gdb/testsuite/gdb.python/python.exp

   1 # Copyright (C) 2008-2018 Free Software Foundation, Inc.
   2
   3 # This program is free software; you can redistribute it and/or modify
   4 # it under the terms of the GNU General Public License as published by
   5 # the Free Software Foundation; either version 3 of the License, or
   6 # (at your option) any later version.
   7 #
   8 # This program is distributed in the hope that it will be useful,
   9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  11 # GNU General Public License for more details.
  12 #
  13 # You should have received a copy of the GNU General Public License
  14 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  15
  16 # This file is part of the GDB testsuite.  It tests the mechanism
  17 # exposing values to Python.
  18
  19 load_lib gdb-python.exp
  20
  21 standard_testfile python.c python-1.c
  22
  23 if {[build_executable $testfile.exp $testfile \
  24          [list $srcfile $srcfile2] debug] == -1} {
  25     return -1
  26 }
  27
  28 # Start with a fresh gdb.
  29 gdb_exit
  30 gdb_start
  31 gdb_reinitialize_dir $srcdir/$subdir
  32
  33 set remote_source2_py [gdb_remote_download host \
  34                            ${srcdir}/${subdir}/source2.py]
  35
  36 # Do this instead of the skip_python_check.
  37 # We want to do some tests when Python is not present.
  38 gdb_test_multiple "python print (23)" "verify python support" {
  39     -re "not supported.*$gdb_prompt $"  {
  40       unsupported "python support is disabled"
  41
  42       # If Python is not supported, verify that sourcing a python script
  43       # causes an error.
  44       gdb_test "source $remote_source2_py" \
  45           "Error in sourced command file:.*" \
  46           "source source2.py when python disabled"
  47
  48       # Verify multi-line python commands cause an error.
  49       gdb_py_test_multiple "multi-line python command" \
  50           "python" "" \
  51           "print (23)" "" \
  52           "end" "not supported.*"
  53
  54       return -1
  55     }
  56     -re "$gdb_prompt $" {}
  57 }
  58
  59 gdb_py_test_multiple "multi-line python command" \
  60   "python" "" \
  61   "print (23)" "" \
  62   "end" "23"
  63
  64 # Spawn interactive Python help from a multi-line command, thus, after
  65 # a secondary prompt.
  66
  67 with_test_prefix "python interactive help" {
  68     set test "python; help(); end"
  69     gdb_test_multiple "python\nhelp()\nend" $test {
  70         -re ".*help utility.*help> $" {
  71             pass $test
  72
  73             # The "quit" must be seen on the output.  A buggy GDB
  74             # would not display it.
  75             gdb_test "quit" "^quit.*leaving help.*" "quit help"
  76         }
  77     }
  78 }
  79
  80 gdb_py_test_multiple "show python command" \
  81   "define zzq" "Type commands for definition of .* just \"end\"\\.*" \
  82   "python" "" \
  83   "print (23)" "" \
  84   "end" "" \
  85   "end" "" \
  86   "show user zzq" "User command \"zzq\":.*  python.*print \\(23\\).*  end"
  87
  88 gdb_py_test_multiple "indented multi-line python command" \
  89   "python" "" \
  90   "def foo ():" "" \
  91   "  print ('hello, world!')" "" \
  92   "foo ()" "" \
  93   "end" "hello, world!"
  94
  95 gdb_test "source $remote_source2_py" "yes" "source source2.py"
  96
  97 gdb_test "source -s source2.py" "yes" "source -s source2.py"
  98
  99 set remote_source2_symlink_notpy \
 100     [gdb_remote_download host ${srcdir}/${subdir}/source2.py \
 101          [standard_output_file "source2-symlink.notpy"]]
 102 set remote_source2_symlink_py [standard_output_file "source2-symlink.py"]
 103 remote_file host delete $remote_source2_symlink_py
 104 set status [remote_exec host "ln -sf $remote_source2_symlink_notpy $remote_source2_symlink_py"]
 105 set test "source -s source2-symlink.py"
 106 if {[lindex $status 0] == 0} {
 107     gdb_test "source -s $remote_source2_symlink_py" "yes" $test
 108 } else {
 109     unsupported "$test (host does not support symbolic links)"
 110 }
 111
 112 gdb_test "python print (gdb.current_objfile())" "None"
 113 gdb_test "python print (gdb.objfiles())" "\\\[\\\]"
 114
 115 # Test http://bugs.python.org/issue4434 workaround in configure.ac
 116 gdb_test "python import itertools; print ('IMPOR'+'TED')" "IMPORTED" "pythonX.Y/lib-dynload/*.so"
 117
 118 gdb_test_no_output \
 119     "python x = gdb.execute('printf \"%d\", 23', to_string = True)"
 120 gdb_test "python print (x)" "23"
 121
 122 gdb_test "python gdb.execute('echo 2\\necho 3\\\\n\\n')" "23" \
 123     "multi-line execute"
 124
 125 # Test post_event.
