gold/Makefile.in

   1 # Makefile.in generated by automake 1.9.6 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005  Free Software Foundation, Inc.
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # Process this file with automake to generate Makefile.in
  18
  19
  20 srcdir = @srcdir@
  21 top_srcdir = @top_srcdir@
  22 VPATH = @srcdir@
  23 pkgdatadir = $(datadir)/@PACKAGE@
  24 pkglibdir = $(libdir)/@PACKAGE@
  25 pkgincludedir = $(includedir)/@PACKAGE@
  26 top_builddir = .
  27 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  28 INSTALL = @INSTALL@
  29 install_sh_DATA = $(install_sh) -c -m 644
  30 install_sh_PROGRAM = $(install_sh) -c
  31 install_sh_SCRIPT = $(install_sh) -c
  32 INSTALL_HEADER = $(INSTALL_DATA)
  33 transform = $(program_transform_name)
  34 NORMAL_INSTALL = :
  35 PRE_INSTALL = :
  36 POST_INSTALL = :
  37 NORMAL_UNINSTALL = :
  38 PRE_UNINSTALL = :
  39 POST_UNINSTALL = :
  40 build_triplet = @build@
  41 host_triplet = @host@
  42 target_triplet = @target@
  43 noinst_PROGRAMS = ld-new$(EXEEXT)
  44 @GCC_TRUE@@NATIVE_LINKER_TRUE@check_PROGRAMS = ld1$(EXEEXT) \
  45 @GCC_TRUE@@NATIVE_LINKER_TRUE@  ld2$(EXEEXT)
  46 DIST_COMMON = README $(am__configure_deps) $(srcdir)/../config.guess \
  47         $(srcdir)/../config.sub $(srcdir)/../depcomp \
  48         $(srcdir)/../install-sh $(srcdir)/../missing \
  49         $(srcdir)/../mkinstalldirs $(srcdir)/Makefile.am \
  50         $(srcdir)/Makefile.in $(srcdir)/config.in \
  51         $(top_srcdir)/configure $(top_srcdir)/po/Make-in pread.c \
  52         yyscript.c yyscript.h
  53 subdir = .
  54 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  55 am__aclocal_m4_deps = $(top_srcdir)/../config/depstand.m4 \
  56         $(top_srcdir)/../config/lead-dot.m4 \
  57         $(top_srcdir)/../config/progtest.m4 \
  58         $(top_srcdir)/../config/po.m4 $(top_srcdir)/../config/nls.m4 \
  59         $(top_srcdir)/../config/gettext-sister.m4 \
  60         $(top_srcdir)/../bfd/warning.m4 $(top_srcdir)/configure.ac
  61 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  62         $(ACLOCAL_M4)
  63 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  64  configure.lineno configure.status.lineno
  65 mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
  66 CONFIG_HEADER = config.h
  67 CONFIG_CLEAN_FILES = po/Makefile.in
  68 LIBRARIES = $(noinst_LIBRARIES)
  69 AR = ar
  70 ARFLAGS = cru
  71 libgold_a_AR = $(AR) $(ARFLAGS)
  72 libgold_a_LIBADD =
  73 am__objects_1 = archive.$(OBJEXT) common.$(OBJEXT) defstd.$(OBJEXT) \
  74         dirsearch.$(OBJEXT) dynobj.$(OBJEXT) ehframe.$(OBJEXT) \
  75         fileread.$(OBJEXT) gold.$(OBJEXT) gold-threads.$(OBJEXT) \
  76         layout.$(OBJEXT) merge.$(OBJEXT) object.$(OBJEXT) \
  77         options.$(OBJEXT) output.$(OBJEXT) parameters.$(OBJEXT) \
  78         readsyms.$(OBJEXT) reloc.$(OBJEXT) resolve.$(OBJEXT) \
  79         script.$(OBJEXT) symtab.$(OBJEXT) stringpool.$(OBJEXT) \
  80         target-select.$(OBJEXT) workqueue.$(OBJEXT)
  81 am__objects_2 =
  82 am__objects_3 = yyscript.$(OBJEXT)
  83 am_libgold_a_OBJECTS = $(am__objects_1) $(am__objects_2) \
  84         $(am__objects_3)
  85 libgold_a_OBJECTS = $(am_libgold_a_OBJECTS)
  86 PROGRAMS = $(noinst_PROGRAMS)
  87 am__objects_4 = main.$(OBJEXT)
  88 am_ld_new_OBJECTS = $(am__objects_4)
  89 ld_new_OBJECTS = $(am_ld_new_OBJECTS)
  90 am__DEPENDENCIES_1 =
  91 am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) libgold.a \
  92         $(am__DEPENDENCIES_1)
  93 am__DEPENDENCIES_3 = @LIBOBJS@
  94 am__ld1_SOURCES_DIST = main.cc
  95 @GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld1_OBJECTS = $(am__objects_4)
  96 ld1_OBJECTS = $(am_ld1_OBJECTS)
  97 am__ld2_SOURCES_DIST = main.cc
  98 @GCC_TRUE@@NATIVE_LINKER_TRUE@am_ld2_OBJECTS = $(am__objects_4)
  99 ld2_OBJECTS = $(am_ld2_OBJECTS)
