1 # Copyright 1988, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998, 1999,
2 # 2000, 2001, 2002, 2003, 2005, 2006, 2007, 2008, 2009, 2010
3 # Free Software Foundation, Inc.
5 # This program is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 3 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
18 # Start with a fresh gdb
23 set prev_timeout $timeout
27 # test default actions of gdb commands
32 gdb_test "add-symbol-file" "add-symbol-file takes a file name and an address" "add-symbol-file"
35 gdb_test "append" "\"append\" must be followed by a subcommand\.\[\r\n\]+List of append subcommands:.*"
36 gdb_test "append binary" "\"append binary\" must be followed by a subcommand\.\[\r\n\]+List of append binary subcommands:.*"
37 gdb_test "append memory" "Missing filename\."
38 gdb_test "append value" "Missing filename\."
39 gdb_test "append binary memory" "Missing filename\."
40 gdb_test "append binary value" "Missing filename\."
42 setup_xfail "mips-idt-*"
45 -re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
47 -re "You can't do that when your target is `None'.*$gdb_prompt $"\
49 -re "You can't do that without a process to debug.*$gdb_prompt $"\
51 -re "Don't know how to attach. Try \"help target\"..*$gdb_prompt $"\
53 -re "Kill it. .y or n." {
57 -re "$gdb_prompt $" { fail "attach" }
58 timeout { fail "(timeout) attach" }
61 if ![target_info exists use_gdb_stub] {
62 gdb_test "break" "No default breakpoint address now." "break"
63 foreach i "b br bre brea" {
64 gdb_test $i "No default breakpoint address now." "break \"$i\" abbreviation"
68 setup_xfail "mips-idt-*"
69 gdb_test "backtrace" "No stack."
71 # ba and bac are no longer unique command prefixes. So these tests
72 # elict an error from GDB.
73 # GDB needs to be fixed to map unique alias here for ba bac.
75 foreach i "bt ba bac" {
76 setup_xfail "mips-idt-*"
77 gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
80 warning "Skipping backtrace and break tests because of GDB stub."
83 # This works on the MIPS IDT board, but confuses future tests.
84 if ![istarget "mips-idt-*"] then {
85 gdb_test "continue" "The program is not being run." "continue"
86 gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
90 gdb_test "call" "The history is empty..*" "call"
94 gdb_test "catch" "Catch requires an event name..*" "catch"
97 gdb_test "cd" "Argument required .new working directory.*" "cd"
100 gdb_test "clear" "No source file specified..*" "clear"
103 gdb_test "commands" "Argument required .one or more breakpoint numbers...*" "commands"
106 gdb_test "condition" "Argument required .breakpoint number.*" "condition"
109 gdb_test "core-file" "No core file now.|GDB can't read core files on this machine." "core-file"
110 #test delete "d" abbreviation
111 gdb_test "d" "" "delete \"d\" abbreviation"
113 gdb_test "delete" "" "delete"
115 gdb_test "define" "Argument required \[(\]name of command to define\[)\]." "define"
116 #test delete breakpoints
117 gdb_test "delete breakpoints" "" "delete breakpoints"
119 # FIXME -- need to dump full output to detailed log
120 send_gdb "delete display\n"
122 -re "Delete all auto-display expressions.*y or n. $" {
125 -re "$gdb_prompt $" { pass "delete display prompt" }
126 timeout { fail "(timeout) delete display prompt" }
129 timeout { fail "(timeout) delete display prompt" }
134 gdb_test "detach" "" "detach"
136 if [istarget "h8300-*-hms"] then {
142 # FIXME -- need to dump full output to detailed log
144 send_gdb "directory\n"
146 -re "Reinitialize source path to empty.*y or n. $" {
149 -re "Source directories searched: .cdir\[:;\].cwd.*$gdb_prompt $"\
150 { pass "directory prompt" }
151 timeout { fail "(timeout) directory prompt" }
156 #test disable "dis" abbreviation
157 gdb_test "dis" "" "disable \"dis\" abbreviation"
158 #test disable "disa" abbreviation
159 gdb_test "disa" "" "disable \"disa\" abbreviation"
161 gdb_test "disable" "" "disable"
162 #test disable breakpoints
163 gdb_test "disable breakpoints" "" "disable breakpoints"
164 #test disable display
165 gdb_test "disable display" "" "disable display"
167 gdb_test "disassemble" "No frame selected." "disassemble"
169 gdb_test "display" "" "display"
171 gdb_test "do" "No stack." "do"
173 gdb_test "document" "Argument required .name of command to define.*" "document"
175 gdb_test "down" "No stack.*" "down"
177 gdb_test "down-silently" "No stack." "down-silently"
179 gdb_test "dump" "\"dump\" must be followed by a subcommand\.\[\r\n\]+List of dump subcommands:.*"
180 gdb_test "dump binary" "\"dump binary\" must be followed by a subcommand\.\[\r\n\]+List of dump binary subcommands:.*"
181 gdb_test "dump ihex" "\"dump ihex\" must be followed by a subcommand\.\[\r\n\]+List of dump ihex subcommands:.*"
182 gdb_test "dump memory" "Missing filename\."
