abfd
, symfile_dummy_outputs
, NULL
);
3597 return bfd_simple_get_relocated_section_contents (abfd
, sectp
, buf
, NULL
);
3600 /* Relocate the contents of a debug section SECTP in ABFD. The
3601 contents are stored in BUF if it is non-NULL, or returned in a
3602 malloc'd buffer otherwise.
3604 For some platforms and debug info formats, shared libraries contain
3605 relocations against the debug sections (particularly for DWARF-2;
3606 one affected platform is PowerPC GNU/Linux, although it depends on
3607 the version of the linker in use). Also, ELF object files naturally
3608 have unresolved relocations for their debug sections. We need to apply
3609 the relocations in order to get the locations of symbols correct.
3610 Another example that may require relocation processing, is the
3611 DWARF-2 .eh_frame section in .o files, although it isn't strictly a
3615 symfile_relocate_debug_section (struct objfile
*objfile
,
3616 asection
*sectp
, bfd_byte
*buf
)
3618 gdb_assert (objfile
->sf
->sym_relocate
);
3620 return (*objfile
->sf
->sym_relocate
) (objfile
, sectp
, buf
);
3623 symfile_segment_data_up
3624 get_symfile_segment_data (bfd
*abfd
)
3626 const struct sym_fns
*sf
= find_sym_fns (abfd
);
3631 return sf
->sym_segments (abfd
);
3635 - DATA, containing segment addresses from the object file ABFD, and
3636 the mapping from ABFD's sections onto the segments that own them,
3638 - SEGMENT_BASES[0 .. NUM_SEGMENT_BASES - 1], holding the actual
3639 segment addresses reported by the target,
3640 store the appropriate offsets for each section in OFFSETS.
3642 If there are fewer entries in SEGMENT_BASES than there are segments
3643 in DATA, then apply SEGMENT_BASES' last entry to all the segments.
3645 If there are more entries, then ignore the extra. The target may
3646 not be able to distinguish between an empty data segment and a
3647 missing data segment; a missing text segment is less plausible. */
3650 symfile_map_offsets_to_segments (bfd
*abfd
,
3651 const struct symfile_segment_data
*data
,
3652 section_offsets
&offsets
,
3653 int num_segment_bases
,
3654 const CORE_ADDR
*segment_bases
)
3659 /* It doesn't make sense to call this function unless you have some
3660 segment base addresses. */
3661 gdb_assert (num_segment_bases
> 0);
3663 /* If we do not have segment mappings for the object file, we
3664 can not relocate it by segments. */
3665 gdb_assert (data
!= NULL
);
3666 gdb_assert (data
->num_segments
> 0);
3668 for (i
= 0, sect
= abfd
->sections
; sect
!= NULL
; i
++, sect
= sect
->next
)
3670 int which
= data
->segment_info
[i
];
3672 gdb_assert (0 <= which
&& which
<= data
->num_segments
);
3674 /* Don't bother computing offsets for sections that aren't
3675 loaded as part of any segment. */
3679 /* Use the last SEGMENT_BASES entry as the address of any extra
3680 segments mentioned in DATA->segment_info. */
3681 if (which
> num_segment_bases
)
3682 which
= num_segment_bases
;
3684 offsets
[i
] = segment_bases
[which
- 1] - data
->segment_bases
[which
- 1];
3691 symfile_find_segment_sections (struct objfile
*objfile
)
3693 bfd
*abfd
= objfile
->obfd
;
3697 symfile_segment_data_up data
3698 = get_symfile_segment_data (objfile
->obfd
);
3702 if (data
->num_segments
!= 1 && data
->num_segments
!= 2)
3705 for (i
= 0, sect
= abfd
->sections
; sect
!= NULL
; i
++, sect
= sect
->next
)
3707 int which
= data
->segment_info
[i
];
3711 if (objfile
->sect_index_text
== -1)
3712 objfile
->sect_index_text
= sect
->index
;
3714 if (objfile
->sect_index_rodata
== -1)
3715 objfile
->sect_index_rodata
= sect
->index
;
3717 else if (which
== 2)
3719 if (objfile
->sect_index_data
== -1)
3720 objfile
->sect_index_data
= sect
->index
;
3722 if (objfile
->sect_index_bss
== -1)
3723 objfile
->sect_index_bss
= sect
->index
;
3728 /* Listen for free_objfile events. */
3731 symfile_free_objfile (struct objfile
*objfile
)
3733 /* Remove the target sections owned by this objfile. */
3734 if (objfile
!= NULL
)
3735 remove_target_sections ((void *) objfile
);
3738 /* Wrapper around the quick_symbol_functions expand_symtabs_matching "method".