 100 DEFAULT_INCLUDES = -I. -I$(srcdir) -I.
 101 depcomp = $(SHELL) $(top_srcdir)/../depcomp
 102 am__depfiles_maybe = depfiles
 103 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 104         $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
 105 CCLD = $(CC)
 106 LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
 107 CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
 108         $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
 109 CXXLD = $(CXX)
 110 CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
 111         -o $@
 112 YACCCOMPILE = $(YACC) $(YFLAGS) $(AM_YFLAGS)
 113 SOURCES = $(libgold_a_SOURCES) $(ld_new_SOURCES) \
 114         $(EXTRA_ld_new_SOURCES) $(ld1_SOURCES) $(ld2_SOURCES)
 115 DIST_SOURCES = $(libgold_a_SOURCES) $(ld_new_SOURCES) \
 116         $(EXTRA_ld_new_SOURCES) $(am__ld1_SOURCES_DIST) \
 117         $(am__ld2_SOURCES_DIST)
 118 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 119         html-recursive info-recursive install-data-recursive \
 120         install-exec-recursive install-info-recursive \
 121         install-recursive installcheck-recursive installdirs-recursive \
 122         pdf-recursive ps-recursive uninstall-info-recursive \
 123         uninstall-recursive
 124 ETAGS = etags
 125 CTAGS = ctags
 126 DIST_SUBDIRS = $(SUBDIRS)
 127 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 128 distdir = $(PACKAGE)-$(VERSION)
 129 top_distdir = $(distdir)
 130 am__remove_distdir = \
 131   { test ! -d $(distdir) \
 132     || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
 133          && rm -fr $(distdir); }; }
 134 DIST_ARCHIVES = $(distdir).tar.gz
 135 GZIP_ENV = --best
 136 distuninstallcheck_listfiles = find . -type f -print
 137 distcleancheck_listfiles = find . -type f -print
 138 ACLOCAL = @ACLOCAL@
 139 AMDEP_FALSE = @AMDEP_FALSE@
 140 AMDEP_TRUE = @AMDEP_TRUE@
 141 AMTAR = @AMTAR@
 142 AUTOCONF = @AUTOCONF@
 143 AUTOHEADER = @AUTOHEADER@
 144 AUTOMAKE = @AUTOMAKE@
 145 AWK = @AWK@
 146 CATALOGS = @CATALOGS@
 147 CATOBJEXT = @CATOBJEXT@
 148 CC = @CC@
 149 CCDEPMODE = @CCDEPMODE@
 150 CFLAGS = @CFLAGS@
 151 CPPFLAGS = @CPPFLAGS@
 152 CXX = @CXX@
 153 CXXCPP = @CXXCPP@
 154 CXXDEPMODE = @CXXDEPMODE@
 155 CXXFLAGS = @CXXFLAGS@
 156 CYGPATH_W = @CYGPATH_W@
 157 DATADIRNAME = @DATADIRNAME@
 158 DEFS = @DEFS@
 159 DEPDIR = @DEPDIR@
 160 ECHO_C = @ECHO_C@
 161 ECHO_N = @ECHO_N@
 162 ECHO_T = @ECHO_T@
 163 EGREP = @EGREP@
 164 EXEEXT = @EXEEXT@
 165 FN_PTRS_IN_SO_WITHOUT_PIC_FALSE = @FN_PTRS_IN_SO_WITHOUT_PIC_FALSE@
 166 FN_PTRS_IN_SO_WITHOUT_PIC_TRUE = @FN_PTRS_IN_SO_WITHOUT_PIC_TRUE@
 167 GCC_FALSE = @GCC_FALSE@
 168 GCC_TRUE = @GCC_TRUE@
 169 GENCAT = @GENCAT@
 170 GMSGFMT = @GMSGFMT@
 171 INCINTL = @INCINTL@
 172 INSTALL_DATA = @INSTALL_DATA@
 173 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 174 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 175 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 176 INSTOBJEXT = @INSTOBJEXT@
 177 LDFLAGS = @LDFLAGS@
 178 LFS_CXXFLAGS = @LFS_CXXFLAGS@
 179 LIBINTL = @LIBINTL@
 180 LIBINTL_DEP = @LIBINTL_DEP@
 181 LIBOBJS = @LIBOBJS@
 182 LIBS = @LIBS@
 183 LN_S = @LN_S@
 184 LTLIBOBJS = @LTLIBOBJS@
 185 MAINT = @MAINT@
 186 MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
 187 MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
 188 MAKEINFO = @MAKEINFO@
 189 MKINSTALLDIRS = @MKINSTALLDIRS@
 190 MSGFMT = @MSGFMT@
 191 MSGMERGE = @MSGMERGE@
 192 NATIVE_LINKER_FALSE = @NATIVE_LINKER_FALSE@
 193 NATIVE_LINKER_TRUE = @NATIVE_LINKER_TRUE@
 194 NO_WERROR = @NO_WERROR@
 195 OBJEXT = @OBJEXT@
 196 PACKAGE = @PACKAGE@
 197 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 198 PACKAGE_NAME = @PACKAGE_NAME@
 199 PACKAGE_STRING = @PACKAGE_STRING@
 200 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 201 PACKAGE_VERSION = @PACKAGE_VERSION@
 202 PATH_SEPARATOR = @PATH_SEPARATOR@
 203 POSUB = @POSUB@
 204 RANLIB = @RANLIB@
 205 SET_MAKE = @SET_MAKE@
 206 SHELL = @SHELL@
 207 STRIP = @STRIP@
 208 TARGETOBJS = @TARGETOBJS@
 209 USE_NLS = @USE_NLS@
 210 VERSION = @VERSION@
 211 WARN_CFLAGS = @WARN_CFLAGS@
 212 WARN_CXXFLAGS = @WARN_CXXFLAGS@
 213 XGETTEXT = @XGETTEXT@
 214 YACC = @YACC@
 215 ac_ct_CC = @ac_ct_CC@
 216 ac_ct_CXX = @ac_ct_CXX@
 217 ac_ct_RANLIB = @ac_ct_RANLIB@
 218 ac_ct_STRIP = @ac_ct_STRIP@
 219 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 220 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 221 am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
 222 am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
 223 am__include = @am__include@
 224 am__leading_dot = @am__leading_dot@
 225 am__quote = @am__quote@
 226 am__tar = @am__tar@
 227 am__untar = @am__untar@
 228 bindir = @bindir@
 229 build = @build@
 230 build_alias = @build_alias@
 231 build_cpu = @build_cpu@
 232 build_os = @build_os@
 233 build_vendor = @build_vendor@
 234 datadir = @datadir@
 235 exec_prefix = @exec_prefix@
 236 host = @host@
 237 host_alias = @host_alias@
 238 host_cpu = @host_cpu@
 239 host_os = @host_os@
 240 host_vendor = @host_vendor@
 241 includedir = @includedir@
 242 infodir = @infodir@
 243 install_sh = @install_sh@
 244 libdir = @libdir@
 245 libexecdir = @libexecdir@
 246 localstatedir = @localstatedir@
 247 mandir = @mandir@
 248 mkdir_p = @mkdir_p@
 249 oldincludedir = @oldincludedir@
 250 prefix = @prefix@
 251 program_transform_name = @program_transform_name@
 252 sbindir = @sbindir@
 253 sharedstatedir = @sharedstatedir@
 254 sysconfdir = @sysconfdir@
 255 target = @target@
 256 target_alias = @target_alias@
 257 target_cpu = @target_cpu@
 258 target_os = @target_os@
 259 target_vendor = @target_vendor@
 260 AUTOMAKE_OPTIONS =
 261 SUBDIRS = po testsuite
 262 tooldir = $(exec_prefix)/$(target_alias)
