target: Fix MAINTENANCE_IN service action CDB checks to use lower 5 bits
[deliverable/linux.git] / include / target / target_core_base.h
1 #ifndef TARGET_CORE_BASE_H
2 #define TARGET_CORE_BASE_H
3
4 #include <linux/in.h>
5 #include <linux/configfs.h>
6 #include <linux/dma-mapping.h>
7 #include <linux/blkdev.h>
8 #include <scsi/scsi_cmnd.h>
9 #include <net/sock.h>
10 #include <net/tcp.h>
11
12 #define TARGET_CORE_MOD_VERSION "v4.1.0-rc2-ml"
13 #define TARGET_CORE_VERSION TARGET_CORE_MOD_VERSION
14
15 /* Maximum Number of LUNs per Target Portal Group */
16 /* Don't raise above 511 or REPORT_LUNS needs to handle >1 page */
17 #define TRANSPORT_MAX_LUNS_PER_TPG 256
18 /*
19 * By default we use 32-byte CDBs in TCM Core and subsystem plugin code.
20 *
21 * Note that both include/scsi/scsi_cmnd.h:MAX_COMMAND_SIZE and
22 * include/linux/blkdev.h:BLOCK_MAX_CDB as of v2.6.36-rc4 still use
23 * 16-byte CDBs by default and require an extra allocation for
24 * 32-byte CDBs to because of legacy issues.
25 *
26 * Within TCM Core there are no such legacy limitiations, so we go ahead
27 * use 32-byte CDBs by default and use include/scsi/scsi.h:scsi_command_size()
28 * within all TCM Core and subsystem plugin code.
29 */
30 #define TCM_MAX_COMMAND_SIZE 32
31 /*
32 * From include/scsi/scsi_cmnd.h:SCSI_SENSE_BUFFERSIZE, currently
33 * defined 96, but the real limit is 252 (or 260 including the header)
34 */
35 #define TRANSPORT_SENSE_BUFFER SCSI_SENSE_BUFFERSIZE
36 /* Used by transport_send_check_condition_and_sense() */
37 #define SPC_SENSE_KEY_OFFSET 2
38 #define SPC_ADD_SENSE_LEN_OFFSET 7
39 #define SPC_ASC_KEY_OFFSET 12
40 #define SPC_ASCQ_KEY_OFFSET 13
41 #define TRANSPORT_IQN_LEN 224
42 /* Used by target_core_store_alua_lu_gp() and target_core_alua_lu_gp_show_attr_members() */
43 #define LU_GROUP_NAME_BUF 256
44 /* Used by core_alua_store_tg_pt_gp_info() and target_core_alua_tg_pt_gp_show_attr_members() */
45 #define TG_PT_GROUP_NAME_BUF 256
46 /* Used to parse VPD into struct t10_vpd */
47 #define VPD_TMP_BUF_SIZE 128
48 /* Used by transport_generic_cmd_sequencer() */
49 #define READ_BLOCK_LEN 6
50 #define READ_CAP_LEN 8
51 #define READ_POSITION_LEN 20
52 #define INQUIRY_LEN 36
53 /* Used by transport_get_inquiry_vpd_serial() */
54 #define INQUIRY_VPD_SERIAL_LEN 254
55 /* Used by transport_get_inquiry_vpd_device_ident() */
56 #define INQUIRY_VPD_DEVICE_IDENTIFIER_LEN 254
57
58 /* Attempts before moving from SHORT to LONG */
59 #define PYX_TRANSPORT_WINDOW_CLOSED_THRESHOLD 3
60 #define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_SHORT 3 /* In milliseconds */
61 #define PYX_TRANSPORT_WINDOW_CLOSED_WAIT_LONG 10 /* In milliseconds */
62
63 #define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */
64
65 /*
66 * struct se_subsystem_dev->su_dev_flags
67 */
68 #define SDF_FIRMWARE_VPD_UNIT_SERIAL 0x00000001
69 #define SDF_EMULATED_VPD_UNIT_SERIAL 0x00000002
70 #define SDF_USING_UDEV_PATH 0x00000004
71 #define SDF_USING_ALIAS 0x00000008
72
73 /*
74 * struct se_device->dev_flags
75 */
76 #define DF_SPC2_RESERVATIONS 0x00000001
77 #define DF_SPC2_RESERVATIONS_WITH_ISID 0x00000002
78
79 /* struct se_dev_attrib sanity values */
80 /* Default max_unmap_lba_count */
81 #define DA_MAX_UNMAP_LBA_COUNT 0
82 /* Default max_unmap_block_desc_count */
83 #define DA_MAX_UNMAP_BLOCK_DESC_COUNT 0
84 /* Default unmap_granularity */
85 #define DA_UNMAP_GRANULARITY_DEFAULT 0
86 /* Default unmap_granularity_alignment */
87 #define DA_UNMAP_GRANULARITY_ALIGNMENT_DEFAULT 0
88 /* Default max transfer length */
89 #define DA_FABRIC_MAX_SECTORS 8192
90 /* Emulation for Direct Page Out */
91 #define DA_EMULATE_DPO 0
92 /* Emulation for Forced Unit Access WRITEs */
93 #define DA_EMULATE_FUA_WRITE 1
94 /* Emulation for Forced Unit Access READs */
95 #define DA_EMULATE_FUA_READ 0
