1 2014-10-30 Janis Johnson <janisjo@codesourcery.com>
3 * gdb.base/fullpath-expand.exp: Skip for a remote host.
4 * gdb.base/realname-expand.exp: Likewise.
5 * gdb.linespec/macro-relative.exp: Likewise.
7 2014-10-29 Pedro Alves <palves@redhat.com>
10 * gdb.threads/schedlock.c (some_function): New function.
11 (call_function): New global.
12 (MAYBE_CALL_SOME_FUNCTION): New macro.
13 (thread_function): Call it.
14 * gdb.threads/schedlock.exp (get_args): Add description parameter,
15 and use it instead of a global counter. Adjust all callers.
16 (get_current_thread): Use "find current thread" for test message
17 here rather than having all callers pass down the same string.
18 (goto_loop): New procedure, factored out from ...
19 (my_continue): ... this.
20 (step_ten_loops): Change parameter from test message to command to
22 (list_count): Delete global.
23 (check_result): New procedure, factored out from duplicate top
25 (continue tests): Wrap in with_test_prefix.
26 (test_step): New procedure, factored out from duplicate top level
28 (top level): Test "step" in combination with all scheduler-locking
29 modes. Test "next" in combination with all scheduler-locking
30 modes, and in combination with stepping over a function call or
32 * gdb.threads/next-bp-other-thread.c: New file.
33 * gdb.threads/next-bp-other-thread.exp: New file.
35 2014-10-29 Pedro Alves <palves@redhat.com>
38 * gdb.python/python.exp: Test a multi-line command that spawns
40 * gdb.base/multi-line-starts-subshell.exp: New file.
42 2014-10-29 Yao Qi <yao@codesourcery.com>
44 * gdb.base/fileio.exp: Make directories on host.
46 2014-10-29 Yao Qi <yao@codesourcery.com>
48 * gdb.base/fileio.c (test_write): Close the file.
50 2014-10-28 Pedro Alves <palves@redhat.com>
53 * gdb.base/sigstep.c (no_handler): New global.
54 (main): If 'no_handler is true, set the signal handlers to
56 * gdb.base/sigstep.exp (breakpoint_over_handler): Add
57 with_sw_watch and no_handler parameters. Handle them.
58 (top level) <stepping over handler when stopped at a breakpoint
59 test>: Add a test axis for testing with a software watchpoint, and
60 another for testing with the signal handler set to SIG_IGN.
61 * gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
62 * gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
64 2014-10-28 Pedro Alves <palves@redhat.com>
67 * gdb.base/sigstep.c (handler): Add a few more writes to 'done'.
68 * gdb.base/sigstep.exp (other_handler_location): New global.
69 (advance): Support stepping into the signal handler, and running
70 commands while in the handler.
71 (in_handler_map): New global.
72 (top level): In the advance test, add combinations for getting
73 into the handler with stepping commands, and for running commands
74 in the handler. Add comment descripting the advancei tests.
76 2014-10-28 Pedro Alves <palves@redhat.com>
78 * gdb.base/sigstep.exp: Use build_executable instead of
80 (top level): Move code that starts GDB, runs to main and creates a
82 (restart): ... this new procedure.
83 (top level): Move backtrace from signal handler test to ...
84 (validate_backtrace): ... this new procedure.
85 (advance, advancei): Rename parameter from 'i' to 'cmd'. Use
86 with_test_prefix. Always restart GDB.
87 (skip_to_handler): Rename parameter from 'i' to 'cmd'. Use
88 with_test_prefix. Always restart GDB. No need to delete
89 breakpoints after the test.
90 (test_skip_handler): Remove prefix parameter.
91 (skip_over_handler, breakpoint_to_handler)
92 (breakpoint_to_handler_entry, breakpoint_over_handler): Rename
93 parameter from 'i' to 'cmd'. Use with_test_prefix. Always
94 restart GDB. No need to delete breakpoints after the test.
95 (top level): Use foreach to call the test procedures with
98 2014-10-28 Pedro Alves <palves@redhat.com>
100 * gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers
101 instead of GNATS numbers.
102 * gdb.base/sigbpt.exp: Likewise.
103 * gdb.base/siginfo.exp: Likewise.
104 * gdb.base/sigstep.exp: Likewise.
106 2014-10-27 Pedro Alves <palves@redhat.com>
108 * gdb.base/sigstep.c (dummy): New global.
109 (main): Issue a couple writes to the new global.
110 * gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New
112 (skip_over_handler): Use test_skip_handler.
113 (top level): Call skip_over_handler for stepi and nexti too.
114 (breakpoint_over_handler): Use test_skip_handler.
115 (top level): Call breakpoint_over_handler for stepi and nexti too.
117 2014-10-27 Yao Qi <yao@codesourcery.com>
119 * gdb.trace/tfile.c (adjust_function_address)
120 [__powerpc64__ && _CALL_ELF != 2]: Get function address from
123 2014-10-24 Don Breazeal <donb@codesourcery.com>
125 * gdb.base/foll-fork.exp (test_follow_fork,
126 catch_fork_child_follow): Check for updated fork messages emitted
128 * gdb.base/foll-vfork.exp (vfork_parent_follow_through_step,
129 vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp,
130 vfork_and_exec_child_follow_through_step): Check for updated vfork
131 messages emitted from infrun.c.
133 2014-10-24 Pedro Alves <palves@redhat.com>
135 * gdb.base/corefile.exp: Remove references to ultrix.
136 * gdb.base/interrupt.exp: Likewise.
137 * gdb.base/whatis.exp: Likewise.
138 * gdb.gdb/selftest.exp: Likewise.
139 * gdb.threads/manythreads.exp: Likewise.
140 * gdb.threads/print-threads.exp: Likewise.
141 * gdb.threads/pthreads.exp:: Likewise.
142 * gdb.threads/schedlock.exp: Likewise.
144 2014-10-24 Siva Chandra Reddy <sivachandra@google.com>
146 * gdb.cp/non-trivial-retval.cc: Add a test case.
147 * gdb.cp/non-trivial-retval.exp: Add a test.
149 2014-10-20 Yao Qi <yao@codesourcery.com>
151 * gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
152 * gdb.python/py-objfile-script-gdb.py: New file.
153 * gdb.python/py-objfile-script.exp: Update reference to
154 py-objfile-script-gdb.py.in. Use gdb_remote_donwload instead
155 of remote_download. Remove the dest file.
157 2014-10-20 Yao Qi <yao@codesourcery.com>
159 * gdb.base/checkpoint.exp: Don't remove file copied on host.
160 * gdb.base/step-line.exp: Likewise.
161 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
162 * gdb.dwarf2/dw2-basic.exp: Likewise.
163 * gdb.dwarf2/dw2-compressed.exp: Likewise.
164 * gdb.dwarf2/dw2-filename.exp: Likewise.
165 * gdb.dwarf2/dw2-intercu.exp: Likewise.
166 * gdb.dwarf2/dw2-intermix.exp: Likewise.
167 * gdb.dwarf2/dw2-producer.exp: Likewise.
168 * gdb.dwarf2/mac-fileno.exp: Likewise.
169 * gdb.python/py-frame-args.exp: Likewise.
170 * gdb.python/py-framefilter.exp: Likewise.
171 * gdb.python/py-mi.exp: Likewise.
172 * gdb.python/py-objfile-script.exp: Likewise
173 * gdb.python/py-pp-integral.exp: Likewise.
174 * gdb.python/py-pp-re-notag.exp: Likewise.
175 * gdb.python/py-prettyprint.exp: Likewise.
176 * gdb.python/py-section-script.exp: Likewise.
177 * gdb.python/py-typeprint.exp: Likewise.
178 * gdb.python/py-xmethods.exp: Likewise.
179 * gdb.stabs/weird.exp: Likewise.
180 * gdb.xml/tdesc-regs.exp: Likewise.
182 2014-10-18 Kwok Cheung Yeung <kcy@codesourcery.com>
184 * gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
185 (out_cu): Use addr_len for the size of addresses.
186 (out_line): Likewise. Size DW_LNE_set_address instruction
187 according to addr_len.
188 * gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
189 (FUNC): Add START_INSNS to definition.
191 2014-10-18 Yao Qi <yao@codesourcery.com>
193 * gdb.base/argv0-symlink.exp: Check argv[0] value if
194 gdb_has_argv0 return true.
195 * gdb.guile/scm-value.exp (test_value_in_inferior): Don't
196 check [target_info exists noargs], check [gdb_has_argv0]
198 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
199 * lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
202 2014-10-17 Doug Evans <dje@google.com>
204 * gdb.python/py-events.exp: Update expected output for clear_objfiles
206 * gdb.python/py-events.py: Add clear_objfiles event.
208 2014-10-17 Doug Evans <dje@google.com>
210 * gdb.python/py-objfile.exp: Test progspace attribute.
212 2014-10-17 Luis Machado <lgustavo@codesourcery.com>
214 * gdb.guile/scm-breakpoint.exp: Do not assume any
215 directory separators when matching source file paths.
216 * gdb.python/py-breakpoint.exp: Likewise.
217 * gdb.reverse/break-precsave.exp: Likewise.
218 * gdb.reverse/break-reverse.exp: Likewise.
219 * gdb.reverse/consecutive-precsave.exp: Likewise.
220 * gdb.reverse/finish-precsave.exp: Likewise.
221 * gdb.reverse/finish-reverse-bkpt.exp: Likewise.
222 * gdb.reverse/finish-reverse.exp: Likewise.
223 * gdb.reverse/i386-precsave.exp: Likewise.
224 * gdb.reverse/i387-env-reverse.exp: Likewise.
225 * gdb.reverse/i387-stack-reverse.exp: Likewise.
226 * gdb.reverse/machinestate-precsave.exp: Likewise.
227 * gdb.reverse/machinestate.exp: Likewise.
228 * gdb.reverse/sigall-precsave.exp: Likewise.
229 * gdb.reverse/solib-precsave.exp: Likewise.
230 * gdb.reverse/step-precsave.exp: Likewise.
231 * gdb.reverse/until-precsave.exp: Likewise.
232 * gdb.reverse/watch-precsave.exp: Likewise.
233 * gdb.reverse/watch-reverse.exp: Likewise.
235 2014-10-17 Yao Qi <yao@codesourcery.com>
237 * lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
238 * gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
240 2014-10-17 Pedro Alves <palves@redhat.com>
243 * gdb.base/bg-execution-repeat.c: New file.
244 * gdb.base/bg-execution-repeat.exp: New file.
246 2014-10-17 Pedro Alves <palves@redhat.com>
249 * gdb.base/continue-all-already-running.c: New file.
250 * gdb.base/continue-all-already-running.exp: New file.
252 2014-10-17 Pedro Alves <palves@redhat.com>
255 * gdb.base/annota-input-while-running.c: New file.
256 * gdb.base/annota-input-while-running.exp: New file.
258 2014-10-17 Pedro Alves <palves@redhat.com>
260 * gdb.base/callfuncs.exp: emove references to osf.
261 * gdb.base/sigall.exp: Likewise.
262 * gdb.gdb/selftest.exp: Likewise.
263 * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
264 * gdb.mi/non-stop.c: Likewise.
265 * gdb.mi/pthreads.c: Likewise.
266 * gdb.reverse/sigall-precsave.exp: Likewise.
267 * gdb.reverse/sigall-reverse.exp: Likewise.
268 * gdb.threads/pthreads.c: Likewise.
269 * gdb.threads/pthreads.exp: Likewise.
271 2014-10-17 Yao Qi <yao@codesourcery.com>
273 * gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't
274 check 'target_info exists noargs'.
275 (test_command_prompt_position): Likewise.
276 (progvar_simple_if_test): Don't check 'target_info exists noargs'.
278 (progvar_simple_while_test): Likewise.
279 (progvar_complex_if_while_test): Likewise.
280 (if_while_breakpoint_command_test): Likewise.
281 (infrun_breakpoint_command_test): Likewise.
282 (breakpoint_command_test): Likewise.
283 (watchpoint_command_test): Likewise.
284 (bp_deleted_in_command_test): Likewise.
285 (temporary_breakpoint_commands): Likewise.
287 2014-10-16 Yao Qi <yao@codesourcery.com>
289 * gdb.base/remotetimeout.exp: Remove noargs checking.
291 2014-10-15 Pedro Alves <palves@redhat.com>
294 * gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
295 * gdb.base/breakpoint-in-ro-region.exp
296 (probe_target_hardware_step): New procedure.
297 (top level): Probe hardware stepping and hardware breakpoint
298 support. Test stepping through a read-only region, with both
299 "breakpoint auto-hw" on and off and both "always-inserted" on and
302 2014-10-15 Iain Buclaw <ibuclaw@gdcproject.org>
304 * gdb.dlang/demangle.exp: Update for demangling changes.
306 2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
308 * gdb.cp/non-trivial-retval.cc: Add new test cases.
309 * gdb.cp/non-trivial-retval.exp: Add new tests.
311 2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
315 * gdb.cp/non-trivial-retval.cc: New file.
316 * gdb.cp/non-trivial-retval.exp: New file.
318 2014-10-15 Yao Qi <yao@codesourcery.com>
320 * gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
323 2014-10-15 Yao Qi <yao@codesourcery.com>
325 * gdb.python/py-symbol.exp: Match file base name if host is
326 remote, otherwise match file name with dir name.
327 * gdb.python/py-symtab.exp: Likewise.
328 * gdb.python/python.exp: Likewise.
330 2014-10-15 Yao Qi <yao@codesourcery.com>
332 * gdb.python/py-symbol.exp: Remove trailing ".*" in the
334 * gdb.python/py-symtab.exp: Likewise.