 263 ACLOCAL_AMFLAGS = -I ../bfd -I ../config
 264 AM_CXXFLAGS = $(WARN_CXXFLAGS) $(LFS_CXXFLAGS)
 265 INCLUDES = -D_GNU_SOURCE \
 266         -I$(srcdir) -I$(srcdir)/../include -I$(srcdir)/../elfcpp \
 267         -DLOCALEDIR="\"$(datadir)/locale\"" \
 268         @INCINTL@
 269
 270 AM_YFLAGS = -d
 271 noinst_LIBRARIES = libgold.a
 272 CCFILES = \
 273         archive.cc \
 274         common.cc \
 275         defstd.cc \
 276         dirsearch.cc \
 277         dynobj.cc \
 278         ehframe.cc \
 279         fileread.cc \
 280         gold.cc \
 281         gold-threads.cc \
 282         layout.cc \
 283         merge.cc \
 284         object.cc \
 285         options.cc \
 286         output.cc \
 287         parameters.cc \
 288         readsyms.cc \
 289         reloc.cc \
 290         resolve.cc \
 291         script.cc \
 292         symtab.cc \
 293         stringpool.cc \
 294         target-select.cc \
 295         workqueue.cc
 296
 297 HFILES = \
 298         archive.h \
 299         common.h \
 300         defstd.h \
 301         dirsearch.h \
 302         dynobj.h \
 303         ehframe.h \
 304         fileread.h \
 305         gold.h \
 306         gold-threads.h \
 307         layout.h \
 308         merge.h \
 309         object.h \
 310         options.h \
 311         output.h \
 312         parameters.h \
 313         readsyms.h \
 314         reloc.h \
 315         reloc-types.h \
 316         script.h \
 317         script-c.h \
 318         stringpool.h \
 319         symtab.h \
 320         target.h \
 321         target-reloc.h \
 322         target-select.h \
 323         workqueue.h
 324
 325 YFILES = \
 326         yyscript.y
 327
 328 EXTRA_DIST = yyscript.c yyscript.h
 329 TARGETSOURCES = \
 330         i386.cc x86_64.cc
 331
 332 ALL_TARGETOBJS = \
 333         i386.$(OBJEXT) x86_64.$(OBJEXT)
 334
 335 libgold_a_SOURCES = $(CCFILES) $(HFILES) $(YFILES)
 336 sources_var = main.cc
 337 deps_var = $(TARGETOBJS) libgold.a $(LIBINTL_DEP)
 338 ldadd_var = $(TARGETOBJS) libgold.a $(LIBINTL)
 339 ld_new_SOURCES = $(sources_var)
 340 ld_new_DEPENDENCIES = $(deps_var) $(LIBOBJS)
 341 ld_new_LDADD = $(ldadd_var) $(LIBOBJS)
 342 EXTRA_ld_new_SOURCES = $(TARGETSOURCES)
 343 POTFILES = $(CCFILES) $(HFILES) $(TARGETSOURCES)
 344 @GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_SOURCES = $(sources_var)
 345 @GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_DEPENDENCIES = $(deps_var) gcctestdir1/ld
 346 @GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_LDADD = $(ldadd_var)
 347 @GCC_TRUE@@NATIVE_LINKER_TRUE@ld1_LDFLAGS = -Bgcctestdir1/
 348 @GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_SOURCES = $(sources_var)
 349 @GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_DEPENDENCIES = $(deps_var) gcctestdir2/ld
 350 @GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_LDADD = $(ldadd_var)
 351 @GCC_TRUE@@NATIVE_LINKER_TRUE@ld2_LDFLAGS = -Bgcctestdir2/
 352 @GCC_TRUE@@NATIVE_LINKER_TRUE@TESTS = bootstrap-test
 353 all: config.h
 354         $(MAKE) $(AM_MAKEFLAGS) all-recursive
 355
 356 .SUFFIXES:
 357 .SUFFIXES: .c .cc .o .obj .y
 358 am--refresh:
 359         @:
 360 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
 361         @for dep in $?; do \
 362           case '$(am__configure_deps)' in \
 363             *$$dep*) \
 364               echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
 365               cd $(srcdir) && $(AUTOMAKE) --foreign  \
 366                 && exit 0; \
 367               exit 1;; \
 368           esac; \
 369         done; \
 370         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
 371         cd $(top_srcdir) && \
 372           $(AUTOMAKE) --foreign  Makefile
 373 .PRECIOUS: Makefile
 374 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 375         @case '$?' in \
 376           *config.status*) \
 377             echo ' $(SHELL) ./config.status'; \
 378             $(SHELL) ./config.status;; \
 379           *) \
 380             echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
 381             cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
 382         esac;
 383
 384 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 385         $(SHELL) ./config.status --recheck
 386
 387 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 388         cd $(srcdir) && $(AUTOCONF)
 389 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 390         cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
 391
 392 config.h: stamp-h1
 393         @if test ! -f $@; then \
 394           rm -f stamp-h1; \
 395           $(MAKE) stamp-h1; \
 396         else :; fi
 397
 398 stamp-h1: $(srcdir)/config.in $(top_builddir)/config.status
 399         @rm -f stamp-h1
 400         cd $(top_builddir) && $(SHELL) ./config.status config.h
 401 $(srcdir)/config.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 402         cd $(top_srcdir) && $(AUTOHEADER)
 403         rm -f stamp-h1
 404         touch $@
 405
 406 distclean-hdr:
 407         -rm -f config.h stamp-h1
 408 po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in
 409         cd $(top_builddir) && $(SHELL) ./config.status $@
 410
 411 clean-noinstLIBRARIES:
 412         -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
 413 yyscript.h: yyscript.c
 414         @if test ! -f $@; then \
 415           rm -f yyscript.c; \
 416           $(MAKE) yyscript.c; \
 417         else :; fi
 418 libgold.a: $(libgold_a_OBJECTS) $(libgold_a_DEPENDENCIES)
 419         -rm -f libgold.a
 420         $(libgold_a_AR) libgold.a $(libgold_a_OBJECTS) $(libgold_a_LIBADD)
 421         $(RANLIB) libgold.a
 422
 423 clean-checkPROGRAMS:
 424         -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)
