include/opcode/m68k.h

   1 /* Opcode table header for m680[01234]0/m6888[12]/m68851.
   2    Copyright (C) 1989-2014 Free Software Foundation, Inc.
   3
   4    This file is part of GDB, GAS, and the GNU binutils.
   5
   6    GDB, GAS, and the GNU binutils are free software; you can redistribute
   7    them and/or modify them under the terms of the GNU General Public
   8    License as published by the Free Software Foundation; either version 3,
   9    or (at your option) any later version.
  10
  11    GDB, GAS, and the GNU binutils are distributed in the hope that they
  12    will be useful, but WITHOUT ANY WARRANTY; without even the implied
  13    warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
  14    the GNU General Public License for more details.
  15
  16    You should have received a copy of the GNU General Public License
  17    along with this file; see the file COPYING3.  If not, write to the Free
  18    Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
  19    02110-1301, USA.  */
  20
  21 /* These are used as bit flags for the arch field in the m68k_opcode
  22    structure.  */
  23 #define _m68k_undef  0
  24 #define m68000   0x001
  25 #define m68010   0x002
  26 #define m68020   0x004
  27 #define m68030   0x008
  28 #define m68040   0x010
  29 #define m68060   0x020
  30 #define m68881   0x040
  31 #define m68851   0x080
  32 #define cpu32    0x100          /* e.g., 68332 */
  33 #define fido_a   0x200
  34 #define m68k_mask  0x3ff
  35
  36 #define mcfmac   0x400          /* ColdFire MAC. */
  37 #define mcfemac  0x800          /* ColdFire EMAC. */
  38 #define cfloat   0x1000         /* ColdFire FPU.  */
  39 #define mcfhwdiv 0x2000         /* ColdFire hardware divide.  */
  40
  41 #define mcfisa_a 0x4000         /* ColdFire ISA_A.  */
  42 #define mcfisa_aa 0x8000        /* ColdFire ISA_A+.  */
  43 #define mcfisa_b 0x10000        /* ColdFire ISA_B.  */
  44 #define mcfisa_c 0x20000        /* ColdFire ISA_C.  */
  45 #define mcfusp   0x40000        /* ColdFire USP instructions.  */
  46 #define mcf_mask 0x7e400
  47
  48 /* Handy aliases.  */
  49 #define m68040up   (m68040 | m68060)
  50 #define m68030up   (m68030 | m68040up)
  51 #define m68020up   (m68020 | m68030up)
  52 #define m68010up   (m68010 | cpu32 | fido_a | m68020up)
  53 #define m68000up   (m68000 | m68010up)
  54
  55 #define mfloat  (m68881 | m68040 | m68060)
  56 #define mmmu    (m68851 | m68030 | m68040 | m68060)
  57
  58 /* The structure used to hold information for an opcode.  */
  59
  60 struct m68k_opcode
  61 {
  62   /* The opcode name.  */
  63   const char *name;
  64   /* The pseudo-size of the instruction(in bytes).  Used to determine
  65      number of bytes necessary to disassemble the instruction.  */
  66   unsigned int size;
  67   /* The opcode itself.  */
  68   unsigned long opcode;
  69   /* The mask used by the disassembler.  */
  70   unsigned long match;
  71   /* The arguments.  */
  72   const char *args;
  73   /* The architectures which support this opcode.  */
  74   unsigned int arch;
  75 };
  76
  77 /* The structure used to hold information for an opcode alias.  */
  78
  79 struct m68k_opcode_alias
  80 {
  81   /* The alias name.  */
  82   const char *alias;
  83   /* The instruction for which this is an alias.  */
  84   const char *primary;
  85 };
  86
  87 /* We store four bytes of opcode for all opcodes because that is the
  88    most any of them need.  The actual length of an instruction is
  89    always at least 2 bytes, and is as much longer as necessary to hold
  90    the operands it has.
  91
  92    The match field is a mask saying which bits must match particular
  93    opcode in order for an instruction to be an instance of that
  94    opcode.
  95
  96    The args field is a string containing two characters for each
  97    operand of the instruction.  The first specifies the kind of
  98    operand; the second, the place it is stored.
  99
 100    If the first char of args is '.', it indicates that the opcode is
 101    two words.  This is only necessary when the match field does not
 102    have any bits set in the second opcode word.  Such a '.' is skipped
 103    for operand processing.  */
 104
 105 /* Kinds of operands:
 106    Characters used: AaBbCcDdEeFfGgHIiJjKkLlMmnOopQqRrSsTtUuVvWwXxYyZz01234|*~%;@!&$?/<>#^+-
 107
 108    D  data register only.  Stored as 3 bits.
 109    A  address register only.  Stored as 3 bits.
 110    a  address register indirect only.  Stored as 3 bits.
