1 2014-10-01 Pedro Alves <palves@redhat.com>
3 * gdb.base/breakpoint-in-ro-region.c: New file.
4 * gdb.base/breakpoint-in-ro-region.exp: New file.
6 2014-10-01 Simon Marchi <simon.marchi@ericsson.com>
8 * gdb.mi/mi-exit-code.exp: New file.
9 * gdb.mi/mi-exit-code.c: New file.
11 2014-09-30 Yao Qi <yao@codesourcery.com>
13 * lib/prelink-support.exp (build_executable_own_libs): Error if
14 the target isn't native.
16 2014-09-30 Yao Qi <yao@codesourcery.com>
18 * gdb.threads/dlopen-libpthread.exp: Skip it if isnative is
21 2014-09-22 Pedro Alves <palves@redhat.com>
23 * gdb.threads/break-while-running.exp: New file.
24 * gdb.threads/break-while-running.c: New file.
26 2014-09-19 Yao Qi <yao@codesourcery.com>
28 * gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test.
29 Invoke test. Restart GDB with --readnow and invoke test again.
31 2014-09-19 Yao Qi <yao@codesourcery.com>
33 * gdb.base/break-on-linker-gcd-function.exp: Move test into new
34 proc set_breakpoint_on_gcd_function. Invoke
35 set_breakpoint_on_gcd_function. Restart GDB with --readnow and
36 invoke set_breakpoint_on_gcd_function again.
38 2014-09-18 Doug Evans <dje@google.com>
40 * gdb.dwarf2/symtab-producer.exp: New file.
42 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
44 * gdb.base/global-var-nested-by-dso-solib1.c: New file.
45 * gdb.base/global-var-nested-by-dso-solib2.c: Likewise.
46 * gdb.base/global-var-nested-by-dso.c: Likewise.
47 * gdb.base/global-var-nested-by-dso.exp: Likewise.
49 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
50 Pedro Alves <palves@redhat.com>
52 * gdb.base/watch-bitfields.exp: Pass string other than test file
53 name to prepare_for_testing.
54 (watch): New procedure.
55 (expect_watchpoint): Use with_test_prefix.
56 (top level): Factor out tests to ...
57 (test_watch_location, test_regular_watch): ... these new
58 procedures, and use with_test_prefix and gdb_continue_to_end.
60 2014-09-16 Patrick Palka <patrick@parcs.ath.cx>
63 * gdb.base/watch-bitfields.exp: New file.
64 * gdb.base/watch-bitfields.c: New file.
66 2014-09-16 Pedro Alves <palves@redhat.com>
68 * gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare
69 software and hardware addresses, not software address against
72 2014-09-16 Pedro Alves <palves@redhat.com>
74 * gdb.base/watchpoint-stops-at-right-insn.c: New file.
75 * gdb.base/watchpoint-stops-at-right-insn.exp: New file.
77 2014-09-16 Pedro Alves <palves@redhat.com>
79 * config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete
81 * gdb.base/a2-run.exp: Remove all code guarded by istarget
82 "*-*-vxworks*" throughout.
83 * gdb.base/break.exp: Likewise.
84 * gdb.base/default.exp: Likewise.
85 * gdb.base/scope.exp: Likewise.
86 * gdb.base/sepdebug.exp: Likewise.
87 * gdb.base/break.c: Remove all code guarded by #ifdef vxworks
89 * gdb.base/run.c: Likewise.
90 * gdb.base/sepdebug.c: Likewise.
91 * gdb.hp/gdb.aCC/run.c: Likewise.
92 * gdb.reverse/until-reverse.c: Likewise.
93 * lib/gdb.exp (gdb_compile): Remove is_vxworks branch.
95 2014-09-16 Yao Qi <yao@codesourcery.com>
97 * boards/local-remote-host-native.exp: New file.
99 2014-09-14 Doug Evans <xdje42@gmail.com>
101 * gdb.threads/queue-signal.c (thread_count): New variable.
102 (thread_count_mutex, thread_count_condvar): New variables.
103 (incr_thread_count, wait_all_threads_running): New functions.
104 (main): Wait for all threads to be in their thread functions.
106 2014-09-13 Doug Evans <xdje42@gmail.com>
108 * gdb.threads/queue-signal.c: New file.
109 * gdb.threads/queue-signal.exp: New file.
111 2014-09-13 Doug Evans <xdje42@gmail.com>
113 * lib/gdb.exp (gdb_prompt): Add comment and change initial value to
114 be consistent with what default_gdb_init uses.
115 (with_gdb_prompt): Change form of PROMPT argument from a regexp to
116 the plain text of the prompt. Add some logging printfs.
117 * gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
119 2014-09-12 Pedro Alves <palves@redhat.com>
121 * gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
122 gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
123 * gdb.arch/i386-size-overlap.exp: Likewise.
124 * gdb.arch/i386-size.exp: Likewise.
125 * gdb.arch/i386-unwind.exp: Likewise.
126 * gdb.base/a2-run.exp: Likewise.
127 * gdb.base/break.exp: Likewise.
128 * gdb.base/charset.exp: Likewise.
129 * gdb.base/chng-syms.exp: Likewise.
130 * gdb.base/commands.exp: Likewise.
131 * gdb.base/dbx.exp: Likewise.
132 * gdb.base/find.exp: Likewise.
133 * gdb.base/funcargs.exp: Likewise.
134 * gdb.base/jit-simple.exp: Likewise.
135 * gdb.base/reread.exp: Likewise.
136 * gdb.base/sepdebug.exp: Likewise.
137 * gdb.base/step-bt.exp: Likewise.
138 * gdb.cp/mb-inline.exp: Likewise.
139 * gdb.cp/mb-templates.exp: Likewise.
140 * gdb.objc/basicclass.exp: Likewise.
141 * gdb.threads/killed.exp: Likewise.
143 2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
146 * gdb.arch/powerpc-stackless.S: New file.
147 * gdb.arch/powerpc-stackless.exp: New file.
149 2014-09-12 Jan Kratochvil <jan.kratochvil@redhat.com>
151 * gdb.base/attach.c: Include unistd.h.
152 (main): Call alarm. Add label postloop.
153 * gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
154 gdb_breakpoint, gdb_continue_to_breakpoint.
155 (test_command_line_attach_run): Kill ${testpid} in one exit path.
157 2014-09-11 Pedro Alves <palves@redhat.com>
160 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
161 * gdb.base/attach.exp (test_command_line_attach_run): New
163 (top level): Call it.
165 2014-09-11 Pedro Alves <palves@redhat.com>
167 * lib/gdb.exp (spawn_wait_for_attach): New procedure.
168 * gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
169 (do_command_attach_tests): Use spawn_wait_for_attach.
170 * gdb.base/solib-overlap.exp: Likewise.
171 * gdb.multi/multi-attach.exp: Likewise.
172 * gdb.python/py-prompt.exp: Likewise.
173 * gdb.python/py-sync-interp.exp: Likewise.
174 * gdb.server/ext-attach.exp: Likewise.
176 2014-09-11 Gabriel Krisman Bertazi <gabriel@krisman.be>
178 * gdb.fortran/array-element.exp: Remove unexpected "continue"
179 command in testcase. Simplify testcase.
181 2014-09-10 Joel Brobecker <brobecker@adacore.com>
183 * gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests.
185 2014-09-10 Joel Brobecker <brobecker@adacore.com>
187 * gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.
189 2014-09-10 Joel Brobecker <brobecker@adacore.com>
191 * gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.
193 2014-09-10 Joel Brobecker <brobecker@adacore.com>
195 * gdb.dwarf2/dynarr-ptr.c: New file.
196 * gdb.dwarf2/dynarr-ptr.exp: New file.
198 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
200 * gdb.base/watchpoint-solib.exp: Increase the timeout by a factor
201 of 30 rather than hardcoding 120 for a slow test case. Take the
202 `gdb,timeout' target setting into account for this calculation.
203 Don't extend the timeout for the test cases that don't need it.
205 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
207 * gdb.reverse/sigall-reverse.exp: Increase the timeout by
208 a factor of 2 for a slow test case. Take the `gdb,timeout'
209 target setting into account for this calculation.
210 * gdb.reverse/until-precsave.exp: Increase the timeout by
211 a factor of 15 and 3 respectively rather than adding 120
212 for a pair of slow test cases. Take the `gdb,timeout'
213 target setting into account for this calculation.
215 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
217 * lib/gdb.exp (gdb_test_multiple): Remove code to select the
218 timeout, don't pass one down to gdb_expect.
219 (gdb_expect): Rework timeout selection.
221 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
223 * lib/gdbserver-support.exp (gdbserver_start): Throw an error
224 exception on timeout.
225 (gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
226 (gdbserver_start_extended): Catch any `gdbserver_start' error
228 (gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
229 * lib/mi-support.exp (mi_gdb_target_load): Catch any
230 `gdbserver_gdb_load' error exceptions.
232 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
234 * lib/gdbserver-support.exp (gdbserver_start): Set timeout to
235 120 on waiting for the TCP socket to open.
237 2014-09-09 Doug Evans <xdje42@gmail.com>
239 * gdb.base/default.exp (show_conv_list): Add _caller_is,
240 _caller_matches, _any_caller_is, _any_caller_matches.
242 2014-09-09 Doug Evans <xdje42@gmail.com>
244 * gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output.
246 2014-09-09 Yao Qi <yao@codesourcery.com>
248 * gdb.mi/mi-var-display.exp: Set print symbol off.
250 2014-09-07 Gabriel Krisman Bertazi <gabriel@krisman.be>
253 * gdb.base/commands.exp: Add tests to verify user-defined
254 commands with empty bodies.
255 * gdb.python/py-cmd.exp: Test that we don't show user-defined
256 python commands in `show user command`.
257 * gdb.python/scm-cmd.exp: Test that we don't show user-defined
258 scheme commands in `show user command`.
260 2014-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
263 * gdb.python/amd64-py-framefilter-invalidarg.S: New file.
264 * gdb.python/py-framefilter-invalidarg-gdb.py.in: New file.
265 * gdb.python/py-framefilter-invalidarg.exp: New file.
266 * gdb.python/py-framefilter-invalidarg.py: New file.
268 2014-09-06 Doug Evans <xdje42@gmail.com>
271 * gdb.python/py-caller-is.c: New file.
272 * gdb.python/py-caller-is.exp: New file.
274 2014-09-05 Sergio Durigan Junior <sergiodj@redhat.com>
277 * gdb.arch/amd64-stap-wrong-subexp.exp: New file.
278 * gdb.arch/amd64-stap-wrong-subexp.S: Likewise.
280 2014-09-04 Sergio Durigan Junior <sergiodj@redhat.com>
283 * gdb.fortran/print-formatted.exp: New file.
284 * gdb.fortran/print-formatted.f90: Likewise.
286 2014-09-03 Sasha Smundak <asmundak@google.com>
288 * gdb.python/py-frame.exp: Test Frame.read_register.
290 2014-09-03 Sergio Durigan Junior <sergiodj@redhat.com>
293 * gdb.python/py-completion.exp: New file.
294 * gdb.python/py-completion.py: Likewise.
296 2014-08-28 Doug Evans <dje@google.com>
298 * gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
299 eax,etc. are live with values set by gdb and thus the compiler can't
301 * gdb.arch/i386-pseudo.c (main): Ditto.
