ld/scripttempl/armbpabi.sc

   1 # This variant of elf.sc is used for ARM BPABI platforms, like Symbian
   2 # OS, where a separate postlinker will operated on the generated
   3 # executable or shared object.  See elf.sc for configuration variables
   4 # that apply; only BPABI-specific variables will be noted here.
   5
   6 test -z "$ENTRY" && ENTRY=_start
   7 test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
   8 test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
   9 if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
  10 test -z "${ELFSIZE}" && ELFSIZE=32
  11 test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
  12 test "$LD_FLAG" = "N" && DATA_ADDR=.
  13 test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
  14 test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
  15 test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
  16 DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
  17 DATA_SEGMENT_RELRO_END=""
  18 DATA_SEGMENT_RELRO_GOTPLT_END=""
  19 DATA_SEGMENT_END=""
  20 if test -n "${COMMONPAGESIZE}"; then
  21   DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
  22   DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
  23   if test -n "${SEPARATE_GOTPLT}"; then
  24     DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (. + ${SEPARATE_GOTPLT});"
  25   else
  26     DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (.);"
  27   fi
  28 fi
  29 INTERP=".interp       0 : { *(.interp) }"
  30 PLT=".plt          ${RELOCATING-0} : { *(.plt) }"
  31 RODATA=".rodata       ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
  32 DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }"
  33 STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }"
  34 if test -z "${NO_SMALL_DATA}"; then
  35   SBSS=".sbss         ${RELOCATING-0} :
  36   {
  37     ${RELOCATING+PROVIDE (__sbss_start = .);}
  38     ${RELOCATING+PROVIDE (___sbss_start = .);}
  39     *(.dynsbss)
  40     *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
  41     *(.scommon)
  42     ${RELOCATING+PROVIDE (__sbss_end = .);}
  43     ${RELOCATING+PROVIDE (___sbss_end = .);}
  44   }"
  45   SBSS2=".sbss2        ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
  46   SDATA="/* We want the small data sections together, so single-instruction offsets
  47      can access them all, and initialized data all before uninitialized, so
  48      we can shorten the on-disk segment size.  */
  49   .sdata        ${RELOCATING-0} :
  50   {
  51     ${RELOCATING+${SDATA_START_SYMBOLS}}
  52     *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
  53   }"
  54   SDATA2=".sdata2       ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }"
  55   REL_SDATA=".rel.sdata    ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
  56   .rela.sdata   ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
  57   REL_SBSS=".rel.sbss     ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
  58   .rela.sbss    ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
  59   REL_SDATA2=".rel.sdata2   ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
  60   .rela.sdata2  ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
  61   REL_SBSS2=".rel.sbss2    ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
  62   .rela.sbss2   ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
  63 else
  64   NO_SMALL_DATA=" "
  65 fi
  66 test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
  67 CTOR=".ctors        ${CONSTRUCTING-0} :
  68   {
  69     ${CONSTRUCTING+${CTOR_START}}
  70     /* gcc uses crtbegin.o to find the start of
  71        the constructors, so we make sure it is
  72        first.  Because this is a wildcard, it
  73        doesn't matter if the user does not
  74        actually link against crtbegin.o; the
  75        linker won't look for a file to match a
  76        wildcard.  The wildcard also means that it
  77        doesn't matter which directory crtbegin.o
  78        is in.  */
  79
  80     KEEP (*crtbegin*.o(.ctors))
  81
  82     /* We don't want to include the .ctor section from
  83        from the crtend.o file until after the sorted ctors.
  84        The .ctor section from the crtend file contains the
  85        end of ctors marker and it must be last */
  86
  87     KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors))
  88     KEEP (*(SORT(.ctors.*)))
  89     KEEP (*(.ctors))
  90     ${CONSTRUCTING+${CTOR_END}}
  91   }"
  92 DTOR=".dtors        ${CONSTRUCTING-0} :
  93   {
  94     ${CONSTRUCTING+${DTOR_START}}
  95     KEEP (*crtbegin*.o(.dtors))
  96     KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors))
  97     KEEP (*(SORT(.dtors.*)))
  98     KEEP (*(.dtors))
  99     ${CONSTRUCTING+${DTOR_END}}
 100   }"
 101 STACK="  .stack        ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
 102   {
 103     ${RELOCATING+_stack = .;}
 104     *(.stack)
 105   }"
 106
 107 TEXT_START_ADDR="SEGMENT_START(\"text\", ${TEXT_START_ADDR})"
 108 SHLIB_TEXT_START_ADDR="SEGMENT_START(\"text\", ${SHLIB_TEXT_START_ADDR:-0})"
 109 DATA_ADDR="SEGMENT_START(\"data\", ${DATA_ADDR-${DATA_SEGMENT_ALIGN}})"
 110 SHLIB_DATA_ADDR="SEGMENT_START(\"data\", ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}})"
 111
 112 # if this is for an embedded system, don't add SIZEOF_HEADERS.
