1 /* Target-dependent code for the Xtensa port of GDB, the GNU debugger.
3 Copyright (C) 2003-2015 Free Software Foundation, Inc.
5 This file is part of GDB.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program. If not, see <http://www.gnu.org/licenses/>. */
22 #include "solib-svr4.h"
32 #include "floatformat.h"
34 #include "reggroups.h"
37 #include "dummy-frame.h"
39 #include "dwarf2-frame.h"
40 #include "dwarf2loc.h"
41 #include "frame-base.h"
42 #include "frame-unwind.h"
44 #include "arch-utils.h"
52 #include "xtensa-isa.h"
53 #include "xtensa-tdep.h"
54 #include "xtensa-config.h"
57 static unsigned int xtensa_debug_level
= 0;
59 #define DEBUGWARN(args...) \
60 if (xtensa_debug_level > 0) \
61 fprintf_unfiltered (gdb_stdlog, "(warn ) " args)
63 #define DEBUGINFO(args...) \
64 if (xtensa_debug_level > 1) \
65 fprintf_unfiltered (gdb_stdlog, "(info ) " args)
67 #define DEBUGTRACE(args...) \
68 if (xtensa_debug_level > 2) \
69 fprintf_unfiltered (gdb_stdlog, "(trace) " args)
71 #define DEBUGVERB(args...) \
72 if (xtensa_debug_level > 3) \
73 fprintf_unfiltered (gdb_stdlog, "(verb ) " args)
76 /* According to the ABI, the SP must be aligned to 16-byte boundaries. */
77 #define SP_ALIGNMENT 16
80 /* On Windowed ABI, we use a6 through a11 for passing arguments
81 to a function called by GDB because CALL4 is used. */
82 #define ARGS_NUM_REGS 6
83 #define REGISTER_SIZE 4
86 /* Extract the call size from the return address or PS register. */
87 #define PS_CALLINC_SHIFT 16
88 #define PS_CALLINC_MASK 0x00030000
89 #define CALLINC(ps) (((ps) & PS_CALLINC_MASK) >> PS_CALLINC_SHIFT)
90 #define WINSIZE(ra) (4 * (( (ra) >> 30) & 0x3))
92 /* On TX, hardware can be configured without Exception Option.
93 There is no PS register in this case. Inside XT-GDB, let us treat
94 it as a virtual read-only register always holding the same value. */
97 /* ABI-independent macros. */
98 #define ARG_NOF(gdbarch) \
99 (gdbarch_tdep (gdbarch)->call_abi \
100 == CallAbiCall0Only ? C0_NARGS : (ARGS_NUM_REGS))
101 #define ARG_1ST(gdbarch) \
102 (gdbarch_tdep (gdbarch)->call_abi == CallAbiCall0Only \
103 ? (gdbarch_tdep (gdbarch)->a0_base + C0_ARGS) \
104 : (gdbarch_tdep (gdbarch)->a0_base + 6))
106 /* XTENSA_IS_ENTRY tests whether the first byte of an instruction
107 indicates that the instruction is an ENTRY instruction. */
109 #define XTENSA_IS_ENTRY(gdbarch, op1) \
110 ((gdbarch_byte_order (gdbarch) == BFD_ENDIAN_BIG) \
111 ? ((op1) == 0x6c) : ((op1) == 0x36))
113 #define XTENSA_ENTRY_LENGTH 3
115 /* windowing_enabled() returns true, if windowing is enabled.
116 WOE must be set to 1; EXCM to 0.
117 Note: We assume that EXCM is always 0 for XEA1. */
119 #define PS_WOE (1<<18)
120 #define PS_EXC (1<<4)
123 windowing_enabled (struct gdbarch
*gdbarch
, unsigned int ps
)
125 /* If we know CALL0 ABI is set explicitly, say it is Call0. */
126 if (gdbarch_tdep (gdbarch
)->call_abi
== CallAbiCall0Only
)
129 return ((ps
& PS_EXC
) == 0 && (ps
& PS_WOE
) != 0);
132 /* Convert a live A-register number to the corresponding AR-register
135 arreg_number (struct gdbarch
*gdbarch
, int a_regnum
, ULONGEST wb
)
137 struct gdbarch_tdep
*tdep
= gdbarch_tdep (gdbarch
);
140 arreg
= a_regnum
- tdep
->a0_base
;
141 arreg
+= (wb
& ((tdep
->num_aregs
- 1) >> 2)) << WB_SHIFT
;
142 arreg
&= tdep
->num_aregs
- 1;
144 return arreg
+ tdep
->ar_base
;
147 /* Convert a live AR-register number to the corresponding A-register order
148 number in a range [0..15]. Return -1, if AR_REGNUM is out of WB window. */
150 areg_number (struct gdbarch
*gdbarch
, int ar_regnum
, unsigned int wb
)
152 struct gdbarch_tdep
*tdep
= gdbarch_tdep (gdbarch
);
155 areg
= ar_regnum
- tdep
->ar_base
;
156 if (areg
< 0 || areg
>= tdep
->num_aregs
)
158 areg
= (areg
- wb
* 4) & (tdep
->num_aregs
- 1);
159 return (areg
> 15) ? -1 : areg
;
162 /* Read Xtensa register directly from the hardware. */
164 xtensa_read_register (int regnum
)
168 regcache_raw_read_unsigned (get_current_regcache (), regnum
, &value
);
169 return (unsigned long) value
;
172 /* Write Xtensa register directly to the hardware. */
174 xtensa_write_register (int regnum
, ULONGEST value
)
176 regcache_raw_write_unsigned (get_current_regcache (), regnum
, value
);
179 /* Return the window size of the previous call to the function from which we
182 This function is used to extract the return value after a called function
183 has returned to the caller. On Xtensa, the register that holds the return
184 value (from the perspective of the caller) depends on what call
185 instruction was used. For now, we are assuming that the call instruction
186 precedes the current address, so we simply analyze the call instruction.
187 If we are in a dummy frame, we simply return 4 as we used a 'pseudo-call4'
188 method to call the inferior function. */
191 extract_call_winsize (struct gdbarch
*gdbarch
, CORE_ADDR pc
)
193 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
198 DEBUGTRACE ("extract_call_winsize (pc = 0x%08x)\n", (int) pc
);
200 /* Read the previous instruction (should be a call[x]{4|8|12}. */
201 read_memory (pc
-3, buf
, 3);
202 insn
= extract_unsigned_integer (buf
, 3, byte_order
);
204 /* Decode call instruction:
206 call{0,4,8,12} OFFSET || {00,01,10,11} || 0101
207 callx{0,4,8,12} OFFSET || 11 || {00,01,10,11} || 0000
209 call{0,4,8,12} 0101 || {00,01,10,11} || OFFSET
210 callx{0,4,8,12} 0000 || {00,01,10,11} || 11 || OFFSET. */
212 if (byte_order
== BFD_ENDIAN_LITTLE
)
214 if (((insn
& 0xf) == 0x5) || ((insn
& 0xcf) == 0xc0))
215 winsize
= (insn
& 0x30) >> 2; /* 0, 4, 8, 12. */
219 if (((insn
>> 20) == 0x5) || (((insn
>> 16) & 0xf3) == 0x03))
220 winsize
= (insn
>> 16) & 0xc; /* 0, 4, 8, 12. */
226 /* REGISTER INFORMATION */
228 /* Find register by name. */
230 xtensa_find_register_by_name (struct gdbarch
*gdbarch
, char *name
)
234 for (i
= 0; i
< gdbarch_num_regs (gdbarch
)
235 + gdbarch_num_pseudo_regs (gdbarch
);
238 if (strcasecmp (gdbarch_tdep (gdbarch
)->regmap
[i
].name
, name
) == 0)
244 /* Returns the name of a register. */
246 xtensa_register_name (struct gdbarch
*gdbarch
, int regnum
)
248 /* Return the name stored in the register map. */
249 if (regnum
>= 0 && regnum
< gdbarch_num_regs (gdbarch
)
250 + gdbarch_num_pseudo_regs (gdbarch
))
251 return gdbarch_tdep (gdbarch
)->regmap
[regnum
].name
;
253 internal_error (__FILE__
, __LINE__
, _("invalid register %d"), regnum
);
257 /* Return the type of a register. Create a new type, if necessary. */
260 xtensa_register_type (struct gdbarch
*gdbarch
, int regnum
)
262 struct gdbarch_tdep
*tdep
= gdbarch_tdep (gdbarch
);
264 /* Return signed integer for ARx and Ax registers. */
265 if ((regnum
>= tdep
->ar_base
266 && regnum
< tdep
->ar_base
+ tdep
->num_aregs
)
267 || (regnum
>= tdep
->a0_base
268 && regnum
< tdep
->a0_base
+ 16))
269 return builtin_type (gdbarch
)->builtin_int
;
271 if (regnum
== gdbarch_pc_regnum (gdbarch
)
272 || regnum
== tdep
->a0_base
+ 1)
273 return builtin_type (gdbarch
)->builtin_data_ptr
;
275 /* Return the stored type for all other registers. */
276 else if (regnum
>= 0 && regnum
< gdbarch_num_regs (gdbarch
)
277 + gdbarch_num_pseudo_regs (gdbarch
))
279 xtensa_register_t
* reg
= &tdep
->regmap
[regnum
];
281 /* Set ctype for this register (only the first time). */
285 struct ctype_cache
*tp
;
286 int size
= reg
->byte_size
;
288 /* We always use the memory representation,
289 even if the register width is smaller. */
293 reg
->ctype
= builtin_type (gdbarch
)->builtin_uint8
;
297 reg
->ctype
= builtin_type (gdbarch
)->builtin_uint16
;
301 reg
->ctype
= builtin_type (gdbarch
)->builtin_uint32
;
305 reg
->ctype
= builtin_type (gdbarch
)->builtin_uint64
;
309 reg
->ctype
= builtin_type (gdbarch
)->builtin_uint128
;
313 for (tp
= tdep
->type_entries
; tp
!= NULL
; tp
= tp
->next
)
314 if (tp
->size
== size
)
319 char *name
= xstrprintf ("int%d", size
* 8);
320 tp
= xmalloc (sizeof (struct ctype_cache
));
321 tp
->next
= tdep
->type_entries
;
322 tdep
->type_entries
= tp
;
325 = arch_integer_type (gdbarch
, size
* 8, 1, name
);
329 reg
->ctype
= tp
->virtual_type
;
335 internal_error (__FILE__
, __LINE__
, _("invalid register number %d"), regnum
);
340 /* Return the 'local' register number for stubs, dwarf2, etc.
341 The debugging information enumerates registers starting from 0 for A0
342 to n for An. So, we only have to add the base number for A0. */
345 xtensa_reg_to_regnum (struct gdbarch
*gdbarch
, int regnum
)
349 if (regnum
>= 0 && regnum
< 16)
350 return gdbarch_tdep (gdbarch
)->a0_base
+ regnum
;
353 i
< gdbarch_num_regs (gdbarch
) + gdbarch_num_pseudo_regs (gdbarch
);
355 if (regnum
== gdbarch_tdep (gdbarch
)->regmap
[i
].target_number
)
358 internal_error (__FILE__
, __LINE__
,
359 _("invalid dwarf/stabs register number %d"), regnum
);
364 /* Write the bits of a masked register to the various registers.
365 Only the masked areas of these registers are modified; the other
366 fields are untouched. The size of masked registers is always less
367 than or equal to 32 bits. */
370 xtensa_register_write_masked (struct regcache
*regcache
,
371 xtensa_register_t
*reg
, const gdb_byte
*buffer
)
373 unsigned int value
[(MAX_REGISTER_SIZE
+ 3) / 4];
374 const xtensa_mask_t
*mask
= reg
->mask
;
376 int shift
= 0; /* Shift for next mask (mod 32). */
377 int start
, size
; /* Start bit and size of current mask. */
379 unsigned int *ptr
= value
;
380 unsigned int regval
, m
, mem
= 0;
382 int bytesize
= reg
->byte_size
;
383 int bitsize
= bytesize
* 8;
386 DEBUGTRACE ("xtensa_register_write_masked ()\n");
388 /* Copy the masked register to host byte-order. */
389 if (gdbarch_byte_order (get_regcache_arch (regcache
)) == BFD_ENDIAN_BIG
)
390 for (i
= 0; i
< bytesize
; i
++)
393 mem
|= (buffer
[bytesize
- i
- 1] << 24);
398 for (i
= 0; i
< bytesize
; i
++)
401 mem
|= (buffer
[i
] << 24);
406 /* We might have to shift the final value:
407 bytesize & 3 == 0 -> nothing to do, we use the full 32 bits,
408 bytesize & 3 == x -> shift (4-x) * 8. */
410 *ptr
= mem
>> (((0 - bytesize
) & 3) * 8);
414 /* Write the bits to the masked areas of the other registers. */
415 for (i
= 0; i
< mask
->count
; i
++)
417 start
= mask
->mask
[i
].bit_start
;
418 size
= mask
->mask
[i
].bit_size
;
419 regval
= mem
>> shift
;
421 if ((shift
+= size
) > bitsize
)
422 error (_("size of all masks is larger than the register"));
431 regval
|= mem
<< (size
- shift
);
434 /* Make sure we have a valid register. */
435 r
= mask
->mask
[i
].reg_num
;
436 if (r
>= 0 && size
> 0)
438 /* Don't overwrite the unmasked areas. */
440 regcache_cooked_read_unsigned (regcache
, r
, &old_val
);
441 m
= 0xffffffff >> (32 - size
) << start
;
443 regval
= (regval
& m
) | (old_val
& ~m
);
444 regcache_cooked_write_unsigned (regcache
, r
, regval
);
450 /* Read a tie state or mapped registers. Read the masked areas
451 of the registers and assemble them into a single value. */
453 static enum register_status
454 xtensa_register_read_masked (struct regcache
*regcache
,
455 xtensa_register_t
*reg
, gdb_byte
*buffer
)
457 unsigned int value
[(MAX_REGISTER_SIZE
+ 3) / 4];
458 const xtensa_mask_t
*mask
= reg
->mask
;
463 unsigned int *ptr
= value
;
464 unsigned int regval
, mem
= 0;
466 int bytesize
= reg
->byte_size
;
467 int bitsize
= bytesize
* 8;
470 DEBUGTRACE ("xtensa_register_read_masked (reg \"%s\", ...)\n",
471 reg
->name
== 0 ? "" : reg
->name
);
473 /* Assemble the register from the masked areas of other registers. */
474 for (i
= 0; i
< mask
->count
; i
++)
476 int r
= mask
->mask
[i
].reg_num
;
479 enum register_status status
;
482 status
= regcache_cooked_read_unsigned (regcache
, r
, &val
);
483 if (status
!= REG_VALID
)
485 regval
= (unsigned int) val
;
490 start
= mask
->mask
[i
].bit_start
;
491 size
= mask
->mask
[i
].bit_size
;
496 regval
&= (0xffffffff >> (32 - size
));
498 mem
|= regval
<< shift
;
500 if ((shift
+= size
) > bitsize
)
501 error (_("size of all masks is larger than the register"));
512 mem
= regval
>> (size
- shift
);
519 /* Copy value to target byte order. */
523 if (gdbarch_byte_order (get_regcache_arch (regcache
)) == BFD_ENDIAN_BIG
)
524 for (i
= 0; i
< bytesize
; i
++)
528 buffer
[bytesize
- i
- 1] = mem
& 0xff;
532 for (i
= 0; i
< bytesize
; i
++)
536 buffer
[i
] = mem
& 0xff;
544 /* Read pseudo registers. */
546 static enum register_status
547 xtensa_pseudo_register_read (struct gdbarch
*gdbarch
,
548 struct regcache
*regcache
,
552 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
554 DEBUGTRACE ("xtensa_pseudo_register_read (... regnum = %d (%s) ...)\n",
555 regnum
, xtensa_register_name (gdbarch
, regnum
));
557 /* Read aliases a0..a15, if this is a Windowed ABI. */
558 if (gdbarch_tdep (gdbarch
)->isa_use_windowed_registers
559 && (regnum
>= gdbarch_tdep (gdbarch
)->a0_base
)
560 && (regnum
<= gdbarch_tdep (gdbarch
)->a0_base
+ 15))
562 gdb_byte
*buf
= (gdb_byte
*) alloca (MAX_REGISTER_SIZE
);
563 enum register_status status
;
565 status
= regcache_raw_read (regcache
,
566 gdbarch_tdep (gdbarch
)->wb_regnum
,
568 if (status
!= REG_VALID
)
570 regnum
= arreg_number (gdbarch
, regnum
,
571 extract_unsigned_integer (buf
, 4, byte_order
));
574 /* We can always read non-pseudo registers. */
575 if (regnum
>= 0 && regnum
< gdbarch_num_regs (gdbarch
))
576 return regcache_raw_read (regcache
, regnum
, buffer
);
578 /* We have to find out how to deal with priveleged registers.