335 * gdb.python/python.exp: Remove trailing ".*". Fix typo
338 2014-10-14 Joel Brobecker <brobecker@adacore.com>
340 * gdb.ada/addr_arith: New testcase.
342 2014-10-14 Maciej W. Rozycki <macro@codesourcery.com>
344 * gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
345 * gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
346 * gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
347 * gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.
349 2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
351 * gdb.arch/stap-eval-lang-ada.S: Likewise.
352 * gdb.arch/stap-eval-lang-ada.c: Likewise.
353 * gdb.arch/stap-eval-lang-ada.exp: New file.
355 2014-10-14 Yao Qi <yao@codesourcery.com>
357 * gdb.mi/mi-var-child.c (nothing1): New function.
358 (nothing2): New function.
359 (do_children_tests): Set function pointers by nothing1 and
361 * gdb.mi/mi-var-child.exp: Step over new added statements.
362 Update test to match the new output.
363 * gdb.mi/var-cmd.c (nothing1): New function.
364 (nothing2): New function.
365 (do_children_tests): Set function pointers by nothing1 and
367 * gdb.mi/mi-var-display.exp: Update test to match output.
368 Step to the line specified by $line_dct_nothing.
369 Increase the number of lines to step.
371 2014-10-14 Yao Qi <yao@codesourcery.com>
373 * gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
375 * gdb.mi/mi2-var-child.exp: Likewise.
377 2014-10-13 Doug Evans <dje@google.com>
379 * gdb.python/py-objfile.exp: Change name of file name test.
381 2014-10-13 Doug Evans <dje@google.com>
383 * gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
384 from the start of the CU.
386 2014-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
387 Yao Qi <yao@codesourcery.com>
389 Fix "save breakpoints" for "catch" command.
390 * gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
391 Remove -nonewline. Match also the added "main" line.
393 2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
395 Fix "save breakpoints" for "disable $bpnum" command.
396 * gdb.base/save-bp.c (main): Add label.
397 * gdb.base/save-bp.exp: Add 8th disabled breakpoint. Match it.
399 2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
401 * gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
403 2014-10-11 Yao Qi <yao@codesourcery.com>
405 * gdb.server/server-kill.exp: Execute command
406 "set remote trace-status-packet on" before "tstatus".
408 2014-10-11 Yao Qi <yao@codesourcery.com>
410 * gdb.server/server-kill.c: Include sys/types.h and unistd.h.
411 (main): Call getppid.
412 * gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
413 and continue to it. Read variable "server_pid".
415 2014-10-11 Yao Qi <yao@codesourcery.com>
417 * gdb.server/server-kill.exp: Remove "delete_breakpoints".
419 2014-10-11 Yao Qi <yao@codesourcery.com>
421 * gdb.threads/thread-find.exp: Don't execute command
423 * gdb.threads/attach-into-signal.exp (corefunc): Likewise.
424 * gdb.threads/linux-dp.exp: Don't check the condition
425 $threads_created equals to zero.
427 2014-10-10 Pedro Alves <palves@redhat.com>
429 * gdb.base/bigcore.exp: Remove references to IRIX.
430 * gdb.base/funcargs.exp: Likewise.
431 * gdb.base/interrupt.exp: Likewise.
432 * gdb.base/mips_pro.exp: Likewise.
433 * gdb.base/nodebug.exp: Likewise.
434 * gdb.base/setvar.exp: Likewise.
435 * lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
437 2014-10-10 Jan Kratochvil <jan.kratochvil@redhat.com>
438 Pedro Alves <palves@redhat.com>
441 * gdb.base/vdso-warning.c: New file.
442 * gdb.base/vdso-warning.exp: New file.
444 2014-10-02 Doug Evans <dje@google.com>
446 * gdb.base/structs.c (main): Don't run forever.
448 2014-10-02 Pedro Alves <palves@redhat.com>
450 * gdb.threads/manythreads.exp (interrupt_and_wait): New procedure.
451 (top level) <stop threads 1, stop threads 2>: Use it.
453 2014-10-02 Pedro Alves <palves@redhat.com>
455 * gdb.threads/break-while-running.exp (test): Add new
456 'update_thread_list' argument. Skip "info threads" if false.
457 (top level): Add new 'update_thread_list' axis.
459 2014-10-02 Pedro Alves <palves@redhat.com>
462 * gdb.base/execl-update-breakpoints.c: New file.
463 * gdb.base/execl-update-breakpoints.exp: New file.
465 2014-10-01 Pedro Alves <palves@redhat.com>
467 * gdb.base/breakpoint-in-ro-region.c: New file.
468 * gdb.base/breakpoint-in-ro-region.exp: New file.
470 2014-10-01 Simon Marchi <simon.marchi@ericsson.com>
472 * gdb.mi/mi-exit-code.exp: New file.
473 * gdb.mi/mi-exit-code.c: New file.
475 2014-09-30 Yao Qi <yao@codesourcery.com>
477 * lib/prelink-support.exp (build_executable_own_libs): Error if
478 the target isn't native.
480 2014-09-30 Yao Qi <yao@codesourcery.com>
482 * gdb.threads/dlopen-libpthread.exp: Skip it if isnative is
485 2014-09-22 Pedro Alves <palves@redhat.com>
487 * gdb.threads/break-while-running.exp: New file.
488 * gdb.threads/break-while-running.c: New file.
490 2014-09-19 Yao Qi <yao@codesourcery.com>
492 * gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test.
493 Invoke test. Restart GDB with --readnow and invoke test again.
495 2014-09-19 Yao Qi <yao@codesourcery.com>
497 * gdb.base/break-on-linker-gcd-function.exp: Move test into new
498 proc set_breakpoint_on_gcd_function. Invoke
499 set_breakpoint_on_gcd_function. Restart GDB with --readnow and
500 invoke set_breakpoint_on_gcd_function again.
502 2014-09-18 Doug Evans <dje@google.com>
504 * gdb.dwarf2/symtab-producer.exp: New file.
506 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
508 * gdb.base/global-var-nested-by-dso-solib1.c: New file.
509 * gdb.base/global-var-nested-by-dso-solib2.c: Likewise.
510 * gdb.base/global-var-nested-by-dso.c: Likewise.
511 * gdb.base/global-var-nested-by-dso.exp: Likewise.
513 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
514 Pedro Alves <palves@redhat.com>
516 * gdb.base/watch-bitfields.exp: Pass string other than test file
517 name to prepare_for_testing.
518 (watch): New procedure.
519 (expect_watchpoint): Use with_test_prefix.
520 (top level): Factor out tests to ...
521 (test_watch_location, test_regular_watch): ... these new
522 procedures, and use with_test_prefix and gdb_continue_to_end.
524 2014-09-16 Patrick Palka <patrick@parcs.ath.cx>
527 * gdb.base/watch-bitfields.exp: New file.
528 * gdb.base/watch-bitfields.c: New file.
530 2014-09-16 Pedro Alves <palves@redhat.com>
532 * gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare
533 software and hardware addresses, not software address against
536 2014-09-16 Pedro Alves <palves@redhat.com>
538 * gdb.base/watchpoint-stops-at-right-insn.c: New file.
539 * gdb.base/watchpoint-stops-at-right-insn.exp: New file.
541 2014-09-16 Pedro Alves <palves@redhat.com>
543 * config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete
545 * gdb.base/a2-run.exp: Remove all code guarded by istarget
546 "*-*-vxworks*" throughout.
547 * gdb.base/break.exp: Likewise.
548 * gdb.base/default.exp: Likewise.
549 * gdb.base/scope.exp: Likewise.
550 * gdb.base/sepdebug.exp: Likewise.
551 * gdb.base/break.c: Remove all code guarded by #ifdef vxworks
553 * gdb.base/run.c: Likewise.
554 * gdb.base/sepdebug.c: Likewise.
555 * gdb.hp/gdb.aCC/run.c: Likewise.
556 * gdb.reverse/until-reverse.c: Likewise.
557 * lib/gdb.exp (gdb_compile): Remove is_vxworks branch.
559 2014-09-16 Yao Qi <yao@codesourcery.com>
561 * boards/local-remote-host-native.exp: New file.
563 2014-09-14 Doug Evans <xdje42@gmail.com>
565 * gdb.threads/queue-signal.c (thread_count): New variable.
566 (thread_count_mutex, thread_count_condvar): New variables.
567 (incr_thread_count, wait_all_threads_running): New functions.
568 (main): Wait for all threads to be in their thread functions.
570 2014-09-13 Doug Evans <xdje42@gmail.com>
572 * gdb.threads/queue-signal.c: New file.
573 * gdb.threads/queue-signal.exp: New file.
575 2014-09-13 Doug Evans <xdje42@gmail.com>
577 * lib/gdb.exp (gdb_prompt): Add comment and change initial value to
578 be consistent with what default_gdb_init uses.
579 (with_gdb_prompt): Change form of PROMPT argument from a regexp to
580 the plain text of the prompt. Add some logging printfs.
581 * gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
583 2014-09-12 Pedro Alves <palves@redhat.com>
585 * gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
586 gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
587 * gdb.arch/i386-size-overlap.exp: Likewise.
588 * gdb.arch/i386-size.exp: Likewise.
589 * gdb.arch/i386-unwind.exp: Likewise.
590 * gdb.base/a2-run.exp: Likewise.
591 * gdb.base/break.exp: Likewise.
592 * gdb.base/charset.exp: Likewise.
593 * gdb.base/chng-syms.exp: Likewise.
594 * gdb.base/commands.exp: Likewise.
595 * gdb.base/dbx.exp: Likewise.
596 * gdb.base/find.exp: Likewise.
597 * gdb.base/funcargs.exp: Likewise.
598 * gdb.base/jit-simple.exp: Likewise.
599 * gdb.base/reread.exp: Likewise.
600 * gdb.base/sepdebug.exp: Likewise.
601 * gdb.base/step-bt.exp: Likewise.
602 * gdb.cp/mb-inline.exp: Likewise.
603 * gdb.cp/mb-templates.exp: Likewise.
604 * gdb.objc/basicclass.exp: Likewise.
605 * gdb.threads/killed.exp: Likewise.
607 2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
610 * gdb.arch/powerpc-stackless.S: New file.
611 * gdb.arch/powerpc-stackless.exp: New file.
613 2014-09-12 Jan Kratochvil <jan.kratochvil@redhat.com>
615 * gdb.base/attach.c: Include unistd.h.
616 (main): Call alarm. Add label postloop.
617 * gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
618 gdb_breakpoint, gdb_continue_to_breakpoint.
619 (test_command_line_attach_run): Kill ${testpid} in one exit path.
621 2014-09-11 Pedro Alves <palves@redhat.com>
624 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
625 * gdb.base/attach.exp (test_command_line_attach_run): New
627 (top level): Call it.
629 2014-09-11 Pedro Alves <palves@redhat.com>
631 * lib/gdb.exp (spawn_wait_for_attach): New procedure.
632 * gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
633 (do_command_attach_tests): Use spawn_wait_for_attach.
634 * gdb.base/solib-overlap.exp: Likewise.
635 * gdb.multi/multi-attach.exp: Likewise.
636 * gdb.python/py-prompt.exp: Likewise.
637 * gdb.python/py-sync-interp.exp: Likewise.
638 * gdb.server/ext-attach.exp: Likewise.
640 2014-09-11 Gabriel Krisman Bertazi <gabriel@krisman.be>
642 * gdb.fortran/array-element.exp: Remove unexpected "continue"
643 command in testcase. Simplify testcase.
645 2014-09-10 Joel Brobecker <brobecker@adacore.com>
647 * gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests.
649 2014-09-10 Joel Brobecker <brobecker@adacore.com>
651 * gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.
653 2014-09-10 Joel Brobecker <brobecker@adacore.com>
655 * gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.
657 2014-09-10 Joel Brobecker <brobecker@adacore.com>
659 * gdb.dwarf2/dynarr-ptr.c: New file.
660 * gdb.dwarf2/dynarr-ptr.exp: New file.
662 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
664 * gdb.base/watchpoint-solib.exp: Increase the timeout by a factor
665 of 30 rather than hardcoding 120 for a slow test case. Take the
666 `gdb,timeout' target setting into account for this calculation.
667 Don't extend the timeout for the test cases that don't need it.
669 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
671 * gdb.reverse/sigall-reverse.exp: Increase the timeout by
672 a factor of 2 for a slow test case. Take the `gdb,timeout'
673 target setting into account for this calculation.
674 * gdb.reverse/until-precsave.exp: Increase the timeout by
675 a factor of 15 and 3 respectively rather than adding 120
676 for a pair of slow test cases. Take the `gdb,timeout'
677 target setting into account for this calculation.
679 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
681 * lib/gdb.exp (gdb_test_multiple): Remove code to select the
682 timeout, don't pass one down to gdb_expect.
683 (gdb_expect): Rework timeout selection.
685 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
687 * lib/gdbserver-support.exp (gdbserver_start): Throw an error
688 exception on timeout.
689 (gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
690 (gdbserver_start_extended): Catch any `gdbserver_start' error
692 (gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
693 * lib/mi-support.exp (mi_gdb_target_load): Catch any
694 `gdbserver_gdb_load' error exceptions.
696 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
698 * lib/gdbserver-support.exp (gdbserver_start): Set timeout to
699 120 on waiting for the TCP socket to open.
701 2014-09-09 Doug Evans <xdje42@gmail.com>
703 * gdb.base/default.exp (show_conv_list): Add _caller_is,
704 _caller_matches, _any_caller_is, _any_caller_matches.
706 2014-09-09 Doug Evans <xdje42@gmail.com>
708 * gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output.
