include/linux/usb/serial.h

   1 /*
   2  * USB Serial Converter stuff
   3  *
   4  *      Copyright (C) 1999 - 2005
   5  *          Greg Kroah-Hartman (greg@kroah.com)
   6  *
   7  *      This program is free software; you can redistribute it and/or modify
   8  *      it under the terms of the GNU General Public License as published by
   9  *      the Free Software Foundation; version 2 of the License.
  10  *
  11  */
  12
  13
  14 #ifndef __LINUX_USB_SERIAL_H
  15 #define __LINUX_USB_SERIAL_H
  16
  17 #include <linux/kref.h>
  18 #include <linux/mutex.h>
  19
  20 #define SERIAL_TTY_MAJOR        188     /* Nice legal number now */
  21 #define SERIAL_TTY_MINORS       255     /* loads of devices :) */
  22
  23 #define MAX_NUM_PORTS           8       /* The maximum number of ports one device can grab at once */
  24
  25 /* parity check flag */
  26 #define RELEVANT_IFLAG(iflag)   (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
  27
  28 /**
  29  * usb_serial_port: structure for the specific ports of a device.
  30  * @serial: pointer back to the struct usb_serial owner of this port.
  31  * @tty: pointer to the corresponding tty for this port.
  32  * @lock: spinlock to grab when updating portions of this structure.
  33  * @mutex: mutex used to synchronize serial_open() and serial_close()
  34  *      access for this port.
  35  * @number: the number of the port (the minor number).
  36  * @interrupt_in_buffer: pointer to the interrupt in buffer for this port.
  37  * @interrupt_in_urb: pointer to the interrupt in struct urb for this port.
  38  * @interrupt_in_endpointAddress: endpoint address for the interrupt in pipe
  39  *      for this port.
  40  * @interrupt_out_buffer: pointer to the interrupt out buffer for this port.
  41  * @interrupt_out_size: the size of the interrupt_out_buffer, in bytes.
  42  * @interrupt_out_urb: pointer to the interrupt out struct urb for this port.
  43  * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
  44  *      for this port.
  45  * @bulk_in_buffer: pointer to the bulk in buffer for this port.
  46  * @read_urb: pointer to the bulk in struct urb for this port.
  47  * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
  48  *      port.
  49  * @bulk_out_buffer: pointer to the bulk out buffer for this port.
  50  * @bulk_out_size: the size of the bulk_out_buffer, in bytes.
  51  * @write_urb: pointer to the bulk out struct urb for this port.
  52  * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
  53  *      port.
  54  * @write_wait: a wait_queue_head_t used by the port.
  55  * @work: work queue entry for the line discipline waking up.
  56  * @open_count: number of times this port has been opened.
  57  * @throttled: nonzero if the read urb is inactive to throttle the device
  58  * @throttle_req: nonzero if the tty wants to throttle us
  59  *
  60  * This structure is used by the usb-serial core and drivers for the specific
  61  * ports of a device.
  62  */
  63 struct usb_serial_port {
  64         struct usb_serial *     serial;
  65         struct tty_struct *     tty;
  66         spinlock_t              lock;
  67         struct mutex            mutex;
  68         unsigned char           number;
  69
  70         unsigned char *         interrupt_in_buffer;
  71         struct urb *            interrupt_in_urb;
  72         __u8                    interrupt_in_endpointAddress;
  73
  74         unsigned char *         interrupt_out_buffer;
  75         int                     interrupt_out_size;
  76         struct urb *            interrupt_out_urb;
  77         __u8                    interrupt_out_endpointAddress;
  78
  79         unsigned char *         bulk_in_buffer;
  80         int                     bulk_in_size;
  81         struct urb *            read_urb;
  82         __u8                    bulk_in_endpointAddress;
  83
  84         unsigned char *         bulk_out_buffer;
  85         int                     bulk_out_size;
  86         struct urb *            write_urb;
  87         int                     write_urb_busy;
  88         __u8                    bulk_out_endpointAddress;
  89
  90         wait_queue_head_t       write_wait;
  91         struct work_struct      work;
  92         int                     open_count;
  93         char                    throttled;
  94         char                    throttle_req;
  95         char                    console;
  96         struct device           dev;
  97 };
  98 #define to_usb_serial_port(d) container_of(d, struct usb_serial_port, dev)
  99
 100 /* get and set the port private data pointer helper functions */
 101 static inline void *usb_get_serial_port_data (struct usb_serial_port *port)
 102 {
 103         return dev_get_drvdata(&port->dev);
 104 }
 105
 106 static inline void usb_set_serial_port_data (struct usb_serial_port *port, void *data)
 107 {
 108         dev_set_drvdata(&port->dev, data);
 109 }
 110
 111 /**
 112  * usb_serial - structure used by the usb-serial core for a device
 113  * @dev: pointer to the struct usb_device for this device
 114  * @type: pointer to the struct usb_serial_driver for this device
 115  * @interface: pointer to the struct usb_interface for this device
 116  * @minor: the starting minor number for this device
 117  * @num_ports: the number of ports this device has
 118  * @num_interrupt_in: number of interrupt in endpoints we have
 119  * @num_interrupt_out: number of interrupt out endpoints we have
 120  * @num_bulk_in: number of bulk in endpoints we have
 121  * @num_bulk_out: number of bulk out endpoints we have
 122  * @port: array of struct usb_serial_port structures for the different ports.
