3573ba9a255558e3be8ea6691103306861838fe2
[deliverable/linux.git] / include / linux / skbuff.h
1 /*
2 * Definitions for the 'struct sk_buff' memory handlers.
3 *
4 * Authors:
5 * Alan Cox, <gw4pts@gw4pts.ampr.org>
6 * Florian La Roche, <rzsfl@rz.uni-sb.de>
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * as published by the Free Software Foundation; either version
11 * 2 of the License, or (at your option) any later version.
12 */
13
14 #ifndef _LINUX_SKBUFF_H
15 #define _LINUX_SKBUFF_H
16
17 #include <linux/kernel.h>
18 #include <linux/compiler.h>
19 #include <linux/time.h>
20 #include <linux/cache.h>
21
22 #include <asm/atomic.h>
23 #include <asm/types.h>
24 #include <linux/spinlock.h>
25 #include <linux/mm.h>
26 #include <linux/highmem.h>
27 #include <linux/poll.h>
28 #include <linux/net.h>
29 #include <linux/textsearch.h>
30 #include <net/checksum.h>
31 #include <linux/dmaengine.h>
32
33 #define HAVE_ALLOC_SKB /* For the drivers to know */
34 #define HAVE_ALIGNABLE_SKB /* Ditto 8) */
35
36 #define CHECKSUM_NONE 0
37 #define CHECKSUM_HW 1
38 #define CHECKSUM_UNNECESSARY 2
39
40 #define SKB_DATA_ALIGN(X) (((X) + (SMP_CACHE_BYTES - 1)) & \
41 ~(SMP_CACHE_BYTES - 1))
42 #define SKB_MAX_ORDER(X, ORDER) (((PAGE_SIZE << (ORDER)) - (X) - \
43 sizeof(struct skb_shared_info)) & \
44 ~(SMP_CACHE_BYTES - 1))
45 #define SKB_MAX_HEAD(X) (SKB_MAX_ORDER((X), 0))
46 #define SKB_MAX_ALLOC (SKB_MAX_ORDER(0, 2))
47
48 /* A. Checksumming of received packets by device.
49 *
50 * NONE: device failed to checksum this packet.
51 * skb->csum is undefined.
52 *
53 * UNNECESSARY: device parsed packet and wouldbe verified checksum.
54 * skb->csum is undefined.
55 * It is bad option, but, unfortunately, many of vendors do this.
56 * Apparently with secret goal to sell you new device, when you
57 * will add new protocol to your host. F.e. IPv6. 8)
58 *
59 * HW: the most generic way. Device supplied checksum of _all_
60 * the packet as seen by netif_rx in skb->csum.
61 * NOTE: Even if device supports only some protocols, but
62 * is able to produce some skb->csum, it MUST use HW,
63 * not UNNECESSARY.
64 *
65 * B. Checksumming on output.
66 *
67 * NONE: skb is checksummed by protocol or csum is not required.
68 *
69 * HW: device is required to csum packet as seen by hard_start_xmit
70 * from skb->h.raw to the end and to record the checksum
71 * at skb->h.raw+skb->csum.
72 *
73 * Device must show its capabilities in dev->features, set
74 * at device setup time.
75 * NETIF_F_HW_CSUM - it is clever device, it is able to checksum
76 * everything.
77 * NETIF_F_NO_CSUM - loopback or reliable single hop media.
78 * NETIF_F_IP_CSUM - device is dumb. It is able to csum only
79 * TCP/UDP over IPv4. Sigh. Vendors like this
80 * way by an unknown reason. Though, see comment above
81 * about CHECKSUM_UNNECESSARY. 8)
82 *
83 * Any questions? No questions, good. --ANK
84 */
85
86 struct net_device;
87
88 #ifdef CONFIG_NETFILTER
89 struct nf_conntrack {
90 atomic_t use;
91 void (*destroy)(struct nf_conntrack *);
92 };
93
94 #ifdef CONFIG_BRIDGE_NETFILTER
95 struct nf_bridge_info {
96 atomic_t use;
97 struct net_device *physindev;
98 struct net_device *physoutdev;
99 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
100 struct net_device *netoutdev;
101 #endif
102 unsigned int mask;
103 unsigned long data[32 / sizeof(unsigned long)];
104 };
105 #endif
106
107 #endif
108
109 struct sk_buff_head {
110 /* These two members must be first. */
111 struct sk_buff *next;
112 struct sk_buff *prev;
113
114 __u32 qlen;
115 spinlock_t lock;
116 };
117
118 struct sk_buff;
119
120 /* To allow 64K frame to be packed as single skb without frag_list */
121 #define MAX_SKB_FRAGS (65536/PAGE_SIZE + 2)
122
123 typedef struct skb_frag_struct skb_frag_t;
124
125 struct skb_frag_struct {
126 struct page *page;
127 __u16 page_offset;
128 __u16 size;
129 };
130
131 /* This data is invariant across clones and lives at
132 * the end of the header data, ie. at skb->end.
133 */
134 struct skb_shared_info {
135 atomic_t dataref;
136 unsigned short nr_frags;
137 unsigned short gso_size;
138 /* Warning: this field is not always filled in (UFO)! */
139 unsigned short gso_segs;
140 unsigned short gso_type;
141 unsigned int ip6_frag_id;
142 struct sk_buff *frag_list;
143 skb_frag_t frags[MAX_SKB_FRAGS];
144 };
145
146 /* We divide dataref into two halves. The higher 16 bits hold references
147 * to the payload part of skb->data. The lower 16 bits hold references to
148 * the entire skb->data. It is up to the users of the skb to agree on
149 * where the payload starts.
150 *
151 * All users must obey the rule that the skb->data reference count must be
152 * greater than or equal to the payload reference count.
153 *
154 * Holding a reference to the payload part means that the user does not
155 * care about modifications to the header part of skb->data.