183 gdb_test "dump srec" "\"dump srec\" must be followed by a subcommand\.\[\r\n\]+List of dump srec subcommands:.*"
184 gdb_test "dump tekhex" "\"dump tekhex\" must be followed by a subcommand\.\[\r\n\]+List of dump tekhex subcommands:.*"
185 gdb_test "dump value" "Missing filename\."
186 gdb_test "dump binary memory" "Missing filename\."
187 gdb_test "dump binary value" "Missing filename\."
188 gdb_test "dump ihex memory" "Missing filename\."
189 gdb_test "dump ihex value" "Missing filename\."
190 gdb_test "dump srec memory" "Missing filename\."
191 gdb_test "dump srec value" "Missing filename\."
192 gdb_test "dump tekhex memory" "Missing filename\."
193 gdb_test "dump tekhex value" "Missing filename\."
195 gdb_test "echo" "" "echo"
196 #test enable breakpoints delete
197 gdb_test "enable breakpoints delete" "Argument required .one or more breakpoint numbers.*" "enable breakpoints delete"
198 #test enable breakpoints once
199 gdb_test "enable breakpoints once" "Argument required .one or more breakpoint numbers.*" "enable breakpoints once"
200 #test enable breakpoints
201 gdb_test "enable breakpoints" "" "enable breakpoints"
203 gdb_test "enable delete" "Argument required .one or more breakpoint numbers.*" "enable delete"
205 gdb_test "enable display" "" "enable display"
207 gdb_test "enable once" "Argument required .one or more breakpoint numbers.*" "enable once"
209 gdb_test "enable" "" "enable"
211 send_gdb "exec-file\n"
213 -re "No executable file now..*$gdb_prompt $" {
216 -re "exec-file.*A program is being debugged already. Kill it. .y or n.*$" {
219 send_user "\tDidn't kill program being debugged\n"
221 gdb_expect -re "$gdb_prompt $" { }
224 -re "$gdb_prompt $" { fail "exec-file" }
225 timeout { fail "(timeout) exec-file" }
228 #test frame "f" abbreviation
229 gdb_test "f" "No stack." "frame \"f\" abbreviation"
231 gdb_test "frame" "No stack." "frame"
233 gdb_test "fg" "The program is not being run." "fg"
234 # FIXME: fg kills the udi connection
238 -re "No executable file now..*$gdb_prompt $"\
240 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
243 send_user "\t\tDidn't kill program being debugged\n"
245 gdb_expect -re "$gdb_prompt $" { }
248 -re ".*$gdb_prompt $" { fail "file" }
249 timeout { fail "(timeout) file" }
253 gdb_test "finish" "The program is not being run." "finish"
255 # The message here comes from the regexp library, not gdb, and so can
256 # vary on different systems.