710 2014-09-09 Yao Qi <yao@codesourcery.com>
712 * gdb.mi/mi-var-display.exp: Set print symbol off.
714 2014-09-07 Gabriel Krisman Bertazi <gabriel@krisman.be>
717 * gdb.base/commands.exp: Add tests to verify user-defined
718 commands with empty bodies.
719 * gdb.python/py-cmd.exp: Test that we don't show user-defined
720 python commands in `show user command`.
721 * gdb.python/scm-cmd.exp: Test that we don't show user-defined
722 scheme commands in `show user command`.
724 2014-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
727 * gdb.python/amd64-py-framefilter-invalidarg.S: New file.
728 * gdb.python/py-framefilter-invalidarg-gdb.py.in: New file.
729 * gdb.python/py-framefilter-invalidarg.exp: New file.
730 * gdb.python/py-framefilter-invalidarg.py: New file.
732 2014-09-06 Doug Evans <xdje42@gmail.com>
735 * gdb.python/py-caller-is.c: New file.
736 * gdb.python/py-caller-is.exp: New file.
738 2014-09-05 Sergio Durigan Junior <sergiodj@redhat.com>
741 * gdb.arch/amd64-stap-wrong-subexp.exp: New file.
742 * gdb.arch/amd64-stap-wrong-subexp.S: Likewise.
744 2014-09-04 Sergio Durigan Junior <sergiodj@redhat.com>
747 * gdb.fortran/print-formatted.exp: New file.
748 * gdb.fortran/print-formatted.f90: Likewise.
750 2014-09-03 Sasha Smundak <asmundak@google.com>
752 * gdb.python/py-frame.exp: Test Frame.read_register.
754 2014-09-03 Sergio Durigan Junior <sergiodj@redhat.com>
757 * gdb.python/py-completion.exp: New file.
758 * gdb.python/py-completion.py: Likewise.
760 2014-08-28 Doug Evans <dje@google.com>
762 * gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
763 eax,etc. are live with values set by gdb and thus the compiler can't
765 * gdb.arch/i386-pseudo.c (main): Ditto.
767 2014-08-27 Doug Evans <dje@google.com>
769 * lib/gdb.exp (gdb_compile_shlib): Add support for clang.
771 2014-08-25 Doug Evans <dje@google.com>
773 * gdb.mi/basics.c (callee3, callee2, callee1): Specify result type.
776 2014-08-25 Doug Evans <dje@google.com>
778 * gdb.threads/thread-execl.exp: #include <stdio.h>.
780 2014-08-24 Yao Qi <yao@codesourcery.com>
782 * gdb.guile/scm-value.exp (test_lazy_strings): Set print
784 * gdb.python/py-value.exp (test_lazy_strings): Likewise.
786 2014-08-22 Doug Evans <dje@google.com>
789 * gdb.dwarf2/dw2-single-line-discriminators.S: New file.
790 * gdb.dwarf2/dw2-single-line-discriminators.c: New file.
791 * gdb.dwarf2/dw2-single-line-discriminators.exp: New file.
793 2014-08-22 Yao Qi <yao@codesourcery.com>
795 * gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
796 * gdb.python/py-finish-breakpoint2.exp: Likewise.
797 * gdb.python/python.exp: Likewise. Use .py file on the host
798 instead of the build.
800 2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
802 * gdb.threads/gcore-stale-thread.c: New file.
803 * gdb.threads/gcore-stale-thread.exp: New file.
805 2014-08-21 Pedro Alves <palves@redhat.com>
807 * gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
808 * gdb.base/gcore-relro-pie.exp: Likewise.
809 * gdb.base/gcore-relro.exp: Likewise.
810 * gdb.base/gcore.exp: Likewise.
811 * gdb.base/print-symbol-loading.exp: Likewise.
812 * gdb.threads/gcore-thread.exp: Likewise.
813 * lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
815 2014-08-20 Pedro Alves <palves@redhat.com>
816 Jan Kratochvil <jan.kratochvil@redhat.com>
818 * Makefile.in (EXTRA_RULES, CC): New variables, get from
820 (EXPECT): Handle READ1 being set.
821 (all): Depend on EXTRA_RULES.
822 (check-read1, expect-read1, read1.so, read1): New rules.
823 * README (Testsuite Parameters): Document the READ1 make variable.
824 (Race detection): New section.
825 * configure: Regenerate.
826 * configure.ac: If build==host==target, and running under a
827 GNU/glibc system, add read1 to the extra Makefile rules.
828 (EXTRA_RULES): AC_SUBST it.
829 * lib/read1.c: New file.
831 2014-08-20 Joel Brobecker <brobecker@adacore.com>
833 * gdb.dwarf2/data-loc.exp: Add additional tests exercising
834 the handling of variables declared as a typedef to an array
835 which a DW_AT_data_location attribute.
837 2014-08-19 Andrew Burgess <aburgess@broadcom.com>
838 Pedro Alves <palves@redhat.com>
842 * gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
845 2014-08-19 Pedro Alves <palves@redhat.com>
847 * gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
849 2014-08-19 Yao Qi <yao@codesourcery.com>
851 * gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
854 2014-08-18 David Blaikie <dblaikie@gmail.com>
856 * boards/fission.exp: Explicitly pass -ggnu-pubnames for clang.
858 2014-08-18 Joel Brobecker <brobecker@adacore.com>
860 * gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
861 attribute in array range.
863 2014-08-18 Joel Brobecker <brobecker@adacore.com>
865 * gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
867 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
870 * gdb.cp/pr17132.cc: New file.
871 * gdb.cp/pr17132.exp: New file.
873 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
875 * gdb.python/py-xmethods.py (A_getarrayind)
876 (E_method_char_worker.__call__, E_method_int_worker.__call__):
877 Use 'print' with function call syntax.
878 (E_method_matcher.match): Fix tab vs space indentation mixup.
880 2014-08-15 Yao Qi <yao@codesourcery.com>
882 * gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
885 2014-08-15 Yao Qi <yao@codesourcery.com>
887 * gdb.cp/casts.exp: Set print symbol off.
888 * gdb.cp/class2.exp: Likewise.
889 * gdb.cp/overload.exp: Likewise.
890 * gdb.cp/templates.exp: Likewise.
892 2014-08-11 Doug Evans <dje@google.com>
894 * gdb.base/print-symbol-loading.exp (test_load_core): Update.
895 (test_load_shlib): Update.
897 2014-08-09 Yao Qi <yao@codesourcery.com>
899 * gdb.base/display.exp: Invoke is_address_zero_readable.
900 * gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
901 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
902 * gdb.base/hbreak-unmapped.exp: Return if
903 is_address_zero_readable returns true.
904 * gdb.base/signest.exp: Likewise.
905 * gdb.base/signull.exp: Likewise.
906 * gdb.base/sigbpt.exp: Likewise.
907 * gdb.guile/scm-disasm.exp: Do the test if
908 is_address_zero_readable returns false.
909 * gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
910 * gdb.python/py-arch.exp: Likewise.
911 * gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
912 * lib/gdb.exp (is_address_zero_readable): New proc.
914 2014-08-09 Yao Qi <yao@codesourcery.com>
917 * gdb.mi/mi-var-display.exp: Make test messages unique.
919 2014-08-04 Tom Tromey <tromey@redhat.com>
921 * gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
924 2014-08-04 Tom Tromey <tromey@redhat.com>
926 * gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
929 2014-08-01 Joel Brobecker <brobecker@adacore.com>
931 * gdb.base/vla-datatypes.c (vla_factory): Add new variable
932 inner_vla_struct_object_size.
933 * gdb.base/vla-datatypes.exp: Adjust last test, and mark it
936 2014-07-30 Pedro Alves <palves@redhat.com>
938 * gdb.threads/signal-command-handle-nopass.exp (test): Add
941 2014-07-29 Yao Qi <yao@codesourcery.com>
944 * gdb.base/until-nodebug.exp: New.
946 2014-07-28 Doug Evans <xdje42@gmail.com>
949 * gdb.guile/scm-parameter.exp: Add tests for trying to create
950 previously existing parameter, and previously ambiguously spelled
953 2014-07-28 Will Newton <will.newton@linaro.org>
955 * gdb.base/varargs.exp: Remove KFAILs for ARM.
957 2014-07-26 Ludovic Courtès <ludo@gnu.org>
958 Doug Evans <xdje42@gmail.com>
961 * gdb.guile/types-module.exp: Add tests for wrong type arguments.
963 2014-07-25 Pedro Alves <palves@redhat.com>
965 * gdb.threads/signal-command-handle-nopass.c: New file.
966 * gdb.threads/signal-command-handle-nopass.exp: New file.
967 * gdb.threads/signal-command-multiple-signals-pending.c: New file.
968 * gdb.threads/signal-command-multiple-signals-pending.exp: New file.
969 * gdb.threads/signal-delivered-right-thread.c: New file.
970 * gdb.threads/signal-delivered-right-thread.exp: New file.
972 2014-07-25 Pedro Alves <palves@redhat.com>
974 * gdb.base/double-prompt-target-event-error.exp
975 (cancel_pagination_in_target_event): Remove '-notransfer <return>'
977 (cancel_pagination_in_target_event): Rework double prompt
979 * gdb.base/paginate-after-ctrl-c-running.exp
980 (test_ctrlc_while_target_running_paginates): Remove '-notransfer
982 * gdb.base/paginate-bg-execution.exp
983 (test_bg_execution_pagination_return)
984 (test_bg_execution_pagination_cancel): Remove '-notransfer
986 * gdb.base/paginate-execution-startup.exp
987 (test_fg_execution_pagination_return)
988 (test_fg_execution_pagination_cancel): Remove '-notransfer
990 * gdb.base/paginate-inferior-exit.exp
991 (test_paginate_inferior_exited): Remove '-notransfer <return>'
993 * lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
994 * lib/gdb.exp (pagination_prompt): Run text through
996 (gdb_test_multiple): Match $pagination_prompt instead of
998 (string_to_regexp): Move to lib/gdb-utils.exp.
1000 2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1002 * gdb.arch/amd64-entry-value-paramref.S: New file.
1003 * gdb.arch/amd64-entry-value-paramref.cc: New file.
1004 * gdb.arch/amd64-entry-value-paramref.exp: New file.
1005 * gdb.arch/amd64-optimout-repeat.S: New file.
1006 * gdb.arch/amd64-optimout-repeat.c: New file.
1007 * gdb.arch/amd64-optimout-repeat.exp: New file.
1009 2014-07-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1012 * gdb.base/statistics.exp: New file.
1014 2014-07-17 Doug Evans <dje@google.com>
1017 * gdb.base/maint.exp: Update testing of per-command stats.
1019 2014-07-16 Pedro Alves <palves@redhat.com>
1021 * gdb.trace/tfile.c: Include unistd.h and stdint.h.
1022 (start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
1023 (tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
1024 (tfile_write_buf): New functions.
1025 (add_memory_block): Rewrite using the above.
1026 (adjust_function_address): New function.
1027 (FUNCTION_ADDRESS): New macro.
1028 (write_basic_trace_file): Remove short_x local, and use
1029 tfile_write_16. Change type of func_addr local to unsigned long
1030 long. Use FUNCTION_ADDRESS instead of handling the Thumb bit
1031 here. Cast argument of add_memory_block to char pointer.
1032 (write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS.
1033 (main): Remove parameters.
1034 * gdb.trace/tfile.exp: Remove nowarnings.
1036 2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
1038 * gdb.base/debug-expr.exp: Test string evaluation with
1039 "debug expression" on.
1041 2014-07-15 Pedro Alves <palves@redhat.com>
1043 * gdb.base/reread.exp: Use clean_restart.
1045 2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
1047 * gdb.arch/avr-flash-qualifer.c: New.
1048 * gdb.arch/avr-flash-qualifer.exp: New.
1050 2014-07-14 Pedro Alves <palves@redhat.com>
1052 * gdb.base/paginate-after-ctrl-c-running.c: New file.
1053 * gdb.base/paginate-after-ctrl-c-running.exp: New file.
1055 2014-07-14 Pedro Alves <palves@redhat.com>
1057 * gdb.base/double-prompt-target-event-error.c: New file.
1058 * gdb.base/double-prompt-target-event-error.exp: New file.
1060 2014-07-14 Pedro Alves <palves@redhat.com>
1063 * gdb.base/paginate-inferior-exit.c: New file.
1064 * gdb.base/paginate-inferior-exit.exp: New file.
1066 2014-07-14 Pedro Alves <palves@redhat.com>
1069 * gdb.base/paginate-bg-execution.c: New file.
1070 * gdb.base/paginate-bg-execution.exp: New file.
1072 2014-07-14 Pedro Alves <palves@redhat.com>
1075 * gdb.base/paginate-execution-startup.c: New file.
1076 * gdb.base/paginate-execution-startup.exp: New file.
1077 * lib/gdb.exp (pagination_prompt): New global.
1078 (default_gdb_spawn): New procedure, factored out from
1080 (default_gdb_start): Adjust to call default_gdb_spawn.
1081 (gdb_spawn): New procedure.
1083 2014-07-14 Pedro Alves <palves@redhat.com>
1085 * lib/gdb.exp (gdb_assert): New procedure.
1086 * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
1088 2014-07-14 Pedro Alves <palves@redhat.com>
1090 * gdb.base/execution-termios.c: New file.
1091 * gdb.base/execution-termios.exp: New file.
1093 2014-07-14 Tom Tromey <tromey@redhat.com>
1095 * gdb.cp/vla-cxx.cc: New file.
1096 * gdb.cp/vla-cxx.exp: New file.
1098 2014-07-14 Tom Tromey <tromey@redhat.com>
1100 * gdb.reverse/rerun-prec.c: New file.