96 /* Emulation for WriteCache and SYNCHRONIZE_CACHE */
97 #define DA_EMULATE_WRITE_CACHE 0
98 /* Emulation for UNIT ATTENTION Interlock Control */
99 #define DA_EMULATE_UA_INTLLCK_CTRL 0
100 /* Emulation for TASK_ABORTED status (TAS) by default */
101 #define DA_EMULATE_TAS 1
102 /* Emulation for Thin Provisioning UNMAP using block/blk-lib.c:blkdev_issue_discard() */
103 #define DA_EMULATE_TPU 0
104 /*
105 * Emulation for Thin Provisioning WRITE_SAME w/ UNMAP=1 bit using
106 * block/blk-lib.c:blkdev_issue_discard()
107 */
108 #define DA_EMULATE_TPWS 0
109 /* No Emulation for PSCSI by default */
110 #define DA_EMULATE_RESERVATIONS 0
111 /* No Emulation for PSCSI by default */
112 #define DA_EMULATE_ALUA 0
113 /* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */
114 #define DA_ENFORCE_PR_ISIDS 1
115 #define DA_STATUS_MAX_SECTORS_MIN 16
116 #define DA_STATUS_MAX_SECTORS_MAX 8192
117 /* By default don't report non-rotating (solid state) medium */
118 #define DA_IS_NONROT 0
119 /* Queue Algorithm Modifier default for restricted reordering in control mode page */
120 #define DA_EMULATE_REST_REORD 0
121
122 #define SE_INQUIRY_BUF 512
123 #define SE_MODE_PAGE_BUF 512
124
125 /* struct se_hba->hba_flags */
126 enum hba_flags_table {
127 HBA_FLAGS_INTERNAL_USE = 0x01,
128 HBA_FLAGS_PSCSI_MODE = 0x02,
129 };
130
131 /* struct se_lun->lun_status */
132 enum transport_lun_status_table {
133 TRANSPORT_LUN_STATUS_FREE = 0,
134 TRANSPORT_LUN_STATUS_ACTIVE = 1,
135 };
136
137 /* struct se_portal_group->se_tpg_type */
138 enum transport_tpg_type_table {
139 TRANSPORT_TPG_TYPE_NORMAL = 0,
140 TRANSPORT_TPG_TYPE_DISCOVERY = 1,
141 };
142
143 /* Special transport agnostic struct se_cmd->t_states */
144 enum transport_state_table {
145 TRANSPORT_NO_STATE = 0,
146 TRANSPORT_NEW_CMD = 1,
147 TRANSPORT_WRITE_PENDING = 3,
148 TRANSPORT_PROCESS_WRITE = 4,
149 TRANSPORT_PROCESSING = 5,
150 TRANSPORT_COMPLETE = 6,
151 TRANSPORT_PROCESS_TMR = 9,
152 TRANSPORT_ISTATE_PROCESSING = 11,
153 TRANSPORT_NEW_CMD_MAP = 16,
154 TRANSPORT_COMPLETE_QF_WP = 18,
155 TRANSPORT_COMPLETE_QF_OK = 19,
156 };
157
158 /* Used for struct se_cmd->se_cmd_flags */
159 enum se_cmd_flags_table {
160 SCF_SUPPORTED_SAM_OPCODE = 0x00000001,
161 SCF_TRANSPORT_TASK_SENSE = 0x00000002,
162 SCF_EMULATED_TASK_SENSE = 0x00000004,
163 SCF_SCSI_DATA_SG_IO_CDB = 0x00000008,
164 SCF_SCSI_CONTROL_SG_IO_CDB = 0x00000010,
165 SCF_SCSI_NON_DATA_CDB = 0x00000020,
166 SCF_SCSI_TMR_CDB = 0x00000040,
167 SCF_SCSI_CDB_EXCEPTION = 0x00000080,
168 SCF_SCSI_RESERVATION_CONFLICT = 0x00000100,
169 SCF_FUA = 0x00000200,
170 SCF_SE_LUN_CMD = 0x00000800,
171 SCF_SE_ALLOW_EOO = 0x00001000,
172 SCF_BIDI = 0x00002000,
173 SCF_SENT_CHECK_CONDITION = 0x00004000,
174 SCF_OVERFLOW_BIT = 0x00008000,
175 SCF_UNDERFLOW_BIT = 0x00010000,
176 SCF_SENT_DELAYED_TAS = 0x00020000,
177 SCF_ALUA_NON_OPTIMIZED = 0x00040000,
178 SCF_DELAYED_CMD_FROM_SAM_ATTR = 0x00080000,
179 SCF_UNUSED = 0x00100000,
180 SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC = 0x00200000,
181 SCF_ACK_KREF = 0x00400000,
182 };
183
184 /* struct se_dev_entry->lun_flags and struct se_lun->lun_access */
185 enum transport_lunflags_table {
186 TRANSPORT_LUNFLAGS_NO_ACCESS = 0x00,
187 TRANSPORT_LUNFLAGS_INITIATOR_ACCESS = 0x01,
188 TRANSPORT_LUNFLAGS_READ_ONLY = 0x02,
189 TRANSPORT_LUNFLAGS_READ_WRITE = 0x04,
190 };
191
192 /* struct se_device->dev_status */
193 enum transport_device_status_table {
194 TRANSPORT_DEVICE_ACTIVATED = 0x01,
195 TRANSPORT_DEVICE_DEACTIVATED = 0x02,
196 TRANSPORT_DEVICE_QUEUE_FULL = 0x04,
197 TRANSPORT_DEVICE_SHUTDOWN = 0x08,
198 TRANSPORT_DEVICE_OFFLINE_ACTIVATED = 0x10,
199 TRANSPORT_DEVICE_OFFLINE_DEACTIVATED = 0x20,
200 };
201
202 /*
203 * Used by transport_send_check_condition_and_sense() and se_cmd->scsi_sense_reason
204 * to signal which ASC/ASCQ sense payload should be built.
