gdb/target.h

   1 /* Interface between GDB and target environments, including files and processes
   2
   3    Copyright (C) 1990-2014 Free Software Foundation, Inc.
   4
   5    Contributed by Cygnus Support.  Written by John Gilmore.
   6
   7    This file is part of GDB.
   8
   9    This program is free software; you can redistribute it and/or modify
  10    it under the terms of the GNU General Public License as published by
  11    the Free Software Foundation; either version 3 of the License, or
  12    (at your option) any later version.
  13
  14    This program is distributed in the hope that it will be useful,
  15    but WITHOUT ANY WARRANTY; without even the implied warranty of
  16    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17    GNU General Public License for more details.
  18
  19    You should have received a copy of the GNU General Public License
  20    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
  21
  22 #if !defined (TARGET_H)
  23 #define TARGET_H
  24
  25 struct objfile;
  26 struct ui_file;
  27 struct mem_attrib;
  28 struct target_ops;
  29 struct bp_location;
  30 struct bp_target_info;
  31 struct regcache;
  32 struct target_section_table;
  33 struct trace_state_variable;
  34 struct trace_status;
  35 struct uploaded_tsv;
  36 struct uploaded_tp;
  37 struct static_tracepoint_marker;
  38 struct traceframe_info;
  39 struct expression;
  40 struct dcache_struct;
  41
  42 /* This include file defines the interface between the main part
  43    of the debugger, and the part which is target-specific, or
  44    specific to the communications interface between us and the
  45    target.
  46
  47    A TARGET is an interface between the debugger and a particular
  48    kind of file or process.  Targets can be STACKED in STRATA,
  49    so that more than one target can potentially respond to a request.
  50    In particular, memory accesses will walk down the stack of targets
  51    until they find a target that is interested in handling that particular
  52    address.  STRATA are artificial boundaries on the stack, within
  53    which particular kinds of targets live.  Strata exist so that
  54    people don't get confused by pushing e.g. a process target and then
  55    a file target, and wondering why they can't see the current values
  56    of variables any more (the file target is handling them and they
  57    never get to the process target).  So when you push a file target,
  58    it goes into the file stratum, which is always below the process
  59    stratum.  */
  60
  61 #include "target/resume.h"
  62 #include "target/wait.h"
  63 #include "target/waitstatus.h"
  64 #include "bfd.h"
  65 #include "symtab.h"
  66 #include "memattr.h"
  67 #include "vec.h"
  68 #include "gdb_signals.h"
  69 #include "btrace.h"
  70 #include "command.h"
  71
  72 enum strata
  73   {
  74     dummy_stratum,              /* The lowest of the low */
  75     file_stratum,               /* Executable files, etc */
  76     process_stratum,            /* Executing processes or core dump files */
  77     thread_stratum,             /* Executing threads */
  78     record_stratum,             /* Support record debugging */
  79     arch_stratum                /* Architecture overrides */
  80   };
  81
  82 enum thread_control_capabilities
  83   {
  84     tc_none = 0,                /* Default: can't control thread execution.  */
  85     tc_schedlock = 1,           /* Can lock the thread scheduler.  */
  86   };
  87
  88 /* The structure below stores information about a system call.
  89    It is basically used in the "catch syscall" command, and in
  90    every function that gives information about a system call.
  91
  92    It's also good to mention that its fields represent everything
  93    that we currently know about a syscall in GDB.  */
  94 struct syscall
  95   {
  96     /* The syscall number.  */
  97     int number;
  98
  99     /* The syscall name.  */
 100     const char *name;
 101   };
 102
 103 /* Return a pretty printed form of target_waitstatus.
 104    Space for the result is malloc'd, caller must free.  */
 105 extern char *target_waitstatus_to_string (const struct target_waitstatus *);
 106
 107 /* Return a pretty printed form of TARGET_OPTIONS.
 108    Space for the result is malloc'd, caller must free.  */
 109 extern char *target_options_to_string (int target_options);
 110
 111 /* Possible types of events that the inferior handler will have to
 112    deal with.  */
 113 enum inferior_event_type
 114   {
 115     /* Process a normal inferior event which will result in target_wait
 116        being called.  */
 117     INF_REG_EVENT,
 118     /* We are called because a timer went off.  */
 119     INF_TIMER,
 120     /* We are called to do stuff after the inferior stops.  */
 121     INF_EXEC_COMPLETE,
 122     /* We are called to do some stuff after the inferior stops, but we
 123        are expected to reenter the proceed() and
 124        handle_inferior_event() functions.  This is used only in case of
 125        'step n' like commands.  */
 126     INF_EXEC_CONTINUE
 127   };
 128 \f
 129 /* Target objects which can be transfered using target_read,
 130    target_write, et cetera.  */
 131
 132 enum target_object
 133 {
 134   /* AVR target specific transfer.  See "avr-tdep.c" and "remote.c".  */
 135   TARGET_OBJECT_AVR,
 136   /* SPU target specific transfer.  See "spu-tdep.c".  */
 137   TARGET_OBJECT_SPU,
 138   /* Transfer up-to LEN bytes of memory starting at OFFSET.  */
 139   TARGET_OBJECT_MEMORY,
 140   /* Memory, avoiding GDB's data cache and trusting the executable.
 141      Target implementations of to_xfer_partial never need to handle
 142      this object, and most callers should not use it.  */
 143   TARGET_OBJECT_RAW_MEMORY,
 144   /* Memory known to be part of the target's stack.  This is cached even
 145      if it is not in a region marked as such, since it is known to be
 146      "normal" RAM.  */
 147   TARGET_OBJECT_STACK_MEMORY,
 148   /* Memory known to be part of the target code.   This is cached even
 149      if it is not in a region marked as such.  */
 150   TARGET_OBJECT_CODE_MEMORY,
 151   /* Kernel Unwind Table.  See "ia64-tdep.c".  */
 152   TARGET_OBJECT_UNWIND_TABLE,
 153   /* Transfer auxilliary vector.  */
 154   TARGET_OBJECT_AUXV,
 155   /* StackGhost cookie.  See "sparc-tdep.c".  */
 156   TARGET_OBJECT_WCOOKIE,
 157   /* Target memory map in XML format.  */
 158   TARGET_OBJECT_MEMORY_MAP,
 159   /* Flash memory.  This object can be used to write contents to
 160      a previously erased flash memory.  Using it without erasing
 161      flash can have unexpected results.  Addresses are physical
 162      address on target, and not relative to flash start.  */
 163   TARGET_OBJECT_FLASH,
 164   /* Available target-specific features, e.g. registers and coprocessors.
 165      See "target-descriptions.c".  ANNEX should never be empty.  */
 166   TARGET_OBJECT_AVAILABLE_FEATURES,
 167   /* Currently loaded libraries, in XML format.  */
 168   TARGET_OBJECT_LIBRARIES,
 169   /* Currently loaded libraries specific for SVR4 systems, in XML format.  */
 170   TARGET_OBJECT_LIBRARIES_SVR4,
 171   /* Currently loaded libraries specific to AIX systems, in XML format.  */
 172   TARGET_OBJECT_LIBRARIES_AIX,
 173   /* Get OS specific data.  The ANNEX specifies the type (running
 174      processes, etc.).  The data being transfered is expected to follow
 175      the DTD specified in features/osdata.dtd.  */
 176   TARGET_OBJECT_OSDATA,
 177   /* Extra signal info.  Usually the contents of `siginfo_t' on unix
 178      platforms.  */
 179   TARGET_OBJECT_SIGNAL_INFO,
 180   /* The list of threads that are being debugged.  */
 181   TARGET_OBJECT_THREADS,
 182   /* Collected static trace data.  */
 183   TARGET_OBJECT_STATIC_TRACE_DATA,
 184   /* The HP-UX registers (those that can be obtained or modified by using
 185      the TT_LWP_RUREGS/TT_LWP_WUREGS ttrace requests).  */
 186   TARGET_OBJECT_HPUX_UREGS,
 187   /* The HP-UX shared library linkage pointer.  ANNEX should be a string
 188      image of the code address whose linkage pointer we are looking for.
 189
 190      The size of the data transfered is always 8 bytes (the size of an
 191      address on ia64).  */
 192   TARGET_OBJECT_HPUX_SOLIB_GOT,
 193   /* Traceframe info, in XML format.  */
 194   TARGET_OBJECT_TRACEFRAME_INFO,
 195   /* Load maps for FDPIC systems.  */
 196   TARGET_OBJECT_FDPIC,
 197   /* Darwin dynamic linker info data.  */
 198   TARGET_OBJECT_DARWIN_DYLD_INFO,
 199   /* OpenVMS Unwind Information Block.  */
 200   TARGET_OBJECT_OPENVMS_UIB,
 201   /* Branch trace data, in XML format.  */
 202   TARGET_OBJECT_BTRACE
 203   /* Possible future objects: TARGET_OBJECT_FILE, ...  */
 204 };
 205
 206 /* Possible values returned by target_xfer_partial, etc.  */
 207
 208 enum target_xfer_status
 209 {
 210   /* Some bytes are transferred.  */
 211   TARGET_XFER_OK = 1,
 212
 213   /* No further transfer is possible.  */
 214   TARGET_XFER_EOF = 0,
 215
 216   /* Generic I/O error.  Note that it's important that this is '-1',
 217      as we still have target_xfer-related code returning hardcoded
 218      '-1' on error.  */
 219   TARGET_XFER_E_IO = -1,
 220
 221   /* Transfer failed because the piece of the object requested is
 222      unavailable.  */
 223   TARGET_XFER_E_UNAVAILABLE = -2,
 224
 225   /* Keep list in sync with target_xfer_error_to_string.  */
 226 };
 227
 228 #define TARGET_XFER_STATUS_ERROR_P(STATUS) ((STATUS) < TARGET_XFER_EOF)
 229
 230 /* Return the string form of ERR.  */
 231
 232 extern const char *target_xfer_status_to_string (enum target_xfer_status err);
 233
 234 /* Enumeration of the kinds of traceframe searches that a target may
 235    be able to perform.  */
 236
 237 enum trace_find_type
 238   {
 239     tfind_number,
 240     tfind_pc,
 241     tfind_tp,
 242     tfind_range,
 243     tfind_outside,
 244   };
 245
 246 typedef struct static_tracepoint_marker *static_tracepoint_marker_p;
 247 DEF_VEC_P(static_tracepoint_marker_p);
 248
 249 typedef enum target_xfer_status
 250   target_xfer_partial_ftype (struct target_ops *ops,
 251                              enum target_object object,
 252                              const char *annex,
 253                              gdb_byte *readbuf,
 254                              const gdb_byte *writebuf,
 255                              ULONGEST offset,
 256                              ULONGEST len,
 257                              ULONGEST *xfered_len);
 258
 259 /* Request that OPS transfer up to LEN 8-bit bytes of the target's
 260    OBJECT.  The OFFSET, for a seekable object, specifies the
 261    starting point.  The ANNEX can be used to provide additional
 262    data-specific information to the target.