303 2014-08-27 Doug Evans <dje@google.com>
305 * lib/gdb.exp (gdb_compile_shlib): Add support for clang.
307 2014-08-25 Doug Evans <dje@google.com>
309 * gdb.mi/basics.c (callee3, callee2, callee1): Specify result type.
312 2014-08-25 Doug Evans <dje@google.com>
314 * gdb.threads/thread-execl.exp: #include <stdio.h>.
316 2014-08-24 Yao Qi <yao@codesourcery.com>
318 * gdb.guile/scm-value.exp (test_lazy_strings): Set print
320 * gdb.python/py-value.exp (test_lazy_strings): Likewise.
322 2014-08-22 Doug Evans <dje@google.com>
325 * gdb.dwarf2/dw2-single-line-discriminators.S: New file.
326 * gdb.dwarf2/dw2-single-line-discriminators.c: New file.
327 * gdb.dwarf2/dw2-single-line-discriminators.exp: New file.
329 2014-08-22 Yao Qi <yao@codesourcery.com>
331 * gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
332 * gdb.python/py-finish-breakpoint2.exp: Likewise.
333 * gdb.python/python.exp: Likewise. Use .py file on the host
334 instead of the build.
336 2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
338 * gdb.threads/gcore-stale-thread.c: New file.
339 * gdb.threads/gcore-stale-thread.exp: New file.
341 2014-08-21 Pedro Alves <palves@redhat.com>
343 * gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
344 * gdb.base/gcore-relro-pie.exp: Likewise.
345 * gdb.base/gcore-relro.exp: Likewise.
346 * gdb.base/gcore.exp: Likewise.
347 * gdb.base/print-symbol-loading.exp: Likewise.
348 * gdb.threads/gcore-thread.exp: Likewise.
349 * lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
351 2014-08-20 Pedro Alves <palves@redhat.com>
352 Jan Kratochvil <jan.kratochvil@redhat.com>
354 * Makefile.in (EXTRA_RULES, CC): New variables, get from
356 (EXPECT): Handle READ1 being set.
357 (all): Depend on EXTRA_RULES.
358 (check-read1, expect-read1, read1.so, read1): New rules.
359 * README (Testsuite Parameters): Document the READ1 make variable.
360 (Race detection): New section.
361 * configure: Regenerate.
362 * configure.ac: If build==host==target, and running under a
363 GNU/glibc system, add read1 to the extra Makefile rules.
364 (EXTRA_RULES): AC_SUBST it.
365 * lib/read1.c: New file.
367 2014-08-20 Joel Brobecker <brobecker@adacore.com>
369 * gdb.dwarf2/data-loc.exp: Add additional tests exercising
370 the handling of variables declared as a typedef to an array
371 which a DW_AT_data_location attribute.
373 2014-08-19 Andrew Burgess <aburgess@broadcom.com>
374 Pedro Alves <palves@redhat.com>
378 * gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
381 2014-08-19 Pedro Alves <palves@redhat.com>
383 * gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
385 2014-08-19 Yao Qi <yao@codesourcery.com>
387 * gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
390 2014-08-18 David Blaikie <dblaikie@gmail.com>
392 * boards/fission.exp: Explicitly pass -ggnu-pubnames for clang.
394 2014-08-18 Joel Brobecker <brobecker@adacore.com>
396 * gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
397 attribute in array range.
399 2014-08-18 Joel Brobecker <brobecker@adacore.com>
401 * gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
403 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
406 * gdb.cp/pr17132.cc: New file.
407 * gdb.cp/pr17132.exp: New file.
409 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
411 * gdb.python/py-xmethods.py (A_getarrayind)
412 (E_method_char_worker.__call__, E_method_int_worker.__call__):
413 Use 'print' with function call syntax.
414 (E_method_matcher.match): Fix tab vs space indentation mixup.
416 2014-08-15 Yao Qi <yao@codesourcery.com>
418 * gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
421 2014-08-15 Yao Qi <yao@codesourcery.com>
423 * gdb.cp/casts.exp: Set print symbol off.
424 * gdb.cp/class2.exp: Likewise.
425 * gdb.cp/overload.exp: Likewise.
426 * gdb.cp/templates.exp: Likewise.
428 2014-08-11 Doug Evans <dje@google.com>
430 * gdb.base/print-symbol-loading.exp (test_load_core): Update.
431 (test_load_shlib): Update.
433 2014-08-09 Yao Qi <yao@codesourcery.com>
435 * gdb.base/display.exp: Invoke is_address_zero_readable.
436 * gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
437 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
438 * gdb.base/hbreak-unmapped.exp: Return if
439 is_address_zero_readable returns true.
440 * gdb.base/signest.exp: Likewise.
441 * gdb.base/signull.exp: Likewise.
442 * gdb.base/sigbpt.exp: Likewise.
443 * gdb.guile/scm-disasm.exp: Do the test if
444 is_address_zero_readable returns false.
445 * gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
446 * gdb.python/py-arch.exp: Likewise.
447 * gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
448 * lib/gdb.exp (is_address_zero_readable): New proc.
450 2014-08-09 Yao Qi <yao@codesourcery.com>
453 * gdb.mi/mi-var-display.exp: Make test messages unique.
455 2014-08-04 Tom Tromey <tromey@redhat.com>
457 * gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
460 2014-08-04 Tom Tromey <tromey@redhat.com>
462 * gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
465 2014-08-01 Joel Brobecker <brobecker@adacore.com>
467 * gdb.base/vla-datatypes.c (vla_factory): Add new variable
468 inner_vla_struct_object_size.
469 * gdb.base/vla-datatypes.exp: Adjust last test, and mark it
472 2014-07-30 Pedro Alves <palves@redhat.com>
474 * gdb.threads/signal-command-handle-nopass.exp (test): Add
477 2014-07-29 Yao Qi <yao@codesourcery.com>
480 * gdb.base/until-nodebug.exp: New.
482 2014-07-28 Doug Evans <xdje42@gmail.com>
485 * gdb.guile/scm-parameter.exp: Add tests for trying to create
486 previously existing parameter, and previously ambiguously spelled
489 2014-07-28 Will Newton <will.newton@linaro.org>
491 * gdb.base/varargs.exp: Remove KFAILs for ARM.
493 2014-07-26 Ludovic Courtès <ludo@gnu.org>
494 Doug Evans <xdje42@gmail.com>
497 * gdb.guile/types-module.exp: Add tests for wrong type arguments.
499 2014-07-25 Pedro Alves <palves@redhat.com>
501 * gdb.threads/signal-command-handle-nopass.c: New file.
502 * gdb.threads/signal-command-handle-nopass.exp: New file.
503 * gdb.threads/signal-command-multiple-signals-pending.c: New file.
504 * gdb.threads/signal-command-multiple-signals-pending.exp: New file.
505 * gdb.threads/signal-delivered-right-thread.c: New file.
506 * gdb.threads/signal-delivered-right-thread.exp: New file.
508 2014-07-25 Pedro Alves <palves@redhat.com>
510 * gdb.base/double-prompt-target-event-error.exp
511 (cancel_pagination_in_target_event): Remove '-notransfer <return>'
513 (cancel_pagination_in_target_event): Rework double prompt
515 * gdb.base/paginate-after-ctrl-c-running.exp
516 (test_ctrlc_while_target_running_paginates): Remove '-notransfer
518 * gdb.base/paginate-bg-execution.exp
519 (test_bg_execution_pagination_return)
520 (test_bg_execution_pagination_cancel): Remove '-notransfer
522 * gdb.base/paginate-execution-startup.exp
523 (test_fg_execution_pagination_return)
524 (test_fg_execution_pagination_cancel): Remove '-notransfer
526 * gdb.base/paginate-inferior-exit.exp
527 (test_paginate_inferior_exited): Remove '-notransfer <return>'
529 * lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
530 * lib/gdb.exp (pagination_prompt): Run text through
532 (gdb_test_multiple): Match $pagination_prompt instead of
534 (string_to_regexp): Move to lib/gdb-utils.exp.
536 2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
538 * gdb.arch/amd64-entry-value-paramref.S: New file.
539 * gdb.arch/amd64-entry-value-paramref.cc: New file.
540 * gdb.arch/amd64-entry-value-paramref.exp: New file.
541 * gdb.arch/amd64-optimout-repeat.S: New file.
542 * gdb.arch/amd64-optimout-repeat.c: New file.
543 * gdb.arch/amd64-optimout-repeat.exp: New file.
545 2014-07-17 Jan Kratochvil <jan.kratochvil@redhat.com>
548 * gdb.base/statistics.exp: New file.
550 2014-07-17 Doug Evans <dje@google.com>
553 * gdb.base/maint.exp: Update testing of per-command stats.
555 2014-07-16 Pedro Alves <palves@redhat.com>
557 * gdb.trace/tfile.c: Include unistd.h and stdint.h.
558 (start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
559 (tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
560 (tfile_write_buf): New functions.
561 (add_memory_block): Rewrite using the above.
562 (adjust_function_address): New function.
563 (FUNCTION_ADDRESS): New macro.
564 (write_basic_trace_file): Remove short_x local, and use
565 tfile_write_16. Change type of func_addr local to unsigned long
566 long. Use FUNCTION_ADDRESS instead of handling the Thumb bit
567 here. Cast argument of add_memory_block to char pointer.
568 (write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS.
569 (main): Remove parameters.
570 * gdb.trace/tfile.exp: Remove nowarnings.
572 2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
574 * gdb.base/debug-expr.exp: Test string evaluation with
575 "debug expression" on.
577 2014-07-15 Pedro Alves <palves@redhat.com>
579 * gdb.base/reread.exp: Use clean_restart.
581 2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
583 * gdb.arch/avr-flash-qualifer.c: New.
584 * gdb.arch/avr-flash-qualifer.exp: New.
586 2014-07-14 Pedro Alves <palves@redhat.com>
588 * gdb.base/paginate-after-ctrl-c-running.c: New file.
589 * gdb.base/paginate-after-ctrl-c-running.exp: New file.
591 2014-07-14 Pedro Alves <palves@redhat.com>
593 * gdb.base/double-prompt-target-event-error.c: New file.
594 * gdb.base/double-prompt-target-event-error.exp: New file.
596 2014-07-14 Pedro Alves <palves@redhat.com>
599 * gdb.base/paginate-inferior-exit.c: New file.
600 * gdb.base/paginate-inferior-exit.exp: New file.
602 2014-07-14 Pedro Alves <palves@redhat.com>
605 * gdb.base/paginate-bg-execution.c: New file.
606 * gdb.base/paginate-bg-execution.exp: New file.
608 2014-07-14 Pedro Alves <palves@redhat.com>
611 * gdb.base/paginate-execution-startup.c: New file.
612 * gdb.base/paginate-execution-startup.exp: New file.
613 * lib/gdb.exp (pagination_prompt): New global.
614 (default_gdb_spawn): New procedure, factored out from
616 (default_gdb_start): Adjust to call default_gdb_spawn.
617 (gdb_spawn): New procedure.
619 2014-07-14 Pedro Alves <palves@redhat.com>
621 * lib/gdb.exp (gdb_assert): New procedure.
622 * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
624 2014-07-14 Pedro Alves <palves@redhat.com>
626 * gdb.base/execution-termios.c: New file.
627 * gdb.base/execution-termios.exp: New file.
629 2014-07-14 Tom Tromey <tromey@redhat.com>
631 * gdb.cp/vla-cxx.cc: New file.
