* gdb.base/del.c: New file.

[deliverable/binutils-gdb.git] / gprof / hist.c

/* hist.c  -  Histogram related operations.

   Copyright 1999, 2000, 2001, 2002, 2004, 2005
   Free Software Foundation, Inc.

   This file is part of GNU Binutils.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 2 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program; if not, write to the Free Software
   Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
   02110-1301, USA.  */
\f
#include "libiberty.h"
#include "gprof.h"
#include "search_list.h"
#include "source.h"
#include "symtab.h"
#include "corefile.h"
#include "gmon_io.h"
#include "gmon_out.h"
#include "hist.h"
#include "sym_ids.h"
#include "utils.h"

#define UNITS_TO_CODE (offset_to_code / sizeof(UNIT))

static void scale_and_align_entries (void);
static void print_header (int);
static void print_line (Sym *, double);
static int cmp_time (const PTR, const PTR);

/* Declarations of automatically generated functions to output blurbs.  */
extern void flat_blurb (FILE * fp);

bfd_vma s_lowpc;                /* Lowest address in .text.  */
bfd_vma s_highpc = 0;           /* Highest address in .text.  */
bfd_vma lowpc, highpc;          /* Same, but expressed in UNITs.  */
unsigned int hist_num_bins = 0; /* Number of histogram samples.  */
int *hist_sample = 0;           /* Histogram samples (shorts in the file!).  */
double hist_scale;
static char hist_dimension[16] = "seconds";
static char hist_dimension_abbrev = 's';

static double accum_time;       /* Accumulated time so far for print_line(). */
static double total_time;       /* Total time for all routines.  */

/* Table of SI prefixes for powers of 10 (used to automatically
   scale some of the values in the flat profile).  */
const struct
  {
    char prefix;
    double scale;
  }
SItab[] =
{
  { 'T', 1e-12 },                               /* tera */
  { 'G', 1e-09 },                               /* giga */
  { 'M', 1e-06 },                               /* mega */
  { 'K', 1e-03 },                               /* kilo */
  { ' ', 1e-00 },
  { 'm', 1e+03 },                               /* milli */
  { 'u', 1e+06 },                               /* micro */
  { 'n', 1e+09 },                               /* nano */
  { 'p', 1e+12 },                               /* pico */
  { 'f', 1e+15 },                               /* femto */
  { 'a', 1e+18 }                                /* ato */
};


/* Read the histogram from file IFP.  FILENAME is the name of IFP and
   is provided for formatting error messages only.  */

void
hist_read_rec (FILE * ifp, const char *filename)
{
  bfd_vma n_lowpc, n_highpc;
  unsigned int i, ncnt, profrate;
  UNIT count;

  if (gmon_io_read_vma (ifp, &n_lowpc)
      || gmon_io_read_vma (ifp, &n_highpc)
      || gmon_io_read_32 (ifp, &ncnt)
      || gmon_io_read_32 (ifp, &profrate)
      || gmon_io_read (ifp, hist_dimension, 15)
      || gmon_io_read (ifp, &hist_dimension_abbrev, 1))
    {
      fprintf (stderr, _("%s: %s: unexpected end of file\n"),
               whoami, filename);

      done (1);
    }

  if (!s_highpc)
    {
      /* This is the first histogram record.  */
      s_lowpc = n_lowpc;
      s_highpc = n_highpc;
      lowpc = (bfd_vma) n_lowpc / sizeof (UNIT);
      highpc = (bfd_vma) n_highpc / sizeof (UNIT);
      hist_num_bins = ncnt;
      hz = profrate;
    }

  DBG (SAMPLEDEBUG,
       printf ("[hist_read_rec] n_lowpc 0x%lx n_highpc 0x%lx ncnt %u\n",
               (unsigned long) n_lowpc, (unsigned long) n_highpc, ncnt);
       printf ("[hist_read_rec] s_lowpc 0x%lx s_highpc 0x%lx nsamples %u\n",
               (unsigned long) s_lowpc, (unsigned long) s_highpc,
               hist_num_bins);
       printf ("[hist_read_rec]   lowpc 0x%lx   highpc 0x%lx\n",
               (unsigned long) lowpc, (unsigned long) highpc));

  if (n_lowpc != s_lowpc || n_highpc != s_highpc
      || ncnt != hist_num_bins || hz != (int) profrate)
    {
      fprintf (stderr, _("%s: `%s' is incompatible with first gmon file\n"),
               whoami, filename);
      done (1);
    }