 263
 264    Return the number of bytes actually transfered, or a negative error
 265    code (an 'enum target_xfer_error' value) if the transfer is not
 266    supported or otherwise fails.  Return of a positive value less than
 267    LEN indicates that no further transfer is possible.  Unlike the raw
 268    to_xfer_partial interface, callers of these functions do not need
 269    to retry partial transfers.  */
 270
 271 extern LONGEST target_read (struct target_ops *ops,
 272                             enum target_object object,
 273                             const char *annex, gdb_byte *buf,
 274                             ULONGEST offset, LONGEST len);
 275
 276 struct memory_read_result
 277   {
 278     /* First address that was read.  */
 279     ULONGEST begin;
 280     /* Past-the-end address.  */
 281     ULONGEST end;
 282     /* The data.  */
 283     gdb_byte *data;
 284 };
 285 typedef struct memory_read_result memory_read_result_s;
 286 DEF_VEC_O(memory_read_result_s);
 287
 288 extern void free_memory_read_result_vector (void *);
 289
 290 extern VEC(memory_read_result_s)* read_memory_robust (struct target_ops *ops,
 291                                                       ULONGEST offset,
 292                                                       LONGEST len);
 293
 294 extern LONGEST target_write (struct target_ops *ops,
 295                              enum target_object object,
 296                              const char *annex, const gdb_byte *buf,
 297                              ULONGEST offset, LONGEST len);
 298
 299 /* Similar to target_write, except that it also calls PROGRESS with
 300    the number of bytes written and the opaque BATON after every
 301    successful partial write (and before the first write).  This is
 302    useful for progress reporting and user interaction while writing
 303    data.  To abort the transfer, the progress callback can throw an
 304    exception.  */
 305
 306 LONGEST target_write_with_progress (struct target_ops *ops,
 307                                     enum target_object object,
 308                                     const char *annex, const gdb_byte *buf,
 309                                     ULONGEST offset, LONGEST len,
 310                                     void (*progress) (ULONGEST, void *),
 311                                     void *baton);
 312
 313 /* Wrapper to perform a full read of unknown size.  OBJECT/ANNEX will
 314    be read using OPS.  The return value will be -1 if the transfer
 315    fails or is not supported; 0 if the object is empty; or the length
 316    of the object otherwise.  If a positive value is returned, a
 317    sufficiently large buffer will be allocated using xmalloc and
 318    returned in *BUF_P containing the contents of the object.
 319
 320    This method should be used for objects sufficiently small to store
 321    in a single xmalloc'd buffer, when no fixed bound on the object's
 322    size is known in advance.  Don't try to read TARGET_OBJECT_MEMORY
 323    through this function.  */
 324
 325 extern LONGEST target_read_alloc (struct target_ops *ops,
 326                                   enum target_object object,
 327                                   const char *annex, gdb_byte **buf_p);
 328
 329 /* Read OBJECT/ANNEX using OPS.  The result is NUL-terminated and
 330    returned as a string, allocated using xmalloc.  If an error occurs
 331    or the transfer is unsupported, NULL is returned.  Empty objects
 332    are returned as allocated but empty strings.  A warning is issued
 333    if the result contains any embedded NUL bytes.  */
 334
 335 extern char *target_read_stralloc (struct target_ops *ops,
 336                                    enum target_object object,
 337                                    const char *annex);
 338
 339 /* See target_ops->to_xfer_partial.  */
 340 extern target_xfer_partial_ftype target_xfer_partial;
 341
 342 /* Wrappers to target read/write that perform memory transfers.  They
 343    throw an error if the memory transfer fails.
 344
 345    NOTE: cagney/2003-10-23: The naming schema is lifted from
 346    "frame.h".  The parameter order is lifted from get_frame_memory,
 347    which in turn lifted it from read_memory.  */
 348
 349 extern void get_target_memory (struct target_ops *ops, CORE_ADDR addr,
 350                                gdb_byte *buf, LONGEST len);
 351 extern ULONGEST get_target_memory_unsigned (struct target_ops *ops,
 352                                             CORE_ADDR addr, int len,
 353                                             enum bfd_endian byte_order);
 354 \f
 355 struct thread_info;             /* fwd decl for parameter list below: */
 356
 357 /* The type of the callback to the to_async method.  */
 358
 359 typedef void async_callback_ftype (enum inferior_event_type event_type,
 360                                    void *context);
 361
 362 /* These defines are used to mark target_ops methods.  The script
 363    make-target-delegates scans these and auto-generates the base
 364    method implementations.  There are four macros that can be used:
 365
 366    1. TARGET_DEFAULT_IGNORE.  There is no argument.  The base method
 367    does nothing.  This is only valid if the method return type is
 368    'void'.
 369
 370    2. TARGET_DEFAULT_NORETURN.  The argument is a function call, like
 371    'tcomplain ()'.  The base method simply makes this call, which is
 372    assumed not to return.
 373
 374    3. TARGET_DEFAULT_RETURN.  The argument is a C expression.  The
 375    base method returns this expression's value.
 376
 377    4. TARGET_DEFAULT_FUNC.  The argument is the name of a function.
 378    make-target-delegates does not generate a base method in this case,
 379    but instead uses the argument function as the base method.  */
 380
 381 #define TARGET_DEFAULT_IGNORE()
 382 #define TARGET_DEFAULT_NORETURN(ARG)
 383 #define TARGET_DEFAULT_RETURN(ARG)
 384 #define TARGET_DEFAULT_FUNC(ARG)
 385
 386 struct target_ops
 387   {
 388     struct target_ops *beneath; /* To the target under this one.  */
 389     char *to_shortname;         /* Name this target type */
 390     char *to_longname;          /* Name for printing */
 391     char *to_doc;               /* Documentation.  Does not include trailing
 392                                    newline, and starts with a one-line descrip-
 393                                    tion (probably similar to to_longname).  */
 394     /* Per-target scratch pad.  */
 395     void *to_data;
 396     /* The open routine takes the rest of the parameters from the
 397        command, and (if successful) pushes a new target onto the
 398        stack.  Targets should supply this routine, if only to provide
 399        an error message.  */
 400     void (*to_open) (char *, int);
 401     /* Old targets with a static target vector provide "to_close".
 402        New re-entrant targets provide "to_xclose" and that is expected
 403        to xfree everything (including the "struct target_ops").  */
 404     void (*to_xclose) (struct target_ops *targ);
 405     void (*to_close) (struct target_ops *);
 406     void (*to_attach) (struct target_ops *ops, char *, int);
 407     void (*to_post_attach) (struct target_ops *, int);
 408     void (*to_detach) (struct target_ops *ops, const char *, int);
 409     void (*to_disconnect) (struct target_ops *, char *, int);
 410     void (*to_resume) (struct target_ops *, ptid_t, int, enum gdb_signal)
 411       TARGET_DEFAULT_NORETURN (noprocess ());
 412     ptid_t (*to_wait) (struct target_ops *,
 413                        ptid_t, struct target_waitstatus *, int)
 414       TARGET_DEFAULT_NORETURN (noprocess ());
 415     void (*to_fetch_registers) (struct target_ops *, struct regcache *, int);
 416     void (*to_store_registers) (struct target_ops *, struct regcache *, int)
 417       TARGET_DEFAULT_NORETURN (noprocess ());
 418     void (*to_prepare_to_store) (struct target_ops *, struct regcache *);
 419
 420     /* Transfer LEN bytes of memory between GDB address MYADDR and
 421        target address MEMADDR.  If WRITE, transfer them to the target, else
 422        transfer them from the target.  TARGET is the target from which we
 423        get this function.
 424
 425        Return value, N, is one of the following:
 426
 427        0 means that we can't handle this.  If errno has been set, it is the
 428        error which prevented us from doing it (FIXME: What about bfd_error?).
 429
 430        positive (call it N) means that we have transferred N bytes
 431        starting at MEMADDR.  We might be able to handle more bytes
 432        beyond this length, but no promises.
 433
 434        negative (call its absolute value N) means that we cannot
 435        transfer right at MEMADDR, but we could transfer at least
 436        something at MEMADDR + N.
 437
 438        NOTE: cagney/2004-10-01: This has been entirely superseeded by
 439        to_xfer_partial and inferior inheritance.  */
 440
 441     int (*deprecated_xfer_memory) (CORE_ADDR memaddr, gdb_byte *myaddr,
 442                                    int len, int write,
 443                                    struct mem_attrib *attrib,
 444                                    struct target_ops *target);
 445
 446     void (*to_files_info) (struct target_ops *);
 447     int (*to_insert_breakpoint) (struct target_ops *, struct gdbarch *,
 448                                  struct bp_target_info *)
 449       TARGET_DEFAULT_FUNC (memory_insert_breakpoint);
 450     int (*to_remove_breakpoint) (struct target_ops *, struct gdbarch *,
 451                                  struct bp_target_info *)
 452       TARGET_DEFAULT_FUNC (memory_remove_breakpoint);
 453     int (*to_can_use_hw_breakpoint) (struct target_ops *, int, int, int);
 454     int (*to_ranged_break_num_registers) (struct target_ops *);
 455     int (*to_insert_hw_breakpoint) (struct target_ops *,
 456                                     struct gdbarch *, struct bp_target_info *);
 457     int (*to_remove_hw_breakpoint) (struct target_ops *,
 458                                     struct gdbarch *, struct bp_target_info *);
 459
 460     /* Documentation of what the two routines below are expected to do is
 461        provided with the corresponding target_* macros.  */
 462     int (*to_remove_watchpoint) (struct target_ops *,
 463                                  CORE_ADDR, int, int, struct expression *);
 464     int (*to_insert_watchpoint) (struct target_ops *,
 465                                  CORE_ADDR, int, int, struct expression *);
 466
 467     int (*to_insert_mask_watchpoint) (struct target_ops *,
 468                                       CORE_ADDR, CORE_ADDR, int);
 469     int (*to_remove_mask_watchpoint) (struct target_ops *,
 470                                       CORE_ADDR, CORE_ADDR, int);
 471     int (*to_stopped_by_watchpoint) (struct target_ops *)
 472       TARGET_DEFAULT_RETURN (0);
 473     int to_have_steppable_watchpoint;
 474     int to_have_continuable_watchpoint;
 475     int (*to_stopped_data_address) (struct target_ops *, CORE_ADDR *)
 476       TARGET_DEFAULT_RETURN (0);
 477     int (*to_watchpoint_addr_within_range) (struct target_ops *,
 478                                             CORE_ADDR, CORE_ADDR, int);
 479
 480     /* Documentation of this routine is provided with the corresponding
 481        target_* macro.  */
 482     int (*to_region_ok_for_hw_watchpoint) (struct target_ops *,
 483                                            CORE_ADDR, int);
 484
 485     int (*to_can_accel_watchpoint_condition) (struct target_ops *,
 486                                               CORE_ADDR, int, int,
 487                                               struct expression *);
 488     int (*to_masked_watch_num_registers) (struct target_ops *,
 489                                           CORE_ADDR, CORE_ADDR);
 490     void (*to_terminal_init) (struct target_ops *);
 491     void (*to_terminal_inferior) (struct target_ops *);
 492     void (*to_terminal_ours_for_output) (struct target_ops *);
 493     void (*to_terminal_ours) (struct target_ops *);
 494     void (*to_terminal_save_ours) (struct target_ops *);
 495     void (*to_terminal_info) (struct target_ops *, const char *, int);
 496     void (*to_kill) (struct target_ops *);
 497     void (*to_load) (struct target_ops *, char *, int);
 498     void (*to_create_inferior) (struct target_ops *,
 499                                 char *, char *, char **, int);
 500     void (*to_post_startup_inferior) (struct target_ops *, ptid_t);
 501     int (*to_insert_fork_catchpoint) (struct target_ops *, int);
 502     int (*to_remove_fork_catchpoint) (struct target_ops *, int);
 503     int (*to_insert_vfork_catchpoint) (struct target_ops *, int);
 504     int (*to_remove_vfork_catchpoint) (struct target_ops *, int);
 505     int (*to_follow_fork) (struct target_ops *, int, int);
 506     int (*to_insert_exec_catchpoint) (struct target_ops *, int);
 507     int (*to_remove_exec_catchpoint) (struct target_ops *, int);
 508     int (*to_set_syscall_catchpoint) (struct target_ops *,
 509                                       int, int, int, int, int *);
 510     int (*to_has_exited) (struct target_ops *, int, int, int *);
 511     void (*to_mourn_inferior) (struct target_ops *);
 512     int (*to_can_run) (struct target_ops *);
 513
 514     /* Documentation of this routine is provided with the corresponding
 515        target_* macro.  */
 516     void (*to_pass_signals) (struct target_ops *, int, unsigned char *);
 517
 518     /* Documentation of this routine is provided with the
 519        corresponding target_* function.  */
 520     void (*to_program_signals) (struct target_ops *, int, unsigned char *);
 521
 522     int (*to_thread_alive) (struct target_ops *, ptid_t ptid);
 523     void (*to_find_new_threads) (struct target_ops *);
 524     char *(*to_pid_to_str) (struct target_ops *, ptid_t);
 525     char *(*to_extra_thread_info) (struct target_ops *, struct thread_info *);
 526     char *(*to_thread_name) (struct target_ops *, struct thread_info *);
 527     void (*to_stop) (struct target_ops *, ptid_t);
 528     void (*to_rcmd) (struct target_ops *,
 529                      char *command, struct ui_file *output);
 530     char *(*to_pid_to_exec_file) (struct target_ops *, int pid);
 531     void (*to_log_command) (struct target_ops *, const char *);
 532     struct target_section_table *(*to_get_section_table) (struct target_ops *);
 533     enum strata to_stratum;
 534     int (*to_has_all_memory) (struct target_ops *);
 535     int (*to_has_memory) (struct target_ops *);
 536     int (*to_has_stack) (struct target_ops *);
 537     int (*to_has_registers) (struct target_ops *);
 538     int (*to_has_execution) (struct target_ops *, ptid_t);
 539     int to_has_thread_control;  /* control thread execution */
 540     int to_attach_no_wait;
 541     /* ASYNC target controls */
 542     int (*to_can_async_p) (struct target_ops *)
 543       TARGET_DEFAULT_FUNC (find_default_can_async_p);
 544     int (*to_is_async_p) (struct target_ops *)
 545       TARGET_DEFAULT_FUNC (find_default_is_async_p);
 546     void (*to_async) (struct target_ops *, async_callback_ftype *, void *)
 547       TARGET_DEFAULT_NORETURN (tcomplain ());
 548     int (*to_supports_non_stop) (struct target_ops *);
 549     /* find_memory_regions support method for gcore */
 550     int (*to_find_memory_regions) (struct target_ops *,
 551                                    find_memory_region_ftype func, void *data);
 552     /* make_corefile_notes support method for gcore */
 553     char * (*to_make_corefile_notes) (struct target_ops *, bfd *, int *);
 554     /* get_bookmark support method for bookmarks */
 555     gdb_byte * (*to_get_bookmark) (struct target_ops *, char *, int);
 556     /* goto_bookmark support method for bookmarks */
 557     void (*to_goto_bookmark) (struct target_ops *, gdb_byte *, int);
 558     /* Return the thread-local address at OFFSET in the
 559        thread-local storage for the thread PTID and the shared library
 560        or executable file given by OBJFILE.  If that block of
 561        thread-local storage hasn't been allocated yet, this function
 562        may return an error.  */
 563     CORE_ADDR (*to_get_thread_local_address) (struct target_ops *ops,
 564                                               ptid_t ptid,
 565                                               CORE_ADDR load_module_addr,
 566                                               CORE_ADDR offset);
 567
 568     /* Request that OPS transfer up to LEN 8-bit bytes of the target's
 569        OBJECT.  The OFFSET, for a seekable object, specifies the
 570        starting point.  The ANNEX can be used to provide additional
 571        data-specific information to the target.