 113 if [ -z "$EMBEDDED" ]; then
 114    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
 115    SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR} + SIZEOF_HEADERS"
 116 else
 117    test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
 118    SHLIB_BASE_ADDRESS="${SHLIB_TEXT_START_ADDR}"
 119 fi
 120
 121 cat <<EOF
 122 OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
 123               "${LITTLE_OUTPUT_FORMAT}")
 124 OUTPUT_ARCH(${OUTPUT_ARCH})
 125 ENTRY(${ENTRY})
 126
 127 ${RELOCATING+${LIB_SEARCH_DIRS}}
 128 ${RELOCATING+/* Do we need any of these for elf?
 129    __DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}}  */}
 130 ${RELOCATING+${EXECUTABLE_SYMBOLS}}
 131 ${RELOCATING+${INPUT_FILES}}
 132 ${RELOCATING- /* For some reason, the Solaris linker makes bad executables
 133   if gld -r is used and the intermediate file has sections starting
 134   at non-zero addresses.  Could be a Solaris ld bug, could be a GNU ld
 135   bug.  But for now assigning the zero vmas works.  */}
 136
 137 /* ARM's proprietary toolchain generate these symbols to match the start
 138    and end of particular sections of the image.  SymbianOS uses these
 139    symbols.  We provide them for compatibility with ARM's toolchains.
 140    These symbols should be bound locally; each shared object may define
 141    its own version of these symbols.  */
 142
 143 VERSION
 144 {
 145   /* Give these a dummy version to work around linker lameness.
 146      The name used shouldn't matter as these are all local symbols.  */
 147   __GNU {
 148     local:
 149       Image\$\$ER_RO\$\$Base;
 150       Image\$\$ER_RO\$\$Limit;
 151       SHT\$\$INIT_ARRAY\$\$Base;
 152       SHT\$\$INIT_ARRAY\$\$Limit;
 153       .ARM.exidx\$\$Base;
 154       .ARM.exidx\$\$Limit;
 155   };
 156 }
 157
 158 SECTIONS
 159 {
 160   /* Read-only sections, merged into text segment: */
 161   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR});}}}
 162
 163   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+ . = ${TEXT_BASE_ADDRESS};}}}
 164   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}}
 165   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_BASE_ADDRESS};}}
 166
 167   /* Define Image\$\$ER_RO\$\$Base.  */
 168   ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Base = .);}
 169
 170   ${INITIAL_READONLY_SECTIONS}
 171
 172 EOF
 173 cat <<EOF
 174   .init         ${RELOCATING-0} :
 175   {
 176     ${RELOCATING+${INIT_START}}
 177     KEEP (*(.init))
 178     ${RELOCATING+${INIT_END}}
 179   } =${NOP-0}
 180   .text         ${RELOCATING-0} :
 181   {
 182     ${RELOCATING+${TEXT_START_SYMBOLS}}
 183     *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
 184     KEEP (*(.text.*personality*))
 185     /* .gnu.warning sections are handled specially by elf32.em.  */
 186     *(.gnu.warning)
 187     ${RELOCATING+${OTHER_TEXT_SECTIONS}}
 188   } =${NOP-0}
 189   .fini         ${RELOCATING-0} :
 190   {
 191     ${RELOCATING+${FINI_START}}
 192     KEEP (*(.fini))
 193     ${RELOCATING+${FINI_END}}
 194   } =${NOP-0}
 195   /* The SymbianOS kernel requires that the PLT go at the end of the
 196      text section.  */
 197   ${DATA_PLT-${BSS_PLT-${PLT}}}
 198   ${RELOCATING+PROVIDE (__etext = .);}
 199   ${RELOCATING+PROVIDE (_etext = .);}
 200   ${RELOCATING+PROVIDE (etext = .);}
 201
 202   /* Define Image\$\$ER_RO\$\$Limit.  */
 203   ${RELOCATING+PROVIDE (Image\$\$ER_RO\$\$Limit = .);}
 204
 205   ${WRITABLE_RODATA-${RODATA}}
 206   .rodata1      ${RELOCATING-0} : { *(.rodata1) }
 207   ${CREATE_SHLIB-${SDATA2}}
 208   ${CREATE_SHLIB-${SBSS2}}
 209
 210   /* On SymbianOS, put  .init_array and friends in the read-only
 211      segment; there is no runtime relocation applied to these
 212      arrays.  */
 213
 214   /* Ensure the __preinit_array_start label is properly aligned.  We
 215      could instead move the label definition inside the section, but
 216      the linker would then create the section even if it turns out to
 217      be empty, which isn't pretty.  */
 218   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 219   ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}}
 220   .preinit_array   ${RELOCATING-0} : { *(.preinit_array) }