1101 * gdb.reverse/rerun-prec.exp: New file.
1103 2014-07-12 Maciej W. Rozycki <macro@mips.com>
1104 Maciej W. Rozycki <macro@codesourcery.com>
1106 * lib/gdb-utils.exp: New file.
1107 * lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
1108 inline `gdb_init_command' processing.
1109 (gdb_start_cmd): Likewise.
1110 * lib/mi-support.exp (mi_run_cmd): Likewise.
1111 * README: Document `gdb_init_command' and `gdb_init_commands'.
1113 2014-07-11 Jan Kratochvil <jan.kratochvil@redhat.com>
1115 Fix false FAIL running under a very long directory name.
1116 * gdb.base/argv0-symlink.exp: Add "set print repeats 10000"
1117 and "set print elements 10000". Twice.
1119 2014-07-11 Yao Qi <yao@codesourcery.com>
1121 * gdb.base/exprs.exp: "set print symbol off".
1123 2014-07-11 Pedro Alves <palves@redhat.com>
1125 * gdb.threads/kill.c: New file.
1126 * gdb.threads/kill.exp: New file.
1128 2014-07-10 Yao Qi <yao@codesourcery.com>
1130 * gdb.trace/tfile.c (write_basic_trace_file)
1131 [__thumb__||__thumb2__]: Clear the Thumb bit of the function
1132 address written to trace file.
1134 2014-07-09 Pedro Alves <palves@redhat.com>
1136 * gdb.base/attach-wait-input.exp: New file.
1137 * gdb.base/attach-wait-input.c: New file.
1139 2014-07-09 Andrew Burgess <andrew.burgess@embecosm.com>
1141 * gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
1142 setting up test structures.
1143 (main): Call new test function.
1144 * gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
1145 test function, continue into test function and walk test
1148 2014-07-02 Yao Qi <yao@codesourcery.com>
1150 * gdb.trace/entry-values.c: Define labels 'foo_start' and
1151 'bar_start' at the beginning of functions 'foo' and 'bar'
1153 * gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
1154 instead of 'foo' and 'bar'.
1156 2014-07-08 Markus Metzger <markus.t.metzger@intel.com>
1158 * gdb.btrace/segv.exp: New.
1159 * gdb.btrace/segv.c: New.
1161 2014-07-02 Luis Machado <lgustavo@codesourcery.com>
1163 * gdb.trace/entry-values.exp: Handle powerpc-specific branch
1166 2014-06-30 Mark Wielaard <mjw@redhat.com>
1168 * gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
1169 vulture, vilify, villar): New volatile array constants.
1170 (vindictive, vegetation): New const volatile array constants.
1171 * gdb.base/volatile.exp: Test volatile and const volatile array
1174 2014-06-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
1176 * gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
1177 target lacks support for awatch, rwatch, or hbreak.
1179 2014-06-27 Yao Qi <yao@codesourcery.com>
1181 * gdb.multi/dummy-frame-restore.exp: New.
1182 * gdb.multi/dummy-frame-restore.c: New.
1184 2014-06-25 Markus Metzger <markus.t.metzger@intel.com>
1186 * gdb.btrace/gcore.exp: New.
1188 2014-06-23 Pedro Alves <palves@redhat.com>
1190 * gdb.base/watchpoint-reuse-slot.c: New file.
1191 * gdb.base/watchpoint-reuse-slot.exp: New file.
1193 2014-06-23 Siva Chandra Reddy <sivachandra@google.com>
1195 * gdb.python/py-xmethods.exp: Use "progspace" instead of the
1196 progspace's filename in 'info', 'enable' and 'disable' command
1199 2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
1201 * gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
1202 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
1203 * gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
1205 2014-06-20 Gary Benson <gbenson@redhat.com>
1207 * gdb.arch/i386-avx.exp: Fix include file location.
1208 * gdb.arch/i386-sse.exp: Likewise.
1210 2014-06-19 Iain Buclaw <ibuclaw@gdcproject.org>
1212 * gdb.dlang/expression.exp: New file.
1214 2014-06-19 Pedro Alves <palves@redhat.com>
1216 * gdb.threads/thread-execl.exp (do_test): New procedure, factored
1218 (top level): ... here. Iterate running tests under different
1219 scheduler-locking settings.
1221 2014-06-18 Luis Machado <lgustavo@codesourcery.com>
1223 * gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
1224 to DW_FORM_addr and use non-zero addresses.
1226 2014-06-18 Siva Chandra Reddy <sivachandra@google.com>
1229 * gdb.python/py-xmethods.cc: Add global function call counters and
1230 increment them in their respective functions. Remove "cout"
1232 * gdb.python/py-xmethods.exp: Make tests check the global function
1233 call counters instead of depending on inferior IO.
1235 2014-06-18 Don Breazeal <donb@codesourcery.com>
1237 * gdb.base/foll-fork.exp (default_fork_parent_follow):
1239 (explicit_fork_parent_follow): Deleted procedure.
1240 (explicit_fork_child_follow): Deleted procedure.
1241 (test_follow_fork): New procedure.
1242 (do_fork_tests): Replace calls to deleted procedures with
1243 calls to test_follow_fork and reset GDB for subsequent
1246 2014-06-17 Yao Qi <yao@codesourcery.com>
1248 * gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
1251 2014-06-17 Luis Machado <lgustavo@codesourcery.com>
1253 * gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
1254 Initialize ptr and S explicitly.
1255 (skip_type_update_when_not_use_rtti_test): Likewise.
1257 2014-06-16 Keith Seitz <keiths@redhat.com>
1260 * gdb.mi/mi-var-cmd.exp: Add test for -var-update before
1261 the inferior is started.
1263 2014-06-16 Pedro Alves <palves@redhat.com>
1265 * gdb.base/break-main-file-remove-fail.c: New file.
1266 * gdb.base/break-main-file-remove-fail.exp: New file.
1267 * gdb.base/break-unload-file.exp: Use build_executable instead of
1268 prepare_for_testing.
1269 (test_break): New parameter "initial_load". Handle it.
1270 (top level): Add initial_load cmdline/file axis.
1272 2014-06-12 Tom Tromey <tromey@redhat.com>
1274 * gdb.base/completion.exp: Don't use directory name in test.
1276 2014-06-09 Gary Benson <gbenson@redhat.com>
1278 * gdb.base/sigall.c [Functions to send signals]: Reorder to
1279 separate the always-available ANSI-standard signals from the
1280 signals that require checking.
1282 * gdb.reverse/sigall-reverse.c [Functions to send signals]:
1286 2014-06-07 Keith Seitz <keiths@redhat.com>
1290 * gdb.cp/var-tag.cc: New file.
1291 * gdb.cp/var-tag.exp: New file.
1292 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
1293 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
1294 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
1295 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
1297 2014-06-06 Doug Evans <xdje42@gmail.com>
1299 * gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3.
1301 2014-06-06 Pedro Alves <palves@redhat.com>
1303 * gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step)
1304 in target debug output instead of looking at RSP packets,
1305 disabling the test on any target that uses hardware stepping.
1308 2014-06-06 Pedro Alves <palves@redhat.com>
1310 * gdb.base/break-unload-file.exp: Fix typo.
1312 2014-06-06 Yao Qi <yao@codesourcery.com>
1314 * gdb.base/jit.exp (one_jit_test): Restrict the pattern
1315 from "jit_function" to "^jit_function".
1317 2014-06-06 Yao Qi <yao@codesourcery.com>
1319 * gdb.base/async.c (foo): Add one statement.
1320 * gdb.base/async.exp: Get the next instruction address and
1321 match the output of "nexti" by instruction address. Match
1322 the hex address in the output of "finish".
1324 2014-06-06 Gary Benson <gbenson@redhat.com>
1326 * gdb.base/call-signals.c: Remove preprocessor conditionals
1327 for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE,
1328 SIGSEGV and SIGTERM.
1329 * gdb.base/sigall.c: Likewise.
1330 * gdb.base/unwindonsignal.c: Likewise.
1331 * gdb.reverse/sigall-reverse.c: Likewise.
1333 2014-06-06 Yao Qi <yao@codesourcery.com>
1335 * gdb.base/hbreak-unmapped.exp: Read memory at address 0. If
1336 readable, skip the test.
1338 2014-06-06 Yao Qi <yao@codesourcery.com>
1340 * gdb.threads/staticthreads.c (thread_function): Move the line
1341 setting breakpoint on forward.
1342 * gdb.threads/staticthreads.exp: Update comments.
1344 2014-06-05 Ludovic Courtès <ludo@gnu.org>
1346 * gdb.guile/scm-value.exp (test_value_in_inferior): Add test
1347 "history-append! type error".
1349 2014-06-05 Simon Marchi <simon.marchi@ericsson.com>
1351 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix
1352 erroneous dprintf expected input.
1354 2014-06-04 Doug Evans <xdje42@gmail.com>
1356 * gdb.guile/scm-generics.exp: Delete.
1358 2014-06-04 Doug Evans <xdje42@gmail.com>
1360 * gdb.guile/scm-breakpoint.exp: Update.
1361 Add tests for breakpoint registration.
1363 2014-06-04 Tom Tromey <tromey@redhat.com>
1365 * gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
1367 * gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
1368 inner_vla_struct, vla_union types. Initialize objects of those
1369 types and compute their sizes.
1371 2014-06-04 Nathan Sidwell <nathan@codesourcery.com>
1372 Hui Zhu <hui@codesourcery.com>
1374 * gdb.base/fileio.exp: Add test for shell not available as well as
1376 * gdb.base/fileio.c (test_system): Check for shell twice.
1378 2014-06-04 Yao Qi <yao@codesourcery.com>
1380 * gdb.base/auto-connect-native-target.exp: Remove redundant
1381 space from the regexp pattern.
1383 2014-06-04 Yao Qi <yao@codesourcery.com>
1385 * gdb.base/default.exp: Replace "child" with "native" in
1388 2014-06-03 Siva Chandra Reddy <sivachandra@google.com>
1390 * gdb.python/py-xmethods.cc: New testcase to test xmethods.
1391 * gdb.python/py-xmethods.exp: New tests to test xmethods.
1392 * gdb.python/py-xmethods.py: Python script supporting the
1393 new testcase and tests.
1395 2014-06-03 Joel Brobecker <brobecker@adacore.com>
1396 Pedro Alves <palves@redhat.com>
1398 PR breakpoints/17000
1399 * gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
1400 * gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.
1402 2014-06-03 Brad Mouring <bmouring@ni.com> (tiny patch)
1404 * gdb.base/subst.exp: Add tests to verify partial path matching
1407 2014-06-03 Pedro Alves <palves@redhat.com>
1409 * gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote
1410 target that doesn't use software single-stepping.
1412 2014-06-03 Pedro Alves <palves@redhat.com>
1414 PR breakpoints/17000
1415 * gdb.base/sss-bp-on-user-bp-2.c: New file.
1416 * gdb.base/sss-bp-on-user-bp-2.exp: New file.
1418 2014-06-02 Doug Evans <xdje42@gmail.com>
1420 * gdb.guile/scm-parameter.exp: New file.
1422 2014-06-02 Doug Evans <xdje42@gmail.com>
1424 * gdb.guile/scm-cmd.c: New file.
1425 * gdb.guile/scm-cmd.exp: New file.
1427 2014-06-02 Doug Evans <xdje42@gmail.com>
1429 * gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace
1430 pretty-printer lookup.
1431 * gdb.guile/scm-pretty-print.scm (pp_s-printer): New function.
1432 (make-pp_s-printer): Call it.
1433 (make-pretty-printer-from-dict): New function.
1434 (lookup-pretty-printer-maker-from-dict): New function.
1435 (*pretty-printer*): Simplify.
1436 (make-objfile-pp_s-printer): New function.
1437 (install-objfile-pretty-printers!): New function.
1438 (make-progspace-pp_s-printer): New function.
1439 (install-progspace-pretty-printers!): New function.
1440 * gdb.guile/scm-progspace.c: New file.
1441 * gdb.guile/scm-progspace.exp: New file.
1443 2014-06-02 Pedro Alves <palves@redhat.com>
1445 * gdb.base/dprintf-bp-same-addr.c: New file.
1446 * gdb.base/dprintf-bp-same-addr.exp: New file.
1448 2014-06-02 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
1450 * gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase.
1451 * gdb.arch/powerpc-power.s: Likewise.
1453 2014-06-02 Joel Brobecker <brobecker@adacore.com>
1455 * gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT.
1457 2014-06-01 Yao Qi <yao@codesourcery.com>
1459 * gdb.base/watchpoint.exp (test_watch_location): Check null
1460 pointer can be dereferenced. If not, do the test, otherwise
1463 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
1465 * gdb.arch/amd64-invalid-stack-middle.exp: Update expected
1467 * gdb.arch/amd64-invalid-stack-top.exp: Likewise.
1469 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
1471 * gdb.arch/amd64-invalid-stack-middle.S: New file.
1472 * gdb.arch/amd64-invalid-stack-middle.c: New file.
1473 * gdb.arch/amd64-invalid-stack-middle.exp: New file.
1474 * gdb.arch/amd64-invalid-stack-top.c: New file.
1475 * gdb.arch/amd64-invalid-stack-top.exp: New file.
1477 2014-05-30 Pedro Alves <palves@redhat.com>
1479 PR breakpoints/17000
1480 * gdb.base/sss-bp-on-user-bp.c: New file.
1481 * gdb.base/sss-bp-on-user-bp.exp: New file.
1483 2014-05-30 David Blaikie <dblaikie@gmail.com>
1485 * gdb.opt/inline-break.c: Fix clang compatibility by specifying
1486 gnu_inline semantics via attribute.
