[PARISC] Move LBA and SBA register defines to the common ropes.h
[deliverable/linux.git] / include / asm-parisc / ropes.h
1 #ifndef _ASM_PARISC_ROPES_H_
2 #define _ASM_PARISC_ROPES_H_
3
4 #ifdef CONFIG_64BIT
5 /* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */
6 #define ZX1_SUPPORT
7 #endif
8
9 #ifdef CONFIG_PROC_FS
10 /* depends on proc fs support. But costs CPU performance */
11 #undef SBA_COLLECT_STATS
12 #endif
13
14 /*
15 ** The number of pdir entries to "free" before issueing
16 ** a read to PCOM register to flush out PCOM writes.
17 ** Interacts with allocation granularity (ie 4 or 8 entries
18 ** allocated and free'd/purged at a time might make this
19 ** less interesting).
20 */
21 #define DELAYED_RESOURCE_CNT 16
22
23 #define MAX_IOC 2 /* per Ike. Pluto/Astro only have 1. */
24 #define ROPES_PER_IOC 8 /* per Ike half or Pluto/Astro */
25
26 struct ioc {
27 void __iomem *ioc_hpa; /* I/O MMU base address */
28 char *res_map; /* resource map, bit == pdir entry */
29 u64 *pdir_base; /* physical base address */
30 unsigned long ibase; /* pdir IOV Space base - shared w/lba_pci */
31 unsigned long imask; /* pdir IOV Space mask - shared w/lba_pci */
32 #ifdef ZX1_SUPPORT
33 unsigned long iovp_mask; /* help convert IOVA to IOVP */
34 #endif
35 unsigned long *res_hint; /* next avail IOVP - circular search */
36 spinlock_t res_lock;
37 unsigned int res_bitshift; /* from the LEFT! */
38 unsigned int res_size; /* size of resource map in bytes */
39 #ifdef SBA_HINT_SUPPORT
40 /* FIXME : DMA HINTs not used */
41 unsigned long hint_mask_pdir; /* bits used for DMA hints */
42 unsigned int hint_shift_pdir;
43 #endif
44 #if DELAYED_RESOURCE_CNT > 0
45 int saved_cnt;
46 struct sba_dma_pair {
47 dma_addr_t iova;
48 size_t size;
49 } saved[DELAYED_RESOURCE_CNT];
50 #endif
51
52 #ifdef SBA_COLLECT_STATS
53 #define SBA_SEARCH_SAMPLE 0x100
54 unsigned long avg_search[SBA_SEARCH_SAMPLE];
55 unsigned long avg_idx; /* current index into avg_search */
56 unsigned long used_pages;
57 unsigned long msingle_calls;
58 unsigned long msingle_pages;
59 unsigned long msg_calls;
60 unsigned long msg_pages;
61 unsigned long usingle_calls;
62 unsigned long usingle_pages;
63 unsigned long usg_calls;
64 unsigned long usg_pages;
65 #endif
66 /* STUFF We don't need in performance path */
67 unsigned int pdir_size; /* in bytes, determined by IOV Space size */
68 };
69
70 struct sba_device {
71 struct sba_device *next; /* list of SBA's in system */
72 struct parisc_device *dev; /* dev found in bus walk */
73 const char *name;
74 void __iomem *sba_hpa; /* base address */
75 spinlock_t sba_lock;
76 unsigned int flags; /* state/functionality enabled */
77 unsigned int hw_rev; /* HW revision of chip */
78
79 struct resource chip_resv; /* MMIO reserved for chip */
80 struct resource iommu_resv; /* MMIO reserved for iommu */
81
82 unsigned int num_ioc; /* number of on-board IOC's */
83 struct ioc ioc[MAX_IOC];
84 };
85
86 #define ASTRO_RUNWAY_PORT 0x582
87 #define IKE_MERCED_PORT 0x803
88 #define REO_MERCED_PORT 0x804
89 #define REOG_MERCED_PORT 0x805
90 #define PLUTO_MCKINLEY_PORT 0x880
91
92 static inline int IS_ASTRO(struct parisc_device *d) {
93 return d->id.hversion == ASTRO_RUNWAY_PORT;
94 }
95
96 static inline int IS_IKE(struct parisc_device *d) {
97 return d->id.hversion == IKE_MERCED_PORT;
98 }
99
100 static inline int IS_PLUTO(struct parisc_device *d) {
101 return d->id.hversion == PLUTO_MCKINLEY_PORT;
102 }
103
104 #define PLUTO_IOVA_BASE (1UL*1024*1024*1024) /* 1GB */
105 #define PLUTO_IOVA_SIZE (1UL*1024*1024*1024) /* 1GB */
106 #define PLUTO_GART_SIZE (PLUTO_IOVA_SIZE / 2)
107
108 #define SBA_PDIR_VALID_BIT 0x8000000000000000ULL
109
110 #define SBA_AGPGART_COOKIE 0x0000badbadc0ffeeULL
111
112 #define SBA_FUNC_ID 0x0000 /* function id */
