include/asm-ppc/irq.h

   1 #ifdef __KERNEL__
   2 #ifndef _ASM_IRQ_H
   3 #define _ASM_IRQ_H
   4
   5 #include <linux/config.h>
   6 #include <asm/machdep.h>                /* ppc_md */
   7 #include <asm/atomic.h>
   8
   9 /*
  10  * These constants are used for passing information about interrupt
  11  * signal polarity and level/edge sensing to the low-level PIC chip
  12  * drivers.
  13  */
  14 #define IRQ_SENSE_MASK          0x1
  15 #define IRQ_SENSE_LEVEL         0x1     /* interrupt on active level */
  16 #define IRQ_SENSE_EDGE          0x0     /* interrupt triggered by edge */
  17
  18 #define IRQ_POLARITY_MASK       0x2
  19 #define IRQ_POLARITY_POSITIVE   0x2     /* high level or low->high edge */
  20 #define IRQ_POLARITY_NEGATIVE   0x0     /* low level or high->low edge */
  21
  22 /*
  23  * IRQ line status macro IRQ_PER_CPU is used
  24  */
  25 #define ARCH_HAS_IRQ_PER_CPU
  26
  27 #define get_irq_desc(irq) (&irq_desc[(irq)])
  28
  29 /* Define a way to iterate across irqs. */
  30 #define for_each_irq(i) \
  31         for ((i) = 0; (i) < NR_IRQS; ++(i))
  32
  33 #if defined(CONFIG_40x)
  34 #include <asm/ibm4xx.h>
  35
  36 #ifndef NR_BOARD_IRQS
  37 #define NR_BOARD_IRQS 0
  38 #endif
  39
  40 #ifndef UIC_WIDTH /* Number of interrupts per device */
  41 #define UIC_WIDTH 32
  42 #endif
  43
  44 #ifndef NR_UICS /* number  of UIC devices */
  45 #define NR_UICS 1
  46 #endif
  47
  48 #if defined (CONFIG_403)
  49 /*
  50  * The PowerPC 403 cores' Asynchronous Interrupt Controller (AIC) has
  51  * 32 possible interrupts, a majority of which are not implemented on
  52  * all cores. There are six configurable, external interrupt pins and
  53  * there are eight internal interrupts for the on-chip serial port
  54  * (SPU), DMA controller, and JTAG controller.
  55  *
  56  */
  57
  58 #define NR_AIC_IRQS 32
  59 #define NR_IRQS  (NR_AIC_IRQS + NR_BOARD_IRQS)
  60
  61 #elif !defined (CONFIG_403)
  62
  63 /*
  64  *  The PowerPC 405 cores' Universal Interrupt Controller (UIC) has 32
  65  * possible interrupts as well. There are seven, configurable external
  66  * interrupt pins and there are 17 internal interrupts for the on-chip
  67  * serial port, DMA controller, on-chip Ethernet controller, PCI, etc.
  68  *
  69  */
  70
  71
  72 #define NR_UIC_IRQS UIC_WIDTH
  73 #define NR_IRQS         ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
  74 #endif
  75 static __inline__ int
  76 irq_canonicalize(int irq)
  77 {
  78         return (irq);
  79 }
  80
  81 #elif defined(CONFIG_44x)
  82 #include <asm/ibm44x.h>
  83
  84 #define NR_UIC_IRQS     32
  85 #define NR_IRQS         ((NR_UIC_IRQS * NR_UICS) + NR_BOARD_IRQS)
  86
  87 static __inline__ int
  88 irq_canonicalize(int irq)
  89 {
  90         return (irq);
  91 }
  92
  93 #elif defined(CONFIG_8xx)
  94
  95 /* Now include the board configuration specific associations.
  96 */
  97 #include <asm/mpc8xx.h>
  98
  99 /* The MPC8xx cores have 16 possible interrupts.  There are eight
 100  * possible level sensitive interrupts assigned and generated internally
 101  * from such devices as CPM, PCMCIA, RTC, PIT, TimeBase and Decrementer.