1487 * gdb.opt/inline-break.exp: Remove -std=c89 now that the test
1488 source explicitly specifies the required semantics.
1490 2014-05-30 Maciej W. Rozycki <macro@codesourcery.com>
1492 * gdb.reverse/sigall-reverse.exp: Fix a typo.
1494 2014-05-29 Pedro Alves <palves@redhat.com>
1495 Tom Tromey <tromey@redhat.com>
1497 * gdb.base/async-shell.exp: Don't enable target-async.
1498 * gdb.base/async.exp
1499 * gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
1501 (top level): Don't test with "target-async".
1502 * gdb.base/dprintf-non-stop.exp: Don't enable target-async.
1503 * gdb.base/gdb-sigterm.exp: Don't test with "target-async".
1504 * gdb.base/inferior-died.exp: Don't enable target-async.
1505 * gdb.base/interrupt-noterm.exp: Likewise.
1506 * gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
1507 * gdb.mi/mi-nonstop-exit.exp: Likewise.
1508 * gdb.mi/mi-nonstop.exp: Likewise.
1509 * gdb.mi/mi-ns-stale-regcache.exp: Likewise.
1510 * gdb.mi/mi-nsintrall.exp: Likewise.
1511 * gdb.mi/mi-nsmoribund.exp: Likewise.
1512 * gdb.mi/mi-nsthrexec.exp: Likewise.
1513 * gdb.mi/mi-watch-nonstop.exp: Likewise.
1514 * gdb.multi/watchpoint-multi.exp: Adjust comment.
1515 * gdb.python/py-evsignal.exp: Don't enable target-async.
1516 * gdb.python/py-evthreads.exp: Likewise.
1517 * gdb.python/py-prompt.exp: Likewise.
1518 * gdb.reverse/break-precsave.exp: Don't test with "target-async".
1519 * gdb.server/solib-list.exp: Don't enable target-async.
1520 * gdb.threads/thread-specific-bp.exp: Likewise.
1521 * lib/mi-support.exp: Adjust to use mi-async.
1523 2014-05-29 Pedro Alves <palves@redhat.com>
1526 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
1527 reason, even in sync mode.
1529 2014-05-29 Pedro Alves <palves@redhat.com>
1530 Hui Zhu <hui@codesourcery.com>
1533 * gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
1534 * gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
1535 * gdb.mi/mi-condbreak-call-thr-state.c: New file.
1536 * gdb.mi/mi-condbreak-call-thr-state.exp: New file.
1538 2014-05-28 Joel Brobecker <brobecker@adacore.com>
1540 * config/monitor.exp (gdb_target_monitor): Replace use of
1541 "set remotebaud" by "set serial baud".
1543 2014-05-26 Andy Wingo <wingo@igalia.com>
1545 * gdb.guile/scm-breakpoint.exp:
1546 * gdb.guile/scm-gsmob.exp: Update to use plain old object
1547 properties instead of gdb-object-properties.
1549 2014-05-26 Yao Qi <yao@codesourcery.com>
1551 * gdb.server/no-thread-db.exp: Specify source file name
1552 explicitly when setting a breakpoint.
1554 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
1556 * gdb.btrace/vdso.c: New.
1557 * gdb.btrace/vdso.exp: New.
1559 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
1561 * gdb.base/gcore.exp (capture_command_output): Move ...
1562 * lib/gdb.exp (capture_command_output): ... here.
1564 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
1566 * gdb.btrace/data.exp: Test memory access during btrace replay.
1568 2014-05-22 Simon Marchi <simon.marchi@ericsson.com>
1570 * lib/mi-support.exp (mi_run_cmd_full): Add comments.
1572 2014-05-21 Pedro Alves <palves@redhat.com>
1575 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
1576 (top level): Test that output related to execution commands is
1577 sent to the console with CLI commands, but not with MI commands.
1578 Test that breakpoint events are always mirrored to the console.
1579 Also expect the new source line to be output after a "next" in
1580 async mode too. Make it a pass/fail test.
1581 * gdb.mi/mi-solib.exp: Test that the CLI solib event note is
1583 * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
1585 2014-05-21 Pedro Alves <palves@redhat.com>
1587 * gdb.base/list.exp (build_pattern, test_list): New procedures.
1588 Use them to test variations of "list" after reaching a breakpoint.
1589 * gdb.mi/mi-cli.exp (line_main_callme_2): New global.
1590 Test "list" with listsize 10 after reaching a breakpoint.
1591 * gdb.python/python.exp (decode_line current location line
1592 number): Adjust expected line number.
1594 2014-05-21 Simon Marchi <simon.marchi@ericsson.com>
1596 * lib/mi-support.exp (mi_run_cmd_full): Revert to original
1597 behavior for $args, pass it directly to "run".
1599 2014-05-21 Maciej W. Rozycki <macro@codesourcery.com>
1601 * lib/gdb.exp (default_gdb_init): Bump `match_max' up from
1604 2014-05-21 Pedro Alves <palves@redhat.com>
1606 * boards/gdbserver-base.exp (GDBFLAGS): Set to "set
1607 auto-connect-native-target off".
1608 * gdb.base/auto-connect-native-target.c: New file.
1609 * gdb.base/auto-connect-native-target.exp: New file.
1611 2014-05-21 Pedro Alves <palves@redhat.com>
1613 * gdb.base/default.exp: Test "target native" instead of "target
1616 2014-05-21 Mark Wielaard <mjw@redhat.com>
1618 * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.
1620 2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1622 Fix TLS access for -static -pthread.
1623 * gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
1624 <HAVE_TLS> (thread_function, main): Initialize it.
1625 * gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
1627 <$have_tls != "">: Check TLSVAR.
1629 2014-05-21 Pedro Alves <palves@redhat.com>
1631 * gdb.base/dcache-line-read-error.c: New.
1632 * gdb.base/dcache-line-read-error.exp: New.
1634 2014-05-20 Pedro Alves <palves@redhat.com>
1636 * gdb.base/compare-sections.c: New file.
1637 * gdb.base/compare-sections.exp: New file.
1639 2014-05-20 Pedro Alves <palves@redhat.com>
1641 * gdb.base/break-idempotent.c: New file.
1642 * gdb.base/break-idempotent.exp: New file.
1644 2014-05-20 Markus Metzger <markus.t.metzger@intel.com>
1646 * gdb.btrace/nohist.exp: New.
1648 2014-05-20 Yao Qi <yao@codesourcery.com>
1650 * lib/gdb.exp (gdb_init): Set timeout if test file is under
1651 gdb.reverse directory and gdb_reverse_timeout exists in board
1653 * README: Document gdb_reverse_timeout.
1655 2014-05-20 Yao Qi <yao@codesourcery.com>
1657 * lib/gdb.exp (default_gdb_init): Rename argument 'args' by
1658 'test_file_name'. Treat args as a string instead of a list.
1659 (gdb_init): Rename argument 'args' by 'test_file_name'.
1661 2014-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1663 * gdb.arch/powerpc-power.exp: New file.
1664 * gdb.arch/powerpc-power.s: New file.
1666 2014-05-16 Doug Evans <dje@google.com>
1668 * gdb.base/Makefile.in (EXECUTABLES): Add completion.
1669 * gdb.base/completion.exp: Check that all expected files exist
1670 before doing file completion.
1672 2014-05-16 Doug Evans <dje@google.com>
1674 * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
1676 (do_syscall_tests_without_xml): Update.
1678 2014-05-16 Pedro Alves <palves@redhat.com>
1680 * lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
1681 instead of "unknown output after running".
1683 2014-05-16 Yao Qi <yao@codesourcery.com>
1685 * gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host. Remove
1686 file1.txt from host at the end.
1687 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
1689 2014-05-15 Doug Evans <dje@google.com>
1691 * gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path.
1692 * gdb.dwarf2/fission-reread.exp: Set debug-file-directory before
1693 loading file. Add test for TU lookup.
1695 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
1697 * lib/mi-support.exp (mi_run_cmd_full): Set arguments by
1698 calling "-exec-arguments" or "set args" before running the
1701 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
1703 * lib/mi-support.exp (mi_expect_stop): Expect message for
1704 inferiors that exit with non-zero exit code.
1706 2014-05-14 Yao Qi <yao@codesourcery.com>
1708 * gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't
1709 match absolute path on remote host.
1710 (test_file_list_exec_source_files): Remove "/" from the
1713 2014-05-14 Yao Qi <yao@codesourcery.com>
1715 * boards/local-remote-host-notty.exp (${board}_file): New
1718 2014-05-07 Kyle McMartin <kyle@redhat.com>
1720 Pushed by Joel Brobecker <brobecker@adacore.com>.
1721 * gdb.arch/aarch64-atomic-inst.c: New file.
1722 * gdb.arch/aarch64-atomic-inst.exp: New file.
1724 2014-05-07 Yao Qi <yao@codesourcery.com>
1726 * gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int"
1727 in current context" too.
1729 2014-05-05 Keith Seitz <keiths@redhat.com>
1731 * gdb.linespec/ls-dollar.exp: Add test for linespec
1732 file:convenience_variable.
1734 2014-05-05 Yao Qi <yao@codesourcery.com>
1736 * gdb.trace/unavailable.exp (gdb_collect_args_test): Save
1737 traceframes into tfile and ctf trace files. Read data from
1738 trace file and test collected data.
1739 (gdb_collect_locals_test): Likewise.
1740 (gdb_unavailable_registers_test): Likewise.
1741 (gdb_unavailable_floats): Likewise.
1742 (gdb_collect_globals_test): Likewise.
1743 (top-level): Append "ctf" to trace_file_targets if GDB
1746 2014-05-05 Yao Qi <yao@codesourcery.com>
1748 * gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
1750 (gdb_collect_args_test_1): ... it. New proc.
1751 (gdb_collect_locals_test): Move some code to ...
1752 (gdb_collect_locals_test_1): ... it. New proc.
1753 (gdb_unavailable_registers_test): Move some code to ...
1754 (gdb_unavailable_registers_test_1): ... it. New proc.
1755 (gdb_unavailable_floats): Move some code to ...
1756 (gdb_unavailable_floats_1): ... it. New proc.
1758 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
1760 * gdb.arch/amd64-stap-optional-prefix.S (main): Add several
1761 probes to test for bitness recognition.
1762 * gdb.arch/amd64-stap-optional-prefix.exp
1763 (test_probe_value_without_reg): New procedure.
1764 Add code to test for different kinds of bitness.
1766 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
1768 PR breakpoints/16889
1769 * gdb.arch/amd64-stap-optional-prefix.S: New file.
1770 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
1772 2014-05-01 Pedro Alves <palves@redhat.com>
1774 * lib/gdb.exp (gdb_load): Extend comment. Skip calling
1775 gdb_file_cmd if no file is specified.
1776 * boards/native-extended-gdbserver.exp (gdb_load): Use the
1777 last_loaded_file to set the remote exec-file.
1779 2014-05-01 Pedro Alves <palves@redhat.com>
1781 * boards/local-remote-host.exp: New file.
1783 2014-05-01 Pedro Alves <palves@redhat.com>
1785 * boards/local-remote-host.exp: Rename to ...
1786 * boards/local-remote-host-notty.exp: ... this.
1788 2014-04-28 Joel Brobecker <brobecker@adacore.com>
1790 * gdb.ada/dyn_arrayidx: New testcase.
1792 2014-04-26 Yao Qi <yao@codesourcery.com>
1794 * gdb.dwarf2/dwz.exp: Compile main.c to object. Restart GDB
1795 and compute the length of function main. Save it in
1797 (Dwarf::assemble): Use $main_length instead of hard-coded 10.
1798 (top-level): Use gdb_compile to compile objects into
1799 executable and restart GDB. Remove invocation to
1800 prepare_for_testing.
1802 2014-04-25 Simon Marchi <simon.marchi@ericsson.com>
1803 Pedro Alves <palves@redhat.com>
1806 * gdb.multi/multi-attach.c: New file.
1807 * gdb.multi/multi-attach.exp: New file.
1809 2014-04-25 Pedro Alves <palves@redhat.com>
1811 * gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
1813 (top level): Test that "set remote conditional-breakpoints-packet
1814 off" works as intended.
1815 * gdb.base/dprintf.exp: Test that "set remote
1816 breakpoint-commands-packet off" works as intended.
1817 * gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
1819 (top level): Call it.
1820 * gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
1821 remote fast-tracepoints-packet off" works as intended.
1822 * gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
1823 * lib/gdb.exp (gdb_is_target_remote): ... here.
1825 2014-04-24 David Blaikie <dblaikie@gmail.com>
1827 * gdb.base/catch-syscall.c: Make unreferenced statics non-static to
1828 ensure clang would not discard them.
1829 * gdb.base/gdbvars.c: Ditto.
1830 * gdb.base/memattr.c: Ditto.
1831 * gdb.base/whatis.c: Ditto.
1832 * gdb.python/py-prettyprint.c: Ditto.
1833 * gdb.trace/actions.c: Ditto.
1834 * gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
1835 ensure clang would not discard it.
1837 2014-04-24 David Blaikie <dblaikie@gmail.com>
1839 * gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
1840 clang to emit the full definition of type required by the test
1841 * gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
1843 2014-04-24 David Blaikie <dblaikie@gmail.com>
1845 * gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to
1846 coax Clang into emitting the definition of the type.
1847 * gdb.cp/pr10728-x.h (y): Ditto.
1848 * gdb.cp/pr10728-y.cc (y): Ditto.
1850 2014-04-24 David Blaikie <dblaikie@gmail.com>
1852 * gdb.base/label.exp: XFAIL label related tests under Clang.
1853 * gdb.cp/cplabel.exp: Ditto.
