gdb/testsuite/gdb.trace/change-loc.exp

   1 # Copyright 2011-2016 Free Software Foundation, Inc.
   2 # This program is free software; you can redistribute it and/or modify
   3 # it under the terms of the GNU General Public License as published by
   4 # the Free Software Foundation; either version 3 of the License, or
   5 # (at your option) any later version.
   6 #
   7 # This program is distributed in the hope that it will be useful,
   8 # but WITHOUT ANY WARRANTY; without even the implied warranty of
   9 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  10 # GNU General Public License for more details.
  11 #
  12 # You should have received a copy of the GNU General Public License
  13 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  14
  15 load_lib "trace-support.exp"
  16
  17 if {[skip_shlib_tests]} {
  18     return 0
  19 }
  20
  21 standard_testfile
  22 set libfile1 "change-loc-1"
  23 set libfile2 "change-loc-2"
  24 set executable $testfile
  25 set libsrc1 $srcdir/$subdir/$libfile1.c
  26 set libsrc2 $srcdir/$subdir/$libfile2.c
  27 set lib_sl1 [standard_output_file $libfile1.sl]
  28 set lib_sl2 [standard_output_file $libfile2.sl]
  29
  30 set lib_opts debug
  31
  32 if [get_compiler_info] {
  33     return -1
  34 }
  35
  36 # Some targets have leading underscores on assembly symbols.
  37 set additional_flags [list debug shlib=$lib_sl1 shlib_load [gdb_target_symbol_prefix_flags]]
  38
  39 if { [gdb_compile_shlib $libsrc1 $lib_sl1 $lib_opts] != ""
  40      || [gdb_compile_shlib $libsrc2 $lib_sl2 $lib_opts] != ""
  41      || [gdb_compile $srcdir/$subdir/$srcfile $binfile executable $additional_flags] != ""} {
  42     untested "failed to compile"
  43     return -1
  44 }
  45
  46 clean_restart $executable
  47
  48 gdb_load_shlib $lib_sl1
  49 gdb_load_shlib $lib_sl2
  50
  51 if ![runto_main] {
  52     fail "can't run to main to check for trace support"
  53     return -1
  54 }
  55
  56 if { ![gdb_target_supports_trace] } then {
  57     unsupported "current target does not support trace"
  58     return -1
  59 }
  60
  61
  62 # Set tracepoint during tracing experiment.
  63
  64 proc tracepoint_change_loc_1 { trace_type } {
  65     with_test_prefix "1 $trace_type" {
  66         global testfile
  67         global srcfile
  68         global pcreg
  69         global gdb_prompt
  70
  71         clean_restart ${testfile}
  72         if ![runto_main] {
  73             fail "can't run to main"
  74             return -1
  75         }
  76         gdb_test_no_output "delete break 1"
  77
  78         # Set a tracepoint we'll never meet.  Just to avoid the
  79         # complain after type `tstart' later.
  80         gdb_test "next" ".*"
  81         gdb_test "trace main" \
  82             "Tracepoint \[0-9\] at.* file .*$srcfile, line.*" \
  83             "set tracepoint on main"
  84
  85         gdb_test "break marker" \
  86             "Breakpoint.*at.* file .*$srcfile, line.*" \
  87             "breakpoint on marker"
  88
  89         gdb_test_no_output "tstart"
  90
  91         gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
  92             "continue to marker 1"
  93         # Set a tracepoint during tracing.
  94         set test "set tracepoint on set_tracepoint"
  95         gdb_test_multiple "${trace_type} set_tracepoint" $test {
  96             -re "Target returns error code .* too far .*$gdb_prompt $" {
  97                 if [string equal $trace_type "ftrace"] {
  98                     # The target was unable to install the fast tracepoint
  99                     # (e.g., jump pad too far from tracepoint).
 100                     pass "$test (too far)"
 101                 } else {
 102                     fail $test
 103                 }
 104             }
 105             -re "\r\n$gdb_prompt $" {
 106                 pass $test
 107             }
 108         }
 109
 110         gdb_trace_setactions "set action for tracepoint" "" \
 111             "collect \$$pcreg" "^$"
 112
 113         # tracepoint has two locations after shlib change-loc-1 is loaded.
 114         gdb_test "info trace" \
 115             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 116 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*4\.1.* in func4.*4\.2.* in func4.*" \
 117             "tracepoint with two locations"
 118
 119         set test "continue to marker 2"
 120         gdb_test_multiple "continue" $test {
 121             -re "Target returns error code .* too far .*$gdb_prompt $" {
 122                 if [string equal $trace_type "ftrace"] {
 123                     # Expected if the target was unable to install the
 124                     # fast tracepoint (e.g., jump pad too far from
 125                     # tracepoint).