579 Let's treat them as pseudo-registers, but we cannot read/write them. */
581 else if (regnum
< gdbarch_tdep (gdbarch
)->a0_base
)
583 buffer
[0] = (gdb_byte
)0;
584 buffer
[1] = (gdb_byte
)0;
585 buffer
[2] = (gdb_byte
)0;
586 buffer
[3] = (gdb_byte
)0;
589 /* Pseudo registers. */
591 && regnum
< gdbarch_num_regs (gdbarch
)
592 + gdbarch_num_pseudo_regs (gdbarch
))
594 xtensa_register_t
*reg
= &gdbarch_tdep (gdbarch
)->regmap
[regnum
];
595 xtensa_register_type_t type
= reg
->type
;
596 int flags
= gdbarch_tdep (gdbarch
)->target_flags
;
598 /* We cannot read Unknown or Unmapped registers. */
599 if (type
== xtRegisterTypeUnmapped
|| type
== xtRegisterTypeUnknown
)
601 if ((flags
& xtTargetFlagsNonVisibleRegs
) == 0)
603 warning (_("cannot read register %s"),
604 xtensa_register_name (gdbarch
, regnum
));
609 /* Some targets cannot read TIE register files. */
610 else if (type
== xtRegisterTypeTieRegfile
)
612 /* Use 'fetch' to get register? */
613 if (flags
& xtTargetFlagsUseFetchStore
)
615 warning (_("cannot read register"));
619 /* On some targets (esp. simulators), we can always read the reg. */
620 else if ((flags
& xtTargetFlagsNonVisibleRegs
) == 0)
622 warning (_("cannot read register"));
627 /* We can always read mapped registers. */
628 else if (type
== xtRegisterTypeMapped
|| type
== xtRegisterTypeTieState
)
629 return xtensa_register_read_masked (regcache
, reg
, buffer
);
631 /* Assume that we can read the register. */
632 return regcache_raw_read (regcache
, regnum
, buffer
);
635 internal_error (__FILE__
, __LINE__
,
636 _("invalid register number %d"), regnum
);
640 /* Write pseudo registers. */
643 xtensa_pseudo_register_write (struct gdbarch
*gdbarch
,
644 struct regcache
*regcache
,
646 const gdb_byte
*buffer
)
648 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
650 DEBUGTRACE ("xtensa_pseudo_register_write (... regnum = %d (%s) ...)\n",
651 regnum
, xtensa_register_name (gdbarch
, regnum
));
653 /* Renumber register, if aliase a0..a15 on Windowed ABI. */
654 if (gdbarch_tdep (gdbarch
)->isa_use_windowed_registers
655 && (regnum
>= gdbarch_tdep (gdbarch
)->a0_base
)
656 && (regnum
<= gdbarch_tdep (gdbarch
)->a0_base
+ 15))
658 gdb_byte
*buf
= (gdb_byte
*) alloca (MAX_REGISTER_SIZE
);
660 regcache_raw_read (regcache
,
661 gdbarch_tdep (gdbarch
)->wb_regnum
, buf
);
662 regnum
= arreg_number (gdbarch
, regnum
,
663 extract_unsigned_integer (buf
, 4, byte_order
));
666 /* We can always write 'core' registers.
667 Note: We might have converted Ax->ARy. */
668 if (regnum
>= 0 && regnum
< gdbarch_num_regs (gdbarch
))
669 regcache_raw_write (regcache
, regnum
, buffer
);
671 /* We have to find out how to deal with priveleged registers.
672 Let's treat them as pseudo-registers, but we cannot read/write them. */
674 else if (regnum
< gdbarch_tdep (gdbarch
)->a0_base
)
678 /* Pseudo registers. */
680 && regnum
< gdbarch_num_regs (gdbarch
)
681 + gdbarch_num_pseudo_regs (gdbarch
))
683 xtensa_register_t
*reg
= &gdbarch_tdep (gdbarch
)->regmap
[regnum
];
684 xtensa_register_type_t type
= reg
->type
;
685 int flags
= gdbarch_tdep (gdbarch
)->target_flags
;
687 /* On most targets, we cannot write registers
688 of type "Unknown" or "Unmapped". */
689 if (type
== xtRegisterTypeUnmapped
|| type
== xtRegisterTypeUnknown
)
691 if ((flags
& xtTargetFlagsNonVisibleRegs
) == 0)
693 warning (_("cannot write register %s"),
694 xtensa_register_name (gdbarch
, regnum
));
699 /* Some targets cannot read TIE register files. */
700 else if (type
== xtRegisterTypeTieRegfile
)
702 /* Use 'store' to get register? */
703 if (flags
& xtTargetFlagsUseFetchStore
)
705 warning (_("cannot write register"));
709 /* On some targets (esp. simulators), we can always write
711 else if ((flags
& xtTargetFlagsNonVisibleRegs
) == 0)
713 warning (_("cannot write register"));
718 /* We can always write mapped registers. */
719 else if (type
== xtRegisterTypeMapped
|| type
== xtRegisterTypeTieState
)
721 xtensa_register_write_masked (regcache
, reg
, buffer
);
725 /* Assume that we can write the register. */
726 regcache_raw_write (regcache
, regnum
, buffer
);
729 internal_error (__FILE__
, __LINE__
,
730 _("invalid register number %d"), regnum
);
733 static struct reggroup
*xtensa_ar_reggroup
;
734 static struct reggroup
*xtensa_user_reggroup
;
735 static struct reggroup
*xtensa_vectra_reggroup
;
736 static struct reggroup
*xtensa_cp
[XTENSA_MAX_COPROCESSOR
];
739 xtensa_init_reggroups (void)
742 char cpname
[] = "cp0";
744 xtensa_ar_reggroup
= reggroup_new ("ar", USER_REGGROUP
);
745 xtensa_user_reggroup
= reggroup_new ("user", USER_REGGROUP
);
746 xtensa_vectra_reggroup
= reggroup_new ("vectra", USER_REGGROUP
);
748 for (i
= 0; i
< XTENSA_MAX_COPROCESSOR
; i
++)
751 xtensa_cp
[i
] = reggroup_new (cpname
, USER_REGGROUP
);
756 xtensa_add_reggroups (struct gdbarch
*gdbarch
)
760 /* Predefined groups. */
761 reggroup_add (gdbarch
, all_reggroup
);
762 reggroup_add (gdbarch
, save_reggroup
);
763 reggroup_add (gdbarch
, restore_reggroup
);
764 reggroup_add (gdbarch
, system_reggroup
);
765 reggroup_add (gdbarch
, vector_reggroup
);
766 reggroup_add (gdbarch
, general_reggroup
);
767 reggroup_add (gdbarch
, float_reggroup
);
769 /* Xtensa-specific groups. */
770 reggroup_add (gdbarch
, xtensa_ar_reggroup
);
771 reggroup_add (gdbarch
, xtensa_user_reggroup
);
772 reggroup_add (gdbarch
, xtensa_vectra_reggroup
);
774 for (i
= 0; i
< XTENSA_MAX_COPROCESSOR
; i
++)
775 reggroup_add (gdbarch
, xtensa_cp
[i
]);
779 xtensa_coprocessor_register_group (struct reggroup
*group
)
783 for (i
= 0; i
< XTENSA_MAX_COPROCESSOR
; i
++)
784 if (group
== xtensa_cp
[i
])
790 #define SAVE_REST_FLAGS (XTENSA_REGISTER_FLAGS_READABLE \
791 | XTENSA_REGISTER_FLAGS_WRITABLE \
792 | XTENSA_REGISTER_FLAGS_VOLATILE)
794 #define SAVE_REST_VALID (XTENSA_REGISTER_FLAGS_READABLE \
795 | XTENSA_REGISTER_FLAGS_WRITABLE)
798 xtensa_register_reggroup_p (struct gdbarch
*gdbarch
,
800 struct reggroup
*group
)
802 xtensa_register_t
* reg
= &gdbarch_tdep (gdbarch
)->regmap
[regnum
];
803 xtensa_register_type_t type
= reg
->type
;
804 xtensa_register_group_t rg
= reg
->group
;
807 if (group
== save_reggroup
)
808 /* Every single register should be included into the list of registers
809 to be watched for changes while using -data-list-changed-registers. */
812 /* First, skip registers that are not visible to this target
813 (unknown and unmapped registers when not using ISS). */
815 if (type
== xtRegisterTypeUnmapped
|| type
== xtRegisterTypeUnknown
)
817 if (group
== all_reggroup
)
819 if (group
== xtensa_ar_reggroup
)
820 return rg
& xtRegisterGroupAddrReg
;
821 if (group
== xtensa_user_reggroup
)
822 return rg
& xtRegisterGroupUser
;
823 if (group
== float_reggroup
)
824 return rg
& xtRegisterGroupFloat
;
825 if (group
== general_reggroup
)
826 return rg
& xtRegisterGroupGeneral
;
827 if (group
== system_reggroup
)
828 return rg
& xtRegisterGroupState
;
829 if (group
== vector_reggroup
|| group
== xtensa_vectra_reggroup
)
830 return rg
& xtRegisterGroupVectra
;
831 if (group
== restore_reggroup
)
832 return (regnum
< gdbarch_num_regs (gdbarch
)
833 && (reg
->flags
& SAVE_REST_FLAGS
) == SAVE_REST_VALID
);
834 cp_number
= xtensa_coprocessor_register_group (group
);
836 return rg
& (xtRegisterGroupCP0
<< cp_number
);
842 /* Supply register REGNUM from the buffer specified by GREGS and LEN
843 in the general-purpose register set REGSET to register cache
844 REGCACHE. If REGNUM is -1 do this for all registers in REGSET. */
847 xtensa_supply_gregset (const struct regset
*regset
,
853 const xtensa_elf_gregset_t
*regs
= gregs
;
854 struct gdbarch
*gdbarch
= get_regcache_arch (rc
);
857 DEBUGTRACE ("xtensa_supply_gregset (..., regnum==%d, ...)\n", regnum
);
859 if (regnum
== gdbarch_pc_regnum (gdbarch
) || regnum
== -1)
860 regcache_raw_supply (rc
, gdbarch_pc_regnum (gdbarch
), (char *) ®s
->pc
);
861 if (regnum
== gdbarch_ps_regnum (gdbarch
) || regnum
== -1)
862 regcache_raw_supply (rc
, gdbarch_ps_regnum (gdbarch
), (char *) ®s
->ps
);
863 if (regnum
== gdbarch_tdep (gdbarch
)->wb_regnum
|| regnum
== -1)
864 regcache_raw_supply (rc
, gdbarch_tdep (gdbarch
)->wb_regnum
,
865 (char *) ®s
->windowbase
);
866 if (regnum
== gdbarch_tdep (gdbarch
)->ws_regnum
|| regnum
== -1)
867 regcache_raw_supply (rc
, gdbarch_tdep (gdbarch
)->ws_regnum
,
868 (char *) ®s
->windowstart
);
869 if (regnum
== gdbarch_tdep (gdbarch
)->lbeg_regnum
|| regnum
== -1)
870 regcache_raw_supply (rc
, gdbarch_tdep (gdbarch
)->lbeg_regnum
,
871 (char *) ®s
->lbeg
);
872 if (regnum
== gdbarch_tdep (gdbarch
)->lend_regnum
|| regnum
== -1)
873 regcache_raw_supply (rc
, gdbarch_tdep (gdbarch
)->lend_regnum
,
874 (char *) ®s
->lend
);
875 if (regnum
== gdbarch_tdep (gdbarch
)->lcount_regnum
|| regnum
== -1)
876 regcache_raw_supply (rc
, gdbarch_tdep (gdbarch
)->lcount_regnum
,
877 (char *) ®s
->lcount
);
878 if (regnum
== gdbarch_tdep (gdbarch
)->sar_regnum
|| regnum
== -1)
879 regcache_raw_supply (rc
, gdbarch_tdep (gdbarch
)->sar_regnum
,
880 (char *) ®s
->sar
);
881 if (regnum
>=gdbarch_tdep (gdbarch
)->ar_base
882 && regnum
< gdbarch_tdep (gdbarch
)->ar_base
883 + gdbarch_tdep (gdbarch
)->num_aregs
)
884 regcache_raw_supply (rc
, regnum
,
885 (char *) ®s
->ar
[regnum
- gdbarch_tdep
886 (gdbarch
)->ar_base
]);
887 else if (regnum
== -1)
889 for (i
= 0; i
< gdbarch_tdep (gdbarch
)->num_aregs
; ++i
)
890 regcache_raw_supply (rc
, gdbarch_tdep (gdbarch
)->ar_base
+ i
,
891 (char *) ®s
->ar
[i
]);
896 /* Xtensa register set. */
902 xtensa_supply_gregset
906 /* Iterate over supported core file register note sections. */
909 xtensa_iterate_over_regset_sections (struct gdbarch
*gdbarch
,
910 iterate_over_regset_sections_cb
*cb
,
912 const struct regcache
*regcache
)
914 DEBUGTRACE ("xtensa_iterate_over_regset_sections\n");
916 cb (".reg", sizeof (xtensa_elf_gregset_t
), &xtensa_gregset
,
921 /* Handling frames. */
923 /* Number of registers to save in case of Windowed ABI. */
924 #define XTENSA_NUM_SAVED_AREGS 12
926 /* Frame cache part for Windowed ABI. */
927 typedef struct xtensa_windowed_frame_cache
929 int wb
; /* WINDOWBASE of the previous frame. */
930 int callsize
; /* Call size of this frame. */
931 int ws
; /* WINDOWSTART of the previous frame. It keeps track of
932 life windows only. If there is no bit set for the
933 window, that means it had been already spilled
934 because of window overflow. */
936 /* Addresses of spilled A-registers.
