gdb/testsuite/lib/mi-support.exp

   1 # Copyright 1999, 2000, 2002, 2003, 2004, 2005, 2007, 2008
   2 # Free Software Foundation, Inc.
   3
   4 # This program is free software; you can redistribute it and/or modify
   5 # it under the terms of the GNU General Public License as published by
   6 # the Free Software Foundation; either version 3 of the License, or
   7 # (at your option) any later version.
   8 #
   9 # This program is distributed in the hope that it will be useful,
  10 # but WITHOUT ANY WARRANTY; without even the implied warranty of
  11 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12 # GNU General Public License for more details.
  13 #
  14 # You should have received a copy of the GNU General Public License
  15 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
  16
  17 # Please email any bugs, comments, and/or additions to this file to:
  18 # bug-gdb@prep.ai.mit.edu
  19
  20 # This file was based on a file written by Fred Fish. (fnf@cygnus.com)
  21
  22 # Test setup routines that work with the MI interpreter.
  23
  24 # The variable mi_gdb_prompt is a regexp which matches the gdb mi prompt.
  25 # Set it if it is not already set.
  26 global mi_gdb_prompt
  27 if ![info exists mi_gdb_prompt] then {
  28     set mi_gdb_prompt "\[(\]gdb\[)\] \r\n"
  29 }
  30
  31 global mi_inferior_spawn_id
  32 global mi_inferior_tty_name
  33
  34 set MIFLAGS "-i=mi"
  35
  36 #
  37 # mi_gdb_exit -- exit the GDB, killing the target program if necessary
  38 #
  39 proc mi_gdb_exit {} {
  40     catch mi_uncatched_gdb_exit
  41 }
  42
  43 proc mi_uncatched_gdb_exit {} {
  44     global GDB
  45     global GDBFLAGS
  46     global verbose
  47     global gdb_spawn_id;
  48     global gdb_prompt
  49     global mi_gdb_prompt
  50     global MIFLAGS
  51
  52     gdb_stop_suppressing_tests;
  53
  54     if { [info procs sid_exit] != "" } {
  55         sid_exit
  56     }
  57
  58     if ![info exists gdb_spawn_id] {
  59         return;
  60     }
  61
  62     verbose "Quitting $GDB $GDBFLAGS $MIFLAGS"
  63
  64     if { [is_remote host] && [board_info host exists fileid] } {
  65         send_gdb "999-gdb-exit\n";
  66         gdb_expect 10 {
  67             -re "y or n" {
  68                 send_gdb "y\n";
  69                 exp_continue;
  70             }
  71             -re "Undefined command.*$gdb_prompt $" {
  72                 send_gdb "quit\n"
  73                 exp_continue;
  74             }
  75             -re "DOSEXIT code" { }
  76             default { }
  77         }
  78     }
  79
  80     if ![is_remote host] {
  81         remote_close host;
  82     }
  83     unset gdb_spawn_id
  84 }
  85
  86 #
  87 # default_mi_gdb_start [INFERIOR_PTY] -- start gdb running, default procedure
  88 #
  89 # INFERIOR_PTY should be set to separate-inferior-tty to have the inferior work
  90 # with it's own PTY. If set to same-inferior-tty, the inferior shares GDB's PTY.
  91 # The default value is same-inferior-tty.
  92 #
  93 # When running over NFS, particularly if running many simultaneous
  94 # tests on different hosts all using the same server, things can
  95 # get really slow.  Give gdb at least 3 minutes to start up.
  96 #
  97 proc default_mi_gdb_start { args } {
  98     global verbose
  99     global GDB
 100     global GDBFLAGS
 101     global gdb_prompt
 102     global mi_gdb_prompt
 103     global timeout
 104     global gdb_spawn_id;
 105     global MIFLAGS
 106
 107     gdb_stop_suppressing_tests;
 108     set inferior_pty no-tty
 109
 110     if { [llength $args] == 1} {
 111         set inferior_pty [lindex $args 0]
 112     }
 113
 114     set separate_inferior_pty [string match $inferior_pty separate-inferior-tty]
 115
 116     # Start SID.
 117     if { [info procs sid_start] != "" } {
 118         verbose "Spawning SID"
 119         sid_start
 120     }
 121
 122     verbose "Spawning $GDB -nw $GDBFLAGS $MIFLAGS"
 123
 124     if [info exists gdb_spawn_id] {
 125         return 0;
 126     }
 127
 128     if ![is_remote host] {
 129         if { [which $GDB] == 0 } then {
 130             perror "$GDB does not exist."
 131             exit 1
 132         }
 133     }
 134
 135     # Create the new PTY for the inferior process.
 136     if { $separate_inferior_pty } {
 137         spawn -pty
 138         global mi_inferior_spawn_id
 139         global mi_inferior_tty_name
 140         set mi_inferior_spawn_id $spawn_id
 141         set mi_inferior_tty_name $spawn_out(slave,name)
 142     }
 143
 144     set res [remote_spawn host "$GDB -nw $GDBFLAGS $MIFLAGS [host_info gdb_opts]"];
 145     if { $res < 0 || $res == "" } {
 146         perror "Spawning $GDB failed."
 147         return 1;
 148     }
 149     gdb_expect {
 150         -re "~\"GNU.*\r\n~\".*$mi_gdb_prompt$" {
 151             # We have a new format mi startup prompt.  If we are
 152             # running mi1, then this is an error as we should be
 153             # using the old-style prompt.
 154             if { $MIFLAGS == "-i=mi1" } {
 155                 perror "(mi startup) Got unexpected new mi prompt."
 156                 remote_close host;
 157                 return -1;
 158             }
 159             verbose "GDB initialized."
 160         }
 161         -re "\[^~\].*$mi_gdb_prompt$" {
 162             # We have an old format mi startup prompt.  If we are
 163             # not running mi1, then this is an error as we should be
 164             # using the new-style prompt.
 165             if { $MIFLAGS != "-i=mi1" } {
 166                 perror "(mi startup) Got unexpected old mi prompt."
 167                 remote_close host;
 168                 return -1;
 169             }
 170             verbose "GDB initialized."
 171         }
 172         -re ".*unrecognized option.*for a complete list of options." {
 173             untested "Skip mi tests (not compiled with mi support)."
 174             remote_close host;
 175             return -1;
 176         }
 177         -re ".*Interpreter `mi' unrecognized." {
 178             untested "Skip mi tests (not compiled with mi support)."
 179             remote_close host;
 180             return -1;
 181         }
 182         timeout {
 183             perror "(timeout) GDB never initialized after 10 seconds."
 184             remote_close host;
 185             return -1
 186         }
 187     }
 188     set gdb_spawn_id -1;
 189
 190     # FIXME: mi output does not go through pagers, so these can be removed.
 191     # force the height to "unlimited", so no pagers get used
 192     send_gdb "100-gdb-set height 0\n"
 193     gdb_expect 10 {
 194         -re ".*100-gdb-set height 0\r\n100\\\^done\r\n$mi_gdb_prompt$" {
 195             verbose "Setting height to 0." 2
 196         }
 197         timeout {
 198             warning "Couldn't set the height to 0"
 199         }
 200     }
 201     # force the width to "unlimited", so no wraparound occurs
 202     send_gdb "101-gdb-set width 0\n"
 203     gdb_expect 10 {
 204         -re ".*101-gdb-set width 0\r\n101\\\^done\r\n$mi_gdb_prompt$" {
 205             verbose "Setting width to 0." 2
 206         }
 207         timeout {
 208             warning "Couldn't set the width to 0."
 209         }
 210     }
 211     # If allowing the inferior to have its own PTY then assign the inferior
 212     # its own terminal device here.