 425
 426 clean-noinstPROGRAMS:
 427         -test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)
 428 ld-new$(EXEEXT): $(ld_new_OBJECTS) $(ld_new_DEPENDENCIES)
 429         @rm -f ld-new$(EXEEXT)
 430         $(CXXLINK) $(ld_new_LDFLAGS) $(ld_new_OBJECTS) $(ld_new_LDADD) $(LIBS)
 431 ld1$(EXEEXT): $(ld1_OBJECTS) $(ld1_DEPENDENCIES)
 432         @rm -f ld1$(EXEEXT)
 433         $(CXXLINK) $(ld1_LDFLAGS) $(ld1_OBJECTS) $(ld1_LDADD) $(LIBS)
 434 ld2$(EXEEXT): $(ld2_OBJECTS) $(ld2_DEPENDENCIES)
 435         @rm -f ld2$(EXEEXT)
 436         $(CXXLINK) $(ld2_LDFLAGS) $(ld2_OBJECTS) $(ld2_LDADD) $(LIBS)
 437
 438 mostlyclean-compile:
 439         -rm -f *.$(OBJEXT)
 440
 441 distclean-compile:
 442         -rm -f *.tab.c
 443
 444 @AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/pread.Po@am__quote@
 445 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/archive.Po@am__quote@
 446 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Po@am__quote@
 447 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/defstd.Po@am__quote@
 448 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dirsearch.Po@am__quote@
 449 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dynobj.Po@am__quote@
 450 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ehframe.Po@am__quote@
 451 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fileread.Po@am__quote@
 452 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gold-threads.Po@am__quote@
 453 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gold.Po@am__quote@
 454 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386.Po@am__quote@
 455 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/layout.Po@am__quote@
 456 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
 457 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/merge.Po@am__quote@
 458 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/object.Po@am__quote@
 459 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/options.Po@am__quote@
 460 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/output.Po@am__quote@
 461 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parameters.Po@am__quote@
 462 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readsyms.Po@am__quote@
 463 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/reloc.Po@am__quote@
 464 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/resolve.Po@am__quote@
 465 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/script.Po@am__quote@
 466 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stringpool.Po@am__quote@
 467 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symtab.Po@am__quote@
 468 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/target-select.Po@am__quote@
 469 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/workqueue.Po@am__quote@
 470 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/x86_64.Po@am__quote@
 471 @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/yyscript.Po@am__quote@
 472
 473 .c.o:
 474 @am__fastdepCC_TRUE@    if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
 475 @am__fastdepCC_TRUE@    then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 476 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 477 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 478 @am__fastdepCC_FALSE@   $(COMPILE) -c $<
 479
 480 .c.obj:
 481 @am__fastdepCC_TRUE@    if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
 482 @am__fastdepCC_TRUE@    then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 483 @AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 484 @AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 485 @am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`
 486
 487 .cc.o:
 488 @am__fastdepCXX_TRUE@   if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
 489 @am__fastdepCXX_TRUE@   then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 490 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 491 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 492 @am__fastdepCXX_FALSE@  $(CXXCOMPILE) -c -o $@ $<
 493
 494 .cc.obj:
 495 @am__fastdepCXX_TRUE@   if $(CXXCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
 496 @am__fastdepCXX_TRUE@   then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 497 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 498 @AMDEP_TRUE@@am__fastdepCXX_FALSE@      DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 499 @am__fastdepCXX_FALSE@  $(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 500
 501 .y.c:
 502         $(YACCCOMPILE) $<
 503         if test -f y.tab.h; then \
 504           to=`echo "$*_H" | sed \
 505                 -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/' \
 506                 -e 's/[^ABCDEFGHIJKLMNOPQRSTUVWXYZ]/_/g'`; \
 507           sed -e "/^#/!b" -e "s/Y_TAB_H/$$to/g" -e "s|y\.tab\.h|$*.h|" \
 508             y.tab.h >$*.ht; \
 509           rm -f y.tab.h; \
 510           if cmp -s $*.ht $*.h; then \
 511             rm -f $*.ht ;\
 512           else \
 513             mv $*.ht $*.h; \
 514           fi; \
 515         fi
 516         if test -f y.output; then \
 517           mv y.output $*.output; \
 518         fi
 519         sed '/^#/ s|y\.tab\.c|$@|' y.tab.c >$@t && mv $@t $@
 520         rm -f y.tab.c
 521 uninstall-info-am:
 522
 523 # This directory's subdirectories are mostly independent; you can cd
 524 # into them and run `make' without going through this Makefile.
 525 # To change the values of `make' variables: instead of editing Makefiles,
 526 # (1) if the variable is set in `config.status', edit `config.status'
 527 #     (which will cause the Makefiles to be regenerated when you run `make');
 528 # (2) otherwise, pass the desired values on the `make' command line.
