Linux-2.6.12-rc2
[deliverable/linux.git] / include / linux / mtd / mtd.h
1 /*
2 * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $
3 *
4 * Copyright (C) 1999-2003 David Woodhouse <dwmw2@infradead.org> et al.
5 *
6 * Released under GPL
7 */
8
9 #ifndef __MTD_MTD_H__
10 #define __MTD_MTD_H__
11
12 #ifndef __KERNEL__
13 #error This is a kernel header. Perhaps include mtd-user.h instead?
14 #endif
15
16 #include <linux/config.h>
17 #include <linux/version.h>
18 #include <linux/types.h>
19 #include <linux/module.h>
20 #include <linux/uio.h>
21
22 #include <linux/mtd/compatmac.h>
23 #include <mtd/mtd-abi.h>
24
25 #define MTD_CHAR_MAJOR 90
26 #define MTD_BLOCK_MAJOR 31
27 #define MAX_MTD_DEVICES 16
28
29 #define MTD_ERASE_PENDING 0x01
30 #define MTD_ERASING 0x02
31 #define MTD_ERASE_SUSPEND 0x04
32 #define MTD_ERASE_DONE 0x08
33 #define MTD_ERASE_FAILED 0x10
34
35 /* If the erase fails, fail_addr might indicate exactly which block failed. If
36 fail_addr = 0xffffffff, the failure was not at the device level or was not
37 specific to any particular block. */
38 struct erase_info {
39 struct mtd_info *mtd;
40 u_int32_t addr;
41 u_int32_t len;
42 u_int32_t fail_addr;
43 u_long time;
44 u_long retries;
45 u_int dev;
46 u_int cell;
47 void (*callback) (struct erase_info *self);
48 u_long priv;
49 u_char state;
50 struct erase_info *next;
51 };
52
53 struct mtd_erase_region_info {
54 u_int32_t offset; /* At which this region starts, from the beginning of the MTD */
55 u_int32_t erasesize; /* For this region */
56 u_int32_t numblocks; /* Number of blocks of erasesize in this region */
57 };
58
59 struct mtd_info {
60 u_char type;
61 u_int32_t flags;
62 u_int32_t size; // Total size of the MTD
63
64 /* "Major" erase size for the device. Naïve users may take this
65 * to be the only erase size available, or may use the more detailed
66 * information below if they desire
67 */
68 u_int32_t erasesize;
69
70 u_int32_t oobblock; // Size of OOB blocks (e.g. 512)
71 u_int32_t oobsize; // Amount of OOB data per block (e.g. 16)
72 u_int32_t oobavail; // Number of bytes in OOB area available for fs
73 u_int32_t ecctype;
74 u_int32_t eccsize;
75
76
77 // Kernel-only stuff starts here.
78 char *name;
79 int index;
80
81 // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO)
82 struct nand_oobinfo oobinfo;
83
84 /* Data for variable erase regions. If numeraseregions is zero,
85 * it means that the whole device has erasesize as given above.
86 */
87 int numeraseregions;
88 struct mtd_erase_region_info *eraseregions;
89
90 /* This really shouldn't be here. It can go away in 2.5 */
91 u_int32_t bank_size;
92
93 int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
94
95 /* This stuff for eXecute-In-Place */
96 int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf);
97
98 /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
99 void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len);
100
101
102 int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
103 int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
104
105 int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
106 int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
107
108 int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
109 int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
110
111 /*
112 * Methods to access the protection register area, present in some
113 * flash devices. The user data is one time programmable but the
114 * factory data is read only.
115 */
116 int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
117
118 int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
119
120 /* This function is not yet implemented */
121 int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
122
123 /* kvec-based read/write methods. We need these especially for NAND flash,
124 with its limited number of write cycles per erase.
125 NB: The 'count' parameter is the number of _vectors_, each of
126 which contains an (ofs, len) tuple.
127 */
128 int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen);
129 int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from,
130 size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
131 int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
132 int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to,
133 size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel);
134
135 /* Sync */
136 void (*sync) (struct mtd_info *mtd);
137
138 /* Chip-supported device locking */
139 int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len);
140 int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len);
141
142 /* Power Management functions */
143 int (*suspend) (struct mtd_info *mtd);
144 void (*resume) (struct mtd_info *mtd);
145
146 /* Bad block management functions */
147 int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
148 int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
149
150 void *priv;
151
152 struct module *owner;
153 int usecount;
154 };
155
156
157 /* Kernel-side ioctl definitions */
158
159 extern int add_mtd_device(struct mtd_info *mtd);
160 extern int del_mtd_device (struct mtd_info *mtd);
161
162 extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num);
163
164 extern void put_mtd_device(struct mtd_info *mtd);
165
166
167 struct mtd_notifier {
168 void (*add)(struct mtd_info *mtd);
169 void (*remove)(struct mtd_info *mtd);
170 struct list_head list;
171 };
172
173
174 extern void register_mtd_user (struct mtd_notifier *new);
175 extern int unregister_mtd_user (struct mtd_notifier *old);
176
177 int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
178 unsigned long count, loff_t to, size_t *retlen);
179
180 int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
181 unsigned long count, loff_t from, size_t *retlen);
182
183 #define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args)
184 #define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d))
185 #define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg)
186 #define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args)
187 #define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args)
188 #define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args)
189 #define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args)
190 #define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args)
191 #define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args)
192 #define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args)
193 #define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args)
194 #define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0)
195
196
197 #ifdef CONFIG_MTD_PARTITIONS
198 void mtd_erase_callback(struct erase_info *instr);
199 #else
200 static inline void mtd_erase_callback(struct erase_info *instr)
201 {
202 if (instr->callback)
203 instr->callback(instr);
204 }
205 #endif
206
207 /*
208 * Debugging macro and defines
209 */
210 #define MTD_DEBUG_LEVEL0 (0) /* Quiet */
211 #define MTD_DEBUG_LEVEL1 (1) /* Audible */
212 #define MTD_DEBUG_LEVEL2 (2) /* Loud */
213 #define MTD_DEBUG_LEVEL3 (3) /* Noisy */
214
215 #ifdef CONFIG_MTD_DEBUG
216 #define DEBUG(n, args...) \
217 do { \
218 if (n <= CONFIG_MTD_DEBUG_VERBOSE) \
219 printk(KERN_INFO args); \
220 } while(0)
221 #else /* CONFIG_MTD_DEBUG */
222 #define DEBUG(n, args...) do { } while(0)
223
224 #endif /* CONFIG_MTD_DEBUG */
225
226 #endif /* __MTD_MTD_H__ */
This page took 0.041002 seconds and 5 git commands to generate.