  if (!hist_sample)
    {
      hist_sample = (int *) xmalloc (hist_num_bins * sizeof (hist_sample[0]));
      memset (hist_sample, 0, hist_num_bins * sizeof (hist_sample[0]));
    }

  for (i = 0; i < hist_num_bins; ++i)
    {
      if (fread (&count[0], sizeof (count), 1, ifp) != 1)
        {
          fprintf (stderr,
                  _("%s: %s: unexpected EOF after reading %u of %u samples\n"),
                   whoami, filename, i, hist_num_bins);
          done (1);
        }
      hist_sample[i] += bfd_get_16 (core_bfd, (bfd_byte *) & count[0]);
      DBG (SAMPLEDEBUG,
           printf ("[hist_read_rec] 0x%lx: %u\n",
                   (unsigned long) (n_lowpc + i * (n_highpc - n_lowpc) / ncnt),
                   hist_sample[i]));
    }
}


/* Write execution histogram to file OFP.  FILENAME is the name
   of OFP and is provided for formatting error-messages only.  */

void
hist_write_hist (FILE * ofp, const char *filename)
{
  UNIT count;
  unsigned int i;

  /* Write header.  */

  if (gmon_io_write_8 (ofp, GMON_TAG_TIME_HIST)
      || gmon_io_write_vma (ofp, s_lowpc)
      || gmon_io_write_vma (ofp, s_highpc)
      || gmon_io_write_32 (ofp, hist_num_bins)
      || gmon_io_write_32 (ofp, hz)
      || gmon_io_write (ofp, hist_dimension, 15)
      || gmon_io_write (ofp, &hist_dimension_abbrev, 1))
    {
      perror (filename);
      done (1);
    }

  for (i = 0; i < hist_num_bins; ++i)
    {
      bfd_put_16 (core_bfd, (bfd_vma) hist_sample[i], (bfd_byte *) &count[0]);

      if (fwrite (&count[0], sizeof (count), 1, ofp) != 1)
        {
          perror (filename);
          done (1);
        }
    }
}


/* Calculate scaled entry point addresses (to save time in
   hist_assign_samples), and, on architectures that have procedure
   entry masks at the start of a function, possibly push the scaled
   entry points over the procedure entry mask, if it turns out that
   the entry point is in one bin and the code for a routine is in the
   next bin.  */

static void
scale_and_align_entries ()
{
  Sym *sym;
  bfd_vma bin_of_entry;
  bfd_vma bin_of_code;

  for (sym = symtab.base; sym < symtab.limit; sym++)
    {
      sym->hist.scaled_addr = sym->addr / sizeof (UNIT);
      bin_of_entry = (sym->hist.scaled_addr - lowpc) / hist_scale;
      bin_of_code = ((sym->hist.scaled_addr + UNITS_TO_CODE - lowpc)
                     / hist_scale);
      if (bin_of_entry < bin_of_code)
        {
          DBG (SAMPLEDEBUG,
               printf ("[scale_and_align_entries] pushing 0x%lx to 0x%lx\n",
                       (unsigned long) sym->hist.scaled_addr,
                       (unsigned long) (sym->hist.scaled_addr
                                        + UNITS_TO_CODE)));
          sym->hist.scaled_addr += UNITS_TO_CODE;
        }
    }
}


/* Assign samples to the symbol to which they belong.

   Histogram bin I covers some address range [BIN_LOWPC,BIN_HIGH_PC)
   which may overlap one more symbol address ranges.  If a symbol
   overlaps with the bin's address range by O percent, then O percent
   of the bin's count is credited to that symbol.

   There are three cases as to where BIN_LOW_PC and BIN_HIGH_PC can be
   with respect to the symbol's address range [SYM_LOW_PC,
   SYM_HIGH_PC) as shown in the following diagram.  OVERLAP computes
   the distance (in UNITs) between the arrows, the fraction of the
   sample that is to be credited to the symbol which starts at
   SYM_LOW_PC.

          sym_low_pc                                      sym_high_pc
               |                                               |
               v                                               v

               +-----------------------------------------------+
               |                                               |
          |  ->|    |<-         ->|         |<-         ->|    |<-  |
          |         |             |         |             |         |
          +---------+             +---------+             +---------+

          ^         ^             ^         ^             ^         ^
          |         |             |         |             |         |
     bin_low_pc bin_high_pc  bin_low_pc bin_high_pc  bin_low_pc bin_high_pc

   For the VAX we assert that samples will never fall in the first two
   bytes of any routine, since that is the entry mask, thus we call
   scale_and_align_entries() to adjust the entry points if the entry
   mask falls in one bin but the code for the routine doesn't start
   until the next bin.  In conjunction with the alignment of routine
   addresses, this should allow us to have only one sample for every
   four bytes of text space and never have any overlap (the two end
   cases, above).  */

void
hist_assign_samples ()
{
  bfd_vma bin_low_pc, bin_high_pc;
  bfd_vma sym_low_pc, sym_high_pc;
  bfd_vma overlap, addr;
  unsigned int bin_count;
  unsigned int i, j;
  double time, credit;

  /* Read samples and assign to symbols.  */
  hist_scale = highpc - lowpc;
  hist_scale /= hist_num_bins;
  scale_and_align_entries ();

  /* Iterate over all sample bins.  */
  for (i = 0, j = 1; i < hist_num_bins; ++i)
    {
      bin_count = hist_sample[i];
      if (! bin_count)
        continue;

      bin_low_pc = lowpc + (bfd_vma) (hist_scale * i);
      bin_high_pc = lowpc + (bfd_vma) (hist_scale * (i + 1));
      time = bin_count;

      DBG (SAMPLEDEBUG,
           printf (
      "[assign_samples] bin_low_pc=0x%lx, bin_high_pc=0x%lx, bin_count=%u\n",
                    (unsigned long) (sizeof (UNIT) * bin_low_pc),
                    (unsigned long) (sizeof (UNIT) * bin_high_pc),
                    bin_count));
      total_time += time;

      /* Credit all symbols that are covered by bin I.  */
      for (j = j - 1; j < symtab.len; ++j)
        {
          sym_low_pc = symtab.base[j].hist.scaled_addr;
          sym_high_pc = symtab.base[j + 1].hist.scaled_addr;

          /* If high end of bin is below entry address,
             go for next bin.  */
          if (bin_high_pc < sym_low_pc)
            break;

          /* If low end of bin is above high end of symbol,
             go for next symbol.  */
          if (bin_low_pc >= sym_high_pc)
            continue;

          overlap =
            MIN (bin_high_pc, sym_high_pc) - MAX (bin_low_pc, sym_low_pc);
          if (overlap > 0)
            {
              DBG (SAMPLEDEBUG,
                   printf (
               "[assign_samples] [0x%lx,0x%lx) %s gets %f ticks %ld overlap\n",
                           (unsigned long) symtab.base[j].addr,
                           (unsigned long) (sizeof (UNIT) * sym_high_pc),
                           symtab.base[j].name, overlap * time / hist_scale,
                           (long) overlap));

              addr = symtab.base[j].addr;
              credit = overlap * time / hist_scale;

              /* Credit symbol if it appears in INCL_FLAT or that
                 table is empty and it does not appear it in
                 EXCL_FLAT.  */
              if (sym_lookup (&syms[INCL_FLAT], addr)
                  || (syms[INCL_FLAT].len == 0
                      && !sym_lookup (&syms[EXCL_FLAT], addr)))
                {
                  symtab.base[j].hist.time += credit;
                }
              else
                {
                  total_time -= credit;
                }
            }
        }
    }

  DBG (SAMPLEDEBUG, printf ("[assign_samples] total_time %f\n",
                            total_time));
}


/* Print header for flag histogram profile.  */

static void
print_header (int prefix)
{
  char unit[64];

  sprintf (unit, _("%c%c/call"), prefix, hist_dimension_abbrev);

  if (bsd_style_output)
    {
      printf (_("\ngranularity: each sample hit covers %ld byte(s)"),
              (long) hist_scale * sizeof (UNIT));
      if (total_time > 0.0)
        {
          printf (_(" for %.2f%% of %.2f %s\n\n"),
                  100.0 / total_time, total_time / hz, hist_dimension);
        }
    }
  else
    {
      printf (_("\nEach sample counts as %g %s.\n"), 1.0 / hz, hist_dimension);
    }

  if (total_time <= 0.0)
    {
      printf (_(" no time accumulated\n\n"));

