2 * linux/drivers/char/serial_core.h
4 * Copyright (C) 2000 Deep Blue Solutions Ltd.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 #ifndef LINUX_SERIAL_CORE_H
21 #define LINUX_SERIAL_CORE_H
23 #include <linux/serial.h>
26 * The type definitions. These are from Ted Ts'o's serial.h
28 #define PORT_UNKNOWN 0
35 #define PORT_16650V2 7
37 #define PORT_STARTECH 9
38 #define PORT_16C950 10
42 #define PORT_NS16550A 14
43 #define PORT_XSCALE 15
44 #define PORT_RM9000 16 /* PMC-Sierra RM9xxx internal UART */
45 #define PORT_OCTEON 17 /* Cavium OCTEON internal UART */
46 #define PORT_AR7 18 /* Texas Instruments AR7 internal UART */
47 #define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */
48 #define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */
49 #define PORT_XR17D15X 21 /* Exar XR17D15x UART */
50 #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */
51 #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */
52 #define PORT_MAX_8250 23 /* max port ID */
55 * ARM specific type numbers. These are not currently guaranteed
56 * to be implemented, and will change in the future. These are
57 * separate so any additions to the old serial.c that occur before
58 * we are merged can be easily merged here.
62 #define PORT_CLPS711X 33
63 #define PORT_SA1100 34
64 #define PORT_UART00 35
67 /* Sparc type numbers. */
68 #define PORT_SUNZILOG 38
69 #define PORT_SUNSAB 39
75 /* Parisc type numbers. */
78 /* Atmel AT91 / AT32 SoC */
81 /* Macintosh Zilog type numbers */
82 #define PORT_MAC_ZILOG 50 /* m68k : not yet implemented */
83 #define PORT_PMAC_ZILOG 51
90 /* Samsung S3C2410 SoC and derivatives thereof */
91 #define PORT_S3C2410 55
93 /* SGI IP22 aka Indy / Challenge S / Indigo 2 */
94 #define PORT_IP22ZILOG 56
96 /* Sharp LH7a40x -- an ARM9 SoC series */
97 #define PORT_LH7A40X 57
99 /* PPC CPM type number */
102 /* MPC52xx (and MPC512x) type numbers */
103 #define PORT_MPC52xx 59
108 /* Samsung S3C2440 SoC */
109 #define PORT_S3C2440 61
111 /* Motorola i.MX SoC */
117 /* TXX9 type number */
120 /* NEC VR4100 series SIU/DSIU */
121 #define PORT_VR41XX_SIU 65
122 #define PORT_VR41XX_DSIU 66
124 /* Samsung S3C2400 SoC */
125 #define PORT_S3C2400 67
128 #define PORT_M32R_SIO 68
133 #define PORT_PNX8XXX 70
138 /* SUN4V Hypervisor Console */
139 #define PORT_SUNHV 72
141 #define PORT_S3C2412 73
143 /* Xilinx uartlite */
144 #define PORT_UARTLITE 74
150 #define PORT_KS8695 76
152 /* Broadcom SB1250, etc. SOC */
153 #define PORT_SB1250_DUART 77
155 /* Freescale ColdFire */
159 #define PORT_BFIN_SPORT 79
161 /* MN10300 on-chip UART numbers */
162 #define PORT_MN10300 80
163 #define PORT_MN10300_CTS 81
165 #define PORT_SC26XX 82
168 #define PORT_SCIFA 83
170 #define PORT_S3C6400 84
173 #define PORT_NWPSERIAL 85
176 #define PORT_MAX3100 86
178 /* Timberdale UART */
179 #define PORT_TIMBUART 87
181 /* Qualcomm MSM SoCs */
184 /* BCM63xx family SoCs */
185 #define PORT_BCM63XX 89
187 /* Aeroflex Gaisler GRLIB APBUART */
188 #define PORT_APBUART 90
191 #define PORT_ALTERA_JTAGUART 91
192 #define PORT_ALTERA_UART 92
195 #define PORT_SCIFB 93
198 #define PORT_MAX310X 94
200 /* High Speed UART for Medfield */
207 #define PORT_VT8500 97
209 /* Xilinx PSS UART */
210 #define PORT_XUARTPS 98
212 /* Atheros AR933X SoC */
213 #define PORT_AR933X 99
215 /* Energy Micro efm32 SoC */
216 #define PORT_EFMUART 100
220 #include <linux/compiler.h>
221 #include <linux/interrupt.h>
222 #include <linux/circ_buf.h>
223 #include <linux/spinlock.h>
224 #include <linux/sched.h>
225 #include <linux/tty.h>
226 #include <linux/mutex.h>
227 #include <linux/sysrq.h>
228 #include <linux/pps_kernel.h>
231 struct serial_struct
;
235 * This structure describes all the operations that can be
236 * done on the physical hardware.