 102  * There are eight external interrupts (IRQs) that can be configured
 103  * as either level or edge sensitive.
 104  *
 105  * On some implementations, there is also the possibility of an 8259
 106  * through the PCI and PCI-ISA bridges.
 107  *
 108  * We are "flattening" the interrupt vectors of the cascaded CPM
 109  * and 8259 interrupt controllers so that we can uniquely identify
 110  * any interrupt source with a single integer.
 111  */
 112 #define NR_SIU_INTS     16
 113 #define NR_CPM_INTS     32
 114 #ifndef NR_8259_INTS
 115 #define NR_8259_INTS 0
 116 #endif
 117
 118 #define SIU_IRQ_OFFSET          0
 119 #define CPM_IRQ_OFFSET          (SIU_IRQ_OFFSET + NR_SIU_INTS)
 120 #define I8259_IRQ_OFFSET        (CPM_IRQ_OFFSET + NR_CPM_INTS)
 121
 122 #define NR_IRQS (NR_SIU_INTS + NR_CPM_INTS + NR_8259_INTS)
 123
 124 /* These values must be zero-based and map 1:1 with the SIU configuration.
 125  * They are used throughout the 8xx I/O subsystem to generate
 126  * interrupt masks, flags, and other control patterns.  This is why the
 127  * current kernel assumption of the 8259 as the base controller is such
 128  * a pain in the butt.
 129  */
 130 #define SIU_IRQ0        (0)     /* Highest priority */
 131 #define SIU_LEVEL0      (1)
 132 #define SIU_IRQ1        (2)
 133 #define SIU_LEVEL1      (3)
 134 #define SIU_IRQ2        (4)
 135 #define SIU_LEVEL2      (5)
 136 #define SIU_IRQ3        (6)
 137 #define SIU_LEVEL3      (7)
 138 #define SIU_IRQ4        (8)
 139 #define SIU_LEVEL4      (9)
 140 #define SIU_IRQ5        (10)
 141 #define SIU_LEVEL5      (11)
 142 #define SIU_IRQ6        (12)
 143 #define SIU_LEVEL6      (13)
 144 #define SIU_IRQ7        (14)
 145 #define SIU_LEVEL7      (15)
 146
 147 #define MPC8xx_INT_FEC1         SIU_LEVEL1
 148 #define MPC8xx_INT_FEC2         SIU_LEVEL3
 149
 150 #define MPC8xx_INT_SCC1         (CPM_IRQ_OFFSET + CPMVEC_SCC1)
 151 #define MPC8xx_INT_SCC2         (CPM_IRQ_OFFSET + CPMVEC_SCC2)
 152 #define MPC8xx_INT_SCC3         (CPM_IRQ_OFFSET + CPMVEC_SCC3)
 153 #define MPC8xx_INT_SCC4         (CPM_IRQ_OFFSET + CPMVEC_SCC4)
 154 #define MPC8xx_INT_SMC1         (CPM_IRQ_OFFSET + CPMVEC_SMC1)
 155 #define MPC8xx_INT_SMC2         (CPM_IRQ_OFFSET + CPMVEC_SMC2)
 156
 157 /* The internal interrupts we can configure as we see fit.
 158  * My personal preference is CPM at level 2, which puts it above the
 159  * MBX PCI/ISA/IDE interrupts.
 160  */
 161 #ifndef PIT_INTERRUPT
 162 #define PIT_INTERRUPT           SIU_LEVEL0
 163 #endif
 164 #ifndef CPM_INTERRUPT
 165 #define CPM_INTERRUPT           SIU_LEVEL2
 166 #endif
 167 #ifndef PCMCIA_INTERRUPT
 168 #define PCMCIA_INTERRUPT        SIU_LEVEL6
 169 #endif
 170 #ifndef DEC_INTERRUPT
 171 #define DEC_INTERRUPT           SIU_LEVEL7
 172 #endif
 173
 174 /* Some internal interrupt registers use an 8-bit mask for the interrupt
 175  * level instead of a number.
