1 2015-05-08 Sergio Durigan Junior <sergiodj@redhat.com>
3 * gdb.base/coredump-filter.exp: Correctly unset
4 "coredump_var_addr" array.
6 2015-05-08 Pedro Alves <palves@redhat.com>
8 * gdb.server/non-existing-program.exp: Unset spawn_id.
10 2015-05-08 Siva Chandra Reddy <sivachandra@google.com>
13 * gdb.python/py-xmethods.exp: Add tests.
15 2015-05-08 Yao Qi <yao.qi@linaro.org>
18 * gdb.base/coredump-filter.c (set_coredump_filter): New function.
19 * gdb.base/coredump-filter.exp (do_save_core): Call inferior
20 function set_coredump_filter, and remove remote_exec call.
21 Remove argument ipid. Callers update.
22 (top level): Don't get inferior's PID.
24 2015-05-08 Andreas Arnez <arnez@linux.vnet.ibm.com>
26 * gdb.base/watch_thread_num.exp: Skip test on targets without
29 2015-05-06 Pedro Alves <palves@redhat.com>
32 * gdb.server/non-existing-program.exp: New file.
34 2015-05-05 Joel Brobecker <brobecker@adacore.com>
36 * gdb.ada/out_of_line_in_inlined.exp: Add run and "bt" tests.
38 2015-05-05 Joel Brobecker <brobecker@adacore.com>
40 * gdb.ada/out_of_line_in_inlined: New testcase.
42 2015-05-05 Joel Brobecker <brobecker@adacore.com>
44 * gdb.ada/var_rec_arr: New testcase.
46 2015-04-30 Yao Qi <yao.qi@linaro.org>
48 * gdb.base/break-idempotent.exp: If
49 skip_hw_watchpoint_multi_tests returns true, skip the tests
50 on "rwatch" and "awatch".
52 2015-04-30 Yao Qi <yao.qi@linaro.org>
54 * gdb.base/relativedebug.exp: Invoke gdb command
55 "info sharedlibrary", and if libc.so doesn't have debug info,
58 2015-04-29 Doug Evans <dje@google.com>
60 * gdb.python/py-xmethods.exp: Add ptype tests.
61 * gdb.python/py-xmethods.py (E_method_char_worker): Add
62 get_result_type method.
64 2015-04-29 Luis Machado <lgustavo@codesourcery.com>
66 * gdb.base/watch-bitfields.exp: Switch to software watchpoints if
67 the target does not support hardware watchpoints.
69 2015-04-29 Luis Machado <lgustavo@codesourcery.com>
71 * gdb.base/break-always.exp: Abort testing if writing to memory
74 2015-04-28 Doug Evans <dje@google.com>
76 * gdb.python/py-pp-maint.py: Move "replace" testing to ...
77 * gdb.python/py-pp-registration.exp: ... here. New file.
78 * gdb.python/py-pp-registration.c: New file.
79 * gdb.python/py-pp-registration.py: New file.
81 2015-04-28 Doug Evans <dje@google.com>
83 * gdb.python/py-bad-printers.c: New file.
84 * gdb.python/py-bad-printers.py: New file.
85 * gdb.python/py-bad-printers.exp: New file.
87 2015-04-28 Sasha Smundak <asmundak@google.com>
89 * gdb.python/py-type.exp: New test.
91 2015-04-28 Andy Wingo <wingo@igalia.com>
93 * gdb.python/py-parameter.exp:
94 * gdb.guile/scm-parameter.exp: Escape the path that we are
95 matching against, as it might contain characters that are special
96 to regular expressions.
98 2015-04-27 Joel Brobecker <brobecker@adacore.com>
100 * gdb.ada/rec_comp: New testcase.
102 2015-04-26 Sergio Durigan Junior <sergiodj@redhat.com>
104 * gdb.base/coredump-filter.exp: Clear variable "coredump_var_addr"
107 2015-04-24 Andrew Burgess <andrew.burgess@embecosm.com>
109 * gdb.base/dump.exp: Add *.verilog files to all_files list. Add
110 new tests for verilog output.
112 2015-04-24 Yao Qi <yao.qi@linaro.org>
114 * boards/remote-gdbserver-on-localhost.exp: New file.
116 2015-04-23 Pedro Alves <palves@redhat.com>
118 * gdb.base/interrupt.exp: Use an indirect spawn id list holding
119 $inferior_spawn_id instead of $inferior_spawn_id directly. On
120 "end of file", remove $inferior_spawn_id from the indirect list.
122 2015-04-23 Pedro Alves <palves@redhat.com>
124 * gdb.base/interrupt.exp: Rename saw_eof to saw_end_of_file.
126 2015-04-23 Pedro Alves <palves@redhat.com>
128 * lib/gdb.exp (gdb_test_multiple): Match eof/full_buffer/timeout
129 on $any_spawn_id instead of only on $gdb_spawn_id.
131 2015-04-21 Pierre Muller <muller@sourceware.org>
134 * lib/pascal.exp (gpc_compile): Add new option "class".
135 (fpc_compile): Likewise.
136 * gdb.pascal/case-insensitive-symbols.pas: New file.
137 * gdb.pascal/case-insensitive-symbols.exp: New file.
139 2015-04-20 Gary Benson <gbenson@redhat.com>
141 * gdb.base/attach.exp: Fix three extended remote failures.
143 2015-04-17 Gary Benson <gbenson@redhat.com>
145 * gdb.server/server-exec-info.exp: Inhibit GDB from accessing
146 the main executable over the remote protocol.
148 2015-04-16 Pedro Alves <palves@redhat.com>
150 * boards/native-extended-gdbserver.exp (mi_gdb_start): Don't start
151 a new gdbserver if gdbserver_reconnect_p is set.
153 2015-04-16 Pedro Alves <palves@redhat.com>
155 * lib/gdbserver-support.exp (gdb_exit): If gdbserver_reconnect_p
156 is set, don't exit gdbserver.
158 2015-04-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
160 * gdb.arch/s390-vregs.S (change_vrs): Replace exrl by an
161 appropriate .insn, such that an older assembler can be used.
162 * gdb.arch/s390-vregs.exp: Add the compile flag -mzarch, to enable
163 the z/Architecture instruction set on 31-bit targets as well.
165 2015-04-16 Andreas Arnez <arnez@linux.vnet.ibm.com>
167 * gdb.go/handcall.exp: Remove all logic related to the first
168 breakpoint and rely on go_runto_main instead.
169 * gdb.go/strings.exp: Likewise.
170 * gdb.go/unsafe.exp: Likewise.
171 * gdb.go/hello.exp: Likewise. Also rename the remaining
172 breakpoint marker to "breakpoint 1".
173 * gdb.go/handcall.go: Remove comment "set breakpoint 1 here".
174 * gdb.go/strings.go: Likewise.
175 * gdb.go/unsafe.go: Likewise.
176 * gdb.go/hello.go: Likewise. Also remove the second occurrence of
177 "set breakpoint 2 here" and rename the remaining breakpoint marker
180 2015-04-15 Simon Marchi <simon.marchi@ericsson.com>
182 * gdb.python/py-framefilter.py (ErrorFilter.filter): Use map function
183 if itertools.imap is not present.
184 * gdb.python/py-objfile.exp: Add parentheses.
185 * gdb.python/py-type.exp: Same.
186 * gdb.python/py-unwind-maint.py: Same.
188 2015-04-15 Yao Qi <yao.qi@linaro.org>
190 * gdb.dwarf2/dynarr-ptr.exp (assemble): Use $ptr_size instead
191 of ":$ptr_size" and set its form explicitly.
193 2015-04-15 Pedro Alves <palves@redhat.com>
194 Yao Qi <yao.qi@linaro.org>
196 * gdb.base/watch-bitfields.exp (test_watch_location): Increase
197 timeout by factor of 4.
198 (test_regular_watch): Likewise.
199 * gdb.base/watchpoint-solib.exp: Use with_timeout_factor.
200 * gdb.reverse/sigall-reverse.exp: Likewise.
201 * gdb.reverse/until-precsave.exp: Likewise.
202 * lib/gdb.exp (with_timeout_factor): New proc.
203 (gdb_expect): Move some code to ...
204 (get_largest_timeout): ... here. New procedure.
206 2015-04-14 Luis Machado <lgustavo@codesourcery.com>
208 * gdb.base/bp-permanent.exp (test): Reinstate correct test message.
210 2015-04-13 Luis Machado <lgustavo@codesourcery.com>
212 * gdb.base/bp-permanent.exp (test): Handle the case of being unable
213 to write to the .text section.
215 2015-04-13 Luis Machado <lgustavo@codesourcery.com>
217 * gdb.base/coredump-filter.exp: Restrict test to Linux systems only.
218 Handle the case of targets that do not provide PID information.
220 2015-04-13 Yao Qi <yao.qi@linaro.org>
222 * lib/gdbserver-support.exp (gdb_exit): Catch exception
223 and use expect instead of gdb_expect.
225 2015-04-13 Sergio Durigan Junior <sergiodj@redhat.com>
227 * gdb.base/coredump-filter.exp: Rename variable "addr" to
228 "coredump_var_addr" to avoid naming conflict with other testcases.
230 2015-04-10 Pedro Alves <palves@redhat.com>
232 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp: Use
233 gdb_test_sequence and gdb_assert.
235 2015-04-10 Pedro Alves <palves@redhat.com>
237 * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Use
238 test messages that don't include the breakpoint address.
240 2015-04-10 Yao Qi <yao.qi@linaro.org>
242 * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): Return
243 false for some offset and width combinations which aren't
244 supported by linux kernel.
246 2015-04-10 Pedro Alves <palves@redhat.com>
248 * gdb.threads/step-over-lands-on-breakpoint.exp (do_test): New
249 procedure, factored out from ...
250 (top level): ... here. Add "set displaced-stepping" testing axis.
251 * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): New
252 parameter "displaced". Use it.
253 (top level): Use foreach and add "set displaced-stepping" testing
256 2015-04-10 Pedro Alves <palves@redhat.com>
258 * gdb.threads/step-over-trips-on-watchpoint.c (child_function):
260 * gdb.threads/step-over-trips-on-watchpoint.exp (do_test): Find
261 both the address of the instruction that triggers the watchpoint
262 and the address of the instruction immediately after, and use
263 those addresses for the test. Fix comment.
265 2015-04-10 Pedro Alves <palves@redhat.com>
267 * gdb.base/sigstep.exp (breakpoint_to_handler)
268 (breakpoint_to_handler_entry): New parameter 'displaced'. Use it.
269 Test "backtrace" in handler.
270 (breakpoint_over_handler): New parameter 'displaced'. Use it.
271 (top level): Add new "displaced" test axis to
272 breakpoint_to_handler, breakpoint_to_handler_entry and
273 breakpoint_over_handler.
275 2015-04-10 Pedro Alves <palves@redhat.com>
278 * gdb.threads/multiple-step-overs.exp: Remove expected eof.
280 2015-04-10 Yao Qi <yao.qi@linaro.org>
282 * gdb.arch/arm-disp-step.S (main): Call test_add_rn_pc.
283 (test_add_rn_pc): New function.
284 * gdb.arch/arm-disp-step.exp (test_add_rn_pc): New proc.
285 (top level): Invoke test_add_rn_pc.
287 2015-04-10 Pedro Alves <palves@redhat.com>
290 * gdb.base/step-over-no-symbols.exp: New file.
292 2015-04-09 Andy Wingo <wingo@igalia.com>
294 * gdb.guile/scm-frame.exp: Add frame-read-register tests, modelled
295 after the Python tests.
297 2015-04-08 Keith Seitz <keiths@redhat.com>
300 * gdb.python/py-completion.exp: New tests for completion.
301 * gdb.python/py-completion.py (CompleteLimit1): New class.
302 (CompleteLimit2): Likewise.
303 (CompleteLimit3): Likewise.
304 (CompleteLimit4): Likewise.
305 (CompleteLimit5): Likewise.
306 (CompleteLimit6): Likewise.
307 (CompleteLimit7): Likewise.
309 2015-04-08 Pedro Alves <palves@redhat.com>
313 * gdb.threads/multiple-step-overs.c (sigusr1_handler): New
315 (main): Install it as SIGUSR1 handler.
316 * gdb.threads/multiple-step-overs.exp (setup): Remove 'prefix'
317 parameter. Always use "setup" as prefix. Toggle "set
318 displaced-stepping" off/on depending on global. Don't switch to
320 (top level): Add displaced stepping "off/on" test axis. Update
321 "setup" calls. Wrap each subtest with with_test_prefix. Test
322 continuing with a queued signal in each thread.
324 2015-04-08 Pedro Alves <palves@redhat.com>
326 * gdb.trace/actions.exp: Use gdb_load before gdb_run_cmd.
327 * gdb.trace/infotrace.exp: Use gdb_load before gdb_run_cmd. Use
328 gdb_breakpoint instead of gdb_test that doesn't expect anything.
329 Return early if running to main fails.
330 * gdb.trace/while-stepping.exp: Likewise.
332 2015-04-07 Pedro Alves <palves@redhat.com>
334 * gdb.base/interrupt.exp: Don't skip if $inferior_spawn_id !=
335 $gdb_spawn_id. Use send_inferior and $inferior_spawn_id to
336 interact with inferior program.
338 2015-04-07 Pedro Alves <palves@redhat.com>
340 * lib/gdb.exp (inferior_spawn_id): New global.
341 (gdb_test_multiple): Handle "-i". Reset the spawn id to GDB's
342 spawn id after processing the user code.
343 (default_gdb_start): Set inferior_spawn_id.
344 (send_inferior): New procedure.
345 * lib/gdbserver-support.exp (gdbserver_start): Set
347 (close_gdbserver, gdb_exit): Unset inferior_spawn_id.
349 2015-04-07 Pedro Alves <palves@redhat.com>
351 * lib/gdb.exp (gdb_finish): Delete persistent gdbserver handling.
352 * lib/gdbserver-support.exp (gdbserver_start): Make
353 $server_spawn_id global.
354 (gdbserver_start): Don't wait for gdbserver's spawn id with
356 (close_gdbserver): New procedure.
357 (gdb_exit): Rename the default version and reimplement.
359 2015-04-07 Pedro Alves <palves@redhat.com>
361 * lib/gdb.exp (gdb_test_multiple): When processing an argument,
362 append the substituted item, not the original item.
364 2015-04-07 Pedro Alves <palves@redhat.com>
366 * gdb.base/interrupt.exp: Use gdb_test_multiple instead of
369 2015-04-07 Pedro Alves <palves@redhat.com>
371 * gdb.base/interrupt.exp: Don't handle the case of the inferior
372 output appearing once only.
374 2015-04-07 Pedro Alves <palves@redhat.com>
376 * gdb.trace/actions.exp: Use gdb_breakpoint instead of gdb_test
377 that doesn't expect anything. Return early if running to main
380 2015-04-07 Yao Qi <yao.qi@linaro.org>
382 * gdb.threads/non-stop-fair-events.c (SECONDS): New macro.
383 (child_function): Call alarm.
384 (main): Move call to alarm into the loop.
385 * gdb.threads/non-stop-fair-events.exp: Build program with
388 2015-04-06 Doug Evans <xdje42@gmail.com>
390 * lib/pascal.exp (gpc_compile): Rename dest arg to destfile.
391 Fix dest parameter to board_info.
392 (fpc_compile): Ditto.
393 (gdb_compile_pascal): Rename dest arg to destfile.
395 2015-04-03 Pierre-Marie de Rodat <derodat@adacore.com>
397 * gdb.ada/funcall_ref.exp: New file.
398 * gdb.ada/funcall_ref/foo.adb: New file.
400 2015-04-02 Yao Qi <yao.qi@linaro.org>
402 * gdb.threads/no-unwaited-for-left.exp: Set up kfail if target
405 2015-04-02 Gary Benson <gbenson@redhat.com>
407 * gdb.base/break-probes.exp: Cope with "target:" sysroot.
409 2015-04-01 Sasha Smundak <asmundak@google.com>
411 * gdb.python/py-unwind-maint.c: New file.
412 * gdb.python/py-unwind-maint.exp: New test.
413 * gdb.python/py-unwind-maint.py: New file.
414 * gdb.python/py-unwind.c: New file.
415 * gdb.python/py-unwind.exp: New test.
416 * gdb.python/py-unwind.py: New test.
418 2015-04-01 Pedro Alves <palves@redhat.com>
420 * gdb.threads/manythreads.exp (interrupt_and_wait): Pass $message
421 to fail instead of non-existent $test.
423 2015-04-01 Pedro Alves <palves@redhat.com>
425 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): Append space to
426 GDBFLAGS if not empty.
428 2015-04-01 Pierre-Marie de Rodat <derodat@adacore.com>
430 * gdb.ada/complete.exp: Remove "multi_line".
431 * gdb.ada/info_exc.exp: Remove "multi_line".
432 * gdb.ada/packed_tagged.exp: Remove "multi_line".
433 * gdb.ada/ptype_field.exp: Remove "multi_line".
434 * gdb.ada/sym_print_name.exp: Remove "multi_line".
435 * gdb.ada/tagged.exp: Remove "multi_line".
436 * gdb.btrace/buffer-size.exp: Replace [join [list ...]] with
438 * gdb.btrace/delta.exp: Likewise.
439 * gdb.btrace/exception.exp: Likewise.
440 * gdb.btrace/function_call_history.exp: Likewise.
441 * gdb.btrace/instruction_history.exp: Likewise.
442 * gdb.btrace/nohist.exp: Likewise.
443 * gdb.btrace/record_goto.exp: Likewise.
444 * gdb.btrace/segv.exp: Likewise.
445 * gdb.btrace/stepi.exp: Likewise.
446 * gdb.btrace/tailcall.exp: Likewise.
447 * gdb.btrace/unknown_functions.exp: Likewise.
448 * gdb.dwarf2/dw2-undefined-ret-addr.exp: Likewise.
449 * lib/gdb.exp: Add the "multi_line" helper.
451 2015-04-01 Pedro Alves <palves@redhat.com>
453 * gdb.threads/tid-reuse.c: New file.
454 * gdb.threads/tid-reuse.exp: New file.
456 2015-03-31 Sergio Durigan Junior <sergiodj@redhat.com>
459 * gdb.base/coredump-filter.c: New file.
460 * gdb.base/coredump-filter.exp: Likewise.
462 2015-03-27 Petr Machata <pmachata@redhat.com>
464 * lib/dwarf.exp (Dwarf::_handle_DW_FORM): Handle DW_FORM_sec_offset.
465 (Dwarf::_line_count, Dwarf::_line_saw_file): New variables.
466 (Dwarf::assemble): Initialize them.
467 (Dwarf::lines): New function.
469 2015-03-26 Jon Turney <jon.turney@dronecode.org.uk>
471 * lib/gdb.exp (gdb_target_symbol_prefix_flags): Don't set
472 SYMBOL_PREFIX for x86_64-*-cygwin.
474 2015-03-26 Andy Wingo <wingo@igalia.com>
477 * gdb.dwarf2/dw2-intercu.S (one, two): Add variables that have a
478 const_value but not a location.
479 * gdb.dwarf2/dw2-intercu.exp: Add tests that constants without
480 location defined in non-main CUs are visible.
482 2015-03-26 Yao Qi <yao.qi@linaro.org>
485 * gdb.linespec/break-asm-file0.s (func): New label .Lfunc_2.
486 Add a line number entry for the same line.
487 * gdb.linespec/break-asm-file1.s (func): New label .Lfunc_2.
488 Add a line number entry for the same line.
490 2015-03-26 Yao Qi <yao.qi@linaro.org>
492 * gdb.linespec/break-asm-file0.s (func2): Use nop instead of
494 (func): Likewise. Add .Lfunc_1 label.
496 * gdb.linespec/break-asm-file1.s (func3): Use nop instead of
501 2015-03-26 Yao Qi <yao.qi@linaro.org>
503 * gdb.linespec/break-asm-file.exp: Don't call prepare_for_testing.
504 Call gdb_compile instead to compile each .s files without debug
507 2015-03-26 Yao Qi <yao.qi@linaro.org>
509 * gdb.base/savedregs.exp (process_saved_regs): Make
510 "Saved registers:" optional in the pattern.
512 2015-03-25 Markus Metzger <markus.t.metzger@intel.com>
514 * gdb.btrace/next.exp: Merged into step.exp.
515 * gdb.btrace/finish.exp: Merged into step.exp.
516 * gdb.btrace/nexti.exp: Merged into stepi.exp.
517 * gdb.btrace/step.exp: Use record_goto.c as test file. Avoid using
518 "record goto" and checking the exact replay position.
519 * gdb.btrace/stepi.exp: Choose test file based on target. Do not
520 check for "Recording format" in "info record" output.
521 * gdb.btrace/record_goto.exp: Choose test file based on target.
522 * gdb.btrace/x86-record_goto.S: Renamed into ...
523 * gdb.btrace/x86_64-record_goto.S: ... this.
524 * gdb.btrace/i686-record_goto.S: New.
525 * gdb.btrace/x86-tailcall.S: Renamed into ...
526 * gdb.btrace/x86_64-tailcall.S: ... this.
527 * gdb.btrace/i686-tailcall.S: New.
528 * gdb.btrace/x86-tailcall.c: Renamed into ...
529 * gdb.btrace/tailcall.c: ... this. Split "return ++answer" into two
530 separate statements. Update test.
531 * gdb.btrace/delta.exp: Use record_goto.c as test file.
532 * gdb.btrace/gcore.exp: Use record_goto.c as test file.
533 * gdb.btrace/nohist.exp: Use record_goto.c as test file.
534 * gdb.btrace/tailcall.exp: Choose test file based on target.
535 * gdb.btrace/Makefile.in: Remove next, finish, and nexti.
537 2015-03-25 Markus Metzger <markus.t.metzger@intel.com>
539 * gdb.btrace/exception.exp: Increase BTS buffer size.
541 2015-03-24 Pedro Alves <palves@redhat.com>
543 * gdb.threads/no-unwaited-for-left.exp: Test "thread apply all".
545 2015-03-24 Pedro Alves <palves@redhat.com>
547 * gdb.threads/schedlock.exp (test_step): No longer expect that
548 "set scheduler-locking step" with "next" over a function call runs
551 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
553 * gdb.mi/mi-pending.exp: Fix output of breakpoint test.
555 2015-03-24 Antoine Tremblay <antoine.tremblay@ericsson.com>
558 * gdb.mi/Makefile.in: Add mi-pendshr2.sl to cleanup.
559 * gdb.mi/mi-pending.c (thread_func): New function.
560 (int main): Add threading support required.
561 * gdb.mi/mi-pending.exp: Add tests for this issue.
562 * gdb.mi/mi-pendshr.c (pendfunc1): Remove stdio dependency.
563 (pendfunc2): Remove stdio dependency.
564 * gdb.mi/mi-pendshr2.c: New file.
566 2015-03-23 Keith Seitz <keiths@redhat.com>
568 * gdb.linespec/keywords.c: New file.
569 * gdb.linespec/keywords.exp: New file.
571 2015-03-23 Keith Seitz <keiths@redhat.com>
574 * gdb.dwarf2/staticvirtual.exp: New test.
576 2015-03-20 Jan Kratochvil <jan.kratochvil@redhat.com>
578 * Makefile.in (ALL_SUBDIRS): Remove gdb.hp.
579 * README: Remove HP-UX and gdb.hp.
581 * configure: Regenerate.
582 * configure.ac (AC_OUTPUT): Remove gdb.hp/Makefile,
583 gdb.hp/gdb.objdbg/Makefile, gdb.hp/gdb.base-hp/Makefile,
584 gdb.hp/gdb.aCC/Makefile, gdb.hp/gdb.compat/Makefile,
585 gdb.hp/gdb.defects/Makefile.
586 * gdb.hp/Makefile.in: File deleted.
587 * gdb.hp/gdb.aCC/Makefile.in: File deleted.
588 * gdb.hp/gdb.aCC/optimize.c: File deleted.
589 * gdb.hp/gdb.aCC/optimize.exp: File deleted.
590 * gdb.hp/gdb.aCC/run.c: File deleted.
591 * gdb.hp/gdb.aCC/watch-cmd.exp: File deleted.
592 * gdb.hp/gdb.base-hp/Makefile.in: File deleted.
593 * gdb.hp/gdb.base-hp/callfwmall.c: File deleted.
594 * gdb.hp/gdb.base-hp/callfwmall.exp: File deleted.
595 * gdb.hp/gdb.base-hp/dollar.c: File deleted.
596 * gdb.hp/gdb.base-hp/dollar.exp: File deleted.
597 * gdb.hp/gdb.base-hp/genso-thresh.c: File deleted.
598 * gdb.hp/gdb.base-hp/hwwatchbus.c: File deleted.
599 * gdb.hp/gdb.base-hp/hwwatchbus.exp: File deleted.
600 * gdb.hp/gdb.base-hp/pxdb.c: File deleted.
601 * gdb.hp/gdb.base-hp/pxdb.exp: File deleted.
602 * gdb.hp/gdb.base-hp/reg-pa64.exp: File deleted.
603 * gdb.hp/gdb.base-hp/reg-pa64.s: File deleted.
604 * gdb.hp/gdb.base-hp/reg.exp: File deleted.
605 * gdb.hp/gdb.base-hp/reg.s: File deleted.
606 * gdb.hp/gdb.base-hp/sized-enum.c: File deleted.
607 * gdb.hp/gdb.base-hp/sized-enum.exp: File deleted.
608 * gdb.hp/gdb.base-hp/so-thresh.exp: File deleted.
609 * gdb.hp/gdb.base-hp/so-thresh.mk: File deleted.
610 * gdb.hp/gdb.base-hp/so-thresh.sh: File deleted.
611 * gdb.hp/gdb.compat/Makefile.in: File deleted.
612 * gdb.hp/gdb.compat/average.c: File deleted.
613 * gdb.hp/gdb.compat/sum.c: File deleted.