 529 $(RECURSIVE_TARGETS):
 530         @failcom='exit 1'; \
 531         for f in x $$MAKEFLAGS; do \
 532           case $$f in \
 533             *=* | --[!k]*);; \
 534             *k*) failcom='fail=yes';; \
 535           esac; \
 536         done; \
 537         dot_seen=no; \
 538         target=`echo $@ | sed s/-recursive//`; \
 539         list='$(SUBDIRS)'; for subdir in $$list; do \
 540           echo "Making $$target in $$subdir"; \
 541           if test "$$subdir" = "."; then \
 542             dot_seen=yes; \
 543             local_target="$$target-am"; \
 544           else \
 545             local_target="$$target"; \
 546           fi; \
 547           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 548           || eval $$failcom; \
 549         done; \
 550         if test "$$dot_seen" = "no"; then \
 551           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 552         fi; test -z "$$fail"
 553
 554 mostlyclean-recursive clean-recursive distclean-recursive \
 555 maintainer-clean-recursive:
 556         @failcom='exit 1'; \
 557         for f in x $$MAKEFLAGS; do \
 558           case $$f in \
 559             *=* | --[!k]*);; \
 560             *k*) failcom='fail=yes';; \
 561           esac; \
 562         done; \
 563         dot_seen=no; \
 564         case "$@" in \
 565           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 566           *) list='$(SUBDIRS)' ;; \
 567         esac; \
 568         rev=''; for subdir in $$list; do \
 569           if test "$$subdir" = "."; then :; else \
 570             rev="$$subdir $$rev"; \
 571           fi; \
 572         done; \
 573         rev="$$rev ."; \
 574         target=`echo $@ | sed s/-recursive//`; \
 575         for subdir in $$rev; do \
 576           echo "Making $$target in $$subdir"; \
 577           if test "$$subdir" = "."; then \
 578             local_target="$$target-am"; \
 579           else \
 580             local_target="$$target"; \
 581           fi; \
 582           (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 583           || eval $$failcom; \
 584         done && test -z "$$fail"
 585 tags-recursive:
 586         list='$(SUBDIRS)'; for subdir in $$list; do \
 587           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
 588         done
 589 ctags-recursive:
 590         list='$(SUBDIRS)'; for subdir in $$list; do \
 591           test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
 592         done
 593
 594 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
 595         list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
 596         unique=`for i in $$list; do \
 597             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 598           done | \
 599           $(AWK) '    { files[$$0] = 1; } \
 600                END { for (i in files) print i; }'`; \
 601         mkid -fID $$unique
 602 tags: TAGS
 603
 604 TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
 605                 $(TAGS_FILES) $(LISP)
 606         tags=; \
 607         here=`pwd`; \
 608         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 609           include_option=--etags-include; \
 610           empty_fix=.; \
 611         else \
 612           include_option=--include; \
 613           empty_fix=; \
 614         fi; \
 615         list='$(SUBDIRS)'; for subdir in $$list; do \
 616           if test "$$subdir" = .; then :; else \
 617             test ! -f $$subdir/TAGS || \
 618               tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
 619           fi; \
 620         done; \
 621         list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
 622         unique=`for i in $$list; do \
 623             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 624           done | \
 625           $(AWK) '    { files[$$0] = 1; } \
 626                END { for (i in files) print i; }'`; \
 627         if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
 628           test -n "$$unique" || unique=$$empty_fix; \
 629           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 630             $$tags $$unique; \
 631         fi
 632 ctags: CTAGS
 633 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) \
 634                 $(TAGS_FILES) $(LISP)
 635         tags=; \
 636         here=`pwd`; \
 637         list='$(SOURCES) $(HEADERS) config.in $(LISP) $(TAGS_FILES)'; \
 638         unique=`for i in $$list; do \
 639             if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 640           done | \
 641           $(AWK) '    { files[$$0] = 1; } \
 642                END { for (i in files) print i; }'`; \
 643         test -z "$(CTAGS_ARGS)$$tags$$unique" \
 644           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 645              $$tags $$unique
 646
 647 GTAGS:
 648         here=`$(am__cd) $(top_builddir) && pwd` \
 649           && cd $(top_srcdir) \
 650           && gtags -i $(GTAGS_ARGS) $$here
 651
 652 distclean-tags:
 653         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 654
 655 check-TESTS: $(TESTS)
 656         @failed=0; all=0; xfail=0; xpass=0; skip=0; \
 657         srcdir=$(srcdir); export srcdir; \
 658         list='$(TESTS)'; \
 659         if test -n "$$list"; then \
 660           for tst in $$list; do \
 661             if test -f ./$$tst; then dir=./; \
 662             elif test -f $$tst; then dir=; \
 663             else dir="$(srcdir)/"; fi; \
 664             if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \
 665               all=`expr $$all + 1`; \
 666               case " $(XFAIL_TESTS) " in \
 667               *" $$tst "*) \
 668                 xpass=`expr $$xpass + 1`; \
 669                 failed=`expr $$failed + 1`; \