 111    R  either kind of register.  Stored as 4 bits.
 112    r  either kind of register indirect only.  Stored as 4 bits.
 113       At the moment, used only for cas2 instruction.
 114    F  floating point coprocessor register only.   Stored as 3 bits.
 115    O  an offset (or width): immediate data 0-31 or data register.
 116       Stored as 6 bits in special format for BF... insns.
 117    +  autoincrement only.  Stored as 3 bits (number of the address register).
 118    -  autodecrement only.  Stored as 3 bits (number of the address register).
 119    Q  quick immediate data.  Stored as 3 bits.
 120       This matches an immediate operand only when value is in range 1 .. 8.
 121    M  moveq immediate data.  Stored as 8 bits.
 122       This matches an immediate operand only when value is in range -128..127
 123    T  trap vector immediate data.  Stored as 4 bits.
 124
 125    k  K-factor for fmove.p instruction.   Stored as a 7-bit constant or
 126       a three bit register offset, depending on the field type.
 127
 128    #  immediate data.  Stored in special places (b, w or l)
 129       which say how many bits to store.
 130    ^  immediate data for floating point instructions.   Special places
 131       are offset by 2 bytes from '#'...
 132    B  pc-relative address, converted to an offset
 133       that is treated as immediate data.
 134    d  displacement and register.  Stores the register as 3 bits
 135       and stores the displacement in the entire second word.
 136
 137    C  the CCR.  No need to store it; this is just for filtering validity.
 138    S  the SR.  No need to store, just as with CCR.
 139    U  the USP.  No need to store, just as with CCR.
 140    E  the MAC ACC.  No need to store, just as with CCR.
 141    e  the EMAC ACC[0123].
 142    G  the MAC/EMAC MACSR.  No need to store, just as with CCR.
 143    g  the EMAC ACCEXT{01,23}.
 144    H  the MASK.  No need to store, just as with CCR.
 145    i  the MAC/EMAC scale factor.
 146
 147    I  Coprocessor ID.   Not printed if 1.   The Coprocessor ID is always
 148       extracted from the 'd' field of word one, which means that an extended
 149       coprocessor opcode can be skipped using the 'i' place, if needed.
 150
 151    s  System Control register for the floating point coprocessor.
 152
 153    J  Misc register for movec instruction, stored in 'j' format.
 154         Possible values:
 155         0x000   SFC     Source Function Code reg        [60, 40, 30, 20, 10]
 156         0x001   DFC     Data Function Code reg          [60, 40, 30, 20, 10]
 157         0x002   CACR    Cache Control Register          [60, 40, 30, 20, mcf]
 158         0x003   TC      MMU Translation Control         [60, 40]
 159         0x004   ITT0    Instruction Transparent
 160                                 Translation reg 0       [60, 40]
 161         0x005   ITT1    Instruction Transparent
 162                                 Translation reg 1       [60, 40]
 163         0x006   DTT0    Data Transparent
 164                                 Translation reg 0       [60, 40]
 165         0x007   DTT1    Data Transparent
 166                                 Translation reg 1       [60, 40]
 167         0x008   BUSCR   Bus Control Register            [60]
 168         0x800   USP     User Stack Pointer              [60, 40, 30, 20, 10]
 169         0x801   VBR     Vector Base reg                 [60, 40, 30, 20, 10, mcf]
 170         0x802   CAAR    Cache Address Register          [        30, 20]
 171         0x803   MSP     Master Stack Pointer            [    40, 30, 20]
 172         0x804   ISP     Interrupt Stack Pointer         [    40, 30, 20]
 173         0x805   MMUSR   MMU Status reg                  [    40]
 174         0x806   URP     User Root Pointer               [60, 40]
 175         0x807   SRP     Supervisor Root Pointer         [60, 40]
 176         0x808   PCR     Processor Configuration reg     [60]
 177         0xC00   ROMBAR  ROM Base Address Register       [520X]
 178         0xC04   RAMBAR0 RAM Base Address Register 0     [520X]
 179         0xC05   RAMBAR1 RAM Base Address Register 0     [520X]
 180         0xC0F   MBAR0   RAM Base Address Register 0     [520X]
 181         0xC04   FLASHBAR FLASH Base Address Register    [mcf528x]
 182         0xC05   RAMBAR  Static RAM Base Address Register [mcf528x]
 183
 184     L  Register list of the type d0-d7/a0-a7 etc.
 185        (New!  Improved!  Can also hold fp0-fp7, as well!)