937 AREGS[i] == -1, if corresponding AR is alive. */
938 CORE_ADDR aregs
[XTENSA_NUM_SAVED_AREGS
];
939 } xtensa_windowed_frame_cache_t
;
941 /* Call0 ABI Definitions. */
943 #define C0_MAXOPDS 3 /* Maximum number of operands for prologue
945 #define C0_NREGS 16 /* Number of A-registers to track. */
946 #define C0_CLESV 12 /* Callee-saved registers are here and up. */
947 #define C0_SP 1 /* Register used as SP. */
948 #define C0_FP 15 /* Register used as FP. */
949 #define C0_RA 0 /* Register used as return address. */
950 #define C0_ARGS 2 /* Register used as first arg/retval. */
951 #define C0_NARGS 6 /* Number of A-regs for args/retvals. */
953 /* Each element of xtensa_call0_frame_cache.c0_rt[] describes for each
954 A-register where the current content of the reg came from (in terms
955 of an original reg and a constant). Negative values of c0_rt[n].fp_reg
956 mean that the orignal content of the register was saved to the stack.
957 c0_rt[n].fr.ofs is NOT the offset from the frame base because we don't
958 know where SP will end up until the entire prologue has been analyzed. */
960 #define C0_CONST -1 /* fr_reg value if register contains a constant. */
961 #define C0_INEXP -2 /* fr_reg value if inexpressible as reg + offset. */
962 #define C0_NOSTK -1 /* to_stk value if register has not been stored. */
964 extern xtensa_isa xtensa_default_isa
;
966 typedef struct xtensa_c0reg
968 int fr_reg
; /* original register from which register content
969 is derived, or C0_CONST, or C0_INEXP. */
970 int fr_ofs
; /* constant offset from reg, or immediate value. */
971 int to_stk
; /* offset from original SP to register (4-byte aligned),
972 or C0_NOSTK if register has not been saved. */
975 /* Frame cache part for Call0 ABI. */
976 typedef struct xtensa_call0_frame_cache
978 int c0_frmsz
; /* Stack frame size. */
979 int c0_hasfp
; /* Current frame uses frame pointer. */
980 int fp_regnum
; /* A-register used as FP. */
981 int c0_fp
; /* Actual value of frame pointer. */
982 int c0_fpalign
; /* Dinamic adjustment for the stack
983 pointer. It's an AND mask. Zero,
984 if alignment was not adjusted. */
985 int c0_old_sp
; /* In case of dynamic adjustment, it is
986 a register holding unaligned sp.
987 C0_INEXP, when undefined. */
988 int c0_sp_ofs
; /* If "c0_old_sp" was spilled it's a
989 stack offset. C0_NOSTK otherwise. */
991 xtensa_c0reg_t c0_rt
[C0_NREGS
]; /* Register tracking information. */
992 } xtensa_call0_frame_cache_t
;
994 typedef struct xtensa_frame_cache
996 CORE_ADDR base
; /* Stack pointer of this frame. */
997 CORE_ADDR pc
; /* PC of this frame at the function entry point. */
998 CORE_ADDR ra
; /* The raw return address of this frame. */
999 CORE_ADDR ps
; /* The PS register of the previous (older) frame. */
1000 CORE_ADDR prev_sp
; /* Stack Pointer of the previous (older) frame. */
1001 int call0
; /* It's a call0 framework (else windowed). */
1004 xtensa_windowed_frame_cache_t wd
; /* call0 == false. */
1005 xtensa_call0_frame_cache_t c0
; /* call0 == true. */
1007 } xtensa_frame_cache_t
;
1010 static struct xtensa_frame_cache
*
1011 xtensa_alloc_frame_cache (int windowed
)
1013 xtensa_frame_cache_t
*cache
;
1016 DEBUGTRACE ("xtensa_alloc_frame_cache ()\n");
1018 cache
= FRAME_OBSTACK_ZALLOC (xtensa_frame_cache_t
);
1025 cache
->call0
= !windowed
;
1028 cache
->c0
.c0_frmsz
= -1;
1029 cache
->c0
.c0_hasfp
= 0;
1030 cache
->c0
.fp_regnum
= -1;
1031 cache
->c0
.c0_fp
= -1;
1032 cache
->c0
.c0_fpalign
= 0;
1033 cache
->c0
.c0_old_sp
= C0_INEXP
;
1034 cache
->c0
.c0_sp_ofs
= C0_NOSTK
;
1036 for (i
= 0; i
< C0_NREGS
; i
++)
1038 cache
->c0
.c0_rt
[i
].fr_reg
= i
;
1039 cache
->c0
.c0_rt
[i
].fr_ofs
= 0;
1040 cache
->c0
.c0_rt
[i
].to_stk
= C0_NOSTK
;
1047 cache
->wd
.callsize
= -1;
1049 for (i
= 0; i
< XTENSA_NUM_SAVED_AREGS
; i
++)
1050 cache
->wd
.aregs
[i
] = -1;
1057 xtensa_frame_align (struct gdbarch
*gdbarch
, CORE_ADDR address
)
1059 return address
& ~15;
1064 xtensa_unwind_pc (struct gdbarch
*gdbarch
, struct frame_info
*next_frame
)
1069 DEBUGTRACE ("xtensa_unwind_pc (next_frame = %s)\n",
1070 host_address_to_string (next_frame
));
1072 frame_unwind_register (next_frame
, gdbarch_pc_regnum (gdbarch
), buf
);
1073 pc
= extract_typed_address (buf
, builtin_type (gdbarch
)->builtin_func_ptr
);
1075 DEBUGINFO ("[xtensa_unwind_pc] pc = 0x%08x\n", (unsigned int) pc
);
1081 static struct frame_id
1082 xtensa_dummy_id (struct gdbarch
*gdbarch
, struct frame_info
*this_frame
)
1086 /* THIS-FRAME is a dummy frame. Return a frame ID of that frame. */
1088 pc
= get_frame_pc (this_frame
);
1089 fp
= get_frame_register_unsigned
1090 (this_frame
, gdbarch_tdep (gdbarch
)->a0_base
+ 1);
1092 /* Make dummy frame ID unique by adding a constant. */
1093 return frame_id_build (fp
+ SP_ALIGNMENT
, pc
);
1096 /* Returns true, if instruction to execute next is unique to Xtensa Window
1097 Interrupt Handlers. It can only be one of L32E, S32E, RFWO, or RFWU. */
1100 xtensa_window_interrupt_insn (struct gdbarch
*gdbarch
, CORE_ADDR pc
)
1102 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
1103 unsigned int insn
= read_memory_integer (pc
, 4, byte_order
);
1106 if (byte_order
== BFD_ENDIAN_BIG
)
1108 /* Check, if this is L32E or S32E. */
1109 code
= insn
& 0xf000ff00;
1110 if ((code
== 0x00009000) || (code
== 0x00009400))
1112 /* Check, if this is RFWU or RFWO. */
1113 code
= insn
& 0xffffff00;
1114 return ((code
== 0x00430000) || (code
== 0x00530000));
1118 /* Check, if this is L32E or S32E. */
1119 code
= insn
& 0x00ff000f;
1120 if ((code
== 0x090000) || (code
== 0x490000))
1122 /* Check, if this is RFWU or RFWO. */
1123 code
= insn
& 0x00ffffff;
1124 return ((code
== 0x00003400) || (code
== 0x00003500));
1128 /* Returns the best guess about which register is a frame pointer
1129 for the function containing CURRENT_PC. */
1131 #define XTENSA_ISA_BSZ 32 /* Instruction buffer size. */
1132 #define XTENSA_ISA_BADPC ((CORE_ADDR)0) /* Bad PC value. */
1135 xtensa_scan_prologue (struct gdbarch
*gdbarch
, CORE_ADDR current_pc
)
1137 #define RETURN_FP goto done
1139 unsigned int fp_regnum
= gdbarch_tdep (gdbarch
)->a0_base
+ 1;
1140 CORE_ADDR start_addr
;
1142 xtensa_insnbuf ins
, slot
;
1143 gdb_byte ibuf
[XTENSA_ISA_BSZ
];
1144 CORE_ADDR ia
, bt
, ba
;
1146 int ilen
, islots
, is
;
1148 const char *opcname
;
1150 find_pc_partial_function (current_pc
, NULL
, &start_addr
, NULL
);
1151 if (start_addr
== 0)
1154 if (!xtensa_default_isa
)
1155 xtensa_default_isa
= xtensa_isa_init (0, 0);
1156 isa
= xtensa_default_isa
;
1157 gdb_assert (XTENSA_ISA_BSZ
>= xtensa_isa_maxlength (isa
));
1158 ins
= xtensa_insnbuf_alloc (isa
);
1159 slot
= xtensa_insnbuf_alloc (isa
);
1162 for (ia
= start_addr
, bt
= ia
; ia
< current_pc
; ia
+= ilen
)
1164 if (ia
+ xtensa_isa_maxlength (isa
) > bt
)
1167 bt
= (ba
+ XTENSA_ISA_BSZ
) < current_pc
1168 ? ba
+ XTENSA_ISA_BSZ
: current_pc
;
1169 if (target_read_memory (ba
, ibuf
, bt
- ba
) != 0)
1173 xtensa_insnbuf_from_chars (isa
, ins
, &ibuf
[ia
-ba
], 0);
1174 ifmt
= xtensa_format_decode (isa
, ins
);
1175 if (ifmt
== XTENSA_UNDEFINED
)
1177 ilen
= xtensa_format_length (isa
, ifmt
);
1178 if (ilen
== XTENSA_UNDEFINED
)
1180 islots
= xtensa_format_num_slots (isa
, ifmt
);
1181 if (islots
== XTENSA_UNDEFINED
)
1184 for (is
= 0; is
< islots
; ++is
)
1186 if (xtensa_format_get_slot (isa
, ifmt
, is
, ins
, slot
))
1189 opc
= xtensa_opcode_decode (isa
, ifmt
, is
, slot
);
1190 if (opc
== XTENSA_UNDEFINED
)
1193 opcname
= xtensa_opcode_name (isa
, opc
);
1195 if (strcasecmp (opcname
, "mov.n") == 0
1196 || strcasecmp (opcname
, "or") == 0)
1198 unsigned int register_operand
;
1200 /* Possible candidate for setting frame pointer
1201 from A1. This is what we are looking for. */
1203 if (xtensa_operand_get_field (isa
, opc
, 1, ifmt
,
1204 is
, slot
, ®ister_operand
) != 0)
1206 if (xtensa_operand_decode (isa
, opc
, 1, ®ister_operand
) != 0)
1208 if (register_operand
== 1) /* Mov{.n} FP A1. */
1210 if (xtensa_operand_get_field (isa
, opc
, 0, ifmt
, is
, slot
,
1211 ®ister_operand
) != 0)
1213 if (xtensa_operand_decode (isa
, opc
, 0,
1214 ®ister_operand
) != 0)
1218 = gdbarch_tdep (gdbarch
)->a0_base
+ register_operand
;
1224 /* We have problems decoding the memory. */
1226 || strcasecmp (opcname
, "ill") == 0
1227 || strcasecmp (opcname
, "ill.n") == 0
1228 /* Hit planted breakpoint. */
1229 || strcasecmp (opcname
, "break") == 0
1230 || strcasecmp (opcname
, "break.n") == 0
1231 /* Flow control instructions finish prologue. */
1232 || xtensa_opcode_is_branch (isa
, opc
) > 0
1233 || xtensa_opcode_is_jump (isa
, opc
) > 0
1234 || xtensa_opcode_is_loop (isa
, opc
) > 0
1235 || xtensa_opcode_is_call (isa
, opc
) > 0
1236 || strcasecmp (opcname
, "simcall") == 0
1237 || strcasecmp (opcname
, "syscall") == 0)
1238 /* Can not continue analysis. */
1243 xtensa_insnbuf_free(isa
, slot
);
1244 xtensa_insnbuf_free(isa
, ins
);
1248 /* The key values to identify the frame using "cache" are
1250 cache->base = SP (or best guess about FP) of this frame;
1251 cache->pc = entry-PC (entry point of the frame function);
1252 cache->prev_sp = SP of the previous frame. */
1255 call0_frame_cache (struct frame_info
*this_frame
,
1256 xtensa_frame_cache_t
*cache
, CORE_ADDR pc
);
1259 xtensa_window_interrupt_frame_cache (struct frame_info
*this_frame
,
1260 xtensa_frame_cache_t
*cache
,
1263 static struct xtensa_frame_cache
*
1264 xtensa_frame_cache (struct frame_info
*this_frame
, void **this_cache
)
1266 xtensa_frame_cache_t
*cache
;
1267 CORE_ADDR ra
, wb
, ws
, pc
, sp
, ps
;
1268 struct gdbarch
*gdbarch
= get_frame_arch (this_frame
);
1269 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
1270 unsigned int fp_regnum
;
1271 int windowed
, ps_regnum
;
1276 pc
= get_frame_register_unsigned (this_frame
, gdbarch_pc_regnum (gdbarch
));
1277 ps_regnum
= gdbarch_ps_regnum (gdbarch
);
1278 ps
= (ps_regnum
>= 0
1279 ? get_frame_register_unsigned (this_frame
, ps_regnum
) : TX_PS
);
1281 windowed
= windowing_enabled (gdbarch
, ps
);
1283 /* Get pristine xtensa-frame. */
1284 cache
= xtensa_alloc_frame_cache (windowed
);
1285 *this_cache
= cache
;
1291 /* Get WINDOWBASE, WINDOWSTART, and PS registers. */
1292 wb
= get_frame_register_unsigned (this_frame
,
1293 gdbarch_tdep (gdbarch
)->wb_regnum
);
1294 ws
= get_frame_register_unsigned (this_frame
,
1295 gdbarch_tdep (gdbarch
)->ws_regnum
);
1297 op1
= read_memory_integer (pc
, 1, byte_order
);
1298 if (XTENSA_IS_ENTRY (gdbarch
, op1
))
1300 int callinc
= CALLINC (ps
);
1301 ra
= get_frame_register_unsigned
1302 (this_frame
, gdbarch_tdep (gdbarch
)->a0_base
+ callinc
* 4);
1304 /* ENTRY hasn't been executed yet, therefore callsize is still 0. */
1305 cache
->wd
.callsize
= 0;
1308 cache
->prev_sp
= get_frame_register_unsigned
1309 (this_frame
, gdbarch_tdep (gdbarch
)->a0_base
+ 1);
1311 /* This only can be the outermost frame since we are
1312 just about to execute ENTRY. SP hasn't been set yet.
1313 We can assume any frame size, because it does not
1314 matter, and, let's fake frame base in cache. */
1315 cache
->base
= cache
->prev_sp
- 16;
1318 cache
->ra
= (cache
->pc
& 0xc0000000) | (ra
& 0x3fffffff);
1319 cache
->ps
= (ps
& ~PS_CALLINC_MASK
)
1320 | ((WINSIZE(ra
)/4) << PS_CALLINC_SHIFT
);
1326 fp_regnum
= xtensa_scan_prologue (gdbarch
, pc
);
1327 ra
= get_frame_register_unsigned (this_frame
,
1328 gdbarch_tdep (gdbarch
)->a0_base
);
1329 cache
->wd
.callsize
= WINSIZE (ra
);
1330 cache
->wd
.wb
= (wb
- cache
->wd
.callsize
/ 4)
1331 & (gdbarch_tdep (gdbarch
)->num_aregs
/ 4 - 1);
1332 cache
->wd
.ws
= ws
& ~(1 << wb
);
1334 cache
->pc
= get_frame_func (this_frame
);
1335 cache
->ra
= (pc
& 0xc0000000) | (ra
& 0x3fffffff);
1336 cache
->ps
= (ps
& ~PS_CALLINC_MASK
)
1337 | ((WINSIZE(ra
)/4) << PS_CALLINC_SHIFT
);
1340 if (cache
->wd
.ws
== 0)
1345 sp
= get_frame_register_unsigned
1346 (this_frame
, gdbarch_tdep (gdbarch
)->a0_base
+ 1) - 16;
1348 for (i
= 0; i
< 4; i
++, sp
+= 4)
1350 cache
->wd
.aregs
[i
] = sp
;
1353 if (cache
->wd
.callsize
> 4)
1355 /* Set A4...A7/A11. */
1356 /* Get the SP of the frame previous to the previous one.