      /* This doesn't hurt since all the numerators will be zero.  */
      total_time = 1.0;
    }

  printf ("%5.5s %10.10s %8.8s %8.8s %8.8s %8.8s  %-8.8s\n",
          "%  ", _("cumulative"), _("self  "), "", _("self  "), _("total "),
          "");
  printf ("%5.5s %9.9s  %8.8s %8.8s %8.8s %8.8s  %-8.8s\n",
          _("time"), hist_dimension, hist_dimension, _("calls"), unit, unit,
          _("name"));
}


static void
print_line (Sym *sym, double scale)
{
  if (ignore_zeros && sym->ncalls == 0 && sym->hist.time == 0)
    return;

  accum_time += sym->hist.time;

  if (bsd_style_output)
    printf ("%5.1f %10.2f %8.2f",
            total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0,
            accum_time / hz, sym->hist.time / hz);
  else
    printf ("%6.2f %9.2f %8.2f",
            total_time > 0.0 ? 100 * sym->hist.time / total_time : 0.0,
            accum_time / hz, sym->hist.time / hz);

  if (sym->ncalls != 0)
    printf (" %8lu %8.2f %8.2f  ",
            sym->ncalls, scale * sym->hist.time / hz / sym->ncalls,
            scale * (sym->hist.time + sym->cg.child_time) / hz / sym->ncalls);
  else
    printf (" %8.8s %8.8s %8.8s  ", "", "", "");

  if (bsd_style_output)
    print_name (sym);
  else
    print_name_only (sym);

  printf ("\n");
}


/* Compare LP and RP.  The primary comparison key is execution time,
   the secondary is number of invocation, and the tertiary is the
   lexicographic order of the function names.  */

static int
cmp_time (const PTR lp, const PTR rp)
{
  const Sym *left = *(const Sym **) lp;
  const Sym *right = *(const Sym **) rp;
  double time_diff;

  time_diff = right->hist.time - left->hist.time;

  if (time_diff > 0.0)
    return 1;

  if (time_diff < 0.0)
    return -1;

  if (right->ncalls > left->ncalls)
    return 1;

  if (right->ncalls < left->ncalls)
    return -1;

  return strcmp (left->name, right->name);
}


/* Print the flat histogram profile.  */

void
hist_print ()
{
  Sym **time_sorted_syms, *top_dog, *sym;
  unsigned int index;
  unsigned log_scale;
  double top_time, time;
  bfd_vma addr;

  if (first_output)
    first_output = FALSE;
  else
    printf ("\f\n");

  accum_time = 0.0;

  if (bsd_style_output)
    {
      if (print_descriptions)
        {
          printf (_("\n\n\nflat profile:\n"));
          flat_blurb (stdout);
        }
    }
  else
    {
      printf (_("Flat profile:\n"));
    }

  /* Sort the symbol table by time (call-count and name as secondary
     and tertiary keys).  */
  time_sorted_syms = (Sym **) xmalloc (symtab.len * sizeof (Sym *));

  for (index = 0; index < symtab.len; ++index)
    time_sorted_syms[index] = &symtab.base[index];

  qsort (time_sorted_syms, symtab.len, sizeof (Sym *), cmp_time);

  if (bsd_style_output)
    {
      log_scale = 5;            /* Milli-seconds is BSD-default.  */
    }
  else
    {
      /* Search for symbol with highest per-call
         execution time and scale accordingly.  */
      log_scale = 0;
      top_dog = 0;
      top_time = 0.0;

      for (index = 0; index < symtab.len; ++index)
        {
          sym = time_sorted_syms[index];

          if (sym->ncalls != 0)
            {
              time = (sym->hist.time + sym->cg.child_time) / sym->ncalls;

              if (time > top_time)
                {
                  top_dog = sym;
                  top_time = time;
                }
            }
        }

      if (top_dog && top_dog->ncalls != 0 && top_time > 0.0)
        {
          top_time /= hz;

          for (log_scale = 0; log_scale < ARRAY_SIZE (SItab); log_scale ++)
            {
              double scaled_value = SItab[log_scale].scale * top_time;

              if (scaled_value >= 1.0 && scaled_value < 1000.0) 
                break;
            }
        }
    }

  /* For now, the dimension is always seconds.  In the future, we
     may also want to support other (pseudo-)dimensions (such as
     I-cache misses etc.).  */
  print_header (SItab[log_scale].prefix);

  for (index = 0; index < symtab.len; ++index)
    {
      addr = time_sorted_syms[index]->addr;

      /* Print symbol if its in INCL_FLAT table or that table
        is empty and the symbol is not in EXCL_FLAT.  */
      if (sym_lookup (&syms[INCL_FLAT], addr)
          || (syms[INCL_FLAT].len == 0
              && !sym_lookup (&syms[EXCL_FLAT], addr)))
        print_line (time_sorted_syms[index], SItab[log_scale].scale);
    }

  free (time_sorted_syms);

  if (print_descriptions && !bsd_style_output)
    flat_blurb (stdout);
}