2 * Helper macros to support writing architecture specific
5 * A minimal linker scripts has following content:
6 * [This is a sample, architectures may have special requiriements]
16 * INIT_TEXT_SECTION(PAGE_SIZE)
17 * INIT_DATA_SECTION(...)
26 * RO_DATA_SECTION(PAGE_SIZE)
27 * RW_DATA_SECTION(...)
30 * EXCEPTION_TABLE(...)
33 * BSS_SECTION(0, 0, 0)
39 * DISCARDS // must be the last
42 * [__init_begin, __init_end] is the init section that may be freed after init
43 * [_stext, _etext] is the text section
44 * [_sdata, _edata] is the data section
46 * Some of the included output section have their own set of constants.
47 * Examples are: [__initramfs_start, __initramfs_end] for initramfs and
48 * [__nosave_begin, __nosave_end] for the nosave data
56 #define VMLINUX_SYMBOL(sym) sym
58 #define PASTE2(x,y) x##y
59 #define PASTE(x,y) PASTE2(x,y)
60 #define VMLINUX_SYMBOL(sym) PASTE(SYMBOL_PREFIX, sym)
63 /* Align . to a 8 byte boundary equals to maximum function alignment. */
64 #define ALIGN_FUNCTION() . = ALIGN(8)
67 * Align to a 32 byte boundary equal to the
68 * alignment gcc 4.5 uses for a struct
70 #define STRUCT_ALIGNMENT 32
71 #define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT)
73 /* The actual configuration determine if the init/exit sections
74 * are handled as text/data or they can be discarded (which
75 * often happens at runtime)
78 #define DEV_KEEP(sec) *(.dev##sec)
79 #define DEV_DISCARD(sec)
82 #define DEV_DISCARD(sec) *(.dev##sec)
85 #ifdef CONFIG_HOTPLUG_CPU
86 #define CPU_KEEP(sec) *(.cpu##sec)
87 #define CPU_DISCARD(sec)
90 #define CPU_DISCARD(sec) *(.cpu##sec)
93 #if defined(CONFIG_MEMORY_HOTPLUG)
94 #define MEM_KEEP(sec) *(.mem##sec)
95 #define MEM_DISCARD(sec)
98 #define MEM_DISCARD(sec) *(.mem##sec)
101 #ifdef CONFIG_FTRACE_MCOUNT_RECORD
102 #define MCOUNT_REC() . = ALIGN(8); \
103 VMLINUX_SYMBOL(__start_mcount_loc) = .; \
105 VMLINUX_SYMBOL(__stop_mcount_loc) = .;
110 #ifdef CONFIG_TRACE_BRANCH_PROFILING
111 #define LIKELY_PROFILE() VMLINUX_SYMBOL(__start_annotated_branch_profile) = .; \
112 *(_ftrace_annotated_branch) \
113 VMLINUX_SYMBOL(__stop_annotated_branch_profile) = .;
115 #define LIKELY_PROFILE()
118 #ifdef CONFIG_PROFILE_ALL_BRANCHES
119 #define BRANCH_PROFILE() VMLINUX_SYMBOL(__start_branch_profile) = .; \
121 VMLINUX_SYMBOL(__stop_branch_profile) = .;
123 #define BRANCH_PROFILE()
126 #ifdef CONFIG_EVENT_TRACING
127 #define FTRACE_EVENTS() VMLINUX_SYMBOL(__start_ftrace_events) = .; \
129 VMLINUX_SYMBOL(__stop_ftrace_events) = .;
131 #define FTRACE_EVENTS()
134 #ifdef CONFIG_TRACING
135 #define TRACE_PRINTKS() VMLINUX_SYMBOL(__start___trace_bprintk_fmt) = .; \
136 *(__trace_printk_fmt) /* Trace_printk fmt' pointer */ \
137 VMLINUX_SYMBOL(__stop___trace_bprintk_fmt) = .;
139 #define TRACE_PRINTKS()
142 #ifdef CONFIG_FTRACE_SYSCALLS
143 #define TRACE_SYSCALLS() VMLINUX_SYMBOL(__start_syscalls_metadata) = .; \
144 *(__syscalls_metadata) \