205 */
206 enum tcm_sense_reason_table {
207 TCM_NON_EXISTENT_LUN = 0x01,
208 TCM_UNSUPPORTED_SCSI_OPCODE = 0x02,
209 TCM_INCORRECT_AMOUNT_OF_DATA = 0x03,
210 TCM_UNEXPECTED_UNSOLICITED_DATA = 0x04,
211 TCM_SERVICE_CRC_ERROR = 0x05,
212 TCM_SNACK_REJECTED = 0x06,
213 TCM_SECTOR_COUNT_TOO_MANY = 0x07,
214 TCM_INVALID_CDB_FIELD = 0x08,
215 TCM_INVALID_PARAMETER_LIST = 0x09,
216 TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE = 0x0a,
217 TCM_UNKNOWN_MODE_PAGE = 0x0b,
218 TCM_WRITE_PROTECTED = 0x0c,
219 TCM_CHECK_CONDITION_ABORT_CMD = 0x0d,
220 TCM_CHECK_CONDITION_UNIT_ATTENTION = 0x0e,
221 TCM_CHECK_CONDITION_NOT_READY = 0x0f,
222 TCM_RESERVATION_CONFLICT = 0x10,
223 };
224
225 enum target_sc_flags_table {
226 TARGET_SCF_BIDI_OP = 0x01,
227 TARGET_SCF_ACK_KREF = 0x02,
228 TARGET_SCF_UNKNOWN_SIZE = 0x04,
229 };
230
231 /* fabric independent task management function values */
232 enum tcm_tmreq_table {
233 TMR_ABORT_TASK = 1,
234 TMR_ABORT_TASK_SET = 2,
235 TMR_CLEAR_ACA = 3,
236 TMR_CLEAR_TASK_SET = 4,
237 TMR_LUN_RESET = 5,
238 TMR_TARGET_WARM_RESET = 6,
239 TMR_TARGET_COLD_RESET = 7,
240 TMR_FABRIC_TMR = 255,
241 };
242
243 /* fabric independent task management response values */
244 enum tcm_tmrsp_table {
245 TMR_FUNCTION_COMPLETE = 0,
246 TMR_TASK_DOES_NOT_EXIST = 1,
247 TMR_LUN_DOES_NOT_EXIST = 2,
248 TMR_TASK_STILL_ALLEGIANT = 3,
249 TMR_TASK_FAILOVER_NOT_SUPPORTED = 4,
250 TMR_TASK_MGMT_FUNCTION_NOT_SUPPORTED = 5,
251 TMR_FUNCTION_AUTHORIZATION_FAILED = 6,
252 TMR_FUNCTION_REJECTED = 255,
253 };
254
255 struct se_obj {
256 atomic_t obj_access_count;
257 };
258
259 /*
260 * Used by TCM Core internally to signal if ALUA emulation is enabled or
261 * disabled, or running in with TCM/pSCSI passthrough mode
262 */
263 typedef enum {
264 SPC_ALUA_PASSTHROUGH,
265 SPC2_ALUA_DISABLED,
266 SPC3_ALUA_EMULATED
267 } t10_alua_index_t;
268
269 /*
270 * Used by TCM Core internally to signal if SAM Task Attribute emulation
271 * is enabled or disabled, or running in with TCM/pSCSI passthrough mode
272 */
273 typedef enum {
274 SAM_TASK_ATTR_PASSTHROUGH,
275 SAM_TASK_ATTR_UNTAGGED,
276 SAM_TASK_ATTR_EMULATED
277 } t10_task_attr_index_t;
278
279 /*
280 * Used for target SCSI statistics
281 */
282 typedef enum {
283 SCSI_INST_INDEX,
284 SCSI_DEVICE_INDEX,
285 SCSI_AUTH_INTR_INDEX,
286 SCSI_INDEX_TYPE_MAX
287 } scsi_index_t;
288
289 struct se_cmd;
290
291 struct t10_alua {
292 t10_alua_index_t alua_type;
293 /* ALUA Target Port Group ID */
294 u16 alua_tg_pt_gps_counter;
295 u32 alua_tg_pt_gps_count;
296 spinlock_t tg_pt_gps_lock;
297 struct se_subsystem_dev *t10_sub_dev;
298 /* Used for default ALUA Target Port Group */
299 struct t10_alua_tg_pt_gp *default_tg_pt_gp;
300 /* Used for default ALUA Target Port Group ConfigFS group */
301 struct config_group alua_tg_pt_gps_group;
302 int (*alua_state_check)(struct se_cmd *, unsigned char *, u8 *);
303 struct list_head tg_pt_gps_list;
304 };
305
306 struct t10_alua_lu_gp {
307 u16 lu_gp_id;
308 int lu_gp_valid_id;
309 u32 lu_gp_members;
310 atomic_t lu_gp_ref_cnt;
311 spinlock_t lu_gp_lock;
312 struct config_group lu_gp_group;
313 struct list_head lu_gp_node;
314 struct list_head lu_gp_mem_list;
315 };
316
317 struct t10_alua_lu_gp_member {
318 bool lu_gp_assoc;
319 atomic_t lu_gp_mem_ref_cnt;
320 spinlock_t lu_gp_mem_lock;
321 struct t10_alua_lu_gp *lu_gp;
322 struct se_device *lu_gp_mem_dev;
323 struct list_head lu_gp_mem_list;
324 };
325
326 struct t10_alua_tg_pt_gp {
327 u16 tg_pt_gp_id;
328 int tg_pt_gp_valid_id;
329 int tg_pt_gp_alua_access_status;
330 int tg_pt_gp_alua_access_type;
331 int tg_pt_gp_nonop_delay_msecs;
332 int tg_pt_gp_trans_delay_msecs;
333 int tg_pt_gp_pref;
334 int tg_pt_gp_write_metadata;
335 /* Used by struct t10_alua_tg_pt_gp->tg_pt_gp_md_buf_len */
