1 # Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1997, 1998, 1999, 2000,
2 # 2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010, 2011
3 # Free Software Foundation, Inc.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
23 # test special commands (if, while, etc)
26 if { [prepare_for_testing commands.exp commands run.c {debug additional_flags=-DFAKEARGV}] } {
30 proc gdbvar_simple_if_test {} {
33 gdb_test_no_output "set \$foo = 0" "set foo in gdbvar_simple_if_test"
34 # All this test should do is print 0xdeadbeef once.
35 gdb_test "if \$foo == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
36 "\\\$\[0-9\]* = 0xdeadbeef" "gdbvar_simple_if_test #1"
37 # All this test should do is print 0xfeedface once.
38 gdb_test "if \$foo == 0\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
39 "\\\$\[0-9\]* = 0xfeedface" "gdbvar_simple_if_test #2"
42 proc gdbvar_simple_while_test {} {
45 gdb_test_no_output "set \$foo = 5" "set foo in gdbvar_simple_while_test"
46 # This test should print 0xfeedface five times.
47 gdb_test "while \$foo > 0\np/x 0xfeedface\nset \$foo -= 1\nend" \
48 "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
49 "gdbvar_simple_while_test #1"
52 proc gdbvar_complex_if_while_test {} {
55 gdb_test_no_output "set \$foo = 4" \
56 "set foo in gdbvar complex_if_while_test"
57 # This test should alternate between 0xdeadbeef and 0xfeedface two times.
58 gdb_test "while \$foo > 0\nset \$foo -= 1\nif \(\$foo % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \
59 "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
60 "gdbvar_complex_if_while_test #1"
63 proc progvar_simple_if_test {} {
66 if [target_info exists noargs] {
67 verbose "Skipping progvar_simple_if_test because of noargs."
71 if { ![runto factorial] } then { gdb_suppress_tests; }
72 # Don't depend upon argument passing, since most simulators don't
73 # currently support it. Bash value variable to be what we want.
74 gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test #1"
75 # All this test should do is print 0xdeadbeef once.
76 gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
77 "\\\$\[0-9\]* = 0xdeadbeef" \
78 "progvar_simple_if_test #1"
79 # All this test should do is print 0xfeedface once.
80 gdb_test "if value == 5\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
81 "\\\$\[0-9\]* = 0xfeedface" \
82 "progvar_simple_if_test #2"
83 gdb_stop_suppressing_tests;
86 proc progvar_simple_while_test {} {
89 if [target_info exists noargs] {
90 verbose "Skipping progvar_simple_while_test because of noargs."
94 gdb_test_no_output "set args 5" "set args in progvar_simple_while_test"
95 if { ![runto factorial] } then { gdb_suppress_tests }
96 # Don't depend upon argument passing, since most simulators don't
97 # currently support it. Bash value variable to be what we want.
98 gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test #2"
99 # This test should print 0xfeedface five times.
100 gdb_test "while value > 0\np/x 0xfeedface\nset value -= 1\nend" \
101 "\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
102 "progvar_simple_while_test #1"
103 gdb_stop_suppressing_tests;
106 proc progvar_complex_if_while_test {} {
109 if [target_info exists noargs] {
110 verbose "Skipping progvar_simple_if_while_test because of noargs."
114 gdb_test_no_output "set args 4" \
115 "set args in progvar_complex_if_while_test"
116 if { ![runto factorial] } then { gdb_suppress_tests }
117 # Don't depend upon argument passing, since most simulators don't
118 # currently support it. Bash value variable to be what we want.
119 gdb_test "p value=4" ".*" "set value to 4 in progvar_simple_if_test"
120 # This test should alternate between 0xdeadbeef and 0xfeedface two times.
121 gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend" \
122 "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
123 "progvar_complex_if_while_test #1"
124 gdb_stop_suppressing_tests;
127 proc if_while_breakpoint_command_test {} {
128 if [target_info exists noargs] {
129 verbose "Skipping if_while_breakpoint_command_test because of noargs."
133 gdb_test_no_output "set args 5" \
134 "set args in if_while_breakpoint_command_test"
135 if { ![runto factorial] } then { gdb_suppress_tests }
136 # Don't depend upon argument passing, since most simulators don't
137 # currently support it. Bash value variable to be what we want.
138 gdb_test "p value=5" ".*" "set value to 5 in progvar_simple_if_test"
140 gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #1"
142 gdb_test_multiple "commands" \
143 "commands in if_while_breakpoint_command_test" {
145 pass "commands in if_while_breakpoint_command_test"
149 # This test should alternate between 0xdeadbeef and 0xfeedface two times.