3739 Expand all symtabs that match the specified criteria.
3740 See quick_symbol_functions.expand_symtabs_matching for details. */
3743 expand_symtabs_matching
3744 (gdb::function_view
<expand_symtabs_file_matcher_ftype
> file_matcher
,
3745 const lookup_name_info
&lookup_name
,
3746 gdb::function_view
<expand_symtabs_symbol_matcher_ftype
> symbol_matcher
,
3747 gdb::function_view
<expand_symtabs_exp_notify_ftype
> expansion_notify
,
3748 enum search_domain kind
)
3750 for (objfile
*objfile
: current_program_space
->objfiles ())
3753 objfile
->sf
->qf
->expand_symtabs_matching (objfile
, file_matcher
,
3756 expansion_notify
, kind
);
3760 /* Wrapper around the quick_symbol_functions map_symbol_filenames "method".
3761 Map function FUN over every file.
3762 See quick_symbol_functions.map_symbol_filenames for details. */
3765 map_symbol_filenames (symbol_filename_ftype
*fun
, void *data
,
3768 for (objfile
*objfile
: current_program_space
->objfiles ())
3771 objfile
->sf
->qf
->map_symbol_filenames (objfile
, fun
, data
,
3778 namespace selftests
{
3779 namespace filename_language
{
3781 static void test_filename_language ()
3783 /* This test messes up the filename_language_table global. */
3784 scoped_restore restore_flt
= make_scoped_restore (&filename_language_table
);
3786 /* Test deducing an unknown extension. */
3787 language lang
= deduce_language_from_filename ("myfile.blah");
3788 SELF_CHECK (lang
== language_unknown
);
3790 /* Test deducing a known extension. */
3791 lang
= deduce_language_from_filename ("myfile.c");
3792 SELF_CHECK (lang
== language_c
);
3794 /* Test adding a new extension using the internal API. */
3795 add_filename_language (".blah", language_pascal
);
3796 lang
= deduce_language_from_filename ("myfile.blah");
3797 SELF_CHECK (lang
== language_pascal
);
3801 test_set_ext_lang_command ()
3803 /* This test messes up the filename_language_table global. */
3804 scoped_restore restore_flt
= make_scoped_restore (&filename_language_table
);
3806 /* Confirm that the .hello extension is not known. */
3807 language lang
= deduce_language_from_filename ("cake.hello");
3808 SELF_CHECK (lang
== language_unknown
);
3810 /* Test adding a new extension using the CLI command. */
3811 auto args_holder
= make_unique_xstrdup (".hello rust");
3812 ext_args
= args_holder
.get ();
3813 set_ext_lang_command (NULL
, 1, NULL
);
3815 lang
= deduce_language_from_filename ("cake.hello");
3816 SELF_CHECK (lang
== language_rust
);
3818 /* Test overriding an existing extension using the CLI command. */
3819 int size_before
= filename_language_table
.size ();
3820 args_holder
.reset (xstrdup (".hello pascal"));
3821 ext_args
= args_holder
.get ();
3822 set_ext_lang_command (NULL
, 1, NULL
);
3823 int size_after
= filename_language_table
.size ();
3825 lang
= deduce_language_from_filename ("cake.hello");
3826 SELF_CHECK (lang
== language_pascal
);
3827 SELF_CHECK (size_before
== size_after
);
3830 } /* namespace filename_language */
3831 } /* namespace selftests */
3833 #endif /* GDB_SELF_TEST */
3835 void _initialize_symfile ();
3837 _initialize_symfile ()
3839 struct cmd_list_element
*c
;
3841 gdb::observers::free_objfile
.attach (symfile_free_objfile
);
3843 #define READNOW_READNEVER_HELP \
3844 "The '-readnow' option will cause GDB to read the entire symbol file\n\
3845 immediately. This makes the command slower, but may make future operations\n\
3847 The '-readnever' option will prevent GDB from reading the symbol file's\n\
3848 symbolic debug information."