145 VMLINUX_SYMBOL(__stop_syscalls_metadata) = .;
147 #define TRACE_SYSCALLS()
151 #define KERNEL_DTB() \
153 VMLINUX_SYMBOL(__dtb_start) = .; \
154 *(.dtb.init.rodata) \
155 VMLINUX_SYMBOL(__dtb_end) = .;
161 *(.data..shared_aligned) /* percpu related */ \
162 DEV_KEEP(init.data) \
163 DEV_KEEP(exit.data) \
164 CPU_KEEP(init.data) \
165 CPU_KEEP(exit.data) \
166 MEM_KEEP(init.data) \
167 MEM_KEEP(exit.data) \
169 VMLINUX_SYMBOL(__start___tracepoints) = .; \
171 VMLINUX_SYMBOL(__stop___tracepoints) = .; \
172 /* implement dynamic printk debug */ \
174 VMLINUX_SYMBOL(__start___verbose) = .; \
176 VMLINUX_SYMBOL(__stop___verbose) = .; \
188 * Data section helpers
190 #define NOSAVE_DATA \
191 . = ALIGN(PAGE_SIZE); \
192 VMLINUX_SYMBOL(__nosave_begin) = .; \
194 . = ALIGN(PAGE_SIZE); \
195 VMLINUX_SYMBOL(__nosave_end) = .;
197 #define PAGE_ALIGNED_DATA(page_align) \
198 . = ALIGN(page_align); \
199 *(.data..page_aligned)
201 #define READ_MOSTLY_DATA(align) \
203 *(.data..read_mostly) \
206 #define CACHELINE_ALIGNED_DATA(align) \
208 *(.data..cacheline_aligned)
210 #define INIT_TASK_DATA(align) \
217 #define RO_DATA_SECTION(align) \
218 . = ALIGN((align)); \
219 .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
220 VMLINUX_SYMBOL(__start_rodata) = .; \
221 *(.rodata) *(.rodata.*) \
222 *(__vermagic) /* Kernel version magic */ \
223 *(__markers_strings) /* Markers: strings */ \
224 *(__tracepoints_strings)/* Tracepoints: strings */ \
227 .rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \
236 .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \
237 VMLINUX_SYMBOL(__start_pci_fixups_early) = .; \
238 *(.pci_fixup_early) \
239 VMLINUX_SYMBOL(__end_pci_fixups_early) = .; \
240 VMLINUX_SYMBOL(__start_pci_fixups_header) = .; \
241 *(.pci_fixup_header) \
242 VMLINUX_SYMBOL(__end_pci_fixups_header) = .; \
243 VMLINUX_SYMBOL(__start_pci_fixups_final) = .; \
244 *(.pci_fixup_final) \
245 VMLINUX_SYMBOL(__end_pci_fixups_final) = .; \
246 VMLINUX_SYMBOL(__start_pci_fixups_enable) = .; \
247 *(.pci_fixup_enable) \
248 VMLINUX_SYMBOL(__end_pci_fixups_enable) = .; \
249 VMLINUX_SYMBOL(__start_pci_fixups_resume) = .; \
250 *(.pci_fixup_resume) \
251 VMLINUX_SYMBOL(__end_pci_fixups_resume) = .; \
252 VMLINUX_SYMBOL(__start_pci_fixups_resume_early) = .; \
253 *(.pci_fixup_resume_early) \
254 VMLINUX_SYMBOL(__end_pci_fixups_resume_early) = .; \
255 VMLINUX_SYMBOL(__start_pci_fixups_suspend) = .; \
256 *(.pci_fixup_suspend) \
257 VMLINUX_SYMBOL(__end_pci_fixups_suspend) = .; \
260 /* Built-in firmware blobs */ \
261 .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \
262 VMLINUX_SYMBOL(__start_builtin_fw) = .; \
264 VMLINUX_SYMBOL(__end_builtin_fw) = .; \
267 /* RapidIO route ops */ \
268 .rio_ops : AT(ADDR(.rio_ops) - LOAD_OFFSET) { \
269 VMLINUX_SYMBOL(__start_rio_switch_ops) = .; \
271 VMLINUX_SYMBOL(__end_rio_switch_ops) = .; \
276 /* Kernel symbol table: Normal symbols */ \
277 __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \
278 VMLINUX_SYMBOL(__start___ksymtab) = .; \
280 VMLINUX_SYMBOL(__stop___ksymtab) = .; \
283 /* Kernel symbol table: GPL-only symbols */ \
284 __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \
285 VMLINUX_SYMBOL(__start___ksymtab_gpl) = .; \
287 VMLINUX_SYMBOL(__stop___ksymtab_gpl) = .; \
290 /* Kernel symbol table: Normal unused symbols */ \
291 __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \
292 VMLINUX_SYMBOL(__start___ksymtab_unused) = .; \
293 *(__ksymtab_unused) \
294 VMLINUX_SYMBOL(__stop___ksymtab_unused) = .; \
297 /* Kernel symbol table: GPL-only unused symbols */ \
298 __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \
299 VMLINUX_SYMBOL(__start___ksymtab_unused_gpl) = .; \
300 *(__ksymtab_unused_gpl) \
301 VMLINUX_SYMBOL(__stop___ksymtab_unused_gpl) = .; \
304 /* Kernel symbol table: GPL-future-only symbols */ \
305 __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \
306 VMLINUX_SYMBOL(__start___ksymtab_gpl_future) = .; \
307 *(__ksymtab_gpl_future) \
308 VMLINUX_SYMBOL(__stop___ksymtab_gpl_future) = .; \
311 /* Kernel symbol table: Normal symbols */ \
312 __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \
313 VMLINUX_SYMBOL(__start___kcrctab) = .; \
315 VMLINUX_SYMBOL(__stop___kcrctab) = .; \
318 /* Kernel symbol table: GPL-only symbols */ \
319 __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \
320 VMLINUX_SYMBOL(__start___kcrctab_gpl) = .; \
322 VMLINUX_SYMBOL(__stop___kcrctab_gpl) = .; \
325 /* Kernel symbol table: Normal unused symbols */ \
326 __kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \
327 VMLINUX_SYMBOL(__start___kcrctab_unused) = .; \
328 *(__kcrctab_unused) \
329 VMLINUX_SYMBOL(__stop___kcrctab_unused) = .; \
332 /* Kernel symbol table: GPL-only unused symbols */ \
333 __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \
334 VMLINUX_SYMBOL(__start___kcrctab_unused_gpl) = .; \
335 *(__kcrctab_unused_gpl) \
336 VMLINUX_SYMBOL(__stop___kcrctab_unused_gpl) = .; \
339 /* Kernel symbol table: GPL-future-only symbols */ \
340 __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \
341 VMLINUX_SYMBOL(__start___kcrctab_gpl_future) = .; \
342 *(__kcrctab_gpl_future) \
343 VMLINUX_SYMBOL(__stop___kcrctab_gpl_future) = .; \
346 /* Kernel symbol table: strings */ \
347 __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \
348 *(__ksymtab_strings) \
351 /* __*init sections */ \
352 __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \
354 DEV_KEEP(init.rodata) \
355 DEV_KEEP(exit.rodata) \
356 CPU_KEEP(init.rodata) \
357 CPU_KEEP(exit.rodata) \
358 MEM_KEEP(init.rodata) \
359 MEM_KEEP(exit.rodata) \
362 /* Built-in module parameters. */ \
363 __param : AT(ADDR(__param) - LOAD_OFFSET) { \
364 VMLINUX_SYMBOL(__start___param) = .; \
366 VMLINUX_SYMBOL(__stop___param) = .; \
367 . = ALIGN((align)); \
368 VMLINUX_SYMBOL(__end_rodata) = .; \
372 /* RODATA & RO_DATA provided for backward compatibility.
373 * All archs are supposed to use RO_DATA() */
374 #define RODATA RO_DATA_SECTION(4096)
375 #define RO_DATA(align) RO_DATA_SECTION(align)
377 #define SECURITY_INIT \
378 .security_initcall.init : AT(ADDR(.security_initcall.init) - LOAD_OFFSET) { \
379 VMLINUX_SYMBOL(__security_initcall_start) = .; \
380 *(.security_initcall.init) \
381 VMLINUX_SYMBOL(__security_initcall_end) = .; \
384 /* .text section. Map to function alignment to avoid address changes
385 * during second ld run in second ld pass when generating System.map */
391 DEV_KEEP(init.text) \
392 DEV_KEEP(exit.text) \
393 CPU_KEEP(init.text) \
394 CPU_KEEP(exit.text) \
395 MEM_KEEP(init.text) \
396 MEM_KEEP(exit.text) \
400 /* sched.text is aling to function alignment to secure we have same
401 * address even at second ld pass when generating System.map */
404 VMLINUX_SYMBOL(__sched_text_start) = .; \
406 VMLINUX_SYMBOL(__sched_text_end) = .;
408 /* spinlock.text is aling to function alignment to secure we have same
409 * address even at second ld pass when generating System.map */
412 VMLINUX_SYMBOL(__lock_text_start) = .; \
414 VMLINUX_SYMBOL(__lock_text_end) = .;
416 #define KPROBES_TEXT \
418 VMLINUX_SYMBOL(__kprobes_text_start) = .; \
420 VMLINUX_SYMBOL(__kprobes_text_end) = .;
422 #ifdef CONFIG_FUNCTION_GRAPH_TRACER
423 #define IRQENTRY_TEXT \
425 VMLINUX_SYMBOL(__irqentry_text_start) = .; \
427 VMLINUX_SYMBOL(__irqentry_text_end) = .;
429 #define IRQENTRY_TEXT
432 /* Section used for early init (in .S files) */
433 #define HEAD_TEXT *(.head.text)
435 #define HEAD_TEXT_SECTION \
436 .head.text : AT(ADDR(.head.text) - LOAD_OFFSET) { \
443 #define EXCEPTION_TABLE(align) \
445 __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) { \
446 VMLINUX_SYMBOL(__start___ex_table) = .; \
448 VMLINUX_SYMBOL(__stop___ex_table) = .; \
454 #define INIT_TASK_DATA_SECTION(align) \
456 .data..init_task : AT(ADDR(.data..init_task) - LOAD_OFFSET) { \
457 INIT_TASK_DATA(align) \
460 #ifdef CONFIG_CONSTRUCTORS
461 #define KERNEL_CTORS() . = ALIGN(8); \
462 VMLINUX_SYMBOL(__ctors_start) = .; \
464 VMLINUX_SYMBOL(__ctors_end) = .;
466 #define KERNEL_CTORS()
469 /* init and exit section handling */
472 DEV_DISCARD(init.data) \
473 CPU_DISCARD(init.data) \
474 MEM_DISCARD(init.data) \
478 DEV_DISCARD(init.rodata) \
479 CPU_DISCARD(init.rodata) \
480 MEM_DISCARD(init.rodata) \
485 DEV_DISCARD(init.text) \
486 CPU_DISCARD(init.text) \
487 MEM_DISCARD(init.text)
491 DEV_DISCARD(exit.data) \
492 DEV_DISCARD(exit.rodata) \
493 CPU_DISCARD(exit.data) \
494 CPU_DISCARD(exit.rodata) \
495 MEM_DISCARD(exit.data) \
496 MEM_DISCARD(exit.rodata)
500 DEV_DISCARD(exit.text) \
501 CPU_DISCARD(exit.text) \
502 MEM_DISCARD(exit.text)
508 * bss (Block Started by Symbol) - uninitialized data
509 * zeroed during startup
511 #define SBSS(sbss_align) \
512 . = ALIGN(sbss_align); \
513 .sbss : AT(ADDR(.sbss) - LOAD_OFFSET) { \
518 #define BSS(bss_align) \
519 . = ALIGN(bss_align); \
520 .bss : AT(ADDR(.bss) - LOAD_OFFSET) { \
521 *(.bss..page_aligned) \
528 * DWARF debug sections.
529 * Symbols in the DWARF debugging sections are relative to
530 * the beginning of the section so we begin them at 0.
532 #define DWARF_DEBUG \
534 .debug 0 : { *(.debug) } \
535 .line 0 : { *(.line) } \
536 /* GNU DWARF 1 extensions */ \
537 .debug_srcinfo 0 : { *(.debug_srcinfo) } \
538 .debug_sfnames 0 : { *(.debug_sfnames) } \
539 /* DWARF 1.1 and DWARF 2 */ \
540 .debug_aranges 0 : { *(.debug_aranges) } \
541 .debug_pubnames 0 : { *(.debug_pubnames) } \
543 .debug_info 0 : { *(.debug_info \
544 .gnu.linkonce.wi.*) } \
545 .debug_abbrev 0 : { *(.debug_abbrev) } \
546 .debug_line 0 : { *(.debug_line) } \
547 .debug_frame 0 : { *(.debug_frame) } \
548 .debug_str 0 : { *(.debug_str) } \
549 .debug_loc 0 : { *(.debug_loc) } \
550 .debug_macinfo 0 : { *(.debug_macinfo) } \
551 /* SGI/MIPS DWARF 2 extensions */ \
552 .debug_weaknames 0 : { *(.debug_weaknames) } \
553 .debug_funcnames 0 : { *(.debug_funcnames) } \
554 .debug_typenames 0 : { *(.debug_typenames) } \
555 .debug_varnames 0 : { *(.debug_varnames) } \
557 /* Stabs debugging sections. */
558 #define STABS_DEBUG \
559 .stab 0 : { *(.stab) } \
560 .stabstr 0 : { *(.stabstr) } \
561 .stab.excl 0 : { *(.stab.excl) } \
562 .stab.exclstr 0 : { *(.stab.exclstr) } \
563 .stab.index 0 : { *(.stab.index) } \
564 .stab.indexstr 0 : { *(.stab.indexstr) } \
565 .comment 0 : { *(.comment) }
567 #ifdef CONFIG_GENERIC_BUG
570 __bug_table : AT(ADDR(__bug_table) - LOAD_OFFSET) { \
571 VMLINUX_SYMBOL(__start___bug_table) = .; \
573 VMLINUX_SYMBOL(__stop___bug_table) = .; \
581 __jump_table : AT(ADDR(__jump_table) - LOAD_OFFSET) { \
582 VMLINUX_SYMBOL(__start___jump_table) = .; \
584 VMLINUX_SYMBOL(__stop___jump_table) = .; \
587 #ifdef CONFIG_PM_TRACE
590 .tracedata : AT(ADDR(.tracedata) - LOAD_OFFSET) { \
591 VMLINUX_SYMBOL(__tracedata_start) = .; \
593 VMLINUX_SYMBOL(__tracedata_end) = .; \
600 .notes : AT(ADDR(.notes) - LOAD_OFFSET) { \
601 VMLINUX_SYMBOL(__start_notes) = .; \
603 VMLINUX_SYMBOL(__stop_notes) = .; \
606 #define INIT_SETUP(initsetup_align) \
607 . = ALIGN(initsetup_align); \
608 VMLINUX_SYMBOL(__setup_start) = .; \
610 VMLINUX_SYMBOL(__setup_end) = .;
613 *(.initcallearly.init) \
614 VMLINUX_SYMBOL(__early_initcall_end) = .; \
616 *(.initcall0s.init) \
618 *(.initcall1s.init) \
620 *(.initcall2s.init) \
622 *(.initcall3s.init) \
624 *(.initcall4s.init) \
626 *(.initcall5s.init) \
627 *(.initcallrootfs.init) \
629 *(.initcall6s.init) \
634 VMLINUX_SYMBOL(__initcall_start) = .; \
636 VMLINUX_SYMBOL(__initcall_end) = .;
638 #define CON_INITCALL \
639 VMLINUX_SYMBOL(__con_initcall_start) = .; \
640 *(.con_initcall.init) \
641 VMLINUX_SYMBOL(__con_initcall_end) = .;
643 #define SECURITY_INITCALL \
644 VMLINUX_SYMBOL(__security_initcall_start) = .; \
645 *(.security_initcall.init) \
646 VMLINUX_SYMBOL(__security_initcall_end) = .;
648 #ifdef CONFIG_BLK_DEV_INITRD
649 #define INIT_RAM_FS \
651 VMLINUX_SYMBOL(__initramfs_start) = .; \
660 * Default discarded sections.
662 * Some archs want to discard exit text/data at runtime rather than
663 * link time due to cross-section references such as alt instructions,
664 * bug table, eh_frame, etc. DISCARDS must be the last of output
665 * section definitions so that such archs put those in earlier section
678 * PERCPU_VADDR - define output section for percpu area
679 * @vaddr: explicit base address (optional)
680 * @phdr: destination PHDR (optional)
682 * Macro which expands to output section for percpu area. If @vaddr
683 * is not blank, it specifies explicit base address and all percpu
684 * symbols will be offset from the given address. If blank, @vaddr
685 * always equals @laddr + LOAD_OFFSET.
687 * @phdr defines the output PHDR to use if not blank. Be warned that
688 * output PHDR is sticky. If @phdr is specified, the next output
689 * section in the linker script will go there too. @phdr should have
692 * Note that this macros defines __per_cpu_load as an absolute symbol.
693 * If there is no need to put the percpu section at a predetermined
694 * address, use PERCPU().
696 #define PERCPU_VADDR(vaddr, phdr) \
697 VMLINUX_SYMBOL(__per_cpu_load) = .; \
698 .data..percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load) \
700 VMLINUX_SYMBOL(__per_cpu_start) = .; \
701 *(.data..percpu..first) \
702 . = ALIGN(PAGE_SIZE); \
703 *(.data..percpu..page_aligned) \
704 *(.data..percpu..readmostly) \
706 *(.data..percpu..shared_aligned) \
707 VMLINUX_SYMBOL(__per_cpu_end) = .; \
709 . = VMLINUX_SYMBOL(__per_cpu_load) + SIZEOF(.data..percpu);
712 * PERCPU - define output section for percpu area, simple version
713 * @align: required alignment
715 * Align to @align and outputs output section for percpu area. This
716 * macro doesn't maniuplate @vaddr or @phdr and __per_cpu_load and
717 * __per_cpu_start will be identical.
719 * This macro is equivalent to ALIGN(align); PERCPU_VADDR( , ) except
720 * that __per_cpu_load is defined as a relative symbol against
721 * .data..percpu which is required for relocatable x86_32
724 #define PERCPU(align) \
726 .data..percpu : AT(ADDR(.data..percpu) - LOAD_OFFSET) { \
727 VMLINUX_SYMBOL(__per_cpu_load) = .; \
728 VMLINUX_SYMBOL(__per_cpu_start) = .; \
729 *(.data..percpu..first) \
730 . = ALIGN(PAGE_SIZE); \
731 *(.data..percpu..page_aligned) \
732 *(.data..percpu..readmostly) \
734 *(.data..percpu..shared_aligned) \
735 VMLINUX_SYMBOL(__per_cpu_end) = .; \
740 * Definition of the high level *_SECTION macros
741 * They will fit only a subset of the architectures
747 * All sections are combined in a single .data section.
748 * The sections following CONSTRUCTORS are arranged so their
749 * typical alignment matches.
750 * A cacheline is typical/always less than a PAGE_SIZE so
751 * the sections that has this restriction (or similar)
752 * is located before the ones requiring PAGE_SIZE alignment.
753 * NOSAVE_DATA starts and ends with a PAGE_SIZE alignment which
754 * matches the requirment of PAGE_ALIGNED_DATA.
756 * use 0 as page_align if page_aligned data is not used */
757 #define RW_DATA_SECTION(cacheline, pagealigned, inittask) \
758 . = ALIGN(PAGE_SIZE); \
759 .data : AT(ADDR(.data) - LOAD_OFFSET) { \
760 INIT_TASK_DATA(inittask) \
762 PAGE_ALIGNED_DATA(pagealigned) \
763 CACHELINE_ALIGNED_DATA(cacheline) \
764 READ_MOSTLY_DATA(cacheline) \
769 #define INIT_TEXT_SECTION(inittext_align) \
770 . = ALIGN(inittext_align); \
771 .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) { \
772 VMLINUX_SYMBOL(_sinittext) = .; \
774 VMLINUX_SYMBOL(_einittext) = .; \
777 #define INIT_DATA_SECTION(initsetup_align) \
778 .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) { \
780 INIT_SETUP(initsetup_align) \
787 #define BSS_SECTION(sbss_align, bss_align, stop_align) \
788 . = ALIGN(sbss_align); \
789 VMLINUX_SYMBOL(__bss_start) = .; \
792 . = ALIGN(stop_align); \
793 VMLINUX_SYMBOL(__bss_stop) = .;
This page took 0.049563 seconds and 6 git commands to generate.