 670                 echo "XPASS: $$tst"; \
 671               ;; \
 672               *) \
 673                 echo "PASS: $$tst"; \
 674               ;; \
 675               esac; \
 676             elif test $$? -ne 77; then \
 677               all=`expr $$all + 1`; \
 678               case " $(XFAIL_TESTS) " in \
 679               *" $$tst "*) \
 680                 xfail=`expr $$xfail + 1`; \
 681                 echo "XFAIL: $$tst"; \
 682               ;; \
 683               *) \
 684                 failed=`expr $$failed + 1`; \
 685                 echo "FAIL: $$tst"; \
 686               ;; \
 687               esac; \
 688             else \
 689               skip=`expr $$skip + 1`; \
 690               echo "SKIP: $$tst"; \
 691             fi; \
 692           done; \
 693           if test "$$failed" -eq 0; then \
 694             if test "$$xfail" -eq 0; then \
 695               banner="All $$all tests passed"; \
 696             else \
 697               banner="All $$all tests behaved as expected ($$xfail expected failures)"; \
 698             fi; \
 699           else \
 700             if test "$$xpass" -eq 0; then \
 701               banner="$$failed of $$all tests failed"; \
 702             else \
 703               banner="$$failed of $$all tests did not behave as expected ($$xpass unexpected passes)"; \
 704             fi; \
 705           fi; \
 706           dashes="$$banner"; \
 707           skipped=""; \
 708           if test "$$skip" -ne 0; then \
 709             skipped="($$skip tests were not run)"; \
 710             test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
 711               dashes="$$skipped"; \
 712           fi; \
 713           report=""; \
 714           if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
 715             report="Please report to $(PACKAGE_BUGREPORT)"; \
 716             test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
 717               dashes="$$report"; \
 718           fi; \
 719           dashes=`echo "$$dashes" | sed s/./=/g`; \
 720           echo "$$dashes"; \
 721           echo "$$banner"; \
 722           test -z "$$skipped" || echo "$$skipped"; \
 723           test -z "$$report" || echo "$$report"; \
 724           echo "$$dashes"; \
 725           test "$$failed" -eq 0; \
 726         else :; fi
 727
 728 distdir: $(DISTFILES)
 729         $(am__remove_distdir)
 730         mkdir $(distdir)
 731         $(mkdir_p) $(distdir)/.. $(distdir)/../bfd $(distdir)/../config $(distdir)/po
 732         @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
 733         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
 734         list='$(DISTFILES)'; for file in $$list; do \
 735           case $$file in \
 736             $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
 737             $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
 738           esac; \
 739           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 740           dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
 741           if test "$$dir" != "$$file" && test "$$dir" != "."; then \
 742             dir="/$$dir"; \
 743             $(mkdir_p) "$(distdir)$$dir"; \
 744           else \
 745             dir=''; \
 746           fi; \
 747           if test -d $$d/$$file; then \
 748             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 749               cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
 750             fi; \
 751             cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
 752           else \
 753             test -f $(distdir)/$$file \
 754             || cp -p $$d/$$file $(distdir)/$$file \
 755             || exit 1; \
 756           fi; \
 757         done
 758         list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 759           if test "$$subdir" = .; then :; else \
 760             test -d "$(distdir)/$$subdir" \
 761             || $(mkdir_p) "$(distdir)/$$subdir" \
 762             || exit 1; \
 763             distdir=`$(am__cd) $(distdir) && pwd`; \
 764             top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
 765             (cd $$subdir && \
 766               $(MAKE) $(AM_MAKEFLAGS) \
 767                 top_distdir="$$top_distdir" \
 768                 distdir="$$distdir/$$subdir" \
 769                 distdir) \
 770               || exit 1; \
 771           fi; \
 772         done
 773         -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
 774           ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
 775           ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
 776           ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
 777         || chmod -R a+r $(distdir)
 778 dist-gzip: distdir
 779         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 780         $(am__remove_distdir)
 781
 782 dist-bzip2: distdir
 783         tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
 784         $(am__remove_distdir)
 785
 786 dist-tarZ: distdir
 787         tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
 788         $(am__remove_distdir)
 789
 790 dist-shar: distdir
 791         shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
 792         $(am__remove_distdir)
 793
 794 dist-zip: distdir
 795         -rm -f $(distdir).zip
 796         zip -rq $(distdir).zip $(distdir)
 797         $(am__remove_distdir)
 798
 799 dist dist-all: distdir
 800         tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
 801         $(am__remove_distdir)
 802
 803 # This target untars the dist file and tries a VPATH configuration.  Then
 804 # it guarantees that the distribution is self-contained by making another
 805 # tarfile.