 572
 573        Return the transferred status, error or OK (an
 574        'enum target_xfer_status' value).  Save the number of bytes
 575        actually transferred in *XFERED_LEN if transfer is successful
 576        (TARGET_XFER_OK) or the number unavailable bytes if the requested
 577        data is unavailable (TARGET_XFER_E_UNAVAILABLE).  *XFERED_LEN
 578        smaller than LEN does not indicate the end of the object, only
 579        the end of the transfer; higher level code should continue
 580        transferring if desired.  This is handled in target.c.
 581
 582        The interface does not support a "retry" mechanism.  Instead it
 583        assumes that at least one byte will be transfered on each
 584        successful call.
 585
 586        NOTE: cagney/2003-10-17: The current interface can lead to
 587        fragmented transfers.  Lower target levels should not implement
 588        hacks, such as enlarging the transfer, in an attempt to
 589        compensate for this.  Instead, the target stack should be
 590        extended so that it implements supply/collect methods and a
 591        look-aside object cache.  With that available, the lowest
 592        target can safely and freely "push" data up the stack.
 593
 594        See target_read and target_write for more information.  One,
 595        and only one, of readbuf or writebuf must be non-NULL.  */
 596
 597     enum target_xfer_status (*to_xfer_partial) (struct target_ops *ops,
 598                                                 enum target_object object,
 599                                                 const char *annex,
 600                                                 gdb_byte *readbuf,
 601                                                 const gdb_byte *writebuf,
 602                                                 ULONGEST offset, ULONGEST len,
 603                                                 ULONGEST *xfered_len)
 604       TARGET_DEFAULT_RETURN (TARGET_XFER_E_IO);
 605
 606     /* Returns the memory map for the target.  A return value of NULL
 607        means that no memory map is available.  If a memory address
 608        does not fall within any returned regions, it's assumed to be
 609        RAM.  The returned memory regions should not overlap.
 610
 611        The order of regions does not matter; target_memory_map will
 612        sort regions by starting address.  For that reason, this
 613        function should not be called directly except via
 614        target_memory_map.
 615
 616        This method should not cache data; if the memory map could
 617        change unexpectedly, it should be invalidated, and higher
 618        layers will re-fetch it.  */
 619     VEC(mem_region_s) *(*to_memory_map) (struct target_ops *);
 620
 621     /* Erases the region of flash memory starting at ADDRESS, of
 622        length LENGTH.
 623
 624        Precondition: both ADDRESS and ADDRESS+LENGTH should be aligned
 625        on flash block boundaries, as reported by 'to_memory_map'.  */
 626     void (*to_flash_erase) (struct target_ops *,
 627                            ULONGEST address, LONGEST length);
 628
 629     /* Finishes a flash memory write sequence.  After this operation
 630        all flash memory should be available for writing and the result
 631        of reading from areas written by 'to_flash_write' should be
 632        equal to what was written.  */
 633     void (*to_flash_done) (struct target_ops *);
 634
 635     /* Describe the architecture-specific features of this target.
 636        Returns the description found, or NULL if no description
 637        was available.  */
 638     const struct target_desc *(*to_read_description) (struct target_ops *ops);
 639
 640     /* Build the PTID of the thread on which a given task is running,
 641        based on LWP and THREAD.  These values are extracted from the
 642        task Private_Data section of the Ada Task Control Block, and
 643        their interpretation depends on the target.  */
 644     ptid_t (*to_get_ada_task_ptid) (struct target_ops *,
 645                                     long lwp, long thread);
 646
 647     /* Read one auxv entry from *READPTR, not reading locations >= ENDPTR.
 648        Return 0 if *READPTR is already at the end of the buffer.
 649        Return -1 if there is insufficient buffer for a whole entry.
 650        Return 1 if an entry was read into *TYPEP and *VALP.  */
 651     int (*to_auxv_parse) (struct target_ops *ops, gdb_byte **readptr,
 652                          gdb_byte *endptr, CORE_ADDR *typep, CORE_ADDR *valp);
 653
 654     /* Search SEARCH_SPACE_LEN bytes beginning at START_ADDR for the
 655        sequence of bytes in PATTERN with length PATTERN_LEN.
 656
 657        The result is 1 if found, 0 if not found, and -1 if there was an error
 658        requiring halting of the search (e.g. memory read error).
 659        If the pattern is found the address is recorded in FOUND_ADDRP.  */
 660     int (*to_search_memory) (struct target_ops *ops,
 661                              CORE_ADDR start_addr, ULONGEST search_space_len,
 662                              const gdb_byte *pattern, ULONGEST pattern_len,
 663                              CORE_ADDR *found_addrp);
 664
 665     /* Can target execute in reverse?  */
 666     int (*to_can_execute_reverse) (struct target_ops *);
 667
 668     /* The direction the target is currently executing.  Must be
 669        implemented on targets that support reverse execution and async
 670        mode.  The default simply returns forward execution.  */
 671     enum exec_direction_kind (*to_execution_direction) (struct target_ops *);
 672
 673     /* Does this target support debugging multiple processes
 674        simultaneously?  */
 675     int (*to_supports_multi_process) (struct target_ops *);
 676
 677     /* Does this target support enabling and disabling tracepoints while a trace
 678        experiment is running?  */
 679     int (*to_supports_enable_disable_tracepoint) (struct target_ops *);
 680
 681     /* Does this target support disabling address space randomization?  */
 682     int (*to_supports_disable_randomization) (struct target_ops *);
 683
 684     /* Does this target support the tracenz bytecode for string collection?  */
 685     int (*to_supports_string_tracing) (struct target_ops *);
 686
 687     /* Does this target support evaluation of breakpoint conditions on its
 688        end?  */
 689     int (*to_supports_evaluation_of_breakpoint_conditions) (struct target_ops *);
 690
 691     /* Does this target support evaluation of breakpoint commands on its
 692        end?  */
 693     int (*to_can_run_breakpoint_commands) (struct target_ops *);
 694
 695     /* Determine current architecture of thread PTID.
 696
 697        The target is supposed to determine the architecture of the code where
 698        the target is currently stopped at (on Cell, if a target is in spu_run,
 699        to_thread_architecture would return SPU, otherwise PPC32 or PPC64).
 700        This is architecture used to perform decr_pc_after_break adjustment,
 701        and also determines the frame architecture of the innermost frame.
 702        ptrace operations need to operate according to target_gdbarch ().
 703
 704        The default implementation always returns target_gdbarch ().  */
 705     struct gdbarch *(*to_thread_architecture) (struct target_ops *, ptid_t);
 706
 707     /* Determine current address space of thread PTID.
 708
 709        The default implementation always returns the inferior's
 710        address space.  */
 711     struct address_space *(*to_thread_address_space) (struct target_ops *,
 712                                                       ptid_t);
 713
 714     /* Target file operations.  */
 715
 716     /* Open FILENAME on the target, using FLAGS and MODE.  Return a
 717        target file descriptor, or -1 if an error occurs (and set
 718        *TARGET_ERRNO).  */
 719     int (*to_fileio_open) (struct target_ops *,
 720                            const char *filename, int flags, int mode,
 721                            int *target_errno);
 722
 723     /* Write up to LEN bytes from WRITE_BUF to FD on the target.
 724        Return the number of bytes written, or -1 if an error occurs
 725        (and set *TARGET_ERRNO).  */
 726     int (*to_fileio_pwrite) (struct target_ops *,
 727                              int fd, const gdb_byte *write_buf, int len,
 728                              ULONGEST offset, int *target_errno);
 729
 730     /* Read up to LEN bytes FD on the target into READ_BUF.