257 gdb_test "forward-search" "No previous regular expression.*|There is no previous regular expression.*" "forward-search"
261 -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
264 -re "Undefined command: .*$gdb_prompt $" {
267 default { fail "gcore" }
269 send_gdb "generate-core-file\n"
271 -re "You can\'t do that without a process to debug.*$gdb_prompt $" {
272 pass "generate-core-file"
274 -re "Undefined command: .*$gdb_prompt $" {
275 pass "generate-core-file"
277 default { fail "generate-core-file" }
279 #test help "h" abbreviation
280 gdb_test "h" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help \"h\" abbreviation"
282 gdb_test "help" "List of classes of commands:(\[^\r\n\]*\[\r\n\])+aliases -- Aliases of other commands(\[^\r\n\]*\[\r\n\])+breakpoints -- Making program stop at certain points(\[^\r\n\]*\[\r\n\])+data -- Examining data(\[^\r\n\]*\[\r\n\])+files -- Specifying and examining files(\[^\r\n\]*\[\r\n\])+obscure -- Obscure features(\[^\r\n\]*\[\r\n\])+running -- Running the program(\[^\r\n\]*\[\r\n\])+stack -- Examining the stack(\[^\r\n\]*\[\r\n\])+status -- Status inquiries(\[^\r\n\]*\[\r\n\])+support -- Support facilities(\[^\r\n\]*\[\r\n\])+user-defined -- User-defined commands(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by a class name for a list of commands in that class.(\[^\r\n\]*\[\r\n\])+Type \"help\" followed by command name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "help"
284 gdb_test "handle" "Argument required .signal to handle.*" "handle"
285 #test info "i" abbreviation
286 gdb_test "i" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info \"i\" abbreviation"
288 gdb_test "info" "\"info\" must be followed by the name of an info command.(\[^\r\n\]*\[\r\n\])+List of info subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help info\" followed by info subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "info"
290 gdb_test "ignore" "Argument required .a breakpoint number.*" "ignore"
292 gdb_test "info address" "Argument required." "info address"
293 #test info all-registers
294 gdb_test "info all-registers" "The program has no registers now." "info all-registers"
296 gdb_test "info args" "No frame selected." "info args"
297 #test info bogus-gdb-command
298 gdb_test "info bogus-gdb-command" "Undefined info command: \"bogus-gdb-command\". Try \"help info\".*" "info bogus-gdb-command"
299 #test info breakpoints
300 gdb_test "info breakpoints" "No breakpoints or watchpoints." "info breakpoints"
302 gdb_test "info catch" "No frame selected." "info catch"
304 # FIXME -- doesn't work worth a shit
305 #send_gdb "info copying"
306 # -re "GNU GENERAL PUBLIC LICENSE.*#of preserving the free status of all derivatives of our free software and.*#of promoting the sharing and reuse of software generally."#
307 gdb_test "info copying"
312 gdb_test "info display" "There are no auto-display expressions now." "info display"
313 #test info frame "f" abbreviation
314 gdb_test "info f" "No stack.*|No selected frame.*" "info frame \"f\" abbreviation"
316 gdb_test "info frame" "No stack.|No selected frame." "info frame"
318 gdb_test "info files" "" "info files"
320 gdb_test "info float" "The program has no registers now." "info float"
322 gdb_test "info functions" "All defined functions:" "info functions"
324 gdb_test "info locals" "No frame selected." "info locals"
326 gdb_test "info program" "The program being debugged is not being run." "info program"
328 gdb_test "info registers" "The program has no registers now." "info registers"
329 #test info stack "s" abbreviation
330 gdb_test "info s" "No stack." "info stack \"s\" abbreviation"
332 gdb_test "info stack" "No stack." "info stack"
334 # FIXME -- needs to match the entire output
335 # FIXME -- on native solaris 2.8, this test fails due to this line:
336 # prompt: Gdb's prompt is "(gdb) ".^M
337 gdb_test "info set" "confirm: Whether to confirm potentially dangerous operations is o\[a-z\]*.(\[^\r\n\]*\[\r\n\])+history filename: The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+listsize: Number of source lines gdb will list by default is 10.*" "info set"
338 gdb_test "info symbol" "Argument required .address.."
