include/net/mac802154.h

   1 /*
   2  * IEEE802.15.4-2003 specification
   3  *
   4  * Copyright (C) 2007-2012 Siemens AG
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License version 2
   8  * as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  *
  15  */
  16 #ifndef NET_MAC802154_H
  17 #define NET_MAC802154_H
  18
  19 #include <net/af_ieee802154.h>
  20 #include <linux/ieee802154.h>
  21 #include <linux/skbuff.h>
  22 #include <linux/unaligned/memmove.h>
  23
  24 #include <net/cfg802154.h>
  25
  26 /* General MAC frame format:
  27  *  2 bytes: Frame Control
  28  *  1 byte:  Sequence Number
  29  * 20 bytes: Addressing fields
  30  * 14 bytes: Auxiliary Security Header
  31  */
  32 #define MAC802154_FRAME_HARD_HEADER_LEN         (2 + 1 + 20 + 14)
  33
  34 /* The following flags are used to indicate changed address settings from
  35  * the stack to the hardware.
  36  */
  37
  38 /* indicates that the Short Address changed */
  39 #define IEEE802154_AFILT_SADDR_CHANGED          0x00000001
  40 /* indicates that the IEEE Address changed */
  41 #define IEEE802154_AFILT_IEEEADDR_CHANGED       0x00000002
  42 /* indicates that the PAN ID changed */
  43 #define IEEE802154_AFILT_PANID_CHANGED          0x00000004
  44 /* indicates that PAN Coordinator status changed */
  45 #define IEEE802154_AFILT_PANC_CHANGED           0x00000008
  46
  47 struct ieee802154_hw_addr_filt {
  48         __le16  pan_id;         /* Each independent PAN selects a unique
  49                                  * identifier. This PAN id allows communication
  50                                  * between devices within a network using short
  51                                  * addresses and enables transmissions between
  52                                  * devices across independent networks.
  53                                  */
  54         __le16  short_addr;
  55         __le64  ieee_addr;
  56         u8      pan_coord;
  57 };
  58
  59 struct ieee802154_vif {
  60         int type;
  61
  62         /* must be last */
  63         u8 drv_priv[0] __aligned(sizeof(void *));
  64 };
  65
  66 struct ieee802154_hw {
  67         /* filled by the driver */
  68         int     extra_tx_headroom;
  69         u32     flags;
  70         struct  device *parent;
  71
  72         /* filled by mac802154 core */
  73         struct  ieee802154_hw_addr_filt hw_filt;
  74         void    *priv;
  75         struct  wpan_phy *phy;
  76         size_t vif_data_size;
  77 };
  78
  79 /* Checksum is in hardware and is omitted from a packet
  80  *
  81  * These following flags are used to indicate hardware capabilities to
  82  * the stack. Generally, flags here should have their meaning
  83  * done in a way that the simplest hardware doesn't need setting
  84  * any particular flags. There are some exceptions to this rule,
  85  * however, so you are advised to review these flags carefully.