 731        Return the number of bytes read, or -1 if an error occurs
 732        (and set *TARGET_ERRNO).  */
 733     int (*to_fileio_pread) (struct target_ops *,
 734                             int fd, gdb_byte *read_buf, int len,
 735                             ULONGEST offset, int *target_errno);
 736
 737     /* Close FD on the target.  Return 0, or -1 if an error occurs
 738        (and set *TARGET_ERRNO).  */
 739     int (*to_fileio_close) (int fd, int *target_errno);
 740
 741     /* Unlink FILENAME on the target.  Return 0, or -1 if an error
 742        occurs (and set *TARGET_ERRNO).  */
 743     int (*to_fileio_unlink) (const char *filename, int *target_errno);
 744
 745     /* Read value of symbolic link FILENAME on the target.  Return a
 746        null-terminated string allocated via xmalloc, or NULL if an error
 747        occurs (and set *TARGET_ERRNO).  */
 748     char *(*to_fileio_readlink) (const char *filename, int *target_errno);
 749
 750
 751     /* Implement the "info proc" command.  */
 752     void (*to_info_proc) (struct target_ops *, char *, enum info_proc_what);
 753
 754     /* Tracepoint-related operations.  */
 755
 756     /* Prepare the target for a tracing run.  */
 757     void (*to_trace_init) (void);
 758
 759     /* Send full details of a tracepoint location to the target.  */
 760     void (*to_download_tracepoint) (struct bp_location *location);
 761
 762     /* Is the target able to download tracepoint locations in current
 763        state?  */
 764     int (*to_can_download_tracepoint) (void);
 765
 766     /* Send full details of a trace state variable to the target.  */
 767     void (*to_download_trace_state_variable) (struct trace_state_variable *tsv);
 768
 769     /* Enable a tracepoint on the target.  */
 770     void (*to_enable_tracepoint) (struct bp_location *location);
 771
 772     /* Disable a tracepoint on the target.  */
 773     void (*to_disable_tracepoint) (struct bp_location *location);
 774
 775     /* Inform the target info of memory regions that are readonly
 776        (such as text sections), and so it should return data from
 777        those rather than look in the trace buffer.  */
 778     void (*to_trace_set_readonly_regions) (void);
 779
 780     /* Start a trace run.  */
 781     void (*to_trace_start) (void);
 782
 783     /* Get the current status of a tracing run.  */
 784     int (*to_get_trace_status) (struct trace_status *ts);
 785
 786     void (*to_get_tracepoint_status) (struct breakpoint *tp,
 787                                       struct uploaded_tp *utp);
 788
 789     /* Stop a trace run.  */
 790     void (*to_trace_stop) (void);
 791
 792    /* Ask the target to find a trace frame of the given type TYPE,
 793       using NUM, ADDR1, and ADDR2 as search parameters.  Returns the
 794       number of the trace frame, and also the tracepoint number at
 795       TPP.  If no trace frame matches, return -1.  May throw if the
 796       operation fails.  */
 797     int (*to_trace_find) (enum trace_find_type type, int num,
 798                           CORE_ADDR addr1, CORE_ADDR addr2, int *tpp);
 799
 800     /* Get the value of the trace state variable number TSV, returning
 801        1 if the value is known and writing the value itself into the
 802        location pointed to by VAL, else returning 0.  */
 803     int (*to_get_trace_state_variable_value) (int tsv, LONGEST *val);
 804
 805     int (*to_save_trace_data) (const char *filename);
 806
 807     int (*to_upload_tracepoints) (struct uploaded_tp **utpp);
 808
 809     int (*to_upload_trace_state_variables) (struct uploaded_tsv **utsvp);
 810
 811     LONGEST (*to_get_raw_trace_data) (gdb_byte *buf,
 812                                       ULONGEST offset, LONGEST len);
 813
 814     /* Get the minimum length of instruction on which a fast tracepoint
 815        may be set on the target.  If this operation is unsupported,
 816        return -1.  If for some reason the minimum length cannot be
 817        determined, return 0.  */
 818     int (*to_get_min_fast_tracepoint_insn_len) (void);
 819
 820     /* Set the target's tracing behavior in response to unexpected
 821        disconnection - set VAL to 1 to keep tracing, 0 to stop.  */
 822     void (*to_set_disconnected_tracing) (int val);
 823     void (*to_set_circular_trace_buffer) (int val);
 824     /* Set the size of trace buffer in the target.  */
 825     void (*to_set_trace_buffer_size) (LONGEST val);
 826
 827     /* Add/change textual notes about the trace run, returning 1 if
 828        successful, 0 otherwise.  */
 829     int (*to_set_trace_notes) (const char *user, const char *notes,
 830                                const char *stopnotes);
 831
 832     /* Return the processor core that thread PTID was last seen on.
 833        This information is updated only when:
 834        - update_thread_list is called
 835        - thread stops
 836        If the core cannot be determined -- either for the specified
 837        thread, or right now, or in this debug session, or for this
 838        target -- return -1.  */
 839     int (*to_core_of_thread) (struct target_ops *, ptid_t ptid);
 840
 841     /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range
 842        matches the contents of [DATA,DATA+SIZE).  Returns 1 if there's
 843        a match, 0 if there's a mismatch, and -1 if an error is
 844        encountered while reading memory.  */
 845     int (*to_verify_memory) (struct target_ops *, const gdb_byte *data,
 846                              CORE_ADDR memaddr, ULONGEST size);
 847
 848     /* Return the address of the start of the Thread Information Block
 849        a Windows OS specific feature.  */
 850     int (*to_get_tib_address) (ptid_t ptid, CORE_ADDR *addr);
 851
 852     /* Send the new settings of write permission variables.  */
 853     void (*to_set_permissions) (void);
 854
 855     /* Look for a static tracepoint marker at ADDR, and fill in MARKER
 856        with its details.  Return 1 on success, 0 on failure.  */
 857     int (*to_static_tracepoint_marker_at) (CORE_ADDR,
 858                                            struct static_tracepoint_marker *marker);
 859
 860     /* Return a vector of all tracepoints markers string id ID, or all
 861        markers if ID is NULL.  */
 862     VEC(static_tracepoint_marker_p) *(*to_static_tracepoint_markers_by_strid)
 863       (const char *id);
 864
 865     /* Return a traceframe info object describing the current
 866        traceframe's contents.  If the target doesn't support
 867        traceframe info, return NULL.  If the current traceframe is not
 868        selected (the current traceframe number is -1), the target can
 869        choose to return either NULL or an empty traceframe info.  If
 870        NULL is returned, for example in remote target, GDB will read
 871        from the live inferior.  If an empty traceframe info is
 872        returned, for example in tfile target, which means the
 873        traceframe info is available, but the requested memory is not
 874        available in it.  GDB will try to see if the requested memory
 875        is available in the read-only sections.  This method should not
 876        cache data; higher layers take care of caching, invalidating,
 877        and re-fetching when necessary.  */
 878     struct traceframe_info *(*to_traceframe_info) (void);
 879
 880     /* Ask the target to use or not to use agent according to USE.  Return 1
 881        successful, 0 otherwise.  */
 882     int (*to_use_agent) (int use);
 883
 884     /* Is the target able to use agent in current state?  */
 885     int (*to_can_use_agent) (void);
 886
 887     /* Check whether the target supports branch tracing.  */
 888     int (*to_supports_btrace) (struct target_ops *)
 889       TARGET_DEFAULT_RETURN (0);
 890
 891     /* Enable branch tracing for PTID and allocate a branch trace target
 892        information struct for reading and for disabling branch trace.  */
 893     struct btrace_target_info *(*to_enable_btrace) (ptid_t ptid);
 894
 895     /* Disable branch tracing and deallocate TINFO.  */
 896     void (*to_disable_btrace) (struct btrace_target_info *tinfo);
 897
 898     /* Disable branch tracing and deallocate TINFO.  This function is similar
 899        to to_disable_btrace, except that it is called during teardown and is
 900        only allowed to perform actions that are safe.  A counter-example would
 901        be attempting to talk to a remote target.  */
 902     void (*to_teardown_btrace) (struct btrace_target_info *tinfo);
 903
 904     /* Read branch trace data for the thread indicated by BTINFO into DATA.
 905        DATA is cleared before new trace is added.
 906        The branch trace will start with the most recent block and continue
 907        towards older blocks.  */
 908     enum btrace_error (*to_read_btrace) (VEC (btrace_block_s) **data,
 909                                          struct btrace_target_info *btinfo,
 910                                          enum btrace_read_type type);
 911
 912     /* Stop trace recording.  */
 913     void (*to_stop_recording) (void);
 914
 915     /* Print information about the recording.  */
 916     void (*to_info_record) (void);
 917
 918     /* Save the recorded execution trace into a file.  */
 919     void (*to_save_record) (const char *filename);
 920
 921     /* Delete the recorded execution trace from the current position onwards.  */
 922     void (*to_delete_record) (void);
 923
 924     /* Query if the record target is currently replaying.  */
 925     int (*to_record_is_replaying) (void);
 926
 927     /* Go to the begin of the execution trace.  */
 928     void (*to_goto_record_begin) (void);
 929
 930     /* Go to the end of the execution trace.  */
 931     void (*to_goto_record_end) (void);
 932
 933     /* Go to a specific location in the recorded execution trace.  */
 934     void (*to_goto_record) (ULONGEST insn);
 935
 936     /* Disassemble SIZE instructions in the recorded execution trace from
 937        the current position.
 938        If SIZE < 0, disassemble abs (SIZE) preceding instructions; otherwise,
 939        disassemble SIZE succeeding instructions.  */
 940     void (*to_insn_history) (int size, int flags);
 941
 942     /* Disassemble SIZE instructions in the recorded execution trace around
 943        FROM.
 944        If SIZE < 0, disassemble abs (SIZE) instructions before FROM; otherwise,
 945        disassemble SIZE instructions after FROM.  */
 946     void (*to_insn_history_from) (ULONGEST from, int size, int flags);
 947
 948     /* Disassemble a section of the recorded execution trace from instruction
 949        BEGIN (inclusive) to instruction END (inclusive).  */
 950     void (*to_insn_history_range) (ULONGEST begin, ULONGEST end, int flags);
 951
 952     /* Print a function trace of the recorded execution trace.
 953        If SIZE < 0, print abs (SIZE) preceding functions; otherwise, print SIZE
 954        succeeding functions.  */
 955     void (*to_call_history) (int size, int flags);
 956
 957     /* Print a function trace of the recorded execution trace starting
 958        at function FROM.
 959        If SIZE < 0, print abs (SIZE) functions before FROM; otherwise, print
 960        SIZE functions after FROM.  */
 961     void (*to_call_history_from) (ULONGEST begin, int size, int flags);
 962
 963     /* Print a function trace of an execution trace section from function BEGIN
 964        (inclusive) to function END (inclusive).  */
 965     void (*to_call_history_range) (ULONGEST begin, ULONGEST end, int flags);
 966
 967     /* Nonzero if TARGET_OBJECT_LIBRARIES_SVR4 may be read with a
 968        non-empty annex.  */
 969     int (*to_augmented_libraries_svr4_read) (void);
 970
 971     /* Those unwinders are tried before any other arch unwinders.  Use NULL if
 972        it is not used.  */
 973     const struct frame_unwind *to_get_unwinder;
 974     const struct frame_unwind *to_get_tailcall_unwinder;
 975
 976     /* Return the number of bytes by which the PC needs to be decremented
 977        after executing a breakpoint instruction.
 978        Defaults to gdbarch_decr_pc_after_break (GDBARCH).  */
 979     CORE_ADDR (*to_decr_pc_after_break) (struct target_ops *ops,
 980                                          struct gdbarch *gdbarch);
 981
 982     int to_magic;
 983     /* Need sub-structure for target machine related rather than comm related?
 984      */
 985   };
 986
 987 /* Magic number for checking ops size.  If a struct doesn't end with this
 988    number, somebody changed the declaration but didn't change all the
 989    places that initialize one.  */
 990
 991 #define OPS_MAGIC       3840
 992
 993 /* The ops structure for our "current" target process.  This should
 994    never be NULL.  If there is no target, it points to the dummy_target.  */
 995
 996 extern struct target_ops current_target;
 997
 998 /* Define easy words for doing these operations on our current target.  */
 999
1000 #define target_shortname        (current_target.to_shortname)
1001 #define target_longname         (current_target.to_longname)
1002
1003 /* Does whatever cleanup is required for a target that we are no
1004    longer going to be calling.  This routine is automatically always
1005    called after popping the target off the target stack - the target's
1006    own methods are no longer available through the target vector.
1007    Closing file descriptors and freeing all memory allocated memory are
1008    typical things it should do.  */
1009
1010 void target_close (struct target_ops *targ);
1011
1012 /* Attaches to a process on the target side.  Arguments are as passed
1013    to the `attach' command by the user.  This routine can be called
1014    when the target is not on the target-stack, if the target_can_run
1015    routine returns 1; in that case, it must push itself onto the stack.