614 * gdb.hp/gdb.compat/xdb.c: File deleted.
615 * gdb.hp/gdb.compat/xdb0.c: File deleted.
616 * gdb.hp/gdb.compat/xdb0.h: File deleted.
617 * gdb.hp/gdb.compat/xdb1.c: File deleted.
618 * gdb.hp/gdb.compat/xdb1.exp: File deleted.
619 * gdb.hp/gdb.compat/xdb2.exp: File deleted.
620 * gdb.hp/gdb.compat/xdb3.exp: File deleted.
621 * gdb.hp/gdb.defects/Makefile.in: File deleted.
622 * gdb.hp/gdb.defects/bs14602.c: File deleted.
623 * gdb.hp/gdb.defects/bs14602.exp: File deleted.
624 * gdb.hp/gdb.defects/solib-d.c: File deleted.
625 * gdb.hp/gdb.defects/solib-d.exp: File deleted.
626 * gdb.hp/gdb.defects/solib-d1.c: File deleted.
627 * gdb.hp/gdb.defects/solib-d2.c: File deleted.
628 * gdb.hp/gdb.objdbg/Makefile.in: File deleted.
629 * gdb.hp/gdb.objdbg/objdbg01.exp: File deleted.
630 * gdb.hp/gdb.objdbg/objdbg01/x1.cc: File deleted.
631 * gdb.hp/gdb.objdbg/objdbg01/x2.cc: File deleted.
632 * gdb.hp/gdb.objdbg/objdbg01/x3.cc: File deleted.
633 * gdb.hp/gdb.objdbg/objdbg01/x3.h: File deleted.
634 * gdb.hp/gdb.objdbg/objdbg02.exp: File deleted.
635 * gdb.hp/gdb.objdbg/objdbg02/x1.cc: File deleted.
636 * gdb.hp/gdb.objdbg/objdbg02/x2.cc: File deleted.
637 * gdb.hp/gdb.objdbg/objdbg02/x3.cc: File deleted.
638 * gdb.hp/gdb.objdbg/objdbg03.exp: File deleted.
639 * gdb.hp/gdb.objdbg/objdbg03/x1.cc: File deleted.
640 * gdb.hp/gdb.objdbg/objdbg03/x2.cc: File deleted.
641 * gdb.hp/gdb.objdbg/objdbg03/x3.cc: File deleted.
642 * gdb.hp/gdb.objdbg/objdbg04.exp: File deleted.
643 * gdb.hp/gdb.objdbg/objdbg04/x.h: File deleted.
644 * gdb.hp/gdb.objdbg/objdbg04/x1.cc: File deleted.
645 * gdb.hp/gdb.objdbg/objdbg04/x2.cc: File deleted.
646 * gdb.hp/gdb.objdbg/tools/symaddr: File deleted.
647 * gdb.hp/gdb.objdbg/tools/symaddr.pa64: File deleted.
648 * gdb.hp/gdb.objdbg/tools/test-objdbg.cc: File deleted.
649 * gdb.hp/tools/odump: File deleted.
651 2015-03-19 Pedro Alves <palves@redhat.com>
653 * gdb.threads/continue-pending-status.exp (saw_thread_2)
654 (saw_thread_3): New globals.
655 (top level): Increment them when an event for the corresponding
657 (no thread starvation): New test.
659 2015-03-19 Pedro Alves <palves@redhat.com>
661 * gdb.threads/continue-pending-status.c: New file.
662 * gdb.threads/continue-pending-status.exp: New file.
664 2015-03-18 Pedro Alves <palves@redhat.com>
666 * gdb.base/disp-step-syscall.exp (disp_step_cross_syscall):
667 Use gdb_is_target_remote instead of is_remote. Use
668 gdb_test_multiple instead of gdb_expect. Exit early if
669 gdb_test_multiple hits its internal matches. Tighten stepi tests
670 expected output. Fail on exit with any signal, instead of just
673 2015-03-18 Yao Qi <yao.qi@linaro.org>
676 * gdb.base/catch-syscall.c [!SYS_pipe] (pipe2_syscall): New
678 * gdb.base/catch-syscall.exp: Don't skip it on
679 aarch64*-*-linux* target. Remove elements in all_syscalls.
680 (test_catch_syscall_multi_arch): Skip it on aarch64*-linux*
682 (setup_all_syscalls): New proc.
684 2015-03-16 Yao Qi <yao.qi@linaro.org>
686 * gdb.base/watchpoint-reuse-slot.exp (valid_addr_p): New proc.
687 (top level): Skip tests if valid_addr_p returns false for
690 2015-03-11 Andy Wingo <wingo@igalia.com>
692 * gdb.guile/scm-objfile.exp: Add objfile-progspace test.
694 2015-03-11 Yao Qi <yao.qi@linaro.org>
696 * gdb.base/catch-syscall.exp: Fix typo in comments.
698 2015-03-11 Yao Qi <yao.qi@linaro.org>
700 * gdb.base/catch-syscall.exp: Skip it on HP-UX target.
702 2015-03-09 Pedro Alves <palves@redhat.com>
704 * dg-extract-results.py: Delete.
706 2015-03-09 Pedro Alves <palves@redhat.com>
708 Merge dg-extract-results.sh from GCC upstream (r218843).
710 2014-12-17 Sergio Durigan Junior <sergiodj@redhat.com>
711 * dg-extract-results.sh: Use --text with grep to avoid issues with
712 binary files. Fall back to cat -v, if that doesn't work.
714 2015-03-05 Pedro Alves <palves@redhat.com>
716 * gdb.base/bp-permanent.exp: Tighten "next over setup" regex.
718 2015-03-04 Simon Marchi <simon.marchi@ericsson.com>
720 * lib/mi-support.exp (mi_expect_interrupt): Accept
721 alternative event for when in all-stop mode.
723 2015-03-04 Pedro Alves <palves@redhat.com>
725 * gdb.threads/thread-specific-bp.exp: Delete "info threads" test.
727 2015-03-04 Mark Kettenis <kettenis@gnu.org>
729 * gdb.base/foll-fork.exp: Enable on *-*-openbsd*.
731 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
733 * gdb.base/breakpoint-in-ro-region.exp (test_single_step): In the
734 regexps for GDB's current line display, accept a hex address
735 preceding the line number.
737 2015-03-04 Andreas Arnez <arnez@linux.vnet.ibm.com>
739 * gdb.base/catch-syscall.exp (test_catch_syscall_multi_arch): Set
740 the 'arch1' variable for "s390*-linux*" targets.
742 2015-03-04 Pedro Alves <palves@redhat.com>
744 * gdb.threads/clone-thread_db.c: Include unistd.h and pthread.h.
745 (main): Pass missing retval argument to pthread_join call.
747 2015-03-02 Pedro Alves <palves@redhat.com>
749 * gdb.threads/thread-execl.exp (do_test): Handle non-stop.
750 (top level): Call do_test with non-stop as well.
752 2015-03-02 Pedro Alves <palves@redhat.com>
754 * lib/gdb.exp (gdb_test_multiple) <internal error>: Set result to
757 2015-03-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
759 * gdb.arch/s390-vregs.exp: New test.
760 * gdb.arch/s390-vregs.S: New file.
762 2015-02-27 Pedro Alves <palves@redhat.com>
764 * gdb.gdb/python-interrupts.exp (test_python_interrupts): Adjust
765 call to catch_command_errors.
766 * gdb.gdb/python-selftest.exp (selftest_python): Adjust call to
767 catch_command_errors.
769 2015-02-27 Pedro Alves <palves@redhat.com>
771 * gdb.gdb/complaints.exp (test_initial_complaints): Also accept
772 "true" for boolean result.
773 * gdb.gdb/selftest.exp (test_with_self): Also accept full
776 2015-02-27 Pedro Alves <palves@redhat.com>
778 * lib/unbuffer_output.c: New file.
779 * gdb.base/interrupt.c: Include "../lib/unbuffer_output.c".
780 (main): Call gdb_unbuffer_output.
782 2015-02-27 Yao Qi <yao.qi@linaro.org>
784 * gdb.base/catch-syscall.exp: Don't skip it on hppa*-hp-hpux*
787 2015-02-26 Doug Evans <dje@google.com>
789 * gdb.cp/class2.cc (Dbase, D): New classes.
790 (main): New local delta.
791 * gdb.cp/class2.exp: Test printing delta.
792 * gdb.cp/classes.cc (DynamicBase2, DynamicBar): New classes.
793 (dynbar): New global.
794 * gdb.cp/classes.exp (test_ptype_class_objects): Test ptype DynamicBar.
796 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
798 * gdb.compile/compile-ifunc.c: New file.
799 * gdb.compile/compile-ifunc.exp: New file.
801 2015-02-26 Antoine Tremblay <antoine.tremblay@ericsson.com>
803 * gdb.base/structs.exp: Check for correct struct on finish.
805 2015-02-26 Yao Qi <yao.qi@linaro.org>
807 * lib/dwarf.exp (function_range): Adjust pattern when $func_length
810 2015-02-26 Jan Kratochvil <jan.kratochvil@redhat.com>
812 * gdb.arch/cordic.ko.bz2: New file.
813 * gdb.arch/cordic.ko.debug.bz2: New file.
814 * gdb.arch/ppc64-symtab-cordic.exp: New file.
816 2015-02-25 Yao Qi <yao.qi@linaro.org>
818 * gdb.xml/tdesc-regs.exp: Set core-regs to aarch64-core.xml for
821 2015-02-23 Pedro Alves <palves@redhat.com>
823 * lib/gdb.exp (delete_breakpoints): Rewrite using
826 2015-02-23 Pedro Alves <palves@redhat.com>
828 * gdb.base/info-os.c: Include stdlib.h.
830 2015-02-22 Doug Evans <xdje42@gmail.com>
833 * gdb.ada/exec_changed.exp: Add second test where symbol lookup cache
834 is read after symbols have been re-read.
835 * gdb.ada/exec_changed/first.adb (First): New procedure Break_Me.
836 * gdb.ada/exec_changed/second.adb (Second): Ditto.
838 2015-02-21 Doug Evans <dje@google.com>
840 * gdb.cp/anon-ns.exp: Add test for ptype '(anonymous namespace)'.
842 2015-02-21 Jan Kratochvil <jan.kratochvil@redhat.com>
845 * gdb.arch/i386-biarch-core.core.bz2: New file.
846 * gdb.arch/i386-biarch-core.exp: New file.
848 2015-02-21 Pedro Alves <palves@redhat.com>
850 * gdb.threads/multi-create-ns-info-thr.exp: Return early if
853 2015-02-20 Pedro Alves <palves@redhat.com>
855 * gdb.base/solib-corrupted.exp: Expect "stap" as first column of
858 2015-02-20 Pedro Alves <palves@redhat.com>
860 * gdb.threads/multi-create-ns-info-thr.exp: New file.
862 2015-02-20 Pedro Alves <palves@redhat.com>
864 * gdb.trace/no-attach-trace.exp: Don't run to main. Do
865 clean_restart before gdb_target_supports_trace.
867 2015-02-20 Pedro Alves <palves@redhat.com>
870 * gdb.threads/clone-thread_db.c: New file.
871 * gdb.threads/clone-thread_db.exp: New file.
873 2015-02-19 Antoine Tremblay <antoine.tremblay@ericsson.com>
876 * gdb.base/catch-gdb-caused-signals.c: New file.
877 * gdb.base/catch-gdb-caused-signals.exp: New file.
879 2015-02-18 Jose E. Marchesi <jose.marchesi@oracle.com>
881 * configure: Regenerated.
882 * configure.ac: Use GDB_AC_TRANSFORM.
883 * aclocal.m4: sinclude ../transform.m4.
885 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
887 * lib/dtrace.exp: New file.
888 * gdb.base/dtrace-probe.exp: Likewise.
889 * gdb.base/dtrace-probe.d: Likewise.
890 * gdb.base/dtrace-probe.c: Likewise.
891 * lib/pdtrace.in: Likewise.
892 * configure.ac: Output variables with the transformed names of
893 the strip, readelf, as and nm tools. AC_SUBST lib/pdtrace.in.
894 * configure: Regenerated.
896 2015-02-17 Jose E. Marchesi <jose.marchesi@oracle.com>
898 * gdb.base/stap-probe.exp (stap_test): Remove "SystemTap" from
899 expected message when trying to access $_probe_* convenience
900 variables while not on a probe.
902 2015-02-11 Jan Kratochvil <jan.kratochvil@redhat.com>
904 * gdb.python/py-framefilter.exp (pagination quit - *): New tests.
906 2015-02-11 Pedro Alves <pedro@codesourcery.com>
908 * gdb.threads/step-bg-decr-pc-switch-thread.c: New file.
909 * gdb.threads/step-bg-decr-pc-switch-thread.exp: New file.
911 2015-02-10 Doug Evans <xdje42@gmail.com>
913 * lib/gdb.exp (gdb_load): Always return a result.
915 2015-02-10 Pedro Alves <palves@redhat.com>
917 * gdb.threads/signal-sigtrap.c: New file.
918 * gdb.threads/signal-sigtrap.exp: New file.
920 2015-02-10 Antoine Tremblay <antoine.tremblay@ericsson.com>
922 * gdb.trace/no-attach-trace.c: New file.
923 * gdb.trace/no-attach-trace.exp: New file.
925 2015-02-09 Mark Wielaard <mjw@redhat.com>
927 * gdb.dwarf2/atomic.c: New file.
928 * gdb.dwarf2/atomic-type.exp: Likewise.
930 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
932 * gdb.btrace/buffer-size.exp: Update "info record" output.
933 * gdb.btrace/delta.exp: Update "info record" output.
934 * gdb.btrace/enable.exp: Update "info record" output.
935 * gdb.btrace/finish.exp: Update "info record" output.
936 * gdb.btrace/instruction_history.exp: Update "info record" output.
937 * gdb.btrace/next.exp: Update "info record" output.
938 * gdb.btrace/nexti.exp: Update "info record" output.
939 * gdb.btrace/step.exp: Update "info record" output.
940 * gdb.btrace/stepi.exp: Update "info record" output.
941 * gdb.btrace/nohist.exp: Update "info record" output.
943 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
945 * gdb.btrace/buffer-size: New.
947 2015-02-09 Markus Metzger <markus.t.metzger@intel.com>
949 * gdb.btrace/delta.exp: Update "info record" output.
950 * gdb.btrace/enable.exp: Update "info record" output.
951 * gdb.btrace/finish.exp: Update "info record" output.
952 * gdb.btrace/instruction_history.exp: Update "info record" output.
953 * gdb.btrace/next.exp: Update "info record" output.
954 * gdb.btrace/nexti.exp: Update "info record" output.
955 * gdb.btrace/step.exp: Update "info record" output.
956 * gdb.btrace/stepi.exp: Update "info record" output.
957 * gdb.btrace/nohist.exp: Update "info record" output.
959 2015-02-06 Simon Marchi <simon.marchi@ericsson.com>
962 * gdb.base/ena-dis-br.exp: Test "enable count" for bad user input.
964 2015-02-06 Pedro Alves <palves@redhat.com>
966 * gdb.threads/attach-many-short-lived-threads.c (SECONDS): New
968 (seconds_left, again): New globals.
969 (main): Wait seconds_left in a 1-second sleep loop instead of
970 sleeping 180 seconds. If 'again' is set, reset the seconds
972 * gdb.threads/attach-many-short-lived-threads.exp (test): Set
973 'again' in the inferior before detaching. Print the seconds left.
974 (options): New global.
975 (top level): Build program with -DTIMEOUT=$timeout.
977 2015-02-06 Pedro Alves <palves@redhat.com>
979 * gdb.base/gdb-sigterm.c (main): Use the TIMEOUT define to
980 determine how many seconds to pass to 'alarm'.
981 * gdb.base/gdb-sigterm.exp (top level): Build program with
983 (do_test): Return success/failure indication. Add more verbose
984 logging. Don't fail if 200 single steps are seen. Instead, fail
985 when the test times out.
986 (passes): New global.
987 (top level): Break the testing loop if testing fails on any
988 iteration. Use gdb_assert.
990 2015-02-04 Don Breazeal <donb@codesourcery.com>
992 * gdb.base/info-os.c (shmid, semid, msqid): Make variables static
994 (ipc_cleanup): New function.
995 (main): Don't declare shmid, semid, and msqid. Add a call to
996 atexit so that we call ipc_cleanup on exit.
998 2015-02-04 Pedro Alves <palves@redhat.com>
1000 * boards/native-extended-gdbserver.exp: Remove any target variant
1001 specifications from the board name before clearing the isremote
1002 flag from board_info.
1004 2015-01-31 Doug Evans <xdje42@gmail.com>
1006 * gdb.base/maint.exp <maint print type argc>: Update expected output.
1008 2015-01-31 Gary Benson <gbenson@redhat.com>
1010 * gdb.base/completion.exp: Disable completion limiting for
1011 existing tests. Add new tests to check completion limiting.
1012 * gdb.linespec/ls-errs.exp: Disable completion limiting.
1014 2015-01-31 Doug Evans <xdje42@gmail.com>
1016 * gdb.ada/dyn_arrayidx.exp: Add additional_flags=-gnat12.
1018 2015-01-31 Doug Evans <xdje42@gmail.com>
1020 * gdb.guile/scm-section-script.c: Add duplicate inlined section script
1021 entries. Duplicate file section script entries.
1022 * gdb.guile/scm-section-script.exp: Add tests for duplicate entries,
1023 inlined entries. Add test for safe-path rejection.
1024 * gdb.python/py-section-script.c: Add duplicate inlined section script
1025 entries. Duplicate file section script entries.
1026 * gdb.python/py-section-script.exp: Add tests for duplicate entries,
1027 inlined entries. Add test for safe-path rejection.
1029 2015-01-29 Joel Brobecker <brobecker@adacore.com>
1031 * gdb.ada/disc_arr_bound: New testcase.
1033 2015-01-29 Joel Brobecker <brobecker@adacore.com>
1035 * gdb.ada/mi_var_array: New testcase.
1037 2015-01-27 Doug Evans <dje@google.com>
1039 * gdb.python/py-objfile.exp: Add tests for objfile.username.
1040 Add test for objfile.filename, objfile.username after objfile
1043 2015-01-26 Joel Brobecker <brobecker@adacore.com>
1045 * gdb.python/py-lookup-type.exp (test_lookup_type): Change
1046 the second test to print the name attribute of value
1047 returned by the call to gdb.lookup_type, and adjust
1048 the expected output accordingly.
1050 2015-01-25 Mark Wielaard <mjw@redhat.com>
1052 * gdb.arch/i386-bp_permanent.c (standard): New declaration.
1053 * gdb.base/disp-step-fork.c: Include unistd.h.
1054 * gdb.base/siginfo-obj.c: Include stdio.h.
1055 * gdb.base/siginfo-thread.c: Likewise.
1056 * gdb.mi/non-stop.c: Include unistd.h.
1057 * gdb.mi/nsthrexec.c: Include stdio.h.
1058 * gdb.mi/pthreads.c: Include unistd.h.
1059 * gdb.modula2/unbounded1.c (main): Declare returns int.
1060 * gdb.reverse/consecutive-reverse.c: Likewise.
1061 * gdb.threads/create-fail.c: Include unistd.h.
1062 * gdb.threads/killed.c: Likewise.
1063 * gdb.threads/linux-dp.c: Likewise.
1064 * gdb.threads/non-ldr-exc-1.c: Include stdio.h and string.h.
1065 * gdb.threads/non-ldr-exc-2.c: Likewise.
1066 * gdb.threads/non-ldr-exc-3.c: Likewise.
1067 * gdb.threads/non-ldr-exc-4.c: Likewise.
1068 * gdb.threads/pthreads.c: Include unistd.h.
1069 (main): Declare returns int.
1070 * gdb.threads/tls-main.c (foo): New declaration.
1071 * gdb.threads/watchpoint-fork-mt.c: Define _GNU_SOURCE.
1073 2015-01-23 Simon Marchi <simon.marchi@ericsson.com>
1075 * gdb.mi/mi-var-list-children-invalid-grandchild.c: New file.
1076 * gdb.mi/mi-var-list-children-invalid-grandchild.exp: New file.
1078 2015-01-15 Mark Wielaard <mjw@redhat.com>
1080 * gdb.base/noreturn-return.c: New file.
1081 * gdb.base/noreturn-return.exp: New file.
1082 * gdb.base/noreturn-finish.c: New file.
1083 * gdb.base/noreturn-finish.exp: New file.
1085 2015-01-23 Pedro Alves <palves@redhat.com>
1087 * gdb.threads/continue-pending-after-query.c: New file.
1088 * gdb.threads/continue-pending-after-query.exp: New file.
1090 2015-01-22 Anders Granlund <anders.granlund@ericsson.com>
1091 Simon Marchi <simon.marchi@ericsson.com>
1093 * gdb.base/statistics.exp: Assign spawn id to gdb_spawn_id.
1094 * gdb.base/valgrind-db-attach.exp: Same.
1095 * gdb.base/valgrind-infcall.exp: Same.
1096 * lib/mi-support.exp (default_mi_gdb_start): Same.
1097 * lib/prompt.exp (default_prompt_gdb_start): Same.
1098 * lib/gdb.exp (default_gdb_spawn): Same.
1099 (gdb_interact): New.
1102 2015-01-22 Jan Kratochvil <jan.kratochvil@redhat.com>
1104 * gdb.compile/compile.exp (pointer to jit function): New test.
1106 2015-01-17 Wei-cheng Wang <cole945@gmail.com>
1108 * lib/gdb.exp (supports_process_record): Return true for
1110 (supports_reverse): Likewise.
1112 2015-01-15 Don Breazeal <donb@codesourcery.com>
1114 * gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach
1115 instead of checking whether the target board is remote and
1116 use spawn_wait_for_attach instead of exec/sleep.
1117 * gdb.base/attach-twice.exp: Likewise.
1119 2015-01-15 Joel Brobecker <brobecker@adacore.com>
1121 * gdb.ada/var_arr_attrs: New testcase.
1123 2015-01-14 Pedro Alves <palves@redhat.com>
1124 Joel Brobecker <brobecker@adacore.com>
1127 * gdb.base/bp-cmds-execution-x-script.c: New file.
1128 * gdb.base/bp-cmds-execution-x-script.exp: New file.
1129 * gdb.base/bp-cmds-execution-x-script.gdb: New file.
1131 2015-01-14 Pedro Alves <palves@redhat.com>
1134 * gdb.base/batch-preserve-term-settings.c: New file.
1135 * gdb.base/batch-preserve-term-settings.exp: New file.
1137 2015-01-13 Doug Evans <dje@google.com>
1139 * gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked
1142 2015-01-13 Joel Brobecker <brobecker@adacore.com>
1144 * Makefile.in (clean mostlyclean): Do not delete *.py.
1146 2015-01-13 Joel Brobecker <brobecker@adacore.com>
1148 * gdb.python/py-lookup-type.exp: New file.
1150 2015-01-12 Pedro Alves <palves@redhat.com>
1152 * gdb.python/py-prompt.exp: When the board can't spawn for attach,
1153 restore GDBFLAGS before returning.
1155 2015-01-12 Jan Kratochvil <jan.kratochvil@redhat.com>
1157 * gdb.python/py-frame.exp (test Frame.read_register(rip)): Use
1158 is_amd64_regs_target and is_x86_like_target.
1160 2015-01-11 Doug Evans <xdje42@gmail.com>
1162 * lib/dwarf.exp (Dwarf): Flag an error if a numeric attribute value
1163 is given without an explicit form.
1164 * gdb.dwarf2/arr-subrange.exp: Specify forms for all numeric
1166 * gdb.dwarf/corrupt.exp: Ditto.
1167 * gdb.dwarf2/enum-type.exp: Ditto.
1168 * gdb.trace/entry-values.exp: Ditto.
1169 * gdb.trace/unavailable-dwarf-piece.exp: Ditto.
1171 2015-01-11 Doug Evans <xdje42@gmail.com>
1174 * gdb.base/maint.exp: Remove references to "maint demangle".
1175 * gdb.cp/demangle.exp: Update. "maint demangle" -> "demangle".
1176 Add tests for explicitly specifying language to demangle.
1177 * gdb.dlang/demangle.exp: Ditto.
1179 2015-01-09 Pedro Alves <palves@redhat.com>
1181 * gdb.threads/non-stop-fair-events.c: New file.
1182 * gdb.threads/non-stop-fair-events.exp: New file.
1184 2015-01-09 Pedro Alves <palves@redhat.com>
1186 * gdb.base/annota1.exp (thread_test): Use srcfile and binfile from
1187 the global scope. Set a breakpoint after all threads are started
1188 rather than stepping over two source lines. Expect the prompt.
1189 * gdb.base/watch_thread_num.c (threads_started_barrier): New
1192 (main): Use threads_started_barrier to wait for all threads to
1193 start. Main thread no longer calls thread_function. Exit after
1195 (loop): New function.
1196 (thread_function): Wait on threads_started_barrier barrier. Call
1197 'loop' at each iteration.
1198 * gdb.base/watch_thread_num.exp: Continue to breakpoint after all
1199 threads have started, instead of hardcoding number of "next"
1200 steps. Use an access watchpoint instead of a write watchpoint.
1202 2015-01-09 Pedro Alves <palves@redhat.com>
1204 * gdb.threads/ia64-sigill.c (threads_started_barrier): New global.
1205 (thread_func): Wait on barrier.
1206 (main): Wait for all threads to start before stopping GDB.
1207 * gdb.threads/siginfo-threads.c (threads_started_barrier): New
1209 (thread1_func, thread2_func): Wait on barrier.
1210 (main): Wait for all threads to start before stopping GDB.
1211 * gdb.threads/watchthreads-reorder.c (threads_started_barrier):
1213 (thread1_func, thread2_func): Wait on barrier.
1214 (main): Wait for all threads to start before stopping GDB.