 126                     pass "$test (too far)"
 127                     # Skip the rest of the tests.
 128                     return
 129                 } else {
 130                     fail "continue to marker 2"
 131                     fail $test
 132                 }
 133
 134             }
 135             -re ".*Breakpoint.*marker.*at.*$srcfile.*$gdb_prompt $" {
 136                 pass "continue to marker 2"
 137             }
 138         }
 139
 140         # tracepoint has three locations after shlib change-loc-2 is
 141         # loaded.
 142         gdb_test "info trace" \
 143             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 144 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*4\.1.* in func4.*4\.2.* in func4.*4\.3.* in func4 .*" \
 145             "tracepoint with three locations"
 146
 147         gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
 148             "continue to marker 3"
 149
 150         # shlib is unloaded, there are still three locations, but one
 151         # is pending.
 152         gdb_test "info trace" \
 153             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 154 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*
 155 (4\.\[1-3].* in func4.*\tinstalled on target.*){2}" \
 156             "tracepoint with two locations - installed (unload)"
 157
 158         gdb_test "info trace" \
 159             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 160 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*
 161 4\.\[1-3].* \<PENDING\>\[\t \]+set_tracepoint.*" \
 162             "tracepoint with two locations - pending (unload)"
 163
 164         gdb_test_no_output "tstop"
 165
 166         gdb_test "tfind" "Found trace frame 0, tracepoint 4.*" \
 167             "tfind frame 0"
 168         gdb_test "tfind" \
 169             "Target failed to find requested trace frame\\..*"
 170     }
 171 }
 172
 173 # Set pending tracepoint.
 174
 175 proc tracepoint_change_loc_2 { trace_type } {
 176     with_test_prefix "2 $trace_type" {
 177         global srcdir
 178         global srcfile
 179         global subdir
 180         global pcreg
 181         global binfile
 182         global gdb_prompt
 183
 184         gdb_exit
 185         gdb_start
 186         gdb_reinitialize_dir $srcdir/$subdir
 187
 188         gdb_test_multiple "${trace_type} set_tracepoint" "set pending tracepoint" {
 189             -re ".*Make \(|fast \)tracepoint pending.*y or \\\[n\\\]. $" {
 190                 gdb_test "y" "\(Fast t|T\)racepoint.*set_tracepoint.*pending." "set pending tracepoint"
 191             }
 192         }
 193
 194         gdb_trace_setactions "set action for tracepoint" "" \
 195             "collect \$$pcreg" "^$"
 196
 197         # tracepoint has no location information now.  Make sure nothing
 198         # else is displayed.
 199         gdb_test "info trace" \
 200             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 201 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*PENDING.*set_tracepoint\r\n\[\t \]+collect \\$$pcreg\r" \
 202             "single pending tracepoint info (without symbols)"
 203
 204         gdb_load ${binfile}
 205         # tracepoint has one location after executable is loaded.
 206         gdb_test "info trace" \
 207             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 208 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*func4.*" \
 209             "tracepoint with one location"
 210
 211         set main_bp 0
 212         gdb_test_multiple "break main" "set breakpoint on main" {
 213             -re "Breakpoint (\[0-9\]*) at .*, line.*$gdb_prompt $" {
 214                 set main_bp $expect_out(1,string)
 215             }
 216         }
 217         gdb_run_cmd
 218
 219         gdb_test "" \
 220             ".*Breakpoint.*main.*at.*$srcfile.*" \
 221             "run to main"
 222         gdb_test_no_output "delete break $main_bp"
 223
 224         # tracepoint has two locations after shlib change-loc-1 is loaded.
 225         gdb_test "info trace" \
 226             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 227 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*1\.1.* in func4.*1\.2.* in func4.*" \
 228             "tracepoint with two locations"
 229
 230         gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
 231             "breakpoint on marker"
 232
 233         # tracepoint with two locations will be downloaded and installed.
 234         set test "tstart"
 235         gdb_test_multiple "tstart" $test {
 236             -re "^tstart\r\n$gdb_prompt $" {
 237                 pass "tstart"
 238             }
 239             -re "Target returns error code .* too far .*$gdb_prompt $" {
 240                 if [string equal $trace_type "ftrace"] {
 241                     # The target was unable to install the fast tracepoint
 242                     # (e.g., jump pad too far from tracepoint).
 243                     pass "$test (too far)"
 244                     # Skip the rest of the tests.
 245                     return
 246                 } else {
 247                     fail $test
 248                 }
 249             }
 250         }
 251
 252         gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
 253             "continue to marker 1"
 254
 255         gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
 256             "continue to marker 2"
 257
 258         # tracepoint has three locations after shlib change-loc-2 is loaded.
 259         gdb_test "info trace" \
 260             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 261 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*1\.1.* in func4.*1\.2.* in func4.*1\.3.* in func4 .*" \
 262             "tracepoint with three locations"
 263
 264         gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
 265             "continue to marker 3"
 266
 267         # shlib is unloaded, there are still three locations, but one is pending.
 268         gdb_test "info trace" \
 269             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 270 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*
 271 (1\.\[1-3].* in func4.*\tinstalled on target.*){2}" \
 272             "tracepoint with two locations - installed (unload)"
 273
 274         gdb_test "info trace" \
 275             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 276 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*\<MULTIPLE\>.*
 277 1\.\[1-3].* \<PENDING\>\[\t \]+set_tracepoint.*" \
 278             "tracepoint with two locations - pending (unload)"
 279
 280         gdb_test_no_output "tstop"
 281
 282         gdb_test "tfind" "Found trace frame 0, tracepoint 1.*" "tfind frame 0"
 283         gdb_test "tfind" "Found trace frame 1, tracepoint 1.*" "tfind frame 1"
 284         gdb_test "tfind" "Found trace frame 2, tracepoint 1.*" "tfind frame 2"
 285         gdb_test "tfind" "Target failed to find requested trace frame\\..*"
 286     }
 287 }
 288
 289 # Test that setting a tracepoint while the trace experiment is ongoing
 290 # doesn't work when we force-disable the InstallInTrace RSP feature.
 291
 292 proc tracepoint_install_in_trace_disabled { trace_type } {
 293     with_test_prefix "InstallInTrace disabled: $trace_type" {
 294         global testfile
 295         global srcfile
 296         global pcreg
 297         global gdb_prompt
 298
 299         clean_restart ${testfile}
 300         if ![runto_main] {
 301             fail "can't run to main"
 302             return -1
 303         }
 304
 305         # This test only makes sense with the remote target.
 306         if ![gdb_is_target_remote] {
 307             return
 308         }
 309
 310         gdb_test_no_output "delete break 1"
 311
 312         # Set a tracepoint we'll never meet.  Just to avoid the
 313         # complain after `tstart' later.
 314         gdb_test "next" ".*"
 315         gdb_test "trace main" \
 316             "Tracepoint \[0-9\] at.* file .*$srcfile, line.*" \
 317             "set tracepoint on main"
 318
 319         gdb_test "break marker" "Breakpoint.*at.* file .*$srcfile, line.*" \
 320             "breakpoint on marker"
 321
 322         gdb_test_no_output "tstart"
 323
 324         # Force-disable the InstallInTrace RSP feature.
 325         gdb_test_no_output "set remote install-in-trace-packet off"
 326
 327         # Set a tracepoint while a trace experiment is ongoing.
 328         gdb_test "${trace_type} set_tracepoint" \
 329             "racepoint .* at .* set_tracepoint.*" \
 330             "set tracepoint on set_tracepoint"
 331
 332         gdb_trace_setactions "set action for tracepoint" "" \
 333             "collect \$$pcreg" "^$"
 334
 335         # Make sure the tracepoint is _not_ installed on the target.
 336         gdb_test "info trace" \
 337             "Num     Type\[ \]+Disp Enb Address\[ \]+What.*
 338 \[0-9\]+\[\t \]+\(|fast \)tracepoint\[ \]+keep y.*installed on target.*\<MULTIPLE\>.*4\.1.* in func4.*not installed on target.*4\.2.* in func4.*not installed on target.*" \
 339             "tracepoint is not installed"
 340
 341         gdb_test "continue" ".*Breakpoint.*marker.*at.*$srcfile.*" \
 342             "continue to marker"
 343
 344         gdb_test_no_output "tstop"
 345
 346         # Nothing should have been collected.
 347         gdb_test "tfind" "Target failed to find requested trace frame\\..*"
 348     }
 349 }
 350
 351 tracepoint_change_loc_1 "trace"
 352 tracepoint_change_loc_2 "trace"
 353 tracepoint_install_in_trace_disabled "trace"
 354
 355 # Re-compile test case with IPA.
 356 set libipa [get_in_proc_agent]
 357 gdb_load_shlib $libipa
 358
 359 if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile executable \
 360           [list debug nowarnings shlib=$libipa shlib=$lib_sl1 shlib_load] ] != "" } {
 361     untested change-loc.exp
 362     return -1
 363 }
 364
 365 tracepoint_change_loc_1 "ftrace"
 366 tracepoint_change_loc_2 "ftrace"
 367 tracepoint_install_in_trace_disabled "ftrace"