239 unsigned int (*tx_empty
)(struct uart_port
*);
240 void (*set_mctrl
)(struct uart_port
*, unsigned int mctrl
);
241 unsigned int (*get_mctrl
)(struct uart_port
*);
242 void (*stop_tx
)(struct uart_port
*);
243 void (*start_tx
)(struct uart_port
*);
244 void (*send_xchar
)(struct uart_port
*, char ch
);
245 void (*stop_rx
)(struct uart_port
*);
246 void (*enable_ms
)(struct uart_port
*);
247 void (*break_ctl
)(struct uart_port
*, int ctl
);
248 int (*startup
)(struct uart_port
*);
249 void (*shutdown
)(struct uart_port
*);
250 void (*flush_buffer
)(struct uart_port
*);
251 void (*set_termios
)(struct uart_port
*, struct ktermios
*new,
252 struct ktermios
*old
);
253 void (*set_ldisc
)(struct uart_port
*, int new);
254 void (*pm
)(struct uart_port
*, unsigned int state
,
255 unsigned int oldstate
);
256 int (*set_wake
)(struct uart_port
*, unsigned int state
);
259 * Return a string describing the type of the port
261 const char *(*type
)(struct uart_port
*);
264 * Release IO and memory resources used by the port.
265 * This includes iounmap if necessary.
267 void (*release_port
)(struct uart_port
*);
270 * Request IO and memory resources used by the port.
271 * This includes iomapping the port if necessary.
273 int (*request_port
)(struct uart_port
*);
274 void (*config_port
)(struct uart_port
*, int);
275 int (*verify_port
)(struct uart_port
*, struct serial_struct
*);
276 int (*ioctl
)(struct uart_port
*, unsigned int, unsigned long);
277 #ifdef CONFIG_CONSOLE_POLL
278 int (*poll_init
)(struct uart_port
*);
279 void (*poll_put_char
)(struct uart_port
*, unsigned char);
280 int (*poll_get_char
)(struct uart_port
*);
284 #define NO_POLL_CHAR 0x00ff0000
285 #define UART_CONFIG_TYPE (1 << 0)
286 #define UART_CONFIG_IRQ (1 << 1)
302 typedef unsigned int __bitwise__ upf_t
;
305 spinlock_t lock
; /* port lock */
306 unsigned long iobase
; /* in/out[bwl] */
307 unsigned char __iomem
*membase
; /* read/write[bwl] */
308 unsigned int (*serial_in
)(struct uart_port
*, int);
309 void (*serial_out
)(struct uart_port
*, int, int);
310 void (*set_termios
)(struct uart_port
*,
311 struct ktermios
*new,
312 struct ktermios
*old
);
313 int (*handle_irq
)(struct uart_port
*);
314 void (*pm
)(struct uart_port
*, unsigned int state
,
316 void (*handle_break
)(struct uart_port
*);
317 unsigned int irq
; /* irq number */
318 unsigned long irqflags
; /* irq flags */
319 unsigned int uartclk
; /* base uart clock */
320 unsigned int fifosize
; /* tx fifo size */
321 unsigned char x_char
; /* xon/xoff char */
322 unsigned char regshift
; /* reg offset shift */
323 unsigned char iotype
; /* io access style */
324 unsigned char unused1
;
326 #define UPIO_PORT (0)
327 #define UPIO_HUB6 (1)
329 #define UPIO_MEM32 (3)
330 #define UPIO_AU (4) /* Au1x00 type IO */
331 #define UPIO_TSI (5) /* Tsi108/109 type IO */
