2 * Framework and drivers for configuring and reading different PHYs
3 * Based on code in sungem_phy.c and gianfar_phy.c
7 * Copyright (c) 2004 Freescale Semiconductor, Inc.
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
19 #include <linux/spinlock.h>
20 #include <linux/ethtool.h>
21 #include <linux/mii.h>
22 #include <linux/timer.h>
23 #include <linux/workqueue.h>
24 #include <linux/mod_devicetable.h>
26 #include <linux/atomic.h>
28 #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \
32 #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \
33 SUPPORTED_10baseT_Full)
35 #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \
36 SUPPORTED_100baseT_Full)
38 #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \
39 SUPPORTED_1000baseT_Full)
41 #define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \
42 PHY_100BT_FEATURES | \
45 #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
50 * Set phydev->irq to PHY_POLL if interrupts are not supported,
51 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
52 * the attached driver handles the interrupt
55 #define PHY_IGNORE_INTERRUPT -2
57 #define PHY_HAS_INTERRUPT 0x00000001
58 #define PHY_HAS_MAGICANEG 0x00000002
59 #define PHY_IS_INTERNAL 0x00000004
61 /* Interface Mode definitions */
63 PHY_INTERFACE_MODE_NA
,
64 PHY_INTERFACE_MODE_MII
,
65 PHY_INTERFACE_MODE_GMII
,
66 PHY_INTERFACE_MODE_SGMII
,
67 PHY_INTERFACE_MODE_TBI
,
68 PHY_INTERFACE_MODE_REVMII
,
69 PHY_INTERFACE_MODE_RMII
,
70 PHY_INTERFACE_MODE_RGMII
,
71 PHY_INTERFACE_MODE_RGMII_ID
,
72 PHY_INTERFACE_MODE_RGMII_RXID
,
73 PHY_INTERFACE_MODE_RGMII_TXID
,
74 PHY_INTERFACE_MODE_RTBI
,
75 PHY_INTERFACE_MODE_SMII
,
76 PHY_INTERFACE_MODE_XGMII
,
77 PHY_INTERFACE_MODE_MOCA
,
78 PHY_INTERFACE_MODE_QSGMII
,
79 PHY_INTERFACE_MODE_MAX
,
83 * It maps 'enum phy_interface_t' found in include/linux/phy.h
84 * into the device tree binding of 'phy-mode', so that Ethernet
85 * device driver can get phy interface from device tree.
87 static inline const char *phy_modes(phy_interface_t interface
)
90 case PHY_INTERFACE_MODE_NA
:
92 case PHY_INTERFACE_MODE_MII
:
94 case PHY_INTERFACE_MODE_GMII
:
96 case PHY_INTERFACE_MODE_SGMII
:
98 case PHY_INTERFACE_MODE_TBI
:
100 case PHY_INTERFACE_MODE_REVMII
:
102 case PHY_INTERFACE_MODE_RMII
:
104 case PHY_INTERFACE_MODE_RGMII
:
106 case PHY_INTERFACE_MODE_RGMII_ID
:
108 case PHY_INTERFACE_MODE_RGMII_RXID
:
110 case PHY_INTERFACE_MODE_RGMII_TXID
:
112 case PHY_INTERFACE_MODE_RTBI
:
114 case PHY_INTERFACE_MODE_SMII
:
116 case PHY_INTERFACE_MODE_XGMII
:
118 case PHY_INTERFACE_MODE_MOCA
:
120 case PHY_INTERFACE_MODE_QSGMII
:
128 #define PHY_INIT_TIMEOUT 100000
129 #define PHY_STATE_TIME 1
130 #define PHY_FORCE_TIMEOUT 10
131 #define PHY_AN_TIMEOUT 10
133 #define PHY_MAX_ADDR 32
135 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */
136 #define PHY_ID_FMT "%s:%02x"
139 * Need to be a little smaller than phydev->dev.bus_id to leave room
142 #define MII_BUS_ID_SIZE (20 - 3)
144 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
145 IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
146 #define MII_ADDR_C45 (1<<30)
152 * The Bus class for PHYs. Devices which provide access to
153 * PHYs should register using this structure
157 char id
[MII_BUS_ID_SIZE
];
159 int (*read
)(struct mii_bus
*bus
, int phy_id
, int regnum
);
160 int (*write
)(struct mii_bus
*bus
, int phy_id
, int regnum
, u16 val
);
161 int (*reset
)(struct mii_bus
*bus
);
164 * A lock to ensure that only one thing can read/write
165 * the MDIO bus at a time
167 struct mutex mdio_lock
;
169 struct device
*parent
;
171 MDIOBUS_ALLOCATED
= 1,
173 MDIOBUS_UNREGISTERED
,
178 /* list of all PHYs on bus */
179 struct phy_device
*phy_map
[PHY_MAX_ADDR
];
181 /* PHY addresses to be ignored when probing */
185 * Pointer to an array of interrupts, each PHY's
186 * interrupt at the index matching its address
190 #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
192 struct mii_bus
*mdiobus_alloc_size(size_t);