1216 2015-01-09 Pedro Alves <palves@redhat.com>
1218 * gdb.threads/attach-many-short-lived-threads.c: New file.
1219 * gdb.threads/attach-many-short-lived-threads.exp: New file.
1221 2014-01-09 Pedro Alves <palves@redhat.com>
1223 * gdb.threads/fork-thread-pending.exp: Switch to the main thread
1224 instead of to thread 2.
1225 * gdb.threads/signal-command-multiple-signals-pending.c (main):
1226 Add barrier around each pthread_create call instead of around all
1228 * gdb.threads/signal-command-multiple-signals-pending.exp (test):
1229 Set a break on thread_function and have the child threads hit it
1232 2015-01-09 Pedro Alves <palves@redhat.com>
1234 * lib/gdb.exp (can_spawn_for_attach): New procedure.
1235 (spawn_wait_for_attach): Error out if can_spawn_for_attach returns
1237 * gdb.base/attach.exp: Use can_spawn_for_attach instead of
1238 checking whether the target board is remote.
1239 * gdb.multi/multi-attach.exp: Likewise.
1240 * gdb.python/py-sync-interp.exp: Likewise.
1241 * gdb.server/ext-attach.exp: Likewise.
1242 * gdb.python/py-prompt.exp: Use can_spawn_for_attach before the
1243 tests that need to attach, instead of checking whether the target
1244 board is remote at the top of the file.
1246 2015-01-08 Yao Qi <yao@codesourcery.com>
1248 * gdb.trace/entry-values.exp: Set call_insn for MIPS target.
1250 2015-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
1252 Fix testcase compilation.
1253 * gdb.arch/i386-avx512.exp (comp_flags): Remove /common.
1255 2015-01-06 Joel Brobecker <brobecker@adacore.com>
1257 * gdb.python/py-type.exp: Add a couple test about empty
1258 array creation, and negative-length array creation.
1260 2015-01-02 Doug Evans <xdje42@gmail.com>
1262 * gdb.cp/nsalias.exp: Fix output of external/declaration flags.
1264 2015-01-02 Doug Evans <dje@google.com>
1266 * gdb.dwarf2/dw4-sig-types.exp: Also pass -fdebug-types-section to gcc.
1268 2014-12-29 Yao Qi <yao@codesourcery.com>
1270 * gdb.trace/entry-values.exp: Update comments. Rename variable
1271 bar_call_foo to returned_from_foo.
1273 2014-12-20 Mihail-Marian Nistor <mihail.nistor@freescale.com>
1276 * gdb.linespec/break-asm-file.c: New file.
1277 * gdb.linespec/break-asm-file.exp: New file.
1278 * gdb.linespec/break-asm-file0.s: New file.
1279 * gdb.linespec/break-asm-file1.s: New file.
1281 2014-12-18 Nigel Stephens <nigel@mips.com>
1282 Maciej W. Rozycki <macro@codesourcery.com>
1284 * gdb.base/float.exp: Handle the new output from "info float" on
1287 2014-12-17 Jan Kratochvil <jan.kratochvil@redhat.com>
1289 Fix MinGW compilation.
1290 * gdb.compile/compile-ops.exp: Update untested message if
1291 !skip_compile_feature_tests.
1292 * gdb.compile/compile-setjmp.exp: Likewise.
1293 * gdb.compile/compile-tls.exp: Likewise.
1294 * gdb.compile/compile.exp: Likewise.
1295 * lib/gdb.exp (skip_compile_feature_tests): Check also "Command not
1296 supported on this host".
1298 2014-12-16 Doug Evans <xdje42@gmail.com>
1300 * boards/stabs.exp: New file.
1302 2014-12-16 Andreas Arnez <arnez@vnet.linux.ibm.com>
1304 * gdb.base/completion.exp: Adjust to format changes of "maint
1305 print user-registers".
1307 2014-12-16 Catalin Udma <catalin.udma@freescale.com>
1310 * gdb.arch/aarch64-fp.c: New file.
1311 * gdb.arch/aarch64-fp.exp: New file.
1313 2014-12-15 Sergio Durigan Junior <sergiodj@redhat.com>
1315 Merge dg-extract-results.{sh,py} from GCC upstream (r210243,
1316 r210637, r210913, r211666, r215400, r215817).
1318 2014-05-08 Richard Sandiford <rdsandiford@googlemail.com>
1319 * dg-extract-results.py: New file.
1320 * dg-extract-results.sh: Use it if the environment seems
1323 2014-05-20 Richard Sandiford <rdsandiford@googlemail.com>
1325 * dg-extract-results.py (parse_run): Handle warnings that
1326 are printed before a test harness is run.
1328 2014-05-25 Richard Sandiford <rdsandiford@googlemail.com>
1330 * dg-extract-results.py (Named): Remove __cmp__ method.
1331 (output_variation): Use a key to sort variation.harnesses.
1333 2014-06-14 Richard Sandiford <rdsandiford@googlemail.com>
1335 * dg-extract-results.py: For Python 3, force sys.stdout to
1336 handle surrogate escape sequences.
1337 (safe_open): New function.
1338 (output_segment, main): Use it.
1340 2014-09-19 Segher Boessenkool <segher@kernel.crashing.org>
1342 * dg-extract-results.py (Prog.result_re): Include options
1345 2014-10-02 Segher Boessenkool <segher@kernel.crashing.org>
1347 * dg-extract-results.py (output_variation): Always sort if
1350 2014-12-15 Simon Marchi <simon.marchi@ericsson.com>
1352 * lib/gdb.exp (default_gdb_start): After starting gdb, loop
1353 as long as we get pagination notifications.
1355 2014-12-15 Jason Merrill <jason@redhat.com>
1357 * Makefile.in (check-gdb.%): Restore.
1358 * README: Mention it.
1360 2014-12-13 Joel Brobecker <brobecker@adacore.com>
1362 * gdb.ada/str_uninit: New testcase.
1364 2014-12-13 Jan Kratochvil <jan.kratochvil@redhat.com>
1367 * gdb.base/vla-stub-define.c: New file.
1368 * gdb.base/vla-stub.c: New file.
1369 * gdb.base/vla-stub.exp: New file.
1371 2014-12-12 Phil Muldoon <pmuldoon@redhat.com>
1372 Jan Kratochvil <jan.kratochvil@redhat.com>
1373 Tom Tromey <tromey@redhat.com>
1375 * configure.ac: Add gdb.compile/.
1376 * configure: Regenerate.
1377 * gdb.compile/Makefile.in: New file.
1378 * gdb.compile/compile-ops.exp: New file.
1379 * gdb.compile/compile-ops.c: New file.
1380 * gdb.compile/compile-tls.c: New file.
1381 * gdb.compile/compile-tls.exp: New file.
1382 * gdb.compile/compile-constvar.S: New file.
1383 * gdb.compile/compile-constvar.c: New file.
1384 * gdb.compile/compile-mod.c: New file.
1385 * gdb.compile/compile-nodebug.c: New file.
1386 * gdb.compile/compile-setjmp-mod.c: New file.
1387 * gdb.compile/compile-setjmp.c: New file.
1388 * gdb.compile/compile-setjmp.exp: New file.
1389 * gdb.compile/compile-shlib.c: New file.
1390 * gdb.compile/compile.c: New file.
1391 * gdb.compile/compile.exp: New file.
1392 * lib/gdb.exp (skip_compile_feature_tests): New proc.
1394 2014-12-12 Tom Tromey <tromey@redhat.com>
1396 * lib/dwarf.exp (_location): Ignore blank lines. Allow comments.
1397 Handle DW_OP_pick, DW_OP_skip, DW_OP_bra.
1399 2014-12-12 Doug Evans <dje@google.com>
1401 * lib/gdb-python.exp (get_python_valueof): New function.
1402 * gdb.python/py-objfile.exp: Add tests for gdb.lookup_objfile.
1404 2014-12-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
1406 * gdb.base/completion.exp: Add test for completion of "info
1409 2014-12-12 Maciej W. Rozycki <macro@codesourcery.com>
1411 * gdb.base/func-ptrs.c: New file.
1412 * gdb.base/func-ptrs.exp: New file.
1414 2014-12-10 Simon Marchi <simon.marchi@ericsson.com>
1416 PR breakpoints/17012
1417 * gdb.base/dprintf-detach.c: New file.
1418 * gdb.base/dprintf-detach.exp: New file.
1420 2014-12-10 Simon Marchi <simon.marchi@ericsson.com>
1422 * gdb.trace/qtro.exp: Replace gdbserver detection code by...
1423 * lib/gdb.exp (target_is_gdbserver): New procedure.
1425 2014-12-08 Doug Evans <dje@google.com>
1427 * gdb.python/py-objfile.exp: Add tests for objfile.owner.
1429 2014-12-05 Yao Qi <yao@codesourcery.com>
1431 * gdb.guile/scm-error.exp: Remove the third argument to
1432 gdb_remote_download.
1433 * gdb.guile/scm-frame-args.exp: Likewise.
1434 * gdb.guile/scm-section-script.exp: Likewise.
1436 2014-12-05 Yao Qi <yao@codesourcery.com>
1438 * gdb.arch/i386-bp_permanent.exp: Use standard_testfile.
1440 2014-12-04 Doug Evans <dje@google.com>
1442 * gdb.python/py-objfile.exp: Add tests for
1443 objfile.add_separate_debug_file.
1445 2014-12-04 Doug Evans <dje@google.com>
1447 * lib/gdb.exp (get_build_id): New function.
1448 (build_id_debug_filename_get): Rewrite to use it.
1449 * gdb.python/py-objfile.exp: Add test for objfile.build_id.
1451 2014-12-04 Maciej W. Rozycki <macro@codesourcery.com>
1453 * gdb.cp/expand-psymtabs-cxx.exp: Accept any address of
1454 `method(long)', not just 0x0.
1455 * gdb.cp/nsalias.exp: Align code labels to 4.
1456 * gdb.dwarf2/dw2-canonicalize-type.S (main): Expand to 4-bytes.
1457 * gdb.dwarf2/dw2-empty-pc-range.S (main): Likewise.
1458 * gdb.dwarf2/pr11465.S (_ZN1N1cE): Likewise.
1459 * gdb.dwarf2/dw2-case-insensitive.c (START_INSNS): New macro.
1460 (cu_text_start, FUNC_lang_start): Use `START_INSNS'.
1461 * gdb.dwarf2/dw2-stack-boundary.exp: Accept noise in complaints.
1463 2014-12-02 Doug Evans <dje@google.com>
1466 * gdb.cp/anon-ns.cc: Move guts of this file to ...
1467 * gdb.cp/anon-ns2.cc: ... here. New file.
1468 * gdb.cp/anon-ns.exp: Update.
1470 2014-12-02 Nick Bull <nicholaspbull@gmail.com>
1472 * gdb.python/py-events.py (inferior_call_handler): New.
1473 (register_changed_handler, memory_changed_handler): New.
1474 (test_events.invoke): Register new handlers.
1475 * gdb.python/py-events.exp: Add tests for inferior call,
1476 memory_changed and register_changed events.
1478 2014-12-02 Andreas Arnez <arnez@linux.vnet.ibm.com>
1480 * gdb.base/execl-update-breakpoints.exp: Specify the link address
1481 with '-Ttext-segment' instead of '-Ttext'. Fall back to '-Ttext'
1482 if the linker doesn't understand this.
1484 2014-12-01 Simon Marchi <simon.marchi@ericsson.com>
1486 * gdb.python/python.exp: Change expected reply to help().
1488 2014-12-01 Yao Qi <yao@codesourcery.com>
1490 * configure.ac: Remove AC_ARG_ENABLE for gdbtk. Don't invoke
1491 AC_CONFIG_SUBDIRS(gdb.gdbtk).
1492 * configure: Re-generated.
1494 2014-11-28 Siva Chandra Reddy <sivachandra@google.com>
1496 * gdb.cp/chained-calls.cc: New file.
1497 * gdb.cp/chained-calls.exp: New file.
1498 * gdb.cp/smartp.exp: Remove KFAIL for "p c2->inta".
1500 2014-11-28 Simon Marchi <simon.marchi@ericsson.com>
1502 * gdb.ada/py_range.exp: Add parentheses to python calls to print.
1503 * gdb.dwarf2/symtab-producer.exp: Same.
1504 * gdb.gdb/python-interrupts.exp: Same.
1505 * gdb.gdb/python-selftest.exp: Same.
1506 * gdb.python/py-linetable.exp: Same.
1507 * gdb.python/py-type.exp: Same.
1508 * gdb.python/py-value-cc.exp: Same.
1509 * gdb.python/py-value.exp: Same.
1511 2014-11-28 Yao Qi <yao@codesourcery.com>
1513 * gdb.base/break-probes.exp: Match library name prefixed with
1516 2014-11-27 Simon Marchi <simon.marchi@ericsson.com>
1518 * gdb.python/py-linetable.exp: Escape properly sorted(fset)
1519 test expected output. Add parentheses for the call to print.
1520 Remove L suffix from integers.
1522 2014-11-26 Doug Evans <dje@google.com>
1524 * gdb.dwarf2/dw2-op-out-param.S: Fix comment.
1526 2014-11-22 Yao Qi <yao@codesourcery.com>
1528 * gdb.trace/entry-values.c: Remove asms.
1529 (foo): Add foo_label.
1530 (bar): Add bar_label.
1531 * gdb.trace/entry-values.exp: Remove code computing foo's
1532 length and bar's length.
1533 (Dwarf::assemble): Invoke function_range for bar and use
1534 MACRO_AT_func for foo.
1536 2014-11-22 Yao Qi <yao@codesourcery.com>
1538 * gdb.dwarf2/dw2-compdir-oldgcc.S: Define label .Lgcc42_procstart
1539 and .Lgcc43_procstart. Use .Lgcc42_procstart instead of gcc42.
1540 Use .Lgcc43_procstart instead of gcc43.
1542 2014-11-21 Joel Brobecker <brobecker@adacore.com>
1544 * gdb.ada/n_arr_bound: New testcase.
1546 2014-11-20 Sergio Durigan Junior <sergiodj@redhat.com>
1548 PR breakpoints/10737
1549 * gdb.base/catch-syscall.exp (do_syscall_tests): Call
1550 test_catch_syscall_multi_arch.
1551 (test_catch_syscall_multi_arch): New function.
1553 2014-11-20 Doug Evans <xdje42@gmail.com>
1555 * gdb.base/maint.exp: Update expected output.
1557 2014-11-19 Andreas Arnez <arnez@linux.vnet.ibm.com>
1559 * gdb.base/bp-permanent.c (NOP): Define as 2-byte instead of
1560 4-byte instruction on S390.
1562 2014-11-19 Joel Brobecker <brobecker@adacore.com>
1564 * gdb.ada/arr_arr: New testcase.
1566 2014-11-19 Joel Brobecker <brobecker@adacore.com>
1568 * gdb.ada/pkd_arr_elem: New Testcase.
1570 2014-11-18 Luis Machado <lgustavo@codesourcery.com>
1572 * gdb.reverse/break-precsave: Expect completion message for
1574 * gdb.reverse/consecutive-precsave.exp: Likewise.
1575 * gdb.reverse/finish-precsave.exp: Likewise.
1576 * gdb.reverse/i386-precsave.exp: Likewise.
1577 * gdb.reverse/machinestate-precsave.exp: Likewise.
1578 * gdb.reverse/sigall-precsave.exp: Likewise.
1579 * gdb.reverse/solib-precsave.exp: Likewise.
1580 * gdb.reverse/step-precsave.exp: Likewise.
1581 * gdb.reverse/until-precsave.exp: Likewise.
1582 * gdb.reverse/watch-precsave.exp: Likewise.
1584 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1586 * gdb.base/bp-permanent.c: Include unistd.h.
1587 * gdb.python/py-framefilter-mi.c (main): Add return type.
1588 * gdb.python/py-framefilter.c (main): Likewise.
1589 * gdb.trace/actions-changed.c (main): Likewise.
1591 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1593 * gdb.mi/until.c: Add eye-catchers.
1594 * gdb.mi/mi-until.exp: Refer to eye-catchers instead of literal
1597 2014-11-17 Andreas Arnez <arnez@linux.vnet.ibm.com>
1599 * gdb.base/condbreak.exp: Drop references to removed non-prototype
1600 function header variants in break1.c.
1601 * gdb.base/ena-dis-br.exp: Likewise.
1602 * gdb.base/hbreak2.exp: Likewise.
1603 * gdb.reverse/until-precsave.exp: Drop references to removed
1604 non-prototype function header variants in ur1.c.
1605 * gdb.reverse/until-reverse.exp: Likewise.
1607 2014-11-17 Petr Machata <pmachata@redhat.com>
1609 * lib/dwarf.exp (Dwarf::cu, Dwarf::tu): Emit
1610 ${_cu_offset_size} bytes abbrev offset.
1612 2014-11-15 Doug Evans <xdje42@gmail.com>
1615 * gdb.base/line-symtabs.exp: New file.
1616 * gdb.base/line-symtabs.c: New file.
1617 * gdb.base/line-symtabs.h: New file.
1619 2014-11-14 Yao Qi <yao@codesourcery.com>
1621 * gdb.dwarf2/dw2-ifort-parameter.c: Remove inline asm.
1622 (func): Add label func_label.
1623 * gdb.dwarf2/dw2-ifort-parameter.exp (Dwarf::assemble):
1624 Replace low_pc and high_pc with MACRO_AT_range.
1625 Replace name, low_pc and high_pc with MACRO_AT_func.
1627 2014-11-14 Yao Qi <yao@codesourcery.com>
1629 * gdb.dwarf2/implptr-optimized-out.exp (Dwarf::assemble):
1630 Replace name, low_pc and high_pc with MACRO_AT_func.
1632 2014-11-14 Yao Qi <yao@codesourcery.com>
1634 * gdb.dwarf2/implptr-optimized-out.exp: Use Dwarf::assemble to
1635 produce debug information.
1636 * gdb.dwarf2/implptr-optimized-out.S: Removed.
1638 2014-11-14 Yao Qi <yao@codesourcery.com>
1640 * gdb.dwarf2/dwz.exp: Remove the code to compile main.c to
1641 object and get function length.
1642 (Dwarf::assemble): Replace name, low_pc and high_pc attributes
1644 (top-level): Replace gdb_compile and clean_restart with
1645 prepare_for_testing.
1646 * gdb.dwarf2/main.c (main): Add label main_label.
1648 2014-11-14 Yao Qi <yao@codesourcery.com>
1650 * lib/dwarf.exp (function_range): New procedure.
1651 (Dwarf::_handle_macro_at_func): New procedure.
1652 (Dwarf::_handle_macro_at_range): New procedure.
1653 (Dwarf): Handle MACRO_AT_func and MACRO_AT_range.
1655 2014-11-14 Yao Qi <yao@codesourcery.com>
1657 * lib/dwarf.exp (_handle_DW_TAG): Move some code to ...
1658 (_handle_attribute): New procedure.
1660 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1662 * gdb.ada/cond_lang/foo.c (callme): Add return type.
1663 * gdb.base/call-sc.c (zed): Likewise.
1664 * gdb.base/checkpoint.c (main): Likewise.
1665 * gdb.base/dump.c (main): Likewise.
1666 * gdb.base/gcore.c (main): Likewise.
1667 * gdb.base/huge.c (main): Likewise.
1668 * gdb.base/multi-forks.c (main): Likewise.
1669 * gdb.base/pr10179-a.c (main): Likewise.
1670 * gdb.base/savedregs.c (main): Likewise.
1671 * gdb.base/sigaltstack.c (main): Likewise.
1672 * gdb.base/siginfo.c (main): Likewise.
1673 * gdb.base/structs.c (zed): Likewise.
1674 * gdb.mi/mi-stack.c (callee3, callee2, callee1, main): Likewise.
1675 * gdb.mi/mi-syn-frame.c (main): Likewise.
1676 * gdb.mi/until.c (foo, main): Likewise.
1677 * gdb.base/global-var-nested-by-dso.c (b_main, c_main): Declare.
1678 * gdb.base/solib-weak.c (foo): Declare.
1679 * gdb.base/attach-twice.c: Include stdio.h.
1680 * gdb.base/weaklib1.c: Likewise.
1681 * gdb.base/weaklib2.c: Likewise.
1682 * gdb.base/catch-signal-fork.c: Include stdio.h and sys/wait.h.
1683 * gdb.mi/mi-condbreak-call-thr-state-mt.c: Include stdio.h and
1685 * gdb.base/attach-pie-misread.c: Include stdlib.h.
1686 * gdb.mi/mi-exit-code.c: Likewise.
1687 * gdb.base/break-interp-lib.c: Include string.h.
1688 * gdb.base/coremaker.c: Likewise.
1689 * gdb.base/testenv.c: Likewise.
1690 * gdb.python/py-finish-breakpoint.c: Likewise.
1691 * gdb.base/inferior-died.c: Include sys/wait.h.
1692 * gdb.base/fileio.c: Include time.h.
1693 * gdb.base/async-shell.c: Include unistd.h.
1694 * gdb.base/dprintf-non-stop.c: Likewise.
1695 * gdb.base/info-os.c: Likewise.
1696 * gdb.mi/mi-console.c: Likewise.
1697 * gdb.mi/watch-nonstop.c: Likewise.
1698 * gdb.python/py-events.c: Likewise.
1699 * gdb.base/async.c (baz): Move up before its invocation.
1700 * gdb.base/code_elim2.c (my_global_func): Likewise.
1701 * gdb.base/skip-solib-lib.c (multiply): Likewise.
1702 * gdb.base/advance.c (func2): Likewise.
1704 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1706 * gdb.base/annota1.c: Remove #ifdef PROTOTYPES, keep prototyped
1708 * gdb.base/annota3.c: Likewise.
1709 * gdb.base/async.c: Likewise.
1710 * gdb.base/average.c: Likewise.
1711 * gdb.base/call-ar-st.c: Likewise.
1712 * gdb.base/call-rt-st.c: Likewise.
1713 * gdb.base/call-sc.c: Likewise.
1714 * gdb.base/call-strs.c: Likewise.
1715 * gdb.base/ending-run.c: Likewise.
1716 * gdb.base/execd-prog.c: Likewise.
1717 * gdb.base/exprs.c: Likewise.
1718 * gdb.base/foll-exec.c: Likewise.
1719 * gdb.base/foll-fork.c: Likewise.
1720 * gdb.base/foll-vfork.c: Likewise.
1721 * gdb.base/funcargs.c: Likewise.
1722 * gdb.base/gcore.c: Likewise.
1723 * gdb.base/jump.c: Likewise.
1724 * gdb.base/langs0.c: Likewise.
1725 * gdb.base/langs1.c: Likewise.
1726 * gdb.base/langs2.c: Likewise.
1727 * gdb.base/mips_pro.c: Likewise.
1728 * gdb.base/nodebug.c: Likewise.
1729 * gdb.base/opaque0.c: Likewise.
1730 * gdb.base/opaque1.c: Likewise.
1731 * gdb.base/recurse.c: Likewise.
1732 * gdb.base/run.c: Likewise.
1733 * gdb.base/scope0.c: Likewise.
1734 * gdb.base/scope1.c: Likewise.
1735 * gdb.base/setshow.c: Likewise.
1736 * gdb.base/setvar.c: Likewise.
1737 * gdb.base/shmain.c: Likewise.
1738 * gdb.base/shr1.c: Likewise.
1739 * gdb.base/shr2.c: Likewise.
1740 * gdb.base/sigall.c: Likewise.
1741 * gdb.base/signals.c: Likewise.
1742 * gdb.base/so-indr-cl.c: Likewise.
1743 * gdb.base/solib2.c: Likewise.
1744 * gdb.base/structs.c: Likewise.
1745 * gdb.base/sum.c: Likewise.
1746 * gdb.base/vforked-prog.c: Likewise.
1747 * gdb.base/watchpoint.c: Likewise.
1748 * gdb.reverse/shr2.c: Likewise.
1749 * gdb.reverse/until-reverse.c: Likewise.
1750 * gdb.reverse/ur1.c: Likewise.
1751 * gdb.reverse/watch-reverse.c: Likewise.
1753 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1755 * gdb.base/sepdebug.c: Remove #ifdef PROTOTYPES, keep prototyped
1757 * gdb.base/sepdebug.exp: Drop references to removed code.
1759 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1761 * gdb.base/list0.h: Remove #ifdef PROTOTYPES, keep prototyped
1762 variant. Preserve original line numbering.
1763 * gdb.base/list1.c: Likewise.
1765 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1767 * gdb.base/break.c: Remove #ifdef PROTOTYPES, keep prototyped
1769 * gdb.base/break1.c: Likewise.
1770 * gdb.base/break.exp: Drop references to removed code.
1772 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1774 * gdb.base/solib1.c: Remove #ifdef PROTOTYPES, keep prototyped
1777 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1779 * gdb.base/callfuncs.exp (perform_all_tests): Re-indent.
1781 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1783 * gdb.base/callfuncs.exp: Remove 'prototypes' variable. Move main
1784 logic into perform_all_tests() and invoke it with and without
1785 function header prototypes.
1786 (do_function_calls): Remove conditional XFAIL for PR 5318.
1787 (rerun_and_prepare): Remove duplicate code.
1788 (perform_all_tests): New. Main logic moved here.
1790 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1792 * gdb.base/callfuncs.c (t_float_many_args): Fix syntax error in
1793 code guarded by #ifdef NO_PROTOTYPES.
1794 (t_double_many_args): Likewise.
1795 (DEF_FUNC_MANY_ARGS_1): Likewise.
1796 (DEF_FUNC_VALUES_1): Likewise.
1797 (t_structs_ldc): Renamed from t_structs_fc in conditional code
1798 guarded by #ifdef PROTOTYPES.
1800 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1802 * gdb.mi/mi-console.c: Add eye-catcher.
1803 * gdb.mi/mi-console.exp (semihosted_string): Refer to eye-catcher
1804 instead of literal line number.