1016    Upon exit, the target should be ready for normal operations, and
1017    should be ready to deliver the status of the process immediately
1018    (without waiting) to an upcoming target_wait call.  */
1019
1020 void target_attach (char *, int);
1021
1022 /* Some targets don't generate traps when attaching to the inferior,
1023    or their target_attach implementation takes care of the waiting.
1024    These targets must set to_attach_no_wait.  */
1025
1026 #define target_attach_no_wait \
1027      (current_target.to_attach_no_wait)
1028
1029 /* The target_attach operation places a process under debugger control,
1030    and stops the process.
1031
1032    This operation provides a target-specific hook that allows the
1033    necessary bookkeeping to be performed after an attach completes.  */
1034 #define target_post_attach(pid) \
1035      (*current_target.to_post_attach) (&current_target, pid)
1036
1037 /* Takes a program previously attached to and detaches it.
1038    The program may resume execution (some targets do, some don't) and will
1039    no longer stop on signals, etc.  We better not have left any breakpoints
1040    in the program or it'll die when it hits one.  ARGS is arguments
1041    typed by the user (e.g. a signal to send the process).  FROM_TTY
1042    says whether to be verbose or not.  */
1043
1044 extern void target_detach (const char *, int);
1045
1046 /* Disconnect from the current target without resuming it (leaving it
1047    waiting for a debugger).  */
1048
1049 extern void target_disconnect (char *, int);
1050
1051 /* Resume execution of the target process PTID (or a group of
1052    threads).  STEP says whether to single-step or to run free; SIGGNAL
1053    is the signal to be given to the target, or GDB_SIGNAL_0 for no
1054    signal.  The caller may not pass GDB_SIGNAL_DEFAULT.  A specific
1055    PTID means `step/resume only this process id'.  A wildcard PTID
1056    (all threads, or all threads of process) means `step/resume
1057    INFERIOR_PTID, and let other threads (for which the wildcard PTID
1058    matches) resume with their 'thread->suspend.stop_signal' signal
1059    (usually GDB_SIGNAL_0) if it is in "pass" state, or with no signal
1060    if in "no pass" state.  */
1061
1062 extern void target_resume (ptid_t ptid, int step, enum gdb_signal signal);
1063
1064 /* Wait for process pid to do something.  PTID = -1 to wait for any
1065    pid to do something.  Return pid of child, or -1 in case of error;
1066    store status through argument pointer STATUS.  Note that it is
1067    _NOT_ OK to throw_exception() out of target_wait() without popping
1068    the debugging target from the stack; GDB isn't prepared to get back
1069    to the prompt with a debugging target but without the frame cache,
1070    stop_pc, etc., set up.  OPTIONS is a bitwise OR of TARGET_W*
1071    options.  */
1072
1073 extern ptid_t target_wait (ptid_t ptid, struct target_waitstatus *status,
1074                            int options);
1075
1076 /* Fetch at least register REGNO, or all regs if regno == -1.  No result.  */
1077
1078 extern void target_fetch_registers (struct regcache *regcache, int regno);
1079
1080 /* Store at least register REGNO, or all regs if REGNO == -1.
1081    It can store as many registers as it wants to, so target_prepare_to_store
1082    must have been previously called.  Calls error() if there are problems.  */
1083
1084 extern void target_store_registers (struct regcache *regcache, int regs);
1085
1086 /* Get ready to modify the registers array.  On machines which store
1087    individual registers, this doesn't need to do anything.  On machines
1088    which store all the registers in one fell swoop, this makes sure
1089    that REGISTERS contains all the registers from the program being
1090    debugged.  */
1091
1092 #define target_prepare_to_store(regcache)       \
1093      (*current_target.to_prepare_to_store) (&current_target, regcache)
1094
1095 /* Determine current address space of thread PTID.  */
1096
1097 struct address_space *target_thread_address_space (ptid_t);
1098
1099 /* Implement the "info proc" command.  This returns one if the request
1100    was handled, and zero otherwise.  It can also throw an exception if
1101    an error was encountered while attempting to handle the
1102    request.  */
1103
1104 int target_info_proc (char *, enum info_proc_what);
1105
1106 /* Returns true if this target can debug multiple processes
1107    simultaneously.  */
1108
1109 #define target_supports_multi_process() \
1110      (*current_target.to_supports_multi_process) (&current_target)
1111
1112 /* Returns true if this target can disable address space randomization.  */
1113
1114 int target_supports_disable_randomization (void);
1115
1116 /* Returns true if this target can enable and disable tracepoints
1117    while a trace experiment is running.  */
1118
1119 #define target_supports_enable_disable_tracepoint() \
1120   (*current_target.to_supports_enable_disable_tracepoint) (&current_target)
1121
1122 #define target_supports_string_tracing() \
1123   (*current_target.to_supports_string_tracing) (&current_target)
1124
1125 /* Returns true if this target can handle breakpoint conditions
1126    on its end.  */
1127
1128 #define target_supports_evaluation_of_breakpoint_conditions() \
1129   (*current_target.to_supports_evaluation_of_breakpoint_conditions) (&current_target)
1130
1131 /* Returns true if this target can handle breakpoint commands
1132    on its end.  */
1133
1134 #define target_can_run_breakpoint_commands() \
1135   (*current_target.to_can_run_breakpoint_commands) (&current_target)
1136
1137 extern int target_read_string (CORE_ADDR, char **, int, int *);
1138
1139 extern int target_read_memory (CORE_ADDR memaddr, gdb_byte *myaddr,
1140                                ssize_t len);
1141
1142 extern int target_read_raw_memory (CORE_ADDR memaddr, gdb_byte *myaddr,
1143                                    ssize_t len);
1144
1145 extern int target_read_stack (CORE_ADDR memaddr, gdb_byte *myaddr, ssize_t len);
1146
1147 extern int target_read_code (CORE_ADDR memaddr, gdb_byte *myaddr, ssize_t len);
1148
1149 extern int target_write_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
1150                                 ssize_t len);
1151
1152 extern int target_write_raw_memory (CORE_ADDR memaddr, const gdb_byte *myaddr,
1153                                     ssize_t len);
1154
1155 /* Fetches the target's memory map.  If one is found it is sorted
1156    and returned, after some consistency checking.  Otherwise, NULL
1157    is returned.  */
1158 VEC(mem_region_s) *target_memory_map (void);
1159
1160 /* Erase the specified flash region.  */
1161 void target_flash_erase (ULONGEST address, LONGEST length);
1162
1163 /* Finish a sequence of flash operations.  */
1164 void target_flash_done (void);
1165
1166 /* Describes a request for a memory write operation.  */
1167 struct memory_write_request
1168   {
1169     /* Begining address that must be written.  */
1170     ULONGEST begin;
1171     /* Past-the-end address.  */
1172     ULONGEST end;
1173     /* The data to write.  */
1174     gdb_byte *data;
1175     /* A callback baton for progress reporting for this request.  */
1176     void *baton;
1177   };
1178 typedef struct memory_write_request memory_write_request_s;
1179 DEF_VEC_O(memory_write_request_s);
1180
1181 /* Enumeration specifying different flash preservation behaviour.  */
1182 enum flash_preserve_mode
1183   {
1184     flash_preserve,
1185     flash_discard
1186   };
1187
1188 /* Write several memory blocks at once.  This version can be more
1189    efficient than making several calls to target_write_memory, in
1190    particular because it can optimize accesses to flash memory.
1191
1192    Moreover, this is currently the only memory access function in gdb
1193    that supports writing to flash memory, and it should be used for
1194    all cases where access to flash memory is desirable.
1195
1196    REQUESTS is the vector (see vec.h) of memory_write_request.
1197    PRESERVE_FLASH_P indicates what to do with blocks which must be
1198      erased, but not completely rewritten.
1199    PROGRESS_CB is a function that will be periodically called to provide
1200      feedback to user.  It will be called with the baton corresponding
1201      to the request currently being written.  It may also be called
1202      with a NULL baton, when preserved flash sectors are being rewritten.
1203
1204    The function returns 0 on success, and error otherwise.  */
1205 int target_write_memory_blocks (VEC(memory_write_request_s) *requests,
1206                                 enum flash_preserve_mode preserve_flash_p,
1207                                 void (*progress_cb) (ULONGEST, void *));
1208
1209 /* Print a line about the current target.  */
1210
1211 #define target_files_info()     \
1212      (*current_target.to_files_info) (&current_target)
1213
1214 /* Insert a hardware breakpoint at address BP_TGT->placed_address in
1215    the target machine.  Returns 0 for success, and returns non-zero or
1216    throws an error (with a detailed failure reason error code and
1217    message) otherwise.  */
1218
1219 extern int target_insert_breakpoint (struct gdbarch *gdbarch,
1220                                      struct bp_target_info *bp_tgt);
1221
1222 /* Remove a breakpoint at address BP_TGT->placed_address in the target
1223    machine.  Result is 0 for success, non-zero for error.  */
1224
1225 extern int target_remove_breakpoint (struct gdbarch *gdbarch,
1226                                      struct bp_target_info *bp_tgt);
1227
1228 /* Initialize the terminal settings we record for the inferior,
1229    before we actually run the inferior.  */
1230
1231 #define target_terminal_init() \
1232      (*current_target.to_terminal_init) (&current_target)
1233
1234 /* Put the inferior's terminal settings into effect.
1235    This is preparation for starting or resuming the inferior.  */
1236
1237 extern void target_terminal_inferior (void);
1238
1239 /* Put some of our terminal settings into effect,
1240    enough to get proper results from our output,
1241    but do not change into or out of RAW mode
1242    so that no input is discarded.
1243
1244    After doing this, either terminal_ours or terminal_inferior
1245    should be called to get back to a normal state of affairs.  */
1246
1247 #define target_terminal_ours_for_output() \
1248      (*current_target.to_terminal_ours_for_output) (&current_target)
1249
1250 /* Put our terminal settings into effect.
1251    First record the inferior's terminal settings
1252    so they can be restored properly later.  */
1253
1254 #define target_terminal_ours() \
1255      (*current_target.to_terminal_ours) (&current_target)
1256
1257 /* Save our terminal settings.
1258    This is called from TUI after entering or leaving the curses
1259    mode.  Since curses modifies our terminal this call is here
1260    to take this change into account.  */
1261
1262 #define target_terminal_save_ours() \
1263      (*current_target.to_terminal_save_ours) (&current_target)
1264
1265 /* Print useful information about our terminal status, if such a thing
1266    exists.  */
1267
1268 #define target_terminal_info(arg, from_tty) \
1269      (*current_target.to_terminal_info) (&current_target, arg, from_tty)
1270
1271 /* Kill the inferior process.   Make it go away.  */
1272
1273 extern void target_kill (void);
1274
1275 /* Load an executable file into the target process.  This is expected
1276    to not only bring new code into the target process, but also to
1277    update GDB's symbol tables to match.
1278
1279    ARG contains command-line arguments, to be broken down with
1280    buildargv ().  The first non-switch argument is the filename to
1281    load, FILE; the second is a number (as parsed by strtoul (..., ...,
1282    0)), which is an offset to apply to the load addresses of FILE's
1283    sections.  The target may define switches, or other non-switch
1284    arguments, as it pleases.  */
1285
1286 extern void target_load (char *arg, int from_tty);
1287
1288 /* Start an inferior process and set inferior_ptid to its pid.
1289    EXEC_FILE is the file to run.
1290    ALLARGS is a string containing the arguments to the program.
1291    ENV is the environment vector to pass.  Errors reported with error().
1292    On VxWorks and various standalone systems, we ignore exec_file.  */
1293
1294 void target_create_inferior (char *exec_file, char *args,
1295                              char **env, int from_tty);
1296
1297 /* Some targets (such as ttrace-based HPUX) don't allow us to request
1298    notification of inferior events such as fork and vork immediately
1299    after the inferior is created.  (This because of how gdb gets an
1300    inferior created via invoking a shell to do it.  In such a scenario,
1301    if the shell init file has commands in it, the shell will fork and
1302    exec for each of those commands, and we will see each such fork
1303    event.  Very bad.)