193 static inline struct mii_bus
*mdiobus_alloc(void)
195 return mdiobus_alloc_size(0);
198 int mdiobus_register(struct mii_bus
*bus
);
199 void mdiobus_unregister(struct mii_bus
*bus
);
200 void mdiobus_free(struct mii_bus
*bus
);
201 struct mii_bus
*devm_mdiobus_alloc_size(struct device
*dev
, int sizeof_priv
);
202 static inline struct mii_bus
*devm_mdiobus_alloc(struct device
*dev
)
204 return devm_mdiobus_alloc_size(dev
, 0);
207 void devm_mdiobus_free(struct device
*dev
, struct mii_bus
*bus
);
208 struct phy_device
*mdiobus_scan(struct mii_bus
*bus
, int addr
);
209 int mdiobus_read(struct mii_bus
*bus
, int addr
, u32 regnum
);
210 int mdiobus_write(struct mii_bus
*bus
, int addr
, u32 regnum
, u16 val
);
213 #define PHY_INTERRUPT_DISABLED 0x0
214 #define PHY_INTERRUPT_ENABLED 0x80000000
216 /* PHY state machine states:
218 * DOWN: PHY device and driver are not ready for anything. probe
219 * should be called if and only if the PHY is in this state,
220 * given that the PHY device exists.
221 * - PHY driver probe function will, depending on the PHY, set
222 * the state to STARTING or READY
224 * STARTING: PHY device is coming up, and the ethernet driver is
225 * not ready. PHY drivers may set this in the probe function.
226 * If they do, they are responsible for making sure the state is
227 * eventually set to indicate whether the PHY is UP or READY,
228 * depending on the state when the PHY is done starting up.
229 * - PHY driver will set the state to READY
230 * - start will set the state to PENDING
232 * READY: PHY is ready to send and receive packets, but the
233 * controller is not. By default, PHYs which do not implement
234 * probe will be set to this state by phy_probe(). If the PHY
235 * driver knows the PHY is ready, and the PHY state is STARTING,
236 * then it sets this STATE.
237 * - start will set the state to UP
239 * PENDING: PHY device is coming up, but the ethernet driver is
240 * ready. phy_start will set this state if the PHY state is
242 * - PHY driver will set the state to UP when the PHY is ready
244 * UP: The PHY and attached device are ready to do work.
245 * Interrupts should be started here.
246 * - timer moves to AN
248 * AN: The PHY is currently negotiating the link state. Link is
249 * therefore down for now. phy_timer will set this state when it
250 * detects the state is UP. config_aneg will set this state
251 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
252 * - If autonegotiation finishes, but there's no link, it sets
253 * the state to NOLINK.
254 * - If aneg finishes with link, it sets the state to RUNNING,
255 * and calls adjust_link
256 * - If autonegotiation did not finish after an arbitrary amount
257 * of time, autonegotiation should be tried again if the PHY
258 * supports "magic" autonegotiation (back to AN)
259 * - If it didn't finish, and no magic_aneg, move to FORCING.
261 * NOLINK: PHY is up, but not currently plugged in.
262 * - If the timer notes that the link comes back, we move to RUNNING
263 * - config_aneg moves to AN
264 * - phy_stop moves to HALTED
266 * FORCING: PHY is being configured with forced settings
267 * - if link is up, move to RUNNING
268 * - If link is down, we drop to the next highest setting, and
269 * retry (FORCING) after a timeout
270 * - phy_stop moves to HALTED
272 * RUNNING: PHY is currently up, running, and possibly sending
273 * and/or receiving packets
274 * - timer will set CHANGELINK if we're polling (this ensures the
275 * link state is polled every other cycle of this state machine,
276 * which makes it every other second)
277 * - irq will set CHANGELINK
278 * - config_aneg will set AN
279 * - phy_stop moves to HALTED
281 * CHANGELINK: PHY experienced a change in link state
282 * - timer moves to RUNNING if link
283 * - timer moves to NOLINK if the link is down
284 * - phy_stop moves to HALTED
286 * HALTED: PHY is up, but no polling or interrupts are done. Or
287 * PHY is in an error state.