336 #define ALUA_MD_BUF_LEN 1024
337 u32 tg_pt_gp_md_buf_len;
338 u32 tg_pt_gp_members;
339 atomic_t tg_pt_gp_alua_access_state;
340 atomic_t tg_pt_gp_ref_cnt;
341 spinlock_t tg_pt_gp_lock;
342 struct mutex tg_pt_gp_md_mutex;
343 struct se_subsystem_dev *tg_pt_gp_su_dev;
344 struct config_group tg_pt_gp_group;
345 struct list_head tg_pt_gp_list;
346 struct list_head tg_pt_gp_mem_list;
347 };
348
349 struct t10_alua_tg_pt_gp_member {
350 bool tg_pt_gp_assoc;
351 atomic_t tg_pt_gp_mem_ref_cnt;
352 spinlock_t tg_pt_gp_mem_lock;
353 struct t10_alua_tg_pt_gp *tg_pt_gp;
354 struct se_port *tg_pt;
355 struct list_head tg_pt_gp_mem_list;
356 };
357
358 struct t10_vpd {
359 unsigned char device_identifier[INQUIRY_VPD_DEVICE_IDENTIFIER_LEN];
360 int protocol_identifier_set;
361 u32 protocol_identifier;
362 u32 device_identifier_code_set;
363 u32 association;
364 u32 device_identifier_type;
365 struct list_head vpd_list;
366 };
367
368 struct t10_wwn {
369 char vendor[8];
370 char model[16];
371 char revision[4];
372 char unit_serial[INQUIRY_VPD_SERIAL_LEN];
373 spinlock_t t10_vpd_lock;
374 struct se_subsystem_dev *t10_sub_dev;
375 struct config_group t10_wwn_group;
376 struct list_head t10_vpd_list;
377 };
378
379
380 /*
381 * Used by TCM Core internally to signal if >= SPC-3 persistent reservations
382 * emulation is enabled or disabled, or running in with TCM/pSCSI passthrough
383 * mode
384 */
385 typedef enum {
386 SPC_PASSTHROUGH,
387 SPC2_RESERVATIONS,
388 SPC3_PERSISTENT_RESERVATIONS
389 } t10_reservations_index_t;
390
391 struct t10_pr_registration {
392 /* Used for fabrics that contain WWN+ISID */
393 #define PR_REG_ISID_LEN 16
394 /* PR_REG_ISID_LEN + ',i,0x' */
395 #define PR_REG_ISID_ID_LEN (PR_REG_ISID_LEN + 5)
396 char pr_reg_isid[PR_REG_ISID_LEN];
397 /* Used during APTPL metadata reading */
398 #define PR_APTPL_MAX_IPORT_LEN 256
399 unsigned char pr_iport[PR_APTPL_MAX_IPORT_LEN];
400 /* Used during APTPL metadata reading */
401 #define PR_APTPL_MAX_TPORT_LEN 256
402 unsigned char pr_tport[PR_APTPL_MAX_TPORT_LEN];
403 /* For writing out live meta data */
404 unsigned char *pr_aptpl_buf;
405 u16 pr_aptpl_rpti;
406 u16 pr_reg_tpgt;
407 /* Reservation effects all target ports */
408 int pr_reg_all_tg_pt;
409 /* Activate Persistence across Target Power Loss */
410 int pr_reg_aptpl;
411 int pr_res_holder;
412 int pr_res_type;
413 int pr_res_scope;
414 /* Used for fabric initiator WWPNs using a ISID */
415 bool isid_present_at_reg;
416 u32 pr_res_mapped_lun;
417 u32 pr_aptpl_target_lun;
418 u32 pr_res_generation;
419 u64 pr_reg_bin_isid;
420 u64 pr_res_key;
421 atomic_t pr_res_holders;
422 struct se_node_acl *pr_reg_nacl;
423 struct se_dev_entry *pr_reg_deve;
424 struct se_lun *pr_reg_tg_pt_lun;
425 struct list_head pr_reg_list;
426 struct list_head pr_reg_abort_list;
427 struct list_head pr_reg_aptpl_list;
428 struct list_head pr_reg_atp_list;
429 struct list_head pr_reg_atp_mem_list;
430 };
431
432 /*
433 * This set of function pointer ops is set based upon SPC3_PERSISTENT_RESERVATIONS,
434 * SPC2_RESERVATIONS or SPC_PASSTHROUGH in drivers/target/target_core_pr.c:
435 * core_setup_reservations()
436 */
437 struct t10_reservation_ops {
438 int (*t10_reservation_check)(struct se_cmd *, u32 *);
439 int (*t10_seq_non_holder)(struct se_cmd *, unsigned char *, u32);
440 int (*t10_pr_register)(struct se_cmd *);
441 int (*t10_pr_clear)(struct se_cmd *);
442 };
443
444 struct t10_reservation {
445 /* Reservation effects all target ports */
446 int pr_all_tg_pt;
447 /* Activate Persistence across Target Power Loss enabled
448 * for SCSI device */
449 int pr_aptpl_active;
450 /* Used by struct t10_reservation->pr_aptpl_buf_len */
451 #define PR_APTPL_BUF_LEN 8192
452 u32 pr_aptpl_buf_len;
