2 * include/asm-generic/rtc.h
4 * Author: Tom Rini <trini@mvista.com>
9 * Please read the COPYING file for all license details.
15 #include <linux/mc146818rtc.h>
16 #include <linux/rtc.h>
17 #include <linux/bcd.h>
18 #include <linux/delay.h>
20 #include <linux/acpi.h>
23 #define RTC_PIE 0x40 /* periodic interrupt enable */
24 #define RTC_AIE 0x20 /* alarm interrupt enable */
25 #define RTC_UIE 0x10 /* update-finished interrupt enable */
27 /* some dummy definitions */
28 #define RTC_BATT_BAD 0x100 /* battery bad */
29 #define RTC_SQWE 0x08 /* enable square-wave output */
30 #define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
31 #define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
32 #define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
35 * Returns true if a clock update is in progress
37 static inline unsigned char rtc_is_updating(void)
42 spin_lock_irqsave(&rtc_lock
, flags
);
43 uip
= (CMOS_READ(RTC_FREQ_SELECT
) & RTC_UIP
);
44 spin_unlock_irqrestore(&rtc_lock
, flags
);
48 static inline unsigned int __get_rtc_time(struct rtc_time
*time
)
52 unsigned char century
= 0;
54 #ifdef CONFIG_MACH_DECSTATION
55 unsigned int real_year
;
59 * read RTC once any update in progress is done. The update
60 * can take just over 2ms. We wait 20ms. There is no need to
61 * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
62 * If you need to know *exactly* when a second has started, enable
63 * periodic update complete interrupts, (via ioctl) and then
64 * immediately read /dev/rtc which will block until you get the IRQ.
65 * Once the read clears, read the RTC time (again via ioctl). Easy.
67 if (rtc_is_updating())
71 * Only the values that we read from the RTC are set. We leave
72 * tm_wday, tm_yday and tm_isdst untouched. Even though the
73 * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
74 * by the RTC when initially set to a non-zero value.
76 spin_lock_irqsave(&rtc_lock
, flags
);
77 time
->tm_sec
= CMOS_READ(RTC_SECONDS
);
78 time
->tm_min
= CMOS_READ(RTC_MINUTES
);
79 time
->tm_hour
= CMOS_READ(RTC_HOURS
);
80 time
->tm_mday
= CMOS_READ(RTC_DAY_OF_MONTH
);
81 time
->tm_mon
= CMOS_READ(RTC_MONTH
);
82 time
->tm_year
= CMOS_READ(RTC_YEAR
);
83 #ifdef CONFIG_MACH_DECSTATION
84 real_year
= CMOS_READ(RTC_DEC_YEAR
);
87 if (acpi_gbl_FADT
.header
.revision
>= FADT2_REVISION_ID
&&
88 acpi_gbl_FADT
.century
)
89 century
= CMOS_READ(acpi_gbl_FADT
.century
);
91 ctrl
= CMOS_READ(RTC_CONTROL
);
92 spin_unlock_irqrestore(&rtc_lock
, flags
);
94 if (!(ctrl
& RTC_DM_BINARY
) || RTC_ALWAYS_BCD
)
96 time
->tm_sec
= bcd2bin(time
->tm_sec
);
97 time
->tm_min
= bcd2bin(time
->tm_min
);
98 time
->tm_hour
= bcd2bin(time
->tm_hour
);
99 time
->tm_mday
= bcd2bin(time
->tm_mday
);
100 time
->tm_mon
= bcd2bin(time
->tm_mon
);
101 time
->tm_year
= bcd2bin(time
->tm_year
);
102 century
= bcd2bin(century
);
105 #ifdef CONFIG_MACH_DECSTATION
106 time
->tm_year
+= real_year
- 72;
110 time
->tm_year
+= (century
- 19) * 100;
113 * Account for differences between how the RTC uses the values
114 * and how they are defined in a struct rtc_time;
116 if (time
->tm_year
<= 69)
117 time
->tm_year
+= 100;
125 #define get_rtc_time __get_rtc_time
128 /* Set the current date and time in the real time clock. */
129 static inline int __set_rtc_time(struct rtc_time
*time
)
132 unsigned char mon
, day
, hrs
, min
, sec
;
133 unsigned char save_control
, save_freq_select
;
135 #ifdef CONFIG_MACH_DECSTATION
136 unsigned int real_yrs
, leap_yr
;
138 unsigned char century
= 0;
141 mon
= time
->tm_mon
+ 1; /* tm_mon starts at zero */
147 if (yrs
> 255) /* They are unsigned */
150 spin_lock_irqsave(&rtc_lock
, flags
);
151 #ifdef CONFIG_MACH_DECSTATION
153 leap_yr
= ((!((yrs
+ 1900) % 4) && ((yrs
+ 1900) % 100)) ||
154 !((yrs
+ 1900) % 400));
158 * We want to keep the year set to 73 until March
159 * for non-leap years, so that Feb, 29th is handled
162 if (!leap_yr
&& mon
< 3) {
169 if (acpi_gbl_FADT
.header
.revision
>= FADT2_REVISION_ID
&&
170 acpi_gbl_FADT
.century
) {
171 century
= (yrs
+ 1900) / 100;
176 /* These limits and adjustments are independent of
177 * whether the chip is in binary mode or not.
180 spin_unlock_irqrestore(&rtc_lock
, flags
);
187 if (!(CMOS_READ(RTC_CONTROL
) & RTC_DM_BINARY
)
195 century
= bin2bcd(century
);
198 save_control
= CMOS_READ(RTC_CONTROL
);
199 CMOS_WRITE((save_control
|RTC_SET
), RTC_CONTROL
);
200 save_freq_select
= CMOS_READ(RTC_FREQ_SELECT
);
201 CMOS_WRITE((save_freq_select
|RTC_DIV_RESET2
), RTC_FREQ_SELECT
);
203 #ifdef CONFIG_MACH_DECSTATION
204 CMOS_WRITE(real_yrs
, RTC_DEC_YEAR
);
206 CMOS_WRITE(yrs
, RTC_YEAR
);
207 CMOS_WRITE(mon
, RTC_MONTH
);
208 CMOS_WRITE(day
, RTC_DAY_OF_MONTH
);
209 CMOS_WRITE(hrs
, RTC_HOURS
);
210 CMOS_WRITE(min
, RTC_MINUTES
);
211 CMOS_WRITE(sec
, RTC_SECONDS
);
213 if (acpi_gbl_FADT
.header
.revision
>= FADT2_REVISION_ID
&&
214 acpi_gbl_FADT
.century
)
215 CMOS_WRITE(century
, acpi_gbl_FADT
.century
);
218 CMOS_WRITE(save_control
, RTC_CONTROL
);
219 CMOS_WRITE(save_freq_select
, RTC_FREQ_SELECT
);
221 spin_unlock_irqrestore(&rtc_lock
, flags
);
227 #define set_rtc_time __set_rtc_time
230 static inline unsigned int get_rtc_ss(void)
238 static inline int get_rtc_pll(struct rtc_pll_info
*pll
)
242 static inline int set_rtc_pll(struct rtc_pll_info
*pll
)
247 #endif /* __ASM_RTC_H__ */
This page took 0.055237 seconds and 5 git commands to generate.