 213     if { $separate_inferior_pty } {
 214         send_gdb "102-inferior-tty-set $mi_inferior_tty_name\n"
 215         gdb_expect 10 {
 216             -re ".*102\\\^done\r\n$mi_gdb_prompt$" {
 217                 verbose "redirect inferior output to new terminal device."
 218             }
 219             timeout {
 220                 warning "Couldn't redirect inferior output." 2
 221             }
 222         }
 223     }
 224
 225     detect_async
 226
 227     return 0;
 228 }
 229
 230 #
 231 # Overridable function. You can override this function in your
 232 # baseboard file.
 233 #
 234 proc mi_gdb_start { args } {
 235   return [default_mi_gdb_start $args]
 236 }
 237
 238 # Many of the tests depend on setting breakpoints at various places and
 239 # running until that breakpoint is reached.  At times, we want to start
 240 # with a clean-slate with respect to breakpoints, so this utility proc
 241 # lets us do this without duplicating this code everywhere.
 242 #
 243
 244 proc mi_delete_breakpoints {} {
 245     global mi_gdb_prompt
 246
 247 # FIXME: The mi operation won't accept a prompt back and will use the 'all' arg
 248     send_gdb "102-break-delete\n"
 249     gdb_expect 30 {
 250          -re "Delete all breakpoints.*y or n.*$" {
 251             send_gdb "y\n";
 252             exp_continue
 253          }
 254          -re "102-break-delete\r\n102\\\^done\r\n$mi_gdb_prompt$" {
 255             # This happens if there were no breakpoints
 256          }
 257          timeout { perror "Delete all breakpoints in mi_delete_breakpoints (timeout)" ; return }
 258     }
 259
 260 # The correct output is not "No breakpoints or watchpoints." but an
 261 # empty BreakpointTable. Also, a query is not acceptable with mi.
 262     send_gdb "103-break-list\n"
 263     gdb_expect 30 {
 264          -re "103-break-list\r\n103\\\^done,BreakpointTable=\{\}\r\n$mi_gdb_prompt$" {}
 265          -re "103-break-list\r\n103\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[\\\]\}\r\n$mi_gdb_prompt$" {}
 266          -re "103-break-list\r\n103\\\^doneNo breakpoints or watchpoints.\r\n\r\n$mi_gdb_prompt$" {warning "Unexpected console text received"}
 267          -re "$mi_gdb_prompt$" { perror "Breakpoints not deleted" ; return }
 268          -re "Delete all breakpoints.*or n.*$" {
 269             warning "Unexpected prompt for breakpoints deletion";
 270             send_gdb "y\n";
 271             exp_continue
 272         }
 273          timeout { perror "-break-list (timeout)" ; return }
 274     }
 275 }
 276
 277 proc mi_gdb_reinitialize_dir { subdir } {
 278     global mi_gdb_prompt
 279     global MIFLAGS
 280
 281     global suppress_flag
 282     if { $suppress_flag } {
 283         return
 284     }
 285
 286     if [is_remote host] {
 287         return "";
 288     }
 289
 290     if { $MIFLAGS == "-i=mi1" } {
 291       send_gdb "104-environment-directory\n"
 292       gdb_expect 60 {
 293         -re ".*Reinitialize source path to empty.*y or n. " {
 294             warning "Got confirmation prompt for dir reinitialization."
 295             send_gdb "y\n"
 296             gdb_expect 60 {
 297                 -re "$mi_gdb_prompt$" {}
 298                 timeout {error "Dir reinitialization failed (timeout)"}
 299             }
 300         }
 301         -re "$mi_gdb_prompt$" {}
 302         timeout {error "Dir reinitialization failed (timeout)"}
 303       }
 304     } else {
 305       send_gdb "104-environment-directory -r\n"
 306       gdb_expect 60 {
 307         -re "104\\\^done,source-path=.*\r\n$mi_gdb_prompt$" {}
 308         -re "$mi_gdb_prompt$" {}
 309         timeout {error "Dir reinitialization failed (timeout)"}
 310       }
 311     }
 312
 313     send_gdb "105-environment-directory $subdir\n"
 314     gdb_expect 60 {
 315         -re "Source directories searched.*$mi_gdb_prompt$" {
 316             verbose "Dir set to $subdir"
 317         }
 318         -re "105\\\^done.*\r\n$mi_gdb_prompt$" {
 319             # FIXME: We return just the prompt for now.
 320             verbose "Dir set to $subdir"
 321             # perror "Dir \"$subdir\" failed."
 322         }
 323     }
 324 }
 325
 326 # Send GDB the "target" command.
 327 # FIXME: Some of these patterns are not appropriate for MI.  Based on
 328 # config/monitor.exp:gdb_target_command.
 329 proc mi_gdb_target_cmd { targetname serialport } {
 330     global mi_gdb_prompt
 331
 332     set serialport_re [string_to_regexp $serialport]
 333     for {set i 1} {$i <= 3} {incr i} {
 334         send_gdb "47-target-select $targetname $serialport\n"
 335         gdb_expect 60 {
 336             -re "47\\^connected.*$mi_gdb_prompt$" {
 337                 verbose "Set target to $targetname";
 338                 return 0;
 339             }
 340             -re "unknown host.*$mi_gdb_prompt" {
 341                 verbose "Couldn't look up $serialport"
 342             }
 343             -re "Couldn't establish connection to remote.*$mi_gdb_prompt$" {
 344                 verbose "Connection failed";
 345             }
 346             -re "Remote MIPS debugging.*$mi_gdb_prompt$" {
 347                 verbose "Set target to $targetname";
 348                 return 0;
 349             }
 350             -re "Remote debugging using .*$serialport_re.*$mi_gdb_prompt$" {
 351                 verbose "Set target to $targetname";
 352                 return 0;
 353             }
 354             -re "Remote target $targetname connected to.*$mi_gdb_prompt$" {
 355                 verbose "Set target to $targetname";
 356                 return 0;
 357             }
 358             -re "Connected to.*$mi_gdb_prompt$" {
 359                 verbose "Set target to $targetname";
 360                 return 0;
 361             }
 362             -re "Ending remote.*$mi_gdb_prompt$" { }
 363             -re "Connection refused.*$mi_gdb_prompt$" {
 364                 verbose "Connection refused by remote target.  Pausing, and trying again."
 365                 sleep 5
 366                 continue
 367             }
 368             -re "Timeout reading from remote system.*$mi_gdb_prompt$" {
 369                 verbose "Got timeout error from gdb.";
 370             }
 371             timeout {
 372                 send_gdb "\ 3";
 373                 break
 374             }
 375         }
 376     }
 377     return 1
 378 }
 379
 380 #
 381 # load a file into the debugger (file command only).
 382 # return a -1 if anything goes wrong.
 383 #
 384 proc mi_gdb_file_cmd { arg } {
 385     global verbose
 386     global loadpath
 387     global loadfile
 388     global GDB
 389     global mi_gdb_prompt
 390     global last_loaded_file
 391     upvar timeout timeout
 392
 393     set last_loaded_file $arg
 394
 395     if [is_remote host] {
 396         set arg [remote_download host $arg];
 397         if { $arg == "" } {
 398             error "download failed"
 399             return -1;
 400         }
 401     }
 402
 403 # FIXME: Several of these patterns are only acceptable for console
 404 # output.  Queries are an error for mi.