632 * gdb.cp/vla-cxx.exp: New file.
634 2014-07-14 Tom Tromey <tromey@redhat.com>
636 * gdb.reverse/rerun-prec.c: New file.
637 * gdb.reverse/rerun-prec.exp: New file.
639 2014-07-12 Maciej W. Rozycki <macro@mips.com>
640 Maciej W. Rozycki <macro@codesourcery.com>
642 * lib/gdb-utils.exp: New file.
643 * lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
644 inline `gdb_init_command' processing.
645 (gdb_start_cmd): Likewise.
646 * lib/mi-support.exp (mi_run_cmd): Likewise.
647 * README: Document `gdb_init_command' and `gdb_init_commands'.
649 2014-07-11 Jan Kratochvil <jan.kratochvil@redhat.com>
651 Fix false FAIL running under a very long directory name.
652 * gdb.base/argv0-symlink.exp: Add "set print repeats 10000"
653 and "set print elements 10000". Twice.
655 2014-07-11 Yao Qi <yao@codesourcery.com>
657 * gdb.base/exprs.exp: "set print symbol off".
659 2014-07-11 Pedro Alves <palves@redhat.com>
661 * gdb.threads/kill.c: New file.
662 * gdb.threads/kill.exp: New file.
664 2014-07-10 Yao Qi <yao@codesourcery.com>
666 * gdb.trace/tfile.c (write_basic_trace_file)
667 [__thumb__||__thumb2__]: Clear the Thumb bit of the function
668 address written to trace file.
670 2014-07-09 Pedro Alves <palves@redhat.com>
672 * gdb.base/attach-wait-input.exp: New file.
673 * gdb.base/attach-wait-input.c: New file.
675 2014-07-09 Andrew Burgess <andrew.burgess@embecosm.com>
677 * gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
678 setting up test structures.
679 (main): Call new test function.
680 * gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
681 test function, continue into test function and walk test
684 2014-07-02 Yao Qi <yao@codesourcery.com>
686 * gdb.trace/entry-values.c: Define labels 'foo_start' and
687 'bar_start' at the beginning of functions 'foo' and 'bar'
689 * gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
690 instead of 'foo' and 'bar'.
692 2014-07-08 Markus Metzger <markus.t.metzger@intel.com>
694 * gdb.btrace/segv.exp: New.
695 * gdb.btrace/segv.c: New.
697 2014-07-02 Luis Machado <lgustavo@codesourcery.com>
699 * gdb.trace/entry-values.exp: Handle powerpc-specific branch
702 2014-06-30 Mark Wielaard <mjw@redhat.com>
704 * gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
705 vulture, vilify, villar): New volatile array constants.
706 (vindictive, vegetation): New const volatile array constants.
707 * gdb.base/volatile.exp: Test volatile and const volatile array
710 2014-06-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
712 * gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
713 target lacks support for awatch, rwatch, or hbreak.
715 2014-06-27 Yao Qi <yao@codesourcery.com>
717 * gdb.multi/dummy-frame-restore.exp: New.
718 * gdb.multi/dummy-frame-restore.c: New.
720 2014-06-25 Markus Metzger <markus.t.metzger@intel.com>
722 * gdb.btrace/gcore.exp: New.
724 2014-06-23 Pedro Alves <palves@redhat.com>
726 * gdb.base/watchpoint-reuse-slot.c: New file.
727 * gdb.base/watchpoint-reuse-slot.exp: New file.
729 2014-06-23 Siva Chandra Reddy <sivachandra@google.com>
731 * gdb.python/py-xmethods.exp: Use "progspace" instead of the
732 progspace's filename in 'info', 'enable' and 'disable' command
735 2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
737 * gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
738 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
739 * gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
741 2014-06-20 Gary Benson <gbenson@redhat.com>
743 * gdb.arch/i386-avx.exp: Fix include file location.
744 * gdb.arch/i386-sse.exp: Likewise.
746 2014-06-19 Iain Buclaw <ibuclaw@gdcproject.org>
748 * gdb.dlang/expression.exp: New file.
750 2014-06-19 Pedro Alves <palves@redhat.com>
752 * gdb.threads/thread-execl.exp (do_test): New procedure, factored
754 (top level): ... here. Iterate running tests under different
755 scheduler-locking settings.
757 2014-06-18 Luis Machado <lgustavo@codesourcery.com>
759 * gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
760 to DW_FORM_addr and use non-zero addresses.
762 2014-06-18 Siva Chandra Reddy <sivachandra@google.com>
765 * gdb.python/py-xmethods.cc: Add global function call counters and
766 increment them in their respective functions. Remove "cout"
768 * gdb.python/py-xmethods.exp: Make tests check the global function
769 call counters instead of depending on inferior IO.
771 2014-06-18 Don Breazeal <donb@codesourcery.com>
773 * gdb.base/foll-fork.exp (default_fork_parent_follow):
775 (explicit_fork_parent_follow): Deleted procedure.
776 (explicit_fork_child_follow): Deleted procedure.
777 (test_follow_fork): New procedure.
778 (do_fork_tests): Replace calls to deleted procedures with
779 calls to test_follow_fork and reset GDB for subsequent
782 2014-06-17 Yao Qi <yao@codesourcery.com>
784 * gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
787 2014-06-17 Luis Machado <lgustavo@codesourcery.com>
789 * gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
790 Initialize ptr and S explicitly.
791 (skip_type_update_when_not_use_rtti_test): Likewise.
793 2014-06-16 Keith Seitz <keiths@redhat.com>
796 * gdb.mi/mi-var-cmd.exp: Add test for -var-update before
797 the inferior is started.
799 2014-06-16 Pedro Alves <palves@redhat.com>
801 * gdb.base/break-main-file-remove-fail.c: New file.
802 * gdb.base/break-main-file-remove-fail.exp: New file.
803 * gdb.base/break-unload-file.exp: Use build_executable instead of
805 (test_break): New parameter "initial_load". Handle it.
806 (top level): Add initial_load cmdline/file axis.
808 2014-06-12 Tom Tromey <tromey@redhat.com>
810 * gdb.base/completion.exp: Don't use directory name in test.
812 2014-06-09 Gary Benson <gbenson@redhat.com>
814 * gdb.base/sigall.c [Functions to send signals]: Reorder to
815 separate the always-available ANSI-standard signals from the
816 signals that require checking.
818 * gdb.reverse/sigall-reverse.c [Functions to send signals]:
822 2014-06-07 Keith Seitz <keiths@redhat.com>
826 * gdb.cp/var-tag.cc: New file.
827 * gdb.cp/var-tag.exp: New file.
828 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
829 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
830 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
831 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
833 2014-06-06 Doug Evans <xdje42@gmail.com>
835 * gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3.
837 2014-06-06 Pedro Alves <palves@redhat.com>
839 * gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step)
840 in target debug output instead of looking at RSP packets,
841 disabling the test on any target that uses hardware stepping.
844 2014-06-06 Pedro Alves <palves@redhat.com>
846 * gdb.base/break-unload-file.exp: Fix typo.
848 2014-06-06 Yao Qi <yao@codesourcery.com>
850 * gdb.base/jit.exp (one_jit_test): Restrict the pattern
851 from "jit_function" to "^jit_function".
853 2014-06-06 Yao Qi <yao@codesourcery.com>
855 * gdb.base/async.c (foo): Add one statement.
856 * gdb.base/async.exp: Get the next instruction address and
857 match the output of "nexti" by instruction address. Match
858 the hex address in the output of "finish".
860 2014-06-06 Gary Benson <gbenson@redhat.com>
862 * gdb.base/call-signals.c: Remove preprocessor conditionals
863 for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE,
865 * gdb.base/sigall.c: Likewise.
866 * gdb.base/unwindonsignal.c: Likewise.
867 * gdb.reverse/sigall-reverse.c: Likewise.
869 2014-06-06 Yao Qi <yao@codesourcery.com>
871 * gdb.base/hbreak-unmapped.exp: Read memory at address 0. If
872 readable, skip the test.
874 2014-06-06 Yao Qi <yao@codesourcery.com>
876 * gdb.threads/staticthreads.c (thread_function): Move the line
877 setting breakpoint on forward.
878 * gdb.threads/staticthreads.exp: Update comments.
880 2014-06-05 Ludovic Courtès <ludo@gnu.org>
882 * gdb.guile/scm-value.exp (test_value_in_inferior): Add test
883 "history-append! type error".
885 2014-06-05 Simon Marchi <simon.marchi@ericsson.com>
887 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix
888 erroneous dprintf expected input.
890 2014-06-04 Doug Evans <xdje42@gmail.com>
892 * gdb.guile/scm-generics.exp: Delete.
894 2014-06-04 Doug Evans <xdje42@gmail.com>
896 * gdb.guile/scm-breakpoint.exp: Update.
897 Add tests for breakpoint registration.
899 2014-06-04 Tom Tromey <tromey@redhat.com>
901 * gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
903 * gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
904 inner_vla_struct, vla_union types. Initialize objects of those
905 types and compute their sizes.
907 2014-06-04 Nathan Sidwell <nathan@codesourcery.com>
908 Hui Zhu <hui@codesourcery.com>
910 * gdb.base/fileio.exp: Add test for shell not available as well as
912 * gdb.base/fileio.c (test_system): Check for shell twice.
914 2014-06-04 Yao Qi <yao@codesourcery.com>
916 * gdb.base/auto-connect-native-target.exp: Remove redundant
917 space from the regexp pattern.
919 2014-06-04 Yao Qi <yao@codesourcery.com>
921 * gdb.base/default.exp: Replace "child" with "native" in
924 2014-06-03 Siva Chandra Reddy <sivachandra@google.com>
926 * gdb.python/py-xmethods.cc: New testcase to test xmethods.
927 * gdb.python/py-xmethods.exp: New tests to test xmethods.
928 * gdb.python/py-xmethods.py: Python script supporting the
929 new testcase and tests.
931 2014-06-03 Joel Brobecker <brobecker@adacore.com>
932 Pedro Alves <palves@redhat.com>
935 * gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
936 * gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.
938 2014-06-03 Brad Mouring <bmouring@ni.com> (tiny patch)
940 * gdb.base/subst.exp: Add tests to verify partial path matching
943 2014-06-03 Pedro Alves <palves@redhat.com>
945 * gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote
946 target that doesn't use software single-stepping.
948 2014-06-03 Pedro Alves <palves@redhat.com>
951 * gdb.base/sss-bp-on-user-bp-2.c: New file.
952 * gdb.base/sss-bp-on-user-bp-2.exp: New file.
954 2014-06-02 Doug Evans <xdje42@gmail.com>
956 * gdb.guile/scm-parameter.exp: New file.
958 2014-06-02 Doug Evans <xdje42@gmail.com>
960 * gdb.guile/scm-cmd.c: New file.
961 * gdb.guile/scm-cmd.exp: New file.
963 2014-06-02 Doug Evans <xdje42@gmail.com>
965 * gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace
966 pretty-printer lookup.
967 * gdb.guile/scm-pretty-print.scm (pp_s-printer): New function.
968 (make-pp_s-printer): Call it.
969 (make-pretty-printer-from-dict): New function.
970 (lookup-pretty-printer-maker-from-dict): New function.
971 (*pretty-printer*): Simplify.
972 (make-objfile-pp_s-printer): New function.
973 (install-objfile-pretty-printers!): New function.
974 (make-progspace-pp_s-printer): New function.
975 (install-progspace-pretty-printers!): New function.
976 * gdb.guile/scm-progspace.c: New file.
977 * gdb.guile/scm-progspace.exp: New file.
979 2014-06-02 Pedro Alves <palves@redhat.com>
981 * gdb.base/dprintf-bp-same-addr.c: New file.
982 * gdb.base/dprintf-bp-same-addr.exp: New file.
984 2014-06-02 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
986 * gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase.
987 * gdb.arch/powerpc-power.s: Likewise.
989 2014-06-02 Joel Brobecker <brobecker@adacore.com>
991 * gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT.
993 2014-06-01 Yao Qi <yao@codesourcery.com>
995 * gdb.base/watchpoint.exp (test_watch_location): Check null
996 pointer can be dereferenced. If not, do the test, otherwise
999 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
1001 * gdb.arch/amd64-invalid-stack-middle.exp: Update expected
1003 * gdb.arch/amd64-invalid-stack-top.exp: Likewise.
1005 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
1007 * gdb.arch/amd64-invalid-stack-middle.S: New file.
1008 * gdb.arch/amd64-invalid-stack-middle.c: New file.
1009 * gdb.arch/amd64-invalid-stack-middle.exp: New file.
1010 * gdb.arch/amd64-invalid-stack-top.c: New file.
1011 * gdb.arch/amd64-invalid-stack-top.exp: New file.
1013 2014-05-30 Pedro Alves <palves@redhat.com>
1015 PR breakpoints/17000
1016 * gdb.base/sss-bp-on-user-bp.c: New file.
1017 * gdb.base/sss-bp-on-user-bp.exp: New file.
1019 2014-05-30 David Blaikie <dblaikie@gmail.com>
1021 * gdb.opt/inline-break.c: Fix clang compatibility by specifying
1022 gnu_inline semantics via attribute.
1023 * gdb.opt/inline-break.exp: Remove -std=c89 now that the test
1024 source explicitly specifies the required semantics.
1026 2014-05-30 Maciej W. Rozycki <macro@codesourcery.com>
1028 * gdb.reverse/sigall-reverse.exp: Fix a typo.
1030 2014-05-29 Pedro Alves <palves@redhat.com>
1031 Tom Tromey <tromey@redhat.com>
1033 * gdb.base/async-shell.exp: Don't enable target-async.
1034 * gdb.base/async.exp
1035 * gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
1037 (top level): Don't test with "target-async".
1038 * gdb.base/dprintf-non-stop.exp: Don't enable target-async.
1039 * gdb.base/gdb-sigterm.exp: Don't test with "target-async".
1040 * gdb.base/inferior-died.exp: Don't enable target-async.
1041 * gdb.base/interrupt-noterm.exp: Likewise.
1042 * gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
1043 * gdb.mi/mi-nonstop-exit.exp: Likewise.
1044 * gdb.mi/mi-nonstop.exp: Likewise.
1045 * gdb.mi/mi-ns-stale-regcache.exp: Likewise.
1046 * gdb.mi/mi-nsintrall.exp: Likewise.
1047 * gdb.mi/mi-nsmoribund.exp: Likewise.
1048 * gdb.mi/mi-nsthrexec.exp: Likewise.
1049 * gdb.mi/mi-watch-nonstop.exp: Likewise.
1050 * gdb.multi/watchpoint-multi.exp: Adjust comment.
1051 * gdb.python/py-evsignal.exp: Don't enable target-async.
1052 * gdb.python/py-evthreads.exp: Likewise.
1053 * gdb.python/py-prompt.exp: Likewise.
1054 * gdb.reverse/break-precsave.exp: Don't test with "target-async".
1055 * gdb.server/solib-list.exp: Don't enable target-async.
1056 * gdb.threads/thread-specific-bp.exp: Likewise.
1057 * lib/mi-support.exp: Adjust to use mi-async.
1059 2014-05-29 Pedro Alves <palves@redhat.com>
1062 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
1063 reason, even in sync mode.
1065 2014-05-29 Pedro Alves <palves@redhat.com>
1066 Hui Zhu <hui@codesourcery.com>
1069 * gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
1070 * gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
1071 * gdb.mi/mi-condbreak-call-thr-state.c: New file.
1072 * gdb.mi/mi-condbreak-call-thr-state.exp: New file.
1074 2014-05-28 Joel Brobecker <brobecker@adacore.com>
1076 * config/monitor.exp (gdb_target_monitor): Replace use of
1077 "set remotebaud" by "set serial baud".
1079 2014-05-26 Andy Wingo <wingo@igalia.com>
1081 * gdb.guile/scm-breakpoint.exp:
1082 * gdb.guile/scm-gsmob.exp: Update to use plain old object
1083 properties instead of gdb-object-properties.
1085 2014-05-26 Yao Qi <yao@codesourcery.com>
1087 * gdb.server/no-thread-db.exp: Specify source file name
1088 explicitly when setting a breakpoint.
1090 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
1092 * gdb.btrace/vdso.c: New.
1093 * gdb.btrace/vdso.exp: New.
1095 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
1097 * gdb.base/gcore.exp (capture_command_output): Move ...
1098 * lib/gdb.exp (capture_command_output): ... here.
1100 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
1102 * gdb.btrace/data.exp: Test memory access during btrace replay.
1104 2014-05-22 Simon Marchi <simon.marchi@ericsson.com>
1106 * lib/mi-support.exp (mi_run_cmd_full): Add comments.
1108 2014-05-21 Pedro Alves <palves@redhat.com>
1111 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
1112 (top level): Test that output related to execution commands is
1113 sent to the console with CLI commands, but not with MI commands.
1114 Test that breakpoint events are always mirrored to the console.
1115 Also expect the new source line to be output after a "next" in
1116 async mode too. Make it a pass/fail test.
1117 * gdb.mi/mi-solib.exp: Test that the CLI solib event note is
1119 * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
1121 2014-05-21 Pedro Alves <palves@redhat.com>
1123 * gdb.base/list.exp (build_pattern, test_list): New procedures.
1124 Use them to test variations of "list" after reaching a breakpoint.
1125 * gdb.mi/mi-cli.exp (line_main_callme_2): New global.
1126 Test "list" with listsize 10 after reaching a breakpoint.
1127 * gdb.python/python.exp (decode_line current location line
1128 number): Adjust expected line number.
1130 2014-05-21 Simon Marchi <simon.marchi@ericsson.com>
1132 * lib/mi-support.exp (mi_run_cmd_full): Revert to original
1133 behavior for $args, pass it directly to "run".
1135 2014-05-21 Maciej W. Rozycki <macro@codesourcery.com>
1137 * lib/gdb.exp (default_gdb_init): Bump `match_max' up from
1140 2014-05-21 Pedro Alves <palves@redhat.com>
1142 * boards/gdbserver-base.exp (GDBFLAGS): Set to "set
1143 auto-connect-native-target off".
1144 * gdb.base/auto-connect-native-target.c: New file.
1145 * gdb.base/auto-connect-native-target.exp: New file.
1147 2014-05-21 Pedro Alves <palves@redhat.com>
1149 * gdb.base/default.exp: Test "target native" instead of "target
1152 2014-05-21 Mark Wielaard <mjw@redhat.com>
1154 * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.
1156 2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
1158 Fix TLS access for -static -pthread.
1159 * gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
1160 <HAVE_TLS> (thread_function, main): Initialize it.
1161 * gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
1163 <$have_tls != "">: Check TLSVAR.
1165 2014-05-21 Pedro Alves <palves@redhat.com>
1167 * gdb.base/dcache-line-read-error.c: New.
1168 * gdb.base/dcache-line-read-error.exp: New.
1170 2014-05-20 Pedro Alves <palves@redhat.com>
1172 * gdb.base/compare-sections.c: New file.
1173 * gdb.base/compare-sections.exp: New file.
1175 2014-05-20 Pedro Alves <palves@redhat.com>
1177 * gdb.base/break-idempotent.c: New file.
1178 * gdb.base/break-idempotent.exp: New file.
1180 2014-05-20 Markus Metzger <markus.t.metzger@intel.com>
1182 * gdb.btrace/nohist.exp: New.
1184 2014-05-20 Yao Qi <yao@codesourcery.com>
1186 * lib/gdb.exp (gdb_init): Set timeout if test file is under
1187 gdb.reverse directory and gdb_reverse_timeout exists in board
1189 * README: Document gdb_reverse_timeout.
1191 2014-05-20 Yao Qi <yao@codesourcery.com>
1193 * lib/gdb.exp (default_gdb_init): Rename argument 'args' by
1194 'test_file_name'. Treat args as a string instead of a list.
1195 (gdb_init): Rename argument 'args' by 'test_file_name'.
1197 2014-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
1199 * gdb.arch/powerpc-power.exp: New file.
1200 * gdb.arch/powerpc-power.s: New file.
1202 2014-05-16 Doug Evans <dje@google.com>
1204 * gdb.base/Makefile.in (EXECUTABLES): Add completion.
1205 * gdb.base/completion.exp: Check that all expected files exist
1206 before doing file completion.
1208 2014-05-16 Doug Evans <dje@google.com>
1210 * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
1212 (do_syscall_tests_without_xml): Update.
1214 2014-05-16 Pedro Alves <palves@redhat.com>
1216 * lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
1217 instead of "unknown output after running".
1219 2014-05-16 Yao Qi <yao@codesourcery.com>
1221 * gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host. Remove
1222 file1.txt from host at the end.
1223 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
1225 2014-05-15 Doug Evans <dje@google.com>
1227 * gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path.
1228 * gdb.dwarf2/fission-reread.exp: Set debug-file-directory before
1229 loading file. Add test for TU lookup.
1231 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
1233 * lib/mi-support.exp (mi_run_cmd_full): Set arguments by
1234 calling "-exec-arguments" or "set args" before running the
1237 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
1239 * lib/mi-support.exp (mi_expect_stop): Expect message for
1240 inferiors that exit with non-zero exit code.
1242 2014-05-14 Yao Qi <yao@codesourcery.com>
1244 * gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't
1245 match absolute path on remote host.
1246 (test_file_list_exec_source_files): Remove "/" from the
1249 2014-05-14 Yao Qi <yao@codesourcery.com>
1251 * boards/local-remote-host-notty.exp (${board}_file): New
1254 2014-05-07 Kyle McMartin <kyle@redhat.com>
1256 Pushed by Joel Brobecker <brobecker@adacore.com>.
1257 * gdb.arch/aarch64-atomic-inst.c: New file.
1258 * gdb.arch/aarch64-atomic-inst.exp: New file.
1260 2014-05-07 Yao Qi <yao@codesourcery.com>
1262 * gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int"
1263 in current context" too.
1265 2014-05-05 Keith Seitz <keiths@redhat.com>
1267 * gdb.linespec/ls-dollar.exp: Add test for linespec
1268 file:convenience_variable.
1270 2014-05-05 Yao Qi <yao@codesourcery.com>
1272 * gdb.trace/unavailable.exp (gdb_collect_args_test): Save
1273 traceframes into tfile and ctf trace files. Read data from
1274 trace file and test collected data.
1275 (gdb_collect_locals_test): Likewise.
1276 (gdb_unavailable_registers_test): Likewise.
1277 (gdb_unavailable_floats): Likewise.