1854 * gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL
1855 under Clang those using labels.
1857 2014-04-25 Yao Qi <yao@codesourcery.com>
1859 * gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
1861 * gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
1862 partial_label and double_label.
1864 2014-04-24 David Blaikie <dblaikie@gmail.com>
1866 * gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.
1868 2014-04-24 David Blaikie <dblaikie@gmail.com>
1870 * gdb.cp/cpexprs.cc: Move braces to the same line as the start
1871 of the function to work across GCC and Clang.
1872 * gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
1873 pointer types (const void ** const V void **).
1875 2014-04-24 Michael Sturm <michael.sturm@mintel.com>
1876 Walfred Tedeschi <walfred.tedeschi@intel.com>
1878 * Makefile.in (EXECUTABLES): Added i386-avx512.
1879 * gdb.arch/i386-avx512.c: New file.
1880 * gdb.arch/i386-avx512.exp: Likewise.
1882 2014-04-23 Keith Seitz <keiths@redhat.com>
1884 * lib/mi-support.exp (mi_list_breakpoints): Delete.
1885 (mi_make_breakpoint_table): New procedure.
1886 (mi_create_breakpoint): Use mi_make_breakpoint
1887 and return the result.
1888 (mi_make_breakpoint): New procedure.
1889 (mi_build_kv_pairs): New procedure.
1891 * gdb.mi/mi-break.exp: Remove unused globals,
1892 update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
1893 All callers updated.
1894 * gdb.mi/mi-dprintf.exp: Use variable to track command
1896 Update all callers of mi_create_breakpoint and use
1897 mi_make_breakpoint_table.
1898 Remove any unused global variables.
1899 * gdb.mi/mi-nonstop.exp: Likewise.
1900 * gdb.mi/mi-nsintrall.exp: Likewise.
1901 * gdb.mi/mi-nsmoribund.exp: Likewise.
1902 * gdb.mi/mi-nsthrexec.exp: Likewise.
1903 * gdb.mi/mi-reverse.exp: Likewise.
1904 * gdb.mi/mi-simplerun.exp: Likewise.
1905 * gdb.mi/mi-stepn.exp: Likewise.
1906 * gdb.mi/mi-syn-frame.exp: Likewise.
1907 * gdb.mi/mi-until.exp: Likewise.
1908 * gdb.mi/mi-var-cp.exp: Likewise.
1909 * gdb.mi/mi-var-display.exp: Likewise.
1910 * gdb.mi/mi2-amd64-entry-value.exp: Likewise.
1911 * gdb.mi/mi2-var-child.exp: Likewise.
1912 * gdb.mi/mi-vla-c99.exp: Likewise.
1913 * lib/mi-support.exp: Likewise.
1915 From Ian Lance Taylor <iant@cygnus.com>:
1916 * lib/gdb.exp (parse_args): New procedure.
1918 2014-04-23 Pedro Alves <palves@redhat.com>
1920 * gdb.base/break-unload-file.c: New file.
1921 * gdb.base/break-unload-file.exp: New file.
1922 * gdb.base/sym-file-lib.c (baz): New function.
1923 * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
1925 (load): Store the segment's mapped size.
1926 (unload): New function.
1927 (unload_shlib): New function.
1928 * gdb.base/sym-file-loader.h (unload_shlib): New declaration.
1929 * gdb.base/sym-file-main.c (main): Unload, and reload the library,
1930 set a breakpoint at baz, and call it.
1931 * gdb.base/sym-file.exp: New tests for stale breakpoint
1934 2014-04-23 Pedro Alves <palves@redhat.com>
1936 * gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
1937 * gdb.base/hbreak-in-shr-unsupported.c: New file.
1938 * gdb.base/hbreak-in-shr-unsupported.exp: New file.
1939 * gdb.base/hbreak-unmapped.c: New file.
1940 * gdb.base/hbreak-unmapped.exp: New file.
1941 * gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
1942 * lib/gdb.exp (gdb_is_target_remote): ... here.
1944 2014-04-22 Pedro Alves <palves@redhat.com>
1946 * gdb.base/consecutive-step-over.c: New file.
1947 * gdb.base/consecutive-step-over.exp: New file.
1949 2014-04-22 Pedro Alves <palves@redhat.com>
1951 * lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
1952 instead of send_gdb/gdb_expect.
1954 2014-04-22 Yao Qi <yao@codesourcery.com>
1956 * lib/trace-support.exp (generate_tracefile): New procedure.
1957 * gdb.trace/tfile.exp: Skip the test if generate_tracefile
1959 * gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
1960 if generate_tracefile returns 1.
1962 2014-04-18 Tom Tromey <palves@redhat.com>
1963 Pedro alves <tromey@redhat.com>
1966 * gdb.opt/inline-bt.exp: Test backtracing from an inline function
1967 with a backtrace limit.
1968 * gdb.python/py-frame-inline.exp: Test running to an inline
1969 function with a backtrace limit, and printing the newest frame.
1970 * gdb.python/py-frame-inline.c (main): Call f.
1972 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
1974 * gdb.java/jnpe.exp: Drop srcdir from untested path.
1976 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
1978 * lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc):
1979 Drop prefix from unsupported source file path.
1981 2014-04-17 Yao Qi <yao@codesourcery.com>
1983 * lib/gdb.exp (with_target_charset): New proc.
1984 * gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
1985 with_target_charset.
1986 (test_print_strings): Likewise.
1987 (test_repeat_bytes): Likewise.
1988 * gdb.base/setvar.exp: Set target-charset to ASCII temporarily
1991 2014-04-16 Keith Seitz <keiths@redhat.com>
1994 * gdb.dwarf2/corrupt.c: New file.
1995 * gdb.dwarf2/corrupt.exp: New file.
1997 2014-04-16 Keith Seitz <keiths@redhat.com>
2000 * gdb.cp/namelessclass.cc: New file.
2001 * gdb.cp/namelessclass.exp: New file.
2002 * gdb.cp/namelessclass.S: New file.
2004 2014-04-16 Doug Evans <dje@google.com>
2006 * lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
2008 (gdbserver_default_get_comm_port): New function.
2009 (gdbserver_start): Check if board file provided
2010 "gdbserver,get_comm_port" and use it if so.
2011 * boards/native-stdio-gdbserver.exp (sockethost): Set to "".
2012 (gdb,socketport): Set to "stdio".
2013 (gdbserver,get_comm_port): Set to ${board}_get_comm_port.
2014 (stdio_gdbserver_template): Delete.
2015 (${board}_get_remote_address): Update.
2016 (${board}_build_remote_cmd): Delete.
2017 (${board}_get_comm_port): New function.
2018 (${board}_spawn): Update.
2019 * boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
2021 (${board}_get_remote_address): Update.
2022 (${board}_get_comm_port): New function.
2024 2014-04-16 Andrew Burgess <aburgess@broadcom.com>
2026 * gdb.base/memattr.exp: Improve regexps to handle memory regions
2027 appearing in any order.
2029 2014-04-15 Doug Evans <dje@google.com>
2031 * gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference
2032 uninitialized value of "description".
2034 2014-04-15 Keith Seitz <keiths@redhat.com>
2036 * gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing):
2037 Remove unused globals.
2038 (test_running_the_program): Likewise.
2039 (test_controlled_execution): Likewise.
2040 (test_controlling_breakpoints): Likewise.
2041 (test_program_termination): Likewise.
2043 2014-04-15 Keith Seitz <keiths@redhat.com>
2045 * gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove
2047 (test_rbreak_creation_and_listing): Likewise.
2048 (test_ignore_count): Likewise.
2049 (test_error): Likewise.
2051 2014-04-15 Pedro Alves <palves@redhat.com>
2053 * gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
2054 <ansidecl.h>, <elf/common.h> and <elf/external.h> to
2056 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
2057 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
2058 to sym-file-loader.c.
2059 (struct library): Forward declare.
2060 (load_shlib, lookup_function): Change prototypes.
2061 (find_shstrtab, find_strtab, find_shdr, find_symtab)
2062 (translate_offset): Remove declarations.
2063 (get_text_addr): New declaration.
2064 * gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
2065 <ansidecl.h>, <elf/common.h> and <elf/external.h> here from
2067 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
2068 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
2069 here from sym-file-loader.h.
2070 (struct library): New structure.
2071 (load_shlib, lookup_function): Change prototypes and adjust to
2072 work with a struct library.
2073 (find_shstrtab, find_strtab, find_shdr, find_symtab)
2074 (translate_offset): Make static.
2075 (get_text_addr): New function.
2076 * gdb.base/sym-file-main.c (main): Adjust to new loader interface.
2078 2014-04-15 Pedro Alves <palves@redhat.com>
2080 * gdb.base/sym-file-loader.c: Fix typo. SELF_LINK, not SELK_LINK.
2082 2014-04-15 Pedro Alves <palves@redhat.com>
2084 * gdb.base/sym-file-loader.c: Include <limits.h>.
2085 (SELF_LINK): New define.
2086 (get_origin): New function.
2087 (load_shlib): Use it.
2088 * gdb.base/sym-file.exp: Don't early return if the target is
2089 remote. Use runto_main, and issue fail is that fails. Use
2091 (shlib_name): Delete.
2092 (lib_so, lib_syms, lib_dlopen): New globals. Use them throughout.
2094 2014-04-15 Pedro Alves <palves@redhat.com>
2096 * gdb.base/sym-file.exp: Remove regex characters from test
2097 message. Don't refer to breakpoint numbers in test messages.
2099 2014-04-14 Keith Seitz <keiths@redhat.com>
2102 * gdb.cp/var-tag.cc: New file.
2103 * gdb.cp/var-tag.exp: New file.
2104 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
2105 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
2106 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
2107 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
2109 2014-04-14 Tom Tromey <tromey@redhat.com>
2111 * gdb.cp/classes.exp (test_enums): Handle underlying type.
2112 * gdb.dwarf2/enum-type.exp: Add test for enum with underlying
2114 * gdb.cp/enum-class.exp: New file.
2115 * gdb.cp/enum-class.cc: New file.
2117 2014-04-14 Tom Tromey <tromey@redhat.com>
2119 * gdb.dwarf2/enum-type.exp: New file.
2121 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
2123 * gdb.mi/mi-vla-c99.exp: New file.
2124 * gdb.mi/vla.c: New file.
2126 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
2128 * gdb.base/vla-datatypes.c: New file.
2129 * gdb.base/vla-datatypes.exp: New file.
2131 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
2133 * gdb.base/vla-ptr.c: New file.
2134 * gdb.base/vla-ptr.exp: New file.
2136 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
2138 * gdb.dwarf2/count.exp: New file.
2140 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
2142 * gdb.base/vla-sideeffect.c: New file.
2143 * gdb.base/vla-sideeffect.exp: New file.
2145 2014-04-14 David Blaikie <dblaikie@gmail.com>
2147 * gdb.mi/non-stop.c: Add return value for non-void function return
2149 * gdb.threads/staticthreads.c: Ditto.
2151 2014-04-12 Siva Chandra Reddy <sivachandra@google.com>
2152 Doug Evans <xdje42@gmail.com>
2154 * gdb.guile/scm-value.c: Improve test case.
2155 * gdb.guile/scm-value.exp: Add new test.
2157 2014-04-11 David Blaikie <dblaikie@gmail.com>
2159 * gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to
2160 override Clang's default.
2162 2014-04-11 Joel Brobecker <brobecker@adacore.com>
2164 Revert the following changes (regressions):
2166 * gdb.base/vla-sideeffect.c: New file.
2167 * gdb.base/vla-sideeffect.exp: New file.
2169 * gdb.dwarf2/count.exp: New file.
2171 * gdb.base/vla-multi.c: New file.
2172 * gdb.base/vla-multi.exp: New file.
2174 * gdb.base/vla-ptr.c: New file.
2175 * gdb.base/vla-ptr.exp: New file.
2177 * gdb.base/vla-datatypes.c: New file.
2178 * gdb.base/vla-datatypes.exp: New file.
2180 * gdb.mi/mi-vla-c99.exp: New file.
2181 * gdb.mi/vla.c: New file.
2183 2014-04-11 Keith Seitz <keiths@redhat.com>
2186 * gdb.cp/cpsizeof.exp: New file.
2187 * gdb.cp/cpsizeof.cc: New file.
2189 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
2191 * gdb.mi/mi-vla-c99.exp: New file.
2192 * gdb.mi/vla.c: New file.
2194 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
2196 * gdb.base/vla-datatypes.c: New file.
2197 * gdb.base/vla-datatypes.exp: New file.
2199 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
2201 * gdb.base/vla-ptr.c: New file.
2202 * gdb.base/vla-ptr.exp: New file.
2204 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
2206 * gdb.base/vla-multi.c: New file.
2207 * gdb.base/vla-multi.exp: New file.
2209 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
2211 * gdb.dwarf2/count.exp: New file.
2213 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
2215 * gdb.base/vla-sideeffect.c: New file.
2216 * gdb.base/vla-sideeffect.exp: New file.
2218 2014-04-11 Yao Qi <yao@codesourcery.com>
2220 * gdb.base/completion.exp: Check file exists before running tests
2223 2014-04-10 Pedro Alves <palves@redhat.com>
2225 * gdb.base/cond-eval-mode.c: New file.
2226 * gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust
2227 prepare_for_testing to build the new file. Check result of
2229 (test_break, test_watch): New procedures.
2230 (top level): Use them.
2232 2014-04-08 Pierre Muller <muller@sourceware.org>
2234 * gdb.base/printcmds.exp (test_artificial_arrays): Disable
2235 Ctrl-V use for mingw hosts.
2237 2014-04-07 Siva Chandra Reddy <sivachandra@google.com>
2239 * gdb.python/py-value.c: Improve test case.