 405     send_gdb "105-file-exec-and-symbols $arg\n"
 406     gdb_expect 120 {
 407         -re "Reading symbols from.*done.*$mi_gdb_prompt$" {
 408             verbose "\t\tLoaded $arg into the $GDB"
 409             return 0
 410         }
 411         -re "has no symbol-table.*$mi_gdb_prompt$" {
 412             perror "$arg wasn't compiled with \"-g\""
 413             return -1
 414         }
 415         -re "Load new symbol table from \".*\".*y or n. $" {
 416             send_gdb "y\n"
 417             gdb_expect 120 {
 418                 -re "Reading symbols from.*done.*$mi_gdb_prompt$" {
 419                     verbose "\t\tLoaded $arg with new symbol table into $GDB"
 420                     # All OK
 421                 }
 422                 timeout {
 423                     perror "(timeout) Couldn't load $arg, other program already loaded."
 424                     return -1
 425                 }
 426             }
 427         }
 428         -re "No such file or directory.*$mi_gdb_prompt$" {
 429             perror "($arg) No such file or directory\n"
 430             return -1
 431         }
 432         -re "105-file-exec-and-symbols .*\r\n105\\\^done\r\n$mi_gdb_prompt$" {
 433             # We (MI) are just giving the prompt back for now, instead of giving
 434             # some acknowledgement.
 435             return 0
 436         }
 437         timeout {
 438             perror "couldn't load $arg into $GDB (timed out)."
 439             return -1
 440         }
 441         eof {
 442             # This is an attempt to detect a core dump, but seems not to
 443             # work.  Perhaps we need to match .* followed by eof, in which
 444             # gdb_expect does not seem to have a way to do that.
 445             perror "couldn't load $arg into $GDB (end of file)."
 446             return -1
 447         }
 448     }
 449 }
 450
 451 #
 452 # connect to the target and download a file, if necessary.
 453 # return a -1 if anything goes wrong.
 454 #
 455 proc mi_gdb_target_load { } {
 456     global verbose
 457     global loadpath
 458     global loadfile
 459     global GDB
 460     global mi_gdb_prompt
 461     upvar timeout timeout
 462
 463     if { [info procs gdbserver_gdb_load] != "" } {
 464         mi_gdb_test "kill" ".*" ""
 465         set res [gdbserver_gdb_load]
 466         set protocol [lindex $res 0]
 467         set gdbport [lindex $res 1]
 468
 469         if { [mi_gdb_target_cmd $protocol $gdbport] != 0 } {
 470             return -1
 471         }
 472     } elseif { [info procs send_target_sid] != "" } {
 473         # For SID, things get complex
 474         send_gdb "kill\n"
 475         gdb_expect 10 {
 476             -re ".*$mi_gdb_prompt$"
 477         }
 478         send_target_sid
 479         gdb_expect 60 {
 480             -re "\\^done.*$mi_gdb_prompt$" {
 481             }
 482             timeout {
 483                 perror "Unable to connect to SID target"
 484                 return -1
 485             }
 486         }
 487         send_gdb "48-target-download\n"
 488         gdb_expect 10 {
 489             -re "48\\^done.*$mi_gdb_prompt$" {
 490             }
 491             timeout {
 492                 perror "Unable to download to SID target"
 493                 return -1
 494             }
 495         }
 496     } elseif { [target_info protocol] == "sim" } {
 497         # For the simulator, just connect to it directly.
 498         send_gdb "47-target-select sim\n"
 499         gdb_expect 10 {
 500             -re "47\\^connected.*$mi_gdb_prompt$" {
 501             }
 502             timeout {
 503                 perror "Unable to select sim target"
 504                 return -1
 505             }
 506         }
 507         send_gdb "48-target-download\n"
 508         gdb_expect 10 {
 509             -re "48\\^done.*$mi_gdb_prompt$" {
 510             }
 511             timeout {
 512                 perror "Unable to download to sim target"
 513                 return -1
 514             }
 515         }
 516     } elseif { [target_info gdb_protocol] == "remote" } {
 517         # remote targets
 518         if { [mi_gdb_target_cmd "remote" [target_info netport]] != 0 } {
 519             perror "Unable to connect to remote target"
 520             return -1
 521         }
 522         send_gdb "48-target-download\n"
 523         gdb_expect 10 {
 524             -re "48\\^done.*$mi_gdb_prompt$" {
 525             }
 526             timeout {
 527                 perror "Unable to download to remote target"
 528                 return -1
 529             }
 530         }
 531     }
 532     return 0
 533 }
 534
 535 #
 536 # load a file into the debugger.
 537 # return a -1 if anything goes wrong.
 538 #
 539 proc mi_gdb_load { arg } {
 540     if { $arg != "" } {
 541         return [mi_gdb_file_cmd $arg]
 542     }
 543     return 0
 544 }
 545
 546 # mi_gdb_test COMMAND PATTERN MESSAGE [IPATTERN] -- send a command to gdb;
 547 #   test the result.
 548 #
 549 # COMMAND is the command to execute, send to GDB with send_gdb.  If
 550 #   this is the null string no command is sent.
 551 # PATTERN is the pattern to match for a PASS, and must NOT include
 552 #   the \r\n sequence immediately before the gdb prompt.
 553 # MESSAGE is the message to be printed.  (If this is the empty string,
 554 #   then sometimes we don't call pass or fail at all; I don't
 555 #   understand this at all.)
 556 # IPATTERN is the pattern to match for the inferior's output.  This parameter
 557 #   is optional.  If present, it will produce a PASS if the match is
 558 #   successful, and a FAIL if unsuccessful.
 559 #
 560 # Returns:
 561 #    1 if the test failed,
 562 #    0 if the test passes,
 563 #   -1 if there was an internal error.
 564 #
 565 proc mi_gdb_test { args } {
 566     global verbose
 567     global mi_gdb_prompt
 568     global GDB expect_out
 569     upvar timeout timeout
 570
 571     set command [lindex $args 0]
 572     set pattern [lindex $args 1]
 573     set message [lindex $args 2]
 574
 575     if [llength $args]==4 {
 576         set ipattern [lindex $args 3]
 577     }
 578
 579     if [llength $args]==5 {
 580         set question_string [lindex $args 3];
 581         set response_string [lindex $args 4];
 582     } else {
 583         set question_string "^FOOBAR$"
 584     }
 585
 586     if $verbose>2 then {
 587         send_user "Sending \"$command\" to gdb\n"
 588         send_user "Looking to match \"$pattern\"\n"
 589         send_user "Message is \"$message\"\n"
 590     }
 591
 592     set result -1
 593     set string "${command}\n";
 594     set string_regex [string_to_regexp $command]
 595
 596     if { $command != "" } {
 597         while { "$string" != "" } {
 598             set foo [string first "\n" "$string"];
 599             set len [string length "$string"];
 600             if { $foo < [expr $len - 1] } {
 601                 set str [string range "$string" 0 $foo];
 602                 if { [send_gdb "$str"] != "" } {
 603                     global suppress_flag;
 604
 605                     if { ! $suppress_flag } {
 606                         perror "Couldn't send $command to GDB.";
 607                     }
 608                     fail "$message";
 609                     return $result;
 610                 }
 611                 gdb_expect 2 {
 612                     -re "\[\r\n\]" { }
 613                     timeout { }
 614                 }
 615                 set string [string range "$string" [expr $foo + 1] end];
 616             } else {
 617                 break;
 618             }
 619         }
 620         if { "$string" != "" } {
 621             if { [send_gdb "$string"] != "" } {
 622                 global suppress_flag;
 623
 624                 if { ! $suppress_flag } {
 625                     perror "Couldn't send $command to GDB.";
 626                 }
 627                 fail "$message";
 628                 return $result;
 629             }
 630         }
 631     }
 632
 633     if [info exists timeout] {
 634         set tmt $timeout;
 635     } else {
 636         global timeout;
 637         if [info exists timeout] {
 638             set tmt $timeout;
 639         } else {
 640             set tmt 60;
 641         }
 642     }
 643     verbose -log "Expecting: ^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)"
 644     gdb_expect $tmt {
 645          -re "\\*\\*\\* DOSEXIT code.*" {
 646              if { $message != "" } {
 647                  fail "$message";
 648              }
 649              gdb_suppress_entire_file "GDB died";
 650              return -1;
 651          }
 652          -re "Ending remote debugging.*$mi_gdb_prompt\[ \]*$" {
 653             if ![isnative] then {
 654                 warning "Can`t communicate to remote target."
