1 /* Opcode decoder for the Renesas RX
2 Copyright (C) 2008-2015 Free Software Foundation, Inc.
3 Written by DJ Delorie <dj@redhat.com>
5 This file is part of GDB, the GNU Debugger and GAS, the GNU Assembler.
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 3 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
22 /* The RX decoder in libopcodes is used by the simulator, gdb's
23 analyzer, and the disassembler. Given an opcode data source,
24 it decodes the next opcode into the following structures. */
29 RX_Byte
, /* undefined extension */
32 RX_Word
, /* undefined extension */
42 RX_Operand_Immediate
, /* #addend */
43 RX_Operand_Register
, /* Rn */
44 RX_Operand_Indirect
, /* [Rn + addend] */
45 RX_Operand_Postinc
, /* [Rn+] */
46 RX_Operand_Predec
, /* [-Rn] */
47 RX_Operand_Condition
, /* eq, gtu, etc */
48 RX_Operand_Flag
, /* [UIOSZC] */
49 RX_Operand_TwoReg
, /* [Rn + scale*R2] */
55 RXO_mov
, /* d = s (signed) */
56 RXO_movbi
, /* d = [s,s2] (signed) */
57 RXO_movbir
, /* [s,s2] = d (signed) */
58 RXO_pushm
, /* s..s2 */
60 RXO_xchg
, /* s <-> d */
61 RXO_stcc
, /* d = s if cond(s2) */
62 RXO_rtsd
, /* rtsd, 1=imm, 2-0 = reg if reg type */
64 /* These are all either d OP= s or, if s2 is set, d = s OP s2. Note
65 that d may be "None". */
78 RXO_adc
, /* d = d + s + carry */
79 RXO_sbb
, /* d = d - s - ~carry */
80 RXO_abs
, /* d = |s| */
81 RXO_max
, /* d = max(d,s) */
82 RXO_min
, /* d = min(d,s) */
83 RXO_emul
, /* d:64 = d:32 * s */
84 RXO_emulu
, /* d:64 = d:32 * s (unsigned) */
86 RXO_rolc
, /* d <<= 1 through carry */
87 RXO_rorc
, /* d >>= 1 through carry*/
88 RXO_rotl
, /* d <<= #s without carry */
89 RXO_rotr
, /* d >>= #s without carry*/
90 RXO_revw
, /* d = revw(s) */
91 RXO_revl
, /* d = revl(s) */
92 RXO_branch
, /* pc = d if cond(s) */
93 RXO_branchrel
,/* pc += d if cond(s) */
95 RXO_jsrrel
, /* pc += d */
121 RXO_sat
, /* sat(d) */
124 RXO_fadd
, /* d op= s */
133 RXO_bset
, /* d |= (1<<s) */
134 RXO_bclr
, /* d &= ~(1<<s) */
135 RXO_btst
, /* s & (1<<s2) */
136 RXO_bnot
, /* d ^= (1<<s) */
137 RXO_bmcc
, /* d<s> = cond(s2) */
139 RXO_clrpsw
, /* flag index in d */
140 RXO_setpsw
, /* flag index in d */
141 RXO_mvtipl
, /* new IPL in s */
145 RXO_rtd
, /* undocumented */
147 RXO_dbt
, /* undocumented */
148 RXO_int
, /* vector id in s */
152 RXO_sccnd
, /* d = cond(s) ? 1 : 0 */
155 /* Condition bitpatterns, as registers. */
172 #define RXC_always 14
177 RX_Operand_Type type
;
190 /* By convention, these are destination, source1, source2. */
191 RX_Opcode_Operand op
[3];
193 /* The logic here is:
194 newflags = (oldflags & ~(int)flags_0) | flags_1 | (op_flags & flags_s)
195 Only the O, S, Z, and C flags are affected. */
196 char flags_0
; /* This also clears out flags-to-be-set. */
201 /* Within the syntax, %c-style format specifiers are as follows:
204 %0 = operand[0] (destination)
205 %1 = operand[1] (source)
206 %2 = operand[2] (2nd source)
207 %s = operation size (b/w/l)
208 %SN = operand size [N] (N=0,1,2)
209 %aN = op[N] as an address (N=0,1,2)
211 Register numbers 0..15 are general registers. 16..31 are control
212 registers. 32..47 are condition codes. */
214 int rx_decode_opcode (unsigned long, RX_Opcode_Decoded
*, int (*)(void *), void *);
This page took 0.034369 seconds and 5 git commands to generate.