1806 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1808 * gdb.base/shr2.c: Add eye-catcher.
1809 * gdb.base/shlib-call.exp: Refer to eye-catcher instead of literal
1812 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1814 * gdb.base/jump.c: Add eye-catchers.
1815 * gdb.base/jump.exp: Refer to eye-catchers instead of literal line
1818 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1820 * gdb.base/execd-prog.c: Add eye-catchers.
1821 * gdb.base/foll-exec.c: Likewise.
1822 * gdb.base/foll-exec.exp: Refer to eye-catchers instead of literal
1825 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1827 * gdb.base/ending-run.c: Add eye-catchers.
1828 * gdb.base/ending-run.exp: Refer to eye-catchers instead of
1829 literal line numbers.
1831 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1833 * gdb.base/call-rt-st.c: Add eye-catchers.
1834 * gdb.base/call-rt-st.exp: Refer to eye-catchers instead of
1835 literal line numbers.
1837 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1839 * gdb.base/call-ar-st.c: Add eye-catchers.
1840 * gdb.base/call-ar-st.exp: Refer to eye-catchers instead of
1841 literal line numbers.
1843 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1845 * gdb.base/average.c: Add eye-catchers.
1846 * gdb.base/sum.c: Likewise.
1847 * gdb.base/dbx.exp: Use eye-catchers to determine line numbers for
1848 regexps dynamically.
1850 2014-11-13 Andreas Arnez <arnez@linux.vnet.ibm.com>
1852 * gdb.base/solib1.c: Add eye-catchers.
1853 * gdb.base/so-impl-ld.exp: Match against eye-catchers instead of
1854 literal line numbers.
1856 2014-11-12 Pedro Alves <palves@redhat.com>
1858 * gdb.threads/leader-exit.exp: Test sending ctrl-c works after the
1861 2014-11-12 Pedro Alves <palves@redhat.com>
1863 * gdb.arch/i386-bp_permanent.c: New file.
1864 * gdb.arch/i386-bp_permanent.exp: Don't skip on x86_64.
1865 (srcfile): Set to i386-bp_permanent.c.
1866 (top level): Adjust to work in both 32-bit and 64-bit modes. Test
1867 that stepi does not execute the 'leave' instruction, instead of
1868 testing it does execute.
1869 * gdb.base/bp-permanent.c: New file.
1870 * gdb.base/bp-permanent.exp: New file.
1872 2014-11-10 Doug Evans <xdje42@gmail.com>
1875 * gdb.base/symtab-search-order.exp: New file.
1876 * gdb.base/symtab-search-order.c: New file.
1877 * gdb.base/symtab-search-order-1.c: New file.
1878 * gdb.base/symtab-search-order-shlib-1.c: New file.
1880 2014-11-07 Pedro Alves <palves@redhat.com>
1883 * gdb.base/sigstep.exp (in_handler_map) <si+advance>: xfail
1886 2014-11-03 Siva Chandra Reddy <sivachandra@google.com>
1889 * gdb.cp/pr17494.cc: New file.
1890 * gdb.cp/pr17494.exp: New file.
1892 2014-11-02 Yao Qi <yao@codesourcery.com>
1894 * gdb.python/python.exp: Get working directory and match the
1895 output of "set extended-prompt \\w " with it.
1897 2014-10-30 Doug Evans <dje@google.com>
1899 * gdb.python/py-objfile.exp: Add tests for setting random attributes
1901 * gdb.python/py-progspace.exp: Add tests for setting random attributes
1904 2014-10-30 Janis Johnson <janisjo@codesourcery.com>
1906 * gdb.base/fullpath-expand.exp: Skip for a remote host.
1907 * gdb.base/realname-expand.exp: Likewise.
1908 * gdb.linespec/macro-relative.exp: Likewise.
1910 2014-10-29 Pedro Alves <palves@redhat.com>
1913 * gdb.threads/schedlock.c (some_function): New function.
1914 (call_function): New global.
1915 (MAYBE_CALL_SOME_FUNCTION): New macro.
1916 (thread_function): Call it.
1917 * gdb.threads/schedlock.exp (get_args): Add description parameter,
1918 and use it instead of a global counter. Adjust all callers.
1919 (get_current_thread): Use "find current thread" for test message
1920 here rather than having all callers pass down the same string.
1921 (goto_loop): New procedure, factored out from ...
1922 (my_continue): ... this.
1923 (step_ten_loops): Change parameter from test message to command to
1925 (list_count): Delete global.
1926 (check_result): New procedure, factored out from duplicate top
1928 (continue tests): Wrap in with_test_prefix.
1929 (test_step): New procedure, factored out from duplicate top level
1931 (top level): Test "step" in combination with all scheduler-locking
1932 modes. Test "next" in combination with all scheduler-locking
1933 modes, and in combination with stepping over a function call or
1935 * gdb.threads/next-bp-other-thread.c: New file.
1936 * gdb.threads/next-bp-other-thread.exp: New file.
1938 2014-10-29 Pedro Alves <palves@redhat.com>
1941 * gdb.python/python.exp: Test a multi-line command that spawns
1943 * gdb.base/multi-line-starts-subshell.exp: New file.
1945 2014-10-29 Yao Qi <yao@codesourcery.com>
1947 * gdb.base/fileio.exp: Make directories on host.
1949 2014-10-29 Yao Qi <yao@codesourcery.com>
1951 * gdb.base/fileio.c (test_write): Close the file.
1953 2014-10-28 Pedro Alves <palves@redhat.com>
1956 * gdb.base/sigstep.c (no_handler): New global.
1957 (main): If 'no_handler is true, set the signal handlers to
1959 * gdb.base/sigstep.exp (breakpoint_over_handler): Add
1960 with_sw_watch and no_handler parameters. Handle them.
1961 (top level) <stepping over handler when stopped at a breakpoint
1962 test>: Add a test axis for testing with a software watchpoint, and
1963 another for testing with the signal handler set to SIG_IGN.
1964 * gdb.base/step-sw-breakpoint-adjust-pc.c: New file.
1965 * gdb.base/step-sw-breakpoint-adjust-pc.exp: New file.
1967 2014-10-28 Pedro Alves <palves@redhat.com>
1970 * gdb.base/sigstep.c (handler): Add a few more writes to 'done'.
1971 * gdb.base/sigstep.exp (other_handler_location): New global.
1972 (advance): Support stepping into the signal handler, and running
1973 commands while in the handler.
1974 (in_handler_map): New global.
1975 (top level): In the advance test, add combinations for getting
1976 into the handler with stepping commands, and for running commands
1977 in the handler. Add comment descripting the advancei tests.
1979 2014-10-28 Pedro Alves <palves@redhat.com>
1981 * gdb.base/sigstep.exp: Use build_executable instead of
1982 prepare_for_testing.
1983 (top level): Move code that starts GDB, runs to main and creates a
1985 (restart): ... this new procedure.
1986 (top level): Move backtrace from signal handler test to ...
1987 (validate_backtrace): ... this new procedure.
1988 (advance, advancei): Rename parameter from 'i' to 'cmd'. Use
1989 with_test_prefix. Always restart GDB.
1990 (skip_to_handler): Rename parameter from 'i' to 'cmd'. Use
1991 with_test_prefix. Always restart GDB. No need to delete
1992 breakpoints after the test.
1993 (test_skip_handler): Remove prefix parameter.
1994 (skip_over_handler, breakpoint_to_handler)
1995 (breakpoint_to_handler_entry, breakpoint_over_handler): Rename
1996 parameter from 'i' to 'cmd'. Use with_test_prefix. Always
1997 restart GDB. No need to delete breakpoints after the test.
1998 (top level): Use foreach to call the test procedures with
2001 2014-10-28 Pedro Alves <palves@redhat.com>
2003 * gdb.base/sigaltstack.exp: Update to use Bugzilla bug numbers
2004 instead of GNATS numbers.
2005 * gdb.base/sigbpt.exp: Likewise.
2006 * gdb.base/siginfo.exp: Likewise.
2007 * gdb.base/sigstep.exp: Likewise.
2009 2014-10-27 Pedro Alves <palves@redhat.com>
2011 * gdb.base/sigstep.c (dummy): New global.
2012 (main): Issue a couple writes to the new global.
2013 * gdb.base/sigstep.exp (get_next_pc, test_skip_handler): New
2015 (skip_over_handler): Use test_skip_handler.
2016 (top level): Call skip_over_handler for stepi and nexti too.
2017 (breakpoint_over_handler): Use test_skip_handler.
2018 (top level): Call breakpoint_over_handler for stepi and nexti too.
2020 2014-10-27 Yao Qi <yao@codesourcery.com>
2022 * gdb.trace/tfile.c (adjust_function_address)
2023 [__powerpc64__ && _CALL_ELF != 2]: Get function address from
2024 function descriptor.
2026 2014-10-24 Don Breazeal <donb@codesourcery.com>
2028 * gdb.base/foll-fork.exp (test_follow_fork,
2029 catch_fork_child_follow): Check for updated fork messages emitted
2031 * gdb.base/foll-vfork.exp (vfork_parent_follow_through_step,
2032 vfork_parent_follow_to_bp, vfork_and_exec_child_follow_to_main_bp,
2033 vfork_and_exec_child_follow_through_step): Check for updated vfork
2034 messages emitted from infrun.c.
2036 2014-10-24 Pedro Alves <palves@redhat.com>
2038 * gdb.base/corefile.exp: Remove references to ultrix.
2039 * gdb.base/interrupt.exp: Likewise.
2040 * gdb.base/whatis.exp: Likewise.
2041 * gdb.gdb/selftest.exp: Likewise.
2042 * gdb.threads/manythreads.exp: Likewise.
2043 * gdb.threads/print-threads.exp: Likewise.
2044 * gdb.threads/pthreads.exp:: Likewise.
2045 * gdb.threads/schedlock.exp: Likewise.
2047 2014-10-24 Siva Chandra Reddy <sivachandra@google.com>
2049 * gdb.cp/non-trivial-retval.cc: Add a test case.
2050 * gdb.cp/non-trivial-retval.exp: Add a test.
2052 2014-10-20 Yao Qi <yao@codesourcery.com>
2054 * gdb.python/py-objfile-script-gdb.py.in: Rename it to ...
2055 * gdb.python/py-objfile-script-gdb.py: New file.
2056 * gdb.python/py-objfile-script.exp: Update reference to
2057 py-objfile-script-gdb.py.in. Use gdb_remote_donwload instead
2058 of remote_download. Remove the dest file.
2060 2014-10-20 Yao Qi <yao@codesourcery.com>
2062 * gdb.base/checkpoint.exp: Don't remove file copied on host.
2063 * gdb.base/step-line.exp: Likewise.
2064 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
2065 * gdb.dwarf2/dw2-basic.exp: Likewise.
2066 * gdb.dwarf2/dw2-compressed.exp: Likewise.
2067 * gdb.dwarf2/dw2-filename.exp: Likewise.
2068 * gdb.dwarf2/dw2-intercu.exp: Likewise.
2069 * gdb.dwarf2/dw2-intermix.exp: Likewise.
2070 * gdb.dwarf2/dw2-producer.exp: Likewise.
2071 * gdb.dwarf2/mac-fileno.exp: Likewise.
2072 * gdb.python/py-frame-args.exp: Likewise.
2073 * gdb.python/py-framefilter.exp: Likewise.
2074 * gdb.python/py-mi.exp: Likewise.
2075 * gdb.python/py-objfile-script.exp: Likewise
2076 * gdb.python/py-pp-integral.exp: Likewise.
2077 * gdb.python/py-pp-re-notag.exp: Likewise.
2078 * gdb.python/py-prettyprint.exp: Likewise.
2079 * gdb.python/py-section-script.exp: Likewise.
2080 * gdb.python/py-typeprint.exp: Likewise.
2081 * gdb.python/py-xmethods.exp: Likewise.
2082 * gdb.stabs/weird.exp: Likewise.
2083 * gdb.xml/tdesc-regs.exp: Likewise.
2085 2014-10-18 Kwok Cheung Yeung <kcy@codesourcery.com>
2087 * gdb.dwarf2/dw2-dir-file-name.exp (addr_len): New.
2088 (out_cu): Use addr_len for the size of addresses.
2089 (out_line): Likewise. Size DW_LNE_set_address instruction
2090 according to addr_len.
2091 * gdb.dwarf2/dw2-dir-file-name.c (START_INSNS): New.
2092 (FUNC): Add START_INSNS to definition.
2094 2014-10-18 Yao Qi <yao@codesourcery.com>
2096 * gdb.base/argv0-symlink.exp: Check argv[0] value if
2097 gdb_has_argv0 return true.
2098 * gdb.guile/scm-value.exp (test_value_in_inferior): Don't
2099 check [target_info exists noargs], check [gdb_has_argv0]
2101 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
2102 * lib/gdb.exp (gdb_has_argv0, gdb_has_argv0_1): New
2105 2014-10-17 Doug Evans <dje@google.com>
2107 * gdb.python/py-events.exp: Update expected output for clear_objfiles
2109 * gdb.python/py-events.py: Add clear_objfiles event.
2111 2014-10-17 Doug Evans <dje@google.com>
2113 * gdb.python/py-objfile.exp: Test progspace attribute.
2115 2014-10-17 Luis Machado <lgustavo@codesourcery.com>
2117 * gdb.guile/scm-breakpoint.exp: Do not assume any
2118 directory separators when matching source file paths.
2119 * gdb.python/py-breakpoint.exp: Likewise.
2120 * gdb.reverse/break-precsave.exp: Likewise.
2121 * gdb.reverse/break-reverse.exp: Likewise.
2122 * gdb.reverse/consecutive-precsave.exp: Likewise.
2123 * gdb.reverse/finish-precsave.exp: Likewise.
2124 * gdb.reverse/finish-reverse-bkpt.exp: Likewise.
2125 * gdb.reverse/finish-reverse.exp: Likewise.
2126 * gdb.reverse/i386-precsave.exp: Likewise.
2127 * gdb.reverse/i387-env-reverse.exp: Likewise.
2128 * gdb.reverse/i387-stack-reverse.exp: Likewise.
2129 * gdb.reverse/machinestate-precsave.exp: Likewise.
2130 * gdb.reverse/machinestate.exp: Likewise.
2131 * gdb.reverse/sigall-precsave.exp: Likewise.
2132 * gdb.reverse/solib-precsave.exp: Likewise.
2133 * gdb.reverse/step-precsave.exp: Likewise.
2134 * gdb.reverse/until-precsave.exp: Likewise.
2135 * gdb.reverse/watch-precsave.exp: Likewise.
2136 * gdb.reverse/watch-reverse.exp: Likewise.
2138 2014-10-17 Yao Qi <yao@codesourcery.com>
2140 * lib/gdb.exp (gdb_skip_xml_test): Copy trivial.xml to host.
2141 * gdb.xml/tdesc-regs.exp: Copy single-reg.xml to host.
2143 2014-10-17 Pedro Alves <palves@redhat.com>
2146 * gdb.base/bg-execution-repeat.c: New file.
2147 * gdb.base/bg-execution-repeat.exp: New file.
2149 2014-10-17 Pedro Alves <palves@redhat.com>
2152 * gdb.base/continue-all-already-running.c: New file.
2153 * gdb.base/continue-all-already-running.exp: New file.
2155 2014-10-17 Pedro Alves <palves@redhat.com>
2158 * gdb.base/annota-input-while-running.c: New file.
2159 * gdb.base/annota-input-while-running.exp: New file.
2161 2014-10-17 Pedro Alves <palves@redhat.com>
2163 * gdb.base/callfuncs.exp: emove references to osf.
2164 * gdb.base/sigall.exp: Likewise.
2165 * gdb.gdb/selftest.exp: Likewise.
2166 * gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
2167 * gdb.mi/non-stop.c: Likewise.
2168 * gdb.mi/pthreads.c: Likewise.
2169 * gdb.reverse/sigall-precsave.exp: Likewise.
2170 * gdb.reverse/sigall-reverse.exp: Likewise.
2171 * gdb.threads/pthreads.c: Likewise.
2172 * gdb.threads/pthreads.exp: Likewise.
2174 2014-10-17 Yao Qi <yao@codesourcery.com>
2176 * gdb.base/commands.exp (gdbvar_complex_if_while_test): Don't
2177 check 'target_info exists noargs'.
2178 (test_command_prompt_position): Likewise.
2179 (progvar_simple_if_test): Don't check 'target_info exists noargs'.
2181 (progvar_simple_while_test): Likewise.
2182 (progvar_complex_if_while_test): Likewise.
2183 (if_while_breakpoint_command_test): Likewise.
2184 (infrun_breakpoint_command_test): Likewise.
2185 (breakpoint_command_test): Likewise.
2186 (watchpoint_command_test): Likewise.
2187 (bp_deleted_in_command_test): Likewise.
2188 (temporary_breakpoint_commands): Likewise.
2190 2014-10-16 Yao Qi <yao@codesourcery.com>
2192 * gdb.base/remotetimeout.exp: Remove noargs checking.
2194 2014-10-15 Pedro Alves <palves@redhat.com>
2197 * gdb.base/breakpoint-in-ro-region.c (main): Add more instructions.
2198 * gdb.base/breakpoint-in-ro-region.exp
2199 (probe_target_hardware_step): New procedure.
2200 (top level): Probe hardware stepping and hardware breakpoint
2201 support. Test stepping through a read-only region, with both
2202 "breakpoint auto-hw" on and off and both "always-inserted" on and
2205 2014-10-15 Iain Buclaw <ibuclaw@gdcproject.org>
2207 * gdb.dlang/demangle.exp: Update for demangling changes.
2209 2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
2211 * gdb.cp/non-trivial-retval.cc: Add new test cases.
2212 * gdb.cp/non-trivial-retval.exp: Add new tests.
2214 2014-10-15 Siva Chandra Reddy <sivachandra@google.com>
2218 * gdb.cp/non-trivial-retval.cc: New file.
2219 * gdb.cp/non-trivial-retval.exp: New file.
2221 2014-10-15 Yao Qi <yao@codesourcery.com>
2223 * gdb.python/py-parameter.exp: Don't match $srcdir/$subdir on
2226 2014-10-15 Yao Qi <yao@codesourcery.com>
2228 * gdb.python/py-symbol.exp: Match file base name if host is
2229 remote, otherwise match file name with dir name.
2230 * gdb.python/py-symtab.exp: Likewise.
2231 * gdb.python/python.exp: Likewise.
2233 2014-10-15 Yao Qi <yao@codesourcery.com>
2235 * gdb.python/py-symbol.exp: Remove trailing ".*" in the
2237 * gdb.python/py-symtab.exp: Likewise.
2238 * gdb.python/python.exp: Remove trailing ".*". Fix typo
2241 2014-10-14 Joel Brobecker <brobecker@adacore.com>
2243 * gdb.ada/addr_arith: New testcase.
2245 2014-10-14 Maciej W. Rozycki <macro@codesourcery.com>
2247 * gdb.dwarf2/dw2-case-insensitive-debug.S: Handle 64-bit pointers.
2248 * gdb.dwarf2/dw2-case-insensitive.exp: Update accordingly.
2249 * gdb.dwarf2/dw2-skip-prologue.S: Handle 64-bit pointers.
2250 * gdb.dwarf2/dw2-skip-prologue.exp: Update accordingly.
2252 2014-10-14 Sergio Durigan Junior <sergiodj@redhat.com>
2254 * gdb.arch/stap-eval-lang-ada.S: Likewise.
2255 * gdb.arch/stap-eval-lang-ada.c: Likewise.
2256 * gdb.arch/stap-eval-lang-ada.exp: New file.
2258 2014-10-14 Yao Qi <yao@codesourcery.com>
2260 * gdb.mi/mi-var-child.c (nothing1): New function.
2261 (nothing2): New function.
2262 (do_children_tests): Set function pointers by nothing1 and
2264 * gdb.mi/mi-var-child.exp: Step over new added statements.
2265 Update test to match the new output.
2266 * gdb.mi/var-cmd.c (nothing1): New function.
2267 (nothing2): New function.
2268 (do_children_tests): Set function pointers by nothing1 and
2270 * gdb.mi/mi-var-display.exp: Update test to match output.
2271 Step to the line specified by $line_dct_nothing.
2272 Increase the number of lines to step.
2274 2014-10-14 Yao Qi <yao@codesourcery.com>
2276 * gdb.mi/mi-var-child.exp: Use mi_varobj_update to simplify
2278 * gdb.mi/mi2-var-child.exp: Likewise.
2280 2014-10-13 Doug Evans <dje@google.com>
2282 * gdb.python/py-objfile.exp: Change name of file name test.
2284 2014-10-13 Doug Evans <dje@google.com>
2286 * gdb.dwarf2/dw2-op-out-param.S: Make DW_FORM_ref4 values be the offset
2287 from the start of the CU.
2289 2014-10-13 Jan Kratochvil <jan.kratochvil@redhat.com>
2290 Yao Qi <yao@codesourcery.com>
2292 Fix "save breakpoints" for "catch" command.
2293 * gdb.base/catch-signal.exp: Add gdb_breakpoint "main".
2294 Remove -nonewline. Match also the added "main" line.
2296 2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2298 Fix "save breakpoints" for "disable $bpnum" command.
2299 * gdb.base/save-bp.c (main): Add label.
2300 * gdb.base/save-bp.exp: Add 8th disabled breakpoint. Match it.
2302 2014-10-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2304 * gdb.base/save-bp.exp (info break): Use gdb_test_sequence.
2306 2014-10-11 Yao Qi <yao@codesourcery.com>
2308 * gdb.server/server-kill.exp: Execute command
2309 "set remote trace-status-packet on" before "tstatus".
2311 2014-10-11 Yao Qi <yao@codesourcery.com>
2313 * gdb.server/server-kill.c: Include sys/types.h and unistd.h.
2314 (main): Call getppid.
2315 * gdb.server/server-kill.exp: Set breakpoint on line "i = 0;"
2316 and continue to it. Read variable "server_pid".
2318 2014-10-11 Yao Qi <yao@codesourcery.com>
2320 * gdb.server/server-kill.exp: Remove "delete_breakpoints".
2322 2014-10-11 Yao Qi <yao@codesourcery.com>
2324 * gdb.threads/thread-find.exp: Don't execute command
2326 * gdb.threads/attach-into-signal.exp (corefunc): Likewise.
2327 * gdb.threads/linux-dp.exp: Don't check the condition
2328 $threads_created equals to zero.
2330 2014-10-10 Pedro Alves <palves@redhat.com>
2332 * gdb.base/bigcore.exp: Remove references to IRIX.
2333 * gdb.base/funcargs.exp: Likewise.
2334 * gdb.base/interrupt.exp: Likewise.
2335 * gdb.base/mips_pro.exp: Likewise.
2336 * gdb.base/nodebug.exp: Likewise.
2337 * gdb.base/setvar.exp: Likewise.
2338 * lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.
2340 2014-10-10 Jan Kratochvil <jan.kratochvil@redhat.com>
2341 Pedro Alves <palves@redhat.com>
2344 * gdb.base/vdso-warning.c: New file.
2345 * gdb.base/vdso-warning.exp: New file.
2347 2014-10-02 Doug Evans <dje@google.com>
2349 * gdb.base/structs.c (main): Don't run forever.
2351 2014-10-02 Pedro Alves <palves@redhat.com>
2353 * gdb.threads/manythreads.exp (interrupt_and_wait): New procedure.
2354 (top level) <stop threads 1, stop threads 2>: Use it.
2356 2014-10-02 Pedro Alves <palves@redhat.com>
2358 * gdb.threads/break-while-running.exp (test): Add new
2359 'update_thread_list' argument. Skip "info threads" if false.
2360 (top level): Add new 'update_thread_list' axis.
2362 2014-10-02 Pedro Alves <palves@redhat.com>
2364 PR breakpoints/17431
2365 * gdb.base/execl-update-breakpoints.c: New file.
2366 * gdb.base/execl-update-breakpoints.exp: New file.
2368 2014-10-01 Pedro Alves <palves@redhat.com>
2370 * gdb.base/breakpoint-in-ro-region.c: New file.
2371 * gdb.base/breakpoint-in-ro-region.exp: New file.
2373 2014-10-01 Simon Marchi <simon.marchi@ericsson.com>
2375 * gdb.mi/mi-exit-code.exp: New file.
2376 * gdb.mi/mi-exit-code.c: New file.
2378 2014-09-30 Yao Qi <yao@codesourcery.com>
2380 * lib/prelink-support.exp (build_executable_own_libs): Error if
2381 the target isn't native.
2383 2014-09-30 Yao Qi <yao@codesourcery.com>
2385 * gdb.threads/dlopen-libpthread.exp: Skip it if isnative is
2388 2014-09-22 Pedro Alves <palves@redhat.com>
2390 * gdb.threads/break-while-running.exp: New file.
2391 * gdb.threads/break-while-running.c: New file.
2393 2014-09-19 Yao Qi <yao@codesourcery.com>
2395 * gdb.dwarf2/dw2-var-zero-addr.exp: Move test into new proc test.
2396 Invoke test. Restart GDB with --readnow and invoke test again.
2398 2014-09-19 Yao Qi <yao@codesourcery.com>
2400 * gdb.base/break-on-linker-gcd-function.exp: Move test into new
2401 proc set_breakpoint_on_gcd_function. Invoke
2402 set_breakpoint_on_gcd_function. Restart GDB with --readnow and
2403 invoke set_breakpoint_on_gcd_function again.
2405 2014-09-18 Doug Evans <dje@google.com>
2407 * gdb.dwarf2/symtab-producer.exp: New file.
2409 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2411 * gdb.base/global-var-nested-by-dso-solib1.c: New file.
2412 * gdb.base/global-var-nested-by-dso-solib2.c: Likewise.
2413 * gdb.base/global-var-nested-by-dso.c: Likewise.
2414 * gdb.base/global-var-nested-by-dso.exp: Likewise.