 655             }
 656             gdb_exit
 657             gdb_start
 658             set result -1
 659         }
 660          -re "^($string_regex\[\r\n\]+)?($pattern\[\r\n\]+$mi_gdb_prompt\[ \]*)" {
 661             # At this point, $expect_out(1,string) is the MI input command.
 662             # and $expect_out(2,string) is the MI output command.
 663             # If $expect_out(1,string) is "", then there was no MI input command here.
 664
 665             # NOTE, there is no trailing anchor because with GDB/MI,
 666             # asynchronous responses can happen at any point, causing more
 667             # data to be available.  Normally an anchor is used to make
 668             # sure the end of the output is matched, however, $mi_gdb_prompt
 669             # is just as good of an anchor since mi_gdb_test is meant to
 670             # match a single mi output command.  If a second GDB/MI output
 671             # response is sent, it will be in the buffer for the next
 672             # time mi_gdb_test is called.
 673             if ![string match "" $message] then {
 674                 pass "$message"
 675             }
 676             set result 0
 677         }
 678          -re "(${question_string})$" {
 679             send_gdb "$response_string\n";
 680             exp_continue;
 681         }
 682          -re "Undefined.* command:.*$mi_gdb_prompt\[ \]*$" {
 683             perror "Undefined command \"$command\"."
 684             fail "$message"
 685             set result 1
 686         }
 687          -re "Ambiguous command.*$mi_gdb_prompt\[ \]*$" {
 688             perror "\"$command\" is not a unique command name."
 689             fail "$message"
 690             set result 1
 691         }
 692          -re "Program exited with code \[0-9\]+.*$mi_gdb_prompt\[ \]*$" {
 693             if ![string match "" $message] then {
 694                 set errmsg "$message (the program exited)"
 695             } else {
 696                 set errmsg "$command (the program exited)"
 697             }
 698             fail "$errmsg"
 699             return -1
 700         }
 701          -re "The program is not being run.*$mi_gdb_prompt\[ \]*$" {
 702             if ![string match "" $message] then {
 703                 set errmsg "$message (the program is no longer running)"
 704             } else {
 705                 set errmsg "$command (the program is no longer running)"
 706             }
 707             fail "$errmsg"
 708             return -1
 709         }
 710          -re ".*$mi_gdb_prompt\[ \]*$" {
 711             if ![string match "" $message] then {
 712                 fail "$message"
 713             }
 714             set result 1
 715         }
 716          "<return>" {
 717             send_gdb "\n"
 718             perror "Window too small."
 719             fail "$message"
 720         }
 721          -re "\\(y or n\\) " {
 722             send_gdb "n\n"
 723             perror "Got interactive prompt."
 724             fail "$message"
 725         }
 726          eof {
 727              perror "Process no longer exists"
 728              if { $message != "" } {
 729                  fail "$message"
 730              }
 731              return -1
 732         }
 733          full_buffer {
 734             perror "internal buffer is full."
 735             fail "$message"
 736         }
 737         timeout {
 738             if ![string match "" $message] then {
 739                 fail "$message (timeout)"
 740             }
 741             set result 1
 742         }
 743     }
 744
 745     # If the GDB output matched, compare the inferior output.
 746     if { $result == 0 } {
 747         if [ info exists ipattern ] {
 748             if { ![target_info exists gdb,noinferiorio] } {
 749                 global mi_inferior_spawn_id
 750                 expect {
 751                     -i $mi_inferior_spawn_id -re "$ipattern" {
 752                         pass "$message inferior output"
 753                     }
 754                     timeout {
 755                         fail "$message inferior output (timeout)"
 756                         set result 1
 757                     }
 758                 }
 759             } else {
 760                 unsupported "$message inferior output"
 761             }
 762         }
 763     }
 764
 765     return $result
 766 }
 767
 768 #
 769 # MI run command.  (A modified version of gdb_run_cmd)
 770 #
 771
 772 # In patterns, the newline sequence ``\r\n'' is matched explicitly as
 773 # ``.*$'' could swallow up output that we attempt to match elsewhere.
 774
 775 proc mi_run_cmd {args} {
 776     global suppress_flag
 777     if { $suppress_flag } {
 778         return -1
 779     }
 780     global mi_gdb_prompt
 781
 782     if [target_info exists gdb_init_command] {
 783         send_gdb "[target_info gdb_init_command]\n";
 784         gdb_expect 30 {
 785             -re "$mi_gdb_prompt$" { }
 786             default {
 787                 perror "gdb_init_command for target failed";
 788                 return;
 789             }
 790         }
 791     }
 792
 793     if { [mi_gdb_target_load] < 0 } {
 794         return
 795     }
 796
 797     if [target_info exists use_gdb_stub] {
 798         if [target_info exists gdb,do_reload_on_run] {
 799             send_gdb "220-exec-continue\n";
 800             gdb_expect 60 {
 801                 -re "220\\^running\[\r\n\]+\\*running,thread-id=\"\[^\"\]+\"\r\n$mi_gdb_prompt$" {}
 802                 default {}
 803             }
 804             return;
 805         }
 806
 807         if [target_info exists gdb,start_symbol] {
 808             set start [target_info gdb,start_symbol];
 809         } else {
 810             set start "start";
 811         }
 812
 813         # HACK: Should either use 000-jump or fix the target code
 814         # to better handle RUN.
 815         send_gdb  "jump *$start\n"
 816         warning "Using CLI jump command, expect run-to-main FAIL"
 817         return
 818     }
 819
 820     send_gdb "220-exec-run $args\n"
 821     gdb_expect {
 822         -re "220\\^running\r\n(\\*running,thread-id=\"\[^\"\]+\"\r\n|=thread-created,id=\"1\"\r\n)*${mi_gdb_prompt}" {
 823         }
 824         timeout {
 825             perror "Unable to start target"
 826             return
 827         }
 828     }
 829     # NOTE: Shortly after this there will be a ``000*stopped,...(gdb)''
 830 }
 831
 832 #
 833 # Just like run-to-main but works with the MI interface
 834 #
 835
 836 proc mi_run_to_main { } {
 837     global suppress_flag
 838     if { $suppress_flag } {
 839         return -1
 840     }
 841
 842     global srcdir
 843     global subdir
 844     global binfile
 845     global srcfile
 846
 847     mi_delete_breakpoints
 848     mi_gdb_reinitialize_dir $srcdir/$subdir
 849     mi_gdb_load ${binfile}
 850
 851     mi_runto main
 852 }
 853
 854
 855 # Just like gdb's "runto" proc, it will run the target to a given
 856 # function.  The big difference here between mi_runto and mi_execute_to
 857 # is that mi_execute_to must have the inferior running already.  This
 858 # proc will (like gdb's runto) (re)start the inferior, too.
 859 #
 860 # FUNC is the linespec of the place to stop (it inserts a breakpoint here).