289 * - phy_start moves to RESUMING
291 * RESUMING: PHY was halted, but now wants to run again.
292 * - If we are forcing, or aneg is done, timer moves to RUNNING
293 * - If aneg is not done, timer moves to AN
294 * - phy_stop moves to HALTED
312 * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
313 * @devices_in_package: Bit vector of devices present.
314 * @device_ids: The device identifer for each present device.
316 struct phy_c45_device_ids
{
317 u32 devices_in_package
;
321 /* phy_device: An instance of a PHY
323 * drv: Pointer to the driver for this PHY instance
324 * bus: Pointer to the bus this PHY is on
325 * dev: driver model device structure for this PHY
326 * phy_id: UID for this device found during discovery
327 * c45_ids: 802.3-c45 Device Identifers if is_c45.
328 * is_c45: Set to true if this phy uses clause 45 addressing.
329 * is_internal: Set to true if this phy is internal to a MAC.
330 * state: state of the PHY for management purposes
331 * dev_flags: Device-specific flags used by the PHY driver.
332 * addr: Bus address of PHY
333 * link_timeout: The number of timer firings to wait before the
334 * giving up on the current attempt at acquiring a link
335 * irq: IRQ number of the PHY's interrupt (-1 if none)
336 * phy_timer: The timer for handling the state machine
337 * phy_queue: A work_queue for the interrupt
338 * attached_dev: The attached enet driver's device instance ptr
339 * adjust_link: Callback for the enet controller to respond to
340 * changes in the link state.
342 * speed, duplex, pause, supported, advertising, lp_advertising,
343 * and autoneg are used like in mii_if_info
345 * interrupts currently only supports enabled or disabled,
346 * but could be changed in the future to support enabling
347 * and disabling specific interrupts
349 * Contains some infrastructure for polling and interrupt
350 * handling, as well as handling shifts in PHY hardware state
353 /* Information about the PHY type */
354 /* And management functions */
355 struct phy_driver
*drv
;
363 struct phy_c45_device_ids c45_ids
;
368 enum phy_state state
;
372 phy_interface_t interface
;
374 /* Bus address of the PHY (0-31) */
378 * forced speed & duplex (no autoneg)
379 * partner speed & duplex & pause (autoneg)
386 /* The most recently read link state */
389 /* Enabled Interrupts */
392 /* Union of PHY and Attached devices' supported modes */
393 /* See mii.h for more info */
403 * Interrupt number for this PHY
404 * -1 means no interrupt
408 /* private data pointer */
409 /* For use by PHYs to maintain extra state */
412 /* Interrupt and Polling infrastructure */
413 struct work_struct phy_queue
;
414 struct delayed_work state_queue
;
415 atomic_t irq_disable
;
419 struct net_device
*attached_dev
;
421 void (*adjust_link
)(struct net_device
*dev
);
423 #define to_phy_device(d) container_of(d, struct phy_device, dev)
425 /* struct phy_driver: Driver structure for a particular PHY type
427 * phy_id: The result of reading the UID registers of this PHY
428 * type, and ANDing them with the phy_id_mask. This driver
429 * only works for PHYs with IDs which match this field
430 * name: The friendly name of this PHY type
431 * phy_id_mask: Defines the important bits of the phy_id
432 * features: A list of features (speed, duplex, etc) supported
434 * flags: A bitfield defining certain other features this PHY
435 * supports (like interrupts)
436 * driver_data: static driver data
438 * The drivers must implement config_aneg and read_status. All
439 * other functions are optional. Note that none of these
440 * functions should be called from interrupt time. The goal is
441 * for the bus read/write functions to be able to block when the
442 * bus transaction is happening, and be freed up by an interrupt
443 * (The MPC85xx has this ability, though it is not currently
444 * supported in the driver).