 806 distcheck: dist
 807         case '$(DIST_ARCHIVES)' in \
 808         *.tar.gz*) \
 809           GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
 810         *.tar.bz2*) \
 811           bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
 812         *.tar.Z*) \
 813           uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 814         *.shar.gz*) \
 815           GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
 816         *.zip*) \
 817           unzip $(distdir).zip ;;\
 818         esac
 819         chmod -R a-w $(distdir); chmod a+w $(distdir)
 820         mkdir $(distdir)/_build
 821         mkdir $(distdir)/_inst
 822         chmod a-w $(distdir)
 823         dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
 824           && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
 825           && cd $(distdir)/_build \
 826           && ../configure --srcdir=.. --prefix="$$dc_install_base" \
 827             $(DISTCHECK_CONFIGURE_FLAGS) \
 828           && $(MAKE) $(AM_MAKEFLAGS) \
 829           && $(MAKE) $(AM_MAKEFLAGS) dvi \
 830           && $(MAKE) $(AM_MAKEFLAGS) check \
 831           && $(MAKE) $(AM_MAKEFLAGS) install \
 832           && $(MAKE) $(AM_MAKEFLAGS) installcheck \
 833           && $(MAKE) $(AM_MAKEFLAGS) uninstall \
 834           && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
 835                 distuninstallcheck \
 836           && chmod -R a-w "$$dc_install_base" \
 837           && ({ \
 838                (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
 839                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
 840                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
 841                && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
 842                     distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
 843               } || { rm -rf "$$dc_destdir"; exit 1; }) \
 844           && rm -rf "$$dc_destdir" \
 845           && $(MAKE) $(AM_MAKEFLAGS) dist \
 846           && rm -rf $(DIST_ARCHIVES) \
 847           && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
 848         $(am__remove_distdir)
 849         @(echo "$(distdir) archives ready for distribution: "; \
 850           list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
 851           sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
 852 distuninstallcheck:
 853         @cd $(distuninstallcheck_dir) \
 854         && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
 855            || { echo "ERROR: files left after uninstall:" ; \
 856                 if test -n "$(DESTDIR)"; then \
 857                   echo "  (check DESTDIR support)"; \
 858                 fi ; \
 859                 $(distuninstallcheck_listfiles) ; \
 860                 exit 1; } >&2
 861 distcleancheck: distclean
 862         @if test '$(srcdir)' = . ; then \
 863           echo "ERROR: distcleancheck can only run from a VPATH build" ; \
 864           exit 1 ; \
 865         fi
 866         @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
 867           || { echo "ERROR: files left in build directory after distclean:" ; \
 868                $(distcleancheck_listfiles) ; \
 869                exit 1; } >&2
 870 check-am: all-am
 871         $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
 872         $(MAKE) $(AM_MAKEFLAGS) check-TESTS
 873 check: check-recursive
 874 all-am: Makefile $(LIBRARIES) $(PROGRAMS) config.h
 875 installdirs: installdirs-recursive
 876 installdirs-am:
 877 install: install-recursive
 878 install-exec: install-exec-recursive
 879 install-data: install-data-recursive
 880 uninstall: uninstall-recursive
 881
 882 install-am: all-am
 883         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 884
 885 installcheck: installcheck-recursive
 886 install-strip:
 887         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 888           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 889           `test -z '$(STRIP)' || \
 890             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 891 mostlyclean-generic:
 892
 893 clean-generic:
 894
 895 distclean-generic:
 896         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 897
 898 maintainer-clean-generic:
 899         @echo "This command is intended for maintainers to use"
 900         @echo "it deletes files that may require special tools to rebuild."