 861 # It returns:
 862 #   -1  if test suppressed, failed, timedout
 863 #    0  if test passed
 864
 865 proc mi_runto_helper {func run_or_continue} {
 866   global suppress_flag
 867   if { $suppress_flag } {
 868     return -1
 869   }
 870
 871   global mi_gdb_prompt expect_out
 872   global hex decimal fullname_syntax
 873
 874   set test "mi runto $func"
 875   mi_gdb_test "200-break-insert -t $func" \
 876     "200\\^done,bkpt=\{number=\"\[0-9\]+\",type=\"breakpoint\",disp=\"del\",enabled=\"y\",addr=\"$hex\",func=\"$func\(\\\(.*\\\)\)?\",file=\".*\",line=\"\[0-9\]*\",times=\"0\",original-location=\".*\"\}" \
 877     "breakpoint at $func"
 878
 879   if {![regexp {number="[0-9]+"} $expect_out(buffer) str]
 880       || ![scan $str {number="%d"} bkptno]} {
 881     set bkptno {[0-9]+}
 882   }
 883
 884   if {$run_or_continue == "run"} {
 885       mi_run_cmd
 886   } else {
 887       mi_send_resuming_command "exec-continue" "$test"
 888   }
 889
 890   mi_expect_stop "breakpoint-hit" $func ".*" ".*" "\[0-9\]+" { "" "disp=\"del\"" } $test
 891 }
 892
 893 proc mi_runto {func} {
 894     mi_runto_helper $func "run"
 895 }
 896
 897 # Next to the next statement
 898 # For return values, see mi_execute_to_helper
 899
 900 proc mi_next { test } {
 901   return [mi_next_to {.*} {.*} {.*} {.*} $test]
 902 }
 903
 904
 905 # Step to the next statement
 906 # For return values, see mi_execute_to_helper
 907
 908 proc mi_step { test } {
 909   return [mi_step_to {.*} {.*} {.*} {.*} $test]
 910 }
 911
 912 set async "unknown"
 913
 914 proc detect_async {} {
 915     global async
 916     global mi_gdb_prompt
 917
 918     send_gdb "maint show linux-async\n"
 919
 920     gdb_expect {
 921         -re ".*Controlling the GNU/Linux inferior in asynchronous mode is on...*$mi_gdb_prompt$" {
 922             set async 1
 923         }
 924         -re ".*$mi_gdb_prompt$" {
 925             set async 0
 926         }
 927         timeout {
 928             set async 0
 929         }
 930     }
 931     return $async
 932 }
 933
 934 # Wait for MI *stopped notification to appear.
 935 # The REASON, FUNC, ARGS, FILE and LINE are regular expressions
 936 # to match against whatever is output in *stopped.  ARGS should
 937 # not include [] the list of argument is enclosed in, and other
 938 # regular expressions should not include quotes.
 939 # If EXTRA is a list of one element, it's the regular expression
 940 # for output expected right after *stopped, and before GDB prompt.
 941 # If EXTRA is a list of two elements, the first element is for
 942 # output right after *stopped, and the second element is output
 943 # right after reason field.  The regex after reason should not include
 944 # the comma separating it from the following fields.
 945 #
 946 # When we fail to match output at all, -1 is returned.  Otherwise,
 947 # the line at which we stop is returned.  This is useful when exact
 948 # line is not possible to specify for some reason -- one can pass
 949 # the .* regexp for line, and then check the line programmatically.
 950 proc mi_expect_stop { reason func args file line extra test } {
 951
 952     global mi_gdb_prompt
 953     global hex
 954     global decimal
 955     global fullname_syntax
 956     global async
 957
 958     set after_stopped ""
 959     set after_reason ""
 960     if { [llength $extra] == 2 } {
 961         set after_stopped [lindex $extra 0]
 962         set after_reason [lindex $extra 1]
 963         set after_reason "${after_reason},"
 964     } elseif { [llength $extra] == 1 } {
 965         set after_stopped [lindex $extra 0]
 966     }
 967
 968     if {$async} {
 969         set prompt_re ""
 970     } else {
 971         set prompt_re "$mi_gdb_prompt"
 972     }
 973
 974     if { $reason == "really-no-reason" } {
 975         gdb_expect {
 976           -re "\\*stopped\r\n$prompt_re$" {
 977             pass "$test"
 978           }
 979           timeout {
 980               fail "$test (unknown output after running)"
 981           }
 982         }
 983         return
 984     }
 985
 986     if { $reason == "exited-normally" } {
 987
 988         gdb_expect {
 989           -re "\\*stopped,reason=\"exited-normally\"\r\n$prompt_re$" {
 990             pass "$test"
 991           }
 992           -re ".*$mi_gdb_prompt$" {fail "continue to end (2)"}
 993           timeout {
 994               fail "$test (unknown output after running)"
 995           }
 996         }
 997         return
 998     }
 999
1000     set args "\\\[$args\\\]"
1001
1002     set bn ""
1003     if { $reason == "breakpoint-hit" } {
1004         set bn {bkptno="[0-9]+",}
1005     }
1006
1007     set r ""
1008     if { $reason != "" } {
1009         set r "reason=\"$reason\","
1010     }
1011
1012
1013     set a $after_reason
1014
1015     verbose -log "mi_expect_stop: expecting: \\*stopped,${r}${a}${bn}thread-id=\"$decimal\",stopped-threads=.*,frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",fullname=\"${fullname_syntax}$file\",line=\"$line\"\}$after_stopped\r\n$prompt_re$"
1016     gdb_expect {
1017         -re "\\*stopped,${r}${a}${bn}thread-id=\"$decimal\",stopped-threads=.*,frame=\{addr=\"$hex\",func=\"$func\",args=$args,file=\".*$file\",fullname=\"${fullname_syntax}$file\",line=\"($line)\"\}$after_stopped\r\n$prompt_re$" {
1018             pass "$test"
1019             return $expect_out(2,string)
1020         }
1021         -re "\\*stopped,${r}${a}${bn}thread-id=\"$decimal\",stopped-threads=.*,frame=\{addr=\"$hex\",func=\".*\",args=\[\\\[\{\].*\[\\\]\}\],file=\".*\",fullname=\"${fullname_syntax}.*\",line=\"\[0-9\]*\"\}.*\r\n$prompt_re$" {
1022             fail "$test (stopped at wrong place)"
1023             return -1
1024         }
1025         -re ".*\r\n$mi_gdb_prompt$" {
1026             fail "$test (unknown output after running)"
1027             return -1
1028         }
1029         timeout {
1030             fail "$test (timeout)"
1031             return -1
1032         }
1033     }
1034 }
1035
1036 # cmd should not include the number or newline (i.e. "exec-step 3", not
1037 # "220-exec-step 3\n"
1038
1039 # Can not match -re ".*\r\n${mi_gdb_prompt}", because of false positives
1040 # after the first prompt is printed.