 176  */
 177 #define mk_int_int_mask(IL) (1 << (7 - (IL/2)))
 178
 179 /* always the same on 8xx -- Cort */
 180 static __inline__ int irq_canonicalize(int irq)
 181 {
 182         return irq;
 183 }
 184
 185 #elif defined(CONFIG_83xx)
 186 #include <asm/mpc83xx.h>
 187
 188 static __inline__ int irq_canonicalize(int irq)
 189 {
 190         return irq;
 191 }
 192
 193 #define NR_IRQS (NR_IPIC_INTS)
 194
 195 #elif defined(CONFIG_85xx)
 196 /* Now include the board configuration specific associations.
 197 */
 198 #include <asm/mpc85xx.h>
 199
 200 /* The MPC8548 openpic has 48 internal interrupts and 12 external
 201  * interrupts.
 202  *
 203  * We are "flattening" the interrupt vectors of the cascaded CPM
 204  * so that we can uniquely identify any interrupt source with a
 205  * single integer.
 206  */
 207 #define NR_CPM_INTS     64
 208 #define NR_EPIC_INTS    60
 209 #ifndef NR_8259_INTS
 210 #define NR_8259_INTS    0
 211 #endif
 212 #define NUM_8259_INTERRUPTS NR_8259_INTS
 213
 214 #ifndef CPM_IRQ_OFFSET
 215 #define CPM_IRQ_OFFSET  0
 216 #endif
 217
 218 #define NR_IRQS (NR_EPIC_INTS + NR_CPM_INTS + NR_8259_INTS)
 219
 220 /* Internal IRQs on MPC85xx OpenPIC */
 221
 222 #ifndef MPC85xx_OPENPIC_IRQ_OFFSET
 223 #ifdef CONFIG_CPM2
 224 #define MPC85xx_OPENPIC_IRQ_OFFSET      (CPM_IRQ_OFFSET + NR_CPM_INTS)
 225 #else
 226 #define MPC85xx_OPENPIC_IRQ_OFFSET      0
 227 #endif
 228 #endif
 229
 230 /* Not all of these exist on all MPC85xx implementations */
 231 #define MPC85xx_IRQ_L2CACHE     ( 0 + MPC85xx_OPENPIC_IRQ_OFFSET)
 232 #define MPC85xx_IRQ_ECM         ( 1 + MPC85xx_OPENPIC_IRQ_OFFSET)
 233 #define MPC85xx_IRQ_DDR         ( 2 + MPC85xx_OPENPIC_IRQ_OFFSET)
 234 #define MPC85xx_IRQ_LBIU        ( 3 + MPC85xx_OPENPIC_IRQ_OFFSET)
 235 #define MPC85xx_IRQ_DMA0        ( 4 + MPC85xx_OPENPIC_IRQ_OFFSET)
 236 #define MPC85xx_IRQ_DMA1        ( 5 + MPC85xx_OPENPIC_IRQ_OFFSET)
 237 #define MPC85xx_IRQ_DMA2        ( 6 + MPC85xx_OPENPIC_IRQ_OFFSET)
 238 #define MPC85xx_IRQ_DMA3        ( 7 + MPC85xx_OPENPIC_IRQ_OFFSET)
 239 #define MPC85xx_IRQ_PCI1        ( 8 + MPC85xx_OPENPIC_IRQ_OFFSET)
 240 #define MPC85xx_IRQ_PCI2        ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
 241 #define MPC85xx_IRQ_RIO_ERROR   ( 9 + MPC85xx_OPENPIC_IRQ_OFFSET)
 242 #define MPC85xx_IRQ_RIO_BELL    (10 + MPC85xx_OPENPIC_IRQ_OFFSET)
 243 #define MPC85xx_IRQ_RIO_TX      (11 + MPC85xx_OPENPIC_IRQ_OFFSET)
 244 #define MPC85xx_IRQ_RIO_RX      (12 + MPC85xx_OPENPIC_IRQ_OFFSET)