1278 (gdb_collect_globals_test): Likewise.
1279 (top-level): Append "ctf" to trace_file_targets if GDB
1282 2014-05-05 Yao Qi <yao@codesourcery.com>
1284 * gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
1286 (gdb_collect_args_test_1): ... it. New proc.
1287 (gdb_collect_locals_test): Move some code to ...
1288 (gdb_collect_locals_test_1): ... it. New proc.
1289 (gdb_unavailable_registers_test): Move some code to ...
1290 (gdb_unavailable_registers_test_1): ... it. New proc.
1291 (gdb_unavailable_floats): Move some code to ...
1292 (gdb_unavailable_floats_1): ... it. New proc.
1294 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
1296 * gdb.arch/amd64-stap-optional-prefix.S (main): Add several
1297 probes to test for bitness recognition.
1298 * gdb.arch/amd64-stap-optional-prefix.exp
1299 (test_probe_value_without_reg): New procedure.
1300 Add code to test for different kinds of bitness.
1302 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
1304 PR breakpoints/16889
1305 * gdb.arch/amd64-stap-optional-prefix.S: New file.
1306 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
1308 2014-05-01 Pedro Alves <palves@redhat.com>
1310 * lib/gdb.exp (gdb_load): Extend comment. Skip calling
1311 gdb_file_cmd if no file is specified.
1312 * boards/native-extended-gdbserver.exp (gdb_load): Use the
1313 last_loaded_file to set the remote exec-file.
1315 2014-05-01 Pedro Alves <palves@redhat.com>
1317 * boards/local-remote-host.exp: New file.
1319 2014-05-01 Pedro Alves <palves@redhat.com>
1321 * boards/local-remote-host.exp: Rename to ...
1322 * boards/local-remote-host-notty.exp: ... this.
1324 2014-04-28 Joel Brobecker <brobecker@adacore.com>
1326 * gdb.ada/dyn_arrayidx: New testcase.
1328 2014-04-26 Yao Qi <yao@codesourcery.com>
1330 * gdb.dwarf2/dwz.exp: Compile main.c to object. Restart GDB
1331 and compute the length of function main. Save it in
1333 (Dwarf::assemble): Use $main_length instead of hard-coded 10.
1334 (top-level): Use gdb_compile to compile objects into
1335 executable and restart GDB. Remove invocation to
1336 prepare_for_testing.
1338 2014-04-25 Simon Marchi <simon.marchi@ericsson.com>
1339 Pedro Alves <palves@redhat.com>
1342 * gdb.multi/multi-attach.c: New file.
1343 * gdb.multi/multi-attach.exp: New file.
1345 2014-04-25 Pedro Alves <palves@redhat.com>
1347 * gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
1349 (top level): Test that "set remote conditional-breakpoints-packet
1350 off" works as intended.
1351 * gdb.base/dprintf.exp: Test that "set remote
1352 breakpoint-commands-packet off" works as intended.
1353 * gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
1355 (top level): Call it.
1356 * gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
1357 remote fast-tracepoints-packet off" works as intended.
1358 * gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
1359 * lib/gdb.exp (gdb_is_target_remote): ... here.
1361 2014-04-24 David Blaikie <dblaikie@gmail.com>
1363 * gdb.base/catch-syscall.c: Make unreferenced statics non-static to
1364 ensure clang would not discard them.
1365 * gdb.base/gdbvars.c: Ditto.
1366 * gdb.base/memattr.c: Ditto.
1367 * gdb.base/whatis.c: Ditto.
1368 * gdb.python/py-prettyprint.c: Ditto.
1369 * gdb.trace/actions.c: Ditto.
1370 * gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
1371 ensure clang would not discard it.
1373 2014-04-24 David Blaikie <dblaikie@gmail.com>
1375 * gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
1376 clang to emit the full definition of type required by the test
1377 * gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
1379 2014-04-24 David Blaikie <dblaikie@gmail.com>
1381 * gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to
1382 coax Clang into emitting the definition of the type.
1383 * gdb.cp/pr10728-x.h (y): Ditto.
1384 * gdb.cp/pr10728-y.cc (y): Ditto.
1386 2014-04-24 David Blaikie <dblaikie@gmail.com>
1388 * gdb.base/label.exp: XFAIL label related tests under Clang.
1389 * gdb.cp/cplabel.exp: Ditto.
1390 * gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL
1391 under Clang those using labels.
1393 2014-04-25 Yao Qi <yao@codesourcery.com>
1395 * gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
1397 * gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
1398 partial_label and double_label.
1400 2014-04-24 David Blaikie <dblaikie@gmail.com>
1402 * gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.
1404 2014-04-24 David Blaikie <dblaikie@gmail.com>
1406 * gdb.cp/cpexprs.cc: Move braces to the same line as the start
1407 of the function to work across GCC and Clang.
1408 * gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
1409 pointer types (const void ** const V void **).
1411 2014-04-24 Michael Sturm <michael.sturm@mintel.com>
1412 Walfred Tedeschi <walfred.tedeschi@intel.com>
1414 * Makefile.in (EXECUTABLES): Added i386-avx512.
1415 * gdb.arch/i386-avx512.c: New file.
1416 * gdb.arch/i386-avx512.exp: Likewise.
1418 2014-04-23 Keith Seitz <keiths@redhat.com>
1420 * lib/mi-support.exp (mi_list_breakpoints): Delete.
1421 (mi_make_breakpoint_table): New procedure.
1422 (mi_create_breakpoint): Use mi_make_breakpoint
1423 and return the result.
1424 (mi_make_breakpoint): New procedure.
1425 (mi_build_kv_pairs): New procedure.
1427 * gdb.mi/mi-break.exp: Remove unused globals,
1428 update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
1429 All callers updated.
1430 * gdb.mi/mi-dprintf.exp: Use variable to track command
1432 Update all callers of mi_create_breakpoint and use
1433 mi_make_breakpoint_table.
1434 Remove any unused global variables.
1435 * gdb.mi/mi-nonstop.exp: Likewise.
1436 * gdb.mi/mi-nsintrall.exp: Likewise.
1437 * gdb.mi/mi-nsmoribund.exp: Likewise.
1438 * gdb.mi/mi-nsthrexec.exp: Likewise.
1439 * gdb.mi/mi-reverse.exp: Likewise.
1440 * gdb.mi/mi-simplerun.exp: Likewise.
1441 * gdb.mi/mi-stepn.exp: Likewise.
1442 * gdb.mi/mi-syn-frame.exp: Likewise.
1443 * gdb.mi/mi-until.exp: Likewise.
1444 * gdb.mi/mi-var-cp.exp: Likewise.
1445 * gdb.mi/mi-var-display.exp: Likewise.
1446 * gdb.mi/mi2-amd64-entry-value.exp: Likewise.
1447 * gdb.mi/mi2-var-child.exp: Likewise.
1448 * gdb.mi/mi-vla-c99.exp: Likewise.
1449 * lib/mi-support.exp: Likewise.
1451 From Ian Lance Taylor <iant@cygnus.com>:
1452 * lib/gdb.exp (parse_args): New procedure.
1454 2014-04-23 Pedro Alves <palves@redhat.com>
1456 * gdb.base/break-unload-file.c: New file.
1457 * gdb.base/break-unload-file.exp: New file.
1458 * gdb.base/sym-file-lib.c (baz): New function.
1459 * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
1461 (load): Store the segment's mapped size.
1462 (unload): New function.
1463 (unload_shlib): New function.
1464 * gdb.base/sym-file-loader.h (unload_shlib): New declaration.
1465 * gdb.base/sym-file-main.c (main): Unload, and reload the library,
1466 set a breakpoint at baz, and call it.
1467 * gdb.base/sym-file.exp: New tests for stale breakpoint
1470 2014-04-23 Pedro Alves <palves@redhat.com>
1472 * gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
1473 * gdb.base/hbreak-in-shr-unsupported.c: New file.
1474 * gdb.base/hbreak-in-shr-unsupported.exp: New file.
1475 * gdb.base/hbreak-unmapped.c: New file.
1476 * gdb.base/hbreak-unmapped.exp: New file.
1477 * gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
1478 * lib/gdb.exp (gdb_is_target_remote): ... here.
1480 2014-04-22 Pedro Alves <palves@redhat.com>
1482 * gdb.base/consecutive-step-over.c: New file.
1483 * gdb.base/consecutive-step-over.exp: New file.
1485 2014-04-22 Pedro Alves <palves@redhat.com>
1487 * lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
1488 instead of send_gdb/gdb_expect.
1490 2014-04-22 Yao Qi <yao@codesourcery.com>
1492 * lib/trace-support.exp (generate_tracefile): New procedure.
1493 * gdb.trace/tfile.exp: Skip the test if generate_tracefile
1495 * gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
1496 if generate_tracefile returns 1.
1498 2014-04-18 Tom Tromey <palves@redhat.com>
1499 Pedro alves <tromey@redhat.com>
1502 * gdb.opt/inline-bt.exp: Test backtracing from an inline function
1503 with a backtrace limit.
1504 * gdb.python/py-frame-inline.exp: Test running to an inline
1505 function with a backtrace limit, and printing the newest frame.
1506 * gdb.python/py-frame-inline.c (main): Call f.
1508 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
1510 * gdb.java/jnpe.exp: Drop srcdir from untested path.
1512 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
1514 * lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc):
1515 Drop prefix from unsupported source file path.
1517 2014-04-17 Yao Qi <yao@codesourcery.com>
1519 * lib/gdb.exp (with_target_charset): New proc.
1520 * gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
1521 with_target_charset.
1522 (test_print_strings): Likewise.
1523 (test_repeat_bytes): Likewise.
1524 * gdb.base/setvar.exp: Set target-charset to ASCII temporarily
1527 2014-04-16 Keith Seitz <keiths@redhat.com>
1530 * gdb.dwarf2/corrupt.c: New file.
1531 * gdb.dwarf2/corrupt.exp: New file.
1533 2014-04-16 Keith Seitz <keiths@redhat.com>
1536 * gdb.cp/namelessclass.cc: New file.
1537 * gdb.cp/namelessclass.exp: New file.
1538 * gdb.cp/namelessclass.S: New file.
1540 2014-04-16 Doug Evans <dje@google.com>
1542 * lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
1544 (gdbserver_default_get_comm_port): New function.
1545 (gdbserver_start): Check if board file provided
1546 "gdbserver,get_comm_port" and use it if so.
1547 * boards/native-stdio-gdbserver.exp (sockethost): Set to "".
1548 (gdb,socketport): Set to "stdio".
1549 (gdbserver,get_comm_port): Set to ${board}_get_comm_port.
1550 (stdio_gdbserver_template): Delete.
1551 (${board}_get_remote_address): Update.
1552 (${board}_build_remote_cmd): Delete.
1553 (${board}_get_comm_port): New function.
1554 (${board}_spawn): Update.
1555 * boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
1557 (${board}_get_remote_address): Update.
1558 (${board}_get_comm_port): New function.
1560 2014-04-16 Andrew Burgess <aburgess@broadcom.com>
1562 * gdb.base/memattr.exp: Improve regexps to handle memory regions
1563 appearing in any order.
1565 2014-04-15 Doug Evans <dje@google.com>
1567 * gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference
1568 uninitialized value of "description".