  86  */
  87
  88 /* Indicates that xmitter will add FCS on it's own. */
  89 #define IEEE802154_HW_TX_OMIT_CKSUM     0x00000001
  90 /* Indicates that receiver will autorespond with ACK frames. */
  91 #define IEEE802154_HW_AACK              0x00000002
  92 /* Indicates that transceiver will support transmit power setting. */
  93 #define IEEE802154_HW_TXPOWER           0x00000004
  94 /* Indicates that transceiver will support listen before transmit. */
  95 #define IEEE802154_HW_LBT               0x00000008
  96 /* Indicates that transceiver will support cca mode setting. */
  97 #define IEEE802154_HW_CCA_MODE          0x00000010
  98 /* Indicates that transceiver will support cca ed level setting. */
  99 #define IEEE802154_HW_CCA_ED_LEVEL      0x00000020
 100 /* Indicates that transceiver will support csma (max_be, min_be, csma retries)
 101  * settings. */
 102 #define IEEE802154_HW_CSMA_PARAMS       0x00000040
 103 /* Indicates that transceiver will support ARET frame retries setting. */
 104 #define IEEE802154_HW_FRAME_RETRIES     0x00000080
 105 /* Indicates that transceiver will support hardware address filter setting. */
 106 #define IEEE802154_HW_AFILT             0x00000100
 107 /* Indicates that transceiver will support promiscuous mode setting. */
 108 #define IEEE802154_HW_PROMISCUOUS       0x00000200
 109 /* Indicates that receiver omits FCS. */
 110 #define IEEE802154_HW_RX_OMIT_CKSUM     0x00000400
 111 /* Indicates that receiver will not filter frames with bad checksum. */
 112 #define IEEE802154_HW_RX_DROP_BAD_CKSUM 0x00000800
 113
 114 /* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */
 115 #define IEEE802154_HW_OMIT_CKSUM        (IEEE802154_HW_TX_OMIT_CKSUM | \
 116                                          IEEE802154_HW_RX_OMIT_CKSUM)
 117
 118 /* This groups the most common CSMA support fields into one. */
 119 #define IEEE802154_HW_CSMA              (IEEE802154_HW_CCA_MODE | \
 120                                          IEEE802154_HW_CCA_ED_LEVEL | \
 121                                          IEEE802154_HW_CSMA_PARAMS)
 122
 123 /* This groups the most common ARET support fields into one. */
 124 #define IEEE802154_HW_ARET              (IEEE802154_HW_CSMA | \
 125                                          IEEE802154_HW_FRAME_RETRIES)
 126
 127 /* struct ieee802154_ops - callbacks from mac802154 to the driver
 128  *
 129  * This structure contains various callbacks that the driver may
 130  * handle or, in some cases, must handle, for example to transmit
 131  * a frame.
 132  *
 133  * start: Handler that 802.15.4 module calls for device initialization.
 134  *        This function is called before the first interface is attached.
 135  *
 136  * stop:  Handler that 802.15.4 module calls for device cleanup.
 137  *        This function is called after the last interface is removed.
 138  *
 139  * xmit_sync:
 140  *        Handler that 802.15.4 module calls for each transmitted frame.
 141  *        skb cntains the buffer starting from the IEEE 802.15.4 header.
 142  *        The low-level driver should send the frame based on available
 143  *        configuration. This is called by a workqueue and useful for
 144  *        synchronous 802.15.4 drivers.
 145  *        This function should return zero or negative errno.
 146  *
 147  *        WARNING:
 148  *        This will be deprecated soon. We don't accept synced xmit callbacks
 149  *        drivers anymore.
 150  *
 151  * xmit_async:
 152  *        Handler that 802.15.4 module calls for each transmitted frame.
 153  *        skb cntains the buffer starting from the IEEE 802.15.4 header.
 154  *        The low-level driver should send the frame based on available
 155  *        configuration.
 156  *        This function should return zero or negative errno.
 157  *
 158  * ed:    Handler that 802.15.4 module calls for Energy Detection.
 159  *        This function should place the value for detected energy
 160  *        (usually device-dependant) in the level pointer and return
 161  *        either zero or negative errno. Called with pib_lock held.
 162  *
 163  * set_channel:
 164  *        Set radio for listening on specific channel.
 165  *        Set the device for listening on specified channel.
 166  *        Returns either zero, or negative errno. Called with pib_lock held.
 167  *
 168  * set_hw_addr_filt:
 169  *        Set radio for listening on specific address.
 170  *        Set the device for listening on specified address.
 171  *        Returns either zero, or negative errno.
 172  *
 173  * set_txpower:
 174  *        Set radio transmit power in dB. Called with pib_lock held.
 175  *        Returns either zero, or negative errno.
 176  *
 177  * set_lbt
 178  *        Enables or disables listen before talk on the device. Called with
 179  *        pib_lock held.
 180  *        Returns either zero, or negative errno.