1304
1305    Such targets will supply an appropriate definition for this function.  */
1306
1307 #define target_post_startup_inferior(ptid) \
1308      (*current_target.to_post_startup_inferior) (&current_target, ptid)
1309
1310 /* On some targets, we can catch an inferior fork or vfork event when
1311    it occurs.  These functions insert/remove an already-created
1312    catchpoint for such events.  They return  0 for success, 1 if the
1313    catchpoint type is not supported and -1 for failure.  */
1314
1315 #define target_insert_fork_catchpoint(pid) \
1316      (*current_target.to_insert_fork_catchpoint) (&current_target, pid)
1317
1318 #define target_remove_fork_catchpoint(pid) \
1319      (*current_target.to_remove_fork_catchpoint) (&current_target, pid)
1320
1321 #define target_insert_vfork_catchpoint(pid) \
1322      (*current_target.to_insert_vfork_catchpoint) (&current_target, pid)
1323
1324 #define target_remove_vfork_catchpoint(pid) \
1325      (*current_target.to_remove_vfork_catchpoint) (&current_target, pid)
1326
1327 /* If the inferior forks or vforks, this function will be called at
1328    the next resume in order to perform any bookkeeping and fiddling
1329    necessary to continue debugging either the parent or child, as
1330    requested, and releasing the other.  Information about the fork
1331    or vfork event is available via get_last_target_status ().
1332    This function returns 1 if the inferior should not be resumed
1333    (i.e. there is another event pending).  */
1334
1335 int target_follow_fork (int follow_child, int detach_fork);
1336
1337 /* On some targets, we can catch an inferior exec event when it
1338    occurs.  These functions insert/remove an already-created
1339    catchpoint for such events.  They return  0 for success, 1 if the
1340    catchpoint type is not supported and -1 for failure.  */
1341
1342 #define target_insert_exec_catchpoint(pid) \
1343      (*current_target.to_insert_exec_catchpoint) (&current_target, pid)
1344
1345 #define target_remove_exec_catchpoint(pid) \
1346      (*current_target.to_remove_exec_catchpoint) (&current_target, pid)
1347
1348 /* Syscall catch.
1349
1350    NEEDED is nonzero if any syscall catch (of any kind) is requested.
1351    If NEEDED is zero, it means the target can disable the mechanism to
1352    catch system calls because there are no more catchpoints of this type.
1353
1354    ANY_COUNT is nonzero if a generic (filter-less) syscall catch is
1355    being requested.  In this case, both TABLE_SIZE and TABLE should
1356    be ignored.
1357
1358    TABLE_SIZE is the number of elements in TABLE.  It only matters if
1359    ANY_COUNT is zero.
1360
1361    TABLE is an array of ints, indexed by syscall number.  An element in
1362    this array is nonzero if that syscall should be caught.  This argument
1363    only matters if ANY_COUNT is zero.
1364
1365    Return 0 for success, 1 if syscall catchpoints are not supported or -1
1366    for failure.  */
1367
1368 #define target_set_syscall_catchpoint(pid, needed, any_count, table_size, table) \
1369      (*current_target.to_set_syscall_catchpoint) (&current_target,      \
1370                                                   pid, needed, any_count, \
1371                                                   table_size, table)
1372
1373 /* Returns TRUE if PID has exited.  And, also sets EXIT_STATUS to the
1374    exit code of PID, if any.  */
1375
1376 #define target_has_exited(pid,wait_status,exit_status) \
1377      (*current_target.to_has_exited) (&current_target, \
1378                                       pid,wait_status,exit_status)
1379
1380 /* The debugger has completed a blocking wait() call.  There is now
1381    some process event that must be processed.  This function should
1382    be defined by those targets that require the debugger to perform
1383    cleanup or internal state changes in response to the process event.  */
1384
1385 /* The inferior process has died.  Do what is right.  */
1386
1387 void target_mourn_inferior (void);
1388
1389 /* Does target have enough data to do a run or attach command? */
1390
1391 #define target_can_run(t) \
1392      ((t)->to_can_run) (t)
1393
1394 /* Set list of signals to be handled in the target.
1395
1396    PASS_SIGNALS is an array of size NSIG, indexed by target signal number
1397    (enum gdb_signal).  For every signal whose entry in this array is
1398    non-zero, the target is allowed -but not required- to skip reporting
1399    arrival of the signal to the GDB core by returning from target_wait,
1400    and to pass the signal directly to the inferior instead.
1401
1402    However, if the target is hardware single-stepping a thread that is
1403    about to receive a signal, it needs to be reported in any case, even
1404    if mentioned in a previous target_pass_signals call.   */
1405
1406 extern void target_pass_signals (int nsig, unsigned char *pass_signals);
1407
1408 /* Set list of signals the target may pass to the inferior.  This
1409    directly maps to the "handle SIGNAL pass/nopass" setting.
1410
1411    PROGRAM_SIGNALS is an array of size NSIG, indexed by target signal
1412    number (enum gdb_signal).  For every signal whose entry in this
1413    array is non-zero, the target is allowed to pass the signal to the
1414    inferior.  Signals not present in the array shall be silently
1415    discarded.  This does not influence whether to pass signals to the
1416    inferior as a result of a target_resume call.  This is useful in
1417    scenarios where the target needs to decide whether to pass or not a
1418    signal to the inferior without GDB core involvement, such as for
1419    example, when detaching (as threads may have been suspended with
1420    pending signals not reported to GDB).  */
1421
1422 extern void target_program_signals (int nsig, unsigned char *program_signals);
1423
1424 /* Check to see if a thread is still alive.  */
1425
1426 extern int target_thread_alive (ptid_t ptid);
1427
1428 /* Query for new threads and add them to the thread list.  */
1429
1430 extern void target_find_new_threads (void);
1431
1432 /* Make target stop in a continuable fashion.  (For instance, under
1433    Unix, this should act like SIGSTOP).  This function is normally
1434    used by GUIs to implement a stop button.  */
1435
1436 extern void target_stop (ptid_t ptid);
1437
1438 /* Send the specified COMMAND to the target's monitor
1439    (shell,interpreter) for execution.  The result of the query is
1440    placed in OUTBUF.  */
1441
1442 #define target_rcmd(command, outbuf) \
1443      (*current_target.to_rcmd) (&current_target, command, outbuf)
1444
1445
1446 /* Does the target include all of memory, or only part of it?  This
1447    determines whether we look up the target chain for other parts of
1448    memory if this target can't satisfy a request.  */
1449
1450 extern int target_has_all_memory_1 (void);
1451 #define target_has_all_memory target_has_all_memory_1 ()
1452
1453 /* Does the target include memory?  (Dummy targets don't.)  */
1454
1455 extern int target_has_memory_1 (void);
1456 #define target_has_memory target_has_memory_1 ()
1457
1458 /* Does the target have a stack?  (Exec files don't, VxWorks doesn't, until
1459    we start a process.)  */
1460
1461 extern int target_has_stack_1 (void);
1462 #define target_has_stack target_has_stack_1 ()
1463
1464 /* Does the target have registers?  (Exec files don't.)  */
1465
1466 extern int target_has_registers_1 (void);
1467 #define target_has_registers target_has_registers_1 ()
1468
1469 /* Does the target have execution?  Can we make it jump (through
1470    hoops), or pop its stack a few times?  This means that the current
1471    target is currently executing; for some targets, that's the same as
1472    whether or not the target is capable of execution, but there are
1473    also targets which can be current while not executing.  In that
1474    case this will become true after target_create_inferior or
1475    target_attach.  */
1476
1477 extern int target_has_execution_1 (ptid_t);
1478
1479 /* Like target_has_execution_1, but always passes inferior_ptid.  */
1480
1481 extern int target_has_execution_current (void);
1482
1483 #define target_has_execution target_has_execution_current ()
1484
1485 /* Default implementations for process_stratum targets.  Return true
1486    if there's a selected inferior, false otherwise.  */
1487
1488 extern int default_child_has_all_memory (struct target_ops *ops);
1489 extern int default_child_has_memory (struct target_ops *ops);
1490 extern int default_child_has_stack (struct target_ops *ops);
1491 extern int default_child_has_registers (struct target_ops *ops);
1492 extern int default_child_has_execution (struct target_ops *ops,
1493                                         ptid_t the_ptid);
1494
1495 /* Can the target support the debugger control of thread execution?
1496    Can it lock the thread scheduler?  */
1497
1498 #define target_can_lock_scheduler \
1499      (current_target.to_has_thread_control & tc_schedlock)
1500
1501 /* Should the target enable async mode if it is supported?  Temporary
1502    cludge until async mode is a strict superset of sync mode.  */
1503 extern int target_async_permitted;
1504
1505 /* Can the target support asynchronous execution?  */
1506 #define target_can_async_p() (current_target.to_can_async_p (&current_target))
1507
1508 /* Is the target in asynchronous execution mode?  */
1509 #define target_is_async_p() (current_target.to_is_async_p (&current_target))
1510
1511 int target_supports_non_stop (void);
1512
1513 /* Put the target in async mode with the specified callback function.  */
1514 #define target_async(CALLBACK,CONTEXT) \
1515      (current_target.to_async (&current_target, (CALLBACK), (CONTEXT)))
1516
1517 #define target_execution_direction() \
1518   (current_target.to_execution_direction (&current_target))
1519
1520 /* Converts a process id to a string.  Usually, the string just contains
1521    `process xyz', but on some systems it may contain
1522    `process xyz thread abc'.  */
1523
1524 extern char *target_pid_to_str (ptid_t ptid);
1525
1526 extern char *normal_pid_to_str (ptid_t ptid);
1527
1528 /* Return a short string describing extra information about PID,
1529    e.g. "sleeping", "runnable", "running on LWP 3".  Null return value
1530    is okay.  */
1531
1532 #define target_extra_thread_info(TP) \
1533      (current_target.to_extra_thread_info (&current_target, TP))
1534
1535 /* Return the thread's name.  A NULL result means that the target
1536    could not determine this thread's name.  */
1537
1538 extern char *target_thread_name (struct thread_info *);
1539
1540 /* Attempts to find the pathname of the executable file
1541    that was run to create a specified process.
1542
1543    The process PID must be stopped when this operation is used.
1544
1545    If the executable file cannot be determined, NULL is returned.
1546
1547    Else, a pointer to a character string containing the pathname
1548    is returned.  This string should be copied into a buffer by
1549    the client if the string will not be immediately used, or if
1550    it must persist.  */
1551
1552 #define target_pid_to_exec_file(pid) \
1553      (current_target.to_pid_to_exec_file) (&current_target, pid)
1554
1555 /* See the to_thread_architecture description in struct target_ops.  */
1556
1557 #define target_thread_architecture(ptid) \
1558      (current_target.to_thread_architecture (&current_target, ptid))
1559
1560 /*
1561  * Iterator function for target memory regions.
1562  * Calls a callback function once for each memory region 'mapped'
1563  * in the child process.  Defined as a simple macro rather than
1564  * as a function macro so that it can be tested for nullity.
1565  */
1566
1567 #define target_find_memory_regions(FUNC, DATA) \
1568      (current_target.to_find_memory_regions) (&current_target, FUNC, DATA)
1569
1570 /*
1571  * Compose corefile .note section.