453 u32 pr_generation;
454 t10_reservations_index_t res_type;
455 spinlock_t registration_lock;
456 spinlock_t aptpl_reg_lock;
457 /*
458 * This will always be set by one individual I_T Nexus.
459 * However with all_tg_pt=1, other I_T Nexus from the
460 * same initiator can access PR reg/res info on a different
461 * target port.
462 *
463 * There is also the 'All Registrants' case, where there is
464 * a single *pr_res_holder of the reservation, but all
465 * registrations are considered reservation holders.
466 */
467 struct se_node_acl *pr_res_holder;
468 struct list_head registration_list;
469 struct list_head aptpl_reg_list;
470 struct t10_reservation_ops pr_ops;
471 };
472
473 struct se_queue_obj {
474 atomic_t queue_cnt;
475 spinlock_t cmd_queue_lock;
476 struct list_head qobj_list;
477 wait_queue_head_t thread_wq;
478 };
479
480 struct se_tmr_req {
481 /* Task Management function to be performed */
482 u8 function;
483 /* Task Management response to send */
484 u8 response;
485 int call_transport;
486 /* Reference to ITT that Task Mgmt should be performed */
487 u32 ref_task_tag;
488 /* 64-bit encoded SAM LUN from $FABRIC_MOD TMR header */
489 u64 ref_task_lun;
490 void *fabric_tmr_ptr;
491 struct se_cmd *task_cmd;
492 struct se_cmd *ref_cmd;
493 struct se_device *tmr_dev;
494 struct se_lun *tmr_lun;
495 struct list_head tmr_list;
496 };
497
498 struct se_cmd {
499 /* SAM response code being sent to initiator */
500 u8 scsi_status;
501 u8 scsi_asc;
502 u8 scsi_ascq;
503 u8 scsi_sense_reason;
504 u16 scsi_sense_length;
505 /* Delay for ALUA Active/NonOptimized state access in milliseconds */
506 int alua_nonop_delay;
507 /* See include/linux/dma-mapping.h */
508 enum dma_data_direction data_direction;
509 /* For SAM Task Attribute */
510 int sam_task_attr;
511 /* Transport protocol dependent state, see transport_state_table */
512 enum transport_state_table t_state;
513 /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */
514 unsigned check_release:1;
515 unsigned cmd_wait_set:1;
516 unsigned unknown_data_length:1;
517 /* See se_cmd_flags_table */
518 u32 se_cmd_flags;
519 u32 se_ordered_id;
520 /* Total size in bytes associated with command */
521 u32 data_length;
522 /* SCSI Presented Data Transfer Length */
523 u32 cmd_spdtl;
524 u32 residual_count;
525 u32 orig_fe_lun;
526 /* Persistent Reservation key */
527 u64 pr_res_key;
528 /* Used for sense data */
529 void *sense_buffer;
530 struct list_head se_delayed_node;
531 struct list_head se_lun_node;
532 struct list_head se_qf_node;
533 struct se_device *se_dev;
534 struct se_dev_entry *se_deve;
535 struct se_lun *se_lun;
536 /* Only used for internal passthrough and legacy TCM fabric modules */
537 struct se_session *se_sess;
538 struct se_tmr_req *se_tmr_req;
539 struct list_head se_queue_node;
540 struct list_head se_cmd_list;
541 struct completion cmd_wait_comp;
542 struct kref cmd_kref;
543 struct target_core_fabric_ops *se_tfo;
544 int (*execute_cmd)(struct se_cmd *);
545 void (*transport_complete_callback)(struct se_cmd *);
546
547 unsigned char *t_task_cdb;
548 unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE];
549 unsigned long long t_task_lba;
550 atomic_t t_fe_count;
551 unsigned int transport_state;
552 #define CMD_T_ABORTED (1 << 0)
553 #define CMD_T_ACTIVE (1 << 1)
554 #define CMD_T_COMPLETE (1 << 2)
555 #define CMD_T_QUEUED (1 << 3)
556 #define CMD_T_SENT (1 << 4)
557 #define CMD_T_STOP (1 << 5)
558 #define CMD_T_FAILED (1 << 6)
559 #define CMD_T_LUN_STOP (1 << 7)
560 #define CMD_T_LUN_FE_STOP (1 << 8)
561 #define CMD_T_DEV_ACTIVE (1 << 9)
562 #define CMD_T_REQUEST_STOP (1 << 10)
563 #define CMD_T_BUSY (1 << 11)
564 spinlock_t t_state_lock;
565 struct completion t_transport_stop_comp;
566 struct completion transport_lun_fe_stop_comp;