340 gdb_test "info source" "No current source file..*" "info source"
342 gdb_test "info sources" "No symbol table is loaded. Use the \"file\" command.*" "info sources"
344 gdb_test "info target" "" "info target"
346 gdb_test "info terminal" "No saved terminal information." "info terminal"
348 gdb_test "info types" "All defined types:" "info types"
350 gdb_test "info variables" "All defined variables:" "info variables"
352 gdb_test "info vector" "The program has no registers now." "info vector"
354 gdb_test "info warranty" "15. *Disclaimer of Warranty.*" "info warranty"
355 #test info watchpoints
356 gdb_test "info watchpoints" "No breakpoints or watchpoints." "info watchpoints"
358 gdb_test "inspect" "The history is empty." "inspect"
360 gdb_test "jump" "The program is not being run." "jump"
362 gdb_test "kill" "The program is not being run." "kill"
363 #test list "l" abbreviation
364 gdb_test "l" "No symbol table is loaded. Use the \"file\" command.*" "list \"l\" abbreviation"
366 gdb_test "list" "No symbol table is loaded. Use the \"file\" command.*" "list"
368 # The ``takes a file name'' case is for vxgdb.
369 # The ``Use the "file" command'' case is for newer GDB versions which try
370 # to deduce the filename from the exec file.
371 gdb_test "load" "You can't do that when your target is `None'.*|The load command takes a file name.*|Must specify at least a file name with the load command.*|.*Use the .file. or .exec-file. command.*" "load"
372 #test next "n" abbreviation
373 gdb_test "n" "The program is not being run." "next \"n\" abbreviation"
375 gdb_test "next" "The program is not being run." "next"
376 #test nexti "ni" abbreviation
377 gdb_test "ni" "The program is not being run." "nexti \"ni\" abbreviation"
379 gdb_test "nexti" "The program is not being run." "nexti"
381 gdb_test "output" "Argument required .expression to compute.*" "output"
384 gdb_test "overlay" "\"overlay\" must be followed by the name of .*"
385 #test a non-existant overlay subcommand
386 gdb_test "overlay on" "Undefined overlay command.* Try \"help overlay\"."
387 gdb_test "overlay manual" "" "overlay manual #1"
388 gdb_test "overlay auto" ""
389 gdb_test "overlay off" ""
390 gdb_test "overlay list" "No sections are mapped."
391 gdb_test "overlay map" "Overlay debugging not enabled.*" "overlay map #1"
392 gdb_test "overlay unmap" "Overlay debugging not enabled.*" "overlay unmap #1"
393 gdb_test "overlay manual" "" "overlay manual #2"
394 gdb_test "overlay map" "Argument required: name of an overlay section." "overlay map #2"
395 gdb_test "overlay unmap" "Argument required: name of an overlay section." "overlay unmap #2"
397 #test print "p" abbreviation
398 gdb_test "p" "The history is empty." "print \"p\" abbreviation"
400 gdb_test "print" "The history is empty." "print"
402 gdb_test "printf" "Argument required .format-control string and values to print.*" "printf"
404 gdb_test "ptype" "The history is empty." "ptype"
406 gdb_test "pwd" "Working directory .*" "pwd"
408 #test run "r" abbreviation
409 if [istarget "*-*-vxworks*"] then {
410 gdb_test "set args" "" ""
412 gdb_test "r" "Starting program: .*
413 You must specify a function name to run, and arguments if any"\
414 "run \"r\" abbreviation"
415 gdb_test "set args main" "" ""
420 -re "Starting program: .*
421 You can't do that when your target is `None'.*$gdb_prompt $"\
422 { pass "run \"r\" abbreviation" }
423 -re "Starting program: .*
424 No executable file specified.*
425 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
426 { pass "run \"r\" abbreviation" }
427 -re "Starting program: .*
428 No executable specified, use .target exec.\\..*$gdb_prompt $"\
429 { pass "run \"r\" abbreviation" }
430 -re "Starting program: .*
431 No image loaded into target.*$gdb_prompt $"\
432 { pass "run \"r\" abbreviation" }
433 -re "Starting program: .*
434 No program loaded.*$gdb_prompt $"\
435 { pass "run \"r\" abbreviation" }
436 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\
437 { pass "run \"r\" abbreviation" }
438 -re ".*$gdb_prompt $" { fail "run \"r\" abbreviation" }
439 timeout { fail "(timeout) run \"r\" abbreviation" }
444 if [istarget "*-*-vxworks*"] then {
445 gdb_test "set args" "" ""
447 gdb_test "run" "Starting program: .*
448 You must specify a function name to run, and arguments if any"
449 gdb_test "set args main" "" ""
454 -re "Starting program:.*You can't do that when your target is `None'.*$gdb_prompt $" { pass "run" }
455 -re "Starting program: .*
456 No executable file specified.*
457 Use the \"file\" or \"exec-file\" command.*$gdb_prompt $"\
459 -re "Starting program: .*
460 No executable specified, use .target exec.\\..*$gdb_prompt $"\
462 -re "Starting program: .*
463 No image loaded into target.*$gdb_prompt $"\
465 -re "Starting program: .*
466 No program loaded.*$gdb_prompt $"\
467 { pass "run \"r\" abbreviation" }
468 -re "Don't know how to run. Try \"help target\"..*$gdb_prompt $"\
470 -re ".*$gdb_prompt $" { fail "run" }
471 timeout { fail "(timeout) run" }
476 gdb_test "rbreak" "" "rbreak"
479 gdb_test "restore" "You can't do that without a process to debug\."