156 */
157 #define SKB_DATAREF_SHIFT 16
158 #define SKB_DATAREF_MASK ((1 << SKB_DATAREF_SHIFT) - 1)
159
160 struct skb_timeval {
161 u32 off_sec;
162 u32 off_usec;
163 };
164
165
166 enum {
167 SKB_FCLONE_UNAVAILABLE,
168 SKB_FCLONE_ORIG,
169 SKB_FCLONE_CLONE,
170 };
171
172 enum {
173 SKB_GSO_TCPV4 = 1 << 0,
174 SKB_GSO_UDP = 1 << 1,
175
176 /* This indicates the skb is from an untrusted source. */
177 SKB_GSO_DODGY = 1 << 2,
178
179 /* This indicates the tcp segment has CWR set. */
180 SKB_GSO_TCP_ECN = 1 << 3,
181
182 SKB_GSO_TCPV6 = 1 << 4,
183 };
184
185 /**
186 * struct sk_buff - socket buffer
187 * @next: Next buffer in list
188 * @prev: Previous buffer in list
189 * @sk: Socket we are owned by
190 * @tstamp: Time we arrived
191 * @dev: Device we arrived on/are leaving by
192 * @input_dev: Device we arrived on
193 * @h: Transport layer header
194 * @nh: Network layer header
195 * @mac: Link layer header
196 * @dst: destination entry
197 * @sp: the security path, used for xfrm
198 * @cb: Control buffer. Free for use by every layer. Put private vars here
199 * @len: Length of actual data
200 * @data_len: Data length
201 * @mac_len: Length of link layer header
202 * @csum: Checksum
203 * @local_df: allow local fragmentation
204 * @cloned: Head may be cloned (check refcnt to be sure)
205 * @nohdr: Payload reference only, must not modify header
206 * @pkt_type: Packet class
207 * @fclone: skbuff clone status
208 * @ip_summed: Driver fed us an IP checksum
209 * @priority: Packet queueing priority
210 * @users: User count - see {datagram,tcp}.c
211 * @protocol: Packet protocol from driver
212 * @truesize: Buffer size
213 * @head: Head of buffer
214 * @data: Data head pointer
215 * @tail: Tail pointer
216 * @end: End pointer
217 * @destructor: Destruct function
218 * @nfmark: Can be used for communication between hooks
219 * @nfct: Associated connection, if any
220 * @ipvs_property: skbuff is owned by ipvs
221 * @nfctinfo: Relationship of this skb to the connection
222 * @nfct_reasm: netfilter conntrack re-assembly pointer
223 * @nf_bridge: Saved data about a bridged frame - see br_netfilter.c
224 * @tc_index: Traffic control index
225 * @tc_verd: traffic control verdict
226 * @dma_cookie: a cookie to one of several possible DMA operations
227 * done by skb DMA functions
228 * @secmark: security marking
229 */
230
231 struct sk_buff {
232 /* These two members must be first. */
233 struct sk_buff *next;
234 struct sk_buff *prev;
235
236 struct sock *sk;
237 struct skb_timeval tstamp;
238 struct net_device *dev;
239 struct net_device *input_dev;
240
241 union {
242 struct tcphdr *th;
243 struct udphdr *uh;
244 struct icmphdr *icmph;
245 struct igmphdr *igmph;
246 struct iphdr *ipiph;
247 struct ipv6hdr *ipv6h;
248 unsigned char *raw;
249 } h;
250
251 union {
252 struct iphdr *iph;
253 struct ipv6hdr *ipv6h;
254 struct arphdr *arph;
255 unsigned char *raw;
256 } nh;
257
258 union {
259 unsigned char *raw;
260 } mac;
261
262 struct dst_entry *dst;
263 struct sec_path *sp;
264
265 /*
266 * This is the control buffer. It is free to use for every
267 * layer. Please put your private variables there. If you
268 * want to keep them across layers you have to do a skb_clone()
269 * first. This is owned by whoever has the skb queued ATM.
270 */
271 char cb[48];
272
273 unsigned int len,
274 data_len,
275 mac_len,
276 csum;
277 __u32 priority;
278 __u8 local_df:1,
279 cloned:1,
280 ip_summed:2,
281 nohdr:1,
282 nfctinfo:3;
283 __u8 pkt_type:3,
284 fclone:2,
285 ipvs_property:1;
286 __be16 protocol;
287
288 void (*destructor)(struct sk_buff *skb);
289 #ifdef CONFIG_NETFILTER
290 struct nf_conntrack *nfct;
291 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
292 struct sk_buff *nfct_reasm;
293 #endif
294 #ifdef CONFIG_BRIDGE_NETFILTER
295 struct nf_bridge_info *nf_bridge;
296 #endif
297 __u32 nfmark;
298 #endif /* CONFIG_NETFILTER */
299 #ifdef CONFIG_NET_SCHED
300 __u16 tc_index; /* traffic control index */
301 #ifdef CONFIG_NET_CLS_ACT
302 __u16 tc_verd; /* traffic control verdict */
303 #endif
304 #endif
305 #ifdef CONFIG_NET_DMA
306 dma_cookie_t dma_cookie;
307 #endif
308 #ifdef CONFIG_NETWORK_SECMARK
309 __u32 secmark;
310 #endif
311
312
313 /* These elements must be at the end, see alloc_skb() for details. */
314 unsigned int truesize;
315 atomic_t users;
316 unsigned char *head,
317 *data,
318 *tail,
319 *end;
320 };
321
322 #ifdef __KERNEL__
323 /*
324 * Handling routines are only of interest to the kernel
325 */
326 #include <linux/slab.h>
327
328 #include <asm/system.h>
329
330 extern void kfree_skb(struct sk_buff *skb);
331 extern void __kfree_skb(struct sk_buff *skb);
332 extern struct sk_buff *__alloc_skb(unsigned int size,
333 gfp_t priority, int fclone);
334 static inline struct sk_buff *alloc_skb(unsigned int size,
335 gfp_t priority)
336 {
337 return __alloc_skb(size, priority, 0);
338 }
339
340 static inline struct sk_buff *alloc_skb_fclone(unsigned int size,
341 gfp_t priority)
342 {
343 return __alloc_skb(size, priority, 1);
344 }
345
346 extern struct sk_buff *alloc_skb_from_cache(kmem_cache_t *cp,
347 unsigned int size,
348 gfp_t priority);
349 extern void kfree_skbmem(struct sk_buff *skb);
350 extern struct sk_buff *skb_clone(struct sk_buff *skb,
351 gfp_t priority);
352 extern struct sk_buff *skb_copy(const struct sk_buff *skb,
353 gfp_t priority);
354 extern struct sk_buff *pskb_copy(struct sk_buff *skb,
355 gfp_t gfp_mask);
356 extern int pskb_expand_head(struct sk_buff *skb,
357 int nhead, int ntail,
358 gfp_t gfp_mask);
359 extern struct sk_buff *skb_realloc_headroom(struct sk_buff *skb,
360 unsigned int headroom);
361 extern struct sk_buff *skb_copy_expand(const struct sk_buff *skb,
362 int newheadroom, int newtailroom,
363 gfp_t priority);
364 extern int skb_pad(struct sk_buff *skb, int pad);
365 #define dev_kfree_skb(a) kfree_skb(a)
366 extern void skb_over_panic(struct sk_buff *skb, int len,
367 void *here);
368 extern void skb_under_panic(struct sk_buff *skb, int len,
369 void *here);
370 extern void skb_truesize_bug(struct sk_buff *skb);
371
372 static inline void skb_truesize_check(struct sk_buff *skb)
373 {
374 if (unlikely((int)skb->truesize < sizeof(struct sk_buff) + skb->len))
375 skb_truesize_bug(skb);
376 }
377
378 extern int skb_append_datato_frags(struct sock *sk, struct sk_buff *skb,
379 int getfrag(void *from, char *to, int offset,
380 int len,int odd, struct sk_buff *skb),
381 void *from, int length);
382
383 struct skb_seq_state
384 {
385 __u32 lower_offset;
386 __u32 upper_offset;
387 __u32 frag_idx;
388 __u32 stepped_offset;
389 struct sk_buff *root_skb;
390 struct sk_buff *cur_skb;
391 __u8 *frag_data;
392 };
393
394 extern void skb_prepare_seq_read(struct sk_buff *skb,
395 unsigned int from, unsigned int to,
396 struct skb_seq_state *st);
397 extern unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
398 struct skb_seq_state *st);
399 extern void skb_abort_seq_read(struct skb_seq_state *st);
400
401 extern unsigned int skb_find_text(struct sk_buff *skb, unsigned int from,
402 unsigned int to, struct ts_config *config,
403 struct ts_state *state);
404
405 /* Internal */
406 #define skb_shinfo(SKB) ((struct skb_shared_info *)((SKB)->end))
407
408 /**
409 * skb_queue_empty - check if a queue is empty
410 * @list: queue head
411 *
412 * Returns true if the queue is empty, false otherwise.