449 unsigned int phy_id_mask
;
452 const void *driver_data
;
455 * Called to issue a PHY software reset
457 int (*soft_reset
)(struct phy_device
*phydev
);
460 * Called to initialize the PHY,
461 * including after a reset
463 int (*config_init
)(struct phy_device
*phydev
);
466 * Called during discovery. Used to set
467 * up device-specific structures, if any
469 int (*probe
)(struct phy_device
*phydev
);
471 /* PHY Power Management */
472 int (*suspend
)(struct phy_device
*phydev
);
473 int (*resume
)(struct phy_device
*phydev
);
476 * Configures the advertisement and resets
477 * autonegotiation if phydev->autoneg is on,
478 * forces the speed to the current settings in phydev
479 * if phydev->autoneg is off
481 int (*config_aneg
)(struct phy_device
*phydev
);
483 /* Determines the auto negotiation result */
484 int (*aneg_done
)(struct phy_device
*phydev
);
486 /* Determines the negotiated speed and duplex */
487 int (*read_status
)(struct phy_device
*phydev
);
489 /* Clears any pending interrupts */
490 int (*ack_interrupt
)(struct phy_device
*phydev
);
492 /* Enables or disables interrupts */
493 int (*config_intr
)(struct phy_device
*phydev
);
496 * Checks if the PHY generated an interrupt.
497 * For multi-PHY devices with shared PHY interrupt pin
499 int (*did_interrupt
)(struct phy_device
*phydev
);
501 /* Clears up any memory if needed */
502 void (*remove
)(struct phy_device
*phydev
);
504 /* Returns true if this is a suitable driver for the given
505 * phydev. If NULL, matching is based on phy_id and
508 int (*match_phy_device
)(struct phy_device
*phydev
);
510 /* Handles ethtool queries for hardware time stamping. */
511 int (*ts_info
)(struct phy_device
*phydev
, struct ethtool_ts_info
*ti
);
513 /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
514 int (*hwtstamp
)(struct phy_device
*phydev
, struct ifreq
*ifr
);
517 * Requests a Rx timestamp for 'skb'. If the skb is accepted,
518 * the phy driver promises to deliver it using netif_rx() as
519 * soon as a timestamp becomes available. One of the
520 * PTP_CLASS_ values is passed in 'type'. The function must
521 * return true if the skb is accepted for delivery.
523 bool (*rxtstamp
)(struct phy_device
*dev
, struct sk_buff
*skb
, int type
);
526 * Requests a Tx timestamp for 'skb'. The phy driver promises
527 * to deliver it using skb_complete_tx_timestamp() as soon as a
528 * timestamp becomes available. One of the PTP_CLASS_ values
529 * is passed in 'type'.
531 void (*txtstamp
)(struct phy_device
*dev
, struct sk_buff
*skb
, int type
);
533 /* Some devices (e.g. qnap TS-119P II) require PHY register changes to
534 * enable Wake on LAN, so set_wol is provided to be called in the
535 * ethernet driver's set_wol function. */
536 int (*set_wol
)(struct phy_device
*dev
, struct ethtool_wolinfo
*wol
);
538 /* See set_wol, but for checking whether Wake on LAN is enabled. */
539 void (*get_wol
)(struct phy_device
*dev
, struct ethtool_wolinfo
*wol
);
542 * Called to inform a PHY device driver when the core is about to
543 * change the link state. This callback is supposed to be used as
544 * fixup hook for drivers that need to take action when the link
545 * state changes. Drivers are by no means allowed to mess with the
546 * PHY device structure in their implementations.
548 void (*link_change_notify
)(struct phy_device
*dev
);
550 /* A function provided by a phy specific driver to override the
551 * the PHY driver framework support for reading a MMD register
552 * from the PHY. If not supported, return -1. This function is
553 * optional for PHY specific drivers, if not provided then the
554 * default MMD read function is used by the PHY framework.
556 int (*read_mmd_indirect
)(struct phy_device
*dev
, int ptrad
,
557 int devnum
, int regnum
);
559 /* A function provided by a phy specific driver to override the
560 * the PHY driver framework support for writing a MMD register
561 * from the PHY. This function is optional for PHY specific drivers,
562 * if not provided then the default MMD read function is used by
565 void (*write_mmd_indirect
)(struct phy_device
*dev
, int ptrad
,
566 int devnum
, int regnum
, u32 val
);
568 struct device_driver driver
;
570 #define to_phy_driver(d) container_of(d, struct phy_driver, driver)
572 #define PHY_ANY_ID "MATCH ANY PHY"
573 #define PHY_ANY_UID 0xffffffff
575 /* A Structure for boards to register fixups with the PHY Lib */
577 struct list_head list
;
581 int (*run
)(struct phy_device
*phydev
);
585 * phy_read_mmd - Convenience function for reading a register
586 * from an MMD on a given PHY.