1357 To achieve this, we have to dereference SP twice. */
1358 sp
= (CORE_ADDR
) read_memory_integer (sp
- 12, 4, byte_order
);
1359 sp
= (CORE_ADDR
) read_memory_integer (sp
- 12, 4, byte_order
);
1360 sp
-= cache
->wd
.callsize
* 4;
1362 for ( i
= 4; i
< cache
->wd
.callsize
; i
++, sp
+= 4)
1364 cache
->wd
.aregs
[i
] = sp
;
1369 if ((cache
->prev_sp
== 0) && ( ra
!= 0 ))
1370 /* If RA is equal to 0 this frame is an outermost frame. Leave
1371 cache->prev_sp unchanged marking the boundary of the frame stack. */
1373 if ((cache
->wd
.ws
& (1 << cache
->wd
.wb
)) == 0)
1375 /* Register window overflow already happened.
1376 We can read caller's SP from the proper spill loction. */
1377 sp
= get_frame_register_unsigned
1378 (this_frame
, gdbarch_tdep (gdbarch
)->a0_base
+ 1);
1379 cache
->prev_sp
= read_memory_integer (sp
- 12, 4, byte_order
);
1383 /* Read caller's frame SP directly from the previous window. */
1384 int regnum
= arreg_number
1385 (gdbarch
, gdbarch_tdep (gdbarch
)->a0_base
+ 1,
1388 cache
->prev_sp
= xtensa_read_register (regnum
);
1392 else if (xtensa_window_interrupt_insn (gdbarch
, pc
))
1394 /* Execution stopped inside Xtensa Window Interrupt Handler. */
1396 xtensa_window_interrupt_frame_cache (this_frame
, cache
, pc
);
1397 /* Everything was set already, including cache->base. */
1400 else /* Call0 framework. */
1402 call0_frame_cache (this_frame
, cache
, pc
);
1403 fp_regnum
= cache
->c0
.fp_regnum
;
1406 cache
->base
= get_frame_register_unsigned (this_frame
, fp_regnum
);
1411 static int xtensa_session_once_reported
= 1;
1413 /* Report a problem with prologue analysis while doing backtracing.
1414 But, do it only once to avoid annoyng repeated messages. */
1419 if (xtensa_session_once_reported
== 0)
1421 \nUnrecognised function prologue. Stack trace cannot be resolved. \
1422 This message will not be repeated in this session.\n"));
1424 xtensa_session_once_reported
= 1;
1429 xtensa_frame_this_id (struct frame_info
*this_frame
,
1431 struct frame_id
*this_id
)
1433 struct xtensa_frame_cache
*cache
=
1434 xtensa_frame_cache (this_frame
, this_cache
);
1436 if (cache
->prev_sp
== 0)
1439 (*this_id
) = frame_id_build (cache
->prev_sp
, cache
->pc
);
1442 static struct value
*
1443 xtensa_frame_prev_register (struct frame_info
*this_frame
,
1447 struct gdbarch
*gdbarch
= get_frame_arch (this_frame
);
1448 struct xtensa_frame_cache
*cache
;
1449 ULONGEST saved_reg
= 0;
1452 if (*this_cache
== NULL
)
1453 *this_cache
= xtensa_frame_cache (this_frame
, this_cache
);
1454 cache
= *this_cache
;
1456 if (regnum
==gdbarch_pc_regnum (gdbarch
))
1457 saved_reg
= cache
->ra
;
1458 else if (regnum
== gdbarch_tdep (gdbarch
)->a0_base
+ 1)
1459 saved_reg
= cache
->prev_sp
;
1460 else if (!cache
->call0
)
1462 if (regnum
== gdbarch_tdep (gdbarch
)->ws_regnum
)
1463 saved_reg
= cache
->wd
.ws
;
1464 else if (regnum
== gdbarch_tdep (gdbarch
)->wb_regnum
)
1465 saved_reg
= cache
->wd
.wb
;
1466 else if (regnum
== gdbarch_ps_regnum (gdbarch
))
1467 saved_reg
= cache
->ps
;
1475 return frame_unwind_got_constant (this_frame
, regnum
, saved_reg
);
1477 if (!cache
->call0
) /* Windowed ABI. */
1479 /* Convert A-register numbers to AR-register numbers,
1480 if we deal with A-register. */
1481 if (regnum
>= gdbarch_tdep (gdbarch
)->a0_base
1482 && regnum
<= gdbarch_tdep (gdbarch
)->a0_base
+ 15)
1483 regnum
= arreg_number (gdbarch
, regnum
, cache
->wd
.wb
);
1485 /* Check, if we deal with AR-register saved on stack. */
1486 if (regnum
>= gdbarch_tdep (gdbarch
)->ar_base
1487 && regnum
<= (gdbarch_tdep (gdbarch
)->ar_base
1488 + gdbarch_tdep (gdbarch
)->num_aregs
))
1490 int areg
= areg_number (gdbarch
, regnum
, cache
->wd
.wb
);
1493 && areg
< XTENSA_NUM_SAVED_AREGS
1494 && cache
->wd
.aregs
[areg
] != -1)
1495 return frame_unwind_got_memory (this_frame
, regnum
,
1496 cache
->wd
.aregs
[areg
]);
1499 else /* Call0 ABI. */
1501 int reg
= (regnum
>= gdbarch_tdep (gdbarch
)->ar_base
1502 && regnum
<= (gdbarch_tdep (gdbarch
)->ar_base
1504 ? regnum
- gdbarch_tdep (gdbarch
)->ar_base
: regnum
;
1511 /* If register was saved in the prologue, retrieve it. */
1512 stkofs
= cache
->c0
.c0_rt
[reg
].to_stk
;
1513 if (stkofs
!= C0_NOSTK
)
1515 /* Determine SP on entry based on FP. */
1516 spe
= cache
->c0
.c0_fp
1517 - cache
->c0
.c0_rt
[cache
->c0
.fp_regnum
].fr_ofs
;
1519 return frame_unwind_got_memory (this_frame
, regnum
,
1525 /* All other registers have been either saved to
1526 the stack or are still alive in the processor. */
1528 return frame_unwind_got_register (this_frame
, regnum
, regnum
);
1532 static const struct frame_unwind
1536 default_frame_unwind_stop_reason
,
1537 xtensa_frame_this_id
,
1538 xtensa_frame_prev_register
,
1540 default_frame_sniffer
1544 xtensa_frame_base_address (struct frame_info
*this_frame
, void **this_cache
)
1546 struct xtensa_frame_cache
*cache
=
1547 xtensa_frame_cache (this_frame
, this_cache
);
1552 static const struct frame_base
1556 xtensa_frame_base_address
,
1557 xtensa_frame_base_address
,
1558 xtensa_frame_base_address
1563 xtensa_extract_return_value (struct type
*type
,
1564 struct regcache
*regcache
,
1567 struct gdbarch
*gdbarch
= get_regcache_arch (regcache
);
1568 bfd_byte
*valbuf
= dst
;
1569 int len
= TYPE_LENGTH (type
);
1574 DEBUGTRACE ("xtensa_extract_return_value (...)\n");
1576 gdb_assert(len
> 0);
1578 if (gdbarch_tdep (gdbarch
)->call_abi
!= CallAbiCall0Only
)
1580 /* First, we have to find the caller window in the register file. */
1581 regcache_raw_read_unsigned (regcache
, gdbarch_pc_regnum (gdbarch
), &pc
);
1582 callsize
= extract_call_winsize (gdbarch
, pc
);
1584 /* On Xtensa, we can return up to 4 words (or 2 for call12). */
1585 if (len
> (callsize
> 8 ? 8 : 16))
1586 internal_error (__FILE__
, __LINE__
,
1587 _("cannot extract return value of %d bytes long"),
1590 /* Get the register offset of the return
1591 register (A2) in the caller window. */
1592 regcache_raw_read_unsigned
1593 (regcache
, gdbarch_tdep (gdbarch
)->wb_regnum
, &wb
);
1594 areg
= arreg_number (gdbarch
,
1595 gdbarch_tdep (gdbarch
)->a0_base
+ 2 + callsize
, wb
);
1599 /* No windowing hardware - Call0 ABI. */
1600 areg
= gdbarch_tdep (gdbarch
)->a0_base
+ C0_ARGS
;
1603 DEBUGINFO ("[xtensa_extract_return_value] areg %d len %d\n", areg
, len
);
1605 if (len
< 4 && gdbarch_byte_order (gdbarch
) == BFD_ENDIAN_BIG
)
1608 for (; len
> 0; len
-= 4, areg
++, valbuf
+= 4)
1611 regcache_raw_read_part (regcache
, areg
, offset
, len
, valbuf
);
1613 regcache_raw_read (regcache
, areg
, valbuf
);
1619 xtensa_store_return_value (struct type
*type
,
1620 struct regcache
*regcache
,
1623 struct gdbarch
*gdbarch
= get_regcache_arch (regcache
);
1624 const bfd_byte
*valbuf
= dst
;
1628 int len
= TYPE_LENGTH (type
);
1631 DEBUGTRACE ("xtensa_store_return_value (...)\n");
1633 if (gdbarch_tdep (gdbarch
)->call_abi
!= CallAbiCall0Only
)
1635 regcache_raw_read_unsigned
1636 (regcache
, gdbarch_tdep (gdbarch
)->wb_regnum
, &wb
);
1637 regcache_raw_read_unsigned (regcache
, gdbarch_pc_regnum (gdbarch
), &pc
);
1638 callsize
= extract_call_winsize (gdbarch
, pc
);
1640 if (len
> (callsize
> 8 ? 8 : 16))
1641 internal_error (__FILE__
, __LINE__
,
1642 _("unimplemented for this length: %d"),
1643 TYPE_LENGTH (type
));
1644 areg
= arreg_number (gdbarch
,
1645 gdbarch_tdep (gdbarch
)->a0_base
+ 2 + callsize
, wb
);
1647 DEBUGTRACE ("[xtensa_store_return_value] callsize %d wb %d\n",
1648 callsize
, (int) wb
);
1652 areg
= gdbarch_tdep (gdbarch
)->a0_base
+ C0_ARGS
;
1655 if (len
< 4 && gdbarch_byte_order (gdbarch
) == BFD_ENDIAN_BIG
)
1658 for (; len
> 0; len
-= 4, areg
++, valbuf
+= 4)
1661 regcache_raw_write_part (regcache
, areg
, offset
, len
, valbuf
);
1663 regcache_raw_write (regcache
, areg
, valbuf
);
1668 static enum return_value_convention
1669 xtensa_return_value (struct gdbarch
*gdbarch
,
1670 struct value
*function
,
1671 struct type
*valtype
,
1672 struct regcache
*regcache
,
1674 const gdb_byte
*writebuf
)
1676 /* Structures up to 16 bytes are returned in registers. */
1678 int struct_return
= ((TYPE_CODE (valtype
) == TYPE_CODE_STRUCT
1679 || TYPE_CODE (valtype
) == TYPE_CODE_UNION
1680 || TYPE_CODE (valtype
) == TYPE_CODE_ARRAY
)
1681 && TYPE_LENGTH (valtype
) > 16);
1684 return RETURN_VALUE_STRUCT_CONVENTION
;
1686 DEBUGTRACE ("xtensa_return_value(...)\n");
1688 if (writebuf
!= NULL
)
1690 xtensa_store_return_value (valtype
, regcache
, writebuf
);
1693 if (readbuf
!= NULL
)
1695 gdb_assert (!struct_return
);
1696 xtensa_extract_return_value (valtype
, regcache
, readbuf
);
1698 return RETURN_VALUE_REGISTER_CONVENTION
;
1705 xtensa_push_dummy_call (struct gdbarch
*gdbarch
,
1706 struct value
*function
,
1707 struct regcache
*regcache
,
1710 struct value
**args
,
1713 CORE_ADDR struct_addr
)
1715 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
1717 int size
, onstack_size
;
1718 gdb_byte
*buf
= (gdb_byte
*) alloca (16);
1720 struct argument_info
1722 const bfd_byte
*contents
;
1724 int onstack
; /* onstack == 0 => in reg */
1725 int align
; /* alignment */
1728 int offset
; /* stack offset if on stack. */
1729 int regno
; /* regno if in register. */
1733 struct argument_info
*arg_info
=
1734 (struct argument_info
*) alloca (nargs
* sizeof (struct argument_info
));
1738 DEBUGTRACE ("xtensa_push_dummy_call (...)\n");
1740 if (xtensa_debug_level
> 3)
1743 DEBUGINFO ("[xtensa_push_dummy_call] nargs = %d\n", nargs
);
1744 DEBUGINFO ("[xtensa_push_dummy_call] sp=0x%x, struct_return=%d, "
1745 "struct_addr=0x%x\n",
1746 (int) sp
, (int) struct_return
, (int) struct_addr
);
1748 for (i
= 0; i
< nargs
; i
++)
1750 struct value
*arg
= args
[i
];
1751 struct type
*arg_type
= check_typedef (value_type (arg
));
1752 fprintf_unfiltered (gdb_stdlog
, "%2d: %s %3d ", i
,
1753 host_address_to_string (arg
),
1754 TYPE_LENGTH (arg_type
));
1755 switch (TYPE_CODE (arg_type
))
1758 fprintf_unfiltered (gdb_stdlog
, "int");
1760 case TYPE_CODE_STRUCT
:
1761 fprintf_unfiltered (gdb_stdlog
, "struct");
1764 fprintf_unfiltered (gdb_stdlog
, "%3d", TYPE_CODE (arg_type
));
1767 fprintf_unfiltered (gdb_stdlog
, " %s\n",
1768 host_address_to_string (value_contents (arg
)));
1772 /* First loop: collect information.