 221   ${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}}
 222
 223   ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}}
 224   /* SymbianOS uses this symbol.  */
 225   ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Base = .);}
 226   .init_array   ${RELOCATING-0} : { *(.init_array) }
 227   /* SymbianOS uses this symbol.  */
 228   ${RELOCATING+PROVIDE (SHT\$\$INIT_ARRAY\$\$Limit = .);}
 229   ${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}}
 230
 231   ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}}
 232   .fini_array   ${RELOCATING-0} : { *(.fini_array) }
 233   ${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}}
 234
 235   ${OTHER_READONLY_SECTIONS}
 236   .eh_frame_hdr : { *(.eh_frame_hdr) }
 237   .eh_frame     ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
 238   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
 239
 240   /* Adjust the address for the data segment.  We want to adjust up to
 241      the same address within the page on the next page up.  */
 242   ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR};}}}
 243   ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR};}}
 244   ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR};}}
 245
 246   /* Exception handling  */
 247   .eh_frame     ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
 248   .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) }
 249
 250   /* Thread Local Storage sections  */
 251   .tdata        ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
 252   .tbss         ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
 253
 254   ${RELOCATING+${CTOR}}
 255   ${RELOCATING+${DTOR}}
 256   .jcr          ${RELOCATING-0} : { KEEP (*(.jcr)) }
 257
 258   ${RELOCATING+${DATARELRO}}
 259   ${OTHER_RELRO_SECTIONS}
 260   ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
 261
 262   ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
 263
 264   .data         ${RELOCATING-0} :
 265   {
 266     ${RELOCATING+${DATA_START_SYMBOLS}}
 267     *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
 268     KEEP (*(.gnu.linkonce.d.*personality*))
 269     ${CONSTRUCTING+SORT(CONSTRUCTORS)}
 270   }
 271   .data1        ${RELOCATING-0} : { *(.data1) }
 272   ${WRITABLE_RODATA+${RODATA}}
 273   ${OTHER_READWRITE_SECTIONS}
 274   ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
 275   ${CREATE_SHLIB+${SDATA2}}
 276   ${CREATE_SHLIB+${SBSS2}}
 277   ${SDATA}
 278   ${OTHER_SDATA_SECTIONS}
 279   ${RELOCATING+_edata = .;}
 280   ${RELOCATING+PROVIDE (edata = .);}
 281   ${RELOCATING+. = DEFINED(__bss_segment_start) ? __bss_segment_start : .;}
 282   ${RELOCATING+__bss_start = .;}
 283   ${RELOCATING+${OTHER_BSS_SYMBOLS}}
 284   ${SBSS}
 285   ${BSS_PLT+${PLT}}
 286   .bss          ${RELOCATING-0} :
 287   {
 288    *(.dynbss)
 289    *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
 290    *(COMMON)
 291    /* Align here to ensure that the .bss section occupies space up to
 292       _end.  Align after .bss to ensure correct alignment even if the
 293       .bss section disappears because there are no input sections.  */
 294    ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 295   }
 296   ${OTHER_BSS_SECTIONS}
 297   ${RELOCATING+. = ALIGN(${ALIGNMENT});}
 298   ${RELOCATING+_end = .;}
 299   ${RELOCATING+${OTHER_END_SYMBOLS}}
 300   ${RELOCATING+PROVIDE (end = .);}
 301   ${RELOCATING+${DATA_SEGMENT_END}}
 302
 303   /* These sections are not mapped under the BPABI.  */
 304   .dynamic      0 : { *(.dynamic) }
 305   .hash         0 : { *(.hash) }
 306   .dynsym       0 : { *(.dynsym) }
 307   .dynstr       0 : { *(.dynstr) }
 308   .gnu.version  0 : { *(.gnu.version) }
 309   .gnu.version_d 0: { *(.gnu.version_d) }
 310   .gnu.version_r 0: { *(.gnu.version_r) }
 311   ${CREATE_SHLIB-${INTERP}}
 312
 313   /* Stabs debugging sections.  */
 314   .stab          0 : { *(.stab) }
 315   .stabstr       0 : { *(.stabstr) }
 316   .stab.excl     0 : { *(.stab.excl) }
 317   .stab.exclstr  0 : { *(.stab.exclstr) }
 318   .stab.index    0 : { *(.stab.index) }
 319   .stab.indexstr 0 : { *(.stab.indexstr) }
 320
 321   .comment       0 : { *(.comment) }
 322
 323   /* DWARF debug sections.