567 struct completion transport_lun_stop_comp;
568
569 struct work_struct work;
570
571 struct scatterlist *t_data_sg;
572 unsigned int t_data_nents;
573 void *t_data_vmap;
574 struct scatterlist *t_bidi_data_sg;
575 unsigned int t_bidi_data_nents;
576
577 struct list_head execute_list;
578 struct list_head state_list;
579 bool state_active;
580
581 /* old task stop completion, consider merging with some of the above */
582 struct completion task_stop_comp;
583
584 /* backend private data */
585 void *priv;
586 };
587
588 struct se_ua {
589 u8 ua_asc;
590 u8 ua_ascq;
591 struct se_node_acl *ua_nacl;
592 struct list_head ua_dev_list;
593 struct list_head ua_nacl_list;
594 };
595
596 struct se_node_acl {
597 char initiatorname[TRANSPORT_IQN_LEN];
598 /* Used to signal demo mode created ACL, disabled by default */
599 bool dynamic_node_acl;
600 bool acl_stop:1;
601 u32 queue_depth;
602 u32 acl_index;
603 u64 num_cmds;
604 u64 read_bytes;
605 u64 write_bytes;
606 spinlock_t stats_lock;
607 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
608 atomic_t acl_pr_ref_count;
609 struct se_dev_entry **device_list;
610 struct se_session *nacl_sess;
611 struct se_portal_group *se_tpg;
612 spinlock_t device_list_lock;
613 spinlock_t nacl_sess_lock;
614 struct config_group acl_group;
615 struct config_group acl_attrib_group;
616 struct config_group acl_auth_group;
617 struct config_group acl_param_group;
618 struct config_group acl_fabric_stat_group;
619 struct config_group *acl_default_groups[5];
620 struct list_head acl_list;
621 struct list_head acl_sess_list;
622 struct completion acl_free_comp;
623 struct kref acl_kref;
624 };
625
626 struct se_session {
627 unsigned sess_tearing_down:1;
628 u64 sess_bin_isid;
629 struct se_node_acl *se_node_acl;
630 struct se_portal_group *se_tpg;
631 void *fabric_sess_ptr;
632 struct list_head sess_list;
633 struct list_head sess_acl_list;
634 struct list_head sess_cmd_list;
635 struct list_head sess_wait_list;
636 spinlock_t sess_cmd_lock;
637 struct kref sess_kref;
638 };
639
640 struct se_device;
641 struct se_transform_info;
642 struct scatterlist;
643
644 struct se_ml_stat_grps {
645 struct config_group stat_group;
646 struct config_group scsi_auth_intr_group;
647 struct config_group scsi_att_intr_port_group;
648 };
649
650 struct se_lun_acl {
651 char initiatorname[TRANSPORT_IQN_LEN];
652 u32 mapped_lun;
653 struct se_node_acl *se_lun_nacl;
654 struct se_lun *se_lun;
655 struct list_head lacl_list;
656 struct config_group se_lun_group;
657 struct se_ml_stat_grps ml_stat_grps;
658 };
659
660 struct se_dev_entry {
661 bool def_pr_registered;
662 /* See transport_lunflags_table */
663 u32 lun_flags;
664 u32 deve_cmds;
665 u32 mapped_lun;
666 u32 average_bytes;
667 u32 last_byte_count;
668 u32 total_cmds;
669 u32 total_bytes;
670 u64 pr_res_key;
671 u64 creation_time;
672 u32 attach_count;
673 u64 read_bytes;
674 u64 write_bytes;
675 atomic_t ua_count;
676 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
677 atomic_t pr_ref_count;
678 struct se_lun_acl *se_lun_acl;
679 spinlock_t ua_lock;
680 struct se_lun *se_lun;
681 struct list_head alua_port_list;
682 struct list_head ua_list;
683 };
684
685 struct se_dev_limits {
686 /* Max supported HW queue depth */
687 u32 hw_queue_depth;
688 /* Max supported virtual queue depth */
689 u32 queue_depth;
690 /* From include/linux/blkdev.h for the other HW/SW limits. */
691 struct queue_limits limits;
692 };
693
694 struct se_dev_attrib {
695 int emulate_dpo;
696 int emulate_fua_write;
697 int emulate_fua_read;
698 int emulate_write_cache;
699 int emulate_ua_intlck_ctrl;
700 int emulate_tas;
701 int emulate_tpu;
702 int emulate_tpws;
703 int emulate_reservations;
704 int emulate_alua;
705 int enforce_pr_isids;