113 #define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */
114
115 #define SBA_FUNC_SIZE 4096 /* SBA configuration function reg set */
116
117 #define ASTRO_IOC_OFFSET (32 * SBA_FUNC_SIZE)
118 #define PLUTO_IOC_OFFSET (1 * SBA_FUNC_SIZE)
119 /* Ike's IOC's occupy functions 2 and 3 */
120 #define IKE_IOC_OFFSET(p) ((p+2) * SBA_FUNC_SIZE)
121
122 #define IOC_CTRL 0x8 /* IOC_CTRL offset */
123 #define IOC_CTRL_TC (1 << 0) /* TOC Enable */
124 #define IOC_CTRL_CE (1 << 1) /* Coalesce Enable */
125 #define IOC_CTRL_DE (1 << 2) /* Dillon Enable */
126 #define IOC_CTRL_RM (1 << 8) /* Real Mode */
127 #define IOC_CTRL_NC (1 << 9) /* Non Coherent Mode */
128 #define IOC_CTRL_D4 (1 << 11) /* Disable 4-byte coalescing */
129 #define IOC_CTRL_DD (1 << 13) /* Disable distr. LMMIO range coalescing */
130
131 /*
132 ** Offsets into MBIB (Function 0 on Ike and hopefully Astro)
133 ** Firmware programs this stuff. Don't touch it.
134 */
135 #define LMMIO_DIRECT0_BASE 0x300
136 #define LMMIO_DIRECT0_MASK 0x308
137 #define LMMIO_DIRECT0_ROUTE 0x310
138
139 #define LMMIO_DIST_BASE 0x360
140 #define LMMIO_DIST_MASK 0x368
141 #define LMMIO_DIST_ROUTE 0x370
142
143 #define IOS_DIST_BASE 0x390
144 #define IOS_DIST_MASK 0x398
145 #define IOS_DIST_ROUTE 0x3A0
146
147 #define IOS_DIRECT_BASE 0x3C0
148 #define IOS_DIRECT_MASK 0x3C8
149 #define IOS_DIRECT_ROUTE 0x3D0
150
151 /*
152 ** Offsets into I/O TLB (Function 2 and 3 on Ike)
153 */
154 #define ROPE0_CTL 0x200 /* "regbus pci0" */
155 #define ROPE1_CTL 0x208
156 #define ROPE2_CTL 0x210
157 #define ROPE3_CTL 0x218
158 #define ROPE4_CTL 0x220
159 #define ROPE5_CTL 0x228
160 #define ROPE6_CTL 0x230
161 #define ROPE7_CTL 0x238
162
163 #define IOC_ROPE0_CFG 0x500 /* pluto only */
164 #define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */
165
166 #define HF_ENABLE 0x40
167
168 #define IOC_IBASE 0x300 /* IO TLB */
169 #define IOC_IMASK 0x308
170 #define IOC_PCOM 0x310
171 #define IOC_TCNFG 0x318
172 #define IOC_PDIR_BASE 0x320
173
174 /*
175 ** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
176 ** It's safer (avoid memory corruption) to keep DMA page mappings
177 ** equivalently sized to VM PAGE_SIZE.
178 **
179 ** We really can't avoid generating a new mapping for each
180 ** page since the Virtual Coherence Index has to be generated
181 ** and updated for each page.
182 **
183 ** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse.
184 */
185 #define IOVP_SIZE PAGE_SIZE
186 #define IOVP_SHIFT PAGE_SHIFT
187 #define IOVP_MASK PAGE_MASK
188
189 #define SBA_PERF_CFG 0x708 /* Performance Counter stuff */
190 #define SBA_PERF_MASK1 0x718
191 #define SBA_PERF_MASK2 0x730
192
193 /*
194 ** Offsets into PCI Performance Counters (functions 12 and 13)
195 ** Controlled by PERF registers in function 2 & 3 respectively.
196 */
197 #define SBA_PERF_CNT1 0x200
198 #define SBA_PERF_CNT2 0x208
199 #define SBA_PERF_CNT3 0x210
200
201 /*
202 ** lba_device: Per instance Elroy data structure
203 */
204 struct lba_device {
205 struct pci_hba_data hba;
206
207 spinlock_t lba_lock;
208 void *iosapic_obj;
209
210 #ifdef CONFIG_64BIT
211 void __iomem *iop_base; /* PA_VIEW - for IO port accessor funcs */
212 #endif
213
214 int flags; /* state/functionality enabled */
215 int hw_rev; /* HW revision of chip */
216 };
217
218 #define ELROY_HVERS 0x782
219 #define MERCURY_HVERS 0x783
220 #define QUICKSILVER_HVERS 0x784
221
222 static inline int IS_ELROY(struct parisc_device *d) {
223 return (d->id.hversion == ELROY_HVERS);
224 }
225
226 static inline int IS_MERCURY(struct parisc_device *d) {
227 return (d->id.hversion == MERCURY_HVERS);
228 }
229
230 static inline int IS_QUICKSILVER(struct parisc_device *d) {
231 return (d->id.hversion == QUICKSILVER_HVERS);
232 }
233
234 /*
235 ** I/O SAPIC init function
236 ** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC.