 245 #define MPC85xx_IRQ_TSEC1_TX    (13 + MPC85xx_OPENPIC_IRQ_OFFSET)
 246 #define MPC85xx_IRQ_TSEC1_RX    (14 + MPC85xx_OPENPIC_IRQ_OFFSET)
 247 #define MPC85xx_IRQ_TSEC3_TX    (15 + MPC85xx_OPENPIC_IRQ_OFFSET)
 248 #define MPC85xx_IRQ_TSEC3_RX    (16 + MPC85xx_OPENPIC_IRQ_OFFSET)
 249 #define MPC85xx_IRQ_TSEC3_ERROR (17 + MPC85xx_OPENPIC_IRQ_OFFSET)
 250 #define MPC85xx_IRQ_TSEC1_ERROR (18 + MPC85xx_OPENPIC_IRQ_OFFSET)
 251 #define MPC85xx_IRQ_TSEC2_TX    (19 + MPC85xx_OPENPIC_IRQ_OFFSET)
 252 #define MPC85xx_IRQ_TSEC2_RX    (20 + MPC85xx_OPENPIC_IRQ_OFFSET)
 253 #define MPC85xx_IRQ_TSEC4_TX    (21 + MPC85xx_OPENPIC_IRQ_OFFSET)
 254 #define MPC85xx_IRQ_TSEC4_RX    (22 + MPC85xx_OPENPIC_IRQ_OFFSET)
 255 #define MPC85xx_IRQ_TSEC4_ERROR (23 + MPC85xx_OPENPIC_IRQ_OFFSET)
 256 #define MPC85xx_IRQ_TSEC2_ERROR (24 + MPC85xx_OPENPIC_IRQ_OFFSET)
 257 #define MPC85xx_IRQ_FEC         (25 + MPC85xx_OPENPIC_IRQ_OFFSET)
 258 #define MPC85xx_IRQ_DUART       (26 + MPC85xx_OPENPIC_IRQ_OFFSET)
 259 #define MPC85xx_IRQ_IIC1        (27 + MPC85xx_OPENPIC_IRQ_OFFSET)
 260 #define MPC85xx_IRQ_PERFMON     (28 + MPC85xx_OPENPIC_IRQ_OFFSET)
 261 #define MPC85xx_IRQ_SEC2        (29 + MPC85xx_OPENPIC_IRQ_OFFSET)
 262 #define MPC85xx_IRQ_CPM         (30 + MPC85xx_OPENPIC_IRQ_OFFSET)
 263
 264 /* The 12 external interrupt lines */
 265 #define MPC85xx_IRQ_EXT0        (48 + MPC85xx_OPENPIC_IRQ_OFFSET)
 266 #define MPC85xx_IRQ_EXT1        (49 + MPC85xx_OPENPIC_IRQ_OFFSET)
 267 #define MPC85xx_IRQ_EXT2        (50 + MPC85xx_OPENPIC_IRQ_OFFSET)
 268 #define MPC85xx_IRQ_EXT3        (51 + MPC85xx_OPENPIC_IRQ_OFFSET)
 269 #define MPC85xx_IRQ_EXT4        (52 + MPC85xx_OPENPIC_IRQ_OFFSET)
 270 #define MPC85xx_IRQ_EXT5        (53 + MPC85xx_OPENPIC_IRQ_OFFSET)
 271 #define MPC85xx_IRQ_EXT6        (54 + MPC85xx_OPENPIC_IRQ_OFFSET)
 272 #define MPC85xx_IRQ_EXT7        (55 + MPC85xx_OPENPIC_IRQ_OFFSET)
 273 #define MPC85xx_IRQ_EXT8        (56 + MPC85xx_OPENPIC_IRQ_OFFSET)
 274 #define MPC85xx_IRQ_EXT9        (57 + MPC85xx_OPENPIC_IRQ_OFFSET)
 275 #define MPC85xx_IRQ_EXT10       (58 + MPC85xx_OPENPIC_IRQ_OFFSET)
 276 #define MPC85xx_IRQ_EXT11       (59 + MPC85xx_OPENPIC_IRQ_OFFSET)
 277
 278 /* CPM related interrupts */
 279 #define SIU_INT_ERROR           ((uint)0x00+CPM_IRQ_OFFSET)
 280 #define SIU_INT_I2C             ((uint)0x01+CPM_IRQ_OFFSET)
 281 #define SIU_INT_SPI             ((uint)0x02+CPM_IRQ_OFFSET)
 282 #define SIU_INT_RISC            ((uint)0x03+CPM_IRQ_OFFSET)
 283 #define SIU_INT_SMC1            ((uint)0x04+CPM_IRQ_OFFSET)
 284 #define SIU_INT_SMC2            ((uint)0x05+CPM_IRQ_OFFSET)