 123  * @private: place to put any driver specific information that is needed.  The
 124  *      usb-serial driver is required to manage this data, the usb-serial core
 125  *      will not touch this.  Use usb_get_serial_data() and
 126  *      usb_set_serial_data() to access this.
 127  */
 128 struct usb_serial {
 129         struct usb_device *             dev;
 130         struct usb_serial_driver *      type;
 131         struct usb_interface *          interface;
 132         unsigned char                   disconnected;
 133         unsigned char                   minor;
 134         unsigned char                   num_ports;
 135         unsigned char                   num_port_pointers;
 136         char                            num_interrupt_in;
 137         char                            num_interrupt_out;
 138         char                            num_bulk_in;
 139         char                            num_bulk_out;
 140         struct usb_serial_port *        port[MAX_NUM_PORTS];
 141         struct kref                     kref;
 142         struct mutex                    disc_mutex;
 143         void *                          private;
 144 };
 145 #define to_usb_serial(d) container_of(d, struct usb_serial, kref)
 146
 147 #define NUM_DONT_CARE   99
 148
 149 /* get and set the serial private data pointer helper functions */
 150 static inline void *usb_get_serial_data (struct usb_serial *serial)
 151 {
 152         return serial->private;
 153 }
 154
 155 static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
 156 {
 157         serial->private = data;
 158 }
 159
 160 /**
 161  * usb_serial_driver - describes a usb serial driver
 162  * @description: pointer to a string that describes this driver.  This string used
 163  *      in the syslog messages when a device is inserted or removed.
 164  * @id_table: pointer to a list of usb_device_id structures that define all
 165  *      of the devices this structure can support.
 166  * @num_interrupt_in: If a device doesn't have this many interrupt-in
 167  *      endpoints, it won't be sent to the driver's attach() method.
 168  *      (But it might still be sent to the probe() method.)
 169  * @num_interrupt_out: If a device doesn't have this many interrupt-out
 170  *      endpoints, it won't be sent to the driver's attach() method.
 171  *      (But it might still be sent to the probe() method.)
 172  * @num_bulk_in: If a device doesn't have this many bulk-in
 173  *      endpoints, it won't be sent to the driver's attach() method.
 174  *      (But it might still be sent to the probe() method.)
 175  * @num_bulk_out: If a device doesn't have this many bulk-out
 176  *      endpoints, it won't be sent to the driver's attach() method.
 177  *      (But it might still be sent to the probe() method.)
 178  * @num_ports: the number of different ports this device will have.
 179  * @calc_num_ports: pointer to a function to determine how many ports this
 180  *      device has dynamically.  It will be called after the probe()
 181  *      callback is called, but before attach()
 182  * @probe: pointer to the driver's probe function.
 183  *      This will be called when the device is inserted into the system,
 184  *      but before the device has been fully initialized by the usb_serial
 185  *      subsystem.  Use this function to download any firmware to the device,
 186  *      or any other early initialization that might be needed.
 187  *      Return 0 to continue on with the initialization sequence.  Anything
 188  *      else will abort it.
 189  * @attach: pointer to the driver's attach function.
 190  *      This will be called when the struct usb_serial structure is fully set
 191  *      set up.  Do any local initialization of the device, or any private
 192  *      memory structure allocation at this point in time.
 193  * @shutdown: pointer to the driver's shutdown function.  This will be
 194  *      called when the device is removed from the system.
 195  * @usb_driver: pointer to the struct usb_driver that controls this
 196  *      device.  This is necessary to allow dynamic ids to be added to
 197  *      the driver from sysfs.
 198  *
 199  * This structure is defines a USB Serial driver.  It provides all of
 200  * the information that the USB serial core code needs.  If the function
 201  * pointers are defined, then the USB serial core code will call them when
 202  * the corresponding tty port functions are called.  If they are not
 203  * called, the generic serial function will be used instead.
 204  *
 205  * The driver.owner field should be set to the module owner of this driver.
 206  * The driver.name field should be set to the name of this driver (remember
 207  * it will show up in sysfs, so it needs to be short and to the point.
 208  * Useing the module name is a good idea.)