1773 Cast into type_long. (This shouldn't happen often for C because
1774 GDB already does this earlier.) It's possible that GDB could
1775 do it all the time but it's harmless to leave this code here. */
1782 size
= REGISTER_SIZE
;
1784 for (i
= 0; i
< nargs
; i
++)
1786 struct argument_info
*info
= &arg_info
[i
];
1787 struct value
*arg
= args
[i
];
1788 struct type
*arg_type
= check_typedef (value_type (arg
));
1790 switch (TYPE_CODE (arg_type
))
1793 case TYPE_CODE_BOOL
:
1794 case TYPE_CODE_CHAR
:
1795 case TYPE_CODE_RANGE
:
1796 case TYPE_CODE_ENUM
:
1798 /* Cast argument to long if necessary as the mask does it too. */
1799 if (TYPE_LENGTH (arg_type
)
1800 < TYPE_LENGTH (builtin_type (gdbarch
)->builtin_long
))
1802 arg_type
= builtin_type (gdbarch
)->builtin_long
;
1803 arg
= value_cast (arg_type
, arg
);
1805 /* Aligment is equal to the type length for the basic types. */
1806 info
->align
= TYPE_LENGTH (arg_type
);
1811 /* Align doubles correctly. */
1812 if (TYPE_LENGTH (arg_type
)
1813 == TYPE_LENGTH (builtin_type (gdbarch
)->builtin_double
))
1814 info
->align
= TYPE_LENGTH (builtin_type (gdbarch
)->builtin_double
);
1816 info
->align
= TYPE_LENGTH (builtin_type (gdbarch
)->builtin_long
);
1819 case TYPE_CODE_STRUCT
:
1821 info
->align
= TYPE_LENGTH (builtin_type (gdbarch
)->builtin_long
);
1824 info
->length
= TYPE_LENGTH (arg_type
);
1825 info
->contents
= value_contents (arg
);
1827 /* Align size and onstack_size. */
1828 size
= (size
+ info
->align
- 1) & ~(info
->align
- 1);
1829 onstack_size
= (onstack_size
+ info
->align
- 1) & ~(info
->align
- 1);
1831 if (size
+ info
->length
> REGISTER_SIZE
* ARG_NOF (gdbarch
))
1834 info
->u
.offset
= onstack_size
;
1835 onstack_size
+= info
->length
;
1840 info
->u
.regno
= ARG_1ST (gdbarch
) + size
/ REGISTER_SIZE
;
1842 size
+= info
->length
;
1845 /* Adjust the stack pointer and align it. */
1846 sp
= align_down (sp
- onstack_size
, SP_ALIGNMENT
);
1848 /* Simulate MOVSP, if Windowed ABI. */
1849 if ((gdbarch_tdep (gdbarch
)->call_abi
!= CallAbiCall0Only
)
1852 read_memory (osp
- 16, buf
, 16);
1853 write_memory (sp
- 16, buf
, 16);
1856 /* Second Loop: Load arguments. */
1860 store_unsigned_integer (buf
, REGISTER_SIZE
, byte_order
, struct_addr
);
1861 regcache_cooked_write (regcache
, ARG_1ST (gdbarch
), buf
);
1864 for (i
= 0; i
< nargs
; i
++)
1866 struct argument_info
*info
= &arg_info
[i
];
1870 int n
= info
->length
;
1871 CORE_ADDR offset
= sp
+ info
->u
.offset
;
1873 /* Odd-sized structs are aligned to the lower side of a memory
1874 word in big-endian mode and require a shift. This only
1875 applies for structures smaller than one word. */
1877 if (n
< REGISTER_SIZE
1878 && gdbarch_byte_order (gdbarch
) == BFD_ENDIAN_BIG
)
1879 offset
+= (REGISTER_SIZE
- n
);
1881 write_memory (offset
, info
->contents
, info
->length
);
1886 int n
= info
->length
;
1887 const bfd_byte
*cp
= info
->contents
;
1888 int r
= info
->u
.regno
;
1890 /* Odd-sized structs are aligned to the lower side of registers in
1891 big-endian mode and require a shift. The odd-sized leftover will
1892 be at the end. Note that this is only true for structures smaller
1893 than REGISTER_SIZE; for larger odd-sized structures the excess
1894 will be left-aligned in the register on both endiannesses. */
1896 if (n
< REGISTER_SIZE
&& byte_order
== BFD_ENDIAN_BIG
)
1899 v
= extract_unsigned_integer (cp
, REGISTER_SIZE
, byte_order
);
1900 v
= v
>> ((REGISTER_SIZE
- n
) * TARGET_CHAR_BIT
);
1902 store_unsigned_integer (buf
, REGISTER_SIZE
, byte_order
, v
);
1903 regcache_cooked_write (regcache
, r
, buf
);
1905 cp
+= REGISTER_SIZE
;
1912 regcache_cooked_write (regcache
, r
, cp
);
1914 cp
+= REGISTER_SIZE
;
1921 /* Set the return address of dummy frame to the dummy address.
1922 The return address for the current function (in A0) is
1923 saved in the dummy frame, so we can savely overwrite A0 here. */
1925 if (gdbarch_tdep (gdbarch
)->call_abi
!= CallAbiCall0Only
)
1929 ra
= (bp_addr
& 0x3fffffff) | 0x40000000;
1930 regcache_raw_read_unsigned (regcache
, gdbarch_ps_regnum (gdbarch
), &val
);
1931 ps
= (unsigned long) val
& ~0x00030000;
1932 regcache_cooked_write_unsigned
1933 (regcache
, gdbarch_tdep (gdbarch
)->a0_base
+ 4, ra
);
1934 regcache_cooked_write_unsigned (regcache
,
1935 gdbarch_ps_regnum (gdbarch
),
1938 /* All the registers have been saved. After executing
1939 dummy call, they all will be restored. So it's safe
1940 to modify WINDOWSTART register to make it look like there
1941 is only one register window corresponding to WINDOWEBASE. */
1943 regcache_raw_read (regcache
, gdbarch_tdep (gdbarch
)->wb_regnum
, buf
);
1944 regcache_cooked_write_unsigned
1945 (regcache
, gdbarch_tdep (gdbarch
)->ws_regnum
,
1946 1 << extract_unsigned_integer (buf
, 4, byte_order
));
1950 /* Simulate CALL0: write RA into A0 register. */
1951 regcache_cooked_write_unsigned
1952 (regcache
, gdbarch_tdep (gdbarch
)->a0_base
, bp_addr
);
1955 /* Set new stack pointer and return it. */
1956 regcache_cooked_write_unsigned (regcache
,
1957 gdbarch_tdep (gdbarch
)->a0_base
+ 1, sp
);
1958 /* Make dummy frame ID unique by adding a constant. */
1959 return sp
+ SP_ALIGNMENT
;
1963 /* Return a breakpoint for the current location of PC. We always use
1964 the density version if we have density instructions (regardless of the
1965 current instruction at PC), and use regular instructions otherwise. */
1967 #define BIG_BREAKPOINT { 0x00, 0x04, 0x00 }
1968 #define LITTLE_BREAKPOINT { 0x00, 0x40, 0x00 }
1969 #define DENSITY_BIG_BREAKPOINT { 0xd2, 0x0f }
1970 #define DENSITY_LITTLE_BREAKPOINT { 0x2d, 0xf0 }
1972 static const unsigned char *
1973 xtensa_breakpoint_from_pc (struct gdbarch
*gdbarch
, CORE_ADDR
*pcptr
,
1976 static unsigned char big_breakpoint
[] = BIG_BREAKPOINT
;
1977 static unsigned char little_breakpoint
[] = LITTLE_BREAKPOINT
;
1978 static unsigned char density_big_breakpoint
[] = DENSITY_BIG_BREAKPOINT
;
1979 static unsigned char density_little_breakpoint
[] = DENSITY_LITTLE_BREAKPOINT
;
1981 DEBUGTRACE ("xtensa_breakpoint_from_pc (pc = 0x%08x)\n", (int) *pcptr
);
1983 if (gdbarch_tdep (gdbarch
)->isa_use_density_instructions
)
1985 if (gdbarch_byte_order (gdbarch
) == BFD_ENDIAN_BIG
)
1987 *lenptr
= sizeof (density_big_breakpoint
);
1988 return density_big_breakpoint
;
1992 *lenptr
= sizeof (density_little_breakpoint
);
1993 return density_little_breakpoint
;
1998 if (gdbarch_byte_order (gdbarch
) == BFD_ENDIAN_BIG
)
2000 *lenptr
= sizeof (big_breakpoint
);
2001 return big_breakpoint
;
2005 *lenptr
= sizeof (little_breakpoint
);
2006 return little_breakpoint
;
2011 /* Call0 ABI support routines. */
2013 /* Return true, if PC points to "ret" or "ret.n". */
2016 call0_ret (CORE_ADDR start_pc
, CORE_ADDR finish_pc
)
2018 #define RETURN_RET goto done
2020 xtensa_insnbuf ins
, slot
;
2021 gdb_byte ibuf
[XTENSA_ISA_BSZ
];
2022 CORE_ADDR ia
, bt
, ba
;
2024 int ilen
, islots
, is
;
2026 const char *opcname
;
2029 isa
= xtensa_default_isa
;
2030 gdb_assert (XTENSA_ISA_BSZ
>= xtensa_isa_maxlength (isa
));
2031 ins
= xtensa_insnbuf_alloc (isa
);
2032 slot
= xtensa_insnbuf_alloc (isa
);
2035 for (ia
= start_pc
, bt
= ia
; ia
< finish_pc
; ia
+= ilen
)
2037 if (ia
+ xtensa_isa_maxlength (isa
) > bt
)
2040 bt
= (ba
+ XTENSA_ISA_BSZ
) < finish_pc
2041 ? ba
+ XTENSA_ISA_BSZ
: finish_pc
;
2042 if (target_read_memory (ba
, ibuf
, bt
- ba
) != 0 )
2046 xtensa_insnbuf_from_chars (isa
, ins
, &ibuf
[ia
-ba
], 0);
2047 ifmt
= xtensa_format_decode (isa
, ins
);
2048 if (ifmt
== XTENSA_UNDEFINED
)
2050 ilen
= xtensa_format_length (isa
, ifmt
);
2051 if (ilen
== XTENSA_UNDEFINED
)
2053 islots
= xtensa_format_num_slots (isa
, ifmt
);
2054 if (islots
== XTENSA_UNDEFINED
)
2057 for (is
= 0; is
< islots
; ++is
)
2059 if (xtensa_format_get_slot (isa
, ifmt
, is
, ins
, slot
))
2062 opc
= xtensa_opcode_decode (isa
, ifmt
, is
, slot
);
2063 if (opc
== XTENSA_UNDEFINED
)
2066 opcname
= xtensa_opcode_name (isa
, opc
);
2068 if ((strcasecmp (opcname
, "ret.n") == 0)
2069 || (strcasecmp (opcname
, "ret") == 0))
2077 xtensa_insnbuf_free(isa
, slot
);
2078 xtensa_insnbuf_free(isa
, ins
);
2082 /* Call0 opcode class. Opcodes are preclassified according to what they
2083 mean for Call0 prologue analysis, and their number of significant operands.
2084 The purpose of this is to simplify prologue analysis by separating
2085 instruction decoding (libisa) from the semantics of prologue analysis. */
2089 c0opc_illegal
, /* Unknown to libisa (invalid) or 'ill' opcode. */
2090 c0opc_uninteresting
, /* Not interesting for Call0 prologue analysis. */
2091 c0opc_flow
, /* Flow control insn. */
2092 c0opc_entry
, /* ENTRY indicates non-Call0 prologue. */
2093 c0opc_break
, /* Debugger software breakpoints. */
2094 c0opc_add
, /* Adding two registers. */
2095 c0opc_addi
, /* Adding a register and an immediate. */
2096 c0opc_and
, /* Bitwise "and"-ing two registers. */
2097 c0opc_sub
, /* Subtracting a register from a register. */
2098 c0opc_mov
, /* Moving a register to a register. */
2099 c0opc_movi
, /* Moving an immediate to a register. */
2100 c0opc_l32r
, /* Loading a literal. */
2101 c0opc_s32i
, /* Storing word at fixed offset from a base register. */
2102 c0opc_rwxsr
, /* RSR, WRS, or XSR instructions. */
2103 c0opc_l32e
, /* L32E instruction. */
2104 c0opc_s32e
, /* S32E instruction. */
2105 c0opc_rfwo
, /* RFWO instruction. */
2106 c0opc_rfwu
, /* RFWU instruction. */
2107 c0opc_NrOf
/* Number of opcode classifications. */
2110 /* Return true, if OPCNAME is RSR, WRS, or XSR instruction. */
2113 rwx_special_register (const char *opcname
)
2115 char ch
= *opcname
++;
2117 if ((ch
!= 'r') && (ch
!= 'w') && (ch
!= 'x'))
2119 if (*opcname
++ != 's')
2121 if (*opcname
++ != 'r')
2123 if (*opcname
++ != '.')