482 # The middle case accomodated the obsolete a29k, where doing the "ni"
483 # above causes an initial stack to be created.
484 gdb_test "return" "No selected frame..*" "return" "Make .* return now.*y or n. $" "y"
488 gdb_test "reverse-search" "No previous regular expression.*|There is no previous regular expression.*" "reverse-search"
489 #test step "s" abbreviation
490 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #1"
492 gdb_test "step" "The program is not being run." "step #1"
494 gdb_test "search" "No previous regular expression.*|There is no previous regular expression.*" "search"
496 gdb_test "section" "Must specify section name and its virtual address.*" "section"
498 gdb_test "set annotate" "Argument required .integer to set it to.*" "set annotate"
500 gdb_test "set args" "" "set args"
501 #test set check "c" abbreviation
502 gdb_test "set c" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"c\" abbreviation"
503 #test set check "ch" abbreviation
504 gdb_test "set ch" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check \"ch\" abbreviation"
506 gdb_test "set check" "\"set check\" must be followed by the name of a check subcommand.(\[^\r\n\]*\[\r\n\])+List of set check subcommands:(\[^\r\n\]*\[\r\n\])+set check range -- Set range checking(\[^\r\n\]*\[\r\n\])+set check type -- Set type checking(\[^\r\n\]*\[\r\n\])+Type \"help set check\" followed by set check subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set check"
507 #test set check range
508 gdb_test "set check range" "" "set check range"
510 gdb_test "set check type" "" "set check type"
512 gdb_test "set complaints" "Argument required .integer to set it to.*" "set complaints"
514 gdb_test "set confirm" "" "set confirm"
515 # Don't test set editing. What if we're talking to a gdb that
516 # won't do editing correctly while we're talking to it?
517 # gdb_test "set editing" "" "set editing"
519 #test set environment
520 gdb_test "set environment" "Argument required .environment variable and value.*" "set environment"
522 gdb_test "set height" "Argument required .integer to set it to.*" "set height"
523 #test set history expansion
524 gdb_test "set history expansion" "" "set history expansion"
525 #test set history filename
526 gdb_test "set history filename" "Argument required .filename to set it to.*" "set history filename"
527 #test set history save
528 gdb_test "set history save" "" "set history save"
529 #test set history size
530 gdb_test "set history size" "Argument required .integer to set it to.*" "set history size"
532 gdb_test "set history" "\"set history\" must be followed by the name of a history subcommand.(\[^\r\n\]*\[\r\n\])+List of set history subcommands:(\[^\r\n\]*\[\r\n\])+set history expansion -- Set history expansion on command input(\[^\r\n\]*\[\r\n\])+set history filename -- Set the filename in which to record the command history(\[^\r\n\]*\[\r\n\])+set history save -- Set saving of the history record on exit(\[^\r\n\]*\[\r\n\])+set history size -- Set the size of the command history(\[^\r\n\]*\[\r\n\])+Type \"help set history\" followed by set history subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set history"
534 gdb_test "set language" "Requires an argument. Valid arguments are auto, local, unknown, ada, c, c.., asm, minimal, fortran, objective-c, java, modula-2, pascal, scheme." "set language"
536 gdb_test "set listsize" "Argument required .integer to set it to.*" "set listsize"
537 #test set print "p" abbreviation
538 gdb_test "set p" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"p\" abbreviation"
539 #test set print "pr" abbreviation
540 gdb_test "set pr" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print \"pr\" abbreviation"