1572  */
1573
1574 #define target_make_corefile_notes(BFD, SIZE_P) \
1575      (current_target.to_make_corefile_notes) (&current_target, BFD, SIZE_P)
1576
1577 /* Bookmark interfaces.  */
1578 #define target_get_bookmark(ARGS, FROM_TTY) \
1579      (current_target.to_get_bookmark) (&current_target, ARGS, FROM_TTY)
1580
1581 #define target_goto_bookmark(ARG, FROM_TTY) \
1582      (current_target.to_goto_bookmark) (&current_target, ARG, FROM_TTY)
1583
1584 /* Hardware watchpoint interfaces.  */
1585
1586 /* Returns non-zero if we were stopped by a hardware watchpoint (memory read or
1587    write).  Only the INFERIOR_PTID task is being queried.  */
1588
1589 #define target_stopped_by_watchpoint()          \
1590   ((*current_target.to_stopped_by_watchpoint) (&current_target))
1591
1592 /* Non-zero if we have steppable watchpoints  */
1593
1594 #define target_have_steppable_watchpoint \
1595    (current_target.to_have_steppable_watchpoint)
1596
1597 /* Non-zero if we have continuable watchpoints  */
1598
1599 #define target_have_continuable_watchpoint \
1600    (current_target.to_have_continuable_watchpoint)
1601
1602 /* Provide defaults for hardware watchpoint functions.  */
1603
1604 /* If the *_hw_beakpoint functions have not been defined
1605    elsewhere use the definitions in the target vector.  */
1606
1607 /* Returns non-zero if we can set a hardware watchpoint of type TYPE.  TYPE is
1608    one of bp_hardware_watchpoint, bp_read_watchpoint, bp_write_watchpoint, or
1609    bp_hardware_breakpoint.  CNT is the number of such watchpoints used so far
1610    (including this one?).  OTHERTYPE is who knows what...  */
1611
1612 #define target_can_use_hardware_watchpoint(TYPE,CNT,OTHERTYPE) \
1613  (*current_target.to_can_use_hw_breakpoint) (&current_target,  \
1614                                              TYPE, CNT, OTHERTYPE);
1615
1616 /* Returns the number of debug registers needed to watch the given
1617    memory region, or zero if not supported.  */
1618
1619 #define target_region_ok_for_hw_watchpoint(addr, len) \
1620     (*current_target.to_region_ok_for_hw_watchpoint) (&current_target,  \
1621                                                       addr, len)
1622
1623
1624 /* Set/clear a hardware watchpoint starting at ADDR, for LEN bytes.
1625    TYPE is 0 for write, 1 for read, and 2 for read/write accesses.
1626    COND is the expression for its condition, or NULL if there's none.
1627    Returns 0 for success, 1 if the watchpoint type is not supported,
1628    -1 for failure.  */
1629
1630 #define target_insert_watchpoint(addr, len, type, cond) \
1631      (*current_target.to_insert_watchpoint) (&current_target,   \
1632                                              addr, len, type, cond)
1633
1634 #define target_remove_watchpoint(addr, len, type, cond) \
1635      (*current_target.to_remove_watchpoint) (&current_target,   \
1636                                              addr, len, type, cond)
1637
1638 /* Insert a new masked watchpoint at ADDR using the mask MASK.
1639    RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1640    or hw_access for an access watchpoint.  Returns 0 for success, 1 if
1641    masked watchpoints are not supported, -1 for failure.  */
1642
1643 extern int target_insert_mask_watchpoint (CORE_ADDR, CORE_ADDR, int);
1644
1645 /* Remove a masked watchpoint at ADDR with the mask MASK.
1646    RW may be hw_read for a read watchpoint, hw_write for a write watchpoint
1647    or hw_access for an access watchpoint.  Returns 0 for success, non-zero
1648    for failure.  */
1649
1650 extern int target_remove_mask_watchpoint (CORE_ADDR, CORE_ADDR, int);
1651
1652 /* Insert a hardware breakpoint at address BP_TGT->placed_address in
1653    the target machine.  Returns 0 for success, and returns non-zero or
1654    throws an error (with a detailed failure reason error code and
1655    message) otherwise.  */
1656
1657 #define target_insert_hw_breakpoint(gdbarch, bp_tgt) \
1658      (*current_target.to_insert_hw_breakpoint) (&current_target,        \
1659                                                 gdbarch, bp_tgt)
1660
1661 #define target_remove_hw_breakpoint(gdbarch, bp_tgt) \
1662      (*current_target.to_remove_hw_breakpoint) (&current_target,        \
1663                                                 gdbarch, bp_tgt)
1664
1665 /* Return number of debug registers needed for a ranged breakpoint,
1666    or -1 if ranged breakpoints are not supported.  */
1667
1668 extern int target_ranged_break_num_registers (void);
1669
1670 /* Return non-zero if target knows the data address which triggered this
1671    target_stopped_by_watchpoint, in such case place it to *ADDR_P.  Only the
1672    INFERIOR_PTID task is being queried.  */
1673 #define target_stopped_data_address(target, addr_p) \
1674     (*target.to_stopped_data_address) (target, addr_p)
1675
1676 /* Return non-zero if ADDR is within the range of a watchpoint spanning
1677    LENGTH bytes beginning at START.  */
1678 #define target_watchpoint_addr_within_range(target, addr, start, length) \
1679   (*target.to_watchpoint_addr_within_range) (target, addr, start, length)
1680
1681 /* Return non-zero if the target is capable of using hardware to evaluate
1682    the condition expression.  In this case, if the condition is false when
1683    the watched memory location changes, execution may continue without the
1684    debugger being notified.
1685
1686    Due to limitations in the hardware implementation, it may be capable of
1687    avoiding triggering the watchpoint in some cases where the condition
1688    expression is false, but may report some false positives as well.
1689    For this reason, GDB will still evaluate the condition expression when
1690    the watchpoint triggers.  */
1691 #define target_can_accel_watchpoint_condition(addr, len, type, cond) \
1692   (*current_target.to_can_accel_watchpoint_condition) (&current_target, \
1693                                                        addr, len, type, cond)
1694
1695 /* Return number of debug registers needed for a masked watchpoint,
1696    -1 if masked watchpoints are not supported or -2 if the given address
1697    and mask combination cannot be used.  */
1698
1699 extern int target_masked_watch_num_registers (CORE_ADDR addr, CORE_ADDR mask);
1700
1701 /* Target can execute in reverse?  */
1702 #define target_can_execute_reverse \
1703      (current_target.to_can_execute_reverse ? \
1704       current_target.to_can_execute_reverse (&current_target) : 0)
1705
1706 extern const struct target_desc *target_read_description (struct target_ops *);
1707
1708 #define target_get_ada_task_ptid(lwp, tid) \
1709      (*current_target.to_get_ada_task_ptid) (&current_target, lwp,tid)
1710
1711 /* Utility implementation of searching memory.  */
1712 extern int simple_search_memory (struct target_ops* ops,
1713                                  CORE_ADDR start_addr,
1714                                  ULONGEST search_space_len,
1715                                  const gdb_byte *pattern,
1716                                  ULONGEST pattern_len,
1717                                  CORE_ADDR *found_addrp);
1718
1719 /* Main entry point for searching memory.  */
1720 extern int target_search_memory (CORE_ADDR start_addr,
1721                                  ULONGEST search_space_len,
1722                                  const gdb_byte *pattern,
1723                                  ULONGEST pattern_len,
1724                                  CORE_ADDR *found_addrp);
1725
1726 /* Target file operations.  */
1727
1728 /* Open FILENAME on the target, using FLAGS and MODE.  Return a
1729    target file descriptor, or -1 if an error occurs (and set
1730    *TARGET_ERRNO).  */
1731 extern int target_fileio_open (const char *filename, int flags, int mode,
1732                                int *target_errno);
1733
1734 /* Write up to LEN bytes from WRITE_BUF to FD on the target.
1735    Return the number of bytes written, or -1 if an error occurs
1736    (and set *TARGET_ERRNO).  */
1737 extern int target_fileio_pwrite (int fd, const gdb_byte *write_buf, int len,
1738                                  ULONGEST offset, int *target_errno);
1739
1740 /* Read up to LEN bytes FD on the target into READ_BUF.
1741    Return the number of bytes read, or -1 if an error occurs
1742    (and set *TARGET_ERRNO).  */
1743 extern int target_fileio_pread (int fd, gdb_byte *read_buf, int len,
1744                                 ULONGEST offset, int *target_errno);
1745
1746 /* Close FD on the target.  Return 0, or -1 if an error occurs
1747    (and set *TARGET_ERRNO).  */
1748 extern int target_fileio_close (int fd, int *target_errno);
1749
1750 /* Unlink FILENAME on the target.  Return 0, or -1 if an error
1751    occurs (and set *TARGET_ERRNO).  */
1752 extern int target_fileio_unlink (const char *filename, int *target_errno);
1753
1754 /* Read value of symbolic link FILENAME on the target.  Return a
1755    null-terminated string allocated via xmalloc, or NULL if an error
1756    occurs (and set *TARGET_ERRNO).  */
1757 extern char *target_fileio_readlink (const char *filename, int *target_errno);
1758
1759 /* Read target file FILENAME.  The return value will be -1 if the transfer
1760    fails or is not supported; 0 if the object is empty; or the length
1761    of the object otherwise.  If a positive value is returned, a
1762    sufficiently large buffer will be allocated using xmalloc and
1763    returned in *BUF_P containing the contents of the object.