2240 * gdb.python/py-value.exp: Add new test.
2242 2014-04-07 David Blaikie <dblaikie@gmail.com>
2244 * lib/compiler.c: Identify the clang compiler.
2245 * lib/compiler.cc: Ditto.
2247 2014-04-03 Yao Qi <yao@codesourcery.com>
2249 * gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.
2251 2014-04-01 Anton Blanchard <anton@samba.org>
2253 * gdb.arch/ppc64-atomic-inst.exp: Use untested. Make test
2256 2014-04-01 Anton Blanchard <anton@samba.org>
2258 * gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile,
2259 prepare_for_testing.
2261 2014-04-01 Anton Blanchard <anton@samba.org>
2263 * gdb.arch/ppc64-atomic-inst.c: Remove.
2264 * gdb.arch/ppc64-atomic-inst.S: New file.
2265 * gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
2267 2014-03-31 Doug Evans <dje@google.com>
2269 * gdb.base/print-symbol-loading-lib.c: New file.
2270 * gdb.base/print-symbol-loading-main.c: New file.
2271 * gdb.base/print-symbol-loading.exp: New file.
2273 2014-03-31 Yao Qi <yao@codesourcery.com>
2275 * gdb.base/source-dir.exp: Allow ';' as a directory separator.
2277 2014-03-28 Joel Brobecker <brobecker@adacore.com>
2279 * gdb.ada/mi_dyn_arr: New testcase.
2281 2014-03-27 Doug Evans <dje@google.com>
2283 * gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug".
2285 2014-03-27 Yao Qi <yao@codesourcery.com>
2287 * lib/gdb.exp (can_single_step_to_signal_handler): Return zero
2288 if target is nios2-*-*.
2290 2014-03-26 Yao Qi <yao@codesourcery.com>
2292 * lib/gdb.exp (readline_is_used): New proc.
2293 * gdb.base/completion.exp: Move tests on command complete up.
2294 Skip the rest of tests if readline is not used.
2295 * gdb.ada/complete.exp: Skp the test if readline is not
2297 * gdb.base/filesym.exp: Likewise.
2298 * gdb.base/macscp.exp: Likewise.
2299 * gdb.base/readline-ask.exp: Likewise.
2300 * gdb.base/readline.exp: Likewise.
2301 * gdb.python/py-cmd.exp: Likewise.
2302 * gdb.trace/tfile.exp: Likewise.
2304 2014-03-26 Yao Qi <yao@codesourcery.com>
2306 * gdb.base/macscp.exp: Fix code format issues.
2308 2014-03-25 Ulrich Weigand <uweigand@de.ibm.com>
2310 * gdb.asm/asm-source.exp: Handle powerpc64le-* targets.
2311 * gdb.asm/powerpc64le.inc: New file.
2313 2014-03-25 Pedro Alves <palves@redhat.com>
2314 Doug Evans <dje@google.com>
2316 * gdb.base/source-execution.c: New file.
2317 * gdb.base/source-execution.exp: New file.
2318 * gdb.base/source-execution.gdb: New file.
2320 2014-03-24 Doug Evans <dje@google.com>
2322 * gdb.linespec/macro-relative.exp: Mark the test as unsupported if
2325 2014-03-24 Hui Zhu <hui@codesourcery.com>
2326 Pedro Alves <palves@redhat.com>
2328 PR breakpoints/16101
2329 * gdb.base/dprintf.exp: Use unsupported rather than changing the
2330 test pass/fail messages. Detect missing support for dprintf when
2331 breakpoints are actually inserted.
2332 * gdb.base/mi-dprintf.exp: Detect missing support for dprintf when
2333 breakpoints are actually inserted.
2334 * lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue
2337 2014-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
2339 * gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1".
2341 2014-03-22 Doug Evans <xdje42@gmail.com>
2343 * gdb.python/python.exp (python not supported): Verify multi-line
2344 python command issues an error.
2345 * gdb.guile/guile.exp (guile not supported): Verify multi-line
2346 guile command issues an error.
2348 2014-03-21 Maciej W. Rozycki <macro@codesourcery.com>
2350 * gdb.threads/thread-specific.exp: Handle the lack of usable
2351 $this_breakpoint and $this_thread.
2353 2014-03-21 Hui Zhu <hui@codesourcery.com>
2355 * gdb.base/attach.exp (do_command_attach_tests): New.
2357 2014-03-20 Tom Tromey <tromey@redhat.com>
2358 Pedro Alves <palves@redhat.com>
2361 * gdb.base/condbreak-call-false.c: New file.
2362 * gdb.base/condbreak-call-false.exp: New file.
2364 2014-03-20 Pedro Alves <palves@redhat.com>
2366 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid):
2368 (block_signals, unblock_signals): Delete.
2369 (child_function_2, main): Remove references to deleted variable
2372 2014-03-20 Pedro Alves <palves@redhat.com>
2374 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (main):
2375 Use pthread_kill to signal thread 2.
2376 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
2377 Adjust to make the test send itself a signal rather than using the
2378 host's "kill" command.
2380 2014-03-20 Pedro Alves <palves@redhat.com>
2382 * gdb.threads/multiple-step-overs.c: New file.
2383 * gdb.threads/multiple-step-overs.exp: New file.
2384 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
2385 Adjust expected infrun debug output.
2387 2014-03-20 Pedro Alves <palves@redhat.com>
2389 * gdb.threads/step-over-trips-on-watchpoint.c: New file.
2390 * gdb.threads/step-over-trips-on-watchpoint.exp: New file.
2392 2014-03-20 Pedro Alves <palves@redhat.com>
2395 * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
2396 old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
2397 of gdb_test_multiple.
2398 * gdb.cp/annota2.exp: Remove kfail for gdb/38.
2399 * gdb.cp/annota3.exp: Remove kfail for gdb/38.
2401 2014-03-20 Pedro Alves <palves@redhat.com>
2403 * gdb.threads/step-over-lands-on-breakpoint.c: New file.
2404 * gdb.threads/step-over-lands-on-breakpoint.exp: New file.
2406 2014-03-19 Pedro Alves <palves@redhat.com>
2408 * gdb.base/async.exp: Remove early return.
2410 2014-03-19 Pedro Alves <palves@redhat.com>
2412 * gdb.base/async.exp (step& tests): Pass explicit test messages.
2414 2014-03-19 Pedro Alves <palves@redhat.com>
2416 * gdb.base/async.exp (test_background): Expect \r\n after
2417 "completed." in the fail pattern.
2419 2014-03-19 Pedro Alves <palves@redhat.com>
2421 * gdb.base/async.exp (test_background): New procedure.
2422 Use it for all background execution command tests.
2424 2014-03-19 Pedro Alves <palves@redhat.com>
2426 * gdb.base/async.exp: Use prepare_for_testing.
2428 2014-03-19 Pedro Alves <palves@redhat.com>
2430 * gdb.base/async.c (foo): Make 'x' volatile. Write to it twice in
2433 2014-03-19 Pedro Alves <palves@redhat.com>
2435 * gdb.base/async.c (main): Add "jump here" and "until here" line
2437 * gdb.base/async.exp (jump_here): New global.
2438 (jump& test): Use it.
2439 (until_here): New global.
2440 (until& test): Use it.
2442 2014-03-19 Pedro Alves <palves@redhat.com>
2444 * gdb.base/async.exp: Don't frob gdb_protocol.
2446 2014-03-18 Doug Evans <xdje42@gmail.com>
2448 * gdb.base/async.exp: Whitespace fixes. Turn on target-async.
2449 Fix spelling of exec-done-display.
2451 2014-03-18 Jan Kratochvil <jan.kratochvil@redhat.com>
2454 * gdb.base/gdb-sigterm.c: New file.
2455 * gdb.base/gdb-sigterm.exp: New file.
2457 2014-03-18 Pedro Alves <palves@redhat.com>
2460 * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail.
2461 * lib/mi-support.exp (mi_expect_stop): Add special handling for
2464 2014-03-17 Joel Brobecker <brobecker@adacore.com>
2466 * gdb.ada/pckd_arr_ren: New testcase.
2468 2014-03-13 Doug Evans <xdje42@gmail.com>
2471 * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage
2472 collect after discarding symbols.
2474 2014-03-13 Ludovic Courtès <ludo@gnu.org>
2475 Doug Evans <xdje42@gmail.com>
2477 * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added
2478 to history survives a gc.
2480 2014-03-13 Pedro Alves <palves@redhat.com>
2482 * gdb.base/default.exp: Don't test "target procfs".
2484 2014-03-13 Pedro Alves <palves@redhat.com>
2486 * gdb.base/default.exp: Update "target child" and "target procfs"
2487 tests to not expect "Unix".
2489 2014-03-12 Tom Tromey <tromey@redhat.com>
2491 * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
2492 New procs. Add target-async tests.
2493 * gdb.reverse/break-precsave.exp (precsave_tests): New proc.
2494 Add target-async tests.
2496 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
2498 * gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels
2499 'func_start' and 'func_end' for the beginning and end of the
2500 function code, respectively.
2501 * gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and
2502 'func_end' instead of 'func' and 'main'.
2504 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
2506 * gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove.
2507 * gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to
2508 generate the debug info assembler source.
2510 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
2512 * gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'.
2513 * gdb.dwarf2/arr-subrange.exp: Likewise.
2514 * gdb.dwarf2/dwz.exp: Likewise.
2515 * gdb.dwarf2/method-ptr.exp: Likewise.
2516 * gdb.dwarf2/missing-sig-type.exp: Likewise.
2517 * gdb.dwarf2/subrange.exp: Likewise.
2518 * gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'.
2519 * gdb.dwarf2/implptrpiece.exp: Likewise.
2520 * gdb.dwarf2/nostaticblock.exp: Likewise.
2522 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
2524 * lib/gdb.exp (build_executable_from_specs): Don't prepend source
2525 directory to absolute path name arguments.
2527 2014-03-10 Joel Brobecker <brobecker@adacore.com>
2529 * gdb.ada/tagged_access: New testcase.
2531 2014-03-07 Markus Metzger <markus.t.metzger@intel.com>
2533 * gdb.btrace/data.exp: Update expected output.
2535 2014-03-06 Yao Qi <yao@codesourcery.com>
2537 * gdb.trace/pr16508.exp: New file.
2539 2014-03-05 Pedro Alves <palves@redhat.com>
2542 * gdb.base/breakpoint-shadow.exp (compare_disassembly): New
2544 (top level): Adjust to use it. Add tests that exercise breakpoint
2545 interaction with the code-cache.
2547 2014-02-26 Ludovic Courtès <ludo@gnu.org>
2549 * gdb.guile/scm-value.exp (test_value_in_inferior): Add
2550 test for 'history-append!'.
2552 2014-02-26 Joel Brobecker <brobecker@adacore.com>
2554 * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
2555 * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
2556 * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
2557 * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
2558 * gdb.dwarf2/dw2-abs-hi-pc.c: New file.
2559 * gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
2561 2014-02-26 Joel Brobecker <brobecker@adacore.com>
2563 * testsuite/gdb.python/py-pp-re-notag.c: New file.
2564 * testsuite/gdb.python/py-pp-re-notag.ex: New file.
2565 * testsuite/gdb.python/py-pp-re-notag.p: New file.
2567 2014-02-26 Joel Brobecker <brobecker@adacore.com>
2569 * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
2571 2014-02-26 Joel Brobecker <brobecker@adacore.com>
2573 * gdb.dwarf2/arr-stride.c: New file.
2574 * gdb.dwarf2/arr-stride.exp: New file.
2576 2014-02-26 Pedro Alves <palves@redhat.com>
2578 * gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
2579 that won't ever trigger. Make sure that GDB reports the correct
2580 breakpoint that caused the stop.
2582 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2585 * gdb.base/auto-load-script: New file.
2586 * gdb.base/auto-load.c: New file.
2587 * gdb.base/auto-load.exp: New file.
2590 * gdb.base/auto-load.exp: Fix out-of-srctree run.
2592 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2594 Fix dw2-icycle.exp -fsanitize=address GDB crash.
2595 * gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling.
2597 2014-02-24 Doug Evans <dje@google.com>
2599 * lib/gdb.exp (run_on_host): Log error output if program fails.
2601 2014-02-21 Pedro Alves <palves@redhat.com>
2603 * gdb.threads/step-after-sr-lock.c: Rename to ...
2604 * gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
2605 * gdb.threads/step-after-sr-lock.exp: Rename to ...
2606 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
2609 2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
2612 * gdb.arch/amd64-stap-special-operands.exp: New file.
2613 * gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
2614 * gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
2615 * gdb.arch/amd64-stap-triplet.S: Likewise.
2616 * gdb.arch/amd64-stap-triplet.c: Likewise.
2618 2014-02-20 Joel Brobecker <brobecker@adacore.com>
2620 * gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
2621 in .section pseudo-op.
2623 2014-02-20 lin zuojian <manjian2006@gmail.com>
2624 Joel Brobecker <brobecker@adacore.com>
2625 Doug Evans <xdje42@gmail.com>
2628 * gdb.dwarf2/dw2-icycle.S: New file.
2629 * gdb.dwarf2/dw2-icycle.c: New file.
2630 * gdb.dwarf2/dw2-icycle.exp: New file.
2632 2014-02-19 Siva Chandra Reddy <sivachandra@google.com>
2634 * gdb.python/py-value-cc.cc: Improve test case to enable testing
2635 operations on gdb.Value objects.
2636 * gdb.python/py-value-cc.exp: Add new test to test operations on
2639 2014-02-18 Doug Evans <dje@google.com>
2641 * Makefile.in (TESTS): New variable.