1570 2014-04-15 Keith Seitz <keiths@redhat.com>
1572 * gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing):
1573 Remove unused globals.
1574 (test_running_the_program): Likewise.
1575 (test_controlled_execution): Likewise.
1576 (test_controlling_breakpoints): Likewise.
1577 (test_program_termination): Likewise.
1579 2014-04-15 Keith Seitz <keiths@redhat.com>
1581 * gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove
1583 (test_rbreak_creation_and_listing): Likewise.
1584 (test_ignore_count): Likewise.
1585 (test_error): Likewise.
1587 2014-04-15 Pedro Alves <palves@redhat.com>
1589 * gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
1590 <ansidecl.h>, <elf/common.h> and <elf/external.h> to
1592 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
1593 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
1594 to sym-file-loader.c.
1595 (struct library): Forward declare.
1596 (load_shlib, lookup_function): Change prototypes.
1597 (find_shstrtab, find_strtab, find_shdr, find_symtab)
1598 (translate_offset): Remove declarations.
1599 (get_text_addr): New declaration.
1600 * gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
1601 <ansidecl.h>, <elf/common.h> and <elf/external.h> here from
1603 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
1604 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
1605 here from sym-file-loader.h.
1606 (struct library): New structure.
1607 (load_shlib, lookup_function): Change prototypes and adjust to
1608 work with a struct library.
1609 (find_shstrtab, find_strtab, find_shdr, find_symtab)
1610 (translate_offset): Make static.
1611 (get_text_addr): New function.
1612 * gdb.base/sym-file-main.c (main): Adjust to new loader interface.
1614 2014-04-15 Pedro Alves <palves@redhat.com>
1616 * gdb.base/sym-file-loader.c: Fix typo. SELF_LINK, not SELK_LINK.
1618 2014-04-15 Pedro Alves <palves@redhat.com>
1620 * gdb.base/sym-file-loader.c: Include <limits.h>.
1621 (SELF_LINK): New define.
1622 (get_origin): New function.
1623 (load_shlib): Use it.
1624 * gdb.base/sym-file.exp: Don't early return if the target is
1625 remote. Use runto_main, and issue fail is that fails. Use
1627 (shlib_name): Delete.
1628 (lib_so, lib_syms, lib_dlopen): New globals. Use them throughout.
1630 2014-04-15 Pedro Alves <palves@redhat.com>
1632 * gdb.base/sym-file.exp: Remove regex characters from test
1633 message. Don't refer to breakpoint numbers in test messages.
1635 2014-04-14 Keith Seitz <keiths@redhat.com>
1638 * gdb.cp/var-tag.cc: New file.
1639 * gdb.cp/var-tag.exp: New file.
1640 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
1641 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
1642 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
1643 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
1645 2014-04-14 Tom Tromey <tromey@redhat.com>
1647 * gdb.cp/classes.exp (test_enums): Handle underlying type.
1648 * gdb.dwarf2/enum-type.exp: Add test for enum with underlying
1650 * gdb.cp/enum-class.exp: New file.
1651 * gdb.cp/enum-class.cc: New file.
1653 2014-04-14 Tom Tromey <tromey@redhat.com>
1655 * gdb.dwarf2/enum-type.exp: New file.
1657 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
1659 * gdb.mi/mi-vla-c99.exp: New file.
1660 * gdb.mi/vla.c: New file.
1662 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
1664 * gdb.base/vla-datatypes.c: New file.
1665 * gdb.base/vla-datatypes.exp: New file.
1667 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
1669 * gdb.base/vla-ptr.c: New file.
1670 * gdb.base/vla-ptr.exp: New file.
1672 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
1674 * gdb.dwarf2/count.exp: New file.
1676 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
1678 * gdb.base/vla-sideeffect.c: New file.
1679 * gdb.base/vla-sideeffect.exp: New file.
1681 2014-04-14 David Blaikie <dblaikie@gmail.com>
1683 * gdb.mi/non-stop.c: Add return value for non-void function return
1685 * gdb.threads/staticthreads.c: Ditto.
1687 2014-04-12 Siva Chandra Reddy <sivachandra@google.com>
1688 Doug Evans <xdje42@gmail.com>
1690 * gdb.guile/scm-value.c: Improve test case.
1691 * gdb.guile/scm-value.exp: Add new test.
1693 2014-04-11 David Blaikie <dblaikie@gmail.com>
1695 * gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to
1696 override Clang's default.
1698 2014-04-11 Joel Brobecker <brobecker@adacore.com>
1700 Revert the following changes (regressions):
1702 * gdb.base/vla-sideeffect.c: New file.
1703 * gdb.base/vla-sideeffect.exp: New file.
1705 * gdb.dwarf2/count.exp: New file.
1707 * gdb.base/vla-multi.c: New file.
1708 * gdb.base/vla-multi.exp: New file.
1710 * gdb.base/vla-ptr.c: New file.
1711 * gdb.base/vla-ptr.exp: New file.
1713 * gdb.base/vla-datatypes.c: New file.
1714 * gdb.base/vla-datatypes.exp: New file.
1716 * gdb.mi/mi-vla-c99.exp: New file.
1717 * gdb.mi/vla.c: New file.
1719 2014-04-11 Keith Seitz <keiths@redhat.com>
1722 * gdb.cp/cpsizeof.exp: New file.
1723 * gdb.cp/cpsizeof.cc: New file.
1725 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
1727 * gdb.mi/mi-vla-c99.exp: New file.
1728 * gdb.mi/vla.c: New file.
1730 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
1732 * gdb.base/vla-datatypes.c: New file.
1733 * gdb.base/vla-datatypes.exp: New file.
1735 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
1737 * gdb.base/vla-ptr.c: New file.
1738 * gdb.base/vla-ptr.exp: New file.
1740 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
1742 * gdb.base/vla-multi.c: New file.
1743 * gdb.base/vla-multi.exp: New file.
1745 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
1747 * gdb.dwarf2/count.exp: New file.
1749 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
1751 * gdb.base/vla-sideeffect.c: New file.
1752 * gdb.base/vla-sideeffect.exp: New file.
1754 2014-04-11 Yao Qi <yao@codesourcery.com>
1756 * gdb.base/completion.exp: Check file exists before running tests
1759 2014-04-10 Pedro Alves <palves@redhat.com>
1761 * gdb.base/cond-eval-mode.c: New file.
1762 * gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust
1763 prepare_for_testing to build the new file. Check result of
1765 (test_break, test_watch): New procedures.
1766 (top level): Use them.
1768 2014-04-08 Pierre Muller <muller@sourceware.org>
1770 * gdb.base/printcmds.exp (test_artificial_arrays): Disable
1771 Ctrl-V use for mingw hosts.
1773 2014-04-07 Siva Chandra Reddy <sivachandra@google.com>
1775 * gdb.python/py-value.c: Improve test case.
1776 * gdb.python/py-value.exp: Add new test.
1778 2014-04-07 David Blaikie <dblaikie@gmail.com>
1780 * lib/compiler.c: Identify the clang compiler.
1781 * lib/compiler.cc: Ditto.
1783 2014-04-03 Yao Qi <yao@codesourcery.com>
1785 * gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.
1787 2014-04-01 Anton Blanchard <anton@samba.org>
1789 * gdb.arch/ppc64-atomic-inst.exp: Use untested. Make test
1792 2014-04-01 Anton Blanchard <anton@samba.org>
1794 * gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile,
1795 prepare_for_testing.
1797 2014-04-01 Anton Blanchard <anton@samba.org>
1799 * gdb.arch/ppc64-atomic-inst.c: Remove.
1800 * gdb.arch/ppc64-atomic-inst.S: New file.
1801 * gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
1803 2014-03-31 Doug Evans <dje@google.com>
1805 * gdb.base/print-symbol-loading-lib.c: New file.
1806 * gdb.base/print-symbol-loading-main.c: New file.
1807 * gdb.base/print-symbol-loading.exp: New file.
1809 2014-03-31 Yao Qi <yao@codesourcery.com>
1811 * gdb.base/source-dir.exp: Allow ';' as a directory separator.
1813 2014-03-28 Joel Brobecker <brobecker@adacore.com>
1815 * gdb.ada/mi_dyn_arr: New testcase.
1817 2014-03-27 Doug Evans <dje@google.com>
1819 * gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug".
1821 2014-03-27 Yao Qi <yao@codesourcery.com>
1823 * lib/gdb.exp (can_single_step_to_signal_handler): Return zero
1824 if target is nios2-*-*.
1826 2014-03-26 Yao Qi <yao@codesourcery.com>
1828 * lib/gdb.exp (readline_is_used): New proc.
1829 * gdb.base/completion.exp: Move tests on command complete up.
1830 Skip the rest of tests if readline is not used.
1831 * gdb.ada/complete.exp: Skp the test if readline is not
1833 * gdb.base/filesym.exp: Likewise.
1834 * gdb.base/macscp.exp: Likewise.
1835 * gdb.base/readline-ask.exp: Likewise.
1836 * gdb.base/readline.exp: Likewise.
1837 * gdb.python/py-cmd.exp: Likewise.
1838 * gdb.trace/tfile.exp: Likewise.
1840 2014-03-26 Yao Qi <yao@codesourcery.com>
1842 * gdb.base/macscp.exp: Fix code format issues.
1844 2014-03-25 Ulrich Weigand <uweigand@de.ibm.com>
1846 * gdb.asm/asm-source.exp: Handle powerpc64le-* targets.
1847 * gdb.asm/powerpc64le.inc: New file.
1849 2014-03-25 Pedro Alves <palves@redhat.com>
1850 Doug Evans <dje@google.com>
1852 * gdb.base/source-execution.c: New file.
1853 * gdb.base/source-execution.exp: New file.
1854 * gdb.base/source-execution.gdb: New file.
1856 2014-03-24 Doug Evans <dje@google.com>
1858 * gdb.linespec/macro-relative.exp: Mark the test as unsupported if
1861 2014-03-24 Hui Zhu <hui@codesourcery.com>
1862 Pedro Alves <palves@redhat.com>
1864 PR breakpoints/16101
1865 * gdb.base/dprintf.exp: Use unsupported rather than changing the
1866 test pass/fail messages. Detect missing support for dprintf when
1867 breakpoints are actually inserted.
1868 * gdb.base/mi-dprintf.exp: Detect missing support for dprintf when
1869 breakpoints are actually inserted.
1870 * lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue
1873 2014-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
1875 * gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1".
1877 2014-03-22 Doug Evans <xdje42@gmail.com>
1879 * gdb.python/python.exp (python not supported): Verify multi-line
1880 python command issues an error.
1881 * gdb.guile/guile.exp (guile not supported): Verify multi-line
1882 guile command issues an error.
1884 2014-03-21 Maciej W. Rozycki <macro@codesourcery.com>
1886 * gdb.threads/thread-specific.exp: Handle the lack of usable
1887 $this_breakpoint and $this_thread.
1889 2014-03-21 Hui Zhu <hui@codesourcery.com>
1891 * gdb.base/attach.exp (do_command_attach_tests): New.
1893 2014-03-20 Tom Tromey <tromey@redhat.com>
1894 Pedro Alves <palves@redhat.com>
1897 * gdb.base/condbreak-call-false.c: New file.
1898 * gdb.base/condbreak-call-false.exp: New file.
1900 2014-03-20 Pedro Alves <palves@redhat.com>
1902 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid):
1904 (block_signals, unblock_signals): Delete.
1905 (child_function_2, main): Remove references to deleted variable
1908 2014-03-20 Pedro Alves <palves@redhat.com>
1910 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (main):
1911 Use pthread_kill to signal thread 2.
1912 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
1913 Adjust to make the test send itself a signal rather than using the
1914 host's "kill" command.
1916 2014-03-20 Pedro Alves <palves@redhat.com>
1918 * gdb.threads/multiple-step-overs.c: New file.
1919 * gdb.threads/multiple-step-overs.exp: New file.
1920 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
1921 Adjust expected infrun debug output.
1923 2014-03-20 Pedro Alves <palves@redhat.com>
1925 * gdb.threads/step-over-trips-on-watchpoint.c: New file.
1926 * gdb.threads/step-over-trips-on-watchpoint.exp: New file.
1928 2014-03-20 Pedro Alves <palves@redhat.com>
1931 * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
1932 old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
1933 of gdb_test_multiple.
1934 * gdb.cp/annota2.exp: Remove kfail for gdb/38.
1935 * gdb.cp/annota3.exp: Remove kfail for gdb/38.
1937 2014-03-20 Pedro Alves <palves@redhat.com>
1939 * gdb.threads/step-over-lands-on-breakpoint.c: New file.
1940 * gdb.threads/step-over-lands-on-breakpoint.exp: New file.
1942 2014-03-19 Pedro Alves <palves@redhat.com>
1944 * gdb.base/async.exp: Remove early return.
1946 2014-03-19 Pedro Alves <palves@redhat.com>
1948 * gdb.base/async.exp (step& tests): Pass explicit test messages.
1950 2014-03-19 Pedro Alves <palves@redhat.com>
1952 * gdb.base/async.exp (test_background): Expect \r\n after
1953 "completed." in the fail pattern.
1955 2014-03-19 Pedro Alves <palves@redhat.com>
1957 * gdb.base/async.exp (test_background): New procedure.
1958 Use it for all background execution command tests.
1960 2014-03-19 Pedro Alves <palves@redhat.com>
1962 * gdb.base/async.exp: Use prepare_for_testing.
1964 2014-03-19 Pedro Alves <palves@redhat.com>
1966 * gdb.base/async.c (foo): Make 'x' volatile. Write to it twice in
1969 2014-03-19 Pedro Alves <palves@redhat.com>
1971 * gdb.base/async.c (main): Add "jump here" and "until here" line
1973 * gdb.base/async.exp (jump_here): New global.
1974 (jump& test): Use it.
1975 (until_here): New global.
1976 (until& test): Use it.
1978 2014-03-19 Pedro Alves <palves@redhat.com>
1980 * gdb.base/async.exp: Don't frob gdb_protocol.
1982 2014-03-18 Doug Evans <xdje42@gmail.com>
1984 * gdb.base/async.exp: Whitespace fixes. Turn on target-async.
1985 Fix spelling of exec-done-display.
1987 2014-03-18 Jan Kratochvil <jan.kratochvil@redhat.com>
1990 * gdb.base/gdb-sigterm.c: New file.
1991 * gdb.base/gdb-sigterm.exp: New file.
1993 2014-03-18 Pedro Alves <palves@redhat.com>
1996 * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail.
1997 * lib/mi-support.exp (mi_expect_stop): Add special handling for
2000 2014-03-17 Joel Brobecker <brobecker@adacore.com>
2002 * gdb.ada/pckd_arr_ren: New testcase.
2004 2014-03-13 Doug Evans <xdje42@gmail.com>
2007 * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage
2008 collect after discarding symbols.
2010 2014-03-13 Ludovic Courtès <ludo@gnu.org>
2011 Doug Evans <xdje42@gmail.com>
2013 * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added
2014 to history survives a gc.
2016 2014-03-13 Pedro Alves <palves@redhat.com>
2018 * gdb.base/default.exp: Don't test "target procfs".
2020 2014-03-13 Pedro Alves <palves@redhat.com>
2022 * gdb.base/default.exp: Update "target child" and "target procfs"
2023 tests to not expect "Unix".
2025 2014-03-12 Tom Tromey <tromey@redhat.com>
2027 * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
2028 New procs. Add target-async tests.
2029 * gdb.reverse/break-precsave.exp (precsave_tests): New proc.
2030 Add target-async tests.
2032 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
2034 * gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels
2035 'func_start' and 'func_end' for the beginning and end of the
2036 function code, respectively.
2037 * gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and
2038 'func_end' instead of 'func' and 'main'.
2040 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
2042 * gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove.
2043 * gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to
2044 generate the debug info assembler source.
2046 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
2048 * gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'.
2049 * gdb.dwarf2/arr-subrange.exp: Likewise.
2050 * gdb.dwarf2/dwz.exp: Likewise.
2051 * gdb.dwarf2/method-ptr.exp: Likewise.
2052 * gdb.dwarf2/missing-sig-type.exp: Likewise.
2053 * gdb.dwarf2/subrange.exp: Likewise.
2054 * gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'.
2055 * gdb.dwarf2/implptrpiece.exp: Likewise.
2056 * gdb.dwarf2/nostaticblock.exp: Likewise.
2058 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
2060 * lib/gdb.exp (build_executable_from_specs): Don't prepend source
2061 directory to absolute path name arguments.
2063 2014-03-10 Joel Brobecker <brobecker@adacore.com>
2065 * gdb.ada/tagged_access: New testcase.
2067 2014-03-07 Markus Metzger <markus.t.metzger@intel.com>
2069 * gdb.btrace/data.exp: Update expected output.
2071 2014-03-06 Yao Qi <yao@codesourcery.com>
2073 * gdb.trace/pr16508.exp: New file.
2075 2014-03-05 Pedro Alves <palves@redhat.com>
2078 * gdb.base/breakpoint-shadow.exp (compare_disassembly): New
2080 (top level): Adjust to use it. Add tests that exercise breakpoint
2081 interaction with the code-cache.
2083 2014-02-26 Ludovic Courtès <ludo@gnu.org>
2085 * gdb.guile/scm-value.exp (test_value_in_inferior): Add
2086 test for 'history-append!'.
2088 2014-02-26 Joel Brobecker <brobecker@adacore.com>
2090 * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
2091 * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
2092 * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
2093 * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
2094 * gdb.dwarf2/dw2-abs-hi-pc.c: New file.
2095 * gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
2097 2014-02-26 Joel Brobecker <brobecker@adacore.com>
2099 * testsuite/gdb.python/py-pp-re-notag.c: New file.
2100 * testsuite/gdb.python/py-pp-re-notag.ex: New file.
2101 * testsuite/gdb.python/py-pp-re-notag.p: New file.
2103 2014-02-26 Joel Brobecker <brobecker@adacore.com>
2105 * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
2107 2014-02-26 Joel Brobecker <brobecker@adacore.com>
2109 * gdb.dwarf2/arr-stride.c: New file.
2110 * gdb.dwarf2/arr-stride.exp: New file.
2112 2014-02-26 Pedro Alves <palves@redhat.com>
2114 * gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
2115 that won't ever trigger. Make sure that GDB reports the correct
2116 breakpoint that caused the stop.
2118 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2121 * gdb.base/auto-load-script: New file.
2122 * gdb.base/auto-load.c: New file.
2123 * gdb.base/auto-load.exp: New file.
2126 * gdb.base/auto-load.exp: Fix out-of-srctree run.
2128 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
2130 Fix dw2-icycle.exp -fsanitize=address GDB crash.
2131 * gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling.
2133 2014-02-24 Doug Evans <dje@google.com>
2135 * lib/gdb.exp (run_on_host): Log error output if program fails.
2137 2014-02-21 Pedro Alves <palves@redhat.com>
2139 * gdb.threads/step-after-sr-lock.c: Rename to ...
2140 * gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
2141 * gdb.threads/step-after-sr-lock.exp: Rename to ...
2142 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
2145 2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
2148 * gdb.arch/amd64-stap-special-operands.exp: New file.
2149 * gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
2150 * gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
2151 * gdb.arch/amd64-stap-triplet.S: Likewise.
2152 * gdb.arch/amd64-stap-triplet.c: Likewise.
2154 2014-02-20 Joel Brobecker <brobecker@adacore.com>
2156 * gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
2157 in .section pseudo-op.
2159 2014-02-20 lin zuojian <manjian2006@gmail.com>
2160 Joel Brobecker <brobecker@adacore.com>
2161 Doug Evans <xdje42@gmail.com>
2164 * gdb.dwarf2/dw2-icycle.S: New file.
2165 * gdb.dwarf2/dw2-icycle.c: New file.
2166 * gdb.dwarf2/dw2-icycle.exp: New file.
2168 2014-02-19 Siva Chandra Reddy <sivachandra@google.com>
2170 * gdb.python/py-value-cc.cc: Improve test case to enable testing
2171 operations on gdb.Value objects.
2172 * gdb.python/py-value-cc.exp: Add new test to test operations on
2175 2014-02-18 Doug Evans <dje@google.com>
2177 * Makefile.in (TESTS): New variable.
2178 (expanded_tests, expanded_tests_or_none): New variables
2179 (check-single): Pass $(expanded_tests_or_none) to runtest.
2180 (check-parallel): Only run tests in $(TESTS) if non-empty.
2181 (check/no-matching-tests-found): New rule.
2182 * README: Document TESTS makefile variable.
2184 2014-02-18 Doug Evans <dje@google.com>
2186 * Makefile.in (check-parallel): rm -rf outputs temp.
2188 2014-02-16 Jan Kratochvil <jan.kratochvil@redhat.com>
2190 Fix "ERROR: no fileid for" in the testsuite.
2191 * lib/gdb.exp (gdb_finish): Check gdb_spawn_id.
2193 2014-02-12 Doug Evans <dje@google.com>
2195 * gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
2196 (MISCELLANEOUS): New variable.
2197 (clean): rm -rf $(MISCELLANEOUS).
2198 * gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
2199 dwp live in the same directory as symlinks, with each symlink pointed
2200 to a differently named file in a different directory.
2202 2014-02-11 Doug Evans <dje@google.com>
2204 * gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead
2205 of Tcl file commands.
2207 2014-02-10 Mark Kettenis <kettenis@gnu.org>
2209 * gdb.threads/step-after-sr-lock.exp: Avoid executing
2212 2014-02-10 Joel Brobecker <brobecker@adacore.com>
2214 * gdb.ada/tick_length_array_enum_idx: New testcase.
2216 2014-02-10 Doug Evans <xdje42@gmail.com>
2218 * configure.ac (AC_OUTPUT): Add gdb.guile.
2219 * configure: Regenerate.
2220 * lib/gdb-guile.exp: New file.
2221 * lib/gdb.exp (get_target_charset): New function.
2222 * gdb.base/help.exp: Update expected output from "apropos apropos".
2223 * gdb.guile/Makefile.in: New file.
2224 * gdb.guile/guile.exp: New file.
2225 * gdb.guile/scm-arch.c: New file.
2226 * gdb.guile/scm-arch.exp: New file.
2227 * gdb.guile/scm-block.c: New file.
2228 * gdb.guile/scm-block.exp: New file.
2229 * gdb.guile/scm-breakpoint.c: New file.
2230 * gdb.guile/scm-breakpoint.exp: New file.
2231 * gdb.guile/scm-disasm.c: New file.
2232 * gdb.guile/scm-disasm.exp: New file.