706 int is_nonrot;
707 int emulate_rest_reord;
708 u32 hw_block_size;
709 u32 block_size;
710 u32 hw_max_sectors;
711 u32 fabric_max_sectors;
712 u32 optimal_sectors;
713 u32 hw_queue_depth;
714 u32 queue_depth;
715 u32 max_unmap_lba_count;
716 u32 max_unmap_block_desc_count;
717 u32 unmap_granularity;
718 u32 unmap_granularity_alignment;
719 struct se_subsystem_dev *da_sub_dev;
720 struct config_group da_group;
721 };
722
723 struct se_dev_stat_grps {
724 struct config_group stat_group;
725 struct config_group scsi_dev_group;
726 struct config_group scsi_tgt_dev_group;
727 struct config_group scsi_lu_group;
728 };
729
730 struct se_subsystem_dev {
731 /* Used for struct se_subsystem_dev-->se_dev_alias, must be less than PAGE_SIZE */
732 #define SE_DEV_ALIAS_LEN 512
733 unsigned char se_dev_alias[SE_DEV_ALIAS_LEN];
734 /* Used for struct se_subsystem_dev->se_dev_udev_path[], must be less than PAGE_SIZE */
735 #define SE_UDEV_PATH_LEN 512
736 unsigned char se_dev_udev_path[SE_UDEV_PATH_LEN];
737 u32 su_dev_flags;
738 struct se_hba *se_dev_hba;
739 struct se_device *se_dev_ptr;
740 struct se_dev_attrib se_dev_attrib;
741 /* T10 Asymmetric Logical Unit Assignment for Target Ports */
742 struct t10_alua t10_alua;
743 /* T10 Inquiry and VPD WWN Information */
744 struct t10_wwn t10_wwn;
745 /* T10 SPC-2 + SPC-3 Reservations */
746 struct t10_reservation t10_pr;
747 spinlock_t se_dev_lock;
748 void *se_dev_su_ptr;
749 struct config_group se_dev_group;
750 /* For T10 Reservations */
751 struct config_group se_dev_pr_group;
752 /* For target_core_stat.c groups */
753 struct se_dev_stat_grps dev_stat_grps;
754 };
755
756 struct se_device {
757 /* RELATIVE TARGET PORT IDENTIFER Counter */
758 u16 dev_rpti_counter;
759 /* Used for SAM Task Attribute ordering */
760 u32 dev_cur_ordered_id;
761 u32 dev_flags;
762 u32 dev_port_count;
763 /* See transport_device_status_table */
764 u32 dev_status;
765 /* Physical device queue depth */
766 u32 queue_depth;
767 /* Used for SPC-2 reservations enforce of ISIDs */
768 u64 dev_res_bin_isid;
769 t10_task_attr_index_t dev_task_attr_type;
770 /* Pointer to transport specific device structure */
771 void *dev_ptr;
772 u32 dev_index;
773 u64 creation_time;
774 u32 num_resets;
775 u64 num_cmds;
776 u64 read_bytes;
777 u64 write_bytes;
778 spinlock_t stats_lock;
779 /* Active commands on this virtual SE device */
780 atomic_t simple_cmds;
781 atomic_t dev_ordered_id;
782 atomic_t execute_tasks;
783 atomic_t dev_ordered_sync;
784 atomic_t dev_qf_count;
785 struct se_obj dev_obj;
786 struct se_obj dev_access_obj;
787 struct se_obj dev_export_obj;
788 struct se_queue_obj dev_queue_obj;
789 spinlock_t delayed_cmd_lock;
790 spinlock_t execute_task_lock;
791 spinlock_t dev_reservation_lock;
792 spinlock_t dev_status_lock;
793 spinlock_t se_port_lock;
794 spinlock_t se_tmr_lock;
795 spinlock_t qf_cmd_lock;
796 /* Used for legacy SPC-2 reservationsa */
797 struct se_node_acl *dev_reserved_node_acl;
798 /* Used for ALUA Logical Unit Group membership */
799 struct t10_alua_lu_gp_member *dev_alua_lu_gp_mem;
800 /* Used for SPC-3 Persistent Reservations */
801 struct t10_pr_registration *dev_pr_res_holder;
802 struct list_head dev_sep_list;
803 struct list_head dev_tmr_list;
804 /* Pointer to descriptor for processing thread */
805 struct task_struct *process_thread;
806 struct work_struct qf_work_queue;
807 struct list_head delayed_cmd_list;
808 struct list_head execute_list;
809 struct list_head state_list;
810 struct list_head qf_cmd_list;
811 /* Pointer to associated SE HBA */
812 struct se_hba *se_hba;
813 struct se_subsystem_dev *se_sub_dev;
814 /* Pointer to template of function pointers for transport */
815 struct se_subsystem_api *transport;
816 /* Linked list for struct se_hba struct se_device list */