2416 2014-09-16 Sergio Durigan Junior <sergiodj@redhat.com>
2417 Pedro Alves <palves@redhat.com>
2419 * gdb.base/watch-bitfields.exp: Pass string other than test file
2420 name to prepare_for_testing.
2421 (watch): New procedure.
2422 (expect_watchpoint): Use with_test_prefix.
2423 (top level): Factor out tests to ...
2424 (test_watch_location, test_regular_watch): ... these new
2425 procedures, and use with_test_prefix and gdb_continue_to_end.
2427 2014-09-16 Patrick Palka <patrick@parcs.ath.cx>
2429 PR breakpoints/12526
2430 * gdb.base/watch-bitfields.exp: New file.
2431 * gdb.base/watch-bitfields.c: New file.
2433 2014-09-16 Pedro Alves <palves@redhat.com>
2435 * gdb.base/watchpoint-stops-at-right-insn.exp (test): Compare
2436 software and hardware addresses, not software address against
2439 2014-09-16 Pedro Alves <palves@redhat.com>
2441 * gdb.base/watchpoint-stops-at-right-insn.c: New file.
2442 * gdb.base/watchpoint-stops-at-right-insn.exp: New file.
2444 2014-09-16 Pedro Alves <palves@redhat.com>
2446 * config/vx.exp, config/vxworks.exp, config/vxworks29k.exp: Delete
2448 * gdb.base/a2-run.exp: Remove all code guarded by istarget
2449 "*-*-vxworks*" throughout.
2450 * gdb.base/break.exp: Likewise.
2451 * gdb.base/default.exp: Likewise.
2452 * gdb.base/scope.exp: Likewise.
2453 * gdb.base/sepdebug.exp: Likewise.
2454 * gdb.base/break.c: Remove all code guarded by #ifdef vxworks
2456 * gdb.base/run.c: Likewise.
2457 * gdb.base/sepdebug.c: Likewise.
2458 * gdb.hp/gdb.aCC/run.c: Likewise.
2459 * gdb.reverse/until-reverse.c: Likewise.
2460 * lib/gdb.exp (gdb_compile): Remove is_vxworks branch.
2462 2014-09-16 Yao Qi <yao@codesourcery.com>
2464 * boards/local-remote-host-native.exp: New file.
2466 2014-09-14 Doug Evans <xdje42@gmail.com>
2468 * gdb.threads/queue-signal.c (thread_count): New variable.
2469 (thread_count_mutex, thread_count_condvar): New variables.
2470 (incr_thread_count, wait_all_threads_running): New functions.
2471 (main): Wait for all threads to be in their thread functions.
2473 2014-09-13 Doug Evans <xdje42@gmail.com>
2475 * gdb.threads/queue-signal.c: New file.
2476 * gdb.threads/queue-signal.exp: New file.
2478 2014-09-13 Doug Evans <xdje42@gmail.com>
2480 * lib/gdb.exp (gdb_prompt): Add comment and change initial value to
2481 be consistent with what default_gdb_init uses.
2482 (with_gdb_prompt): Change form of PROMPT argument from a regexp to
2483 the plain text of the prompt. Add some logging printfs.
2484 * gdb.perf/disassemble.exp: Update call to with_gdb_prompt.
2486 2014-09-12 Pedro Alves <palves@redhat.com>
2488 * gdb.arch/gdb1558.exp: Replace uses of gdb_expect after
2489 gdb_run_cmd with gdb_test_multiple or gdb_test throughout.
2490 * gdb.arch/i386-size-overlap.exp: Likewise.
2491 * gdb.arch/i386-size.exp: Likewise.
2492 * gdb.arch/i386-unwind.exp: Likewise.
2493 * gdb.base/a2-run.exp: Likewise.
2494 * gdb.base/break.exp: Likewise.
2495 * gdb.base/charset.exp: Likewise.
2496 * gdb.base/chng-syms.exp: Likewise.
2497 * gdb.base/commands.exp: Likewise.
2498 * gdb.base/dbx.exp: Likewise.
2499 * gdb.base/find.exp: Likewise.
2500 * gdb.base/funcargs.exp: Likewise.
2501 * gdb.base/jit-simple.exp: Likewise.
2502 * gdb.base/reread.exp: Likewise.
2503 * gdb.base/sepdebug.exp: Likewise.
2504 * gdb.base/step-bt.exp: Likewise.
2505 * gdb.cp/mb-inline.exp: Likewise.
2506 * gdb.cp/mb-templates.exp: Likewise.
2507 * gdb.objc/basicclass.exp: Likewise.
2508 * gdb.threads/killed.exp: Likewise.
2510 2014-09-12 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
2513 * gdb.arch/powerpc-stackless.S: New file.
2514 * gdb.arch/powerpc-stackless.exp: New file.
2516 2014-09-12 Jan Kratochvil <jan.kratochvil@redhat.com>
2518 * gdb.base/attach.c: Include unistd.h.
2519 (main): Call alarm. Add label postloop.
2520 * gdb.base/attach.exp (do_attach_tests): Use gdb_get_line_number,
2521 gdb_breakpoint, gdb_continue_to_breakpoint.
2522 (test_command_line_attach_run): Kill ${testpid} in one exit path.
2524 2014-09-11 Pedro Alves <palves@redhat.com>
2527 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure.
2528 * gdb.base/attach.exp (test_command_line_attach_run): New
2530 (top level): Call it.
2532 2014-09-11 Pedro Alves <palves@redhat.com>
2534 * lib/gdb.exp (spawn_wait_for_attach): New procedure.
2535 * gdb.base/attach.exp (do_attach_tests, do_call_attach_tests)
2536 (do_command_attach_tests): Use spawn_wait_for_attach.
2537 * gdb.base/solib-overlap.exp: Likewise.
2538 * gdb.multi/multi-attach.exp: Likewise.
2539 * gdb.python/py-prompt.exp: Likewise.
2540 * gdb.python/py-sync-interp.exp: Likewise.
2541 * gdb.server/ext-attach.exp: Likewise.
2543 2014-09-11 Gabriel Krisman Bertazi <gabriel@krisman.be>
2545 * gdb.fortran/array-element.exp: Remove unexpected "continue"
2546 command in testcase. Simplify testcase.
2548 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2550 * gdb.dwarf2/dynarr-ptr.exp: Add a few ptype tests.
2552 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2554 * gdb.dwarf2/dynarr-ptr.exp: Add 'first, 'last and 'length tests.
2556 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2558 * gdb.dwarf2/dynarr-ptr.exp: Add subscripting tests.
2560 2014-09-10 Joel Brobecker <brobecker@adacore.com>
2562 * gdb.dwarf2/dynarr-ptr.c: New file.
2563 * gdb.dwarf2/dynarr-ptr.exp: New file.
2565 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2567 * gdb.base/watchpoint-solib.exp: Increase the timeout by a factor
2568 of 30 rather than hardcoding 120 for a slow test case. Take the
2569 `gdb,timeout' target setting into account for this calculation.
2570 Don't extend the timeout for the test cases that don't need it.
2572 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2574 * gdb.reverse/sigall-reverse.exp: Increase the timeout by
2575 a factor of 2 for a slow test case. Take the `gdb,timeout'
2576 target setting into account for this calculation.
2577 * gdb.reverse/until-precsave.exp: Increase the timeout by
2578 a factor of 15 and 3 respectively rather than adding 120
2579 for a pair of slow test cases. Take the `gdb,timeout'
2580 target setting into account for this calculation.
2582 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2584 * lib/gdb.exp (gdb_test_multiple): Remove code to select the
2585 timeout, don't pass one down to gdb_expect.
2586 (gdb_expect): Rework timeout selection.
2588 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2590 * lib/gdbserver-support.exp (gdbserver_start): Throw an error
2591 exception on timeout.
2592 (gdbserver_run): Catch any `gdbserver_spawn' error exceptions.
2593 (gdbserver_start_extended): Catch any `gdbserver_start' error
2595 (gdbserver_start_multi, mi_gdbserver_start_multi): Likewise.
2596 * lib/mi-support.exp (mi_gdb_target_load): Catch any
2597 `gdbserver_gdb_load' error exceptions.
2599 2014-09-09 Maciej W. Rozycki <macro@codesourcery.com>
2601 * lib/gdbserver-support.exp (gdbserver_start): Set timeout to
2602 120 on waiting for the TCP socket to open.
2604 2014-09-09 Doug Evans <xdje42@gmail.com>
2606 * gdb.base/default.exp (show_conv_list): Add _caller_is,
2607 _caller_matches, _any_caller_is, _any_caller_matches.
2609 2014-09-09 Doug Evans <xdje42@gmail.com>
2611 * gdb.guile/scm-error.exp: Handle guile 2.2 backtrace output.
2613 2014-09-09 Yao Qi <yao@codesourcery.com>
2615 * gdb.mi/mi-var-display.exp: Set print symbol off.
2617 2014-09-07 Gabriel Krisman Bertazi <gabriel@krisman.be>
2620 * gdb.base/commands.exp: Add tests to verify user-defined
2621 commands with empty bodies.
2622 * gdb.python/py-cmd.exp: Test that we don't show user-defined
2623 python commands in `show user command`.
2624 * gdb.python/scm-cmd.exp: Test that we don't show user-defined
2625 scheme commands in `show user command`.
2627 2014-09-07 Jan Kratochvil <jan.kratochvil@redhat.com>
2630 * gdb.python/amd64-py-framefilter-invalidarg.S: New file.
2631 * gdb.python/py-framefilter-invalidarg-gdb.py.in: New file.
2632 * gdb.python/py-framefilter-invalidarg.exp: New file.
2633 * gdb.python/py-framefilter-invalidarg.py: New file.
2635 2014-09-06 Doug Evans <xdje42@gmail.com>
2638 * gdb.python/py-caller-is.c: New file.
2639 * gdb.python/py-caller-is.exp: New file.
2641 2014-09-05 Sergio Durigan Junior <sergiodj@redhat.com>
2644 * gdb.arch/amd64-stap-wrong-subexp.exp: New file.
2645 * gdb.arch/amd64-stap-wrong-subexp.S: Likewise.
2647 2014-09-04 Sergio Durigan Junior <sergiodj@redhat.com>
2650 * gdb.fortran/print-formatted.exp: New file.
2651 * gdb.fortran/print-formatted.f90: Likewise.
2653 2014-09-03 Sasha Smundak <asmundak@google.com>
2655 * gdb.python/py-frame.exp: Test Frame.read_register.
2657 2014-09-03 Sergio Durigan Junior <sergiodj@redhat.com>
2660 * gdb.python/py-completion.exp: New file.
2661 * gdb.python/py-completion.py: Likewise.
2663 2014-08-28 Doug Evans <dje@google.com>
2665 * gdb.arch/amd64-pseudo.c (main): Rewrite to better specify when
2666 eax,etc. are live with values set by gdb and thus the compiler can't
2668 * gdb.arch/i386-pseudo.c (main): Ditto.
2670 2014-08-27 Doug Evans <dje@google.com>
2672 * lib/gdb.exp (gdb_compile_shlib): Add support for clang.
2674 2014-08-25 Doug Evans <dje@google.com>
2676 * gdb.mi/basics.c (callee3, callee2, callee1): Specify result type.
2679 2014-08-25 Doug Evans <dje@google.com>
2681 * gdb.threads/thread-execl.exp: #include <stdio.h>.
2683 2014-08-24 Yao Qi <yao@codesourcery.com>
2685 * gdb.guile/scm-value.exp (test_lazy_strings): Set print
2687 * gdb.python/py-value.exp (test_lazy_strings): Likewise.
2689 2014-08-22 Doug Evans <dje@google.com>
2692 * gdb.dwarf2/dw2-single-line-discriminators.S: New file.
2693 * gdb.dwarf2/dw2-single-line-discriminators.c: New file.
2694 * gdb.dwarf2/dw2-single-line-discriminators.exp: New file.
2696 2014-08-22 Yao Qi <yao@codesourcery.com>
2698 * gdb.python/py-finish-breakpoint.exp: Copy .py file to host.
2699 * gdb.python/py-finish-breakpoint2.exp: Likewise.
2700 * gdb.python/python.exp: Likewise. Use .py file on the host
2701 instead of the build.
2703 2014-08-21 Jan Kratochvil <jan.kratochvil@redhat.com>
2705 * gdb.threads/gcore-stale-thread.c: New file.
2706 * gdb.threads/gcore-stale-thread.exp: New file.
2708 2014-08-21 Pedro Alves <palves@redhat.com>
2710 * gdb.base/gcore-buffer-overflow.exp: Remove "help gcore" test.
2711 * gdb.base/gcore-relro-pie.exp: Likewise.
2712 * gdb.base/gcore-relro.exp: Likewise.
2713 * gdb.base/gcore.exp: Likewise.
2714 * gdb.base/print-symbol-loading.exp: Likewise.
2715 * gdb.threads/gcore-thread.exp: Likewise.
2716 * lib/gdb.exp (gdb_gcore_cmd): Don't expect "Undefined command".
2718 2014-08-20 Pedro Alves <palves@redhat.com>
2719 Jan Kratochvil <jan.kratochvil@redhat.com>
2721 * Makefile.in (EXTRA_RULES, CC): New variables, get from
2723 (EXPECT): Handle READ1 being set.
2724 (all): Depend on EXTRA_RULES.
2725 (check-read1, expect-read1, read1.so, read1): New rules.
2726 * README (Testsuite Parameters): Document the READ1 make variable.
2727 (Race detection): New section.
2728 * configure: Regenerate.
2729 * configure.ac: If build==host==target, and running under a
2730 GNU/glibc system, add read1 to the extra Makefile rules.
2731 (EXTRA_RULES): AC_SUBST it.
2732 * lib/read1.c: New file.
2734 2014-08-20 Joel Brobecker <brobecker@adacore.com>
2736 * gdb.dwarf2/data-loc.exp: Add additional tests exercising
2737 the handling of variables declared as a typedef to an array
2738 which a DW_AT_data_location attribute.
2740 2014-08-19 Andrew Burgess <aburgess@broadcom.com>
2741 Pedro Alves <palves@redhat.com>
2745 * gdb.dwarf2/dw2-op-out-param.exp: Remove kfail branches and use
2748 2014-08-19 Pedro Alves <palves@redhat.com>
2750 * gdb.base/watchpoint-hw-hit-once.c (main): Update comment.
2752 2014-08-19 Yao Qi <yao@codesourcery.com>
2754 * gdb.base/watchpoint-hw-hit-once.exp: Set breakpoint on the
2757 2014-08-18 David Blaikie <dblaikie@gmail.com>
2759 * boards/fission.exp: Explicitly pass -ggnu-pubnames for clang.
2761 2014-08-18 Joel Brobecker <brobecker@adacore.com>
2763 * gdb.dwarf2/data-loc.exp: Remove second DW_AT_upper bound
2764 attribute in array range.
2766 2014-08-18 Joel Brobecker <brobecker@adacore.com>
2768 * gdb.dwarf2/data-loc.c, gdb.dwarf2/data-loc.exp: New files.
2770 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
2773 * gdb.cp/pr17132.cc: New file.
2774 * gdb.cp/pr17132.exp: New file.
2776 2014-08-15 Siva Chandra Reddy <sivachandra@google.com>
2778 * gdb.python/py-xmethods.py (A_getarrayind)
2779 (E_method_char_worker.__call__, E_method_int_worker.__call__):
2780 Use 'print' with function call syntax.
2781 (E_method_matcher.match): Fix tab vs space indentation mixup.
2783 2014-08-15 Yao Qi <yao@codesourcery.com>
2785 * gdb.trace/tfile.exp: Return -1 if generate_tracefile returns
2788 2014-08-15 Yao Qi <yao@codesourcery.com>
2790 * gdb.cp/casts.exp: Set print symbol off.
2791 * gdb.cp/class2.exp: Likewise.
2792 * gdb.cp/overload.exp: Likewise.
2793 * gdb.cp/templates.exp: Likewise.
2795 2014-08-11 Doug Evans <dje@google.com>
2797 * gdb.base/print-symbol-loading.exp (test_load_core): Update.
2798 (test_load_shlib): Update.
2800 2014-08-09 Yao Qi <yao@codesourcery.com>
2802 * gdb.base/display.exp: Invoke is_address_zero_readable.
2803 * gdb.guile/scm-value.exp (test_value_in_inferior): Likewise.
2804 * gdb.python/py-value.exp (test_value_in_inferior): Likewise.
2805 * gdb.base/hbreak-unmapped.exp: Return if
2806 is_address_zero_readable returns true.
2807 * gdb.base/signest.exp: Likewise.
2808 * gdb.base/signull.exp: Likewise.
2809 * gdb.base/sigbpt.exp: Likewise.
2810 * gdb.guile/scm-disasm.exp: Do the test if
2811 is_address_zero_readable returns false.
2812 * gdb.guile/scm-pretty-print.exp (run_lang_tests): Likewise.
2813 * gdb.python/py-arch.exp: Likewise.
2814 * gdb.python/py-prettyprint.exp (run_lang_tests): Likewise.
2815 * lib/gdb.exp (is_address_zero_readable): New proc.
2817 2014-08-09 Yao Qi <yao@codesourcery.com>
2820 * gdb.mi/mi-var-display.exp: Make test messages unique.
2822 2014-08-04 Tom Tromey <tromey@redhat.com>
2824 * gdb.base/sss-bp-on-user-bp-2.exp: Expect output from "set debug
2827 2014-08-04 Tom Tromey <tromey@redhat.com>
2829 * gdb.base/sss-bp-on-user-bp-2.exp: Match "to_resume", not
2832 2014-08-01 Joel Brobecker <brobecker@adacore.com>
2834 * gdb.base/vla-datatypes.c (vla_factory): Add new variable
2835 inner_vla_struct_object_size.
2836 * gdb.base/vla-datatypes.exp: Adjust last test, and mark it
2839 2014-07-30 Pedro Alves <palves@redhat.com>
2841 * gdb.threads/signal-command-handle-nopass.exp (test): Add
2844 2014-07-29 Yao Qi <yao@codesourcery.com>
2847 * gdb.base/until-nodebug.exp: New.
2849 2014-07-28 Doug Evans <xdje42@gmail.com>
2852 * gdb.guile/scm-parameter.exp: Add tests for trying to create
2853 previously existing parameter, and previously ambiguously spelled
2856 2014-07-28 Will Newton <will.newton@linaro.org>
2858 * gdb.base/varargs.exp: Remove KFAILs for ARM.
2860 2014-07-26 Ludovic Courtès <ludo@gnu.org>
2861 Doug Evans <xdje42@gmail.com>
2864 * gdb.guile/types-module.exp: Add tests for wrong type arguments.
2866 2014-07-25 Pedro Alves <palves@redhat.com>
2868 * gdb.threads/signal-command-handle-nopass.c: New file.
2869 * gdb.threads/signal-command-handle-nopass.exp: New file.
2870 * gdb.threads/signal-command-multiple-signals-pending.c: New file.
2871 * gdb.threads/signal-command-multiple-signals-pending.exp: New file.
2872 * gdb.threads/signal-delivered-right-thread.c: New file.
2873 * gdb.threads/signal-delivered-right-thread.exp: New file.
2875 2014-07-25 Pedro Alves <palves@redhat.com>
2877 * gdb.base/double-prompt-target-event-error.exp
2878 (cancel_pagination_in_target_event): Remove '-notransfer <return>'
2880 (cancel_pagination_in_target_event): Rework double prompt
2882 * gdb.base/paginate-after-ctrl-c-running.exp
2883 (test_ctrlc_while_target_running_paginates): Remove '-notransfer
2885 * gdb.base/paginate-bg-execution.exp
2886 (test_bg_execution_pagination_return)
2887 (test_bg_execution_pagination_cancel): Remove '-notransfer
2889 * gdb.base/paginate-execution-startup.exp
2890 (test_fg_execution_pagination_return)
2891 (test_fg_execution_pagination_cancel): Remove '-notransfer
2893 * gdb.base/paginate-inferior-exit.exp
2894 (test_paginate_inferior_exited): Remove '-notransfer <return>'
2896 * lib/gdb-utils.exp (string_to_regexp): Move here from lib/gdb.exp.
2897 * lib/gdb.exp (pagination_prompt): Run text through
2899 (gdb_test_multiple): Match $pagination_prompt instead of
2901 (string_to_regexp): Move to lib/gdb-utils.exp.
2903 2014-07-22 Jan Kratochvil <jan.kratochvil@redhat.com>
2905 * gdb.arch/amd64-entry-value-paramref.S: New file.
2906 * gdb.arch/amd64-entry-value-paramref.cc: New file.
2907 * gdb.arch/amd64-entry-value-paramref.exp: New file.
2908 * gdb.arch/amd64-optimout-repeat.S: New file.
2909 * gdb.arch/amd64-optimout-repeat.c: New file.
2910 * gdb.arch/amd64-optimout-repeat.exp: New file.
2912 2014-07-17 Jan Kratochvil <jan.kratochvil@redhat.com>
2915 * gdb.base/statistics.exp: New file.
2917 2014-07-17 Doug Evans <dje@google.com>
2920 * gdb.base/maint.exp: Update testing of per-command stats.
2922 2014-07-16 Pedro Alves <palves@redhat.com>
2924 * gdb.trace/tfile.c: Include unistd.h and stdint.h.
2925 (start_trace_file): Guard S_IRGRP and S_IROTH uses behind #ifdef.
2926 (tfile_write_64, tfile_write_16, tfile_write_8, tfile_write_addr)
2927 (tfile_write_buf): New functions.
2928 (add_memory_block): Rewrite using the above.
2929 (adjust_function_address): New function.
2930 (FUNCTION_ADDRESS): New macro.
2931 (write_basic_trace_file): Remove short_x local, and use
2932 tfile_write_16. Change type of func_addr local to unsigned long
2933 long. Use FUNCTION_ADDRESS instead of handling the Thumb bit
2934 here. Cast argument of add_memory_block to char pointer.
2935 (write_error_trace_file): Avoid alloca. Use FUNCTION_ADDRESS.
2936 (main): Remove parameters.
2937 * gdb.trace/tfile.exp: Remove nowarnings.
2939 2014-07-15 Simon Marchi <simon.marchi@ericsson.com>
2941 * gdb.base/debug-expr.exp: Test string evaluation with
2942 "debug expression" on.
2944 2014-07-15 Pedro Alves <palves@redhat.com>
2946 * gdb.base/reread.exp: Use clean_restart.
2948 2014-07-15 Pierre Langlois <pierre.langlois@embecosm.com>
2950 * gdb.arch/avr-flash-qualifer.c: New.
2951 * gdb.arch/avr-flash-qualifer.exp: New.
2953 2014-07-14 Pedro Alves <palves@redhat.com>
2955 * gdb.base/paginate-after-ctrl-c-running.c: New file.
2956 * gdb.base/paginate-after-ctrl-c-running.exp: New file.
2958 2014-07-14 Pedro Alves <palves@redhat.com>
2960 * gdb.base/double-prompt-target-event-error.c: New file.
2961 * gdb.base/double-prompt-target-event-error.exp: New file.
2963 2014-07-14 Pedro Alves <palves@redhat.com>
2966 * gdb.base/paginate-inferior-exit.c: New file.
2967 * gdb.base/paginate-inferior-exit.exp: New file.
2969 2014-07-14 Pedro Alves <palves@redhat.com>
2972 * gdb.base/paginate-bg-execution.c: New file.
2973 * gdb.base/paginate-bg-execution.exp: New file.
2975 2014-07-14 Pedro Alves <palves@redhat.com>
2978 * gdb.base/paginate-execution-startup.c: New file.
2979 * gdb.base/paginate-execution-startup.exp: New file.
2980 * lib/gdb.exp (pagination_prompt): New global.
2981 (default_gdb_spawn): New procedure, factored out from
2983 (default_gdb_start): Adjust to call default_gdb_spawn.
2984 (gdb_spawn): New procedure.
2986 2014-07-14 Pedro Alves <palves@redhat.com>
2988 * lib/gdb.exp (gdb_assert): New procedure.
2989 * gdb.trace/backtrace.exp (gdb_backtrace_tdp_4): Use it.
2991 2014-07-14 Pedro Alves <palves@redhat.com>
2993 * gdb.base/execution-termios.c: New file.
2994 * gdb.base/execution-termios.exp: New file.
2996 2014-07-14 Tom Tromey <tromey@redhat.com>
2998 * gdb.cp/vla-cxx.cc: New file.
2999 * gdb.cp/vla-cxx.exp: New file.
3001 2014-07-14 Tom Tromey <tromey@redhat.com>
3003 * gdb.reverse/rerun-prec.c: New file.
3004 * gdb.reverse/rerun-prec.exp: New file.
3006 2014-07-12 Maciej W. Rozycki <macro@mips.com>
3007 Maciej W. Rozycki <macro@codesourcery.com>
3009 * lib/gdb-utils.exp: New file.
3010 * lib/gdb.exp (gdb_run_cmd): Call gdb_init_commands, replacing
3011 inline `gdb_init_command' processing.
3012 (gdb_start_cmd): Likewise.
3013 * lib/mi-support.exp (mi_run_cmd): Likewise.
3014 * README: Document `gdb_init_command' and `gdb_init_commands'.
3016 2014-07-11 Jan Kratochvil <jan.kratochvil@redhat.com>
3018 Fix false FAIL running under a very long directory name.
3019 * gdb.base/argv0-symlink.exp: Add "set print repeats 10000"
3020 and "set print elements 10000". Twice.
3022 2014-07-11 Yao Qi <yao@codesourcery.com>
3024 * gdb.base/exprs.exp: "set print symbol off".
3026 2014-07-11 Pedro Alves <palves@redhat.com>
3028 * gdb.threads/kill.c: New file.
3029 * gdb.threads/kill.exp: New file.
3031 2014-07-10 Yao Qi <yao@codesourcery.com>
3033 * gdb.trace/tfile.c (write_basic_trace_file)
3034 [__thumb__||__thumb2__]: Clear the Thumb bit of the function
3035 address written to trace file.
3037 2014-07-09 Pedro Alves <palves@redhat.com>
3039 * gdb.base/attach-wait-input.exp: New file.
3040 * gdb.base/attach-wait-input.c: New file.
3042 2014-07-09 Andrew Burgess <andrew.burgess@embecosm.com>
3044 * gdb.mi/var-cmd.c (do_nested_struct_union_tests): New function
3045 setting up test structures.
3046 (main): Call new test function.
3047 * gdb.mi/mi2-var-child.exp: Create additional breakpoint in new
3048 test function, continue into test function and walk test
3051 2014-07-02 Yao Qi <yao@codesourcery.com>
3053 * gdb.trace/entry-values.c: Define labels 'foo_start' and
3054 'bar_start' at the beginning of functions 'foo' and 'bar'
3056 * gdb.trace/entry-values.exp: Use 'foo_start' and 'bar_start'
3057 instead of 'foo' and 'bar'.
3059 2014-07-08 Markus Metzger <markus.t.metzger@intel.com>
3061 * gdb.btrace/segv.exp: New.
3062 * gdb.btrace/segv.c: New.
3064 2014-07-02 Luis Machado <lgustavo@codesourcery.com>
3066 * gdb.trace/entry-values.exp: Handle powerpc-specific branch
3069 2014-06-30 Mark Wielaard <mjw@redhat.com>
3071 * gdb.base/constvars.c (violent, violet, vips, virgen, vulgar,
3072 vulture, vilify, villar): New volatile array constants.
3073 (vindictive, vegetation): New const volatile array constants.
3074 * gdb.base/volatile.exp: Test volatile and const volatile array
3077 2014-06-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
3079 * gdb.base/watchpoint-reuse-slot.exp: Handle the case that the
3080 target lacks support for awatch, rwatch, or hbreak.
3082 2014-06-27 Yao Qi <yao@codesourcery.com>
3084 * gdb.multi/dummy-frame-restore.exp: New.
3085 * gdb.multi/dummy-frame-restore.c: New.
3087 2014-06-25 Markus Metzger <markus.t.metzger@intel.com>
3089 * gdb.btrace/gcore.exp: New.
3091 2014-06-23 Pedro Alves <palves@redhat.com>
3093 * gdb.base/watchpoint-reuse-slot.c: New file.
3094 * gdb.base/watchpoint-reuse-slot.exp: New file.
3096 2014-06-23 Siva Chandra Reddy <sivachandra@google.com>
3098 * gdb.python/py-xmethods.exp: Use "progspace" instead of the
3099 progspace's filename in 'info', 'enable' and 'disable' command
3102 2014-06-23 Jan Kratochvil <jan.kratochvil@redhat.com>
3104 * gdb.arch/amd64-stap-special-operands.exp: Use is_lp64_target.
3105 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
3106 * gdb.dwarf2/dw2-error.exp: Use istarget and is_lp64_target.
3108 2014-06-20 Gary Benson <gbenson@redhat.com>
3110 * gdb.arch/i386-avx.exp: Fix include file location.
3111 * gdb.arch/i386-sse.exp: Likewise.
3113 2014-06-19 Iain Buclaw <ibuclaw@gdcproject.org>
3115 * gdb.dlang/expression.exp: New file.
3117 2014-06-19 Pedro Alves <palves@redhat.com>
3119 * gdb.threads/thread-execl.exp (do_test): New procedure, factored
3121 (top level): ... here. Iterate running tests under different
3122 scheduler-locking settings.
3124 2014-06-18 Luis Machado <lgustavo@codesourcery.com>
3126 * gdb.cp/nsalias.exp: Set type of low_pc and high_pc entries
3127 to DW_FORM_addr and use non-zero addresses.
3129 2014-06-18 Siva Chandra Reddy <sivachandra@google.com>
3132 * gdb.python/py-xmethods.cc: Add global function call counters and
3133 increment them in their respective functions. Remove "cout"
3135 * gdb.python/py-xmethods.exp: Make tests check the global function
3136 call counters instead of depending on inferior IO.
3138 2014-06-18 Don Breazeal <donb@codesourcery.com>
3140 * gdb.base/foll-fork.exp (default_fork_parent_follow):
3142 (explicit_fork_parent_follow): Deleted procedure.
3143 (explicit_fork_child_follow): Deleted procedure.
3144 (test_follow_fork): New procedure.
3145 (do_fork_tests): Replace calls to deleted procedures with
3146 calls to test_follow_fork and reset GDB for subsequent
3149 2014-06-17 Yao Qi <yao@codesourcery.com>
3151 * gdb.base/wchar.exp: Set $cent to \u00A2 if "host-charset" is
3154 2014-06-17 Luis Machado <lgustavo@codesourcery.com>
3156 * gdb.mi/mi-var-rtti.cc (type_update_when_use_rtti_test):
3157 Initialize ptr and S explicitly.
3158 (skip_type_update_when_not_use_rtti_test): Likewise.
3160 2014-06-16 Keith Seitz <keiths@redhat.com>
3163 * gdb.mi/mi-var-cmd.exp: Add test for -var-update before
3164 the inferior is started.
3166 2014-06-16 Pedro Alves <palves@redhat.com>
3168 * gdb.base/break-main-file-remove-fail.c: New file.
3169 * gdb.base/break-main-file-remove-fail.exp: New file.
3170 * gdb.base/break-unload-file.exp: Use build_executable instead of
3171 prepare_for_testing.
3172 (test_break): New parameter "initial_load". Handle it.
3173 (top level): Add initial_load cmdline/file axis.
3175 2014-06-12 Tom Tromey <tromey@redhat.com>
3177 * gdb.base/completion.exp: Don't use directory name in test.
3179 2014-06-09 Gary Benson <gbenson@redhat.com>
3181 * gdb.base/sigall.c [Functions to send signals]: Reorder to
3182 separate the always-available ANSI-standard signals from the
3183 signals that require checking.
3185 * gdb.reverse/sigall-reverse.c [Functions to send signals]:
3189 2014-06-07 Keith Seitz <keiths@redhat.com>
3193 * gdb.cp/var-tag.cc: New file.
3194 * gdb.cp/var-tag.exp: New file.
3195 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
3196 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
3197 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
3198 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
3200 2014-06-06 Doug Evans <xdje42@gmail.com>
3202 * gdb.guile/scm-frame-args.c (foo): Tweak to work with gcc 4.6.3.
3204 2014-06-06 Pedro Alves <palves@redhat.com>
3206 * gdb.base/sss-bp-on-user-bp-2.exp: Look for target_resume(step)
3207 in target debug output instead of looking at RSP packets,
3208 disabling the test on any target that uses hardware stepping.
3211 2014-06-06 Pedro Alves <palves@redhat.com>
3213 * gdb.base/break-unload-file.exp: Fix typo.
3215 2014-06-06 Yao Qi <yao@codesourcery.com>
3217 * gdb.base/jit.exp (one_jit_test): Restrict the pattern
3218 from "jit_function" to "^jit_function".
3220 2014-06-06 Yao Qi <yao@codesourcery.com>
3222 * gdb.base/async.c (foo): Add one statement.
3223 * gdb.base/async.exp: Get the next instruction address and
3224 match the output of "nexti" by instruction address. Match
3225 the hex address in the output of "finish".
3227 2014-06-06 Gary Benson <gbenson@redhat.com>
3229 * gdb.base/call-signals.c: Remove preprocessor conditionals
3230 for always-defined signals SIGINT, SIGILL, SIGABRT, SIGFPE,
3231 SIGSEGV and SIGTERM.
3232 * gdb.base/sigall.c: Likewise.
3233 * gdb.base/unwindonsignal.c: Likewise.
3234 * gdb.reverse/sigall-reverse.c: Likewise.
3236 2014-06-06 Yao Qi <yao@codesourcery.com>
3238 * gdb.base/hbreak-unmapped.exp: Read memory at address 0. If
3239 readable, skip the test.
3241 2014-06-06 Yao Qi <yao@codesourcery.com>
3243 * gdb.threads/staticthreads.c (thread_function): Move the line
3244 setting breakpoint on forward.
3245 * gdb.threads/staticthreads.exp: Update comments.
3247 2014-06-05 Ludovic Courtès <ludo@gnu.org>
3249 * gdb.guile/scm-value.exp (test_value_in_inferior): Add test
3250 "history-append! type error".
3252 2014-06-05 Simon Marchi <simon.marchi@ericsson.com>
3254 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Fix
3255 erroneous dprintf expected input.
3257 2014-06-04 Doug Evans <xdje42@gmail.com>
3259 * gdb.guile/scm-generics.exp: Delete.
3261 2014-06-04 Doug Evans <xdje42@gmail.com>
3263 * gdb.guile/scm-breakpoint.exp: Update.
3264 Add tests for breakpoint registration.
3266 2014-06-04 Tom Tromey <tromey@redhat.com>
3268 * gdb.base/vla-datatypes.exp: Add tests for VLA-in-structure and
3270 * gdb.base/vla-datatypes.c (vla_factory): Add vla_struct,
3271 inner_vla_struct, vla_union types. Initialize objects of those
3272 types and compute their sizes.
3274 2014-06-04 Nathan Sidwell <nathan@codesourcery.com>
3275 Hui Zhu <hui@codesourcery.com>
3277 * gdb.base/fileio.exp: Add test for shell not available as well as
3279 * gdb.base/fileio.c (test_system): Check for shell twice.
3281 2014-06-04 Yao Qi <yao@codesourcery.com>
3283 * gdb.base/auto-connect-native-target.exp: Remove redundant
3284 space from the regexp pattern.
3286 2014-06-04 Yao Qi <yao@codesourcery.com>
3288 * gdb.base/default.exp: Replace "child" with "native" in
3291 2014-06-03 Siva Chandra Reddy <sivachandra@google.com>
3293 * gdb.python/py-xmethods.cc: New testcase to test xmethods.
3294 * gdb.python/py-xmethods.exp: New tests to test xmethods.
3295 * gdb.python/py-xmethods.py: Python script supporting the
3296 new testcase and tests.
3298 2014-06-03 Joel Brobecker <brobecker@adacore.com>
3299 Pedro Alves <palves@redhat.com>
3301 PR breakpoints/17000
3302 * gdb.base/sss-bp-on-user-bp.exp: Remove kfail.
3303 * gdb.base/sss-bp-on-user-bp-2.exp: Remove kfail.
3305 2014-06-03 Brad Mouring <bmouring@ni.com> (tiny patch)
3307 * gdb.base/subst.exp: Add tests to verify partial path matching
3310 2014-06-03 Pedro Alves <palves@redhat.com>
3312 * gdb.base/sss-bp-on-user-bp-2.exp: Skip if testing with a remote
3313 target that doesn't use software single-stepping.
3315 2014-06-03 Pedro Alves <palves@redhat.com>
3317 PR breakpoints/17000
3318 * gdb.base/sss-bp-on-user-bp-2.c: New file.
3319 * gdb.base/sss-bp-on-user-bp-2.exp: New file.
3321 2014-06-02 Doug Evans <xdje42@gmail.com>
3323 * gdb.guile/scm-parameter.exp: New file.
3325 2014-06-02 Doug Evans <xdje42@gmail.com>
3327 * gdb.guile/scm-cmd.c: New file.
3328 * gdb.guile/scm-cmd.exp: New file.
3330 2014-06-02 Doug Evans <xdje42@gmail.com>
3332 * gdb.guile/scm-pretty-print.exp: Add tests for objfile and progspace
3333 pretty-printer lookup.
3334 * gdb.guile/scm-pretty-print.scm (pp_s-printer): New function.
3335 (make-pp_s-printer): Call it.
3336 (make-pretty-printer-from-dict): New function.
3337 (lookup-pretty-printer-maker-from-dict): New function.
3338 (*pretty-printer*): Simplify.
3339 (make-objfile-pp_s-printer): New function.
3340 (install-objfile-pretty-printers!): New function.
3341 (make-progspace-pp_s-printer): New function.
3342 (install-progspace-pretty-printers!): New function.
3343 * gdb.guile/scm-progspace.c: New file.
3344 * gdb.guile/scm-progspace.exp: New file.
3346 2014-06-02 Pedro Alves <palves@redhat.com>
3348 * gdb.base/dprintf-bp-same-addr.c: New file.
3349 * gdb.base/dprintf-bp-same-addr.exp: New file.
3351 2014-06-02 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
3353 * gdb.arch/powerpc-power.exp: Add power8 instructions to the testcase.
3354 * gdb.arch/powerpc-power.s: Likewise.
3356 2014-06-02 Joel Brobecker <brobecker@adacore.com>
3358 * gdb.base/completion.exp: Remove code aimed at restoring TIMEOUT.
3360 2014-06-01 Yao Qi <yao@codesourcery.com>
3362 * gdb.base/watchpoint.exp (test_watch_location): Check null
3363 pointer can be dereferenced. If not, do the test, otherwise
3366 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
3368 * gdb.arch/amd64-invalid-stack-middle.exp: Update expected
3370 * gdb.arch/amd64-invalid-stack-top.exp: Likewise.
3372 2014-05-30 Andrew Burgess <aburgess@broadcom.com>
3374 * gdb.arch/amd64-invalid-stack-middle.S: New file.
3375 * gdb.arch/amd64-invalid-stack-middle.c: New file.
3376 * gdb.arch/amd64-invalid-stack-middle.exp: New file.
3377 * gdb.arch/amd64-invalid-stack-top.c: New file.
3378 * gdb.arch/amd64-invalid-stack-top.exp: New file.
3380 2014-05-30 Pedro Alves <palves@redhat.com>
3382 PR breakpoints/17000
3383 * gdb.base/sss-bp-on-user-bp.c: New file.
3384 * gdb.base/sss-bp-on-user-bp.exp: New file.
3386 2014-05-30 David Blaikie <dblaikie@gmail.com>
3388 * gdb.opt/inline-break.c: Fix clang compatibility by specifying
3389 gnu_inline semantics via attribute.
3390 * gdb.opt/inline-break.exp: Remove -std=c89 now that the test
3391 source explicitly specifies the required semantics.
3393 2014-05-30 Maciej W. Rozycki <macro@codesourcery.com>
3395 * gdb.reverse/sigall-reverse.exp: Fix a typo.
3397 2014-05-29 Pedro Alves <palves@redhat.com>
3398 Tom Tromey <tromey@redhat.com>
3400 * gdb.base/async-shell.exp: Don't enable target-async.
3401 * gdb.base/async.exp
3402 * gdb.base/corefile.exp (corefile_test_attach): Remove 'async'
3404 (top level): Don't test with "target-async".
3405 * gdb.base/dprintf-non-stop.exp: Don't enable target-async.
3406 * gdb.base/gdb-sigterm.exp: Don't test with "target-async".
3407 * gdb.base/inferior-died.exp: Don't enable target-async.
3408 * gdb.base/interrupt-noterm.exp: Likewise.
3409 * gdb.mi/mi-async.exp: Use "mi-async" instead of "target-async".
3410 * gdb.mi/mi-nonstop-exit.exp: Likewise.
3411 * gdb.mi/mi-nonstop.exp: Likewise.
3412 * gdb.mi/mi-ns-stale-regcache.exp: Likewise.
3413 * gdb.mi/mi-nsintrall.exp: Likewise.
3414 * gdb.mi/mi-nsmoribund.exp: Likewise.
3415 * gdb.mi/mi-nsthrexec.exp: Likewise.
3416 * gdb.mi/mi-watch-nonstop.exp: Likewise.
3417 * gdb.multi/watchpoint-multi.exp: Adjust comment.
3418 * gdb.python/py-evsignal.exp: Don't enable target-async.
3419 * gdb.python/py-evthreads.exp: Likewise.
3420 * gdb.python/py-prompt.exp: Likewise.
3421 * gdb.reverse/break-precsave.exp: Don't test with "target-async".
3422 * gdb.server/solib-list.exp: Don't enable target-async.
3423 * gdb.threads/thread-specific-bp.exp: Likewise.
3424 * lib/mi-support.exp: Adjust to use mi-async.
3426 2014-05-29 Pedro Alves <palves@redhat.com>
3429 * gdb.mi/mi-cli.exp: Always expect "end-stepping-range" stop
3430 reason, even in sync mode.
3432 2014-05-29 Pedro Alves <palves@redhat.com>
3433 Hui Zhu <hui@codesourcery.com>
3436 * gdb.mi/mi-condbreak-call-thr-state-mt.c: New file.
3437 * gdb.mi/mi-condbreak-call-thr-state-st.c: New file.
3438 * gdb.mi/mi-condbreak-call-thr-state.c: New file.
3439 * gdb.mi/mi-condbreak-call-thr-state.exp: New file.
3441 2014-05-28 Joel Brobecker <brobecker@adacore.com>
3443 * config/monitor.exp (gdb_target_monitor): Replace use of
3444 "set remotebaud" by "set serial baud".
3446 2014-05-26 Andy Wingo <wingo@igalia.com>
3448 * gdb.guile/scm-breakpoint.exp:
3449 * gdb.guile/scm-gsmob.exp: Update to use plain old object
3450 properties instead of gdb-object-properties.
3452 2014-05-26 Yao Qi <yao@codesourcery.com>
3454 * gdb.server/no-thread-db.exp: Specify source file name
3455 explicitly when setting a breakpoint.
3457 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3459 * gdb.btrace/vdso.c: New.
3460 * gdb.btrace/vdso.exp: New.
3462 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3464 * gdb.base/gcore.exp (capture_command_output): Move ...
3465 * lib/gdb.exp (capture_command_output): ... here.
3467 2014-05-23 Markus Metzger <markus.t.metzger@intel.com>
3469 * gdb.btrace/data.exp: Test memory access during btrace replay.
3471 2014-05-22 Simon Marchi <simon.marchi@ericsson.com>
3473 * lib/mi-support.exp (mi_run_cmd_full): Add comments.
3475 2014-05-21 Pedro Alves <palves@redhat.com>
3478 * gdb.mi/mi-cli.exp (line_callee4_next_step): New global.
3479 (top level): Test that output related to execution commands is
3480 sent to the console with CLI commands, but not with MI commands.
3481 Test that breakpoint events are always mirrored to the console.
3482 Also expect the new source line to be output after a "next" in
3483 async mode too. Make it a pass/fail test.
3484 * gdb.mi/mi-solib.exp: Test that the CLI solib event note is
3486 * lib/mi-support.exp (mi_gdb_expect_cli_output): New procedure.
3488 2014-05-21 Pedro Alves <palves@redhat.com>
3490 * gdb.base/list.exp (build_pattern, test_list): New procedures.
3491 Use them to test variations of "list" after reaching a breakpoint.
3492 * gdb.mi/mi-cli.exp (line_main_callme_2): New global.
3493 Test "list" with listsize 10 after reaching a breakpoint.
3494 * gdb.python/python.exp (decode_line current location line
3495 number): Adjust expected line number.
3497 2014-05-21 Simon Marchi <simon.marchi@ericsson.com>
3499 * lib/mi-support.exp (mi_run_cmd_full): Revert to original
3500 behavior for $args, pass it directly to "run".
3502 2014-05-21 Maciej W. Rozycki <macro@codesourcery.com>
3504 * lib/gdb.exp (default_gdb_init): Bump `match_max' up from
3507 2014-05-21 Pedro Alves <palves@redhat.com>
3509 * boards/gdbserver-base.exp (GDBFLAGS): Set to "set
3510 auto-connect-native-target off".
3511 * gdb.base/auto-connect-native-target.c: New file.
3512 * gdb.base/auto-connect-native-target.exp: New file.
3514 2014-05-21 Pedro Alves <palves@redhat.com>
3516 * gdb.base/default.exp: Test "target native" instead of "target
3519 2014-05-21 Mark Wielaard <mjw@redhat.com>
3521 * gdb.cp/var-tag.exp (do_global_tests): Handle underlying type.
3523 2014-05-21 Jan Kratochvil <jan.kratochvil@redhat.com>
3525 Fix TLS access for -static -pthread.
3526 * gdb.threads/staticthreads.c <HAVE_TLS> (tlsvar): New.
3527 <HAVE_TLS> (thread_function, main): Initialize it.
3528 * gdb.threads/staticthreads.exp: Try gdb_compile_pthreads for $have_tls.
3530 <$have_tls != "">: Check TLSVAR.
3532 2014-05-21 Pedro Alves <palves@redhat.com>
3534 * gdb.base/dcache-line-read-error.c: New.
3535 * gdb.base/dcache-line-read-error.exp: New.
3537 2014-05-20 Pedro Alves <palves@redhat.com>
3539 * gdb.base/compare-sections.c: New file.
3540 * gdb.base/compare-sections.exp: New file.
3542 2014-05-20 Pedro Alves <palves@redhat.com>
3544 * gdb.base/break-idempotent.c: New file.
3545 * gdb.base/break-idempotent.exp: New file.
3547 2014-05-20 Markus Metzger <markus.t.metzger@intel.com>
3549 * gdb.btrace/nohist.exp: New.
3551 2014-05-20 Yao Qi <yao@codesourcery.com>
3553 * lib/gdb.exp (gdb_init): Set timeout if test file is under
3554 gdb.reverse directory and gdb_reverse_timeout exists in board
3556 * README: Document gdb_reverse_timeout.
3558 2014-05-20 Yao Qi <yao@codesourcery.com>
3560 * lib/gdb.exp (default_gdb_init): Rename argument 'args' by
3561 'test_file_name'. Treat args as a string instead of a list.
3562 (gdb_init): Rename argument 'args' by 'test_file_name'.
3564 2014-05-19 Jan Kratochvil <jan.kratochvil@redhat.com>
3566 * gdb.arch/powerpc-power.exp: New file.
3567 * gdb.arch/powerpc-power.s: New file.
3569 2014-05-16 Doug Evans <dje@google.com>
3571 * gdb.base/Makefile.in (EXECUTABLES): Add completion.
3572 * gdb.base/completion.exp: Check that all expected files exist
3573 before doing file completion.
3575 2014-05-16 Doug Evans <dje@google.com>
3577 * gdb.base/catch-syscall.exp (test_catch_syscall_fail_nodatadir):
3579 (do_syscall_tests_without_xml): Update.
3581 2014-05-16 Pedro Alves <palves@redhat.com>
3583 * lib/mi-support.exp (mi_expect_stop): On timeout, say "timeout"
3584 instead of "unknown output after running".
3586 2014-05-16 Yao Qi <yao@codesourcery.com>
3588 * gdb.dwarf2/dw2-filename.exp: Copy file1.txt to host. Remove
3589 file1.txt from host at the end.
3590 * gdb.dwarf2/dw2-anonymous-func.exp: Likewise.
3592 2014-05-15 Doug Evans <dje@google.com>
3594 * gdb.dwarf2/fission-reread.S: Remove directory from .dwo file path.
3595 * gdb.dwarf2/fission-reread.exp: Set debug-file-directory before
3596 loading file. Add test for TU lookup.
3598 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
3600 * lib/mi-support.exp (mi_run_cmd_full): Set arguments by
3601 calling "-exec-arguments" or "set args" before running the
3604 2014-05-15 Simon Marchi <simon.marchi@ericsson.com>
3606 * lib/mi-support.exp (mi_expect_stop): Expect message for
3607 inferiors that exit with non-zero exit code.
3609 2014-05-14 Yao Qi <yao@codesourcery.com>
3611 * gdb.mi/mi-file.exp (test_file_list_exec_source_file): Don't
3612 match absolute path on remote host.
3613 (test_file_list_exec_source_files): Remove "/" from the
3616 2014-05-14 Yao Qi <yao@codesourcery.com>
3618 * boards/local-remote-host-notty.exp (${board}_file): New
3621 2014-05-07 Kyle McMartin <kyle@redhat.com>
3623 Pushed by Joel Brobecker <brobecker@adacore.com>.
3624 * gdb.arch/aarch64-atomic-inst.c: New file.
3625 * gdb.arch/aarch64-atomic-inst.exp: New file.
3627 2014-05-07 Yao Qi <yao@codesourcery.com>
3629 * gdb.dwarf2/dwzbuildid.exp: Match output "No symbol "the_int"
3630 in current context" too.
3632 2014-05-05 Keith Seitz <keiths@redhat.com>
3634 * gdb.linespec/ls-dollar.exp: Add test for linespec
3635 file:convenience_variable.
3637 2014-05-05 Yao Qi <yao@codesourcery.com>
3639 * gdb.trace/unavailable.exp (gdb_collect_args_test): Save
3640 traceframes into tfile and ctf trace files. Read data from
3641 trace file and test collected data.
3642 (gdb_collect_locals_test): Likewise.
3643 (gdb_unavailable_registers_test): Likewise.
3644 (gdb_unavailable_floats): Likewise.
3645 (gdb_collect_globals_test): Likewise.
3646 (top-level): Append "ctf" to trace_file_targets if GDB
3649 2014-05-05 Yao Qi <yao@codesourcery.com>
3651 * gdb.trace/unavailable.exp (gdb_collect_args_test): Move some
3653 (gdb_collect_args_test_1): ... it. New proc.
3654 (gdb_collect_locals_test): Move some code to ...
3655 (gdb_collect_locals_test_1): ... it. New proc.
3656 (gdb_unavailable_registers_test): Move some code to ...
3657 (gdb_unavailable_registers_test_1): ... it. New proc.
3658 (gdb_unavailable_floats): Move some code to ...
3659 (gdb_unavailable_floats_1): ... it. New proc.
3661 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
3663 * gdb.arch/amd64-stap-optional-prefix.S (main): Add several
3664 probes to test for bitness recognition.
3665 * gdb.arch/amd64-stap-optional-prefix.exp
3666 (test_probe_value_without_reg): New procedure.
