2 * linux/include/amba/bus.h
4 * This device type deals with ARM PrimeCells and anything else that
5 * presents a proper CID (0xB105F00D) at the end of the I/O register
6 * region or that is derived from a PrimeCell.
8 * Copyright (C) 2003 Deep Blue Solutions Ltd, All Rights Reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
17 #include <linux/clk.h>
18 #include <linux/device.h>
19 #include <linux/mod_devicetable.h>
20 #include <linux/err.h>
21 #include <linux/resource.h>
22 #include <linux/regulator/consumer.h>
24 #define AMBA_NR_IRQS 2
25 #define AMBA_CID 0xb105f00d
34 unsigned int periphid
;
35 unsigned int irq
[AMBA_NR_IRQS
];
39 struct device_driver drv
;
40 int (*probe
)(struct amba_device
*, const struct amba_id
*);
41 int (*remove
)(struct amba_device
*);
42 void (*shutdown
)(struct amba_device
*);
43 int (*suspend
)(struct amba_device
*, pm_message_t
);
44 int (*resume
)(struct amba_device
*);
45 const struct amba_id
*id_table
;
49 AMBA_VENDOR_ARM
= 0x41,
50 AMBA_VENDOR_ST
= 0x80,
53 extern struct bus_type amba_bustype
;
55 #define to_amba_device(d) container_of(d, struct amba_device, dev)
57 #define amba_get_drvdata(d) dev_get_drvdata(&d->dev)
58 #define amba_set_drvdata(d,p) dev_set_drvdata(&d->dev, p)
60 int amba_driver_register(struct amba_driver
*);
61 void amba_driver_unregister(struct amba_driver
*);
62 struct amba_device
*amba_device_alloc(const char *, resource_size_t
, size_t);
63 void amba_device_put(struct amba_device
*);
64 int amba_device_add(struct amba_device
*, struct resource
*);
65 int amba_device_register(struct amba_device
*, struct resource
*);
66 struct amba_device
*amba_apb_device_add(struct device
*parent
, const char *name
,
67 resource_size_t base
, size_t size
,
68 int irq1
, int irq2
, void *pdata
,
69 unsigned int periphid
);
70 struct amba_device
*amba_ahb_device_add(struct device
*parent
, const char *name
,
71 resource_size_t base
, size_t size
,
72 int irq1
, int irq2
, void *pdata
,
73 unsigned int periphid
);
75 amba_apb_device_add_res(struct device
*parent
, const char *name
,
76 resource_size_t base
, size_t size
, int irq1
,
77 int irq2
, void *pdata
, unsigned int periphid
,
78 struct resource
*resbase
);
80 amba_ahb_device_add_res(struct device
*parent
, const char *name
,
81 resource_size_t base
, size_t size
, int irq1
,
82 int irq2
, void *pdata
, unsigned int periphid
,
83 struct resource
*resbase
);
84 void amba_device_unregister(struct amba_device
*);
85 struct amba_device
*amba_find_device(const char *, struct device
*, unsigned int, unsigned int);
86 int amba_request_regions(struct amba_device
*, const char *);
87 void amba_release_regions(struct amba_device
*);
89 #define amba_pclk_enable(d) \
90 (IS_ERR((d)->pclk) ? 0 : clk_enable((d)->pclk))
92 #define amba_pclk_disable(d) \
93 do { if (!IS_ERR((d)->pclk)) clk_disable((d)->pclk); } while (0)
95 /* Some drivers don't use the struct amba_device */
96 #define AMBA_CONFIG_BITS(a) (((a) >> 24) & 0xff)
97 #define AMBA_REV_BITS(a) (((a) >> 20) & 0x0f)
98 #define AMBA_MANF_BITS(a) (((a) >> 12) & 0xff)
99 #define AMBA_PART_BITS(a) ((a) & 0xfff)
101 #define amba_config(d) AMBA_CONFIG_BITS((d)->periphid)
102 #define amba_rev(d) AMBA_REV_BITS((d)->periphid)
103 #define amba_manf(d) AMBA_MANF_BITS((d)->periphid)
104 #define amba_part(d) AMBA_PART_BITS((d)->periphid)
106 #define __AMBA_DEV(busid, data, mask) \
108 .coherent_dma_mask = mask, \
109 .init_name = busid, \
110 .platform_data = data, \
114 * APB devices do not themselves have the ability to address memory,
115 * so DMA masks should be zero (much like USB peripheral devices.)
116 * The DMA controller DMA masks should be used instead (much like
117 * USB host controllers in conventional PCs.)
119 #define AMBA_APB_DEVICE(name, busid, id, base, irqs, data) \
120 struct amba_device name##_device = { \
121 .dev = __AMBA_DEV(busid, data, 0), \
122 .res = DEFINE_RES_MEM(base, SZ_4K), \
128 * AHB devices are DMA capable, so set their DMA masks
130 #define AMBA_AHB_DEVICE(name, busid, id, base, irqs, data) \
131 struct amba_device name##_device = { \
132 .dev = __AMBA_DEV(busid, data, ~0ULL), \
133 .res = DEFINE_RES_MEM(base, SZ_4K), \
140 * module_amba_driver() - Helper macro for drivers that don't do anything
141 * special in module init/exit. This eliminates a lot of boilerplate. Each
142 * module may only use this macro once, and calling it replaces module_init()
145 #define module_amba_driver(__amba_drv) \
146 module_driver(__amba_drv, amba_driver_register, amba_driver_unregister)
This page took 0.035567 seconds and 6 git commands to generate.