332 #define UPIO_RM9000 (6) /* RM9000 type IO */
334 unsigned int read_status_mask
; /* driver specific */
335 unsigned int ignore_status_mask
; /* driver specific */
336 struct uart_state
*state
; /* pointer to parent state */
337 struct uart_icount icount
; /* statistics */
339 struct console
*cons
; /* struct console, if any */
340 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(SUPPORT_SYSRQ)
341 unsigned long sysrq
; /* sysrq timeout */
346 #define UPF_FOURPORT ((__force upf_t) (1 << 1))
347 #define UPF_SAK ((__force upf_t) (1 << 2))
348 #define UPF_SPD_MASK ((__force upf_t) (0x1030))
349 #define UPF_SPD_HI ((__force upf_t) (0x0010))
350 #define UPF_SPD_VHI ((__force upf_t) (0x0020))
351 #define UPF_SPD_CUST ((__force upf_t) (0x0030))
352 #define UPF_SPD_SHI ((__force upf_t) (0x1000))
353 #define UPF_SPD_WARP ((__force upf_t) (0x1010))
354 #define UPF_SKIP_TEST ((__force upf_t) (1 << 6))
355 #define UPF_AUTO_IRQ ((__force upf_t) (1 << 7))
356 #define UPF_HARDPPS_CD ((__force upf_t) (1 << 11))
357 #define UPF_LOW_LATENCY ((__force upf_t) (1 << 13))
358 #define UPF_BUGGY_UART ((__force upf_t) (1 << 14))
359 #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15))
360 #define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16))
361 #define UPF_CONS_FLOW ((__force upf_t) (1 << 23))
362 #define UPF_SHARE_IRQ ((__force upf_t) (1 << 24))
363 #define UPF_EXAR_EFR ((__force upf_t) (1 << 25))
364 #define UPF_BUG_THRE ((__force upf_t) (1 << 26))
365 /* The exact UART type is known and should not be probed. */
366 #define UPF_FIXED_TYPE ((__force upf_t) (1 << 27))
367 #define UPF_BOOT_AUTOCONF ((__force upf_t) (1 << 28))
368 #define UPF_FIXED_PORT ((__force upf_t) (1 << 29))
369 #define UPF_DEAD ((__force upf_t) (1 << 30))
370 #define UPF_IOREMAP ((__force upf_t) (1 << 31))
372 #define UPF_CHANGE_MASK ((__force upf_t) (0x17fff))
373 #define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY))
375 unsigned int mctrl
; /* current modem ctrl settings */
376 unsigned int timeout
; /* character-based timeout */
377 unsigned int type
; /* port type */
378 const struct uart_ops
*ops
;
379 unsigned int custom_divisor
;
380 unsigned int line
; /* port index */
381 resource_size_t mapbase
; /* for ioremap */
382 struct device
*dev
; /* parent device */
383 unsigned char hub6
; /* this should be in the 8250 driver */
384 unsigned char suspended
;
385 unsigned char irq_wake
;
386 unsigned char unused
[2];
387 void *private_data
; /* generic platform data pointer */
390 static inline int serial_port_in(struct uart_port
*up
, int offset
)
392 return up
->serial_in(up
, offset
);
395 static inline void serial_port_out(struct uart_port
*up
, int offset
, int value
)
397 up
->serial_out(up
, offset
, value
);
401 * This is the state information which is persistent across opens.