2642 (expanded_tests, expanded_tests_or_none): New variables
2643 (check-single): Pass $(expanded_tests_or_none) to runtest.
2644 (check-parallel): Only run tests in $(TESTS) if non-empty.
2645 (check/no-matching-tests-found): New rule.
2646 * README: Document TESTS makefile variable.
2648 2014-02-18 Doug Evans <dje@google.com>
2650 * Makefile.in (check-parallel): rm -rf outputs temp.
2652 2014-02-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2654 Fix "ERROR: no fileid for" in the testsuite.
2655 * lib/gdb.exp (gdb_finish): Check gdb_spawn_id.
2657 2014-02-12 Doug Evans <dje@google.com>
2659 * gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
2660 (MISCELLANEOUS): New variable.
2661 (clean): rm -rf $(MISCELLANEOUS).
2662 * gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
2663 dwp live in the same directory as symlinks, with each symlink pointed
2664 to a differently named file in a different directory.
2666 2014-02-11 Doug Evans <dje@google.com>
2668 * gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead
2669 of Tcl file commands.
2671 2014-02-10 Mark Kettenis <kettenis@gnu.org>
2673 * gdb.threads/step-after-sr-lock.exp: Avoid executing
2676 2014-02-10 Joel Brobecker <brobecker@adacore.com>
2678 * gdb.ada/tick_length_array_enum_idx: New testcase.
2680 2014-02-10 Doug Evans <xdje42@gmail.com>
2682 * configure.ac (AC_OUTPUT): Add gdb.guile.
2683 * configure: Regenerate.
2684 * lib/gdb-guile.exp: New file.
2685 * lib/gdb.exp (get_target_charset): New function.
2686 * gdb.base/help.exp: Update expected output from "apropos apropos".
2687 * gdb.guile/Makefile.in: New file.
2688 * gdb.guile/guile.exp: New file.
2689 * gdb.guile/scm-arch.c: New file.
2690 * gdb.guile/scm-arch.exp: New file.
2691 * gdb.guile/scm-block.c: New file.
2692 * gdb.guile/scm-block.exp: New file.
2693 * gdb.guile/scm-breakpoint.c: New file.
2694 * gdb.guile/scm-breakpoint.exp: New file.
2695 * gdb.guile/scm-disasm.c: New file.
2696 * gdb.guile/scm-disasm.exp: New file.
2697 * gdb.guile/scm-equal.c: New file.
2698 * gdb.guile/scm-equal.exp: New file.
2699 * gdb.guile/scm-error.exp: New file.
2700 * gdb.guile/scm-error.scm: New file.
2701 * gdb.guile/scm-frame-args.c: New file.
2702 * gdb.guile/scm-frame-args.exp: New file.
2703 * gdb.guile/scm-frame-args.scm: New file.
2704 * gdb.guile/scm-frame-inline.c: New file.
2705 * gdb.guile/scm-frame-inline.exp: New file.
2706 * gdb.guile/scm-frame.c: New file.
2707 * gdb.guile/scm-frame.exp: New file.
2708 * gdb.guile/scm-generics.exp: New file.
2709 * gdb.guile/scm-gsmob.exp: New file.
2710 * gdb.guile/scm-iterator.c: New file.
2711 * gdb.guile/scm-iterator.exp: New file.
2712 * gdb.guile/scm-math.c: New file.
2713 * gdb.guile/scm-math.exp: New file.
2714 * gdb.guile/scm-objfile-script-gdb.in: New file.
2715 * gdb.guile/scm-objfile-script.c: New file.
2716 * gdb.guile/scm-objfile-script.exp: New file.
2717 * gdb.guile/scm-objfile.c: New file.
2718 * gdb.guile/scm-objfile.exp: New file.
2719 * gdb.guile/scm-ports.exp: New file.
2720 * gdb.guile/scm-pretty-print.c: New file.
2721 * gdb.guile/scm-pretty-print.exp: New file.
2722 * gdb.guile/scm-pretty-print.scm: New file.
2723 * gdb.guile/scm-section-script.c: New file.
2724 * gdb.guile/scm-section-script.exp: New file.
2725 * gdb.guile/scm-section-script.scm: New file.
2726 * gdb.guile/scm-symbol.c: New file.
2727 * gdb.guile/scm-symbol.exp: New file.
2728 * gdb.guile/scm-symtab-2.c: New file.
2729 * gdb.guile/scm-symtab.c: New file.
2730 * gdb.guile/scm-symtab.exp: New file.
2731 * gdb.guile/scm-type.c: New file.
2732 * gdb.guile/scm-type.exp: New file.
2733 * gdb.guile/scm-value-cc.cc: New file.
2734 * gdb.guile/scm-value-cc.exp: New file.
2735 * gdb.guile/scm-value.c: New file.
2736 * gdb.guile/scm-value.exp: New file.
2737 * gdb.guile/source2.scm: New file.
2738 * gdb.guile/types-module.cc: New file.
2739 * gdb.guile/types-module.exp: New file.
2741 2014-02-10 Yao Qi <yao@codesourcery.com>
2744 * configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
2745 * configure: Regenerated.
2746 * Makefile.in: New file.
2748 2014-02-08 Andreas Schwab <schwab@linux-m68k.org>
2750 * gdb.python/py-framefilter.exp: Fix typo.
2752 2014-02-08 Yao Qi <yao@codesourcery.com>
2754 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
2755 that no =breakpoint-modified is emitted when breakpoints are
2756 modified through MI commands.
2758 2014-02-07 Pedro Alves <pedro@codesourcery.com>
2759 Pedro Alves <palves@redhat.com>
2761 * gdb.threads/step-after-sr-lock.c: New file.
2762 * gdb.threads/step-after-sr-lock.exp: New file.
2764 2014-02-07 Pedro Alves <palves@redhat.com>
2766 * gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.
2768 2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2770 Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
2771 * gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
2773 2014-02-06 Doug Evans <xdje42@gmail.com>
2775 * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
2778 * gdb.gdb/python-interrupts.exp: New file.
2780 2014-02-05 Yao Qi <yao@codesourcery.com>
2782 * gdb.trace/report.exp (use_collected_data): Test the output
2783 of "info threads" and "info inferiors".
2785 2014-02-05 Yao Qi <yao@codesourcery.com>
2789 2013-05-24 Yao Qi <yao@codesourcery.com>
2791 * gdb.trace/tfile.exp: Test inferior and thread.
2793 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
2795 * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
2797 * gdb.base/step-bt.c: Call hello via function pointer to make
2798 sure its first instruction is executed on powerpc64le-linux.
2800 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
2802 * gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
2804 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
2806 * gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
2807 of the test patterns for use on little-endian systems.
2809 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
2811 * gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
2812 (decimal_vector): Fix for little-endian.
2814 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
2816 * gdb.arch/sparc-sysstep.exp: New file.
2817 * gdb.arch/sparc-sysstep.c: Likewise.
2819 * gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
2821 2014-01-28 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2823 * gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols.
2825 2014-01-23 Tom Tromey <tromey@redhat.com>
2827 * gdb.ada/array_char_idx: New testcase.
2829 2014-01-23 Tom Tromey <tromey@redhat.com>
2832 * gdb.python/py-framefilter.exp: Add test using "Error" filter.
2833 * gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
2836 2014-01-23 Tom Tromey <tromey@redhat.com>
2839 * gdb.python/py-framefilter.py (Reverse_Function.function): Read a
2840 string from an inferior frame.
2841 * gdb.python/py-framefilter-mi.exp: Update.
2843 2014-01-22 Doug Evans <dje@google.com>
2845 * gdb.server/server-mon.exp: Add tests for "set debug-format".
2847 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
2849 * gdb.base/catch-syscall.exp: Activate test on s390*-linux.
2851 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
2853 * gdb.trace/entry-values.exp: Remove excess space character from
2854 regex patterns. Handle s390 call instruction.
2856 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
2858 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
2859 define "*_start" label. Make "name" static.
2860 * gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
2861 ${name} by references to ${name}_start.
2863 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
2865 * gdb.base/info-macros.exp: Remove "debug" from the compile
2868 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
2870 * gdb.dlang/demangle.exp: New file.
2872 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
2874 * gdb.dlang/primitive-types.exp: New file.
2876 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
2878 * configure.ac: Create gdb.dlang/Makefile.
2879 * configure: Regenerate.
2880 * Makefile.in (ALL_SUBDIRS): Add gdb.dlang.
2881 * gdb.dlang/Makefile.in: New file.
2882 * lib/d-support.exp: New file.
2883 * lib/gdb.exp (skip_d_tests): New proc.
2885 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2887 * gdb.btrace/delta.exp: Check reverse stepi.
2888 * gdb.btrace/tailcall.exp: Update. Add stepping tests.
2889 * gdb.btrace/finish.exp: New.
2890 * gdb.btrace/next.exp: New.
2891 * gdb.btrace/nexti.exp: New.
2892 * gdb.btrace/record_goto.c: Add comments.
2893 * gdb.btrace/step.exp: New.
2894 * gdb.btrace/stepi.exp: New.
2895 * gdb.btrace/multi-thread-step.c: New.
2896 * gdb.btrace/multi-thread-step.exp: New.
2897 * gdb.btrace/rn-dl-bind.c: New.
2898 * gdb.btrace/rn-dl-bind.exp: New.
2899 * gdb.btrace/data.c: New.
2900 * gdb.btrace/data.exp: New.
2901 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
2903 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2905 * gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
2906 * gdb.btrace/exception.exp: Update.
2907 * gdb.btrace/instruction_history.exp: Update.
2908 * gdb.btrace/record_goto.exp: Update.
2909 * gdb.btrace/tailcall.exp: Update.
2910 * gdb.btrace/unknown_functions.exp: Update.
2911 * gdb.btrace/delta.exp: New.
2913 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2915 * gdb.btrace/record_goto.exp: Add backtrace test.
2916 * gdb.btrace/tailcall.exp: Add backtrace test.
2918 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2920 * gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto.
2921 * gdb.btrace/record_goto.c: New.
2922 * gdb.btrace/record_goto.exp: New.
2923 * gdb.btrace/x86-record_goto.S: New.
2925 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2927 * gdb.btrace/function_call_history.exp: Update tests.
2928 * gdb.btrace/instruction_history.exp: Update tests.
2930 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2932 * gdb.btrace/function_call_history.exp: Fix expected field
2933 order for "record function-call-history".
2934 Add new tests for "record function-call-history /c".
2935 * gdb.btrace/exception.cc: New.
2936 * gdb.btrace/exception.exp: New.
2937 * gdb.btrace/tailcall.exp: New.
2938 * gdb.btrace/x86-tailcall.S: New.
2939 * gdb.btrace/x86-tailcall.c: New.
2940 * gdb.btrace/unknown_functions.c: New.
2941 * gdb.btrace/unknown_functions.exp: New.
2942 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
2944 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2946 * gdb.btrace/instruction_history.exp: Update.
2947 * gdb.btrace/function_call_history.exp: Update.
2949 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2951 * gdb.btrace/function_call_history.exp: Fix expected function
2953 * gdb.btrace/instruction_history.exp: Initialize traced.
2954 Remove traced_functions.
2956 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2958 * gdb.btrace/function_call_history.exp: Update
2959 * gdb.btrace/instruction_history.exp: Update.
2961 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2963 * gdb.btrace/enable.exp: Update expected text.
2965 2014-01-16 Omair Javaid <Omair.Javaid@linaro.org>
2967 * gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
2970 2014-01-15 Maciej W. Rozycki <macro@codesourcery.com>
2972 * gdb.base/float.exp: Handle "aarch64*-*-*" targets.
2974 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
2976 * lib/gdb.exp (supports_process_record): Return true for
2977 arm*-linux*. (supports_reverse): Likewise.
2979 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
2983 * gdb.python/py-type.c: Enhance test case.
2984 * gdb.python/py-value-cc.cc: Likewise
2985 * gdb.python/py-type.exp: Add new tests.
2986 * gdb.python/py-value-cc.exp: Likewise
2988 2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
2989 Pedro Alves <palves@redhat.com>
2991 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
2993 * gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
2994 references to ${name}_start by references to ${name}.
2996 2014-01-10 Joel Brobecker <brobecker@adacore.com>
2998 * gdb.ada/pp-rec-component.exp: Remove path from "source" test.
3000 2014-01-10 Joel Brobecker <brobecker@adacore.com>
3002 * gdb.python/py-pp-integral.exp: Remove path from "source" test.
3004 2014-01-09 Maciej W. Rozycki <macro@codesourcery.com>
3005 Pedro Alves <palves@redhat.com>
3007 * gdb.mi/mi-info-os.exp: Connect to the target with
3010 2014-01-08 Pedro Alves <palves@redhat.com>
3012 * gdb.threads/reconnect-signal.c: New file.
3013 * gdb.threads/reconnect-signal.exp: New file.
3015 2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
3017 * gdb.base/source-dir.exp: New file.
3019 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3021 * gdb.ada/mi_interface: New testcase.
3023 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3025 * gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
3026 gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
3027 gdb.ada/pp-rec-component/pck.ads: New files.
3029 2014-01-07 Joel Brobecker <brobecker@adacore.com>
3031 * gdb.python/py-pp-integral.c: New file.
3032 * gdb.python/py-pp-integral.py: New file.
3033 * gdb.python/py-pp-integral.exp: New file.
3035 For older changes see ChangeLog-1993-2013.
3041 ;; version-control: never
3044 Copyright 2014 Free Software Foundation, Inc.
3045 Copying and distribution of this file, with or without modification,
3046 are permitted provided the copyright notice and this notice are preserved.