 285 #define SIU_INT_USB             ((uint)0x0b+CPM_IRQ_OFFSET)
 286 #define SIU_INT_TIMER1          ((uint)0x0c+CPM_IRQ_OFFSET)
 287 #define SIU_INT_TIMER2          ((uint)0x0d+CPM_IRQ_OFFSET)
 288 #define SIU_INT_TIMER3          ((uint)0x0e+CPM_IRQ_OFFSET)
 289 #define SIU_INT_TIMER4          ((uint)0x0f+CPM_IRQ_OFFSET)
 290 #define SIU_INT_FCC1            ((uint)0x20+CPM_IRQ_OFFSET)
 291 #define SIU_INT_FCC2            ((uint)0x21+CPM_IRQ_OFFSET)
 292 #define SIU_INT_FCC3            ((uint)0x22+CPM_IRQ_OFFSET)
 293 #define SIU_INT_MCC1            ((uint)0x24+CPM_IRQ_OFFSET)
 294 #define SIU_INT_MCC2            ((uint)0x25+CPM_IRQ_OFFSET)
 295 #define SIU_INT_SCC1            ((uint)0x28+CPM_IRQ_OFFSET)
 296 #define SIU_INT_SCC2            ((uint)0x29+CPM_IRQ_OFFSET)
 297 #define SIU_INT_SCC3            ((uint)0x2a+CPM_IRQ_OFFSET)
 298 #define SIU_INT_SCC4            ((uint)0x2b+CPM_IRQ_OFFSET)
 299 #define SIU_INT_PC15            ((uint)0x30+CPM_IRQ_OFFSET)
 300 #define SIU_INT_PC14            ((uint)0x31+CPM_IRQ_OFFSET)
 301 #define SIU_INT_PC13            ((uint)0x32+CPM_IRQ_OFFSET)
 302 #define SIU_INT_PC12            ((uint)0x33+CPM_IRQ_OFFSET)
 303 #define SIU_INT_PC11            ((uint)0x34+CPM_IRQ_OFFSET)
 304 #define SIU_INT_PC10            ((uint)0x35+CPM_IRQ_OFFSET)
 305 #define SIU_INT_PC9             ((uint)0x36+CPM_IRQ_OFFSET)
 306 #define SIU_INT_PC8             ((uint)0x37+CPM_IRQ_OFFSET)
 307 #define SIU_INT_PC7             ((uint)0x38+CPM_IRQ_OFFSET)
 308 #define SIU_INT_PC6             ((uint)0x39+CPM_IRQ_OFFSET)
 309 #define SIU_INT_PC5             ((uint)0x3a+CPM_IRQ_OFFSET)
 310 #define SIU_INT_PC4             ((uint)0x3b+CPM_IRQ_OFFSET)
 311 #define SIU_INT_PC3             ((uint)0x3c+CPM_IRQ_OFFSET)
 312 #define SIU_INT_PC2             ((uint)0x3d+CPM_IRQ_OFFSET)
 313 #define SIU_INT_PC1             ((uint)0x3e+CPM_IRQ_OFFSET)
 314 #define SIU_INT_PC0             ((uint)0x3f+CPM_IRQ_OFFSET)
 315
 316 static __inline__ int irq_canonicalize(int irq)
 317 {
 318         return irq;
 319 }
 320
 321 #else /* CONFIG_40x + CONFIG_8xx */
 322 /*
 323  * this is the # irq's for all ppc arch's (pmac/chrp/prep)
 324  * so it is the max of them all
 325  */
 326 #define NR_IRQS                 256
 327
 328 #ifndef CONFIG_8260
 329
 330 #define NUM_8259_INTERRUPTS     16
 331
 332 #else /* CONFIG_8260 */
 333
 334 /* The 8260 has an internal interrupt controller with a maximum of
 335  * 64 IRQs.  We will use NR_IRQs from above since it is large enough.
