gdb:
[deliverable/binutils-gdb.git] / gdb / testsuite / gdb.base / call-strs.exp
1 # Copyright 1998, 1999, 2000, 2007, 2008, 2009, 2010
2 # Free Software Foundation, Inc.
3
4 # This program is free software; you can redistribute it and/or modify
5 # it under the terms of the GNU General Public License as published by
6 # the Free Software Foundation; either version 3 of the License, or
7 # (at your option) any later version.
8 #
9 # This program is distributed in the hope that it will be useful,
10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 # GNU General Public License for more details.
13 #
14 # You should have received a copy of the GNU General Public License
15 # along with this program. If not, see <http://www.gnu.org/licenses/>.
16
17 # This file was written by Elena Zannoni (ezannoni@cygnus.com)
18
19 # This test deals with calling functions which have strings as parameters.
20 # it plays around with constant strings.
21 # the corresponding source file is call-strs.c
22 #
23
24 #debug strarg
25
26 if $tracelevel then {
27 strace $tracelevel
28 }
29
30
31 set testfile "call-strs"
32 set srcfile ${testfile}.c
33 set binfile ${objdir}/${subdir}/${testfile}
34
35 # Test depends on printf, which the sparclet stub doesn't support.
36 if { [istarget "sparclet-*-*"] } {
37 return 0;
38 }
39
40 if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug}] != "" } {
41 untested call-strs.exp
42 return -1
43 }
44
45
46
47 # Some targets can't call functions, so don't even bother with this
48 # test.
49 if [target_info exists gdb,cannot_call_functions] {
50 setup_xfail "*-*-*" 2416
51 fail "This target can not call functions"
52 continue
53 }
54
55
56 # Start with a fresh gdb.
57
58 gdb_exit
59 gdb_start
60 gdb_reinitialize_dir $srcdir/$subdir
61 gdb_load ${binfile}
62 gdb_test_no_output "set print sevenbit-strings"
63 gdb_test_no_output "set print address off"
64 gdb_test_no_output "set width 0"
65
66 if ![runto_main] then {
67 perror "couldn't run to breakpoint"
68 continue
69 }
70
71 set prev_timeout $timeout
72 set timeout 120
73
74 #step
75 gdb_test "step" \
76 "strcpy\\(buf, \"test string\"\\);" \
77 "step after assignment to s"
78
79 #next
80 gdb_test "next" \
81 "str_func\\(\"abcd\", \"efgh\", \"ijkl\", \"mnop\", \"qrst\", \"uvwx\", \"yz12\"\\);" \
82 "next over strcpy"
83
84 #print buf
85 gdb_test "print buf" \
86 "\"test string\",.*repeats 88 times.*"
87
88 #print s
89 gdb_test "print s" \
90 " = \"test string\".*"
91
92 #print str_func1(s)
93 if ![gdb_skip_stdio_test "print str_func1(s)"] {
94 gdb_test "print str_func1(s)" \
95 "first string arg is: test string.*\"test string\".*"
96 }
97
98 #print str_func1("test string")
99 if ![gdb_skip_stdio_test "print str_func1(teststring)"] {
100 gdb_test "print str_func1(\"test string\")" \
101 "first string arg is: test string.*\"test string\".*"
102 }
103
104 #call str_func1(s)
105 if ![gdb_skip_stdio_test "call str_func1(s)"] {
106 gdb_test "call str_func1(s)" \
107 "first string arg is: test string.*\"test string\".*"
108 }
109
110 #call str_func1("test string")
111 if ![gdb_skip_stdio_test "call str_func1 (...)"] {
112 gdb_test "call str_func1(\"test string\")" \
113 "first string arg is: test string.*\"test string\".*"
114 }
115
116 #print str_func1(buf)
117 if ![gdb_skip_stdio_test "print str_func1(buf)"] {
118 gdb_test "print str_func1(buf)" \
119 "first string arg is: test string.*\"test string\".*"
120 }
121
122 #call str_func1(buf)
123 if ![gdb_skip_stdio_test "call str_func1(buf)"] {
124 gdb_test "call str_func1(buf)" \
125 "first string arg is: test string.*\"test string\".*"
126 }
127
128 #print str_func("a","b","c","d","e","f","g")
129 if ![gdb_skip_stdio_test "print str_func(a,b,c,d,e,f,g)"] {
130 gdb_test "print str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")" \
131 "first string arg is: a\[ \t\r\n\]+second string arg is: b\[ \t\r\n\]+third string arg is: c\[ \t\r\n\]+fourth string arg is: d\[ \t\r\n\]+fifth string arg is: e\[ \t\r\n\]+sixth string arg is: f\[ \t\r\n\]+seventh string arg is: g\[ \t\r\n\]+.*= \"abcdefg\".*"
132 }
133
134 #call str_func("a","b","c","d","e","f","g")
135 if ![gdb_skip_stdio_test "call str_func(a,b,c,d,e,f,g)"] {
136 gdb_test "call str_func(\"a\",\"b\",\"c\",\"d\",\"e\",\"f\",\"g\")" \
137 "first string arg is: a\[ \t\r\n\]+second string arg is: b\[ \t\r\n\]+third string arg is: c\[ \t\r\n\]+fourth string arg is: d\[ \t\r\n\]+fifth string arg is: e\[ \t\r\n\]+sixth string arg is: f\[ \t\r\n\]+seventh string arg is: g\[ \t\r\n\]+.*= \"abcdefg\".*"
138 }
139
140 #print str_func(s,s,s,s,s,s,s)
141 if ![gdb_skip_stdio_test "print str_func(s,s,s,s,s,s,s,s)"] {
142 gdb_test "print str_func(s,s,s,s,s,s,s)" \
143 "first string arg is: test string\[ \t\r\n\]+second string arg is: test string\[ \t\r\n\]+third string arg is: test string\[ \t\r\n\]+fourth string arg is: test string\[ \t\r\n\]+fifth string arg is: test string\[ \t\r\n\]+sixth string arg is: test string\[ \t\r\n\]+seventh string arg is: test string\[ \t\r\n\]+.*\"test stringtest stringtest stringtest stringtest stringtest stringtest string\".*"
144 }
145
146 #call str_func(s,s,s,s,s,s,s)
147 if ![gdb_skip_stdio_test "call str_func(s,s,s,s,s,s,s,s)"] {
148 gdb_test "call str_func(s,s,s,s,s,s,s)" \
149 "first string arg is: test string\[ \t\r\n\]+second string arg is: test string\[ \t\r\n\]+third string arg is: test string\[ \t\r\n\]+fourth string arg is: test string\[ \t\r\n\]+fifth string arg is: test string\[ \t\r\n\]+sixth string arg is: test string\[ \t\r\n\]+seventh string arg is: test string\[ \t\r\n\]+.*\"test stringtest stringtest stringtest stringtest stringtest stringtest string\".*"
150 }
151
152 gdb_exit
153
154 set timeout $prev_timeout
155
This page took 0.035317 seconds and 4 git commands to generate.