3667 Add code to test for different kinds of bitness.
3669 2014-05-02 Sergio Durigan Junior <sergiodj@redhat.com>
3671 PR breakpoints/16889
3672 * gdb.arch/amd64-stap-optional-prefix.S: New file.
3673 * gdb.arch/amd64-stap-optional-prefix.exp: Likewise.
3675 2014-05-01 Pedro Alves <palves@redhat.com>
3677 * lib/gdb.exp (gdb_load): Extend comment. Skip calling
3678 gdb_file_cmd if no file is specified.
3679 * boards/native-extended-gdbserver.exp (gdb_load): Use the
3680 last_loaded_file to set the remote exec-file.
3682 2014-05-01 Pedro Alves <palves@redhat.com>
3684 * boards/local-remote-host.exp: New file.
3686 2014-05-01 Pedro Alves <palves@redhat.com>
3688 * boards/local-remote-host.exp: Rename to ...
3689 * boards/local-remote-host-notty.exp: ... this.
3691 2014-04-28 Joel Brobecker <brobecker@adacore.com>
3693 * gdb.ada/dyn_arrayidx: New testcase.
3695 2014-04-26 Yao Qi <yao@codesourcery.com>
3697 * gdb.dwarf2/dwz.exp: Compile main.c to object. Restart GDB
3698 and compute the length of function main. Save it in
3700 (Dwarf::assemble): Use $main_length instead of hard-coded 10.
3701 (top-level): Use gdb_compile to compile objects into
3702 executable and restart GDB. Remove invocation to
3703 prepare_for_testing.
3705 2014-04-25 Simon Marchi <simon.marchi@ericsson.com>
3706 Pedro Alves <palves@redhat.com>
3709 * gdb.multi/multi-attach.c: New file.
3710 * gdb.multi/multi-attach.exp: New file.
3712 2014-04-25 Pedro Alves <palves@redhat.com>
3714 * gdb.base/cond-eval-mode.exp (warning): Move trailing \r\n to
3716 (top level): Test that "set remote conditional-breakpoints-packet
3717 off" works as intended.
3718 * gdb.base/dprintf.exp: Test that "set remote
3719 breakpoint-commands-packet off" works as intended.
3720 * gdb.trace/change-loc.exp (tracepoint_install_in_trace_disabled):
3722 (top level): Call it.
3723 * gdb.trace/ftrace.exp (test_fast_tracepoints): Test that "set
3724 remote fast-tracepoints-packet off" works as intended.
3725 * gdb.trace/qtro.exp (gdb_is_target_remote): Moved ...
3726 * lib/gdb.exp (gdb_is_target_remote): ... here.
3728 2014-04-24 David Blaikie <dblaikie@gmail.com>
3730 * gdb.base/catch-syscall.c: Make unreferenced statics non-static to
3731 ensure clang would not discard them.
3732 * gdb.base/gdbvars.c: Ditto.
3733 * gdb.base/memattr.c: Ditto.
3734 * gdb.base/whatis.c: Ditto.
3735 * gdb.python/py-prettyprint.c: Ditto.
3736 * gdb.trace/actions.c: Ditto.
3737 * gdb.cp/ptype-cv-cp.cc: Mark unused global const int as used to
3738 ensure clang would not discard it.
3740 2014-04-24 David Blaikie <dblaikie@gmail.com>
3742 * gdb.stabs/gdb11479.c (tag_dummy_enum): introduce a variable to cause
3743 clang to emit the full definition of type required by the test
3744 * gdb.stabs/gdb11479.exp (do_test): correct a typo in a test message
3746 2014-04-24 David Blaikie <dblaikie@gmail.com>
3748 * gdb.cp/pr10728-x.cc (main::x): Return by value instead of pointer to
3749 coax Clang into emitting the definition of the type.
3750 * gdb.cp/pr10728-x.h (y): Ditto.
3751 * gdb.cp/pr10728-y.cc (y): Ditto.
3753 2014-04-24 David Blaikie <dblaikie@gmail.com>
3755 * gdb.base/label.exp: XFAIL label related tests under Clang.
3756 * gdb.cp/cplabel.exp: Ditto.
3757 * gdb.linespec/ls-errs.exp: Refactor tests to execute directly and XFAIL
3758 under Clang those using labels.
3760 2014-04-25 Yao Qi <yao@codesourcery.com>
3762 * gdb.dwarf2/dwz.exp (Dwarf::assemble): Remove unused
3764 * gdb.dwarf2/dwzbuildid.exp (Dwarf::assemble): Remove
3765 partial_label and double_label.
3767 2014-04-24 David Blaikie <dblaikie@gmail.com>
3769 * gdb.python/lib-types.exp: Fix test and xfail under gcc due to gcc/55641.
3771 2014-04-24 David Blaikie <dblaikie@gmail.com>
3773 * gdb.cp/cpexprs.cc: Move braces to the same line as the start
3774 of the function to work across GCC and Clang.
3775 * gdb.cp/cpexprs.exp: Account for GCC/Clang difference in vtable
3776 pointer types (const void ** const V void **).
3778 2014-04-24 Michael Sturm <michael.sturm@mintel.com>
3779 Walfred Tedeschi <walfred.tedeschi@intel.com>
3781 * Makefile.in (EXECUTABLES): Added i386-avx512.
3782 * gdb.arch/i386-avx512.c: New file.
3783 * gdb.arch/i386-avx512.exp: Likewise.
3785 2014-04-23 Keith Seitz <keiths@redhat.com>
3787 * lib/mi-support.exp (mi_list_breakpoints): Delete.
3788 (mi_make_breakpoint_table): New procedure.
3789 (mi_create_breakpoint): Use mi_make_breakpoint
3790 and return the result.
3791 (mi_make_breakpoint): New procedure.
3792 (mi_build_kv_pairs): New procedure.
3794 * gdb.mi/mi-break.exp: Remove unused globals,
3795 update mi_create_breakpoint usage, and use mi_make_breakpoint_table.
3796 All callers updated.
3797 * gdb.mi/mi-dprintf.exp: Use variable to track command
3799 Update all callers of mi_create_breakpoint and use
3800 mi_make_breakpoint_table.
3801 Remove any unused global variables.
3802 * gdb.mi/mi-nonstop.exp: Likewise.
3803 * gdb.mi/mi-nsintrall.exp: Likewise.
3804 * gdb.mi/mi-nsmoribund.exp: Likewise.
3805 * gdb.mi/mi-nsthrexec.exp: Likewise.
3806 * gdb.mi/mi-reverse.exp: Likewise.
3807 * gdb.mi/mi-simplerun.exp: Likewise.
3808 * gdb.mi/mi-stepn.exp: Likewise.
3809 * gdb.mi/mi-syn-frame.exp: Likewise.
3810 * gdb.mi/mi-until.exp: Likewise.
3811 * gdb.mi/mi-var-cp.exp: Likewise.
3812 * gdb.mi/mi-var-display.exp: Likewise.
3813 * gdb.mi/mi2-amd64-entry-value.exp: Likewise.
3814 * gdb.mi/mi2-var-child.exp: Likewise.
3815 * gdb.mi/mi-vla-c99.exp: Likewise.
3816 * lib/mi-support.exp: Likewise.
3818 From Ian Lance Taylor <iant@cygnus.com>:
3819 * lib/gdb.exp (parse_args): New procedure.
3821 2014-04-23 Pedro Alves <palves@redhat.com>
3823 * gdb.base/break-unload-file.c: New file.
3824 * gdb.base/break-unload-file.exp: New file.
3825 * gdb.base/sym-file-lib.c (baz): New function.
3826 * gdb.base/sym-file-loader.c (struct segment) <mapped_size>: New
3828 (load): Store the segment's mapped size.
3829 (unload): New function.
3830 (unload_shlib): New function.
3831 * gdb.base/sym-file-loader.h (unload_shlib): New declaration.
3832 * gdb.base/sym-file-main.c (main): Unload, and reload the library,
3833 set a breakpoint at baz, and call it.
3834 * gdb.base/sym-file.exp: New tests for stale breakpoint
3837 2014-04-23 Pedro Alves <palves@redhat.com>
3839 * gdb.base/hbreak-in-shr-unsupported-shr.c: New file.
3840 * gdb.base/hbreak-in-shr-unsupported.c: New file.
3841 * gdb.base/hbreak-in-shr-unsupported.exp: New file.
3842 * gdb.base/hbreak-unmapped.c: New file.
3843 * gdb.base/hbreak-unmapped.exp: New file.
3844 * gdb.trace/qtro.exp (gdb_is_target_remote): Move ...
3845 * lib/gdb.exp (gdb_is_target_remote): ... here.
3847 2014-04-22 Pedro Alves <palves@redhat.com>
3849 * gdb.base/consecutive-step-over.c: New file.
3850 * gdb.base/consecutive-step-over.exp: New file.
3852 2014-04-22 Pedro Alves <palves@redhat.com>
3854 * lib/gdb.exp (gdb_continue_to_breakpoint): Use gdb_test_multiple
3855 instead of send_gdb/gdb_expect.
3857 2014-04-22 Yao Qi <yao@codesourcery.com>
3859 * lib/trace-support.exp (generate_tracefile): New procedure.
3860 * gdb.trace/tfile.exp: Skip the test if generate_tracefile
3862 * gdb.trace/mi-traceframe-changed.exp: Invoke test_tfind_tfile
3863 if generate_tracefile returns 1.
3865 2014-04-18 Tom Tromey <palves@redhat.com>
3866 Pedro alves <tromey@redhat.com>
3869 * gdb.opt/inline-bt.exp: Test backtracing from an inline function
3870 with a backtrace limit.
3871 * gdb.python/py-frame-inline.exp: Test running to an inline
3872 function with a backtrace limit, and printing the newest frame.
3873 * gdb.python/py-frame-inline.c (main): Call f.
3875 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
3877 * gdb.java/jnpe.exp: Drop srcdir from untested path.
3879 2014-04-17 Marcus Shawcroft <marcus.shawcroft@arm.com>
3881 * lib/gdb.exp (gdb_compile_pthreads, gdb_compile_objc):
3882 Drop prefix from unsupported source file path.
3884 2014-04-17 Yao Qi <yao@codesourcery.com>
3886 * lib/gdb.exp (with_target_charset): New proc.
3887 * gdb.base/printcmds.exp (test_print_all_chars): Wrap tests with
3888 with_target_charset.
3889 (test_print_strings): Likewise.
3890 (test_repeat_bytes): Likewise.
3891 * gdb.base/setvar.exp: Set target-charset to ASCII temporarily
3894 2014-04-16 Keith Seitz <keiths@redhat.com>
3897 * gdb.dwarf2/corrupt.c: New file.
3898 * gdb.dwarf2/corrupt.exp: New file.
3900 2014-04-16 Keith Seitz <keiths@redhat.com>
3903 * gdb.cp/namelessclass.cc: New file.
3904 * gdb.cp/namelessclass.exp: New file.
3905 * gdb.cp/namelessclass.S: New file.
3907 2014-04-16 Doug Evans <dje@google.com>
3909 * lib/gdbserver-support.exp (gdbserver_default_get_remote_address):
3911 (gdbserver_default_get_comm_port): New function.
3912 (gdbserver_start): Check if board file provided
3913 "gdbserver,get_comm_port" and use it if so.
3914 * boards/native-stdio-gdbserver.exp (sockethost): Set to "".
3915 (gdb,socketport): Set to "stdio".
3916 (gdbserver,get_comm_port): Set to ${board}_get_comm_port.
3917 (stdio_gdbserver_template): Delete.
3918 (${board}_get_remote_address): Update.
3919 (${board}_build_remote_cmd): Delete.
3920 (${board}_get_comm_port): New function.
3921 (${board}_spawn): Update.
3922 * boards/remote-stdio-gdbserver.exp (${board}_build_remote_cmd):
3924 (${board}_get_remote_address): Update.
3925 (${board}_get_comm_port): New function.
3927 2014-04-16 Andrew Burgess <aburgess@broadcom.com>
3929 * gdb.base/memattr.exp: Improve regexps to handle memory regions
3930 appearing in any order.
3932 2014-04-15 Doug Evans <dje@google.com>
3934 * gdb.gdb/selftest.exp (do_steps_and_nexts): Don't reference
3935 uninitialized value of "description".
3937 2014-04-15 Keith Seitz <keiths@redhat.com>
3939 * gdb.mi/mi-simplerun.exp (test_breakpoints_creation_and_listing):
3940 Remove unused globals.
3941 (test_running_the_program): Likewise.
3942 (test_controlled_execution): Likewise.
3943 (test_controlling_breakpoints): Likewise.
3944 (test_program_termination): Likewise.
3946 2014-04-15 Keith Seitz <keiths@redhat.com>
3948 * gdb.mi/mi-break.exp (test_tbreak_creation_and_listing): Remove
3950 (test_rbreak_creation_and_listing): Likewise.
3951 (test_ignore_count): Likewise.
3952 (test_error): Likewise.
3954 2014-04-15 Pedro Alves <palves@redhat.com>
3956 * gdb.base/sym-file-loader.h: Move inclusion of <inttypes.h>,
3957 <ansidecl.h>, <elf/common.h> and <elf/external.h> to
3959 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
3960 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
3961 to sym-file-loader.c.
3962 (struct library): Forward declare.
3963 (load_shlib, lookup_function): Change prototypes.
3964 (find_shstrtab, find_strtab, find_shdr, find_symtab)
3965 (translate_offset): Remove declarations.
3966 (get_text_addr): New declaration.
3967 * gdb.base/sym-file-loader.c: Move inclusion of <inttypes.h>,
3968 <ansidecl.h>, <elf/common.h> and <elf/external.h> here from
3970 (Elf_External_Phdr, Elf_External_Ehdr, Elf_External_Shdr)
3971 (Elf_External_Sym, Elf_Addr, GET, GETADDR, struct segment): Move
3972 here from sym-file-loader.h.
3973 (struct library): New structure.
3974 (load_shlib, lookup_function): Change prototypes and adjust to
3975 work with a struct library.
3976 (find_shstrtab, find_strtab, find_shdr, find_symtab)
3977 (translate_offset): Make static.
3978 (get_text_addr): New function.
3979 * gdb.base/sym-file-main.c (main): Adjust to new loader interface.
3981 2014-04-15 Pedro Alves <palves@redhat.com>
3983 * gdb.base/sym-file-loader.c: Fix typo. SELF_LINK, not SELK_LINK.
3985 2014-04-15 Pedro Alves <palves@redhat.com>
3987 * gdb.base/sym-file-loader.c: Include <limits.h>.
3988 (SELF_LINK): New define.
3989 (get_origin): New function.
3990 (load_shlib): Use it.
3991 * gdb.base/sym-file.exp: Don't early return if the target is
3992 remote. Use runto_main, and issue fail is that fails. Use
3994 (shlib_name): Delete.
3995 (lib_so, lib_syms, lib_dlopen): New globals. Use them throughout.
3997 2014-04-15 Pedro Alves <palves@redhat.com>
3999 * gdb.base/sym-file.exp: Remove regex characters from test
4000 message. Don't refer to breakpoint numbers in test messages.
4002 2014-04-14 Keith Seitz <keiths@redhat.com>
4005 * gdb.cp/var-tag.cc: New file.
4006 * gdb.cp/var-tag.exp: New file.
4007 * gdb.dwarf2/dw2-ada-ffffffff.exp: Set the language to C++.
4008 * gdb.dwarf2/dw2-anon-mptr.exp: Likewise.
4009 * gdb.dwarf2/dw2-double-set-die-type.exp: Likewise.
4010 * gdb.dwarf2/dw2-inheritance.exp: Likewise.
4012 2014-04-14 Tom Tromey <tromey@redhat.com>
4014 * gdb.cp/classes.exp (test_enums): Handle underlying type.
4015 * gdb.dwarf2/enum-type.exp: Add test for enum with underlying
4017 * gdb.cp/enum-class.exp: New file.
4018 * gdb.cp/enum-class.cc: New file.
4020 2014-04-14 Tom Tromey <tromey@redhat.com>
4022 * gdb.dwarf2/enum-type.exp: New file.
4024 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
4026 * gdb.mi/mi-vla-c99.exp: New file.
4027 * gdb.mi/vla.c: New file.
4029 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
4031 * gdb.base/vla-datatypes.c: New file.
4032 * gdb.base/vla-datatypes.exp: New file.
4034 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
4036 * gdb.base/vla-ptr.c: New file.
4037 * gdb.base/vla-ptr.exp: New file.
4039 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
4041 * gdb.dwarf2/count.exp: New file.
4043 2014-04-14 Sanimir Agovic <sanimir.agovic@intel.com>
4045 * gdb.base/vla-sideeffect.c: New file.
4046 * gdb.base/vla-sideeffect.exp: New file.
4048 2014-04-14 David Blaikie <dblaikie@gmail.com>
4050 * gdb.mi/non-stop.c: Add return value for non-void function return
4052 * gdb.threads/staticthreads.c: Ditto.
4054 2014-04-12 Siva Chandra Reddy <sivachandra@google.com>
4055 Doug Evans <xdje42@gmail.com>
4057 * gdb.guile/scm-value.c: Improve test case.
4058 * gdb.guile/scm-value.exp: Add new test.
4060 2014-04-11 David Blaikie <dblaikie@gmail.com>
4062 * gdb.opt/inline-break.exp: Explicitly specify -std=gnu89 to
4063 override Clang's default.
4065 2014-04-11 Joel Brobecker <brobecker@adacore.com>
4067 Revert the following changes (regressions):
4069 * gdb.base/vla-sideeffect.c: New file.
4070 * gdb.base/vla-sideeffect.exp: New file.
4072 * gdb.dwarf2/count.exp: New file.
4074 * gdb.base/vla-multi.c: New file.
4075 * gdb.base/vla-multi.exp: New file.
4077 * gdb.base/vla-ptr.c: New file.
4078 * gdb.base/vla-ptr.exp: New file.
4080 * gdb.base/vla-datatypes.c: New file.
4081 * gdb.base/vla-datatypes.exp: New file.
4083 * gdb.mi/mi-vla-c99.exp: New file.
4084 * gdb.mi/vla.c: New file.
4086 2014-04-11 Keith Seitz <keiths@redhat.com>
4089 * gdb.cp/cpsizeof.exp: New file.
4090 * gdb.cp/cpsizeof.cc: New file.
4092 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
4094 * gdb.mi/mi-vla-c99.exp: New file.
4095 * gdb.mi/vla.c: New file.
4097 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
4099 * gdb.base/vla-datatypes.c: New file.
4100 * gdb.base/vla-datatypes.exp: New file.
4102 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
4104 * gdb.base/vla-ptr.c: New file.
4105 * gdb.base/vla-ptr.exp: New file.
4107 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
4109 * gdb.base/vla-multi.c: New file.
4110 * gdb.base/vla-multi.exp: New file.
4112 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
4114 * gdb.dwarf2/count.exp: New file.
4116 2014-04-11 Sanimir Agovic <sanimir.agovic@intel.com>
4118 * gdb.base/vla-sideeffect.c: New file.
4119 * gdb.base/vla-sideeffect.exp: New file.
4121 2014-04-11 Yao Qi <yao@codesourcery.com>
4123 * gdb.base/completion.exp: Check file exists before running tests
4126 2014-04-10 Pedro Alves <palves@redhat.com>
4128 * gdb.base/cond-eval-mode.c: New file.
4129 * gdb.base/cond-eval-mode.exp: Use standard_testfile. Adjust
4130 prepare_for_testing to build the new file. Check result of
4132 (test_break, test_watch): New procedures.
4133 (top level): Use them.
4135 2014-04-08 Pierre Muller <muller@sourceware.org>
4137 * gdb.base/printcmds.exp (test_artificial_arrays): Disable
4138 Ctrl-V use for mingw hosts.
4140 2014-04-07 Siva Chandra Reddy <sivachandra@google.com>
4142 * gdb.python/py-value.c: Improve test case.
4143 * gdb.python/py-value.exp: Add new test.
4145 2014-04-07 David Blaikie <dblaikie@gmail.com>
4147 * lib/compiler.c: Identify the clang compiler.
4148 * lib/compiler.cc: Ditto.
4150 2014-04-03 Yao Qi <yao@codesourcery.com>
4152 * gdb.base/setshow.exp: Invoke string_to_regexp to HOME and PWD.
4154 2014-04-01 Anton Blanchard <anton@samba.org>
4156 * gdb.arch/ppc64-atomic-inst.exp: Use untested. Make test
4159 2014-04-01 Anton Blanchard <anton@samba.org>
4161 * gdb.arch/ppc64-atomic-inst.exp: Use standard_testfile,
4162 prepare_for_testing.
4164 2014-04-01 Anton Blanchard <anton@samba.org>
4166 * gdb.arch/ppc64-atomic-inst.c: Remove.
4167 * gdb.arch/ppc64-atomic-inst.S: New file.
4168 * gdb.arch/ppc64-atomic-inst.exp: Adapt for asm based testcase.
4170 2014-03-31 Doug Evans <dje@google.com>
4172 * gdb.base/print-symbol-loading-lib.c: New file.
4173 * gdb.base/print-symbol-loading-main.c: New file.
4174 * gdb.base/print-symbol-loading.exp: New file.
4176 2014-03-31 Yao Qi <yao@codesourcery.com>
4178 * gdb.base/source-dir.exp: Allow ';' as a directory separator.
4180 2014-03-28 Joel Brobecker <brobecker@adacore.com>
4182 * gdb.ada/mi_dyn_arr: New testcase.
4184 2014-03-27 Doug Evans <dje@google.com>
4186 * gdb.dwarf2/dw2-abs-hi-pc.exp: Build tests with "nodebug".
4188 2014-03-27 Yao Qi <yao@codesourcery.com>
4190 * lib/gdb.exp (can_single_step_to_signal_handler): Return zero
4191 if target is nios2-*-*.
4193 2014-03-26 Yao Qi <yao@codesourcery.com>
4195 * lib/gdb.exp (readline_is_used): New proc.
4196 * gdb.base/completion.exp: Move tests on command complete up.
4197 Skip the rest of tests if readline is not used.
4198 * gdb.ada/complete.exp: Skp the test if readline is not
4200 * gdb.base/filesym.exp: Likewise.
4201 * gdb.base/macscp.exp: Likewise.
4202 * gdb.base/readline-ask.exp: Likewise.
4203 * gdb.base/readline.exp: Likewise.
4204 * gdb.python/py-cmd.exp: Likewise.
4205 * gdb.trace/tfile.exp: Likewise.
4207 2014-03-26 Yao Qi <yao@codesourcery.com>
4209 * gdb.base/macscp.exp: Fix code format issues.
4211 2014-03-25 Ulrich Weigand <uweigand@de.ibm.com>
4213 * gdb.asm/asm-source.exp: Handle powerpc64le-* targets.
4214 * gdb.asm/powerpc64le.inc: New file.
4216 2014-03-25 Pedro Alves <palves@redhat.com>
4217 Doug Evans <dje@google.com>
4219 * gdb.base/source-execution.c: New file.
4220 * gdb.base/source-execution.exp: New file.
4221 * gdb.base/source-execution.gdb: New file.
4223 2014-03-24 Doug Evans <dje@google.com>
4225 * gdb.linespec/macro-relative.exp: Mark the test as unsupported if
4228 2014-03-24 Hui Zhu <hui@codesourcery.com>
4229 Pedro Alves <palves@redhat.com>
4231 PR breakpoints/16101
4232 * gdb.base/dprintf.exp: Use unsupported rather than changing the
4233 test pass/fail messages. Detect missing support for dprintf when
4234 breakpoints are actually inserted.
4235 * gdb.base/mi-dprintf.exp: Detect missing support for dprintf when
4236 breakpoints are actually inserted.
4237 * lib/mi-support.exp (mi_run_cmd_full): Return -1 if continue
4240 2014-03-24 Jan Kratochvil <jan.kratochvil@redhat.com>
4242 * gdb.base/gdb-sigterm.exp (do_test): Remove "set debug lin-lwp 1".
4244 2014-03-22 Doug Evans <xdje42@gmail.com>
4246 * gdb.python/python.exp (python not supported): Verify multi-line
4247 python command issues an error.
4248 * gdb.guile/guile.exp (guile not supported): Verify multi-line
4249 guile command issues an error.
4251 2014-03-21 Maciej W. Rozycki <macro@codesourcery.com>
4253 * gdb.threads/thread-specific.exp: Handle the lack of usable
4254 $this_breakpoint and $this_thread.
4256 2014-03-21 Hui Zhu <hui@codesourcery.com>
4258 * gdb.base/attach.exp (do_command_attach_tests): New.
4260 2014-03-20 Tom Tromey <tromey@redhat.com>
4261 Pedro Alves <palves@redhat.com>
4264 * gdb.base/condbreak-call-false.c: New file.
4265 * gdb.base/condbreak-call-false.exp: New file.
4267 2014-03-20 Pedro Alves <palves@redhat.com>
4269 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (pid):
4271 (block_signals, unblock_signals): Delete.
4272 (child_function_2, main): Remove references to deleted variable
4275 2014-03-20 Pedro Alves <palves@redhat.com>
4277 * gdb.threads/signal-while-stepping-over-bp-other-thread.c (main):
4278 Use pthread_kill to signal thread 2.
4279 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4280 Adjust to make the test send itself a signal rather than using the
4281 host's "kill" command.
4283 2014-03-20 Pedro Alves <palves@redhat.com>
4285 * gdb.threads/multiple-step-overs.c: New file.
4286 * gdb.threads/multiple-step-overs.exp: New file.
4287 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4288 Adjust expected infrun debug output.
4290 2014-03-20 Pedro Alves <palves@redhat.com>
4292 * gdb.threads/step-over-trips-on-watchpoint.c: New file.
4293 * gdb.threads/step-over-trips-on-watchpoint.exp: New file.
4295 2014-03-20 Pedro Alves <palves@redhat.com>
4298 * gdb.base/watchpoint.exp: Mention bugzilla bug number instead of
4299 old gnats gdb/38. Remove kfail. Adjust to use gdb_test instead
4300 of gdb_test_multiple.
