1 # Copyright 1998, 2007, 2008 Free Software Foundation, Inc.
3 # This program is free software; you can redistribute it and/or modify
4 # it under the terms of the GNU General Public License as published by
5 # the Free Software Foundation; either version 3 of the License, or
6 # (at your option) any later version.
8 # This program is distributed in the hope that it will be useful,
9 # but WITHOUT ANY WARRANTY; without even the implied warranty of
10 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 # GNU General Public License for more details.
13 # You should have received a copy of the GNU General Public License
14 # along with this program. If not, see <http://www.gnu.org/licenses/>.
16 # This file was written by Michael Snyder (msnyder@cygnus.com)
18 load_lib "trace-support.exp";
30 if [istarget "m68k-*-elf"] then {
31 load_lib "emc-support.exp";
32 set srcfile gdb_c_test.c
33 set binfile [board_info target d490_binfile];
34 gdb_test "set remotetimeout 6" "" ""
36 gdb_target_monitor $binfile
37 # Give a TSTOP and ignore errors, to make sure any previous trace is off
38 gdb_test "tstop" "" ""
39 gdb_test "tfind none" "" ""
40 send_gdb "compare-sections CS\n"
42 -re "MIS-MATCHED.*$gdb_prompt $" {
45 all tests in this module will fail.";
47 -re ".*$gdb_prompt $" { }
50 set testfile "actions"
51 set srcfile ${testfile}.c
52 set binfile $objdir/$subdir/$testfile
53 if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
54 executable {debug nowarnings}] != "" } {
59 gdb_test "tstop" "" ""
60 gdb_test "tfind none" "" ""
63 gdb_reinitialize_dir $srcdir/$subdir
65 # We generously give ourselves one "pass" if we successfully
66 # detect that this test cannot be run on this target!
67 if { ![gdb_target_supports_trace] } then {
68 pass "Current target does not support trace"
75 # If testing on a remote host, download the source file.
76 # remote_download host $srcdir/$subdir/$srcfile
79 # test general reporting of trace experiment results
96 set gdb_recursion_test_baseline [gdb_find_recursion_test_baseline $srcfile];
97 if { $gdb_recursion_test_baseline == -1 } {
98 fail "Could not find gdb_recursion_test function"
102 send_gdb "list $gdb_recursion_test_baseline, +12\n"
104 -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 1 " {
105 set testline1 $expect_out(1,string)
108 -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 2 " {
109 set testline2 $expect_out(1,string)
112 -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 3 " {
113 set testline3 $expect_out(1,string)
116 -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 4 " {
117 set testline4 $expect_out(1,string)
120 -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 5 " {
121 set testline5 $expect_out(1,string)
124 -re "\[\r\n\](\[0-9\]+)\[^\r\n\]+gdbtestline 6 " {
125 set testline6 $expect_out(1,string)
128 -re ".*$gdb_prompt $" {
129 if { ($testline1 == 0) || ($testline2 == 0) || ($testline3 == 0) || ($testline4 == 0) || ($testline5 == 0) || ($testline6 == 0) } {
132 all tests in this module will fail."
138 all tests in this module will fail."
143 # Setup trace experiment. This will involve:
144 # 1) a tracepoint where nothing is collected
145 # 2) a tracepoint where only regs are collected
146 # 3) a tracepoint where only args are collected
147 # 4) a tracepoint where only locals are collected
148 # 5) a tracepoint where some amount of stack memory is collected.
149 # 6) a tracepoint where some expressions are collected.
152 gdb_delete_tracepoints
153 set tdp1 [gdb_gettpnum $testline1]
154 set tdp2 [gdb_gettpnum $testline2]
155 set tdp3 [gdb_gettpnum $testline3]
156 set tdp4 [gdb_gettpnum $testline4]
157 set tdp5 [gdb_gettpnum $testline5]
158 set tdp6 [gdb_gettpnum $testline6]
160 if { $tdp1 <= 0 || $tdp2 <= 0 || $tdp3 <= 0 || \
161 $tdp4 <= 0 || $tdp5 <= 0 || $tdp6 <= 0 } then {
162 fail "setting tracepoints failed"
166 gdb_trace_setactions "9.x: setup TP to collect regs" \
168 "collect \$regs" "^$"
171 gdb_trace_setactions "9.x: setup TP to collect args" \
173 "collect \$args" "^$"
175 gdb_trace_setactions "9.x: setup TP to collect locals" \
177 "collect \$locs" "^$"
179 gdb_trace_setactions "9.x: setup TP to collect stack memory" \
181 "collect \$fp, \*\(void \*\*\) \$sp @ 64" "^$"
183 gdb_trace_setactions "9.x: setup TP to collect expressions" \
185 "collect gdb_char_test, gdb_short_test, gdb_long_test" "^$"
187 gdb_test "tstart" "" ""
189 if [istarget "m68k-*-elf"] then {
190 gdb_emclaptop_command "85,$arg1,$arg2,$arg3,$arg4,$arg5,$arg6"
194 gdb_test "break end" "" ""
195 gdb_test "continue" \
196 "Continuing.*Breakpoint $decimal, end.*" \
197 "run trace experiment"
200 gdb_test "tstop" "" ""
203 # 9.1 test the tdump command
208 gdb_tfind_test "9.1: init: make sure not debugging any trace frame" "none" "-1"
210 gdb_tfind_test "9.1: find frame for TP $tdp1" "tracepoint $tdp1" \
211 "\$tracepoint" "$tdp1"
213 # Nothing was collected at tdp1, so this tdump should be empty.
215 "Data collected at tracepoint $tdp1, trace frame $decimal:" \
216 "9.1: tdump, nothing collected"
218 gdb_tfind_test "9.1: find frame for TP $tdp2" "tracepoint $tdp2" \
219 "\$tracepoint" "$tdp2"
221 # regs were collected at tdp2.
222 # How to match for the output of "info registers" on an unknown architecture?
223 # For now, assume that every architecture has a register called "pc".
226 "9.1: tdump, regs collected"
228 gdb_tfind_test "9.1: find frame for TP $tdp3" "tracepoint $tdp3" \
229 "\$tracepoint" "$tdp3"
231 # args were collected at tdp3
233 "depth = 3.*q1 = 2.*q2 = 2.*q3 = 3.*q4 = 4.*q5 = 5.*q6 = 6" \
234 "9.1: tdump, args collected"
236 gdb_tfind_test "9.1: find frame for TP $tdp4" "tracepoint $tdp4" \
237 "\$tracepoint" "$tdp4"
239 # locals were collected at tdp4
242 "9.1: tdump, locals collected"
244 gdb_tfind_test "9.1: find frame for TP $tdp5" "tracepoint $tdp5" \
245 "\$tracepoint" "$tdp5"
247 # stack was collected at tdp5, plus the frame pointer
249 ".fp = .*sp @ 64 = .*" \
250 "9.1: tdump, memrange collected"
252 gdb_tfind_test "9.1: find frame for TP $tdp6" "tracepoint $tdp6" \
253 "\$tracepoint" "$tdp6"
255 # globals were collected at tdp6
257 "gdb_char_test = 1.*gdb_short_test = 2.*gdb_long_test = 3" \
258 "9.1: tdump, global variables collected"
260 # 9.2 test tdump with arguments
261 # [no go, tdump doesn't have any arguments]
265 gdb_test "help tdump" "Print everything collected at the current.*" \
275 gdb_tfind_test "11.x, 12.1: find start frame" "start" "0"
278 # 11.x test built-in trace variables $trace_frame, $trace_line etc.
281 gdb_test "printf \"x %d x\\n\", \$trace_frame" "x 0 x" \
282 "11.1: test \$trace_frame"
284 gdb_test "printf \"x %d x\\n\", \$tracepoint" "x $tdp1 x" \
285 "11.2: test \$tracepoint"
287 gdb_test "printf \"x %d x\\n\", \$trace_line" "x $testline1 x" \
288 "11.3: test \$trace_line"
290 send_gdb "print \$trace_file\n"
292 -re "\\$\[0-9\]+ = \"$srcfile\"\[\r\n\]+$gdb_prompt $" {
293 pass "11.4: test \$trace_file"
295 -re "\\$\[0-9\]+ = \"$srcdir/$subdir/$srcfile\"\[\r\n\]+$gdb_prompt $" {
296 pass "11.4: test \$trace_file"
298 -re "$gdb_prompt $" {
299 fail "11.4: test \$trace_file"
302 fail "11.4: test \$trace_file (timeout)"
306 #gdb_test "print \$trace_file" "\"$srcdir/$subdir/$srcfile\"" \
307 # "11.4: test \$trace_file"
310 # 12.x test report generation using arbitrary GDB commands, loops etc.
313 send_gdb "while \$trace_frame != -1\n output \$trace_file\n printf \", line \%d \(tracepoint #\%d\)\\n\", \$trace_line, \$tracepoint\n tfind\n end\n"
315 -re " line $testline1 .tracepoint .$tdp1" {
316 set linecount1 [expr $linecount1 + 1]
319 -re " line $testline2 .tracepoint .$tdp2" {
320 set linecount2 [expr $linecount2 + 1]
323 -re " line $testline3 .tracepoint .$tdp3" {
324 set linecount3 [expr $linecount3 + 1]
327 -re " line $testline4 .tracepoint .$tdp4" {
328 set linecount4 [expr $linecount4 + 1]
331 -re " line $testline5 .tracepoint .$tdp5" {
332 set linecount5 [expr $linecount5 + 1]
335 -re " line $testline6 .tracepoint .$tdp6" {
336 set linecount6 [expr $linecount6 + 1]
339 -re ".*$gdb_prompt $" {
340 if { ($linecount1 < 4) || ($linecount2 < 4) || ($linecount3 < 4) || ($linecount4 < 4) || ($linecount5 < 4) || ($linecount6 < 4) } {
341 fail "12.1: trace report #1"
343 pass "12.1: trace report #1"
347 fail "12.1: trace report #1 (timeout)"
351 gdb_tfind_test "12.2: find first TDP #2 frame" "tracepoint $tdp2" \
352 "\$tracepoint" "$tdp2"
356 send_gdb "while \$trace_frame != -1\n printf \"tracepoint #\%d, FP 0x\%08x, SP 0x\%08x, PC 0x%08x\\n\", \$tracepoint, \$fp, \$sp, \$pc\n tfind tracepoint\n end\n"
358 -re "tracepoint #$tdp2, FP $hex, SP $hex, PC $hex" {
359 set linecount2 [expr $linecount2 + 1]
362 -re ".*$gdb_prompt $" {
363 if { ($linecount2 < 4) } {
364 fail "12.2: trace report #2"
366 pass "12.2: trace report #2"
370 fail "12.2: trace report #2 (timeout)"
374 gdb_tfind_test "12.3: find first TDP #3 frame" "tracepoint $tdp3" \
375 "\$tracepoint" "$tdp3"
379 send_gdb "while \$trace_frame != -1\n printf \"TDP #\%d, frame \%d: depth = \%d, q1 = \%d\\n\", \$tracepoint, \$trace_frame, depth, q1\n tfind tracepoint\n end\n"
381 -re "TDP #$tdp3, frame $decimal: depth = $decimal, q1 = $decimal" {
382 set linecount3 [expr $linecount3 + 1]
385 -re ".*$gdb_prompt $" {
386 if { ($linecount3 < 4) } {
387 fail "12.3: trace report #3"
389 pass "12.3: trace report #3"
393 fail "12.3: trace report #3 (timeout)"
397 gdb_tfind_test "12.4: find first TDP #6 frame" "tracepoint $tdp6" \
398 "\$tracepoint" "$tdp6"
402 send_gdb "while \$trace_frame != -1\n printf \"TDP #\%d, frame %d: char_test = \%d, long_test = \%d\\n\", \$tracepoint, \$trace_frame, gdb_char_test, gdb_long_test\n tfind tracepoint\n end\n"
404 -re "TDP #$tdp6, frame $decimal: char_test = $arg1, long_test = $arg3" {
405 set linecount6 [expr $linecount6 + 1]
408 -re ".*$gdb_prompt $" {
409 if { ($linecount6 < 4) } {
410 fail "12.4: trace report #4"
412 pass "12.4: trace report #4"
416 fail "12.4: trace report #4 (timeout)"
421 gdb_tfind_test "finished: make sure not debugging any trace frame" "none" "-1"