2129 /* Classify an opcode based on what it means for Call0 prologue analysis. */
2131 static xtensa_insn_kind
2132 call0_classify_opcode (xtensa_isa isa
, xtensa_opcode opc
)
2134 const char *opcname
;
2135 xtensa_insn_kind opclass
= c0opc_uninteresting
;
2137 DEBUGTRACE ("call0_classify_opcode (..., opc = %d)\n", opc
);
2139 /* Get opcode name and handle special classifications. */
2141 opcname
= xtensa_opcode_name (isa
, opc
);
2144 || strcasecmp (opcname
, "ill") == 0
2145 || strcasecmp (opcname
, "ill.n") == 0)
2146 opclass
= c0opc_illegal
;
2147 else if (strcasecmp (opcname
, "break") == 0
2148 || strcasecmp (opcname
, "break.n") == 0)
2149 opclass
= c0opc_break
;
2150 else if (strcasecmp (opcname
, "entry") == 0)
2151 opclass
= c0opc_entry
;
2152 else if (strcasecmp (opcname
, "rfwo") == 0)
2153 opclass
= c0opc_rfwo
;
2154 else if (strcasecmp (opcname
, "rfwu") == 0)
2155 opclass
= c0opc_rfwu
;
2156 else if (xtensa_opcode_is_branch (isa
, opc
) > 0
2157 || xtensa_opcode_is_jump (isa
, opc
) > 0
2158 || xtensa_opcode_is_loop (isa
, opc
) > 0
2159 || xtensa_opcode_is_call (isa
, opc
) > 0
2160 || strcasecmp (opcname
, "simcall") == 0
2161 || strcasecmp (opcname
, "syscall") == 0)
2162 opclass
= c0opc_flow
;
2164 /* Also, classify specific opcodes that need to be tracked. */
2165 else if (strcasecmp (opcname
, "add") == 0
2166 || strcasecmp (opcname
, "add.n") == 0)
2167 opclass
= c0opc_add
;
2168 else if (strcasecmp (opcname
, "and") == 0)
2169 opclass
= c0opc_and
;
2170 else if (strcasecmp (opcname
, "addi") == 0
2171 || strcasecmp (opcname
, "addi.n") == 0
2172 || strcasecmp (opcname
, "addmi") == 0)
2173 opclass
= c0opc_addi
;
2174 else if (strcasecmp (opcname
, "sub") == 0)
2175 opclass
= c0opc_sub
;
2176 else if (strcasecmp (opcname
, "mov.n") == 0
2177 || strcasecmp (opcname
, "or") == 0) /* Could be 'mov' asm macro. */
2178 opclass
= c0opc_mov
;
2179 else if (strcasecmp (opcname
, "movi") == 0
2180 || strcasecmp (opcname
, "movi.n") == 0)
2181 opclass
= c0opc_movi
;
2182 else if (strcasecmp (opcname
, "l32r") == 0)
2183 opclass
= c0opc_l32r
;
2184 else if (strcasecmp (opcname
, "s32i") == 0
2185 || strcasecmp (opcname
, "s32i.n") == 0)
2186 opclass
= c0opc_s32i
;
2187 else if (strcasecmp (opcname
, "l32e") == 0)
2188 opclass
= c0opc_l32e
;
2189 else if (strcasecmp (opcname
, "s32e") == 0)
2190 opclass
= c0opc_s32e
;
2191 else if (rwx_special_register (opcname
))
2192 opclass
= c0opc_rwxsr
;
2197 /* Tracks register movement/mutation for a given operation, which may
2198 be within a bundle. Updates the destination register tracking info
2199 accordingly. The pc is needed only for pc-relative load instructions
2200 (eg. l32r). The SP register number is needed to identify stores to
2201 the stack frame. Returns 0, if analysis was succesfull, non-zero
2205 call0_track_op (struct gdbarch
*gdbarch
, xtensa_c0reg_t dst
[], xtensa_c0reg_t src
[],
2206 xtensa_insn_kind opclass
, int nods
, unsigned odv
[],
2207 CORE_ADDR pc
, int spreg
, xtensa_frame_cache_t
*cache
)
2209 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
2210 unsigned litbase
, litaddr
, litval
;
2215 /* 3 operands: dst, src, imm. */
2216 gdb_assert (nods
== 3);
2217 dst
[odv
[0]].fr_reg
= src
[odv
[1]].fr_reg
;
2218 dst
[odv
[0]].fr_ofs
= src
[odv
[1]].fr_ofs
+ odv
[2];
2221 /* 3 operands: dst, src1, src2. */
2222 gdb_assert (nods
== 3);
2223 if (src
[odv
[1]].fr_reg
== C0_CONST
)
2225 dst
[odv
[0]].fr_reg
= src
[odv
[2]].fr_reg
;
2226 dst
[odv
[0]].fr_ofs
= src
[odv
[2]].fr_ofs
+ src
[odv
[1]].fr_ofs
;
2228 else if (src
[odv
[2]].fr_reg
== C0_CONST
)
2230 dst
[odv
[0]].fr_reg
= src
[odv
[1]].fr_reg
;
2231 dst
[odv
[0]].fr_ofs
= src
[odv
[1]].fr_ofs
+ src
[odv
[2]].fr_ofs
;
2233 else dst
[odv
[0]].fr_reg
= C0_INEXP
;
2236 /* 3 operands: dst, src1, src2. */
2237 gdb_assert (nods
== 3);
2238 if (cache
->c0
.c0_fpalign
== 0)
2240 /* Handle dynamic stack alignment. */
2241 if ((src
[odv
[0]].fr_reg
== spreg
) && (src
[odv
[1]].fr_reg
== spreg
))
2243 if (src
[odv
[2]].fr_reg
== C0_CONST
)
2244 cache
->c0
.c0_fpalign
= src
[odv
[2]].fr_ofs
;
2247 else if ((src
[odv
[0]].fr_reg
== spreg
)
2248 && (src
[odv
[2]].fr_reg
== spreg
))
2250 if (src
[odv
[1]].fr_reg
== C0_CONST
)
2251 cache
->c0
.c0_fpalign
= src
[odv
[1]].fr_ofs
;
2254 /* else fall through. */
2256 if (src
[odv
[1]].fr_reg
== C0_CONST
)
2258 dst
[odv
[0]].fr_reg
= src
[odv
[2]].fr_reg
;
2259 dst
[odv
[0]].fr_ofs
= src
[odv
[2]].fr_ofs
& src
[odv
[1]].fr_ofs
;
2261 else if (src
[odv
[2]].fr_reg
== C0_CONST
)
2263 dst
[odv
[0]].fr_reg
= src
[odv
[1]].fr_reg
;
2264 dst
[odv
[0]].fr_ofs
= src
[odv
[1]].fr_ofs
& src
[odv
[2]].fr_ofs
;
2266 else dst
[odv
[0]].fr_reg
= C0_INEXP
;
2269 /* 3 operands: dst, src1, src2. */
2270 gdb_assert (nods
== 3);
2271 if (src
[odv
[2]].fr_reg
== C0_CONST
)
2273 dst
[odv
[0]].fr_reg
= src
[odv
[1]].fr_reg
;
2274 dst
[odv
[0]].fr_ofs
= src
[odv
[1]].fr_ofs
- src
[odv
[2]].fr_ofs
;
2276 else dst
[odv
[0]].fr_reg
= C0_INEXP
;
2279 /* 2 operands: dst, src [, src]. */
2280 gdb_assert (nods
== 2);
2281 /* First, check if it's a special case of saving unaligned SP
2282 to a spare register in case of dynamic stack adjustment.
2283 But, only do it one time. The second time could be initializing
2284 frame pointer. We don't want to overwrite the first one. */
2285 if ((odv
[1] == spreg
) && (cache
->c0
.c0_old_sp
== C0_INEXP
))
2286 cache
->c0
.c0_old_sp
= odv
[0];
2288 dst
[odv
[0]].fr_reg
= src
[odv
[1]].fr_reg
;
2289 dst
[odv
[0]].fr_ofs
= src
[odv
[1]].fr_ofs
;
2292 /* 2 operands: dst, imm. */
2293 gdb_assert (nods
== 2);
2294 dst
[odv
[0]].fr_reg
= C0_CONST
;
2295 dst
[odv
[0]].fr_ofs
= odv
[1];
2298 /* 2 operands: dst, literal offset. */
2299 gdb_assert (nods
== 2);
2300 /* litbase = xtensa_get_litbase (pc); can be also used. */
2301 litbase
= (gdbarch_tdep (gdbarch
)->litbase_regnum
== -1)
2302 ? 0 : xtensa_read_register
2303 (gdbarch_tdep (gdbarch
)->litbase_regnum
);
2304 litaddr
= litbase
& 1
2305 ? (litbase
& ~1) + (signed)odv
[1]
2306 : (pc
+ 3 + (signed)odv
[1]) & ~3;
2307 litval
= read_memory_integer (litaddr
, 4, byte_order
);
2308 dst
[odv
[0]].fr_reg
= C0_CONST
;
2309 dst
[odv
[0]].fr_ofs
= litval
;
2312 /* 3 operands: value, base, offset. */
2313 gdb_assert (nods
== 3 && spreg
>= 0 && spreg
< C0_NREGS
);
2314 /* First, check if it's a spill for saved unaligned SP,
2315 when dynamic stack adjustment was applied to this frame. */
2316 if ((cache
->c0
.c0_fpalign
!= 0) /* Dynamic stack adjustment. */
2317 && (odv
[1] == spreg
) /* SP usage indicates spill. */
2318 && (odv
[0] == cache
->c0
.c0_old_sp
)) /* Old SP register spilled. */
2319 cache
->c0
.c0_sp_ofs
= odv
[2];
2321 if (src
[odv
[1]].fr_reg
== spreg
/* Store to stack frame. */
2322 && (src
[odv
[1]].fr_ofs
& 3) == 0 /* Alignment preserved. */
2323 && src
[odv
[0]].fr_reg
>= 0 /* Value is from a register. */
2324 && src
[odv
[0]].fr_ofs
== 0 /* Value hasn't been modified. */
2325 && src
[src
[odv
[0]].fr_reg
].to_stk
== C0_NOSTK
) /* First time. */
2327 /* ISA encoding guarantees alignment. But, check it anyway. */
2328 gdb_assert ((odv
[2] & 3) == 0);
2329 dst
[src
[odv
[0]].fr_reg
].to_stk
= src
[odv
[1]].fr_ofs
+ odv
[2];
2332 /* If we end up inside Window Overflow / Underflow interrupt handler
2333 report an error because these handlers should have been handled
2334 already in a different way. */
2346 /* Analyze prologue of the function at start address to determine if it uses
2347 the Call0 ABI, and if so track register moves and linear modifications
2348 in the prologue up to the PC or just beyond the prologue, whichever is
2349 first. An 'entry' instruction indicates non-Call0 ABI and the end of the
2350 prologue. The prologue may overlap non-prologue instructions but is
2351 guaranteed to end by the first flow-control instruction (jump, branch,
2352 call or return). Since an optimized function may move information around
2353 and change the stack frame arbitrarily during the prologue, the information
2354 is guaranteed valid only at the point in the function indicated by the PC.
2355 May be used to skip the prologue or identify the ABI, w/o tracking.
2357 Returns: Address of first instruction after prologue, or PC (whichever
2358 is first), or 0, if decoding failed (in libisa).
2360 start Start address of function/prologue.
2361 pc Program counter to stop at. Use 0 to continue to end of prologue.
2362 If 0, avoids infinite run-on in corrupt code memory by bounding
2363 the scan to the end of the function if that can be determined.
2364 nregs Number of general registers to track.
2366 cache Xtensa frame cache.
2368 Note that these may produce useful results even if decoding fails
2369 because they begin with default assumptions that analysis may change. */
2372 call0_analyze_prologue (struct gdbarch
*gdbarch
,
2373 CORE_ADDR start
, CORE_ADDR pc
,
2374 int nregs
, xtensa_frame_cache_t
*cache
)
2376 CORE_ADDR ia
; /* Current insn address in prologue. */
2377 CORE_ADDR ba
= 0; /* Current address at base of insn buffer. */
2378 CORE_ADDR bt
; /* Current address at top+1 of insn buffer. */
2379 gdb_byte ibuf
[XTENSA_ISA_BSZ
];/* Instruction buffer for decoding prologue. */
2380 xtensa_isa isa
; /* libisa ISA handle. */
2381 xtensa_insnbuf ins
, slot
; /* libisa handle to decoded insn, slot. */
2382 xtensa_format ifmt
; /* libisa instruction format. */
2383 int ilen
, islots
, is
; /* Instruction length, nbr slots, current slot. */
2384 xtensa_opcode opc
; /* Opcode in current slot. */
2385 xtensa_insn_kind opclass
; /* Opcode class for Call0 prologue analysis. */
2386 int nods
; /* Opcode number of operands. */
2387 unsigned odv
[C0_MAXOPDS
]; /* Operand values in order provided by libisa. */
2388 xtensa_c0reg_t
*rtmp
; /* Register tracking info snapshot. */
2389 int j
; /* General loop counter. */
2390 int fail
= 0; /* Set non-zero and exit, if decoding fails. */
2391 CORE_ADDR body_pc
; /* The PC for the first non-prologue insn. */
2392 CORE_ADDR end_pc
; /* The PC for the lust function insn. */
2394 struct symtab_and_line prologue_sal
;
2396 DEBUGTRACE ("call0_analyze_prologue (start = 0x%08x, pc = 0x%08x, ...)\n",
2397 (int)start
, (int)pc
);
2399 /* Try to limit the scan to the end of the function if a non-zero pc
2400 arg was not supplied to avoid probing beyond the end of valid memory.
2401 If memory is full of garbage that classifies as c0opc_uninteresting.
2402 If this fails (eg. if no symbols) pc ends up 0 as it was.
2403 Intialize the Call0 frame and register tracking info.
2404 Assume it's Call0 until an 'entry' instruction is encountered.
2405 Assume we may be in the prologue until we hit a flow control instr. */
2411 /* Find out, if we have an information about the prologue from DWARF. */
2412 prologue_sal
= find_pc_line (start
, 0);
2413 if (prologue_sal
.line
!= 0) /* Found debug info. */
2414 body_pc
= prologue_sal
.end
;
2416 /* If we are going to analyze the prologue in general without knowing about
2417 the current PC, make the best assumtion for the end of the prologue. */
2420 find_pc_partial_function (start
, 0, NULL
, &end_pc
);
2421 body_pc
= min (end_pc
, body_pc
);
2424 body_pc
= min (pc
, body_pc
);
2427 rtmp
= (xtensa_c0reg_t
*) alloca(nregs
* sizeof(xtensa_c0reg_t
));
2429 if (!xtensa_default_isa
)
2430 xtensa_default_isa
= xtensa_isa_init (0, 0);
2431 isa
= xtensa_default_isa
;
2432 gdb_assert (XTENSA_ISA_BSZ
>= xtensa_isa_maxlength (isa
));
2433 ins
= xtensa_insnbuf_alloc (isa
);
2434 slot
= xtensa_insnbuf_alloc (isa
);
2436 for (ia
= start
, bt
= ia
; ia
< body_pc
; ia
+= ilen
)
2438 /* (Re)fill instruction buffer from memory if necessary, but do not
2439 read memory beyond PC to be sure we stay within text section
2440 (this protection only works if a non-zero pc is supplied). */
2442 if (ia
+ xtensa_isa_maxlength (isa
) > bt
)
2445 bt
= (ba
+ XTENSA_ISA_BSZ
) < body_pc
? ba
+ XTENSA_ISA_BSZ
: body_pc
;
2446 if (target_read_memory (ba
, ibuf
, bt
- ba
) != 0 )
2447 error (_("Unable to read target memory ..."));
2450 /* Decode format information. */
2452 xtensa_insnbuf_from_chars (isa
, ins
, &ibuf
[ia
-ba
], 0);
2453 ifmt
= xtensa_format_decode (isa
, ins
);
2454 if (ifmt
== XTENSA_UNDEFINED
)
2459 ilen
= xtensa_format_length (isa
, ifmt
);
2460 if (ilen
== XTENSA_UNDEFINED
)
2465 islots
= xtensa_format_num_slots (isa
, ifmt
);
2466 if (islots
== XTENSA_UNDEFINED
)
2472 /* Analyze a bundle or a single instruction, using a snapshot of
2473 the register tracking info as input for the entire bundle so that
2474 register changes do not take effect within this bundle. */
2476 for (j
= 0; j
< nregs
; ++j
)
2477 rtmp
[j
] = cache
->c0
.c0_rt
[j
];
2479 for (is
= 0; is
< islots
; ++is
)
2481 /* Decode a slot and classify the opcode. */
2483 fail
= xtensa_format_get_slot (isa
, ifmt
, is
, ins
, slot
);
2487 opc
= xtensa_opcode_decode (isa
, ifmt
, is
, slot
);
2488 DEBUGVERB ("[call0_analyze_prologue] instr addr = 0x%08x, opc = %d\n",
2490 if (opc
== XTENSA_UNDEFINED
)
2491 opclass
= c0opc_illegal
;
2493 opclass
= call0_classify_opcode (isa
, opc
);
2495 /* Decide whether to track this opcode, ignore it, or bail out. */
2504 case c0opc_uninteresting
:
2507 case c0opc_flow
: /* Flow control instructions stop analysis. */
2508 case c0opc_rwxsr
: /* RSR, WSR, XSR instructions stop analysis. */
2513 ia
+= ilen
; /* Skip over 'entry' insn. */
2520 /* Only expected opcodes should get this far. */
2522 /* Extract and decode the operands. */
2523 nods
= xtensa_opcode_num_operands (isa
, opc
);
2524 if (nods
== XTENSA_UNDEFINED
)
2530 for (j
= 0; j
< nods
&& j
< C0_MAXOPDS
; ++j
)
2532 fail
= xtensa_operand_get_field (isa
, opc
, j
, ifmt
,
2537 fail
= xtensa_operand_decode (isa
, opc
, j
, &odv
[j
]);
2542 /* Check operands to verify use of 'mov' assembler macro. */
2543 if (opclass
== c0opc_mov
&& nods
== 3)
2545 if (odv
[2] == odv
[1])
2548 if ((odv
[0] == 1) && (odv
[1] != 1))
2549 /* OR A1, An, An , where n != 1.