 336  * Don't be confused by the 8260 documentation where they list an
 337  * "interrupt number" and "interrupt vector".  We are only interested
 338  * in the interrupt vector.  There are "reserved" holes where the
 339  * vector number increases, but the interrupt number in the table does not.
 340  * (Document errata updates have fixed this...make sure you have up to
 341  * date processor documentation -- Dan).
 342  */
 343
 344 #ifndef CPM_IRQ_OFFSET
 345 #define CPM_IRQ_OFFSET  0
 346 #endif
 347
 348 #define NR_CPM_INTS     64
 349
 350 #define SIU_INT_ERROR           ((uint)0x00 + CPM_IRQ_OFFSET)
 351 #define SIU_INT_I2C             ((uint)0x01 + CPM_IRQ_OFFSET)
 352 #define SIU_INT_SPI             ((uint)0x02 + CPM_IRQ_OFFSET)
 353 #define SIU_INT_RISC            ((uint)0x03 + CPM_IRQ_OFFSET)
 354 #define SIU_INT_SMC1            ((uint)0x04 + CPM_IRQ_OFFSET)
 355 #define SIU_INT_SMC2            ((uint)0x05 + CPM_IRQ_OFFSET)
 356 #define SIU_INT_IDMA1           ((uint)0x06 + CPM_IRQ_OFFSET)
 357 #define SIU_INT_IDMA2           ((uint)0x07 + CPM_IRQ_OFFSET)
 358 #define SIU_INT_IDMA3           ((uint)0x08 + CPM_IRQ_OFFSET)
 359 #define SIU_INT_IDMA4           ((uint)0x09 + CPM_IRQ_OFFSET)
 360 #define SIU_INT_SDMA            ((uint)0x0a + CPM_IRQ_OFFSET)
 361 #define SIU_INT_USB             ((uint)0x0b + CPM_IRQ_OFFSET)
 362 #define SIU_INT_TIMER1          ((uint)0x0c + CPM_IRQ_OFFSET)
 363 #define SIU_INT_TIMER2          ((uint)0x0d + CPM_IRQ_OFFSET)
 364 #define SIU_INT_TIMER3          ((uint)0x0e + CPM_IRQ_OFFSET)
 365 #define SIU_INT_TIMER4          ((uint)0x0f + CPM_IRQ_OFFSET)
 366 #define SIU_INT_TMCNT           ((uint)0x10 + CPM_IRQ_OFFSET)
 367 #define SIU_INT_PIT             ((uint)0x11 + CPM_IRQ_OFFSET)
 368 #define SIU_INT_IRQ1            ((uint)0x13 + CPM_IRQ_OFFSET)
 369 #define SIU_INT_IRQ2            ((uint)0x14 + CPM_IRQ_OFFSET)
 370 #define SIU_INT_IRQ3            ((uint)0x15 + CPM_IRQ_OFFSET)
 371 #define SIU_INT_IRQ4            ((uint)0x16 + CPM_IRQ_OFFSET)
 372 #define SIU_INT_IRQ5            ((uint)0x17 + CPM_IRQ_OFFSET)
 373 #define SIU_INT_IRQ6            ((uint)0x18 + CPM_IRQ_OFFSET)
 374 #define SIU_INT_IRQ7            ((uint)0x19 + CPM_IRQ_OFFSET)
 375 #define SIU_INT_FCC1            ((uint)0x20 + CPM_IRQ_OFFSET)
 376 #define SIU_INT_FCC2            ((uint)0x21 + CPM_IRQ_OFFSET)
 377 #define SIU_INT_FCC3            ((uint)0x22 + CPM_IRQ_OFFSET)
 378 #define SIU_INT_MCC1            ((uint)0x24 + CPM_IRQ_OFFSET)
 379 #define SIU_INT_MCC2            ((uint)0x25 + CPM_IRQ_OFFSET)
 380 #define SIU_INT_SCC1            ((uint)0x28 + CPM_IRQ_OFFSET)
 381 #define SIU_INT_SCC2            ((uint)0x29 + CPM_IRQ_OFFSET)
 382 #define SIU_INT_SCC3            ((uint)0x2a + CPM_IRQ_OFFSET)
 383 #define SIU_INT_SCC4            ((uint)0x2b + CPM_IRQ_OFFSET)
 384 #define SIU_INT_PC15            ((uint)0x30 + CPM_IRQ_OFFSET)
 385 #define SIU_INT_PC14            ((uint)0x31 + CPM_IRQ_OFFSET)
 386 #define SIU_INT_PC13            ((uint)0x32 + CPM_IRQ_OFFSET)
 387 #define SIU_INT_PC12            ((uint)0x33 + CPM_IRQ_OFFSET)
 388 #define SIU_INT_PC11            ((uint)0x34 + CPM_IRQ_OFFSET)
 389 #define SIU_INT_PC10            ((uint)0x35 + CPM_IRQ_OFFSET)
 390 #define SIU_INT_PC9             ((uint)0x36 + CPM_IRQ_OFFSET)
 391 #define SIU_INT_PC8             ((uint)0x37 + CPM_IRQ_OFFSET)
 392 #define SIU_INT_PC7             ((uint)0x38 + CPM_IRQ_OFFSET)
 393 #define SIU_INT_PC6             ((uint)0x39 + CPM_IRQ_OFFSET)
 394 #define SIU_INT_PC5             ((uint)0x3a + CPM_IRQ_OFFSET)
 395 #define SIU_INT_PC4             ((uint)0x3b + CPM_IRQ_OFFSET)
 396 #define SIU_INT_PC3             ((uint)0x3c + CPM_IRQ_OFFSET)
 397 #define SIU_INT_PC2             ((uint)0x3d + CPM_IRQ_OFFSET)
 398 #define SIU_INT_PC1             ((uint)0x3e + CPM_IRQ_OFFSET)
 399 #define SIU_INT_PC0             ((uint)0x3f + CPM_IRQ_OFFSET)
 400
 401 #endif /* CONFIG_8260 */
 402
 403 /*
 404  * This gets called from serial.c, which is now used on
 405  * powermacs as well as prep/chrp boxes.
 406  * Prep and chrp both have cascaded 8259 PICs.
 407  */
 408 static __inline__ int irq_canonicalize(int irq)
 409 {
 410         if (ppc_md.irq_canonicalize)
 411                 return ppc_md.irq_canonicalize(irq);
 412         return irq;
 413 }
 414
 415 #endif
 416
 417 #define NR_MASK_WORDS   ((NR_IRQS + 31) / 32)
 418 /* pedantic: these are long because they are used with set_bit --RR */
 419 extern unsigned long ppc_cached_irq_mask[NR_MASK_WORDS];
 420 extern unsigned long ppc_lost_interrupts[NR_MASK_WORDS];
 421 extern atomic_t ppc_n_lost_interrupts;
 422
 423 #endif /* _ASM_IRQ_H */
 424 #endif /* __KERNEL__ */