1041
1042 proc mi_execute_to { cmd reason func args file line extra test } {
1043     global suppress_flag
1044     if { $suppress_flag } {
1045         return -1
1046     }
1047
1048     mi_send_resuming_command "$cmd" "$test"
1049     set r [mi_expect_stop $reason $func $args $file $line $extra $test]
1050     return $r
1051 }
1052
1053 proc mi_next_to { func args file line test } {
1054     mi_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
1055         "$file" "$line" "" "$test"
1056 }
1057
1058 proc mi_step_to { func args file line test } {
1059     mi_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
1060         "$file" "$line" "" "$test"
1061 }
1062
1063 proc mi_finish_to { func args file line result ret test } {
1064     mi_execute_to "exec-finish" "function-finished" "$func" "$args" \
1065         "$file" "$line" \
1066         ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
1067         "$test"
1068 }
1069
1070 proc mi_continue_to {func} {
1071     mi_runto_helper $func "continue"
1072 }
1073
1074 proc mi0_execute_to { cmd reason func args file line extra test } {
1075     mi_execute_to_helper "$cmd" "$reason" "$func" "\{$args\}" \
1076         "$file" "$line" "$extra" "$test"
1077 }
1078
1079 proc mi0_next_to { func args file line test } {
1080     mi0_execute_to "exec-next" "end-stepping-range" "$func" "$args" \
1081         "$file" "$line" "" "$test"
1082 }
1083
1084 proc mi0_step_to { func args file line test } {
1085     mi0_execute_to "exec-step" "end-stepping-range" "$func" "$args" \
1086         "$file" "$line" "" "$test"
1087 }
1088
1089 proc mi0_finish_to { func args file line result ret test } {
1090     mi0_execute_to "exec-finish" "function-finished" "$func" "$args" \
1091         "$file" "$line" \
1092         ",gdb-result-var=\"$result\",return-value=\"$ret\"" \
1093         "$test"
1094 }
1095
1096 proc mi0_continue_to { bkptno func args file line test } {
1097     mi0_execute_to "exec-continue" "breakpoint-hit\",bkptno=\"$bkptno" \
1098         "$func" "$args" "$file" "$line" "" "$test"
1099 }
1100
1101 # Creates a breakpoint and checks the reported fields are as expected
1102 proc mi_create_breakpoint { location number disp func file line address test } {
1103     verbose -log "Expecting: 222\\^done,bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\"$file\",fullname=\".*\",line=\"$line\",times=\"0\",original-location=\".*\"\}"
1104     mi_gdb_test "222-break-insert $location" \
1105         "222\\^done,bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\"$file\",fullname=\".*\",line=\"$line\",times=\"0\",original-location=\".*\"\}" \
1106         $test
1107 }
1108
1109 proc mi_list_breakpoints { expected test } {
1110     set fullname ".*"
1111
1112     set body ""
1113     set first 1
1114
1115     foreach item $children {
1116         if {$first == 0} {
1117             set body "$body,"
1118         }
1119     set number disp func file line address
1120         set number [lindex $item 0]
1121         set disp [lindex $item 1]
1122         set func [lindex $item 2]
1123         set line [lindex $item 3]
1124         set address [lindex $item 4]
1125         set body "$body,bkpt=\{number=\"$number\",type=\"breakpoint\",disp=\"$disp\",enabled=\"y\",addr=\"$address\",func=\"$func\",file=\"$file\",${fullname},line=\"$line\",times=\"0\",original-location=\".*\"\}"
1126         set first 0
1127     }
1128
1129     verbose -log "Expecint: 666\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[$body\\\]\}" \
1130     mi_gdb_test "666-break-list" \
1131         "666\\\^done,BreakpointTable=\{nr_rows=\".\",nr_cols=\".\",hdr=\\\[\{width=\".*\",alignment=\".*\",col_name=\"number\",colhdr=\"Num\"\}.*colhdr=\"Type\".*colhdr=\"Disp\".*colhdr=\"Enb\".*colhdr=\"Address\".*colhdr=\"What\".*\\\],body=\\\[$body\\\]\}" \
1132         $test
1133 }
1134
1135 # Creates varobj named NAME for EXPRESSION.
1136 # Name cannot be "-".
1137 proc mi_create_varobj { name expression testname } {
1138     mi_gdb_test "-var-create $name * $expression" \
1139         "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=.*" \
1140         $testname
1141 }
1142
1143 proc mi_create_floating_varobj { name expression testname } {
1144     mi_gdb_test "-var-create $name @ $expression" \
1145         "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=.*" \
1146         $testname
1147 }
1148
1149
1150 # Same as mi_create_varobj, but also checks the reported type
1151 # of the varobj.
1152 proc mi_create_varobj_checked { name expression type testname } {
1153     mi_gdb_test "-var-create $name * $expression" \
1154         "\\^done,name=\"$name\",numchild=\"\[0-9\]+\",value=\".*\",type=\"$type\".*" \
1155         $testname
1156 }
1157
1158 # Deletes the specified NAME.
1159 proc mi_delete_varobj { name testname } {
1160     mi_gdb_test "-var-delete $name" \
1161         "\\^done,ndeleted=.*" \
1162         $testname
1163 }
1164
1165 # Updates varobj named NAME and checks that all varobjs in EXPECTED
1166 # are reported as updated, and no other varobj is updated.
1167 # Assumes that no varobj is out of scope and that no varobj changes
1168 # types.
1169 proc mi_varobj_update { name expected testname } {
1170     set er "\\^done,changelist=\\\["
1171     set first 1
1172     foreach item $expected {
1173         set v "{name=\"$item\",in_scope=\"true\",type_changed=\"false\"}"
1174         if {$first == 1} {
1175             set er "$er$v"
1176             set first 0
1177         } else {
1178             set er "$er,$v"
1179         }
1180     }
1181     set er "$er\\\]"
1182
1183     verbose -log "Expecting: $er" 2
1184     mi_gdb_test "-var-update $name" $er $testname
1185 }
1186
1187 proc mi_varobj_update_with_type_change { name new_type new_children testname } {
1188     set v "{name=\"$name\",in_scope=\"true\",type_changed=\"true\",new_type=\"$new_type\",new_num_children=\"$new_children\"}"
1189     set er "\\^done,changelist=\\\[$v\\\]"
1190     verbose -log "Expecting: $er"
1191     mi_gdb_test "-var-update $name" $er $testname
1192 }
1193
1194 proc mi_check_varobj_value { name value testname } {
1195
1196     mi_gdb_test "-var-evaluate-expression $name" \
1197         "\\^done,value=\"$value\"" \
1198         $testname
1199 }
1200
1201 # Check the results of the:
1202 #
1203 #   -var-list-children VARNAME
1204 #
1205 # command.  The CHILDREN parement should be a list of lists.
1206 # Each inner list can have either 3 or 4 elements, describing
1207 # fields that gdb is expected to report for child variable object,
1208 # in the following order
1209 #
1210 #   - Name
1211 #   - Expression
1212 #   - Number of children
1213 #   - Type
1214 #
1215 # If inner list has 3 elements, the gdb is expected to output no
1216 # type for a child and no value.
1217 #
1218 # If the inner list has 4 elements, gdb output is expected to
1219 # have no value.
1220 #
1221 proc mi_list_varobj_children { varname children testname } {
1222
1223     set options ""
1224     if {[llength $varname] == 2} {
1225         set options [lindex $varname 1]
1226         set varname [lindex $varname 0]
1227     }
1228
1229     set numchildren [llength $children]
1230     set children_exp {}
1231     set whatever "\"\[^\"\]+\""
1232
1233     foreach item $children {
1234
1235         set name [lindex $item 0]
1236         set exp [lindex $item  1]
1237         set numchild [lindex $item 2]
1238         if {[llength $item] == 5} {
1239             set type [lindex $item 3]
1240             set value [lindex $item 4]
1241
1242             lappend children_exp\
1243                 "child={name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",value=\"$value\",type=\"$type\"\(,thread-id=\"\[0-9\]+\")?}"
1244         } elseif {[llength $item] == 4} {
1245             set type [lindex $item 3]
1246
1247             lappend children_exp\
1248                 "child={name=\"$name\",exp=\"$exp\",numchild=\"$numchild\",type=\"$type\"\(,thread-id=\"\[0-9\]+\")?}"
1249         } else {
1250             lappend children_exp\
1251                 "child={name=\"$name\",exp=\"$exp\",numchild=\"$numchild\"(,thread-id=\"\[0-9\]+\")?}"
1252         }
1253     }
1254     set children_exp_j [join $children_exp ","]
1255     if {$numchildren} {
1256         set expected "\\^done,numchild=\".*\",children=\\\[$children_exp_j.*\\\]"
1257     } {
1258         set expected "\\^done,numchild=\"0\""
1259     }
1260
1261     verbose -log "Expecting: $expected"
1262
1263     mi_gdb_test "-var-list-children $options $varname" $expected $testname
1264 }
1265
1266 # Verifies that variable object VARNAME has NUMBER children,
1267 # where each one is named $VARNAME.<index-of-child> and has type TYPE.
1268 proc mi_list_array_varobj_children { varname number type testname } {
1269     set t {}
1270     for {set i 0} {$i < $number} {incr i} {
1271         lappend t [list $varname.$i $i 0 $type]
1272     }
1273     mi_list_varobj_children $varname $t $testname
1274 }
1275
1276 # A list of two-element lists.  First element of each list is
1277 # a Tcl statement, and the second element is the line
1278 # number of source C file where the statement originates.
1279 set mi_autotest_data ""
1280 # The name of the source file for autotesting.
1281 set mi_autotest_source ""
1282
1283 proc count_newlines { string } {
1284     return [regexp -all "\n" $string]
1285 }
1286
1287 # Prepares for running inline tests in FILENAME.
1288 # See comments for mi_run_inline_test for detailed
1289 # explanation of the idea and syntax.
1290 proc mi_prepare_inline_tests { filename } {
1291
1292     global srcdir
1293     global subdir
1294     global mi_autotest_source
1295     global mi_autotest_data
1296
1297     set mi_autotest_data {}
1298
1299     set mi_autotest_source $filename
1300
1301     if { ! [regexp "^/" "$filename"] } then {
1302         set filename "$srcdir/$subdir/$filename"
1303     }
1304
1305     set chan [open $filename]
1306     set content [read $chan]
1307     set line_number 1
1308     while {1} {
1309         set start [string first "/*:" $content]
1310         if {$start != -1} {
1311             set end [string first ":*/" $content]
1312             if {$end == -1} {
1313                 error "Unterminated special comment in $filename"
1314             }
1315
1316             set prefix [string range $content 0 $start]
1317             set prefix_newlines [count_newlines $prefix]
1318
1319             set line_number [expr $line_number+$prefix_newlines]
1320             set comment_line $line_number
1321
1322             set comment [string range $content [expr $start+3] [expr $end-1]]
1323
1324             set comment_newlines [count_newlines $comment]
1325             set line_number [expr $line_number+$comment_newlines]
1326
1327             set comment [string trim $comment]
1328             set content [string range $content [expr $end+3] \
1329                              [string length $content]]
1330             lappend mi_autotest_data [list $comment $comment_line]
1331         } else {
1332            break
1333         }
1334     }
1335     close $chan
1336 }
1337
1338 # Helper to mi_run_inline_test below.
1339 # Return the list of all (statement,line_number) lists
1340 # that comprise TESTCASE.  The begin and end markers
1341 # are not included.
1342 proc mi_get_inline_test {testcase} {
1343
1344     global mi_gdb_prompt
1345     global mi_autotest_data
1346     global mi_autotest_source
1347
1348     set result {}
1349
1350     set seen_begin 0
1351     set seen_end 0
1352     foreach l $mi_autotest_data {
1353
1354         set comment [lindex $l 0]
1355
1356         if {$comment == "BEGIN: $testcase"} {
1357             set seen_begin 1
1358         } elseif {$comment == "END: $testcase"} {
1359             set seen_end 1
1360             break
1361         } elseif {$seen_begin==1} {
1362             lappend result $l
1363         }
1364     }
1365
1366     if {$seen_begin == 0} {
1367         error "Autotest $testcase not found"
1368     }
1369
1370     if {$seen_begin == 1 && $seen_end == 0} {
1371         error "Missing end marker for test $testcase"
1372     }
1373
1374     return $result
1375 }
1376
1377 # Sets temporary breakpoint at LOCATION.
1378 proc mi_tbreak {location} {
1379
1380     global mi_gdb_prompt
1381
1382     mi_gdb_test "-break-insert -t $location" \
1383         {\^done,bkpt=.*} \
1384         "run to $location (set breakpoint)"
1385 }
1386
1387 # Send COMMAND that must be a command that resumes
1388 # the inferiour (run/continue/next/etc) and consumes
1389 # the "^running" output from it.
1390 proc mi_send_resuming_command_raw {command test} {
1391
1392     global mi_gdb_prompt
1393
1394     send_gdb "$command\n"
1395     gdb_expect {
1396         -re "\\^running\r\n\\*running,thread-id=\"\[^\"\]+\"\r\n${mi_gdb_prompt}" {
1397             # Note that lack of 'pass' call here -- this works around limitation
1398             # in DejaGNU xfail mechanism. mi-until.exp has this:
1399             #
1400             #     setup_kfail gdb/2104 "*-*-*"
1401             #     mi_execute_to ...
1402             #
1403             # and mi_execute_to uses mi_send_resuming_command.  If we use 'pass' here,
1404             # it will reset kfail, so when the actual test fails, it will be flagged
1405             # as real failure.
1406         }
1407         -re ".*${mi_gdb_prompt}" {
1408             fail "$test (failed to resume)"
1409         }
1410         -re "\\^error,msg=.*" {
1411             fail "$test (MI error)"
1412             return -1
1413         }
1414         timeout {
1415             fail "$test"
1416             return -1
1417         }
1418     }
1419 }
1420
1421 proc mi_send_resuming_command {command test} {
1422     mi_send_resuming_command_raw -$command $test
1423 }
1424
1425 # Helper to mi_run_inline_test below.
1426 # Sets a temporary breakpoint at LOCATION and runs
1427 # the program using COMMAND.  When the program is stopped
1428 # returns the line at which it.  Returns -1 if line cannot
1429 # be determined.
1430 # Does not check that the line is the same as requested.
1431 # The caller can check itself if required.
1432 proc mi_continue_to_line {location test} {
1433
1434     mi_tbreak $location
1435     mi_send_resuming_command "exec-continue" "run to $location (exec-continue)"
1436     return [mi_get_stop_line $test]
1437 }
1438
1439 # Wait until gdb prints the current line.
1440 proc mi_get_stop_line {test} {
1441
1442   global mi_gdb_prompt
1443   global async
1444
1445   if {$async} {
1446       set prompt_re ""
1447   } else {
1448       set prompt_re "$mi_gdb_prompt"
1449   }
1450
1451   gdb_expect {
1452       -re ".*line=\"(.*)\".*\r\n$prompt_re$" {
1453           return $expect_out(1,string)
1454       }
1455       -re ".*$mi_gdb_prompt$" {
1456           fail "wait for stop ($test)"
1457       }
1458       timeout {
1459           fail "wait for stop ($test)"
1460       }
1461   }
1462 }
1463
1464 # Run a MI test embedded in comments in a C file.
1465 # The C file should contain special comments in the following
1466 # three forms:
1467 #
1468 #    /*: BEGIN: testname :*/
1469 #    /*:  <Tcl statements> :*/
1470 #    /*: END: testname :*/
1471 #
1472 # This procedure find the begin and end marker for the requested
1473 # test. Then, a temporary breakpoint is set at the begin
1474 # marker and the program is run (from start).
1475 #
1476 # After that, for each special comment between the begin and end
1477 # marker, the Tcl statements are executed.  It is assumed that
1478 # for each comment, the immediately preceding line is executable
1479 # C statement.  Then, gdb will be single-stepped until that
1480 # preceding C statement is executed, and after that the
1481 # Tcl statements in the comment will be executed.
1482 #
1483 # For example:
1484 #
1485 #     /*: BEGIN: assignment-test :*/
1486 #     v = 10;
1487 #     /*: <Tcl code to check that 'v' is indeed 10 :*/
1488 #     /*: END: assignment-test :*/
1489 #
1490 # The mi_prepare_inline_tests function should be called before
1491 # calling this function.  A given C file can contain several
1492 # inline tests.  The names of the tests must be unique within one
1493 # C file.