4301 * gdb.cp/annota2.exp: Remove kfail for gdb/38.
4302 * gdb.cp/annota3.exp: Remove kfail for gdb/38.
4304 2014-03-20 Pedro Alves <palves@redhat.com>
4306 * gdb.threads/step-over-lands-on-breakpoint.c: New file.
4307 * gdb.threads/step-over-lands-on-breakpoint.exp: New file.
4309 2014-03-19 Pedro Alves <palves@redhat.com>
4311 * gdb.base/async.exp: Remove early return.
4313 2014-03-19 Pedro Alves <palves@redhat.com>
4315 * gdb.base/async.exp (step& tests): Pass explicit test messages.
4317 2014-03-19 Pedro Alves <palves@redhat.com>
4319 * gdb.base/async.exp (test_background): Expect \r\n after
4320 "completed." in the fail pattern.
4322 2014-03-19 Pedro Alves <palves@redhat.com>
4324 * gdb.base/async.exp (test_background): New procedure.
4325 Use it for all background execution command tests.
4327 2014-03-19 Pedro Alves <palves@redhat.com>
4329 * gdb.base/async.exp: Use prepare_for_testing.
4331 2014-03-19 Pedro Alves <palves@redhat.com>
4333 * gdb.base/async.c (foo): Make 'x' volatile. Write to it twice in
4336 2014-03-19 Pedro Alves <palves@redhat.com>
4338 * gdb.base/async.c (main): Add "jump here" and "until here" line
4340 * gdb.base/async.exp (jump_here): New global.
4341 (jump& test): Use it.
4342 (until_here): New global.
4343 (until& test): Use it.
4345 2014-03-19 Pedro Alves <palves@redhat.com>
4347 * gdb.base/async.exp: Don't frob gdb_protocol.
4349 2014-03-18 Doug Evans <xdje42@gmail.com>
4351 * gdb.base/async.exp: Whitespace fixes. Turn on target-async.
4352 Fix spelling of exec-done-display.
4354 2014-03-18 Jan Kratochvil <jan.kratochvil@redhat.com>
4357 * gdb.base/gdb-sigterm.c: New file.
4358 * gdb.base/gdb-sigterm.exp: New file.
4360 2014-03-18 Pedro Alves <palves@redhat.com>
4363 * gdb.mi/mi-solib.exp: Remove gdb/13860 kfail.
4364 * lib/mi-support.exp (mi_expect_stop): Add special handling for
4367 2014-03-17 Joel Brobecker <brobecker@adacore.com>
4369 * gdb.ada/pckd_arr_ren: New testcase.
4371 2014-03-13 Doug Evans <xdje42@gmail.com>
4374 * gdb.guile/scm-value.ep (test_value_after_death): Do a garbage
4375 collect after discarding symbols.
4377 2014-03-13 Ludovic Courtès <ludo@gnu.org>
4378 Doug Evans <xdje42@gmail.com>
4380 * gdb.guile/scm-value.exp (test_value_in_inferior): Verify value added
4381 to history survives a gc.
4383 2014-03-13 Pedro Alves <palves@redhat.com>
4385 * gdb.base/default.exp: Don't test "target procfs".
4387 2014-03-13 Pedro Alves <palves@redhat.com>
4389 * gdb.base/default.exp: Update "target child" and "target procfs"
4390 tests to not expect "Unix".
4392 2014-03-12 Tom Tromey <tromey@redhat.com>
4394 * gdb.base/corefile.exp (corefile_test_run, corefile_test_attach):
4395 New procs. Add target-async tests.
4396 * gdb.reverse/break-precsave.exp (precsave_tests): New proc.
4397 Add target-async tests.
4399 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4401 * gdb.dwarf2/dw2-ifort-parameter.c (func): Define labels
4402 'func_start' and 'func_end' for the beginning and end of the
4403 function code, respectively.
4404 * gdb.dwarf2/dw2-ifort-parameter.exp: Use 'func_start' and
4405 'func_end' instead of 'func' and 'main'.
4407 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4409 * gdb.dwarf2/dw2-ifort-parameter-debug.S: Remove.
4410 * gdb.dwarf2/dw2-ifort-parameter.exp: Use Dwarf::assemble to
4411 generate the debug info assembler source.
4413 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4415 * gdb.dwarf2/arr-stride.exp: Exploit 'prepare_for_testing'.
4416 * gdb.dwarf2/arr-subrange.exp: Likewise.
4417 * gdb.dwarf2/dwz.exp: Likewise.
4418 * gdb.dwarf2/method-ptr.exp: Likewise.
4419 * gdb.dwarf2/missing-sig-type.exp: Likewise.
4420 * gdb.dwarf2/subrange.exp: Likewise.
4421 * gdb.dwarf2/implptrconst.exp: Exploit 'build_executable'.
4422 * gdb.dwarf2/implptrpiece.exp: Likewise.
4423 * gdb.dwarf2/nostaticblock.exp: Likewise.
4425 2014-03-12 Andreas Arnez <arnez@linux.vnet.ibm.com>
4427 * lib/gdb.exp (build_executable_from_specs): Don't prepend source
4428 directory to absolute path name arguments.
4430 2014-03-10 Joel Brobecker <brobecker@adacore.com>
4432 * gdb.ada/tagged_access: New testcase.
4434 2014-03-07 Markus Metzger <markus.t.metzger@intel.com>
4436 * gdb.btrace/data.exp: Update expected output.
4438 2014-03-06 Yao Qi <yao@codesourcery.com>
4440 * gdb.trace/pr16508.exp: New file.
4442 2014-03-05 Pedro Alves <palves@redhat.com>
4445 * gdb.base/breakpoint-shadow.exp (compare_disassembly): New
4447 (top level): Adjust to use it. Add tests that exercise breakpoint
4448 interaction with the code-cache.
4450 2014-02-26 Ludovic Courtès <ludo@gnu.org>
4452 * gdb.guile/scm-value.exp (test_value_in_inferior): Add
4453 test for 'history-append!'.
4455 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4457 * gdb.dwarf2/dw2-abs-hi-pc-hello-dbg.S: New file.
4458 * gdb.dwarf2/dw2-abs-hi-pc-hello.c: New file.
4459 * gdb.dwarf2/dw2-abs-hi-pc-world-dbg.S: New file.
4460 * gdb.dwarf2/dw2-abs-hi-pc-world.c: New file.
4461 * gdb.dwarf2/dw2-abs-hi-pc.c: New file.
4462 * gdb.dwarf2/dw2-abs-hi-pc.exp: New file.
4464 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4466 * testsuite/gdb.python/py-pp-re-notag.c: New file.
4467 * testsuite/gdb.python/py-pp-re-notag.ex: New file.
4468 * testsuite/gdb.python/py-pp-re-notag.p: New file.
4470 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4472 * gdb.dwarf2/arr-subrange.c, gdb.dwarf2/arr-subrange.exp: New files.
4474 2014-02-26 Joel Brobecker <brobecker@adacore.com>
4476 * gdb.dwarf2/arr-stride.c: New file.
4477 * gdb.dwarf2/arr-stride.exp: New file.
4479 2014-02-26 Pedro Alves <palves@redhat.com>
4481 * gdb.ada/tasks.exp: Set a task-specific breakpoint at break_me
4482 that won't ever trigger. Make sure that GDB reports the correct
4483 breakpoint that caused the stop.
4485 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
4488 * gdb.base/auto-load-script: New file.
4489 * gdb.base/auto-load.c: New file.
4490 * gdb.base/auto-load.exp: New file.
4493 * gdb.base/auto-load.exp: Fix out-of-srctree run.
4495 2014-02-25 Jan Kratochvil <jan.kratochvil@redhat.com>
4497 Fix dw2-icycle.exp -fsanitize=address GDB crash.
4498 * gdb.dwarf2/dw2-icycle.S: Remove all DW_AT_sibling.
4500 2014-02-24 Doug Evans <dje@google.com>
4502 * lib/gdb.exp (run_on_host): Log error output if program fails.
4504 2014-02-21 Pedro Alves <palves@redhat.com>
4506 * gdb.threads/step-after-sr-lock.c: Rename to ...
4507 * gdb.threads/signal-while-stepping-over-bp-other-thread.c: ... this.
4508 * gdb.threads/step-after-sr-lock.exp: Rename to ...
4509 * gdb.threads/signal-while-stepping-over-bp-other-thread.exp:
4512 2014-02-20 Sergio Durigan Junior <sergiodj@redhat.com>
4515 * gdb.arch/amd64-stap-special-operands.exp: New file.
4516 * gdb.arch/amd64-stap-three-arg-disp.S: Likewise.
4517 * gdb.arch/amd64-stap-three-arg-disp.c: Likewise.
4518 * gdb.arch/amd64-stap-triplet.S: Likewise.
4519 * gdb.arch/amd64-stap-triplet.c: Likewise.
4521 2014-02-20 Joel Brobecker <brobecker@adacore.com>
4523 * gdb.dwarf2/dw2-icycle.S: Remove second and third parameters
4524 in .section pseudo-op.
4526 2014-02-20 lin zuojian <manjian2006@gmail.com>
4527 Joel Brobecker <brobecker@adacore.com>
4528 Doug Evans <xdje42@gmail.com>
4531 * gdb.dwarf2/dw2-icycle.S: New file.
4532 * gdb.dwarf2/dw2-icycle.c: New file.
4533 * gdb.dwarf2/dw2-icycle.exp: New file.
4535 2014-02-19 Siva Chandra Reddy <sivachandra@google.com>
4537 * gdb.python/py-value-cc.cc: Improve test case to enable testing
4538 operations on gdb.Value objects.
4539 * gdb.python/py-value-cc.exp: Add new test to test operations on
4542 2014-02-18 Doug Evans <dje@google.com>
4544 * Makefile.in (TESTS): New variable.
4545 (expanded_tests, expanded_tests_or_none): New variables
4546 (check-single): Pass $(expanded_tests_or_none) to runtest.
4547 (check-parallel): Only run tests in $(TESTS) if non-empty.
4548 (check/no-matching-tests-found): New rule.
4549 * README: Document TESTS makefile variable.
4551 2014-02-18 Doug Evans <dje@google.com>
4553 * Makefile.in (check-parallel): rm -rf outputs temp.
4555 2014-02-16 Jan Kratochvil <jan.kratochvil@redhat.com>
4557 Fix "ERROR: no fileid for" in the testsuite.
4558 * lib/gdb.exp (gdb_finish): Check gdb_spawn_id.
4560 2014-02-12 Doug Evans <dje@google.com>
4562 * gdb.dwarf2/Makefile.in (EXECUTABLES): Add dwp-symlink.
4563 (MISCELLANEOUS): New variable.
4564 (clean): rm -rf $(MISCELLANEOUS).
4565 * gdb.dwarf2/dwp-symlink.exp: Test the case where the executable and
4566 dwp live in the same directory as symlinks, with each symlink pointed
4567 to a differently named file in a different directory.
4569 2014-02-11 Doug Evans <dje@google.com>
4571 * gdb.dwarf2/dwp-symlink.exp: Rewrite to use remote_* commands instead
4572 of Tcl file commands.
4574 2014-02-10 Mark Kettenis <kettenis@gnu.org>
4576 * gdb.threads/step-after-sr-lock.exp: Avoid executing
4579 2014-02-10 Joel Brobecker <brobecker@adacore.com>
4581 * gdb.ada/tick_length_array_enum_idx: New testcase.
4583 2014-02-10 Doug Evans <xdje42@gmail.com>
4585 * configure.ac (AC_OUTPUT): Add gdb.guile.
4586 * configure: Regenerate.
4587 * lib/gdb-guile.exp: New file.
4588 * lib/gdb.exp (get_target_charset): New function.
4589 * gdb.base/help.exp: Update expected output from "apropos apropos".
4590 * gdb.guile/Makefile.in: New file.
4591 * gdb.guile/guile.exp: New file.
4592 * gdb.guile/scm-arch.c: New file.
4593 * gdb.guile/scm-arch.exp: New file.
4594 * gdb.guile/scm-block.c: New file.
4595 * gdb.guile/scm-block.exp: New file.
4596 * gdb.guile/scm-breakpoint.c: New file.
4597 * gdb.guile/scm-breakpoint.exp: New file.
4598 * gdb.guile/scm-disasm.c: New file.
4599 * gdb.guile/scm-disasm.exp: New file.
4600 * gdb.guile/scm-equal.c: New file.
4601 * gdb.guile/scm-equal.exp: New file.
4602 * gdb.guile/scm-error.exp: New file.
4603 * gdb.guile/scm-error.scm: New file.
4604 * gdb.guile/scm-frame-args.c: New file.
4605 * gdb.guile/scm-frame-args.exp: New file.
4606 * gdb.guile/scm-frame-args.scm: New file.
4607 * gdb.guile/scm-frame-inline.c: New file.
4608 * gdb.guile/scm-frame-inline.exp: New file.
4609 * gdb.guile/scm-frame.c: New file.
4610 * gdb.guile/scm-frame.exp: New file.
4611 * gdb.guile/scm-generics.exp: New file.
4612 * gdb.guile/scm-gsmob.exp: New file.
4613 * gdb.guile/scm-iterator.c: New file.
4614 * gdb.guile/scm-iterator.exp: New file.
4615 * gdb.guile/scm-math.c: New file.
4616 * gdb.guile/scm-math.exp: New file.
4617 * gdb.guile/scm-objfile-script-gdb.in: New file.
4618 * gdb.guile/scm-objfile-script.c: New file.
4619 * gdb.guile/scm-objfile-script.exp: New file.
4620 * gdb.guile/scm-objfile.c: New file.
4621 * gdb.guile/scm-objfile.exp: New file.
4622 * gdb.guile/scm-ports.exp: New file.
4623 * gdb.guile/scm-pretty-print.c: New file.
4624 * gdb.guile/scm-pretty-print.exp: New file.
4625 * gdb.guile/scm-pretty-print.scm: New file.
4626 * gdb.guile/scm-section-script.c: New file.
4627 * gdb.guile/scm-section-script.exp: New file.
4628 * gdb.guile/scm-section-script.scm: New file.
4629 * gdb.guile/scm-symbol.c: New file.
4630 * gdb.guile/scm-symbol.exp: New file.
4631 * gdb.guile/scm-symtab-2.c: New file.
4632 * gdb.guile/scm-symtab.c: New file.
4633 * gdb.guile/scm-symtab.exp: New file.
4634 * gdb.guile/scm-type.c: New file.
4635 * gdb.guile/scm-type.exp: New file.
4636 * gdb.guile/scm-value-cc.cc: New file.
4637 * gdb.guile/scm-value-cc.exp: New file.
4638 * gdb.guile/scm-value.c: New file.
4639 * gdb.guile/scm-value.exp: New file.
4640 * gdb.guile/source2.scm: New file.
4641 * gdb.guile/types-module.cc: New file.
4642 * gdb.guile/types-module.exp: New file.
4644 2014-02-10 Yao Qi <yao@codesourcery.com>
4647 * configure.ac: Append gdb.gdb/Makefile in AC_OUTPUT.
4648 * configure: Regenerated.
4649 * Makefile.in: New file.
4651 2014-02-08 Andreas Schwab <schwab@linux-m68k.org>
4653 * gdb.python/py-framefilter.exp: Fix typo.
4655 2014-02-08 Yao Qi <yao@codesourcery.com>
4657 * gdb.mi/mi-breakpoint-changed.exp (test_insert_delete_modify): Test
4658 that no =breakpoint-modified is emitted when breakpoints are
4659 modified through MI commands.
4661 2014-02-07 Pedro Alves <pedro@codesourcery.com>
4662 Pedro Alves <palves@redhat.com>
4664 * gdb.threads/step-after-sr-lock.c: New file.
4665 * gdb.threads/step-after-sr-lock.exp: New file.
4667 2014-02-07 Pedro Alves <palves@redhat.com>
4669 * gdb.threads/stepi-random-signal.exp: Set SIGCHLD to print.
4671 2014-02-06 Jan Kratochvil <jan.kratochvil@redhat.com>
4673 Fix i386-sse-stack-align.exp regression since GDB_PARALLEL.
4674 * gdb.arch/i386-sse-stack-align.exp: Use standard_output_file.
4676 2014-02-06 Doug Evans <xdje42@gmail.com>
4678 * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected
4681 * gdb.gdb/python-interrupts.exp: New file.
4683 2014-02-05 Yao Qi <yao@codesourcery.com>
4685 * gdb.trace/report.exp (use_collected_data): Test the output
4686 of "info threads" and "info inferiors".
4688 2014-02-05 Yao Qi <yao@codesourcery.com>
4692 2013-05-24 Yao Qi <yao@codesourcery.com>
4694 * gdb.trace/tfile.exp: Test inferior and thread.
4696 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4698 * gdb.base/sigbpt.exp: Do not use "*" when setting breakpoint
4700 * gdb.base/step-bt.c: Call hello via function pointer to make
4701 sure its first instruction is executed on powerpc64le-linux.
4703 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4705 * gdb.arch/powerpc-d128-regs.exp: Enable on powerpc64*-*.
4707 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4709 * gdb.arch/vsx-regs.exp: Check target endianness. Provide variants
4710 of the test patterns for use on little-endian systems.
4712 2014-02-04 Ulrich Weigand <uweigand@de.ibm.com>
4714 * gdb.arch/altivec-regs.exp: Use gdb_test_multiple for endian test.
4715 (decimal_vector): Fix for little-endian.
4717 2014-01-29 Jose E. Marchesi <jose.marchesi@oracle.com>
4719 * gdb.arch/sparc-sysstep.exp: New file.
4720 * gdb.arch/sparc-sysstep.c: Likewise.
4722 * gdb.arch/Makefile.in (EXECUTABLES): Add sparc-sysstep.
4724 2014-01-28 Edjunior Barbosa Machado <emachado@linux.vnet.ibm.com>
4726 * gdb.base/info-shared.exp: Expect leading `.' on ppc64's symbols.
4728 2014-01-23 Tom Tromey <tromey@redhat.com>
4730 * gdb.ada/array_char_idx: New testcase.
4732 2014-01-23 Tom Tromey <tromey@redhat.com>
4735 * gdb.python/py-framefilter.exp: Add test using "Error" filter.
4736 * gdb.python/py-framefilter.py (ErrorInName, ErrorFilter): New
4739 2014-01-23 Tom Tromey <tromey@redhat.com>
4742 * gdb.python/py-framefilter.py (Reverse_Function.function): Read a
4743 string from an inferior frame.
4744 * gdb.python/py-framefilter-mi.exp: Update.
4746 2014-01-22 Doug Evans <dje@google.com>
4748 * gdb.server/server-mon.exp: Add tests for "set debug-format".
4750 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4752 * gdb.base/catch-syscall.exp: Activate test on s390*-linux.
4754 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4756 * gdb.trace/entry-values.exp: Remove excess space character from
4757 regex patterns. Handle s390 call instruction.
4759 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4761 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Insert alignment and
4762 define "*_start" label. Make "name" static.
4763 * gdb.dwarf2/dw2-dir-file-name.exp: Replace references to
4764 ${name} by references to ${name}_start.
4766 2014-01-22 Andreas Arnez <arnez@vnet.linux.ibm.com>
4768 * gdb.base/info-macros.exp: Remove "debug" from the compile
4771 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4773 * gdb.dlang/demangle.exp: New file.
4775 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4777 * gdb.dlang/primitive-types.exp: New file.
4779 2014-01-17 Iain Buclaw <ibuclaw@gdcproject.org>
4781 * configure.ac: Create gdb.dlang/Makefile.
4782 * configure: Regenerate.
4783 * Makefile.in (ALL_SUBDIRS): Add gdb.dlang.
4784 * gdb.dlang/Makefile.in: New file.
4785 * lib/d-support.exp: New file.
4786 * lib/gdb.exp (skip_d_tests): New proc.
4788 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4790 * gdb.btrace/delta.exp: Check reverse stepi.
4791 * gdb.btrace/tailcall.exp: Update. Add stepping tests.
4792 * gdb.btrace/finish.exp: New.
4793 * gdb.btrace/next.exp: New.
4794 * gdb.btrace/nexti.exp: New.
4795 * gdb.btrace/record_goto.c: Add comments.
4796 * gdb.btrace/step.exp: New.
4797 * gdb.btrace/stepi.exp: New.
4798 * gdb.btrace/multi-thread-step.c: New.
4799 * gdb.btrace/multi-thread-step.exp: New.
4800 * gdb.btrace/rn-dl-bind.c: New.
4801 * gdb.btrace/rn-dl-bind.exp: New.
4802 * gdb.btrace/data.c: New.
4803 * gdb.btrace/data.exp: New.
4804 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
4806 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4808 * gdb.btrace/Makefile.in (EXECUTABLES): Add delta.
4809 * gdb.btrace/exception.exp: Update.
4810 * gdb.btrace/instruction_history.exp: Update.
4811 * gdb.btrace/record_goto.exp: Update.
4812 * gdb.btrace/tailcall.exp: Update.
4813 * gdb.btrace/unknown_functions.exp: Update.
4814 * gdb.btrace/delta.exp: New.
4816 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4818 * gdb.btrace/record_goto.exp: Add backtrace test.
4819 * gdb.btrace/tailcall.exp: Add backtrace test.
4821 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4823 * gdb.btrace/Makefile.in (EXECUTABLES): Add record_goto.
4824 * gdb.btrace/record_goto.c: New.
4825 * gdb.btrace/record_goto.exp: New.
4826 * gdb.btrace/x86-record_goto.S: New.
4828 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4830 * gdb.btrace/function_call_history.exp: Update tests.
4831 * gdb.btrace/instruction_history.exp: Update tests.
4833 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4835 * gdb.btrace/function_call_history.exp: Fix expected field
4836 order for "record function-call-history".
4837 Add new tests for "record function-call-history /c".
4838 * gdb.btrace/exception.cc: New.
4839 * gdb.btrace/exception.exp: New.
4840 * gdb.btrace/tailcall.exp: New.
4841 * gdb.btrace/x86-tailcall.S: New.
4842 * gdb.btrace/x86-tailcall.c: New.
4843 * gdb.btrace/unknown_functions.c: New.
4844 * gdb.btrace/unknown_functions.exp: New.
4845 * gdb.btrace/Makefile.in (EXECUTABLES): Add new.
4847 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4849 * gdb.btrace/instruction_history.exp: Update.
4850 * gdb.btrace/function_call_history.exp: Update.
4852 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4854 * gdb.btrace/function_call_history.exp: Fix expected function
4856 * gdb.btrace/instruction_history.exp: Initialize traced.
4857 Remove traced_functions.
4859 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4861 * gdb.btrace/function_call_history.exp: Update
4862 * gdb.btrace/instruction_history.exp: Update.
4864 2014-01-16 Markus Metzger <markus.t.metzger@intel.com>
4866 * gdb.btrace/enable.exp: Update expected text.
4868 2014-01-16 Omair Javaid <Omair.Javaid@linaro.org>
4870 * gdb.dwarf2/dw2-dos-drive.S: Increase text section size to 4
4873 2014-01-15 Maciej W. Rozycki <macro@codesourcery.com>
4875 * gdb.base/float.exp: Handle "aarch64*-*-*" targets.
4877 2014-01-15 Omair Javaid <omair.javaid@linaro.org>
4879 * lib/gdb.exp (supports_process_record): Return true for
4880 arm*-linux*. (supports_reverse): Likewise.
4882 2014-01-13 Siva Chandra Reddy <sivachandra@google.com>
4886 * gdb.python/py-type.c: Enhance test case.
4887 * gdb.python/py-value-cc.cc: Likewise
4888 * gdb.python/py-type.exp: Add new tests.
4889 * gdb.python/py-value-cc.exp: Likewise
4891 2014-01-10 Andreas Arnez <arnez@linux.vnet.ibm.com>
4892 Pedro Alves <palves@redhat.com>
4894 * gdb.dwarf2/dw2-dir-file-name.c (FUNC): Remove "*_start" symbol.
4896 * gdb.dwarf2/dw2-dir-file-name.exp (out_cu, out_line): Replace
4897 references to ${name}_start by references to ${name}.
4899 2014-01-10 Joel Brobecker <brobecker@adacore.com>
4901 * gdb.ada/pp-rec-component.exp: Remove path from "source" test.
4903 2014-01-10 Joel Brobecker <brobecker@adacore.com>
4905 * gdb.python/py-pp-integral.exp: Remove path from "source" test.
4907 2014-01-09 Maciej W. Rozycki <macro@codesourcery.com>
4908 Pedro Alves <palves@redhat.com>
4910 * gdb.mi/mi-info-os.exp: Connect to the target with
4913 2014-01-08 Pedro Alves <palves@redhat.com>
4915 * gdb.threads/reconnect-signal.c: New file.
4916 * gdb.threads/reconnect-signal.exp: New file.
4918 2014-01-07 Jan Kratochvil <jan.kratochvil@redhat.com>
4920 * gdb.base/source-dir.exp: New file.
4922 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4924 * gdb.ada/mi_interface: New testcase.
4926 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4928 * gdb.ada/pp-rec-component.exp, gdb.ada/pp-rec-component.py,
4929 gdb.ada/pp-rec-component/foo.adb, gdb.ada/pp-rec-component/pck.adb,
4930 gdb.ada/pp-rec-component/pck.ads: New files.
4932 2014-01-07 Joel Brobecker <brobecker@adacore.com>
4934 * gdb.python/py-pp-integral.c: New file.
4935 * gdb.python/py-pp-integral.py: New file.
4936 * gdb.python/py-pp-integral.exp: New file.
4938 For older changes see ChangeLog-1993-2013.
4944 ;; version-control: never
4947 Copyright 2014-2015 Free Software Foundation, Inc.
4948 Copying and distribution of this file, with or without modification,
4949 are permitted provided the copyright notice and this notice are preserved.