 186        The assembler tries to see if the registers match the insn by
 187        looking at where the insn wants them stored.
 188
 189     l  Register list like L, but with all the bits reversed.
 190        Used for going the other way. . .
 191
 192     c  cache identifier which may be "nc" for no cache, "ic"
 193        for instruction cache, "dc" for data cache, or "bc"
 194        for both caches.  Used in cinv and cpush.  Always
 195        stored in position "d".
 196
 197     u  Any register, with ``upper'' or ``lower'' specification.  Used
 198        in the mac instructions with size word.
 199
 200  The remainder are all stored as 6 bits using an address mode and a
 201  register number; they differ in which addressing modes they match.
 202
 203    *  all                                       (modes 0-6,7.0-4)
 204    ~  alterable memory                          (modes 2-6,7.0,7.1)
 205                                                 (not 0,1,7.2-4)
 206    %  alterable                                 (modes 0-6,7.0,7.1)
 207                                                 (not 7.2-4)
 208    ;  data                                      (modes 0,2-6,7.0-4)
 209                                                 (not 1)
 210    @  data, but not immediate                   (modes 0,2-6,7.0-3)
 211                                                 (not 1,7.4)
 212    !  control                                   (modes 2,5,6,7.0-3)
 213                                                 (not 0,1,3,4,7.4)
 214    &  alterable control                         (modes 2,5,6,7.0,7.1)
 215                                                 (not 0,1,3,4,7.2-4)
 216    $  alterable data                            (modes 0,2-6,7.0,7.1)
 217                                                 (not 1,7.2-4)
 218    ?  alterable control, or data register       (modes 0,2,5,6,7.0,7.1)
 219                                                 (not 1,3,4,7.2-4)
 220    /  control, or data register                 (modes 0,2,5,6,7.0-3)
 221                                                 (not 1,3,4,7.4)
 222    >  *save operands                            (modes 2,4,5,6,7.0,7.1)
 223                                                 (not 0,1,3,7.2-4)
 224    <  *restore operands                         (modes 2,3,5,6,7.0-3)
 225                                                 (not 0,1,4,7.4)
 226
 227    coldfire move operands:
 228    m                                            (modes 0-4)
 229    n                                            (modes 5,7.2)
 230    o                                            (modes 6,7.0,7.1,7.3,7.4)
 231    p                                            (modes 0-5)
 232
 233    coldfire bset/bclr/btst/mulsl/mulul operands:
 234    q                                            (modes 0,2-5)
 235    v                                            (modes 0,2-5,7.0,7.1)
 236    b                                            (modes 0,2-5,7.2)
 237    w                                            (modes 2-5,7.2)
 238    y                                            (modes 2,5)
 239    z                                            (modes 2,5,7.2)
 240    x  mov3q immediate operand.
 241    j  coprocessor ET operand.
 242    K  coprocessor command number.
 243    4                                            (modes 2,3,4,5)
 244   */
 245
 246 /* For the 68851:  */
 247 /* I didn't use much imagination in choosing the
 248    following codes, so many of them aren't very
 249    mnemonic. -rab
 250
 251    0  32 bit pmmu register
 252         Possible values:
 253         000     TC      Translation Control Register (68030, 68851)
 254
 255    1  16 bit pmmu register
 256         111     AC      Access Control (68851)
 257
 258    2  8 bit pmmu register
 259         100     CAL     Current Access Level (68851)
 260         101     VAL     Validate Access Level (68851)
 261         110     SCC     Stack Change Control (68851)
 262
 263    3  68030-only pmmu registers (32 bit)
 264         010     TT0     Transparent Translation reg 0
 265                         (aka Access Control reg 0 -- AC0 -- on 68ec030)
 266         011     TT1     Transparent Translation reg 1
 267                         (aka Access Control reg 1 -- AC1 -- on 68ec030)
 268
 269    W  wide pmmu registers
 270         Possible values:
 271         001     DRP     Dma Root Pointer (68851)
 272         010     SRP     Supervisor Root Pointer (68030, 68851)
 273         011     CRP     Cpu Root Pointer (68030, 68851)
 274
 275    f    function code register (68030, 68851)
 276         0       SFC
 277         1       DFC
 278
 279    V    VAL register only (68851)
 280
 281    X    BADx, BACx (16 bit)
 282         100     BAD     Breakpoint Acknowledge Data (68851)
 283         101     BAC     Breakpoint Acknowledge Control (68851)
 284
 285    Y    PSR (68851) (MMUSR on 68030) (ACUSR on 68ec030)
 286    Z    PCSR (68851)
 287
 288    |    memory          (modes 2-6, 7.*)
 289
 290    t  address test level (68030 only)
 291       Stored as 3 bits, range 0-7.
 292       Also used for breakpoint instruction now.
 293
 294 */
 295
 296 /* Places to put an operand, for non-general operands:
 297    Characters used: BbCcDdFfGgHhIijkLlMmNnostWw123456789/
 298
 299    s  source, low bits of first word.