 324      Symbols in the DWARF debugging sections are relative to the beginning
 325      of the section so we begin them at 0.  */
 326
 327   /* DWARF 1 */
 328   .debug          0 : { *(.debug) }
 329   .line           0 : { *(.line) }
 330
 331   /* GNU DWARF 1 extensions */
 332   .debug_srcinfo  0 : { *(.debug_srcinfo) }
 333   .debug_sfnames  0 : { *(.debug_sfnames) }
 334
 335   /* DWARF 1.1 and DWARF 2 */
 336   .debug_aranges  0 : { *(.debug_aranges) }
 337   .debug_pubnames 0 : { *(.debug_pubnames) }
 338
 339   /* DWARF 2 */
 340   .debug_info     0 : { *(.debug_info .gnu.linkonce.wi.*) }
 341   .debug_abbrev   0 : { *(.debug_abbrev) }
 342   .debug_line     0 : { *(.debug_line) }
 343   .debug_frame    0 : { *(.debug_frame) }
 344   .debug_str      0 : { *(.debug_str) }
 345   .debug_loc      0 : { *(.debug_loc) }
 346   .debug_macinfo  0 : { *(.debug_macinfo) }
 347
 348   /* SGI/MIPS DWARF 2 extensions */
 349   .debug_weaknames 0 : { *(.debug_weaknames) }
 350   .debug_funcnames 0 : { *(.debug_funcnames) }
 351   .debug_typenames 0 : { *(.debug_typenames) }
 352   .debug_varnames  0 : { *(.debug_varnames) }
 353
 354   ${STACK_ADDR+${STACK}}
 355   ${OTHER_SECTIONS}
 356   ${RELOCATING+${OTHER_END_SYMBOLS}}
 357   ${RELOCATING+${STACKNOTE}}
 358 EOF
 359
 360 # These relocations sections are part of the read-only segment in SVR4
 361 # executables, but are not mapped in BPABI executables.
 362 if [ "x$COMBRELOC" = x ]; then
 363   COMBRELOCCAT=cat
 364 else
 365   COMBRELOCCAT="cat > $COMBRELOC"
 366 fi
 367 eval $COMBRELOCCAT <<EOF
 368   .rel.init     0 : { *(.rel.init) }
 369   .rela.init    0 : { *(.rela.init) }
 370   .rel.text     0 : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
 371   .rela.text    0 : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
 372   .rel.fini     0 : { *(.rel.fini) }
 373   .rela.fini    0 : { *(.rela.fini) }
 374   .rel.rodata   0 : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
 375   .rela.rodata  0 : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
 376   ${OTHER_READONLY_RELOC_SECTIONS}
 377   .rel.data.rel.ro 0 : { *(.rel.data.rel.ro${RELOCATING+*}) }
 378   .rela.data.rel.ro 0 : { *(.rel.data.rel.ro${RELOCATING+*}) }
 379   .rel.data     0 : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
 380   .rela.data    0 : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
 381   .rel.tdata    0 : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
 382   .rela.tdata   0 : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
 383   .rel.tbss     0 : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
 384   .rela.tbss    0 : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
 385   .rel.ctors    0 : { *(.rel.ctors) }
 386   .rela.ctors   0 : { *(.rela.ctors) }
 387   .rel.dtors    0 : { *(.rel.dtors) }
 388   .rela.dtors   0 : { *(.rela.dtors) }
 389   ${REL_SDATA}
 390   ${REL_SBSS}
 391   ${REL_SDATA2}
 392   ${REL_SBSS2}
 393   .rel.bss      0 : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
 394   .rela.bss     0 : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
 395   .rel.init_array  0 : { *(.rel.init_array) }
 396   .rela.init_array 0 : { *(.rela.init_array) }
 397   .rel.fini_array  0 : { *(.rel.fini_array) }
 398   .rela.fini_array 0 : { *(.rela.fini_array) }
 399 EOF
 400 if [ -n "$COMBRELOC" ]; then
 401 cat <<EOF
 402   .rel.dyn      0 :
 403     {
 404 EOF
 405 sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/      \1/' $COMBRELOC
 406 cat <<EOF
 407     }
 408   .rela.dyn     0 :
 409     {
 410 EOF
 411 sed -e '/^[     ]*[{}][         ]*$/d;/:[       ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/      \1/' $COMBRELOC
 412 cat <<EOF
 413     }
 414 EOF
 415 fi
 416 cat <<EOF
 417   .rel.plt      0 : { *(.rel.plt) }
 418   .rela.plt     0 : { *(.rela.plt) }
 419   ${OTHER_PLT_RELOC_SECTIONS}
 420   .rel.other    0 : { *(.rel.*) }
 421   .rela.other   0 : { *(.rela.*) }
 422   .reli.other   0 : { *(.reli.*) }
 423 }
 424 EOF