817 struct list_head dev_list;
818 };
819
820 struct se_hba {
821 u16 hba_tpgt;
822 u32 hba_id;
823 /* See hba_flags_table */
824 u32 hba_flags;
825 /* Virtual iSCSI devices attached. */
826 u32 dev_count;
827 u32 hba_index;
828 /* Pointer to transport specific host structure. */
829 void *hba_ptr;
830 /* Linked list for struct se_device */
831 struct list_head hba_dev_list;
832 struct list_head hba_node;
833 spinlock_t device_lock;
834 struct config_group hba_group;
835 struct mutex hba_access_mutex;
836 struct se_subsystem_api *transport;
837 };
838
839 struct se_port_stat_grps {
840 struct config_group stat_group;
841 struct config_group scsi_port_group;
842 struct config_group scsi_tgt_port_group;
843 struct config_group scsi_transport_group;
844 };
845
846 struct se_lun {
847 /* See transport_lun_status_table */
848 enum transport_lun_status_table lun_status;
849 u32 lun_access;
850 u32 lun_flags;
851 u32 unpacked_lun;
852 atomic_t lun_acl_count;
853 spinlock_t lun_acl_lock;
854 spinlock_t lun_cmd_lock;
855 spinlock_t lun_sep_lock;
856 struct completion lun_shutdown_comp;
857 struct list_head lun_cmd_list;
858 struct list_head lun_acl_list;
859 struct se_device *lun_se_dev;
860 struct se_port *lun_sep;
861 struct config_group lun_group;
862 struct se_port_stat_grps port_stat_grps;
863 };
864
865 struct scsi_port_stats {
866 u64 cmd_pdus;
867 u64 tx_data_octets;
868 u64 rx_data_octets;
869 };
870
871 struct se_port {
872 /* RELATIVE TARGET PORT IDENTIFER */
873 u16 sep_rtpi;
874 int sep_tg_pt_secondary_stat;
875 int sep_tg_pt_secondary_write_md;
876 u32 sep_index;
877 struct scsi_port_stats sep_stats;
878 /* Used for ALUA Target Port Groups membership */
879 atomic_t sep_tg_pt_secondary_offline;
880 /* Used for PR ALL_TG_PT=1 */
881 atomic_t sep_tg_pt_ref_cnt;
882 spinlock_t sep_alua_lock;
883 struct mutex sep_tg_pt_md_mutex;
884 struct t10_alua_tg_pt_gp_member *sep_alua_tg_pt_gp_mem;
885 struct se_lun *sep_lun;
886 struct se_portal_group *sep_tpg;
887 struct list_head sep_alua_list;
888 struct list_head sep_list;
889 };
890
891 struct se_tpg_np {
892 struct se_portal_group *tpg_np_parent;
893 struct config_group tpg_np_group;
894 };
895
896 struct se_portal_group {
897 /* Type of target portal group, see transport_tpg_type_table */
898 enum transport_tpg_type_table se_tpg_type;
899 /* Number of ACLed Initiator Nodes for this TPG */
900 u32 num_node_acls;
901 /* Used for PR SPEC_I_PT=1 and REGISTER_AND_MOVE */
902 atomic_t tpg_pr_ref_count;
903 /* Spinlock for adding/removing ACLed Nodes */
904 spinlock_t acl_node_lock;
905 /* Spinlock for adding/removing sessions */
906 spinlock_t session_lock;
907 spinlock_t tpg_lun_lock;
908 /* Pointer to $FABRIC_MOD portal group */
909 void *se_tpg_fabric_ptr;
910 struct list_head se_tpg_node;
911 /* linked list for initiator ACL list */
912 struct list_head acl_node_list;
913 struct se_lun **tpg_lun_list;
914 struct se_lun tpg_virt_lun0;
915 /* List of TCM sessions associated wth this TPG */
916 struct list_head tpg_sess_list;
917 /* Pointer to $FABRIC_MOD dependent code */
918 struct target_core_fabric_ops *se_tpg_tfo;
919 struct se_wwn *se_tpg_wwn;
920 struct config_group tpg_group;
921 struct config_group *tpg_default_groups[6];
922 struct config_group tpg_lun_group;
923 struct config_group tpg_np_group;
924 struct config_group tpg_acl_group;
925 struct config_group tpg_attrib_group;
926 struct config_group tpg_param_group;
927 };
928
929 struct se_wwn {
930 struct target_fabric_configfs *wwn_tf;
931 struct config_group wwn_group;
932 struct config_group *wwn_default_groups[2];
933 struct config_group fabric_stat_group;
934 };
935
936 #endif /* TARGET_CORE_BASE_H */
This page took 0.080228 seconds and 5 git commands to generate.