150 gdb_test "while value > 0\nset value -= 1\nif \(value % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \
152 "commands part 2 in if_while_breakpoint_command_test"
153 gdb_test "continue" \
154 "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
155 "if_while_breakpoint_command_test #1"
156 gdb_test "info break" \
157 "while.*set.*if.*p/x.*else.*p/x.*end.*" \
158 "info break in if_while_breakpoint_command_test"
159 gdb_stop_suppressing_tests;
162 # Test that we can run the inferior from breakpoint commands.
164 # The expected behavior is that all commands after the first "step"
165 # shall be ignored. See the gdb manual, "Break Commands",
166 # subsection "Breakpoint command lists".
168 proc infrun_breakpoint_command_test {} {
169 if [target_info exists noargs] {
170 verbose "Skipping infrun_breakpoint_command_test because of noargs."
174 gdb_test_no_output "set args 6" \
175 "set args in infrun_breakpoint_command_test"
176 if { ![runto factorial] } then { gdb_suppress_tests }
177 # Don't depend upon argument passing, since most simulators don't
178 # currently support it. Bash value variable to be what we want.
179 gdb_test "p value=6" ".*" "set value to 6 in progvar_simple_if_test #1"
181 gdb_test "break factorial if value == 5" "Breakpoint.*at.*"
183 # infrun_breakpoint_command_test - This test was broken into two parts
184 # to get around a synchronization problem in expect.
185 # part1: issue the gdb command "commands"
186 # part2: send the list of commands
187 gdb_test_multiple "commands" \
188 "commands in infrun_breakpoint_command_test #1" {
190 pass "commands in infrun_breakpoint_command_test #1"
193 gdb_test "step\nstep\nstep\nstep\nend" "" \
194 "commands in infrun_breakpoint_command_test #2"
196 gdb_test "continue" \
197 "Continuing.*.*.*Breakpoint \[0-9\]*, factorial \\(value=5\\).*at.*\[0-9\]*\[ \]*if \\(value > 1\\) \{.*\[0-9\]*\[ \]*value \\*= factorial \\(value - 1\\);.*" \
198 "continue in infrun_breakpoint_command_test"
200 gdb_stop_suppressing_tests;
203 proc breakpoint_command_test {} {
204 if [target_info exists noargs] {
205 verbose "Skipping breakpoint_command_test because of noargs."
209 gdb_test_no_output "set args 6" "set args in breakpoint_command_test"
210 if { ![runto factorial] } then { gdb_suppress_tests; }
211 # Don't depend upon argument passing, since most simulators don't
212 # currently support it. Bash value variable to be what we want.
213 gdb_test "p value=6" ".*" "set value to 6 in progvar_simple_if_test #2"
215 gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #2"
216 gdb_test "commands\nprintf \"Now the value is %d\\n\", value\nend" \
217 "End with.*" "commands in breakpoint_command_test"
218 gdb_test "continue" \
219 "Breakpoint \[0-9\]*, factorial.*Now the value is 5" \
220 "continue in breakpoint_command_test"
221 gdb_test "print value" " = 5" "print value in breakpoint_command_test"
222 gdb_stop_suppressing_tests;
225 # Test a simple user defined command (with arguments)
226 proc user_defined_command_test {} {
229 gdb_test_no_output "set \$foo = 4" \
230 "set foo in user_defined_command_test"
232 gdb_test_multiple "define mycommand" \
233 "define mycommand in user_defined_command_test" {
235 pass "define mycommand in user_defined_command_test"
239 # This test should alternate between 0xdeadbeef and 0xfeedface two times.
240 gdb_test "while \$arg0 > 0\nset \$arg0 -= 1\nif \(\$arg0 % 2\) == 1\np/x 0xdeadbeef\nelse\np/x 0xfeedface\nend\nend\nend" \
242 "enter commands in user_defined_command_test"
244 gdb_test "mycommand \$foo" \
245 "\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface\[^\n\]*\n\\\$\[0-9\]* = 0xdeadbeef\[^\n\]*\n\\\$\[0-9\]* = 0xfeedface" \
246 "execute user defined command in user_defined_command_test"
247 gdb_test "show user mycommand" \
248 " while \\\$arg0.*set.* if \\\(\\\$arg0.*p/x.* else\[^\n\].*p/x.* end\[^\n\].* end\[^\n\].*" \
249 "display user command in user_defined_command_test"
252 proc watchpoint_command_test {} {
256 if [target_info exists noargs] {
257 verbose "Skipping watchpoint_command_test because of noargs."
261 # Disable hardware watchpoints if necessary.