2233 * gdb.guile/scm-equal.c: New file.
2234 * gdb.guile/scm-equal.exp: New file.
2235 * gdb.guile/scm-error.exp: New file.
2236 * gdb.guile/scm-error.scm: New file.
2237 * gdb.guile/scm-frame-args.c: New file.
2238 * gdb.guile/scm-frame-args.exp: New file.
2239 * gdb.guile/scm-frame-args.scm: New file.
2240 * gdb.guile/scm-frame-inline.c: New file.
2241 * gdb.guile/scm-frame-inline.exp: New file.
2242 * gdb.guile/scm-frame.c: New file.
2243 * gdb.guile/scm-frame.exp: New file.
2244 * gdb.guile/scm-generics.exp: New file.
2245 * gdb.guile/scm-gsmob.exp: New file.
2246 * gdb.guile/scm-iterator.c: New file.
2247 * gdb.guile/scm-iterator.exp: New file.
2248 * gdb.guile/scm-math.c: New file.
2249 * gdb.guile/scm-math.exp: New file.
2250 * gdb.guile/scm-objfile-script-gdb.in: New file.
2251 * gdb.guile/scm-objfile-script.c: New file.
2252 * gdb.guile/scm-objfile-script.exp: New file.
2253 * gdb.guile/scm-objfile.c: New file.
2254 * gdb.guile/scm-objfile.exp: New file.
2255 * gdb.guile/scm-ports.exp: New file.
2256 * gdb.guile/scm-pretty-print.c: New file.
2257 * gdb.guile/scm-pretty-print.exp: New file.
2258 * gdb.guile/scm-pretty-print.scm: New file.
2259 * gdb.guile/scm-section-script.c: New file.
2260 * gdb.guile/scm-section-script.exp: New file.
2261 * gdb.guile/scm-section-script.scm: New file.
2262 * gdb.guile/scm-symbol.c: New file.
2263 * gdb.guile/scm-symbol.exp: New file.
2264 * gdb.guile/scm-symtab-2.c: New file.
2265 * gdb.guile/scm-symtab.c: New file.
2266 * gdb.guile/scm-symtab.exp: New file.
2267 * gdb.guile/scm-type.c: New file.
2268 * gdb.guile/scm-type.exp: New file.
2269 * gdb.guile/scm-value-cc.cc: New file.
2270 * gdb.guile/scm-value-cc.exp: New file.
2271 * gdb.guile/scm-value.c: New file.
2272 * gdb.guile/scm-value.exp: New file.
2273 * gdb.guile/source2.scm: New file.
2274 * gdb.guile/types-module.cc: New file.
2275 * gdb.guile/types-module.exp: New file.
2277 2014-02-10 Yao Qi <yao@codesourcery.com>
2280 * configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
2281 * configure: Regenerated.
2282 * Makefile.in: New file.
2284 2014-02-08 Andreas Schwab <schwab@linux-m68k.org>
2286 * gdb.python/py-framefilter.exp: Fix typo.
2288 2014-02-08 Yao Qi <yao@codesourcery.com>
2290 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
2291 that no =breakpoint-modified is emitted when breakpoints are
2292 modified through MI commands.
2294 2014-02-07 Pedro Alves <pedro@codesourcery.com>
2295 Pedro Alves <palves@redhat.com>
2297 * gdb.threads/step-after-sr-lock.c: New file.
2298 * gdb.threads/step-after-sr-lock.exp: New file.
2300 2014-02-07 Pedro Alves <palves@redhat.com>
2302 * gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.
2304 2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
2306 Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
2307 * gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
2309 2014-02-06 Doug Evans <xdje42@gmail.com>
2311 * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
2314 * gdb.gdb/python-interrupts.exp: New file.
2316 2014-02-05 Yao Qi <yao@codesourcery.com>
2318 * gdb.trace/report.exp (use_collected_data): Test the output
2319 of "info threads" and "info inferiors".
2321 2014-02-05 Yao Qi <yao@codesourcery.com>
2325 2013-05-24 Yao Qi <yao@codesourcery.com>
2327 * gdb.trace/tfile.exp: Test inferior and thread.
2329 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
2331 * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
2333 * gdb.base/step-bt.c: Call hello via function pointer to make
2334 sure its first instruction is executed on powerpc64le-linux.
2336 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
2338 * gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
2340 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
2342 * gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
2343 of the test patterns for use on little-endian systems.
2345 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
2347 * gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
2348 (decimal_vector): Fix for little-endian.
2350 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
2352 * gdb.arch/sparc-sysstep.exp: New file.
2353 * gdb.arch/sparc-sysstep.c: Likewise.
2355 * gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
2357 2014-01-28 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2359 * gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols.
2361 2014-01-23 Tom Tromey <tromey@redhat.com>
2363 * gdb.ada/array_char_idx: New testcase.
2365 2014-01-23 Tom Tromey <tromey@redhat.com>
2368 * gdb.python/py-framefilter.exp: Add test using "Error" filter.
2369 * gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
2372 2014-01-23 Tom Tromey <tromey@redhat.com>
2375 * gdb.python/py-framefilter.py (Reverse_Function.function): Read a
2376 string from an inferior frame.
2377 * gdb.python/py-framefilter-mi.exp: Update.
2379 2014-01-22 Doug Evans <dje@google.com>
2381 * gdb.server/server-mon.exp: Add tests for "set debug-format".
2383 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
2385 * gdb.base/catch-syscall.exp: Activate test on s390*-linux.
2387 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
2389 * gdb.trace/entry-values.exp: Remove excess space character from
2390 regex patterns. Handle s390 call instruction.
2392 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
2394 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
2395 define "*_start" label. Make "name" static.
2396 * gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
2397 ${name} by references to ${name}_start.
2399 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
2401 * gdb.base/info-macros.exp: Remove "debug" from the compile
2404 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
2406 * gdb.dlang/demangle.exp: New file.
2408 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
2410 * gdb.dlang/primitive-types.exp: New file.
2412 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
2414 * configure.ac: Create gdb.dlang/Makefile.
2415 * configure: Regenerate.
2416 * Makefile.in (ALL_SUBDIRS): Add gdb.dlang.
2417 * gdb.dlang/Makefile.in: New file.
2418 * lib/d-support.exp: New file.
2419 * lib/gdb.exp (skip_d_tests): New proc.
2421 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2423 * gdb.btrace/delta.exp: Check reverse stepi.
2424 * gdb.btrace/tailcall.exp: Update. Add stepping tests.
2425 * gdb.btrace/finish.exp: New.
2426 * gdb.btrace/next.exp: New.
2427 * gdb.btrace/nexti.exp: New.
2428 * gdb.btrace/record_goto.c: Add comments.
2429 * gdb.btrace/step.exp: New.
2430 * gdb.btrace/stepi.exp: New.
2431 * gdb.btrace/multi-thread-step.c: New.
2432 * gdb.btrace/multi-thread-step.exp: New.
2433 * gdb.btrace/rn-dl-bind.c: New.
2434 * gdb.btrace/rn-dl-bind.exp: New.
2435 * gdb.btrace/data.c: New.
2436 * gdb.btrace/data.exp: New.
2437 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
2439 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2441 * gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
2442 * gdb.btrace/exception.exp: Update.
2443 * gdb.btrace/instruction_history.exp: Update.
2444 * gdb.btrace/record_goto.exp: Update.
2445 * gdb.btrace/tailcall.exp: Update.
2446 * gdb.btrace/unknown_functions.exp: Update.
2447 * gdb.btrace/delta.exp: New.
2449 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2451 * gdb.btrace/record_goto.exp: Add backtrace test.
2452 * gdb.btrace/tailcall.exp: Add backtrace test.
2454 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2456 * gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto.
2457 * gdb.btrace/record_goto.c: New.
2458 * gdb.btrace/record_goto.exp: New.
2459 * gdb.btrace/x86-record_goto.S: New.
2461 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2463 * gdb.btrace/function_call_history.exp: Update tests.
2464 * gdb.btrace/instruction_history.exp: Update tests.
2466 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2468 * gdb.btrace/function_call_history.exp: Fix expected field
2469 order for "record function-call-history".
2470 Add new tests for "record function-call-history /c".
2471 * gdb.btrace/exception.cc: New.
2472 * gdb.btrace/exception.exp: New.
2473 * gdb.btrace/tailcall.exp: New.
2474 * gdb.btrace/x86-tailcall.S: New.
2475 * gdb.btrace/x86-tailcall.c: New.
2476 * gdb.btrace/unknown_functions.c: New.
2477 * gdb.btrace/unknown_functions.exp: New.
2478 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
2480 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2482 * gdb.btrace/instruction_history.exp: Update.
2483 * gdb.btrace/function_call_history.exp: Update.
2485 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2487 * gdb.btrace/function_call_history.exp: Fix expected function
2489 * gdb.btrace/instruction_history.exp: Initialize traced.
2490 Remove traced_functions.
2492 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2494 * gdb.btrace/function_call_history.exp: Update
2495 * gdb.btrace/instruction_history.exp: Update.
2497 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
2499 * gdb.btrace/enable.exp: Update expected text.
2501 2014-01-16 Omair Javaid <Omair.Javaid@linaro.org>
2503 * gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
2506 2014-01-15 Maciej W. Rozycki <macro@codesourcery.com>
2508 * gdb.base/float.exp: Handle "aarch64*-*-*" targets.
2510 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
2512 * lib/gdb.exp (supports_process_record): Return true for
2513 arm*-linux*. (supports_reverse): Likewise.
2515 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
2519 * gdb.python/py-type.c: Enhance test case.
2520 * gdb.python/py-value-cc.cc: Likewise
2521 * gdb.python/py-type.exp: Add new tests.
2522 * gdb.python/py-value-cc.exp: Likewise
2524 2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
2525 Pedro Alves <palves@redhat.com>
2527 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
2529 * gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
2530 references to ${name}_start by references to ${name}.
2532 2014-01-10 Joel Brobecker <brobecker@adacore.com>
2534 * gdb.ada/pp-rec-component.exp: Remove path from "source" test.
2536 2014-01-10 Joel Brobecker <brobecker@adacore.com>
2538 * gdb.python/py-pp-integral.exp: Remove path from "source" test.
2540 2014-01-09 Maciej W. Rozycki <macro@codesourcery.com>
2541 Pedro Alves <palves@redhat.com>
2543 * gdb.mi/mi-info-os.exp: Connect to the target with
2546 2014-01-08 Pedro Alves <palves@redhat.com>
2548 * gdb.threads/reconnect-signal.c: New file.
2549 * gdb.threads/reconnect-signal.exp: New file.
2551 2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2553 * gdb.base/source-dir.exp: New file.
2555 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2557 * gdb.ada/mi_interface: New testcase.
2559 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2561 * gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
2562 gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
2563 gdb.ada/pp-rec-component/pck.ads: New files.
2565 2014-01-07 Joel Brobecker <brobecker@adacore.com>
2567 * gdb.python/py-pp-integral.c: New file.
2568 * gdb.python/py-pp-integral.py: New file.
2569 * gdb.python/py-pp-integral.exp: New file.
2571 For older changes see ChangeLog-1993-2013.
2577 ;; version-control: never
2580 Copyright 2014 Free Software Foundation, Inc.
2581 Copying and distribution of this file, with or without modification,
2582 are permitted provided the copyright notice and this notice are preserved.