include/asm-mips/mach-cobalt/cobalt.h

   1 /*
   2  * Lowlevel hardware stuff for the MIPS based Cobalt microservers.
   3  *
   4  * This file is subject to the terms and conditions of the GNU General Public
   5  * License.  See the file "COPYING" in the main directory of this archive
   6  * for more details.
   7  *
   8  * Copyright (C) 1997 Cobalt Microserver
   9  * Copyright (C) 1997, 2003 Ralf Baechle
  10  * Copyright (C) 2001, 2002, 2003 Liam Davies (ldavies@agile.tv)
  11  */
  12 #ifndef __ASM_COBALT_H
  13 #define __ASM_COBALT_H
  14
  15 #include <irq.h>
  16
  17 /*
  18  * i8259 legacy interrupts used on Cobalt:
  19  *
  20  *     8  - RTC
  21  *     9  - PCI
  22  *    14  - IDE0
  23  *    15  - IDE1
  24  */
  25 #define COBALT_QUBE_SLOT_IRQ    9
  26
  27 /*
  28  * CPU IRQs  are 16 ... 23
  29  */
  30 #define COBALT_CPU_IRQ          MIPS_CPU_IRQ_BASE
  31
  32 #define COBALT_GALILEO_IRQ      (COBALT_CPU_IRQ + 2)
  33 #define COBALT_RAQ_SCSI_IRQ     (COBALT_CPU_IRQ + 3)
  34 #define COBALT_ETH0_IRQ         (COBALT_CPU_IRQ + 3)
  35 #define COBALT_QUBE1_ETH0_IRQ   (COBALT_CPU_IRQ + 4)
  36 #define COBALT_ETH1_IRQ         (COBALT_CPU_IRQ + 4)
  37 #define COBALT_SERIAL_IRQ       (COBALT_CPU_IRQ + 5)
  38 #define COBALT_SCSI_IRQ         (COBALT_CPU_IRQ + 5)
  39 #define COBALT_VIA_IRQ          (COBALT_CPU_IRQ + 6)    /* Chained to VIA ISA bridge */
  40
  41 /*
  42  * PCI configuration space manifest constants.  These are wired into
  43  * the board layout according to the PCI spec to enable the software
  44  * to probe the hardware configuration space in a well defined manner.
  45  *
  46  * The PCI_DEVSHFT() macro transforms these values into numbers
  47  * suitable for passing as the dev parameter to the various
  48  * pcibios_read/write_config routines.
  49  */
  50 #define COBALT_PCICONF_CPU      0x06
  51 #define COBALT_PCICONF_ETH0     0x07
  52 #define COBALT_PCICONF_RAQSCSI  0x08
  53 #define COBALT_PCICONF_VIA      0x09
  54 #define COBALT_PCICONF_PCISLOT  0x0A
  55 #define COBALT_PCICONF_ETH1     0x0C
  56
  57
  58 /*
  59  * The Cobalt board id information.  The boards have an ID number wired
  60  * into the VIA that is available in the high nibble of register 94.
  61  * This register is available in the VIA configuration space through the
  62  * interface routines qube_pcibios_read/write_config. See cobalt/pci.c
  63  */
  64 #define VIA_COBALT_BRD_ID_REG  0x94
  65 #define VIA_COBALT_BRD_REG_to_ID(reg)  ((unsigned char) (reg) >> 4)
  66 #define COBALT_BRD_ID_QUBE1    0x3
  67 #define COBALT_BRD_ID_RAQ1     0x4
  68 #define COBALT_BRD_ID_QUBE2    0x5
  69 #define COBALT_BRD_ID_RAQ2     0x6
  70
  71 extern int cobalt_board_id;
  72
  73 #define COBALT_LED_PORT         (*(volatile unsigned char *) CKSEG1ADDR(0x1c000000))
  74 # define COBALT_LED_BAR_LEFT    (1 << 0)        /* Qube */
  75 # define COBALT_LED_BAR_RIGHT   (1 << 1)        /* Qube */
  76 # define COBALT_LED_WEB         (1 << 2)        /* RaQ */
  77 # define COBALT_LED_POWER_OFF   (1 << 3)        /* RaQ */
  78 # define COBALT_LED_RESET       0x0f
  79
  80 #define COBALT_KEY_PORT         ((~*(volatile unsigned int *) CKSEG1ADDR(0x1d000000) >> 24) & COBALT_KEY_MASK)
  81 # define COBALT_KEY_CLEAR       (1 << 1)
  82 # define COBALT_KEY_LEFT        (1 << 2)
  83 # define COBALT_KEY_UP          (1 << 3)
  84 # define COBALT_KEY_DOWN        (1 << 4)
  85 # define COBALT_KEY_RIGHT       (1 << 5)
  86 # define COBALT_KEY_ENTER       (1 << 6)
  87 # define COBALT_KEY_SELECT      (1 << 7)
  88 # define COBALT_KEY_MASK        0xfe
  89
  90 #define COBALT_UART             ((volatile unsigned char *) CKSEG1ADDR(0x1c800000))
  91
  92 #endif /* __ASM_COBALT_H */