262 if [target_info exists gdb,no_hardware_watchpoints] {
263 gdb_test_no_output "set can-use-hw-watchpoints 0" ""
266 gdb_test_no_output "set args 6" "set args in watchpoint_command_test"
267 if { ![runto factorial] } then { return }
270 # Verify that we can create a watchpoint, and give it a commands
271 # list that continues the inferior. We set the watchpoint on a
272 # local variable, too, so that it self-deletes when the watched
273 # data goes out of scope.
275 # What should happen is: Each time the watchpoint triggers, it
276 # continues the inferior. Eventually, the watchpoint will self-
277 # delete, when the watched variable is out of scope. But by that
278 # time, the inferior should have exited. GDB shouldn't crash or
279 # anything untoward as a result of this.
283 gdb_test_multiple "watch local_var" "watch local_var" {
284 -re "\[Ww\]atchpoint (\[0-9\]*): local_var.*$gdb_prompt $" {
285 set wp_id $expect_out(1,string)
286 pass "watch local_var"
290 if {$wp_id == -1} {return}
292 gdb_test_multiple "commands $wp_id" "begin commands on watch" {
293 -re "Type commands for breakpoint.*, one per line.*>$" {
294 pass "begin commands on watch"
297 # See the 'No symbol "value...' fail below. This command will
298 # fail if it's executed in the wrong frame. If adjusting the
299 # test, make sure this property holds.
300 gdb_test_multiple "print value" "add print command to watch" {
302 pass "add print command to watch"
305 gdb_test_multiple "continue" "add continue command to watch" {
307 pass "add continue command to watch"
312 "end commands on watch"
314 set test "continue with watch"
315 gdb_test_multiple "continue" "$test" {
316 -re "No symbol \"value\" in current context.\r\n$gdb_prompt $" {
317 # Happens if GDB actually runs the watchpoints commands,
318 # even though the watchpoint was deleted for not being in
322 -re "Continuing.*\[Ww\]atchpoint $wp_id deleted because the program has left the block in.*which its expression is valid.*run.c:(57|82).*$gdb_prompt $" {
328 proc test_command_prompt_position {} {
331 if [target_info exists noargs] {
332 verbose "Skipping test_command_prompt_position because of noargs."
336 if { ![runto factorial] } then { gdb_suppress_tests; }
337 # Don't depend upon argument passing, since most simulators don't
338 # currently support it. Bash value variable to be what we want.
340 gdb_test "break factorial" "Breakpoint.*at.*" "break factorial #3"
341 gdb_test "p value=5" ".*" "set value to 5 in test_command_prompt_position"
342 # All this test should do is print 0xdeadbeef once.
343 gdb_test "if value == 1\np/x 0xfeedface\nelse\np/x 0xdeadbeef\nend" \
344 "\\\$\[0-9\]* = 0xdeadbeef" \
345 "if test in test_command_prompt_position"
347 # Now let's test for the correct position of the '>' in gdb's
348 # prompt for commands. It should be at the beginning of the line,
349 # and not after one space.
351 send_gdb "commands\n"
353 -re "Type commands.*End with.*\[\r\n\]>$" {
354 send_gdb "printf \"Now the value is %d\\n\", value\n"
356 -re "^printf.*value\r\n>$" {
359 -re "^end\r\n$gdb_prompt $" {
360 pass "> OK in test_command_prompt_position"
362 -re ".*$gdb_prompt $" {
363 fail "some other message in test_command_prompt_position"
366 fail "(timeout) 1 in test_command_prompt_position"
370 -re "^ >$" { fail "> not OK in test_command_prompt_position" }
371 -re ".*$gdb_prompt $" {
372 fail "wrong message in test_command_prompt_position"
375 fail "(timeout) 2 in test_command_prompt_position "
379 -re "Type commands.*End with.*\[\r\n\] >$" {
380 fail "prompt not OK in test_command_prompt_position"
382 -re ".*$gdb_prompt $" {
383 fail "commands in test_command_prompt_position"
385 timeout { fail "(timeout) 3 commands in test_command_prompt_position" }
388 gdb_stop_suppressing_tests;
393 proc deprecated_command_test {} {
394 gdb_test "maintenance deprecate blah" "Can't find command.*" \
395 "tried to deprecate non-existing command"
397 gdb_test_no_output "maintenance deprecate p \"new_p\"" "maintenance deprecate p \"new_p\" /1/"
399 "Warning: 'p', an alias for the command 'print' is deprecated.*Use 'new_p'.*" \
400 "p deprecated warning, with replacement"
401 gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /1/"
403 gdb_test_no_output "maintenance deprecate p \"new_p\"" "maintenance deprecate p \"new_p\" /2/"
404 gdb_test_no_output "maintenance deprecate print \"new_print\""
406 "Warning: command 'print' \\(p\\) is deprecated.*Use 'new_print'.*" \
407 "both alias and command are deprecated"
408 gdb_test "p 5" ".\[0-9\]* = 5.*" "Deprecated warning goes away /2/"
410 gdb_test_no_output "maintenance deprecate set remote memory-read-packet-size \"srm\" " \
411 "deprecate long command /1/"
412 gdb_test "set remote memory-read-packet-size" \
413 "Warning: command 'set remote memory-read-packet-size' is deprecated.*Use 'srm'.*" \
414 "long command deprecated /1/"
416 gdb_test_no_output "maintenance deprecate set remote memory-read-packet-size" \
417 "deprecate long command /2/"
418 gdb_test "set remote memory-read-packet-size" \
419 "Warning: command 'set remote memory-read-packet-size' is deprecated.*No alternative known.*" \
420 "long command deprecated with no alternative /2/"
422 gdb_test "maintenance deprecate" \
423 "\"maintenance deprecate\".*" \
424 "deprecate with no arguments"
427 proc bp_deleted_in_command_test {} {
430 if [target_info exists noargs] {
431 verbose "Skipping bp_deleted_in_command_test because of noargs."