542 gdb_test "set print" "\"set print\" must be followed by the name of a print subcommand.(\[^\r\n\]*\[\r\n\])+List of set print subcommands:(\[^\r\n\]*\[\r\n\])+Type \"help set print\" followed by set print subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "set print"
543 #test set print address
544 gdb_test "set print address" "" "set print address"
545 #test set print array
546 gdb_test "set print array" "" "set print array"
547 #test set print asm-demangle
548 gdb_test "set print asm-demangle" "" "set print asm-demangle"
549 #test set print demangle
550 gdb_test "set print demangle" "" "set print demangle"
551 #test set print elements
552 gdb_test "set print elements" "Argument required .integer to set it to.*" "set print elements"
553 #test set print object
554 gdb_test "set print object" "" "set print object"
555 #test set print pretty
556 gdb_test "set print pretty" "" "set print pretty"
557 #test set print sevenbit-strings
558 gdb_test "set print sevenbit-strings" "" "set print sevenbit-strings"
559 #test set print union
560 gdb_test "set print union" "" "set print union"
562 gdb_test "set print vtbl" "" "set print vtbl"
563 # FIXME -- need a test for "set prompt"
565 gdb_test "set radix" "Input and output radices now set to decimal 10, hex a, octal 12.*" "set radix"
566 #test set symbol-reloading
567 gdb_test "set symbol-reloading" "" "set symbol-reloading"
569 gdb_test "set variable" "Argument required .expression to compute.*" "set variable"
571 gdb_test "set verbose" "" "set verbose"
573 gdb_test "set width" "Argument required .integer to set it to.*" "set width"
575 # This is only supported on targets which use exec.o.
576 gdb_test "set write" "" "set write"
578 gdb_test "set" "Argument required .expression to compute.*" "set"
579 #test shell echo Hi dad!
580 gdb_test "shell echo Hi dad!" "Hi dad!" "shell echo Hi dad!"
582 gdb_test "show annotate" "Annotation_level is 0." "show annotate"
584 gdb_test "show args" "Argument list to give program being debugged when it is started is \"\"." "show args"
585 #test show check "c" abbreviation
586 gdb_test "show c" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\".*" "show check \"c\" abbreviation"
587 #test show check "ch" abbreviation
588 gdb_test "show ch" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check \"ch\" abbreviation"
590 gdb_test "show check" "range: *Range checking is \"auto; currently off\".(\[^\r\n\]*\[\r\n\])+type: *Type checking is \"auto; currently off\"." "show check"
591 #test show check range
592 gdb_test "show check range" "Range checking is \"auto; currently off\"." "show check range"
593 #test show check type
594 gdb_test "show check type" "Type checking is \"auto; currently off\"." "show check type"
596 gdb_test "show commands" "" "show commands"
597 #test show complaints
598 gdb_test "show complaints" "Max number of complaints about incorrect symbols is 0." "show complaints"
600 gdb_test "show confirm" "Whether to confirm potentially dangerous operations is o\[a-z\]*." "show confirm"
601 #test show convenience
602 gdb_test "show convenience" "\\\$_siginfo = void" "show convenience"
603 #test show directories
604 gdb_test "show directories" "Source directories searched: .cdir\[:;\].cwd" "show directories"
606 gdb_test "show editing" "Editing of command lines as they are typed is o\[a-z\]*." "show editing"
608 gdb_test "show height" "Number of lines gdb thinks are in a page is.*" "show height"
609 #test show history expansion
610 gdb_test "show history expansion" "History expansion on command input is o\[a-z\]*.*" "show history expansion"
611 #test show history filename
612 gdb_test "show history filename" "The filename in which to record the command history is.*.gdb_history.*" "show history filename"
613 #test show history save
614 gdb_test "show history save" "Saving of the history record on exit is on." "show history save"
615 #test show history size
616 gdb_test "show history size" "The size of the command history is.*" "show history size"
618 gdb_test "show history" "expansion: *History expansion on command input is o(\[^\r\n\]*\[\r\n\])+filename: *The filename in which to record the command history is.*.gdb_history(\[^\r\n\]*\[\r\n\])+save: *Saving of the history record on exit is o(\[^\r\n\]*\[\r\n\])+size: * The size of the command history is.*" "show history"
620 gdb_test "show language" "The current source language is \"auto; currently c\"." "show language"
622 gdb_test "show listsize" "Number of source lines gdb will list by default is 10." "show listsize"
623 #test show print "p" abbreviation
624 gdb_test "show p" ".*" "show p"
625 #test show print "pr" abbreviation
626 gdb_test "show pr" ".*" "show pr"
628 gdb_test "show print" "" "show print"
630 gdb_test "show paths" "Executable and object file path:.*" "show paths"
631 #test show print address
632 gdb_test "show print address" "Printing of addresses is on." "show print address"
633 #test show print array
634 gdb_test "show print array" "Prettyprinting of arrays is on." "show print array"
635 #test show print asm-demangle
636 gdb_test "show print asm-demangle" "Demangling of C\[+\]+/ObjC names in disassembly listings is on." "show print asm-demangle"
637 #test show print demangle
638 gdb_test "show print demangle" "Demangling of encoded C\[+\]+/ObjC names when displaying symbols is on." "show print demangle"
639 #test show print elements
640 gdb_test "show print elements" "Limit on string chars or array elements to print is 200." "show print elements"
641 #test show print object
642 gdb_test "show print object" "Printing of object's derived type based on vtable info is on." "show print object"
643 #test show print pretty
644 gdb_test "show print pretty" "Prettyprinting of structures is on." "show print pretty"
645 #test show print sevenbit-strings
646 gdb_test "show print sevenbit-strings" "Printing of 8-bit characters in strings as .nnn is on." "show print sevenbit-strings"
647 #test show print union
648 gdb_test "show print union" "Printing of unions interior to structures is on." "show print union"
649 #test show print vtbl
650 gdb_test "show print vtbl" "Printing of C\[+\]+ virtual function tables is on." "show print vtbl"
652 # In the FAIL case, can't just look for $gdb_prompt because that will match
653 # the output, rather than the prompt. So look for $gdb_prompt at the start
655 gdb_test "show prompt" "Gdb's prompt is \"$gdb_prompt \".*" "show prompt"
657 gdb_test "show radix" "Input and output radices set to decimal 10, hex a, octal 12." "show radix"
658 #test show symbol-reloading
659 gdb_test "show symbol-reloading" "Dynamic symbol table reloading multiple times in one run is on." "show symbol-reloading"
661 gdb_test "show user" "" "show user"
663 gdb_test "show values" "" "show values"
665 gdb_test "show verbose" "Verbose printing of informational messages is o.*|Verbosity is off.*" "show verbose"
667 gdb_test "show version" "GNU gdb \[0-9\.\]*(\[^\r\n\]*\[\r\n\])+Copyright \\(C\\) \[0-9\]* Free Software Foundation, Inc(\[^\r\n\]*\[\r\n\])+License GPLv3\\+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>(\[^\r\n\]*\[\r\n\])+This is free software: you are free to change and redistribute it.(\[^\r\n\]*\[\r\n\])+There is NO WARRANTY, to the extent permitted by law. Type \"show copying\"(\[^\r\n\]*\[\r\n\])+and \"show warranty\" for details..*" "show version"
669 gdb_test "show width" "Number of characters gdb thinks are in a line is.*" "show width"
671 # This is only supported on targets which use exec.o.