413 */
414 static inline int skb_queue_empty(const struct sk_buff_head *list)
415 {
416 return list->next == (struct sk_buff *)list;
417 }
418
419 /**
420 * skb_get - reference buffer
421 * @skb: buffer to reference
422 *
423 * Makes another reference to a socket buffer and returns a pointer
424 * to the buffer.
425 */
426 static inline struct sk_buff *skb_get(struct sk_buff *skb)
427 {
428 atomic_inc(&skb->users);
429 return skb;
430 }
431
432 /*
433 * If users == 1, we are the only owner and are can avoid redundant
434 * atomic change.
435 */
436
437 /**
438 * skb_cloned - is the buffer a clone
439 * @skb: buffer to check
440 *
441 * Returns true if the buffer was generated with skb_clone() and is
442 * one of multiple shared copies of the buffer. Cloned buffers are
443 * shared data so must not be written to under normal circumstances.
444 */
445 static inline int skb_cloned(const struct sk_buff *skb)
446 {
447 return skb->cloned &&
448 (atomic_read(&skb_shinfo(skb)->dataref) & SKB_DATAREF_MASK) != 1;
449 }
450
451 /**
452 * skb_header_cloned - is the header a clone
453 * @skb: buffer to check
454 *
455 * Returns true if modifying the header part of the buffer requires
456 * the data to be copied.
457 */
458 static inline int skb_header_cloned(const struct sk_buff *skb)
459 {
460 int dataref;
461
462 if (!skb->cloned)
463 return 0;
464
465 dataref = atomic_read(&skb_shinfo(skb)->dataref);
466 dataref = (dataref & SKB_DATAREF_MASK) - (dataref >> SKB_DATAREF_SHIFT);
467 return dataref != 1;
468 }
469
470 /**
471 * skb_header_release - release reference to header
472 * @skb: buffer to operate on
473 *
474 * Drop a reference to the header part of the buffer. This is done
475 * by acquiring a payload reference. You must not read from the header
476 * part of skb->data after this.
477 */
478 static inline void skb_header_release(struct sk_buff *skb)
479 {
480 BUG_ON(skb->nohdr);
481 skb->nohdr = 1;
482 atomic_add(1 << SKB_DATAREF_SHIFT, &skb_shinfo(skb)->dataref);
483 }
484
485 /**
486 * skb_shared - is the buffer shared
487 * @skb: buffer to check
488 *
489 * Returns true if more than one person has a reference to this
490 * buffer.
491 */
492 static inline int skb_shared(const struct sk_buff *skb)
493 {
494 return atomic_read(&skb->users) != 1;
495 }
496
497 /**
498 * skb_share_check - check if buffer is shared and if so clone it
499 * @skb: buffer to check
500 * @pri: priority for memory allocation
501 *
502 * If the buffer is shared the buffer is cloned and the old copy
503 * drops a reference. A new clone with a single reference is returned.
504 * If the buffer is not shared the original buffer is returned. When
505 * being called from interrupt status or with spinlocks held pri must
506 * be GFP_ATOMIC.
507 *
508 * NULL is returned on a memory allocation failure.
509 */
510 static inline struct sk_buff *skb_share_check(struct sk_buff *skb,
511 gfp_t pri)
512 {
513 might_sleep_if(pri & __GFP_WAIT);
514 if (skb_shared(skb)) {
515 struct sk_buff *nskb = skb_clone(skb, pri);
516 kfree_skb(skb);
517 skb = nskb;
518 }
519 return skb;
520 }
521
522 /*
523 * Copy shared buffers into a new sk_buff. We effectively do COW on
524 * packets to handle cases where we have a local reader and forward
525 * and a couple of other messy ones. The normal one is tcpdumping
526 * a packet thats being forwarded.
527 */
528
529 /**
530 * skb_unshare - make a copy of a shared buffer
531 * @skb: buffer to check
532 * @pri: priority for memory allocation
533 *
534 * If the socket buffer is a clone then this function creates a new
535 * copy of the data, drops a reference count on the old copy and returns
536 * the new copy with the reference count at 1. If the buffer is not a clone
537 * the original buffer is returned. When called with a spinlock held or
538 * from interrupt state @pri must be %GFP_ATOMIC
539 *
540 * %NULL is returned on a memory allocation failure.
541 */
542 static inline struct sk_buff *skb_unshare(struct sk_buff *skb,
543 gfp_t pri)
544 {
545 might_sleep_if(pri & __GFP_WAIT);
546 if (skb_cloned(skb)) {
547 struct sk_buff *nskb = skb_copy(skb, pri);
548 kfree_skb(skb); /* Free our shared copy */
549 skb = nskb;
550 }
551 return skb;
552 }
553
554 /**
555 * skb_peek
556 * @list_: list to peek at
557 *
558 * Peek an &sk_buff. Unlike most other operations you _MUST_
559 * be careful with this one. A peek leaves the buffer on the
560 * list and someone else may run off with it. You must hold
561 * the appropriate locks or have a private queue to do this.
562 *
563 * Returns %NULL for an empty list or a pointer to the head element.
564 * The reference count is not incremented and the reference is therefore
565 * volatile. Use with caution.