435 gdb_test_no_output "set args 1" \
436 "set args in bp_deleted_in_command_test"
439 # Create a breakpoint, and associate a command-list to it, with
440 # one command that deletes this breakpoint.
441 gdb_test "break factorial" \
442 "Breakpoint \[0-9\]+ at .*: file .*run.c, line \[0-9\]+\." \
443 "breakpoint in bp_deleted_in_command_test"
445 gdb_test_multiple "commands" "begin commands in bp_deleted_in_command_test" {
446 -re "Type commands for breakpoint.*>$" {
447 pass "begin commands in bp_deleted_in_command_test"
450 gdb_test_multiple "silent" "add silent command" {
452 pass "add silent command"
455 gdb_test_multiple "clear factorial" "add clear command" {
457 pass "add clear command"
460 gdb_test_multiple "printf \"factorial command-list executed\\n\"" \
461 "add printf command" {
463 pass "add printf command"
466 gdb_test_multiple "cont" "add cont command" {
468 pass "add cont command"
477 -re ".*factorial command-list executed.*$gdb_prompt $" {
478 pass "run factorial until breakpoint"
480 -re ".*$gdb_prompt $" {
481 fail "run factorial until breakpoint"
483 default { fail "(timeout) run factorial until breakpoint" }
484 timeout { fail "(timeout) run factorial until breakpoint" }
488 proc temporary_breakpoint_commands {} {
491 if [target_info exists noargs] {
492 verbose "Skipping temporary_breakpoint_commands because of noargs."
496 gdb_test_no_output "set args 1" \
497 "set args in temporary_breakpoint_commands"
500 # Create a temporary breakpoint, and associate a commands list to it.
501 # This test will verify that this commands list is executed when the
503 gdb_test "tbreak factorial" \
504 "Temporary breakpoint \[0-9\]+ at .*: file .*run.c, line \[0-9\]+\." \
505 "breakpoint in temporary_breakpoint_commands"
507 gdb_test_multiple "commands" \
508 "begin commands in bp_deleted_in_command_test" {
509 -re "Type commands for breakpoint.*>$" {
510 pass "begin commands in bp_deleted_in_command_test"
513 gdb_test_multiple "silent" "add silent tbreak command" {
515 pass "add silent tbreak command"
518 gdb_test_multiple "printf \"factorial tbreak commands executed\\n\"" \
519 "add printf tbreak command" {
521 pass "add printf tbreak command"
524 gdb_test_multiple "cont" "add cont tbreak command" {
526 pass "add cont tbreak command"
531 "end tbreak commands"
535 -re ".*factorial tbreak commands executed.*$gdb_prompt $" {
536 pass "run factorial until temporary breakpoint"
538 timeout { fail "(timeout) run factorial until temporary breakpoint" }
542 # Test that GDB can handle $arg0 outside of user functions without
544 proc stray_arg0_test { } {
545 gdb_test "print \$arg0" \
546 "\\\$\[0-9\]* = void" \
549 gdb_test "if 1 == 1\nprint \$arg0\nend" \
550 "\\\$\[0-9\]* = void" \
553 gdb_test "print \$arg0 = 1" \
557 gdb_test "print \$arg0" \
562 # Test that GDB is able to source a file with an indented comment.
563 proc source_file_with_indented_comment {} {
564 set fd [open "file1" w]
572 gdb_test "source file1" "Done!" "source file with indented comment"
575 # Test that GDB can handle arguments when sourcing files recursively.