 901         -rm -f yyscript.c
 902         -rm -f yyscript.h
 903 clean: clean-recursive
 904
 905 clean-am: clean-checkPROGRAMS clean-generic clean-noinstLIBRARIES \
 906         clean-noinstPROGRAMS mostlyclean-am
 907
 908 distclean: distclean-recursive
 909         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 910         -rm -rf $(DEPDIR) ./$(DEPDIR)
 911         -rm -f Makefile
 912 distclean-am: clean-am distclean-compile distclean-generic \
 913         distclean-hdr distclean-tags
 914
 915 dvi: dvi-recursive
 916
 917 dvi-am:
 918
 919 html: html-recursive
 920
 921 info: info-recursive
 922
 923 info-am:
 924
 925 install-data-am: install-data-local
 926
 927 install-exec-am: install-exec-local
 928
 929 install-info: install-info-recursive
 930
 931 install-man:
 932
 933 installcheck-am:
 934
 935 maintainer-clean: maintainer-clean-recursive
 936         -rm -f $(am__CONFIG_DISTCLEAN_FILES)
 937         -rm -rf $(top_srcdir)/autom4te.cache
 938         -rm -rf $(DEPDIR) ./$(DEPDIR)
 939         -rm -f Makefile
 940 maintainer-clean-am: distclean-am maintainer-clean-generic
 941
 942 mostlyclean: mostlyclean-recursive
 943
 944 mostlyclean-am: mostlyclean-compile mostlyclean-generic
 945
 946 pdf: pdf-recursive
 947
 948 pdf-am:
 949
 950 ps: ps-recursive
 951
 952 ps-am:
 953
 954 uninstall-am: uninstall-info-am
 955
 956 uninstall-info: uninstall-info-recursive
 957
 958 .PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
 959         check-TESTS check-am clean clean-checkPROGRAMS clean-generic \
 960         clean-noinstLIBRARIES clean-noinstPROGRAMS clean-recursive \
 961         ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
 962         dist-shar dist-tarZ dist-zip distcheck distclean \
 963         distclean-compile distclean-generic distclean-hdr \
 964         distclean-recursive distclean-tags distcleancheck distdir \
 965         distuninstallcheck dvi dvi-am html html-am info info-am \
 966         install install-am install-data install-data-am \
 967         install-data-local install-exec install-exec-am \
 968         install-exec-local install-info install-info-am install-man \
 969         install-strip installcheck installcheck-am installdirs \
 970         installdirs-am maintainer-clean maintainer-clean-generic \
 971         maintainer-clean-recursive mostlyclean mostlyclean-compile \
 972         mostlyclean-generic mostlyclean-recursive pdf pdf-am ps ps-am \
 973         tags tags-recursive uninstall uninstall-am uninstall-info-am
 974
 975
 976 # Use an explicit dependency for the bison generated header file.
 977 script.$(OBJEXT): yyscript.h
 978
 979 # We have to build libgold.a before we run the tests.
 980 check: libgold.a
 981
 982 .PHONY: install-exec-local
 983
 984 install-exec-local: ld-new$(EXEEXT)
 985         $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(tooldir)/bin
 986         n=`echo ld | sed '$(transform)'; \
 987         $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(DESTDIR)$(bindir)/$${n}$(EXEEXT); \
 988         if test "$(bindir)" != "$(tooldir)/bin"; then \
 989           rm -f $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT); \
 990           ln $(DESTDIR)$(bindir)/$${n}$(EXEEXT) $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT) >/dev/null 2>/dev/null \
 991             || $(INSTALL_PROGRAM) ld-new$(EXEEXT) $(DESTDIR)$(tooldir)/bin/ld$(EXEEXT); \
 992         fi
 993
 994 # We want install to imply install-info as per GNU standards, despite
 995 # the cygnus option.
 996 install-data-local: install-info
 997
 998 po/POTFILES.in: @MAINT@ Makefile
 999         for f in $(POTFILES); do echo $$f; done | LC_COLLATE= sort > tmp \
1000           && mv tmp $(srcdir)/po/POTFILES.in
1001
1002 # Bootstrap test support.  We use ld-new to build ld1, then use ld1 to
1003 # build ld2.  ld1 and ld2 should be identical.  ld-new need not be
1004 # identical to ld1, since it was linked with the host linker.
1005
1006 @GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir1/ld: ld-new
1007 @GCC_TRUE@@NATIVE_LINKER_TRUE@  test -d gcctestdir1 || mkdir -p gcctestdir1
1008 @GCC_TRUE@@NATIVE_LINKER_TRUE@  rm -f gcctestdir1/ld
1009 @GCC_TRUE@@NATIVE_LINKER_TRUE@  (cd gcctestdir1 && $(LN_S) ../ld-new ld)
1010
1011 @GCC_TRUE@@NATIVE_LINKER_TRUE@gcctestdir2/ld: ld1
1012 @GCC_TRUE@@NATIVE_LINKER_TRUE@  test -d gcctestdir2 || mkdir -p gcctestdir2
1013 @GCC_TRUE@@NATIVE_LINKER_TRUE@  rm -f gcctestdir2/ld
1014 @GCC_TRUE@@NATIVE_LINKER_TRUE@  (cd gcctestdir2 && $(LN_S) ../ld1 ld)
1015
1016 @GCC_TRUE@@NATIVE_LINKER_TRUE@bootstrap-test: ld2
1017 @GCC_TRUE@@NATIVE_LINKER_TRUE@  rm -f $@
1018 @GCC_TRUE@@NATIVE_LINKER_TRUE@  echo "#!/bin/sh" > $@
1019 @GCC_TRUE@@NATIVE_LINKER_TRUE@  echo "cmp ld1 ld2" > $@
1020 @GCC_TRUE@@NATIVE_LINKER_TRUE@  chmod +x $@
1021 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1022 # Otherwise a system limit (for SysV at least) may be exceeded.
1023 .NOEXPORT: