gdb/testsuite/gdb.base/dfp-test.exp

   1 # Copyright (C) 2007-2013 Free Software Foundation, Inc.
   2
   3 # This program is free software; you can redistribute it and/or modify
   4 # it under the terms of the GNU General Public License as published by
   5 # the Free Software Foundation; either version 3 of the License, or
   6 # (at your option) any later version.
   7 #
   8 # This program is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 # GNU General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU General Public License
  14 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15
  16 #  This file was written by Wu Zhou. (woodzltc@cn.ibm.com)
  17
  18 # This file is part of the gdb testsuite.  It is intended to test that
  19 # gdb could correctly handle decimal floating point introduced in IEEE 754R.
  20
  21 set testfile "dfp-test"
  22 set srcfile ${testfile}.c
  23 set binfile ${objdir}/${subdir}/${testfile}
  24
  25 # Try to compile the test case.  If we can't, assume the
  26 # toolchain does not yet provide DFP support and bail out.
  27 if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {quiet debug}] != "" } {
  28     verbose "Skipping DFP tests."
  29     return -1
  30 }
  31
  32 gdb_exit
  33 gdb_start
  34 gdb_reinitialize_dir $srcdir/$subdir
  35 gdb_load ${binfile}
  36
  37 if ![runto_main] then {
  38     perror "couldn't run to breakpoint"
  39     continue
  40 }
  41
  42 set sizeof_long [get_sizeof "long" 4]
  43
  44 proc d32_set_tests {} {
  45
  46     gdb_test "p d32=123.45df" " = 123.45"
  47     gdb_test "p d32=12345.df" " = 12345"
  48     gdb_test "p d32=12345.67df" " = 12345.67"
  49     gdb_test "p d32=1234567.df" " = 1234567"
  50
  51     gdb_test "p d32=1.234567E0df" " = 1.234567"
  52     gdb_test "p d32=1.234567E10df" " = 1.234567E\\+10"
  53     gdb_test "p d32=1.234567E+96df" " = 1.234567E\\+96"
  54
  55     # Test that gdb could handle the max, normalized min and subnormalized min.
  56     gdb_test "p d32=9.999999E96df" " = 9.999999E\\+96"
  57     gdb_test "p d32=1.0E-95df" " = 1.0E\\-95"
  58     gdb_test "p d32=1.E-101df" " = 1E\\-101"
  59     gdb_test "p d32=0.000001E-95df" " = 1E\\-101"
  60
  61     # Test that gdb could detect coefficient/exponent out of range.
  62     # The coefficient out of range will be rounded to its nearest value.
  63     # And the exponent out of range will be handled as infinity.
  64     gdb_test "p d32=1.2345678df" " = 1.234568" "1.2345678 is rounded to 1.234568"
  65     gdb_test "p d32=1.0E-101df" " = 1E-101" "1.0E-101 is rounded to 1E-101"
  66     gdb_test "p d32=1.234567E+97df" " = Infinity" "1.234567E+97 is Infinity"
  67
  68     # Test that gdb could detect the errors in the string representation of _Decimal32
  69     gdb_test "p d32=12345.df" " = 12345" "12345. is a valid number"
  70     gdb_test "p d32=12345df" ".*Invalid number.*" "12345 is an invalid number"
  71     gdb_test "p d32=1.23Edf" ".*Conversion syntax.*" "1.23E is an invalid number"
  72     gdb_test "p d32=1.23E45Adf" ".*Conversion syntax.*" "1.23E45A is an invalid number"
  73 }
  74
  75 proc d64_set_tests {} {
  76
  77     gdb_test "p d64=123.45dd" " = 123.45"
  78     gdb_test "p d64=12345.dd" " = 12345"
  79     gdb_test "p d64=12345.67dd" " = 12345.67"
  80     gdb_test "p d64=1.234567890123456dd" " = 1.234567890123456"
  81
  82     gdb_test "p d64=1.234567890123456E10dd" " = 12345678901.23456"
  83     gdb_test "p d64=1.234567890123456E100dd" " = 1.234567890123456E\\+100"
  84     gdb_test "p d64=1.234567890123456E384dd" " = 1.234567890123456E\\+384"
  85
  86     # Test that gdb could handle the max, normalized min and subnormalized min.
  87     gdb_test "p d64=9.999999999999999E384dd" " = 9.999999999999999E\\+384"
  88     gdb_test "p d64=1.E-383dd" " = 1E\\-383"
  89     gdb_test "p d64=1.E-398dd" " = 1E\\-398"
  90     gdb_test "p d64=0.000000000000001E-383dd" " = 1E\\-398"
  91
  92     # Test that gdb could detect coefficient/exponent out of range.
  93     # The coefficient out of range will be rounded to its nearest value.
  94     # And the exponent out of range will be handled as infinity.
  95     gdb_test "p d64=1.2345678901234567dd" " = 1.234567890123457" "1.2345678901234567 is rounded to 1.234567890123457"
  96     gdb_test "p d64=9.9999999999999999E384dd" " = Infinity" "d64=9.9999999999999999E384 is Infinity"
  97     gdb_test "p d64=1.234567890123456E385dd" " = Infinity" "d64=1.234567890123456E385 is Infinity"
  98
  99     # Test that gdb could detect the errors in the string representation of _Decimal64
 100     gdb_test "p d64=12345dd" ".*Invalid number.*" "12345dd is an invalid number"
 101     gdb_test "p d64=1.23Edd" ".*Conversion syntax.*" "1.23E is an invalid number"
 102     gdb_test "p d64=1.23E45Add" ".*Conversion syntax.*" "1.23E45A is an invalid number"
 103 }
 104
 105 proc d128_set_tests {} {
 106
 107     gdb_test "p d128=123.45dl" " = 123.45"
 108     gdb_test "p d128=12345.dl" " = 12345"
 109     gdb_test "p d128=12345.67dl" " = 12345.67"
 110     gdb_test "p d128=1.234567890123456789012345678901234dl" " = 1.234567890123456789012345678901234"
 111
 112     gdb_test "p d128=1.234567890123456E10dl" " = 12345678901.23456"
 113     gdb_test "p d128=1.234567890123456E100dl" " = 1.234567890123456E\\+100"
 114     gdb_test "p d128=1.234567890123456E1000dl" " = 1.234567890123456E\\+1000"
 115
 116     # Test that gdb could handle the max, normalized min and subnormalized min.
 117     gdb_test "p d128=9.999999999999999999999999999999999E6144dl" " = 9.999999999999999999999999999999999E\\+6144"
 118     gdb_test "p d128=1.E-6143dl" " = 1E\\-6143"
 119     gdb_test "p d128=1.E-6176dl" " = 1E\\-6176"
 120     gdb_test "p d128=0.000000000000000000000000000000001E-6143dl" " = 1E\\-6176"
 121
 122     # Test that gdb could detect coefficient/exponent out of range.
 123     # The coefficient out of range will be rounded to its nearest value.
 124     # And the exponent out of range will be handled as infinity.
 125     gdb_test "p d128=1.2345678901234567890123456789012345dl" "1.234567890123456789012345678901234" "1.2345678901234567890123456789012345 is rounded to 1.234567890123456789012345678901234"
 126     gdb_test "p d128=1.234567890123456E6145dl" "Infinity" "d128=1.234567890123456E6145 is Infinity"
 127
 128     # Test that gdb could detect the errors in the string representation of _Decimal128
 129     gdb_test "p d128=12345dl" ".*Invalid number.*" "12345dl is an invalid number"
 130     gdb_test "p d128=1.23Edl" ".*Conversion syntax.*" "1.23E is an invalid number"
 131     gdb_test "p d128=1.23E45Adl" ".*Conversion syntax.*" "1.23E45A is an invalid number"
 132 }
 133
 134 # Different tests on 32-bits decimal floating point, including the printing
 135 # of finite numbers, infinite and NaN, and also the setting of different
 136 # decimal value.
 137
 138 if [gdb_test "next" \
 139     ".*Positive infd32.*" \
 140     "next after initializing d32"] then { gdb_suppress_tests }
 141 gdb_test "print d32" "1.2345" "d32 is initialized to 1.2345"
 142
 143 if [gdb_test "next" \
 144     ".*Negative infd32.*" \
 145     "next after assigning builtin infinity to d32"] then { gdb_suppress_tests }
 146 gdb_test "print d32" "Infinity" "d32 is positive Infinity"
 147
 148 if [gdb_test "next" \
 149     ".*__builtin_nand32.*" \
 150     "next after assigning negative builtin infinity to d32"] then { gdb_suppress_tests }
 151 gdb_test "print d32" "-Infinity" "d32 is negative Infinity"
 152
 153 if [gdb_test "next" \
 154     ".*d64 = 1.2345.*" \
 155     "next after assigning builtin NaN to d32"] then { gdb_suppress_tests }
 156 gdb_test "print d32" "NaN" "d32 is NaN"
 157
 158 d32_set_tests
 159
 160
 161 # Different tests on 64-bits decimal floating point, including the display
 162 # of finite number, infinite and NaN, and also the setting of different
 163 # decimal value.
 164
 165 if [gdb_test "next" \
 166     ".*Positive infd64.*" \
 167     "next after initializing d64"] then { gdb_suppress_tests }
 168 gdb_test "print d64" "1.2345" "d64 is initialized to 1.2345"
 169
 170 if [gdb_test "next" \
 171     ".*Negative infd64.*" \
 172     "next after assigning builtin infinity to d64"] then { gdb_suppress_tests }
 173 gdb_test "print d64" "Infinity" "d64 is positive Infinity"
 174
 175 if [gdb_test "next" \
 176     ".*__builtin_nand64.*" \
 177     "next after assigning negative builtin infinity to d64"] then { gdb_suppress_tests }
 178 gdb_test "print d64" "-Infinity" "d64 is negative Infinity"
 179
 180 if [gdb_test "next" \
 181     ".*d128 = 1.2345.*" \
 182     "next after assigning builtin NaN to d64"] then { gdb_suppress_tests }
 183 gdb_test "print d64" "NaN" "d64 is NaN"
 184
 185 d64_set_tests
 186
 187
 188 # Different tests on 128-bits decimal floating point, including the display
 189 # of finite number, infinite and NaN, and also the setting of different
 190 # decimal value.
 191
 192 if [gdb_test "next" \
 193     ".*Positive infd128.*" \
 194     "next after initializing d128"] then { gdb_suppress_tests }
 195 gdb_test "print d128" "1.2345" "d128 is initialized to 1.2345"
 196
 197 d128_set_tests
 198
 199 if [gdb_test "next" \
 200     ".*Negative infd128.*" \
 201     "next after assigning builtin infinity to d128"] then { gdb_suppress_tests }
 202 gdb_test "print d128" "Infinity" "d128 is positive Infinity"
 203
 204 if [gdb_test "next" \
 205     ".*__builtin_nand128.*" \
 206     "next after assigning negative builtin infinity to d128"] then { gdb_suppress_tests }
 207 gdb_test "print d128" "-Infinity" "d128 is negative Infinity"
 208
 209 if [gdb_test "next" \
 210     ".*arg0_32.*" \
 211     "next after assigning builtin NaN to d128"] then { gdb_suppress_tests }
 212 gdb_test "print d128" "NaN" "d128 is NaN"
 213
 214 # The following tests are intended to verify that gdb can correctly handle
 215 # DFP types in function arguments.
 216
 217 gdb_breakpoint arg0_32
 218 gdb_continue_to_breakpoint "entry to arg0_32"
 219 gdb_test "backtrace" ".*arg0_32 \\(arg0=0.1, arg1=1.0, arg2=2.0, arg3=3.0, arg4=4.0, arg5=5.0\\).*" "backtrace at arg0_32"
 220
 221 gdb_breakpoint arg0_64
 222 gdb_continue_to_breakpoint "entry to arg0_64"
 223 gdb_test "backtrace" ".*arg0_64 \\(arg0=0.1, arg1=1.0, arg2=2.0, arg3=3.0, arg4=4.0, arg5=5.0\\).*" "backtrace at arg0_64"
 224
 225 gdb_breakpoint arg0_128
 226 gdb_continue_to_breakpoint "entry to arg0_128"
 227 gdb_test "backtrace" ".*arg0_128 \\(arg0=0.1, arg1=1.0, arg2=2.0, arg3=3.0, arg4=4.0, arg5=5.0\\).*" "backtrace at arg0_128"
 228
 229 # Test calling inferior function with DFP arguments or return value.
 230
 231 gdb_test "call arg0_32 (1.2df, 2.2df, 3.2df, 4.2df, 5.2df, 6.2df)" "Breakpoint.*arg0_32.*" "Call function with correct _Decimal32 arguments."
 232 gdb_test "backtrace 1" "\n#\[0-9\]+  arg0_32 \\(arg0=1.2, arg1=2.2, arg2=3.2, arg3=4.2, arg4=5.2, arg5=6.2\\).*" "Backtrace function with correct _Decimal32 arguments."
 233 gdb_test "finish" " = 1.2" "Correct _Decimal32 return value from called function."
 234
 235 gdb_test "call arg0_64 (1.2dd, 2.2dd, 3.2dd, 4.2dd, 5.2dd, 6.2dd)" "Breakpoint.*arg0_64.*" "Call function with correct _Decimal64 arguments."
 236 gdb_test "backtrace 1" "\n#\[0-9\]+  arg0_64 \\(arg0=1.2, arg1=2.2, arg2=3.2, arg3=4.2, arg4=5.2, arg5=6.2\\).*" "Backtrace function with correct _Decimal64 arguments."
 237 gdb_test "finish" " = 1.2" "Correct _Decimal64 return value from called function."
 238
 239 gdb_test "call arg0_128 (1.2dl, 2.2dl, 3.2dl, 4.2dl, 5.2dl, 6.2dl)" "Breakpoint.*arg0_128.*" "Call function with correct _Decimal128 arguments."
 240 gdb_test "backtrace 1" "\n#\[0-9\]+  arg0_128 \\(arg0=1.2, arg1=2.2, arg2=3.2, arg3=4.2, arg4=5.2, arg5=6.2\\).*" "Backtrace function with correct _Decimal128 arguments."
 241 gdb_test "finish" " = 1.2" "Correct _Decimal128 return value from called function."
 242
 243 gdb_test "call decimal_dec128_align (double_val1, dec128_val2, double_val3, double_val4, double_val5, double_val6, double_val7, double_val8, double_val9, double_val10, double_val11, double_val12, double_val13, double_val14)" " = 1" \
 244   "Call function with mixed decimal float arguments TEST."
 245
 246 gdb_test "call decimal_mixed (dec32_val1, dec64_val1, dec128_val1)" " = 1" \
 247   "Call function with mixed decimal float arguments."
 248
 249 gdb_test "call decimal_many_args_dec32 (dec32_val1, dec32_val2, dec32_val3, dec32_val4, dec32_val5, dec32_val6, dec32_val7, dec32_val8, dec32_val9, dec32_val10, dec32_val11, dec32_val12, dec32_val13, dec32_val14, dec32_val15, dec32_val16)" " = 1" \
 250   "Call function with many _Decimal32 arguments."
 251
 252 gdb_test "call decimal_many_args_dec64 (dec64_val1, dec64_val2, dec64_val3, dec64_val4, dec64_val5, dec64_val6, dec64_val7, dec64_val8, dec64_val9, dec64_val10, dec64_val11, dec64_val12, dec64_val13, dec64_val14, dec64_val15, dec64_val16)" " = 1" \
 253   "Call function with many _Decimal64 arguments."
 254
 255 gdb_test "call decimal_many_args_dec128 (dec128_val1, dec128_val2, dec128_val3, dec128_val4, dec128_val5, dec128_val6, dec128_val7, dec128_val8, dec128_val9, dec128_val10, dec128_val11, dec128_val12, dec128_val13, dec128_val14, dec128_val15, dec128_val16)" " = 1" \
 256   "Call function with many _Decimal128 arguments."
 257
 258 gdb_test "call decimal_many_args_mixed (dec32_val1, dec32_val2, dec32_val3, dec64_val4, dec64_val5, dec64_val6, dec64_val7, dec128_val8, dec128_val9, dec128_val10, dec32_val11, dec64_val12, dec32_val13, dec64_val14, dec128_val15)" " = 1" \
 259   "Call function with many mixed decimal float arguments."
 260
 261 # The following tests are intended to verify that gdb can handle DFP types
 262 # correctly in struct.
 263
 264 gdb_breakpoint [gdb_get_line_number "Exit point"]
 265 gdb_continue_to_breakpoint "Setting a decimal struct"
 266 gdb_test "print ds.dec32" " = 1.2345"
 267 gdb_test "print ds.dec64" " = 1.2345"
 268 gdb_test "print ds.dec128" " = 1.2345"
 269
 270 # Test expressions with DFP variables.
 271
 272 gdb_test "print d32 + ds.dec32" " = 1.3345"
 273 gdb_test "print d64 + ds.dec64" " = 1.3345"
 274 gdb_test "print d128 + ds.dec128" " = 1.3345"
 275
 276 # Test conversion between different _Decimal sizes.
 277
 278 gdb_test "ptype d64 + ds.dec32" " = volatile _Decimal64"
 279 gdb_test "ptype d128 + ds.dec32" " = volatile _Decimal128"
 280 gdb_test "ptype d128 + ds.dec64" " = volatile _Decimal128"
 281
 282 # Mixture of Decimal and integral operands
 283 gdb_test "p d32 + 1" " = 1.1"
 284 gdb_test "p 2 + d64" " = 2.1"
 285 gdb_test "p ds.int4 + d128" " = 1.1"
 286 gdb_test "ptype d32 + 1" " = volatile _Decimal32"
 287 gdb_test "ptype ds.int4 + d128" " = volatile _Decimal128"
 288
 289 # Test other operations with DFP operands
 290 gdb_test "p !d32" " = 0"
 291 gdb_test "p !d64" " = 0"
 292 gdb_test "p !d128" " = 0"
 293 gdb_test "p +d32" " = 0.1"
 294 gdb_test "p +d64" " = 0.1"
 295 gdb_test "p +d128" " = 0.1"
 296 gdb_test "p d64 == d128" " = 1"
 297 gdb_test "p d128 == ds.dec32" " = 0"
 298 gdb_test "p d128 == d32" " = 1"
 299 gdb_test "p ds.dec32 == ds.dec64" " = 1"
 300 gdb_test "p d32 < ds.dec32" " = 1"
 301 gdb_test "p d64 < ds.dec64" " = 1"
 302 gdb_test "p d128 < ds.dec128" " = 1"
 303 gdb_test "p ds.dec32 < d32" " = 0"
 304 gdb_test "p d64 > ds.dec64" " = 0"
 305 gdb_test "p ds.dec128 > d128 " " = 1"
 306 gdb_test "p d32 < ds.int4" " = 1"
 307 gdb_test "p ds.int4 > d32" " = 1"
 308 gdb_test "p ds.dec32 < ds.int4" " = 0"
 309 gdb_test "p ds.int4 > ds.dec64" " = 0"
 310 gdb_test "p ds.dec128 > ds.int4" " = 1"
 311
 312 # Reject operation with integral larger than 32-bits
 313 if { ${sizeof_long} > 4 } {
 314   gdb_test "p d32 + ds.long8" "Conversion of large integer to a decimal floating type is not supported."
 315 }
 316
 317 # Reject operation with DFP and Binary FP
 318 gdb_test "p d64 + ds.float4" "Mixing decimal floating types with other floating types is not allowed."
 319 gdb_test "p ds.double8 + d128" "Mixing decimal floating types with other floating types is not allowed."
 320
 321 # The following tests are intended to verify that gdb can handle "d1=d2"
 322 # and "d1=-d2" correctly.
 323
 324 gdb_test "print ds.dec32=d32" " = 0.1"
 325 gdb_test "print ds.dec64=d64" " = 0.1"
 326 gdb_test "print ds.dec128=d128" " = 0.1"
 327 gdb_test "print ds.dec32 = -d32" " = -0.1"
 328 gdb_test "print ds.dec64 = -d64" " = -0.1"
 329 gdb_test "print ds.dec128 = -d128" " = -0.1"
 330
 331 # Test cast to and from DFP values
 332
 333 gdb_test "print ds.double8 = ds.dec64" " = -0.(0999.*|1000.*)"
 334 gdb_test "print ds.dec64 = ds.float4" " = 3.(0999.*|1000.*)"
 335 gdb_test "print ds.dec128 = -ds.double8" " = 0.(0999.*|1000.*)"
 336 gdb_test "print ds.dec128 = ds.dec32" " = -0.1"
 337 gdb_test "print ds.dec32 = ds.int4" " = 1"
 338 gdb_test "print ds.int4 = 7.3dl" " = 7"