587 * @phydev: The phy_device struct
588 * @devad: The MMD to read from
589 * @regnum: The register on the MMD to read
591 * Same rules as for phy_read();
593 static inline int phy_read_mmd(struct phy_device
*phydev
, int devad
, u32 regnum
)
598 return mdiobus_read(phydev
->bus
, phydev
->addr
,
599 MII_ADDR_C45
| (devad
<< 16) | (regnum
& 0xffff));
603 * phy_read_mmd_indirect - reads data from the MMD registers
604 * @phydev: The PHY device bus
605 * @prtad: MMD Address
607 * @addr: PHY address on the MII bus
609 * Description: it reads data from the MMD registers (clause 22 to access to
610 * clause 45) of the specified phy address.
612 int phy_read_mmd_indirect(struct phy_device
*phydev
, int prtad
,
613 int devad
, int addr
);
616 * phy_read - Convenience function for reading a given PHY register
617 * @phydev: the phy_device struct
618 * @regnum: register number to read
620 * NOTE: MUST NOT be called from interrupt context,
621 * because the bus read/write functions may wait for an interrupt
622 * to conclude the operation.
624 static inline int phy_read(struct phy_device
*phydev
, u32 regnum
)
626 return mdiobus_read(phydev
->bus
, phydev
->addr
, regnum
);
630 * phy_write - Convenience function for writing a given PHY register
631 * @phydev: the phy_device struct
632 * @regnum: register number to write
633 * @val: value to write to @regnum
635 * NOTE: MUST NOT be called from interrupt context,
636 * because the bus read/write functions may wait for an interrupt
637 * to conclude the operation.
639 static inline int phy_write(struct phy_device
*phydev
, u32 regnum
, u16 val
)
641 return mdiobus_write(phydev
->bus
, phydev
->addr
, regnum
, val
);
645 * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
646 * @phydev: the phy_device struct
648 * NOTE: must be kept in sync with addition/removal of PHY_POLL and
649 * PHY_IGNORE_INTERRUPT
651 static inline bool phy_interrupt_is_valid(struct phy_device
*phydev
)
653 return phydev
->irq
!= PHY_POLL
&& phydev
->irq
!= PHY_IGNORE_INTERRUPT
;
657 * phy_is_internal - Convenience function for testing if a PHY is internal
658 * @phydev: the phy_device struct
660 static inline bool phy_is_internal(struct phy_device
*phydev
)
662 return phydev
->is_internal
;
666 * phy_write_mmd - Convenience function for writing a register
667 * on an MMD on a given PHY.
668 * @phydev: The phy_device struct
669 * @devad: The MMD to read from
670 * @regnum: The register on the MMD to read
671 * @val: value to write to @regnum
673 * Same rules as for phy_write();
675 static inline int phy_write_mmd(struct phy_device
*phydev
, int devad
,
681 regnum
= MII_ADDR_C45
| ((devad
& 0x1f) << 16) | (regnum
& 0xffff);
683 return mdiobus_write(phydev
->bus
, phydev
->addr
, regnum
, val
);
687 * phy_write_mmd_indirect - writes data to the MMD registers
688 * @phydev: The PHY device
689 * @prtad: MMD Address
691 * @addr: PHY address on the MII bus
692 * @data: data to write in the MMD register
694 * Description: Write data from the MMD registers of the specified
697 void phy_write_mmd_indirect(struct phy_device
*phydev
, int prtad
,
698 int devad
, int addr
, u32 data
);
700 struct phy_device
*phy_device_create(struct mii_bus
*bus
, int addr
, int phy_id
,
702 struct phy_c45_device_ids
*c45_ids
);
703 struct phy_device
*get_phy_device(struct mii_bus
*bus
, int addr
, bool is_c45
);
704 int phy_device_register(struct phy_device
*phy
);
705 int phy_init_hw(struct phy_device
*phydev
);
706 int phy_suspend(struct phy_device
*phydev
);
707 int phy_resume(struct phy_device
*phydev
);
708 struct phy_device
*phy_attach(struct net_device
*dev
, const char *bus_id
,
709 phy_interface_t interface
);
710 struct phy_device
*phy_find_first(struct mii_bus
*bus
);
711 int phy_attach_direct(struct net_device
*dev
, struct phy_device
*phydev
,
712 u32 flags
, phy_interface_t interface
);