237 ** Call setup as part of per instance initialization.
238 ** (ie *not* init_module() function unless only one is present.)
239 ** fixup_irq is to initialize PCI IRQ line support and
240 ** virtualize pcidev->irq value. To be called by pci_fixup_bus().
241 */
242 extern void *iosapic_register(unsigned long hpa);
243 extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev);
244
245 #define LBA_FUNC_ID 0x0000 /* function id */
246 #define LBA_FCLASS 0x0008 /* function class, bist, header, rev... */
247 #define LBA_CAPABLE 0x0030 /* capabilities register */
248
249 #define LBA_PCI_CFG_ADDR 0x0040 /* poke CFG address here */
250 #define LBA_PCI_CFG_DATA 0x0048 /* read or write data here */
251
252 #define LBA_PMC_MTLT 0x0050 /* Firmware sets this - read only. */
253 #define LBA_FW_SCRATCH 0x0058 /* Firmware writes the PCI bus number here. */
254 #define LBA_ERROR_ADDR 0x0070 /* On error, address gets logged here */
255
256 #define LBA_ARB_MASK 0x0080 /* bit 0 enable arbitration. PAT/PDC enables */
257 #define LBA_ARB_PRI 0x0088 /* firmware sets this. */
258 #define LBA_ARB_MODE 0x0090 /* firmware sets this. */
259 #define LBA_ARB_MTLT 0x0098 /* firmware sets this. */
260
261 #define LBA_MOD_ID 0x0100 /* Module ID. PDC_PAT_CELL reports 4 */
262
263 #define LBA_STAT_CTL 0x0108 /* Status & Control */
264 #define LBA_BUS_RESET 0x01 /* Deassert PCI Bus Reset Signal */
265 #define CLEAR_ERRLOG 0x10 /* "Clear Error Log" cmd */
266 #define CLEAR_ERRLOG_ENABLE 0x20 /* "Clear Error Log" Enable */
267 #define HF_ENABLE 0x40 /* enable HF mode (default is -1 mode) */
268
269 #define LBA_LMMIO_BASE 0x0200 /* < 4GB I/O address range */
270 #define LBA_LMMIO_MASK 0x0208
271
272 #define LBA_GMMIO_BASE 0x0210 /* > 4GB I/O address range */
273 #define LBA_GMMIO_MASK 0x0218
274
275 #define LBA_WLMMIO_BASE 0x0220 /* All < 4GB ranges under the same *SBA* */
276 #define LBA_WLMMIO_MASK 0x0228
277
278 #define LBA_WGMMIO_BASE 0x0230 /* All > 4GB ranges under the same *SBA* */
279 #define LBA_WGMMIO_MASK 0x0238
280
281 #define LBA_IOS_BASE 0x0240 /* I/O port space for this LBA */
282 #define LBA_IOS_MASK 0x0248
283
284 #define LBA_ELMMIO_BASE 0x0250 /* Extra LMMIO range */
285 #define LBA_ELMMIO_MASK 0x0258
286
287 #define LBA_EIOS_BASE 0x0260 /* Extra I/O port space */
288 #define LBA_EIOS_MASK 0x0268
289
290 #define LBA_GLOBAL_MASK 0x0270 /* Mercury only: Global Address Mask */
291 #define LBA_DMA_CTL 0x0278 /* firmware sets this */
292
293 #define LBA_IBASE 0x0300 /* SBA DMA support */
294 #define LBA_IMASK 0x0308
295
296 /* FIXME: ignore DMA Hint stuff until we can measure performance */
297 #define LBA_HINT_CFG 0x0310
298 #define LBA_HINT_BASE 0x0380 /* 14 registers at every 8 bytes. */
299
300 #define LBA_BUS_MODE 0x0620
301
302 /* ERROR regs are needed for config cycle kluges */
303 #define LBA_ERROR_CONFIG 0x0680
304 #define LBA_SMART_MODE 0x20
305 #define LBA_ERROR_STATUS 0x0688
306 #define LBA_ROPE_CTL 0x06A0
307
308 #define LBA_IOSAPIC_BASE 0x800 /* Offset of IRQ logic */
309
310 #endif /*_ASM_PARISC_ROPES_H_*/
This page took 0.045463 seconds and 6 git commands to generate.