 181  *
 182  * set_cca_mode
 183  *        Sets the CCA mode used by the device. Called with pib_lock held.
 184  *        Returns either zero, or negative errno.
 185  *
 186  * set_cca_ed_level
 187  *        Sets the CCA energy detection threshold in dBm. Called with pib_lock
 188  *        held.
 189  *        Returns either zero, or negative errno.
 190  *
 191  * set_csma_params
 192  *        Sets the CSMA parameter set for the PHY. Called with pib_lock held.
 193  *        Returns either zero, or negative errno.
 194  *
 195  * set_frame_retries
 196  *        Sets the retransmission attempt limit. Called with pib_lock held.
 197  *        Returns either zero, or negative errno.
 198  *
 199  * set_promiscuous_mode
 200  *        Enables or disable promiscuous mode.
 201  */
 202 struct ieee802154_ops {
 203         struct module   *owner;
 204         int             (*start)(struct ieee802154_hw *hw);
 205         void            (*stop)(struct ieee802154_hw *hw);
 206         int             (*xmit_sync)(struct ieee802154_hw *hw,
 207                                      struct sk_buff *skb);
 208         int             (*xmit_async)(struct ieee802154_hw *hw,
 209                                       struct sk_buff *skb);
 210         int             (*ed)(struct ieee802154_hw *hw, u8 *level);
 211         int             (*set_channel)(struct ieee802154_hw *hw, u8 page,
 212                                        u8 channel);
 213         int             (*set_hw_addr_filt)(struct ieee802154_hw *hw,
 214                                             struct ieee802154_hw_addr_filt *filt,
 215                                             unsigned long changed);
 216         int             (*set_txpower)(struct ieee802154_hw *hw, int db);
 217         int             (*set_lbt)(struct ieee802154_hw *hw, bool on);
 218         int             (*set_cca_mode)(struct ieee802154_hw *hw,
 219                                         const struct wpan_phy_cca *cca);
 220         int             (*set_cca_ed_level)(struct ieee802154_hw *hw,
 221                                             s32 level);
 222         int             (*set_csma_params)(struct ieee802154_hw *hw,
 223                                            u8 min_be, u8 max_be, u8 retries);
 224         int             (*set_frame_retries)(struct ieee802154_hw *hw,
 225                                              s8 retries);
 226         int             (*set_promiscuous_mode)(struct ieee802154_hw *hw,
 227                                                 const bool on);
 228 };
 229
 230 /**
 231  * ieee802154_be64_to_le64 - copies and convert be64 to le64
 232  * @le64_dst: le64 destination pointer
 233  * @be64_src: be64 source pointer
 234  */
 235 static inline void ieee802154_be64_to_le64(void *le64_dst, const void *be64_src)
 236 {
 237         __put_unaligned_memmove64(swab64p(be64_src), le64_dst);
 238 }
 239
 240 /**
 241  * ieee802154_le64_to_be64 - copies and convert le64 to be64
 242  * @be64_dst: be64 destination pointer
 243  * @le64_src: le64 source pointer
 244  */
 245 static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src)
 246 {
 247         __put_unaligned_memmove64(swab64p(le64_src), be64_dst);
 248 }
 249
 250 /* Basic interface to register ieee802154 hwice */
 251 struct ieee802154_hw *
 252 ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops);
 253 void ieee802154_free_hw(struct ieee802154_hw *hw);
 254 int ieee802154_register_hw(struct ieee802154_hw *hw);
 255 void ieee802154_unregister_hw(struct ieee802154_hw *hw);
 256
 257 void ieee802154_rx(struct ieee802154_hw *hw, struct sk_buff *skb);
 258 void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb,
 259                            u8 lqi);
 260
 261 void ieee802154_wake_queue(struct ieee802154_hw *hw);
 262 void ieee802154_stop_queue(struct ieee802154_hw *hw);
 263 void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb,
 264                               bool ifs_handling);
 265
 266 #endif /* NET_MAC802154_H */