713 int phy_connect_direct(struct net_device
*dev
, struct phy_device
*phydev
,
714 void (*handler
)(struct net_device
*),
715 phy_interface_t interface
);
716 struct phy_device
*phy_connect(struct net_device
*dev
, const char *bus_id
,
717 void (*handler
)(struct net_device
*),
718 phy_interface_t interface
);
719 void phy_disconnect(struct phy_device
*phydev
);
720 void phy_detach(struct phy_device
*phydev
);
721 void phy_start(struct phy_device
*phydev
);
722 void phy_stop(struct phy_device
*phydev
);
723 int phy_start_aneg(struct phy_device
*phydev
);
725 int phy_stop_interrupts(struct phy_device
*phydev
);
727 static inline int phy_read_status(struct phy_device
*phydev
)
729 return phydev
->drv
->read_status(phydev
);
732 int genphy_config_init(struct phy_device
*phydev
);
733 int genphy_setup_forced(struct phy_device
*phydev
);
734 int genphy_restart_aneg(struct phy_device
*phydev
);
735 int genphy_config_aneg(struct phy_device
*phydev
);
736 int genphy_aneg_done(struct phy_device
*phydev
);
737 int genphy_update_link(struct phy_device
*phydev
);
738 int genphy_read_status(struct phy_device
*phydev
);
739 int genphy_suspend(struct phy_device
*phydev
);
740 int genphy_resume(struct phy_device
*phydev
);
741 int genphy_soft_reset(struct phy_device
*phydev
);
742 void phy_driver_unregister(struct phy_driver
*drv
);
743 void phy_drivers_unregister(struct phy_driver
*drv
, int n
);
744 int phy_driver_register(struct phy_driver
*new_driver
);
745 int phy_drivers_register(struct phy_driver
*new_driver
, int n
);
746 void phy_state_machine(struct work_struct
*work
);
747 void phy_change(struct work_struct
*work
);
748 void phy_mac_interrupt(struct phy_device
*phydev
, int new_link
);
749 void phy_start_machine(struct phy_device
*phydev
);
750 void phy_stop_machine(struct phy_device
*phydev
);
751 int phy_ethtool_sset(struct phy_device
*phydev
, struct ethtool_cmd
*cmd
);
752 int phy_ethtool_gset(struct phy_device
*phydev
, struct ethtool_cmd
*cmd
);
753 int phy_mii_ioctl(struct phy_device
*phydev
, struct ifreq
*ifr
, int cmd
);
754 int phy_start_interrupts(struct phy_device
*phydev
);
755 void phy_print_status(struct phy_device
*phydev
);
756 void phy_device_free(struct phy_device
*phydev
);
758 int phy_register_fixup(const char *bus_id
, u32 phy_uid
, u32 phy_uid_mask
,
759 int (*run
)(struct phy_device
*));
760 int phy_register_fixup_for_id(const char *bus_id
,
761 int (*run
)(struct phy_device
*));
762 int phy_register_fixup_for_uid(u32 phy_uid
, u32 phy_uid_mask
,
763 int (*run
)(struct phy_device
*));
765 int phy_init_eee(struct phy_device
*phydev
, bool clk_stop_enable
);
766 int phy_get_eee_err(struct phy_device
*phydev
);
767 int phy_ethtool_set_eee(struct phy_device
*phydev
, struct ethtool_eee
*data
);
768 int phy_ethtool_get_eee(struct phy_device
*phydev
, struct ethtool_eee
*data
);
769 int phy_ethtool_set_wol(struct phy_device
*phydev
, struct ethtool_wolinfo
*wol
);
770 void phy_ethtool_get_wol(struct phy_device
*phydev
,
771 struct ethtool_wolinfo
*wol
);
773 int __init
mdio_bus_init(void);
774 void mdio_bus_exit(void);
776 extern struct bus_type mdio_bus_type
;
779 * module_phy_driver() - Helper macro for registering PHY drivers
780 * @__phy_drivers: array of PHY drivers to register
782 * Helper macro for PHY drivers which do not do anything special in module
783 * init/exit. Each module may only use this macro once, and calling it
784 * replaces module_init() and module_exit().
786 #define phy_module_driver(__phy_drivers, __count) \
787 static int __init phy_module_init(void) \
789 return phy_drivers_register(__phy_drivers, __count); \
791 module_init(phy_module_init); \
792 static void __exit phy_module_exit(void) \
794 phy_drivers_unregister(__phy_drivers, __count); \
796 module_exit(phy_module_exit)
798 #define module_phy_driver(__phy_drivers) \
799 phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers))