gdb/testsuite/gdb.mi/mi-simplerun.exp

   1 # Copyright 1999, 2000, 2001, 2002, 2004 Free Software Foundation, Inc.
   2
   3 # This program is free software; you can redistribute it and/or modify
   4 # it under the terms of the GNU General Public License as published by
   5 # the Free Software Foundation; either version 2 of the License, or
   6 # (at your option) any later version.
   7 #
   8 # This program is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 # GNU General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU General Public License
  14 # along with this program; if not, write to the Free Software
  15 # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  16
  17 #
  18 # Test essential Machine interface (MI) operations
  19 #
  20 # Verify that, using the MI, we can run a simple program and perform basic
  21 # debugging activities like: insert breakpoints, run the program,
  22 # step, next, continue until it ends and, last but not least, quit.
  23 #
  24 # The goal is not to test gdb functionality, which is done by other tests,
  25 # but to verify the correct output response to MI operations.
  26 #
  27
  28 load_lib mi-support.exp
  29 set MIFLAGS "-i=mi"
  30
  31 gdb_exit
  32 if [mi_gdb_start] {
  33     continue
  34 }
  35
  36 set testfile "basics"
  37 set srcfile ${testfile}.c
  38 set binfile ${objdir}/${subdir}/${testfile}
  39 if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {
  40      gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
  41 }
  42
  43 mi_delete_breakpoints
  44 mi_gdb_reinitialize_dir $srcdir/$subdir
  45 mi_gdb_reinitialize_dir $srcdir/$subdir
  46 mi_gdb_load ${binfile}
  47
  48 proc test_breakpoints_creation_and_listing {} {
  49     global mi_gdb_prompt
  50     global srcfile
  51     global hex
  52
  53     set line_callee4_head  [gdb_get_line_number "callee4 ("]
  54     set line_callee3_head  [gdb_get_line_number "callee3 ("]
  55     set line_callee2_head  [gdb_get_line_number "callee2 ("]
  56     set line_callee2_body  [expr $line_callee2_head + 2]
  57     set line_main_head     [gdb_get_line_number "main ("]
  58     set line_main_body     [expr $line_main_head + 2]
  59
  60     # Insert some breakpoints and list them
  61     # Also, disable some so they do not interfere with other tests
  62     # Tests:
  63     # -break-insert
  64     # -break-list
  65     # -break-disable
  66     # -break-info
  67
  68     mi_gdb_test "200-break-insert main" \
  69              "200\\^done,bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"$line_main_body\",times=\"0\"\}" \
  70              "break-insert operation"
  71
  72     mi_gdb_test "201-break-insert basics.c:callee2" \
  73              "201\\^done,bkpt=\{number=\"2\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee2\",file=\".*basics.c\",line=\"$line_callee2_body\",times=\"0\"\}" \
  74              "insert breakpoint at basics.c:callee2"
  75
  76     mi_gdb_test "202-break-insert basics.c:$line_callee3_head" \
  77              "202\\^done,bkpt=\{number=\"3\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee3\",file=\".*basics.c\",line=\"$line_callee3_head\",times=\"0\"\}" \
  78              "insert breakpoint at basics.c:\$line_callee3_head"
  79
  80     mi_gdb_test "203-break-insert \"\\\"${srcfile}\\\":$line_callee4_head\"" \
  81              "203\\^done,bkpt=\{number=\"4\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"callee4\",file=\".*basics.c\",line=\"$line_callee4_head\",times=\"0\"\}" \
  82              "insert breakpoint at \"<fullfilename>\":\$line_callee4_head"
  83
  84     mi_gdb_test "204-break-list" \
  85             "204\\^done,BreakpointTable=\{.*,hdr=\\\[.*\\\],body=\\\[bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"$line_main_body\",times=\"0\"\},.*\}\\\]\}" \
  86                 "list of breakpoints"
  87
  88     mi_gdb_test "205-break-disable 2 3 4" \
  89                 "205\\^done.*" \
  90                 "disabling of breakpoints"
  91
  92     mi_gdb_test "206-break-info 2" \
  93             "206\\^done,BreakpointTable=\{.*,hdr=\\\[.*\\\],body=\\\[bkpt=\{number=\"2\",.*,enabled=\"n\",.*\}\\\]\}" \
  94                 "list of breakpoints, 16 disabled"
  95 }
  96
  97 proc test_running_the_program {} {
  98     global mi_gdb_prompt
  99     global hex
 100
 101     set line_main_head     [gdb_get_line_number "main ("]
 102     set line_main_body     [expr $line_main_head + 2]
 103
 104     # Run the program without args, then specify srgs and rerun the program
 105     # Tests:
 106     # -exec-run
 107     # -gdb-set
 108
 109     # mi_gdb_test cannot be used for asynchronous commands because there are
 110     # two prompts involved and this can lead to a race condition.