566 */
567 static inline struct sk_buff *skb_peek(struct sk_buff_head *list_)
568 {
569 struct sk_buff *list = ((struct sk_buff *)list_)->next;
570 if (list == (struct sk_buff *)list_)
571 list = NULL;
572 return list;
573 }
574
575 /**
576 * skb_peek_tail
577 * @list_: list to peek at
578 *
579 * Peek an &sk_buff. Unlike most other operations you _MUST_
580 * be careful with this one. A peek leaves the buffer on the
581 * list and someone else may run off with it. You must hold
582 * the appropriate locks or have a private queue to do this.
583 *
584 * Returns %NULL for an empty list or a pointer to the tail element.
585 * The reference count is not incremented and the reference is therefore
586 * volatile. Use with caution.
587 */
588 static inline struct sk_buff *skb_peek_tail(struct sk_buff_head *list_)
589 {
590 struct sk_buff *list = ((struct sk_buff *)list_)->prev;
591 if (list == (struct sk_buff *)list_)
592 list = NULL;
593 return list;
594 }
595
596 /**
597 * skb_queue_len - get queue length
598 * @list_: list to measure
599 *
600 * Return the length of an &sk_buff queue.
601 */
602 static inline __u32 skb_queue_len(const struct sk_buff_head *list_)
603 {
604 return list_->qlen;
605 }
606
607 /*
608 * This function creates a split out lock class for each invocation;
609 * this is needed for now since a whole lot of users of the skb-queue
610 * infrastructure in drivers have different locking usage (in hardirq)
611 * than the networking core (in softirq only). In the long run either the
612 * network layer or drivers should need annotation to consolidate the
613 * main types of usage into 3 classes.
614 */
615 static inline void skb_queue_head_init(struct sk_buff_head *list)
616 {
617 spin_lock_init(&list->lock);
618 list->prev = list->next = (struct sk_buff *)list;
619 list->qlen = 0;
620 }
621
622 /*
623 * Insert an sk_buff at the start of a list.
624 *
625 * The "__skb_xxxx()" functions are the non-atomic ones that
626 * can only be called with interrupts disabled.
627 */
628
629 /**
630 * __skb_queue_after - queue a buffer at the list head
631 * @list: list to use
632 * @prev: place after this buffer
633 * @newsk: buffer to queue
634 *
635 * Queue a buffer int the middle of a list. This function takes no locks
636 * and you must therefore hold required locks before calling it.
637 *
638 * A buffer cannot be placed on two lists at the same time.
639 */
640 static inline void __skb_queue_after(struct sk_buff_head *list,
641 struct sk_buff *prev,
642 struct sk_buff *newsk)
643 {
644 struct sk_buff *next;
645 list->qlen++;
646
647 next = prev->next;
648 newsk->next = next;
649 newsk->prev = prev;
650 next->prev = prev->next = newsk;
651 }
652
653 /**
654 * __skb_queue_head - queue a buffer at the list head
655 * @list: list to use
656 * @newsk: buffer to queue
657 *
658 * Queue a buffer at the start of a list. This function takes no locks
659 * and you must therefore hold required locks before calling it.
660 *
661 * A buffer cannot be placed on two lists at the same time.
662 */
663 extern void skb_queue_head(struct sk_buff_head *list, struct sk_buff *newsk);
664 static inline void __skb_queue_head(struct sk_buff_head *list,
665 struct sk_buff *newsk)
666 {
667 __skb_queue_after(list, (struct sk_buff *)list, newsk);
668 }
669
670 /**
671 * __skb_queue_tail - queue a buffer at the list tail
672 * @list: list to use
673 * @newsk: buffer to queue
674 *
675 * Queue a buffer at the end of a list. This function takes no locks
676 * and you must therefore hold required locks before calling it.
677 *
678 * A buffer cannot be placed on two lists at the same time.
679 */
680 extern void skb_queue_tail(struct sk_buff_head *list, struct sk_buff *newsk);
681 static inline void __skb_queue_tail(struct sk_buff_head *list,
682 struct sk_buff *newsk)
683 {
684 struct sk_buff *prev, *next;
685
686 list->qlen++;
687 next = (struct sk_buff *)list;
688 prev = next->prev;
689 newsk->next = next;
690 newsk->prev = prev;
691 next->prev = prev->next = newsk;
692 }
693
694
695 /**
696 * __skb_dequeue - remove from the head of the queue
697 * @list: list to dequeue from
698 *
699 * Remove the head of the list. This function does not take any locks
700 * so must be used with appropriate locks held only. The head item is
701 * returned or %NULL if the list is empty.
702 */
703 extern struct sk_buff *skb_dequeue(struct sk_buff_head *list);
704 static inline struct sk_buff *__skb_dequeue(struct sk_buff_head *list)
705 {
706 struct sk_buff *next, *prev, *result;
707
708 prev = (struct sk_buff *) list;
709 next = prev->next;
710 result = NULL;
711 if (next != prev) {
712 result = next;
713 next = next->next;
714 list->qlen--;
715 next->prev = prev;
716 prev->next = next;
717 result->next = result->prev = NULL;
718 }
719 return result;
720 }
721
722
723 /*
724 * Insert a packet on a list.
725 */
726 extern void skb_insert(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list);
727 static inline void __skb_insert(struct sk_buff *newsk,
728 struct sk_buff *prev, struct sk_buff *next,
729 struct sk_buff_head *list)
730 {
731 newsk->next = next;
732 newsk->prev = prev;
733 next->prev = prev->next = newsk;
734 list->qlen++;
735 }
736
737 /*
738 * Place a packet after a given packet in a list.
739 */
740 extern void skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list);
741 static inline void __skb_append(struct sk_buff *old, struct sk_buff *newsk, struct sk_buff_head *list)
742 {
743 __skb_insert(newsk, old, old->next, list);
744 }
745
746 /*
747 * remove sk_buff from list. _Must_ be called atomically, and with
748 * the list known..
749 */
750 extern void skb_unlink(struct sk_buff *skb, struct sk_buff_head *list);
751 static inline void __skb_unlink(struct sk_buff *skb, struct sk_buff_head *list)
752 {
753 struct sk_buff *next, *prev;
754
755 list->qlen--;
756 next = skb->next;
757 prev = skb->prev;
758 skb->next = skb->prev = NULL;
759 next->prev = prev;
760 prev->next = next;
761 }
762
763
764 /* XXX: more streamlined implementation */
765
766 /**
767 * __skb_dequeue_tail - remove from the tail of the queue
768 * @list: list to dequeue from
769 *
770 * Remove the tail of the list. This function does not take any locks
771 * so must be used with appropriate locks held only. The tail item is
772 * returned or %NULL if the list is empty.