 300    d  dest, shifted 9 in first word
 301    1  second word, shifted 12
 302    2  second word, shifted 6
 303    3  second word, shifted 0
 304    4  third word, shifted 12
 305    5  third word, shifted 6
 306    6  third word, shifted 0
 307    7  second word, shifted 7
 308    8  second word, shifted 10
 309    9  second word, shifted 5
 310    E  second word, shifted 9
 311    D  store in both place 1 and place 3; for divul and divsl.
 312    B  first word, low byte, for branch displacements
 313    W  second word (entire), for branch displacements
 314    L  second and third words (entire), for branch displacements
 315       (also overloaded for move16)
 316    b  second word, low byte
 317    w  second word (entire) [variable word/long branch offset for dbra]
 318    W  second word (entire) (must be signed 16 bit value)
 319    l  second and third word (entire)
 320    g  variable branch offset for bra and similar instructions.
 321       The place to store depends on the magnitude of offset.
 322    t  store in both place 7 and place 8; for floating point operations
 323    c  branch offset for cpBcc operations.
 324       The place to store is word two if bit six of word one is zero,
 325       and words two and three if bit six of word one is one.
 326    i  Increment by two, to skip over coprocessor extended operands.   Only
 327       works with the 'I' format.
 328    k  Dynamic K-factor field.   Bits 6-4 of word 2, used as a register number.
 329       Also used for dynamic fmovem instruction.
 330    C  floating point coprocessor constant - 7 bits.  Also used for static
 331       K-factors...
 332    j  Movec register #, stored in 12 low bits of second word.
 333    m  For M[S]ACx; 4 bits split with MSB shifted 6 bits in first word
 334       and remaining 3 bits of register shifted 9 bits in first word.
 335       Indicate upper/lower in 1 bit shifted 7 bits in second word.
 336       Use with `R' or `u' format.
 337    n  `m' withouth upper/lower indication. (For M[S]ACx; 4 bits split
 338       with MSB shifted 6 bits in first word and remaining 3 bits of
 339       register shifted 9 bits in first word.  No upper/lower
 340       indication is done.)  Use with `R' or `u' format.
 341    o  For M[S]ACw; 4 bits shifted 12 in second word (like `1').
 342       Indicate upper/lower in 1 bit shifted 7 bits in second word.
 343       Use with `R' or `u' format.
 344    M  For M[S]ACw; 4 bits in low bits of first word.  Indicate
 345       upper/lower in 1 bit shifted 6 bits in second word.  Use with
 346       `R' or `u' format.
 347    N  For M[S]ACw; 4 bits in low bits of second word.  Indicate
 348       upper/lower in 1 bit shifted 6 bits in second word.  Use with
 349       `R' or `u' format.
 350    h  shift indicator (scale factor), 1 bit shifted 10 in second word
 351
 352  Places to put operand, for general operands:
 353    d  destination, shifted 6 bits in first word
 354    b  source, at low bit of first word, and immediate uses one byte
 355    w  source, at low bit of first word, and immediate uses two bytes
 356    l  source, at low bit of first word, and immediate uses four bytes
 357    s  source, at low bit of first word.
 358       Used sometimes in contexts where immediate is not allowed anyway.
 359    f  single precision float, low bit of 1st word, immediate uses 4 bytes
 360    F  double precision float, low bit of 1st word, immediate uses 8 bytes
 361    x  extended precision float, low bit of 1st word, immediate uses 12 bytes
 362    p  packed float, low bit of 1st word, immediate uses 12 bytes
 363    G  EMAC accumulator, load  (bit 4 2nd word, !bit8 first word)
 364    H  EMAC accumulator, non load  (bit 4 2nd word, bit 8 first word)
 365    F  EMAC ACCx
 366    f  EMAC ACCy
 367    I  MAC/EMAC scale factor
 368    /  Like 's', but set 2nd word, bit 5 if trailing_ampersand set
 369    ]  first word, bit 10
 370 */
 371
 372 extern const struct m68k_opcode m68k_opcodes[];
 373 extern const struct m68k_opcode_alias m68k_opcode_aliases[];
 374
 375 extern const int m68k_numopcodes, m68k_numaliases;
 376
 377 /* end of m68k-opcode.h */