 209  */
 210 struct usb_serial_driver {
 211         const char *description;
 212         const struct usb_device_id *id_table;
 213         char    num_interrupt_in;
 214         char    num_interrupt_out;
 215         char    num_bulk_in;
 216         char    num_bulk_out;
 217         char    num_ports;
 218
 219         struct list_head        driver_list;
 220         struct device_driver    driver;
 221         struct usb_driver       *usb_driver;
 222         struct usb_dynids       dynids;
 223
 224         int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
 225         int (*attach) (struct usb_serial *serial);
 226         int (*calc_num_ports) (struct usb_serial *serial);
 227
 228         void (*shutdown) (struct usb_serial *serial);
 229
 230         int (*port_probe) (struct usb_serial_port *port);
 231         int (*port_remove) (struct usb_serial_port *port);
 232
 233         int (*suspend) (struct usb_serial *serial, pm_message_t message);
 234         int (*resume) (struct usb_serial *serial);
 235
 236         /* serial function calls */
 237         int  (*open)            (struct usb_serial_port *port, struct file * filp);
 238         void (*close)           (struct usb_serial_port *port, struct file * filp);
 239         int  (*write)           (struct usb_serial_port *port, const unsigned char *buf, int count);
 240         int  (*write_room)      (struct usb_serial_port *port);
 241         int  (*ioctl)           (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
 242         void (*set_termios)     (struct usb_serial_port *port, struct ktermios * old);
 243         void (*break_ctl)       (struct usb_serial_port *port, int break_state);
 244         int  (*chars_in_buffer) (struct usb_serial_port *port);
 245         void (*throttle)        (struct usb_serial_port *port);
 246         void (*unthrottle)      (struct usb_serial_port *port);
 247         int  (*tiocmget)        (struct usb_serial_port *port, struct file *file);
 248         int  (*tiocmset)        (struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
 249
 250         void (*read_int_callback)(struct urb *urb);
 251         void (*write_int_callback)(struct urb *urb);
 252         void (*read_bulk_callback)(struct urb *urb);
 253         void (*write_bulk_callback)(struct urb *urb);
 254 };
 255 #define to_usb_serial_driver(d) container_of(d, struct usb_serial_driver, driver)
 256
 257 extern int  usb_serial_register(struct usb_serial_driver *driver);
 258 extern void usb_serial_deregister(struct usb_serial_driver *driver);
 259 extern void usb_serial_port_softint(struct usb_serial_port *port);
 260
 261 extern int usb_serial_probe(struct usb_interface *iface, const struct usb_device_id *id);
 262 extern void usb_serial_disconnect(struct usb_interface *iface);
 263
 264 extern int usb_serial_suspend(struct usb_interface *intf, pm_message_t message);
 265 extern int usb_serial_resume(struct usb_interface *intf);
 266
 267 extern int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *data, int length, __u8 bRequest);
 268 extern int ezusb_set_reset (struct usb_serial *serial, unsigned char reset_bit);
 269
 270 /* USB Serial console functions */
 271 #ifdef CONFIG_USB_SERIAL_CONSOLE
 272 extern void usb_serial_console_init (int debug, int minor);
 273 extern void usb_serial_console_exit (void);
 274 extern void usb_serial_console_disconnect(struct usb_serial *serial);
 275 #else
 276 static inline void usb_serial_console_init (int debug, int minor) { }
 277 static inline void usb_serial_console_exit (void) { }
 278 static inline void usb_serial_console_disconnect(struct usb_serial *serial) {}
 279 #endif
 280
 281 /* Functions needed by other parts of the usbserial core */
 282 extern struct usb_serial *usb_serial_get_by_index (unsigned int minor);
 283 extern void usb_serial_put(struct usb_serial *serial);
 284 extern int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp);
 285 extern int usb_serial_generic_write (struct usb_serial_port *port, const unsigned char *buf, int count);
 286 extern void usb_serial_generic_close (struct usb_serial_port *port, struct file *filp);
 287 extern int usb_serial_generic_resume (struct usb_serial *serial);
 288 extern int usb_serial_generic_write_room (struct usb_serial_port *port);
 289 extern int usb_serial_generic_chars_in_buffer (struct usb_serial_port *port);
 290 extern void usb_serial_generic_read_bulk_callback (struct urb *urb);
 291 extern void usb_serial_generic_write_bulk_callback (struct urb *urb);
 292 extern void usb_serial_generic_throttle (struct usb_serial_port *port);
 293 extern void usb_serial_generic_unthrottle (struct usb_serial_port *port);
 294 extern void usb_serial_generic_shutdown (struct usb_serial *serial);
 295 extern int usb_serial_generic_register (int debug);
 296 extern void usb_serial_generic_deregister (void);
 297
 298 extern int usb_serial_bus_register (struct usb_serial_driver *device);
 299 extern void usb_serial_bus_deregister (struct usb_serial_driver *device);
 300
 301 extern struct usb_serial_driver usb_serial_generic_device;
 302 extern struct bus_type usb_serial_bus_type;
 303 extern struct tty_driver *usb_serial_tty_driver;
 304
 305 static inline void usb_serial_debug_data(int debug,
 306                                          struct device *dev,
 307                                          const char *function, int size,
 308                                          const unsigned char *data)
 309 {
 310         int i;
 311
 312         if (debug) {
 313                 dev_printk(KERN_DEBUG, dev, "%s - length = %d, data = ", function, size);
 314                 for (i = 0; i < size; ++i)
 315                         printk ("%.2x ", data[i]);
 316                 printk ("\n");
 317         }
 318 }
 319
 320 /* Use our own dbg macro */
 321 #undef dbg
 322 #define dbg(format, arg...) do { if (debug) printk(KERN_DEBUG "%s: " format "\n" , __FILE__ , ## arg); } while (0)
 323
 324
 325
 326 #endif  /* ifdef __LINUX_USB_SERIAL_H */
 327