773 */
774 extern struct sk_buff *skb_dequeue_tail(struct sk_buff_head *list);
775 static inline struct sk_buff *__skb_dequeue_tail(struct sk_buff_head *list)
776 {
777 struct sk_buff *skb = skb_peek_tail(list);
778 if (skb)
779 __skb_unlink(skb, list);
780 return skb;
781 }
782
783
784 static inline int skb_is_nonlinear(const struct sk_buff *skb)
785 {
786 return skb->data_len;
787 }
788
789 static inline unsigned int skb_headlen(const struct sk_buff *skb)
790 {
791 return skb->len - skb->data_len;
792 }
793
794 static inline int skb_pagelen(const struct sk_buff *skb)
795 {
796 int i, len = 0;
797
798 for (i = (int)skb_shinfo(skb)->nr_frags - 1; i >= 0; i--)
799 len += skb_shinfo(skb)->frags[i].size;
800 return len + skb_headlen(skb);
801 }
802
803 static inline void skb_fill_page_desc(struct sk_buff *skb, int i,
804 struct page *page, int off, int size)
805 {
806 skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
807
808 frag->page = page;
809 frag->page_offset = off;
810 frag->size = size;
811 skb_shinfo(skb)->nr_frags = i + 1;
812 }
813
814 #define SKB_PAGE_ASSERT(skb) BUG_ON(skb_shinfo(skb)->nr_frags)
815 #define SKB_FRAG_ASSERT(skb) BUG_ON(skb_shinfo(skb)->frag_list)
816 #define SKB_LINEAR_ASSERT(skb) BUG_ON(skb_is_nonlinear(skb))
817
818 /*
819 * Add data to an sk_buff
820 */
821 static inline unsigned char *__skb_put(struct sk_buff *skb, unsigned int len)
822 {
823 unsigned char *tmp = skb->tail;
824 SKB_LINEAR_ASSERT(skb);
825 skb->tail += len;
826 skb->len += len;
827 return tmp;
828 }
829
830 /**
831 * skb_put - add data to a buffer
832 * @skb: buffer to use
833 * @len: amount of data to add
834 *
835 * This function extends the used data area of the buffer. If this would
836 * exceed the total buffer size the kernel will panic. A pointer to the
837 * first byte of the extra data is returned.
838 */
839 static inline unsigned char *skb_put(struct sk_buff *skb, unsigned int len)
840 {
841 unsigned char *tmp = skb->tail;
842 SKB_LINEAR_ASSERT(skb);
843 skb->tail += len;
844 skb->len += len;
845 if (unlikely(skb->tail>skb->end))
846 skb_over_panic(skb, len, current_text_addr());
847 return tmp;
848 }
849
850 static inline unsigned char *__skb_push(struct sk_buff *skb, unsigned int len)
851 {
852 skb->data -= len;
853 skb->len += len;
854 return skb->data;
855 }
856
857 /**
858 * skb_push - add data to the start of a buffer
859 * @skb: buffer to use
860 * @len: amount of data to add
861 *
862 * This function extends the used data area of the buffer at the buffer
863 * start. If this would exceed the total buffer headroom the kernel will
864 * panic. A pointer to the first byte of the extra data is returned.
865 */
866 static inline unsigned char *skb_push(struct sk_buff *skb, unsigned int len)
867 {
868 skb->data -= len;
869 skb->len += len;
870 if (unlikely(skb->data<skb->head))
871 skb_under_panic(skb, len, current_text_addr());
872 return skb->data;
873 }
874
875 static inline unsigned char *__skb_pull(struct sk_buff *skb, unsigned int len)
876 {
877 skb->len -= len;
878 BUG_ON(skb->len < skb->data_len);
879 return skb->data += len;
880 }
881
882 /**
883 * skb_pull - remove data from the start of a buffer
884 * @skb: buffer to use
885 * @len: amount of data to remove
886 *
887 * This function removes data from the start of a buffer, returning
888 * the memory to the headroom. A pointer to the next data in the buffer
889 * is returned. Once the data has been pulled future pushes will overwrite
890 * the old data.
891 */
892 static inline unsigned char *skb_pull(struct sk_buff *skb, unsigned int len)
893 {
894 return unlikely(len > skb->len) ? NULL : __skb_pull(skb, len);
895 }
896
897 extern unsigned char *__pskb_pull_tail(struct sk_buff *skb, int delta);
898
899 static inline unsigned char *__pskb_pull(struct sk_buff *skb, unsigned int len)
900 {
901 if (len > skb_headlen(skb) &&
902 !__pskb_pull_tail(skb, len-skb_headlen(skb)))
903 return NULL;
904 skb->len -= len;
905 return skb->data += len;
906 }
907
908 static inline unsigned char *pskb_pull(struct sk_buff *skb, unsigned int len)
909 {
910 return unlikely(len > skb->len) ? NULL : __pskb_pull(skb, len);
911 }
912
913 static inline int pskb_may_pull(struct sk_buff *skb, unsigned int len)
914 {
915 if (likely(len <= skb_headlen(skb)))
916 return 1;
917 if (unlikely(len > skb->len))
918 return 0;
919 return __pskb_pull_tail(skb, len-skb_headlen(skb)) != NULL;
920 }
921
922 /**
923 * skb_headroom - bytes at buffer head
924 * @skb: buffer to check
925 *
926 * Return the number of bytes of free space at the head of an &sk_buff.
927 */
928 static inline int skb_headroom(const struct sk_buff *skb)
929 {
930 return skb->data - skb->head;
931 }
932
933 /**
934 * skb_tailroom - bytes at buffer end
935 * @skb: buffer to check
936 *
937 * Return the number of bytes of free space at the tail of an sk_buff
938 */
939 static inline int skb_tailroom(const struct sk_buff *skb)
940 {
941 return skb_is_nonlinear(skb) ? 0 : skb->end - skb->tail;
942 }
943
944 /**
945 * skb_reserve - adjust headroom
946 * @skb: buffer to alter
947 * @len: bytes to move
948 *
949 * Increase the headroom of an empty &sk_buff by reducing the tail
950 * room. This is only allowed for an empty buffer.
951 */
952 static inline void skb_reserve(struct sk_buff *skb, int len)
953 {
954 skb->data += len;
955 skb->tail += len;
956 }
957
958 /*
959 * CPUs often take a performance hit when accessing unaligned memory
960 * locations. The actual performance hit varies, it can be small if the
961 * hardware handles it or large if we have to take an exception and fix it
962 * in software.
963 *
964 * Since an ethernet header is 14 bytes network drivers often end up with
965 * the IP header at an unaligned offset. The IP header can be aligned by
966 * shifting the start of the packet by 2 bytes. Drivers should do this
967 * with:
968 *
969 * skb_reserve(NET_IP_ALIGN);
970 *
971 * The downside to this alignment of the IP header is that the DMA is now
972 * unaligned. On some architectures the cost of an unaligned DMA is high
973 * and this cost outweighs the gains made by aligning the IP header.
974 *
975 * Since this trade off varies between architectures, we allow NET_IP_ALIGN
976 * to be overridden.
977 */
978 #ifndef NET_IP_ALIGN
979 #define NET_IP_ALIGN 2
980 #endif
981
982 /*
983 * The networking layer reserves some headroom in skb data (via
984 * dev_alloc_skb). This is used to avoid having to reallocate skb data when
985 * the header has to grow. In the default case, if the header has to grow
986 * 16 bytes or less we avoid the reallocation.
987 *
988 * Unfortunately this headroom changes the DMA alignment of the resulting
989 * network packet. As for NET_IP_ALIGN, this unaligned DMA is expensive
990 * on some architectures. An architecture can override this value,
991 * perhaps setting it to a cacheline in size (since that will maintain
992 * cacheline alignment of the DMA). It must be a power of 2.
993 *
994 * Various parts of the networking layer expect at least 16 bytes of
995 * headroom, you should not reduce this.
996 */
997 #ifndef NET_SKB_PAD
998 #define NET_SKB_PAD 16
999 #endif
1000
1001 extern int ___pskb_trim(struct sk_buff *skb, unsigned int len);
1002
1003 static inline void __skb_trim(struct sk_buff *skb, unsigned int len)
1004 {
1005 if (unlikely(skb->data_len)) {
1006 WARN_ON(1);
1007 return;
1008 }
1009 skb->len = len;
1010 skb->tail = skb->data + len;
1011 }
1012
1013 /**
1014 * skb_trim - remove end from a buffer
1015 * @skb: buffer to alter
1016 * @len: new length
1017 *
1018 * Cut the length of a buffer down by removing data from the tail. If
1019 * the buffer is already under the length specified it is not modified.
1020 * The skb must be linear.
1021 */
1022 static inline void skb_trim(struct sk_buff *skb, unsigned int len)
1023 {
1024 if (skb->len > len)
1025 __skb_trim(skb, len);
1026 }
1027
1028
1029 static inline int __pskb_trim(struct sk_buff *skb, unsigned int len)
1030 {
1031 if (skb->data_len)
1032 return ___pskb_trim(skb, len);
1033 __skb_trim(skb, len);
1034 return 0;
1035 }
1036
1037 static inline int pskb_trim(struct sk_buff *skb, unsigned int len)
1038 {
1039 return (len < skb->len) ? __pskb_trim(skb, len) : 0;
1040 }
1041
1042 /**
1043 * skb_orphan - orphan a buffer
1044 * @skb: buffer to orphan
1045 *
1046 * If a buffer currently has an owner then we call the owner's
1047 * destructor function and make the @skb unowned. The buffer continues
1048 * to exist but is no longer charged to its former owner.
1049 */
1050 static inline void skb_orphan(struct sk_buff *skb)
1051 {
1052 if (skb->destructor)
1053 skb->destructor(skb);
1054 skb->destructor = NULL;
1055 skb->sk = NULL;
1056 }
1057
1058 /**
1059 * __skb_queue_purge - empty a list
1060 * @list: list to empty
1061 *
1062 * Delete all buffers on an &sk_buff list. Each buffer is removed from
1063 * the list and one reference dropped. This function does not take the
1064 * list lock and the caller must hold the relevant locks to use it.
1065 */
1066 extern void skb_queue_purge(struct sk_buff_head *list);
1067 static inline void __skb_queue_purge(struct sk_buff_head *list)
1068 {
1069 struct sk_buff *skb;
1070 while ((skb = __skb_dequeue(list)) != NULL)
1071 kfree_skb(skb);
1072 }
1073
1074 /**
1075 * __dev_alloc_skb - allocate an skbuff for receiving
1076 * @length: length to allocate
1077 * @gfp_mask: get_free_pages mask, passed to alloc_skb
1078 *
1079 * Allocate a new &sk_buff and assign it a usage count of one. The
1080 * buffer has unspecified headroom built in. Users should allocate
1081 * the headroom they think they need without accounting for the
1082 * built in space. The built in space is used for optimisations.
1083 *
1084 * %NULL is returned if there is no free memory.
1085 */
1086 static inline struct sk_buff *__dev_alloc_skb(unsigned int length,
1087 gfp_t gfp_mask)
1088 {
1089 struct sk_buff *skb = alloc_skb(length + NET_SKB_PAD, gfp_mask);
1090 if (likely(skb))
1091 skb_reserve(skb, NET_SKB_PAD);
1092 return skb;
1093 }
1094
1095 /**
1096 * dev_alloc_skb - allocate an skbuff for receiving
1097 * @length: length to allocate
1098 *
1099 * Allocate a new &sk_buff and assign it a usage count of one. The
1100 * buffer has unspecified headroom built in. Users should allocate
1101 * the headroom they think they need without accounting for the
1102 * built in space. The built in space is used for optimisations.
1103 *
1104 * %NULL is returned if there is no free memory. Although this function
1105 * allocates memory it can be called from an interrupt.
1106 */
1107 static inline struct sk_buff *dev_alloc_skb(unsigned int length)
1108 {
1109 return __dev_alloc_skb(length, GFP_ATOMIC);
1110 }
1111
1112 extern struct sk_buff *__netdev_alloc_skb(struct net_device *dev,
1113 unsigned int length, gfp_t gfp_mask);
1114
1115 /**
1116 * netdev_alloc_skb - allocate an skbuff for rx on a specific device
1117 * @dev: network device to receive on
1118 * @length: length to allocate
1119 *
1120 * Allocate a new &sk_buff and assign it a usage count of one. The
1121 * buffer has unspecified headroom built in. Users should allocate
1122 * the headroom they think they need without accounting for the
1123 * built in space. The built in space is used for optimisations.
1124 *
1125 * %NULL is returned if there is no free memory. Although this function
1126 * allocates memory it can be called from an interrupt.
1127 */
1128 static inline struct sk_buff *netdev_alloc_skb(struct net_device *dev,
1129 unsigned int length)
1130 {
1131 return __netdev_alloc_skb(dev, length, GFP_ATOMIC);
1132 }
1133
1134 /**
1135 * skb_cow - copy header of skb when it is required
1136 * @skb: buffer to cow
1137 * @headroom: needed headroom
1138 *
1139 * If the skb passed lacks sufficient headroom or its data part
1140 * is shared, data is reallocated. If reallocation fails, an error
1141 * is returned and original skb is not changed.
1142 *
1143 * The result is skb with writable area skb->head...skb->tail
1144 * and at least @headroom of space at head.
1145 */
1146 static inline int skb_cow(struct sk_buff *skb, unsigned int headroom)
1147 {
1148 int delta = (headroom > NET_SKB_PAD ? headroom : NET_SKB_PAD) -
1149 skb_headroom(skb);
1150
1151 if (delta < 0)
1152 delta = 0;
1153
1154 if (delta || skb_cloned(skb))
1155 return pskb_expand_head(skb, (delta + (NET_SKB_PAD-1)) &
1156 ~(NET_SKB_PAD-1), 0, GFP_ATOMIC);
1157 return 0;
1158 }
1159
1160 /**
1161 * skb_padto - pad an skbuff up to a minimal size
1162 * @skb: buffer to pad
1163 * @len: minimal length
1164 *
1165 * Pads up a buffer to ensure the trailing bytes exist and are
1166 * blanked. If the buffer already contains sufficient data it
1167 * is untouched. Otherwise it is extended. Returns zero on
1168 * success. The skb is freed on error.
1169 */
1170
1171 static inline int skb_padto(struct sk_buff *skb, unsigned int len)
1172 {
1173 unsigned int size = skb->len;
1174 if (likely(size >= len))
1175 return 0;
1176 return skb_pad(skb, len-size);
1177 }
1178
1179 static inline int skb_add_data(struct sk_buff *skb,
1180 char __user *from, int copy)
1181 {
1182 const int off = skb->len;
1183
1184 if (skb->ip_summed == CHECKSUM_NONE) {
1185 int err = 0;
1186 unsigned int csum = csum_and_copy_from_user(from,
1187 skb_put(skb, copy),
1188 copy, 0, &err);
1189 if (!err) {
1190 skb->csum = csum_block_add(skb->csum, csum, off);
1191 return 0;
1192 }
1193 } else if (!copy_from_user(skb_put(skb, copy), from, copy))
1194 return 0;
1195
1196 __skb_trim(skb, off);
1197 return -EFAULT;
1198 }
1199
1200 static inline int skb_can_coalesce(struct sk_buff *skb, int i,
1201 struct page *page, int off)
1202 {
1203 if (i) {
1204 struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
1205
1206 return page == frag->page &&
1207 off == frag->page_offset + frag->size;
1208 }
1209 return 0;
1210 }
1211
1212 static inline int __skb_linearize(struct sk_buff *skb)
1213 {
1214 return __pskb_pull_tail(skb, skb->data_len) ? 0 : -ENOMEM;
1215 }
1216
1217 /**
1218 * skb_linearize - convert paged skb to linear one
1219 * @skb: buffer to linarize
1220 *
1221 * If there is no free memory -ENOMEM is returned, otherwise zero
1222 * is returned and the old skb data released.
1223 */
1224 static inline int skb_linearize(struct sk_buff *skb)
1225 {
1226 return skb_is_nonlinear(skb) ? __skb_linearize(skb) : 0;
1227 }
1228
1229 /**
1230 * skb_linearize_cow - make sure skb is linear and writable
1231 * @skb: buffer to process
1232 *
1233 * If there is no free memory -ENOMEM is returned, otherwise zero
1234 * is returned and the old skb data released.
1235 */
1236 static inline int skb_linearize_cow(struct sk_buff *skb)
1237 {
1238 return skb_is_nonlinear(skb) || skb_cloned(skb) ?
1239 __skb_linearize(skb) : 0;
1240 }
1241
1242 /**
1243 * skb_postpull_rcsum - update checksum for received skb after pull
1244 * @skb: buffer to update
1245 * @start: start of data before pull
1246 * @len: length of data pulled
1247 *
1248 * After doing a pull on a received packet, you need to call this to
1249 * update the CHECKSUM_HW checksum, or set ip_summed to CHECKSUM_NONE
1250 * so that it can be recomputed from scratch.
1251 */
1252
1253 static inline void skb_postpull_rcsum(struct sk_buff *skb,
1254 const void *start, unsigned int len)
1255 {
1256 if (skb->ip_summed == CHECKSUM_HW)
1257 skb->csum = csum_sub(skb->csum, csum_partial(start, len, 0));
1258 }
1259
1260 unsigned char *skb_pull_rcsum(struct sk_buff *skb, unsigned int len);
1261
1262 /**
1263 * pskb_trim_rcsum - trim received skb and update checksum
1264 * @skb: buffer to trim
1265 * @len: new length
1266 *
1267 * This is exactly the same as pskb_trim except that it ensures the
1268 * checksum of received packets are still valid after the operation.
1269 */
1270
1271 static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len)
1272 {
1273 if (likely(len >= skb->len))
1274 return 0;
1275 if (skb->ip_summed == CHECKSUM_HW)
1276 skb->ip_summed = CHECKSUM_NONE;
1277 return __pskb_trim(skb, len);
1278 }
1279
1280 static inline void *kmap_skb_frag(const skb_frag_t *frag)
1281 {
1282 #ifdef CONFIG_HIGHMEM
1283 BUG_ON(in_irq());
1284
1285 local_bh_disable();
1286 #endif
1287 return kmap_atomic(frag->page, KM_SKB_DATA_SOFTIRQ);
1288 }
1289
1290 static inline void kunmap_skb_frag(void *vaddr)
1291 {
1292 kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
1293 #ifdef CONFIG_HIGHMEM
1294 local_bh_enable();
1295 #endif
1296 }
1297
1298 #define skb_queue_walk(queue, skb) \
1299 for (skb = (queue)->next; \
1300 prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \
1301 skb = skb->next)
1302
1303 #define skb_queue_reverse_walk(queue, skb) \
1304 for (skb = (queue)->prev; \
1305 prefetch(skb->prev), (skb != (struct sk_buff *)(queue)); \
1306 skb = skb->prev)
1307
1308
1309 extern struct sk_buff *skb_recv_datagram(struct sock *sk, unsigned flags,
1310 int noblock, int *err);
1311 extern unsigned int datagram_poll(struct file *file, struct socket *sock,
1312 struct poll_table_struct *wait);
1313 extern int skb_copy_datagram_iovec(const struct sk_buff *from,
1314 int offset, struct iovec *to,
1315 int size);
1316 extern int skb_copy_and_csum_datagram_iovec(struct sk_buff *skb,
1317 int hlen,
1318 struct iovec *iov);
1319 extern void skb_free_datagram(struct sock *sk, struct sk_buff *skb);
1320 extern void skb_kill_datagram(struct sock *sk, struct sk_buff *skb,
1321 unsigned int flags);
1322 extern unsigned int skb_checksum(const struct sk_buff *skb, int offset,
1323 int len, unsigned int csum);
1324 extern int skb_copy_bits(const struct sk_buff *skb, int offset,
1325 void *to, int len);
1326 extern int skb_store_bits(const struct sk_buff *skb, int offset,
1327 void *from, int len);
1328 extern unsigned int skb_copy_and_csum_bits(const struct sk_buff *skb,
1329 int offset, u8 *to, int len,
1330 unsigned int csum);
1331 extern void skb_copy_and_csum_dev(const struct sk_buff *skb, u8 *to);
1332 extern void skb_split(struct sk_buff *skb,
1333 struct sk_buff *skb1, const u32 len);
1334
1335 extern struct sk_buff *skb_segment(struct sk_buff *skb, int features);
1336
1337 static inline void *skb_header_pointer(const struct sk_buff *skb, int offset,
1338 int len, void *buffer)
1339 {
1340 int hlen = skb_headlen(skb);
1341
1342 if (hlen - offset >= len)
1343 return skb->data + offset;
1344
1345 if (skb_copy_bits(skb, offset, buffer, len) < 0)
1346 return NULL;
1347
1348 return buffer;
1349 }
1350
1351 extern void skb_init(void);
1352 extern void skb_add_mtu(int mtu);
1353
1354 /**
1355 * skb_get_timestamp - get timestamp from a skb
1356 * @skb: skb to get stamp from
1357 * @stamp: pointer to struct timeval to store stamp in
1358 *
1359 * Timestamps are stored in the skb as offsets to a base timestamp.