1494 #
1495 proc mi_run_inline_test { testcase } {
1496
1497     global mi_gdb_prompt
1498     global hex
1499     global decimal
1500     global fullname_syntax
1501     global mi_autotest_source
1502
1503     set commands [mi_get_inline_test $testcase]
1504
1505     set first 1
1506     set line_now 1
1507
1508     foreach c $commands {
1509         set statements [lindex $c 0]
1510         set line [lindex $c 1]
1511         set line [expr $line-1]
1512
1513         # We want gdb to be stopped at the expression immediately
1514         # before the comment.  If this is the first comment, the
1515         # program is either not started yet or is in some random place,
1516         # so we run it.  For further comments, we might be already
1517         # standing at the right line. If not continue till the
1518         # right line.
1519
1520         if {$first==1} {
1521             # Start the program afresh.
1522             mi_tbreak "$mi_autotest_source:$line"
1523             mi_run_cmd
1524             set line_now [mi_get_stop_line "$testcase: step to $line"]
1525             set first 0
1526         } elseif {$line_now!=$line} {
1527             set line_now [mi_continue_to_line "$mi_autotest_source:$line" "continue to $line"]
1528         }
1529
1530         if {$line_now!=$line} {
1531             fail "$testcase: go to line $line"
1532         }
1533
1534         # We're not at the statement right above the comment.
1535         # Execute that statement so that the comment can test
1536         # the state after the statement is executed.
1537
1538         # Single-step past the line.
1539         mi_send_resuming_command "exec-next" "$testcase: step over $line"
1540         set line_now [mi_get_stop_line "$testcase: step over $line"]
1541
1542         # We probably want to use 'uplevel' so that statements
1543         # have direct access to global variables that the
1544         # main 'exp' file has set up.  But it's not yet clear,
1545         # will need more experience to be sure.
1546         eval $statements
1547     }
1548 }
1549
1550 proc get_mi_thread_list {name} {
1551   global expect_out
1552
1553   # MI will return a list of thread ids:
1554   #
1555   # -thread-list-ids
1556   # ^done,thread-ids=[thread-id="1",thread-id="2",...],number-of-threads="N"
1557   # (gdb)
1558   mi_gdb_test "-thread-list-ids" \
1559     {.*\^done,thread-ids={(thread-id="[0-9]+"(,)?)+},number-of-threads="[0-9]+"} \
1560     "-thread_list_ids ($name)"
1561
1562   set output {}
1563   if {[info exists expect_out(buffer)]} {
1564     set output $expect_out(buffer)
1565   }
1566
1567   set thread_list {}
1568   if {![regexp {thread-ids=\{(thread-id="[0-9]+"(,)?)*\}} $output threads]} {
1569     fail "finding threads in MI output ($name)"
1570   } else {
1571     pass "finding threads in MI output ($name)"
1572
1573     # Make list of console threads
1574     set start [expr {[string first \{ $threads] + 1}]
1575     set end   [expr {[string first \} $threads] - 1}]
1576     set threads [string range $threads $start $end]
1577     foreach thread [split $threads ,] {
1578       if {[scan $thread {thread-id="%d"} num]} {
1579         lappend thread_list $num
1580       }
1581     }
1582   }
1583
1584   return $thread_list
1585 }
1586
1587 # Check that MI and the console know of the same threads.
1588 # Appends NAME to all test names.
1589 proc check_mi_and_console_threads {name} {
1590   global expect_out
1591
1592   mi_gdb_test "-thread-list-ids" \
1593     {.*\^done,thread-ids={(thread-id="[0-9]+"(,)*)+},number-of-threads="[0-9]+"} \
1594     "-thread-list-ids ($name)"
1595   set mi_output {}
1596   if {[info exists expect_out(buffer)]} {
1597     set mi_output $expect_out(buffer)
1598   }
1599
1600   # GDB will return a list of thread ids and some more info:
1601   #
1602   # (gdb)
1603   # -interpreter-exec console "info threads"
1604   # ~"  4 Thread 2051 (LWP 7734)  0x401166b1 in __libc_nanosleep () at __libc_nanosleep:-1"
1605   # ~"  3 Thread 1026 (LWP 7733)   () at __libc_nanosleep:-1"
1606   # ~"  2 Thread 2049 (LWP 7732)  0x401411f8 in __poll (fds=0x804bb24, nfds=1, timeout=2000) at ../sysdeps/unix/sysv/linux/poll.c:63"
1607   # ~"* 1 Thread 1024 (LWP 7731)  main (argc=1, argv=0xbfffdd94) at ../../../src/gdb/testsuite/gdb.mi/pthreads.c:160"
1608   # FIXME: kseitz/2002-09-05: Don't use the hack-cli method.
1609   mi_gdb_test "info threads" \
1610     {.*(~".*"[\r\n]*)+.*} \
1611     "info threads ($name)"
1612   set console_output {}
1613   if {[info exists expect_out(buffer)]} {
1614     set console_output $expect_out(buffer)
1615   }
1616
1617   # Make a list of all known threads to console (gdb's thread IDs)
1618   set console_thread_list {}
1619   foreach line [split $console_output \n] {
1620     if {[string index $line 0] == "~"} {
1621       # This is a line from the console; trim off "~", " ", "*", and "\""
1622       set line [string trim $line ~\ \"\*]
1623       if {[scan $line "%d" id] == 1} {
1624         lappend console_thread_list $id
1625       }
1626     }
1627   }
1628
1629   # Now find the result string from MI
1630   set mi_result ""
1631   foreach line [split $mi_output \n] {
1632     if {[string range $line 0 4] == "^done"} {
1633       set mi_result $line
1634     }
1635   }
1636   if {$mi_result == ""} {
1637     fail "finding MI result string ($name)"
1638   } else {
1639     pass "finding MI result string ($name)"
1640   }
1641
1642   # Finally, extract the thread ids and compare them to the console
1643   set num_mi_threads_str ""
1644   if {![regexp {number-of-threads="[0-9]+"} $mi_result num_mi_threads_str]} {
1645     fail "finding number of threads in MI output ($name)"
1646   } else {
1647     pass "finding number of threads in MI output ($name)"
1648
1649     # Extract the number of threads from the MI result
1650     if {![scan $num_mi_threads_str {number-of-threads="%d"} num_mi_threads]} {
1651       fail "got number of threads from MI ($name)"
1652     } else {
1653       pass "got number of threads from MI ($name)"
1654
1655       # Check if MI and console have same number of threads
1656       if {$num_mi_threads != [llength $console_thread_list]} {
1657         fail "console and MI have same number of threads ($name)"
1658       } else {
1659         pass "console and MI have same number of threads ($name)"
1660
1661         # Get MI thread list
1662         set mi_thread_list [get_mi_thread_list $name]
1663
1664         # Check if MI and console have the same threads
1665         set fails 0
1666         foreach ct [lsort $console_thread_list] mt [lsort $mi_thread_list] {
1667           if {$ct != $mt} {
1668             incr fails
1669           }
1670         }
1671         if {$fails > 0} {
1672           fail "MI and console have same threads ($name)"
1673
1674           # Send a list of failures to the log
1675           send_log "Console has thread ids: $console_thread_list\n"
1676           send_log "MI has thread ids: $mi_thread_list\n"
1677         } else {
1678           pass "MI and console have same threads ($name)"
1679         }
1680       }
1681     }
1682   }
1683 }
1684
1685 proc mi_load_shlibs { args } {
1686     if {![is_remote target]} {
1687         return
1688     }
1689
1690     foreach file $args {
1691         gdb_download $file
1692     }
1693
1694     # Even if the target supplies full paths for shared libraries,
1695     # they may not be paths for this system.
1696     mi_gdb_test "set solib-search-path [file dirname [lindex $args 0]]" "\^done" ""
1697 }
1698