 111     # The following is equivalent to a send_gdb "000-exec-run\n"
 112     mi_run_cmd
 113     gdb_expect {
 114         -re "000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"\[01\]\",frame=\{addr=\"$hex\",func=\"main\",args=\\\[\\\],file=\".*basics.c\",line=\"$line_main_body\"\}\r\n$mi_gdb_prompt$" {
 115             pass "run to main"
 116         }
 117         -re ".*$mi_gdb_prompt$" {
 118             fail "run to main (2)"
 119         }
 120         timeout {
 121             fail "run to main (timeout)"
 122         }
 123     }
 124 }
 125
 126 proc test_controlled_execution {} {
 127     global mi_gdb_prompt
 128     global hex
 129
 130     set line_callee4_head         [gdb_get_line_number "callee4 ("]
 131     set line_callee4_body         [expr $line_callee4_head + 2]
 132     set line_callee3_head         [gdb_get_line_number "callee3 ("]
 133     set line_callee3_close_brace  [expr $line_callee3_head + 3]
 134     set line_callee1_head         [gdb_get_line_number "callee1 ("]
 135     set line_callee1_body         [expr $line_callee1_head + 2]
 136     set line_main_head            [gdb_get_line_number "main ("]
 137     set line_main_body            [expr $line_main_head + 2]
 138
 139     # Continue execution until a breakpoint is reached, step into calls, verifying
 140     # if the arguments are correctly shown, continue to the end of a called
 141     # function, step over a call (next).
 142     # Tests:
 143     # -exec-continue
 144     # -exec-next
 145     # -exec-step
 146     # -exec-finish
 147
 148     mi_next_to "main" "" "basics.c" [expr $line_main_body + 1] "next at main"
 149
 150     # FIXME: A string argument is not printed right; should be fixed and
 151     #        we should look for the right thing here.
 152     # NOTE: The ``\\\\\"'' is for \".
 153     mi_step_to "callee1" \
 154         "\{name=\"intarg\",value=\"2\"\},\{name=\"strarg\",value=\"$hex \\\\\"A string argument\.\\\\\"\"\},\{name=\"fltarg\",value=\"3.5\"\}" \
 155         "basics.c" "$line_callee1_body" "step at main"
 156
 157     # FIXME: A string argument is not printed right; should be fixed and
 158     #        we should look for the right thing here.
 159     mi_execute_to "exec-step 3" "end-stepping-range" "callee4" "" \
 160         "basics.c" $line_callee4_body "" "step to callee4"
 161
 162     # FIXME: A string argument is not printed right; should be fixed and
 163     #        we should look for the right thing here.
 164     # NOTE: The ``.'' is part of ``gdb-result-var="$1"''
 165     mi_finish_to "callee3" ".*" "basics.c" $line_callee3_close_brace ".1" "0" "exec-finish"
 166 }
 167
 168 proc test_controlling_breakpoints {} {
 169     global mi_gdb_prompt
 170
 171     # Enable, delete, set ignore counts in breakpoints
 172     # (disable was already tested above)
 173     # Tests:
 174     # -break-delete
 175     # -break-enable
 176     # -break-after
 177     # -break-condition
 178
 179 }
 180
 181 proc test_program_termination {} {
 182     global mi_gdb_prompt
 183
 184     # Run to completion: normal and forced
 185     # Tests:
 186     # -exec-abort
 187     # (normal termination of inferior)
 188
 189     # FIXME: "stopped" doesn't seem appropriate.
 190     # mi_gdb_test cannot be used for asynchronous commands because there are
 191     # two prompts involved and this can lead to a race condition.
 192     send_gdb "999-exec-continue\n"
 193     gdb_expect {
 194       -re "999\\^running\r\n$mi_gdb_prompt" {
 195         gdb_expect {
 196           -re "999\\*stopped,reason=\"exited-normally\"\r\n$mi_gdb_prompt$" {
 197             pass "continue to end"
 198           }
 199           -re ".*$mi_gdb_prompt$" {fail "continue to end (2)"}
 200           timeout {fail "continue to end (timeout 2)"}
 201         }
 202       }
 203       -re ".*$mi_gdb_prompt$" {fail "continue to end (1)"}
 204       timeout {fail "continue to end (timeout 1)"}
 205     }
 206 }
 207
 208 test_breakpoints_creation_and_listing
 209 test_running_the_program
 210 test_controlled_execution
 211 test_controlling_breakpoints
 212 test_program_termination
 213
 214 mi_gdb_exit
 215 return 0