404 struct tty_port port
;
407 struct circ_buf xmit
;
409 struct uart_port
*uart_port
;
412 #define UART_XMIT_SIZE PAGE_SIZE
415 /* number of characters left in xmit buffer before we ask for more */
416 #define WAKEUP_CHARS 256
422 struct module
*owner
;
423 const char *driver_name
;
424 const char *dev_name
;
428 struct console
*cons
;
431 * these are private; the low level driver should not
432 * touch these; they should be initialised to NULL
434 struct uart_state
*state
;
435 struct tty_driver
*tty_driver
;
438 void uart_write_wakeup(struct uart_port
*port
);
443 void uart_update_timeout(struct uart_port
*port
, unsigned int cflag
,
445 unsigned int uart_get_baud_rate(struct uart_port
*port
, struct ktermios
*termios
,
446 struct ktermios
*old
, unsigned int min
,
448 unsigned int uart_get_divisor(struct uart_port
*port
, unsigned int baud
);
450 /* Base timer interval for polling */
451 static inline int uart_poll_timeout(struct uart_port
*port
)
453 int timeout
= port
->timeout
;
455 return timeout
> 6 ? (timeout
/ 2 - 2) : 1;
461 struct uart_port
*uart_get_console(struct uart_port
*ports
, int nr
,
463 void uart_parse_options(char *options
, int *baud
, int *parity
, int *bits
,
465 int uart_set_options(struct uart_port
*port
, struct console
*co
, int baud
,
466 int parity
, int bits
, int flow
);
467 struct tty_driver
*uart_console_device(struct console
*co
, int *index
);
468 void uart_console_write(struct uart_port
*port
, const char *s
,
470 void (*putchar
)(struct uart_port
*, int));
473 * Port/driver registration/removal
475 int uart_register_driver(struct uart_driver
*uart
);
476 void uart_unregister_driver(struct uart_driver
*uart
);
477 int uart_add_one_port(struct uart_driver
*reg
, struct uart_port
*port
);
478 int uart_remove_one_port(struct uart_driver
*reg
, struct uart_port
*port
);
479 int uart_match_port(struct uart_port
*port1
, struct uart_port
*port2
);
484 int uart_suspend_port(struct uart_driver
*reg
, struct uart_port
*port
);
485 int uart_resume_port(struct uart_driver
*reg
, struct uart_port
*port
);
487 #define uart_circ_empty(circ) ((circ)->head == (circ)->tail)
488 #define uart_circ_clear(circ) ((circ)->head = (circ)->tail = 0)
490 #define uart_circ_chars_pending(circ) \
491 (CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
493 #define uart_circ_chars_free(circ) \
494 (CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
496 static inline int uart_tx_stopped(struct uart_port
*port
)
498 struct tty_struct
*tty
= port
->state
->port
.tty
;
499 if(tty
->stopped
|| tty
->hw_stopped
)
505 * The following are helper functions for the low level drivers.
508 extern void uart_handle_dcd_change(struct uart_port
*uport
,
509 unsigned int status
);
510 extern void uart_handle_cts_change(struct uart_port
*uport
,
511 unsigned int status
);
513 extern void uart_insert_char(struct uart_port
*port
, unsigned int status
,
514 unsigned int overrun
, unsigned int ch
, unsigned int flag
);
518 uart_handle_sysrq_char(struct uart_port
*port
, unsigned int ch
)
521 if (ch
&& time_before(jiffies
, port
->sysrq
)) {
531 #define uart_handle_sysrq_char(port,ch) ({ (void)port; 0; })
535 * We do the SysRQ and SAK checking like this...
537 static inline int uart_handle_break(struct uart_port
*port
)
539 struct uart_state
*state
= port
->state
;
541 if (port
->handle_break
)
542 port
->handle_break(port
);
545 if (port
->cons
&& port
->cons
->index
== port
->line
) {
547 port
->sysrq
= jiffies
+ HZ
*5;
553 if (port
->flags
& UPF_SAK
)
554 do_SAK(state
->port
.tty
);
559 * UART_ENABLE_MS - determine if port should enable modem status irqs
561 #define UART_ENABLE_MS(port,cflag) ((port)->flags & UPF_HARDPPS_CD || \
562 (cflag) & CRTSCTS || \
567 #endif /* LINUX_SERIAL_CORE_H */
This page took 0.042283 seconds and 5 git commands to generate.