2550 This means we are inside epilogue already. */
2555 opclass
= c0opc_uninteresting
;
2560 /* Track register movement and modification for this operation. */
2561 fail
= call0_track_op (gdbarch
, cache
->c0
.c0_rt
, rtmp
,
2562 opclass
, nods
, odv
, ia
, 1, cache
);
2568 DEBUGVERB ("[call0_analyze_prologue] stopped at instr addr 0x%08x, %s\n",
2569 (unsigned)ia
, fail
? "failed" : "succeeded");
2570 xtensa_insnbuf_free(isa
, slot
);
2571 xtensa_insnbuf_free(isa
, ins
);
2572 return fail
? XTENSA_ISA_BADPC
: ia
;
2575 /* Initialize frame cache for the current frame in CALL0 ABI. */
2578 call0_frame_cache (struct frame_info
*this_frame
,
2579 xtensa_frame_cache_t
*cache
, CORE_ADDR pc
)
2581 struct gdbarch
*gdbarch
= get_frame_arch (this_frame
);
2582 enum bfd_endian byte_order
= gdbarch_byte_order (gdbarch
);
2583 CORE_ADDR start_pc
; /* The beginning of the function. */
2584 CORE_ADDR body_pc
=UINT_MAX
; /* PC, where prologue analysis stopped. */
2585 CORE_ADDR sp
, fp
, ra
;
2586 int fp_regnum
= C0_SP
, c0_hasfp
= 0, c0_frmsz
= 0, prev_sp
= 0, to_stk
;
2588 sp
= get_frame_register_unsigned
2589 (this_frame
, gdbarch_tdep (gdbarch
)->a0_base
+ 1);
2590 fp
= sp
; /* Assume FP == SP until proven otherwise. */
2592 /* Find the beginning of the prologue of the function containing the PC
2593 and analyze it up to the PC or the end of the prologue. */
2595 if (find_pc_partial_function (pc
, NULL
, &start_pc
, NULL
))
2597 body_pc
= call0_analyze_prologue (gdbarch
, start_pc
, pc
, C0_NREGS
, cache
);
2599 if (body_pc
== XTENSA_ISA_BADPC
)
2603 goto finish_frame_analysis
;
2607 /* Get the frame information and FP (if used) at the current PC.
2608 If PC is in the prologue, the prologue analysis is more reliable
2609 than DWARF info. We don't not know for sure, if PC is in the prologue,
2610 but we do know no calls have yet taken place, so we can almost
2611 certainly rely on the prologue analysis. */
2615 /* Prologue analysis was successful up to the PC.
2616 It includes the cases when PC == START_PC. */
2617 c0_hasfp
= cache
->c0
.c0_rt
[C0_FP
].fr_reg
== C0_SP
;
2618 /* c0_hasfp == true means there is a frame pointer because
2619 we analyzed the prologue and found that cache->c0.c0_rt[C0_FP]
2620 was derived from SP. Otherwise, it would be C0_FP. */
2621 fp_regnum
= c0_hasfp
? C0_FP
: C0_SP
;
2622 c0_frmsz
= - cache
->c0
.c0_rt
[fp_regnum
].fr_ofs
;
2623 fp_regnum
+= gdbarch_tdep (gdbarch
)->a0_base
;
2625 else /* No data from the prologue analysis. */
2628 fp_regnum
= gdbarch_tdep (gdbarch
)->a0_base
+ C0_SP
;
2633 if (cache
->c0
.c0_fpalign
)
2635 /* This frame has a special prologue with a dynamic stack adjustment
2636 to force an alignment, which is bigger than standard 16 bytes. */
2638 CORE_ADDR unaligned_sp
;
2640 if (cache
->c0
.c0_old_sp
== C0_INEXP
)
2641 /* This can't be. Prologue code should be consistent.
2642 Unaligned stack pointer should be saved in a spare register. */
2646 goto finish_frame_analysis
;
2649 if (cache
->c0
.c0_sp_ofs
== C0_NOSTK
)
2650 /* Saved unaligned value of SP is kept in a register. */
2651 unaligned_sp
= get_frame_register_unsigned
2652 (this_frame
, gdbarch_tdep (gdbarch
)->a0_base
+ cache
->c0
.c0_old_sp
);
2654 /* Get the value from stack. */
2655 unaligned_sp
= (CORE_ADDR
)
2656 read_memory_integer (fp
+ cache
->c0
.c0_sp_ofs
, 4, byte_order
);
2658 prev_sp
= unaligned_sp
+ c0_frmsz
;
2661 prev_sp
= fp
+ c0_frmsz
;
2663 /* Frame size from debug info or prologue tracking does not account for
2664 alloca() and other dynamic allocations. Adjust frame size by FP - SP. */
2667 fp
= get_frame_register_unsigned (this_frame
, fp_regnum
);
2669 /* Update the stack frame size. */
2670 c0_frmsz
+= fp
- sp
;
2673 /* Get the return address (RA) from the stack if saved,
2674 or try to get it from a register. */
2676 to_stk
= cache
->c0
.c0_rt
[C0_RA
].to_stk
;
2677 if (to_stk
!= C0_NOSTK
)
2679 read_memory_integer (sp
+ c0_frmsz
+ cache
->c0
.c0_rt
[C0_RA
].to_stk
,
2682 else if (cache
->c0
.c0_rt
[C0_RA
].fr_reg
== C0_CONST
2683 && cache
->c0
.c0_rt
[C0_RA
].fr_ofs
== 0)
2685 /* Special case for terminating backtrace at a function that wants to
2686 be seen as the outermost one. Such a function will clear it's RA (A0)
2687 register to 0 in the prologue instead of saving its original value. */
2692 /* RA was copied to another register or (before any function call) may
2693 still be in the original RA register. This is not always reliable:
2694 even in a leaf function, register tracking stops after prologue, and
2695 even in prologue, non-prologue instructions (not tracked) may overwrite
2696 RA or any register it was copied to. If likely in prologue or before
2697 any call, use retracking info and hope for the best (compiler should
2698 have saved RA in stack if not in a leaf function). If not in prologue,
2704 && (i
== C0_RA
|| cache
->c0
.c0_rt
[i
].fr_reg
!= C0_RA
);
2706 if (i
>= C0_NREGS
&& cache
->c0
.c0_rt
[C0_RA
].fr_reg
== C0_RA
)
2710 ra
= get_frame_register_unsigned
2712 gdbarch_tdep (gdbarch
)->a0_base
+ cache
->c0
.c0_rt
[i
].fr_reg
);
2717 finish_frame_analysis
:
2718 cache
->pc
= start_pc
;
2720 /* RA == 0 marks the outermost frame. Do not go past it. */
2721 cache
->prev_sp
= (ra
!= 0) ? prev_sp
: 0;
2722 cache
->c0
.fp_regnum
= fp_regnum
;
2723 cache
->c0
.c0_frmsz
= c0_frmsz
;
2724 cache
->c0
.c0_hasfp
= c0_hasfp
;
2725 cache
->c0
.c0_fp
= fp
;
2728 static CORE_ADDR a0_saved
;
2729 static CORE_ADDR a7_saved
;
2730 static CORE_ADDR a11_saved
;
2731 static int a0_was_saved
;
2732 static int a7_was_saved
;
2733 static int a11_was_saved
;
2735 /* Simulate L32E instruction: AT <-- ref (AS + offset). */
2737 execute_l32e (struct gdbarch
*gdbarch
, int at
, int as
, int offset
, CORE_ADDR wb
)
2739 int atreg
= arreg_number (gdbarch
, gdbarch_tdep (gdbarch
)->a0_base
+ at
, wb
);
2740 int asreg
= arreg_number (gdbarch
, gdbarch_tdep (gdbarch
)->a0_base
+ as
, wb
);
2741 CORE_ADDR addr
= xtensa_read_register (asreg
) + offset
;
2742 unsigned int spilled_value
2743 = read_memory_unsigned_integer (addr
, 4, gdbarch_byte_order (gdbarch
));
2745 if ((at
== 0) && !a0_was_saved
)
2747 a0_saved
= xtensa_read_register (atreg
);
2750 else if ((at
== 7) && !a7_was_saved
)
2752 a7_saved
= xtensa_read_register (atreg
);
2755 else if ((at
== 11) && !a11_was_saved
)
2757 a11_saved
= xtensa_read_register (atreg
);
2761 xtensa_write_register (atreg
, spilled_value
);
2764 /* Simulate S32E instruction: AT --> ref (AS + offset). */
2766 execute_s32e (struct gdbarch
*gdbarch
, int at
, int as
, int offset
, CORE_ADDR wb
)
2768 int atreg
= arreg_number (gdbarch
, gdbarch_tdep (gdbarch
)->a0_base
+ at
, wb
);
2769 int asreg
= arreg_number (gdbarch
, gdbarch_tdep (gdbarch
)->a0_base
+ as
, wb
);
2770 CORE_ADDR addr
= xtensa_read_register (asreg
) + offset
;
2771 ULONGEST spilled_value
= xtensa_read_register (atreg
);
2773 write_memory_unsigned_integer (addr
, 4,
2774 gdbarch_byte_order (gdbarch
),
2778 #define XTENSA_MAX_WINDOW_INTERRUPT_HANDLER_LEN 200
2784 xtNoExceptionHandler
2785 } xtensa_exception_handler_t
;
2787 /* Execute instruction stream from current PC until hitting RFWU or RFWO.
2788 Return type of Xtensa Window Interrupt Handler on success. */
2789 static xtensa_exception_handler_t
2790 execute_code (struct gdbarch
*gdbarch
, CORE_ADDR current_pc
, CORE_ADDR wb
)
2793 xtensa_insnbuf ins
, slot
;
2794 gdb_byte ibuf
[XTENSA_ISA_BSZ
];
2795 CORE_ADDR ia
, bt
, ba
;
2797 int ilen
, islots
, is
;
2801 void (*func
) (struct gdbarch
*, int, int, int, CORE_ADDR
);
2803 uint32_t at
, as
, offset
;
2805 /* WindowUnderflow12 = true, when inside _WindowUnderflow12. */
2806 int WindowUnderflow12
= (current_pc
& 0x1ff) >= 0x140;
2808 isa
= xtensa_default_isa
;
2809 gdb_assert (XTENSA_ISA_BSZ
>= xtensa_isa_maxlength (isa
));
2810 ins
= xtensa_insnbuf_alloc (isa
);
2811 slot
= xtensa_insnbuf_alloc (isa
);
2820 while (insn_num
++ < XTENSA_MAX_WINDOW_INTERRUPT_HANDLER_LEN
)
2822 if (ia
+ xtensa_isa_maxlength (isa
) > bt
)
2825 bt
= (ba
+ XTENSA_ISA_BSZ
);
2826 if (target_read_memory (ba
, ibuf
, bt
- ba
) != 0)
2827 return xtNoExceptionHandler
;
2829 xtensa_insnbuf_from_chars (isa
, ins
, &ibuf
[ia
-ba
], 0);
2830 ifmt
= xtensa_format_decode (isa
, ins
);
2831 if (ifmt
== XTENSA_UNDEFINED
)
2832 return xtNoExceptionHandler
;
2833 ilen
= xtensa_format_length (isa
, ifmt
);
2834 if (ilen
== XTENSA_UNDEFINED
)
2835 return xtNoExceptionHandler
;
2836 islots
= xtensa_format_num_slots (isa
, ifmt
);
2837 if (islots
== XTENSA_UNDEFINED
)
2838 return xtNoExceptionHandler
;
2839 for (is
= 0; is
< islots
; ++is
)
2841 if (xtensa_format_get_slot (isa
, ifmt
, is
, ins
, slot
))
2842 return xtNoExceptionHandler
;
2843 opc
= xtensa_opcode_decode (isa
, ifmt
, is
, slot
);
2844 if (opc
== XTENSA_UNDEFINED
)
2845 return xtNoExceptionHandler
;
2846 switch (call0_classify_opcode (isa
, opc
))
2852 /* We expect none of them here. */
2853 return xtNoExceptionHandler
;
2855 func
= execute_l32e
;
2858 func
= execute_s32e
;
2860 case c0opc_rfwo
: /* RFWO. */
2861 /* Here, we return from WindowOverflow handler and,
2862 if we stopped at the very beginning, which means
2863 A0 was saved, we have to restore it now. */
2866 int arreg
= arreg_number (gdbarch
,
2867 gdbarch_tdep (gdbarch
)->a0_base
,
2869 xtensa_write_register (arreg
, a0_saved
);
2871 return xtWindowOverflow
;
2872 case c0opc_rfwu
: /* RFWU. */
2873 /* Here, we return from WindowUnderflow handler.
2874 Let's see if either A7 or A11 has to be restored. */
2875 if (WindowUnderflow12
)
2879 int arreg
= arreg_number (gdbarch
,
2880 gdbarch_tdep (gdbarch
)->a0_base
+ 11,
2882 xtensa_write_register (arreg
, a11_saved
);
2885 else if (a7_was_saved
)
2887 int arreg
= arreg_number (gdbarch
,
2888 gdbarch_tdep (gdbarch
)->a0_base
+ 7,
2890 xtensa_write_register (arreg
, a7_saved
);
2892 return xtWindowUnderflow
;
2893 default: /* Simply skip this insns. */
2897 /* Decode arguments for L32E / S32E and simulate their execution. */
2898 if ( xtensa_opcode_num_operands (isa
, opc
) != 3 )
2899 return xtNoExceptionHandler
;
2900 if (xtensa_operand_get_field (isa
, opc
, 0, ifmt
, is
, slot
, &at
))
2901 return xtNoExceptionHandler
;
2902 if (xtensa_operand_decode (isa
, opc
, 0, &at
))
2903 return xtNoExceptionHandler
;
2904 if (xtensa_operand_get_field (isa
, opc
, 1, ifmt
, is
, slot
, &as
))
2905 return xtNoExceptionHandler
;
2906 if (xtensa_operand_decode (isa
, opc
, 1, &as
))
2907 return xtNoExceptionHandler
;
2908 if (xtensa_operand_get_field (isa
, opc
, 2, ifmt
, is
, slot
, &offset
))
2909 return xtNoExceptionHandler
;
2910 if (xtensa_operand_decode (isa
, opc
, 2, &offset
))
2911 return xtNoExceptionHandler
;
2913 (*func
) (gdbarch
, at
, as
, offset
, wb
);
2918 return xtNoExceptionHandler
;
2921 /* Handle Window Overflow / Underflow exception frames. */
2924 xtensa_window_interrupt_frame_cache (struct frame_info
*this_frame
,
2925 xtensa_frame_cache_t
*cache
,
2928 struct gdbarch
*gdbarch
= get_frame_arch (this_frame
);
2929 CORE_ADDR ps
, wb
, ws
, ra
;
2930 int epc1_regnum
, i
, regnum
;
2931 xtensa_exception_handler_t eh_type
;
2933 /* Read PS, WB, and WS from the hardware. Note that PS register
2934 must be present, if Windowed ABI is supported. */
2935 ps
= xtensa_read_register (gdbarch_ps_regnum (gdbarch
));
2936 wb
= xtensa_read_register (gdbarch_tdep (gdbarch
)->wb_regnum
);
2937 ws
= xtensa_read_register (gdbarch_tdep (gdbarch
)->ws_regnum
);
2939 /* Execute all the remaining instructions from Window Interrupt Handler
2940 by simulating them on the remote protocol level. On return, set the
2941 type of Xtensa Window Interrupt Handler, or report an error. */
2942 eh_type
= execute_code (gdbarch
, pc
, wb
);
2943 if (eh_type
== xtNoExceptionHandler
)
2945 Unable to decode Xtensa Window Interrupt Handler's code."));
2947 cache
->ps
= ps
^ PS_EXC
; /* Clear the exception bit in PS. */
2948 cache
->call0
= 0; /* It's Windowed ABI. */
2950 /* All registers for the cached frame will be alive. */
2951 for (i
= 0; i
< XTENSA_NUM_SAVED_AREGS
; i
++)
2952 cache
->wd
.aregs
[i
] = -1;
2954 if (eh_type
== xtWindowOverflow
)
2955 cache
->wd
.ws
= ws
^ (1 << wb
);
2956 else /* eh_type == xtWindowUnderflow. */
2957 cache
->wd
.ws
= ws
| (1 << wb
);
2959 cache
->wd
.wb
= (ps
& 0xf00) >> 8; /* Set WB to OWB. */
2960 regnum
= arreg_number (gdbarch
, gdbarch_tdep (gdbarch
)->a0_base
,
2962 ra
= xtensa_read_register (regnum
);
2963 cache
->wd
.callsize
= WINSIZE (ra
);
2964 cache
->prev_sp
= xtensa_read_register (regnum
+ 1);
2965 /* Set regnum to a frame pointer of the frame being cached. */
2966 regnum
= xtensa_scan_prologue (gdbarch
, pc
);
2967 regnum
= arreg_number (gdbarch
,
2968 gdbarch_tdep (gdbarch
)->a0_base
+ regnum
,
2970 cache
->base
= get_frame_register_unsigned (this_frame
, regnum
);
2972 /* Read PC of interrupted function from EPC1 register. */
2973 epc1_regnum
= xtensa_find_register_by_name (gdbarch
,"epc1");
2974 if (epc1_regnum
< 0)
2975 error(_("Unable to read Xtensa register EPC1"));
2976 cache
->ra
= xtensa_read_register (epc1_regnum
);
2977 cache
->pc
= get_frame_func (this_frame
);
2981 /* Skip function prologue.