3850 c
= add_cmd ("symbol-file", class_files
, symbol_file_command
, _("\
3851 Load symbol table from executable file FILE.\n\
3852 Usage: symbol-file [-readnow | -readnever] [-o OFF] FILE\n\
3853 OFF is an optional offset which is added to each section address.\n\
3854 The `file' command can also load symbol tables, as well as setting the file\n\
3855 to execute.\n" READNOW_READNEVER_HELP
), &cmdlist
);
3856 set_cmd_completer (c
, filename_completer
);
3858 c
= add_cmd ("add-symbol-file", class_files
, add_symbol_file_command
, _("\
3859 Load symbols from FILE, assuming FILE has been dynamically loaded.\n\
3860 Usage: add-symbol-file FILE [-readnow | -readnever] [-o OFF] [ADDR] \
3861 [-s SECT-NAME SECT-ADDR]...\n\
3862 ADDR is the starting address of the file's text.\n\
3863 Each '-s' argument provides a section name and address, and\n\
3864 should be specified if the data and bss segments are not contiguous\n\
3865 with the text. SECT-NAME is a section name to be loaded at SECT-ADDR.\n\
3866 OFF is an optional offset which is added to the default load addresses\n\
3867 of all sections for which no other address was specified.\n"
3868 READNOW_READNEVER_HELP
),
3870 set_cmd_completer (c
, filename_completer
);
3872 c
= add_cmd ("remove-symbol-file", class_files
,
3873 remove_symbol_file_command
, _("\
3874 Remove a symbol file added via the add-symbol-file command.\n\
3875 Usage: remove-symbol-file FILENAME\n\
3876 remove-symbol-file -a ADDRESS\n\
3877 The file to remove can be identified by its filename or by an address\n\
3878 that lies within the boundaries of this symbol file in memory."),
3881 c
= add_cmd ("load", class_files
, load_command
, _("\
3882 Dynamically load FILE into the running program.\n\
3883 FILE symbols are recorded for access from GDB.\n\
3884 Usage: load [FILE] [OFFSET]\n\
3885 An optional load OFFSET may also be given as a literal address.\n\
3886 When OFFSET is provided, FILE must also be provided. FILE can be provided\n\
3887 on its own."), &cmdlist
);
3888 set_cmd_completer (c
, filename_completer
);
3890 add_basic_prefix_cmd ("overlay", class_support
,
3891 _("Commands for debugging overlays."), &overlaylist
,
3892 "overlay ", 0, &cmdlist
);
3894 add_com_alias ("ovly", "overlay", class_support
, 1);
3895 add_com_alias ("ov", "overlay", class_support
, 1);
3897 add_cmd ("map-overlay", class_support
, map_overlay_command
,
3898 _("Assert that an overlay section is mapped."), &overlaylist
);
3900 add_cmd ("unmap-overlay", class_support
, unmap_overlay_command
,
3901 _("Assert that an overlay section is unmapped."), &overlaylist
);
3903 add_cmd ("list-overlays", class_support
, list_overlays_command
,
3904 _("List mappings of overlay sections."), &overlaylist
);
3906 add_cmd ("manual", class_support
, overlay_manual_command
,
3907 _("Enable overlay debugging."), &overlaylist
);
3908 add_cmd ("off", class_support
, overlay_off_command
,
3909 _("Disable overlay debugging."), &overlaylist
);
3910 add_cmd ("auto", class_support
, overlay_auto_command
,
3911 _("Enable automatic overlay debugging."), &overlaylist
);
3912 add_cmd ("load-target", class_support
, overlay_load_command
,
3913 _("Read the overlay mapping state from the target."), &overlaylist
);
3915 /* Filename extension to source language lookup table: */
3916 add_setshow_string_noescape_cmd ("extension-language", class_files
,
3918 Set mapping between filename extension and source language."), _("\
3919 Show mapping between filename extension and source language."), _("\
3920 Usage: set extension-language .foo bar"),
3921 set_ext_lang_command
,
3923 &setlist
, &showlist
);
3925 add_info ("extensions", info_ext_lang_command
,
3926 _("All filename extensions associated with a source language."));
3928 add_setshow_optional_filename_cmd ("debug-file-directory", class_support
,
3929 &debug_file_directory
, _("\
3930 Set the directories where separate debug symbols are searched for."), _("\
3931 Show the directories where separate debug symbols are searched for."), _("\
3932 Separate debug symbols are first searched for in the same\n\
3933 directory as the binary, then in the `" DEBUG_SUBDIRECTORY
"' subdirectory,\n\
3934 and lastly at the path of the directory of the binary with\n\
3935 each global debug-file-directory component prepended."),
3937 show_debug_file_directory
,
3938 &setlist
, &showlist
);
3940 add_setshow_enum_cmd ("symbol-loading", no_class
,
3941 print_symbol_loading_enums
, &print_symbol_loading
,
3943 Set printing of symbol loading messages."), _("\
3944 Show printing of symbol loading messages."), _("\
3945 off == turn all messages off\n\
3946 brief == print messages for the executable,\n\
3947 and brief messages for shared libraries\n\
3948 full == print messages for the executable,\n\
3949 and messages for each shared library."),
3952 &setprintlist
, &showprintlist
);
3954 add_setshow_boolean_cmd ("separate-debug-file", no_class
,
3955 &separate_debug_file_debug
, _("\
3956 Set printing of separate debug info file search debug."), _("\
3957 Show printing of separate debug info file search debug."), _("\
3958 When on, GDB prints the searched locations while looking for separate debug \
3959 info files."), NULL
, NULL
, &setdebuglist
, &showdebuglist
);
3962 selftests::register_test
3963 ("filename_language", selftests::filename_language::test_filename_language
);
3964 selftests::register_test
3965 ("set_ext_lang_command",
3966 selftests::filename_language::test_set_ext_lang_command
);