1764
1765    This method should be used for objects sufficiently small to store
1766    in a single xmalloc'd buffer, when no fixed bound on the object's
1767    size is known in advance.  */
1768 extern LONGEST target_fileio_read_alloc (const char *filename,
1769                                          gdb_byte **buf_p);
1770
1771 /* Read target file FILENAME.  The result is NUL-terminated and
1772    returned as a string, allocated using xmalloc.  If an error occurs
1773    or the transfer is unsupported, NULL is returned.  Empty objects
1774    are returned as allocated but empty strings.  A warning is issued
1775    if the result contains any embedded NUL bytes.  */
1776 extern char *target_fileio_read_stralloc (const char *filename);
1777
1778
1779 /* Tracepoint-related operations.  */
1780
1781 #define target_trace_init() \
1782   (*current_target.to_trace_init) ()
1783
1784 #define target_download_tracepoint(t) \
1785   (*current_target.to_download_tracepoint) (t)
1786
1787 #define target_can_download_tracepoint() \
1788   (*current_target.to_can_download_tracepoint) ()
1789
1790 #define target_download_trace_state_variable(tsv) \
1791   (*current_target.to_download_trace_state_variable) (tsv)
1792
1793 #define target_enable_tracepoint(loc) \
1794   (*current_target.to_enable_tracepoint) (loc)
1795
1796 #define target_disable_tracepoint(loc) \
1797   (*current_target.to_disable_tracepoint) (loc)
1798
1799 #define target_trace_start() \
1800   (*current_target.to_trace_start) ()
1801
1802 #define target_trace_set_readonly_regions() \
1803   (*current_target.to_trace_set_readonly_regions) ()
1804
1805 #define target_get_trace_status(ts) \
1806   (*current_target.to_get_trace_status) (ts)
1807
1808 #define target_get_tracepoint_status(tp,utp)            \
1809   (*current_target.to_get_tracepoint_status) (tp, utp)
1810
1811 #define target_trace_stop() \
1812   (*current_target.to_trace_stop) ()
1813
1814 #define target_trace_find(type,num,addr1,addr2,tpp) \
1815   (*current_target.to_trace_find) ((type), (num), (addr1), (addr2), (tpp))
1816
1817 #define target_get_trace_state_variable_value(tsv,val) \
1818   (*current_target.to_get_trace_state_variable_value) ((tsv), (val))
1819
1820 #define target_save_trace_data(filename) \
1821   (*current_target.to_save_trace_data) (filename)
1822
1823 #define target_upload_tracepoints(utpp) \
1824   (*current_target.to_upload_tracepoints) (utpp)
1825
1826 #define target_upload_trace_state_variables(utsvp) \
1827   (*current_target.to_upload_trace_state_variables) (utsvp)
1828
1829 #define target_get_raw_trace_data(buf,offset,len) \
1830   (*current_target.to_get_raw_trace_data) ((buf), (offset), (len))
1831
1832 #define target_get_min_fast_tracepoint_insn_len() \
1833   (*current_target.to_get_min_fast_tracepoint_insn_len) ()
1834
1835 #define target_set_disconnected_tracing(val) \
1836   (*current_target.to_set_disconnected_tracing) (val)
1837
1838 #define target_set_circular_trace_buffer(val)   \
1839   (*current_target.to_set_circular_trace_buffer) (val)
1840
1841 #define target_set_trace_buffer_size(val)       \
1842   (*current_target.to_set_trace_buffer_size) (val)
1843
1844 #define target_set_trace_notes(user,notes,stopnotes)            \
1845   (*current_target.to_set_trace_notes) ((user), (notes), (stopnotes))
1846
1847 #define target_get_tib_address(ptid, addr) \
1848   (*current_target.to_get_tib_address) ((ptid), (addr))
1849
1850 #define target_set_permissions() \
1851   (*current_target.to_set_permissions) ()
1852
1853 #define target_static_tracepoint_marker_at(addr, marker) \
1854   (*current_target.to_static_tracepoint_marker_at) (addr, marker)
1855
1856 #define target_static_tracepoint_markers_by_strid(marker_id) \
1857   (*current_target.to_static_tracepoint_markers_by_strid) (marker_id)
1858
1859 #define target_traceframe_info() \
1860   (*current_target.to_traceframe_info) ()
1861
1862 #define target_use_agent(use) \
1863   (*current_target.to_use_agent) (use)
1864
1865 #define target_can_use_agent() \
1866   (*current_target.to_can_use_agent) ()
1867
1868 #define target_augmented_libraries_svr4_read() \
1869   (*current_target.to_augmented_libraries_svr4_read) ()
1870
1871 /* Command logging facility.  */
1872
1873 #define target_log_command(p)                                           \
1874   do                                                                    \
1875     if (current_target.to_log_command)                                  \
1876       (*current_target.to_log_command) (&current_target,                \
1877                                         p);                             \
1878   while (0)
1879
1880
1881 extern int target_core_of_thread (ptid_t ptid);
1882
1883 /* See to_get_unwinder in struct target_ops.  */
1884 extern const struct frame_unwind *target_get_unwinder (void);
1885
1886 /* See to_get_tailcall_unwinder in struct target_ops.  */
1887 extern const struct frame_unwind *target_get_tailcall_unwinder (void);
1888
1889 /* Verify that the memory in the [MEMADDR, MEMADDR+SIZE) range matches
1890    the contents of [DATA,DATA+SIZE).  Returns 1 if there's a match, 0
1891    if there's a mismatch, and -1 if an error is encountered while
1892    reading memory.  Throws an error if the functionality is found not
1893    to be supported by the current target.  */
1894 int target_verify_memory (const gdb_byte *data,
1895                           CORE_ADDR memaddr, ULONGEST size);
1896
1897 /* Routines for maintenance of the target structures...
1898
1899    complete_target_initialization: Finalize a target_ops by filling in
1900    any fields needed by the target implementation.
1901
1902    add_target:   Add a target to the list of all possible targets.
1903
1904    push_target:  Make this target the top of the stack of currently used
1905    targets, within its particular stratum of the stack.  Result
1906    is 0 if now atop the stack, nonzero if not on top (maybe
1907    should warn user).
1908
1909    unpush_target: Remove this from the stack of currently used targets,
1910    no matter where it is on the list.  Returns 0 if no
1911    change, 1 if removed from stack.  */
1912
1913 extern void add_target (struct target_ops *);
1914
1915 extern void add_target_with_completer (struct target_ops *t,
1916                                        completer_ftype *completer);
1917
1918 extern void complete_target_initialization (struct target_ops *t);
1919
1920 /* Adds a command ALIAS for target T and marks it deprecated.  This is useful
1921    for maintaining backwards compatibility when renaming targets.  */
1922
1923 extern void add_deprecated_target_alias (struct target_ops *t, char *alias);
1924
1925 extern void push_target (struct target_ops *);
1926
1927 extern int unpush_target (struct target_ops *);
1928
1929 extern void target_pre_inferior (int);
1930
1931 extern void target_preopen (int);
1932
1933 /* Does whatever cleanup is required to get rid of all pushed targets.  */
1934 extern void pop_all_targets (void);
1935
1936 /* Like pop_all_targets, but pops only targets whose stratum is
1937    strictly above ABOVE_STRATUM.  */
1938 extern void pop_all_targets_above (enum strata above_stratum);
1939
1940 extern int target_is_pushed (struct target_ops *t);
1941
1942 extern CORE_ADDR target_translate_tls_address (struct objfile *objfile,
1943                                                CORE_ADDR offset);
1944
1945 /* Struct target_section maps address ranges to file sections.  It is
1946    mostly used with BFD files, but can be used without (e.g. for handling
1947    raw disks, or files not in formats handled by BFD).  */
1948
1949 struct target_section
1950   {
1951     CORE_ADDR addr;             /* Lowest address in section */
1952     CORE_ADDR endaddr;          /* 1+highest address in section */
1953
1954     struct bfd_section *the_bfd_section;
1955
1956     /* The "owner" of the section.
1957        It can be any unique value.  It is set by add_target_sections
1958        and used by remove_target_sections.
1959        For example, for executables it is a pointer to exec_bfd and
1960        for shlibs it is the so_list pointer.  */
1961     void *owner;
1962   };
1963
1964 /* Holds an array of target sections.  Defined by [SECTIONS..SECTIONS_END[.  */
1965
1966 struct target_section_table
1967 {
1968   struct target_section *sections;
1969   struct target_section *sections_end;
1970 };
1971
1972 /* Return the "section" containing the specified address.  */
1973 struct target_section *target_section_by_addr (struct target_ops *target,
1974                                                CORE_ADDR addr);
1975
1976 /* Return the target section table this target (or the targets
1977    beneath) currently manipulate.  */
1978
1979 extern struct target_section_table *target_get_section_table
1980   (struct target_ops *target);
1981
1982 /* From mem-break.c */
1983
1984 extern int memory_remove_breakpoint (struct target_ops *, struct gdbarch *,
1985                                      struct bp_target_info *);
1986
1987 extern int memory_insert_breakpoint (struct target_ops *, struct gdbarch *,
1988                                      struct bp_target_info *);
1989
1990 extern int default_memory_remove_breakpoint (struct gdbarch *,
1991                                              struct bp_target_info *);
1992
1993 extern int default_memory_insert_breakpoint (struct gdbarch *,
1994                                              struct bp_target_info *);
1995
1996
1997 /* From target.c */
1998
1999 extern void initialize_targets (void);
2000
2001 extern void noprocess (void) ATTRIBUTE_NORETURN;
2002
2003 extern void target_require_runnable (void);
2004
2005 extern void find_default_attach (struct target_ops *, char *, int);
2006
2007 extern void find_default_create_inferior (struct target_ops *,
2008                                           char *, char *, char **, int);
2009
2010 extern struct target_ops *find_target_beneath (struct target_ops *);
2011
2012 /* Find the target at STRATUM.  If no target is at that stratum,
2013    return NULL.  */
2014
2015 struct target_ops *find_target_at (enum strata stratum);
2016
2017 /* Read OS data object of type TYPE from the target, and return it in
2018    XML format.  The result is NUL-terminated and returned as a string,
2019    allocated using xmalloc.  If an error occurs or the transfer is
2020    unsupported, NULL is returned.  Empty objects are returned as
2021    allocated but empty strings.  */
2022
2023 extern char *target_get_osdata (const char *type);
2024
2025 \f
2026 /* Stuff that should be shared among the various remote targets.  */
2027
2028 /* Debugging level.  0 is off, and non-zero values mean to print some debug
2029    information (higher values, more information).  */
2030 extern int remote_debug;
2031
2032 /* Speed in bits per second, or -1 which means don't mess with the speed.  */
2033 extern int baud_rate;
2034 /* Timeout limit for response from target.  */
2035 extern int remote_timeout;
2036
2037 \f
2038
2039 /* Set the show memory breakpoints mode to show, and installs a cleanup
2040    to restore it back to the current value.  */
2041 extern struct cleanup *make_show_memory_breakpoints_cleanup (int show);
2042
2043 extern int may_write_registers;
2044 extern int may_write_memory;
2045 extern int may_insert_breakpoints;
2046 extern int may_insert_tracepoints;
2047 extern int may_insert_fast_tracepoints;
2048 extern int may_stop;
2049
2050 extern void update_target_permissions (void);
2051
2052 \f
2053 /* Imported from machine dependent code.  */
2054
2055 /* Blank target vector entries are initialized to target_ignore.  */
2056 void target_ignore (void);
2057
2058 /* See to_supports_btrace in struct target_ops.  */
2059 #define target_supports_btrace() \
2060   (current_target.to_supports_btrace (&current_target))
2061
2062 /* See to_enable_btrace in struct target_ops.  */
2063 extern struct btrace_target_info *target_enable_btrace (ptid_t ptid);
2064
2065 /* See to_disable_btrace in struct target_ops.  */
2066 extern void target_disable_btrace (struct btrace_target_info *btinfo);
2067
2068 /* See to_teardown_btrace in struct target_ops.  */
2069 extern void target_teardown_btrace (struct btrace_target_info *btinfo);
2070
2071 /* See to_read_btrace in struct target_ops.  */
2072 extern enum btrace_error target_read_btrace (VEC (btrace_block_s) **,
2073                                              struct btrace_target_info *,
2074                                              enum btrace_read_type);
2075
2076 /* See to_stop_recording in struct target_ops.  */
2077 extern void target_stop_recording (void);
2078
2079 /* See to_info_record in struct target_ops.  */
2080 extern void target_info_record (void);
2081
2082 /* See to_save_record in struct target_ops.  */
2083 extern void target_save_record (const char *filename);
2084
2085 /* Query if the target supports deleting the execution log.  */
2086 extern int target_supports_delete_record (void);
2087
2088 /* See to_delete_record in struct target_ops.  */
2089 extern void target_delete_record (void);
2090
2091 /* See to_record_is_replaying in struct target_ops.  */
2092 extern int target_record_is_replaying (void);
2093
2094 /* See to_goto_record_begin in struct target_ops.  */
2095 extern void target_goto_record_begin (void);
2096
2097 /* See to_goto_record_end in struct target_ops.  */
2098 extern void target_goto_record_end (void);
2099
2100 /* See to_goto_record in struct target_ops.  */
2101 extern void target_goto_record (ULONGEST insn);
2102
2103 /* See to_insn_history.  */
2104 extern void target_insn_history (int size, int flags);
2105
2106 /* See to_insn_history_from.  */
2107 extern void target_insn_history_from (ULONGEST from, int size, int flags);
2108
2109 /* See to_insn_history_range.  */
2110 extern void target_insn_history_range (ULONGEST begin, ULONGEST end, int flags);
2111
2112 /* See to_call_history.  */
2113 extern void target_call_history (int size, int flags);
2114
2115 /* See to_call_history_from.  */
2116 extern void target_call_history_from (ULONGEST begin, int size, int flags);
2117
2118 /* See to_call_history_range.  */
2119 extern void target_call_history_range (ULONGEST begin, ULONGEST end, int flags);
2120
2121 /* See to_decr_pc_after_break.  Start searching for the target at OPS.  */
2122 extern CORE_ADDR forward_target_decr_pc_after_break (struct target_ops *ops,
2123                                                      struct gdbarch *gdbarch);
2124
2125 /* See to_decr_pc_after_break.  */
2126 extern CORE_ADDR target_decr_pc_after_break (struct gdbarch *gdbarch);
2127
2128 #endif /* !defined (TARGET_H) */