672 gdb_test "show write" "Writing into executable and core files is o.*" "show write"
674 gdb_test "show" "confirm: *Whether to confirm potentially dangerous operations is on.(\[^\r\n\]*\[\r\n\])+history filename: *The filename in which to record the command history is (\[^\r\n\]*\[\r\n\])+history save: *Saving of the history record on exit is on.(\[^\r\n\]*\[\r\n\])+history size: *The size of the command history is(\[^\r\n\]*\[\r\n\])+listsize: *Number of source lines gdb will list by default is 10(\[^\r\n]*\[\r\n\])+print elements: *Limit on string chars or array elements to print is 200..*" "show"
675 #test stepi "si" abbreviation
676 gdb_test "si" "The program is not being run." "stepi \"si\" abbreviation"
678 gdb_test "stepi" "The program is not being run." "stepi"
680 gdb_test "signal" "The program is not being run." "signal"
682 gdb_test "source" "source command requires file name of file to source..*|No such file or directory.*" "source"
683 #test step "s" abbreviation
684 gdb_test "s" "The program is not being run." "step \"s\" abbreviation #2"
686 gdb_test "step" "The program is not being run." "step #2"
688 gdb_test "symbol-file" "" "symbol-file"
691 gdb_test "target child" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"child\". *Try \"help target\".*" "target child"
694 gdb_test "target procfs" "Use the \"run\" command to start a Unix child process.*|Undefined target command: \"procfs\". *Try \"help target\".*" "target procfs"
697 send_gdb "target core\n"
699 -re "No core file specified..*$gdb_prompt $" { pass "target core" }
700 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
703 send_user "\t\tDidn't kill program being debugged\n"
705 gdb_expect -re "$gdb_prompt $" { }
708 -re "Undefined target command: \"core\". Try \"help target\"..*$gdb_prompt $" { pass "target core" }
709 -re ".*$gdb_prompt $" { fail "target core" }
710 timeout { fail "(timeout) target core" }
714 send_gdb "target exec\n"
716 -re "No executable file now..*$gdb_prompt $"\
717 { pass "target exec" }
718 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
721 send_user "\t\tDidn't kill program being debugged\n"
723 gdb_expect -re "$gdb_prompt $" { }
726 -re ".*$gdb_prompt $" { fail "target exec" }
727 timeout { fail "(timeout) target exec" }
731 if ![istarget "*-*-udi*"] then {
732 send_gdb "target remote\n"
734 -re "To open a remote debug connection, you need to specify what.*serial.*device is attached to the remote system.*.e.g. .*$gdb_prompt $"\
735 { pass "target remote" }
736 -re ".*A program is being debugged already. Kill it. .y or n.*$" {
739 send_user "\t\tDidn't kill program being debugged\n"
741 gdb_expect -re "$gdb_prompt $" { }
744 -re ".*$gdb_prompt $" { fail "target remote" }
745 timeout { fail "(timeout) target remote" }
750 gdb_test "target" "Argument required .target name.*" "target"
752 gdb_test "tbreak" "No default breakpoint address now." "tbreak"
754 gdb_test "tty" "Argument required .filename to set it to\..*" "tty"
755 #test until "u" abbreviation
756 gdb_test "u" "The program is not being run." "until \"u\" abbreviation"
758 gdb_test "until" "The program is not being run." "until"
760 # FIXME -- need to dump full output to detailed log
761 send_gdb "undisplay\n"
763 -re "Delete all auto-display expressions.*y or n. $" {
766 -re "$gdb_prompt $" { pass "undisplay prompt" }
767 timeout { fail "(timeout) (timeout) undisplay prompt" }
770 timeout { fail "(timeout) (timeout) undisplay prompt" }
773 #test unset environment
774 send_gdb "unset environment\n"
776 -re "Delete all environment variables?.*y or n. $" {
779 -re "$gdb_prompt $" { pass "unset environmentprompt" }
781 fail "(timeout) (timeout) unset environment prompt"
786 fail "(timeout) (timeout) unset environment prompt"
791 gdb_test "unset" "\"unset\" must be followed by the name of an unset subcommand.(\[^\r\n\]*\[\r\n\])+List of unset subcommands:(\[^\r\n\]*\[\r\n\])+unset environment -- Cancel environment variable VAR for the program(\[^\r\n\]*\[\r\n\])+Type \"help unset\" followed by unset subcommand name for full documentation.(\[^\r\n\]*\[\r\n\])+Command name abbreviations are allowed if unambiguous." "unset"
794 gdb_test "up-silently" "No stack." "up-silently"
796 gdb_test "watch" "Argument required .expression to compute.*" "watch"
798 gdb_test "whatis" "The history is empty." "whatis"
800 gdb_test "where" "No stack." "where"
802 gdb_test "x" "Argument required .starting display address.*" "x"
806 set timeout $prev_timeout