1360 * This function converts the offset back to a struct timeval and stores
1361 * it in stamp.
1362 */
1363 static inline void skb_get_timestamp(const struct sk_buff *skb, struct timeval *stamp)
1364 {
1365 stamp->tv_sec = skb->tstamp.off_sec;
1366 stamp->tv_usec = skb->tstamp.off_usec;
1367 }
1368
1369 /**
1370 * skb_set_timestamp - set timestamp of a skb
1371 * @skb: skb to set stamp of
1372 * @stamp: pointer to struct timeval to get stamp from
1373 *
1374 * Timestamps are stored in the skb as offsets to a base timestamp.
1375 * This function converts a struct timeval to an offset and stores
1376 * it in the skb.
1377 */
1378 static inline void skb_set_timestamp(struct sk_buff *skb, const struct timeval *stamp)
1379 {
1380 skb->tstamp.off_sec = stamp->tv_sec;
1381 skb->tstamp.off_usec = stamp->tv_usec;
1382 }
1383
1384 extern void __net_timestamp(struct sk_buff *skb);
1385
1386 extern unsigned int __skb_checksum_complete(struct sk_buff *skb);
1387
1388 /**
1389 * skb_checksum_complete - Calculate checksum of an entire packet
1390 * @skb: packet to process
1391 *
1392 * This function calculates the checksum over the entire packet plus
1393 * the value of skb->csum. The latter can be used to supply the
1394 * checksum of a pseudo header as used by TCP/UDP. It returns the
1395 * checksum.
1396 *
1397 * For protocols that contain complete checksums such as ICMP/TCP/UDP,
1398 * this function can be used to verify that checksum on received
1399 * packets. In that case the function should return zero if the
1400 * checksum is correct. In particular, this function will return zero
1401 * if skb->ip_summed is CHECKSUM_UNNECESSARY which indicates that the
1402 * hardware has already verified the correctness of the checksum.
1403 */
1404 static inline unsigned int skb_checksum_complete(struct sk_buff *skb)
1405 {
1406 return skb->ip_summed != CHECKSUM_UNNECESSARY &&
1407 __skb_checksum_complete(skb);
1408 }
1409
1410 #ifdef CONFIG_NETFILTER
1411 static inline void nf_conntrack_put(struct nf_conntrack *nfct)
1412 {
1413 if (nfct && atomic_dec_and_test(&nfct->use))
1414 nfct->destroy(nfct);
1415 }
1416 static inline void nf_conntrack_get(struct nf_conntrack *nfct)
1417 {
1418 if (nfct)
1419 atomic_inc(&nfct->use);
1420 }
1421 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
1422 static inline void nf_conntrack_get_reasm(struct sk_buff *skb)
1423 {
1424 if (skb)
1425 atomic_inc(&skb->users);
1426 }
1427 static inline void nf_conntrack_put_reasm(struct sk_buff *skb)
1428 {
1429 if (skb)
1430 kfree_skb(skb);
1431 }
1432 #endif
1433 #ifdef CONFIG_BRIDGE_NETFILTER
1434 static inline void nf_bridge_put(struct nf_bridge_info *nf_bridge)
1435 {
1436 if (nf_bridge && atomic_dec_and_test(&nf_bridge->use))
1437 kfree(nf_bridge);
1438 }
1439 static inline void nf_bridge_get(struct nf_bridge_info *nf_bridge)
1440 {
1441 if (nf_bridge)
1442 atomic_inc(&nf_bridge->use);
1443 }
1444 #endif /* CONFIG_BRIDGE_NETFILTER */
1445 static inline void nf_reset(struct sk_buff *skb)
1446 {
1447 nf_conntrack_put(skb->nfct);
1448 skb->nfct = NULL;
1449 #if defined(CONFIG_NF_CONNTRACK) || defined(CONFIG_NF_CONNTRACK_MODULE)
1450 nf_conntrack_put_reasm(skb->nfct_reasm);
1451 skb->nfct_reasm = NULL;
1452 #endif
1453 #ifdef CONFIG_BRIDGE_NETFILTER
1454 nf_bridge_put(skb->nf_bridge);
1455 skb->nf_bridge = NULL;
1456 #endif
1457 }
1458
1459 #else /* CONFIG_NETFILTER */
1460 static inline void nf_reset(struct sk_buff *skb) {}
1461 #endif /* CONFIG_NETFILTER */
1462
1463 #ifdef CONFIG_NETWORK_SECMARK
1464 static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from)
1465 {
1466 to->secmark = from->secmark;
1467 }
1468
1469 static inline void skb_init_secmark(struct sk_buff *skb)
1470 {
1471 skb->secmark = 0;
1472 }
1473 #else
1474 static inline void skb_copy_secmark(struct sk_buff *to, const struct sk_buff *from)
1475 { }
1476
1477 static inline void skb_init_secmark(struct sk_buff *skb)
1478 { }
1479 #endif
1480
1481 static inline int skb_is_gso(const struct sk_buff *skb)
1482 {
1483 return skb_shinfo(skb)->gso_size;
1484 }
1485
1486 #endif /* __KERNEL__ */
1487 #endif /* _LINUX_SKBUFF_H */
This page took 0.177296 seconds and 4 git commands to generate.