 126 gdb_py_test_multiple "post event insertion" \
 127   "python" "" \
 128   "someVal = 0" "" \
 129   "class Foo(object):" "" \
 130   "  def __call__(self):" "" \
 131   "    global someVal" "" \
 132   "    someVal += 1" "" \
 133   "gdb.post_event(Foo())" "" \
 134   "end" ""
 135
 136 gdb_test "python print (someVal)" "1" "test post event execution"
 137 gdb_test "python gdb.post_event(str(1))" "RuntimeError: Posted event is not callable.*" \
 138     "test non callable class"
 139
 140 send_gdb "python gdb.post_event(lambda: invalid())\n"
 141 gdb_expect {
 142     -re "name 'invalid' is not defined" {
 143         pass "test post_event error on receipt"
 144     }
 145     default {
 146         fail "test post_event error on receipt"
 147     }
 148 }
 149
 150 # Test (no) pagination of the executed command.
 151 gdb_test "show height" {Number of lines gdb thinks are in a page is unlimited\.}
 152 set lines 10
 153 gdb_test_no_output "set height $lines"
 154
 155 set test "verify pagination beforehand"
 156 gdb_test_multiple "python print (\"\\n\" * $lines)" $test {
 157     -re "--Type <RET>" {
 158         exp_continue
 159     }
 160     -re " for more, q to quit" {
 161         exp_continue
 162     }
 163     -re ", c to continue without paging--$" {
 164         pass $test
 165     }
 166 }
 167 gdb_test "q" "Quit.*Error while executing Python.*" "verify pagination beforehand: q"
 168
 169 gdb_test "python if gdb.execute('python print (\"\\\\n\" * $lines)', to_string=True) == \"\\n\" * [expr $lines + 1]: print (\"yes\")" "yes" "gdb.execute does not page"
 170
 171 set test "verify pagination afterwards"
 172 gdb_test_multiple "python print (\"\\n\" * $lines)" $test {
 173     -re "--Type <RET>" {
 174         exp_continue
 175     }
 176     -re " for more, q to quit" {
 177         exp_continue
 178     }
 179     -re ", c to continue without paging--$" {
 180         pass $test
 181     }
 182 }
 183 gdb_test "q" "Quit.*Error while executing Python.*" "verify pagination afterwards: q"
 184
 185 gdb_test_no_output "set height 0"
 186
 187 gdb_test_no_output "python a = gdb.execute('help', to_string=True)" "collect help from uiout"
 188
 189 gdb_test "python print (a)" ".*aliases -- Aliases of other commands.*" "verify help to uiout"
 190
 191 # Test PR 12212, using InfThread.selected_thread() when no inferior is
 192 # loaded.
 193 gdb_py_test_silent_cmd "python nothread = gdb.selected_thread()" "Attempt to aquire thread with no inferior" 1
 194 gdb_test "python print (nothread == None)" "True" "ensure that no threads are returned"
 195
 196 gdb_py_test_multiple "register atexit function" \
 197     "python" "" \
 198     "import atexit" "" \
 199     "def printit(arg):" "" \
 200     "  print (arg)" "" \
 201     "atexit.register(printit, 'good bye world')" "" \
 202     "end" ""
 203
 204 send_gdb "quit\n"
 205 gdb_expect {
 206     -re "good bye world" {
 207         pass "atexit handling"
 208     }
 209     default {
 210         fail "atexit handling"
 211     }
 212 }
 213
 214 # Start with a fresh gdb.
 215 clean_restart ${testfile}
 216
 217 # The following tests require execution.
 218
 219 if ![runto_main] then {
 220     fail "can't run to main"
 221     return 0
 222 }
 223
 224 set lineno [gdb_get_line_number "Break to end."]
 225 runto $lineno
 226
 227 # Test gdb.decode_line.