2983 Return the pc of the first instruction after prologue. GDB calls this to
2984 find the address of the first line of the function or (if there is no line
2985 number information) to skip the prologue for planting breakpoints on
2986 function entries. Use debug info (if present) or prologue analysis to skip
2987 the prologue to achieve reliable debugging behavior. For windowed ABI,
2988 only the 'entry' instruction is skipped. It is not strictly necessary to
2989 skip the prologue (Call0) or 'entry' (Windowed) because xt-gdb knows how to
2990 backtrace at any point in the prologue, however certain potential hazards
2991 are avoided and a more "normal" debugging experience is ensured by
2992 skipping the prologue (can be disabled by defining DONT_SKIP_PROLOG).
2993 For example, if we don't skip the prologue:
2994 - Some args may not yet have been saved to the stack where the debug
2995 info expects to find them (true anyway when only 'entry' is skipped);
2996 - Software breakpoints ('break' instrs) may not have been unplanted
2997 when the prologue analysis is done on initializing the frame cache,
2998 and breaks in the prologue will throw off the analysis.
3000 If we have debug info ( line-number info, in particular ) we simply skip
3001 the code associated with the first function line effectively skipping
3002 the prologue code. It works even in cases like
3005 { int local_var = 1;
3009 because, for this source code, both Xtensa compilers will generate two
3010 separate entries ( with the same line number ) in dwarf line-number
3011 section to make sure there is a boundary between the prologue code and
3012 the rest of the function.
3014 If there is no debug info, we need to analyze the code. */
3016 /* #define DONT_SKIP_PROLOGUE */
3019 xtensa_skip_prologue (struct gdbarch
*gdbarch
, CORE_ADDR start_pc
)
3021 struct symtab_and_line prologue_sal
;
3024 DEBUGTRACE ("xtensa_skip_prologue (start_pc = 0x%08x)\n", (int) start_pc
);
3026 #if DONT_SKIP_PROLOGUE
3030 /* Try to find first body line from debug info. */
3032 prologue_sal
= find_pc_line (start_pc
, 0);
3033 if (prologue_sal
.line
!= 0) /* Found debug info. */
3035 /* In Call0, it is possible to have a function with only one instruction
3036 ('ret') resulting from a one-line optimized function that does nothing.
3037 In that case, prologue_sal.end may actually point to the start of the
3038 next function in the text section, causing a breakpoint to be set at
3039 the wrong place. Check, if the end address is within a different
3040 function, and if so return the start PC. We know we have symbol
3045 if ((gdbarch_tdep (gdbarch
)->call_abi
== CallAbiCall0Only
)
3046 && call0_ret (start_pc
, prologue_sal
.end
))
3049 find_pc_partial_function (prologue_sal
.end
, NULL
, &end_func
, NULL
);
3050 if (end_func
!= start_pc
)
3053 return prologue_sal
.end
;
3056 /* No debug line info. Analyze prologue for Call0 or simply skip ENTRY. */
3057 body_pc
= call0_analyze_prologue (gdbarch
, start_pc
, 0, 0,
3058 xtensa_alloc_frame_cache (0));
3059 return body_pc
!= 0 ? body_pc
: start_pc
;
3062 /* Verify the current configuration. */
3064 xtensa_verify_config (struct gdbarch
*gdbarch
)
3066 struct ui_file
*log
;
3067 struct cleanup
*cleanups
;
3068 struct gdbarch_tdep
*tdep
;
3072 tdep
= gdbarch_tdep (gdbarch
);
3073 log
= mem_fileopen ();
3074 cleanups
= make_cleanup_ui_file_delete (log
);
3076 /* Verify that we got a reasonable number of AREGS. */
3077 if ((tdep
->num_aregs
& -tdep
->num_aregs
) != tdep
->num_aregs
)
3078 fprintf_unfiltered (log
, _("\
3079 \n\tnum_aregs: Number of AR registers (%d) is not a power of two!"),
3082 /* Verify that certain registers exist. */
3084 if (tdep
->pc_regnum
== -1)
3085 fprintf_unfiltered (log
, _("\n\tpc_regnum: No PC register"));
3086 if (tdep
->isa_use_exceptions
&& tdep
->ps_regnum
== -1)
3087 fprintf_unfiltered (log
, _("\n\tps_regnum: No PS register"));
3089 if (tdep
->isa_use_windowed_registers
)
3091 if (tdep
->wb_regnum
== -1)
3092 fprintf_unfiltered (log
, _("\n\twb_regnum: No WB register"));
3093 if (tdep
->ws_regnum
== -1)
3094 fprintf_unfiltered (log
, _("\n\tws_regnum: No WS register"));
3095 if (tdep
->ar_base
== -1)
3096 fprintf_unfiltered (log
, _("\n\tar_base: No AR registers"));
3099 if (tdep
->a0_base
== -1)
3100 fprintf_unfiltered (log
, _("\n\ta0_base: No Ax registers"));
3102 buf
= ui_file_xstrdup (log
, &length
);
3103 make_cleanup (xfree
, buf
);
3105 internal_error (__FILE__
, __LINE__
,
3106 _("the following are invalid: %s"), buf
);
3107 do_cleanups (cleanups
);
3111 /* Derive specific register numbers from the array of registers. */
3114 xtensa_derive_tdep (struct gdbarch_tdep
*tdep
)
3116 xtensa_register_t
* rmap
;
3117 int n
, max_size
= 4;
3120 tdep
->num_nopriv_regs
= 0;
3122 /* Special registers 0..255 (core). */
3123 #define XTENSA_DBREGN_SREG(n) (0x0200+(n))
3125 for (rmap
= tdep
->regmap
, n
= 0; rmap
->target_number
!= -1; n
++, rmap
++)
3127 if (rmap
->target_number
== 0x0020)
3128 tdep
->pc_regnum
= n
;
3129 else if (rmap
->target_number
== 0x0100)
3131 else if (rmap
->target_number
== 0x0000)
3133 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(72))
3134 tdep
->wb_regnum
= n
;
3135 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(73))
3136 tdep
->ws_regnum
= n
;
3137 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(233))
3138 tdep
->debugcause_regnum
= n
;
3139 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(232))
3140 tdep
->exccause_regnum
= n
;
3141 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(238))
3142 tdep
->excvaddr_regnum
= n
;
3143 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(0))
3144 tdep
->lbeg_regnum
= n
;
3145 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(1))
3146 tdep
->lend_regnum
= n
;
3147 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(2))
3148 tdep
->lcount_regnum
= n
;
3149 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(3))
3150 tdep
->sar_regnum
= n
;
3151 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(5))
3152 tdep
->litbase_regnum
= n
;
3153 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(230))
3154 tdep
->ps_regnum
= n
;
3156 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(226))
3157 tdep
->interrupt_regnum
= n
;
3158 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(227))
3159 tdep
->interrupt2_regnum
= n
;
3160 else if (rmap
->target_number
== XTENSA_DBREGN_SREG(224))
3161 tdep
->cpenable_regnum
= n
;
3164 if (rmap
->byte_size
> max_size
)
3165 max_size
= rmap
->byte_size
;
3166 if (rmap
->mask
!= 0 && tdep
->num_regs
== 0)
3168 /* Find out out how to deal with priveleged registers.
3170 if ((rmap->flags & XTENSA_REGISTER_FLAGS_PRIVILEGED) != 0
3171 && tdep->num_nopriv_regs == 0)
3172 tdep->num_nopriv_regs = n;
3174 if ((rmap
->flags
& XTENSA_REGISTER_FLAGS_PRIVILEGED
) != 0
3175 && tdep
->num_regs
== 0)
3179 /* Number of pseudo registers. */
3180 tdep
->num_pseudo_regs
= n
- tdep
->num_regs
;
3182 /* Empirically determined maximum sizes. */
3183 tdep
->max_register_raw_size
= max_size
;
3184 tdep
->max_register_virtual_size
= max_size
;
3187 /* Module "constructor" function. */
3189 extern struct gdbarch_tdep xtensa_tdep
;
3191 static struct gdbarch
*
3192 xtensa_gdbarch_init (struct gdbarch_info info
, struct gdbarch_list
*arches
)
3194 struct gdbarch_tdep
*tdep
;
3195 struct gdbarch
*gdbarch
;
3196 struct xtensa_abi_handler
*abi_handler
;
3198 DEBUGTRACE ("gdbarch_init()\n");
3200 /* We have to set the byte order before we call gdbarch_alloc. */
3201 info
.byte_order
= XCHAL_HAVE_BE
? BFD_ENDIAN_BIG
: BFD_ENDIAN_LITTLE
;
3203 tdep
= &xtensa_tdep
;
3204 gdbarch
= gdbarch_alloc (&info
, tdep
);
3205 xtensa_derive_tdep (tdep
);
3207 /* Verify our configuration. */
3208 xtensa_verify_config (gdbarch
);
3209 xtensa_session_once_reported
= 0;
3211 /* Pseudo-Register read/write. */
3212 set_gdbarch_pseudo_register_read (gdbarch
, xtensa_pseudo_register_read
);
3213 set_gdbarch_pseudo_register_write (gdbarch
, xtensa_pseudo_register_write
);
3215 /* Set target information. */
3216 set_gdbarch_num_regs (gdbarch
, tdep
->num_regs
);
3217 set_gdbarch_num_pseudo_regs (gdbarch
, tdep
->num_pseudo_regs
);
3218 set_gdbarch_sp_regnum (gdbarch
, tdep
->a0_base
+ 1);
3219 set_gdbarch_pc_regnum (gdbarch
, tdep
->pc_regnum
);
3220 set_gdbarch_ps_regnum (gdbarch
, tdep
->ps_regnum
);
3222 /* Renumber registers for known formats (stabs and dwarf2). */
3223 set_gdbarch_stab_reg_to_regnum (gdbarch
, xtensa_reg_to_regnum
);
3224 set_gdbarch_dwarf2_reg_to_regnum (gdbarch
, xtensa_reg_to_regnum
);
3226 /* We provide our own function to get register information. */
3227 set_gdbarch_register_name (gdbarch
, xtensa_register_name
);
3228 set_gdbarch_register_type (gdbarch
, xtensa_register_type
);
3230 /* To call functions from GDB using dummy frame. */
3231 set_gdbarch_push_dummy_call (gdbarch
, xtensa_push_dummy_call
);
3233 set_gdbarch_believe_pcc_promotion (gdbarch
, 1);
3235 set_gdbarch_return_value (gdbarch
, xtensa_return_value
);
3237 /* Advance PC across any prologue instructions to reach "real" code. */
3238 set_gdbarch_skip_prologue (gdbarch
, xtensa_skip_prologue
);
3240 /* Stack grows downward. */
3241 set_gdbarch_inner_than (gdbarch
, core_addr_lessthan
);
3243 /* Set breakpoints. */
3244 set_gdbarch_breakpoint_from_pc (gdbarch
, xtensa_breakpoint_from_pc
);
3246 /* After breakpoint instruction or illegal instruction, pc still
3247 points at break instruction, so don't decrement. */
3248 set_gdbarch_decr_pc_after_break (gdbarch
, 0);
3250 /* We don't skip args. */
3251 set_gdbarch_frame_args_skip (gdbarch
, 0);
3253 set_gdbarch_unwind_pc (gdbarch
, xtensa_unwind_pc
);
3255 set_gdbarch_frame_align (gdbarch
, xtensa_frame_align
);
3257 set_gdbarch_dummy_id (gdbarch
, xtensa_dummy_id
);
3259 /* Frame handling. */
3260 frame_base_set_default (gdbarch
, &xtensa_frame_base
);
3261 frame_unwind_append_unwinder (gdbarch
, &xtensa_unwind
);
3262 dwarf2_append_unwinders (gdbarch
);
3264 set_gdbarch_print_insn (gdbarch
, print_insn_xtensa
);
3266 set_gdbarch_have_nonsteppable_watchpoint (gdbarch
, 1);
3268 xtensa_add_reggroups (gdbarch
);
3269 set_gdbarch_register_reggroup_p (gdbarch
, xtensa_register_reggroup_p
);
3271 set_gdbarch_iterate_over_regset_sections
3272 (gdbarch
, xtensa_iterate_over_regset_sections
);
3274 set_solib_svr4_fetch_link_map_offsets
3275 (gdbarch
, svr4_ilp32_fetch_link_map_offsets
);
3277 /* Hook in the ABI-specific overrides, if they have been registered. */
3278 gdbarch_init_osabi (info
, gdbarch
);
3284 xtensa_dump_tdep (struct gdbarch
*gdbarch
, struct ui_file
*file
)
3286 error (_("xtensa_dump_tdep(): not implemented"));
3289 /* Provide a prototype to silence -Wmissing-prototypes. */
3290 extern initialize_file_ftype _initialize_xtensa_tdep
;
3293 _initialize_xtensa_tdep (void)
3295 struct cmd_list_element
*c
;
3297 gdbarch_register (bfd_arch_xtensa
, xtensa_gdbarch_init
, xtensa_dump_tdep
);
3298 xtensa_init_reggroups ();
3300 add_setshow_zuinteger_cmd ("xtensa",
3302 &xtensa_debug_level
,
3303 _("Set Xtensa debugging."),
3304 _("Show Xtensa debugging."), _("\
3305 When non-zero, Xtensa-specific debugging is enabled. \
3306 Can be 1, 2, 3, or 4 indicating the level of debugging."),
3309 &setdebuglist
, &showdebuglist
);