576 # If the arguments are overwritten with ####### then the test has failed.
577 proc recursive_source_test {} {
578 set fd [open "file1" w]
584 set fd [open "file2" w]
587 echo 1: <<<$arg0>>>\n
589 echo 2: <<<$arg0>>>\n
593 set fd [open "file3" w]
596 #################################################################"
599 gdb_test "source file1" \
600 "1: <<<qwerty>>>\[\r\n]+in file3\[\r\n]+2: <<<qwerty>>>" \
601 "recursive source test"
608 proc gdb_test_no_prompt { command result msg } {
611 set msg "$command - $msg"
612 set result "^[string_to_regexp $command]\r\n$result$"
613 gdb_test_multiple $command $msg {
626 proc if_commands_test {} {
629 gdb_test_no_output "set \$tem = 1" "set \$tem in if_commands_test"
631 set test "if_commands_test 1"
632 gdb_test_no_prompt "if \$tem == 2" { >} $test
633 gdb_test_no_prompt "break main" { >} $test
634 gdb_test_no_prompt "else" { >} $test
635 gdb_test_no_prompt "break factorial" { >} $test
636 gdb_test_no_prompt "commands" { >} $test
637 gdb_test_no_prompt "silent" { >} $test
638 gdb_test_no_prompt "set \$tem = 3" { >} $test
639 gdb_test_no_prompt "continue" { >} $test
640 gdb_test_multiple "end" "first end - $test" {
642 pass "first end - $test"
645 fail "first end - $test"
648 gdb_test_multiple "end" "second end - $test" {
649 -re "Breakpoint \[0-9\]+ at .*: file .*run.c, line \[0-9\]+\.\r\n$gdb_prompt $" {
650 pass "second end - $test"
652 -re "Undefined command: \"silent\".*$gdb_prompt $" {
653 fail "second end - $test"
657 set test "if_commands_test 2"
658 gdb_test_no_prompt "if \$tem == 1" { >} $test
659 gdb_test_no_prompt "break main" { >} $test
660 gdb_test_no_prompt "else" { >} $test
661 gdb_test_no_prompt "break factorial" { >} $test
662 gdb_test_no_prompt "commands" { >} $test
663 gdb_test_no_prompt "silent" { >} $test
664 gdb_test_no_prompt "set \$tem = 3" { >} $test
665 gdb_test_no_prompt "continue" { >} $test
666 gdb_test_multiple "end" "first end - $test" {
668 pass "first end - $test"
671 fail "first end - $test"
674 gdb_test_multiple "end" "second end - $test" {
675 -re "Breakpoint \[0-9\]+ at .*: file .*run.c, line \[0-9\]+\.\r\n$gdb_prompt $" {
676 pass "second end - $test"
681 proc redefine_hook_test {} {
684 gdb_test "define one\nend" \
688 gdb_test "define hook-one\necho hibob\\n\nend" \
692 gdb_test_multiple "define one" "redefine one" {
693 -re "Redefine command .one.. .y or n. $" {
699 pass "define one in redefine_hook_test"
702 fail "(timeout or eof) define one in redefine_hook_test"
708 "enter commands for one redefinition in redefine_hook_test"
712 "execute one command in redefine_hook_test"
715 proc redefine_backtrace_test {} {
718 gdb_test_multiple "define backtrace" "define backtrace" {
719 -re "Really redefine built-in command \"backtrace\"\\? \\(y or n\\) $" {
720 pass "define backtrace"
724 gdb_test_multiple "y" "expect response to define backtrace" {
725 -re "End with a line saying just \"end\"\\.\r\n>$" {
726 pass "expect response to define backtrace"
730 gdb_test "echo hibob\\n\nend" \
732 "enter commands in redefine_backtrace_test"
734 gdb_test "backtrace" \
736 "execute backtrace command in redefine_backtrace_test"
739 "execute bt command in redefine_backtrace_test"
742 gdbvar_simple_if_test
743 gdbvar_simple_while_test
744 gdbvar_complex_if_while_test
745 progvar_simple_if_test
746 progvar_simple_while_test
747 progvar_complex_if_while_test
748 if_while_breakpoint_command_test
749 infrun_breakpoint_command_test
750 breakpoint_command_test
751 user_defined_command_test
752 watchpoint_command_test
753 test_command_prompt_position
754 deprecated_command_test
755 bp_deleted_in_command_test
756 temporary_breakpoint_commands
758 source_file_with_indented_comment
759 recursive_source_test
762 # This one should come last, as it redefines "backtrace".
763 redefine_backtrace_test