 228 gdb_test "python gdb.decode_line(\"main.c:43\")" \
 229     "gdb.error: No source file named main.c.*" "test decode_line no source named main"
 230
 231 gdb_py_test_silent_cmd "python symtab = gdb.decode_line()" "test decode_line current location" 1
 232 gdb_test "python print (len(symtab))" "2" "test decode_line current location"
 233 gdb_test "python print (symtab\[0\])" "None" "test decode_line expression parse"
 234 gdb_test "python print (len(symtab\[1\]))" "1" "test decode_line current location"
 235
 236 if { [is_remote host] } {
 237     set python_c [string_to_regexp "python.c"]
 238 } else {
 239     set python_c [string_to_regexp "gdb.python/python.c"]
 240 }
 241 gdb_test "python print (symtab\[1\]\[0\].symtab)" ".*${python_c}" "test decode_line current location filename"
 242 gdb_test "python print (symtab\[1\]\[0\].line)" "$lineno" "test decode_line current location line number"
 243
 244 gdb_py_test_silent_cmd "python symtab = gdb.decode_line(\"python.c:26 if foo\")" "test decode_line python.c:26" 1
 245 gdb_test "python print (len(symtab))" "2" "test decode_line python.c:26 length"
 246 gdb_test "python print (symtab\[0\])" "if foo" "test decode_line expression parse"
 247 gdb_test "python print (len(symtab\[1\]))" "1" "test decode_line python.c:26 length"
 248 gdb_test "python print (symtab\[1\]\[0\].symtab)" ".*${python_c}" "test decode_line python.c:26 filename"
 249 gdb_test "python print (symtab\[1\]\[0\].line)" "26" "test decode_line python.c:26 line number"
 250
 251 gdb_test "python gdb.decode_line(\"randomfunc\")" \
 252     "gdb.error: Function \"randomfunc\" not defined.*" "test decode_line randomfunc"
 253 gdb_py_test_silent_cmd "python symtab = gdb.decode_line(\"func1\")" "test decode_line func1()" 1
 254 gdb_test "python print (len(symtab))" "2" "test decode_line func1 length"
 255 gdb_test "python print (len(symtab\[1\]))" "1" "test decode_line func1 length"
 256
 257 if { [is_remote host] } {
 258     set python_1_c [string_to_regexp "python-1.c"]
 259 } else {
 260     set python_1_c [string_to_regexp "gdb.python/python-1.c"]
 261 }
 262 gdb_test "python print (symtab\[1\]\[0\].symtab)" ".*${python_1_c}" "test decode_line func1 filename"
 263
 264 # Set a default value for func1_lineno in case we fail to fetch the line number
 265 # below.
 266 set func1_lineno "noline"
 267
 268 # Fetch the line GDB thinks func1 starts at.  This may change depending
 269 # on the architecture and on how GDB handles the prologue of the function.
 270 gdb_test_multiple "info line func1" "info line func1" {
 271     -re "Line ($decimal) of .* starts at address $hex <func1> and ends at $hex <func1\\+$decimal>\.\[\r\n\]+$gdb_prompt $" {
 272         # Fetch the line number.
 273         set func1_lineno $expect_out(1,string)
 274     }
 275 }
 276
 277 gdb_test "python print (symtab\[1\]\[0\].line)" "$func1_lineno" "test decode_line func1 line number"
 278 gdb_py_test_silent_cmd {python symtab = gdb.decode_line ("func1,func2")} \
 279     "test decode_line func1,func2" 1
 280 gdb_test {python print (symtab[0])} ",func2" "stop at comma in linespec"
 281
 282 gdb_py_test_silent_cmd "python symtab = gdb.decode_line(\"*0\")" "Test decode_line *0" 1
 283 gdb_test "python print (len(symtab))" "2" "test decode_line *0 result length"
 284 gdb_test "python print (symtab\[0\])" "None" "test decode_line *0 unparsed"
 285 gdb_test "python print (len(symtab\[1\]))" "1" "test decode_line *0 locations length"
 286 gdb_test "python print (symtab\[1\]\[0\].symtab)" "None" "test decode_line *0 filename"
 287 gdb_test "python print (symtab\[1\]\[0\].pc)" "0" "test decode_line *0 pc"
 288
 289 # gdb.write
 290 gdb_test "python print (sys.stderr)" ".*gdb.GdbOutputErrorFile (instance|object) at.*" "test stderr location"
 291 gdb_test "python print (sys.stdout)" ".*gdb.GdbOutputFile (instance|object) at.*" "test stdout location"
 292 gdb_test "python gdb.write(\"Foo\\n\")" "Foo" "test default write"
 293 gdb_test "python gdb.write(\"Error stream\\n\", stream=gdb.STDERR)" "Error stream" "test stderr write"
 294 gdb_test "python gdb.write(\"Normal stream\\n\", stream=gdb.STDOUT)" "Normal stream" "test stdout write"
 295 gdb_test "python gdb.write(\"Log stream\\n\", stream=gdb.STDLOG)" "Log stream" "test stdlog write"
 296
 297 # Turn on full stack printing for subsequent tests.
 298 gdb_py_test_silent_cmd "set python print-stack full" \
 299     "Set print-stack full for prompt tests" 1
 300
 301 # Test prompt substituion
 302
 303 gdb_py_test_multiple "prompt substitution" \
 304   "python" "" \
 305   "someCounter = 0" "" \
 306   "def prompt(current):" "" \
 307   "   global someCounter" "" \
 308   "   if (current == \"testfake \"):" "" \
 309   "      return None" "" \
 310   "   someCounter = someCounter + 1" "" \
 311   "   return \"py prompt \" + str (someCounter) + \" \"" "" \
 312   "end" ""
 313
 314 gdb_py_test_multiple "prompt substitution readline" \
 315   "python" "" \
 316   "pCounter = 0" "" \
 317   "def program_prompt(current):" "" \
 318   "   global pCounter" "" \
 319   "   if (current == \">\"):" "" \
 320   "      pCounter = pCounter + 1" "" \
 321   "      return \"python line \" + str (pCounter) + \": \"" "" \
 322   "   return None" "" \
 323   "end" ""
 324
 325 set newprompt "py prompt 1"
 326 set newprompt2 "py prompt 2"
 327 set testfake "testfake"
 328
 329 gdb_test_multiple "python gdb.prompt_hook = prompt" "set the hook" {
 330     -re "\[\r\n\]$newprompt $" {
 331         pass "set hook"
 332     }
 333 }
 334
 335 gdb_test_multiple "set prompt testfake " "set testfake prompt in GDB" {
 336     -re "\[\r\n\]$testfake $" {
 337         pass "set prompt testfake"
 338     }
 339 }
 340
 341 gdb_test_multiple "show prompt" "show testfake prompt" {
 342     -re "Gdb's prompt is \"$testfake \"..* $" {
 343         pass "show prompt shows guarded prompt"
 344     }
 345 }
 346
 347 gdb_test_multiple "set prompt blah " "set blah in GDB" {
 348     -re "\[\r\n\]$newprompt2 $" {
 349         pass "set prompt blah overriden"
 350     }
 351 }
 352
 353 gdb_test_multiple "python gdb.prompt_hook = None" "delete hook" {
 354     -re "\[\r\n\]$newprompt2 $" {
 355         pass "delete old hook"
 356     }
 357 }
 358
 359 gdb_test_multiple "set prompt $gdb_prompt " "set default prompt" {
 360     -re "\[\r\n\]$gdb_prompt $" {
 361         pass "set default prompt"
 362     }
 363 }
 364
 365 set working_dir ""
 366 gdb_test_multiple "pwd" "pwd" {
 367     -re "Working directory (.*)\\.\[\r\n\]+$gdb_prompt $" {
 368         set working_dir $expect_out(1,string)
 369     }
 370 }
 371
 372 gdb_test_multiple "python gdb.prompt_hook = program_prompt" "set the hook" {
 373     -re "\[\r\n\]$gdb_prompt $" {
 374         pass "set programming hook"
 375     }
 376 }
 377
 378 gdb_test_multiple "python" "test we ignore substituion for seconday prompts" {
 379     -re "\r\n>$" {
 380         pass "readline secondary are not substituted"
 381     }
 382 }
 383
 384 gdb_test_multiple "end" "end programming" {
 385     -re "\[\r\n\]$gdb_prompt $" {
 386         pass "end programming"
 387     }
 388 }
 389
 390 gdb_py_test_multiple "prompt substitution readline" \
 391   "python" "" \
 392   "import gdb.command.prompt" "" \
 393   "end" ""
 394
 395 gdb_test_multiple "set extended-prompt one two three " \
 396     "set basic extended prompt" {
 397     -re "\[\r\n\]one two three $" {
 398         pass "set basic extended prompt"
 399     }
 400 }
 401
 402 gdb_test_multiple "set extended-prompt \\w " \
 403     "set extended prompt working directory" {
 404     -re "\[\r\n\][string_to_regexp $working_dir] $" {
 405         pass "set extended prompt working directory"
 406     }
 407 }
 408
 409 gdb_test_multiple "set extended-prompt some param \\p{python print-stack} " \
 410     "set extended prompt parameter" {
 411     -re "\[\r\n\]some param full $" {
 412         pass "set extended prompt parameter"
 413     }
 414 }
 415
 416 # Start with a fresh gdb.
 417 clean_restart ${testfile}
 418
 419 # The following tests require execution.
 420
 421 if ![runto_main] then {
 422     fail "can't run to main"
 423     return 0
 424 }
 425
 426 # print-stack settings
 427 gdb_test "show python print-stack" \
 428     "The mode of Python stack printing on error is \"message\".*" \
 429     "Test print-stack show setting. Default is message."
 430 gdb_py_test_silent_cmd "set python print-stack full" \
 431     "Test print-stack set setting to full" 1
 432 gdb_test "show python print-stack" \
 433     "The mode of Python stack printing on error is \"full\".*" \
 434     "Test print-stack show setting to full"
 435 gdb_py_test_silent_cmd "set python print-stack none" \
 436     "Test print-stack set setting to none" 1
 437 gdb_test "show python print-stack" \
 438     "The mode of Python stack printing on error is \"none\".*" \
 439     "test print-stack show setting to none"
 440
 441 gdb_py_test_silent_cmd "set python print-stack message" \
 442     "Test print-stack set setting to message" 1
 443
 444 gdb_py_test_multiple "prompt substitution readline" \
 445   "python" "" \
 446   "pCounter = 0" "" \
 447   "def error_prompt(current):" "" \
 448   "   raise RuntimeError(\"Python exception called\")" "" \
 449   "end" ""
 450
 451 gdb_test_multiple "python gdb.prompt_hook = error_prompt" "set the hook" {
 452     -re "Python Exception (exceptions.RuntimeError|<(type 'exceptions.|class ')RuntimeError'>) Python exception called.*" {
 453         pass "set hook"
 454     }
 455 }
 456
 457 gdb_py_test_silent_cmd "python gdb.prompt_hook = None" \
 458     "set the hook to default" 1
 459
 460 gdb_py_test_silent_cmd "set python print-stack full" \
 461     "set print-stack full for prompt error test" 1
 462
 463 gdb_test_multiple "python gdb.prompt_hook = error_prompt" "set the hook" {
 464     -re "Traceback.*File.*line.*RuntimeError.*Python exception called.*" {
 465         pass "set hook"
 466     }
 467 }
 468
 469 gdb_py_test_silent_cmd "python gdb.prompt_hook = None" \
 470     "set the hook to default" 1
 471
 472 # Start with a fresh gdb.
 473 clean_restart ${testfile}
 474
 475 # The following tests require execution.
 476
 477 if ![runto_main] then {
 478     fail "can't run to main"
 479     return 0
 480 }
 481
 482 runto [gdb_get_line_number "Break at func2 call site."]
 483
 484 gdb_py_test_silent_cmd "python line = gdb.selected_frame().find_sal().line" "Get line number of func2 call site" 1
 485 gdb_test "python print (gdb.find_pc_line(gdb.selected_frame().pc()).line == line)" "True" "test find_pc_line at func2 call site"
 486
 487 gdb_py_test_silent_cmd "step" "Step into func2" 1
 488 gdb_py_test_silent_cmd "up" "Step out of func2" 1
 489
 490 gdb_test "python print (gdb.find_pc_line(gdb.selected_frame().pc()).line > line)" "True" "test find_pc_line with resume address"
 491
 492 gdb_test_no_output "set variable \$cvar1 = 23" "set convenience variable"
 493 gdb_test "python print(gdb.convenience_variable('cvar1'))" "23"
 494 gdb_test "python print(gdb.convenience_variable('cvar2'))" "None"
 495 gdb_test_no_output "python gdb.set_convenience_variable('cvar1', 89)" \
 496     "change convenience variable from python"
 497 gdb_test "python print(gdb.convenience_variable('cvar1'))" "89" \
 498     "print new value of convenience variable from python"
 499 gdb_test "print \$cvar1" " = 89" \
 500     "print new value of convenience variable from CLI"
 501 gdb_test_no_output "python gdb.set_convenience_variable('cvar3', -5)" \
 502     "make convenience variable from python"
 503 gdb_test "python print(gdb.convenience_variable('cvar3'))" "-5" \
 504     "print value of new convenience variable from python"
 505 gdb_test_no_output "python gdb.set_convenience_variable('cvar3', None)" \
 506     "reset convenience variable from python"
 507 gdb_test "python print(gdb.convenience_variable('cvar3'))" "None" \
 508     "print reset convenience variable from python"
 509 gdb_test "print \$cvar3" "= void" \
 510     "print reset convenience variable from CLI"
 511
 512 # Test PR 23669, the following would invoke the "commands" command instead of
 513 # "show commands".
 514 gdb_test "python gdb.execute(\"show commands\")" "$decimal  print \\\$cvar3.*"